brcm63xx: update development kernel to linux 3.14

Now that 3.13 will be EOL soon, switch to 3.14. Known issues: * 74x164 is not available because upstream dropped non-DT support * jffs2 breaks with SMP Unknown issues: * probably plenty Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 40380
author: Jonas Gorski <jogo@openwrt.org> 2014-04-04 10:17:08 +0000
committer: Jonas Gorski <jogo@openwrt.org> 2014-04-04 10:17:08 +0000
commit: b519908e848505ed671c13c45fbd5d29d9472264 (patch)
tree: e498e145bfae89a82aa96cdd3077c4bcb4817cbe /target/linux/brcm63xx/patches-3.14
parent: e098045dc2b233f2a44b9557a12f4645c82c938d (diff)
download: mtk-20170518-b519908e848505ed671c13c45fbd5d29d9472264.zip
mtk-20170518-b519908e848505ed671c13c45fbd5d29d9472264.tar.gz
mtk-20170518-b519908e848505ed671c13c45fbd5d29d9472264.tar.bz2
135 files changed, 14028 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/patches-3.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-3.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
new file mode 100644
index 0000000..63d385b
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
@@ -0,0 +1,28 @@
+From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:19 +0100
+Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
+
+Knowledge of the clock setup delay should remain at the clock level (so
+it can be clock specific and CPU specific). Add the 100 milliseconds
+required clock delay for the USB host clock when it gets enabled.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c |    5 +++++
+ 1 file changed, 5 insertions(+)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -177,6 +177,11 @@ static void usbh_set(struct clk *clk, in
+ 		bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+ 	else if (BCMCPU_IS_6368())
+ 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
++	else
++		return;
++
++	if (enable)
++		msleep(100);
+ }
+ 
+ static struct clk clk_usbh = {
diff --git a/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
new file mode 100644
index 0000000..031dab4
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
@@ -0,0 +1,41 @@
+From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:20 +0100
+Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
+ clock code
+
+This patch adds the required 10 micro seconds delay to the USB device
+clock enable operation. Put this where the correct clock knowledege is,
+which is in the clock code, and remove this delay from the bcm63xx_udc
+gadget driver where it was before.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/clk.c          |    5 +++++
+ drivers/usb/gadget/bcm63xx_udc.c |    1 -
+ 2 files changed, 5 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -199,6 +199,11 @@ static void usbd_set(struct clk *clk, in
+ 		bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
+ 	else if (BCMCPU_IS_6368())
+ 		bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
++	else
++		return;
++
++	if (enable)
++		udelay(10);
+ }
+ 
+ static struct clk clk_usbd = {
+--- a/drivers/usb/gadget/bcm63xx_udc.c
++++ b/drivers/usb/gadget/bcm63xx_udc.c
+@@ -391,7 +391,6 @@ static inline void set_clocks(struct bcm
+ 	if (is_enabled) {
+ 		clk_enable(udc->usbh_clk);
+ 		clk_enable(udc->usbd_clk);
+-		udelay(10);
+ 	} else {
+ 		clk_disable(udc->usbd_clk);
+ 		clk_disable(udc->usbh_clk);
diff --git a/target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
new file mode 100644
index 0000000..f98ae5b
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
@@ -0,0 +1,151 @@
+From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:21 +0100
+Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
+ register
+
+This patch moves the code touching the USB private register in the
+bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
+preparation for adding support for OHCI and EHCI host controllers which
+will also touch the USB private register.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
+ drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
+ 4 files changed, 67 insertions(+), 24 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/usb-common.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,7 +1,7 @@
+ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+ 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+ 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+-		   dev-wdt.o dev-usb-usbd.o
++		   dev-wdt.o dev-usb-usbd.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+ 
+ obj-y		+= boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -0,0 +1,53 @@
++/*
++ * Broadcom BCM63xx common USB device configuration code
++ *
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
++ * Copyright (C) 2012 Broadcom Corporation
++ *
++ */
++#include <linux/export.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++
++void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
++{
++	u32 val;
++
++	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
++	if (is_device) {
++		val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
++		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++	} else {
++		val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
++		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++	}
++	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++
++	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++	if (is_device)
++		val |= USBH_PRIV_SWAP_USBD_MASK;
++	else
++		val &= ~USBH_PRIV_SWAP_USBD_MASK;
++	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++}
++EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
++
++void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
++{
++	u32 val;
++
++	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
++	if (is_on)
++		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++	else
++		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
++	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++}
++EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+@@ -0,0 +1,9 @@
++#ifndef BCM63XX_USB_PRIV_H_
++#define BCM63XX_USB_PRIV_H_
++
++#include <linux/types.h>
++
++void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
++void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
++
++#endif /* BCM63XX_USB_PRIV_H_ */
+--- a/drivers/usb/gadget/bcm63xx_udc.c
++++ b/drivers/usb/gadget/bcm63xx_udc.c
+@@ -40,6 +40,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
++#include <bcm63xx_usb_priv.h>
+ 
+ #define DRV_MODULE_NAME		"bcm63xx_udc"
+ 
+@@ -868,22 +869,7 @@ static void bcm63xx_select_phy_mode(stru
+ 		bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
+ 	}
+ 
+-	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+-	if (is_device) {
+-		val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+-		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-	} else {
+-		val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
+-		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-	}
+-	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+-
+-	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+-	if (is_device)
+-		val |= USBH_PRIV_SWAP_USBD_MASK;
+-	else
+-		val &= ~USBH_PRIV_SWAP_USBD_MASK;
+-	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++	bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
+ }
+ 
+ /**
+@@ -897,14 +883,9 @@ static void bcm63xx_select_phy_mode(stru
+  */
+ static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
+ {
+-	u32 val, portmask = BIT(udc->pd->port_no);
++	u32 portmask = BIT(udc->pd->port_no);
+ 
+-	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+-	if (is_on)
+-		val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-	else
+-		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+-	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++	bcm63xx_usb_priv_select_pullup(portmask, is_on);
+ }
+ 
+ /**
diff --git a/target/linux/brcm63xx/patches-3.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-3.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
new file mode 100644
index 0000000..40bbe08
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
@@ -0,0 +1,169 @@
+From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:22 +0100
+Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
+ common USB code
+
+This patch updates the common USB code touching the USB private
+registers with the specific bits to properly enable OHCI and EHCI
+controllers on BCM63xx SoCs. As a result we now need to protect access
+to Read Modify Write sequences using a spinlock because we cannot
+guarantee that any of the exposed helper will not be called
+concurrently.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
+ 2 files changed, 99 insertions(+)
+
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -5,10 +5,12 @@
+  * License.  See the file "COPYING" in the main directory of this archive
+  * for more details.
