Add bcm5354 patch from #2754

SVN-Revision: 9684

1 files changed, 155 insertions, 0 deletions

diff --git a/target/linux/brcm-2.4/patches/014-bcm5354.patch b/target/linux/brcm-2.4/patches/014-bcm5354.patch
new file mode 100644
index 0000000..fed89ca
--- /dev/null
+++ b/target/linux/brcm-2.4/patches/014-bcm5354.patch
@@ -0,0 +1,155 @@
+--- a/arch/mips/bcm947xx/include/sbchipc.h	2007-11-23 12:12:01.000000000 -0500
++++ b/arch/mips/bcm947xx/include/sbchipc.h	2007-11-25 06:16:42.000000000 -0500
+@@ -188,6 +188,7 @@
+ #define CAP_JTAGP		0x00400000	/* JTAG Master Present */
+ #define CAP_ROM			0x00800000	/* Internal boot rom active */
+ #define CAP_BKPLN64		0x08000000	/* 64-bit backplane */
++#define CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */
+ 
+ /* PLL type */
+ #define PLL_NONE		0x00000000
+@@ -199,6 +200,9 @@
+ #define PLL_TYPE6		0x00028000	/* 100/200 or 120/240 only */
+ #define PLL_TYPE7		0x00038000	/* 25Mhz, 4 dividers */
+ 
++/* watchdog clock */
++#define WATCHDOG_CLOCK_5354 32000 /* Hz */
++
+ /* corecontrol */
+ #define CC_UARTCLKO		0x00000001	/* Drive UART with internal clock */
+ #define	CC_SE			0x00000002	/* sync clk out enable (corerev >= 3) */
+--- a/arch/mips/bcm947xx/include/bcmdevs.h	2007-11-23 12:12:01.000000000 -0500
++++ b/arch/mips/bcm947xx/include/bcmdevs.h	2007-11-25 05:58:20.000000000 -0500
+@@ -121,6 +121,7 @@
+ #define BCM5365_CHIP_ID		0x5365          /* 5365 chipcommon chipid */
+ #define	BCM5350_CHIP_ID		0x5350		/* bcm5350 chipcommon chipid */
+ #define	BCM5352_CHIP_ID		0x5352		/* bcm5352 chipcommon chipid */
++#define	BCM5354_CHIP_ID		0x5354		/* bcm5354 chipcommon chipid */
+ 
+ #define	BCM4320_CHIP_ID		0x4320		/* bcm4320 chipcommon chipid */
+ 
+--- a/arch/mips/bcm947xx/sbmips.c	2007-11-23 12:12:02.000000000 -0500
++++ b/arch/mips/bcm947xx/sbmips.c	2007-11-25 05:40:40.000000000 -0500
+@@ -290,6 +290,12 @@
+ 		n = R_REG(osh, &eir->clockcontrol_n);
+ 		m = R_REG(osh, &eir->clockcontrol_sb);
+ 	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++   /* 5354 chip uses a non programmable PLL of frequency 240MHz */
++   if (sb_chip(sbh) == BCM5354_CHIP_ID) {
++     rate = 240000000;
++     goto out;
++   }
++
+ 		pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK;
+ 		n = R_REG(osh, &cc->clockcontrol_n);
+ 		if ((pll_type == PLL_TYPE2) ||
+@@ -612,6 +618,15 @@
+ 		clockcontrol_pci = &eir->clockcontrol_pci;
+ 		clockcontrol_m2 = &cc->clockcontrol_m2;
+ 	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++
++   /* 5354 chipcommon pll setting can't be changed.
++    * The PMU on power up comes up with the default clk frequency
++    * of 240MHz
++    */
++  if (sb_chip(sbh) == BCM5354_CHIP_ID) {
++    ret = TRUE;
++    goto done;
++  }
+ 		pll_type = R_REG(osh, &cc->capabilities) & CAP_PLL_MASK;
+ 		if (pll_type == PLL_TYPE6) {
+ 			clockcontrol_n = NULL;
