kernel: update kernel 4.9 to version 4.9.91

 * Refreshed patches.
 * Deleted 210-Revert-led-core-Fix-brightness-setting-when-setting-.patch (was accepted upstream)
 * Deleted 812-pci-dwc-fix-enumeration.patch (was accepted upstream)

Compile and run tested on lantiq

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

14 files changed, 58 insertions, 58 deletions

diff --git a/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
index dfa312b..152f9ab 100644
--- a/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0021-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch
@@ -19,7 +19,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1262,6 +1262,15 @@ static struct clk_hw *bcm2835_register_c
+@@ -1266,6 +1266,15 @@ static struct clk_hw *bcm2835_register_c
  	init.name = data->name;
  	init.flags = data->flags | CLK_IGNORE_UNUSED;
  
diff --git a/target/linux/brcm2708/patches-4.9/950-0026-Register-the-clocks-early-during-the-boot-process.patch b/target/linux/brcm2708/patches-4.9/950-0026-Register-the-clocks-early-during-the-boot-process.patch
index 9b2a613..be69c17 100644
--- a/target/linux/brcm2708/patches-4.9/950-0026-Register-the-clocks-early-during-the-boot-process.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0026-Register-the-clocks-early-during-the-boot-process.patch
@@ -13,7 +13,7 @@ Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1903,8 +1903,15 @@ static int bcm2835_clk_probe(struct plat
+@@ -1907,8 +1907,15 @@ static int bcm2835_clk_probe(struct plat
  	if (ret)
  		return ret;
  
@@ -30,7 +30,7 @@ Signed-off-by: Martin Sperl <kernel@martin.sperl.org>
  }
  
  static const struct of_device_id bcm2835_clk_of_match[] = {
-@@ -1921,7 +1928,11 @@ static struct platform_driver bcm2835_cl
+@@ -1925,7 +1932,11 @@ static struct platform_driver bcm2835_cl
  	.probe          = bcm2835_clk_probe,
  };
  
diff --git a/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
index ae90bea..3006fef 100644
--- a/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
@@ -707,7 +707,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
  		msleep(100);	/* Cool down */
 --- a/drivers/usb/core/message.c
 +++ b/drivers/usb/core/message.c
-@@ -1908,6 +1908,85 @@ free_interfaces:
+@@ -1912,6 +1912,85 @@ free_interfaces:
  	if (cp->string == NULL &&
  			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
  		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
diff --git a/target/linux/brcm2708/patches-4.9/950-0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch b/target/linux/brcm2708/patches-4.9/950-0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch
index 40963de8..07944df 100644
--- a/target/linux/brcm2708/patches-4.9/950-0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0087-amba_pl011-Don-t-use-DT-aliases-for-numbering.patch
@@ -14,7 +14,7 @@ use the same logic.
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -2441,7 +2441,12 @@ static int pl011_setup_port(struct devic
+@@ -2446,7 +2446,12 @@ static int pl011_setup_port(struct devic
  	if (IS_ERR(base))
  		return PTR_ERR(base);
  
diff --git a/target/linux/brcm2708/patches-4.9/950-0139-usb-dwc2-Avoid-suspending-if-we-re-in-gadget-mode-18.patch b/target/linux/brcm2708/patches-4.9/950-0139-usb-dwc2-Avoid-suspending-if-we-re-in-gadget-mode-18.patch
index 1ed31c2..50e1f47 100644
--- a/target/linux/brcm2708/patches-4.9/950-0139-usb-dwc2-Avoid-suspending-if-we-re-in-gadget-mode-18.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0139-usb-dwc2-Avoid-suspending-if-we-re-in-gadget-mode-18.patch
@@ -39,7 +39,7 @@ Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
 