+  *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
+  * Copyright (C) 2012 Broadcom Corporation
+  *
+  */
++#include <linux/spinlock.h>
+ #include <linux/export.h>
+ 
+ #include <bcm63xx_cpu.h>
+@@ -16,9 +18,14 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_usb_priv.h>
+ 
++static DEFINE_SPINLOCK(usb_priv_reg_lock);
++
+ void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
+ {
+ 	u32 val;
++	unsigned long flags;
++
++	spin_lock_irqsave(&usb_priv_reg_lock, flags);
+ 
+ 	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+ 	if (is_device) {
+@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
+ 	else
+ 		val &= ~USBH_PRIV_SWAP_USBD_MASK;
+ 	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
++
++	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+ }
+ EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
+ 
+ void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
+ {
+ 	u32 val;
++	unsigned long flags;
++
++	spin_lock_irqsave(&usb_priv_reg_lock, flags);
+ 
+ 	val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
+ 	if (is_on)
+@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
+ 	else
+ 		val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
+ 	bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
++
++	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+ }
+ EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
++
++/* The following array represents the meaning of the DESC/DATA
++ * endian swapping with respect to the CPU configured endianness
++ *
++ * DATA	ENDN	mmio	descriptor
++ * 0	0	BE	invalid
++ * 0	1	BE	LE
++ * 1	0	BE	BE
++ * 1	1	BE	invalid
++ *
++ * Since BCM63XX SoCs are configured to be in big-endian mode
++ * we want configuration at line 3.
++ */
++void bcm63xx_usb_priv_ohci_cfg_set(void)
++{
++	u32 reg;
++	unsigned long flags;
++
++	spin_lock_irqsave(&usb_priv_reg_lock, flags);
++
++	if (BCMCPU_IS_6348())
++		bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
++	else if (BCMCPU_IS_6358()) {
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
++		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
++		/*
++		 * The magic value comes for the original vendor BSP
++		 * and is needed for USB to work. Datasheet does not
++		 * help, so the magic value is used as-is.
++		 */
++		bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
++				USBH_PRIV_TEST_6358_REG);
++
++	} else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++		reg |= USBH_PRIV_SETUP_IOC_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++	}
++
++	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
++}
++
++void bcm63xx_usb_priv_ehci_cfg_set(void)
++{
++	u32 reg;
++	unsigned long flags;
++
++	spin_lock_irqsave(&usb_priv_reg_lock, flags);
++
++	if (BCMCPU_IS_6358()) {
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
++		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
++
++		/*
++		 * The magic value comes for the original vendor BSP
++		 * and is needed for USB to work. Datasheet does not
++		 * help, so the magic value is used as-is.
++		 */
++		bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
++				USBH_PRIV_TEST_6358_REG);
++
++	} else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++		reg |= USBH_PRIV_SETUP_IOC_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++	}
++
++	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+@@ -5,5 +5,7 @@
+ 
+ void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
+ void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
++void bcm63xx_usb_priv_ohci_cfg_set(void);
++void bcm63xx_usb_priv_ehci_cfg_set(void);
+ 
+ #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
new file mode 100644
index 0000000..768dcca
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
@@ -0,0 +1,62 @@
+From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:23 +0100
+Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
+ symbol
+
+This configuration symbol can be used by CPUs supporting the on-chip
+OHCI controller, and ensures that all relevant OHCI-related
+configuration options are correctly selected. So far, OHCI support is
+available for the 6328, 6348, 6358 and 6358 SoCs.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
+ 1 file changed, 10 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -6,10 +6,17 @@ config BCM63XX_CPU_3368
+ 	select SYS_HAS_CPU_BMIPS4350
+ 	select HW_HAS_PCI
+ 
++config BCM63XX_OHCI
++	bool
++	select USB_ARCH_HAS_OHCI
++	select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
++	select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
++
+ config BCM63XX_CPU_6328
+ 	bool "support 6328 CPU"
+ 	select SYS_HAS_CPU_BMIPS4350
+ 	select HW_HAS_PCI
++	select BCM63XX_OHCI
+ 
+ config BCM63XX_CPU_6338
+ 	bool "support 6338 CPU"
+@@ -24,21 +31,25 @@ config BCM63XX_CPU_6348
+ 	bool "support 6348 CPU"
+ 	select SYS_HAS_CPU_BMIPS32_3300
+ 	select HW_HAS_PCI
++	select BCM63XX_OHCI
+ 
+ config BCM63XX_CPU_6358
+ 	bool "support 6358 CPU"
+ 	select SYS_HAS_CPU_BMIPS4350
+ 	select HW_HAS_PCI
++	select BCM63XX_OHCI
+ 
+ config BCM63XX_CPU_6362
+ 	bool "support 6362 CPU"
+ 	select SYS_HAS_CPU_BMIPS4350
+ 	select HW_HAS_PCI
++	select BCM63XX_OHCI
+ 
+ config BCM63XX_CPU_6368
+ 	bool "support 6368 CPU"
+ 	select SYS_HAS_CPU_BMIPS4350
+ 	select HW_HAS_PCI
++	select BCM63XX_OHCI
+ endmenu
+ 
+ source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-3.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-3.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
new file mode 100644
index 0000000..111d481
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
@@ -0,0 +1,138 @@
+From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:24 +0100
+Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
+ controller
+
+Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
+driven by the ohci-platform generic driver by using specific power
+on/off/suspend callback to manage clocks and hardware specific
+configuration.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
+ 3 files changed, 101 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,7 +1,7 @@
+ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+ 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+ 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+-		   dev-wdt.o dev-usb-usbd.o usb-common.o
++		   dev-wdt.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+ 
