strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

18 files changed, 0 insertions, 1184 deletions

diff --git a/target/linux/au1000-2.6/Makefile b/target/linux/au1000-2.6/Makefile
deleted file mode 100644
index d7b9f73..0000000
--- a/target/linux/au1000-2.6/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=mipsel
-BOARD:=au1000
-BOARDNAME:=AMD Alchemy AU1x00
-FEATURES:=jffs2 usb pci
-
-LINUX_VERSION:=2.6.22.4
-
-define Target/Description
-	Build firmware for AMD Alchemy 1500 boards
-	(e.g. 4G-Systems Mesh/Access Cube ...)
-endef
-
-include $(INCLUDE_DIR)/kernel-build.mk
-DEFAULT_PACKAGES += yamonenv
-
-define Kernel/BuildImage
-	$(call Kernel/BuildImage/Default)
-	$(CP) $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.flash.srec $(LINUX_DIR)/zImage.flash.srec
-	$(CP) $(LINUX_DIR)/arch/mips/boot/compressed/images/zImage.srec $(LINUX_DIR)/zImage.srec
-endef
-
-# include the profiles
--include profiles/*.mk
-
-$(eval $(call BuildKernel))
-
diff --git a/target/linux/au1000-2.6/base-files/default/etc/diag.sh b/target/linux/au1000-2.6/base-files/default/etc/diag.sh
deleted file mode 100644
index d974615..0000000
--- a/target/linux/au1000-2.6/base-files/default/etc/diag.sh
+++ /dev/null
@@ -1,25 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2007 OpenWrt.org
-
-set_led() {
-	local led="$1"
-	local state="$2"
-	[ -d "/sys/class/leds/mtx1:$led" ] && echo "$state" > "/sys/class/leds/mtx1:$led/brightness"
-}
-
-set_state() {
-	case "$1" in
-		preinit)
-			set_led green 0
-			set_led red 1
-		;;
-		failsafe)
-			set_led green 1
-			set_led red 1
-		;;
-		done)
-			set_led green 1
-			set_led red 0
-		;;
-	esac
-}
diff --git a/target/linux/au1000-2.6/config/default b/target/linux/au1000-2.6/config/default
deleted file mode 100644
index e197928..0000000
--- a/target/linux/au1000-2.6/config/default
+++ /dev/null
@@ -1,252 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_64BIT_PHYS_ADDR=y
-# CONFIG_8139TOO is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-# CONFIG_ATM is not set
-# CONFIG_B44 is not set
-CONFIG_BASE_SMALL=0
-CONFIG_BITREVERSE=y
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_CHR_DEV_SG=m
-CONFIG_CMDLINE="root=/dev/mtdblock0 rootfstype=squashfs,jffs2 init=/etc/preinit"
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CRAMFS=m
-CONFIG_CRC16=y
-# CONFIG_DDB5477 is not set
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DUMMY=m
-CONFIG_ELF_CORE=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_48 is not set
-CONFIG_I2C=m
-CONFIG_I2C_ALGOBIT=m
-CONFIG_I2C_ALGOPCA=m
-CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_AU1X00GPIO=m
-CONFIG_I2C_CHARDEV=m
-# CONFIG_IDE is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_LEDS_MTX1=y
-# CONFIG_LEDS_TRIGGERS is not set
-CONFIG_MACH_ALCHEMY=y
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_ATLAS is not set
-CONFIG_MIPS_AU1X00_ENET=y
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_EV64120 is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_MIRAGE is not set
-CONFIG_MIPS_MTX1=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_MIPS_XXS1500 is not set
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_ALCHEMY is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_CONCAT=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-CONFIG_MTD_MTX1=y
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_MTX1_WATCHDOG=y
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NETDEV_1000 is not set
-CONFIG_NF_CONNTRACK=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CT_ACCT=y
-# CONFIG_NF_NAT_AMANDA is not set
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_NEEDED=y
-# CONFIG_NF_NAT_PPTP is not set
-CONFIG_NF_NAT_SIP=m
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PCIPCWATCHDOG is not set
-CONFIG_PHYLIB=y
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNPACPI is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PPP_MPPE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_QSEMI_PHY is not set
-CONFIG_RESOURCES_64BIT=y
