summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/base-files
diff options
context:
space:
mode:
authorFlorian Fainelli <florian@openwrt.org>2011-05-20 10:06:15 +0000
committerFlorian Fainelli <florian@openwrt.org>2011-05-20 10:06:15 +0000
commit3e83f60a6658cfc6e62f9f599efbe8f779a41b4e (patch)
tree99d9262639aad08d3c3f014e8d127be666085356 /target/linux/brcm63xx/base-files
parentf9f8dcfa705d84666a58aa71054d0223421f2005 (diff)
downloadmtk-20170518-3e83f60a6658cfc6e62f9f599efbe8f779a41b4e.zip
mtk-20170518-3e83f60a6658cfc6e62f9f599efbe8f779a41b4e.tar.gz
mtk-20170518-3e83f60a6658cfc6e62f9f599efbe8f779a41b4e.tar.bz2
add support for D-Link DVA-G3810BN/TL
This patch adds support for D-Link's DVA-G3810BN/TL product. Signed-off-by: Roman Dumycz <roman@secureas.com> SVN-Revision: 26956
Diffstat (limited to 'target/linux/brcm63xx/base-files')
-rw-r--r--target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network29
-rwxr-xr-xtarget/linux/brcm63xx/base-files/etc/init.d/defconfig4
2 files changed, 33 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network b/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network
new file mode 100644
index 0000000..181ca01
--- /dev/null
+++ b/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network
@@ -0,0 +1,29 @@
+# Copyright (C) 2008 OpenWrt.org
+
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option type bridge
+ option ifname eth1.1
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+ option nat 1
+
+config interface wan
+ option ifname eth0
+ option proto dhcp
+
+config switch eth1
+ option enable 1
+ option enable_vlan 1
+ option reset 1
+
+config switch_vlan
+ option vlan 1
+ option device eth1
+ option ports "0 1 2 3 5t"
diff --git a/target/linux/brcm63xx/base-files/etc/init.d/defconfig b/target/linux/brcm63xx/base-files/etc/init.d/defconfig
index dac9c23..8fd783d 100755
--- a/target/linux/brcm63xx/base-files/etc/init.d/defconfig
+++ b/target/linux/brcm63xx/base-files/etc/init.d/defconfig
@@ -8,6 +8,10 @@ START=05
start() {
local board=$(awk 'BEGIN{FS="[ \t:/]+"} /system type/ {print $4}' /proc/cpuinfo)
+ if [ "$board" = "96358VW" ] && [ -e /proc/switch/eth1/enable ]; then
+ board="DVAG3810BN"
+ fi
+
[ ! -d /etc/defconfig/$board ] && board="generic"
for f in $( ls /etc/defconfig/$board ); do