brcm47xx: add initial support for kernel 3.8

This contains the following new bigger changes:
 * new partition parser which still could lake some features or have bugs
 * new nand flash driver
 * using physmap-flash flash driver for parallel flash
 * some changes to the serial flash driver

With these changes OpenWrt starts using more of the mainline flash drivers.

SVN-Revision: 35632

54 files changed, 7785 insertions, 0 deletions

diff --git a/target/linux/brcm47xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/brcm47xx/base-files/etc/uci-defaults/09_fix_crc
new file mode 100644
index 0000000..981d114
--- /dev/null
+++ b/target/linux/brcm47xx/base-files/etc/uci-defaults/09_fix_crc
@@ -0,0 +1,14 @@
+#!/bin/sh
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+#
+
+do_fixcrc() {
+	mtd fixtrx firmware
+}
+
+case `uname -r` in
+	3.8* | 3.9* ) do_fixcrc;;
+esac
+
diff --git a/target/linux/brcm47xx/config-3.8 b/target/linux/brcm47xx/config-3.8
new file mode 100644
index 0000000..177c271
--- /dev/null
+++ b/target/linux/brcm47xx/config-3.8
@@ -0,0 +1,156 @@
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_ARPD is not set
+CONFIG_BCM47XX=y
+CONFIG_BCM47XX_BCMA=y
+CONFIG_BCM47XX_SSB=y
+CONFIG_BCM47XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_DEBUG=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
+CONFIG_BCMA_DRIVER_MIPS=y
+CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BCMA_NFLASH=y
+CONFIG_BCMA_SFLASH=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+CONFIG_CPU_MIPSR1=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CSRC_R4K=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_FW_CFE=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_HARDIRQS=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_WORK=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIPS=y
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_SEAD3 is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_BCM47XXSFLASH=y
+CONFIG_MTD_BCM47XX_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BCM47XXNFLASH=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_SM_COMMON is not set
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NO_EXCEPT_FILL=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PERCPU_RWSEM=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_RSA is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+CONFIG_SSB_BLOCKIO=y
+CONFIG_SSB_DEBUG=y
+CONFIG_SSB_DRIVER_EXTIF=y
+CONFIG_SSB_DRIVER_GIGE=y
+CONFIG_SSB_DRIVER_GPIO=y
+CONFIG_SSB_DRIVER_MIPS=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_EMBEDDED=y
+CONFIG_SSB_PCICORE_HOSTMODE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SERIAL=y
+CONFIG_SSB_SFLASH=y
+CONFIG_SSB_SPROM=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_UIDGID_CONVERTED=y
+CONFIG_USB_ARCH_HAS_XHCI=y
+# CONFIG_USB_HCD_BCMA is not set
+# CONFIG_USB_HCD_SSB is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm47xx/patches-3.8/020-mtd-bcm47xxpart-simplify-size-calculation-to-one-loo.patch b/target/linux/brcm47xx/patches-3.8/020-mtd-bcm47xxpart-simplify-size-calculation-to-one-loo.patch
new file mode 100644
index 0000000..88771d9
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/020-mtd-bcm47xxpart-simplify-size-calculation-to-one-loo.patch
@@ -0,0 +1,20 @@
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -169,11 +169,12 @@ static int bcm47xxpart_parse(struct mtd_
+ 	 * Assume that partitions end at the beginning of the one they are
+ 	 * followed by.
+ 	 */
+-	for (i = 0; i < curr_part - 1; i++)
+-		parts[i].size = parts[i + 1].offset - parts[i].offset;
+-	if (curr_part > 0)
+-		parts[curr_part - 1].size =
+-				master->size - parts[curr_part - 1].offset;
++	for (i = 0; i < curr_part; i++) {
++		u64 next_part_offset = (i < curr_part - 1) ?
++				       parts[i + 1].offset : master->size;
++
++		parts[i].size = next_part_offset - parts[i].offset;
++	}
+ 
+ 	*pparts = parts;
+ 	return curr_part;
diff --git a/target/linux/brcm47xx/patches-3.8/021-mtd-bcm47xxpart-register-extra-firmware-partition.patch b/target/linux/brcm47xx/patches-3.8/021-mtd-bcm47xxpart-register-extra-firmware-partition.patch
new file mode 100644
index 0000000..c5399f2
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/021-mtd-bcm47xxpart-register-extra-firmware-partition.patch
@@ -0,0 +1,41 @@
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -61,6 +61,8 @@ static int bcm47xxpart_parse(struct mtd_
+ 	uint32_t offset;
+ 	uint32_t blocksize = 0x10000;
+ 	struct trx_header *trx;
++	int trx_part = -1;
++	int last_trx_part = -1;
+ 
+ 	/* Alloc */
+ 	parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
+@@ -131,6 +133,10 @@ static int bcm47xxpart_parse(struct mtd_
+ 		if (buf[0x000 / 4] == TRX_MAGIC) {
+ 			trx = (struct trx_header *)buf;
+ 
++			trx_part = curr_part;
++			bcm47xxpart_add_part(&parts[curr_part++], "firmware",
++					     offset, 0);
++
+ 			i = 0;
+ 			/* We have LZMA loader if offset[2] points to sth */
+ 			if (trx->offset[2]) {
+@@ -154,6 +160,8 @@ static int bcm47xxpart_parse(struct mtd_
+ 					     offset + trx->offset[i], 0);
+ 			i++;
+ 
++			last_trx_part = curr_part - 1;
++
+ 			/*
+ 			 * We have whole TRX scanned, skip to the next part. Use
+ 			 * roundown (not roundup), as the loop will increase
+@@ -174,6 +182,9 @@ static int bcm47xxpart_parse(struct mtd_
+ 				       parts[i + 1].offset : master->size;
+ 
+ 		parts[i].size = next_part_offset - parts[i].offset;
++		if (i == last_trx_part && trx_part >= 0)
++			parts[trx_part].size = next_part_offset -
++					       parts[trx_part].offset;
+ 	}
+ 
+ 	*pparts = parts;
diff --git a/target/linux/brcm47xx/patches-3.8/022-mtd-bcm47xxpart-add-support-for-other-erase-sizes.patch b/target/linux/brcm47xx/patches-3.8/022-mtd-bcm47xxpart-add-support-for-other-erase-sizes.patch
new file mode 100644
index 0000000..4a89de1
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/022-mtd-bcm47xxpart-add-support-for-other-erase-sizes.patch
@@ -0,0 +1,18 @@
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -59,11 +59,14 @@ static int bcm47xxpart_parse(struct mtd_
+ 	uint32_t *buf;
+ 	size_t bytes_read;
+ 	uint32_t offset;
+-	uint32_t blocksize = 0x10000;
++	uint32_t blocksize = master->erasesize;
+ 	struct trx_header *trx;
+ 	int trx_part = -1;
+ 	int last_trx_part = -1;
+ 
++	if (blocksize <= 0x10000)
++		blocksize = 0x10000;
++
+ 	/* Alloc */
+ 	parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
+ 			GFP_KERNEL);
diff --git a/target/linux/brcm47xx/patches-3.8/023-mtd-bcm47xxpart-improve-probing-of-nvram-partition.patch b/target/linux/brcm47xx/patches-3.8/023-mtd-bcm47xxpart-improve-probing-of-nvram-partition.patch
new file mode 100644
index 0000000..b111532
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/023-mtd-bcm47xxpart-improve-probing-of-nvram-partition.patch
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -19,12 +19,6 @@
+ /* 10 parts were found on sflash on Netgear WNDR4500 */
+ #define BCM47XXPART_MAX_PARTS		12
+ 
+-/*
+- * Amount of bytes we read when analyzing each block of flash memory.
+- * Set it big enough to allow detecting partition and reading important data.
+- */
+-#define BCM47XXPART_BYTES_TO_READ	0x404
+-
+ /* Magics */
+ #define BOARD_DATA_MAGIC		0x5246504D	/* MPFR */
+ #define POT_MAGIC1			0x54544f50	/* POTT */
+@@ -63,14 +57,17 @@ static int bcm47xxpart_parse(struct mtd_
+ 	struct trx_header *trx;
+ 	int trx_part = -1;
+ 	int last_trx_part = -1;
++	int max_bytes_to_read = 0x8004;
+ 
+ 	if (blocksize <= 0x10000)
+ 		blocksize = 0x10000;
++	if (blocksize == 0x20000)
++		max_bytes_to_read = 0x18004;
+ 
+ 	/* Alloc */
+ 	parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
+ 			GFP_KERNEL);
+-	buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
++	buf = kzalloc(max_bytes_to_read, GFP_KERNEL);
+ 
+ 	/* Parse block by block looking for magics */
+ 	for (offset = 0; offset <= master->size - blocksize;
+@@ -85,7 +82,7 @@ static int bcm47xxpart_parse(struct mtd_
+ 		}
+ 
+ 		/* Read beginning of the block */
+-		if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
++		if (mtd_read(master, offset, max_bytes_to_read,
+ 			     &bytes_read, (uint8_t *)buf) < 0) {
+ 			pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
+ 			       offset);
+@@ -100,9 +97,16 @@ static int bcm47xxpart_parse(struct mtd_
+ 		}
+ 
+ 		/* Standard NVRAM */
+-		if (buf[0x000 / 4] == NVRAM_HEADER) {
++		if (buf[0x000 / 4] == NVRAM_HEADER ||
++		    buf[0x1000 / 4] == NVRAM_HEADER ||
++		    buf[0x8000 / 4] == NVRAM_HEADER ||
++		    (blocksize == 0x20000 && (
++		      buf[0x10000 / 4] == NVRAM_HEADER ||
++		      buf[0x11000 / 4] == NVRAM_HEADER ||
++		      buf[0x18000 / 4] == NVRAM_HEADER))) {
+ 			bcm47xxpart_add_part(&parts[curr_part++], "nvram",
+ 					     offset, 0);
++			offset = rounddown(offset, blocksize);
+ 			continue;
+ 		}
+ 
diff --git a/target/linux/brcm47xx/patches-3.8/024-mtd-bcm47xxpart-get-nvram.patch b/target/linux/brcm47xx/patches-3.8/024-mtd-bcm47xxpart-get-nvram.patch
new file mode 100644
index 0000000..9932665
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/024-mtd-bcm47xxpart-get-nvram.patch
@@ -0,0 +1,34 @@
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -58,6 +58,7 @@ static int bcm47xxpart_parse(struct mtd_
+ 	int trx_part = -1;
+ 	int last_trx_part = -1;
+ 	int max_bytes_to_read = 0x8004;
++	bool found_nvram = false;
+ 
+ 	if (blocksize <= 0x10000)
+ 		blocksize = 0x10000;
+@@ -107,6 +108,7 @@ static int bcm47xxpart_parse(struct mtd_
+ 			bcm47xxpart_add_part(&parts[curr_part++], "nvram",
+ 					     offset, 0);
+ 			offset = rounddown(offset, blocksize);
++			found_nvram = true;
+ 			continue;
+ 		}
+ 
+@@ -194,6 +196,15 @@ static int bcm47xxpart_parse(struct mtd_
+ 					       parts[trx_part].offset;
+ 	}
+ 
++	if (!found_nvram) {
++		pr_err("can not find a nvram partition reserve last block\n");
++		bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
++				     master->size - blocksize, MTD_WRITEABLE);
++		for (i = 0; i < curr_part; i++) {
++			if (parts[i].size + parts[i].offset == master->size)
++				parts[i].offset -= blocksize;
++		}
++	}
+ 	*pparts = parts;
+ 	return curr_part;
+ };
diff --git a/target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch b/target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch
new file mode 100644
index 0000000..30bdbb2
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/030-mtd-bcm47xxsflash-add-own-struct-for-abstrating-bus-.patch
@@ -0,0 +1,123 @@
+--- a/drivers/mtd/devices/bcm47xxsflash.c
++++ b/drivers/mtd/devices/bcm47xxsflash.c
+@@ -5,6 +5,8 @@
+ #include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+ 
++#include "bcm47xxsflash.h"
++
+ MODULE_LICENSE("GPL");
+ MODULE_DESCRIPTION("Serial flash driver for BCMA bus");
+ 
+@@ -13,26 +15,27 @@ static const char *probes[] = { "bcm47xx
+ static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
+ 			      size_t *retlen, u_char *buf)
+ {
+-	struct bcma_sflash *sflash = mtd->priv;
++	struct bcm47xxsflash *b47s = mtd->priv;
+ 
+ 	/* Check address range */
+ 	if ((from + len) > mtd->size)
+ 		return -EINVAL;
+ 
+-	memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(sflash->window + from),
++	memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from),
+ 		      len);
+ 
+ 	return len;
+ }
+ 
+-static void bcm47xxsflash_fill_mtd(struct bcma_sflash *sflash,
+-				   struct mtd_info *mtd)
++static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s)
+ {
+-	mtd->priv = sflash;
++	struct mtd_info *mtd = &b47s->mtd;
++
++	mtd->priv = b47s;
+ 	mtd->name = "bcm47xxsflash";
+ 	mtd->owner = THIS_MODULE;
+ 	mtd->type = MTD_ROM;
+-	mtd->size = sflash->size;
++	mtd->size = b47s->size;
+ 	mtd->_read = bcm47xxsflash_read;
+ 
+ 	/* TODO: implement writing support and verify/change following code */
+@@ -43,16 +46,23 @@ static void bcm47xxsflash_fill_mtd(struc
+ static int bcm47xxsflash_probe(struct platform_device *pdev)
+ {
+ 	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
++	struct bcm47xxsflash *b47s;
+ 	int err;
+ 
+-	sflash->mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+-	if (!sflash->mtd) {
++	b47s = kzalloc(sizeof(*b47s), GFP_KERNEL);
++	if (!b47s) {
+ 		err = -ENOMEM;
+ 		goto out;
+ 	}
+-	bcm47xxsflash_fill_mtd(sflash, sflash->mtd);
++	sflash->priv = b47s;
++
++	b47s->window = sflash->window;
++	b47s->blocksize = sflash->blocksize;
++	b47s->numblocks = sflash->numblocks;
++	b47s->size = sflash->size;
++	bcm47xxsflash_fill_mtd(b47s);
+ 
+-	err = mtd_device_parse_register(sflash->mtd, probes, NULL, NULL, 0);
++	err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
+ 	if (err) {
+ 		pr_err("Failed to register MTD device: %d\n", err);
+ 		goto err_dev_reg;
+@@ -61,7 +71,7 @@ static int bcm47xxsflash_probe(struct pl
+ 	return 0;
+ 
+ err_dev_reg:
+-	kfree(sflash->mtd);
++	kfree(&b47s->mtd);
+ out:
+ 	return err;
+ }
+@@ -69,9 +79,10 @@ out:
+ static int bcm47xxsflash_remove(struct platform_device *pdev)
+ {
+ 	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
++	struct bcm47xxsflash *b47s = sflash->priv;
+ 
+-	mtd_device_unregister(sflash->mtd);
+-	kfree(sflash->mtd);
++	mtd_device_unregister(&b47s->mtd);
++	kfree(b47s);
+ 
+ 	return 0;
+ }
+--- /dev/null
++++ b/drivers/mtd/devices/bcm47xxsflash.h
+@@ -0,0 +1,15 @@
++#ifndef __BCM47XXSFLASH_H
++#define __BCM47XXSFLASH_H
++
++#include <linux/mtd/mtd.h>
++
++struct bcm47xxsflash {
++	u32 window;
++	u32 blocksize;
++	u16 numblocks;
++	u32 size;
++
++	struct mtd_info mtd;
++};
++
++#endif /* BCM47XXSFLASH */
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -528,6 +528,7 @@ struct bcma_sflash {
+ 	u32 size;
+ 
+ 	struct mtd_info *mtd;
++	void *priv;
+ };
+ #endif
+ 
diff --git a/target/linux/brcm47xx/patches-3.8/031-mtd-bcm47xxsflash-write-number-of-written-bytes.patch b/target/linux/brcm47xx/patches-3.8/031-mtd-bcm47xxsflash-write-number-of-written-bytes.patch
new file mode 100644
index 0000000..9c41cad
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/031-mtd-bcm47xxsflash-write-number-of-written-bytes.patch
@@ -0,0 +1,10 @@
+--- a/drivers/mtd/devices/bcm47xxsflash.c
++++ b/drivers/mtd/devices/bcm47xxsflash.c
+@@ -23,6 +23,7 @@ static int bcm47xxsflash_read(struct mtd
+ 
+ 	memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from),
+ 		      len);
++	*retlen = len;
+ 
+ 	return len;
+ }
diff --git a/target/linux/brcm47xx/patches-3.8/032-mtd-bcm47xxsflash-register-this-as-normal-driver.patch b/target/linux/brcm47xx/patches-3.8/032-mtd-bcm47xxsflash-register-this-as-normal-driver.patch
new file mode 100644
index 0000000..2d30e8f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/032-mtd-bcm47xxsflash-register-this-as-normal-driver.patch
@@ -0,0 +1,19 @@
+--- a/drivers/mtd/devices/bcm47xxsflash.c
++++ b/drivers/mtd/devices/bcm47xxsflash.c
+@@ -89,6 +89,7 @@ static int bcm47xxsflash_remove(struct p
+ }
+ 
+ static struct platform_driver bcma_sflash_driver = {
++	.probe	= bcm47xxsflash_probe,
+ 	.remove = bcm47xxsflash_remove,
+ 	.driver = {
+ 		.name = "bcma_sflash",
+@@ -100,7 +101,7 @@ static int __init bcm47xxsflash_init(voi
+ {
+ 	int err;
+ 
+-	err = platform_driver_probe(&bcma_sflash_driver, bcm47xxsflash_probe);
++	err = platform_driver_register(&bcma_sflash_driver);
+ 	if (err)
+ 		pr_err("Failed to register BCMA serial flash driver: %d\n",
+ 		       err);
diff --git a/target/linux/brcm47xx/patches-3.8/033-mtd-bcm47xxsflash-adjust-names-of-bus-specific-funct.patch b/target/linux/brcm47xx/patches-3.8/033-mtd-bcm47xxsflash-adjust-names-of-bus-specific-funct.patch
new file mode 100644
index 0000000..bf61285
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/033-mtd-bcm47xxsflash-adjust-names-of-bus-specific-funct.patch
@@ -0,0 +1,45 @@
+--- a/drivers/mtd/devices/bcm47xxsflash.c
++++ b/drivers/mtd/devices/bcm47xxsflash.c
+@@ -44,7 +44,11 @@ static void bcm47xxsflash_fill_mtd(struc
+ 	mtd->writebufsize = mtd->writesize = 1;
+ }
+ 
+-static int bcm47xxsflash_probe(struct platform_device *pdev)
++/**************************************************
++ * BCMA
++ **************************************************/
++
++static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
+ {
+ 	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+ 	struct bcm47xxsflash *b47s;
+@@ -77,7 +81,7 @@ out:
+ 	return err;
+ }
+ 
+-static int bcm47xxsflash_remove(struct platform_device *pdev)
++static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
+ {
+ 	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+ 	struct bcm47xxsflash *b47s = sflash->priv;
+@@ -89,14 +93,18 @@ static int bcm47xxsflash_remove(struct p
+ }
+ 
+ static struct platform_driver bcma_sflash_driver = {
+-	.probe	= bcm47xxsflash_probe,
+-	.remove = bcm47xxsflash_remove,
++	.probe	= bcm47xxsflash_bcma_probe,
++	.remove = bcm47xxsflash_bcma_remove,
+ 	.driver = {
+ 		.name = "bcma_sflash",
+ 		.owner = THIS_MODULE,
+ 	},
+ };
+ 
++/**************************************************
++ * Init
++ **************************************************/
++
+ static int __init bcm47xxsflash_init(void)
+ {
+ 	int err;
diff --git a/target/linux/brcm47xx/patches-3.8/041-mtd-bcm47xxnflash-fix-message.patch b/target/linux/brcm47xx/patches-3.8/041-mtd-bcm47xxnflash-fix-message.patch
new file mode 100644
index 0000000..faefac0
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/041-mtd-bcm47xxnflash-fix-message.patch
@@ -0,0 +1,12 @@
+--- a/drivers/mtd/nand/bcm47xxnflash/main.c
++++ b/drivers/mtd/nand/bcm47xxnflash/main.c
+@@ -94,7 +94,8 @@ static int __init bcm47xxnflash_init(voi
+ 	 */
+ 	err = platform_driver_probe(&bcm47xxnflash_driver, bcm47xxnflash_probe);
+ 	if (err)
+-		pr_err("Failed to register serial flash driver: %d\n", err);
++		pr_err("Failed to register bcm47xx nand flash driver: %d\n",
++		       err);
+ 
+ 	return err;
+ }
diff --git a/target/linux/brcm47xx/patches-3.8/042-mtd-bcm47xxnflash-register-this-as-normal-driver.patch b/target/linux/brcm47xx/patches-3.8/042-mtd-bcm47xxnflash-register-this-as-normal-driver.patch
new file mode 100644
index 0000000..5caa2cc
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/042-mtd-bcm47xxnflash-register-this-as-normal-driver.patch
@@ -0,0 +1,23 @@
+--- a/drivers/mtd/nand/bcm47xxnflash/main.c
++++ b/drivers/mtd/nand/bcm47xxnflash/main.c
+@@ -77,6 +77,7 @@ static int bcm47xxnflash_remove(struct p
+ }
+ 
+ static struct platform_driver bcm47xxnflash_driver = {
++	.probe	= bcm47xxnflash_probe,
+ 	.remove = bcm47xxnflash_remove,
+ 	.driver = {
+ 		.name = "bcma_nflash",
+@@ -88,11 +89,7 @@ static int __init bcm47xxnflash_init(voi
+ {
+ 	int err;
+ 
+-	/*
+-	 * Platform device "bcma_nflash" exists on SoCs and is registered very
+-	 * early, it won't be added during runtime (use platform_driver_probe).
+-	 */
+-	err = platform_driver_probe(&bcm47xxnflash_driver, bcm47xxnflash_probe);
++	err = platform_driver_register(&bcm47xxnflash_driver);
+ 	if (err)
+ 		pr_err("Failed to register bcm47xx nand flash driver: %d\n",
+ 		       err);
diff --git a/target/linux/brcm47xx/patches-3.8/043-mtd-bcm47xxnflash-use-pr_fmt-for-module-prefix-in-me.patch b/target/linux/brcm47xx/patches-3.8/043-mtd-bcm47xxnflash-use-pr_fmt-for-module-prefix-in-me.patch
new file mode 100644
index 0000000..2333454
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/043-mtd-bcm47xxnflash-use-pr_fmt-for-module-prefix-in-me.patch
@@ -0,0 +1,50 @@
+--- a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
++++ b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
+@@ -1,6 +1,10 @@
+ #ifndef __BCM47XXNFLASH_H
+ #define __BCM47XXNFLASH_H
+ 
++#ifndef pr_fmt
++#define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
++#endif
++
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/nand.h>
+ 
+--- a/drivers/mtd/nand/bcm47xxnflash/main.c
++++ b/drivers/mtd/nand/bcm47xxnflash/main.c
+@@ -9,14 +9,14 @@
+  *
+  */
+ 
++#include "bcm47xxnflash.h"
++
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+ #include <linux/slab.h>
+ #include <linux/platform_device.h>
+ #include <linux/bcma/bcma.h>
+ 
+-#include "bcm47xxnflash.h"
+-
+ MODULE_DESCRIPTION("NAND flash driver for BCMA bus");
+ MODULE_LICENSE("GPL");
+ MODULE_AUTHOR("Rafał Miłecki");
+--- a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
++++ b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
+@@ -9,13 +9,13 @@
+  *
+  */
+ 
++#include "bcm47xxnflash.h"
++
+ #include <linux/module.h>
+ #include <linux/kernel.h>
+ #include <linux/slab.h>
+ #include <linux/bcma/bcma.h>
+ 
+-#include "bcm47xxnflash.h"
+-
+ /* Broadcom uses 1'000'000 but it seems to be too many. Tests on WNDR4500 has
+  * shown ~1000 retries as maxiumum. */
+ #define NFLASH_READY_RETRIES		10000
diff --git a/target/linux/brcm47xx/patches-3.8/052-mtd-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.8/052-mtd-add-serial-flash-driver.patch
new file mode 100644
index 0000000..844f89d
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/052-mtd-add-serial-flash-driver.patch
@@ -0,0 +1,345 @@
+--- a/drivers/mtd/devices/bcm47xxsflash.c
++++ b/drivers/mtd/devices/bcm47xxsflash.c
+@@ -1,47 +1,153 @@
+-#include <linux/kernel.h>
++/*
++ * Broadcom SiliconBackplane chipcommon serial flash interface
++ *
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ * Copyright 2006, Broadcom Corporation
++ * All Rights Reserved.
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#define pr_fmt(fmt) "bcm47xxsflash: " fmt
+ #include <linux/module.h>
+ #include <linux/slab.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
+ #include <linux/mtd/mtd.h>
++#include <linux/mtd/map.h>
++#include <linux/mtd/partitions.h>
++#include <linux/errno.h>
++#include <linux/delay.h>
+ #include <linux/platform_device.h>
+-#include <linux/bcma/bcma.h>
+-
+-#include "bcm47xxsflash.h"
++#include <linux/mtd/bcm47xxsflash.h>
+ 
+ MODULE_LICENSE("GPL");
+-MODULE_DESCRIPTION("Serial flash driver for BCMA bus");
++MODULE_DESCRIPTION("BCM47XX serial flash driver");
+ 
+ static const char *probes[] = { "bcm47xxpart", NULL };
+ 
++static int
++sflash_mtd_poll(struct bcm47xxsflash *sflash, unsigned int offset, int timeout)
++{
++	unsigned long now = jiffies;
++
++	for (;;) {
++		if (!sflash->poll(sflash, offset)) {
++			break;
++		}
++		if (time_after(jiffies, now + timeout)) {
++			pr_err("timeout while polling\n");
++			return -ETIMEDOUT;
++
++		}
++		cpu_relax();
++		udelay(1);
++	}
++
++	return 0;
++}
++
+ static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len,
+ 			      size_t *retlen, u_char *buf)
+ {
+-	struct bcm47xxsflash *b47s = mtd->priv;
++	struct bcm47xxsflash *sflash = (struct bcm47xxsflash *)mtd->priv;
+ 
+ 	/* Check address range */
++	if (!len)
++		return 0;
++
+ 	if ((from + len) > mtd->size)
+ 		return -EINVAL;
+ 
+-	memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(b47s->window + from),
++	memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(sflash->window + from),
+ 		      len);
+ 	*retlen = len;
+ 
+ 	return len;
+ }
+ 
+-static void bcm47xxsflash_fill_mtd(struct bcm47xxsflash *b47s)
++static int
++sflash_mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
+ {
+-	struct mtd_info *mtd = &b47s->mtd;
++	int bytes;
++	int ret;
++	struct bcm47xxsflash *sflash = (struct bcm47xxsflash *)mtd->priv;
+ 
+-	mtd->priv = b47s;
+-	mtd->name = "bcm47xxsflash";
+-	mtd->owner = THIS_MODULE;
+-	mtd->type = MTD_ROM;
+-	mtd->size = b47s->size;
+-	mtd->_read = bcm47xxsflash_read;
++	/* Check address range */
++	if (!len)
++		return 0;
++
++	if ((to + len) > mtd->size)
++		return -EINVAL;
++
++	*retlen = 0;
++	while (len) {
++		ret = sflash->write(sflash, to, len, buf);
++		if (ret < 0)
++			return ret;
++
++		bytes = ret;
++
++		ret = sflash_mtd_poll(sflash, (unsigned int) to, HZ / 10);
++		if (ret)
++			return ret;
++
++		to += (loff_t) bytes;
++		len -= bytes;
++		buf += bytes;
++		*retlen += bytes;
++	}
+ 
+-	/* TODO: implement writing support and verify/change following code */
+-	mtd->flags = MTD_CAP_ROM;
+-	mtd->writebufsize = mtd->writesize = 1;
++	return 0;
++}
++
++static int
++sflash_mtd_erase(struct mtd_info *mtd, struct erase_info *erase)
++{
++	struct bcm47xxsflash *sflash = (struct bcm47xxsflash *) mtd->priv;
++	int i, j, ret = 0;
++	unsigned int addr, len;
++
++	/* Check address range */
++	if (!erase->len)
++		return 0;
++	if ((erase->addr + erase->len) > mtd->size)
++		return -EINVAL;
++
++	addr = erase->addr;
++	len = erase->len;
++
++	/* Ensure that requested regions are aligned */
++	for (i = 0; i < mtd->numeraseregions; i++) {
++		for (j = 0; j < mtd->eraseregions[i].numblocks; j++) {
++			if (addr == mtd->eraseregions[i].offset +
++					mtd->eraseregions[i].erasesize * j &&
++			    len >= mtd->eraseregions[i].erasesize) {
++				ret = sflash->erase(sflash, addr);
++				if (ret < 0)
++					break;
++				ret = sflash_mtd_poll(sflash, addr, 10 * HZ);
++				if (ret)
++					break;
++				addr += mtd->eraseregions[i].erasesize;
++				len -= mtd->eraseregions[i].erasesize;
++			}
++		}
++		if (ret)
++			break;
++	}
++
++	/* Set erase status */
++	if (ret)
++		erase->state = MTD_ERASE_FAILED;
++	else
++		erase->state = MTD_ERASE_DONE;
++
++	/* Call erase callback */
++	if (erase->callback)
++		erase->callback(erase);
++
++	return ret;
+ }
+ 
+ /**************************************************
+@@ -50,53 +156,94 @@ static void bcm47xxsflash_fill_mtd(struc
+ 
+ static int bcm47xxsflash_bcma_probe(struct platform_device *pdev)
+ {
+-	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+-	struct bcm47xxsflash *b47s;
+-	int err;
++	struct bcm47xxsflash *sflash = dev_get_platdata(&pdev->dev);
++	struct mtd_info *mtd;
++	struct mtd_erase_region_info *eraseregions;
++	int ret = 0;
++
++	mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
++	if (!mtd){
++		ret =  -ENOMEM;
++		goto err_out;
++	}
+ 
+-	b47s = kzalloc(sizeof(*b47s), GFP_KERNEL);
+-	if (!b47s) {
+-		err = -ENOMEM;
+-		goto out;
+-	}
+-	sflash->priv = b47s;
+-
+-	b47s->window = sflash->window;
+-	b47s->blocksize = sflash->blocksize;
+-	b47s->numblocks = sflash->numblocks;
+-	b47s->size = sflash->size;
+-	bcm47xxsflash_fill_mtd(b47s);
+-
+-	err = mtd_device_parse_register(&b47s->mtd, probes, NULL, NULL, 0);
+-	if (err) {
+-		pr_err("Failed to register MTD device: %d\n", err);
+-		goto err_dev_reg;
++	eraseregions = kzalloc(sizeof(struct mtd_erase_region_info), GFP_KERNEL);
++	if (!eraseregions) {
++		ret =  -ENOMEM;
++		goto err_free_mtd;
+ 	}
+ 
++	pr_info("found serial flash: blocksize=%dKB, numblocks=%d, size=%dKB\n",
++		sflash->blocksize / 1024, sflash->numblocks, sflash->size / 1024);
++
++	/* Setup region info */
++	eraseregions->offset = 0;
++	eraseregions->erasesize = sflash->blocksize;
++	eraseregions->numblocks = sflash->numblocks;
++	if (eraseregions->erasesize > mtd->erasesize)
++		mtd->erasesize = eraseregions->erasesize;
++	mtd->size = sflash->size;
++	mtd->numeraseregions = 1;
++
++	/* Register with MTD */
++	mtd->name = "bcm47xx-sflash";
++	mtd->type = MTD_NORFLASH;
++	mtd->flags = MTD_CAP_NORFLASH;
++	mtd->eraseregions = eraseregions;
++	mtd->_erase = sflash_mtd_erase;
++	mtd->_read = bcm47xxsflash_read;
++	mtd->_write = sflash_mtd_write;
++	mtd->writesize = 1;
++	mtd->priv = sflash;
++	ret = dev_set_drvdata(&pdev->dev, mtd);
++	mtd->owner = THIS_MODULE;
++	if (ret) {
++		pr_err("adding private data failed\n");
++		goto err_free_eraseregions;
++	}
++
++	ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0);
++
++	if (ret) {
++		pr_err("mtd_device_register failed\n");
++		goto err_free_eraseregions;
++	}
+ 	return 0;
+ 
+-err_dev_reg:
+-	kfree(&b47s->mtd);
+-out:
+-	return err;
++err_free_eraseregions:
++	kfree(eraseregions);
++err_free_mtd:
++	kfree(mtd);
++err_out:
++	return ret;
+ }
+ 
+ static int bcm47xxsflash_bcma_remove(struct platform_device *pdev)
+ {
+-	struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev);
+-	struct bcm47xxsflash *b47s = sflash->priv;
+-
+-	mtd_device_unregister(&b47s->mtd);
+-	kfree(b47s);
++	struct mtd_info *mtd = dev_get_drvdata(&pdev->dev);
+ 
++	if (mtd) {
++		mtd_device_unregister(mtd);
++		map_destroy(mtd);
++		kfree(mtd->eraseregions);
++		kfree(mtd);
++		dev_set_drvdata(&pdev->dev, NULL);
++	}
+ 	return 0;
+ }
+ 
++static const struct platform_device_id bcm47xxsflash_table[] = {
++	{ "bcm47xx-sflash", 0 },
++	{ }
++};
++MODULE_DEVICE_TABLE(platform, bcm47xxsflash_table);
++
+ static struct platform_driver bcma_sflash_driver = {
++	.id_table	= bcm47xxsflash_table,
+ 	.probe	= bcm47xxsflash_bcma_probe,
+ 	.remove = bcm47xxsflash_bcma_remove,
+ 	.driver = {
+-		.name = "bcma_sflash",
++		.name = "bcm47xx-sflash",
+ 		.owner = THIS_MODULE,
+ 	},
+ };
+@@ -111,8 +258,7 @@ static int __init bcm47xxsflash_init(voi
+ 
+ 	err = platform_driver_register(&bcma_sflash_driver);
+ 	if (err)
+-		pr_err("Failed to register BCMA serial flash driver: %d\n",
+-		       err);
++		pr_err("error registering platform driver: %i\n", err);
+ 
+ 	return err;
+ }
+--- /dev/null
++++ b/include/linux/mtd/bcm47xxsflash.h
+@@ -0,0 +1,33 @@
++#ifndef LINUX_MTD_BCM47XX_SFLASH_H_
++#define LINUX_MTD_BCM47XX_SFLASH_H_
++
++#include <linux/mtd/mtd.h>
++
++enum bcm47xxsflash_type {
++	BCM47XX_SFLASH_SSB,
++	BCM47XX_SFLASH_BCMA,
++};
++
++struct ssb_chipcommon;
++struct bcma_drv_cc;
++
++struct bcm47xxsflash {
++	enum bcm47xxsflash_type type;
++	union {
++		struct ssb_chipcommon *scc;
++		struct bcma_drv_cc *bcc;
++	};
++
++	bool present;
++	u16 numblocks;
++	u32 window;
++	u32 blocksize;
++	u32 size;
++
++	int (*poll)(struct bcm47xxsflash *dev, u32 offset);
++	int (*write)(struct bcm47xxsflash *dev, u32 offset, u32 len, const u8 *buf);
++	int (*erase)(struct bcm47xxsflash *dev, u32 offset);
++
++	struct mtd_info *mtd;
++};
++#endif /* LINUX_MTD_BCM47XX_SFLASH_H_ */
diff --git a/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch b/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch
new file mode 100644
index 0000000..9a9c194
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/060-ssb-add-serial-flash-driver.patch
@@ -0,0 +1,372 @@
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -139,7 +139,7 @@ config SSB_DRIVER_MIPS
+ 
+ config SSB_SFLASH
+ 	bool "SSB serial flash support"
+-	depends on SSB_DRIVER_MIPS && BROKEN
++	depends on SSB_DRIVER_MIPS
+ 	default y
+ 
+ # Assumption: We are on embedded, if we compile the MIPS core.
