add back the base-files/image code from brcm-2.4 to brcm47xx

SVN-Revision: 21945

23 files changed, 1880 insertions, 0 deletions

diff --git a/target/linux/brcm47xx/base-files.mk b/target/linux/brcm47xx/base-files.mk
new file mode 100644
index 0000000..d6682bd
--- /dev/null
+++ b/target/linux/brcm47xx/base-files.mk
@@ -0,0 +1,5 @@
+define Package/base-files/install-target
+	rm -f $(1)/etc/config/network
+endef
+
+
diff --git a/target/linux/brcm47xx/base-files/etc/diag.sh b/target/linux/brcm47xx/base-files/etc/diag.sh
new file mode 100644
index 0000000..3b08554
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/etc/diag.sh
@@ -0,0 +1,28 @@
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+set_led() {
+	local led="$1"
+	local state="$2"
+	[ -f "/proc/diag/led/$1" ] && echo "$state" > "/proc/diag/led/$1"
+}
+
+set_state() {
+	case "$1" in
+		preinit)
+			set_led dmz 1
+			set_led diag 1
+			set_led power 0
+		;;
+		failsafe)
+			set_led diag f
+			set_led power f
+			set_led dmz f
+		;;
+		done)
+			set_led dmz 0
+			set_led diag 0
+			set_led power 1
+		;;
+	esac
+}
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/netconfig b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
new file mode 100755
index 0000000..d7839b6
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/etc/init.d/netconfig
@@ -0,0 +1,248 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=05
+
+start() {
+	[ -e /etc/config/network ] && {
+		local batch
+
+		config_cb() {
+			case "$1" in
+			switch)
+				option_cb() {
+					case "$1" in
+					vlan[0-9]|vlan1[0-5])
+						local id="${1#vlan}"
+						local ports="${2%\*}"
+						append batch "delete network.eth0.${1}${N}"
+						append batch "set network.eth0_${id}=switch_vlan${N}"
+						append batch "set network.eth0_${id}.device=eth0${N}"
+						append batch "set network.eth0_${id}.vlan=${id}${N}"
+						append batch "set network.eth0_${id}.ports='${ports}'${N}"
+					;;
+					esac
+				}
+			;;
+			switch_vlan)
+				option_cb() { :; }
+				batch=""
+			;;
+			esac
+		}
+
+		config_load network
+
+		[ -n "$batch" ] && {
+			logger -t netconfig "migrating switch config to new format ..."
+			echo "$batch${N}commit network" | uci batch
+		}
+
+		exit 0
+	}
+
+	mkdir -p /etc/config
+
+	(
+		if grep -E 'mtd0: 000(6|a)0000' /proc/mtd 2>&- >&-; then
+			# WGT634u
+			echo boardtype=wgt634u
+		else
+			strings "$(find_mtd_part nvram)"
+		fi
+	) | awk '
+	function p(cfgname, name) {
+		if (c[name] != "") print "	option " cfgname "	\"" c[name] "\""
+	}
+
+	function vlan(id, name) {
+		if (c[name] != "") {
+			print "config switch_vlan eth0_" id
+			print "	option device   \"eth0\""
+			print "	option vlan     " id
+			print "	option ports    \"" c[name] "\""
+			print ""
+		}
+	}
+
+	function macinc(mac, maca, i, result) {
+		split(mac, maca, ":")
+		for (i = 1; i <= 6; i++) maca[i] = "0x" maca[i]
+		if (++maca[6] > 0xff) {
+			maca[5]++
+			maca[6] = 0
+		}
+		for (i = 1; i <= 6; i++) {
+			if (i != 1) result = result ":"
+			result = result sprintf("%02x", maca[i])
+		}
+		return result
+	}
+
+	BEGIN {
+		FS="="
+		c["lan_ifname"]="eth0.0"
+		c["wan_ifname"]="eth0.1"
+		c["vlan0ports"]="1 2 3 4 5"
+		c["vlan1ports"]="0 5"
+		getline < "/proc/diag/model"
+		model=$0
+		for (i = 0; i < 6; i++) {
+			if (mac_check != "") mac_check = mac_check ":"
+			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
+		}
+	}
+
+	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
+		nvram[$1] = $2
+	}
+
+	END {
+		if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
+			c["wan_ifname"] = ""
+			c["lan_ifname"] = "eth1"
+		}
+		if (model == "ASUS WL-330gE") {
+			c["wan_ifname"] = ""
+			c["lan_ifname"] = "eth0"
+			c["vlan0ports"] = ""
+			c["vlan1ports"] = ""
+		}
+		if ((model == "ASUS WL-500g") || (model == "Microsoft MN-700")) {
+			c["wan_ifname"] = "eth1"
+			c["lan_ifname"] = "eth0"
+		}
+		if ((model == "ASUS WL-500g Premium V2") || (model == "Dell TrueMobile 2300 v2") || (model == "Buffalo WHR-G125")) {
+			c["vlan0ports"] = "0 1 2 3 5"
+			c["vlan1ports"] = "4 5"
+		}
+		if (model == "Dell TrueMobile 2300") {
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+		}
+		if (nvram["boardtype"] == "bcm94710r4") {
+			# Toshiba WRC-1000
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+		}
+		if ((nvram["boardtype"] == "wgt634u") || (nvram["boardtype"] == "0x0467")) {
+			c["vlan0ports"] = "0 1 2 3 5"
+			c["vlan1ports"] = "4 5"
+		}
+		if ((nvram["boardtype"] == "0x042f") || (nvram["boardtype"] == "0x0472")) {
+			if (nvram["boardnum"] == "45") {
+				# WL-500gP
+				c["vlan0ports"] = "1 2 3 4 5"
+				c["vlan1ports"] = "0 5"
+			} else {
+				# Generic BCM94704
+				c["vlan0ports"] = "0 1 2 3 4 5u"
+				c["vlan1ports"] = ""
+				c["lan_ifname"] = "eth0"
+				c["wan_ifname"] = "eth1"
+
+				# MAC addresses on 4704 tend to be screwed up. Add a workaround here
+				if (nvram["et0macaddr"] ~ mac_check) {
+					c["lan_macaddr"] = nvram["et0macaddr"]
+					c["wan_macaddr"] = macinc(c["lan_macaddr"])
+				}
+			}
+		}
+		# Buffalo WBR-B11 and Buffalo WBR-G54
+		if (nvram["boardtype"] == "bcm94710ap") {
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+		}
+		# generic broadcom 4705/4785 processor with 5397 switch?
+		#  EXCEPT Linksys WRT300N V1.1
+		if ((nvram["boardtype"] == "0x478") && \
+		    (model != "Linksys WRT300N V1.1")) {
+			c["vlan0ports"] = "1 2 3 4 8*"
+			c["vlan1ports"] = "0 8"
+		}
+
+		# WAP54G
+		if ((nvram["boardnum"] == "2") || \
+			(nvram["boardnum"] == "1024")) {
+			c["lan_ifname"]="eth0"
+			c["wan_ifname"]=""
+		}
+
+		# Sitecom WL-105b
+		if ((nvram["boardum"] == "2") && \
+			(nvram["GemtekPmonVer"] == "1")) {
+			c["lan_ifname"]="eth0"
+			c["wan_ifname"]=""
+		}
+
+		# ASUS WL-700gE
+		# These are actually same as defaults above. For some reason this script applies
+		# Generic BCM94704 settings instead so we revert to proper settings here.