+ obj-y		+= boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -0,0 +1,94 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ohci_pdriver.h>
++#include <linux/dma-mapping.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++#include <bcm63xx_dev_usb_ohci.h>
++
++static struct resource ohci_resources[] = {
++	{
++		.start		= -1, /* filled at runtime */
++		.end		= -1, /* filled at runtime */
++		.flags		= IORESOURCE_MEM,
++	},
++	{
++		.start		= -1, /* filled at runtime */
++		.flags		= IORESOURCE_IRQ,
++	},
++};
++
++static u64 ohci_dmamask = DMA_BIT_MASK(32);
++
++static struct clk *usb_host_clock;
++
++static int bcm63xx_ohci_power_on(struct platform_device *pdev)
++{
++	usb_host_clock = clk_get(&pdev->dev, "usbh");
++	if (IS_ERR_OR_NULL(usb_host_clock))
++		return -ENODEV;
++
++	clk_prepare_enable(usb_host_clock);
++
++	bcm63xx_usb_priv_ohci_cfg_set();
++
++	return 0;
++}
++
++static void bcm63xx_ohci_power_off(struct platform_device *pdev)
++{
++	if (!IS_ERR_OR_NULL(usb_host_clock)) {
++		clk_disable_unprepare(usb_host_clock);
++		clk_put(usb_host_clock);
++	}
++}
++
++static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
++	.big_endian_desc	= 1,
++	.big_endian_mmio	= 1,
++	.no_big_frame_no	= 1,
++	.num_ports		= 1,
++	.power_on		= bcm63xx_ohci_power_on,
++	.power_off		= bcm63xx_ohci_power_off,
++	.power_suspend		= bcm63xx_ohci_power_off,
++};
++
++static struct platform_device bcm63xx_ohci_device = {
++	.name		= "ohci-platform",
++	.id		= -1,
++	.num_resources	= ARRAY_SIZE(ohci_resources),
++	.resource	= ohci_resources,
++	.dev		= {
++		.platform_data		= &bcm63xx_ohci_pdata,
++		.dma_mask		= &ohci_dmamask,
++		.coherent_dma_mask	= DMA_BIT_MASK(32),
++	},
++};
++
++int __init bcm63xx_ohci_register(void)
++{
++	if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
++		return -ENODEV;
++
++	ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
++	ohci_resources[0].end = ohci_resources[0].start;
++	ohci_resources[0].end += RSET_OHCI_SIZE - 1;
++	ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
++
++	return platform_device_register(&bcm63xx_ohci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_OHCI_H_
++#define BCM63XX_DEV_USB_OHCI_H_
++
++int bcm63xx_ohci_register(void);
++
++#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
new file mode 100644
index 0000000..2c26482
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
@@ -0,0 +1,36 @@
+From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:25 +0100
+Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
+ enables it
+
+BCM63XX-based boards can control the registration of the OHCI controller
+by setting their has_ohci0 flag to 1. Handle this in the generic
+code dealing with board registration and call the actual helper to
+register the OHCI controller.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -26,6 +26,7 @@
+ #include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+ 
+@@ -898,6 +899,9 @@ int __init board_register_devices(void)
+ 	if (board.has_usbd)
+ 		bcm63xx_usbd_register(&board.usbd);
+ 
++	if (board.has_ohci0)
++		bcm63xx_ohci_register();
++
+ 	if (board.has_dsp)
+ 		bcm63xx_dsp_register(&board.dsp);
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
new file mode 100644
index 0000000..bce91e3
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
@@ -0,0 +1,62 @@
+From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:26 +0100
+Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
+ symbol
+
+This configuration symbol can be used by CPUs supporting the on-chip
+EHCI controller, and ensures that all relevant EHCI-related
+configuration options are selected. So far BCM6328, BCM6358 and BCM6368
+have an EHCI controller and do select this symbol. Update
+drivers/usb/host/Kconfig with BCM63XX to update direct unmet
+dependencies.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig |    9 +++++++++
+ drivers/usb/host/Kconfig  |    5 +++--
+ 2 files changed, 12 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -12,11 +12,18 @@ config BCM63XX_OHCI
+ 	select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
+ 	select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
+ 
++config BCM63XX_EHCI
++	bool
++	select USB_ARCH_HAS_EHCI
++	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
++	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
++
+ config BCM63XX_CPU_6328
+ 	bool "support 6328 CPU"
+ 	select SYS_HAS_CPU_BMIPS4350
+ 	select HW_HAS_PCI
+ 	select BCM63XX_OHCI
++	select BCM63XX_EHCI
+ 
+ config BCM63XX_CPU_6338
+ 	bool "support 6338 CPU"
+@@ -38,18 +45,21 @@ config BCM63XX_CPU_6358
+ 	select SYS_HAS_CPU_BMIPS4350
+ 	select HW_HAS_PCI
+ 	select BCM63XX_OHCI
++	select BCM63XX_EHCI
+ 
+ config BCM63XX_CPU_6362
+ 	bool "support 6362 CPU"
+ 	select SYS_HAS_CPU_BMIPS4350
+ 	select HW_HAS_PCI
+ 	select BCM63XX_OHCI
++	select BCM63XX_EHCI
+ 
+ config BCM63XX_CPU_6368
+ 	bool "support 6368 CPU"
+ 	select SYS_HAS_CPU_BMIPS4350
+ 	select HW_HAS_PCI
+ 	select BCM63XX_OHCI
++	select BCM63XX_EHCI
+ endmenu
+ 
+ source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-3.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-3.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
new file mode 100644
index 0000000..8b1f8d2
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
@@ -0,0 +1,137 @@
+From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:27 +0100
+Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
+ controller
+
+Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
+driven by the generic ehci-platform driver by using specific power
+on/off/suspend callbacks to manage clocks and hardware specific
+configuration.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
+ .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
+ 3 files changed, 99 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -1,7 +1,8 @@
+ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
+ 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+ 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+-		   dev-wdt.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
++		   dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
++		   usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+ 
+ obj-y		+= boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -0,0 +1,92 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
++ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/clk.h>