-# CONFIG_RTC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_AU1X00=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SND_AU1X00 is not set
-CONFIG_SOC_AU1500=y
-CONFIG_SOC_AU1X00=y
-CONFIG_SOFT_WATCHDOG=m
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_STANDALONE is not set
-CONFIG_STRIP=m
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_KGDB=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TC35815 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_VIA_RHINE is not set
-CONFIG_WDT_MTX1=y
-CONFIG_ZONE_DMA=y
-CONFIG_ZONE_DMA_FLAG=1
diff --git a/target/linux/au1000-2.6/files/drivers/leds/leds-mtx1.c b/target/linux/au1000-2.6/files/drivers/leds/leds-mtx1.c
deleted file mode 100644
index 4c2ab55..0000000
--- a/target/linux/au1000-2.6/files/drivers/leds/leds-mtx1.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * LED driver for MTX-1 boards
- *
- * Copyright 2007 Florian Fainelli <florian@openwrt.org>
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-#include <asm/gpio.h>
-
-static struct platform_device *pdev;
-
-static void mtx1_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
-{
-	if (!strcmp("mtx1:green", led_cdev->name))
-		gpio_set_value(211, brightness ? 1 : 0);
-	else
-		gpio_set_value(212, brightness ? 1 : 0);
-}
-
-static struct led_classdev mtx1_green_led = {
-	.name = "mtx1:green",
-	.brightness_set = mtx1_led_set,
-};
-
-static struct led_classdev mtx1_red_led = {
-	.name = "mtx1:red",
-	.brightness_set = mtx1_led_set,
-};
-
-static int mtx1_leds_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = led_classdev_register(&pdev->dev, &mtx1_green_led);
-	if (ret < 0)
-		goto out;
-
-	ret = led_classdev_register(&pdev->dev, &mtx1_red_led);
-	if (ret < 0)
-		led_classdev_unregister(&mtx1_green_led);
-
-out:
-	return ret;
-}
-
-static int mtx1_leds_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&mtx1_green_led);
-	led_classdev_unregister(&mtx1_red_led);
-	return 0;
-}
-
-static struct platform_driver mtx1_leds_driver = {
-	.probe = mtx1_leds_probe,
-	.remove = mtx1_leds_remove,
-	.driver = {
-		.name = "mtx1-leds",
-	}
-};
-
-static int __init mtx1_leds_init(void)
-{
-	int ret;
-
-        ret = platform_driver_register(&mtx1_leds_driver);
-        if (ret < 0)
-                goto out;
-
-        pdev = platform_device_register_simple("mtx1-leds", -1, NULL, 0);
-        if (IS_ERR(pdev)) {
-                ret = PTR_ERR(pdev);
-                platform_driver_unregister(&mtx1_leds_driver);
-                goto out;
-        }
-
-out:
-        return ret;
-
-}
-		
-static void __exit mtx1_leds_exit(void)
-{
-	platform_device_unregister(pdev);
-	platform_driver_unregister(&mtx1_leds_driver);
-}
-
-module_init(mtx1_leds_init);
-module_exit(mtx1_leds_exit);
-		
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("MTX-1 LED driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/au1000-2.6/image/Makefile b/target/linux/au1000-2.6/image/Makefile
deleted file mode 100644
index 1d4aa47..0000000
--- a/target/linux/au1000-2.6/image/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-LOADADDR = 0x81000000		# RAM start + 16M 
-KERNEL_ENTRY = 0x80100000
-RAMSIZE = 0x00100000		# 1MB
-
-FLASH_KERNEL := 0xBFD00000
-FLASH_FS     := 0xBE000000
-
-LOADER_MAKEOPTS= \
-		KDIR=$(KDIR) \
-		LOADADDR=$(LOADADDR) \
-		KERNEL_ENTRY=$(KERNEL_ENTRY) \
-		RAMSIZE=$(RAMSIZE)
-
-define Build/Clean
-	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean
-endef
-
-DROP_SECTIONS := .reginfo .mdebug .comment .note .pdr .options .MIPS.options
-OBJCOPY_SREC := $(TARGET_CROSS)objcopy -S -O srec $(addprefix --remove-section=,$(DROP_SECTIONS))
-OBJCOPY_BIN := $(TARGET_CROSS)objcopy -S -O binary $(addprefix --remove-section=,$(DROP_SECTIONS))
-
-define Image/Prepare
-	cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
-	
-	# Build RAM image
-	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader \
-		$(LOADER_MAKEOPTS) \
-		clean compile
-	$(OBJCOPY_SREC) $(KDIR)/loader.elf $(KDIR)/kernel.ram.srec
-	
-	# Build Flash image
-	$(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader \
-		$(LOADER_MAKEOPTS) \
-		IMAGE_COPY=1 \