+--- a/drivers/ssb/driver_chipcommon_sflash.c
++++ b/drivers/ssb/driver_chipcommon_sflash.c
+@@ -1,14 +1,35 @@
+ /*
+  * Sonics Silicon Backplane
+  * ChipCommon serial flash interface
++ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ * Copyright 2010, Broadcom Corporation
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+ 
++#include <linux/platform_device.h>
++#include <linux/delay.h>
+ #include <linux/ssb/ssb.h>
++#include <linux/ssb/ssb_driver_chipcommon.h>
+ 
+ #include "ssb_private.h"
+ 
++#define NUM_RETRIES	3
++
++static struct resource ssb_sflash_resource = {
++	.name	= "ssb_sflash",
++	.start	= SSB_FLASH2,
++	.end	= 0,
++	.flags  = IORESOURCE_MEM | IORESOURCE_READONLY,
++};
++
++struct platform_device ssb_sflash_dev = {
++	.name		= "bcm47xx-sflash",
++	.resource	= &ssb_sflash_resource,
++	.num_resources	= 1,
++};
++
+ struct ssb_sflash_tbl_e {
+ 	char *name;
+ 	u32 id;
+@@ -16,7 +37,7 @@ struct ssb_sflash_tbl_e {
+ 	u16 numblocks;
+ };
+ 
+-static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = {
+ 	{ "M25P20", 0x11, 0x10000, 4, },
+ 	{ "M25P40", 0x12, 0x10000, 8, },
+ 
+@@ -27,7 +48,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
+ 	{ 0 },
+ };
+ 
+-static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = {
+ 	{ "SST25WF512", 1, 0x1000, 16, },
+ 	{ "SST25VF512", 0x48, 0x1000, 16, },
+ 	{ "SST25WF010", 2, 0x1000, 32, },
+@@ -45,7 +66,7 @@ static struct ssb_sflash_tbl_e ssb_sflas
+ 	{ 0 },
+ };
+ 
+-static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
++static const struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = {
+ 	{ "AT45DB011", 0xc, 256, 512, },
+ 	{ "AT45DB021", 0x14, 256, 1024, },
+ 	{ "AT45DB041", 0x1c, 256, 2048, },
+@@ -70,10 +91,186 @@ static void ssb_sflash_cmd(struct ssb_ch
+ 	pr_err("SFLASH control command failed (timeout)!\n");
+ }
+ 
++static void ssb_sflash_write_u8(struct ssb_chipcommon *chipco, u32 offset, u8 byte)
++{
++	chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset);
++	chipco_write32(chipco, SSB_CHIPCO_FLASHDATA, byte);
++}
++
++/* Poll for command completion. Returns zero when complete. */
++static int ssb_sflash_poll(struct bcm47xxsflash *dev, u32 offset)
++{
++	struct ssb_chipcommon *chipco = dev->scc;
++
++	if (offset >= chipco->sflash.size)
++		return -22;
++
++	switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++	case SSB_CHIPCO_FLASHT_STSER:
++		/* Check for ST Write In Progress bit */
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_RDSR);
++		return chipco_read32(chipco, SSB_CHIPCO_FLASHDATA)
++				& SSB_CHIPCO_FLASHDATA_ST_WIP;
++	case SSB_CHIPCO_FLASHT_ATSER:
++		/* Check for Atmel Ready bit */
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_STATUS);
++		return !(chipco_read32(chipco, SSB_CHIPCO_FLASHDATA)
++				& SSB_CHIPCO_FLASHDATA_AT_READY);
++	}
++
++	return 0;
++}
++
++
++static int sflash_st_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++			   const u8 *buf)
++{
++	int written = 1;
++	struct ssb_chipcommon *chipco = dev->scc;
++
++	/* Enable writes */
++	ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN);
++	ssb_sflash_write_u8(chipco, offset, *buf++);
++	/* Issue a page program with CSA bit set */
++	ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_CSA | SSB_CHIPCO_FLASHCTL_ST_PP);
++	offset++;
++	len--;
++	while (len > 0) {
++		if ((offset & 255) == 0) {
++			/* Page boundary, poll droping cs and return */
++			chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0);
++			udelay(1);
++			if (!ssb_sflash_poll(dev, offset)) {
++				/* Flash rejected command */
++				return -EAGAIN;
++			}
++			return written;
++		} else {
++			/* Write single byte */
++			ssb_sflash_cmd(chipco,
++					SSB_CHIPCO_FLASHCTL_ST_CSA |
++					*buf++);
++		}
++		written++;
++		offset++;
++		len--;
++	}
++	/* All done, drop cs & poll */
++	chipco_write32(chipco, SSB_CHIPCO_FLASHCTL, 0);
++	udelay(1);
++	if (!ssb_sflash_poll(dev, offset)) {
++		/* Flash rejected command */
++		return -EAGAIN;
++	}
++	return written;
++}
++
++static int sflash_at_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++			   const u8 *buf)
++{
++	struct ssb_chipcommon *chipco = dev->scc;
++	u32 page, byte, mask;
++	int ret = 0;
++
++	mask = dev->blocksize - 1;
++	page = (offset & ~mask) << 1;
++	byte = offset & mask;
++	/* Read main memory page into buffer 1 */
++	if (byte || (len < dev->blocksize)) {
++		int i = 100;
++		chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page);
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_LOAD);
++		/* 250 us for AT45DB321B */
++		while (i > 0 && ssb_sflash_poll(dev, offset)) {
++			udelay(10);
++			i--;
++		}
++		BUG_ON(!ssb_sflash_poll(dev, offset));
++	}
++	/* Write into buffer 1 */
++	for (ret = 0; (ret < (int)len) && (byte < dev->blocksize); ret++) {
++		ssb_sflash_write_u8(chipco, byte++, *buf++);
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_WRITE);
++	}
++	/* Write buffer 1 into main memory page */
++	chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, page);
++	ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_BUF1_PROGRAM);
++
++	return ret;
++}
++
++/* Write len bytes starting at offset into buf. Returns number of bytes
++ * written. Caller should poll for completion.
++ */
++static int ssb_sflash_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++		      const u8 *buf)
++{
++	int ret = 0, tries = NUM_RETRIES;
++	struct ssb_chipcommon *chipco = dev->scc;
++
++	if (!len)
++		return 0;
++
++	if ((offset + len) > chipco->sflash.size)
++		return -EINVAL;
++
++	switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++	case SSB_CHIPCO_FLASHT_STSER:
++		do {
++			ret = sflash_st_write(dev, offset, len, buf);
++			tries--;
++		} while (ret == -EAGAIN && tries > 0);
++
++		if (ret == -EAGAIN && tries == 0) {
++			pr_info("ST Flash rejected write\n");
++			ret = -EIO;
++		}
++		break;
++	case SSB_CHIPCO_FLASHT_ATSER:
++		ret = sflash_at_write(dev, offset, len, buf);
++		break;
++	}
++
++	return ret;
++}
++
++/* Erase a region. Returns number of bytes scheduled for erasure.
++ * Caller should poll for completion.
++ */
++static int ssb_sflash_erase(struct bcm47xxsflash *dev, u32 offset)
++{
++	struct ssb_chipcommon *chipco = dev->scc;
++
++	if (offset >= chipco->sflash.size)
++		return -EINVAL;
++
++	switch (chipco->capabilities & SSB_CHIPCO_CAP_FLASHT) {
++	case SSB_CHIPCO_FLASHT_STSER:
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_WREN);
++		chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset);
++		/* Newer flashes have "sub-sectors" which can be erased independently
++		 * with a new command: ST_SSE. The ST_SE command erases 64KB just as
++		 * before.
++		 */
++		if (dev->blocksize < (64 * 1024))
++			ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SSE);
++		else
++			ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_ST_SE);
++		return dev->blocksize;
++	case SSB_CHIPCO_FLASHT_ATSER:
++		chipco_write32(chipco, SSB_CHIPCO_FLASHADDR, offset << 1);
++		ssb_sflash_cmd(chipco, SSB_CHIPCO_FLASHCTL_AT_PAGE_ERASE);
++		return dev->blocksize;
++	}
++
++	return 0;
++}
++
+ /* Initialize serial flash access */
+ int ssb_sflash_init(struct ssb_chipcommon *cc)
+ {
+-	struct ssb_sflash_tbl_e *e;
++	struct bcm47xxsflash *sflash = &cc->sflash;
++	const struct ssb_sflash_tbl_e *e;
+ 	u32 id, id2;
+ 
+ 	switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) {
+@@ -131,10 +328,26 @@ int ssb_sflash_init(struct ssb_chipcommo
+ 		return -ENOTSUPP;
+ 	}
+ 
+-	pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n",
+-		e->name, e->blocksize, e->numblocks);
+-
+-	pr_err("Serial flash support is not implemented yet!\n");
++	sflash->window = SSB_FLASH2;
++	sflash->blocksize = e->blocksize;
++	sflash->numblocks = e->numblocks;
++	sflash->size = sflash->blocksize * sflash->numblocks;
++	sflash->present = true;
++	sflash->poll = ssb_sflash_poll;
++	sflash->write = ssb_sflash_write;
++	sflash->erase = ssb_sflash_erase;
++	sflash->type = BCM47XX_SFLASH_SSB;
++	sflash->scc = cc;
++
++	pr_info("Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
++		  e->name, sflash->size / 1024, sflash->blocksize,
++		  sflash->numblocks);
++
++	/* Prepare platform device, but don't register it yet. It's too early,
++	 * malloc (required by device_private_init) is not available yet. */
++	ssb_sflash_dev.resource[0].end = ssb_sflash_dev.resource[0].start +
++					  sflash->size;
++	ssb_sflash_dev.dev.platform_data = sflash;
+ 
+-	return -ENOTSUPP;
++	return 0;
+ }
+--- a/drivers/ssb/main.c
++++ b/drivers/ssb/main.c
+@@ -549,6 +549,15 @@ static int ssb_devices_register(struct s
+ 		dev_idx++;
+ 	}
+ 
++#ifdef CONFIG_SSB_SFLASH
++	if (bus->chipco.sflash.present) {
++		err = platform_device_register(&ssb_sflash_dev);
++		if (err)
++			ssb_printk(KERN_ERR PFX
++				   "Error registering serial flash\n");
++	}
++#endif
++
+ #ifdef CONFIG_SSB_DRIVER_MIPS
+ 	if (bus->mipscore.pflash.present) {
+ 		err = platform_device_register(&ssb_pflash_dev);
+--- a/drivers/ssb/ssb_private.h
++++ b/drivers/ssb/ssb_private.h
+@@ -220,6 +220,7 @@ extern u32 ssb_chipco_watchdog_timer_set
+ /* driver_chipcommon_sflash.c */
+ #ifdef CONFIG_SSB_SFLASH
+ int ssb_sflash_init(struct ssb_chipcommon *cc);
++extern struct platform_device ssb_sflash_dev;
+ #else
+ static inline int ssb_sflash_init(struct ssb_chipcommon *cc)
+ {
+--- a/include/linux/ssb/ssb_driver_chipcommon.h
++++ b/include/linux/ssb/ssb_driver_chipcommon.h
+@@ -13,6 +13,8 @@
+  * Licensed under the GPL version 2. See COPYING for details.
+  */
+ 
++#include <linux/mtd/bcm47xxsflash.h>
++
+ /** ChipCommon core registers. **/
+ 
+ #define SSB_CHIPCO_CHIPID		0x0000
+@@ -121,6 +123,17 @@
+ #define  SSB_CHIPCO_FLASHCTL_BUSY	SSB_CHIPCO_FLASHCTL_START
+ #define SSB_CHIPCO_FLASHADDR		0x0044
+ #define SSB_CHIPCO_FLASHDATA		0x0048
++/* Status register bits for ST flashes */
++#define  SSB_CHIPCO_FLASHDATA_ST_WIP	0x01		/* Write In Progress */
++#define  SSB_CHIPCO_FLASHDATA_ST_WEL	0x02		/* Write Enable Latch */
++#define  SSB_CHIPCO_FLASHDATA_ST_BP_MASK	0x1c		/* Block Protect */
++#define  SSB_CHIPCO_FLASHDATA_ST_BP_SHIFT	2
++#define  SSB_CHIPCO_FLASHDATA_ST_SRWD	0x80		/* Status Register Write Disable */
++/* Status register bits for Atmel flashes */
++#define  SSB_CHIPCO_FLASHDATA_AT_READY	0x80
++#define  SSB_CHIPCO_FLASHDATA_AT_MISMATCH	0x40
++#define  SSB_CHIPCO_FLASHDATA_AT_ID_MASK	0x38
++#define  SSB_CHIPCO_FLASHDATA_AT_ID_SHIFT	3
+ #define SSB_CHIPCO_BCAST_ADDR		0x0050
+ #define SSB_CHIPCO_BCAST_DATA		0x0054
+ #define SSB_CHIPCO_GPIOPULLUP		0x0058		/* Rev >= 20 only */
+@@ -503,7 +516,7 @@
+ #define SSB_CHIPCO_FLASHCTL_ST_PP	0x0302		/* Page Program */
+ #define SSB_CHIPCO_FLASHCTL_ST_SE	0x02D8		/* Sector Erase */
+ #define SSB_CHIPCO_FLASHCTL_ST_BE	0x00C7		/* Bulk Erase */
+-#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00B9		/* Deep Power-down */
++#define SSB_CHIPCO_FLASHCTL_ST_DP	0x00D9		/* Deep Power-down */
+ #define SSB_CHIPCO_FLASHCTL_ST_RES	0x03AB		/* Read Electronic Signature */
+ #define SSB_CHIPCO_FLASHCTL_ST_CSA	0x1000		/* Keep chip select asserted */
+ #define SSB_CHIPCO_FLASHCTL_ST_SSE	0x0220		/* Sub-sector Erase */
+@@ -594,6 +607,9 @@ struct ssb_chipcommon {
+ 	struct ssb_chipcommon_pmu pmu;
+ 	u32 ticks_per_ms;
+ 	u32 max_timer_ms;
++#ifdef CONFIG_SSB_SFLASH
++	struct bcm47xxsflash sflash;
++#endif
+ };
+ 
+ static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
diff --git a/target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch b/target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch
new file mode 100644
index 0000000..934443d
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/070-bcma-add-functions-to-write-to-serial-flash.patch
@@ -0,0 +1,300 @@
+--- a/drivers/bcma/driver_chipcommon_sflash.c
++++ b/drivers/bcma/driver_chipcommon_sflash.c
+@@ -1,6 +1,9 @@
+ /*
+  * Broadcom specific AMBA
+  * ChipCommon serial flash interface
++ * Copyright 2011, Jonas Gorski <jonas.gorski@gmail.com>
++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
++ * Copyright 2010, Broadcom Corporation
+  *
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
+@@ -8,7 +11,11 @@
+ #include "bcma_private.h"
+ 
+ #include <linux/platform_device.h>
++#include <linux/delay.h>
+ #include <linux/bcma/bcma.h>
++#include <linux/bcma/bcma_driver_chipcommon.h>
++
++#define NUM_RETRIES	3
+ 
+ static struct resource bcma_sflash_resource = {
+ 	.name	= "bcma_sflash",
+@@ -18,7 +25,7 @@ static struct resource bcma_sflash_resou
+ };
+ 
+ struct platform_device bcma_sflash_dev = {
+-	.name		= "bcma_sflash",
++	.name		= "bcm47xx-sflash",
+ 	.resource	= &bcma_sflash_resource,
+ 	.num_resources	= 1,
+ };
+@@ -30,7 +37,7 @@ struct bcma_sflash_tbl_e {
+ 	u16 numblocks;
+ };
+ 
+-static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+ 	{ "M25P20", 0x11, 0x10000, 4, },
+ 	{ "M25P40", 0x12, 0x10000, 8, },
+ 
+@@ -41,7 +48,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
+ 	{ 0 },
+ };
+ 
+-static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+ 	{ "SST25WF512", 1, 0x1000, 16, },
+ 	{ "SST25VF512", 0x48, 0x1000, 16, },
+ 	{ "SST25WF010", 2, 0x1000, 32, },
+@@ -59,7 +66,7 @@ static struct bcma_sflash_tbl_e bcma_sfl
+ 	{ 0 },
+ };
+ 
+-static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
++static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+ 	{ "AT45DB011", 0xc, 256, 512, },
+ 	{ "AT45DB021", 0x14, 256, 1024, },
+ 	{ "AT45DB041", 0x1c, 256, 2048, },
+@@ -84,12 +91,186 @@ static void bcma_sflash_cmd(struct bcma_
+ 	bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
+ }
+ 
++static void bcma_sflash_write_u8(struct bcma_drv_cc *cc, u32 offset, u8 byte)
++{
++	bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
++	bcma_cc_write32(cc, BCMA_CC_FLASHDATA, byte);
++}
++
++/* Poll for command completion. Returns zero when complete. */
++static int bcma_sflash_poll(struct bcm47xxsflash *dev, u32 offset)
++{
++	struct bcma_drv_cc *cc = dev->bcc;
++
++	if (offset >= cc->sflash.size)
++		return -22;
++
++	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++	case BCMA_CC_FLASHT_STSER:
++		/* Check for ST Write In Progress bit */
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RDSR);
++		return bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
++				& BCMA_CC_FLASHDATA_ST_WIP;
++	case BCMA_CC_FLASHT_ATSER:
++		/* Check for Atmel Ready bit */
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
++		return !(bcma_cc_read32(cc, BCMA_CC_FLASHDATA)
++				& BCMA_CC_FLASHDATA_AT_READY);
++	}
++
++	return 0;
++}
++
++static int sflash_st_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++			   const u8 *buf)
++{
++	int written = 1;
++	struct bcma_drv_cc *cc = dev->bcc;
++
++	/* Enable writes */
++	bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
++	bcma_sflash_write_u8(cc, offset, *buf++);
++	/* Issue a page program with CSA bit set */
++	bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_CSA | BCMA_CC_FLASHCTL_ST_PP);
++	offset++;
++	len--;
++	while (len > 0) {
++		if ((offset & 255) == 0) {
++			/* Page boundary, poll droping cs and return */
++			bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
++			udelay(1);
++			if (!bcma_sflash_poll(dev, offset)) {
++				/* Flash rejected command */
++				return -EAGAIN;
++			}
++			return written;
++		} else {
++			/* Write single byte */
++			bcma_sflash_cmd(cc,
++					BCMA_CC_FLASHCTL_ST_CSA |
++					*buf++);
++		}
++		written++;
++		offset++;
++		len--;
++	}
++	/* All done, drop cs & poll */
++	bcma_cc_write32(cc, BCMA_CC_FLASHCTL, 0);
++	udelay(1);
++	if (!bcma_sflash_poll(dev, offset)) {
++		/* Flash rejected command */
++		return -EAGAIN;
++	}
++	return written;
++}
++
++static int sflash_at_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++			   const u8 *buf)
++{
++	struct bcma_drv_cc *cc = dev->bcc;
++	u32 page, byte, mask;
++	int ret = 0;
++
++	mask = dev->blocksize - 1;
++	page = (offset & ~mask) << 1;
++	byte = offset & mask;
++	/* Read main memory page into buffer 1 */
++	if (byte || (len < dev->blocksize)) {
++		int i = 100;
++		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_LOAD);
++		/* 250 us for AT45DB321B */
++		while (i > 0 && bcma_sflash_poll(dev, offset)) {
++			udelay(10);
++			i--;
++		}
++		BUG_ON(!bcma_sflash_poll(dev, offset));
++	}
++	/* Write into buffer 1 */
++	for (ret = 0; (ret < (int)len) && (byte < dev->blocksize); ret++) {
++		bcma_sflash_write_u8(cc, byte++, *buf++);
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_WRITE);
++	}
++	/* Write buffer 1 into main memory page */
++	bcma_cc_write32(cc, BCMA_CC_FLASHADDR, page);
++	bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_BUF1_PROGRAM);
++
++	return ret;
++}
++
++/* Write len bytes starting at offset into buf. Returns number of bytes
++ * written. Caller should poll for completion.
++ */
++static int bcma_sflash_write(struct bcm47xxsflash *dev, u32 offset, u32 len,
++		      const u8 *buf)
++{
++	int ret = 0, tries = NUM_RETRIES;
++	struct bcma_drv_cc *cc = dev->bcc;
++
++	if (!len)
++		return 0;
++
++	if ((offset + len) > cc->sflash.size)
++		return -EINVAL;
++
++	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++	case BCMA_CC_FLASHT_STSER:
++		do {
++			ret = sflash_st_write(dev, offset, len, buf);
++			tries--;
++		} while (ret == -EAGAIN && tries > 0);
++
++		if (ret == -EAGAIN && tries == 0) {
++			bcma_info(cc->core->bus, "ST Flash rejected write\n");
++			ret = -EIO;
++		}
++		break;
++	case BCMA_CC_FLASHT_ATSER:
++		ret = sflash_at_write(dev, offset, len, buf);
++		break;
++	}
++
++	return ret;
++}
++
++/* Erase a region. Returns number of bytes scheduled for erasure.
++ * Caller should poll for completion.
++ */
++static int bcma_sflash_erase(struct bcm47xxsflash *dev, u32 offset)
++{
++	struct bcma_drv_cc *cc = dev->bcc;
++
++	if (offset >= cc->sflash.size)
++		return -EINVAL;
++
++	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
++	case BCMA_CC_FLASHT_STSER:
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_WREN);
++		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset);
++		/* Newer flashes have "sub-sectors" which can be erased independently
++		 * with a new command: ST_SSE. The ST_SE command erases 64KB just as
++		 * before.
++		 */
++		if (dev->blocksize < (64 * 1024))
++			bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SSE);
++		else
++			bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_SE);
++		return dev->blocksize;
++	case BCMA_CC_FLASHT_ATSER:
++		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, offset << 1);
++		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_PAGE_ERASE);
++		return dev->blocksize;
++	}
++
++	return 0;
++}
++
+ /* Initialize serial flash access */
+ int bcma_sflash_init(struct bcma_drv_cc *cc)
+ {
+ 	struct bcma_bus *bus = cc->core->bus;
+-	struct bcma_sflash *sflash = &cc->sflash;
+-	struct bcma_sflash_tbl_e *e;
++	struct bcm47xxsflash *sflash = &cc->sflash;
++	const struct bcma_sflash_tbl_e *e;
+ 	u32 id, id2;
+ 
+ 	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+@@ -150,6 +331,11 @@ int bcma_sflash_init(struct bcma_drv_cc
+ 	sflash->numblocks = e->numblocks;
+ 	sflash->size = sflash->blocksize * sflash->numblocks;
+ 	sflash->present = true;
++	sflash->poll = bcma_sflash_poll;
++	sflash->write = bcma_sflash_write;
++	sflash->erase = bcma_sflash_erase;
++	sflash->type = BCM47XX_SFLASH_BCMA;
++	sflash->bcc = cc;
+ 
+ 	bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+ 		  e->name, sflash->size / 1024, sflash->blocksize,
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -3,6 +3,7 @@
+ 
+ #include <linux/platform_device.h>
+ #include <linux/gpio.h>
++#include <linux/mtd/bcm47xxsflash.h>
+ 
+ /** ChipCommon core registers. **/
+ #define BCMA_CC_ID			0x0000
+@@ -519,19 +520,6 @@ struct bcma_pflash {
+ 	u32 window_size;
+ };
+ 
+-#ifdef CONFIG_BCMA_SFLASH
+-struct bcma_sflash {
+-	bool present;
+-	u32 window;
+-	u32 blocksize;
+-	u16 numblocks;
+-	u32 size;
+-
+-	struct mtd_info *mtd;
+-	void *priv;
+-};
+-#endif
+-
+ #ifdef CONFIG_BCMA_NFLASH
+ struct mtd_info;
+ 
+@@ -565,7 +553,7 @@ struct bcma_drv_cc {
+ #ifdef CONFIG_BCMA_DRIVER_MIPS
+ 	struct bcma_pflash pflash;
+ #ifdef CONFIG_BCMA_SFLASH
+-	struct bcma_sflash sflash;
++	struct bcm47xxsflash sflash;
+ #endif
+ #ifdef CONFIG_BCMA_NFLASH
+ 	struct bcma_nflash nflash;
diff --git a/target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch b/target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch
new file mode 100644
index 0000000..04c378f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/080-MIPS-BCM47XX-rewrite-nvram-probing.patch
@@ -0,0 +1,472 @@
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -3,7 +3,7 @@
+  *
+  * Copyright (C) 2005 Broadcom Corporation
+  * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+- * Copyright (C) 2010-2011 Hauke Mehrtens <hauke@hauke-m.de>
++ * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
+  *
+  * This program is free software; you can redistribute  it and/or modify it
+  * under  the terms of  the GNU General  Public License as published by the
+@@ -18,83 +18,168 @@
+ #include <linux/kernel.h>
+ #include <linux/string.h>
+ #include <asm/addrspace.h>
+-#include <asm/mach-bcm47xx/nvram.h>
++#include <bcm47xx_nvram.h>
+ #include <asm/mach-bcm47xx/bcm47xx.h>
+ 
+ static char nvram_buf[NVRAM_SPACE];
+ 
++static u32 find_nvram_size(u32 end)
++{
++	struct nvram_header *header;
++	u32 nvram_sizes[] = {0x8000, 0xF000, 0x10000};
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(nvram_sizes); i++) {
++		header = (struct nvram_header *)KSEG1ADDR(end - nvram_sizes[i]);
++		if (header->magic == NVRAM_HEADER)
++			return nvram_sizes[i];
++	}
++
++	return 0;
++}
++
+ /* Probe for NVRAM header */
+-static void early_nvram_init(void)
++static int nvram_find_and_copy(u32 base, u32 lim)
+ {
+-#ifdef CONFIG_BCM47XX_SSB
+-	struct ssb_mipscore *mcore_ssb;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+-	struct bcma_drv_cc *bcma_cc;
+-#endif
+ 	struct nvram_header *header;
+ 	int i;
+-	u32 base = 0;
+-	u32 lim = 0;
+ 	u32 off;
+ 	u32 *src, *dst;
++	u32 size;
+ 
+-	switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+-	case BCM47XX_BUS_TYPE_SSB:
+-		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
+-		base = mcore_ssb->pflash.window;
+-		lim = mcore_ssb->pflash.window_size;
+-		break;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+-	case BCM47XX_BUS_TYPE_BCMA:
+-		bcma_cc = &bcm47xx_bus.bcma.bus.drv_cc;
+-		base = bcma_cc->pflash.window;
+-		lim = bcma_cc->pflash.window_size;
+-		break;
+-#endif
+-	}
+-
++	/* TODO: when nvram is on nand flash check for bad blocks first. */
+ 	off = FLASH_MIN;
+ 	while (off <= lim) {
+ 		/* Windowed flash access */
+-		header = (struct nvram_header *)
+-			KSEG1ADDR(base + off - NVRAM_SPACE);
+-		if (header->magic == NVRAM_HEADER)
++		size = find_nvram_size(base + off);
++		if (size) {
++			header = (struct nvram_header *)KSEG1ADDR(base + off -
++								  size);
+ 			goto found;
++		}
+ 		off <<= 1;
+ 	}
+ 
+ 	/* Try embedded NVRAM at 4 KB and 1 KB as last resorts */
+ 	header = (struct nvram_header *) KSEG1ADDR(base + 4096);
+-	if (header->magic == NVRAM_HEADER)
++	if (header->magic == NVRAM_HEADER) {
++		size = NVRAM_SPACE;
+ 		goto found;
++	}
+ 
+ 	header = (struct nvram_header *) KSEG1ADDR(base + 1024);
+-	if (header->magic == NVRAM_HEADER)
++	if (header->magic == NVRAM_HEADER) {
++		size = NVRAM_SPACE;
+ 		goto found;
++	}
+ 
+-	return;
++	pr_err("no nvram found\n");
++	return -ENXIO;
+ 
+ found:
++
++	if (header->len > size)
++		pr_err("The nvram size accoridng to the header seems to be bigger than the partition on flash\n");
++	if (header->len > NVRAM_SPACE)
++		pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
++		       header->len, NVRAM_SPACE);
++
+ 	src = (u32 *) header;
+ 	dst = (u32 *) nvram_buf;
+ 	for (i = 0; i < sizeof(struct nvram_header); i += 4)
+ 		*dst++ = *src++;
+-	for (; i < header->len && i < NVRAM_SPACE; i += 4)
++	for (; i < header->len && i < NVRAM_SPACE && i < size; i += 4)
+ 		*dst++ = le32_to_cpu(*src++);
++	memset(dst, 0x0, NVRAM_SPACE - i);
++
++	return 0;
++}
++
++#ifdef CONFIG_BCM47XX_SSB
++static int nvram_init_ssb(void)
++{
++	struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
++#ifdef CONFIG_SSB_SFLASH
++	struct ssb_chipcommon *chipco = &bcm47xx_bus.ssb.chipco;
++#endif
++	u32 base;
++	u32 lim;
++
++	if (mcore->pflash.present) {
++		base = mcore->pflash.window;
++		lim = mcore->pflash.window_size;
++#ifdef CONFIG_SSB_SFLASH
++	} else if (chipco->sflash.present) {
++		base = chipco->sflash.window;
++		lim = chipco->sflash.size;
++#endif
++	} else {
++		pr_err("Couldn't find supported flash memory\n");
++		return -ENXIO;
++	}
++
++	return nvram_find_and_copy(base, lim);
++}
++#endif
++
++#ifdef CONFIG_BCM47XX_BCMA
++static int nvram_init_bcma(void)
++{
++	struct bcma_drv_cc *cc = &bcm47xx_bus.bcma.bus.drv_cc;
++	u32 base;
++	u32 lim;
++
++#ifdef CONFIG_BCMA_NFLASH
++	if (cc->nflash.boot) {
++		base = BCMA_SOC_FLASH1;
++		lim = BCMA_SOC_FLASH1_SZ;
++	} else
++#endif
++	if (cc->pflash.present) {
++		base = cc->pflash.window;
++		lim = cc->pflash.window_size;
++#ifdef CONFIG_BCMA_SFLASH
++	} else if (cc->sflash.present) {
++		base = cc->sflash.window;
++		lim = cc->sflash.size;
++#endif
++	} else {
++		pr_err("Couldn't find supported flash memory\n");
++		return -ENXIO;
++	}
++
++	return nvram_find_and_copy(base, lim);
+ }
++#endif
+ 
+-int nvram_getenv(char *name, char *val, size_t val_len)
++static int nvram_init(void)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return nvram_init_ssb();
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return nvram_init_bcma();
++#endif
++	}
++	return -ENXIO;
++}
++
++int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len)
+ {
+ 	char *var, *value, *end, *eq;
++	int err;
+ 
+ 	if (!name)
+-		return NVRAM_ERR_INV_PARAM;
++		return -EINVAL;
+ 
+-	if (!nvram_buf[0])
+-		early_nvram_init();
++	if (!nvram_buf[0]) {
++		err = nvram_init();
++		if (err)
++			return err;
++	}
+ 
+ 	/* Look for name=value and return value */
+ 	var = &nvram_buf[sizeof(struct nvram_header)];
+@@ -110,6 +195,6 @@ int nvram_getenv(char *name, char *val,
+ 			return snprintf(val, val_len, "%s", value);
+ 		}
+ 	}
+-	return NVRAM_ERR_ENVNOTFOUND;
++	return -ENOENT;
+ }
+-EXPORT_SYMBOL(nvram_getenv);
++EXPORT_SYMBOL(bcm47xx_nvram_getenv);
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -35,7 +35,7 @@
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+ #include <bcm47xx.h>
+-#include <asm/mach-bcm47xx/nvram.h>
++#include <bcm47xx_nvram.h>
+ 
+ union bcm47xx_bus bcm47xx_bus;
+ EXPORT_SYMBOL(bcm47xx_bus);
+@@ -115,7 +115,7 @@ static int bcm47xx_get_invariants(struct
+ 	memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
+ 	bcm47xx_fill_sprom(&iv->sprom, NULL, false);
+ 
+-	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
++	if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ 		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
+ 
+ 	return 0;
+@@ -138,7 +138,7 @@ static void __init bcm47xx_register_ssb(
+ 		panic("Failed to initialize SSB bus (err %d)", err);
+ 
+ 	mcore = &bcm47xx_bus.ssb.mipscore;
+-	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
++	if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+ 		if (strstr(buf, "console=ttyS1")) {
+ 			struct ssb_serial_port port;
+ 
+--- a/arch/mips/bcm47xx/sprom.c
++++ b/arch/mips/bcm47xx/sprom.c
+@@ -27,7 +27,7 @@
+  */
+ 
+ #include <bcm47xx.h>
+-#include <nvram.h>
++#include <bcm47xx_nvram.h>
+ 
+ static void create_key(const char *prefix, const char *postfix,
+ 		       const char *name, char *buf, int len)
+@@ -50,10 +50,10 @@ static int get_nvram_var(const char *pre
+ 
+ 	create_key(prefix, postfix, name, key, sizeof(key));
+ 
+-	err = nvram_getenv(key, buf, len);
+-	if (fallback && err == NVRAM_ERR_ENVNOTFOUND && prefix) {
++	err = bcm47xx_nvram_getenv(key, buf, len);
++	if (fallback && err == -ENOENT && prefix) {
+ 		create_key(NULL, postfix, name, key, sizeof(key));
+-		err = nvram_getenv(key, buf, len);
++		err = bcm47xx_nvram_getenv(key, buf, len);
+ 	}
+ 	return err;
+ }
+@@ -144,7 +144,7 @@ static void nvram_read_macaddr(const cha
+ 	if (err < 0)
+ 		return;
+ 
+-	nvram_parse_macaddr(buf, *val);
++	bcm47xx_nvram_parse_macaddr(buf, *val);
+ }
+ 
+ static void nvram_read_alpha2(const char *prefix, const char *name,
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_nvram.h
+@@ -0,0 +1,51 @@
++/*
++ *  Copyright (C) 2005, Broadcom Corporation
++ *  Copyright (C) 2006, Felix Fietkau <nbd@openwrt.org>
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ */
++
++#ifndef __BCM47XX_NVRAM_H
++#define __BCM47XX_NVRAM_H
++
++#include <linux/types.h>
++#include <linux/kernel.h>
++
++struct nvram_header {
++	u32 magic;
++	u32 len;
++	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
++	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
++	u32 config_ncdl;	/* ncdl values for memc */
++};
++
++#define NVRAM_HEADER		0x48534C46	/* 'FLSH' */
++#define NVRAM_VERSION		1
++#define NVRAM_HEADER_SIZE	20
++#define NVRAM_SPACE		0x8000
++
++#define FLASH_MIN		0x00020000	/* Minimum flash size */
++
++#define NVRAM_MAX_VALUE_LEN 255
++#define NVRAM_MAX_PARAM_LEN 64
++
++extern int bcm47xx_nvram_getenv(char *name, char *val, size_t val_len);
++
++static inline void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6])
++{
++	if (strchr(buf, ':'))
++		sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
++			&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
++			&macaddr[5]);
++	else if (strchr(buf, '-'))
++		sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
++			&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
++			&macaddr[5]);
++	else
++		printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
++}
++
++#endif /* __BCM47XX_NVRAM_H */
+--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
++++ /dev/null
+@@ -1,54 +0,0 @@
+-/*
+- *  Copyright (C) 2005, Broadcom Corporation
+- *  Copyright (C) 2006, Felix Fietkau <nbd@openwrt.org>
+- *
+- *  This program is free software; you can redistribute  it and/or modify it
+- *  under  the terms of  the GNU General  Public License as published by the
+- *  Free Software Foundation;  either version 2 of the  License, or (at your
+- *  option) any later version.
+- */
+-
+-#ifndef __NVRAM_H
+-#define __NVRAM_H
+-
+-#include <linux/types.h>
+-#include <linux/kernel.h>
+-
+-struct nvram_header {
+-	u32 magic;
+-	u32 len;
+-	u32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:31 sdram_init */
+-	u32 config_refresh;	/* 0:15 sdram_config, 16:31 sdram_refresh */
+-	u32 config_ncdl;	/* ncdl values for memc */
+-};
+-
+-#define NVRAM_HEADER		0x48534C46	/* 'FLSH' */
+-#define NVRAM_VERSION		1
+-#define NVRAM_HEADER_SIZE	20
+-#define NVRAM_SPACE		0x8000
+-
+-#define FLASH_MIN		0x00020000	/* Minimum flash size */
+-
+-#define NVRAM_MAX_VALUE_LEN 255
+-#define NVRAM_MAX_PARAM_LEN 64
+-
+-#define NVRAM_ERR_INV_PARAM	-8
+-#define NVRAM_ERR_ENVNOTFOUND	-9
+-
+-extern int nvram_getenv(char *name, char *val, size_t val_len);
+-
+-static inline void nvram_parse_macaddr(char *buf, u8 macaddr[6])
+-{
+-	if (strchr(buf, ':'))
+-		sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
+-			&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
+-			&macaddr[5]);
+-	else if (strchr(buf, '-'))
+-		sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
+-			&macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
+-			&macaddr[5]);
+-	else
+-		printk(KERN_WARNING "Can not parse mac address: %s\n", buf);
+-}
+-
+-#endif
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -14,7 +14,7 @@
+ #include <linux/slab.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+-#include <asm/mach-bcm47xx/nvram.h>
++#include <bcm47xx_nvram.h>
+ 
+ /* 10 parts were found on sflash on Netgear WNDR4500 */
+ #define BCM47XXPART_MAX_PARTS		12
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -381,7 +381,7 @@ static void b44_set_flow_ctrl(struct b44
+ }
+ 
+ #ifdef CONFIG_BCM47XX
+-#include <asm/mach-bcm47xx/nvram.h>
++#include <bcm47xx_nvram.h>
+ static void b44_wap54g10_workaround(struct b44 *bp)
+ {
+ 	char buf[20];
+@@ -393,7 +393,7 @@ static void b44_wap54g10_workaround(stru
+ 	 * see https://dev.openwrt.org/ticket/146
+ 	 * check and reset bit "isolate"
+ 	 */
+-	if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
++	if (bcm47xx_nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
+ 		return;
+ 	if (simple_strtoul(buf, NULL, 0) == 2) {
+ 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
+--- a/drivers/ssb/driver_chipcommon_pmu.c
++++ b/drivers/ssb/driver_chipcommon_pmu.c
+@@ -14,7 +14,7 @@
+ #include <linux/delay.h>
+ #include <linux/export.h>
+ #ifdef CONFIG_BCM47XX
+-#include <asm/mach-bcm47xx/nvram.h>
++#include <bcm47xx_nvram.h>
+ #endif
+ 
+ #include "ssb_private.h"
+@@ -322,7 +322,7 @@ static void ssb_pmu_pll_init(struct ssb_
+ 	if (bus->bustype == SSB_BUSTYPE_SSB) {
+ #ifdef CONFIG_BCM47XX
+ 		char buf[20];
+-		if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
++		if (bcm47xx_nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
+ 			crystalfreq = simple_strtoul(buf, NULL, 0);
+ #endif
+ 	}
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -98,14 +98,14 @@ static inline bool ssb_gige_must_flush_p
+ }
+ 
+ #ifdef CONFIG_BCM47XX
+-#include <asm/mach-bcm47xx/nvram.h>
++#include <bcm47xx_nvram.h>
+ /* Get the device MAC address */
+ static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+ {
+ 	char buf[20];
+-	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
++	if (bcm47xx_nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+ 		return;
+-	nvram_parse_macaddr(buf, macaddr);
++	bcm47xx_nvram_parse_macaddr(buf, macaddr);
+ }
+ #else
+ static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
diff --git a/target/linux/brcm47xx/patches-3.8/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch b/target/linux/brcm47xx/patches-3.8/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch
new file mode 100644
index 0000000..5e324e4
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/114-MIPS-BCM47xx-Setup-and-register-serial-early.patch
@@ -0,0 +1,69 @@
+From 9be402f069cc259ad5795b77567d66c4e7f6bef6 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 14:59:24 +0200
+Subject: [PATCH 4/6] MIPS: BCM47xx: Setup and register serial early
+
+Swap the first and second serial if console=ttyS1 was set.
+Set it up and register it for early serial support.
