brcm63xx: switch to 3.14

Now that BB is branched off, we can now switch to 3.14 and start
breaking stuff again.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41941

1 files changed, 0 insertions, 68 deletions

diff --git a/target/linux/brcm63xx/patches-3.10/529-board_fast2604.patch b/target/linux/brcm63xx/patches-3.10/529-board_fast2604.patch
deleted file mode 100644
index a6bbabd..0000000
--- a/target/linux/brcm63xx/patches-3.10/529-board_fast2604.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1051,6 +1051,57 @@ static struct board_info __initdata boar
- 	.has_ehci0			= 1,
- };
- 
-+static struct board_info __initdata board_FAST2604 = {
-+	.name						= "F@ST2604",
-+	.expected_cpu_id			= 0x6348,
-+
-+	.has_uart0					= 1,
-+	.has_pci					= 1,
-+	.has_ohci0					= 1,
-+
-+	.has_enet1					= 1,
-+	.enet1 = {
-+		.has_phy			= 1,
-+		.phy_id				= 0,
-+		.force_speed_100		= 1,
-+		.force_duplex_full		= 1,
-+	},
-+
-+	.leds = {
-+		{
-+			.name				= "F@ST2604:green:power",
-+			.gpio				= 0,
-+			.active_low			= 1,
-+			.default_trigger	= "default-on",
-+		},
-+		{
-+			.name				= "F@ST2604:red:power",
-+			.gpio				= 1,
-+			.active_low			= 1,
-+		},
-+		{
-+			.name				= "F@ST2604:red:inet",
-+			.gpio				= 4,
-+			.active_low			= 1,
-+		},
-+		{
-+			.name				= "F@ST2604:green:wps",
-+			.gpio				= 5,
-+			.active_low			= 1,
-+		},
-+	},
-+	.buttons = {
-+		{
-+			.desc				= "reset",
-+			.gpio				= 33,
-+			.active_low			= 1,
-+			.type				= EV_KEY,
-+			.code				= KEY_RESTART,
-+			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+		},
-+	},
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
- 	.name				= "RTA1025W_16",
- 	.expected_cpu_id		= 0x6348,
-@@ -2921,6 +2972,7 @@ static const struct board_info __initcon
- 	&board_96348gw_10,
- 	&board_96348gw_11,
- 	&board_FAST2404,
-+	&board_FAST2604,
- 	&board_DV201AMR,
- 	&board_96348gw_a,
- 	&board_rta1025w_16,