 --- a/drivers/usb/dwc2/hcd.c
 +++ b/drivers/usb/dwc2/hcd.c
-@@ -4365,6 +4365,9 @@ static int _dwc2_hcd_suspend(struct usb_
+@@ -4366,6 +4366,9 @@ static int _dwc2_hcd_suspend(struct usb_
  	if (!HCD_HW_ACCESSIBLE(hcd))
  		goto unlock;
  
diff --git a/target/linux/brcm2708/patches-4.9/950-0152-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch b/target/linux/brcm2708/patches-4.9/950-0152-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch
index 448b037..d8617dd 100644
--- a/target/linux/brcm2708/patches-4.9/950-0152-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0152-clk-bcm-Support-rate-change-propagation-on-bcm2835-c.patch
@@ -34,7 +34,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	u32 ctl_reg;
  	u32 div_reg;
  
-@@ -1017,10 +1020,60 @@ bcm2835_clk_is_pllc(struct clk_hw *hw)
+@@ -1021,10 +1024,60 @@ bcm2835_clk_is_pllc(struct clk_hw *hw)
  	return strncmp(clk_hw_get_name(hw), "pllc", 4) == 0;
  }
  
@@ -96,7 +96,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	struct clk_hw *parent, *best_parent = NULL;
  	bool current_parent_is_pllc;
  	unsigned long rate, best_rate = 0;
-@@ -1048,9 +1101,8 @@ static int bcm2835_clock_determine_rate(
+@@ -1052,9 +1105,8 @@ static int bcm2835_clock_determine_rate(
  		if (bcm2835_clk_is_pllc(parent) && !current_parent_is_pllc)
  			continue;
  
@@ -108,7 +108,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  		if (rate > best_rate && rate <= req->rate) {
  			best_parent = parent;
  			best_prate = prate;
-@@ -1271,6 +1323,13 @@ static struct clk_hw *bcm2835_register_c
+@@ -1275,6 +1327,13 @@ static struct clk_hw *bcm2835_register_c
  	if ((cprman_read(cprman, data->ctl_reg) & CM_ENABLE) == 0)
  		init.flags &= ~CLK_IS_CRITICAL;
  
diff --git a/target/linux/brcm2708/patches-4.9/950-0153-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch b/target/linux/brcm2708/patches-4.9/950-0153-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch
index ed082ab..57517a9 100644
--- a/target/linux/brcm2708/patches-4.9/950-0153-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0153-clk-bcm-Allow-rate-change-propagation-to-PLLH_AUX-on.patch
@@ -19,7 +19,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1870,7 +1870,12 @@ static const struct bcm2835_clk_desc clk
+@@ -1874,7 +1874,12 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_VECCTL,
  		.div_reg = CM_VECDIV,
  		.int_bits = 4,
diff --git a/target/linux/brcm2708/patches-4.9/950-0154-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch b/target/linux/brcm2708/patches-4.9/950-0154-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch
index 01e2977..4ed9911 100644
--- a/target/linux/brcm2708/patches-4.9/950-0154-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0154-clk-bcm-Fix-maybe-uninitialized-warning-in-bcm2835_c.patch
@@ -18,7 +18,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1029,7 +1029,7 @@ static unsigned long bcm2835_clock_choos
+@@ -1033,7 +1033,7 @@ static unsigned long bcm2835_clock_choos
  	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
  	struct bcm2835_cprman *cprman = clock->cprman;
  	const struct bcm2835_clock_data *data = clock->data;
diff --git a/target/linux/brcm2708/patches-4.9/950-0155-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch b/target/linux/brcm2708/patches-4.9/950-0155-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch
index 154e061..1382204 100644
--- a/target/linux/brcm2708/patches-4.9/950-0155-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0155-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-DSI-.patch
@@ -31,7 +31,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  };
  