-		LOADER_ENTRY=$(FLASH_KERNEL) \
-		LOADER_TYPE=_flash \
-		clean compile
-	$(OBJCOPY_SREC) $(KDIR)/loader_flash.elf $(KDIR)/kernel.flash.srec
-	$(OBJCOPY_BIN) $(KDIR)/loader_flash.elf $(KDIR)/kernel.flash.bin
-endef
-
-define Image/Build/Initramfs
-	$(OBJCOPY_SREC) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.elf $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.srec
-endef
-
-define Image/Build
-	$(TARGET_CROSS)objcopy -O srec -I binary --adjust-vma $(FLASH_FS) $(KDIR)/root.$(1) $(KDIR)/root.$(1).srec
-	grep -v S7 $(KDIR)/root.$(1).srec > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
-	grep -v S0 $(KDIR)/kernel.flash.srec >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img
-	$(CP) $(KDIR)/kernel.flash.bin $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-vmlinux.bin
-	$(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).fs
-ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
-	$(call Image/Build/Initramfs)
-endif
-endef
-
-$(eval $(call BuildImage))
diff --git a/target/linux/au1000-2.6/patches/001-au1x00_gpio.patch b/target/linux/au1000-2.6/patches/001-au1x00_gpio.patch
deleted file mode 100644
index d4339ae..0000000
--- a/target/linux/au1000-2.6/patches/001-au1x00_gpio.patch
+++ /dev/null
@@ -1,294 +0,0 @@
-diff -urN linux-2.6.21.1/arch/mips/au1000/common/gpio.c linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c
---- linux-2.6.21.1/arch/mips/au1000/common/gpio.c	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c	2007-05-22 21:41:55.000000000 +0200
-@@ -1,4 +1,7 @@
- /*
-+ *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
-+ *  	Architecture specific GPIO support
-+ *
-  *  This program is free software; you can redistribute	 it and/or modify it
-  *  under  the terms of	 the GNU General  Public License as published by the
-  *  Free Software Foundation;  either version 2 of the	License, or (at your
-@@ -18,101 +21,133 @@
-  *  You should have received a copy of the  GNU General Public License along
-  *  with this program; if not, write  to the Free Software Foundation, Inc.,
-  *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *  Notes :
-+ * 	au1000 SoC have only one GPIO line : GPIO1
-+ * 	others have a second one : GPIO2
-  */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/types.h>
- #include <linux/module.h>
--#include <au1000.h>
--#include <au1xxx_gpio.h>
-+
-+#include <asm/addrspace.h>
-+#include <asm/io.h>
-+
-+#include <asm/mach-au1x00/au1000.h>
-+#include <asm/gpio.h>
- 
- #define gpio1 sys
- #if !defined(CONFIG_SOC_AU1000)
- static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
-+#define GPIO2_OUTPUT_ENABLE_MASK 	0x00010000
- 
--#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
--
--int au1xxx_gpio2_read(int signal)
-+static int au1xxx_gpio2_read(unsigned gpio)
- {
--	signal -= 200;
--/*	gpio2->dir &= ~(0x01 << signal);						//Set GPIO to input */
--	return ((gpio2->pinstate >> signal) & 0x01);
-+	gpio -= AU1XXX_GPIO_BASE;
-+	return ((gpio2->pinstate >> gpio) & 0x01);
- }
- 
--void au1xxx_gpio2_write(int signal, int value)
-+static void au1xxx_gpio2_write(unsigned gpio, int value)
- {
--	signal -= 200;
-+	gpio -= AU1XXX_GPIO_BASE;
- 
--	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
--		(value << signal);
-+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) |
-+	                (value << gpio);
- }
- 
--void au1xxx_gpio2_tristate(int signal)
-+static int au1xxx_gpio2_direction_input(unsigned gpio)
- {
--	signal -= 200;
--	gpio2->dir &= ~(0x01 << signal); 	/* Set GPIO to input */
-+	gpio -= AU1XXX_GPIO_BASE;
-+	gpio2->dir &= ~(0x01 << gpio);
-+	return 0;
- }
--#endif
- 
--int au1xxx_gpio1_read(int signal)
-+static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
-+{
-+	gpio -= AU1XXX_GPIO_BASE;
-+	gpio2->dir = (0x01 << gpio) | (value << gpio);
-+	return 0;
-+}
-+
-+#endif /* !defined(CONFIG_SOC_AU1000) */
-+
-+static int au1xxx_gpio1_read(unsigned gpio)
- {
--/*	gpio1->trioutclr |= (0x01 << signal); */
--	return ((gpio1->pinstaterd >> signal) & 0x01);
-+	return ((gpio1->pinstaterd >> gpio) & 0x01);
