Upgrade au1000 to 2.6.23

SVN-Revision: 9243

11 files changed, 91 insertions, 489 deletions

diff --git a/target/linux/au1000/Makefile b/target/linux/au1000/Makefile
index 278e617..3bfb64a 100644
--- a/target/linux/au1000/Makefile
+++ b/target/linux/au1000/Makefile
@@ -11,7 +11,7 @@ BOARD:=au1000
 BOARDNAME:=AMD Alchemy AU1x00
 FEATURES:=jffs2 usb pci
 
-LINUX_VERSION:=2.6.22.4
+LINUX_VERSION:=2.6.23
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += yamonenv
diff --git a/target/linux/au1000/config-2.6.22 b/target/linux/au1000/config-2.6.23
index 3ae9450..bc29045 100644
--- a/target/linux/au1000/config-2.6.22
+++ b/target/linux/au1000/config-2.6.23
@@ -4,8 +4,8 @@ CONFIG_64BIT_PHYS_ADDR=y
 # CONFIG_8139TOO is not set
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_ATM is not set
-# CONFIG_B44 is not set
 CONFIG_BASE_SMALL=0
 CONFIG_BITREVERSE=y
 # CONFIG_BROADCOM_PHY is not set
@@ -16,6 +16,7 @@ CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_LOONGSON2 is not set
 CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
@@ -41,41 +42,40 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 # CONFIG_CPU_VR41XX is not set
 CONFIG_CRAMFS=m
 CONFIG_CRC16=y
-# CONFIG_DDB5477 is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_DEVPORT=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
+# CONFIG_DS1682 is not set
 CONFIG_DUMMY=m
 CONFIG_ELF_CORE=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_HAMRADIO is not set
+CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HW_HAS_PCI=y
 CONFIG_HW_RANDOM=y
 CONFIG_HZ=250
 # CONFIG_HZ_100 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
 CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_48 is not set
 CONFIG_I2C=m
 CONFIG_I2C_ALGOBIT=m
 CONFIG_I2C_ALGOPCA=m
 CONFIG_I2C_ALGOPCF=m
-CONFIG_I2C_AU1X00GPIO=m
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_IDE is not set
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LEDS_MTX1=y
+CONFIG_LEDS_GPIO=y
 # CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_LEMOTE_FULONG is not set
 CONFIG_MACH_ALCHEMY=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
@@ -91,7 +91,6 @@ CONFIG_MIPS_AU1X00_ENET=y
 # CONFIG_MIPS_DB1200 is not set
 # CONFIG_MIPS_DB1500 is not set
 # CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_EV64120 is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_MIRAGE is not set
@@ -106,14 +105,8 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_PB1550 is not set
 # CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
-# CONFIG_MOMENCO_OCELOT_G is not set
 CONFIG_MTD=y
 # CONFIG_MTD_ABSENT is not set
 # CONFIG_MTD_ALCHEMY is not set
@@ -148,7 +141,6 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
 # CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_MTX1=y
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 # CONFIG_MTD_ONENAND is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_PHRAM is not set
@@ -159,20 +151,23 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_SLRAM is not set
-CONFIG_MTX1_WATCHDOG=y
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
+# CONFIG_NETDEV_1000 is not set
+CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_SCH_FIFO=y
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NETDEV_1000 is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_GRE=m
+# CONFIG_NO_IOPORT is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_64KB is not set
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PCIPCWATCHDOG is not set
 CONFIG_PHYLIB=y
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNPACPI is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
 # CONFIG_PPP_MPPE is not set
@@ -180,10 +175,13 @@ CONFIG_PHYLIB=y
 # CONFIG_QSEMI_PHY is not set
 CONFIG_RESOURCES_64BIT=y
 # CONFIG_RTC is not set
+# CONFIG_RTL8187 is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_SERIAL_8250_AU1X00=y
 # CONFIG_SERIAL_8250_EXTENDED is not set
 CONFIG_SERIAL_8250_NR_UARTS=4
@@ -209,7 +207,6 @@ CONFIG_SOC_AU1X00=y
 CONFIG_SOFT_WATCHDOG=m
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_STANDALONE is not set
-CONFIG_STRIP=m
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
@@ -217,24 +214,23 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_KGDB=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TMD_HERMES is not set
 # CONFIG_TC35815 is not set
+# CONFIG_TMD_HERMES is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
 CONFIG_TRAD_SIGNALS=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
 CONFIG_USB_UHCI_HCD=m
+# CONFIG_USER_NS is not set
+# CONFIG_VGASTATE is not set
 # CONFIG_VIA_RHINE is not set
 CONFIG_WDT_MTX1=y
-CONFIG_ZONE_DMA=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/au1000/files/arch/mips/au1000/mtx-1/platform.c b/target/linux/au1000/files/arch/mips/au1000/mtx-1/platform.c
index e5116f0..529595f 100644
--- a/target/linux/au1000/files/arch/mips/au1000/mtx-1/platform.c
+++ b/target/linux/au1000/files/arch/mips/au1000/mtx-1/platform.c
@@ -26,13 +26,31 @@
 
