bcm53xx: update bcma device tree intergeneration and fix nvram parsing

This fixes lots of sparse and checkpatch errors and extends the
documentation.

This also fixes a problem in the nvram parser, it now detects the
correct nvram on my Netgear R6250.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42272

1 files changed, 93 insertions, 49 deletions

diff --git a/target/linux/bcm53xx/patches-3.14/111-bcm47xx-nvram-add-new-nvram-driver-with-dt-support.patch b/target/linux/bcm53xx/patches-3.14/111-bcm47xx-nvram-add-new-nvram-driver-with-dt-support.patch
index a53e86d..78997ed 100644
--- a/target/linux/bcm53xx/patches-3.14/111-bcm47xx-nvram-add-new-nvram-driver-with-dt-support.patch
+++ b/target/linux/bcm53xx/patches-3.14/111-bcm47xx-nvram-add-new-nvram-driver-with-dt-support.patch
@@ -1,30 +1,64 @@
-From 60a413ed5bc7917f1612df441240f458163b10c1 Mon Sep 17 00:00:00 2001
+From 71a6bff8656a1713615ffdd9139a83d65ba46c6d Mon Sep 17 00:00:00 2001
 From: Hauke Mehrtens <hauke@hauke-m.de>
 Date: Sat, 3 May 2014 22:54:59 +0200
-Subject: [PATCH 03/15] bcm47xx-nvram: add new nvram driver with dt support
+Subject: [PATCH 02/17] bcm47xx-nvram: add new broadcom nvram driver with dt
+ support
 
-This adds a new nvrm driver which uses device tree to provide nvram
-access to other drivers. You have to specify the memory ranges where
-the flash chip is mapped and this driver will search there for some
-nvram and parse it. Other drivers can use this driver to access the
+This adds a new driver which searches at a given memory range for a
+nvram like it is used on the bcm47xx and bcm53xx SoCs with ARM and MIPS
+CPUs. This driver provides acces to this nvram to other device in the
+device tree. You have to specify the memory ranges where the content of
+the flash chip is memory mapped and this driver will search there for
+some nvram and parse it. Other drivers can use this driver to access the
 device nvram. The nvram is used to store board configurations like the
-mac address and also for configuration values in the vendor firmware.
+mac addresses, the switch configuration and the calibration data for
+the wifi devices.
+
+This was copied from arch/mips/bcm47xx/nvram.c and modified to interact
+with device tree. My plan is to make the MIPS bcm47xx also use this new
+driver some time later.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 ---
- arch/mips/bcm47xx/board.c             |  36 +++---
- arch/mips/bcm47xx/nvram.c             |   7 +-
- arch/mips/bcm47xx/setup.c             |   4 +-
- arch/mips/bcm47xx/sprom.c             |   4 +-
- arch/mips/bcm47xx/time.c              |   2 +-
- drivers/misc/Kconfig                  |   5 +
- drivers/misc/Makefile                 |   1 +
- drivers/misc/bcm47xx-nvram.c          | 211 ++++++++++++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/b44.c   |   2 +-
- drivers/net/ethernet/broadcom/bgmac.c |   4 +-
- drivers/ssb/driver_chipcommon_pmu.c   |   2 +-
- include/linux/bcm47xx_nvram.h         |  16 ++-
- 12 files changed, 259 insertions(+), 35 deletions(-)
+ .../devicetree/bindings/misc/bcm47xx-nvram.txt     |  19 ++
+ arch/mips/bcm47xx/board.c                          |  40 ++--
+ arch/mips/bcm47xx/nvram.c                          |   7 +-
+ arch/mips/bcm47xx/setup.c                          |   4 +-
+ arch/mips/bcm47xx/sprom.c                          |   4 +-
+ arch/mips/bcm47xx/time.c                           |   2 +-
+ drivers/misc/Kconfig                               |   5 +
+ drivers/misc/Makefile                              |   1 +
+ drivers/misc/bcm47xx-nvram.c                       | 215 +++++++++++++++++++++
+ drivers/net/ethernet/broadcom/b44.c                |   2 +-
+ drivers/net/ethernet/broadcom/bgmac.c              |   5 +-
+ drivers/ssb/driver_chipcommon_pmu.c                |   3 +-
+ include/linux/bcm47xx_nvram.h                      |  17 +-
+ 13 files changed, 286 insertions(+), 38 deletions(-)
+ create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-nvram.txt
  create mode 100644 drivers/misc/bcm47xx-nvram.c
 