+		# Hopefully someone will fix this properly soon.
+		if (model == "ASUS WL-700gE") {
+			c["lan_ifname"]="eth0.0"
+			c["wan_ifname"]="eth0.1"
+			c["vlan0ports"]="1 2 3 4 5"
+			c["vlan1ports"]="0 5"
+		}
+
+		if (model == "Motorola WR850G V2/V3") {
+			c["vlan0ports"]="0 1 2 3 5"
+			c["vlan1ports"]="4 5"
+		}
+		if (model == "ASUS WL-500W") {
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+		}
+		if (model == "OvisLink WL-1600GL") {
+			c["lan_ifname"] = "eth0.0"
+			c["wan_ifname"] = "eth0.1"
+			c["vlan0ports"] = "0 1 2 3 5"
+			c["vlan1ports"] = "4 5"
+		}
+
+		if (c["vlan0ports"] || c["vlan1ports"]) {
+			print "#### VLAN configuration "
+			print "config switch eth0"
+			print "	option enable   1"
+			print ""		
+			vlan(0, "vlan0ports")
+			vlan(1, "vlan1ports")
+		}
+		print "#### Loopback configuration"
+		print "config interface loopback"
+		print "	option ifname	\"lo\""
+		print "	option proto	static"
+		print "	option ipaddr	127.0.0.1"
+		print "	option netmask	255.0.0.0"
+		print ""
+		print ""
+		print "#### LAN configuration"
+		print "config interface lan"
+		print "	option type 	bridge"
+		p("ifname", "lan_ifname")
+		p("macaddr", "lan_macaddr")
+		print "	option proto	static"
+		print "	option ipaddr	192.168.1.1"
+		print "	option netmask	255.255.255.0"
+		print ""
+		print ""
+		if (c["wan_ifname"]) {
+			print "#### WAN configuration"
+			print "config interface	wan"
+			p("ifname", "wan_ifname")
+			p("macaddr", "wan_macaddr")
+			print "	option proto	dhcp"
+		} else {
+			print "#### WAN configuration (disabled)"
+			print "#config interface wan"
+			print "#	option proto	dhcp"
+		}
+	}' > /etc/config/network
+}
diff --git a/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup b/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup
new file mode 100755
index 0000000..ee1b752
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/etc/init.d/wmacfixup
@@ -0,0 +1,33 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2010 OpenWrt.org
+
+START=41
+
+boot() {
+	[ -d /sys/class/ieee80211 ] || exit
+
+	commit=0
+
+	fixup_wmac() {
+		local cfg="$1"
+		local cfmac
+
+		config_get cfmac "$cfg" macaddr
+
+		[ "$cfmac" != "00:90:4c:5f:00:2a" ] || {
+			local nvmac="$(nvram get il0macaddr 2>/dev/null)"
+			[ -n "$nvmac" ] && [ "$nvmac != "$cfmac ] && {
+				uci set wireless.$cfg.macaddr="$nvmac"
+				commit=1
+			}
+		}
+	}
+
+	config_load wireless
+	config_foreach fixup_wmac wifi-device
+
+	[ "$commit" = 1 ] && uci commit wireless
+}
+
+start() { :; }
+stop()  { :; }
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm b/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm
new file mode 100644
index 0000000..b0f4a4e
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/03_init_hotplug_failsafe_brcm
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+init_hotplug_failsafe() {
+	echo '/sbin/hotplug.failsafe' > /proc/sys/kernel/hotplug
+}
+
+boot_hook_add preinit_main init_hotplug_failsafe
+
+
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
new file mode 100644
index 0000000..3cd760e
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+set_preinit_iface() {
+	ifname=eth0
+
+	insmod diag
+
+	# hardware specific overrides
+	case "$(cat /proc/diag/model)" in
+		"Linksys WAP54G V1") ifname=eth1;;
+		"ASUS WL-HDD") ifname=eth1;;
+		"ASUS WL-300g") ifname=eth1;;
+		"ASUS (unknown, BCM4702)") ifname=eth1;;
+		"Sitecom WL-105b") ifname=eth1;;
+	esac
+	ifconfig $ifname 0.0.0.0 up
+}
+
+check_module () {
+  module="$1"; shift; params="$*"
+
+  insmod "$module" "$params"
+  sleep 1
+  grep "^$module" /proc/modules
+  return $?
+}
+
+init_iface() {
+	check_module tg3
+	insmod switch-core
+	check_module switch-robo || check_module switch-adm  || { 
+	  check_module bcm57xx activate_gpio=0x4 && cpu_port="8u*"
+	} || rmmod switch-core
+}
+
+boot_hook_add preinit_main set_preinit_iface
+boot_hook_add preinit_main init_iface
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
new file mode 100644
index 0000000..a93559f
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/05_set_failsafe_switch_brcm
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+failsafe_ip() {
+	[ -d /proc/switch/eth0 ] && [ "$ifname" = "eth0" ] && {
+		ifconfig eth0 0.0.0.0 down
+		echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+	}
+	
+	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
+        	ifconfig $pi_ifname $pi_ip netmask $pi_netmask broadcast $pi_broadcast up
+        }
+}
+
+boot_hook_add failsafe failsafe_ip
+
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm
new file mode 100644
index 0000000..fd5add1
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/15_mount_proc_brcm
@@ -0,0 +1,6 @@
+#!/bin/sh
+
+do_mount_procfs() {
+	mount none /proc -t proc
+}
+
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
new file mode 100644
index 0000000..fdc7c71
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/15_set_preinit_interface_brcm
@@ -0,0 +1,39 @@
+#!/bin/sh
+
+port_net_echo() {
+	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
+		if [ "$pi_preinit_net_messages" = "y" ] || [ "$pi_failsafe_net_message" = "true" ] && [ "$pi_preinit_no_failsafe_netmsg" != "y" ]; then 
+			netmsg $pi_broadcast "$1"
+		fi
+	}
+}
+
+preinit_ip_deconfig() {
+	if [ -z "$pi_ifname" ]; then
+		ifconfig $ifname 0.0.0.0 down
+	else
+		grep -q "$pi_ifname" /proc/net/dev && {
+			ifconfig $pi_ifname 0.0.0.0 down
+		}
+	fi
+}
+
+preinit_net_echo() {
+	preinit_ip
+	
+	[ -d /proc/switch/eth0 ] && [ "$pi_ifname" = "eth0" ] && {
+		echo 1 > /proc/switch/eth0/reset
+
+		# this would be easier if we blasted the message across all ports
+		# but we don't want packets leaking across interfaces
+		for port in $(seq 0 4); do {
+			echo "$port ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+			port_net_echo $1
+		}; done
+		
+		echo "0 ${cpu_port:-5u*}" > /proc/switch/eth0/vlan/0/ports
+		
+	} || port_net_echo $1
+}
+
+
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm
new file mode 100644
index 0000000..f030cb2
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_net_echo_brcm
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+indicate_failsafe() {
+	preinit_net_echo() {
+		port_net_echo $1
+	}
+	echo "- failsafe -"
+	preinit_net_echo "Entering Failsafe!\n"
+	indicate_failsafe_led
+}
+
+
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm
new file mode 100644
index 0000000..da721b8
