summaryrefslogtreecommitdiff
path: root/target/linux/brcm63xx/base-files
diff options
context:
space:
mode:
authorJonas Gorski <jogo@openwrt.org>2015-05-21 19:31:54 +0000
committerJonas Gorski <jogo@openwrt.org>2015-05-21 19:31:54 +0000
commit509c3211d66ec5d3bc741361c06eff993bf39b85 (patch)
treeb621d227112a6e8a32bec3d59d29e4304938e57c /target/linux/brcm63xx/base-files
parent8304c0c04d4ab254d4b2ac2467f70e927b553a1a (diff)
downloadmtk-20170518-509c3211d66ec5d3bc741361c06eff993bf39b85.zip
mtk-20170518-509c3211d66ec5d3bc741361c06eff993bf39b85.tar.gz
mtk-20170518-509c3211d66ec5d3bc741361c06eff993bf39b85.tar.bz2
brcm63xx: Add Huawei HG655b support
This patch adds support for the Huawei HG655b. Nothing much special in this router, it's just another BCM6368 with a Ralink RT3062 wifi chip and the calibration data embedded in the main flash chip at offset 0x7c0000. There is also configuration data used by the OEM firmware before the cal_data partition, this area is protected by the board_data partition in this patch. Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45708
Diffstat (limited to 'target/linux/brcm63xx/base-files')
-rw-r--r--target/linux/brcm63xx/base-files/etc/diag.sh3
-rw-r--r--target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom3
-rw-r--r--target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds3
-rw-r--r--target/linux/brcm63xx/base-files/etc/uci-defaults/02_network1
-rwxr-xr-xtarget/linux/brcm63xx/base-files/lib/brcm63xx.sh3
5 files changed, 13 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
index 03d98b9..c330674 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -89,6 +89,9 @@ set_state() {
hg520)
status_led="HW520:green:net"
;;
+ hg655b)
+ status_led="HW65x:green:power"
+ ;;
p870hw-51a_v2)
status_led="P870HW-51a:green:power"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index 9a324ea..4347485 100644
--- a/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/brcm63xx/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -34,6 +34,9 @@ case "$FIRMWARE" in
hg556a_c)
rt2x00_eeprom_extract "cal_data" 130560 512
;;
+ hg655b)
+ rt2x00_eeprom_extract "cal_data" 0 512
+ ;;
*)
rt2x00_eeprom_die "board $board is not supported yet"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
index 58404a1..b964bdb 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds
@@ -34,6 +34,9 @@ hg556a_*)
ucidef_set_led_netdev "lan" "LAN" "HW556:red:dsl" "eth0"
ucidef_set_led_usbdev "usb" "USB" "HW556:red:hspa" "1-2"
;;
+hg655b)
+ ucidef_set_led_usbdev "usb" "USB" "HW65x:green:usb" "1-2"
+ ;;
homehub2a)
ucidef_set_led_netdev "lan" "LAN" "HOMEHUB2A:blue:broadband" "eth0.1"
ucidef_set_led_netdev "wlan0" "WIFI" "HOMEHUB2A:green:wireless" "wlan0"
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
index 814e100..e5880eb 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network
@@ -92,6 +92,7 @@ dsl-274xb-f |\
dsl-275xb-d |\
fast2504n |\
fast2704v2 |\
+hg655b |\
p870hw-51a_v2 |\
vr-3025un |\
vr-3025u)
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 5cb390f..0eb9a75 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -156,6 +156,9 @@ brcm63xx_dt_detect() {
"Huawei EchoLife HG556a (version C)")
board_name="hg556a_c"
;;
+ "Huawei HG655b")
+ board_name="hg655b"
+ ;;
"Inteno VG50")
board_name="vg50"
;;