+--- /dev/null
++++ b/Documentation/devicetree/bindings/misc/bcm47xx-nvram.txt
+@@ -0,0 +1,19 @@
++Broadcom bcm47xx/bcm53xx nvram access driver
++
++This driver provides access to the nvram for other drivers.
++
++Required properties:
++
++- compatible : brcm,bcm47xx-nvram
++
++- reg : iomem address range
++
++On NorthStar ARM SoCs the NAND flash is available at 0x1c000000 and the
++NOR flash is at 0x1e000000
++
++Example:
++
++nvram0: nvram@0 {
++	compatible = "brcm,bcm47xx-nvram";
++	reg = <0x1c000000 0x01000000>;
++};
 --- a/arch/mips/bcm47xx/board.c
 +++ b/arch/mips/bcm47xx/board.c
 @@ -196,50 +196,50 @@ static __init const struct bcm47xx_board
@@ -226,7 +260,7 @@ mac address and also for configuration values in the vendor firmware.
 +obj-$(CONFIG_BCM47XX_NVRAM)	+= bcm47xx-nvram.o
 --- /dev/null
 +++ b/drivers/misc/bcm47xx-nvram.c
-@@ -0,0 +1,211 @@
+@@ -0,0 +1,215 @@
 +/*
 + * BCM947xx nvram variable access
 + *
@@ -259,12 +293,12 @@ mac address and also for configuration values in the vendor firmware.
 +
 +static u32 find_nvram_size(void __iomem *end)
 +{
-+	struct nvram_header *header;
++	struct nvram_header __iomem *header;
 +	int i;
 +
 +	for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
-+		header = (struct nvram_header *)(end - nvram_sizes[i]);
-+		if (header->magic == NVRAM_HEADER)
++		header = (struct nvram_header __iomem *)(end - nvram_sizes[i]);
++		if (__raw_readl(&header->magic) == NVRAM_HEADER)
 +			return nvram_sizes[i];
 +	}
 +
@@ -276,10 +310,11 @@ mac address and also for configuration values in the vendor firmware.
 +			       size_t len, char **nvram_buf,
 +			       size_t *nvram_len)
 +{
-+	struct nvram_header *header;
++	struct nvram_header __iomem *header;
 +	int i;
 +	u32 off;
-+	u32 *src, *dst;
++	u32 *dst;
++	__le32 __iomem *src;
 +	u32 size;
 +
 +	/* TODO: when nvram is on nand flash check for bad blocks first. */
@@ -288,21 +323,22 @@ mac address and also for configuration values in the vendor firmware.
 +		/* Windowed flash access */
 +		size = find_nvram_size(base + off);
 +		if (size) {
-+			header = (struct nvram_header *)(base + off - size);
++			header = (struct nvram_header __iomem *)
++					(base + off - size);
 +			goto found;
 +		}
-+		off <<= 1;
++		off += 0x10000;
 +	}
 +
 +	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
-+	header = (struct nvram_header *)(base + 4096);
-+	if (header->magic == NVRAM_HEADER) {
++	header = (struct nvram_header __iomem *)(base + 4096);
++	if (__raw_readl(&header->magic) == NVRAM_HEADER) {
 +		size = NVRAM_SPACE;
 +		goto found;
 +	}
 +
-+	header = (struct nvram_header *)(base + 1024);
-+	if (header->magic == NVRAM_HEADER) {
++	header = (struct nvram_header __iomem *)(base + 1024);
++	if (__raw_readl(&header->magic) == NVRAM_HEADER) {
 +		size = NVRAM_SPACE;
 +		goto found;
 +	}
@@ -313,25 +349,26 @@ mac address and also for configuration values in the vendor firmware.
 +	return -ENXIO;
 +
 +found:
-+	if (header->len > size)
++	if (readl(&header->len) > size)
 +		pr_err("The nvram size accoridng to the header seems to be bigger than the partition on flash\n");
-+	*nvram_len = min_t(u32, header->len, size);
++	*nvram_len = min_t(u32, readl(&header->len), size);
 +
 +	*nvram_buf = devm_kzalloc(dev, *nvram_len, GFP_KERNEL);
 +	if (!*nvram_buf)
 +		return -ENOMEM;
 +
-+	src = (u32 *) header;
++	src = (__le32 __iomem *) header;
 +	dst = (u32 *) *nvram_buf;
 +	for (i = 0; i < sizeof(struct nvram_header); i += 4)
-+		*dst++ = *src++;
++		*dst++ = __raw_readl(src++);
 +	for (; i < *nvram_len; i += 4)
-+		*dst++ = le32_to_cpu(*src++);
++		*dst++ = readl(src++);
 +
 +	return 0;
 +}
 +
-+int bcm47xx_nvram_getenv(const struct device *dev, const char *name, char *val, size_t val_len)
++int bcm47xx_nvram_getenv(const struct device *dev, const char *name, char *val,
++			 size_t val_len)
 +{
 +	char *var, *value, *end, *eq;
 +	struct bcm47xx_nvram *nvram;
@@ -407,7 +444,8 @@ mac address and also for configuration values in the vendor firmware.
 +	if (!mmio)
 +		return -ENOMEM;
 +
-+	err = nvram_find_and_copy(dev, mmio, resource_size(&flash_mem), &nvram->nvram_buf, &nvram->nvram_len);
++	err = nvram_find_and_copy(dev, mmio, resource_size(&flash_mem),
++				  &nvram->nvram_buf, &nvram->nvram_len);
 +	if (err)
 +		goto err_unmap_mmio;
 +
@@ -451,16 +489,17 @@ mac address and also for configuration values in the vendor firmware.
  		err = __b44_readphy(bp, 0, MII_BMCR, &val);
 --- a/drivers/net/ethernet/broadcom/bgmac.c
 +++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -974,7 +974,7 @@ static void bgmac_chip_reset(struct bgma
+@@ -974,7 +974,8 @@ static void bgmac_chip_reset(struct bgma
  			     BGMAC_CHIPCTL_1_IF_TYPE_MII;
  		char buf[4];
  
