drop support for 2.6.30

SVN-Revision: 20442

6 files changed, 0 insertions, 110 deletions

diff --git a/target/linux/au1000/patches-2.6.30/001-mtx1_cmdline.patch b/target/linux/au1000/patches-2.6.30/001-mtx1_cmdline.patch
deleted file mode 100644
index a458327..0000000
--- a/target/linux/au1000/patches-2.6.30/001-mtx1_cmdline.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/alchemy/mtx-1/init.c
-+++ b/arch/mips/alchemy/mtx-1/init.c
-@@ -49,7 +49,7 @@ void __init prom_init(void)
- 	prom_argv = (char **)fw_arg1;
- 	prom_envp = (char **)fw_arg2;
- 
--	prom_init_cmdline();
-+	strcpy(arcs_cmdline, CONFIG_CMDLINE);
- 
- 	memsize_str = prom_getenv("memsize");
- 	if (!memsize_str)
diff --git a/target/linux/au1000/patches-2.6.30/002-openwrt_rootfs.patch b/target/linux/au1000/patches-2.6.30/002-openwrt_rootfs.patch
deleted file mode 100644
index e1056e9..0000000
--- a/target/linux/au1000/patches-2.6.30/002-openwrt_rootfs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/alchemy/mtx-1/platform.c
-+++ b/arch/mips/alchemy/mtx-1/platform.c
-@@ -90,7 +90,7 @@ static struct platform_device mtx1_gpio_
- 
- static struct mtd_partition mtx1_mtd_partitions[] = {
- 	{
--		.name	= "filesystem",
-+		.name	= "rootfs",
- 		.size	= 0x01C00000,
- 		.offset	= 0,
- 	},
diff --git a/target/linux/au1000/patches-2.6.30/003-au1000_eth_ioctl.patch b/target/linux/au1000/patches-2.6.30/003-au1000_eth_ioctl.patch
deleted file mode 100644
index 9bda9a3..0000000
--- a/target/linux/au1000/patches-2.6.30/003-au1000_eth_ioctl.patch
+++ /dev/null
@@ -1,17 +0,0 @@
---- a/drivers/net/au1000_eth.c
-+++ b/drivers/net/au1000_eth.c
-@@ -1036,10 +1036,14 @@ static void au1000_multicast_list(struct
- 	}
- }
- 
-+#define AU1000_KNOWN_PHY_IOCTLS	(SIOCGMIIPHY & 0xfff0)
- static int au1000_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
- 	struct au1000_private *aup = netdev_priv(dev);
- 
-+	if((cmd & AU1000_KNOWN_PHY_IOCTLS) != AU1000_KNOWN_PHY_IOCTLS)
-+		return -EINVAL;
-+
- 	if (!netif_running(dev)) return -EINVAL;
- 
- 	if (!aup->phy_dev) return -EINVAL; // PHY not controllable
diff --git a/target/linux/au1000/patches-2.6.30/004-state_led_phy_fix.patch b/target/linux/au1000/patches-2.6.30/004-state_led_phy_fix.patch
deleted file mode 100644
index cfaea00..0000000
--- a/target/linux/au1000/patches-2.6.30/004-state_led_phy_fix.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/net/au1000_eth.c
-+++ b/drivers/net/au1000_eth.c
-@@ -166,6 +166,15 @@ struct au1000_private *au_macs[NUM_ETH_I
- #  undef AU1XXX_PHY1_IRQ
- #endif
- 
-+#if defined(CONFIG_MIPS_MTX1)
-+/*
-+ * 4G MeshCube (MTX-1) board
-+ * PHY is at address 31 on MAC0
-+ * autodetect fails if not searched for highest address !
-+ */
-+# define AU1XXX_PHY_SEARCH_HIGHEST_ADDR
-+#endif
-+
- #if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0)
- # error MAC0-associated PHY attached 2nd MACs MII bus not supported yet
- #endif
-@@ -483,6 +492,12 @@ static int mii_probe (struct net_device 
- 	aup->old_duplex = -1;
- 	aup->phy_dev = phydev;
- 
-+#ifdef CONFIG_MIPS_MTX1
-+	/* set up ethernet jack LEDs on the 4G MeshCube (MTX-1 board) */
-+	printk(KERN_INFO "MTX-1 PHY: updating LED settings\n");
-+	phy_write(phydev, 0x11, 0xff80);
-+#endif
-+
- 	printk(KERN_INFO "%s: attached PHY driver [%s] "
- 	       "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
- 	       phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
diff --git a/target/linux/au1000/patches-2.6.30/006-missing_string_header.patch b/target/linux/au1000/patches-2.6.30/006-missing_string_header.patch
deleted file mode 100644
index 8aba202..0000000
--- a/target/linux/au1000/patches-2.6.30/006-missing_string_header.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/alchemy/mtx-1/init.c
-+++ b/arch/mips/alchemy/mtx-1/init.c
-@@ -32,6 +32,7 @@
- #include <linux/init.h>
- 
- #include <asm/bootinfo.h>
-+#include <asm/string.h>
- 
- #include <prom.h>
- 
diff --git a/target/linux/au1000/patches-2.6.30/007-gpio_request_button.patch b/target/linux/au1000/patches-2.6.30/007-gpio_request_button.patch
deleted file mode 100644
index c0c6a22..0000000
--- a/target/linux/au1000/patches-2.6.30/007-gpio_request_button.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/mips/alchemy/mtx-1/platform.c
-+++ b/arch/mips/alchemy/mtx-1/platform.c
-@@ -1,7 +1,7 @@
- /*
-  * MTX-1 platform devices registration
-  *
-- * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org>
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-@@ -142,7 +142,17 @@ static struct __initdata platform_device
- 
- static int __init mtx1_register_devices(void)
- {
--	gpio_direction_input(207);
-+	int rc;
-+
-+	rc = gpio_request(mtx1_gpio_button[0].gpio,
-+					mtx1_gpio_button[0].desc);
-+	if (rc < 0) {
-+		printk(KERN_INFO "mtx1: failed to request %d\n",
-+					mtx1_gpio_button[0].gpio);
-+		goto out;
-+	}
-+	gpio_direction_input(mtx1_gpio_button[0].gpio);
-+out:
- 	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
- }
-