++#include <linux/delay.h>
++#include <linux/usb/ehci_pdriver.h>
++#include <linux/dma-mapping.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_usb_priv.h>
++#include <bcm63xx_dev_usb_ehci.h>
++
++static struct resource ehci_resources[] = {
++	{
++		.start		= -1, /* filled at runtime */
++		.end		= -1, /* filled at runtime */
++		.flags		= IORESOURCE_MEM,
++	},
++	{
++		.start		= -1, /* filled at runtime */
++		.flags		= IORESOURCE_IRQ,
++	},
++};
++
++static u64 ehci_dmamask = DMA_BIT_MASK(32);
++
++static struct clk *usb_host_clock;
++
++static int bcm63xx_ehci_power_on(struct platform_device *pdev)
++{
++	usb_host_clock = clk_get(&pdev->dev, "usbh");
++	if (IS_ERR_OR_NULL(usb_host_clock))
++		return -ENODEV;
++
++	clk_prepare_enable(usb_host_clock);
++
++	bcm63xx_usb_priv_ehci_cfg_set();
++
++	return 0;
++}
++
++static void bcm63xx_ehci_power_off(struct platform_device *pdev)
++{
++	if (!IS_ERR_OR_NULL(usb_host_clock)) {
++		clk_disable_unprepare(usb_host_clock);
++		clk_put(usb_host_clock);
++	}
++}
++
++static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
++	.big_endian_desc	= 1,
++	.big_endian_mmio	= 1,
++	.power_on		= bcm63xx_ehci_power_on,
++	.power_off		= bcm63xx_ehci_power_off,
++	.power_suspend		= bcm63xx_ehci_power_off,
++};
++
++static struct platform_device bcm63xx_ehci_device = {
++	.name		= "ehci-platform",
++	.id		= -1,
++	.num_resources	= ARRAY_SIZE(ehci_resources),
++	.resource	= ehci_resources,
++	.dev		= {
++		.platform_data		= &bcm63xx_ehci_pdata,
++		.dma_mask		= &ehci_dmamask,
++		.coherent_dma_mask	= DMA_BIT_MASK(32),
++	},
++};
++
++int __init bcm63xx_ehci_register(void)
++{
++	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++		return 0;
++
++	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
++	ehci_resources[0].end = ehci_resources[0].start;
++	ehci_resources[0].end += RSET_EHCI_SIZE - 1;
++	ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
++
++	return platform_device_register(&bcm63xx_ehci_device);
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -0,0 +1,6 @@
++#ifndef BCM63XX_DEV_USB_EHCI_H_
++#define BCM63XX_DEV_USB_EHCI_H_
++
++int bcm63xx_ehci_register(void);
++
++#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
new file mode 100644
index 0000000..641a57c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
@@ -0,0 +1,36 @@
+From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:28 +0100
+Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
+ enables it
+
+BCM63XX-based board can control the registration of the EHCI controller
+by setting their has_ehci0 flag to 1. Handle this in the generic
+code dealing with board registration and call the actual helper to register
+the EHCI controller.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -26,6 +26,7 @@
+ #include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_dev_pcmcia.h>
+ #include <bcm63xx_dev_spi.h>
++#include <bcm63xx_dev_usb_ehci.h>
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+@@ -899,6 +900,9 @@ int __init board_register_devices(void)
+ 	if (board.has_usbd)
+ 		bcm63xx_usbd_register(&board.usbd);
+ 
++	if (board.has_ehci0)
++		bcm63xx_ehci_register();
++
+ 	if (board.has_ohci0)
+ 		bcm63xx_ohci_register();
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-3.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
new file mode 100644
index 0000000..6d91129
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
@@ -0,0 +1,24 @@
+From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <florian@openwrt.org>
+Date: Mon, 28 Jan 2013 20:06:30 +0100
+Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
+ overcurrent
+
+This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
+does not support proper overcurrent reporting.
+
+Signed-off-by: Florian Fainelli <florian@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
+ static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
+ 	.big_endian_desc	= 1,
+ 	.big_endian_mmio	= 1,
++	.ignore_oc		= 1,
+ 	.power_on		= bcm63xx_ehci_power_on,
+ 	.power_off		= bcm63xx_ehci_power_off,
+ 	.power_suspend		= bcm63xx_ehci_power_off,
diff --git a/target/linux/brcm63xx/patches-3.14/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch b/target/linux/brcm63xx/patches-3.14/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
new file mode 100644
index 0000000..00dc9c9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
@@ -0,0 +1,38 @@
+From 3f650fc30aa0badf9d02842ce396cea3eef2eeaa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 1 Jul 2011 23:16:47 +0200
+Subject: [PATCH 49/79] SPI: Allow specifying the parsers for SPI flash
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ include/linux/spi/flash.h |    5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -2,7 +2,7 @@
+ #define LINUX_SPI_FLASH_H
+ 
+ struct mtd_partition;
+-
++struct mtd_part_parser_data;
+ /**
+  * struct flash_platform_data: board-specific flash data
+  * @name: optional flash device name (eg, as used with mtdparts=)
+@@ -10,6 +10,8 @@ struct mtd_partition;
+  * @nr_parts: number of mtd_partitions for static partitoning
+  * @type: optional flash device type (e.g. m25p80 vs m25p64), for use
+  *	with chips that can't be queried for JEDEC or other IDs
++ * @part_probe_types: optional list of MTD parser names to use for
++ *	partitioning
+  *
+  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
+  * provide information about SPI flash parts (such as DataFlash) to
+@@ -25,6 +27,7 @@ struct flash_platform_data {
+ 
+ 	char		*type;
+ 
++	const char	**part_probe_types;
+ 	/* we'll likely add more ... use JEDEC IDs, etc */
+ };
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch b/target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
new file mode 100644
index 0000000..ad82320
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
@@ -0,0 +1,23 @@
+From c7c3c338cb25d7f55ddb3f6bfbf3572758ca3896 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 10 Nov 2011 16:53:08 +0100
+Subject: [PATCH 50/79] MTD: DEVICES: m25p80: use parsers if provided in flash
+ platform data
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/mtd/devices/m25p80.c |    3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -1313,7 +1313,8 @@ static int m25p_probe(struct spi_device
+ 	/* partitions should match sector boundaries; and it may be good to
+ 	 * use readonly partitions for writeprotected sectors (BP2..BP0).
