kernel: update 3.14 to 3.14.18

Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463

5 files changed, 5 insertions, 27 deletions

diff --git a/target/linux/brcm47xx/Makefile b/target/linux/brcm47xx/Makefile
index 1daa6a4..c15ba1c 100644
--- a/target/linux/brcm47xx/Makefile
+++ b/target/linux/brcm47xx/Makefile
@@ -13,7 +13,7 @@ FEATURES:=squashfs usb
 SUBTARGETS:=generic mips74k legacy
 MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
 
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/brcm47xx/patches-3.14/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch b/target/linux/brcm47xx/patches-3.14/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch
index e5bdb97..ea15933 100644
--- a/target/linux/brcm47xx/patches-3.14/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch
+++ b/target/linux/brcm47xx/patches-3.14/128-MIPS-BCM47XX-Add-new-file-for-device-specific-workar.patch
@@ -34,7 +34,7 @@ V2: Drop pr_debug for devices we don't need workarounds for. It was too
  #endif
 --- a/arch/mips/bcm47xx/setup.c
 +++ b/arch/mips/bcm47xx/setup.c
-@@ -282,6 +282,7 @@ static int __init bcm47xx_register_bus_c
+@@ -286,6 +286,7 @@ static int __init bcm47xx_register_bus_c
  	}
  	bcm47xx_buttons_register();
  	bcm47xx_leds_register();
diff --git a/target/linux/brcm47xx/patches-3.14/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch b/target/linux/brcm47xx/patches-3.14/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch
index 777e93b..2504f41 100644
--- a/target/linux/brcm47xx/patches-3.14/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch
+++ b/target/linux/brcm47xx/patches-3.14/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch
@@ -132,7 +132,7 @@ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
 +#endif /* defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM) */
 --- a/arch/mips/bcm47xx/setup.c
 +++ b/arch/mips/bcm47xx/setup.c
-@@ -227,6 +227,9 @@ void __init plat_mem_setup(void)
+@@ -231,6 +231,9 @@ void __init plat_mem_setup(void)
  		bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
  		bcm47xx_register_bcma();
  		bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
diff --git a/target/linux/brcm47xx/patches-3.14/830-huawei_e970_support.patch b/target/linux/brcm47xx/patches-3.14/830-huawei_e970_support.patch
index ee35eed..5425d04 100644
--- a/target/linux/brcm47xx/patches-3.14/830-huawei_e970_support.patch
+++ b/target/linux/brcm47xx/patches-3.14/830-huawei_e970_support.patch
@@ -8,7 +8,7 @@
  #include <asm/bootinfo.h>
  #include <asm/idle.h>
  #include <asm/prom.h>
-@@ -278,6 +279,33 @@ static struct fixed_phy_status bcm47xx_f
+@@ -282,6 +283,33 @@ static struct fixed_phy_status bcm47xx_f
  	.duplex	= DUPLEX_FULL,
  };
  
@@ -42,7 +42,7 @@
  static int __init bcm47xx_register_bus_complete(void)
  {
  	switch (bcm47xx_bus_type) {
-@@ -297,6 +325,7 @@ static int __init bcm47xx_register_bus_c
+@@ -301,6 +329,7 @@ static int __init bcm47xx_register_bus_c
  	bcm47xx_workarounds();
  
  	fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
diff --git a/target/linux/brcm47xx/patches-3.14/960-fix-phy-device.patch b/target/linux/brcm47xx/patches-3.14/960-fix-phy-device.patch
deleted file mode 100644
index f8d9239..0000000
--- a/target/linux/brcm47xx/patches-3.14/960-fix-phy-device.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-This fixes a problem introduced in this commit:
-
-commit 87aa9f9c61ad56d505641681812e92ad976f8608
-Author: Florian Fainelli <f.fainelli@gmail.com>
-Date:   Fri Dec 6 13:01:34 2013 -0800
-
-    net: phy: consolidate PHY reset in phy_init_hw()
-
-The fixups are not executed before the switch gets registered but after 
-the kernel searches for the right switch driver. When the search is 
-executed it searches for the phy_id 0x00, because it was not fixed.
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -353,6 +353,7 @@ int phy_device_register(struct phy_devic
- 	phydev->bus->phy_map[phydev->addr] = phydev;
- 
- 	/* Run all of the fixups for this PHY */
-+	phy_scan_fixups(phydev);
- 	err = phy_init_hw(phydev);
- 	if (err) {
- 		pr_err("PHY %d failed to initialize\n", phydev->addr);