+
+This patch has been in OpenWRT for a long time.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/bcm47xx/setup.c |   39 ++++++++++++++++++++++++++++++++++++++-
+ 1 files changed, 38 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -31,6 +31,8 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
+ #include <linux/bcma/bcma_soc.h>
++#include <linux/serial.h>
++#include <linux/serial_8250.h>
+ #include <asm/bootinfo.h>
+ #include <asm/reboot.h>
+ #include <asm/time.h>
+@@ -121,6 +123,31 @@ static int bcm47xx_get_invariants(struct
+ 	return 0;
+ }
+ 
++#ifdef CONFIG_SERIAL_8250
++static void __init bcm47xx_early_serial_setup(struct ssb_mipscore *mcore)
++{
++	int i;
++
++	for (i = 0; i < mcore->nr_serial_ports; i++) {
++		struct ssb_serial_port *port = &(mcore->serial_ports[i]);
++		struct uart_port s;
++
++		memset(&s, 0, sizeof(s));
++		s.line = i;
++		s.mapbase = (unsigned int) port->regs;
++		s.membase = port->regs;
++		s.irq = port->irq + 2;
++		s.uartclk = port->baud_base;
++		s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
++		s.iotype = SERIAL_IO_MEM;
++		s.regshift = port->reg_shift;
++
++		early_serial_setup(&s);
++	}
++	printk(KERN_DEBUG "Serial init done.\n");
++}
++#endif
++
+ static void __init bcm47xx_register_ssb(void)
+ {
+ 	int err;
+@@ -150,6 +177,10 @@ static void __init bcm47xx_register_ssb(
+ 			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ 		}
+ 	}
++
++#ifdef CONFIG_SERIAL_8250
++	bcm47xx_early_serial_setup(mcore);
++#endif
+ }
+ #endif
+ 
diff --git a/target/linux/brcm47xx/patches-3.8/116-MIPS-BCM47xx-Remove-CFE-console.patch b/target/linux/brcm47xx/patches-3.8/116-MIPS-BCM47xx-Remove-CFE-console.patch
new file mode 100644
index 0000000..a06edd4
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/116-MIPS-BCM47xx-Remove-CFE-console.patch
@@ -0,0 +1,141 @@
+From 5219981646071abb6731634bf47781a53e248764 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Jul 2010 15:11:26 +0200
+Subject: [PATCH 6/6] MIPS: BCM47xx: Remove CFE console
+
+Do not use the CFE console. It causes hangs on some devices like the
+Buffalo WHR-HP-G54.
+This was reported in https://dev.openwrt.org/ticket/4061 and
+https://forum.openwrt.org/viewtopic.php?id=17063
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/mips/Kconfig        |    1 -
+ arch/mips/bcm47xx/prom.c |   82 +++------------------------------------------
+ 2 files changed, 6 insertions(+), 77 deletions(-)
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -115,7 +115,6 @@ config BCM47XX
+ 	select IRQ_CPU
+ 	select SYS_SUPPORTS_32BIT_KERNEL
+ 	select SYS_SUPPORTS_LITTLE_ENDIAN
+-	select SYS_HAS_EARLY_PRINTK
+ 	help
+ 	 Support for BCM47XX based boards
+ 
+--- a/arch/mips/bcm47xx/prom.c
++++ b/arch/mips/bcm47xx/prom.c
+@@ -33,96 +33,28 @@
+ #include <asm/fw/cfe/cfe_api.h>
+ #include <asm/fw/cfe/cfe_error.h>
+ 
+-static int cfe_cons_handle;
+-
+ const char *get_system_type(void)
+ {
+ 	return "Broadcom BCM47XX";
+ }
+ 
+-void prom_putchar(char c)
+-{
+-	while (cfe_write(cfe_cons_handle, &c, 1) == 0)
+-		;
+-}
+-
+-static __init void prom_init_cfe(void)
++static __init int prom_init_cfe(void)
+ {
+ 	uint32_t cfe_ept;
+ 	uint32_t cfe_handle;
+ 	uint32_t cfe_eptseal;
+-	int argc = fw_arg0;
+-	char **envp = (char **) fw_arg2;
+-	int *prom_vec = (int *) fw_arg3;
+-
+-	/*
+-	 * Check if a loader was used; if NOT, the 4 arguments are
+-	 * what CFE gives us (handle, 0, EPT and EPTSEAL)
+-	 */
+-	if (argc < 0) {
+-		cfe_handle = (uint32_t)argc;
+-		cfe_ept = (uint32_t)envp;
+-		cfe_eptseal = (uint32_t)prom_vec;
+-	} else {
+-		if ((int)prom_vec < 0) {
+-			/*
+-			 * Old loader; all it gives us is the handle,
+-			 * so use the "known" entrypoint and assume
+-			 * the seal.
+-			 */
+-			cfe_handle = (uint32_t)prom_vec;
+-			cfe_ept = 0xBFC00500;
+-			cfe_eptseal = CFE_EPTSEAL;
+-		} else {
+-			/*
+-			 * Newer loaders bundle the handle/ept/eptseal
+-			 * Note: prom_vec is in the loader's useg
+-			 * which is still alive in the TLB.
+-			 */
+-			cfe_handle = prom_vec[0];
+-			cfe_ept = prom_vec[2];
+-			cfe_eptseal = prom_vec[3];
+-		}
+-	}
++
++	cfe_eptseal = (uint32_t) fw_arg3;
++	cfe_handle = (uint32_t) fw_arg0;
++	cfe_ept = (uint32_t) fw_arg2;
+ 
+ 	if (cfe_eptseal != CFE_EPTSEAL) {
+-		/* too early for panic to do any good */
+ 		printk(KERN_ERR "CFE's entrypoint seal doesn't match.");
+-		while (1) ;
++		return -1;
+ 	}
+ 
+ 	cfe_init(cfe_handle, cfe_ept);
+-}
+-
+-static __init void prom_init_console(void)
+-{
+-	/* Initialize CFE console */
+-	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
+-}
+-
+-static __init void prom_init_cmdline(void)
+-{
+-	static char buf[COMMAND_LINE_SIZE] __initdata;
+-
+-	/* Get the kernel command line from CFE */
+-	if (cfe_getenv("LINUX_CMDLINE", buf, COMMAND_LINE_SIZE) >= 0) {
+-		buf[COMMAND_LINE_SIZE - 1] = 0;
+-		strcpy(arcs_cmdline, buf);
+-	}
+-
+-	/* Force a console handover by adding a console= argument if needed,
+-	 * as CFE is not available anymore later in the boot process. */
+-	if ((strstr(arcs_cmdline, "console=")) == NULL) {
+-		/* Try to read the default serial port used by CFE */
+-		if ((cfe_getenv("BOOT_CONSOLE", buf, COMMAND_LINE_SIZE) < 0)
+-		    || (strncmp("uart", buf, 4)))
+-			/* Default to uart0 */
+-			strcpy(buf, "uart0");
+-
+-		/* Compute the new command line */
+-		snprintf(arcs_cmdline, COMMAND_LINE_SIZE, "%s console=ttyS%c,115200",
+-			 arcs_cmdline, buf[4]);
+-	}
++	return 0;
+ }
+ 
+ static __init void prom_init_mem(void)
+@@ -173,8 +105,6 @@ static __init void prom_init_mem(void)
+ void __init prom_init(void)
+ {
+ 	prom_init_cfe();
+-	prom_init_console();
+-	prom_init_cmdline();
+ 	prom_init_mem();
+ }
+ 
diff --git a/target/linux/brcm47xx/patches-3.8/119-fix-boot.patch b/target/linux/brcm47xx/patches-3.8/119-fix-boot.patch
new file mode 100644
index 0000000..9834b61
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/119-fix-boot.patch
@@ -0,0 +1,17 @@
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -107,12 +107,14 @@ config ATH79
+ config BCM47XX
+ 	bool "Broadcom BCM47XX based boards"
+ 	select ARCH_WANT_OPTIONAL_GPIOLIB
++	select BOOT_RAW
+ 	select CEVT_R4K
+ 	select CSRC_R4K
+ 	select DMA_NONCOHERENT
+ 	select FW_CFE
+ 	select HW_HAS_PCI
+ 	select IRQ_CPU
++	select NO_EXCEPT_FILL
+ 	select SYS_SUPPORTS_32BIT_KERNEL
+ 	select SYS_SUPPORTS_LITTLE_ENDIAN
+ 	help
diff --git a/target/linux/brcm47xx/patches-3.8/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.8/150-cpu_fixes.patch
new file mode 100644
index 0000000..d07b54c
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/150-cpu_fixes.patch
@@ -0,0 +1,368 @@
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -17,6 +17,20 @@
+ #include <asm/cpu-features.h>
+ #include <asm/mipsmtregs.h>
+ 
++#ifdef CONFIG_BCM47XX
++#include <asm/paccess.h>
++#include <linux/ssb/ssb.h>
++#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
++
++#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
++#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
++#else
++#define BCM4710_DUMMY_RREG()
++
++#define BCM4710_FILL_TLB(addr)
++#define BCM4710_PROTECTED_FILL_TLB(addr)
++#endif
++
+ /*
+  * This macro return a properly sign-extended address suitable as base address
+  * for indexed cache operations.  Two issues here:
+@@ -150,6 +164,7 @@ static inline void flush_icache_line_ind
+ static inline void flush_dcache_line_indexed(unsigned long addr)
+ {
+ 	__dflush_prologue
++	BCM4710_DUMMY_RREG();
+ 	cache_op(Index_Writeback_Inv_D, addr);
+ 	__dflush_epilogue
+ }
+@@ -169,6 +184,7 @@ static inline void flush_icache_line(uns
+ static inline void flush_dcache_line(unsigned long addr)
+ {
+ 	__dflush_prologue
++	BCM4710_DUMMY_RREG();
+ 	cache_op(Hit_Writeback_Inv_D, addr);
+ 	__dflush_epilogue
+ }
+@@ -176,6 +192,7 @@ static inline void flush_dcache_line(uns
+ static inline void invalidate_dcache_line(unsigned long addr)
+ {
+ 	__dflush_prologue
++	BCM4710_DUMMY_RREG();
+ 	cache_op(Hit_Invalidate_D, addr);
+ 	__dflush_epilogue
+ }
+@@ -208,6 +225,7 @@ static inline void flush_scache_line(uns
+  */
+ static inline void protected_flush_icache_line(unsigned long addr)
+ {
++	BCM4710_DUMMY_RREG();
+ 	protected_cache_op(Hit_Invalidate_I, addr);
+ }
+ 
+@@ -219,6 +237,7 @@ static inline void protected_flush_icach
+  */
+ static inline void protected_writeback_dcache_line(unsigned long addr)
+ {
++	BCM4710_DUMMY_RREG();
+ 	protected_cache_op(Hit_Writeback_Inv_D, addr);
+ }
+ 
+@@ -339,8 +358,52 @@ static inline void invalidate_tcache_pag
+ 		: "r" (base),						\
+ 		  "i" (op));
+ 
++static inline void blast_dcache(void)
++{
++	unsigned long start = KSEG0;
++	unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
++	unsigned long end = (start + dcache_size);
++
++	do {
++		BCM4710_DUMMY_RREG();
++		cache_op(Index_Writeback_Inv_D, start);
++		start += current_cpu_data.dcache.linesz;
++	} while(start < end);
++}
++
++static inline void blast_dcache_page(unsigned long page)
++{
++	unsigned long start = page;
++	unsigned long end = start + PAGE_SIZE;
++
++	BCM4710_FILL_TLB(start);
++	do {
++		BCM4710_DUMMY_RREG();
++		cache_op(Hit_Writeback_Inv_D, start);
++		start += current_cpu_data.dcache.linesz;
++	} while(start < end);
++}
++
++static inline void blast_dcache_page_indexed(unsigned long page)
++{
++	unsigned long start = page;
++	unsigned long end = start + PAGE_SIZE;
++	unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
++	unsigned long ws_end = current_cpu_data.dcache.ways <<
++	                       current_cpu_data.dcache.waybit;
++	unsigned long ws, addr;
++	for (ws = 0; ws < ws_end; ws += ws_inc) {
++		start = page + ws;
++		for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
++			BCM4710_DUMMY_RREG();
++			cache_op(Index_Writeback_Inv_D, addr);
++		}
++	}
++}
++
++
+ /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
+-#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \
++#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \
+ static inline void blast_##pfx##cache##lsize(void)			\
+ {									\
+ 	unsigned long start = INDEX_BASE;				\
+@@ -352,6 +415,7 @@ static inline void blast_##pfx##cache##l
+ 									\
+ 	__##pfx##flush_prologue						\
+ 									\
++	war								\
+ 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
+ 		for (addr = start; addr < end; addr += lsize * 32)	\
+ 			cache##lsize##_unroll32(addr|ws, indexop);	\
+@@ -366,6 +430,7 @@ static inline void blast_##pfx##cache##l
+ 									\
+ 	__##pfx##flush_prologue						\
+ 									\
++	war								\
+ 	do {								\
+ 		cache##lsize##_unroll32(start, hitop);			\
+ 		start += lsize * 32;					\
+@@ -384,6 +449,8 @@ static inline void blast_##pfx##cache##l
+ 	                       current_cpu_data.desc.waybit;		\
+ 	unsigned long ws, addr;						\
+ 									\
++	war								\
++									\
+ 	__##pfx##flush_prologue						\
+ 									\
+ 	for (ws = 0; ws < ws_end; ws += ws_inc)				\
+@@ -393,36 +460,38 @@ static inline void blast_##pfx##cache##l
+ 	__##pfx##flush_epilogue						\
+ }
+ 
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16)
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32)
+-__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64)
+-__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64)
+-__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128)
+-
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16)
+-__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64)
+-__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128)
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
++__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
++__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);)
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
++__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
++
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
++__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
++__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
+ 
+ /* build blast_xxx_range, protected_blast_xxx_range */
+-#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \
++#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \
+ static inline void prot##blast_##pfx##cache##_range(unsigned long start, \
+ 						    unsigned long end)	\
+ {									\
+ 	unsigned long lsize = cpu_##desc##_line_size();			\
+ 	unsigned long addr = start & ~(lsize - 1);			\
+ 	unsigned long aend = (end - 1) & ~(lsize - 1);			\
++	war								\
+ 									\
+ 	__##pfx##flush_prologue						\
+ 									\
+ 	while (1) {							\
++		war2						\
+ 		prot##cache_op(hitop, addr);				\
+ 		if (addr == aend)					\
+ 			break;						\
+@@ -432,13 +501,13 @@ static inline void prot##blast_##pfx##ca
+ 	__##pfx##flush_epilogue						\
+ }
+ 
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_)
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_)
+-__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_)
+-__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, )
+-__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, )
++__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, )
++__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, )
+ /* blast_inv_dcache_range */
+-__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, )
+-__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, )
++__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();)
++__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, )
+ 
+ #endif /* _ASM_R4KCACHE_H */
+--- a/arch/mips/include/asm/stackframe.h
++++ b/arch/mips/include/asm/stackframe.h
+@@ -449,6 +449,10 @@
+ 		.macro	RESTORE_SP_AND_RET
+ 		LONG_L	sp, PT_R29(sp)
+ 		.set	mips3
++#ifdef CONFIG_BCM47XX
++		nop
++		nop
++#endif
+ 		eret
+ 		.set	mips0
+ 		.endm
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -51,6 +51,10 @@ NESTED(except_vec1_generic, 0, sp)
+ NESTED(except_vec3_generic, 0, sp)
+ 	.set	push
+ 	.set	noat
++#ifdef CONFIG_BCM47XX
++	nop
++	nop
++#endif
+ #if R5432_CP0_INTERRUPT_WAR
+ 	mfc0	k0, CP0_INDEX
+ #endif
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -34,6 +34,9 @@
+ #include <asm/cacheflush.h> /* for run_uncached() */
+ #include <asm/traps.h>
+ 
++/* For enabling BCM4710 cache workarounds */
++int bcm4710 = 0;
++
+ /*
+  * Special Variant of smp_call_function for use by cache functions:
+  *
+@@ -110,6 +113,9 @@ static void __cpuinit r4k_blast_dcache_p
+ {
+ 	unsigned long  dc_lsize = cpu_dcache_line_size();
+ 
++	if (bcm4710)
++		r4k_blast_dcache_page = blast_dcache_page;
++	else
+ 	if (dc_lsize == 0)
+ 		r4k_blast_dcache_page = (void *)cache_noop;
+ 	else if (dc_lsize == 16)
+@@ -126,6 +132,9 @@ static void __cpuinit r4k_blast_dcache_p
+ {
+ 	unsigned long dc_lsize = cpu_dcache_line_size();
+ 
++	if (bcm4710)
++		r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
++	else
+ 	if (dc_lsize == 0)
+ 		r4k_blast_dcache_page_indexed = (void *)cache_noop;
+ 	else if (dc_lsize == 16)
+@@ -142,6 +151,9 @@ static void __cpuinit r4k_blast_dcache_s
+ {
+ 	unsigned long dc_lsize = cpu_dcache_line_size();
+ 
++	if (bcm4710)
++		r4k_blast_dcache = blast_dcache;
++	else
+ 	if (dc_lsize == 0)
+ 		r4k_blast_dcache = (void *)cache_noop;
+ 	else if (dc_lsize == 16)
+@@ -671,6 +683,8 @@ static void local_r4k_flush_cache_sigtra
+ 	unsigned long addr = (unsigned long) arg;
+ 
+ 	R4600_HIT_CACHEOP_WAR_IMPL;
++	BCM4710_PROTECTED_FILL_TLB(addr);
++	BCM4710_PROTECTED_FILL_TLB(addr + 4);
+ 	if (dc_lsize)
+ 		protected_writeback_dcache_line(addr & ~(dc_lsize - 1));
+ 	if (!cpu_icache_snoops_remote_store && scache_size)
+@@ -1355,6 +1369,17 @@ static void __cpuinit coherency_setup(vo
+ 	 * silly idea of putting something else there ...
+ 	 */
+ 	switch (current_cpu_type()) {
++	case CPU_BMIPS3300:
++		{
++			u32 cm;
++			cm = read_c0_diag();
++			/* Enable icache */
++			cm |= (1 << 31);
++			/* Enable dcache */
++			cm |= (1 << 30);
++			write_c0_diag(cm);
++		}
++		break;
+ 	case CPU_R4000PC:
+ 	case CPU_R4000SC:
+ 	case CPU_R4000MC:
+@@ -1416,6 +1441,15 @@ void __cpuinit r4k_cache_init(void)
+ 	extern void build_copy_page(void);
+ 	struct cpuinfo_mips *c = &current_cpu_data;
+ 
++	/* Check if special workarounds are required */
++#ifdef CONFIG_BCM47XX
++	if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
++		printk("Enabling BCM4710A0 cache workarounds.\n");
++		bcm4710 = 1;
++	} else
++#endif
++		bcm4710 = 0;
++
+ 	probe_pcache();
+ 	setup_scache();
+ 
+@@ -1476,6 +1510,14 @@ void __cpuinit r4k_cache_init(void)
+ #if !defined(CONFIG_MIPS_CMP)
+ 	local_r4k___flush_cache_all(NULL);
+ #endif
++#ifdef CONFIG_BCM47XX
++	{
++		static void (*_coherency_setup)(void);
++		_coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
++		_coherency_setup();
++	}
++#else
+ 	coherency_setup();
++#endif
+ 	board_cache_error_setup = r4k_cache_error_setup;
+ }
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -1314,6 +1314,9 @@ static void __cpuinit build_r4000_tlb_re
+ 			/* No need for uasm_i_nop */
+ 		}
+ 
++#ifdef CONFIG_BCM47XX
++		uasm_i_nop(&p);
++#endif
+ #ifdef CONFIG_64BIT
+ 		build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
+@@ -1845,6 +1848,9 @@ build_r4000_tlbchange_handler_head(u32 *
+ {
+ 	struct work_registers wr = build_get_work_registers(p);
+ 
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++#endif
+ #ifdef CONFIG_64BIT
+ 	build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
+ #else
diff --git a/target/linux/brcm47xx/patches-3.8/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-3.8/160-kmap_coherent.patch
new file mode 100644
index 0000000..4469714
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/160-kmap_coherent.patch
@@ -0,0 +1,77 @@
+--- a/arch/mips/include/asm/cpu-features.h
++++ b/arch/mips/include/asm/cpu-features.h
+@@ -110,6 +110,9 @@
+ #ifndef cpu_has_pindexed_dcache
+ #define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+ #endif
++#ifndef cpu_use_kmap_coherent
++#define cpu_use_kmap_coherent 1
++#endif
+ 
+ /*
+  * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
+@@ -0,0 +1,13 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
++ */
++#ifndef __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++#define __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H
++
++#define cpu_use_kmap_coherent	0
++
++#endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
+--- a/arch/mips/mm/c-r4k.c
++++ b/arch/mips/mm/c-r4k.c
+@@ -506,7 +506,7 @@ static inline void local_r4k_flush_cache
+ 		 */
+ 		map_coherent = (cpu_has_dc_aliases &&
+ 				page_mapped(page) && !Page_dcache_dirty(page));
+-		if (map_coherent)
++		if (map_coherent && cpu_use_kmap_coherent)
+ 			vaddr = kmap_coherent(page, addr);
+ 		else
+ 			vaddr = kmap_atomic(page);
+@@ -529,7 +529,7 @@ static inline void local_r4k_flush_cache
+ 	}
+ 
+ 	if (vaddr) {
+-		if (map_coherent)
++		if (map_coherent && cpu_use_kmap_coherent)
+ 			kunmap_coherent();
+ 		else
+ 			kunmap_atomic(vaddr);
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -208,7 +208,7 @@ void copy_user_highpage(struct page *to,
+ 	void *vfrom, *vto;
+ 
+ 	vto = kmap_atomic(to);
+-	if (cpu_has_dc_aliases &&
++	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ 	    page_mapped(from) && !Page_dcache_dirty(from)) {
+ 		vfrom = kmap_coherent(from, vaddr);
+ 		copy_page(vto, vfrom);
+@@ -230,7 +230,7 @@ void copy_to_user_page(struct vm_area_st
+ 	struct page *page, unsigned long vaddr, void *dst, const void *src,
+ 	unsigned long len)
+ {
+-	if (cpu_has_dc_aliases &&
++	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ 	    page_mapped(page) && !Page_dcache_dirty(page)) {
+ 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+ 		memcpy(vto, src, len);
+@@ -248,7 +248,7 @@ void copy_from_user_page(struct vm_area_
+ 	struct page *page, unsigned long vaddr, void *dst, const void *src,
+ 	unsigned long len)
+ {
+-	if (cpu_has_dc_aliases &&
++	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+ 	    page_mapped(page) && !Page_dcache_dirty(page)) {
+ 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
+ 		memcpy(dst, vfrom, len);
diff --git a/target/linux/brcm47xx/patches-3.8/170-fix-74k-cpu.patch b/target/linux/brcm47xx/patches-3.8/170-fix-74k-cpu.patch
new file mode 100644
index 0000000..a757ec7
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/170-fix-74k-cpu.patch
@@ -0,0 +1,12 @@
+--- a/arch/mips/kernel/cpu-probe.c
++++ b/arch/mips/kernel/cpu-probe.c
+@@ -210,9 +210,6 @@ void __init check_wait(void)
+ 		break;
+ 
+ 	case CPU_74K:
+-		cpu_wait = r4k_wait;
+-		if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
+-			cpu_wait = r4k_wait_irqoff;
+ 		break;
+ 
+ 	case CPU_TX49XX:
diff --git a/target/linux/brcm47xx/patches-3.8/200-MIPS-BCM47XX-use-fallback-for-some-board.patch b/target/linux/brcm47xx/patches-3.8/200-MIPS-BCM47XX-use-fallback-for-some-board.patch
new file mode 100644
index 0000000..5d759f1
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/200-MIPS-BCM47XX-use-fallback-for-some-board.patch
@@ -0,0 +1,17 @@
+--- a/arch/mips/bcm47xx/sprom.c
++++ b/arch/mips/bcm47xx/sprom.c
+@@ -652,12 +652,10 @@ static void bcm47xx_fill_sprom_ethernet(
+ static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,
+ 				    bool fallback)
+ {
+-	nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0,
+-		       fallback);
++	nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0, true);
+ 	nvram_read_u16(prefix, NULL, "boardnum", &sprom->board_num, 0,
+ 		       fallback);
+-	nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0,
+-		       fallback);
++	nvram_read_u16(prefix, NULL, "boardtype", &sprom->board_type, 0, true);
+ 	nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
+ 			 &sprom->boardflags_hi, fallback);
+ 	nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo,
diff --git a/target/linux/brcm47xx/patches-3.8/201-MIPS-BCM47XX-trim-the-nvram-values-for-parsing.patch b/target/linux/brcm47xx/patches-3.8/201-MIPS-BCM47XX-trim-the-nvram-values-for-parsing.patch
new file mode 100644
index 0000000..417e140
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/201-MIPS-BCM47XX-trim-the-nvram-values-for-parsing.patch
@@ -0,0 +1,29 @@
+--- a/arch/mips/bcm47xx/sprom.c
++++ b/arch/mips/bcm47xx/sprom.c
+@@ -71,7 +71,7 @@ static void nvram_read_ ## type (const c
+ 			    fallback);					\
+ 	if (err < 0)							\
+ 		return;							\
+-	err = kstrto ## type (buf, 0, &var);				\
++	err = kstrto ## type(strim(buf), 0, &var);			\
+ 	if (err) {							\
+ 		pr_warn("can not parse nvram name %s%s%s with value %s got %i\n",	\
+ 			prefix, name, postfix, buf, err);		\
+@@ -99,7 +99,7 @@ static void nvram_read_u32_2(const char
+ 	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
+ 	if (err < 0)
+ 		return;
+-	err = kstrtou32(buf, 0, &val);
++	err = kstrtou32(strim(buf), 0, &val);
+ 	if (err) {
+ 		pr_warn("can not parse nvram name %s%s with value %s got %i\n",
+ 			prefix, name, buf, err);
+@@ -120,7 +120,7 @@ static void nvram_read_leddc(const char
+ 	err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
+ 	if (err < 0)
+ 		return;
+-	err = kstrtou32(buf, 0, &val);
++	err = kstrtou32(strim(buf), 0, &val);
+ 	if (err) {
+ 		pr_warn("can not parse nvram name %s%s with value %s got %i\n",
+ 			prefix, name, buf, err);
diff --git a/target/linux/brcm47xx/patches-3.8/210-b44_phy_fix.patch b/target/linux/brcm47xx/patches-3.8/210-b44_phy_fix.patch
new file mode 100644
index 0000000..113e1fb
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/210-b44_phy_fix.patch
@@ -0,0 +1,54 @@
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -410,10 +410,34 @@ static void b44_wap54g10_workaround(stru
+ error:
+ 	pr_warning("PHY: cannot reset MII transceiver isolate bit\n");
+ }
++
++static void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++	char buf[20];
++	struct ssb_device *sdev = bp->sdev;
++
++	/* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
++	if (sdev->bus->sprom.board_num == 100) {
++		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++	} else {
++		/* WL-HDD */
++		if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
++		    !strncmp(buf, "WL300-", strlen("WL300-"))) {
++			if (sdev->bus->sprom.et0phyaddr == 0 &&
++			    sdev->bus->sprom.et1phyaddr == 1)
++				bp->phy_addr = B44_PHY_ADDR_NO_PHY;
++		}
++	}
++	return;
++}
+ #else
+ static inline void b44_wap54g10_workaround(struct b44 *bp)
+ {
+ }
++
++static inline void b44_bcm47xx_workarounds(struct b44 *bp)
++{
++}
+ #endif
+ 
+ static int b44_setup_phy(struct b44 *bp)
+@@ -422,6 +446,7 @@ static int b44_setup_phy(struct b44 *bp)
+ 	int err;
+ 
+ 	b44_wap54g10_workaround(bp);
++	b44_bcm47xx_workarounds(bp);
+ 
+ 	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
+ 		return 0;
+@@ -2104,6 +2129,8 @@ static int b44_get_invariants(struct b44
+ 	 * valid PHY address. */
+ 	bp->phy_addr &= 0x1F;
+ 
++	b44_bcm47xx_workarounds(bp);
++
+ 	memcpy(bp->dev->dev_addr, addr, 6);
+ 
+ 	if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
diff --git a/target/linux/brcm47xx/patches-3.8/211-b44_timeout_spam.patch b/target/linux/brcm47xx/patches-3.8/211-b44_timeout_spam.patch
new file mode 100644
index 0000000..c2eb3ad
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/211-b44_timeout_spam.patch
@@ -0,0 +1,15 @@
+--- a/drivers/net/ethernet/broadcom/b44.c
++++ b/drivers/net/ethernet/broadcom/b44.c
+@@ -187,10 +187,11 @@ static int b44_wait_bit(struct b44 *bp,
+ 		udelay(10);
+ 	}
+ 	if (i == timeout) {
++#if 0
+ 		if (net_ratelimit())
+ 			netdev_err(bp->dev, "BUG!  Timeout waiting for bit %08x of register %lx to %s\n",
+ 				   bit, reg, clear ? "clear" : "set");
+-
++#endif
+ 		return -ENODEV;
+ 	}
+ 	return 0;
diff --git a/target/linux/brcm47xx/patches-3.8/241-bcma-broadcom-2011-sdk-updates.patch b/target/linux/brcm47xx/patches-3.8/241-bcma-broadcom-2011-sdk-updates.patch
new file mode 100644
index 0000000..72b0208
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/241-bcma-broadcom-2011-sdk-updates.patch
@@ -0,0 +1,10 @@
+--- a/drivers/bcma/core.c
++++ b/drivers/bcma/core.c
+@@ -43,6 +43,7 @@ int bcma_core_enable(struct bcma_device
+ 	bcma_aread32(core, BCMA_IOCTL);
+ 
+ 	bcma_awrite32(core, BCMA_RESET_CTL, 0);
++	bcma_aread32(core, BCMA_RESET_CTL);
+ 	udelay(1);
+ 
+ 	bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags));
diff --git a/target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch b/target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch
new file mode 100644
index 0000000..6edbaed
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/260-MIPS-BCM47XX-add-board-detection.patch
@@ -0,0 +1,322 @@
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -4,4 +4,5 @@
+ #
+ 
+ obj-y 				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
++obj-y				+= board.o
+ obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
+--- /dev/null
++++ b/arch/mips/bcm47xx/board.c
+@@ -0,0 +1,219 @@
++#include <linux/export.h>
++#include <linux/string.h>
++#include <bcm47xx_board.h>
++#include <bcm47xx_nvram.h>
++
++struct bcm47xx_board_type {
++	const enum bcm47xx_board board;
++	const char *name;
++};
++
++struct bcm47xx_board_type_list {
++	struct bcm47xx_board_type board;
++	const char *value1;
++	const char *value2;
++};
++
++static const struct bcm47xx_board_type *bcm47xx_board = NULL;
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_model_name[] = {
++	{{BCM47XX_BOARD_DLINK_DIR130, "D-Link DIR-130"}, "DIR-130",},
++	{{BCM47XX_BOARD_DLINK_DIR330, "D-Link DIR-330"}, "DIR-330",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_model_no[] = {
++	{{BCM47XX_BOARD_ASUS_WL700GE, "Asus WL700"}, "WL700",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_hardware_version[] = {
++	{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16-",},
++	{{BCM47XX_BOARD_ASUS_WL330GE, "Asus WL330GE"}, "WL330GE-",},
++	{{BCM47XX_BOARD_ASUS_WL500GPV1, "Asus WL500GP V1"}, "WL500gp-",},
++	{{BCM47XX_BOARD_ASUS_WL500GPV2, "Asus WL500GP V2"}, "WL500GPV2-",},
++	{{BCM47XX_BOARD_ASUS_WL520GC, "Asus WL520GC"}, "WL520GC-",},
++	{{BCM47XX_BOARD_ASUS_WL520GU, "Asus WL520GU"}, "WL520GU-",},
++	{{BCM47XX_BOARD_BELKIN_F7D4301, "Belkin F7D4301"}, "F7D4301",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_productid[] = {
++	{{BCM47XX_BOARD_ASUS_RTAC66U, "Asus RT-AC66U"}, "RT-AC66U",},
++	{{BCM47XX_BOARD_ASUS_RTN10D, "Asus RT-N10D"}, "RT-N10D",},
++	{{BCM47XX_BOARD_ASUS_RTN10U, "Asus RT-N10U"}, "RT-N10U",},
++	{{BCM47XX_BOARD_ASUS_RTN12, "Asus RT-N12"}, "RT-N12",},
++	{{BCM47XX_BOARD_ASUS_RTN12B1, "Asus RT-N12B1"}, "RT-N12B1",},
++	{{BCM47XX_BOARD_ASUS_RTN12C1, "Asus RT-N12C1"}, "RT-N12C1",},
++	{{BCM47XX_BOARD_ASUS_RTN12D1, "Asus RT-N12D1"}, "RT-N12D1",},
++	{{BCM47XX_BOARD_ASUS_RTN12HP, "Asus RT-N12HP"}, "RT-N12HP",},
++	{{BCM47XX_BOARD_ASUS_RTN15U, "Asus RT-N15U"}, "RT-N15U",},
++	{{BCM47XX_BOARD_ASUS_RTN16, "Asus RT-N16"}, "RT-N16",},
++	{{BCM47XX_BOARD_ASUS_RTN53, "Asus RT-N53"}, "RT-N53",},
++	{{BCM47XX_BOARD_ASUS_RTN66U, "Asus RT-N66U"}, "RT-N66U",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_ModelId[] = {
++	{{BCM47XX_BOARD_DELL_TM2300, "Dell WX-5565"}, "WX-5565",},
++	{{BCM47XX_BOARD_MOTOROLA_WE800G, "Motorola WE800G"}, "WE800G",},
++	{{BCM47XX_BOARD_MOTOROLA_WR850GP, "Motorola WR850GP"}, "WR850GP",},
++	{{BCM47XX_BOARD_MOTOROLA_WR850GV2V3, "Motorola WR850G"}, "WR850G",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_melco_id[] = {
++	{{BCM47XX_BOARD_BUFFALO_WBR2_G54, "Buffalo WBR2-G54"}, "29bb0332",},
++	{{BCM47XX_BOARD_BUFFALO_WHR2_A54G54, "Buffalo WHR2-A54G54"}, "290441dd",},
++	{{BCM47XX_BOARD_BUFFALO_WHR_G125, "Buffalo WHR-G125"}, "32093",},
++	{{BCM47XX_BOARD_BUFFALO_WHR_G54S, "Buffalo WHR-G54S"}, "30182",},
++	{{BCM47XX_BOARD_BUFFALO_WHR_HP_G54, "Buffalo WHR-HP-G54"}, "30189",},
++	{{BCM47XX_BOARD_BUFFALO_WLA2_G54L, "Buffalo WLA2-G54L"}, "29129",},
++	{{BCM47XX_BOARD_BUFFALO_WZR_G300N, "Buffalo WZR-G300N"}, "31120",},
++	{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54, "Buffalo WZR-RS-G54"}, "30083",},
++	{{BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP, "Buffalo WZR-RS-G54HP"}, "30103",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_boot_hw[] = {
++	{{BCM47XX_BOARD_CISCO_M10V1, "Cisco M10"}, "M10", "1.0"}, /* like WRT160N v3.0 */
++	{{BCM47XX_BOARD_CISCO_M20V1, "Cisco M20"}, "M20", "1.0"}, /* like WRT310N v2.0 */
++	{{BCM47XX_BOARD_LINKSYS_E1000V1, "Linksys E1000 V1"}, "E100", "1.0"},  /* like WRT160N v3.0 */
++	{{BCM47XX_BOARD_LINKSYS_E1000V2, "Linksys E1000 V2"}, "E1000", "2.0"},
++	{{BCM47XX_BOARD_LINKSYS_E2000V1, "Linksys E2000 V1"}, "Linksys E2000", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_E3000V1, "Linksys E3000 V1"}, "E300", "1.0"}, /* like WRT610N v2.0 */
++	{{BCM47XX_BOARD_LINKSYS_E3200V1, "Linksys E3200 V1"}, "E3200", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_E4200V1, "Linksys E4200 V1"}, "E4200", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT150NV11, "Linksys WRT150N V1.1"}, "WRT150N", "1.1"},
++	{{BCM47XX_BOARD_LINKSYS_WRT150NV1, "Linksys WRT150N V1"}, "WRT150N", "1"},
++	{{BCM47XX_BOARD_LINKSYS_WRT160NV1, "Linksys WRT160N V1"}, "WRT160N", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT160NV3, "Linksys WRT160N V3"}, "WRT160N", "3.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
++	{{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
++	{{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type_list bcm47xx_board_list_board_id[] = {
++	{{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR3400VCNA, "Netgear WNDR3400 Vcna"}, "U12H155T01_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR3700V3, "Netgear WNDR3700 V3"}, "U12H194T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR4000, "Netgear WNDR4000"}, "U12H181T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNDR4500, "Netgear WNDR4500"}, "U12H189T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR2000, "Netgear WNR2000"}, "U12H114T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR3500L, "Netgear WNR3500L"}, "U12H136T99_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR3500U, "Netgear WNR3500U"}, "U12H136T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR3500V2, "Netgear WNR3500 V2"}, "U12H127T00_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR3500V2VC, "Netgear WNR3500 V2vc"}, "U12H127T70_NETGEAR",},
++	{{BCM47XX_BOARD_NETGEAR_WNR834BV2, "Netgear WNR834B V2"}, "U12H081T00_NETGEAR",},
++	{ {0}, 0},
++};
++
++static const struct bcm47xx_board_type bcm47xx_board_unknown[] = {
++	{BCM47XX_BOARD_UNKNOWN, "Unknown Board"},
++};
++
++static inline int startswith(char *source, char *cmp)
++{
++	return !strncmp(source, cmp, strlen(cmp));
++}
++
++static const struct bcm47xx_board_type *bcm47xx_board_get_nvram(void)
++{
++	char buf1[30];
++	char buf2[30];
++	const struct bcm47xx_board_type_list *e;
++
++	if (bcm47xx_nvram_getenv("model_name", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_model_name; e->value1; e++) {
++			if (!strcmp(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("model_no", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_model_no; e->value1; e++) {
++			if (strstarts(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("hardware_version", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_hardware_version; e->value1; e++) {
++			if (strstarts(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("productid", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_productid; e->value1; e++) {
++			if (!strcmp(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("ModelId", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_ModelId; e->value1; e++) {
++			if (!strcmp(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("melco_id", buf1, sizeof(buf1)) >= 0 ||
++	    bcm47xx_nvram_getenv("buf1falo_id", buf1, sizeof(buf1)) >= 0) {
++		/* buffalo hardware, check id for specific hardware matches */
++		for (e = bcm47xx_board_list_melco_id; e->value1; e++) {
++			if (!strcmp(buf1, e->value1))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("boot_hw_model", buf1, sizeof(buf1)) >= 0 &&
++	    bcm47xx_nvram_getenv("boot_hw_ver", buf2, sizeof(buf2)) >= 0) {
++		for (e = bcm47xx_board_list_boot_hw; e->value1; e++) {
++			if (!strcmp(buf1, e->value1) && !strcmp(buf2, e->value2))
++				return &e->board;
++		}
++	}
++
++	if (bcm47xx_nvram_getenv("board_id", buf1, sizeof(buf1)) >= 0) {
++		for (e = bcm47xx_board_list_board_id; e->value1; e++) {
++			if (!strcmp(buf1, e->value1))
++				return &e->board;
++		}
++	}
++	return bcm47xx_board_unknown;
++}
++
++static void bcm47xx_board_detect(void)
++{
++	char buf[15];
++
++	if (bcm47xx_board != NULL)
++		return;
++	/* check if the nvram is available */
++	if (bcm47xx_nvram_getenv("boardtype", buf, sizeof(buf)) == -ENXIO)
++		return;
++
++	bcm47xx_board = bcm47xx_board_get_nvram();
++	pr_info("Found board: \"%s\"\n", bcm47xx_board->name);
++}
++
++enum bcm47xx_board bcm47xx_board_get(void)
++{
++	bcm47xx_board_detect();
++	return bcm47xx_board->board;
++}
++EXPORT_SYMBOL(bcm47xx_board_get);
++
++const char *bcm47xx_board_get_name(void)
++{
++	bcm47xx_board_detect();
++	return bcm47xx_board->name;
++}
++EXPORT_SYMBOL(bcm47xx_board_get_name);
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
+@@ -0,0 +1,89 @@
++#ifndef __BCM47XX_BOARD_H
++#define __BCM47XX_BOARD_H
++
++enum bcm47xx_board {
++	BCM47XX_BOARD_ASUS_RTAC66U,
++	BCM47XX_BOARD_ASUS_RTN10D,
++	BCM47XX_BOARD_ASUS_RTN10U,
++	BCM47XX_BOARD_ASUS_RTN12,
++	BCM47XX_BOARD_ASUS_RTN12B1,
++	BCM47XX_BOARD_ASUS_RTN12C1,
++	BCM47XX_BOARD_ASUS_RTN12D1,
++	BCM47XX_BOARD_ASUS_RTN12HP,
++	BCM47XX_BOARD_ASUS_RTN15U,
++	BCM47XX_BOARD_ASUS_RTN16,
++	BCM47XX_BOARD_ASUS_RTN53,
++	BCM47XX_BOARD_ASUS_RTN66U,
++	BCM47XX_BOARD_ASUS_WL330GE,
++	BCM47XX_BOARD_ASUS_WL500GPV1,
++	BCM47XX_BOARD_ASUS_WL500GPV2,
++	BCM47XX_BOARD_ASUS_WL520GC,
++	BCM47XX_BOARD_ASUS_WL520GU,
++	BCM47XX_BOARD_ASUS_WL700GE,
++
++	BCM47XX_BOARD_BELKIN_F7D4301,
++
++	BCM47XX_BOARD_BUFFALO_WBR2_G54,
++	BCM47XX_BOARD_BUFFALO_WHR2_A54G54,
++	BCM47XX_BOARD_BUFFALO_WHR_G125,
++	BCM47XX_BOARD_BUFFALO_WHR_G54S,
++	BCM47XX_BOARD_BUFFALO_WHR_HP_G54,
++	BCM47XX_BOARD_BUFFALO_WLA2_G54L,
++	BCM47XX_BOARD_BUFFALO_WZR_G300N,
++	BCM47XX_BOARD_BUFFALO_WZR_RS_G54,
++	BCM47XX_BOARD_BUFFALO_WZR_RS_G54HP,
++
++	BCM47XX_BOARD_CISCO_M10V1,
++	BCM47XX_BOARD_CISCO_M20V1,
++
++	BCM47XX_BOARD_DELL_TM2300,
++
++	BCM47XX_BOARD_DLINK_DIR130,
++	BCM47XX_BOARD_DLINK_DIR330,
++
++	BCM47XX_BOARD_LINKSYS_E1000V1,
++	BCM47XX_BOARD_LINKSYS_E1000V2,
++	BCM47XX_BOARD_LINKSYS_E2000V1,
++	BCM47XX_BOARD_LINKSYS_E3000V1,
++	BCM47XX_BOARD_LINKSYS_E3200V1,
++	BCM47XX_BOARD_LINKSYS_E4200V1,
++	BCM47XX_BOARD_LINKSYS_WRT150NV1,
++	BCM47XX_BOARD_LINKSYS_WRT150NV11,
++	BCM47XX_BOARD_LINKSYS_WRT160NV1,
++	BCM47XX_BOARD_LINKSYS_WRT160NV3,
++	BCM47XX_BOARD_LINKSYS_WRT300NV11,
++	BCM47XX_BOARD_LINKSYS_WRT310NV2,
++	BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
++	BCM47XX_BOARD_LINKSYS_WRT610NV1,
++	BCM47XX_BOARD_LINKSYS_WRT610NV2,
++
++	BCM47XX_BOARD_MOTOROLA_WE800G,
++	BCM47XX_BOARD_MOTOROLA_WR850GP,
++	BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
++
++	BCM47XX_BOARD_NETGEAR_WGR614V8,
++	BCM47XX_BOARD_NETGEAR_WGR614V9,
++	BCM47XX_BOARD_NETGEAR_WNDR3300,
++	BCM47XX_BOARD_NETGEAR_WNDR3400V1,
++	BCM47XX_BOARD_NETGEAR_WNDR3400VCNA,
++	BCM47XX_BOARD_NETGEAR_WNDR3700V3,
++	BCM47XX_BOARD_NETGEAR_WNDR4000,
++	BCM47XX_BOARD_NETGEAR_WNDR4500,
++	BCM47XX_BOARD_NETGEAR_WNR2000,
++	BCM47XX_BOARD_NETGEAR_WNR3500L,
++	BCM47XX_BOARD_NETGEAR_WNR3500U,
++	BCM47XX_BOARD_NETGEAR_WNR3500V2,
++	BCM47XX_BOARD_NETGEAR_WNR3500V2VC,
++	BCM47XX_BOARD_NETGEAR_WNR834BV2,
++
++	/* TODO */
++	BCM47XX_BOARD_SIMPLETECH_SIMPLESHARE,
++
++	BCM47XX_BOARD_UNKNOWN,
++	BCM47XX_BOARD_NON,
++};
++
++extern enum bcm47xx_board bcm47xx_board_get(void);
++extern const char *bcm47xx_board_get_name(void);
++
++#endif /* __BCM47XX_BOARD_H */
diff --git a/target/linux/brcm47xx/patches-3.8/261-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch b/target/linux/brcm47xx/patches-3.8/261-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch
new file mode 100644
index 0000000..abfa400
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/261-MIPS-BCM47XX-print-board-name-in-proc-cpuinfo.patch
@@ -0,0 +1,39 @@
+--- a/arch/mips/bcm47xx/prom.c
++++ b/arch/mips/bcm47xx/prom.c
+@@ -32,10 +32,35 @@
+ #include <asm/bootinfo.h>
+ #include <asm/fw/cfe/cfe_api.h>
+ #include <asm/fw/cfe/cfe_error.h>
++#include <bcm47xx.h>
++#include <bcm47xx_board.h>
++
++static u16 get_chip_id(void)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return bcm47xx_bus.ssb.chip_id;
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcm47xx_bus.bcma.bus.chipinfo.id;
++#endif
++	}
++	return 0;
++}
+ 
+ const char *get_system_type(void)
+ {
+-	return "Broadcom BCM47XX";
++	static char buf[128];
++	u16 chip_id = get_chip_id();
++
++	snprintf(buf, sizeof(buf),
++		 (chip_id > 0x9999) ? "Broadcom BCM%d (%s)" :
++				      "Broadcom BCM%04X (%s)",
++		 chip_id, bcm47xx_board_get_name());
++
++	return buf;
+ }
+ 
+ static __init int prom_init_cfe(void)
diff --git a/target/linux/brcm47xx/patches-3.8/270-ssb-fix-unaligned-access-to-mac-address.patch b/target/linux/brcm47xx/patches-3.8/270-ssb-fix-unaligned-access-to-mac-address.patch
new file mode 100644
index 0000000..0a4dd62
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/270-ssb-fix-unaligned-access-to-mac-address.patch
@@ -0,0 +1,18 @@
+--- a/include/linux/ssb/ssb.h
++++ b/include/linux/ssb/ssb.h
+@@ -26,6 +26,7 @@ struct ssb_sprom_core_pwr_info {
+ 
+ struct ssb_sprom {
+ 	u8 revision;
++	u8 country_code;	/* Country Code */
+ 	u8 il0mac[6];		/* MAC address for 802.11b/g */
+ 	u8 et0mac[6];		/* MAC address for Ethernet */
+ 	u8 et1mac[6];		/* MAC address for 802.11a */
+@@ -36,7 +37,6 @@ struct ssb_sprom {
+ 	u16 board_rev;		/* Board revision number from SPROM. */
+ 	u16 board_num;		/* Board number from SPROM. */
+ 	u16 board_type;		/* Board type from SPROM. */
+-	u8 country_code;	/* Country Code */
+ 	char alpha2[2];		/* Country Code as two chars like EU or US */
+ 	u8 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
+ 	u8 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
diff --git a/target/linux/brcm47xx/patches-3.8/280-activate_ssb_support_in_usb.patch b/target/linux/brcm47xx/patches-3.8/280-activate_ssb_support_in_usb.patch
new file mode 100644
index 0000000..c4382ed
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/280-activate_ssb_support_in_usb.patch
@@ -0,0 +1,25 @@
+This prevents the options from being delete with make kernel_oldconfig.
