brcm2708: update to latest version

As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 210 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-4.4/0075-Add-driver-for-rpi-proto.patch b/target/linux/brcm2708/patches-4.4/0075-Add-driver-for-rpi-proto.patch
new file mode 100644
index 0000000..f99b5e9
--- /dev/null
+++ b/target/linux/brcm2708/patches-4.4/0075-Add-driver-for-rpi-proto.patch
@@ -0,0 +1,210 @@
+From a058f705de89cb54126d9bf8d099acb7ececb6e7 Mon Sep 17 00:00:00 2001
+From: Waldemar Brodkorb <wbrodkorb@conet.de>
+Date: Wed, 25 Mar 2015 09:26:17 +0100
+Subject: [PATCH 075/232] Add driver for rpi-proto
+
+Forward port of 3.10.x driver from https://github.com/koalo
+We are using a custom board and would like to use rpi 3.18.x
+kernel. Patch works fine for our embedded system.
+
+URL to the audio chip:
+http://www.mikroe.com/add-on-boards/audio-voice/audio-codec-proto/
+
+Playback tested with devicetree enabled.
+
+Signed-off-by: Waldemar Brodkorb <wbrodkorb@conet.de>
+---
+ sound/soc/bcm/Kconfig     |   7 +++
+ sound/soc/bcm/Makefile    |   2 +
+ sound/soc/bcm/rpi-proto.c | 153 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 162 insertions(+)
+ create mode 100644 sound/soc/bcm/rpi-proto.c
+
+--- a/sound/soc/bcm/Kconfig
++++ b/sound/soc/bcm/Kconfig
+@@ -43,6 +43,13 @@ config SND_BCM2708_SOC_RPI_DAC
+         help
+          Say Y or M if you want to add support for RPi-DAC.
+ 
++config SND_BCM2708_SOC_RPI_PROTO
++	tristate "Support for Rpi-PROTO"
++	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
++	select SND_SOC_WM8731
++	help
++	  Say Y or M if you want to add support for Audio Codec Board PROTO (WM8731).
++
+ config SND_BCM2708_SOC_IQAUDIO_DAC
+ 	tristate "Support for IQaudIO-DAC"
+ 	depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+--- a/sound/soc/bcm/Makefile
++++ b/sound/soc/bcm/Makefile
+@@ -9,6 +9,7 @@ snd-soc-hifiberry-dacplus-objs := hifibe
+ snd-soc-hifiberry-digi-objs := hifiberry_digi.o
+ snd-soc-hifiberry-amp-objs := hifiberry_amp.o
+ snd-soc-rpi-dac-objs := rpi-dac.o
++snd-soc-rpi-proto-objs := rpi-proto.o
+ snd-soc-iqaudio-dac-objs := iqaudio-dac.o
+ 
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DAC) += snd-soc-hifiberry-dac.o
+@@ -16,4 +17,5 @@ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_D
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DIGI) += snd-soc-hifiberry-digi.o
+ obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_AMP) += snd-soc-hifiberry-amp.o
+ obj-$(CONFIG_SND_BCM2708_SOC_RPI_DAC) += snd-soc-rpi-dac.o
++obj-$(CONFIG_SND_BCM2708_SOC_RPI_PROTO) += snd-soc-rpi-proto.o
+ obj-$(CONFIG_SND_BCM2708_SOC_IQAUDIO_DAC) += snd-soc-iqaudio-dac.o
+--- /dev/null
++++ b/sound/soc/bcm/rpi-proto.c
+@@ -0,0 +1,153 @@
++/*
++ * ASoC driver for PROTO AudioCODEC (with a WM8731)
++ * connected to a Raspberry Pi
++ *
++ * Author:      Florian Meier, <koalo@koalo.de>
++ *	      Copyright 2013
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/platform_device.h>
++
++#include <sound/core.h>
++#include <sound/pcm.h>
++#include <sound/soc.h>
++#include <sound/jack.h>
++
++#include "../codecs/wm8731.h"
++
++static const unsigned int wm8731_rates_12288000[] = {
++	8000, 32000, 48000, 96000,
++};
++
++static struct snd_pcm_hw_constraint_list wm8731_constraints_12288000 = {
++	.list = wm8731_rates_12288000,
++	.count = ARRAY_SIZE(wm8731_rates_12288000),