 #include <asm/gpio.h>
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
+static struct resource mtx1_wdt_res[] = {
+	[0] = {
+		.start = 15,
+		.end = 15,
+		.name = "mtx1-wdt-gpio",
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device mtx1_wdt = {
+	.name = "mtx1-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mtx1_wdt_res),
+	.resource = mtx1_wdt_res,
+};
+
 static struct gpio_led default_leds[] = {
-        { .name = "mtx1:green", .gpio = 211, .active_low = 1, },
-	{ .name = "mtx1:red", gpio = 212, .active_low = 1, },
-}
+        { .name = "mtx1:green", .gpio = 211, },
+	{ .name = "mtx1:red", .gpio = 212, },
+};
 
-static struct gpio_led_platform_data mtx1_led_data;
+static struct gpio_led_platform_data mtx1_led_data = {
+	.num_leds = ARRAY_SIZE(default_leds),
+	.leds = default_leds,
+};
 
 static struct platform_device mtx1_gpio_leds = {
         .name = "leds-gpio",
@@ -41,18 +59,16 @@ static struct platform_device mtx1_gpio_leds = {
                 .platform_data = &mtx1_led_data,
         }
 };
-#endif
+
+static struct platform_device *mtx1_devs[] = {
+	&mtx1_gpio_leds,
+	&mtx1_wdt
+};
 
 static int __init mtx1_register_devices(void)
 {
-	int res;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
-	mtx1_led_data.num_leds = ARRAY_SIZE(default_leds);
-        mtx1_led_data.leds = default_leds;
-	res = platform_device_register(&mtx1_gpio_leds);
-#endif
-	return res;
+	return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
 }
 
-arch_initall(mtx1_register_devices);
+arch_initcall(mtx1_register_devices);
 
