bcm53xx: backport upstream DTS files for Linksys devices

We dont't build officialy images for them yet due to partitioning
issues.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

1 files changed, 73 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/patches-4.4/046-0011-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch b/target/linux/bcm53xx/patches-4.4/046-0011-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch
new file mode 100644
index 0000000..93bf80c
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/046-0011-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch
@@ -0,0 +1,73 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217
+wireless chipsets. LEDs will be hopefully added later to the DT.
+According to some sources it may use the same board as EA6400 and just
+differ by an original vendor firmware.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/dts/Makefile                      |  1 +
+ arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 41 +++++++++++++++++++++++++
+ 2 files changed, 42 insertions(+)
+ create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ 	bcm4708-asus-rt-ac56u.dtb \
+ 	bcm4708-asus-rt-ac68u.dtb \
+ 	bcm4708-buffalo-wzr-1750dhp.dtb \
++	bcm4708-linksys-ea6300-v1.dtb \
+ 	bcm4708-luxul-xap-1510.dtb \
+ 	bcm4708-luxul-xwc-1000.dtb \
+ 	bcm4708-netgear-r6250.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+@@ -0,0 +1,41 @@
++/*
++ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
++ *
++ * Licensed under the ISC license.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++	compatible = "linksys,ea6300-v1", "brcm,bcm4708";
++	model = "Linksys EA6300 V1";
++
++	chosen {
++		bootargs = "console=ttyS0,115200";
++	};
++
++	memory {
++		reg = <0x00000000 0x08000000>;
++	};
++
++	gpio-keys {
++		compatible = "gpio-keys";
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		wps {
++			label = "WPS";
++			linux,code = <KEY_WPS_BUTTON>;
++			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++		};
++
++		restart {
++			label = "Reset";
++			linux,code = <KEY_RESTART>;
++			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++		};
++	};
++};