brcm63xx: fix USB gadget build failure after 6345 Ethernet

While adding support for BCM6345 Ethernet, some changes in the macros
ENETDMA{C,S} where introduced which now make the bcm63xx USB gadget
driver fail to build. Fix this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39279

1 files changed, 127 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/patches-3.10/205-USB-fix-bcm63xx_udc.patch b/target/linux/brcm63xx/patches-3.10/205-USB-fix-bcm63xx_udc.patch
new file mode 100644
index 0000000..dfe709c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/205-USB-fix-bcm63xx_udc.patch
@@ -0,0 +1,127 @@
+--- a/drivers/usb/gadget/bcm63xx_udc.c
++++ b/drivers/usb/gadget/bcm63xx_udc.c
+@@ -362,24 +362,30 @@ static inline void usb_dma_writel(struct
+ 	bcm_writel(val, udc->iudma_regs + off);
+ }
+ 
+-static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off)
++static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan)
+ {
+-	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
++	return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
++			(ENETDMA_CHAN_WIDTH * chan));
+ }
+ 
+-static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
++static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
++					int chan)
+ {
+-	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off);
++	bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off +
++			(ENETDMA_CHAN_WIDTH* chan));
+ }
+ 
+-static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off)
++static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan)
+ {
+-	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
++	return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
++			(ENETDMA_CHAN_WIDTH* chan));
+ }
+ 
+-static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off)
++static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off,
++					int chan)
+ {
+-	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off);
++	bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off +
++			(ENETDMA_CHAN_WIDTH * chan));
+ }
+ 
+ static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled)
+@@ -639,7 +645,7 @@ static void iudma_write(struct bcm63xx_u
+ 	} while (!last_bd);
+ 
+ 	usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK,
+-			ENETDMAC_CHANCFG_REG(iudma->ch_idx));
++			ENETDMAC_CHANCFG_REG, iudma->ch_idx);
+ }
+ 
+ /**
+@@ -695,9 +701,9 @@ static void iudma_reset_channel(struct b
+ 		bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num));
+ 
+ 	/* stop DMA, then wait for the hardware to wrap up */
+-	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx));
++	usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx);
+ 
+-	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) &
++	while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) &
+ 				   ENETDMAC_CHANCFG_EN_MASK) {
+ 		udelay(1);
+ 
+@@ -714,10 +720,10 @@ static void iudma_reset_channel(struct b
+ 			dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n",
+ 				 ch_idx);
+ 			usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK,
+-					ENETDMAC_CHANCFG_REG(ch_idx));
++					ENETDMAC_CHANCFG_REG, ch_idx);
+ 		}
+ 	}
+-	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx));
++	usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx);
+ 
+ 	/* don't leave "live" HW-owned entries for the next guy to step on */
+ 	for (d = iudma->bd_ring; d <= iudma->end_bd; d++)
+@@ -729,11 +735,11 @@ static void iudma_reset_channel(struct b
+ 
+ 	/* set up IRQs, UBUS burst size, and BD base for this channel */
+ 	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
+-			ENETDMAC_IRMASK_REG(ch_idx));
+-	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx));
++			ENETDMAC_IRMASK_REG, ch_idx);
++	usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx);
+ 
+-	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx));
+-	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx));
++	usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx);
++	usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx);
+ }
+ 
+ /**
+@@ -2016,7 +2022,7 @@ static irqreturn_t bcm63xx_udc_data_isr(
+ 	spin_lock(&udc->lock);
+ 
+ 	usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK,
+-			ENETDMAC_IR_REG(iudma->ch_idx));
++			ENETDMAC_IR_REG, iudma->ch_idx);
+ 	bep = iudma->bep;
+ 	rc = iudma_read(udc, iudma);
+ 
+@@ -2156,18 +2162,18 @@ static int bcm63xx_iudma_dbg_show(struct
+ 		seq_printf(s, " [ep%d]:\n",
+ 			   max_t(int, iudma_defaults[ch_idx].ep_num, 0));
+ 		seq_printf(s, "  cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n",
+-			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)),
+-			   usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)),
+-			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)),
+-			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx)));
++			   usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx),
++			   usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx)),
++			   usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx),
++			   usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx);
+ 
+-		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx));
+-		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx));
++		sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx);
++		sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx);
+ 		seq_printf(s, "  base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n",
+-			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)),
++			   usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx),
+ 			   sram2 >> 16, sram2 & 0xffff,
+ 			   sram3 >> 16, sram3 & 0xffff,
+-			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx)));
++			   usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx));
+ 		seq_printf(s, "  desc: %d/%d used", iudma->n_bds_used,
+ 			   iudma->n_bds);
+