diff --git a/target/linux/au1000/files/drivers/leds/leds-mtx1.c b/target/linux/au1000/files/drivers/leds/leds-mtx1.c
deleted file mode 100644
index 4c2ab55..0000000
--- a/target/linux/au1000/files/drivers/leds/leds-mtx1.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * LED driver for MTX-1 boards
- *
- * Copyright 2007 Florian Fainelli <florian@openwrt.org>
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-#include <asm/gpio.h>
-
-static struct platform_device *pdev;
-
-static void mtx1_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
-{
-	if (!strcmp("mtx1:green", led_cdev->name))
-		gpio_set_value(211, brightness ? 1 : 0);
-	else
-		gpio_set_value(212, brightness ? 1 : 0);
-}
-
-static struct led_classdev mtx1_green_led = {
-	.name = "mtx1:green",
-	.brightness_set = mtx1_led_set,
-};
-
-static struct led_classdev mtx1_red_led = {
-	.name = "mtx1:red",
-	.brightness_set = mtx1_led_set,
-};
-
-static int mtx1_leds_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	ret = led_classdev_register(&pdev->dev, &mtx1_green_led);
-	if (ret < 0)
-		goto out;
-
-	ret = led_classdev_register(&pdev->dev, &mtx1_red_led);
-	if (ret < 0)
-		led_classdev_unregister(&mtx1_green_led);
-
-out:
-	return ret;
-}
-
-static int mtx1_leds_remove(struct platform_device *pdev)
-{
-	led_classdev_unregister(&mtx1_green_led);
-	led_classdev_unregister(&mtx1_red_led);
-	return 0;
-}
-
-static struct platform_driver mtx1_leds_driver = {
-	.probe = mtx1_leds_probe,
-	.remove = mtx1_leds_remove,
-	.driver = {
-		.name = "mtx1-leds",
-	}
-};
-
-static int __init mtx1_leds_init(void)
-{
-	int ret;
-
-        ret = platform_driver_register(&mtx1_leds_driver);
-        if (ret < 0)
-                goto out;
-
-        pdev = platform_device_register_simple("mtx1-leds", -1, NULL, 0);
-        if (IS_ERR(pdev)) {
-                ret = PTR_ERR(pdev);
-                platform_driver_unregister(&mtx1_leds_driver);
-                goto out;
-        }
-
-out:
-        return ret;
-
-}
-		
-static void __exit mtx1_leds_exit(void)
-{
-	platform_device_unregister(pdev);
-	platform_driver_unregister(&mtx1_leds_driver);
-}
-
-module_init(mtx1_leds_init);
-module_exit(mtx1_leds_exit);
-		
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("MTX-1 LED driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/au1000/patches/001-au1000_gpio_kconfig.patch b/target/linux/au1000/patches/001-au1000_gpio_kconfig.patch
new file mode 100644
index 0000000..1e0ddef
--- /dev/null
+++ b/target/linux/au1000/patches/001-au1000_gpio_kconfig.patch
@@ -0,0 +1,24 @@
+From 8dea23a2b6dae52267b3a969e715d3f0753acf47 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian.fainelli@telecomint.eu>
+Date: Wed, 10 Oct 2007 14:54:11 +0200
+Subject: [PATCH] [PATCH] Add missing generic GPIO support for au1000
+With the generic GPIO support for au1000, we do not
+select it in the kernel configuration.
+
+Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
+---
+ arch/mips/au1000/Kconfig |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
+index 29c95d9..f03b2eb 100644
+--- a/arch/mips/au1000/Kconfig
++++ b/arch/mips/au1000/Kconfig
+@@ -141,3 +141,4 @@ config SOC_AU1X00
+ 	select SYS_SUPPORTS_32BIT_KERNEL
+ 	select SYS_SUPPORTS_APM_EMULATION
+ 	select SYS_SUPPORTS_KGDB
++	select GENERIC_GPIO
+-- 
+1.5.2.4
+
diff --git a/target/linux/au1000/patches/001-au1x00_gpio.patch b/target/linux/au1000/patches/001-au1x00_gpio.patch
deleted file mode 100644
index d4339ae..0000000
--- a/target/linux/au1000/patches/001-au1x00_gpio.patch
+++ /dev/null
@@ -1,294 +0,0 @@
-diff -urN linux-2.6.21.1/arch/mips/au1000/common/gpio.c linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c
---- linux-2.6.21.1/arch/mips/au1000/common/gpio.c	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1.new/arch/mips/au1000/common/gpio.c	2007-05-22 21:41:55.000000000 +0200
-@@ -1,4 +1,7 @@
- /*
-+ *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
-+ *  	Architecture specific GPIO support
-+ *
-  *  This program is free software; you can redistribute	 it and/or modify it
-  *  under  the terms of	 the GNU General  Public License as published by the
-  *  Free Software Foundation;  either version 2 of the	License, or (at your