  struct bcm2835_clock_data {
-@@ -1252,7 +1253,7 @@ bcm2835_register_pll_divider(struct bcm2
+@@ -1256,7 +1257,7 @@ bcm2835_register_pll_divider(struct bcm2
  	init.num_parents = 1;
  	init.name = divider_name;
  	init.ops = &bcm2835_pll_divider_clk_ops;
@@ -40,7 +40,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL);
  	if (!divider)
-@@ -1475,7 +1476,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1479,7 +1480,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLA_CORE,
  		.load_mask = CM_PLLA_LOADCORE,
  		.hold_mask = CM_PLLA_HOLDCORE,
@@ -50,7 +50,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_PLLA_PER]	= REGISTER_PLL_DIV(
  		.name = "plla_per",
  		.source_pll = "plla",
-@@ -1483,7 +1485,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1487,7 +1489,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLA_PER,
  		.load_mask = CM_PLLA_LOADPER,
  		.hold_mask = CM_PLLA_HOLDPER,
@@ -60,7 +60,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_PLLA_DSI0]	= REGISTER_PLL_DIV(
  		.name = "plla_dsi0",
  		.source_pll = "plla",
-@@ -1499,7 +1502,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1503,7 +1506,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLA_CCP2,
  		.load_mask = CM_PLLA_LOADCCP2,
  		.hold_mask = CM_PLLA_HOLDCCP2,
@@ -70,7 +70,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/* PLLB is used for the ARM's clock. */
  	[BCM2835_PLLB]		= REGISTER_PLL(
-@@ -1523,7 +1527,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1527,7 +1531,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLB_ARM,
  		.load_mask = CM_PLLB_LOADARM,
  		.hold_mask = CM_PLLB_HOLDARM,
@@ -80,7 +80,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/*
  	 * PLLC is the core PLL, used to drive the core VPU clock.
-@@ -1552,7 +1557,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1556,7 +1561,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLC_CORE0,
  		.load_mask = CM_PLLC_LOADCORE0,
  		.hold_mask = CM_PLLC_HOLDCORE0,
@@ -90,7 +90,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_PLLC_CORE1]	= REGISTER_PLL_DIV(
  		.name = "pllc_core1",
  		.source_pll = "pllc",
-@@ -1560,7 +1566,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1564,7 +1570,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLC_CORE1,
  		.load_mask = CM_PLLC_LOADCORE1,
  		.hold_mask = CM_PLLC_HOLDCORE1,
@@ -100,7 +100,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_PLLC_CORE2]	= REGISTER_PLL_DIV(
  		.name = "pllc_core2",
  		.source_pll = "pllc",
-@@ -1568,7 +1575,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1572,7 +1579,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLC_CORE2,
  		.load_mask = CM_PLLC_LOADCORE2,
  		.hold_mask = CM_PLLC_HOLDCORE2,
@@ -110,7 +110,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_PLLC_PER]	= REGISTER_PLL_DIV(
  		.name = "pllc_per",
  		.source_pll = "pllc",
-@@ -1576,7 +1584,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1580,7 +1588,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLC_PER,
  		.load_mask = CM_PLLC_LOADPER,
  		.hold_mask = CM_PLLC_HOLDPER,
@@ -120,7 +120,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/*
  	 * PLLD is the display PLL, used to drive DSI display panels.
-@@ -1605,7 +1614,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1609,7 +1618,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLD_CORE,
  		.load_mask = CM_PLLD_LOADCORE,
  		.hold_mask = CM_PLLD_HOLDCORE,
@@ -130,7 +130,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_PLLD_PER]	= REGISTER_PLL_DIV(
  		.name = "plld_per",
  		.source_pll = "plld",
-@@ -1613,7 +1623,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1617,7 +1627,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLD_PER,
  		.load_mask = CM_PLLD_LOADPER,
  		.hold_mask = CM_PLLD_HOLDPER,
@@ -140,7 +140,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_PLLD_DSI0]	= REGISTER_PLL_DIV(
  		.name = "plld_dsi0",
  		.source_pll = "plld",
-@@ -1658,7 +1669,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1662,7 +1673,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLH_RCAL,
  		.load_mask = CM_PLLH_LOADRCAL,
  		.hold_mask = 0,
@@ -150,7 +150,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_PLLH_AUX]	= REGISTER_PLL_DIV(
  		.name = "pllh_aux",
  		.source_pll = "pllh",
-@@ -1666,7 +1678,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1670,7 +1682,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLH_AUX,
  		.load_mask = CM_PLLH_LOADAUX,
  		.hold_mask = 0,
@@ -160,7 +160,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_PLLH_PIX]	= REGISTER_PLL_DIV(
  		.name = "pllh_pix",
  		.source_pll = "pllh",
-@@ -1674,7 +1687,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1678,7 +1691,8 @@ static const struct bcm2835_clk_desc clk
  		.a2w_reg = A2W_PLLH_PIX,
  		.load_mask = CM_PLLH_LOADPIX,
  		.hold_mask = 0,
diff --git a/target/linux/brcm2708/patches-4.9/950-0156-clk-bcm2835-Register-the-DSI0-DSI1-pixel-clocks.patch b/target/linux/brcm2708/patches-4.9/950-0156-clk-bcm2835-Register-the-DSI0-DSI1-pixel-clocks.patch
index 24e8aed..61fae23 100644
--- a/target/linux/brcm2708/patches-4.9/950-0156-clk-bcm2835-Register-the-DSI0-DSI1-pixel-clocks.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0156-clk-bcm2835-Register-the-DSI0-DSI1-pixel-clocks.patch
@@ -76,7 +76,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/* Must be last */
  	struct clk_hw_onecell_data onecell;
-@@ -907,6 +928,9 @@ static long bcm2835_clock_rate_from_divi
+@@ -911,6 +932,9 @@ static long bcm2835_clock_rate_from_divi
  	const struct bcm2835_clock_data *data = clock->data;
  	u64 temp;
  
