brcm2708: remove linux 4.1 support

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48766

1 files changed, 0 insertions, 77 deletions

diff --git a/target/linux/brcm2708/patches-4.1/0107-BCM270X_DT-Overlay-for-the-Fen-Logic-VGA666-board.patch b/target/linux/brcm2708/patches-4.1/0107-BCM270X_DT-Overlay-for-the-Fen-Logic-VGA666-board.patch
deleted file mode 100644
index febf6dd..0000000
--- a/target/linux/brcm2708/patches-4.1/0107-BCM270X_DT-Overlay-for-the-Fen-Logic-VGA666-board.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 79373224e554f12a3094e0945bb107a3b1c3b275 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Tue, 30 Jun 2015 09:10:36 +0100
-Subject: [PATCH 107/222] BCM270X_DT: Overlay for the Fen Logic VGA666 board
-
-The VGA666 board requires GPIOs 2-21 (so no I2C or UART). Using the
-overlay (instead of a custom dt-blob.bin) has the advantage that it will
-reserve those pins and stop other devices using them (except for GPIO),
-but it does delay the point at which the output becomes valid until 2-3
-seconds after the kernel has started.
----
- arch/arm/boot/dts/overlays/Makefile           |  1 +
- arch/arm/boot/dts/overlays/README             |  8 +++++++
- arch/arm/boot/dts/overlays/vga666-overlay.dts | 30 +++++++++++++++++++++++++++
- 3 files changed, 39 insertions(+)
- create mode 100644 arch/arm/boot/dts/overlays/vga666-overlay.dts
-
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -43,6 +43,7 @@ dtb-$(RPI_DT_OVERLAYS) += spi-bcm2708-ov
- dtb-$(RPI_DT_OVERLAYS) += spi-bcm2835-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += tinylcd35-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += uart1-overlay.dtb
-+dtb-$(RPI_DT_OVERLAYS) += vga666-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += w1-gpio-overlay.dtb
- dtb-$(RPI_DT_OVERLAYS) += w1-gpio-pullup-overlay.dtb
- 
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -497,6 +497,14 @@ Params: txd1_pin                 GPIO pi
-         rxd1_pin                 GPIO pin for RXD1 (15, 33 or 41 - default 15)
- 
- 
-+Name:   vga666
-+Info:   Overlay for the Fen Logic VGA666 board
-+        This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds
-+        after the kernel has started.
-+Load:   dtoverlay=vga666
-+Params: <None>
-+
-+
- Name:   w1-gpio
- Info:   Configures the w1-gpio Onewire interface module.
-         Use this overlay if you *don't* need a GPIO to drive an external pullup.
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/vga666-overlay.dts
-@@ -0,0 +1,30 @@
-+/dts-v1/;
-+/plugin/;
-+
-+/{
-+	compatible = "brcm,bcm2708";
-+
-+	// There is no VGA driver module, but we need a platform device
-+	// node (that doesn't already use pinctrl) to hang the pinctrl
-+	// reference on - leds will do
-+
-+	fragment@0 {
-+		target = <&leds>;
-+		__overlay__ {
-+			pinctrl-names = "default";
-+			pinctrl-0 = <&vga666_pins>;
-+		};
-+	};
-+
-+	fragment@1 {
-+		target = <&gpio>;
-+		__overlay__ {
-+			vga666_pins: vga666_pins {
-+				brcm,pins = <2 3 4 5 6 7 8 9 10 11 12
-+					     13 14 15 16 17 18 19 20 21>;
-+				brcm,function = <6>; /* alt2 */
-+				brcm,pull = <0>; /* no pull */
-+			};
-+		};
-+	};
-+};