-@@ -18,101 +21,133 @@
-  *  You should have received a copy of the  GNU General Public License along
-  *  with this program; if not, write  to the Free Software Foundation, Inc.,
-  *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ *
-+ *  Notes :
-+ * 	au1000 SoC have only one GPIO line : GPIO1
-+ * 	others have a second one : GPIO2
-  */
-+
-+#include <linux/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/types.h>
- #include <linux/module.h>
--#include <au1000.h>
--#include <au1xxx_gpio.h>
-+
-+#include <asm/addrspace.h>
-+#include <asm/io.h>
-+
-+#include <asm/mach-au1x00/au1000.h>
-+#include <asm/gpio.h>
- 
- #define gpio1 sys
- #if !defined(CONFIG_SOC_AU1000)
- static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
-+#define GPIO2_OUTPUT_ENABLE_MASK 	0x00010000
- 
--#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
--
--int au1xxx_gpio2_read(int signal)
-+static int au1xxx_gpio2_read(unsigned gpio)
- {
--	signal -= 200;
--/*	gpio2->dir &= ~(0x01 << signal);						//Set GPIO to input */
--	return ((gpio2->pinstate >> signal) & 0x01);
-+	gpio -= AU1XXX_GPIO_BASE;
-+	return ((gpio2->pinstate >> gpio) & 0x01);
- }
- 
--void au1xxx_gpio2_write(int signal, int value)
-+static void au1xxx_gpio2_write(unsigned gpio, int value)
- {
--	signal -= 200;
-+	gpio -= AU1XXX_GPIO_BASE;
- 
--	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
--		(value << signal);
-+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) |
-+	                (value << gpio);
- }
- 
--void au1xxx_gpio2_tristate(int signal)
-+static int au1xxx_gpio2_direction_input(unsigned gpio)
- {
--	signal -= 200;
--	gpio2->dir &= ~(0x01 << signal); 	/* Set GPIO to input */
-+	gpio -= AU1XXX_GPIO_BASE;
-+	gpio2->dir &= ~(0x01 << gpio);
-+	return 0;
- }
--#endif
- 
--int au1xxx_gpio1_read(int signal)
-+static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
-+{
-+	gpio -= AU1XXX_GPIO_BASE;
-+	gpio2->dir = (0x01 << gpio) | (value << gpio);
-+	return 0;
-+}
-+
-+#endif /* !defined(CONFIG_SOC_AU1000) */
-+
-+static int au1xxx_gpio1_read(unsigned gpio)
- {
--/*	gpio1->trioutclr |= (0x01 << signal); */
--	return ((gpio1->pinstaterd >> signal) & 0x01);
-+	return ((gpio1->pinstaterd >> gpio) & 0x01);
- }
- 
--void au1xxx_gpio1_write(int signal, int value)
-+static void au1xxx_gpio1_write(unsigned gpio, int value)
- {
- 	if(value)
--		gpio1->outputset = (0x01 << signal);
-+		gpio1->outputset = (0x01 << gpio);
- 	else
--		gpio1->outputclr = (0x01 << signal);	/* Output a Zero */
-+		/* Output a zero */
-+		gpio1->outputclr = (0x01 << gpio);
- }
- 
--void au1xxx_gpio1_tristate(int signal)
-+static int au1xxx_gpio1_direction_input(unsigned gpio)
- {
--	gpio1->trioutclr = (0x01 << signal);		/* Tristate signal */
-+	gpio1->pininputen = (0x01 << gpio);
-+	return 0;
- }
- 
-+static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
-+{
-+	gpio1->trioutclr = (0x01 & gpio);
-+	return 0;
-+}
- 
--int au1xxx_gpio_read(int signal)
-+int au1xxx_gpio_get_value(unsigned gpio)
- {
--	if(signal >= 200)
-+	if(gpio >= AU1XXX_GPIO_BASE)
- #if defined(CONFIG_SOC_AU1000)
- 		return 0;
- #else
--		return au1xxx_gpio2_read(signal);
-+		return au1xxx_gpio2_read(gpio);
- #endif
- 	else
--		return au1xxx_gpio1_read(signal);
-+		return au1xxx_gpio1_read(gpio);
- }
- 
--void au1xxx_gpio_write(int signal, int value)
-+void au1xxx_gpio_set_value(unsigned gpio, int value)
- {
--	if(signal >= 200)
-+	if(gpio >= AU1XXX_GPIO_BASE)
- #if defined(CONFIG_SOC_AU1000)
- 		;
- #else
--		au1xxx_gpio2_write(signal, value);
-+		au1xxx_gpio2_write(gpio, value);
- #endif
- 	else
--		au1xxx_gpio1_write(signal, value);
-+		au1xxx_gpio1_write(gpio, value);
- }
- 
--void au1xxx_gpio_tristate(int signal)
-+int au1xxx_gpio_direction_input(unsigned gpio)
- {
--	if(signal >= 200)
-+	if (gpio >= AU1XXX_GPIO_BASE)
- #if defined(CONFIG_SOC_AU1000)
- 		;
- #else
--		au1xxx_gpio2_tristate(signal);
-+		return au1xxx_gpio2_direction_input(gpio);
- #endif
- 	else
--		au1xxx_gpio1_tristate(signal);
-+		return au1xxx_gpio1_direction_input(gpio);
- }
- 
--void au1xxx_gpio1_set_inputs(void)
-+int au1xxx_gpio_direction_output(unsigned gpio, int value)
- {
--	gpio1->pininputen = 0;
-+	if (gpio >= AU1XXX_GPIO_BASE)