- }
- 
--void au1xxx_gpio1_write(int signal, int value)
-+static void au1xxx_gpio1_write(unsigned gpio, int value)
- {
- 	if(value)
--		gpio1->outputset = (0x01 << signal);
-+		gpio1->outputset = (0x01 << gpio);
- 	else
--		gpio1->outputclr = (0x01 << signal);	/* Output a Zero */
-+		/* Output a zero */
-+		gpio1->outputclr = (0x01 << gpio);
- }
- 
--void au1xxx_gpio1_tristate(int signal)
-+static int au1xxx_gpio1_direction_input(unsigned gpio)
- {
--	gpio1->trioutclr = (0x01 << signal);		/* Tristate signal */
-+	gpio1->pininputen = (0x01 << gpio);
-+	return 0;
- }
- 
-+static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
-+{
-+	gpio1->trioutclr = (0x01 & gpio);
-+	return 0;
-+}
- 
--int au1xxx_gpio_read(int signal)
-+int au1xxx_gpio_get_value(unsigned gpio)
- {
--	if(signal >= 200)
-+	if(gpio >= AU1XXX_GPIO_BASE)
- #if defined(CONFIG_SOC_AU1000)
- 		return 0;
- #else
--		return au1xxx_gpio2_read(signal);
-+		return au1xxx_gpio2_read(gpio);
- #endif
- 	else
--		return au1xxx_gpio1_read(signal);
-+		return au1xxx_gpio1_read(gpio);
- }
- 
--void au1xxx_gpio_write(int signal, int value)
-+void au1xxx_gpio_set_value(unsigned gpio, int value)
- {
--	if(signal >= 200)
-+	if(gpio >= AU1XXX_GPIO_BASE)
- #if defined(CONFIG_SOC_AU1000)
- 		;
- #else
--		au1xxx_gpio2_write(signal, value);
-+		au1xxx_gpio2_write(gpio, value);
- #endif
- 	else
--		au1xxx_gpio1_write(signal, value);
-+		au1xxx_gpio1_write(gpio, value);
- }
- 
--void au1xxx_gpio_tristate(int signal)
-+int au1xxx_gpio_direction_input(unsigned gpio)
- {
--	if(signal >= 200)
-+	if (gpio >= AU1XXX_GPIO_BASE)
- #if defined(CONFIG_SOC_AU1000)
- 		;
- #else
--		au1xxx_gpio2_tristate(signal);
-+		return au1xxx_gpio2_direction_input(gpio);
- #endif
- 	else
--		au1xxx_gpio1_tristate(signal);
-+		return au1xxx_gpio1_direction_input(gpio);
- }
- 
--void au1xxx_gpio1_set_inputs(void)
-+int au1xxx_gpio_direction_output(unsigned gpio, int value)
- {
--	gpio1->pininputen = 0;
-+	if (gpio >= AU1XXX_GPIO_BASE)
-+#if defined(CONFIG_SOC_AU1000)
-+		;
-+#else
-+		return au1xxx_gpio2_direction_output(gpio, value);
-+#endif
-+	else
-+		return au1xxx_gpio1_direction_output(gpio, value);
- }
- 
--EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
--EXPORT_SYMBOL(au1xxx_gpio_tristate);
--EXPORT_SYMBOL(au1xxx_gpio_write);
--EXPORT_SYMBOL(au1xxx_gpio_read);
-+EXPORT_SYMBOL(au1xxx_gpio_direction_output);
-+EXPORT_SYMBOL(au1xxx_gpio_direction_input);
-+EXPORT_SYMBOL(au1xxx_gpio_get_value);
-+EXPORT_SYMBOL(au1xxx_gpio_set_value);
---- linux-2.6.21.1/arch/mips/Kconfig	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1.new/arch/mips/Kconfig	2007-05-21 08:04:42.000000000 +0200
-@@ -1044,6 +1044,7 @@
- 	select SYS_SUPPORTS_32BIT_KERNEL
- 	select SYS_SUPPORTS_APM_EMULATION
- 	select SYS_SUPPORTS_KGDB
-+	select GENERIC_GPIO
- 
- config PNX8550
- 	bool
-diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h
---- linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h	1970-01-01 01:00:00.000000000 +0100
-@@ -1,20 +0,0 @@
--#ifndef __AU1XXX_GPIO_H
--#define __AU1XXX_GPIO_H
--
--void au1xxx_gpio1_set_inputs(void);
--void au1xxx_gpio_tristate(int signal);
--void au1xxx_gpio_write(int signal, int value);
--int  au1xxx_gpio_read(int signal);
--
--typedef volatile struct
--{
--	u32 dir;
--	u32 reserved;
--	u32 output;
--	u32 pinstate;
--	u32 inten;
--	u32 enable;
--
--} AU1X00_GPIO2;
--
--#endif //__AU1XXX_GPIO_H
-diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h
---- linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h	2007-05-21 01:10:22.000000000 +0200
-@@ -0,0 +1,69 @@
-+#ifndef _AU1XXX_GPIO_H_
-+#define _AU1XXX_GPIO_H_
-+
-+#define AU1XXX_GPIO_BASE	200
-+
-+typedef volatile struct
-+{
-+	u32 dir;
-+	u32 reserved;
-+	u32 output;
-+	u32 pinstate;
-+	u32 inten;
-+	u32 enable;
-+
-+} AU1X00_GPIO2;
-+
-+extern int au1xxx_gpio_get_value(unsigned gpio);
-+extern void au1xxx_gpio_set_value(unsigned gpio, int value);
-+extern int au1xxx_gpio_direction_input(unsigned gpio);
-+extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
-+
-+