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/preinit/20_failsafe_set_boot_wait_brcm
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+. /etc/functions.sh
+
+set_boot_wait() {
+	[ -x "/usr/sbin/nvram" ] && {
+		[ "$(nvram get boot_wait)" != "on" ] && {
+			nvram set boot_wait=on
+			nvram commit
+		}
+	}
+}
+
+boot_hook_add failsafe set_boot_wait
diff --git a/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh b/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh
new file mode 100644
index 0000000..9921cf5
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/lib/upgrade/platform.sh
@@ -0,0 +1,16 @@
+PART_NAME=linux
+
+platform_check_image() {
+	[ "$ARGC" -gt 1 ] && return 1
+
+	case "$(get_magic_word "$1")" in
+		# .trx files
+		4844) return 0;;
+		*)
+			echo "Invalid image type. Please use only .trx files"
+			return 1
+		;;
+	esac
+}
+
+# use default for platform_do_upgrade()
diff --git a/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe b/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe
new file mode 100755
index 0000000..0544339
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/sbin/hotplug.failsafe
@@ -0,0 +1,4 @@
+#!/bin/sh
+case "$1" in
+	button) kill -USR1 1;;
+esac
diff --git a/target/linux/brcm47xx/image/Makefile b/target/linux/brcm47xx/image/Makefile
new file mode 100644
index 0000000..b839a42
--- /dev/null
+++ b/target/linux/brcm47xx/image/Makefile
@@ -0,0 +1,110 @@
+# 
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Build/Clean
+	$(MAKE) -C lzma-loader clean
+endef
+
+define Image/Prepare
+	cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
+	rm -f $(KDIR)/loader.gz
+	$(MAKE) -C lzma-loader \
+		BUILD_DIR="$(KDIR)" \
+		TARGET="$(KDIR)" \
+		clean install
+	echo -ne "\\x00" >> $(KDIR)/loader.gz
+	rm -f $(KDIR)/fs_mark
+	touch $(KDIR)/fs_mark
+	$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
+endef
+
+ifneq ($(KERNEL),2.4)
+  define Image/Build/wgt634u
+	dd if=$(KDIR)/loader.elf of=$(BIN_DIR)/openwrt-wgt634u-$(2).bin bs=131072 conv=sync
+	cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx >> $(BIN_DIR)/openwrt-wgt634u-$(2).bin
+  endef
+endif
+
+define Image/Build/CyberTAN
+	$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
+endef
+define Image/Build/CyberTAN2
+	$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/openwrt-$(2)-$(5)-sysupgrade.bin -o $(BIN_DIR)/openwrt-$(2)-$(5)-factory.bin $(if $(6),-s $(6))
+endef
+define Image/Build/CyberTANHead
+	$(STAGING_DIR_HOST)/bin/addpattern -5 -p $(3) -v v$(4) -i /dev/null -o $(KDIR)/openwrt-$(2)-header.bin $(if $(6),-s $(6))
+endef
+
+define Image/Build/Motorola
+	$(STAGING_DIR_HOST)/bin/motorola-bin -$(3) $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(4).bin
+endef
+
+define Image/Build/USR
+	$(STAGING_DIR_HOST)/bin/trx2usr $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin
+endef
+
+define trxalign/jffs2-128k
+-a 0x20000 -f $(KDIR)/root.$(1)
+endef
+define trxalign/jffs2-64k
+-a 0x10000 -f $(KDIR)/root.$(1)
+endef
+define trxalign/squashfs
+-a 1024 -f $(KDIR)/root.$(1) $(if $(2),-f $(2)) -a 0x10000 -A $(KDIR)/fs_mark
+endef
+
+define Image/Build/trxV2
+	$(call Image/Build/CyberTANHead,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
+	$(STAGING_DIR_HOST)/bin/trx -2 -o $(BIN_DIR)/openwrt-$(2)-$(5)-sysupgrade.bin \
+		-f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
+		$(call trxalign/$(1),$(1),$(KDIR)/openwrt-$(2)-header.bin)
+	$(call Image/Build/CyberTAN2,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
+endef
+
+define Image/Build/jffs2-128k
+	$(call Image/Build/CyberTAN,$(1),wrt54gs,W54S,4.80.1,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/CyberTAN,$(1),wrtsl54gs,W54U,2.08.1,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/trxV2,$(1),wrt54g3gv2-vf,3G2V,3.00.24,$(patsubst jffs2-%,jffs2,$(1)),6)
+  ifeq ($(KERNEL),2.6)
+	$(call Image/Build/wgt634u,$(1),$(patsubst jffs2-%,jffs2,$(1)))
+  endif
+endef
+
+define Image/Build/jffs2-64k
+	$(call Image/Build/CyberTAN,$(1),wrt54g3g,W54F,2.20.1,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/CyberTAN,$(1),wrt54g3g-em,W3GN,2.20.1,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/CyberTAN,$(1),wrt54g,W54G,4.71.1,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/CyberTAN,$(1),wrt54gs_v4,W54s,1.09.1,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/CyberTAN,$(1),wrt150n,N150,1.51.3,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/CyberTAN,$(1),wrt300n_v1,EWCB,1.03.6,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/CyberTAN,$(1),wrt300n_v11,EWC2,1.51.2,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/CyberTAN,$(1),wrt350n_v1,EWCG,1.04.1,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Motorola,$(1),wa840g,2,$(patsubst jffs2-%,jffs2,$(1)))
+	$(call Image/Build/Motorola,$(1),we800g,3,$(patsubst jffs2-%,jffs2,$(1)))
+endef
+
+define Image/Build/squashfs
+	$(call Image/Build/jffs2-64k,$(1))
+	$(call Image/Build/jffs2-128k,$(1))
+endef
+
+define Image/Build/Initramfs
+	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs.trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma
+endef
+
+define Image/Build
+	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx \
+		-f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
+		$(call trxalign/$(1),$(1))
+	$(call Image/Build/$(1),$(1))
+	$(call Image/Build/Motorola,$(1),wr850g,1,$(1))
+	$(call Image/Build/USR,$(1),usr5461,$(1))
+endef
+
+$(eval $(call BuildImage))
diff --git a/target/linux/brcm47xx/image/lzma-loader/Makefile b/target/linux/brcm47xx/image/lzma-loader/Makefile
new file mode 100644
index 0000000..5dd6f50
--- /dev/null
+++ b/target/linux/brcm47xx/image/lzma-loader/Makefile
@@ -0,0 +1,33 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME := lzma-loader
+PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
+
+$(PKG_BUILD_DIR)/.prepared:
+	mkdir $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+	touch $@
+
+$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared
+	$(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \
+		LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)"
+
+download: 
+prepare: $(PKG_BUILD_DIR)/.prepared
+compile: $(PKG_BUILD_DIR)/loader.gz
+install:
+
+ifneq ($(TARGET),)
+install: compile
+	$(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/
+endif
+
+clean:
+	rm -rf $(PKG_BUILD_DIR)
diff --git a/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.c b/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.c