+--- a/arch/mips/bcm947xx/sbutils.c	2007-11-23 12:12:02.000000000 -0500
++++ b/arch/mips/bcm947xx/sbutils.c	2007-11-25 06:22:43.000000000 -0500
+@@ -791,8 +791,14 @@
+ 	/* readback */
+ 	if (regoff >= SBCONFIGOFF)
+ 		w = R_SBREG(si, r);
+-	else
++	else {
++   if ((si->sb.chip == BCM5354_CHIP_ID) &&
++       (coreidx == SB_CC_IDX) &&
++       (regoff == OFFSETOF(chipcregs_t, watchdog))) {
++         w = val;
++   } else
+ 		w = R_REG(si->osh, r);
++ }
+ 
+ 	if (!fast) {
+ 		/* restore core index */
+@@ -1902,6 +1908,15 @@
+ 		n = R_REG(si->osh, &eir->clockcontrol_n);
+ 		m = R_REG(si->osh, &eir->clockcontrol_sb);
+ 	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++
++   if (R_REG(si->osh, &cc->capabilities) & CAP_PMU) {
++      if (sb_chip(sbh) == BCM5354_CHIP_ID) {
++        /* 5354 has a constant sb clock of 120MHz */
++        rate = 120000000;
++        goto end;
++      } else
++     ASSERT(0);
++   }
+ 		pll_type = R_REG(si->osh, &cc->capabilities) & CAP_PLL_MASK;
+ 		if (pll_type == PLL_NONE) {
+ 			INTR_RESTORE(si, intr_val);
+@@ -1929,6 +1944,7 @@
+ 			rate = rate / 2;
+ 	}
+ 
++end:
+ 	/* switch back to previous core */
+ 	sb_setcoreidx(sbh, idx);
+ 
+--- a/arch/mips/bcm947xx/hndchipc.c	2007-11-23 12:12:02.000000000 -0500
++++ b/arch/mips/bcm947xx/hndchipc.c	2007-11-25 06:31:15.000000000 -0500
+@@ -93,6 +93,9 @@
+ 		chipcregs_t *cc = (chipcregs_t *) regs;
+ 		uint32 rev, cap, pll, baud_base, div;
+ 
++  /* Default value */
++  div = 48;
++
+ 		/* Determine core revision and capabilities */
+ 		rev = sb_corerev(sbh);
+ 		cap = R_REG(osh, &cc->capabilities);
+@@ -108,22 +111,29 @@
+ 			                          R_REG(osh, &cc->clockcontrol_m2));
+ 			div = 1;
+ 		} else {
+-			/* Fixed ALP clock */
+-			if (rev >= 11 && rev != 15) {
+-				baud_base = 20000000;
++/* 5354 chip common uart uses a constant clock
++ * frequency of 25MHz */
++         if (sb_corerev(sbh) == 20) {
++                 /* Set the override bit so we don't divide it */
++                 W_REG(osh, &cc->corecontrol, CC_UARTCLKO);
++                 baud_base = 25000000;
++         } else if (rev >= 11 && rev != 15) {
++                 /* Fixed ALP clock */
++//                 baud_base = sb_alp_clock(sbh);
++                 baud_base = 20000000;
+ 				div = 1;
+ 				/* Set the override bit so we don't divide it */
+ 				W_REG(osh, &cc->corecontrol, CC_UARTCLKO);
+-			}
++			
+ 			/* Internal backplane clock */
+-			else if (rev >= 3) {
+-				baud_base = sb_clock(sbh);
+-				div = 2;	/* Minimum divisor */
+-				W_REG(osh, &cc->clkdiv,
++   } else if (rev >= 3) {
++				  baud_base = sb_clock(sbh);
++				  div = 2;	/* Minimum divisor */
++				  W_REG(osh, &cc->clkdiv,
+ 				      ((R_REG(osh, &cc->clkdiv) & ~CLKD_UART) | div));
+-			}
++
+ 			/* Fixed internal backplane clock */
+-			else {
++   } else {
+ 				baud_base = 88000000;
+ 				div = 48;
+ 			}