++};
++
++static int snd_rpi_proto_startup(struct snd_pcm_substream *substream)
++{
++	/* Setup constraints, because there is a 12.288 MHz XTAL on the board */
++	snd_pcm_hw_constraint_list(substream->runtime, 0,
++				SNDRV_PCM_HW_PARAM_RATE,
++				&wm8731_constraints_12288000);
++	return 0;
++}
++
++static int snd_rpi_proto_hw_params(struct snd_pcm_substream *substream,
++				       struct snd_pcm_hw_params *params)
++{
++	struct snd_soc_pcm_runtime *rtd = substream->private_data;
++	struct snd_soc_codec *codec = rtd->codec;
++	struct snd_soc_dai *codec_dai = rtd->codec_dai;
++	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
++	int sysclk = 12288000; /* This is fixed on this board */
++
++	/* Set proto bclk */
++	int ret = snd_soc_dai_set_bclk_ratio(cpu_dai,32*2);
++	if (ret < 0){
++		dev_err(codec->dev,
++				"Failed to set BCLK ratio %d\n", ret);
++		return ret;
++	}
++
++	/* Set proto sysclk */
++	ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
++			sysclk, SND_SOC_CLOCK_IN);
++	if (ret < 0) {
++		dev_err(codec->dev,
++				"Failed to set WM8731 SYSCLK: %d\n", ret);
++		return ret;
++	}
++
++	return 0;
++}
++
++/* machine stream operations */
++static struct snd_soc_ops snd_rpi_proto_ops = {
++	.startup = snd_rpi_proto_startup,
++	.hw_params = snd_rpi_proto_hw_params,
++};
++
++static struct snd_soc_dai_link snd_rpi_proto_dai[] = {
++{
++	.name		= "WM8731",
++	.stream_name	= "WM8731 HiFi",
++	.cpu_dai_name	= "bcm2708-i2s.0",
++	.codec_dai_name	= "wm8731-hifi",
++	.platform_name	= "bcm2708-i2s.0",
++	.codec_name	= "wm8731.1-001a",
++	.dai_fmt	= SND_SOC_DAIFMT_I2S
++				| SND_SOC_DAIFMT_NB_NF
++				| SND_SOC_DAIFMT_CBM_CFM,
++	.ops		= &snd_rpi_proto_ops,
++},
++};
++
++/* audio machine driver */
++static struct snd_soc_card snd_rpi_proto = {
++	.name		= "snd_rpi_proto",
++	.dai_link	= snd_rpi_proto_dai,
++	.num_links	= ARRAY_SIZE(snd_rpi_proto_dai),
++};
++
++static int snd_rpi_proto_probe(struct platform_device *pdev)
++{
++	int ret = 0;
++
++	snd_rpi_proto.dev = &pdev->dev;
++
++	if (pdev->dev.of_node) {
++		struct device_node *i2s_node;
++		struct snd_soc_dai_link *dai = &snd_rpi_proto_dai[0];
++		i2s_node = of_parse_phandle(pdev->dev.of_node,
++				            "i2s-controller", 0);
++
++		if (i2s_node) {
++			dai->cpu_dai_name = NULL;
++			dai->cpu_of_node = i2s_node;
++			dai->platform_name = NULL;
++			dai->platform_of_node = i2s_node;
++		}
++	}
++
++	ret = snd_soc_register_card(&snd_rpi_proto);
++	if (ret) {
++		dev_err(&pdev->dev,
++				"snd_soc_register_card() failed: %d\n", ret);
++	}
++
++	return ret;
++}
++
++
++static int snd_rpi_proto_remove(struct platform_device *pdev)
++{
++	return snd_soc_unregister_card(&snd_rpi_proto);
++}
++
++static const struct of_device_id snd_rpi_proto_of_match[] = {
++	{ .compatible = "rpi,rpi-proto", },
++	{},
++};
++MODULE_DEVICE_TABLE(of, snd_rpi_proto_of_match);
++
++static struct platform_driver snd_rpi_proto_driver = {
++	.driver = {
++		.name   = "snd-rpi-proto",
++		.owner  = THIS_MODULE,
++		.of_match_table = snd_rpi_proto_of_match,
++	},
++	.probe	  = snd_rpi_proto_probe,
++	.remove	 = snd_rpi_proto_remove,
++};
++
++module_platform_driver(snd_rpi_proto_driver);
++
++MODULE_AUTHOR("Florian Meier");
++MODULE_DESCRIPTION("ASoC Driver for Raspberry Pi connected to PROTO board (WM8731)");
++MODULE_LICENSE("GPL");