new file mode 100644
index 0000000..951700b
--- /dev/null
+++ b/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.c
@@ -0,0 +1,663 @@
+/*
+  LzmaDecode.c
+  LZMA Decoder
+  
+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#include "LzmaDecode.h"
+
+#ifndef Byte
+#define Byte unsigned char
+#endif
+
+#define kNumTopBits 24
+#define kTopValue ((UInt32)1 << kNumTopBits)
+
+#define kNumBitModelTotalBits 11
+#define kBitModelTotal (1 << kNumBitModelTotalBits)
+#define kNumMoveBits 5
+
+typedef struct _CRangeDecoder
+{
+  Byte *Buffer;
+  Byte *BufferLim;
+  UInt32 Range;
+  UInt32 Code;
+  #ifdef _LZMA_IN_CB
+  ILzmaInCallback *InCallback;
+  int Result;
+  #endif
+  int ExtraBytes;
+} CRangeDecoder;
+
+Byte RangeDecoderReadByte(CRangeDecoder *rd)
+{
+  if (rd->Buffer == rd->BufferLim)
+  {
+    #ifdef _LZMA_IN_CB
+    UInt32 size;
+    rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size);
+    rd->BufferLim = rd->Buffer + size;
+    if (size == 0)
+    #endif
+    {
+      rd->ExtraBytes = 1;
+      return 0xFF;
+    }
+  }
+  return (*rd->Buffer++);
+}
+
+/* #define ReadByte (*rd->Buffer++) */
+#define ReadByte (RangeDecoderReadByte(rd))
+
+void RangeDecoderInit(CRangeDecoder *rd,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+  #else
+    Byte *stream, UInt32 bufferSize
+  #endif
+    )
+{
+  int i;
+  #ifdef _LZMA_IN_CB
+  rd->InCallback = inCallback;
+  rd->Buffer = rd->BufferLim = 0;
+  #else
+  rd->Buffer = stream;
+  rd->BufferLim = stream + bufferSize;
+  #endif
+  rd->ExtraBytes = 0;
+  rd->Code = 0;
+  rd->Range = (0xFFFFFFFF);
+  for(i = 0; i < 5; i++)
+    rd->Code = (rd->Code << 8) | ReadByte;
+}
+
+#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code;        
+#define RC_FLUSH_VAR rd->Range = range; rd->Code = code;
+#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; }
+
+UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits)
+{
+  RC_INIT_VAR
+  UInt32 result = 0;
+  int i;
+  for (i = numTotalBits; i > 0; i--)
+  {
+    /* UInt32 t; */
+    range >>= 1;
+
+    result <<= 1;
+    if (code >= range)
+    {
+      code -= range;
+      result |= 1;
+    }
+    /*
+    t = (code - range) >> 31;
+    t &= 1;
+    code -= range & (t - 1);
+    result = (result + result) | (1 - t);
+    */
+    RC_NORMALIZE
+  }
+  RC_FLUSH_VAR
+  return result;
+}
+
+int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd)
+{
+  UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob;
+  if (rd->Code < bound)
+  {
+    rd->Range = bound;
+    *prob += (kBitModelTotal - *prob) >> kNumMoveBits;
+    if (rd->Range < kTopValue)
+    {
+      rd->Code = (rd->Code << 8) | ReadByte;
+      rd->Range <<= 8;
+    }
+    return 0;
+  }
+  else
+  {
+    rd->Range -= bound;
+    rd->Code -= bound;
+    *prob -= (*prob) >> kNumMoveBits;
+    if (rd->Range < kTopValue)
+    {
+      rd->Code = (rd->Code << 8) | ReadByte;
+      rd->Range <<= 8;
+    }
+    return 1;
+  }
+}
+
+#define RC_GET_BIT2(prob, mi, A0, A1) \
+  UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \
+  if (code < bound) \
+    { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \
+  else \
+    { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \
+  RC_NORMALIZE
+
+#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;)               
+
+int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+  int mi = 1;
+  int i;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  for(i = numLevels; i > 0; i--)
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + mi;
+    RC_GET_BIT(prob, mi)
+    #else
+    mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd);
+    #endif
+  }
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return mi - (1 << numLevels);
+}
+
+int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd)
+{
+  int mi = 1;
+  int i;
+  int symbol = 0;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  for(i = 0; i < numLevels; i++)
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + mi;
+    RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i))
+    #else
+    int bit = RangeDecoderBitDecode(probs + mi, rd);
+    mi = mi + mi + bit;
+    symbol |= (bit << i);
+    #endif
+  }
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd)
+{ 
+  int symbol = 1;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  do
+  {
+    #ifdef _LZMA_LOC_OPT
+    CProb *prob = probs + symbol;
+    RC_GET_BIT(prob, symbol)
+    #else
+    symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+    #endif
+  }
+  while (symbol < 0x100);
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte)
+{ 
+  int symbol = 1;
+  #ifdef _LZMA_LOC_OPT
+  RC_INIT_VAR
+  #endif
+  do
+  {
+    int bit;
+    int matchBit = (matchByte >> 7) & 1;
+    matchByte <<= 1;
+    #ifdef _LZMA_LOC_OPT
+    {
+      CProb *prob = probs + ((1 + matchBit) << 8) + symbol;
+      RC_GET_BIT2(prob, symbol, bit = 0, bit = 1)
+    }
+    #else
+    bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd);
+    symbol = (symbol << 1) | bit;
+    #endif
+    if (matchBit != bit)
+    {
+      while (symbol < 0x100)
+      {
+        #ifdef _LZMA_LOC_OPT
+        CProb *prob = probs + symbol;
+        RC_GET_BIT(prob, symbol)
+        #else
+        symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd);
+        #endif
+      }
+      break;
+    }
+  }
+  while (symbol < 0x100);
+  #ifdef _LZMA_LOC_OPT
+  RC_FLUSH_VAR
+  #endif
+  return symbol;
+}
+
+#define kNumPosBitsMax 4
+#define kNumPosStatesMax (1 << kNumPosBitsMax)
+
+#define kLenNumLowBits 3
+#define kLenNumLowSymbols (1 << kLenNumLowBits)
+#define kLenNumMidBits 3
+#define kLenNumMidSymbols (1 << kLenNumMidBits)
+#define kLenNumHighBits 8
+#define kLenNumHighSymbols (1 << kLenNumHighBits)
+
+#define LenChoice 0
+#define LenChoice2 (LenChoice + 1)
+#define LenLow (LenChoice2 + 1)
+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
+#define kNumLenProbs (LenHigh + kLenNumHighSymbols) 
+
+int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState)
+{
+  if(RangeDecoderBitDecode(p + LenChoice, rd) == 0)
+    return RangeDecoderBitTreeDecode(p + LenLow +
+        (posState << kLenNumLowBits), kLenNumLowBits, rd);
+  if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0)
+    return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid +
+        (posState << kLenNumMidBits), kLenNumMidBits, rd);
+  return kLenNumLowSymbols + kLenNumMidSymbols + 
