First step to upgrade of brcm47xx to kernel version 2.6.25

SVN-Revision: 10939

1 files changed, 163 insertions, 0 deletions

diff --git a/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch b/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch
new file mode 100644
index 0000000..132b41d
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.25/690-mips-allow-pciregister-after-boot.patch
@@ -0,0 +1,163 @@
+Allow registering PCI devices after early boot.
+
+This is an ugly hack and needs to be rewritten before going upstream.
+Index: linux-2.6.23.16/arch/mips/pci/pci.c
+===================================================================
+--- linux-2.6.23.16.orig/arch/mips/pci/pci.c	2008-02-20 16:06:36.000000000 +0100
++++ linux-2.6.23.16/arch/mips/pci/pci.c	2008-02-20 16:09:33.000000000 +0100
+@@ -21,6 +21,17 @@
+  */
+ int pci_probe_only;
+ 
++/*
++ * Indicate whether PCI-bios init was already done.
++ */
++static int pcibios_init_done;
++
++/*
++ * The currently used busnumber.
++ */
++static int next_busno;
++static int need_domain_info;
++
+ #define PCI_ASSIGN_ALL_BUSSES	1
+ 
+ unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
+@@ -75,8 +86,32 @@ pcibios_align_resource(void *data, struc
+ 	res->start = start;
+ }
+ 
+-void __devinit register_pci_controller(struct pci_controller *hose)
++/* Most MIPS systems have straight-forward swizzling needs.  */
++
++static inline u8 bridge_swizzle(u8 pin, u8 slot)
++{
++	return (((pin - 1) + slot) % 4) + 1;
++}
++
++static u8 common_swizzle(struct pci_dev *dev, u8 *pinp)
+ {
++	u8 pin = *pinp;
++
++	while (dev->bus->parent) {
++		pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
++		/* Move up the chain of bridges. */
++		dev = dev->bus->self;
++        }
++	*pinp = pin;
++
++	/* The slot is the slot of the last bridge. */
++	return PCI_SLOT(dev->devfn);
++}
++
++void register_pci_controller(struct pci_controller *hose)
++{
++	struct pci_bus *bus;
++
+ 	if (request_resource(&iomem_resource, hose->mem_resource) < 0)
+ 		goto out;
+ 	if (request_resource(&ioport_resource, hose->io_resource) < 0) {
+@@ -84,9 +119,6 @@ void __devinit register_pci_controller(s
+ 		goto out;
+ 	}
+ 
+-	*hose_tail = hose;
+-	hose_tail = &hose->next;
+-
+ 	/*
+ 	 * Do not panic here but later - this might hapen before console init.
+ 	 */
+@@ -94,41 +126,47 @@ void __devinit register_pci_controller(s
+ 		printk(KERN_WARNING
+ 		       "registering PCI controller with io_map_base unset\n");
+ 	}
+-	return;
+ 
+-out:
+-	printk(KERN_WARNING
+-	       "Skipping PCI bus scan due to resource conflict\n");
+-}
++	if (pcibios_init_done) {
++		//TODO
+ 
+-/* Most MIPS systems have straight-forward swizzling needs.  */
++		printk(KERN_INFO "Registering a PCI bus after boot\n");
+ 
+-static inline u8 bridge_swizzle(u8 pin, u8 slot)
+-{
+-	return (((pin - 1) + slot) % 4) + 1;
+-}
++		if (!hose->iommu)
++			PCI_DMA_BUS_IS_PHYS = 1;
+ 
+-static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
+-{
+-	u8 pin = *pinp;
++		bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
++		hose->bus = bus;
++		need_domain_info = need_domain_info || hose->index;
++		hose->need_domain_info = need_domain_info;
++		if (bus) {
++			next_busno = bus->subordinate + 1;
++			/* Don't allow 8-bit bus number overflow inside the hose -
++			   reserve some space for bridges. */
++			if (next_busno > 224) {
++				next_busno = 0;
++				need_domain_info = 1;
++			}
++		}
++		if (!pci_probe_only)
++			pci_assign_unassigned_resources();
++		pci_fixup_irqs(common_swizzle, pcibios_map_irq);
++	} else {
++		*hose_tail = hose;
++		hose_tail = &hose->next;
++	}
+ 
+-	while (dev->bus->parent) {
+-		pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+-		/* Move up the chain of bridges. */
+-		dev = dev->bus->self;
+-        }
+-	*pinp = pin;
++	return;
+ 
+-	/* The slot is the slot of the last bridge. */
+-	return PCI_SLOT(dev->devfn);
++out:
++	printk(KERN_WARNING
++	       "Skipping PCI bus scan due to resource conflict\n");
+ }
+ 
+ static int __init pcibios_init(void)
+ {
+ 	struct pci_controller *hose;
+ 	struct pci_bus *bus;
+-	int next_busno;
+-	int need_domain_info = 0;
+ 
+ 	/* Scan all of the recorded PCI controllers.  */
+ 	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
+@@ -157,6 +195,7 @@ static int __init pcibios_init(void)
+ 	if (!pci_probe_only)
+ 		pci_assign_unassigned_resources();
+ 	pci_fixup_irqs(common_swizzle, pcibios_map_irq);
++	pcibios_init_done = 1;
+ 
+ 	return 0;
+ }
+Index: linux-2.6.23.16/drivers/ssb/main.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/main.c	2008-02-20 16:06:36.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/main.c	2008-02-20 18:33:21.000000000 +0100
+@@ -1185,9 +1185,7 @@ static int __init ssb_modinit(void)
+ /* ssb must be initialized after PCI but before the ssb drivers.
+  * That means we must use some initcall between subsys_initcall
+  * and device_initcall. */
+-//FIXME on embedded we need to be early to make sure we can register
+-//      a new PCI bus, if needed.
+-subsys_initcall(ssb_modinit);
++fs_initcall(ssb_modinit);
+ 
+ static void __exit ssb_modexit(void)
+ {