bcm53xx: remove linux 3.14 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44946

1 files changed, 0 insertions, 69 deletions

diff --git a/target/linux/bcm53xx/patches-3.14/112-bcm53xx-sprom-add-sprom-driver.patch b/target/linux/bcm53xx/patches-3.14/112-bcm53xx-sprom-add-sprom-driver.patch
deleted file mode 100644
index e316a66..0000000
--- a/target/linux/bcm53xx/patches-3.14/112-bcm53xx-sprom-add-sprom-driver.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 4e0ab3269a6d260a41a3673157753147f5f71341 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 4 May 2014 13:19:20 +0200
-Subject: [PATCH 03/17] bcm47xx-sprom: add Broadcom sprom parser driver
-
-This driver needs an nvram driver and fetches the sprom values from the
-nvram and provides it to any other driver. The calibration data for the
-wifi chip the mac address and some more board description data is
-stores in the sprom.
-
-This is based on a copy of arch/mips/bcm47xx/sprom.c and my plan is to
-make the bcm47xx MIPS SoCs also use this driver some time later.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- .../devicetree/bindings/misc/bcm47xx-sprom.txt     |  16 +
- drivers/misc/Kconfig                               |  11 +
- drivers/misc/Makefile                              |   1 +
- drivers/misc/bcm47xx-sprom.c                       | 690 +++++++++++++++++++++
- 4 files changed, 718 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
- create mode 100644 drivers/misc/bcm47xx-sprom.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
-@@ -0,0 +1,16 @@
-+Broadcom bcm47xx/bcm53xx sprom converter
-+
-+This driver provbides an sprom based on a given nvram.
-+
-+Required properties:
-+
-+- compatible : brcm,bcm47xx-sprom
-+
-+- nvram : reference to a nvram driver, e.g. bcm47xx-nvram
-+
-+Example:
-+
-+sprom0: sprom@0 {
-+	compatible = "brcm,bcm47xx-sprom";
-+	nvram = <&nvram0>;
-+};
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -515,6 +515,17 @@ config SRAM
- 	  the genalloc API. It is supposed to be used for small on-chip SRAM
- 	  areas found on many SoCs.
- 
-+config BCM47XX_SPROM
-+	tristate "BCM47XX sprom driver"
-+	help
-+	  This driver parses the sprom from a given nvram which is found on
-+	  Broadcom bcm47xx and bcm53xx SoCs.
-+
-+	  The sprom contains board configuration data like the
-+	  calibration data fro the wifi chips, the mac addresses used
-+	  by the board and many other board configuration data. This
-+	  driver will provide the sprom to bcma.
-+
- source "drivers/misc/c2port/Kconfig"
- source "drivers/misc/eeprom/Kconfig"
- source "drivers/misc/cb710/Kconfig"
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -54,3 +54,4 @@ obj-$(CONFIG_LATTICE_ECP3_CONFIG)	+= lat
- obj-$(CONFIG_SRAM)		+= sram.o
- obj-y				+= mic/
- obj-$(CONFIG_GENWQE)		+= genwqe/
-+obj-$(CONFIG_BCM47XX_SPROM)	+= bcm47xx-sprom.o