+      RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd);
+}
+
+#define kNumStates 12
+
+#define kStartPosModelIndex 4
+#define kEndPosModelIndex 14
+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
+
+#define kNumPosSlotBits 6
+#define kNumLenToPosStates 4
+
+#define kNumAlignBits 4
+#define kAlignTableSize (1 << kNumAlignBits)
+
+#define kMatchMinLen 2
+
+#define IsMatch 0
+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
+#define IsRepG0 (IsRep + kNumStates)
+#define IsRepG1 (IsRepG0 + kNumStates)
+#define IsRepG2 (IsRepG1 + kNumStates)
+#define IsRep0Long (IsRepG2 + kNumStates)
+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
+#define LenCoder (Align + kAlignTableSize)
+#define RepLenCoder (LenCoder + kNumLenProbs)
+#define Literal (RepLenCoder + kNumLenProbs)
+
+#if Literal != LZMA_BASE_SIZE
+StopCompilingDueBUG
+#endif
+
+#ifdef _LZMA_OUT_READ
+
+typedef struct _LzmaVarState
+{
+  CRangeDecoder RangeDecoder;
+  Byte *Dictionary;
+  UInt32 DictionarySize;
+  UInt32 DictionaryPos;
+  UInt32 GlobalPos;
+  UInt32 Reps[4];
+  int lc;
+  int lp;
+  int pb;
+  int State;
+  int PreviousIsMatch;
+  int RemainLen;
+} LzmaVarState;
+
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+    #else
+    unsigned char *inStream, UInt32 inSize
+    #endif
+    )
+{
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  UInt32 i;
+  if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  vs->Dictionary = dictionary;
+  vs->DictionarySize = dictionarySize;
+  vs->DictionaryPos = 0;
+  vs->GlobalPos = 0;
+  vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1;
+  vs->lc = lc;
+  vs->lp = lp;
+  vs->pb = pb;
+  vs->State = 0;
+  vs->PreviousIsMatch = 0;
+  vs->RemainLen = 0;
+  dictionary[dictionarySize - 1] = 0;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1; 
+  RangeDecoderInit(&vs->RangeDecoder, 
+      #ifdef _LZMA_IN_CB
+      inCallback
+      #else
+      inStream, inSize
+      #endif
+  );
+  return LZMA_RESULT_OK;
+}
+
+int LzmaDecode(unsigned char *buffer, 
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  LzmaVarState *vs = (LzmaVarState *)buffer;
+  CProb *p = (CProb *)(buffer + sizeof(LzmaVarState));
+  CRangeDecoder rd = vs->RangeDecoder;
+  int state = vs->State;
+  int previousIsMatch = vs->PreviousIsMatch;
+  Byte previousByte;
+  UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << (vs->pb)) - 1;
+  UInt32 literalPosMask = (1 << (vs->lp)) - 1;
+  int lc = vs->lc;
+  int len = vs->RemainLen;
+  UInt32 globalPos = vs->GlobalPos;
+
+  Byte *dictionary = vs->Dictionary;
+  UInt32 dictionarySize = vs->DictionarySize;
+  UInt32 dictionaryPos = vs->DictionaryPos;
+
+  if (len == -1)
+  {
+    *outSizeProcessed = 0;
+    return LZMA_RESULT_OK;
+  }
+
+  while(len > 0 && nowPos < outSize)
+  {
+    UInt32 pos = dictionaryPos - rep0;
+    if (pos >= dictionarySize)
+      pos += dictionarySize;
+    outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
+    if (++dictionaryPos == dictionarySize)
+      dictionaryPos = 0;
+    len--;
+  }
+  if (dictionaryPos == 0)
+    previousByte = dictionary[dictionarySize - 1];
+  else
+    previousByte = dictionary[dictionaryPos - 1];
+#else
+
+int LzmaDecode(
+    Byte *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+    #else
+    unsigned char *inStream, UInt32 inSize,
+    #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed)
+{
+  UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp));
+  CProb *p = (CProb *)buffer;
+  CRangeDecoder rd;
+  UInt32 i;
+  int state = 0;
+  int previousIsMatch = 0;
+  Byte previousByte = 0;
+  UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
+  UInt32 nowPos = 0;
+  UInt32 posStateMask = (1 << pb) - 1;
+  UInt32 literalPosMask = (1 << lp) - 1;
+  int len = 0;
+  if (bufferSize < numProbs * sizeof(CProb))
+    return LZMA_RESULT_NOT_ENOUGH_MEM;
+  for (i = 0; i < numProbs; i++)
+    p[i] = kBitModelTotal >> 1; 
+  RangeDecoderInit(&rd, 
+      #ifdef _LZMA_IN_CB
+      inCallback
+      #else
+      inStream, inSize
+      #endif
+      );
+#endif
+
+  *outSizeProcessed = 0;
+  while(nowPos < outSize)
+  {
+    int posState = (int)(
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & posStateMask);
+    #ifdef _LZMA_IN_CB
+    if (rd.Result != LZMA_RESULT_OK)
+      return rd.Result;
+    #endif
+    if (rd.ExtraBytes != 0)
+      return LZMA_RESULT_DATA_ERROR;
+    if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0)
+    {
+      CProb *probs = p + Literal + (LZMA_LIT_SIZE * 
+        (((
+        (nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+        & literalPosMask) << lc) + (previousByte >> (8 - lc))));
+
+      if (state < 4) state = 0;
+      else if (state < 10) state -= 3;
+      else state -= 6;
+      if (previousIsMatch)
+      {
+        Byte matchByte;
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        matchByte = dictionary[pos];
+        #else
+        matchByte = outStream[nowPos - rep0];
+        #endif
+        previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte);
+        previousIsMatch = 0;
+      }
+      else
+        previousByte = LzmaLiteralDecode(probs, &rd);
+      outStream[nowPos++] = previousByte;
+      #ifdef _LZMA_OUT_READ
+      dictionary[dictionaryPos] = previousByte;
+      if (++dictionaryPos == dictionarySize)
+        dictionaryPos = 0;
+      #endif
+    }
+    else             
+    {
+      previousIsMatch = 1;
+      if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1)
+      {
+        if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0)
+        {
+          if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0)
+          {
+            #ifdef _LZMA_OUT_READ
+            UInt32 pos;
+            #endif
+            if (
+               (nowPos 
+                #ifdef _LZMA_OUT_READ
+                + globalPos
+                #endif
+               )
+               == 0)
+              return LZMA_RESULT_DATA_ERROR;
+            state = state < 7 ? 9 : 11;
+            #ifdef _LZMA_OUT_READ
+            pos = dictionaryPos - rep0;
+            if (pos >= dictionarySize)
+              pos += dictionarySize;
+            previousByte = dictionary[pos];
+            dictionary[dictionaryPos] = previousByte;
+            if (++dictionaryPos == dictionarySize)
+              dictionaryPos = 0;
+            #else
+            previousByte = outStream[nowPos - rep0];
