kernel: update 3.10 to 3.10.34

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291

3 files changed, 3 insertions, 171 deletions

diff --git a/target/linux/brcm63xx/patches-3.10/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-3.10/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
index eaf7503..154ab5c 100644
--- a/target/linux/brcm63xx/patches-3.10/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
+++ b/target/linux/brcm63xx/patches-3.10/111-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
@@ -31,7 +31,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
  static struct clk clk_usbd = {
 --- a/drivers/usb/gadget/bcm63xx_udc.c
 +++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -386,7 +386,6 @@ static inline void set_clocks(struct bcm
+@@ -392,7 +392,6 @@ static inline void set_clocks(struct bcm
  	if (is_enabled) {
  		clk_enable(udc->usbh_clk);
  		clk_enable(udc->usbd_clk);
diff --git a/target/linux/brcm63xx/patches-3.10/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-3.10/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
index 88217bd..952fd9a 100644
--- a/target/linux/brcm63xx/patches-3.10/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
+++ b/target/linux/brcm63xx/patches-3.10/112-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
@@ -108,7 +108,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
  
  #define DRV_MODULE_NAME		"bcm63xx_udc"
  
-@@ -863,22 +864,7 @@ static void bcm63xx_select_phy_mode(stru
+@@ -869,22 +870,7 @@ static void bcm63xx_select_phy_mode(stru
  		bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
  	}
  
@@ -132,7 +132,7 @@ Signed-off-by: Florian Fainelli <florian@openwrt.org>
  }
  
  /**
-@@ -892,14 +878,9 @@ static void bcm63xx_select_phy_mode(stru
+@@ -898,14 +884,9 @@ static void bcm63xx_select_phy_mode(stru
   */
  static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
  {
diff --git a/target/linux/brcm63xx/patches-3.10/205-USB-fix-bcm63xx_udc.patch b/target/linux/brcm63xx/patches-3.10/205-USB-fix-bcm63xx_udc.patch
deleted file mode 100644
index f13a13d..0000000
--- a/target/linux/brcm63xx/patches-3.10/205-USB-fix-bcm63xx_udc.patch
+++ /dev/null
@@ -1,168 +0,0 @@
-From a864a5b3efe9dce1647172d105559a1b850cf4c9 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Tue, 14 Jan 2014 15:29:25 -0800
-Subject: [PATCH] usb: gadget: bcm63xx_udc: fix build failure on DMA channel
- code
-
-Commit 3dc6475 ("bcm63xx_enet: add support Broadcom BCM6345 Ethernet")
-changed the ENETDMA[CS] macros such that they are no longer macros, but
-actual register offset definitions. The bcm63xx_udc driver was not
-updated, and as a result, causes the following build error to pop up:
-
- CC      drivers/usb/gadget/u_ether.o
-drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_write':
-drivers/usb/gadget/bcm63xx_udc.c:642:24: error: called object '0' is not
-a function
-drivers/usb/gadget/bcm63xx_udc.c: In function 'iudma_reset_channel':
-drivers/usb/gadget/bcm63xx_udc.c:698:46: error: called object '0' is not
-a function
-drivers/usb/gadget/bcm63xx_udc.c:700:49: error: called object '0' is not
-a function
-
-Fix this by updating usb_dmac_{read,write}l and usb_dmas_{read,write}l to
-take an extra channel argument, and use the channel width
-(ENETDMA_CHAN_WIDTH) to offset the register we want to access, hence
-doing again what the macro implicitely did for us.
-
-CC: Kevin Cernekee <cernekee@gmail.com>
-CC: Jonas Gorski <jogo@openwrt.org>
-CC: stable@vger.kernel.org
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
-Felipe,
-
-This is against your branch as balbi/usb.git, and this fix should be applied to
-stable 3.11 onwards.
-
-Thanks!
-
- drivers/usb/gadget/bcm63xx_udc.c | 58 ++++++++++++++++++++++------------------
- 1 file changed, 32 insertions(+), 26 deletions(-)
-
---- a/drivers/usb/gadget/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -362,24 +362,30 @@ static inline void usb_dma_writel(struct
- 	bcm_writel(val, udc->iudma_regs + off);
- }
- 
--static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
-+static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
- {
--	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
-+	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
-+			(ENETDMA_CHAN_WIDTH * chan));
- }
- 
--static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
-+static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
-+					int chan)
- {
--	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
-+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
-+			(ENETDMA_CHAN_WIDTH * chan));
- }
- 
--static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
-+static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
- {
--	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
-+	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
-+			(ENETDMA_CHAN_WIDTH * chan));
- }
- 
--static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
-+static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
-+					int chan)
- {
--	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
-+	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
-+			(ENETDMA_CHAN_WIDTH * chan));
- }
- 
- static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
-@@ -639,7 +645,7 @@ static void iudma_write(struct bcm63xx_u
- 	} while (!last_bd);
- 
- 	usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
--			ENETDMAC_CHANCFG_REG(iudma->ch_idx));
-+			ENETDMAC_CHANCFG_REG, iudma->ch_idx);
- }
- 
- /**
-@@ -695,9 +701,9 @@ static void iudma_reset_channel(struct b
- 		bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
- 
- 	/* stop DMA, then wait for the hardware to wrap up */
--	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
-+	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);
- 
--	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
-+	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
- 				   ENETDMAC_CHANCFG_EN_MASK) {
- 		udelay(1);
- 
-@@ -714,10 +720,10 @@ static void iudma_reset_channel(struct b
- 			dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
- 				 ch_idx);
- 			usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
--					ENETDMAC_CHANCFG_REG(ch_idx));
-+					ENETDMAC_CHANCFG_REG, ch_idx);
- 		}
- 	}
--	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
-+	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);
- 
- 	/* don't leave "live" HW-owned entries for the next guy to step on */
- 	for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
-@@ -729,11 +735,11 @@ static void iudma_reset_channel(struct b
- 
- 	/* set up IRQs, UBUS burst size, and BD base for this channel */
- 	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
--			ENETDMAC_IRMASK_REG(ch_idx));
--	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
-+			ENETDMAC_IRMASK_REG, ch_idx);
-+	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);
- 
--	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
--	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
-+	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
-+	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
- }
- 
- /**
-@@ -2016,7 +2022,7 @@ static irqreturn_t bcm63xx_udc_data_isr(
- 	spin_lock(&udc->lock);
- 
- 	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
--			ENETDMAC_IR_REG(iudma->ch_idx));
-+			ENETDMAC_IR_REG, iudma->ch_idx);
- 	bep = iudma->bep;
- 	rc = iudma_read(udc, iudma);
- 
-@@ -2156,18 +2162,18 @@ static int bcm63xx_iudma_dbg_show(struct
- 		seq_printf(s, " [ep%d]:\n",
- 			   max_t(int, iudma_defaults[ch_idx].ep_num, 0));
- 		seq_printf(s, "  cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
--			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
--			   usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
--			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
--			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx)));
-+			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
-+			   usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx),
-+			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
-+			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx));
- 
--		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
--		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
-+		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
-+		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
- 		seq_printf(s, "  base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
--			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
-+			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
- 			   sram2 >> 16, sram2 & 0xffff,
- 			   sram3 >> 16, sram3 & 0xffff,
--			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
-+			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
- 		seq_printf(s, "  desc: %d/%d used", iudma->n_bds_used,
- 			   iudma->n_bds);
-