-+/* Wrappers for the arch-neutral GPIO API */
-+
-+static inline int gpio_request(unsigned gpio, const char *label)
-+{
-+	/* Not yet implemented */
-+	return 0;
-+}
-+
-+static inline void gpio_free(unsigned gpio)
-+{
-+	/* Not yet implemented */
-+}
-+
-+static inline int gpio_direction_input(unsigned gpio)
-+{
-+	return au1xxx_gpio_direction_input(gpio);
-+}
-+
-+static inline int gpio_direction_output(unsigned gpio, int value)
-+{
-+	return au1xxx_gpio_direction_output(gpio, value);
-+}
-+
-+static inline int gpio_get_value(unsigned gpio)
-+{
-+	return au1xxx_gpio_get_value(gpio);
-+}
-+
-+static inline void gpio_set_value(unsigned gpio, int value)
-+{
-+	au1xxx_gpio_set_value(gpio, value);
-+}
-+
-+static inline int gpio_to_irq(unsigned gpio)
-+{
-+	return gpio;
-+}
-+
-+static inline int irq_to_gpio(unsigned irq)
-+{
-+	return irq;
-+}
-+
-+/* For cansleep */
-+#include <asm-generic/gpio.h>
-+
-+#endif /* _AU1XXX_GPIO_H_ */
diff --git a/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch b/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch
deleted file mode 100644
index 946bd84..0000000
--- a/target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-diff -urN linux-2.6.16.7/drivers/net/au1000_eth.c linux-2.6.16.7.new/drivers/net/au1000_eth.c
---- linux-2.6.16.7/drivers/net/au1000_eth.c	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/drivers/net/au1000_eth.c	2006-04-23 01:42:48.000000000 +0200
-@@ -12,6 +12,9 @@
-  * Author: MontaVista Software, Inc.
-  *         	ppopov@mvista.com or source@mvista.com
-  *
-+ *         Bjoern Riemer 2004
-+ *           riemer@fokus.fraunhofer.de or riemer@riemer-nt.de
-+ *             // fixed the link beat detection with ioctls (SIOCGMIIPHY)
-  * ########################################################################
-  *
-  *  This program is free software; you can distribute it and/or modify it
-@@ -1672,6 +1675,10 @@
- 	aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed);
- 	control = MAC_DISABLE_RX_OWN | MAC_RX_ENABLE | MAC_TX_ENABLE;
- #ifndef CONFIG_CPU_LITTLE_ENDIAN
-+	/*riemer: fix for startup without cable */
-+	if (!link)
-+		dev->flags &= ~IFF_RUNNING;
-+
- 	control |= MAC_BIG_ENDIAN;
- #endif
- 	if (link && (dev->if_port == IF_PORT_100BASEFX)) {
diff --git a/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch b/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch
deleted file mode 100644
index f4d380c..0000000
--- a/target/linux/au1000-2.6/patches/006-mtx1_system_button.patch
+++ /dev/null
@@ -1,241 +0,0 @@
-diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c
---- linux-2.6.16.7/arch/mips/au1000/mtx-1/irqmap.c	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/irqmap.c	2006-04-23 11:54:31.000000000 +0200
-@@ -64,6 +64,7 @@
-        { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-        { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-        { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-+       { AU1500_GPIO_207, INTC_INT_RISE_AND_FALL_EDGE, 0 },
- };
- 
- int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
-diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile
---- linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile	2006-04-17 23:53:25.000000000 +0200
-+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/Makefile	2006-04-23 14:01:36.000000000 +0200
-@@ -8,3 +8,4 @@
- #
- 
- lib-y := init.o board_setup.o irqmap.o
-+obj-y := mtx-1_sysbtn.o
-diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c
---- linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c	2006-04-23 14:01:17.000000000 +0200
-@@ -0,0 +1,218 @@
-+/*
-+ *      Driver for the MTX-1 System Button.
-+ *
-+ *      (c) Copyright 2005 4G Systems <info@4g-systems.biz>, All Rights Reserved.
-+ *                              http://www.4g-systems.biz
-+ *
-+ *      This program is free software; you can redistribute it and/or
-+ *      modify it under the terms of the GNU General Public License
-+ *      as published by the Free Software Foundation; either version
-+ *      2 of the License, or (at your option) any later version.