+ 	 */
+-	return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
++	return mtd_device_parse_register(&flash->mtd,
++			data ? data->part_probe_types : NULL, &ppdata,
+ 			data ? data->parts : NULL,
+ 			data ? data->nr_parts : 0);
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch b/target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
new file mode 100644
index 0000000..4e8a7a3
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
@@ -0,0 +1,92 @@
+From 5fb4e8d7287ac8fcb33aae8b1e9e22c5a3c392bd Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 10 Nov 2011 17:33:40 +0100
+Subject: [PATCH 51/79] MTD: DEVICES: m25p80: add support for limiting reads
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/mtd/devices/m25p80.c |   29 +++++++++++++++++++++++++++--
+ include/linux/spi/flash.h    |    4 ++++
+ 2 files changed, 31 insertions(+), 2 deletions(-)
+
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -115,6 +115,7 @@ struct m25p {
+ 	u8			program_opcode;
+ 	u8			*command;
+ 	enum read_type		flash_read;
++	int			max_transfer_len;
+ };
+ 
+ static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
+@@ -509,10 +510,9 @@ static inline unsigned int m25p80_rx_nbi
+  * Read an address range from the flash chip.  The address range
+  * may be any size provided it is within the physical boundaries.
+  */
+-static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
++static int __m25p80_read(struct m25p *flash, loff_t from, size_t len,
+ 	size_t *retlen, u_char *buf)
+ {
+-	struct m25p *flash = mtd_to_m25p(mtd);
+ 	struct spi_transfer t[2];
+ 	struct spi_message m;
+ 	uint8_t opcode;
+@@ -562,6 +562,28 @@ static int m25p80_read(struct mtd_info *
+ 	return 0;
+ }
+ 
++static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
++	size_t *retlen, u_char *buf)
++{
++	struct m25p *flash = mtd_to_m25p(mtd);
++	size_t off;
++	size_t read_len = flash->max_transfer_len;
++	size_t part_len;
++	int ret = 0;
++
++	if (!read_len)
++		return __m25p80_read(flash, from, len, retlen, buf);
++
++	*retlen = 0;
++
++	for (off = 0; off < len && !ret; off += read_len) {
++		ret = __m25p80_read(flash, from + off, min(len - off, read_len),
++				    &part_len, buf + off);
++			*retlen += part_len;
++	}
++
++	return ret;
++}
+ /*
+  * Write an address range to the flash chip.  Data must be written in
+  * FLASH_PAGESIZE chunks.  The address range may be any size provided
+@@ -1158,6 +1180,9 @@ static int m25p_probe(struct spi_device
+ 	if (!flash->command)
+ 		return -ENOMEM;
+ 
++	if (data)
++		flash->max_transfer_len = data->max_transfer_len;
++
+ 	flash->spi = spi;
+ 	mutex_init(&flash->lock);
+ 	spi_set_drvdata(spi, flash);
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -13,6 +13,8 @@ struct mtd_part_parser_data;
+  * @part_probe_types: optional list of MTD parser names to use for
+  *	partitioning
+  *
++ * @max_transfer_len: option maximum read/write length limitation for
++ *	SPI controllers not able to transfer any length commands.
+  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
+  * provide information about SPI flash parts (such as DataFlash) to
+  * help set up the device and its appropriate default partitioning.
+@@ -28,6 +30,8 @@ struct flash_platform_data {
+ 	char		*type;
+ 
+ 	const char	**part_probe_types;
++
++	unsigned int	max_transfer_len;
+ 	/* we'll likely add more ... use JEDEC IDs, etc */
+ };
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch b/target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch
new file mode 100644
index 0000000..3ca0c8e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/204-USB-OHCI-allow-other-arches-to-use-the-BE-frame-numb.patch
@@ -0,0 +1,31 @@
+From b2f399dcd674a692a64bb3b300b77b78ae57b530 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 12 Jan 2014 16:47:35 +0100
+Subject: [PATCH] USB: OHCI: allow other arches to use the BE frame number
+ quirk
+
+Intead of guarding it with a certain PPC SoC and expanding the list
+for each SoC requiring it, just guard it with USB_OHCI_BIG_ENDIAN_DESC.
+
+This makes it less suprising that passing no_big_frame_no = 1 for the
+platform data does not do what expected (or
+
+Checking it for all big endian descriptor setups should not impact
+performance much as USB1.1 is rather slow anyway.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/usb/host/ohci.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/usb/host/ohci.h
++++ b/drivers/usb/host/ohci.h
+@@ -639,7 +639,7 @@ static inline u32 hc32_to_cpup (const st
+  * some big-endian SOC implementations.  Same thing happens with PSW access.
+  */
+ 
+-#ifdef CONFIG_PPC_MPC52xx
++#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
+ #define big_endian_frame_no_quirk(ohci)	(ohci->flags & OHCI_QUIRK_FRAME_NO)
+ #else
+ #define big_endian_frame_no_quirk(ohci)	0
diff --git a/target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch b/target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
new file mode 100644
index 0000000..474171f
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/206-USB-EHCI-allow-limiting-ports-for-ehci-platform.patch
@@ -0,0 +1,65 @@
+From 6ac09efa8f0e189ffe7dd7b0889289de56ee44cc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 19 Jan 2014 12:18:03 +0100
+Subject: [PATCH] USB: EHCI: allow limiting ports for ehci-platform
+
+In the same way as the ohci platform driver allows limiting ports,
+enable the same for ehci. This prevents a mismatch in the available
+ports between ehci/ohci on USB 2.0 controllers.
+
+This is needed if the USB host controller always reports the maximum
+number of ports regardless of the number of available ports (because
+one might be set to be usb device).
