fix PCI resouce allocation for SSB PCI host bridge

The defined offset is wrong and the fixup-code overrides it
later on so that it never gets used for most PCI devices.
Unfortunately the yenta-socket allocates its own resources
and crashes because of the wrong mem_offset.

It seems that the offset and fixup code came from 2.4 where
resource allocation was handled differently.

This patch removes the unneeded parts and thus enables
the yenta_socket on the WRT54G3G platform.

It was tested on Asus WL500G-Premium (v1 and v2), Linksys
WRT54G3G, Netgear WGT634U

Signed-off-by: Michael Buesch <mb@bu3sch.de>

SVN-Revision: 20239

2 files changed, 106 insertions, 0 deletions

diff --git a/target/linux/brcm47xx/patches-2.6.32/930-bcm47xx-pci-iomem.patch b/target/linux/brcm47xx/patches-2.6.32/930-bcm47xx-pci-iomem.patch
new file mode 100644
index 0000000..1ceccb5
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.32/930-bcm47xx-pci-iomem.patch
@@ -0,0 +1,53 @@
+Index: linux-2.6.33/drivers/ssb/driver_pcicore.c
+===================================================================
+--- linux-2.6.33.orig/drivers/ssb/driver_pcicore.c	2010-03-15 14:52:55.000000000 +0100
++++ linux-2.6.33/drivers/ssb/driver_pcicore.c	2010-03-15 15:57:38.000000000 +0100
+@@ -246,20 +246,12 @@
+ 	.pci_ops	= &ssb_pcicore_pciops,
+ 	.io_resource	= &ssb_pcicore_io_resource,
+ 	.mem_resource	= &ssb_pcicore_mem_resource,
+-	.mem_offset	= 0x24000000,
+ };
+ 
+-static u32 ssb_pcicore_pcibus_iobase = 0x100;
+-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
+-
+ /* This function is called when doing a pci_enable_device().
+  * We must first check if the device is a device on the PCI-core bridge. */
+ int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+ {
+-	struct resource *res;
+-	int pos, size;
+-	u32 *base;
+-
+ 	if (d->bus->ops != &ssb_pcicore_pciops) {
+ 		/* This is not a device on the PCI-core bridge. */
+ 		return -ENODEV;
+@@ -268,27 +260,6 @@
+ 	ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+ 		   pci_name(d));
+ 
+-	/* Fix up resource bases */
+-	for (pos = 0; pos < 6; pos++) {
+-		res = &d->resource[pos];
+-		if (res->flags & IORESOURCE_IO)
+-			base = &ssb_pcicore_pcibus_iobase;
+-		else
+-			base = &ssb_pcicore_pcibus_membase;
+-		res->flags |= IORESOURCE_PCI_FIXED;
+-		if (res->end) {
+-			size = res->end - res->start + 1;
+-			if (*base & (size - 1))
+-				*base = (*base + size) & ~(size - 1);
+-			res->start = *base;
+-			res->end = res->start + size - 1;
+-			*base += size;
+-			pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
+-		}
+-		/* Fix up PCI bridge BAR0 only */
+-		if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
+-			break;
+-	}
+ 	/* Fix up interrupt lines */
+ 	d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+ 	pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
diff --git a/target/linux/brcm47xx/patches-2.6.33/930-bcm47xx-pci-iomem.patch b/target/linux/brcm47xx/patches-2.6.33/930-bcm47xx-pci-iomem.patch
new file mode 100644
index 0000000..1ceccb5
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.33/930-bcm47xx-pci-iomem.patch
@@ -0,0 +1,53 @@
+Index: linux-2.6.33/drivers/ssb/driver_pcicore.c
+===================================================================
+--- linux-2.6.33.orig/drivers/ssb/driver_pcicore.c	2010-03-15 14:52:55.000000000 +0100
++++ linux-2.6.33/drivers/ssb/driver_pcicore.c	2010-03-15 15:57:38.000000000 +0100
+@@ -246,20 +246,12 @@
+ 	.pci_ops	= &ssb_pcicore_pciops,
+ 	.io_resource	= &ssb_pcicore_io_resource,
+ 	.mem_resource	= &ssb_pcicore_mem_resource,
+-	.mem_offset	= 0x24000000,
+ };
+ 
+-static u32 ssb_pcicore_pcibus_iobase = 0x100;
+-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
+-
+ /* This function is called when doing a pci_enable_device().
+  * We must first check if the device is a device on the PCI-core bridge. */
+ int ssb_pcicore_plat_dev_init(struct pci_dev *d)
+ {
+-	struct resource *res;
+-	int pos, size;
+-	u32 *base;
+-
+ 	if (d->bus->ops != &ssb_pcicore_pciops) {
+ 		/* This is not a device on the PCI-core bridge. */
+ 		return -ENODEV;
+@@ -268,27 +260,6 @@
+ 	ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+ 		   pci_name(d));
+ 
+-	/* Fix up resource bases */
+-	for (pos = 0; pos < 6; pos++) {
+-		res = &d->resource[pos];
+-		if (res->flags & IORESOURCE_IO)
+-			base = &ssb_pcicore_pcibus_iobase;
+-		else
+-			base = &ssb_pcicore_pcibus_membase;
+-		res->flags |= IORESOURCE_PCI_FIXED;
+-		if (res->end) {
+-			size = res->end - res->start + 1;
+-			if (*base & (size - 1))
+-				*base = (*base + size) & ~(size - 1);
+-			res->start = *base;
+-			res->end = res->start + size - 1;
+-			*base += size;
+-			pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
+-		}
+-		/* Fix up PCI bridge BAR0 only */
+-		if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
+-			break;
+-	}
+ 	/* Fix up interrupt lines */
+ 	d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+ 	pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);