diff options
| author | Hauke Mehrtens <hauke@hauke-m.de> | 2013-02-04 22:40:57 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2013-02-04 22:40:57 +0000 |
| commit | a1e3c0ca46dabc9ba5a904d0bf5726c251ffece5 (patch) | |
| tree | d8b75912775ac952058a7205ad35bf307f9b2eb2 /target/linux/brcm47xx/base-files | |
| parent | c2198aba320bf354de00cc76e1ae990da24ee1ec (diff) | |
| download | mtk-20170518-a1e3c0ca46dabc9ba5a904d0bf5726c251ffece5.zip mtk-20170518-a1e3c0ca46dabc9ba5a904d0bf5726c251ffece5.tar.gz mtk-20170518-a1e3c0ca46dabc9ba5a904d0bf5726c251ffece5.tar.bz2 | |
Add Failsafe support for Linksys E3000V1 / WRT610NV2
Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2
in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to
be expanded. Is there a way to determine the correct cpu_port to use in a
generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if
"/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could
a similar method be used in "/etc/init.d/netconfig"?
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 35491
Diffstat (limited to 'target/linux/brcm47xx/base-files')
| -rw-r--r-- | target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm index fd2a935..1275b03 100644 --- a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm +++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm @@ -14,6 +14,7 @@ set_preinit_iface() { # hardware specific overrides case "$(cat /proc/diag/model)" in "Linksys WAP54G V1") ifname=eth1;; + "Linksys E3000 V1"|"Linksys WRT610N V2") cpu_port="8u*";; "ASUS WL-HDD") ifname=eth1;; "ASUS WL-300g") ifname=eth1;; "ASUS (unknown, BCM4702)") ifname=eth1;; |