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/usb/host/ehci-hcd.c      | 4 ++++
+ drivers/usb/host/ehci-platform.c | 2 ++
+ drivers/usb/host/ehci.h          | 1 +
+ include/linux/usb/ehci_pdriver.h | 1 +
+ 4 files changed, 8 insertions(+)
+
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -660,6 +660,10 @@ int ehci_setup(struct usb_hcd *hcd)
+ 
+ 	/* cache this readonly data; minimize chip reads */
+ 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
++	if (ehci->num_ports) {
++		ehci->hcs_params &= ~0xf; /* bits 3:0, ports on HC */
++		ehci->hcs_params |= ehci->num_ports;
++	}
+ 
+ 	ehci->sbrn = HCD_USB2;
+ 
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -48,6 +48,8 @@ static int ehci_platform_reset(struct us
+ 	ehci->big_endian_desc = pdata->big_endian_desc;
+ 	ehci->big_endian_mmio = pdata->big_endian_mmio;
+ 	ehci->ignore_oc = pdata->ignore_oc;
++	if (pdata->num_ports && pdata->num_ports <= 15)
++		ehci->num_ports = pdata->num_ports;
+ 
+ 	if (pdata->pre_setup) {
+ 		retval = pdata->pre_setup(hcd);
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -213,6 +213,7 @@ struct ehci_hcd {			/* one per controlle
+ 	u32			command;
+ 
+ 	/* SILICON QUIRKS */
++	unsigned int		num_ports;
+ 	unsigned		no_selective_suspend:1;
+ 	unsigned		has_fsl_port_bug:1; /* FreeScale */
+ 	unsigned		big_endian_mmio:1;
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -40,6 +40,7 @@ struct usb_hcd;
+  */
+ struct usb_ehci_pdata {
+ 	int		caps_offset;
++	unsigned int	num_ports;
+ 	unsigned	has_tt:1;
+ 	unsigned	has_synopsys_hc_bug:1;
+ 	unsigned	big_endian_desc:1;
diff --git a/target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch b/target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch
new file mode 100644
index 0000000..0886f6c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/300-reset_buttons.patch
@@ -0,0 +1,116 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -12,6 +12,8 @@
+ #include <linux/string.h>
+ #include <linux/platform_device.h>
+ #include <linux/ssb/ssb.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -37,6 +39,9 @@
+ 
+ #define HCS_OFFSET_128K			0x20000
+ 
++#define BCM963XX_KEYS_POLL_INTERVAL	20
++#define BCM963XX_KEYS_DEBOUNCE_INTERVAL	(BCM963XX_KEYS_POLL_INTERVAL * 3)
++
+ static struct board_info board;
+ 
+ /*
+@@ -380,6 +385,16 @@ static struct board_info __initdata boar
+ 			.active_low	= 1,
+ 		},
+ 	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 33,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
+ };
+ 
+ static struct board_info __initdata board_96348gw = {
+@@ -438,6 +453,16 @@ static struct board_info __initdata boar
+ 			.active_low	= 1,
+ 		},
+ 	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 36,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
+ };
+ 
+ static struct board_info __initdata board_FAST2404 = {
+@@ -871,11 +896,23 @@ static struct platform_device bcm63xx_gp
+ 	.dev.platform_data	= &bcm63xx_led_data,
+ };
+ 
++static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
++	.poll_interval  = BCM963XX_KEYS_POLL_INTERVAL,
++};
++
++static struct platform_device bcm63xx_gpio_keys_device = {
++	.name		= "gpio-keys-polled",
++	.id		= 0,
++	.dev.platform_data = &bcm63xx_gpio_keys_data,
++};
++
+ /*
+  * third stage init callback, register all board devices.
+  */
+ int __init board_register_devices(void)
+ {
++	int button_count = 0;
++
+ 	if (board.has_uart0)
+ 		bcm63xx_uart_register(0);
+ 
+@@ -937,5 +974,16 @@ int __init board_register_devices(void)
+ 		gpio_request_one(board.ephy_reset_gpio,
+ 				board.ephy_reset_gpio_flags, "ephy-reset");
+ 
++	/* count number of BUTTONs defined by this device */
++	while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
++		button_count++;
++
++	if (button_count) {
++		bcm63xx_gpio_keys_data.nbuttons = button_count;
++		bcm63xx_gpio_keys_data.buttons = board.buttons;
++
++		platform_device_register(&bcm63xx_gpio_keys_device);
++	}
++
+ 	return 0;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -3,6 +3,7 @@
+ 
+ #include <linux/types.h>
+ #include <linux/gpio.h>
++#include <linux/gpio_keys.h>
+ #include <linux/leds.h>
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+@@ -48,6 +49,9 @@ struct board_info {
+ 	/* GPIO LEDs */
+ 	struct gpio_led leds[5];
+ 
++	/* Buttons */
++	struct gpio_keys_button buttons[4];
++
+ 	/* External PHY reset GPIO */
+ 	unsigned int ephy_reset_gpio;
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/301-led_count.patch b/target/linux/brcm63xx/patches-3.14/301-led_count.patch
new file mode 100644
index 0000000..5b9a12e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/301-led_count.patch
@@ -0,0 +1,41 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -912,6 +912,7 @@ static struct platform_device bcm63xx_gp
+ int __init board_register_devices(void)
+ {
+ 	int button_count = 0;
++	int led_count = 0;
+ 
+ 	if (board.has_uart0)
+ 		bcm63xx_uart_register(0);
+@@ -965,10 +966,16 @@ int __init board_register_devices(void)
+ 
+ 	bcm63xx_flash_register();
+ 
+-	bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
+-	bcm63xx_led_data.leds = board.leds;
++	/* count number of LEDs defined by this device */
++	while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
++		led_count++;
++
++	if (led_count) {
++		bcm63xx_led_data.num_leds = led_count;
++		bcm63xx_led_data.leds = board.leds;
+ 
+-	platform_device_register(&bcm63xx_gpio_leds);
++		platform_device_register(&bcm63xx_gpio_leds);
++	}
+ 
+ 	if (board.ephy_reset_gpio && board.ephy_reset_gpio_flags)
+ 		gpio_request_one(board.ephy_reset_gpio,
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -47,7 +47,7 @@ struct board_info {
+ 	struct bcm63xx_dsp_platform_data dsp;
+ 
+ 	/* GPIO LEDs */