+---
+ drivers/ssb/Kconfig |    2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/bcma/Kconfig
++++ b/drivers/bcma/Kconfig
+@@ -37,6 +37,7 @@ config BCMA_DRIVER_PCI_HOSTMODE
+ config BCMA_HOST_SOC
+ 	bool
+ 	depends on BCMA_DRIVER_MIPS
++	select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
+ 
+ config BCMA_DRIVER_MIPS
+ 	bool "BCMA Broadcom MIPS core driver"
+--- a/drivers/ssb/Kconfig
++++ b/drivers/ssb/Kconfig
+@@ -146,6 +146,7 @@ config SSB_SFLASH
+ config SSB_EMBEDDED
+ 	bool
+ 	depends on SSB_DRIVER_MIPS
++	select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
+ 	default y
+ 
+ config SSB_DRIVER_EXTIF
diff --git a/target/linux/brcm47xx/patches-3.8/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-3.8/300-fork_cacheflush.patch
new file mode 100644
index 0000000..686fb1b
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/300-fork_cacheflush.patch
@@ -0,0 +1,11 @@
+--- a/arch/mips/include/asm/cacheflush.h
++++ b/arch/mips/include/asm/cacheflush.h
+@@ -32,7 +32,7 @@
+ extern void (*flush_cache_all)(void);
+ extern void (*__flush_cache_all)(void);
+ extern void (*flush_cache_mm)(struct mm_struct *mm);
+-#define flush_cache_dup_mm(mm)	do { (void) (mm); } while (0)
++#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+ extern void (*flush_cache_range)(struct vm_area_struct *vma,
+ 	unsigned long start, unsigned long end);
+ extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
diff --git a/target/linux/brcm47xx/patches-3.8/310-no_highpage.patch b/target/linux/brcm47xx/patches-3.8/310-no_highpage.patch
new file mode 100644
index 0000000..7f1889e
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/310-no_highpage.patch
@@ -0,0 +1,66 @@
+--- a/arch/mips/include/asm/page.h
++++ b/arch/mips/include/asm/page.h
+@@ -46,6 +46,7 @@
+ #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
+ 
+ #include <linux/pfn.h>
++#include <asm/cpu-features.h>
+ #include <asm/io.h>
+ 
+ extern void build_clear_page(void);
+@@ -81,13 +82,16 @@ static inline void clear_user_page(void
+ 		flush_data_cache_page((unsigned long)addr);
+ }
+ 
+-extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+-	struct page *to);
+-struct vm_area_struct;
+-extern void copy_user_highpage(struct page *to, struct page *from,
+-	unsigned long vaddr, struct vm_area_struct *vma);
++static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
++	struct page *to)
++{
++	extern void (*flush_data_cache_page)(unsigned long addr);
+ 
+-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
++	copy_page(vto, vfrom);
++	if (!cpu_has_ic_fills_f_dc ||
++	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
++		flush_data_cache_page((unsigned long)vto);
++}
+ 
+ /*
+  * These are used to make use of C type-checking..
+--- a/arch/mips/mm/init.c
++++ b/arch/mips/mm/init.c
+@@ -202,30 +202,6 @@ void kunmap_coherent(void)
+ 	preempt_check_resched();
+ }
+ 
+-void copy_user_highpage(struct page *to, struct page *from,
+-	unsigned long vaddr, struct vm_area_struct *vma)
+-{
+-	void *vfrom, *vto;
+-
+-	vto = kmap_atomic(to);
+-	if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
+-	    page_mapped(from) && !Page_dcache_dirty(from)) {
+-		vfrom = kmap_coherent(from, vaddr);
+-		copy_page(vto, vfrom);
+-		kunmap_coherent();
+-	} else {
+-		vfrom = kmap_atomic(from);
+-		copy_page(vto, vfrom);
+-		kunmap_atomic(vfrom);
+-	}
+-	if ((!cpu_has_ic_fills_f_dc) ||
+-	    pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
+-		flush_data_cache_page((unsigned long)vto);
+-	kunmap_atomic(vto);
+-	/* Make sure this page is cleared on other CPU's too before using it */
+-	smp_wmb();
+-}
+-
+ void copy_to_user_page(struct vm_area_struct *vma,
+ 	struct page *page, unsigned long vaddr, void *dst, const void *src,
+ 	unsigned long len)
diff --git a/target/linux/brcm47xx/patches-3.8/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.8/400-arch-bcm47xx.patch
new file mode 100644
index 0000000..3f8b14d
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/400-arch-bcm47xx.patch
@@ -0,0 +1,177 @@
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -198,3 +198,30 @@ int bcm47xx_nvram_getenv(char *name, cha
+ 	return -ENOENT;
+ }
+ EXPORT_SYMBOL(bcm47xx_nvram_getenv);
++
++char *nvram_get(const char *name)
++{
++	char *var, *value, *end, *eq;
++
++	if (!name)
++		return NULL;
++
++	if (!nvram_buf[0])
++		nvram_init();
++
++	/* Look for name=value and return value */
++	var = &nvram_buf[sizeof(struct nvram_header)];
++	end = nvram_buf + sizeof(nvram_buf) - 2;
++	end[0] = end[1] = '\0';
++	for (; *var; var = value + strlen(value) + 1) {
++		eq = strchr(var, '=');
++		if (!eq)
++			break;
++		value = eq + 1;
++		if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0)
++			return value;
++	}
++
++	return NULL;
++}
++EXPORT_SYMBOL(nvram_get);
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -5,4 +5,5 @@
+ 
+ obj-y 				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+ obj-y				+= board.o
++obj-y 				+= gpio.o
+ obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
+--- /dev/null
++++ b/arch/mips/bcm47xx/gpio.c
+@@ -0,0 +1,119 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
++ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
++ *
++ * Parts of this file are based on Atheros AR71XX/AR724X/AR913X GPIO
++ */
++
++#include <linux/export.h>
++#include <linux/gpio.h>
++#include <linux/ssb/ssb_embedded.h>
++#include <linux/bcma/bcma.h>
++
++#include <bcm47xx.h>
++
++/* low level BCM47xx gpio api */
++u32 bcm47xx_gpio_in(u32 mask)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_in(&bcm47xx_bus.ssb, mask);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_in(&bcm47xx_bus.bcma.bus.drv_cc, mask);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_in);
++
++u32 bcm47xx_gpio_out(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_out(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_out(&bcm47xx_bus.bcma.bus.drv_cc, mask,
++					    value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_out);
++
++u32 bcm47xx_gpio_outen(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_outen(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_outen(&bcm47xx_bus.bcma.bus.drv_cc,
++					      mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_outen);
++
++u32 bcm47xx_gpio_control(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_control(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_control(&bcm47xx_bus.bcma.bus.drv_cc,
++						mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_control);
++
++u32 bcm47xx_gpio_intmask(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_intmask(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_intmask(&bcm47xx_bus.bcma.bus.drv_cc,
++						mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_intmask);
++
++u32 bcm47xx_gpio_polarity(u32 mask, u32 value)
++{
++	switch (bcm47xx_bus_type) {
++#ifdef CONFIG_BCM47XX_SSB
++	case BCM47XX_BUS_TYPE_SSB:
++		return ssb_gpio_polarity(&bcm47xx_bus.ssb, mask, value);
++#endif
++#ifdef CONFIG_BCM47XX_BCMA
++	case BCM47XX_BUS_TYPE_BCMA:
++		return bcma_chipco_gpio_polarity(&bcm47xx_bus.bcma.bus.drv_cc,
++						 mask, value);
++#endif
++	}
++	return -EINVAL;
++}
++EXPORT_SYMBOL(bcm47xx_gpio_polarity);
+--- a/arch/mips/include/asm/mach-bcm47xx/gpio.h
++++ b/arch/mips/include/asm/mach-bcm47xx/gpio.h
+@@ -14,4 +14,11 @@ static inline int irq_to_gpio(unsigned i
+ 	return -EINVAL;
+ }
+ 
++u32 bcm47xx_gpio_in(u32 mask);
++u32 bcm47xx_gpio_out(u32 mask, u32 value);
++u32 bcm47xx_gpio_outen(u32 mask, u32 value);
++u32 bcm47xx_gpio_control(u32 mask, u32 value);
++u32 bcm47xx_gpio_intmask(u32 mask, u32 value);
++u32 bcm47xx_gpio_polarity(u32 mask, u32 value);
++
+ #endif
diff --git a/target/linux/brcm47xx/patches-3.8/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch b/target/linux/brcm47xx/patches-3.8/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch
new file mode 100644
index 0000000..ff670e8
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/520-MIPS-BCM47XX-fix-time-for-WL520G-and-other-200-MHz-C.patch
@@ -0,0 +1,44 @@
+--- a/arch/mips/bcm47xx/time.c
++++ b/arch/mips/bcm47xx/time.c
+@@ -27,10 +27,14 @@
+ #include <linux/ssb/ssb.h>
+ #include <asm/time.h>
+ #include <bcm47xx.h>
++#include <bcm47xx_nvram.h>
+ 
+ void __init plat_time_init(void)
+ {
+ 	unsigned long hz = 0;
++	u16 chip_id = 0;
++	char buf[10];
++	int len;
+ 
+ 	/*
+ 	 * Use deterministic values for initial counter interrupt
+@@ -43,15 +47,26 @@ void __init plat_time_init(void)
+ #ifdef CONFIG_BCM47XX_SSB
+ 	case BCM47XX_BUS_TYPE_SSB:
+ 		hz = ssb_cpu_clock(&bcm47xx_bus.ssb.mipscore) / 2;
++		chip_id = bcm47xx_bus.ssb.chip_id;
+ 		break;
+ #endif
+ #ifdef CONFIG_BCM47XX_BCMA
+ 	case BCM47XX_BUS_TYPE_BCMA:
+ 		hz = bcma_cpu_clock(&bcm47xx_bus.bcma.bus.drv_mips) / 2;
++		chip_id = bcm47xx_bus.bcma.bus.chipinfo.id;
+ 		break;
+ #endif
+ 	}
+ 
++	if (chip_id == 0x5354) {
++		len = bcm47xx_nvram_getenv("clkfreq", buf, sizeof(buf));
++		if (len >= 0 && !strncmp(buf, "200", 4))
++			hz = 100000000;
++		len = bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf));
++		if (len >= 0 && !strncmp(buf, "WL520G", 6))
++			hz = 100000000;
++
++	}
+ 	if (!hz)
+ 		hz = 100000000;
+ 
diff --git a/target/linux/brcm47xx/patches-3.8/540-watchdog-bcm47xx_wdt.c-convert-to-watchdog-core-api.patch b/target/linux/brcm47xx/patches-3.8/540-watchdog-bcm47xx_wdt.c-convert-to-watchdog-core-api.patch
new file mode 100644
index 0000000..7de4de1
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/540-watchdog-bcm47xx_wdt.c-convert-to-watchdog-core-api.patch
@@ -0,0 +1,258 @@
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -971,6 +971,7 @@ config ATH79_WDT
+ config BCM47XX_WDT
+ 	tristate "Broadcom BCM47xx Watchdog Timer"
+ 	depends on BCM47XX
++	select WATCHDOG_CORE
+ 	help
+ 	  Hardware driver for the Broadcom BCM47xx Watchdog Timer.
+ 
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -14,15 +14,12 @@
+ 
+ #include <linux/bitops.h>
+ #include <linux/errno.h>
+-#include <linux/fs.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+-#include <linux/miscdevice.h>
+ #include <linux/module.h>
+ #include <linux/moduleparam.h>
+ #include <linux/reboot.h>
+ #include <linux/types.h>
+-#include <linux/uaccess.h>
+ #include <linux/watchdog.h>
+ #include <linux/timer.h>
+ #include <linux/jiffies.h>
+@@ -41,15 +38,11 @@ module_param(wdt_time, int, 0);
+ MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
+ 				__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+ 
+-#ifdef CONFIG_WATCHDOG_NOWAYOUT
+ module_param(nowayout, bool, 0);
+ MODULE_PARM_DESC(nowayout,
+ 		"Watchdog cannot be stopped once started (default="
+ 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+-#endif
+ 
+-static unsigned long bcm47xx_wdt_busy;
+-static char expect_release;
+ static struct timer_list wdt_timer;
+ static atomic_t ticks;
+ 
+@@ -97,29 +90,31 @@ static void bcm47xx_timer_tick(unsigned
+ 	}
+ }
+ 
+-static inline void bcm47xx_wdt_pet(void)
++static int bcm47xx_wdt_keepalive(struct watchdog_device *wdd)
+ {
+ 	atomic_set(&ticks, wdt_time);
++
++	return 0;
+ }
+ 
+-static void bcm47xx_wdt_start(void)
++static int bcm47xx_wdt_start(struct watchdog_device *wdd)
+ {
+ 	bcm47xx_wdt_pet();
+ 	bcm47xx_timer_tick(0);
++
++	return 0;
+ }
+ 
+-static void bcm47xx_wdt_pause(void)
++static int bcm47xx_wdt_stop(struct watchdog_device *wdd)
+ {
+ 	del_timer_sync(&wdt_timer);
+ 	bcm47xx_wdt_hw_stop();
+-}
+ 
+-static void bcm47xx_wdt_stop(void)
+-{
+-	bcm47xx_wdt_pause();
++	return 0;
+ }
+ 
+-static int bcm47xx_wdt_settimeout(int new_time)
++static int bcm47xx_wdt_set_timeout(struct watchdog_device *wdd,
++				   unsigned int new_time)
+ {
+ 	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
+ 		return -EINVAL;
+@@ -128,51 +123,6 @@ static int bcm47xx_wdt_settimeout(int ne
+ 	return 0;
+ }
+ 
+-static int bcm47xx_wdt_open(struct inode *inode, struct file *file)
+-{
+-	if (test_and_set_bit(0, &bcm47xx_wdt_busy))
+-		return -EBUSY;
+-
+-	bcm47xx_wdt_start();
+-	return nonseekable_open(inode, file);
+-}
+-
+-static int bcm47xx_wdt_release(struct inode *inode, struct file *file)
+-{
+-	if (expect_release == 42) {
+-		bcm47xx_wdt_stop();
+-	} else {
+-		pr_crit("Unexpected close, not stopping watchdog!\n");
+-		bcm47xx_wdt_start();
+-	}
+-
+-	clear_bit(0, &bcm47xx_wdt_busy);
+-	expect_release = 0;
+-	return 0;
+-}
+-
+-static ssize_t bcm47xx_wdt_write(struct file *file, const char __user *data,
+-				size_t len, loff_t *ppos)
+-{
+-	if (len) {
+-		if (!nowayout) {
+-			size_t i;
+-
+-			expect_release = 0;
+-
+-			for (i = 0; i != len; i++) {
+-				char c;
+-				if (get_user(c, data + i))
+-					return -EFAULT;
+-				if (c == 'V')
+-					expect_release = 42;
+-			}
+-		}
+-		bcm47xx_wdt_pet();
+-	}
+-	return len;
+-}
+-
+ static const struct watchdog_info bcm47xx_wdt_info = {
+ 	.identity	= DRV_NAME,
+ 	.options	= WDIOF_SETTIMEOUT |
+@@ -180,80 +130,25 @@ static const struct watchdog_info bcm47x
+ 				WDIOF_MAGICCLOSE,
+ };
+ 
+-static long bcm47xx_wdt_ioctl(struct file *file,
+-					unsigned int cmd, unsigned long arg)
+-{
+-	void __user *argp = (void __user *)arg;
+-	int __user *p = argp;
+-	int new_value, retval = -EINVAL;
+-
+-	switch (cmd) {
+-	case WDIOC_GETSUPPORT:
+-		return copy_to_user(argp, &bcm47xx_wdt_info,
+-				sizeof(bcm47xx_wdt_info)) ? -EFAULT : 0;
+-
+-	case WDIOC_GETSTATUS:
+-	case WDIOC_GETBOOTSTATUS:
+-		return put_user(0, p);
+-
+-	case WDIOC_SETOPTIONS:
+-		if (get_user(new_value, p))
+-			return -EFAULT;
+-
+-		if (new_value & WDIOS_DISABLECARD) {
+-			bcm47xx_wdt_stop();
+-			retval = 0;
+-		}
+-
+-		if (new_value & WDIOS_ENABLECARD) {
+-			bcm47xx_wdt_start();
+-			retval = 0;
+-		}
+-
+-		return retval;
+-
+-	case WDIOC_KEEPALIVE:
+-		bcm47xx_wdt_pet();
+-		return 0;
+-
+-	case WDIOC_SETTIMEOUT:
+-		if (get_user(new_value, p))
+-			return -EFAULT;
+-
+-		if (bcm47xx_wdt_settimeout(new_value))
+-			return -EINVAL;
+-
+-		bcm47xx_wdt_pet();
+-
+-	case WDIOC_GETTIMEOUT:
+-		return put_user(wdt_time, p);
+-
+-	default:
+-		return -ENOTTY;
+-	}
+-}
+-
+ static int bcm47xx_wdt_notify_sys(struct notifier_block *this,
+-	unsigned long code, void *unused)
++				  unsigned long code, void *unused)
+ {
+ 	if (code == SYS_DOWN || code == SYS_HALT)
+ 		bcm47xx_wdt_stop();
+ 	return NOTIFY_DONE;
+ }
+ 
+-static const struct file_operations bcm47xx_wdt_fops = {
++static struct watchdog_ops bcm47xx_wdt_ops = {
+ 	.owner		= THIS_MODULE,
+-	.llseek		= no_llseek,
+-	.unlocked_ioctl	= bcm47xx_wdt_ioctl,
+-	.open		= bcm47xx_wdt_open,
+-	.release	= bcm47xx_wdt_release,
+-	.write		= bcm47xx_wdt_write,
++	.start		= bcm47xx_wdt_start,
++	.stop		= bcm47xx_wdt_stop,
++	.ping		= bcm47xx_wdt_keepalive,
++	.set_timeout	= bcm47xx_wdt_set_timeout,
+ };
+ 
+-static struct miscdevice bcm47xx_wdt_miscdev = {
+-	.minor		= WATCHDOG_MINOR,
+-	.name		= "watchdog",
+-	.fops		= &bcm47xx_wdt_fops,
++static struct watchdog_device bcm47xx_wdt_wdd = {
++	.info		= &bcm47xx_wdt_info,
++	.ops		= &bcm47xx_wdt_ops,
+ };
+ 
+ static struct notifier_block bcm47xx_wdt_notifier = {
+@@ -274,12 +169,13 @@ static int __init bcm47xx_wdt_init(void)
+ 		pr_info("wdt_time value must be 0 < wdt_time < %d, using %d\n",
+ 			(WDT_MAX_TIME + 1), wdt_time);
+ 	}
++	watchdog_set_nowayout(&bcm47xx_wdt_wdd, nowayout);
+ 
+ 	ret = register_reboot_notifier(&bcm47xx_wdt_notifier);
+ 	if (ret)
+ 		return ret;
+ 
+-	ret = misc_register(&bcm47xx_wdt_miscdev);
++	ret = watchdog_register_device(&bcm47xx_wdt_wdd);
+ 	if (ret) {
+ 		unregister_reboot_notifier(&bcm47xx_wdt_notifier);
+ 		return ret;
+@@ -292,10 +188,7 @@ static int __init bcm47xx_wdt_init(void)
+ 
+ static void __exit bcm47xx_wdt_exit(void)
+ {
+-	if (!nowayout)
+-		bcm47xx_wdt_stop();
+-
+-	misc_deregister(&bcm47xx_wdt_miscdev);
++	watchdog_unregister_device(&bcm47xx_wdt_wdd);
+ 
+ 	unregister_reboot_notifier(&bcm47xx_wdt_notifier);
+ }
+@@ -306,4 +199,3 @@ module_exit(bcm47xx_wdt_exit);
+ MODULE_AUTHOR("Aleksandar Radovanovic");
+ MODULE_DESCRIPTION("Watchdog driver for Broadcom BCM47xx");
+ MODULE_LICENSE("GPL");
+-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/target/linux/brcm47xx/patches-3.8/541-watchdog-bcm47xx_wdt.c-use-platform-device.patch b/target/linux/brcm47xx/patches-3.8/541-watchdog-bcm47xx_wdt.c-use-platform-device.patch
new file mode 100644
index 0000000..cb00760
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/541-watchdog-bcm47xx_wdt.c-use-platform-device.patch
@@ -0,0 +1,283 @@
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -3,6 +3,7 @@
+  *
+  *  Copyright (C) 2008 Aleksandar Radovanovic <biblbroks@sezampro.rs>
+  *  Copyright (C) 2009 Matthieu CASTET <castet.matthieu@free.fr>
++ *  Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+  *
+  *  This program is free software; you can redistribute it and/or
+  *  modify it under the terms of the GNU General Public License
+@@ -12,19 +13,19 @@
+ 
+ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+ 
++#include <linux/bcm47xx_wdt.h>
+ #include <linux/bitops.h>
+ #include <linux/errno.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/moduleparam.h>
++#include <linux/platform_device.h>
+ #include <linux/reboot.h>
+ #include <linux/types.h>
+ #include <linux/watchdog.h>
+ #include <linux/timer.h>
+ #include <linux/jiffies.h>
+-#include <linux/ssb/ssb_embedded.h>
+-#include <asm/mach-bcm47xx/bcm47xx.h>
+ 
+ #define DRV_NAME		"bcm47xx_wdt"
+ 
+@@ -43,48 +44,19 @@ MODULE_PARM_DESC(nowayout,
+ 		"Watchdog cannot be stopped once started (default="
+ 				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+ 
+-static struct timer_list wdt_timer;
+-static atomic_t ticks;
+-
+-static inline void bcm47xx_wdt_hw_start(void)
++static inline struct bcm47xx_wdt *bcm47xx_wdt_get(struct watchdog_device *wdd)
+ {
+-	/* this is 2,5s on 100Mhz clock  and 2s on 133 Mhz */
+-	switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+-	case BCM47XX_BUS_TYPE_SSB:
+-		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0xfffffff);
+-		break;
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+-	case BCM47XX_BUS_TYPE_BCMA:
+-		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc,
+-					       0xfffffff);
+-		break;
+-#endif
+-	}
++	return container_of(wdd, struct bcm47xx_wdt, wdd);
+ }
+ 
+-static inline int bcm47xx_wdt_hw_stop(void)
++static void bcm47xx_timer_tick(unsigned long data)
+ {
+-	switch (bcm47xx_bus_type) {
+-#ifdef CONFIG_BCM47XX_SSB
+-	case BCM47XX_BUS_TYPE_SSB:
+-		return ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
+-#endif
+-#ifdef CONFIG_BCM47XX_BCMA
+-	case BCM47XX_BUS_TYPE_BCMA:
+-		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
+-		return 0;
+-#endif
+-	}
+-	return -EINVAL;
+-}
++	struct bcm47xx_wdt *wdt = (struct bcm47xx_wdt *)data;
++	u32 next_tick = min(wdt->wdd.timeout * 1000, wdt->max_timer_ms);
+ 
+-static void bcm47xx_timer_tick(unsigned long unused)
+-{
+-	if (!atomic_dec_and_test(&ticks)) {
+-		bcm47xx_wdt_hw_start();
+-		mod_timer(&wdt_timer, jiffies + HZ);
++	if (!atomic_dec_and_test(&wdt->soft_ticks)) {
++		wdt->timer_set_ms(wdt, next_tick);
++		mod_timer(&wdt->soft_timer, jiffies + HZ);
+ 	} else {
+ 		pr_crit("Watchdog will fire soon!!!\n");
+ 	}
+@@ -92,23 +64,29 @@ static void bcm47xx_timer_tick(unsigned
+ 
+ static int bcm47xx_wdt_keepalive(struct watchdog_device *wdd)
+ {
+-	atomic_set(&ticks, wdt_time);
++	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
++
++	atomic_set(&wdt->soft_ticks, wdd->timeout);
+ 
+ 	return 0;
+ }
+ 
+ static int bcm47xx_wdt_start(struct watchdog_device *wdd)
+ {
+-	bcm47xx_wdt_pet();
+-	bcm47xx_timer_tick(0);
++	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
++
++	bcm47xx_wdt_keepalive(wdd);
++	bcm47xx_timer_tick((unsigned long)wdt);
+ 
+ 	return 0;
+ }
+ 
+ static int bcm47xx_wdt_stop(struct watchdog_device *wdd)
+ {
+-	del_timer_sync(&wdt_timer);
+-	bcm47xx_wdt_hw_stop();
++	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
++
++	del_timer_sync(&wdt->soft_timer);
++	wdt->timer_set(wdt, 0);
+ 
+ 	return 0;
+ }
+@@ -116,10 +94,13 @@ static int bcm47xx_wdt_stop(struct watch
+ static int bcm47xx_wdt_set_timeout(struct watchdog_device *wdd,
+ 				   unsigned int new_time)
+ {
+-	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
++	if (new_time < 1 || new_time > WDT_MAX_TIME) {
++		pr_warn("timeout value must be 1<=x<=%d, using %d\n",
++			WDT_MAX_TIME, new_time);
+ 		return -EINVAL;
++	}
+ 
+-	wdt_time = new_time;
++	wdd->timeout = new_time;
+ 	return 0;
+ }
+ 
+@@ -133,8 +114,11 @@ static const struct watchdog_info bcm47x
+ static int bcm47xx_wdt_notify_sys(struct notifier_block *this,
+ 				  unsigned long code, void *unused)
+ {
++	struct bcm47xx_wdt *wdt;
++
++	wdt = container_of(this, struct bcm47xx_wdt, notifier);
+ 	if (code == SYS_DOWN || code == SYS_HALT)
+-		bcm47xx_wdt_stop();
++		wdt->wdd.ops->stop(&wdt->wdd);
+ 	return NOTIFY_DONE;
+ }
+ 
+@@ -146,56 +130,72 @@ static struct watchdog_ops bcm47xx_wdt_o
+ 	.set_timeout	= bcm47xx_wdt_set_timeout,
+ };
+ 
+-static struct watchdog_device bcm47xx_wdt_wdd = {
+-	.info		= &bcm47xx_wdt_info,
+-	.ops		= &bcm47xx_wdt_ops,
+-};
+-
+-static struct notifier_block bcm47xx_wdt_notifier = {
+-	.notifier_call = bcm47xx_wdt_notify_sys,
+-};
+-
+-static int __init bcm47xx_wdt_init(void)
++static int bcm47xx_wdt_probe(struct platform_device *pdev)
+ {
+ 	int ret;
++	struct bcm47xx_wdt *wdt = dev_get_platdata(&pdev->dev);
+ 
+-	if (bcm47xx_wdt_hw_stop() < 0)
+-		return -ENODEV;
++	if (!wdt)
++		return -ENXIO;
+ 
+-	setup_timer(&wdt_timer, bcm47xx_timer_tick, 0L);
++	setup_timer(&wdt->soft_timer, bcm47xx_timer_tick,
++		    (long unsigned int)wdt);
+ 
+-	if (bcm47xx_wdt_settimeout(wdt_time)) {
+-		bcm47xx_wdt_settimeout(WDT_DEFAULT_TIME);
+-		pr_info("wdt_time value must be 0 < wdt_time < %d, using %d\n",
+-			(WDT_MAX_TIME + 1), wdt_time);
+-	}
+-	watchdog_set_nowayout(&bcm47xx_wdt_wdd, nowayout);
++	wdt->wdd.ops = &bcm47xx_wdt_ops;
++	wdt->wdd.info = &bcm47xx_wdt_info;
++	wdt->wdd.timeout = WDT_DEFAULT_TIME;
++	ret = wdt->wdd.ops->set_timeout(&wdt->wdd, timeout);
++	if (ret)
++		goto err_timer;
++	watchdog_set_nowayout(&wdt->wdd, nowayout);
++
++	wdt->notifier.notifier_call = &bcm47xx_wdt_notify_sys;
+ 
+-	ret = register_reboot_notifier(&bcm47xx_wdt_notifier);
++	ret = register_reboot_notifier(&wdt->notifier);
+ 	if (ret)
+-		return ret;
++		goto err_timer;
+ 
+-	ret = watchdog_register_device(&bcm47xx_wdt_wdd);
+-	if (ret) {
+-		unregister_reboot_notifier(&bcm47xx_wdt_notifier);
+-		return ret;
+-	}
++	ret = watchdog_register_device(&wdt->wdd);
++	if (ret)
++		goto err_notifier;
+ 
+ 	pr_info("BCM47xx Watchdog Timer enabled (%d seconds%s)\n",
+ 		wdt_time, nowayout ? ", nowayout" : "");
+ 	return 0;
++
++err_notifier:
++	unregister_reboot_notifier(&wdt->notifier);
++err_timer:
++	del_timer_sync(&wdt->soft_timer);
++
++	return ret;
+ }
+ 
+-static void __exit bcm47xx_wdt_exit(void)
++static int bcm47xx_wdt_remove(struct platform_device *pdev)
+ {
+-	watchdog_unregister_device(&bcm47xx_wdt_wdd);
++	struct bcm47xx_wdt *wdt = dev_get_platdata(&pdev->dev);
++
++	if (!wdt)
++		return -ENXIO;
++
++	watchdog_unregister_device(&wdt->wdd);
++	unregister_reboot_notifier(&wdt->notifier);
+ 
+-	unregister_reboot_notifier(&bcm47xx_wdt_notifier);
++	return 0;
+ }
+ 
+-module_init(bcm47xx_wdt_init);
+-module_exit(bcm47xx_wdt_exit);
++static struct platform_driver bcm47xx_wdt_driver = {
++	.driver		= {
++		.owner	= THIS_MODULE,
++		.name	= "bcm47xx-wdt",
++	},
++	.probe		= bcm47xx_wdt_probe,
++	.remove		= bcm47xx_wdt_remove,
++};
++
++module_platform_driver(bcm47xx_wdt_driver);
+ 
+ MODULE_AUTHOR("Aleksandar Radovanovic");
++MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>");
+ MODULE_DESCRIPTION("Watchdog driver for Broadcom BCM47xx");
+ MODULE_LICENSE("GPL");
+--- a/include/linux/bcm47xx_wdt.h
++++ b/include/linux/bcm47xx_wdt.h
+@@ -1,7 +1,10 @@
+ #ifndef LINUX_BCM47XX_WDT_H_
+ #define LINUX_BCM47XX_WDT_H_
+ 
++#include <linux/notifier.h>
++#include <linux/timer.h>
+ #include <linux/types.h>
++#include <linux/watchdog.h>
+ 
+ 
+ struct bcm47xx_wdt {
+@@ -10,6 +13,12 @@ struct bcm47xx_wdt {
+ 	u32 max_timer_ms;
+ 
+ 	void *driver_data;
++
++	struct watchdog_device wdd;
++	struct notifier_block notifier;
++
++	struct timer_list soft_timer;
++	atomic_t soft_ticks;
+ };
+ 
+ static inline void *bcm47xx_wdt_get_drvdata(struct bcm47xx_wdt *wdt)
diff --git a/target/linux/brcm47xx/patches-3.8/542-watchdog-bcm47xx_wdt.c-rename-ops-methods.patch b/target/linux/brcm47xx/patches-3.8/542-watchdog-bcm47xx_wdt.c-rename-ops-methods.patch
new file mode 100644
index 0000000..bd31ef3
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/542-watchdog-bcm47xx_wdt.c-rename-ops-methods.patch
@@ -0,0 +1,99 @@
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -30,7 +30,7 @@
+ #define DRV_NAME		"bcm47xx_wdt"
+ 
+ #define WDT_DEFAULT_TIME	30	/* seconds */
+-#define WDT_MAX_TIME		255	/* seconds */
++#define WDT_SOFTTIMER_MAX	255	/* seconds */
+ 
+ static int wdt_time = WDT_DEFAULT_TIME;
+ static bool nowayout = WATCHDOG_NOWAYOUT;
+@@ -49,7 +49,7 @@ static inline struct bcm47xx_wdt *bcm47x
+ 	return container_of(wdd, struct bcm47xx_wdt, wdd);
+ }
+ 
+-static void bcm47xx_timer_tick(unsigned long data)
++static void bcm47xx_wdt_soft_timer_tick(unsigned long data)
+ {
+ 	struct bcm47xx_wdt *wdt = (struct bcm47xx_wdt *)data;
+ 	u32 next_tick = min(wdt->wdd.timeout * 1000, wdt->max_timer_ms);
+@@ -62,7 +62,7 @@ static void bcm47xx_timer_tick(unsigned
+ 	}
+ }
+ 
+-static int bcm47xx_wdt_keepalive(struct watchdog_device *wdd)
++static int bcm47xx_wdt_soft_keepalive(struct watchdog_device *wdd)
+ {
+ 	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+ 
+@@ -71,17 +71,17 @@ static int bcm47xx_wdt_keepalive(struct
+ 	return 0;
+ }
+ 
+-static int bcm47xx_wdt_start(struct watchdog_device *wdd)
++static int bcm47xx_wdt_soft_start(struct watchdog_device *wdd)
+ {
+ 	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+ 
+-	bcm47xx_wdt_keepalive(wdd);
+-	bcm47xx_timer_tick((unsigned long)wdt);
++	bcm47xx_wdt_soft_keepalive(wdd);
++	bcm47xx_wdt_soft_timer_tick((unsigned long)wdt);
+ 
+ 	return 0;
+ }
+ 
+-static int bcm47xx_wdt_stop(struct watchdog_device *wdd)
++static int bcm47xx_wdt_soft_stop(struct watchdog_device *wdd)
+ {
+ 	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
+ 
+@@ -91,12 +91,12 @@ static int bcm47xx_wdt_stop(struct watch
+ 	return 0;
+ }
+ 
+-static int bcm47xx_wdt_set_timeout(struct watchdog_device *wdd,
+-				   unsigned int new_time)
++static int bcm47xx_wdt_soft_set_timeout(struct watchdog_device *wdd,
++					unsigned int new_time)
+ {
+-	if (new_time < 1 || new_time > WDT_MAX_TIME) {
