brcm2708: remove linux 3.18 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46870

1 files changed, 0 insertions, 128 deletions

diff --git a/target/linux/brcm2708/patches-3.18/0069-Fix-the-activity-LED-in-DT-mode.patch b/target/linux/brcm2708/patches-3.18/0069-Fix-the-activity-LED-in-DT-mode.patch
deleted file mode 100644
index 5a4d65c..0000000
--- a/target/linux/brcm2708/patches-3.18/0069-Fix-the-activity-LED-in-DT-mode.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 31b85ba13aa394c98f2d6955b55f3f9a0623c14d Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 6 Jan 2015 12:06:55 +0000
-Subject: [PATCH 069/114] Fix the activity LED in DT mode
-
-Add a "leds" node to the base DTBs, and a subnode for the activity
-LED. You can change the LED function like this:
-
-  dtparam=act_led_trigger=heartbeat
-
-Add aliases for the other main nodes (soc, intc).
-
-Issue: linux #757
----
- arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 18 ++++++++++++++----
- arch/arm/boot/dts/bcm2708-rpi-b.dts      | 18 ++++++++++++++----
- arch/arm/boot/dts/bcm2708.dtsi           | 11 ++++++++++-
- 3 files changed, 38 insertions(+), 9 deletions(-)
-
---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-@@ -7,11 +7,14 @@
- 	model = "Raspberry Pi Model B+";
- 
- 	aliases {
-+		soc = &soc;
- 		spi0 = &spi0;
- 		i2c0 = &i2c0;
- 		i2c1 = &i2c1;
- 		i2s  = &i2s;
- 		gpio = &gpio;
-+		intc = &intc;
-+		leds = &leds;
- 		sound = &sound;
- 	};
- 
-@@ -80,12 +83,19 @@
- 	pinctrl-0 = <&i2s_pins>;
- };
- 
-+&act_led {
-+	gpios = <&gpio 47 0>;
-+};
- 
- / {
- 	__overrides__ {
--		    i2s = <&i2s>,"status";
--		    spi = <&spi0>,"status";
--		    i2c0 = <&i2c0>,"status";
--		    i2c1 = <&i2c1>,"status";
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
- 	};
- };
---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
-@@ -7,11 +7,14 @@
- 	model = "Raspberry Pi Model B";
- 
- 	aliases {
-+		soc = &soc;
- 		spi0 = &spi0;
- 		i2c0 = &i2c0;
- 		i2c1 = &i2c1;
- 		i2s  = &i2s;
- 		gpio = &gpio;
-+		intc = &intc;
-+		leds = &leds;
- 		sound = &sound;
- 	};
- 
-@@ -80,12 +83,19 @@
- 	pinctrl-0 = <&i2s_pins>;
- };
- 
-+&act_led {
-+	gpios = <&gpio 16 1>;
-+};
- 
- / {
- 	__overrides__ {
--		    i2s = <&i2s>,"status";
--		    spi = <&spi0>,"status";
--		    i2c0 = <&i2c0>,"status";
--		    i2c1 = <&i2c1>,"status";
-+		i2s = <&i2s>,"status";
-+		spi = <&spi0>,"status";
-+		i2c0 = <&i2c0>,"status";
-+		i2c1 = <&i2c1>,"status";
-+
-+		act_led_gpio = <&act_led>,"gpios:4";
-+		act_led_activelow = <&act_led>,"gpios:8";
-+		act_led_trigger = <&act_led>,"linux,default-trigger";
- 	};
- };
---- a/arch/arm/boot/dts/bcm2708.dtsi
-+++ b/arch/arm/boot/dts/bcm2708.dtsi
-@@ -11,7 +11,7 @@
- 		bootargs = "";
- 	};
- 
--	soc {
-+	soc: soc {
- 		compatible = "simple-bus";
- 		#address-cells = <1>;
- 		#size-cells = <1>;
-@@ -76,6 +76,15 @@
- 			#size-cells = <0>;
- 			status = "disabled";
- 		};
-+
-+		leds: leds {
-+			compatible = "gpio-leds";
-+
-+			act_led: act {
-+				label = "ACT";
-+				linux,default-trigger = "mmc0";
-+			};
-+		};
- 	};
- 
- 	clocks {