+-	struct gpio_led leds[5];
++	struct gpio_led leds[14];
+ 
+ 	/* Buttons */
+ 	struct gpio_keys_button buttons[4];
diff --git a/target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch b/target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch
new file mode 100644
index 0000000..2810b6f
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/302-extended-platform-devices.patch
@@ -0,0 +1,25 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -964,6 +964,9 @@ int __init board_register_devices(void)
+ 
+ 	bcm63xx_hsspi_register();
+ 
++	if (board.num_devs)
++		platform_add_devices(board.devs, board.num_devs);
++
+ 	bcm63xx_flash_register();
+ 
+ 	/* count number of LEDs defined by this device */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -57,6 +57,10 @@ struct board_info {
+ 
+ 	/* External PHY reset GPIO flags from gpio.h */
+ 	unsigned long ephy_reset_gpio_flags;
++
++	/* Additional platform devices */
++	struct platform_device **devs;
++	unsigned int	num_devs;
+ };
+ 
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch b/target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch
new file mode 100644
index 0000000..0258710
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/303-spi-board-info.patch
@@ -0,0 +1,33 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -14,6 +14,7 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
++#include <linux/spi/spi.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -967,6 +968,9 @@ int __init board_register_devices(void)
+ 	if (board.num_devs)
+ 		platform_add_devices(board.devs, board.num_devs);
+ 
++	if (board.num_spis)
++		spi_register_board_info(board.spis, board.num_spis);
++
+ 	bcm63xx_flash_register();
+ 
+ 	/* count number of LEDs defined by this device */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -61,6 +61,10 @@ struct board_info {
+ 	/* Additional platform devices */
+ 	struct platform_device **devs;
+ 	unsigned int	num_devs;
++
++	/* Additional platform devices */
++	struct spi_board_info *spis;
++	unsigned int	num_spis;
+ };
+ 
+ #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/304-boardid_fixup.patch b/target/linux/brcm63xx/patches-3.14/304-boardid_fixup.patch
new file mode 100644
index 0000000..937b9d6
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/304-boardid_fixup.patch
@@ -0,0 +1,62 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -35,6 +35,7 @@
+ #include <board_bcm963xx.h>
+ 
+ #include <uapi/linux/bcm933xx_hcs.h>
++#include <uapi/linux/bcm963xx_tag.h>
+ 
+ #define PFX	"board_bcm963xx: "
+ 
+@@ -43,6 +44,9 @@
+ #define BCM963XX_KEYS_POLL_INTERVAL	20
+ #define BCM963XX_KEYS_DEBOUNCE_INTERVAL	(BCM963XX_KEYS_POLL_INTERVAL * 3)
+ 
++#define CFE_OFFSET_64K			0x10000
++#define CFE_OFFSET_128K			0x20000
++
+ static struct board_info board;
+ 
+ /*
+@@ -782,6 +786,30 @@ const char *board_get_name(void)
+ 	return board.name;
+ }
+ 
++static void __init boardid_fixup(u8 *boot_addr)
++{
++	struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
++	char *board_name = (char *)bcm63xx_nvram_get_name();
++
++	/* check if bcm_tag is at 64k offset */
++	if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
++		/* else try 128k */
++		tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K);
++		if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
++			/* No tag found */
++			printk(KERN_DEBUG "No bcm_tag found!\n");
++			return;
++		}
++	}
++	/* check if we should override the boardid */
++	if (tag->information1[0] != '+')
++		return;
++
++	strncpy(board_name, &tag->information1[1], BOARDID_LEN);
++
++	printk(KERN_INFO "Overriding boardid with '%s'\n", board_name);
++}
++
+ /*
+  * early init callback, read nvram data from flash and checksum it
+  */
+@@ -820,6 +848,10 @@ void __init board_prom_init(void)
+ 		hcs = (struct bcm_hcs *)boot_addr;
+ 		board_name = hcs->filename;
+ 	} else {
++		if (strcmp(cfe_version, "unknown") != 0) {
++			/* cfe present */
++			boardid_fixup(boot_addr);
++		}
+ 		board_name = bcm63xx_nvram_get_name();
+ 	}
+ 	/* find board by name */
diff --git a/target/linux/brcm63xx/patches-3.14/308-board_leds_naming.patch b/target/linux/brcm63xx/patches-3.14/308-board_leds_naming.patch
new file mode 100644
index 0000000..0064066
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/308-board_leds_naming.patch
@@ -0,0 +1,267 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -148,28 +148,28 @@ static struct board_info __initdata boar
+ 
+ 	.leds = {
+ 		{
+-			.name		= "adsl",
++			.name		= "96338GW:green:adsl",
+ 			.gpio		= 3,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ses",
++			.name		= "96338GW:green:ses",
+ 			.gpio		= 5,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp-fail",
++			.name		= "96338GW:green:ppp-fail",
+ 			.gpio		= 4,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "power",
++			.name		= "96338GW:green:power",
+ 			.gpio		= 0,
+ 			.active_low	= 1,
+ 			.default_trigger = "default-on",
+ 		},
+ 		{
+-			.name		= "stop",
++			.name		= "96338GW:green:stop",
+ 			.gpio		= 1,
+ 			.active_low	= 1,
+ 		}
+@@ -189,28 +189,28 @@ static struct board_info __initdata boar
+ 
+ 	.leds = {
+ 		{
+-			.name		= "adsl",
++			.name		= "96338W:green:adsl",
+ 			.gpio		= 3,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ses",
++			.name		= "96338W:green:ses",
+ 			.gpio		= 5,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp-fail",
++			.name		= "96338W:green:ppp-fail",
+ 			.gpio		= 4,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "power",
++			.name		= "96338W:green:power",
+ 			.gpio		= 0,
+ 			.active_low	= 1,
+ 			.default_trigger = "default-on",
+ 		},
+ 		{
+-			.name		= "stop",
++			.name		= "96338W:green:stop",
+ 			.gpio		= 1,