++	if (new_time < 1 || new_time > WDT_SOFTTIMER_MAX) {
+ 		pr_warn("timeout value must be 1<=x<=%d, using %d\n",
+-			WDT_MAX_TIME, new_time);
++			WDT_SOFTTIMER_MAX, new_time);
+ 		return -EINVAL;
+ 	}
+ 
+@@ -122,12 +122,12 @@ static int bcm47xx_wdt_notify_sys(struct
+ 	return NOTIFY_DONE;
+ }
+ 
+-static struct watchdog_ops bcm47xx_wdt_ops = {
++static struct watchdog_ops bcm47xx_wdt_soft_ops = {
+ 	.owner		= THIS_MODULE,
+-	.start		= bcm47xx_wdt_start,
+-	.stop		= bcm47xx_wdt_stop,
+-	.ping		= bcm47xx_wdt_keepalive,
+-	.set_timeout	= bcm47xx_wdt_set_timeout,
++	.start		= bcm47xx_wdt_soft_start,
++	.stop		= bcm47xx_wdt_soft_stop,
++	.ping		= bcm47xx_wdt_soft_keepalive,
++	.set_timeout	= bcm47xx_wdt_soft_set_timeout,
+ };
+ 
+ static int bcm47xx_wdt_probe(struct platform_device *pdev)
+@@ -138,10 +138,10 @@ static int bcm47xx_wdt_probe(struct plat
+ 	if (!wdt)
+ 		return -ENXIO;
+ 
+-	setup_timer(&wdt->soft_timer, bcm47xx_timer_tick,
++	setup_timer(&wdt->soft_timer, bcm47xx_wdt_soft_timer_tick,
+ 		    (long unsigned int)wdt);
+ 
+-	wdt->wdd.ops = &bcm47xx_wdt_ops;
++	wdt->wdd.ops = &bcm47xx_wdt_soft_ops;
+ 	wdt->wdd.info = &bcm47xx_wdt_info;
+ 	wdt->wdd.timeout = WDT_DEFAULT_TIME;
+ 	ret = wdt->wdd.ops->set_timeout(&wdt->wdd, timeout);
diff --git a/target/linux/brcm47xx/patches-3.8/543-watchdog-bcm47xx_wdt.c-rename-wdt_time-to-timeout.patch b/target/linux/brcm47xx/patches-3.8/543-watchdog-bcm47xx_wdt.c-rename-wdt_time-to-timeout.patch
new file mode 100644
index 0000000..f6dc76b
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/543-watchdog-bcm47xx_wdt.c-rename-wdt_time-to-timeout.patch
@@ -0,0 +1,26 @@
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -32,11 +32,11 @@
+ #define WDT_DEFAULT_TIME	30	/* seconds */
+ #define WDT_SOFTTIMER_MAX	255	/* seconds */
+ 
+-static int wdt_time = WDT_DEFAULT_TIME;
++static int timeout = WDT_DEFAULT_TIME;
+ static bool nowayout = WATCHDOG_NOWAYOUT;
+ 
+-module_param(wdt_time, int, 0);
+-MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default="
++module_param(timeout, int, 0);
++MODULE_PARM_DESC(timeout, "Watchdog time in seconds. (default="
+ 				__MODULE_STRING(WDT_DEFAULT_TIME) ")");
+ 
+ module_param(nowayout, bool, 0);
+@@ -160,7 +160,7 @@ static int bcm47xx_wdt_probe(struct plat
+ 		goto err_notifier;
+ 
+ 	pr_info("BCM47xx Watchdog Timer enabled (%d seconds%s)\n",
+-		wdt_time, nowayout ? ", nowayout" : "");
++		timeout, nowayout ? ", nowayout" : "");
+ 	return 0;
+ 
+ err_notifier:
diff --git a/target/linux/brcm47xx/patches-3.8/544-watchdog-bcm47xx_wdt.c-add-hard-timer.patch b/target/linux/brcm47xx/patches-3.8/544-watchdog-bcm47xx_wdt.c-add-hard-timer.patch
new file mode 100644
index 0000000..5b0b9a8
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/544-watchdog-bcm47xx_wdt.c-add-hard-timer.patch
@@ -0,0 +1,110 @@
+--- a/drivers/watchdog/bcm47xx_wdt.c
++++ b/drivers/watchdog/bcm47xx_wdt.c
+@@ -31,6 +31,7 @@
+ 
+ #define WDT_DEFAULT_TIME	30	/* seconds */
+ #define WDT_SOFTTIMER_MAX	255	/* seconds */
++#define WDT_SOFTTIMER_THRESHOLD	60	/* seconds */
+ 
+ static int timeout = WDT_DEFAULT_TIME;
+ static bool nowayout = WATCHDOG_NOWAYOUT;
+@@ -49,6 +50,53 @@ static inline struct bcm47xx_wdt *bcm47x
+ 	return container_of(wdd, struct bcm47xx_wdt, wdd);
+ }
+ 
++static int bcm47xx_wdt_hard_keepalive(struct watchdog_device *wdd)
++{
++	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
++
++	wdt->timer_set_ms(wdt, wdd->timeout * 1000);
++
++	return 0;
++}
++
++static int bcm47xx_wdt_hard_start(struct watchdog_device *wdd)
++{
++	return 0;
++}
++
++static int bcm47xx_wdt_hard_stop(struct watchdog_device *wdd)
++{
++	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
++
++	wdt->timer_set(wdt, 0);
++
++	return 0;
++}
++
++static int bcm47xx_wdt_hard_set_timeout(struct watchdog_device *wdd,
++					unsigned int new_time)
++{
++	struct bcm47xx_wdt *wdt = bcm47xx_wdt_get(wdd);
++	u32 max_timer = wdt->max_timer_ms;
++
++	if (new_time < 1 || new_time > max_timer / 1000) {
++		pr_warn("timeout value must be 1<=x<=%d, using %d\n",
++			max_timer / 1000, new_time);
++		return -EINVAL;
++	}
++
++	wdd->timeout = new_time;
++	return 0;
++}
++
++static struct watchdog_ops bcm47xx_wdt_hard_ops = {
++	.owner		= THIS_MODULE,
++	.start		= bcm47xx_wdt_hard_start,
++	.stop		= bcm47xx_wdt_hard_stop,
++	.ping		= bcm47xx_wdt_hard_keepalive,
++	.set_timeout	= bcm47xx_wdt_hard_set_timeout,
++};
++
+ static void bcm47xx_wdt_soft_timer_tick(unsigned long data)
+ {
+ 	struct bcm47xx_wdt *wdt = (struct bcm47xx_wdt *)data;
+@@ -133,15 +181,22 @@ static struct watchdog_ops bcm47xx_wdt_s
+ static int bcm47xx_wdt_probe(struct platform_device *pdev)
+ {
+ 	int ret;
++	bool soft;
+ 	struct bcm47xx_wdt *wdt = dev_get_platdata(&pdev->dev);
+ 
+ 	if (!wdt)
+ 		return -ENXIO;
+ 
+-	setup_timer(&wdt->soft_timer, bcm47xx_wdt_soft_timer_tick,
+-		    (long unsigned int)wdt);
++	soft = wdt->max_timer_ms < WDT_SOFTTIMER_THRESHOLD * 1000;
++
++	if (soft) {
++		wdt->wdd.ops = &bcm47xx_wdt_soft_ops;
++		setup_timer(&wdt->soft_timer, bcm47xx_wdt_soft_timer_tick,
++			    (long unsigned int)wdt);
++	} else {
++		wdt->wdd.ops = &bcm47xx_wdt_hard_ops;
++	}
+ 
+-	wdt->wdd.ops = &bcm47xx_wdt_soft_ops;
+ 	wdt->wdd.info = &bcm47xx_wdt_info;
+ 	wdt->wdd.timeout = WDT_DEFAULT_TIME;
+ 	ret = wdt->wdd.ops->set_timeout(&wdt->wdd, timeout);
+@@ -159,14 +214,16 @@ static int bcm47xx_wdt_probe(struct plat
+ 	if (ret)
+ 		goto err_notifier;
+ 
+-	pr_info("BCM47xx Watchdog Timer enabled (%d seconds%s)\n",
+-		timeout, nowayout ? ", nowayout" : "");
++	dev_info(&pdev->dev, "BCM47xx Watchdog Timer enabled (%d seconds%s%s)\n",
++		timeout, nowayout ? ", nowayout" : "",
++		soft ? ", Software Timer" : "");
+ 	return 0;
+ 
+ err_notifier:
+ 	unregister_reboot_notifier(&wdt->notifier);
+ err_timer:
+-	del_timer_sync(&wdt->soft_timer);
++	if (soft)
++		del_timer_sync(&wdt->soft_timer);
+ 
+ 	return ret;
+ }
diff --git a/target/linux/brcm47xx/patches-3.8/610-pci_ide_fix.patch b/target/linux/brcm47xx/patches-3.8/610-pci_ide_fix.patch
new file mode 100644
index 0000000..f254b20
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/610-pci_ide_fix.patch
@@ -0,0 +1,14 @@
+--- a/include/linux/ide.h
++++ b/include/linux/ide.h
+@@ -195,7 +195,11 @@ static inline void ide_std_init_ports(st
+ 	hw->io_ports.ctl_addr = ctl_addr;
+ }
+ 
++#if defined CONFIG_BCM47XX
++# define MAX_HWIFS	2
++#else
+ #define MAX_HWIFS	10
++#endif
+ 
+ /*
+  * Now for the data we need to maintain per-drive:  ide_drive_t
diff --git a/target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch
new file mode 100644
index 0000000..9ea39d8
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/700-ssb-gigabit-ethernet-driver.patch
@@ -0,0 +1,387 @@
+--- a/drivers/net/ethernet/broadcom/tg3.c
++++ b/drivers/net/ethernet/broadcom/tg3.c
+@@ -44,6 +44,7 @@
+ #include <linux/prefetch.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/firmware.h>
++#include <linux/ssb/ssb_driver_gige.h>
+ #include <linux/hwmon.h>
+ #include <linux/hwmon-sysfs.h>
+ 
+@@ -263,6 +264,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_t
+ 			TG3_DRV_DATA_FLAG_5705_10_100},
+ 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5721)},
+ 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5722)},
++	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5750)},
+ 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751)},
+ 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751M)},
+ 	{PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5751F),
+@@ -570,7 +572,9 @@ static void _tw32_flush(struct tg3 *tp,
+ static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
+ {
+ 	tp->write32_mbox(tp, off, val);
+-	if (!tg3_flag(tp, MBOX_WRITE_REORDER) && !tg3_flag(tp, ICH_WORKAROUND))
++	if (tg3_flag(tp, FLUSH_POSTED_WRITES) ||
++	    (!tg3_flag(tp, MBOX_WRITE_REORDER) &&
++	     !tg3_flag(tp, ICH_WORKAROUND)))
+ 		tp->read32_mbox(tp, off);
+ }
+ 
+@@ -580,7 +584,8 @@ static void tg3_write32_tx_mbox(struct t
+ 	writel(val, mbox);
+ 	if (tg3_flag(tp, TXD_MBOX_HWBUG))
+ 		writel(val, mbox);
+-	if (tg3_flag(tp, MBOX_WRITE_REORDER))
++	if (tg3_flag(tp, MBOX_WRITE_REORDER) ||
++	    tg3_flag(tp, FLUSH_POSTED_WRITES))
+ 		readl(mbox);
+ }
+ 
+@@ -1088,7 +1093,8 @@ static void tg3_switch_clocks(struct tg3
+ 
+ #define PHY_BUSY_LOOPS	5000
+ 
+-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
++static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg,
++			 u32 *val)
+ {
+ 	u32 frame_val;
+ 	unsigned int loops;
+@@ -1104,7 +1110,7 @@ static int tg3_readphy(struct tg3 *tp, i
+ 
+ 	*val = 0x0;
+ 
+-	frame_val  = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
++	frame_val  = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ 		      MI_COM_PHY_ADDR_MASK);
+ 	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
+ 		      MI_COM_REG_ADDR_MASK);
+@@ -1141,7 +1147,13 @@ static int tg3_readphy(struct tg3 *tp, i
+ 	return ret;
+ }
+ 
+-static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
++static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
++{
++	return __tg3_readphy(tp, tp->phy_addr, reg, val);
++}
++
++static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg,
++			  u32 val)
+ {
+ 	u32 frame_val;
+ 	unsigned int loops;
+@@ -1159,7 +1171,7 @@ static int tg3_writephy(struct tg3 *tp,
+ 
+ 	tg3_ape_lock(tp, tp->phy_ape_lock);
+ 
+-	frame_val  = ((tp->phy_addr << MI_COM_PHY_ADDR_SHIFT) &
++	frame_val  = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ 		      MI_COM_PHY_ADDR_MASK);
+ 	frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
+ 		      MI_COM_REG_ADDR_MASK);
+@@ -1194,6 +1206,11 @@ static int tg3_writephy(struct tg3 *tp,
+ 	return ret;
+ }
+ 
++static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
++{
++	return __tg3_writephy(tp, tp->phy_addr, reg, val);
++}
++
+ static int tg3_phy_cl45_write(struct tg3 *tp, u32 devad, u32 addr, u32 val)
+ {
+ 	int err;
+@@ -1778,6 +1795,11 @@ static int tg3_poll_fw(struct tg3 *tp)
+ 	int i;
+ 	u32 val;
+ 
++	if (tg3_flag(tp, IS_SSB_CORE)) {
++		/* We don't use firmware. */
++		return 0;
++	}
++
+ 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ 		/* Wait up to 20ms for init done. */
+ 		for (i = 0; i < 200; i++) {
+@@ -3447,6 +3469,13 @@ static int tg3_halt_cpu(struct tg3 *tp,
+ 		tw32_f(offset + CPU_MODE,  CPU_MODE_HALT);
+ 		udelay(10);
+ 	} else {
++		/*
++		 * There is only an Rx CPU for the 5750 derivative in the
++		 * BCM4785.
++		 */
++		if (tg3_flag(tp, IS_SSB_CORE))
++			return 0;
++
+ 		for (i = 0; i < 10000; i++) {
+ 			tw32(offset + CPU_STATE, 0xffffffff);
+ 			tw32(offset + CPU_MODE,  CPU_MODE_HALT);
+@@ -3914,8 +3943,9 @@ static int tg3_power_down_prepare(struct
+ 	tg3_frob_aux_power(tp, true);
+ 
+ 	/* Workaround for unstable PLL clock */
+-	if ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
+-	    (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX)) {
++	if ((!tg3_flag(tp, IS_SSB_CORE)) &&
++	    ((GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_AX) ||
++	     (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5750_BX))) {
+ 		u32 val = tr32(0x7d00);
+ 
+ 		val &= ~((1 << 16) | (1 << 4) | (1 << 2) | (1 << 1) | 1);
+@@ -4435,6 +4465,15 @@ relink:
+ 	if (current_link_up == 0 || (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
+ 		tg3_phy_copper_begin(tp);
+ 
++		if (tg3_flag(tp, ROBOSWITCH)) {
++			current_link_up = 1;
++			/* FIXME: when BCM5325 switch is used use 100 MBit/s */
++			current_speed = SPEED_1000;
++			current_duplex = DUPLEX_FULL;
++			tp->link_config.active_speed = current_speed;
++			tp->link_config.active_duplex = current_duplex;
++		}
++
+ 		tg3_readphy(tp, MII_BMSR, &bmsr);
+ 		if ((!tg3_readphy(tp, MII_BMSR, &bmsr) && (bmsr & BMSR_LSTATUS)) ||
+ 		    (tp->mac_mode & MAC_MODE_PORT_INT_LPBACK))
+@@ -4453,6 +4492,26 @@ relink:
+ 	else
+ 		tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
+ 
++	/* In order for the 5750 core in BCM4785 chip to work properly
++	 * in RGMII mode, the Led Control Register must be set up.
++	 */
++	if (tg3_flag(tp, RGMII_MODE)) {
++		u32 led_ctrl = tr32(MAC_LED_CTRL);
++		led_ctrl &= ~(LED_CTRL_1000MBPS_ON | LED_CTRL_100MBPS_ON);
++
++		if (tp->link_config.active_speed == SPEED_10)
++			led_ctrl |= LED_CTRL_LNKLED_OVERRIDE;
++		else if (tp->link_config.active_speed == SPEED_100)
++			led_ctrl |= (LED_CTRL_LNKLED_OVERRIDE |
++				     LED_CTRL_100MBPS_ON);
++		else if (tp->link_config.active_speed == SPEED_1000)
++			led_ctrl |= (LED_CTRL_LNKLED_OVERRIDE |
++				     LED_CTRL_1000MBPS_ON);
++
++		tw32(MAC_LED_CTRL, led_ctrl);
++		udelay(40);
++	}
++
+ 	tp->mac_mode &= ~MAC_MODE_HALF_DUPLEX;
+ 	if (tp->link_config.active_duplex == DUPLEX_HALF)
+ 		tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
+@@ -8431,6 +8490,16 @@ static int tg3_chip_reset(struct tg3 *tp
+ 		tw32(0x5000, 0x400);
+ 	}
+ 
++	if (tg3_flag(tp, IS_SSB_CORE)) {
++		/*
++		 * BCM4785: In order to avoid repercussions from using
++		 * potentially defective internal ROM, stop the Rx RISC CPU,
++		 * which is not required.
++		 */
++		tg3_stop_fw(tp);
++		tg3_halt_cpu(tp, RX_CPU_BASE);
++	}
++
+ 	tw32(GRC_MODE, tp->grc_mode);
+ 
+ 	if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
+@@ -10064,6 +10133,11 @@ static void tg3_timer(unsigned long __op
+ 	    tg3_flag(tp, 57765_CLASS))
+ 		tg3_chk_missed_msi(tp);
+ 
++	if (tg3_flag(tp, FLUSH_POSTED_WRITES)) {
++		/* BCM4785: Flush posted writes from GbE to host memory. */
++		tr32(HOSTCC_MODE);
++	}
++
+ 	if (!tg3_flag(tp, TAGGED_STATUS)) {
+ 		/* All of this garbage is because when using non-tagged
+ 		 * IRQ status the mailbox/status_block protocol the chip
+@@ -12937,7 +13011,8 @@ static int tg3_ioctl(struct net_device *
+ 			return -EAGAIN;
+ 
+ 		spin_lock_bh(&tp->lock);
+-		err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
++		err = __tg3_readphy(tp, data->phy_id & 0x1f,
++				    data->reg_num & 0x1f, &mii_regval);
+ 		spin_unlock_bh(&tp->lock);
+ 
+ 		data->val_out = mii_regval;
+@@ -12953,7 +13028,8 @@ static int tg3_ioctl(struct net_device *
+ 			return -EAGAIN;
+ 
+ 		spin_lock_bh(&tp->lock);
+-		err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
++		err = __tg3_writephy(tp, data->phy_id & 0x1f,
++				     data->reg_num & 0x1f, data->val_in);
+ 		spin_unlock_bh(&tp->lock);
+ 
+ 		return err;
+@@ -13806,6 +13882,14 @@ static void tg3_get_5720_nvram_info(stru
+ /* Chips other than 5700/5701 use the NVRAM for fetching info. */
+ static void tg3_nvram_init(struct tg3 *tp)
+ {
++	if (tg3_flag(tp, IS_SSB_CORE)) {
++		/* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
++		tg3_flag_clear(tp, NVRAM);
++		tg3_flag_clear(tp, NVRAM_BUFFERED);
++		tg3_flag_set(tp, NO_NVRAM);
++		return;
++	}
++
+ 	tw32_f(GRC_EEPROM_ADDR,
+ 	     (EEPROM_ADDR_FSM_RESET |
+ 	      (EEPROM_DEFAULT_CLOCK_PERIOD <<
+@@ -14298,10 +14382,19 @@ static int tg3_phy_probe(struct tg3 *tp)
+ 			 * subsys device table.
+ 			 */
+ 			p = tg3_lookup_by_subsys(tp);
+-			if (!p)
++			if (p) {
++				tp->phy_id = p->phy_id;
++			} else if (!tg3_flag(tp, IS_SSB_CORE)) {
++				/* For now we saw the IDs 0xbc050cd0,
++				 * 0xbc050f80 and 0xbc050c30 on devices
++				 * connected to an BCM4785 and there are
++				 * probably more. Just assume that the phy is
++				 * supported when it is connected to a SSB core
++				 * for now.
++				 */
+ 				return -ENODEV;
++			}
+ 
+-			tp->phy_id = p->phy_id;
+ 			if (!tp->phy_id ||
+ 			    tp->phy_id == TG3_PHY_ID_BCM8002)
+ 				tp->phy_flags |= TG3_PHYFLG_PHY_SERDES;
+@@ -15346,6 +15439,11 @@ static int tg3_get_invariants(struct tg3
+ 		}
+ 	}
+ 
++	if (tg3_flag(tp, FLUSH_POSTED_WRITES)) {
++		tp->write32_tx_mbox = tg3_write_flush_reg32;
++		tp->write32_rx_mbox = tg3_write_flush_reg32;
++	}
++
+ 	/* Get eeprom hw config before calling tg3_set_power_state().
+ 	 * In particular, the TG3_FLAG_IS_NIC flag must be
+ 	 * determined before calling tg3_set_power_state() so that
+@@ -15679,12 +15777,19 @@ static int tg3_get_device_address(struct
+ 	struct net_device *dev = tp->dev;
+ 	u32 hi, lo, mac_offset;
+ 	int addr_ok = 0;
++	int err;
+ 
+ #ifdef CONFIG_SPARC
+ 	if (!tg3_get_macaddr_sparc(tp))
+ 		return 0;
+ #endif
+ 
++	if (tg3_flag(tp, IS_SSB_CORE)) {
++		err = ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
++		if (!err && is_valid_ether_addr(&dev->dev_addr[0]))
++			return 0;
++	}
++
+ 	mac_offset = 0x7c;
+ 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704 ||
+ 	    tg3_flag(tp, 5780_CLASS)) {
+@@ -16045,6 +16150,8 @@ static int tg3_test_dma(struct tg3 *tp)
+ 			tp->dma_rwctrl |= 0x001b000f;
+ 		}
+ 	}
++	if (tg3_flag(tp, ONE_DMA_AT_ONCE))
++		tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA;
+ 
+ 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 ||
+ 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704)
+@@ -16389,6 +16496,18 @@ static int tg3_init_one(struct pci_dev *
+ 	else
+ 		tp->msg_enable = TG3_DEF_MSG_ENABLE;
+ 
++	if (pdev_is_ssb_gige_core(pdev)) {
++		tg3_flag_set(tp, IS_SSB_CORE);
++		if (ssb_gige_must_flush_posted_writes(pdev))
++			tg3_flag_set(tp, FLUSH_POSTED_WRITES);
++		if (ssb_gige_one_dma_at_once(pdev))
++			tg3_flag_set(tp, ONE_DMA_AT_ONCE);
++		if (ssb_gige_have_roboswitch(pdev))
++			tg3_flag_set(tp, ROBOSWITCH);
++		if (ssb_gige_is_rgmii(pdev))
++			tg3_flag_set(tp, RGMII_MODE);
++	}
++
+ 	/* The word/byte swap controls here control register access byte
+ 	 * swapping.  DMA data byte swapping is controlled in the GRC_MODE
+ 	 * setting below.
+--- a/drivers/net/ethernet/broadcom/tg3.h
++++ b/drivers/net/ethernet/broadcom/tg3.h
+@@ -3030,6 +3030,11 @@ enum TG3_FLAGS {
+ 	TG3_FLAG_57765_PLUS,
+ 	TG3_FLAG_57765_CLASS,
+ 	TG3_FLAG_5717_PLUS,
++	TG3_FLAG_IS_SSB_CORE,
++	TG3_FLAG_FLUSH_POSTED_WRITES,
++	TG3_FLAG_ROBOSWITCH,
++	TG3_FLAG_ONE_DMA_AT_ONCE,
++	TG3_FLAG_RGMII_MODE,
+ 
+ 	/* Add new flags before this comment and TG3_FLAG_NUMBER_OF_FLAGS */
+ 	TG3_FLAG_NUMBER_OF_FLAGS,	/* Last entry in enum TG3_FLAGS */
+--- a/include/linux/pci_ids.h
++++ b/include/linux/pci_ids.h
+@@ -2127,6 +2127,7 @@
+ #define PCI_DEVICE_ID_TIGON3_5754M	0x1672
+ #define PCI_DEVICE_ID_TIGON3_5755M	0x1673
+ #define PCI_DEVICE_ID_TIGON3_5756	0x1674
++#define PCI_DEVICE_ID_TIGON3_5750	0x1676
+ #define PCI_DEVICE_ID_TIGON3_5751	0x1677
+ #define PCI_DEVICE_ID_TIGON3_5715	0x1678
+ #define PCI_DEVICE_ID_TIGON3_5715S	0x1679
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -97,21 +97,16 @@ static inline bool ssb_gige_must_flush_p
+ 	return 0;
+ }
+ 
+-#ifdef CONFIG_BCM47XX
+-#include <bcm47xx_nvram.h>
+ /* Get the device MAC address */
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+-{
+-	char buf[20];
+-	if (bcm47xx_nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+-		return;
+-	bcm47xx_nvram_parse_macaddr(buf, macaddr);
+-}
+-#else
+-static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+ {
++	struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++	if (!dev)
++		return -ENODEV;
++
++	memcpy(macaddr, dev->dev->bus->sprom.et0mac, 6);
++	return 0;
+ }
+-#endif
+ 
+ extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
+ 					  struct pci_dev *pdev);
+@@ -175,6 +170,10 @@ static inline bool ssb_gige_must_flush_p
+ {
+ 	return 0;
+ }
++static inline int ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++{
++	return -ENODEV;
++}
+ 
+ #endif /* CONFIG_SSB_DRIVER_GIGE */
+ #endif /* LINUX_SSB_DRIVER_GIGE_H_ */
diff --git a/target/linux/brcm47xx/patches-3.8/720-eth-backport.patch b/target/linux/brcm47xx/patches-3.8/720-eth-backport.patch
new file mode 100644
index 0000000..98da18a
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/720-eth-backport.patch
@@ -0,0 +1,94 @@
+commit fa0879e37b59e8e3f130a30a9e6fa515717c5bdd
+Author: Stefan Hajnoczi <stefanha@gmail.com>
+Date:   Mon Jan 21 01:17:22 2013 +0000
+
+    net: split eth_mac_addr for better error handling
+    
+    When we set mac address, software mac address in system and hardware mac
+    address all need to be updated. Current eth_mac_addr() doesn't allow
+    callers to implement error handling nicely.
+    
+    This patch split eth_mac_addr() to prepare part and real commit part,
+    then we can prepare first, and try to change hardware address, then do
+    the real commit if hardware address is set successfully.
+    
+    Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
+    Signed-off-by: Amos Kong <akong@redhat.com>
+    Signed-off-by: David S. Miller <davem@davemloft.net>
+
+--- a/include/linux/etherdevice.h
++++ b/include/linux/etherdevice.h
+@@ -40,6 +40,8 @@ extern int eth_header_cache(const struct
+ extern void eth_header_cache_update(struct hh_cache *hh,
+ 				    const struct net_device *dev,
+ 				    const unsigned char *haddr);
++extern int eth_prepare_mac_addr_change(struct net_device *dev, void *p);
++extern void eth_commit_mac_addr_change(struct net_device *dev, void *p);
+ extern int eth_mac_addr(struct net_device *dev, void *p);
+ extern int eth_change_mtu(struct net_device *dev, int new_mtu);
+ extern int eth_validate_addr(struct net_device *dev);
+--- a/net/ethernet/eth.c
++++ b/net/ethernet/eth.c
+@@ -278,16 +278,11 @@ void eth_header_cache_update(struct hh_c
+ EXPORT_SYMBOL(eth_header_cache_update);
+ 
+ /**
+- * eth_mac_addr - set new Ethernet hardware address
++ * eth_prepare_mac_addr_change - prepare for mac change
+  * @dev: network device
+  * @p: socket address
+- *
+- * Change hardware address of device.
+- *
+- * This doesn't change hardware matching, so needs to be overridden
+- * for most real devices.
+  */
+-int eth_mac_addr(struct net_device *dev, void *p)
++int eth_prepare_mac_addr_change(struct net_device *dev, void *p)
+ {
+ 	struct sockaddr *addr = p;
+ 
+@@ -295,9 +290,43 @@ int eth_mac_addr(struct net_device *dev,
+ 		return -EBUSY;
+ 	if (!is_valid_ether_addr(addr->sa_data))
+ 		return -EADDRNOTAVAIL;
++	return 0;
++}
++EXPORT_SYMBOL(eth_prepare_mac_addr_change);
++
++/**
++ * eth_commit_mac_addr_change - commit mac change
++ * @dev: network device
++ * @p: socket address
++ */
++void eth_commit_mac_addr_change(struct net_device *dev, void *p)
++{
++	struct sockaddr *addr = p;
++
+ 	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+ 	/* if device marked as NET_ADDR_RANDOM, reset it */
+ 	dev->addr_assign_type &= ~NET_ADDR_RANDOM;
++}
++EXPORT_SYMBOL(eth_commit_mac_addr_change);
++
++/**
++ * eth_mac_addr - set new Ethernet hardware address
++ * @dev: network device
++ * @p: socket address
++ *
++ * Change hardware address of device.
++ *
++ * This doesn't change hardware matching, so needs to be overridden
++ * for most real devices.
++ */
++int eth_mac_addr(struct net_device *dev, void *p)
++{
++	int ret;
++
++	ret = eth_prepare_mac_addr_change(dev, p);
++	if (ret < 0)
++		return ret;
++	eth_commit_mac_addr_change(dev, p);
+ 	return 0;
+ }
+ EXPORT_SYMBOL(eth_mac_addr);
diff --git a/target/linux/brcm47xx/patches-3.8/750-bgmac.patch b/target/linux/brcm47xx/patches-3.8/750-bgmac.patch
new file mode 100644
index 0000000..7ca2750
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/750-bgmac.patch
@@ -0,0 +1,1978 @@
+From dd4544f05469aaaeee891d7dc54d66430344321e Mon Sep 17 00:00:00 2001
+From: =?utf8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 8 Jan 2013 20:06:23 +0000
+Subject: [PATCH] bgmac: driver for GBit MAC core on BCMA bus
+MIME-Version: 1.0
+Content-Type: text/plain; charset=utf8
+Content-Transfer-Encoding: 8bit
+
+BCMA is a Broadcom specific bus with devices AKA cores. All recent BCMA
+based SoCs have gigabit ethernet provided by the GBit MAC core. This
+patch adds driver for such a cores registering itself as a netdev. It
+has been tested on a BCM4706 and BCM4718 chipsets.
+
+In the kernel tree there is already b44 driver which has some common
+things with bgmac, however there are many differences that has led to
+the decision or writing a new driver:
+1) GBit MAC cores appear on BCMA bus (not SSB as in case of b44)
+2) There is 64bit DMA engine which differs from 32bit one
+3) There is no CAM (Content Addressable Memory) in GBit MAC
+4) We have 4 TX queues on GBit MAC devices (instead of 1)
+5) Many registers have different addresses/values
+6) RX header flags are also different
+
+The driver in it's state is functional how, however there is of course
+place for improvements:
+1) Supporting more net_device_ops
+2) SUpporting more ethtool_ops
+3) Unaligned addressing in DMA
+4) Writing separated PHY driver
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/bcma/driver_chipcommon_pmu.c        |    3 +-
+ drivers/net/ethernet/broadcom/Kconfig       |    9 +
+ drivers/net/ethernet/broadcom/Makefile      |    1 +
+ drivers/net/ethernet/broadcom/bgmac.c       | 1422 +++++++++++++++++++++++++++
+ drivers/net/ethernet/broadcom/bgmac.h       |  456 +++++++++
+ include/linux/bcma/bcma_driver_chipcommon.h |    2 +
+ 6 files changed, 1892 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/net/ethernet/broadcom/bgmac.c
+ create mode 100644 drivers/net/ethernet/broadcom/bgmac.h
+
+--- a/drivers/bcma/driver_chipcommon_pmu.c
++++ b/drivers/bcma/driver_chipcommon_pmu.c
+@@ -264,7 +264,7 @@ static u32 bcma_pmu_pll_clock_bcm4706(st
+ }
+ 
+ /* query bus clock frequency for PMU-enabled chipcommon */
+-static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
++u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
+ {
+ 	struct bcma_bus *bus = cc->core->bus;
+ 
+@@ -293,6 +293,7 @@ static u32 bcma_pmu_get_bus_clock(struct
+ 	}
+ 	return BCMA_CC_PMU_HT_CLOCK;
+ }
++EXPORT_SYMBOL_GPL(bcma_pmu_get_bus_clock);
+ 
+ /* query cpu clock frequency for PMU-enabled chipcommon */
+ u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
+--- a/drivers/net/ethernet/broadcom/Kconfig
++++ b/drivers/net/ethernet/broadcom/Kconfig
+@@ -121,4 +121,13 @@ config BNX2X
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called bnx2x.  This is recommended.
+ 
++config BGMAC
++	tristate "BCMA bus GBit core support"
++	depends on BCMA_HOST_SOC && HAS_DMA
++	---help---
++	  This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
++	  They can be found on BCM47xx SoCs and provide gigabit ethernet.
++	  In case of using this driver on BCM4706 it's also requires to enable
++	  BCMA_DRIVER_GMAC_CMN to make it work.
++
+ endif # NET_VENDOR_BROADCOM
+--- a/drivers/net/ethernet/broadcom/Makefile
++++ b/drivers/net/ethernet/broadcom/Makefile
+@@ -9,3 +9,4 @@ obj-$(CONFIG_CNIC) += cnic.o
+ obj-$(CONFIG_BNX2X) += bnx2x/
+ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
+ obj-$(CONFIG_TIGON3) += tg3.o
++obj-$(CONFIG_BGMAC) += bgmac.o
+--- /dev/null
++++ b/drivers/net/ethernet/broadcom/bgmac.c
+@@ -0,0 +1,1422 @@
++/*
++ * Driver for (BCM4706)? GBit MAC core on BCMA bus.