+            #endif
+            outStream[nowPos++] = previousByte;
+            continue;
+          }
+        }
+        else
+        {
+          UInt32 distance;
+          if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0)
+            distance = rep1;
+          else 
+          {
+            if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0)
+              distance = rep2;
+            else
+            {
+              distance = rep3;
+              rep3 = rep2;
+            }
+            rep2 = rep1;
+          }
+          rep1 = rep0;
+          rep0 = distance;
+        }
+        len = LzmaLenDecode(p + RepLenCoder, &rd, posState);
+        state = state < 7 ? 8 : 11;
+      }
+      else
+      {
+        int posSlot;
+        rep3 = rep2;
+        rep2 = rep1;
+        rep1 = rep0;
+        state = state < 7 ? 7 : 10;
+        len = LzmaLenDecode(p + LenCoder, &rd, posState);
+        posSlot = RangeDecoderBitTreeDecode(p + PosSlot +
+            ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << 
+            kNumPosSlotBits), kNumPosSlotBits, &rd);
+        if (posSlot >= kStartPosModelIndex)
+        {
+          int numDirectBits = ((posSlot >> 1) - 1);
+          rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits);
+          if (posSlot < kEndPosModelIndex)
+          {
+            rep0 += RangeDecoderReverseBitTreeDecode(
+                p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd);
+          }
+          else
+          {
+            rep0 += RangeDecoderDecodeDirectBits(&rd, 
+                numDirectBits - kNumAlignBits) << kNumAlignBits;
+            rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd);
+          }
+        }
+        else
+          rep0 = posSlot;
+        rep0++;
+      }
+      if (rep0 == (UInt32)(0))
+      {
+        /* it's for stream version */
+        len = -1;
+        break;
+      }
+      if (rep0 > nowPos 
+        #ifdef _LZMA_OUT_READ
+        + globalPos
+        #endif
+        )
+      {
+        return LZMA_RESULT_DATA_ERROR;
+      }
+      len += kMatchMinLen;
+      do
+      {
+        #ifdef _LZMA_OUT_READ
+        UInt32 pos = dictionaryPos - rep0;
+        if (pos >= dictionarySize)
+          pos += dictionarySize;
+        previousByte = dictionary[pos];
+        dictionary[dictionaryPos] = previousByte;
+        if (++dictionaryPos == dictionarySize)
+          dictionaryPos = 0;
+        #else
+        previousByte = outStream[nowPos - rep0];
+        #endif
+        outStream[nowPos++] = previousByte;
+        len--;
+      }
+      while(len > 0 && nowPos < outSize);
+    }
+  }
+
+  #ifdef _LZMA_OUT_READ
+  vs->RangeDecoder = rd;
+  vs->DictionaryPos = dictionaryPos;
+  vs->GlobalPos = globalPos + nowPos;
+  vs->Reps[0] = rep0;
+  vs->Reps[1] = rep1;
+  vs->Reps[2] = rep2;
+  vs->Reps[3] = rep3;
+  vs->State = state;
+  vs->PreviousIsMatch = previousIsMatch;
+  vs->RemainLen = len;
+  #endif
+
+  *outSizeProcessed = nowPos;
+  return LZMA_RESULT_OK;
+}
diff --git a/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.h b/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.h
new file mode 100644
index 0000000..f58944e
--- /dev/null
+++ b/target/linux/brcm47xx/image/lzma-loader/src/LzmaDecode.h
@@ -0,0 +1,100 @@
+/* 
+  LzmaDecode.h
+  LZMA Decoder interface
+
+  LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25)
+  http://www.7-zip.org/
+
+  LZMA SDK is licensed under two licenses:
+  1) GNU Lesser General Public License (GNU LGPL)
+  2) Common Public License (CPL)
+  It means that you can select one of these two licenses and 
+  follow rules of that license.
+
+  SPECIAL EXCEPTION:
+  Igor Pavlov, as the author of this code, expressly permits you to 
+  statically or dynamically link your code (or bind by name) to the 
+  interfaces of this file without subjecting your linked code to the 
+  terms of the CPL or GNU LGPL. Any modifications or additions 
+  to this file, however, are subject to the LGPL or CPL terms.
+*/
+
+#ifndef __LZMADECODE_H
+#define __LZMADECODE_H
+
+/* #define _LZMA_IN_CB */
+/* Use callback for input data */
+
+/* #define _LZMA_OUT_READ */
+/* Use read function for output data */
+
+/* #define _LZMA_PROB32 */
+/* It can increase speed on some 32-bit CPUs, 
+   but memory usage will be doubled in that case */
+
+/* #define _LZMA_LOC_OPT */
+/* Enable local speed optimizations inside code */
+
+#ifndef UInt32
+#ifdef _LZMA_UINT32_IS_ULONG
+#define UInt32 unsigned long
+#else
+#define UInt32 unsigned int
+#endif
+#endif
+
+#ifdef _LZMA_PROB32
+#define CProb UInt32
+#else
+#define CProb unsigned short
+#endif
+
+#define LZMA_RESULT_OK 0
+#define LZMA_RESULT_DATA_ERROR 1
+#define LZMA_RESULT_NOT_ENOUGH_MEM 2
+
+#ifdef _LZMA_IN_CB
+typedef struct _ILzmaInCallback
+{
+  int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize);
+} ILzmaInCallback;
+#endif
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+/* 
+bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb)
+bufferSize += 100 in case of _LZMA_OUT_READ
+by default CProb is unsigned short, 
+but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int)
+*/
+
+#ifdef _LZMA_OUT_READ
+int LzmaDecoderInit(
+    unsigned char *buffer, UInt32 bufferSize,
+    int lc, int lp, int pb,
+    unsigned char *dictionary, UInt32 dictionarySize,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback
+  #else
+    unsigned char *inStream, UInt32 inSize
+  #endif
+);
+#endif
+
+int LzmaDecode(
+    unsigned char *buffer, 
+  #ifndef _LZMA_OUT_READ
+    UInt32 bufferSize,
+    int lc, int lp, int pb,
+  #ifdef _LZMA_IN_CB
+    ILzmaInCallback *inCallback,
+  #else
+    unsigned char *inStream, UInt32 inSize,
+  #endif
+  #endif
+    unsigned char *outStream, UInt32 outSize,
+    UInt32 *outSizeProcessed);
+
+#endif
diff --git a/target/linux/brcm47xx/image/lzma-loader/src/Makefile b/target/linux/brcm47xx/image/lzma-loader/src/Makefile
new file mode 100644
index 0000000..3320e56
--- /dev/null
+++ b/target/linux/brcm47xx/image/lzma-loader/src/Makefile
@@ -0,0 +1,77 @@
+#
+# Makefile for Broadcom BCM947XX boards
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+# 
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# Copyright 2004  Manuel Novoa III <mjn3@codepoet.org>
+#   Modified to support bzip'd kernels.
+#   Of course, it would be better to integrate bunzip capability into CFE.
