brcm2708: update to latest version

As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

1 files changed, 0 insertions, 39 deletions

diff --git a/target/linux/brcm2708/patches-4.4/0146-FIXUP-Overlay-README-Restore-spaces-deleted-in-error.patch b/target/linux/brcm2708/patches-4.4/0146-FIXUP-Overlay-README-Restore-spaces-deleted-in-error.patch
deleted file mode 100644
index 70a9fc7..0000000
--- a/target/linux/brcm2708/patches-4.4/0146-FIXUP-Overlay-README-Restore-spaces-deleted-in-error.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From d32795d2be55748552ddacd9b1e47efc61264a98 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Mon, 8 Feb 2016 12:53:44 +0000
-Subject: [PATCH 146/170] FIXUP: Overlay README - Restore spaces deleted in
- error
-
----
- arch/arm/boot/dts/overlays/README | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/overlays/README
-+++ b/arch/arm/boot/dts/overlays/README
-@@ -550,7 +550,7 @@ Info:   Configures a single PWM channel
-              Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
-           2) The onboard analogue audio output uses both PWM channels.
-           3) So be careful mixing audio and PWM.
--          4) Currently the clockmust have been enabled and configured
-+          4) Currently the clock must have been enabled and configured
-              by other means.
- Load:   dtoverlay=pwm,<param>=<val>
- Params: pin                     Output pin (default 18) - see table
-@@ -569,7 +569,7 @@ Info:   Configures both PWM channels
-              Pins 12 and 13 might be better choices on an A+, B+ or Pi2.
-           2) The onboard analogue audio output uses both PWM channels.
-           3) So be careful mixing audio and PWM.
--          4) Currently the clockmust have been enabled and configured
-+          4) Currently the clock must have been enabled and configured
-              by other means.
- Load:   dtoverlay=pwm-2chan,<param>=<val>
- Params: pin                     Output pin (default 18) - see table
-@@ -753,7 +753,7 @@ Params: <None>
- 
- Name:   vga666
- Info:   Overlay for the Fen Logic VGA666 board
--        This uses GPIOs 2-21 (sono I2C), and activates the output 2-3 seconds
-+        This uses GPIOs 2-21 (so no I2C), and activates the output 2-3 seconds
-         after the kernel has started.
- Load:   dtoverlay=vga666
- Params: <None>