++ *
++ * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include "bgmac.h"
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/etherdevice.h>
++#include <linux/mii.h>
++#include <linux/interrupt.h>
++#include <linux/dma-mapping.h>
++#include <bcm47xx_nvram.h>
++
++static const struct bcma_device_id bgmac_bcma_tbl[] = {
++	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
++	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
++	BCMA_CORETABLE_END
++};
++MODULE_DEVICE_TABLE(bcma, bgmac_bcma_tbl);
++
++static bool bgmac_wait_value(struct bcma_device *core, u16 reg, u32 mask,
++			     u32 value, int timeout)
++{
++	u32 val;
++	int i;
++
++	for (i = 0; i < timeout / 10; i++) {
++		val = bcma_read32(core, reg);
++		if ((val & mask) == value)
++			return true;
++		udelay(10);
++	}
++	pr_err("Timeout waiting for reg 0x%X\n", reg);
++	return false;
++}
++
++/**************************************************
++ * DMA
++ **************************************************/
++
++static void bgmac_dma_tx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
++{
++	u32 val;
++	int i;
++
++	if (!ring->mmio_base)
++		return;
++
++	/* Suspend DMA TX ring first.
++	 * bgmac_wait_value doesn't support waiting for any of few values, so
++	 * implement whole loop here.
++	 */
++	bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL,
++		    BGMAC_DMA_TX_SUSPEND);
++	for (i = 0; i < 10000 / 10; i++) {
++		val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
++		val &= BGMAC_DMA_TX_STAT;
++		if (val == BGMAC_DMA_TX_STAT_DISABLED ||
++		    val == BGMAC_DMA_TX_STAT_IDLEWAIT ||
++		    val == BGMAC_DMA_TX_STAT_STOPPED) {
++			i = 0;
++			break;
++		}
++		udelay(10);
++	}
++	if (i)
++		bgmac_err(bgmac, "Timeout suspending DMA TX ring 0x%X (BGMAC_DMA_TX_STAT: 0x%08X)\n",
++			  ring->mmio_base, val);
++
++	/* Remove SUSPEND bit */
++	bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, 0);
++	if (!bgmac_wait_value(bgmac->core,
++			      ring->mmio_base + BGMAC_DMA_TX_STATUS,
++			      BGMAC_DMA_TX_STAT, BGMAC_DMA_TX_STAT_DISABLED,
++			      10000)) {
++		bgmac_warn(bgmac, "DMA TX ring 0x%X wasn't disabled on time, waiting additional 300us\n",
++			   ring->mmio_base);
++		udelay(300);
++		val = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
++		if ((val & BGMAC_DMA_TX_STAT) != BGMAC_DMA_TX_STAT_DISABLED)
++			bgmac_err(bgmac, "Reset of DMA TX ring 0x%X failed\n",
++				  ring->mmio_base);
++	}
++}
++
++static void bgmac_dma_tx_enable(struct bgmac *bgmac,
++				struct bgmac_dma_ring *ring)
++{
++	u32 ctl;
++
++	ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL);
++	ctl |= BGMAC_DMA_TX_ENABLE;
++	ctl |= BGMAC_DMA_TX_PARITY_DISABLE;
++	bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_CTL, ctl);
++}
++
++static netdev_tx_t bgmac_dma_tx_add(struct bgmac *bgmac,
++				    struct bgmac_dma_ring *ring,
++				    struct sk_buff *skb)
++{
++	struct device *dma_dev = bgmac->core->dma_dev;
++	struct net_device *net_dev = bgmac->net_dev;
++	struct bgmac_dma_desc *dma_desc;
++	struct bgmac_slot_info *slot;
++	u32 ctl0, ctl1;
++	int free_slots;
++
++	if (skb->len > BGMAC_DESC_CTL1_LEN) {
++		bgmac_err(bgmac, "Too long skb (%d)\n", skb->len);
++		goto err_stop_drop;
++	}
++
++	if (ring->start <= ring->end)
++		free_slots = ring->start - ring->end + BGMAC_TX_RING_SLOTS;
++	else
++		free_slots = ring->start - ring->end;
++	if (free_slots == 1) {
++		bgmac_err(bgmac, "TX ring is full, queue should be stopped!\n");
++		netif_stop_queue(net_dev);
++		return NETDEV_TX_BUSY;
++	}
++
++	slot = &ring->slots[ring->end];
++	slot->skb = skb;
++	slot->dma_addr = dma_map_single(dma_dev, skb->data, skb->len,
++					DMA_TO_DEVICE);
++	if (dma_mapping_error(dma_dev, slot->dma_addr)) {
++		bgmac_err(bgmac, "Mapping error of skb on ring 0x%X\n",
++			  ring->mmio_base);
++		goto err_stop_drop;
++	}
++
++	ctl0 = BGMAC_DESC_CTL0_IOC | BGMAC_DESC_CTL0_SOF | BGMAC_DESC_CTL0_EOF;
++	if (ring->end == ring->num_slots - 1)
++		ctl0 |= BGMAC_DESC_CTL0_EOT;
++	ctl1 = skb->len & BGMAC_DESC_CTL1_LEN;
++
++	dma_desc = ring->cpu_base;
++	dma_desc += ring->end;
++	dma_desc->addr_low = cpu_to_le32(lower_32_bits(slot->dma_addr));
++	dma_desc->addr_high = cpu_to_le32(upper_32_bits(slot->dma_addr));
++	dma_desc->ctl0 = cpu_to_le32(ctl0);
++	dma_desc->ctl1 = cpu_to_le32(ctl1);
++
++	wmb();
++
++	/* Increase ring->end to point empty slot. We tell hardware the first
++	 * slot it should *not* read.
++	 */
++	if (++ring->end >= BGMAC_TX_RING_SLOTS)
++		ring->end = 0;
++	bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_INDEX,
++		    ring->end * sizeof(struct bgmac_dma_desc));
++
++	/* Always keep one slot free to allow detecting bugged calls. */
++	if (--free_slots == 1)
++		netif_stop_queue(net_dev);
++
++	return NETDEV_TX_OK;
++
++err_stop_drop:
++	netif_stop_queue(net_dev);
++	dev_kfree_skb(skb);
++	return NETDEV_TX_OK;
++}
++
++/* Free transmitted packets */
++static void bgmac_dma_tx_free(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
++{
++	struct device *dma_dev = bgmac->core->dma_dev;
++	int empty_slot;
++	bool freed = false;
++
++	/* The last slot that hardware didn't consume yet */
++	empty_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_STATUS);
++	empty_slot &= BGMAC_DMA_TX_STATDPTR;
++	empty_slot /= sizeof(struct bgmac_dma_desc);
++
++	while (ring->start != empty_slot) {
++		struct bgmac_slot_info *slot = &ring->slots[ring->start];
++
++		if (slot->skb) {
++			/* Unmap no longer used buffer */
++			dma_unmap_single(dma_dev, slot->dma_addr,
++					 slot->skb->len, DMA_TO_DEVICE);
++			slot->dma_addr = 0;
++
++			/* Free memory! :) */
++			dev_kfree_skb(slot->skb);
++			slot->skb = NULL;
++		} else {
++			bgmac_err(bgmac, "Hardware reported transmission for empty TX ring slot %d! End of ring: %d\n",
++				  ring->start, ring->end);
++		}
++
++		if (++ring->start >= BGMAC_TX_RING_SLOTS)
++			ring->start = 0;
++		freed = true;
++	}
++
++	if (freed && netif_queue_stopped(bgmac->net_dev))
++		netif_wake_queue(bgmac->net_dev);
++}
++
++static void bgmac_dma_rx_reset(struct bgmac *bgmac, struct bgmac_dma_ring *ring)
++{
++	if (!ring->mmio_base)
++		return;
++
++	bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, 0);
++	if (!bgmac_wait_value(bgmac->core,
++			      ring->mmio_base + BGMAC_DMA_RX_STATUS,
++			      BGMAC_DMA_RX_STAT, BGMAC_DMA_RX_STAT_DISABLED,
++			      10000))
++		bgmac_err(bgmac, "Reset of ring 0x%X RX failed\n",
++			  ring->mmio_base);
++}
++
++static void bgmac_dma_rx_enable(struct bgmac *bgmac,
++				struct bgmac_dma_ring *ring)
++{
++	u32 ctl;
++
++	ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL);
++	ctl &= BGMAC_DMA_RX_ADDREXT_MASK;
++	ctl |= BGMAC_DMA_RX_ENABLE;
++	ctl |= BGMAC_DMA_RX_PARITY_DISABLE;
++	ctl |= BGMAC_DMA_RX_OVERFLOW_CONT;
++	ctl |= BGMAC_RX_FRAME_OFFSET << BGMAC_DMA_RX_FRAME_OFFSET_SHIFT;
++	bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL, ctl);
++}
++
++static int bgmac_dma_rx_skb_for_slot(struct bgmac *bgmac,
++				     struct bgmac_slot_info *slot)
++{
++	struct device *dma_dev = bgmac->core->dma_dev;
++	struct bgmac_rx_header *rx;
++
++	/* Alloc skb */
++	slot->skb = netdev_alloc_skb(bgmac->net_dev, BGMAC_RX_BUF_SIZE);
++	if (!slot->skb) {
++		bgmac_err(bgmac, "Allocation of skb failed!\n");
++		return -ENOMEM;
++	}
++
++	/* Poison - if everything goes fine, hardware will overwrite it */
++	rx = (struct bgmac_rx_header *)slot->skb->data;
++	rx->len = cpu_to_le16(0xdead);
++	rx->flags = cpu_to_le16(0xbeef);
++
++	/* Map skb for the DMA */
++	slot->dma_addr = dma_map_single(dma_dev, slot->skb->data,
++					BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
++	if (dma_mapping_error(dma_dev, slot->dma_addr)) {
++		bgmac_err(bgmac, "DMA mapping error\n");
++		return -ENOMEM;
++	}
++	if (slot->dma_addr & 0xC0000000)
++		bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
++
++	return 0;
++}
++
++static int bgmac_dma_rx_read(struct bgmac *bgmac, struct bgmac_dma_ring *ring,
++			     int weight)
++{
++	u32 end_slot;
++	int handled = 0;
++
++	end_slot = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_STATUS);
++	end_slot &= BGMAC_DMA_RX_STATDPTR;
++	end_slot /= sizeof(struct bgmac_dma_desc);
++
++	ring->end = end_slot;
++
++	while (ring->start != ring->end) {
++		struct device *dma_dev = bgmac->core->dma_dev;
++		struct bgmac_slot_info *slot = &ring->slots[ring->start];
++		struct sk_buff *skb = slot->skb;
++		struct sk_buff *new_skb;
++		struct bgmac_rx_header *rx;
++		u16 len, flags;
++
++		/* Unmap buffer to make it accessible to the CPU */
++		dma_sync_single_for_cpu(dma_dev, slot->dma_addr,
++					BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
++
++		/* Get info from the header */
++		rx = (struct bgmac_rx_header *)skb->data;
++		len = le16_to_cpu(rx->len);
++		flags = le16_to_cpu(rx->flags);
++
++		/* Check for poison and drop or pass the packet */
++		if (len == 0xdead && flags == 0xbeef) {
++			bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n",
++				  ring->start);
++		} else {
++			new_skb = netdev_alloc_skb(bgmac->net_dev, len);
++			if (new_skb) {
++				skb_put(new_skb, len);
++				skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET,
++								 new_skb->data,
++								 len);
++				new_skb->protocol =
++					eth_type_trans(new_skb, bgmac->net_dev);
++				netif_receive_skb(new_skb);
++				handled++;
++			} else {
++				bgmac->net_dev->stats.rx_dropped++;
++				bgmac_err(bgmac, "Allocation of skb for copying packet failed!\n");
++			}
++
++			/* Poison the old skb */
++			rx->len = cpu_to_le16(0xdead);
++			rx->flags = cpu_to_le16(0xbeef);
++		}
++
++		/* Make it back accessible to the hardware */
++		dma_sync_single_for_device(dma_dev, slot->dma_addr,
++					   BGMAC_RX_BUF_SIZE, DMA_FROM_DEVICE);
++
++		if (++ring->start >= BGMAC_RX_RING_SLOTS)
++			ring->start = 0;
++
++		if (handled >= weight) /* Should never be greater */
++			break;
++	}
++
++	return handled;
++}
++
++/* Does ring support unaligned addressing? */
++static bool bgmac_dma_unaligned(struct bgmac *bgmac,
++				struct bgmac_dma_ring *ring,
++				enum bgmac_dma_ring_type ring_type)
++{
++	switch (ring_type) {
++	case BGMAC_DMA_RING_TX:
++		bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO,
++			    0xff0);
++		if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO))
++			return true;
++		break;
++	case BGMAC_DMA_RING_RX:
++		bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO,
++			    0xff0);
++		if (bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO))
++			return true;
++		break;
++	}
++	return false;
++}
++
++static void bgmac_dma_ring_free(struct bgmac *bgmac,
++				struct bgmac_dma_ring *ring)
++{
++	struct device *dma_dev = bgmac->core->dma_dev;
++	struct bgmac_slot_info *slot;
++	int size;
++	int i;
++
++	for (i = 0; i < ring->num_slots; i++) {
++		slot = &ring->slots[i];
++		if (slot->skb) {
++			if (slot->dma_addr)
++				dma_unmap_single(dma_dev, slot->dma_addr,
++						 slot->skb->len, DMA_TO_DEVICE);
++			dev_kfree_skb(slot->skb);
++		}
++	}
++
++	if (ring->cpu_base) {
++		/* Free ring of descriptors */
++		size = ring->num_slots * sizeof(struct bgmac_dma_desc);
++		dma_free_coherent(dma_dev, size, ring->cpu_base,
++				  ring->dma_base);
++	}
++}
++
++static void bgmac_dma_free(struct bgmac *bgmac)
++{
++	int i;
++
++	for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
++		bgmac_dma_ring_free(bgmac, &bgmac->tx_ring[i]);
++	for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
++		bgmac_dma_ring_free(bgmac, &bgmac->rx_ring[i]);
++}
++
++static int bgmac_dma_alloc(struct bgmac *bgmac)
++{
++	struct device *dma_dev = bgmac->core->dma_dev;
++	struct bgmac_dma_ring *ring;
++	static const u16 ring_base[] = { BGMAC_DMA_BASE0, BGMAC_DMA_BASE1,
++					 BGMAC_DMA_BASE2, BGMAC_DMA_BASE3, };
++	int size; /* ring size: different for Tx and Rx */
++	int err;
++	int i;
++
++	BUILD_BUG_ON(BGMAC_MAX_TX_RINGS > ARRAY_SIZE(ring_base));
++	BUILD_BUG_ON(BGMAC_MAX_RX_RINGS > ARRAY_SIZE(ring_base));
++
++	if (!(bcma_aread32(bgmac->core, BCMA_IOST) & BCMA_IOST_DMA64)) {
++		bgmac_err(bgmac, "Core does not report 64-bit DMA\n");
++		return -ENOTSUPP;
++	}
++
++	for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
++		ring = &bgmac->tx_ring[i];
++		ring->num_slots = BGMAC_TX_RING_SLOTS;
++		ring->mmio_base = ring_base[i];
++		if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_TX))
++			bgmac_warn(bgmac, "TX on ring 0x%X supports unaligned addressing but this feature is not implemented\n",
++				   ring->mmio_base);
++
++		/* Alloc ring of descriptors */
++		size = ring->num_slots * sizeof(struct bgmac_dma_desc);
++		ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
++						     &ring->dma_base,
++						     GFP_KERNEL);
++		if (!ring->cpu_base) {
++			bgmac_err(bgmac, "Allocation of TX ring 0x%X failed\n",
++				  ring->mmio_base);
++			goto err_dma_free;
++		}
++		if (ring->dma_base & 0xC0000000)
++			bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
++
++		/* No need to alloc TX slots yet */
++	}
++
++	for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
++		ring = &bgmac->rx_ring[i];
++		ring->num_slots = BGMAC_RX_RING_SLOTS;
++		ring->mmio_base = ring_base[i];
++		if (bgmac_dma_unaligned(bgmac, ring, BGMAC_DMA_RING_RX))
++			bgmac_warn(bgmac, "RX on ring 0x%X supports unaligned addressing but this feature is not implemented\n",
++				   ring->mmio_base);
++
++		/* Alloc ring of descriptors */
++		size = ring->num_slots * sizeof(struct bgmac_dma_desc);
++		ring->cpu_base = dma_zalloc_coherent(dma_dev, size,
++						     &ring->dma_base,
++						     GFP_KERNEL);
++		if (!ring->cpu_base) {
++			bgmac_err(bgmac, "Allocation of RX ring 0x%X failed\n",
++				  ring->mmio_base);
++			err = -ENOMEM;
++			goto err_dma_free;
++		}
++		if (ring->dma_base & 0xC0000000)
++			bgmac_warn(bgmac, "DMA address using 0xC0000000 bit(s), it may need translation trick\n");
++
++		/* Alloc RX slots */
++		for (i = 0; i < ring->num_slots; i++) {
++			err = bgmac_dma_rx_skb_for_slot(bgmac, &ring->slots[i]);
++			if (err) {
++				bgmac_err(bgmac, "Can't allocate skb for slot in RX ring\n");
++				goto err_dma_free;
++			}
++		}
++	}
++
++	return 0;
++
++err_dma_free:
++	bgmac_dma_free(bgmac);
++	return -ENOMEM;
++}
++
++static void bgmac_dma_init(struct bgmac *bgmac)
++{
++	struct bgmac_dma_ring *ring;
++	struct bgmac_dma_desc *dma_desc;
++	u32 ctl0, ctl1;
++	int i;
++
++	for (i = 0; i < BGMAC_MAX_TX_RINGS; i++) {
++		ring = &bgmac->tx_ring[i];
++
++		/* We don't implement unaligned addressing, so enable first */
++		bgmac_dma_tx_enable(bgmac, ring);
++		bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGLO,
++			    lower_32_bits(ring->dma_base));
++		bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_TX_RINGHI,
++			    upper_32_bits(ring->dma_base));
++
++		ring->start = 0;
++		ring->end = 0;	/* Points the slot that should *not* be read */
++	}
++
++	for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
++		ring = &bgmac->rx_ring[i];
++
++		/* We don't implement unaligned addressing, so enable first */
++		bgmac_dma_rx_enable(bgmac, ring);
++		bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGLO,
++			    lower_32_bits(ring->dma_base));
++		bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_RINGHI,
++			    upper_32_bits(ring->dma_base));
++
++		for (i = 0, dma_desc = ring->cpu_base; i < ring->num_slots;
++		     i++, dma_desc++) {
++			ctl0 = ctl1 = 0;
++
++			if (i == ring->num_slots - 1)
++				ctl0 |= BGMAC_DESC_CTL0_EOT;
++			ctl1 |= BGMAC_RX_BUF_SIZE & BGMAC_DESC_CTL1_LEN;
++			/* Is there any BGMAC device that requires extension? */
++			/* ctl1 |= (addrext << B43_DMA64_DCTL1_ADDREXT_SHIFT) &
++			 * B43_DMA64_DCTL1_ADDREXT_MASK;
++			 */
++
++			dma_desc->addr_low = cpu_to_le32(lower_32_bits(ring->slots[i].dma_addr));
++			dma_desc->addr_high = cpu_to_le32(upper_32_bits(ring->slots[i].dma_addr));
++			dma_desc->ctl0 = cpu_to_le32(ctl0);
++			dma_desc->ctl1 = cpu_to_le32(ctl1);
++		}
++
++		bgmac_write(bgmac, ring->mmio_base + BGMAC_DMA_RX_INDEX,
++			    ring->num_slots * sizeof(struct bgmac_dma_desc));
++
++		ring->start = 0;
++		ring->end = 0;
++	}
++}
++
++/**************************************************
++ * PHY ops
++ **************************************************/
++
++u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg)
++{
++	struct bcma_device *core;
++	u16 phy_access_addr;
++	u16 phy_ctl_addr;
++	u32 tmp;
++
++	BUILD_BUG_ON(BGMAC_PA_DATA_MASK != BCMA_GMAC_CMN_PA_DATA_MASK);
++	BUILD_BUG_ON(BGMAC_PA_ADDR_MASK != BCMA_GMAC_CMN_PA_ADDR_MASK);
++	BUILD_BUG_ON(BGMAC_PA_ADDR_SHIFT != BCMA_GMAC_CMN_PA_ADDR_SHIFT);
++	BUILD_BUG_ON(BGMAC_PA_REG_MASK != BCMA_GMAC_CMN_PA_REG_MASK);
++	BUILD_BUG_ON(BGMAC_PA_REG_SHIFT != BCMA_GMAC_CMN_PA_REG_SHIFT);
++	BUILD_BUG_ON(BGMAC_PA_WRITE != BCMA_GMAC_CMN_PA_WRITE);
++	BUILD_BUG_ON(BGMAC_PA_START != BCMA_GMAC_CMN_PA_START);
++	BUILD_BUG_ON(BGMAC_PC_EPA_MASK != BCMA_GMAC_CMN_PC_EPA_MASK);
++	BUILD_BUG_ON(BGMAC_PC_MCT_MASK != BCMA_GMAC_CMN_PC_MCT_MASK);
++	BUILD_BUG_ON(BGMAC_PC_MCT_SHIFT != BCMA_GMAC_CMN_PC_MCT_SHIFT);
++	BUILD_BUG_ON(BGMAC_PC_MTE != BCMA_GMAC_CMN_PC_MTE);
++
++	if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
++		core = bgmac->core->bus->drv_gmac_cmn.core;
++		phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
++		phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
++	} else {
++		core = bgmac->core;
++		phy_access_addr = BGMAC_PHY_ACCESS;
++		phy_ctl_addr = BGMAC_PHY_CNTL;
++	}
++
++	tmp = bcma_read32(core, phy_ctl_addr);
++	tmp &= ~BGMAC_PC_EPA_MASK;
++	tmp |= phyaddr;
++	bcma_write32(core, phy_ctl_addr, tmp);
++
++	tmp = BGMAC_PA_START;
++	tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT;
++	tmp |= reg << BGMAC_PA_REG_SHIFT;
++	bcma_write32(core, phy_access_addr, tmp);
++
++	if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) {
++		bgmac_err(bgmac, "Reading PHY %d register 0x%X failed\n",
++			  phyaddr, reg);
++		return 0xffff;
++	}
++
++	return bcma_read32(core, phy_access_addr) & BGMAC_PA_DATA_MASK;
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */
++void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value)
++{
++	struct bcma_device *core;
++	u16 phy_access_addr;
++	u16 phy_ctl_addr;
++	u32 tmp;
++
++	if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT) {
++		core = bgmac->core->bus->drv_gmac_cmn.core;
++		phy_access_addr = BCMA_GMAC_CMN_PHY_ACCESS;
++		phy_ctl_addr = BCMA_GMAC_CMN_PHY_CTL;
++	} else {
++		core = bgmac->core;
++		phy_access_addr = BGMAC_PHY_ACCESS;
++		phy_ctl_addr = BGMAC_PHY_CNTL;
++	}
++
++	tmp = bcma_read32(core, phy_ctl_addr);
++	tmp &= ~BGMAC_PC_EPA_MASK;
++	tmp |= phyaddr;
++	bcma_write32(core, phy_ctl_addr, tmp);
++
++	bgmac_write(bgmac, BGMAC_INT_STATUS, BGMAC_IS_MDIO);
++	if (bgmac_read(bgmac, BGMAC_INT_STATUS) & BGMAC_IS_MDIO)
++		bgmac_warn(bgmac, "Error setting MDIO int\n");
++
++	tmp = BGMAC_PA_START;
++	tmp |= BGMAC_PA_WRITE;
++	tmp |= phyaddr << BGMAC_PA_ADDR_SHIFT;
++	tmp |= reg << BGMAC_PA_REG_SHIFT;
++	tmp |= value;
++	bcma_write32(core, phy_access_addr, tmp);
++
++	if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000))
++		bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n",
++			  phyaddr, reg);
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */
++static void bgmac_phy_force(struct bgmac *bgmac)
++{
++	u16 ctl;
++	u16 mask = ~(BGMAC_PHY_CTL_SPEED | BGMAC_PHY_CTL_SPEED_MSB |
++		     BGMAC_PHY_CTL_ANENAB | BGMAC_PHY_CTL_DUPLEX);
++
++	if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
++		return;
++
++	if (bgmac->autoneg)
++		return;
++
++	ctl = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL);
++	ctl &= mask;
++	if (bgmac->full_duplex)
++		ctl |= BGMAC_PHY_CTL_DUPLEX;
++	if (bgmac->speed == BGMAC_SPEED_100)
++		ctl |= BGMAC_PHY_CTL_SPEED_100;
++	else if (bgmac->speed == BGMAC_SPEED_1000)
++		ctl |= BGMAC_PHY_CTL_SPEED_1000;
++	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, ctl);
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyadvertise */
++static void bgmac_phy_advertise(struct bgmac *bgmac)
++{
++	u16 adv;
++
++	if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
++		return;
++
++	if (!bgmac->autoneg)
++		return;
++
++	/* Adv selected 10/100 speeds */
++	adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV);
++	adv &= ~(BGMAC_PHY_ADV_10HALF | BGMAC_PHY_ADV_10FULL |
++		 BGMAC_PHY_ADV_100HALF | BGMAC_PHY_ADV_100FULL);
++	if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
++		adv |= BGMAC_PHY_ADV_10HALF;
++	if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
++		adv |= BGMAC_PHY_ADV_100HALF;
++	if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_10)
++		adv |= BGMAC_PHY_ADV_10FULL;
++	if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_100)
++		adv |= BGMAC_PHY_ADV_100FULL;
++	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV, adv);
++
++	/* Adv selected 1000 speeds */
++	adv = bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2);
++	adv &= ~(BGMAC_PHY_ADV2_1000HALF | BGMAC_PHY_ADV2_1000FULL);
++	if (!bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
++		adv |= BGMAC_PHY_ADV2_1000HALF;
++	if (bgmac->full_duplex && bgmac->speed & BGMAC_SPEED_1000)
++		adv |= BGMAC_PHY_ADV2_1000FULL;
++	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_ADV2, adv);
++
++	/* Restart */
++	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
++			bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) |
++			BGMAC_PHY_CTL_RESTART);
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyinit */
++static void bgmac_phy_init(struct bgmac *bgmac)
++{
++	struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
++	struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
++	u8 i;
++
++	if (ci->id == BCMA_CHIP_ID_BCM5356) {
++		for (i = 0; i < 5; i++) {
++			bgmac_phy_write(bgmac, i, 0x1f, 0x008b);
++			bgmac_phy_write(bgmac, i, 0x15, 0x0100);
++			bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
++			bgmac_phy_write(bgmac, i, 0x12, 0x2aaa);
++			bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
++		}
++	}
++	if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg != 10) ||
++	    (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg != 10) ||
++	    (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg != 9)) {
++		bcma_chipco_chipctl_maskset(cc, 2, ~0xc0000000, 0);
++		bcma_chipco_chipctl_maskset(cc, 4, ~0x80000000, 0);
++		for (i = 0; i < 5; i++) {
++			bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
++			bgmac_phy_write(bgmac, i, 0x16, 0x5284);
++			bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
++			bgmac_phy_write(bgmac, i, 0x17, 0x0010);
++			bgmac_phy_write(bgmac, i, 0x1f, 0x000f);
++			bgmac_phy_write(bgmac, i, 0x16, 0x5296);
++			bgmac_phy_write(bgmac, i, 0x17, 0x1073);
++			bgmac_phy_write(bgmac, i, 0x17, 0x9073);
++			bgmac_phy_write(bgmac, i, 0x16, 0x52b6);
++			bgmac_phy_write(bgmac, i, 0x17, 0x9273);
++			bgmac_phy_write(bgmac, i, 0x1f, 0x000b);
++		}
++	}
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyreset */
++static void bgmac_phy_reset(struct bgmac *bgmac)
++{
++	if (bgmac->phyaddr == BGMAC_PHY_NOREGS)
++		return;
++
++	bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL,
++			BGMAC_PHY_CTL_RESET);
++	udelay(100);
++	if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) &
++	    BGMAC_PHY_CTL_RESET)
++		bgmac_err(bgmac, "PHY reset failed\n");
++	bgmac_phy_init(bgmac);
++}
++
++/**************************************************
++ * Chip ops
++ **************************************************/
++
++/* TODO: can we just drop @force? Can we don't reset MAC at all if there is
++ * nothing to change? Try if after stabilizng driver.
++ */
++static void bgmac_cmdcfg_maskset(struct bgmac *bgmac, u32 mask, u32 set,
++				 bool force)
++{
++	u32 cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
++	u32 new_val = (cmdcfg & mask) | set;
++
++	bgmac_set(bgmac, BGMAC_CMDCFG, BGMAC_CMDCFG_SR);
++	udelay(2);
++
++	if (new_val != cmdcfg || force)
++		bgmac_write(bgmac, BGMAC_CMDCFG, new_val);
++
++	bgmac_mask(bgmac, BGMAC_CMDCFG, ~BGMAC_CMDCFG_SR);
++	udelay(2);
++}
++
++#if 0 /* We don't use that regs yet */
++static void bgmac_chip_stats_update(struct bgmac *bgmac)
++{
++	int i;
++
++	if (bgmac->core->id.id != BCMA_CORE_4706_MAC_GBIT) {
++		for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++)
++			bgmac->mib_tx_regs[i] =
++				bgmac_read(bgmac,
++					   BGMAC_TX_GOOD_OCTETS + (i * 4));
++		for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++)
++			bgmac->mib_rx_regs[i] =
++				bgmac_read(bgmac,
++					   BGMAC_RX_GOOD_OCTETS + (i * 4));
++	}
++
++	/* TODO: what else? how to handle BCM4706? Specs are needed */
++}
++#endif
++
++static void bgmac_clear_mib(struct bgmac *bgmac)
++{
++	int i;
++
++	if (bgmac->core->id.id == BCMA_CORE_4706_MAC_GBIT)
++		return;
++
++	bgmac_set(bgmac, BGMAC_DEV_CTL, BGMAC_DC_MROR);
++	for (i = 0; i < BGMAC_NUM_MIB_TX_REGS; i++)
++		bgmac_read(bgmac, BGMAC_TX_GOOD_OCTETS + (i * 4));
++	for (i = 0; i < BGMAC_NUM_MIB_RX_REGS; i++)
++		bgmac_read(bgmac, BGMAC_RX_GOOD_OCTETS + (i * 4));
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_speed */
++static void bgmac_speed(struct bgmac *bgmac, int speed)
++{
++	u32 mask = ~(BGMAC_CMDCFG_ES_MASK | BGMAC_CMDCFG_HD);
++	u32 set = 0;
++
++	if (speed & BGMAC_SPEED_10)
++		set |= BGMAC_CMDCFG_ES_10;
++	if (speed & BGMAC_SPEED_100)
++		set |= BGMAC_CMDCFG_ES_100;
++	if (speed & BGMAC_SPEED_1000)
++		set |= BGMAC_CMDCFG_ES_1000;
++	if (!bgmac->full_duplex)
++		set |= BGMAC_CMDCFG_HD;
++	bgmac_cmdcfg_maskset(bgmac, mask, set, true);
++}
++
++static void bgmac_miiconfig(struct bgmac *bgmac)
++{
++	u8 imode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
++			BGMAC_DS_MM_SHIFT;
++	if (imode == 0 || imode == 1) {
++		if (bgmac->autoneg)
++			bgmac_speed(bgmac, BGMAC_SPEED_100);
++		else
++			bgmac_speed(bgmac, bgmac->speed);
++	}
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipreset */
++static void bgmac_chip_reset(struct bgmac *bgmac)
++{
++	struct bcma_device *core = bgmac->core;
++	struct bcma_bus *bus = core->bus;
++	struct bcma_chipinfo *ci = &bus->chipinfo;
++	u32 flags = 0;
++	u32 iost;
++	int i;
++
++	if (bcma_core_is_enabled(core)) {
++		if (!bgmac->stats_grabbed) {
++			/* bgmac_chip_stats_update(bgmac); */
++			bgmac->stats_grabbed = true;
++		}
++
++		for (i = 0; i < BGMAC_MAX_TX_RINGS; i++)
++			bgmac_dma_tx_reset(bgmac, &bgmac->tx_ring[i]);
++
++		bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false);
++		udelay(1);
++
++		for (i = 0; i < BGMAC_MAX_RX_RINGS; i++)
++			bgmac_dma_rx_reset(bgmac, &bgmac->rx_ring[i]);
++
++		/* TODO: Clear software multicast filter list */
++	}
++
++	iost = bcma_aread32(core, BCMA_IOST);
++	if ((ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 10) ||
++	    (ci->id == BCMA_CHIP_ID_BCM4749 && ci->pkg == 10) ||
++	    (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9))
++		iost &= ~BGMAC_BCMA_IOST_ATTACHED;
++
++	if (iost & BGMAC_BCMA_IOST_ATTACHED) {
++		flags = BGMAC_BCMA_IOCTL_SW_CLKEN;
++		if (!bgmac->has_robosw)
++			flags |= BGMAC_BCMA_IOCTL_SW_RESET;
++	}
++
++	bcma_core_enable(core, flags);
++
++	if (core->id.rev > 2) {
++		bgmac_set(bgmac, BCMA_CLKCTLST, 1 << 8);
++		bgmac_wait_value(bgmac->core, BCMA_CLKCTLST, 1 << 24, 1 << 24,
++				 1000);
++	}
++
++	if (ci->id == BCMA_CHIP_ID_BCM5357 || ci->id == BCMA_CHIP_ID_BCM4749 ||
++	    ci->id == BCMA_CHIP_ID_BCM53572) {
++		struct bcma_drv_cc *cc = &bgmac->core->bus->drv_cc;
++		u8 et_swtype = 0;
++		u8 sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHY |
++			     BGMAC_CHIPCTL_1_IF_TYPE_RMII;
++		char buf[2];
++
++		if (bcm47xx_nvram_getenv("et_swtype", buf, 1) > 0) {
++			if (kstrtou8(buf, 0, &et_swtype))
++				bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n",
++					  buf);
++			et_swtype &= 0x0f;
++			et_swtype <<= 4;
++			sw_type = et_swtype;
++		} else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) {
++			sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
++		} else if (0) {
++			/* TODO */
++		}
++		bcma_chipco_chipctl_maskset(cc, 1,
++					    ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
++					      BGMAC_CHIPCTL_1_SW_TYPE_MASK),
++					    sw_type);
++	}
++
++	if (iost & BGMAC_BCMA_IOST_ATTACHED && !bgmac->has_robosw)
++		bcma_awrite32(core, BCMA_IOCTL,
++			      bcma_aread32(core, BCMA_IOCTL) &
++			      ~BGMAC_BCMA_IOCTL_SW_RESET);
++
++	/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_reset
++	 * Specs don't say about using BGMAC_CMDCFG_SR, but in this routine
++	 * BGMAC_CMDCFG is read _after_ putting chip in a reset. So it has to
++	 * be keps until taking MAC out of the reset.