@@ -86,7 +86,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	/*
  	 * The divisor is a 12.12 fixed point field, but only some of
  	 * the bits are populated in any given clock.
-@@ -930,7 +954,12 @@ static unsigned long bcm2835_clock_get_r
+@@ -934,7 +958,12 @@ static unsigned long bcm2835_clock_get_r
  	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
  	struct bcm2835_cprman *cprman = clock->cprman;
  	const struct bcm2835_clock_data *data = clock->data;
@@ -100,7 +100,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
  }
-@@ -1209,7 +1238,7 @@ static struct clk_hw *bcm2835_register_p
+@@ -1213,7 +1242,7 @@ static struct clk_hw *bcm2835_register_p
  	memset(&init, 0, sizeof(init));
  
  	/* All of the PLLs derive from the external oscillator. */
@@ -109,7 +109,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	init.num_parents = 1;
  	init.name = data->name;
  	init.ops = &bcm2835_pll_clk_ops;
-@@ -1295,18 +1324,22 @@ static struct clk_hw *bcm2835_register_c
+@@ -1299,18 +1328,22 @@ static struct clk_hw *bcm2835_register_c
  	struct bcm2835_clock *clock;
  	struct clk_init_data init;
  	const char *parents[1 << CM_SRC_BITS];
@@ -139,7 +139,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	}
  
  	memset(&init, 0, sizeof(init));
-@@ -1442,6 +1475,47 @@ static const char *const bcm2835_clock_v
+@@ -1446,6 +1479,47 @@ static const char *const bcm2835_clock_v
  	__VA_ARGS__)
  
  /*
@@ -187,7 +187,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
   * the real definition of all the pll, pll_dividers and clocks
   * these make use of the above REGISTER_* macros
   */
-@@ -1904,6 +1978,18 @@ static const struct bcm2835_clk_desc clk
+@@ -1908,6 +1982,18 @@ static const struct bcm2835_clk_desc clk
  		.div_reg = CM_DSI1EDIV,
  		.int_bits = 4,
  		.frac_bits = 8),
@@ -206,7 +206,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/* the gates */
  
