bcm53xx: use the latest XHCI doorbell patch sent for upstream

The main difference is it supports DT binding. This allows us to use DT
for specifying controller and the new standalone USB 3.0 PHY driver.
Thanks to that we don't need out of tree patch adding PHY initialization
to the controller driver anymore.

1 files changed, 155 insertions, 0 deletions

diff --git a/target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
new file mode 100644
index 0000000..0e8a65a
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
@@ -0,0 +1,155 @@
+From 37df205cdb69d17d5e815385fc1af3c97d1fe20b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sat, 1 Oct 2016 22:54:48 +0200
+Subject: [PATCH] usb: xhci: add support for performing fake doorbell
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Broadcom's Northstar XHCI controllers seem to need a special start
+procedure to work correctly. There isn't any official documentation on
+this, the problem is that controller doesn't detect any connected
+devices with default setup. Moreover connecting USB device to controller
+that doesn't run properly can cause SoC's watchdog issues.
+
+A workaround that was successfully tested on multiple devices is to
+perform a fake doorbell. This patch adds code for doing that and a DT
+binding enabling it.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ Documentation/devicetree/bindings/usb/usb-xhci.txt |  2 +
+ drivers/usb/host/xhci-plat.c                       |  6 +++
+ drivers/usb/host/xhci.c                            | 63 ++++++++++++++++++++--
+ drivers/usb/host/xhci.h                            |  1 +
+ 4 files changed, 69 insertions(+), 3 deletions(-)
+
+--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
++++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
+@@ -12,6 +12,8 @@ Required properties:
+ Optional properties:
+   - clocks: reference to a clock
+   - usb3-lpm-capable: determines if platform is USB3 LPM capable
++  - usb3-fake-doorbell: determines if controller requires a fake doorbell when
++			starting it
+ 
+ Example:
+ 	usb@f0931000 {
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -38,12 +38,18 @@ static const struct xhci_driver_override
+ 
+ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
+ {
++	struct platform_device	*pdev = to_platform_device(dev);
++	struct device_node	*node = pdev->dev.of_node;
++
+ 	/*
+ 	 * As of now platform drivers don't provide MSI support so we ensure
+ 	 * here that the generic code does not try to make a pci_dev from our
+ 	 * dev struct in order to setup MSI
+ 	 */
+ 	xhci->quirks |= XHCI_PLAT;
++
++	if (node && of_property_read_bool(node, "usb3-fake-doorbell"))
++		xhci->quirks |= XHCI_FAKE_DOORBELL;
+ }
+ 
+ /* called during probe() after chip reset completes */
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -152,6 +152,49 @@ static int xhci_start(struct xhci_hcd *x
+ 	return ret;
+ }
+ 
++/**
++ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
++ *
++ * Some controllers require a fake doorbell to start correctly. Without that
++ * they simply don't detect any devices.
++ */
++static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
++{
++	u32 temp;
++
++	/* Alloc a virt device for that slot */
++	if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
++		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
++		return -ENOMEM;
++	}
++
++	/* Ring fake doorbell for slot_id ep 0 */
++	xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
++	usleep_range(1000, 1500);
++
++	/* Read the status to check if HSE is set or not */
++	temp = readl(&xhci->op_regs->status);
++
++	/* Clear HSE if set */
++	if (temp & STS_FATAL) {
++		xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
++		temp &= ~0x1fff;
++		temp |= STS_FATAL;
++		writel(temp, &xhci->op_regs->status);
++		usleep_range(1000, 1500);
++		readl(&xhci->op_regs->status);
++	}
++
++	/* Free virt device */
++	xhci_free_virt_device(xhci, slot_id);
++
++	/* We're done if controller is already running */
++	if (readl(&xhci->op_regs->command) & CMD_RUN)
++		return 0;
++
++	return xhci_start(xhci);
++}
++
+ /*
+  * Reset a halted HC.
+  *
+@@ -568,10 +611,20 @@ int xhci_init(struct usb_hcd *hcd)
+ 
+ static int xhci_run_finished(struct xhci_hcd *xhci)
+ {
+-	if (xhci_start(xhci)) {
+-		xhci_halt(xhci);
+-		return -ENODEV;
++	int err;
++
++	err = xhci_start(xhci);
++	if (err) {
++		err = -ENODEV;
++		goto err_halt;
++	}
++
++	if (xhci->quirks & XHCI_FAKE_DOORBELL) {
++		err = xhci_fake_doorbell(xhci, 1);
++		if (err)
++			goto err_halt;
+ 	}
++
+ 	xhci->shared_hcd->state = HC_STATE_RUNNING;
+ 	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+ 
+@@ -581,6 +634,10 @@ static int xhci_run_finished(struct xhci
+ 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ 			"Finished xhci_run for USB3 roothub");
+ 	return 0;
++
++err_halt:
++	xhci_halt(xhci);
++	return err;
+ }
+ 
+ /*
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -1631,6 +1631,7 @@ struct xhci_hcd {
+ /* For controllers with a broken beyond repair streams implementation */
+ #define XHCI_BROKEN_STREAMS	(1 << 19)
+ #define XHCI_PME_STUCK_QUIRK	(1 << 20)
++#define XHCI_FAKE_DOORBELL	(1 << 24)
+ 	unsigned int		num_active_eps;
+ 	unsigned int		limit_active_eps;
+ 	/* There are two roothubs to keep track of bus suspend info for */