++	 */
++	bgmac_cmdcfg_maskset(bgmac,
++			     ~(BGMAC_CMDCFG_TE |
++			       BGMAC_CMDCFG_RE |
++			       BGMAC_CMDCFG_RPI |
++			       BGMAC_CMDCFG_TAI |
++			       BGMAC_CMDCFG_HD |
++			       BGMAC_CMDCFG_ML |
++			       BGMAC_CMDCFG_CFE |
++			       BGMAC_CMDCFG_RL |
++			       BGMAC_CMDCFG_RED |
++			       BGMAC_CMDCFG_PE |
++			       BGMAC_CMDCFG_TPI |
++			       BGMAC_CMDCFG_PAD_EN |
++			       BGMAC_CMDCFG_PF),
++			     BGMAC_CMDCFG_PROM |
++			     BGMAC_CMDCFG_NLC |
++			     BGMAC_CMDCFG_CFE |
++			     BGMAC_CMDCFG_SR,
++			     false);
++
++	bgmac_clear_mib(bgmac);
++	if (core->id.id == BCMA_CORE_4706_MAC_GBIT)
++		bcma_maskset32(bgmac->cmn, BCMA_GMAC_CMN_PHY_CTL, ~0,
++			       BCMA_GMAC_CMN_PC_MTE);
++	else
++		bgmac_set(bgmac, BGMAC_PHY_CNTL, BGMAC_PC_MTE);
++	bgmac_miiconfig(bgmac);
++	bgmac_phy_init(bgmac);
++
++	bgmac->int_status = 0;
++}
++
++static void bgmac_chip_intrs_on(struct bgmac *bgmac)
++{
++	bgmac_write(bgmac, BGMAC_INT_MASK, bgmac->int_mask);
++}
++
++static void bgmac_chip_intrs_off(struct bgmac *bgmac)
++{
++	bgmac_write(bgmac, BGMAC_INT_MASK, 0);
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */
++static void bgmac_enable(struct bgmac *bgmac)
++{
++	struct bcma_chipinfo *ci = &bgmac->core->bus->chipinfo;
++	u32 cmdcfg;
++	u32 mode;
++	u32 rxq_ctl;
++	u32 fl_ctl;
++	u16 bp_clk;
++	u8 mdp;
++
++	cmdcfg = bgmac_read(bgmac, BGMAC_CMDCFG);
++	bgmac_cmdcfg_maskset(bgmac, ~(BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE),
++			     BGMAC_CMDCFG_SR, true);
++	udelay(2);
++	cmdcfg |= BGMAC_CMDCFG_TE | BGMAC_CMDCFG_RE;
++	bgmac_write(bgmac, BGMAC_CMDCFG, cmdcfg);
++
++	mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >>
++		BGMAC_DS_MM_SHIFT;
++	if (ci->id != BCMA_CHIP_ID_BCM47162 || mode != 0)
++		bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
++	if (ci->id == BCMA_CHIP_ID_BCM47162 && mode == 2)
++		bcma_chipco_chipctl_maskset(&bgmac->core->bus->drv_cc, 1, ~0,
++					    BGMAC_CHIPCTL_1_RXC_DLL_BYPASS);
++
++	switch (ci->id) {
++	case BCMA_CHIP_ID_BCM5357:
++	case BCMA_CHIP_ID_BCM4749:
++	case BCMA_CHIP_ID_BCM53572:
++	case BCMA_CHIP_ID_BCM4716:
++	case BCMA_CHIP_ID_BCM47162:
++		fl_ctl = 0x03cb04cb;
++		if (ci->id == BCMA_CHIP_ID_BCM5357 ||
++		    ci->id == BCMA_CHIP_ID_BCM4749 ||
++		    ci->id == BCMA_CHIP_ID_BCM53572)
++			fl_ctl = 0x2300e1;
++		bgmac_write(bgmac, BGMAC_FLOW_CTL_THRESH, fl_ctl);
++		bgmac_write(bgmac, BGMAC_PAUSE_CTL, 0x27fff);
++		break;
++	}
++
++	rxq_ctl = bgmac_read(bgmac, BGMAC_RXQ_CTL);
++	rxq_ctl &= ~BGMAC_RXQ_CTL_MDP_MASK;
++	bp_clk = bcma_pmu_get_bus_clock(&bgmac->core->bus->drv_cc) / 1000000;
++	mdp = (bp_clk * 128 / 1000) - 3;
++	rxq_ctl |= (mdp << BGMAC_RXQ_CTL_MDP_SHIFT);
++	bgmac_write(bgmac, BGMAC_RXQ_CTL, rxq_ctl);
++}
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipinit */
++static void bgmac_chip_init(struct bgmac *bgmac, bool full_init)
++{
++	struct bgmac_dma_ring *ring;
++	u8 *mac = bgmac->net_dev->dev_addr;
++	u32 tmp;
++	int i;
++
++	/* 1 interrupt per received frame */
++	bgmac_write(bgmac, BGMAC_INT_RECV_LAZY, 1 << BGMAC_IRL_FC_SHIFT);
++
++	/* Enable 802.3x tx flow control (honor received PAUSE frames) */
++	bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true);
++
++	if (bgmac->net_dev->flags & IFF_PROMISC)
++		bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false);
++	else
++		bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false);
++
++	/* Set MAC addr */
++	tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
++	bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp);
++	tmp = (mac[4] << 8) | mac[5];
++	bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp);
++
++	if (bgmac->loopback)
++		bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true);
++	else
++		bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true);
++
++	bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
++
++	if (!bgmac->autoneg) {
++		bgmac_speed(bgmac, bgmac->speed);
++		bgmac_phy_force(bgmac);
++	} else if (bgmac->speed) { /* if there is anything to adv */
++		bgmac_phy_advertise(bgmac);
++	}
++
++	if (full_init) {
++		bgmac_dma_init(bgmac);
++		if (1) /* FIXME: is there any case we don't want IRQs? */
++			bgmac_chip_intrs_on(bgmac);
++	} else {
++		for (i = 0; i < BGMAC_MAX_RX_RINGS; i++) {
++			ring = &bgmac->rx_ring[i];
++			bgmac_dma_rx_enable(bgmac, ring);
++		}
++	}
++
++	bgmac_enable(bgmac);
++}
++
++static irqreturn_t bgmac_interrupt(int irq, void *dev_id)
++{
++	struct bgmac *bgmac = netdev_priv(dev_id);
++
++	u32 int_status = bgmac_read(bgmac, BGMAC_INT_STATUS);
++	int_status &= bgmac->int_mask;
++
++	if (!int_status)
++		return IRQ_NONE;
++
++	/* Ack */
++	bgmac_write(bgmac, BGMAC_INT_STATUS, int_status);
++
++	/* Disable new interrupts until handling existing ones */
++	bgmac_chip_intrs_off(bgmac);
++
++	bgmac->int_status = int_status;
++
++	napi_schedule(&bgmac->napi);
++
++	return IRQ_HANDLED;
++}
++
++static int bgmac_poll(struct napi_struct *napi, int weight)
++{
++	struct bgmac *bgmac = container_of(napi, struct bgmac, napi);
++	struct bgmac_dma_ring *ring;
++	int handled = 0;
++
++	if (bgmac->int_status & BGMAC_IS_TX0) {
++		ring = &bgmac->tx_ring[0];
++		bgmac_dma_tx_free(bgmac, ring);
++		bgmac->int_status &= ~BGMAC_IS_TX0;
++	}
++
++	if (bgmac->int_status & BGMAC_IS_RX) {
++		ring = &bgmac->rx_ring[0];
++		handled += bgmac_dma_rx_read(bgmac, ring, weight);
++		bgmac->int_status &= ~BGMAC_IS_RX;
++	}
++
++	if (bgmac->int_status) {
++		bgmac_err(bgmac, "Unknown IRQs: 0x%08X\n", bgmac->int_status);
++		bgmac->int_status = 0;
++	}
++
++	if (handled < weight)
++		napi_complete(napi);
++
++	bgmac_chip_intrs_on(bgmac);
++
++	return handled;
++}
++
++/**************************************************
++ * net_device_ops
++ **************************************************/
++
++static int bgmac_open(struct net_device *net_dev)
++{
++	struct bgmac *bgmac = netdev_priv(net_dev);
++	int err = 0;
++
++	bgmac_chip_reset(bgmac);
++	/* Specs say about reclaiming rings here, but we do that in DMA init */
++	bgmac_chip_init(bgmac, true);
++
++	err = request_irq(bgmac->core->irq, bgmac_interrupt, IRQF_SHARED,
++			  KBUILD_MODNAME, net_dev);
++	if (err < 0) {
++		bgmac_err(bgmac, "IRQ request error: %d!\n", err);
++		goto err_out;
++	}
++	napi_enable(&bgmac->napi);
++
++	netif_carrier_on(net_dev);
++
++err_out:
++	return err;
++}
++
++static int bgmac_stop(struct net_device *net_dev)
++{
++	struct bgmac *bgmac = netdev_priv(net_dev);
++
++	netif_carrier_off(net_dev);
++
++	napi_disable(&bgmac->napi);
++	bgmac_chip_intrs_off(bgmac);
++	free_irq(bgmac->core->irq, net_dev);
++
++	bgmac_chip_reset(bgmac);
++
++	return 0;
++}
++
++static netdev_tx_t bgmac_start_xmit(struct sk_buff *skb,
++				    struct net_device *net_dev)
++{
++	struct bgmac *bgmac = netdev_priv(net_dev);
++	struct bgmac_dma_ring *ring;
++
++	/* No QOS support yet */
++	ring = &bgmac->tx_ring[0];
++	return bgmac_dma_tx_add(bgmac, ring, skb);
++}
++
++static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
++{
++	struct bgmac *bgmac = netdev_priv(net_dev);
++	struct mii_ioctl_data *data = if_mii(ifr);
++
++	switch (cmd) {
++	case SIOCGMIIPHY:
++		data->phy_id = bgmac->phyaddr;
++		/* fallthru */
++	case SIOCGMIIREG:
++		if (!netif_running(net_dev))
++			return -EAGAIN;
++		data->val_out = bgmac_phy_read(bgmac, data->phy_id,
++					       data->reg_num & 0x1f);
++		return 0;
++	case SIOCSMIIREG:
++		if (!netif_running(net_dev))
++			return -EAGAIN;
++		bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f,
++				data->val_in);
++		return 0;
++	default:
++		return -EOPNOTSUPP;
++	}
++}
++
++static const struct net_device_ops bgmac_netdev_ops = {
++	.ndo_open		= bgmac_open,
++	.ndo_stop		= bgmac_stop,
++	.ndo_start_xmit		= bgmac_start_xmit,
++	.ndo_set_mac_address	= eth_mac_addr, /* generic, sets dev_addr */
++	.ndo_do_ioctl           = bgmac_ioctl,
++};
++
++/**************************************************
++ * ethtool_ops
++ **************************************************/
++
++static int bgmac_get_settings(struct net_device *net_dev,
++			      struct ethtool_cmd *cmd)
++{
++	struct bgmac *bgmac = netdev_priv(net_dev);
++
++	cmd->supported = SUPPORTED_10baseT_Half |
++			 SUPPORTED_10baseT_Full |
++			 SUPPORTED_100baseT_Half |
++			 SUPPORTED_100baseT_Full |
++			 SUPPORTED_1000baseT_Half |
++			 SUPPORTED_1000baseT_Full |
++			 SUPPORTED_Autoneg;
++
++	if (bgmac->autoneg) {
++		WARN_ON(cmd->advertising);
++		if (bgmac->full_duplex) {
++			if (bgmac->speed & BGMAC_SPEED_10)
++				cmd->advertising |= ADVERTISED_10baseT_Full;
++			if (bgmac->speed & BGMAC_SPEED_100)
++				cmd->advertising |= ADVERTISED_100baseT_Full;
++			if (bgmac->speed & BGMAC_SPEED_1000)
++				cmd->advertising |= ADVERTISED_1000baseT_Full;
++		} else {
++			if (bgmac->speed & BGMAC_SPEED_10)
++				cmd->advertising |= ADVERTISED_10baseT_Half;
++			if (bgmac->speed & BGMAC_SPEED_100)
++				cmd->advertising |= ADVERTISED_100baseT_Half;
++			if (bgmac->speed & BGMAC_SPEED_1000)
++				cmd->advertising |= ADVERTISED_1000baseT_Half;
++		}
++	} else {
++		switch (bgmac->speed) {
++		case BGMAC_SPEED_10:
++			ethtool_cmd_speed_set(cmd, SPEED_10);
++			break;
++		case BGMAC_SPEED_100:
++			ethtool_cmd_speed_set(cmd, SPEED_100);
++			break;
++		case BGMAC_SPEED_1000:
++			ethtool_cmd_speed_set(cmd, SPEED_1000);
++			break;
++		}
++	}
++
++	cmd->duplex = bgmac->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
++
++	cmd->autoneg = bgmac->autoneg;
++
++	return 0;
++}
++
++#if 0
++static int bgmac_set_settings(struct net_device *net_dev,
++			      struct ethtool_cmd *cmd)
++{
++	struct bgmac *bgmac = netdev_priv(net_dev);
++
++	return -1;
++}
++#endif
++
++static void bgmac_get_drvinfo(struct net_device *net_dev,
++			      struct ethtool_drvinfo *info)
++{
++	strlcpy(info->driver, KBUILD_MODNAME, sizeof(info->driver));
++	strlcpy(info->bus_info, "BCMA", sizeof(info->bus_info));
++}
++
++static const struct ethtool_ops bgmac_ethtool_ops = {
++	.get_settings		= bgmac_get_settings,
++	.get_drvinfo		= bgmac_get_drvinfo,
++};
++
++/**************************************************
++ * BCMA bus ops
++ **************************************************/
++
++/* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipattach */
++static int bgmac_probe(struct bcma_device *core)
++{
++	struct net_device *net_dev;
++	struct bgmac *bgmac;
++	struct ssb_sprom *sprom = &core->bus->sprom;
++	u8 *mac = core->core_unit ? sprom->et1mac : sprom->et0mac;
++	int err;
++
++	/* We don't support 2nd, 3rd, ... units, SPROM has to be adjusted */
++	if (core->core_unit > 1) {
++		pr_err("Unsupported core_unit %d\n", core->core_unit);
++		return -ENOTSUPP;
++	}
++
++	/* Allocation and references */
++	net_dev = alloc_etherdev(sizeof(*bgmac));
++	if (!net_dev)
++		return -ENOMEM;
++	net_dev->netdev_ops = &bgmac_netdev_ops;
++	net_dev->irq = core->irq;
++	SET_ETHTOOL_OPS(net_dev, &bgmac_ethtool_ops);
++	bgmac = netdev_priv(net_dev);
++	bgmac->net_dev = net_dev;
++	bgmac->core = core;
++	bcma_set_drvdata(core, bgmac);
++
++	/* Defaults */
++	bgmac->autoneg = true;
++	bgmac->full_duplex = true;
++	bgmac->speed = BGMAC_SPEED_10 | BGMAC_SPEED_100 | BGMAC_SPEED_1000;
++	memcpy(bgmac->net_dev->dev_addr, mac, ETH_ALEN);
++
++	/* On BCM4706 we need common core to access PHY */
++	if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
++	    !core->bus->drv_gmac_cmn.core) {
++		bgmac_err(bgmac, "GMAC CMN core not found (required for BCM4706)\n");
++		err = -ENODEV;
++		goto err_netdev_free;
++	}
++	bgmac->cmn = core->bus->drv_gmac_cmn.core;
++
++	bgmac->phyaddr = core->core_unit ? sprom->et1phyaddr :
++			 sprom->et0phyaddr;
++	bgmac->phyaddr &= BGMAC_PHY_MASK;
++	if (bgmac->phyaddr == BGMAC_PHY_MASK) {
++		bgmac_err(bgmac, "No PHY found\n");
++		err = -ENODEV;
++		goto err_netdev_free;
++	}
++	bgmac_info(bgmac, "Found PHY addr: %d%s\n", bgmac->phyaddr,
++		   bgmac->phyaddr == BGMAC_PHY_NOREGS ? " (NOREGS)" : "");
++
++	if (core->bus->hosttype == BCMA_HOSTTYPE_PCI) {
++		bgmac_err(bgmac, "PCI setup not implemented\n");
++		err = -ENOTSUPP;
++		goto err_netdev_free;
++	}
++
++	bgmac_chip_reset(bgmac);
++
++	err = bgmac_dma_alloc(bgmac);
++	if (err) {
++		bgmac_err(bgmac, "Unable to alloc memory for DMA\n");
++		goto err_netdev_free;
++	}
++
++	bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
++	if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0)
++		bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
++
++	/* TODO: reset the external phy. Specs are needed */
++	bgmac_phy_reset(bgmac);
++
++	bgmac->has_robosw = !!(core->bus->sprom.boardflags_lo &
++			       BGMAC_BFL_ENETROBO);
++	if (bgmac->has_robosw)
++		bgmac_warn(bgmac, "Support for Roboswitch not implemented\n");
++
++	if (core->bus->sprom.boardflags_lo & BGMAC_BFL_ENETADM)
++		bgmac_warn(bgmac, "Support for ADMtek ethernet switch not implemented\n");
++
++	err = register_netdev(bgmac->net_dev);
++	if (err) {
++		bgmac_err(bgmac, "Cannot register net device\n");
++		err = -ENOTSUPP;
++		goto err_dma_free;
++	}
++
++	netif_carrier_off(net_dev);
++
++	netif_napi_add(net_dev, &bgmac->napi, bgmac_poll, BGMAC_WEIGHT);
++
++	return 0;
++
++err_dma_free:
++	bgmac_dma_free(bgmac);
++
++err_netdev_free:
++	bcma_set_drvdata(core, NULL);
++	free_netdev(net_dev);
++
++	return err;
++}
++
++static void bgmac_remove(struct bcma_device *core)
++{
++	struct bgmac *bgmac = bcma_get_drvdata(core);
++
++	netif_napi_del(&bgmac->napi);
++	unregister_netdev(bgmac->net_dev);
++	bgmac_dma_free(bgmac);
++	bcma_set_drvdata(core, NULL);
++	free_netdev(bgmac->net_dev);
++}
++
++static struct bcma_driver bgmac_bcma_driver = {
++	.name		= KBUILD_MODNAME,
++	.id_table	= bgmac_bcma_tbl,
++	.probe		= bgmac_probe,
++	.remove		= bgmac_remove,
++};
++
++static int __init bgmac_init(void)
++{
++	int err;
++
++	err = bcma_driver_register(&bgmac_bcma_driver);
++	if (err)
++		return err;
++	pr_info("Broadcom 47xx GBit MAC driver loaded\n");
++
++	return 0;
++}
++
++static void __exit bgmac_exit(void)
++{
++	bcma_driver_unregister(&bgmac_bcma_driver);
++}
++
++module_init(bgmac_init)
++module_exit(bgmac_exit)
++
++MODULE_AUTHOR("Rafał Miłecki");
++MODULE_LICENSE("GPL");
+--- /dev/null
++++ b/drivers/net/ethernet/broadcom/bgmac.h
+@@ -0,0 +1,456 @@
++#ifndef _BGMAC_H
++#define _BGMAC_H
++
++#define pr_fmt(fmt)		KBUILD_MODNAME ": " fmt
++
++#define bgmac_err(bgmac, fmt, ...) \
++	dev_err(&(bgmac)->core->dev, fmt, ##__VA_ARGS__)
++#define bgmac_warn(bgmac, fmt, ...) \
++	dev_warn(&(bgmac)->core->dev, fmt,  ##__VA_ARGS__)
++#define bgmac_info(bgmac, fmt, ...) \
++	dev_info(&(bgmac)->core->dev, fmt,  ##__VA_ARGS__)
++#define bgmac_dbg(bgmac, fmt, ...) \
++	dev_dbg(&(bgmac)->core->dev, fmt, ##__VA_ARGS__)
++
++#include <linux/bcma/bcma.h>
++#include <linux/netdevice.h>
++
++#define BGMAC_DEV_CTL				0x000
++#define  BGMAC_DC_TSM				0x00000002
++#define  BGMAC_DC_CFCO				0x00000004
++#define  BGMAC_DC_RLSS				0x00000008
++#define  BGMAC_DC_MROR				0x00000010
++#define  BGMAC_DC_FCM_MASK			0x00000060
++#define  BGMAC_DC_FCM_SHIFT			5
++#define  BGMAC_DC_NAE				0x00000080
++#define  BGMAC_DC_TF				0x00000100
++#define  BGMAC_DC_RDS_MASK			0x00030000
++#define  BGMAC_DC_RDS_SHIFT			16
++#define  BGMAC_DC_TDS_MASK			0x000c0000
++#define  BGMAC_DC_TDS_SHIFT			18
++#define BGMAC_DEV_STATUS			0x004		/* Configuration of the interface */
++#define  BGMAC_DS_RBF				0x00000001
++#define  BGMAC_DS_RDF				0x00000002
++#define  BGMAC_DS_RIF				0x00000004
++#define  BGMAC_DS_TBF				0x00000008
++#define  BGMAC_DS_TDF				0x00000010
++#define  BGMAC_DS_TIF				0x00000020
++#define  BGMAC_DS_PO				0x00000040
++#define  BGMAC_DS_MM_MASK			0x00000300	/* Mode of the interface */
++#define  BGMAC_DS_MM_SHIFT			8
++#define BGMAC_BIST_STATUS			0x00c
++#define BGMAC_INT_STATUS			0x020		/* Interrupt status */
++#define  BGMAC_IS_MRO				0x00000001
++#define  BGMAC_IS_MTO				0x00000002
++#define  BGMAC_IS_TFD				0x00000004
++#define  BGMAC_IS_LS				0x00000008
++#define  BGMAC_IS_MDIO				0x00000010
++#define  BGMAC_IS_MR				0x00000020
++#define  BGMAC_IS_MT				0x00000040
++#define  BGMAC_IS_TO				0x00000080
++#define  BGMAC_IS_DESC_ERR			0x00000400	/* Descriptor error */
++#define  BGMAC_IS_DATA_ERR			0x00000800	/* Data error */
++#define  BGMAC_IS_DESC_PROT_ERR			0x00001000	/* Descriptor protocol error */
++#define  BGMAC_IS_RX_DESC_UNDERF		0x00002000	/* Receive descriptor underflow */
++#define  BGMAC_IS_RX_F_OVERF			0x00004000	/* Receive FIFO overflow */
++#define  BGMAC_IS_TX_F_UNDERF			0x00008000	/* Transmit FIFO underflow */
++#define  BGMAC_IS_RX				0x00010000	/* Interrupt for RX queue 0 */
++#define  BGMAC_IS_TX0				0x01000000	/* Interrupt for TX queue 0 */
++#define  BGMAC_IS_TX1				0x02000000	/* Interrupt for TX queue 1 */
++#define  BGMAC_IS_TX2				0x04000000	/* Interrupt for TX queue 2 */
++#define  BGMAC_IS_TX3				0x08000000	/* Interrupt for TX queue 3 */
++#define  BGMAC_IS_TX_MASK			0x0f000000
++#define  BGMAC_IS_INTMASK			0x0f01fcff
++#define  BGMAC_IS_ERRMASK			0x0000fc00
++#define BGMAC_INT_MASK				0x024		/* Interrupt mask */
++#define BGMAC_GP_TIMER				0x028
++#define BGMAC_INT_RECV_LAZY			0x100
++#define  BGMAC_IRL_TO_MASK			0x00ffffff
++#define  BGMAC_IRL_FC_MASK			0xff000000
++#define  BGMAC_IRL_FC_SHIFT			24		/* Shift the number of interrupts triggered per received frame */
++#define BGMAC_FLOW_CTL_THRESH			0x104		/* Flow control thresholds */
++#define BGMAC_WRRTHRESH				0x108
++#define BGMAC_GMAC_IDLE_CNT_THRESH		0x10c
++#define BGMAC_PHY_ACCESS			0x180		/* PHY access address */
++#define  BGMAC_PA_DATA_MASK			0x0000ffff
++#define  BGMAC_PA_ADDR_MASK			0x001f0000
++#define  BGMAC_PA_ADDR_SHIFT			16
++#define  BGMAC_PA_REG_MASK			0x1f000000
++#define  BGMAC_PA_REG_SHIFT			24
++#define  BGMAC_PA_WRITE				0x20000000
++#define  BGMAC_PA_START				0x40000000
++#define BGMAC_PHY_CNTL				0x188		/* PHY control address */
++#define  BGMAC_PC_EPA_MASK			0x0000001f
++#define  BGMAC_PC_MCT_MASK			0x007f0000
++#define  BGMAC_PC_MCT_SHIFT			16
++#define  BGMAC_PC_MTE				0x00800000
++#define BGMAC_TXQ_CTL				0x18c
++#define  BGMAC_TXQ_CTL_DBT_MASK			0x00000fff
++#define  BGMAC_TXQ_CTL_DBT_SHIFT		0
++#define BGMAC_RXQ_CTL				0x190
++#define  BGMAC_RXQ_CTL_DBT_MASK			0x00000fff
++#define  BGMAC_RXQ_CTL_DBT_SHIFT		0
++#define  BGMAC_RXQ_CTL_PTE			0x00001000
++#define  BGMAC_RXQ_CTL_MDP_MASK			0x3f000000
++#define  BGMAC_RXQ_CTL_MDP_SHIFT		24
++#define BGMAC_GPIO_SELECT			0x194
++#define BGMAC_GPIO_OUTPUT_EN			0x198
++/* For 0x1e0 see BCMA_CLKCTLST */
++#define BGMAC_HW_WAR				0x1e4
++#define BGMAC_PWR_CTL				0x1e8
++#define BGMAC_DMA_BASE0				0x200		/* Tx and Rx controller */
++#define BGMAC_DMA_BASE1				0x240		/* Tx controller only */
++#define BGMAC_DMA_BASE2				0x280		/* Tx controller only */
++#define BGMAC_DMA_BASE3				0x2C0		/* Tx controller only */
++#define BGMAC_TX_GOOD_OCTETS			0x300
++#define BGMAC_TX_GOOD_OCTETS_HIGH		0x304
++#define BGMAC_TX_GOOD_PKTS			0x308
++#define BGMAC_TX_OCTETS				0x30c
++#define BGMAC_TX_OCTETS_HIGH			0x310
++#define BGMAC_TX_PKTS				0x314
++#define BGMAC_TX_BROADCAST_PKTS			0x318
++#define BGMAC_TX_MULTICAST_PKTS			0x31c
++#define BGMAC_TX_LEN_64				0x320
++#define BGMAC_TX_LEN_65_TO_127			0x324
++#define BGMAC_TX_LEN_128_TO_255			0x328
++#define BGMAC_TX_LEN_256_TO_511			0x32c
++#define BGMAC_TX_LEN_512_TO_1023		0x330
++#define BGMAC_TX_LEN_1024_TO_1522		0x334
++#define BGMAC_TX_LEN_1523_TO_2047		0x338
++#define BGMAC_TX_LEN_2048_TO_4095		0x33c
++#define BGMAC_TX_LEN_4095_TO_8191		0x340
++#define BGMAC_TX_LEN_8192_TO_MAX		0x344
++#define BGMAC_TX_JABBER_PKTS			0x348		/* Error */
++#define BGMAC_TX_OVERSIZE_PKTS			0x34c		/* Error */
++#define BGMAC_TX_FRAGMENT_PKTS			0x350
++#define BGMAC_TX_UNDERRUNS			0x354		/* Error */
++#define BGMAC_TX_TOTAL_COLS			0x358
++#define BGMAC_TX_SINGLE_COLS			0x35c
++#define BGMAC_TX_MULTIPLE_COLS			0x360
++#define BGMAC_TX_EXCESSIVE_COLS			0x364		/* Error */
++#define BGMAC_TX_LATE_COLS			0x368		/* Error */
++#define BGMAC_TX_DEFERED			0x36c
++#define BGMAC_TX_CARRIER_LOST			0x370
++#define BGMAC_TX_PAUSE_PKTS			0x374
++#define BGMAC_TX_UNI_PKTS			0x378
++#define BGMAC_TX_Q0_PKTS			0x37c
++#define BGMAC_TX_Q0_OCTETS			0x380
++#define BGMAC_TX_Q0_OCTETS_HIGH			0x384
++#define BGMAC_TX_Q1_PKTS			0x388
++#define BGMAC_TX_Q1_OCTETS			0x38c
++#define BGMAC_TX_Q1_OCTETS_HIGH			0x390
++#define BGMAC_TX_Q2_PKTS			0x394
++#define BGMAC_TX_Q2_OCTETS			0x398
++#define BGMAC_TX_Q2_OCTETS_HIGH			0x39c
++#define BGMAC_TX_Q3_PKTS			0x3a0
++#define BGMAC_TX_Q3_OCTETS			0x3a4
++#define BGMAC_TX_Q3_OCTETS_HIGH			0x3a8
++#define BGMAC_RX_GOOD_OCTETS			0x3b0
++#define BGMAC_RX_GOOD_OCTETS_HIGH		0x3b4
++#define BGMAC_RX_GOOD_PKTS			0x3b8
++#define BGMAC_RX_OCTETS				0x3bc
++#define BGMAC_RX_OCTETS_HIGH			0x3c0
++#define BGMAC_RX_PKTS				0x3c4
++#define BGMAC_RX_BROADCAST_PKTS			0x3c8
++#define BGMAC_RX_MULTICAST_PKTS			0x3cc
++#define BGMAC_RX_LEN_64				0x3d0
++#define BGMAC_RX_LEN_65_TO_127			0x3d4
++#define BGMAC_RX_LEN_128_TO_255			0x3d8
++#define BGMAC_RX_LEN_256_TO_511			0x3dc
++#define BGMAC_RX_LEN_512_TO_1023		0x3e0
++#define BGMAC_RX_LEN_1024_TO_1522		0x3e4
++#define BGMAC_RX_LEN_1523_TO_2047		0x3e8
++#define BGMAC_RX_LEN_2048_TO_4095		0x3ec
++#define BGMAC_RX_LEN_4095_TO_8191		0x3f0
++#define BGMAC_RX_LEN_8192_TO_MAX		0x3f4
++#define BGMAC_RX_JABBER_PKTS			0x3f8		/* Error */
++#define BGMAC_RX_OVERSIZE_PKTS			0x3fc		/* Error */
++#define BGMAC_RX_FRAGMENT_PKTS			0x400
++#define BGMAC_RX_MISSED_PKTS			0x404		/* Error */
++#define BGMAC_RX_CRC_ALIGN_ERRS			0x408		/* Error */
++#define BGMAC_RX_UNDERSIZE			0x40c		/* Error */
++#define BGMAC_RX_CRC_ERRS			0x410		/* Error */
++#define BGMAC_RX_ALIGN_ERRS			0x414		/* Error */
++#define BGMAC_RX_SYMBOL_ERRS			0x418		/* Error */
++#define BGMAC_RX_PAUSE_PKTS			0x41c
++#define BGMAC_RX_NONPAUSE_PKTS			0x420
++#define BGMAC_RX_SACHANGES			0x424
++#define BGMAC_RX_UNI_PKTS			0x428
++#define BGMAC_UNIMAC_VERSION			0x800
++#define BGMAC_HDBKP_CTL				0x804
++#define BGMAC_CMDCFG				0x808		/* Configuration */
++#define  BGMAC_CMDCFG_TE			0x00000001	/* Set to activate TX */
++#define  BGMAC_CMDCFG_RE			0x00000002	/* Set to activate RX */
++#define  BGMAC_CMDCFG_ES_MASK			0x0000000c	/* Ethernet speed see gmac_speed */
++#define   BGMAC_CMDCFG_ES_10			0x00000000
++#define   BGMAC_CMDCFG_ES_100			0x00000004
++#define   BGMAC_CMDCFG_ES_1000			0x00000008
++#define  BGMAC_CMDCFG_PROM			0x00000010	/* Set to activate promiscuous mode */
++#define  BGMAC_CMDCFG_PAD_EN			0x00000020
++#define  BGMAC_CMDCFG_CF			0x00000040
++#define  BGMAC_CMDCFG_PF			0x00000080
++#define  BGMAC_CMDCFG_RPI			0x00000100	/* Unset to enable 802.3x tx flow control */
++#define  BGMAC_CMDCFG_TAI			0x00000200
++#define  BGMAC_CMDCFG_HD			0x00000400	/* Set if in half duplex mode */
++#define  BGMAC_CMDCFG_HD_SHIFT			10
++#define  BGMAC_CMDCFG_SR			0x00000800	/* Set to reset mode */
++#define  BGMAC_CMDCFG_ML			0x00008000	/* Set to activate mac loopback mode */
++#define  BGMAC_CMDCFG_AE			0x00400000
++#define  BGMAC_CMDCFG_CFE			0x00800000
++#define  BGMAC_CMDCFG_NLC			0x01000000
++#define  BGMAC_CMDCFG_RL			0x02000000
++#define  BGMAC_CMDCFG_RED			0x04000000
++#define  BGMAC_CMDCFG_PE			0x08000000
++#define  BGMAC_CMDCFG_TPI			0x10000000
++#define  BGMAC_CMDCFG_AT			0x20000000
++#define BGMAC_MACADDR_HIGH			0x80c		/* High 4 octets of own mac address */
++#define BGMAC_MACADDR_LOW			0x810		/* Low 2 octets of own mac address */
++#define BGMAC_RXMAX_LENGTH			0x814		/* Max receive frame length with vlan tag */
++#define BGMAC_PAUSEQUANTA			0x818
++#define BGMAC_MAC_MODE				0x844
++#define BGMAC_OUTERTAG				0x848
++#define BGMAC_INNERTAG				0x84c
++#define BGMAC_TXIPG				0x85c
++#define BGMAC_PAUSE_CTL				0xb30
++#define BGMAC_TX_FLUSH				0xb34
++#define BGMAC_RX_STATUS				0xb38
++#define BGMAC_TX_STATUS				0xb3c
++
++#define BGMAC_PHY_CTL				0x00
++#define  BGMAC_PHY_CTL_SPEED_MSB		0x0040
++#define  BGMAC_PHY_CTL_DUPLEX			0x0100		/* duplex mode */
++#define  BGMAC_PHY_CTL_RESTART			0x0200		/* restart autonegotiation */
++#define  BGMAC_PHY_CTL_ANENAB			0x1000		/* enable autonegotiation */
++#define  BGMAC_PHY_CTL_SPEED			0x2000
++#define  BGMAC_PHY_CTL_LOOP			0x4000		/* loopback */
++#define  BGMAC_PHY_CTL_RESET			0x8000		/* reset */
++/* Helpers */
++#define  BGMAC_PHY_CTL_SPEED_10			0
++#define  BGMAC_PHY_CTL_SPEED_100		BGMAC_PHY_CTL_SPEED
++#define  BGMAC_PHY_CTL_SPEED_1000		BGMAC_PHY_CTL_SPEED_MSB
++#define BGMAC_PHY_ADV				0x04
++#define  BGMAC_PHY_ADV_10HALF			0x0020		/* advertise 10MBits/s half duplex */
++#define  BGMAC_PHY_ADV_10FULL			0x0040		/* advertise 10MBits/s full duplex */
++#define  BGMAC_PHY_ADV_100HALF			0x0080		/* advertise 100MBits/s half duplex */
++#define  BGMAC_PHY_ADV_100FULL			0x0100		/* advertise 100MBits/s full duplex */
++#define BGMAC_PHY_ADV2				0x09
++#define  BGMAC_PHY_ADV2_1000HALF		0x0100		/* advertise 1000MBits/s half duplex */
++#define  BGMAC_PHY_ADV2_1000FULL		0x0200		/* advertise 1000MBits/s full duplex */
++
++/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */
++#define BGMAC_BCMA_IOCTL_SW_CLKEN		0x00000004	/* PHY Clock Enable */
++#define BGMAC_BCMA_IOCTL_SW_RESET		0x00000008	/* PHY Reset */
++
++/* BCMA GMAC core specific IO status (BCMA_IOST) flags */
++#define BGMAC_BCMA_IOST_ATTACHED		0x00000800
++
++#define BGMAC_NUM_MIB_TX_REGS	\
++		(((BGMAC_TX_Q3_OCTETS_HIGH - BGMAC_TX_GOOD_OCTETS) / 4) + 1)
++#define BGMAC_NUM_MIB_RX_REGS	\
++		(((BGMAC_RX_UNI_PKTS - BGMAC_RX_GOOD_OCTETS) / 4) + 1)
++
++#define BGMAC_DMA_TX_CTL			0x00
++#define  BGMAC_DMA_TX_ENABLE			0x00000001
++#define  BGMAC_DMA_TX_SUSPEND			0x00000002
++#define  BGMAC_DMA_TX_LOOPBACK			0x00000004
++#define  BGMAC_DMA_TX_FLUSH			0x00000010
++#define  BGMAC_DMA_TX_PARITY_DISABLE		0x00000800
++#define  BGMAC_DMA_TX_ADDREXT_MASK		0x00030000
++#define  BGMAC_DMA_TX_ADDREXT_SHIFT		16
++#define BGMAC_DMA_TX_INDEX			0x04
++#define BGMAC_DMA_TX_RINGLO			0x08
++#define BGMAC_DMA_TX_RINGHI			0x0C
++#define BGMAC_DMA_TX_STATUS			0x10
++#define  BGMAC_DMA_TX_STATDPTR			0x00001FFF
++#define  BGMAC_DMA_TX_STAT			0xF0000000
++#define   BGMAC_DMA_TX_STAT_DISABLED		0x00000000
++#define   BGMAC_DMA_TX_STAT_ACTIVE		0x10000000
++#define   BGMAC_DMA_TX_STAT_IDLEWAIT		0x20000000
++#define   BGMAC_DMA_TX_STAT_STOPPED		0x30000000
++#define   BGMAC_DMA_TX_STAT_SUSP		0x40000000
++#define BGMAC_DMA_TX_ERROR			0x14
++#define  BGMAC_DMA_TX_ERRDPTR			0x0001FFFF
++#define  BGMAC_DMA_TX_ERR			0xF0000000
++#define   BGMAC_DMA_TX_ERR_NOERR		0x00000000
++#define   BGMAC_DMA_TX_ERR_PROT			0x10000000
++#define   BGMAC_DMA_TX_ERR_UNDERRUN		0x20000000
++#define   BGMAC_DMA_TX_ERR_TRANSFER		0x30000000
++#define   BGMAC_DMA_TX_ERR_DESCREAD		0x40000000
++#define   BGMAC_DMA_TX_ERR_CORE			0x50000000
++#define BGMAC_DMA_RX_CTL			0x20
++#define  BGMAC_DMA_RX_ENABLE			0x00000001
++#define  BGMAC_DMA_RX_FRAME_OFFSET_MASK		0x000000FE
++#define  BGMAC_DMA_RX_FRAME_OFFSET_SHIFT	1
++#define  BGMAC_DMA_RX_DIRECT_FIFO		0x00000100
++#define  BGMAC_DMA_RX_OVERFLOW_CONT		0x00000400
++#define  BGMAC_DMA_RX_PARITY_DISABLE		0x00000800
++#define  BGMAC_DMA_RX_ADDREXT_MASK		0x00030000
++#define  BGMAC_DMA_RX_ADDREXT_SHIFT		16
++#define BGMAC_DMA_RX_INDEX			0x24
++#define BGMAC_DMA_RX_RINGLO			0x28
++#define BGMAC_DMA_RX_RINGHI			0x2C
++#define BGMAC_DMA_RX_STATUS			0x30
++#define  BGMAC_DMA_RX_STATDPTR			0x00001FFF
++#define  BGMAC_DMA_RX_STAT			0xF0000000
++#define   BGMAC_DMA_RX_STAT_DISABLED		0x00000000
++#define   BGMAC_DMA_RX_STAT_ACTIVE		0x10000000
++#define   BGMAC_DMA_RX_STAT_IDLEWAIT		0x20000000
++#define   BGMAC_DMA_RX_STAT_STOPPED		0x30000000
++#define   BGMAC_DMA_RX_STAT_SUSP		0x40000000
++#define BGMAC_DMA_RX_ERROR			0x34
++#define  BGMAC_DMA_RX_ERRDPTR			0x0001FFFF
++#define  BGMAC_DMA_RX_ERR			0xF0000000
++#define   BGMAC_DMA_RX_ERR_NOERR		0x00000000
++#define   BGMAC_DMA_RX_ERR_PROT			0x10000000
++#define   BGMAC_DMA_RX_ERR_UNDERRUN		0x20000000
++#define   BGMAC_DMA_RX_ERR_TRANSFER		0x30000000
++#define   BGMAC_DMA_RX_ERR_DESCREAD		0x40000000
++#define   BGMAC_DMA_RX_ERR_CORE			0x50000000
++
++#define BGMAC_DESC_CTL0_EOT			0x10000000	/* End of ring */
++#define BGMAC_DESC_CTL0_IOC			0x20000000	/* IRQ on complete */
++#define BGMAC_DESC_CTL0_SOF			0x40000000	/* Start of frame */
++#define BGMAC_DESC_CTL0_EOF			0x80000000	/* End of frame */
++#define BGMAC_DESC_CTL1_LEN			0x00001FFF
++
++#define BGMAC_PHY_NOREGS			0x1E
++#define BGMAC_PHY_MASK				0x1F
++
++#define BGMAC_MAX_TX_RINGS			4
++#define BGMAC_MAX_RX_RINGS			1
++
++#define BGMAC_TX_RING_SLOTS			128
++#define BGMAC_RX_RING_SLOTS			512 - 1		/* Why -1? Well, Broadcom does that... */
++
++#define BGMAC_RX_HEADER_LEN			28		/* Last 24 bytes are unused. Well... */
++#define BGMAC_RX_FRAME_OFFSET			30		/* There are 2 unused bytes between header and real data */
++#define BGMAC_RX_MAX_FRAME_SIZE			1536		/* Copied from b44/tg3 */
++#define BGMAC_RX_BUF_SIZE			(BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
++
++#define BGMAC_BFL_ENETROBO			0x0010		/* has ephy roboswitch spi */
++#define BGMAC_BFL_ENETADM			0x0080		/* has ADMtek switch */
++#define BGMAC_BFL_ENETVLAN			0x0100		/* can do vlan */
++
++#define BGMAC_CHIPCTL_1_IF_TYPE_MASK		0x00000030
++#define BGMAC_CHIPCTL_1_IF_TYPE_RMII		0x00000000
++#define BGMAC_CHIPCTL_1_IF_TYPE_MI		0x00000010
++#define BGMAC_CHIPCTL_1_IF_TYPE_RGMII		0x00000020
++#define BGMAC_CHIPCTL_1_SW_TYPE_MASK		0x000000C0
++#define BGMAC_CHIPCTL_1_SW_TYPE_EPHY		0x00000000
++#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII		0x00000040
++#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII	0x00000080
++#define BGMAC_CHIPCTL_1_SW_TYPE_RGMI		0x000000C0
++#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS		0x00010000
++
++#define BGMAC_SPEED_10				0x0001
++#define BGMAC_SPEED_100				0x0002
++#define BGMAC_SPEED_1000			0x0004
++
++#define BGMAC_WEIGHT	64
++
++#define ETHER_MAX_LEN   1518
++
++struct bgmac_slot_info {
++	struct sk_buff *skb;
++	dma_addr_t dma_addr;
++};
++
++struct bgmac_dma_desc {
++	__le32 ctl0;
++	__le32 ctl1;
++	__le32 addr_low;
++	__le32 addr_high;
++} __packed;
++
++enum bgmac_dma_ring_type {
++	BGMAC_DMA_RING_TX,
++	BGMAC_DMA_RING_RX,
++};
++
++/**
++ * bgmac_dma_ring - contains info about DMA ring (either TX or RX one)
++ * @start: index of the first slot containing data
++ * @end: index of a slot that can *not* be read (yet)
++ *
++ * Be really aware of the specific @end meaning. It's an index of a slot *after*
++ * the one containing data that can be read. If @start equals @end the ring is
++ * empty.