+#
+# Copyright 2005  Oleg I. Vdovikin <oleg@cs.msu.su>
+#   Cleaned up, modified for lzma support, removed from kernel
+#
+
+TEXT_START	:= 0x80001000
+BZ_TEXT_START	:= 0x80400000
+
+OBJCOPY		:= $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S
+
+CFLAGS		= -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
+		  -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \
+		  -ffunction-sections -pipe -mlong-calls -fno-common \
+		  -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap
+CFLAGS		+= -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB
+
+ASFLAGS		= $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START)
+
+SEDFLAGS	:= s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/
+
+OBJECTS		:= head.o data.o
+
+all: loader.gz loader.elf
+
+# Don't build dependencies, this may die if $(CC) isn't gcc
+dep:
+
+install:
+
+loader.gz: loader
+	gzip -nc9 $< > $@
+
+loader.elf: loader.o
+	cp $< $@
+
+loader: loader.o
+	$(OBJCOPY) $< $@
+
+loader.o: loader.lds $(OBJECTS)
+	$(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS)
+
+loader.lds: loader.lds.in Makefile
+	@sed "$(SEDFLAGS)" < $< > $@
+
+data.o: data.lds decompress.image
+	$(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips
+
+data.lds:
+	@echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@
+
+decompress.image: decompress
+	$(OBJCOPY) $< $@
+
+decompress: decompress.lds decompress.o LzmaDecode.o
+	$(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o
+
+decompress.lds: decompress.lds.in Makefile
+	@sed "$(SEDFLAGS)" < $< > $@
+
+mrproper: clean
+
+clean:
+	rm -f loader.gz loader decompress *.lds *.o *.image
diff --git a/target/linux/brcm47xx/image/lzma-loader/src/README b/target/linux/brcm47xx/image/lzma-loader/src/README
new file mode 100644
index 0000000..16649e9
--- /dev/null
+++ b/target/linux/brcm47xx/image/lzma-loader/src/README
@@ -0,0 +1,55 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+The code is intended to decompress kernel, being compressed using lzma utility
+build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory
+
+decompressor code expects that your .trx file consist of three partitions: 
+
+1) decompressor itself (this is gziped code which pmon/cfe will extract and run
+on boot-up instead of real kernel)
+2) LZMA compressed kernel (both streamed and regular modes are supported now)
+3) Root filesystem
+
+Please be sure to apply the following patch for use this new trx layout (it will
+allow using both new and old trx files for root filesystem lookup code)
+
+--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:24:27.503322896 +0300
++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c        2005-01-23 19:29:05.237100944 +0300
+@@ -221,7 +221,9 @@
+                /* Try looking at TRX header for rootfs offset */
+                if (le32_to_cpu(trx->magic) == TRX_MAGIC) {
+                        bcm947xx_parts[1].offset = off;
+-                       if (le32_to_cpu(trx->offsets[1]) > off)
++                       if (le32_to_cpu(trx->offsets[2]) > off)
++                               off = le32_to_cpu(trx->offsets[2]);
++                       else if (le32_to_cpu(trx->offsets[1]) > off)
+                                off = le32_to_cpu(trx->offsets[1]);
+                        continue;
+                }
+
+
+Revision history:
+	0.02	Initial release
+	0.03	Added Mineharu Takahara <mtakahar@yahoo.com> patch to pass actual
+		output size to decoder (stream mode compressed input is not 
+		a requirement anymore)
+	0.04	Reordered functions using lds script
diff --git a/target/linux/brcm47xx/image/lzma-loader/src/decompress.c b/target/linux/brcm47xx/image/lzma-loader/src/decompress.c
new file mode 100644
index 0000000..ce2876a
--- /dev/null
+++ b/target/linux/brcm47xx/image/lzma-loader/src/decompress.c
@@ -0,0 +1,179 @@
+/*
+ * LZMA compressed kernel decompressor for bcm947xx boards
+ *
+ * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Please note, this was code based on the bunzip2 decompressor code
+ * by Manuel Novoa III  (mjn3@codepoet.org), although the only thing left
+ * is an idea and part of original vendor code
+ *
+ *
+ * 12-Mar-2005  Mineharu Takahara <mtakahar@yahoo.com>
+ *   pass actual output size to decoder (stream mode
+ *   compressed input is not a requirement anymore)
+ *
+ * 24-Apr-2005 Oleg I. Vdovikin
+ *   reordered functions using lds script, removed forward decl
+ *
+ */
+
+#include "LzmaDecode.h"
+
+#define BCM4710_FLASH		0x1fc00000	/* Flash */
+
+#define KSEG0			0x80000000
+#define KSEG1			0xa0000000
+
+#define KSEG1ADDR(a)		((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+#define cache_unroll(base,op)	\
+	__asm__ __volatile__(		\
+		".set noreorder;\n"		\
+		".set mips3;\n"			\
+		"cache %1, (%0);\n"		\
+		".set mips0;\n"			\
+		".set reorder\n"		\
+		:						\
+		: "r" (base),			\
+		  "i" (op));
+
+static __inline__ void blast_icache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Invalidate_I);
+		start += lsize;
+	}
+}
+
+static __inline__ void blast_dcache(unsigned long size, unsigned long lsize)
+{
+	unsigned long start = KSEG0;
+	unsigned long end = (start + size);
+
+	while(start < end) {
+		cache_unroll(start,Index_Writeback_Inv_D);
+		start += lsize;
+	}
+}
+
+#define TRX_MAGIC       0x30524448      /* "HDR0" */
+
+struct trx_header {
+	unsigned int magic;		/* "HDR0" */
+	unsigned int len;		/* Length of file including header */
+	unsigned int crc32;		/* 32-bit CRC from flag_version to end of file */
+	unsigned int flag_version;	/* 0:15 flags, 16:31 version */
+	unsigned int offsets[3];	/* Offsets of partitions from start of header */
+};
+
+/* beyound the image end, size not known in advance */
+extern unsigned char workspace[];
+
+unsigned int offset;
+unsigned char *data;
+
+/* flash access should be aligned, so wrapper is used */
+/* read byte from the flash, all accesses are 32-bit aligned */
+static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize)
+{
+	static unsigned int val;
+
+	if (((unsigned int)offset % 4) == 0) {
+		val = *(unsigned int *)data;
+		data += 4;
+	}
+	
+	*bufferSize = 1;
+	*buffer = ((unsigned char *)&val) + (offset++ & 3);
+	
+	return LZMA_RESULT_OK;
+}
+
+static __inline__ unsigned char get_byte(void)
+{
+	unsigned char *buffer;
+	UInt32 fake;
+	
+	return read_byte(0, &buffer, &fake), *buffer;
+}
+
+/* should be the first function */
+void entry(unsigned long icache_size, unsigned long icache_lsize, 
+	unsigned long dcache_size, unsigned long dcache_lsize,
+	unsigned long fw_arg0, unsigned long fw_arg1,
