summaryrefslogtreecommitdiff
path: root/target/linux/brcm2708/patches-4.9/0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch
diff options
context:
space:
mode:
authorRafał Miłecki <rafal@milecki.pl>2017-03-22 21:09:00 +0100
committerRafał Miłecki <rafal@milecki.pl>2017-03-24 08:06:35 +0100
commitfce21ae4ccfcee0c28fb18f5507e145fb0b02dec (patch)
tree6c29b7c1f65945991d0cae13af012e6c14adc713 /target/linux/brcm2708/patches-4.9/0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch
parent46e390322a58bdc632ee43fdf9d14115dac26e7a (diff)
downloadmtk-20170518-fce21ae4ccfcee0c28fb18f5507e145fb0b02dec.zip
mtk-20170518-fce21ae4ccfcee0c28fb18f5507e145fb0b02dec.tar.gz
mtk-20170518-fce21ae4ccfcee0c28fb18f5507e145fb0b02dec.tar.bz2
brcm2708: rename all patches from raspberrypi git tree to use 950 prefix
Right now all brcm2708 patches are extracted from the non-mainline raspberrypi/linux git tree. Many of them are hacks and/or are unneeded in LEDE. Raspberry Pi is getting better and better mainline support so it would be nice to finally start maintaining patches in a cleaner way: 1) Backport patches accepted in upstream tree 2) Start using upstream drivers 3) Pick only these patches that are needed for more complete support Handling above tasks requires grouping patches - ideally using the same prefixes as generic ones. It means we should rename existing patches to use some high prefix. This will allow e.g. use 0xx for backported code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
Diffstat (limited to 'target/linux/brcm2708/patches-4.9/0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch')
-rw-r--r--target/linux/brcm2708/patches-4.9/0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch28
1 files changed, 0 insertions, 28 deletions
diff --git a/target/linux/brcm2708/patches-4.9/0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch b/target/linux/brcm2708/patches-4.9/0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch
deleted file mode 100644
index 63df4a0..0000000
--- a/target/linux/brcm2708/patches-4.9/0134-BCM270X_DT-Add-reference-to-audio_pins-to-CM-dtb.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 8630b0b3fea31138c52ef83848ae1a047baa3855 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <phil@raspberrypi.org>
-Date: Mon, 23 Jan 2017 17:36:50 +0000
-Subject: [PATCH] BCM270X_DT: Add reference to audio_pins to CM dtb
-
-The CM1 dtb contains an empty audio_pins node, but no reference to it.
-Adding the usual pinctrl reference from the audio node enables the
-audremap overlay (and others) to easily turn on audio.
-
-Signed-off-by: Phil Elwell <phil@raspberrypi.org>
----
- arch/arm/boot/dts/bcm2708-rpi-cm.dts | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
-@@ -85,6 +85,11 @@
- pinctrl-0 = <&i2s_pins>;
- };
-
-+&audio {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&audio_pins>;
-+};
-+
- &hdmi {
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
- };