-+ *
-+ *      Neither Michael Stickel nor 4G Systeme GmbH admit liability nor provide
-+ *      warranty for any of this software. This material is provided
-+ *      "AS-IS" and at no charge.
-+ *
-+ *      (c) Copyright 2005    4G Systems <info@4g-systems.biz>
-+ *
-+ *      Release 0.01.
-+ *
-+ *      Author: Michael Stickel  michael.stickel@4g-systems.biz
-+ *
-+ *
-+ *      After the module is loaded there is a device /dev/misc/btn
-+ *      that can be read. It returns one char '1' if the button
-+ *      has been pressed an '0' if it has been released.
-+ */
-+#include <linux/autoconf.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/kernel.h>
-+#include <linux/poll.h>
-+#include <linux/sched.h>
-+#include <linux/miscdevice.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <asm/mach-au1x00/au1000.h>
-+
-+
-+#ifndef FALSE
-+# define FALSE (0)
-+#endif
-+
-+#ifndef TRUE
-+# define TRUE (!FALSE)
-+#endif
-+
-+
-+//---------[ declarations ]-----------------
-+
-+
-+static DECLARE_WAIT_QUEUE_HEAD(mtx1btn_wait_queue);
-+static char state_changed;
-+static char last_value;
-+static char is_inuse;
-+
-+
-+//---------[ Hardware Functions ]-----------------
-+
-+// The MTX-1 Button is attached to GPIO207.
-+#define MTX1_GPIO2_SYSBTN (7)
-+#define MTX1_SYSBTN_IRQ   (AU1500_GPIO_207)
-+
-+
-+static char mtx1_getbtn (int btnno)
-+{
-+  if (btnno==0) {
-+    return (au_readl(GPIO2_PINSTATE) & (1<<MTX1_GPIO2_SYSBTN)) ? 0 : 1;
-+  }
-+  return 0;
-+}
-+
-+static void mtx1_initbuttons (void)
-+{
-+  au_writel (au_readl(GPIO2_DIR) & ~(1<<MTX1_GPIO2_SYSBTN), GPIO2_DIR);
-+}
-+
-+
-+//---------[ Interrupt handling ]-----------------
-+
-+
-+static void mtx1_btn_interrupt (int irq, void *private)
-+{
-+	char value = mtx1_getbtn(0);
-+	if (last_value != value)
-+	{
-+		last_value = value;
-+		state_changed = 1;
-+		wake_up (&mtx1btn_wait_queue);
-+	}
-+//	kill_fasync(&async_queue, SIGIO, POLL_OUT);
-+}
-+
-+
-+static int mtx1_btn_startirq (void)
-+{
-+	if (!request_irq (MTX1_SYSBTN_IRQ, mtx1_btn_interrupt, 0 /* | SA_INTERRUPT */, "mtx1btn", (void *)&state_changed)) {
-+		return 0;
-+    }
-+	return -1;
-+}
-+
-+static int mtx1_btn_stopirq  (void)
-+{
-+	free_irq(MTX1_SYSBTN_IRQ, (void *)&state_changed);
-+	return 0;
-+}
-+
-+
-+
-+//---------[ File Functions ]-----------------
-+
-+
-+static int mtx1sysbtn_minor = -1;
-+
-+
-+static int mtx1sysbtn_open (struct inode *inode, struct file *file)
-+{
-+	if (MINOR(inode->i_rdev)!=mtx1sysbtn_minor) return -ENODEV;
-+	if (is_inuse) return -EBUSY;
-+	is_inuse=1;
-+	last_value = mtx1_getbtn(0);
-+	state_changed = 0;
-+	return 0;
-+}
-+
-+
-+static int mtx1sysbtn_release (struct inode *inode, struct file *file) {
-+	if (MINOR(inode->i_rdev)==mtx1sysbtn_minor) {
-+		is_inuse=0;
-+	}
-+	return 0;
-+}
-+
-+
-+static ssize_t mtx1sysbtn_read (struct file *file, char *buf, size_t count, loff_t *ppos)
-+{
-+	if (count < 1)
-+		return -EINVAL;
-+	if (!state_changed)
-+		interruptible_sleep_on (&mtx1btn_wait_queue);
-+	state_changed = 0;
-+	char c = last_value ? '1' : '0'; /* mtx1_getbtn(0) */
-+	if(copy_to_user(buf, &c, 1))
-+		return -EFAULT;
-+	return 1;
-+}
-+
-+
-+static unsigned int mtx1sysbtn_poll (struct file *file, poll_table * wait)
-+{
-+  unsigned int mask = 0;
-+
-+  poll_wait (file, &mtx1btn_wait_queue, wait);
-+
-+  if (state_changed) // state changed since last time.