-+#if defined(CONFIG_SOC_AU1000)
-+		;
-+#else
-+		return au1xxx_gpio2_direction_output(gpio, value);
-+#endif
-+	else
-+		return au1xxx_gpio1_direction_output(gpio, value);
- }
- 
--EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
--EXPORT_SYMBOL(au1xxx_gpio_tristate);
--EXPORT_SYMBOL(au1xxx_gpio_write);
--EXPORT_SYMBOL(au1xxx_gpio_read);
-+EXPORT_SYMBOL(au1xxx_gpio_direction_output);
-+EXPORT_SYMBOL(au1xxx_gpio_direction_input);
-+EXPORT_SYMBOL(au1xxx_gpio_get_value);
-+EXPORT_SYMBOL(au1xxx_gpio_set_value);
---- linux-2.6.21.1/arch/mips/Kconfig	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1.new/arch/mips/Kconfig	2007-05-21 08:04:42.000000000 +0200
-@@ -1044,6 +1044,7 @@
- 	select SYS_SUPPORTS_32BIT_KERNEL
- 	select SYS_SUPPORTS_APM_EMULATION
- 	select SYS_SUPPORTS_KGDB
-+	select GENERIC_GPIO
- 
- config PNX8550
- 	bool
-diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h
---- linux-2.6.21.1/include/asm-mips/mach-au1x00/au1xxx_gpio.h	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/au1xxx_gpio.h	1970-01-01 01:00:00.000000000 +0100
-@@ -1,20 +0,0 @@
--#ifndef __AU1XXX_GPIO_H
--#define __AU1XXX_GPIO_H
--
--void au1xxx_gpio1_set_inputs(void);
--void au1xxx_gpio_tristate(int signal);
--void au1xxx_gpio_write(int signal, int value);
--int  au1xxx_gpio_read(int signal);
--
--typedef volatile struct
--{
--	u32 dir;
--	u32 reserved;
--	u32 output;
--	u32 pinstate;
--	u32 inten;
--	u32 enable;
--
--} AU1X00_GPIO2;
--
--#endif //__AU1XXX_GPIO_H
-diff -urN linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h
---- linux-2.6.21.1/include/asm-mips/mach-au1x00/gpio.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.21.1.new/include/asm-mips/mach-au1x00/gpio.h	2007-05-21 01:10:22.000000000 +0200
-@@ -0,0 +1,69 @@
-+#ifndef _AU1XXX_GPIO_H_
-+#define _AU1XXX_GPIO_H_
-+
-+#define AU1XXX_GPIO_BASE	200
-+
-+typedef volatile struct
-+{
-+	u32 dir;
-+	u32 reserved;
-+	u32 output;
-+	u32 pinstate;
-+	u32 inten;
-+	u32 enable;
-+
-+} AU1X00_GPIO2;
-+
-+extern int au1xxx_gpio_get_value(unsigned gpio);
-+extern void au1xxx_gpio_set_value(unsigned gpio, int value);
-+extern int au1xxx_gpio_direction_input(unsigned gpio);
-+extern int au1xxx_gpio_direction_output(unsigned gpio, int value);
-+
-+
-+/* Wrappers for the arch-neutral GPIO API */
-+
-+static inline int gpio_request(unsigned gpio, const char *label)
-+{
-+	/* Not yet implemented */
-+	return 0;
-+}
-+
-+static inline void gpio_free(unsigned gpio)
-+{
-+	/* Not yet implemented */
-+}
-+
-+static inline int gpio_direction_input(unsigned gpio)
-+{
-+	return au1xxx_gpio_direction_input(gpio);
-+}
-+
-+static inline int gpio_direction_output(unsigned gpio, int value)
-+{
-+	return au1xxx_gpio_direction_output(gpio, value);
-+}
-+
-+static inline int gpio_get_value(unsigned gpio)
-+{
-+	return au1xxx_gpio_get_value(gpio);
-+}
-+
-+static inline void gpio_set_value(unsigned gpio, int value)
-+{
-+	au1xxx_gpio_set_value(gpio, value);
-+}
-+
-+static inline int gpio_to_irq(unsigned gpio)
-+{
-+	return gpio;
-+}
-+
-+static inline int irq_to_gpio(unsigned irq)
-+{
-+	return irq;
-+}
-+
-+/* For cansleep */
-+#include <asm-generic/gpio.h>
-+
-+#endif /* _AU1XXX_GPIO_H_ */
diff --git a/target/linux/au1000/patches/002-platform_devices.patch b/target/linux/au1000/patches/002-platform_devices.patch
new file mode 100644
index 0000000..193b500
--- /dev/null
+++ b/target/linux/au1000/patches/002-platform_devices.patch
@@ -0,0 +1,10 @@
+diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile
+index 764bf9f..4d1b8d2 100644
+--- a/arch/mips/au1000/mtx-1/Makefile
++++ b/arch/mips/au1000/mtx-1/Makefile
+@@ -7,4 +7,4 @@
+ # Makefile for 4G Systems MTX-1 board.
+ #
+
+-lib-y := init.o board_setup.o irqmap.o
++lib-y := init.o board_setup.o irqmap.o platform.o
diff --git a/target/linux/au1000/patches/006-mtx1_system_button.patch b/target/linux/au1000/patches/006-mtx1_system_button.patch
index f4d380c..4364a54 100644
--- a/target/linux/au1000/patches/006-mtx1_system_button.patch
+++ b/target/linux/au1000/patches/006-mtx1_system_button.patch
@@ -15,7 +15,7 @@ diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/Makefile linux-2.6.16.7.new/arch
 @@ -8,3 +8,4 @@
  #
  