+	unsigned long fw_arg2, unsigned long fw_arg3)
+{
+	unsigned int i;  /* temp value */
+	unsigned int lc; /* literal context bits */
+	unsigned int lp; /* literal pos state bits */
+	unsigned int pb; /* pos state bits */
+	unsigned int osize; /* uncompressed size */
+
+	ILzmaInCallback callback;
+	callback.Read = read_byte;
+
+	/* look for trx header, 32-bit data access */
+	for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH));
+		((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536);
+
+	/* compressed kernel is in the partition 0 or 1 */
+	if (((struct trx_header *)data)->offsets[1] > 65536) 
+		data += ((struct trx_header *)data)->offsets[0];
+	else
+		data += ((struct trx_header *)data)->offsets[1];
+
+	offset = 0;
+
+	/* lzma args */
+	i = get_byte();
+	lc = i % 9, i = i / 9;
+	lp = i % 5, pb = i / 5;
+
+	/* skip rest of the LZMA coder property */
+	for (i = 0; i < 4; i++)
+		get_byte();
+
+	/* read the lower half of uncompressed size in the header */
+	osize = ((unsigned int)get_byte()) +
+		((unsigned int)get_byte() << 8) +
+		((unsigned int)get_byte() << 16) +
+		((unsigned int)get_byte() << 24);
+
+	/* skip rest of the header (upper half of uncompressed size) */
+	for (i = 0; i < 4; i++) 
+		get_byte();
+
+	/* decompress kernel */
+	if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback,
+		(unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK)
+	{
+		blast_dcache(dcache_size, dcache_lsize);
+		blast_icache(icache_size, icache_lsize);
+
+		/* Jump to load address */
+		((void (*)(unsigned long, unsigned long, unsigned long,
+			unsigned long)) LOADADDR)(fw_arg0, fw_arg1, fw_arg2,
+				fw_arg3);
+	}
+}
diff --git a/target/linux/brcm47xx/image/lzma-loader/src/decompress.lds.in b/target/linux/brcm47xx/image/lzma-loader/src/decompress.lds.in
new file mode 100644
index 0000000..33f56f8
--- /dev/null
+++ b/target/linux/brcm47xx/image/lzma-loader/src/decompress.lds.in
@@ -0,0 +1,20 @@
+OUTPUT_ARCH(mips)
+ENTRY(entry)
+SECTIONS {
+	. = BZ_TEXT_START;
+	.text : {
+		*(.text.entry)
+		*(.text)
+		*(.rodata)
+	}
+
+	.data : {
+		*(.data)
+	}
+
+	.bss : {
+		*(.bss)
+	}
+
+	workspace = .;
+}
diff --git a/target/linux/brcm47xx/image/lzma-loader/src/head.S b/target/linux/brcm47xx/image/lzma-loader/src/head.S
new file mode 100644
index 0000000..3a33e40
--- /dev/null
+++ b/target/linux/brcm47xx/image/lzma-loader/src/head.S
@@ -0,0 +1,160 @@
+/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su)	*/
+/* cache manipulation adapted from Broadcom code 	*/
+/* idea taken from original bunzip2 decompressor code	*/
+/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org)	*/
+/* Licensed under the linux kernel's version of the GPL.*/
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#define KSEG0		0x80000000
+
+#define C0_CONFIG	$16
+#define C0_TAGLO	$28
+#define C0_TAGHI	$29
+
+#define	CONF1_DA_SHIFT	7			/* D$ associativity */
+#define CONF1_DA_MASK	0x00000380
+#define CONF1_DA_BASE	1
+#define CONF1_DL_SHIFT	10			/* D$ line size */
+#define CONF1_DL_MASK	0x00001c00
+#define CONF1_DL_BASE	2
+#define CONF1_DS_SHIFT	13			/* D$ sets/way */
+#define CONF1_DS_MASK	0x0000e000
+#define CONF1_DS_BASE	64
+#define CONF1_IA_SHIFT	16			/* I$ associativity */
+#define CONF1_IA_MASK	0x00070000
+#define CONF1_IA_BASE	1
+#define CONF1_IL_SHIFT	19			/* I$ line size */
+#define CONF1_IL_MASK	0x00380000
+#define CONF1_IL_BASE	2
+#define CONF1_IS_SHIFT	22			/* Instruction cache sets/way */
+#define CONF1_IS_MASK	0x01c00000
+#define CONF1_IS_BASE	64
+
+#define Index_Invalidate_I	0x00
+#define Index_Writeback_Inv_D   0x01
+
+	.text
+	LEAF(startup)
+	.set noreorder
+	addi    sp, -48 
+	sw      a0, 16(sp) 
+	sw      a1, 20(sp) 
+	sw      a2, 24(sp) 
+	sw      a3, 28(sp)
+	
+	/* Copy decompressor code to the right place */
+	li	t2, BZ_TEXT_START
+	add	a0, t2, 0
+	la      a1, code_start
+	la	a2, code_stop
+$L1:
+	lw	t0, 0(a1)
+	sw	t0, 0(a0)
+	add	a1, 4
+	add	a0, 4
+	blt	a1, a2, $L1
+	nop
+	
+	/* At this point we need to invalidate dcache and */
+	/* icache before jumping to new code */
+
+1:	/* Get cache sizes */
+	.set	mips32
+	mfc0	s0,C0_CONFIG,1
+	.set	mips0
+
+	li	s1,CONF1_DL_MASK
+	and	s1,s0
+	beq	s1,zero,nodc
+	nop
+
+	srl	s1,CONF1_DL_SHIFT
+	li	t0,CONF1_DL_BASE
+	sll	s1,t0,s1		/* s1 has D$ cache line size */
+
+	li	s2,CONF1_DA_MASK
+	and	s2,s0
+	srl	s2,CONF1_DA_SHIFT
+	addiu	s2,CONF1_DA_BASE	/* s2 now has D$ associativity */
+
+	li	t0,CONF1_DS_MASK
+	and	t0,s0
+	srl	t0,CONF1_DS_SHIFT
+	li	s3,CONF1_DS_BASE
+	sll	s3,s3,t0		/* s3 has D$ sets per way */
+
+	multu	s2,s3			/* sets/way * associativity */
+	mflo	t0			/* total cache lines */
+
+	multu	s1,t0			/* D$ linesize * lines */
+	mflo	s2			/* s2 is now D$ size in bytes */
+
+	/* Initilize the D$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s2		/*  + size of cache == end */
+
+	.set	mips3
+1:	cache	Index_Writeback_Inv_D,0(t0)
+	.set	mips0
+	bne	t0,t1,1b
+	addu	t0,s1
+	
+nodc:
+	/* Now we get to do it all again for the I$ */
+	
+	move	s3,zero			/* just in case there is no icache */
+	move	s4,zero
+
+	li	t0,CONF1_IL_MASK
+	and	t0,s0
+	beq	t0,zero,noic
+	nop
+
+	srl	t0,CONF1_IL_SHIFT
+	li	s3,CONF1_IL_BASE
+	sll	s3,t0			/* s3 has I$ cache line size */
+
+	li	t0,CONF1_IA_MASK
+	and	t0,s0
+	srl	t0,CONF1_IA_SHIFT
+	addiu	s4,t0,CONF1_IA_BASE	/* s4 now has I$ associativity */
+
+	li	t0,CONF1_IS_MASK
+	and	t0,s0
+	srl	t0,CONF1_IS_SHIFT
+	li	s5,CONF1_IS_BASE
+	sll	s5,t0			/* s5 has I$ sets per way */
+
+	multu	s4,s5			/* sets/way * associativity */
+	mflo	t0			/* s4 is now total cache lines */
+
+	multu	s3,t0			/* I$ linesize * lines */
+	mflo	s4			/* s4 is cache size in bytes */
+
+	/* Initilize the I$: */
+	mtc0	zero,C0_TAGLO
+	mtc0	zero,C0_TAGHI
+
+	li	t0,KSEG0		/* Just an address for the first $ line */
+	addu	t1,t0,s4		/*  + size of cache == end */
+
+	.set	mips3
+1:	cache	Index_Invalidate_I,0(t0)
+	.set	mips0
+	bne	t0,t1,1b
+	addu	t0,s3
+
+noic:
+	move	a0,s3			/* icache line size */
+	move	a1,s4			/* icache size */
+	move	a2,s1			/* dcache line size */
+	jal	t2
+	move	a3,s2			/* dcache size */
+	
+	.set reorder
+	END(startup)
diff --git a/target/linux/brcm47xx/image/lzma-loader/src/loader.lds.in b/target/linux/brcm47xx/image/lzma-loader/src/loader.lds.in
new file mode 100644
index 0000000..20f2ea9
--- /dev/null
+++ b/target/linux/brcm47xx/image/lzma-loader/src/loader.lds.in
@@ -0,0 +1,17 @@
+OUTPUT_ARCH(mips)
+ENTRY(startup)
+SECTIONS {
+	. = TEXT_START;
+	.text : {
+		*(.text)
+		*(.rodata)
+	}
+
+	.data : {
+		*(.data)
+	}
+
+	.bss : {
+		*(.bss)
+	}
+}