-+    mask |= POLLIN | POLLRDNORM;
-+
-+  return mask;
-+}
-+
-+
-+static struct file_operations mtx1sysbtn_fops = {
-+	.owner = THIS_MODULE,
-+	.read = mtx1sysbtn_read,
-+	.poll = mtx1sysbtn_poll,
-+	.open = mtx1sysbtn_open,
-+	.release = mtx1sysbtn_release
-+};
-+
-+
-+static struct miscdevice mtx1sysbtn_miscdev = {
-+	MISC_DYNAMIC_MINOR /* SYSBTN_MINOR */ ,
-+	"btn",
-+	&mtx1sysbtn_fops
-+};
-+
-+
-+
-+//---------[ Module Functions ]-----------------
-+
-+
-+void __exit exit_mtx1_sysbtn (void)
-+{
-+	is_inuse = 1;
-+	mtx1_btn_stopirq ();
-+	misc_deregister(&mtx1sysbtn_miscdev);
-+}
-+
-+
-+static int __init init_mtx1_sysbtn (void)
-+{
-+	printk("MTX-1 System Button driver\n");
-+	is_inuse = 1;
-+	mtx1_initbuttons ();
-+	if (misc_register (&mtx1sysbtn_miscdev) >= 0) {
-+		mtx1sysbtn_minor = mtx1sysbtn_miscdev.minor;
-+		if (mtx1_btn_startirq () == 0) {
-+			is_inuse=0;
-+			return 0;
-+		}
-+		misc_deregister(&mtx1sysbtn_miscdev);
-+	}
-+	return 1;
-+}
-+
-+module_init(init_mtx1_sysbtn);
-+module_exit(exit_mtx1_sysbtn);
-+
-+MODULE_AUTHOR("Michael Stickel");
-+MODULE_DESCRIPTION("Driver for the MTX-1 system button");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/au1000-2.6/patches/011-mtx1_leds.patch b/target/linux/au1000-2.6/patches/011-mtx1_leds.patch
deleted file mode 100644
index 93c681e..0000000
--- a/target/linux/au1000-2.6/patches/011-mtx1_leds.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kconfig
---- linux-2.6.19.2/drivers/leds/Kconfig	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/drivers/leds/Kconfig	2007-03-02 13:50:28.000000000 +0100
-@@ -76,6 +76,13 @@
- 	  This option enables support for the Soekris net4801 and net4826 error
- 	  LED.
- 
-+config LEDS_MTX1
-+	tristate "LED Support for MTX-1 boards"
-+	depends on LEDS_CLASS && MIPS_MTX1
-+	help
-+	  This option enables support for the MTX-1 power and status LED.
-+
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
-diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile
---- linux-2.6.21.1/drivers/leds/Makefile	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1.new/drivers/leds/Makefile	2007-05-24 23:39:18.000000000 +0200
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
-+obj-$(CONFIG_LEDS_MTX1)			+= leds-mtx1.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch b/target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch
deleted file mode 100644
index 8f07842..0000000
--- a/target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- linux-2.6.19.2/arch/mips/au1000/mtx-1/init.c.old	2007-04-06 15:01:13.503777992 +0200
-+++ linux-2.6.19.2/arch/mips/au1000/mtx-1/init.c	2007-04-06 15:01:36.296313000 +0200
-@@ -39,7 +39,6 @@
- 
- int prom_argc;
- char **prom_argv, **prom_envp;
--extern void  __init prom_init_cmdline(void);
- extern char *prom_getenv(char *envname);
- 
- const char *get_system_type(void)
-@@ -59,7 +58,7 @@
- 	mips_machgroup = MACH_GROUP_ALCHEMY;
- 	mips_machtype = MACH_MTX1;	/* set the platform # */
- 
--	prom_init_cmdline();
-+	strcpy(arcs_cmdline, CONFIG_CMDLINE);
- 
- 	memsize_str = prom_getenv("memsize");
- 	if (!memsize_str)
diff --git a/target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch b/target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch
deleted file mode 100644
index 7793161..0000000
--- a/target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux-2.6.19.2/drivers/mtd/maps/mtx-1_flash.c	2007-07-10 20:56:30.000000000 +0200
-+++ linux-2.6.19.2.new/drivers/mtd/maps/mtx-1_flash.c	2007-07-23 12:21:16.000000000 +0200
-@@ -28,7 +28,7 @@
- 
- static struct mtd_partition mtx1_partitions[] = {
-         {
--                .name = "filesystem",
-+                .name = "rootfs",
-                 .size = 0x01C00000,
-                 .offset = 0,
-         },{
diff --git a/target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch b/target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch
deleted file mode 100644
index 6187a7d..0000000
--- a/target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- linux-2.6.22.1.orig/drivers/net/au1000_eth.c	2007-07-24 18:43:25.527583520 +0200
-+++ linux-2.6.22.1/drivers/net/au1000_eth.c	2007-07-24 23:07:00.388821102 +0200
-@@ -1320,9 +1320,12 @@
- 	}
- }
- 
-+#define AU1000_KNOWN_PHY_IOCTLS 		(SIOCGMIIPHY & 0xfff0)
- static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
- 	struct au1000_private *aup = (struct au1000_private *)dev->priv;
-+	if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS)
-+		return -EINVAL;
- 
- 	if (!netif_running(dev)) return -EINVAL;
- 
diff --git a/target/linux/au1000-2.6/patches/015-pci-resource.patch b/target/linux/au1000-2.6/patches/015-pci-resource.patch
deleted file mode 100644
index ddbb7ed..0000000
--- a/target/linux/au1000-2.6/patches/015-pci-resource.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- linux-2.6.22.1.orig/include/asm-mips/mach-au1x00/au1000.h	2007-07-24 18:44:21.598778839 +0200
-+++ linux-2.6.22.1/include/asm-mips/mach-au1x00/au1000.h	2007-07-24 22:08:49.761901610 +0200
-@@ -1680,9 +1680,9 @@
- #define PCI_LAST_DEVFN  (19<<3)
- 
- #define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
--#define IOPORT_RESOURCE_END   0xffffffff
-+#define IOPORT_RESOURCE_END   0xfffffffffULL
- #define IOMEM_RESOURCE_START  0x10000000
--#define IOMEM_RESOURCE_END    0xffffffff
-+#define IOMEM_RESOURCE_END    0xfffffffffULL
- 
-   /*
-    * Borrowed from the PPC arch:
diff --git a/target/linux/au1000-2.6/patches/016-pci-io_map.patch b/target/linux/au1000-2.6/patches/016-pci-io_map.patch
deleted file mode 100644
index 6a80f7c..0000000
--- a/target/linux/au1000-2.6/patches/016-pci-io_map.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- linux-2.6.22.1.orig/arch/mips/au1000/common/pci.c	2007-07-24 18:42:21.031908123 +0200
-+++ linux-2.6.22.1/arch/mips/au1000/common/pci.c	2007-07-24 22:12:07.373162835 +0200
-@@ -74,6 +74,7 @@
- 		printk(KERN_ERR "Unable to ioremap pci space\n");
- 		return 1;
- 	}
-+	au1x_controller.io_map_base = virt_io_addr;
- 
- #ifdef CONFIG_DMA_NONCOHERENT
- 	{
diff --git a/target/linux/au1000-2.6/patches/017-usb-power.patch b/target/linux/au1000-2.6/patches/017-usb-power.patch
deleted file mode 100644
index 7f7fac8..0000000
--- a/target/linux/au1000-2.6/patches/017-usb-power.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux-2.6.22.1.orig/arch/mips/au1000/mtx-1/board_setup.c	2007-07-29 18:57:35.000000000 +0200
-+++ linux-2.6.22.1/arch/mips/au1000/mtx-1/board_setup.c	2007-07-29 18:59:48.000000000 +0200
-@@ -54,7 +54,7 @@
- 
- void __init board_setup(void)
- {
--#ifdef CONFIG_USB_OHCI
-+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) 
- 	// enable USB power switch
- 	au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
- 	au_writel( 0x100000, GPIO2_OUTPUT );
diff --git a/target/linux/au1000-2.6/profiles/Atheros.mk b/target/linux/au1000-2.6/profiles/Atheros.mk
deleted file mode 100644
index ec6e175..0000000
--- a/target/linux/au1000-2.6/profiles/Atheros.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Atheros
-  NAME:=Atheros WiFi (default)
-  PACKAGES:=kmod-madwifi
-endef
-$(eval $(call Profile,Atheros))
-
diff --git a/target/linux/au1000-2.6/profiles/Broadcom.mk b/target/linux/au1000-2.6/profiles/Broadcom.mk
deleted file mode 100644
index d7fb9cb..0000000
--- a/target/linux/au1000-2.6/profiles/Broadcom.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Broadcom
-  NAME:=Broadcom BCM43xx WiFi
-  PACKAGES:=kmod-net-bcm43xx
-endef
-$(eval $(call Profile,Broadcom))
-
diff --git a/target/linux/au1000-2.6/profiles/Intel.mk b/target/linux/au1000-2.6/profiles/Intel.mk
deleted file mode 100644
index be112ee..0000000
--- a/target/linux/au1000-2.6/profiles/Intel.mk
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Intel
-  NAME:=Intel IPW2200 WiFi
-  PACKAGES:=kmod-net-ipw2200
-endef
-$(eval $(call Profile,Intel))
-