-@@ -1962,8 +2048,19 @@ static int bcm2835_clk_probe(struct plat
+@@ -1966,8 +2052,19 @@ static int bcm2835_clk_probe(struct plat
  	if (IS_ERR(cprman->regs))
  		return PTR_ERR(cprman->regs);
  
diff --git a/target/linux/brcm2708/patches-4.9/950-0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch b/target/linux/brcm2708/patches-4.9/950-0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch
index 16c5ec5..f419086 100644
--- a/target/linux/brcm2708/patches-4.9/950-0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0157-clk-bcm2835-Add-leaf-clock-measurement-support-disab.patch
@@ -107,7 +107,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  };
  
  struct bcm2835_gate_data {
-@@ -1008,6 +1067,17 @@ static int bcm2835_clock_on(struct clk_h
+@@ -1012,6 +1071,17 @@ static int bcm2835_clock_on(struct clk_h
  		     CM_GATE);
  	spin_unlock(&cprman->regs_lock);
  
@@ -125,7 +125,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	return 0;
  }
  
-@@ -1774,7 +1844,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1778,7 +1848,8 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_OTPCTL,
  		.div_reg = CM_OTPDIV,
  		.int_bits = 4,
@@ -135,7 +135,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	/*
  	 * Used for a 1Mhz clock for the system clocksource, and also used
  	 * bythe watchdog timer and the camera pulse generator.
-@@ -1808,13 +1879,15 @@ static const struct bcm2835_clk_desc clk
+@@ -1812,13 +1883,15 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_H264CTL,
  		.div_reg = CM_H264DIV,
  		.int_bits = 4,
@@ -153,7 +153,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/*
  	 * Secondary SDRAM clock.  Used for low-voltage modes when the PLL
-@@ -1825,13 +1898,15 @@ static const struct bcm2835_clk_desc clk
+@@ -1829,13 +1902,15 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_SDCCTL,
  		.div_reg = CM_SDCDIV,
  		.int_bits = 6,
@@ -171,7 +171,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	/*
  	 * VPU clock.  This doesn't have an enable bit, since it drives
  	 * the bus for everything else, and is special so it doesn't need
-@@ -1845,7 +1920,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1849,7 +1924,8 @@ static const struct bcm2835_clk_desc clk
  		.int_bits = 12,
  		.frac_bits = 8,
  		.flags = CLK_IS_CRITICAL,
@@ -181,7 +181,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/* clocks with per parent mux */
  	[BCM2835_CLOCK_AVEO]	= REGISTER_PER_CLK(
-@@ -1853,19 +1929,22 @@ static const struct bcm2835_clk_desc clk
+@@ -1857,19 +1933,22 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_AVEOCTL,
  		.div_reg = CM_AVEODIV,
  		.int_bits = 4,
@@ -207,7 +207,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_CLOCK_DFT]	= REGISTER_PER_CLK(
  		.name = "dft",
  		.ctl_reg = CM_DFTCTL,
-@@ -1877,7 +1956,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1881,7 +1960,8 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_DPICTL,
  		.div_reg = CM_DPIDIV,
  		.int_bits = 4,
@@ -217,7 +217,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/* Arasan EMMC clock */
  	[BCM2835_CLOCK_EMMC]	= REGISTER_PER_CLK(
-@@ -1885,7 +1965,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1889,7 +1969,8 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_EMMCCTL,
  		.div_reg = CM_EMMCDIV,
  		.int_bits = 4,
@@ -227,7 +227,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/* General purpose (GPIO) clocks */
  	[BCM2835_CLOCK_GP0]	= REGISTER_PER_CLK(
-@@ -1894,7 +1975,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1898,7 +1979,8 @@ static const struct bcm2835_clk_desc clk
  		.div_reg = CM_GP0DIV,
  		.int_bits = 12,
  		.frac_bits = 12,
@@ -237,7 +237,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_CLOCK_GP1]	= REGISTER_PER_CLK(
  		.name = "gp1",
  		.ctl_reg = CM_GP1CTL,
-@@ -1902,7 +1984,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1906,7 +1988,8 @@ static const struct bcm2835_clk_desc clk
  		.int_bits = 12,
  		.frac_bits = 12,
  		.flags = CLK_IS_CRITICAL,
@@ -247,7 +247,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  	[BCM2835_CLOCK_GP2]	= REGISTER_PER_CLK(
  		.name = "gp2",
  		.ctl_reg = CM_GP2CTL,
-@@ -1917,40 +2000,46 @@ static const struct bcm2835_clk_desc clk
+@@ -1921,40 +2004,46 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_HSMCTL,
  		.div_reg = CM_HSMDIV,
  		.int_bits = 4,
@@ -300,7 +300,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/* TV encoder clock.  Only operating frequency is 108Mhz.  */
  	[BCM2835_CLOCK_VEC]	= REGISTER_PER_CLK(
-@@ -1963,7 +2052,8 @@ static const struct bcm2835_clk_desc clk
+@@ -1967,7 +2056,8 @@ static const struct bcm2835_clk_desc clk
  		 * Allow rate change propagation only on PLLH_AUX which is
  		 * assigned index 7 in the parent array.
  		 */
@@ -310,7 +310,7 @@ Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
  