- lib-y := init.o board_setup.o irqmap.o
+ lib-y := init.o board_setup.o irqmap.o platform.o
 +obj-y := mtx-1_sysbtn.o
 diff -urN linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c linux-2.6.16.7.new/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c
 --- linux-2.6.16.7/arch/mips/au1000/mtx-1/mtx-1_sysbtn.c	1970-01-01 01:00:00.000000000 +0100
diff --git a/target/linux/au1000/patches/011-mtx1_leds.patch b/target/linux/au1000/patches/011-mtx1_leds.patch
deleted file mode 100644
index 93c681e..0000000
--- a/target/linux/au1000/patches/011-mtx1_leds.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kconfig
---- linux-2.6.19.2/drivers/leds/Kconfig	2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.new/drivers/leds/Kconfig	2007-03-02 13:50:28.000000000 +0100
-@@ -76,6 +76,13 @@
- 	  This option enables support for the Soekris net4801 and net4826 error
- 	  LED.
- 
-+config LEDS_MTX1
-+	tristate "LED Support for MTX-1 boards"
-+	depends on LEDS_CLASS && MIPS_MTX1
-+	help
-+	  This option enables support for the MTX-1 power and status LED.
-+
-+
- comment "LED Triggers"
- 
- config LEDS_TRIGGERS
-diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile
---- linux-2.6.21.1/drivers/leds/Makefile	2007-04-27 23:49:26.000000000 +0200
-+++ linux-2.6.21.1.new/drivers/leds/Makefile	2007-05-24 23:39:18.000000000 +0200
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
- obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
- obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
-+obj-$(CONFIG_LEDS_MTX1)			+= leds-mtx1.o
- 
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
diff --git a/target/linux/au1000/patches/016-pci-io_map.patch b/target/linux/au1000/patches/016-pci-io_map.patch
deleted file mode 100644
index 6a80f7c..0000000
--- a/target/linux/au1000/patches/016-pci-io_map.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- linux-2.6.22.1.orig/arch/mips/au1000/common/pci.c	2007-07-24 18:42:21.031908123 +0200
-+++ linux-2.6.22.1/arch/mips/au1000/common/pci.c	2007-07-24 22:12:07.373162835 +0200
-@@ -74,6 +74,7 @@
- 		printk(KERN_ERR "Unable to ioremap pci space\n");
- 		return 1;
- 	}
-+	au1x_controller.io_map_base = virt_io_addr;
- 
- #ifdef CONFIG_DMA_NONCOHERENT
- 	{
diff --git a/target/linux/au1000/patches/017-usb-power.patch b/target/linux/au1000/patches/017-usb-power.patch
deleted file mode 100644
index 7f7fac8..0000000
--- a/target/linux/au1000/patches/017-usb-power.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- linux-2.6.22.1.orig/arch/mips/au1000/mtx-1/board_setup.c	2007-07-29 18:57:35.000000000 +0200
-+++ linux-2.6.22.1/arch/mips/au1000/mtx-1/board_setup.c	2007-07-29 18:59:48.000000000 +0200
-@@ -54,7 +54,7 @@
- 
- void __init board_setup(void)
- {
--#ifdef CONFIG_USB_OHCI
-+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) 
- 	// enable USB power switch
- 	au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
- 	au_writel( 0x100000, GPIO2_OUTPUT );