++ */
++struct bgmac_dma_ring {
++	u16 num_slots;
++	u16 start;
++	u16 end;
++
++	u16 mmio_base;
++	struct bgmac_dma_desc *cpu_base;
++	dma_addr_t dma_base;
++
++	struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS];
++};
++
++struct bgmac_rx_header {
++	__le16 len;
++	__le16 flags;
++	__le16 pad[12];
++};
++
++struct bgmac {
++	struct bcma_device *core;
++	struct bcma_device *cmn; /* Reference to CMN core for BCM4706 */
++	struct net_device *net_dev;
++	struct napi_struct napi;
++
++	/* DMA */
++	struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS];
++	struct bgmac_dma_ring rx_ring[BGMAC_MAX_RX_RINGS];
++
++	/* Stats */
++	bool stats_grabbed;
++	u32 mib_tx_regs[BGMAC_NUM_MIB_TX_REGS];
++	u32 mib_rx_regs[BGMAC_NUM_MIB_RX_REGS];
++
++	/* Int */
++	u32 int_mask;
++	u32 int_status;
++
++	/* Speed-related */
++	int speed;
++	bool autoneg;
++	bool full_duplex;
++
++	u8 phyaddr;
++	bool has_robosw;
++
++	bool loopback;
++};
++
++static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset)
++{
++	return bcma_read32(bgmac->core, offset);
++}
++
++static inline void bgmac_write(struct bgmac *bgmac, u16 offset, u32 value)
++{
++	bcma_write32(bgmac->core, offset, value);
++}
++
++static inline void bgmac_maskset(struct bgmac *bgmac, u16 offset, u32 mask,
++				   u32 set)
++{
++	bgmac_write(bgmac, offset, (bgmac_read(bgmac, offset) & mask) | set);
++}
++
++static inline void bgmac_mask(struct bgmac *bgmac, u16 offset, u32 mask)
++{
++	bgmac_maskset(bgmac, offset, mask, 0);
++}
++
++static inline void bgmac_set(struct bgmac *bgmac, u16 offset, u32 set)
++{
++	bgmac_maskset(bgmac, offset, ~0, set);
++}
++
++u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg);
++void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value);
++
++#endif /* _BGMAC_H */
+--- a/include/linux/bcma/bcma_driver_chipcommon.h
++++ b/include/linux/bcma/bcma_driver_chipcommon.h
+@@ -623,4 +623,6 @@ extern void bcma_chipco_regctl_maskset(s
+ 				       u32 offset, u32 mask, u32 set);
+ extern void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid);
+ 
++extern u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc);
++
+ #endif /* LINUX_BCMA_DRIVER_CC_H_ */
diff --git a/target/linux/brcm47xx/patches-3.8/760-bgmac-fixes.patch b/target/linux/brcm47xx/patches-3.8/760-bgmac-fixes.patch
new file mode 100644
index 0000000..d764806
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/760-bgmac-fixes.patch
@@ -0,0 +1,190 @@
+--- a/drivers/net/ethernet/broadcom/bgmac.c
++++ b/drivers/net/ethernet/broadcom/bgmac.c
+@@ -301,7 +301,7 @@ static int bgmac_dma_rx_read(struct bgma
+ 			bgmac_err(bgmac, "Found poisoned packet at slot %d, DMA issue!\n",
+ 				  ring->start);
+ 		} else {
+-			new_skb = netdev_alloc_skb(bgmac->net_dev, len);
++			new_skb = netdev_alloc_skb_ip_align(bgmac->net_dev, len);
+ 			if (new_skb) {
+ 				skb_put(new_skb, len);
+ 				skb_copy_from_linear_data_offset(skb, BGMAC_RX_FRAME_OFFSET,
+@@ -535,7 +535,7 @@ static void bgmac_dma_init(struct bgmac
+  * PHY ops
+  **************************************************/
+ 
+-u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg)
++static u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg)
+ {
+ 	struct bcma_device *core;
+ 	u16 phy_access_addr;
+@@ -584,7 +584,7 @@ u16 bgmac_phy_read(struct bgmac *bgmac,
+ }
+ 
+ /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphywr */
+-void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value)
++static int bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value)
+ {
+ 	struct bcma_device *core;
+ 	u16 phy_access_addr;
+@@ -617,9 +617,13 @@ void bgmac_phy_write(struct bgmac *bgmac
+ 	tmp |= value;
+ 	bcma_write32(core, phy_access_addr, tmp);
+ 
+-	if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000))
++	if (!bgmac_wait_value(core, phy_access_addr, BGMAC_PA_START, 0, 1000)) {
+ 		bgmac_err(bgmac, "Writing to PHY %d register 0x%X failed\n",
+ 			  phyaddr, reg);
++		return -ETIMEDOUT;
++	}
++
++	return 0;
+ }
+ 
+ /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/chipphyforce */
+@@ -761,6 +765,26 @@ static void bgmac_cmdcfg_maskset(struct
+ 	udelay(2);
+ }
+ 
++static void bgmac_write_mac_address(struct bgmac *bgmac, u8 *addr)
++{
++	u32 tmp;
++
++	tmp = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
++	bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp);
++	tmp = (addr[4] << 8) | addr[5];
++	bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp);
++}
++
++static void bgmac_set_rx_mode(struct net_device *net_dev)
++{
++	struct bgmac *bgmac = netdev_priv(net_dev);
++
++	if (net_dev->flags & IFF_PROMISC)
++		bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, true);
++	else
++		bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, true);
++}
++
+ #if 0 /* We don't use that regs yet */
+ static void bgmac_chip_stats_update(struct bgmac *bgmac)
+ {
+@@ -889,8 +913,10 @@ static void bgmac_chip_reset(struct bgma
+ 			sw_type = et_swtype;
+ 		} else if (ci->id == BCMA_CHIP_ID_BCM5357 && ci->pkg == 9) {
+ 			sw_type = BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII;
+-		} else if (0) {
+-			/* TODO */
++		} else if ((ci->id != BCMA_CHIP_ID_BCM53572 && ci->pkg == 10) ||
++			   (ci->id == BCMA_CHIP_ID_BCM53572 && ci->pkg == 9)) {
++			sw_type = BGMAC_CHIPCTL_1_IF_TYPE_RGMII |
++				  BGMAC_CHIPCTL_1_SW_TYPE_RGMII;
+ 		}
+ 		bcma_chipco_chipctl_maskset(cc, 1,
+ 					    ~(BGMAC_CHIPCTL_1_IF_TYPE_MASK |
+@@ -948,6 +974,7 @@ static void bgmac_chip_intrs_on(struct b
+ static void bgmac_chip_intrs_off(struct bgmac *bgmac)
+ {
+ 	bgmac_write(bgmac, BGMAC_INT_MASK, 0);
++	bgmac_read(bgmac, BGMAC_INT_MASK);
+ }
+ 
+ /* http://bcm-v4.sipsolutions.net/mac-gbit/gmac/gmac_enable */
+@@ -1004,8 +1031,6 @@ static void bgmac_enable(struct bgmac *b
+ static void bgmac_chip_init(struct bgmac *bgmac, bool full_init)
+ {
+ 	struct bgmac_dma_ring *ring;
+-	u8 *mac = bgmac->net_dev->dev_addr;
+-	u32 tmp;
+ 	int i;
+ 
+ 	/* 1 interrupt per received frame */
+@@ -1014,21 +1039,14 @@ static void bgmac_chip_init(struct bgmac
+ 	/* Enable 802.3x tx flow control (honor received PAUSE frames) */
+ 	bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_RPI, 0, true);
+ 
+-	if (bgmac->net_dev->flags & IFF_PROMISC)
+-		bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_PROM, false);
+-	else
+-		bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_PROM, 0, false);
++	bgmac_set_rx_mode(bgmac->net_dev);
+ 
+-	/* Set MAC addr */
+-	tmp = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
+-	bgmac_write(bgmac, BGMAC_MACADDR_HIGH, tmp);
+-	tmp = (mac[4] << 8) | mac[5];
+-	bgmac_write(bgmac, BGMAC_MACADDR_LOW, tmp);
++	bgmac_write_mac_address(bgmac, bgmac->net_dev->dev_addr);
+ 
+ 	if (bgmac->loopback)
+-		bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, true);
++		bgmac_cmdcfg_maskset(bgmac, ~0, BGMAC_CMDCFG_ML, false);
+ 	else
+-		bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, true);
++		bgmac_cmdcfg_maskset(bgmac, ~BGMAC_CMDCFG_ML, 0, false);
+ 
+ 	bgmac_write(bgmac, BGMAC_RXMAX_LENGTH, 32 + ETHER_MAX_LEN);
+ 
+@@ -1160,6 +1178,19 @@ static netdev_tx_t bgmac_start_xmit(stru
+ 	return bgmac_dma_tx_add(bgmac, ring, skb);
+ }
+ 
++static int bgmac_set_mac_address(struct net_device *net_dev, void *addr)
++{
++	struct bgmac *bgmac = netdev_priv(net_dev);
++	int ret;
++
++	ret = eth_prepare_mac_addr_change(net_dev, addr);
++	if (ret < 0)
++		return ret;
++	bgmac_write_mac_address(bgmac, (u8 *)addr);
++	eth_commit_mac_addr_change(net_dev, addr);
++	return 0;
++}
++
+ static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
+ {
+ 	struct bgmac *bgmac = netdev_priv(net_dev);
+@@ -1190,7 +1221,9 @@ static const struct net_device_ops bgmac
+ 	.ndo_open		= bgmac_open,
+ 	.ndo_stop		= bgmac_stop,
+ 	.ndo_start_xmit		= bgmac_start_xmit,
+-	.ndo_set_mac_address	= eth_mac_addr, /* generic, sets dev_addr */
++	.ndo_set_rx_mode	= bgmac_set_rx_mode,
++	.ndo_set_mac_address	= bgmac_set_mac_address,
++	.ndo_validate_addr	= eth_validate_addr,
+ 	.ndo_do_ioctl           = bgmac_ioctl,
+ };
+ 
+@@ -1290,6 +1323,12 @@ static int bgmac_probe(struct bcma_devic
+ 		return -ENOTSUPP;
+ 	}
+ 
++	if (!is_valid_ether_addr(mac)) {
++		dev_err(&core->dev, "Invalid MAC addr: %pM\n", mac);
++		eth_random_addr(mac);
++		dev_warn(&core->dev, "Using random MAC: %pM\n", mac);
++	}
++
+ 	/* Allocation and references */
+ 	net_dev = alloc_etherdev(sizeof(*bgmac));
+ 	if (!net_dev)
+--- a/drivers/net/ethernet/broadcom/bgmac.h
++++ b/drivers/net/ethernet/broadcom/bgmac.h
+@@ -339,7 +339,7 @@
+ #define BGMAC_CHIPCTL_1_SW_TYPE_EPHY		0x00000000
+ #define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII		0x00000040
+ #define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII	0x00000080
+-#define BGMAC_CHIPCTL_1_SW_TYPE_RGMI		0x000000C0
++#define BGMAC_CHIPCTL_1_SW_TYPE_RGMII		0x000000C0
+ #define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS		0x00010000
+ 
+ #define BGMAC_SPEED_10				0x0001
+@@ -450,7 +450,4 @@ static inline void bgmac_set(struct bgma
+ 	bgmac_maskset(bgmac, offset, ~0, set);
+ }
+ 
+-u16 bgmac_phy_read(struct bgmac *bgmac, u8 phyaddr, u8 reg);
+-void bgmac_phy_write(struct bgmac *bgmac, u8 phyaddr, u8 reg, u16 value);
+-
+ #endif /* _BGMAC_H */
diff --git a/target/linux/brcm47xx/patches-3.8/812-disable_wgt634u_crap.patch b/target/linux/brcm47xx/patches-3.8/812-disable_wgt634u_crap.patch
new file mode 100644
index 0000000..10ebcb4
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/812-disable_wgt634u_crap.patch
@@ -0,0 +1,184 @@
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -6,4 +6,3 @@
+ obj-y 				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+ obj-y				+= board.o
+ obj-y 				+= gpio.o
+-obj-$(CONFIG_BCM47XX_SSB)	+= wgt634u.o
+--- a/arch/mips/bcm47xx/wgt634u.c
++++ /dev/null
+@@ -1,174 +0,0 @@
+-/*
+- * This file is subject to the terms and conditions of the GNU General Public
+- * License.  See the file "COPYING" in the main directory of this archive
+- * for more details.
+- *
+- * Copyright (C) 2007 Aurelien Jarno <aurelien@aurel32.net>
+- */
+-
+-#include <linux/platform_device.h>
+-#include <linux/module.h>
+-#include <linux/leds.h>
+-#include <linux/mtd/physmap.h>
+-#include <linux/ssb/ssb.h>
+-#include <linux/ssb/ssb_embedded.h>
+-#include <linux/interrupt.h>
+-#include <linux/reboot.h>
+-#include <linux/gpio.h>
+-#include <asm/mach-bcm47xx/bcm47xx.h>
+-
+-/* GPIO definitions for the WGT634U */
+-#define WGT634U_GPIO_LED	3
+-#define WGT634U_GPIO_RESET	2
+-#define WGT634U_GPIO_TP1	7
+-#define WGT634U_GPIO_TP2	6
+-#define WGT634U_GPIO_TP3	5
+-#define WGT634U_GPIO_TP4	4
+-#define WGT634U_GPIO_TP5	1
+-
+-static struct gpio_led wgt634u_leds[] = {
+-	{
+-		.name = "power",
+-		.gpio = WGT634U_GPIO_LED,
+-		.active_low = 1,
+-		.default_trigger = "heartbeat",
+-	},
+-};
+-
+-static struct gpio_led_platform_data wgt634u_led_data = {
+-	.num_leds =     ARRAY_SIZE(wgt634u_leds),
+-	.leds =         wgt634u_leds,
+-};
+-
+-static struct platform_device wgt634u_gpio_leds = {
+-	.name =         "leds-gpio",
+-	.id =           -1,
+-	.dev = {
+-		.platform_data = &wgt634u_led_data,
+-	}
+-};
+-
+-
+-/* 8MiB flash. The struct mtd_partition matches original Netgear WGT634U
+-   firmware. */
+-static struct mtd_partition wgt634u_partitions[] = {
+-	{
+-		.name       = "cfe",
+-		.offset     = 0,
+-		.size       = 0x60000,		/* 384k */
+-		.mask_flags = MTD_WRITEABLE 	/* force read-only */
+-	},
+-	{
+-		.name   = "config",
+-		.offset = 0x60000,
+-		.size   = 0x20000		/* 128k */
+-	},
+-	{
+-		.name   = "linux",
+-		.offset = 0x80000,
+-		.size   = 0x140000 		/* 1280k */
+-	},
+-	{
+-		.name   = "jffs",
+-		.offset = 0x1c0000,
+-		.size   = 0x620000 		/* 6272k */
+-	},
+-	{
+-		.name   = "nvram",
+-		.offset = 0x7e0000,
+-		.size   = 0x20000		/* 128k */
+-	},
+-};
+-
+-static struct physmap_flash_data wgt634u_flash_data = {
+-	.parts    = wgt634u_partitions,
+-	.nr_parts = ARRAY_SIZE(wgt634u_partitions)
+-};
+-
+-static struct resource wgt634u_flash_resource = {
+-	.flags = IORESOURCE_MEM,
+-};
+-
+-static struct platform_device wgt634u_flash = {
+-	.name          = "physmap-flash",
+-	.id            = 0,
+-	.dev           = { .platform_data = &wgt634u_flash_data, },
+-	.resource      = &wgt634u_flash_resource,
+-	.num_resources = 1,
+-};
+-
+-/* Platform devices */
+-static struct platform_device *wgt634u_devices[] __initdata = {
+-	&wgt634u_flash,
+-	&wgt634u_gpio_leds,
+-};
+-
+-static irqreturn_t gpio_interrupt(int irq, void *ignored)
+-{
+-	int state;
+-
+-	/* Interrupts are shared, check if the current one is
+-	   a GPIO interrupt. */
+-	if (!ssb_chipco_irq_status(&bcm47xx_bus.ssb.chipco,
+-				   SSB_CHIPCO_IRQ_GPIO))
+-		return IRQ_NONE;
+-
+-	state = gpio_get_value(WGT634U_GPIO_RESET);
+-
+-	/* Interrupt are level triggered, revert the interrupt polarity
+-	   to clear the interrupt. */
+-	ssb_gpio_polarity(&bcm47xx_bus.ssb, 1 << WGT634U_GPIO_RESET,
+-			  state ? 1 << WGT634U_GPIO_RESET : 0);
+-
+-	if (!state) {
+-		printk(KERN_INFO "Reset button pressed");
+-		ctrl_alt_del();
+-	}
+-
+-	return IRQ_HANDLED;
+-}
+-
+-static int __init wgt634u_init(void)
+-{
+-	/* There is no easy way to detect that we are running on a WGT634U
+-	 * machine. Use the MAC address as an heuristic. Netgear Inc. has
+-	 * been allocated ranges 00:09:5b:xx:xx:xx and 00:0f:b5:xx:xx:xx.
+-	 */
+-	u8 *et0mac;
+-
+-	if (bcm47xx_bus_type != BCM47XX_BUS_TYPE_SSB)
+-		return -ENODEV;
+-
+-	et0mac = bcm47xx_bus.ssb.sprom.et0mac;
+-
+-	if (et0mac[0] == 0x00 &&
+-	    ((et0mac[1] == 0x09 && et0mac[2] == 0x5b) ||
+-	     (et0mac[1] == 0x0f && et0mac[2] == 0xb5))) {
+-		struct ssb_mipscore *mcore = &bcm47xx_bus.ssb.mipscore;
+-
+-		printk(KERN_INFO "WGT634U machine detected.\n");
+-
+-		if (!request_irq(gpio_to_irq(WGT634U_GPIO_RESET),
+-				 gpio_interrupt, IRQF_SHARED,
+-				 "WGT634U GPIO", &bcm47xx_bus.ssb.chipco)) {
+-			gpio_direction_input(WGT634U_GPIO_RESET);
+-			ssb_gpio_intmask(&bcm47xx_bus.ssb,
+-					 1 << WGT634U_GPIO_RESET,
+-					 1 << WGT634U_GPIO_RESET);
+-			ssb_chipco_irq_mask(&bcm47xx_bus.ssb.chipco,
+-					    SSB_CHIPCO_IRQ_GPIO,
+-					    SSB_CHIPCO_IRQ_GPIO);
+-		}
+-
+-		wgt634u_flash_data.width = mcore->pflash.buswidth;
+-		wgt634u_flash_resource.start = mcore->pflash.window;
+-		wgt634u_flash_resource.end = mcore->pflash.window
+-					   + mcore->pflash.window_size
+-					   - 1;
+-		return platform_add_devices(wgt634u_devices,
+-					    ARRAY_SIZE(wgt634u_devices));
+-	} else
+-		return -ENODEV;
+-}
+-
+-module_init(wgt634u_init);
diff --git a/target/linux/brcm47xx/patches-3.8/820-wgt634u-nvram-fix.patch b/target/linux/brcm47xx/patches-3.8/820-wgt634u-nvram-fix.patch
new file mode 100644
index 0000000..2c135a1
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/820-wgt634u-nvram-fix.patch
@@ -0,0 +1,306 @@
+The Netgear wgt634u uses a different format for storing the 
+configuration. This patch is needed to read out the correct 
+configuration. The cfe_env.c file uses a different method way to read 
+out the configuration than the in kernel cfe config reader.
+
+--- a/arch/mips/bcm47xx/Makefile
++++ b/arch/mips/bcm47xx/Makefile
+@@ -6,3 +6,4 @@
+ obj-y 				+= irq.o nvram.o prom.o serial.o setup.o time.o sprom.o
+ obj-y				+= board.o
+ obj-y 				+= gpio.o
++obj-y 				+= cfe_env.o
+--- /dev/null
++++ b/arch/mips/bcm47xx/cfe_env.c
+@@ -0,0 +1,229 @@
++/*
++ * CFE environment variable access
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * Copyright 2006, Felix Fietkau <nbd@openwrt.org>
++ * 
++ * This program is free software; you can redistribute  it and/or modify it
++ * under  the terms of  the GNU General  Public License as published by the
++ * Free Software Foundation;  either version 2 of the  License, or (at your
++ * option) any later version.
++ */
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <asm/io.h>
++#include <asm/uaccess.h>
++
++#define NVRAM_SIZE       (0x1ff0)
++static char _nvdata[NVRAM_SIZE];
++static char _valuestr[256];
++
++/*
++ * TLV types.  These codes are used in the "type-length-value"
++ * encoding of the items stored in the NVRAM device (flash or EEPROM)
++ *
++ * The layout of the flash/nvram is as follows:
++ *
++ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
++ *
++ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
++ * The "length" field marks the length of the data section, not
++ * including the type and length fields.
++ *
++ * Environment variables are stored as follows:
++ *
++ * <type_env> <length> <flags> <name> = <value>
++ *
++ * If bit 0 (low bit) is set, the length is an 8-bit value.
++ * If bit 0 (low bit) is clear, the length is a 16-bit value
++ * 
++ * Bit 7 set indicates "user" TLVs.  In this case, bit 0 still
++ * indicates the size of the length field.  
++ *
++ * Flags are from the constants below:
++ *
++ */
++#define ENV_LENGTH_16BITS	0x00	/* for low bit */
++#define ENV_LENGTH_8BITS	0x01
++
++#define ENV_TYPE_USER		0x80
++
++#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
++#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
++
++/*
++ * The actual TLV types we support
++ */
++
++#define ENV_TLV_TYPE_END	0x00	
++#define ENV_TLV_TYPE_ENV	ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
++
++/*
++ * Environment variable flags 
++ */
++
++#define ENV_FLG_NORMAL		0x00	/* normal read/write */
++#define ENV_FLG_BUILTIN		0x01	/* builtin - not stored in flash */
++#define ENV_FLG_READONLY	0x02	/* read-only - cannot be changed */
++
++#define ENV_FLG_MASK		0xFF	/* mask of attributes we keep */
++#define ENV_FLG_ADMIN		0x100	/* lets us internally override permissions */
++
++
++/*  *********************************************************************
++    *  _nvram_read(buffer,offset,length)
++    *  
++    *  Read data from the NVRAM device
++    *  
++    *  Input parameters: 
++    *  	   buffer - destination buffer
++    *  	   offset - offset of data to read
++    *  	   length - number of bytes to read
++    *  	   
++    *  Return value:
++    *  	   number of bytes read, or <0 if error occured
++    ********************************************************************* */
++static int
++_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
++{
++    int i;
++    if (offset > NVRAM_SIZE)
++	return -1; 
++
++    for ( i = 0; i < length; i++) {
++	buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
++    }
++    return length;
++}
++
++
++static char*
++_strnchr(const char *dest,int c,size_t cnt)
++{
++	while (*dest && (cnt > 0)) {
++	if (*dest == c) return (char *) dest;
++	dest++;
++	cnt--;
++	}
++	return NULL;
++}
++
++
++
++/*
++ * Core support API: Externally visible.
++ */
++
++/*
++ * Get the value of an NVRAM variable
++ * @param	name	name of variable to get
++ * @return	value of variable or NULL if undefined
++ */
++
++char* 
++cfe_env_get(unsigned char *nv_buf, char* name)
++{
++    int size;
++    unsigned char *buffer;
++    unsigned char *ptr;
++    unsigned char *envval;
++    unsigned int reclen;
++    unsigned int rectype;
++    int offset;
++    int flg;
++    
++	if (!strcmp(name, "nvram_type"))
++		return "cfe";
++	
++    size = NVRAM_SIZE;
++    buffer = &_nvdata[0];
++
++    ptr = buffer;
++    offset = 0;
++
++    /* Read the record type and length */
++    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++	goto error;
++    }
++    
++    while ((*ptr != ENV_TLV_TYPE_END)  && (size > 1)) {
++
++	/* Adjust pointer for TLV type */
++	rectype = *(ptr);
++	offset++;
++	size--;
++
++	/* 
++	 * Read the length.  It can be either 1 or 2 bytes
++	 * depending on the code 
++	 */
++	if (rectype & ENV_LENGTH_8BITS) {
++	    /* Read the record type and length - 8 bits */
++	    if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
++		goto error;
++	    }
++	    reclen = *(ptr);
++	    size--;
++	    offset++;
++	}
++	else {
++	    /* Read the record type and length - 16 bits, MSB first */
++	    if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
++		goto error;
++	    }
++	    reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
++	    size -= 2;
++	    offset += 2;
++	}
++
++	if (reclen > size)
++	    break;	/* should not happen, bad NVRAM */
++
++	switch (rectype) {
++	    case ENV_TLV_TYPE_ENV:
++		/* Read the TLV data */
++		if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
++		    goto error;
++		flg = *ptr++;
++		envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
++		if (envval) {
++		    *envval++ = '\0';
++		    memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
++		    _valuestr[(reclen-1)-(envval-ptr)] = '\0';
++#if 0			
++		    printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
++#endif
++		    if(!strcmp(ptr, name)){
++			return _valuestr;
++		    }
++		    if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
++			return _valuestr;
++		}
++		break;
++		
++	    default: 
++		/* Unknown TLV type, skip it. */
++		break;
++	    }
++
++	/*
++	 * Advance to next TLV 
++	 */
++		
++	size -= (int)reclen;
++	offset += reclen;
++
++	/* Read the next record type */
++	ptr = buffer;
++	if (_nvram_read(nv_buf, ptr,offset,1) != 1)
++	    goto error;
++	}
++
++error:
++    return NULL;
++
++}
++
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -22,6 +22,8 @@
+ #include <asm/mach-bcm47xx/bcm47xx.h>
+ 
+ static char nvram_buf[NVRAM_SPACE];
++static int cfe_env;
++extern char *cfe_env_get(char *nv_buf, const char *name);
+ 
+ static u32 find_nvram_size(u32 end)
+ {
+@@ -47,6 +49,26 @@ static int nvram_find_and_copy(u32 base,
+ 	u32 *src, *dst;
+ 	u32 size;
+ 
++	cfe_env = 0;
++
++	/* XXX: hack for supporting the CFE environment stuff on WGT634U */
++	if (lim >= 8 * 1024 * 1024) {
++		src = (u32 *) KSEG1ADDR(base + 8 * 1024 * 1024 - 0x2000);
++		dst = (u32 *) nvram_buf;
++
++		if ((*src & 0xff00ff) == 0x000001) {
++			printk("early_nvram_init: WGT634U NVRAM found.\n");
++
++			for (i = 0; i < 0x1ff0; i++) {
++				if (*src == 0xFFFFFFFF)
++					break;
++				*dst++ = *src++;
++			}
++			cfe_env = 1;
++			return 0;
++		}
++	}
++
+ 	/* TODO: when nvram is on nand flash check for bad blocks first. */
+ 	off = FLASH_MIN;
+ 	while (off <= lim) {
+@@ -181,6 +203,13 @@ int bcm47xx_nvram_getenv(char *name, cha
+ 			return err;
+ 	}
+ 
++	if (cfe_env) {
++		value = cfe_env_get(nvram_buf, name);
++		if (!value)
++			return -ENOENT;
++		return snprintf(val, val_len, "%s", value);
++	}
++
+ 	/* Look for name=value and return value */
+ 	var = &nvram_buf[sizeof(struct nvram_header)];
+ 	end = nvram_buf + sizeof(nvram_buf) - 2;
+@@ -209,6 +238,9 @@ char *nvram_get(const char *name)
+ 	if (!nvram_buf[0])
+ 		nvram_init();
+ 
++	if (cfe_env)
++		return cfe_env_get(nvram_buf, name);
++
+ 	/* Look for name=value and return value */
+ 	var = &nvram_buf[sizeof(struct nvram_header)];
+ 	end = nvram_buf + sizeof(nvram_buf) - 2;
diff --git a/target/linux/brcm47xx/patches-3.8/920-cache-wround.patch b/target/linux/brcm47xx/patches-3.8/920-cache-wround.patch
new file mode 100644
index 0000000..31c24d0
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/920-cache-wround.patch
@@ -0,0 +1,138 @@
+--- a/arch/mips/include/asm/r4kcache.h
++++ b/arch/mips/include/asm/r4kcache.h
+@@ -20,10 +20,28 @@
+ #ifdef CONFIG_BCM47XX
+ #include <asm/paccess.h>
+ #include <linux/ssb/ssb.h>
+-#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE)))
++#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
++
++static inline unsigned long bcm4710_dummy_rreg(void)
++{
++      return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
++}
++
++#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
++
++static inline unsigned long bcm4710_fill_tlb(void *addr)
++{
++      return *(unsigned long *)addr;
++}
++
++#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
++
++static inline void bcm4710_protected_fill_tlb(void *addr)
++{
++      unsigned long x;
++      get_dbe(x, (unsigned long *)addr);;
++}
+ 
+-#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr))
+-#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); })
+ #else
+ #define BCM4710_DUMMY_RREG()
+ 
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -972,6 +972,9 @@ build_get_pgde32(u32 **p, unsigned int t
+ #endif
+ 	uasm_i_addu(p, ptr, tmp, ptr);
+ #else
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++#endif
+ 	UASM_i_LA_mostly(p, ptr, pgdc);
+ #endif
+ 	uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
+@@ -1314,12 +1317,12 @@ static void __cpuinit build_r4000_tlb_re
+ 			/* No need for uasm_i_nop */
+ 		}
+ 
+-#ifdef CONFIG_BCM47XX
+-		uasm_i_nop(&p);
+-#endif
+ #ifdef CONFIG_64BIT
+ 		build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
+ #else
++# ifdef CONFIG_BCM47XX
++		uasm_i_nop(&p);
++# endif
+ 		build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
+ #endif
+ 
+@@ -1331,6 +1334,9 @@ static void __cpuinit build_r4000_tlb_re
+ 		build_update_entries(&p, K0, K1);
+ 		build_tlb_write_entry(&p, &l, &r, tlb_random);
+ 		uasm_l_leave(&l, p);
++#ifdef CONFIG_BCM47XX
++		uasm_i_nop(&p);
++#endif
+ 		uasm_i_eret(&p); /* return from trap */
+ 	}
+ #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
+@@ -1848,12 +1854,12 @@ build_r4000_tlbchange_handler_head(u32 *
+ {
+ 	struct work_registers wr = build_get_work_registers(p);
+ 
+-#ifdef CONFIG_BCM47XX
+-	uasm_i_nop(p);
+-#endif
+ #ifdef CONFIG_64BIT
+ 	build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
+ #else
++# ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++# endif
+ 	build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
+ #endif
+ 
+@@ -1892,6 +1898,9 @@ build_r4000_tlbchange_handler_tail(u32 *
+ 	build_tlb_write_entry(p, l, r, tlb_indexed);
+ 	uasm_l_leave(l, *p);
+ 	build_restore_work_registers(p);
++#ifdef CONFIG_BCM47XX
++	uasm_i_nop(p);
++#endif
+ 	uasm_i_eret(p); /* return from trap */
+ 
+ #ifdef CONFIG_64BIT
+--- a/arch/mips/kernel/genex.S
++++ b/arch/mips/kernel/genex.S
+@@ -21,6 +21,19 @@
+ #include <asm/war.h>
+ #include <asm/thread_info.h>
+ 
++#ifdef CONFIG_BCM47XX
++# ifdef eret
++#  undef eret
++# endif
++# define eret 					\
++	.set push;				\
++	.set noreorder;				\
++	 nop; 					\
++	 nop;					\
++	 eret;					\
++	.set pop;
++#endif
++
+ #define PANIC_PIC(msg)					\
+ 		.set push;				\
+ 		.set	reorder;			\
+@@ -53,7 +66,6 @@ NESTED(except_vec3_generic, 0, sp)
+ 	.set	noat
+ #ifdef CONFIG_BCM47XX
+ 	nop
+-	nop
+ #endif
+ #if R5432_CP0_INTERRUPT_WAR
+ 	mfc0	k0, CP0_INDEX
+@@ -78,6 +90,9 @@ NESTED(except_vec3_r4000, 0, sp)
+ 	.set	push
+ 	.set	mips3
+ 	.set	noat
++#ifdef CONFIG_BCM47XX
++	nop
++#endif
+ 	mfc0	k1, CP0_CAUSE
+ 	li	k0, 31<<2
+ 	andi	k1, k1, 0x7c
diff --git a/target/linux/brcm47xx/patches-3.8/940-bcm47xx-yenta.patch b/target/linux/brcm47xx/patches-3.8/940-bcm47xx-yenta.patch
new file mode 100644
index 0000000..1739ff7
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/940-bcm47xx-yenta.patch
@@ -0,0 +1,46 @@
+--- a/drivers/pcmcia/yenta_socket.c
++++ b/drivers/pcmcia/yenta_socket.c
+@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
+ 	 * Probe for usable interrupts using the force
+ 	 * register to generate bogus card status events.
+ 	 */
++#ifndef CONFIG_BCM47XX
++	/* WRT54G3G does not like this */
+ 	cb_writel(socket, CB_SOCKET_EVENT, -1);
+ 	cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
+ 	reg = exca_readb(socket, I365_CSCINT);
+@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
+ 	}
+ 	cb_writel(socket, CB_SOCKET_MASK, 0);
+ 	exca_writeb(socket, I365_CSCINT, reg);
++#endif
+ 
+ 	mask = probe_irq_mask(val) & 0xffff;
+ 
+@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
+ 	else
+ 		socket->socket.irq_mask = 0;
+ 
++	/* irq mask probing is broken for the WRT54G3G */
++	if (socket->socket.irq_mask == 0)
++		socket->socket.irq_mask = 0x6f8;
++
+ 	dev_printk(KERN_INFO, &socket->dev->dev,
+ 		   "ISA IRQ mask 0x%04x, PCI irq %d\n",
+ 		   socket->socket.irq_mask, socket->cb_irq);
+@@ -1257,6 +1264,15 @@ static int yenta_probe(struct pci_dev *d
+ 	dev_printk(KERN_INFO, &dev->dev,
+ 		   "Socket status: %08x\n", cb_readl(socket, CB_SOCKET_STATE));
+ 
++	/* Generate an interrupt on card insert/remove */
++	config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
++
++	/* Set up Multifunction Routing Status Register */
++	config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
++
++	/* Switch interrupts to parallelized */
++	config_writeb(socket, 0x92, 0x64);
++
+ 	yenta_fixup_parent_bridge(dev->subordinate);
+ 
+ 	/* Register it with the pcmcia layer.. */
diff --git a/target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch b/target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch
new file mode 100644
index 0000000..0dc2d5f
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/976-ssb_increase_pci_delay.patch
@@ -0,0 +1,11 @@
+--- a/drivers/ssb/driver_pcicore.c
++++ b/drivers/ssb/driver_pcicore.c
+@@ -376,7 +376,7 @@ static void ssb_pcicore_init_hostmode(st
+ 	set_io_port_base(ssb_pcicore_controller.io_map_base);
+ 	/* Give some time to the PCI controller to configure itself with the new
+ 	 * values. Not waiting at this point causes crashes of the machine. */
+-	mdelay(10);
++	mdelay(300);
+ 	register_pci_controller(&ssb_pcicore_controller);
+ }
+ 
diff --git a/target/linux/brcm47xx/patches-3.8/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.8/980-wnr834b_no_cardbus_invariant.patch
new file mode 100644
index 0000000..4550676
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/980-wnr834b_no_cardbus_invariant.patch
@@ -0,0 +1,13 @@
+--- a/arch/mips/bcm47xx/setup.c
++++ b/arch/mips/bcm47xx/setup.c
+@@ -120,6 +120,10 @@ static int bcm47xx_get_invariants(struct
+ 	if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ 		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
+ 
++	/* Do not indicate cardbus for Netgear WNR834B V1 and V2 */
++	if (iv->boardinfo.type == 0x0472 && iv->has_cardbus_slot)
++		iv->has_cardbus_slot = 0;
++
+ 	return 0;
+ }
+ 
diff --git a/target/linux/brcm47xx/patches-3.8/999-wl_exports.patch b/target/linux/brcm47xx/patches-3.8/999-wl_exports.patch
new file mode 100644
index 0000000..d40f467
--- /dev/null
+++ b/target/linux/brcm47xx/patches-3.8/999-wl_exports.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm47xx/nvram.c
++++ b/arch/mips/bcm47xx/nvram.c
+@@ -21,7 +21,8 @@
+ #include <bcm47xx_nvram.h>
+ #include <asm/mach-bcm47xx/bcm47xx.h>
+ 
+-static char nvram_buf[NVRAM_SPACE];
++char nvram_buf[NVRAM_SPACE];
++EXPORT_SYMBOL(nvram_buf);
+ static int cfe_env;
+ extern char *cfe_env_get(char *nv_buf, const char *name);
+ 
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ 
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+ 
+ #endif /* CONFIG_DMA_NONCOHERENT */
+