  	/* dsi clocks */
  	[BCM2835_CLOCK_DSI0E]	= REGISTER_PER_CLK(
-@@ -1971,25 +2061,29 @@ static const struct bcm2835_clk_desc clk
+@@ -1975,25 +2065,29 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_DSI0ECTL,
  		.div_reg = CM_DSI0EDIV,
  		.int_bits = 4,
diff --git a/target/linux/brcm2708/patches-4.9/950-0185-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch b/target/linux/brcm2708/patches-4.9/950-0185-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch
index 13f6c11..c8e7151 100644
--- a/target/linux/brcm2708/patches-4.9/950-0185-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0185-clk-bcm2835-Mark-used-PLLs-and-dividers-CRITICAL.patch
@@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1366,6 +1366,11 @@ bcm2835_register_pll_divider(struct bcm2
+@@ -1370,6 +1370,11 @@ bcm2835_register_pll_divider(struct bcm2
  	divider->div.hw.init = &init;
  	divider->div.table = NULL;
  
diff --git a/target/linux/brcm2708/patches-4.9/950-0186-clk-bcm2835-Add-claim-clocks-property.patch b/target/linux/brcm2708/patches-4.9/950-0186-clk-bcm2835-Add-claim-clocks-property.patch
index 09dcfa7..09d449a 100644
--- a/target/linux/brcm2708/patches-4.9/950-0186-clk-bcm2835-Add-claim-clocks-property.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0186-clk-bcm2835-Add-claim-clocks-property.patch
@@ -48,7 +48,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  		cma-192 = <0>,"-0+1-2-3-4";
 --- a/drivers/clk/bcm/clk-bcm2835.c
 +++ b/drivers/clk/bcm/clk-bcm2835.c
-@@ -1298,6 +1298,8 @@ static const struct clk_ops bcm2835_vpu_
+@@ -1302,6 +1302,8 @@ static const struct clk_ops bcm2835_vpu_
  	.debug_init = bcm2835_clock_debug_init,
  };
  
@@ -57,7 +57,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
  					   const struct bcm2835_pll_data *data)
  {
-@@ -1314,6 +1316,9 @@ static struct clk_hw *bcm2835_register_p
+@@ -1318,6 +1320,9 @@ static struct clk_hw *bcm2835_register_p
  	init.ops = &bcm2835_pll_clk_ops;
  	init.flags = CLK_IGNORE_UNUSED;
  
@@ -67,7 +67,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
  	if (!pll)
  		return NULL;
-@@ -1367,8 +1372,10 @@ bcm2835_register_pll_divider(struct bcm2
+@@ -1371,8 +1376,10 @@ bcm2835_register_pll_divider(struct bcm2
  	divider->div.table = NULL;
  
  	if (!(cprman_read(cprman, data->cm_reg) & data->hold_mask)) {
@@ -80,7 +80,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	}
  
  	divider->cprman = cprman;
-@@ -2104,6 +2111,8 @@ static const struct bcm2835_clk_desc clk
+@@ -2108,6 +2115,8 @@ static const struct bcm2835_clk_desc clk
  		.ctl_reg = CM_PERIICTL),
  };
  