 -		if (bcm47xx_nvram_getenv("et_swtype", buf, sizeof(buf)) > 0) {
-+		if (bcm47xx_nvram_getenv(NULL, "et_swtype", buf, sizeof(buf)) > 0) {
++		if (bcm47xx_nvram_getenv(NULL, "et_swtype", buf,
++					 sizeof(buf)) > 0) {
  			if (kstrtou8(buf, 0, &et_swtype))
  				bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n",
  					  buf);
-@@ -1534,7 +1534,7 @@ static int bgmac_probe(struct bcma_devic
+@@ -1534,7 +1535,7 @@ static int bgmac_probe(struct bcma_devic
  	}
  
  	bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
@@ -471,18 +510,19 @@ mac address and also for configuration values in the vendor firmware.
  	/* TODO: reset the external phy. Specs are needed */
 --- a/drivers/ssb/driver_chipcommon_pmu.c
 +++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -319,7 +319,7 @@ static void ssb_pmu_pll_init(struct ssb_
+@@ -319,7 +319,8 @@ static void ssb_pmu_pll_init(struct ssb_
  
  	if (bus->bustype == SSB_BUSTYPE_SSB) {
  		char buf[20];
 -		if (bcm47xx_nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
-+		if (bcm47xx_nvram_getenv(NULL, "xtalfreq", buf, sizeof(buf)) >= 0)
++		if (bcm47xx_nvram_getenv(NULL, "xtalfreq", buf,
++					 sizeof(buf)) >= 0)
  			crystalfreq = simple_strtoul(buf, NULL, 0);
  	}
  
 --- a/include/linux/bcm47xx_nvram.h
 +++ b/include/linux/bcm47xx_nvram.h
-@@ -15,6 +15,8 @@
+@@ -15,9 +15,11 @@
  #include <linux/types.h>
  #include <linux/kernel.h>
  
@@ -490,8 +530,12 @@ mac address and also for configuration values in the vendor firmware.
 +
  struct nvram_header {
  	u32 magic;
- 	u32 len;
-@@ -33,17 +35,21 @@ struct nvram_header {
+-	u32 len;
++	__le32 len;
+ 	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+ 	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+ 	u32 config_ncdl;	/* ncdl values for memc */
+@@ -33,18 +35,21 @@ struct nvram_header {
  #define NVRAM_MAX_VALUE_LEN 255
  #define NVRAM_MAX_PARAM_LEN 64
  
@@ -504,10 +548,10 @@ mac address and also for configuration values in the vendor firmware.
 -int bcm47xx_nvram_gpio_pin(const char *name);
 +int bcm47xx_nvram_gpio_pin(const struct device *dev, const char *name);
  #else
--static inline int bcm47xx_nvram_getenv(const char *name, char *val, size_t val_len)
+-static inline int bcm47xx_nvram_getenv(const char *name, char *val,
 +static inline int bcm47xx_nvram_getenv(const struct device *dev,
 +				       const char *name, char *val,
-+				       size_t val_len)
+ 				       size_t val_len)
  {
  	return -ENXIO;
  }