@@ -89,7 +89,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  /*
   * Permanently take a reference on the parent of the SDRAM clock.
   *
-@@ -2123,6 +2132,19 @@ static int bcm2835_mark_sdc_parent_criti
+@@ -2127,6 +2136,19 @@ static int bcm2835_mark_sdc_parent_criti
  	return clk_prepare_enable(parent);
  }
  
@@ -109,7 +109,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static int bcm2835_clk_probe(struct platform_device *pdev)
  {
  	struct device *dev = &pdev->dev;
-@@ -2132,6 +2154,7 @@ static int bcm2835_clk_probe(struct plat
+@@ -2136,6 +2158,7 @@ static int bcm2835_clk_probe(struct plat
  	const struct bcm2835_clk_desc *desc;
  	const size_t asize = ARRAY_SIZE(clk_desc_array);
  	size_t i;
@@ -117,7 +117,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  	int ret;
  
  	cprman = devm_kzalloc(dev, sizeof(*cprman) +
-@@ -2147,6 +2170,13 @@ static int bcm2835_clk_probe(struct plat
+@@ -2151,6 +2174,13 @@ static int bcm2835_clk_probe(struct plat
  	if (IS_ERR(cprman->regs))
  		return PTR_ERR(cprman->regs);
  
diff --git a/target/linux/brcm2708/patches-4.9/950-0195-amba_pl011-Round-input-clock-up.patch b/target/linux/brcm2708/patches-4.9/950-0195-amba_pl011-Round-input-clock-up.patch
index 2bd501d..11293c3 100644
--- a/target/linux/brcm2708/patches-4.9/950-0195-amba_pl011-Round-input-clock-up.patch
+++ b/target/linux/brcm2708/patches-4.9/950-0195-amba_pl011-Round-input-clock-up.patch
@@ -26,7 +26,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
 
 --- a/drivers/tty/serial/amba-pl011.c
 +++ b/drivers/tty/serial/amba-pl011.c
-@@ -1646,6 +1646,23 @@ static void pl011_put_poll_char(struct u
+@@ -1651,6 +1651,23 @@ static void pl011_put_poll_char(struct u
  
  #endif /* CONFIG_CONSOLE_POLL */
  
@@ -50,7 +50,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static int pl011_hwinit(struct uart_port *port)
  {
  	struct uart_amba_port *uap =
-@@ -1662,7 +1679,7 @@ static int pl011_hwinit(struct uart_port
+@@ -1667,7 +1684,7 @@ static int pl011_hwinit(struct uart_port
  	if (retval)
  		return retval;
  
@@ -59,7 +59,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  
  	/* Clear pending error and receive interrupts */
  	pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS |
-@@ -2300,7 +2317,7 @@ static int __init pl011_console_setup(st
+@@ -2305,7 +2322,7 @@ static int __init pl011_console_setup(st
  			plat->init();
  	}
  
@@ -68,7 +68,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  
  	if (uap->vendor->fixed_options) {
  		baud = uap->fixed_baud;
-@@ -2372,6 +2389,7 @@ static struct uart_driver amba_reg = {
+@@ -2377,6 +2394,7 @@ static struct uart_driver amba_reg = {
  	.cons			= AMBA_CONSOLE,
  };
  
@@ -76,7 +76,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org>
  static int pl011_probe_dt_alias(int index, struct device *dev)
  {
  	struct device_node *np;
-@@ -2403,6 +2421,7 @@ static int pl011_probe_dt_alias(int inde
+@@ -2408,6 +2426,7 @@ static int pl011_probe_dt_alias(int inde
  
  	return ret;
  }