+ 			.active_low	= 1,
+ 		},
+@@ -249,29 +249,29 @@ static struct board_info __initdata boar
+ 
+ 	.leds = {
+ 		{
+-			.name		= "adsl-fail",
++			.name		= "96348R:green:adsl-fail",
+ 			.gpio		= 2,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp",
++			.name		= "96348R:green:ppp",
+ 			.gpio		= 3,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp-fail",
++			.name		= "96348R:green:ppp-fail",
+ 			.gpio		= 4,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "power",
++			.name		= "96348R:green:power",
+ 			.gpio		= 0,
+ 			.active_low	= 1,
+ 			.default_trigger = "default-on",
+ 
+ 		},
+ 		{
+-			.name		= "stop",
++			.name		= "96348R:green:stop",
+ 			.gpio		= 1,
+ 			.active_low	= 1,
+ 		},
+@@ -310,28 +310,28 @@ static struct board_info __initdata boar
+ 
+ 	.leds = {
+ 		{
+-			.name		= "adsl-fail",
++			.name		= "96348GW-10:green:adsl-fail",
+ 			.gpio		= 2,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp",
++			.name		= "96348GW-10:green:ppp",
+ 			.gpio		= 3,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp-fail",
++			.name		= "96348GW-10:green:ppp-fail",
+ 			.gpio		= 4,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "power",
++			.name		= "96348GW-10:green:power",
+ 			.gpio		= 0,
+ 			.active_low	= 1,
+ 			.default_trigger = "default-on",
+ 		},
+ 		{
+-			.name		= "stop",
++			.name		= "96348GW-10:green:stop",
+ 			.gpio		= 1,
+ 			.active_low	= 1,
+ 		},
+@@ -364,28 +364,28 @@ static struct board_info __initdata boar
+ 
+ 	.leds = {
+ 		{
+-			.name		= "adsl-fail",
++			.name		= "96348GW-11:green:adsl-fail",
+ 			.gpio		= 2,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp",
++			.name		= "96348GW-11:green:ppp",
+ 			.gpio		= 3,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp-fail",
++			.name		= "96348GW-11:green:ppp-fail",
+ 			.gpio		= 4,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "power",
++			.name		= "96348GW-11:green:power",
+ 			.gpio		= 0,
+ 			.active_low	= 1,
+ 			.default_trigger = "default-on",
+ 		},
+ 		{
+-			.name		= "stop",
++			.name		= "96348GW-11:green:stop",
+ 			.gpio		= 1,
+ 			.active_low	= 1,
+ 		},
+@@ -432,28 +432,28 @@ static struct board_info __initdata boar
+ 
+ 	.leds = {
+ 		{
+-			.name		= "adsl-fail",
++			.name		= "96348GW:green:adsl-fail",
+ 			.gpio		= 2,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp",
++			.name		= "96348GW:green:ppp",
+ 			.gpio		= 3,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp-fail",
++			.name		= "96348GW:green:ppp-fail",
+ 			.gpio		= 4,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "power",
++			.name		= "96348GW:green:power",
+ 			.gpio		= 0,
+ 			.active_low	= 1,
+ 			.default_trigger = "default-on",
+ 		},
+ 		{
+-			.name		= "stop",
++			.name		= "96348GW:green:stop",
+ 			.gpio		= 1,
+ 			.active_low	= 1,
+ 		},
+@@ -585,27 +585,27 @@ static struct board_info __initdata boar
+ 
+ 	.leds = {
+ 		{
+-			.name		= "adsl-fail",
++			.name		= "96358VW:green:adsl-fail",
+ 			.gpio		= 15,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp",
++			.name		= "96358VW:green:ppp",
+ 			.gpio		= 22,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp-fail",
++			.name		= "96358VW:green:ppp-fail",
+ 			.gpio		= 23,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "power",
++			.name		= "96358VW:green:power",
+ 			.gpio		= 4,
+ 			.default_trigger = "default-on",
+ 		},
+ 		{
+-			.name		= "stop",
++			.name		= "96358VW:green:stop",
+ 			.gpio		= 5,
+ 		},
+ 	},
+@@ -637,22 +637,22 @@ static struct board_info __initdata boar
+ 
+ 	.leds = {
+ 		{
+-			.name		= "adsl",
++			.name		= "96358VW2:green:adsl",
+ 			.gpio		= 22,
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "ppp-fail",
++			.name		= "96358VW2:green:ppp-fail",
+ 			.gpio		= 23,
+ 		},
+ 		{
+-			.name		= "power",
++			.name		= "96358VW2:green:power",
+ 			.gpio		= 5,
+ 			.active_low	= 1,
+ 			.default_trigger = "default-on",
+ 		},
+ 		{
+-			.name		= "stop",
++			.name		= "96358VW2:green:stop",
+ 			.gpio		= 4,
+ 			.active_low	= 1,
+ 		},
diff --git a/target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch b/target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch
new file mode 100644
index 0000000..dfc3384
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/309-cfe_version_mod.patch
@@ -0,0 +1,27 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -835,10 +835,20 @@ void __init board_prom_init(void)
+ 
+ 	/* dump cfe version */
+ 	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+-	if (!memcmp(cfe, "cfe-v", 5))
+-		snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
+-			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
+-	else
++	if (strstarts(cfe, "cfe-")) {
++		if(cfe[4] == 'v') {
++			if(cfe[5] == 'd')
++				snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
++			else if (cfe[10] > 0)
++				snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
++					 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
++			else
++				snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
++					 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
++		} else {
++			snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
++		}
++	} else
+ 		strcpy(cfe_version, "unknown");
+ 	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/310-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch b/target/linux/brcm63xx/patches-3.14/310-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch
new file mode 100644
index 0000000..04b3426
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/310-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-registe.patch
@@ -0,0 +1,61 @@
+From 082a49f0490008b999db80e3ccf1521c7dd21cec Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 2 Dec 2013 12:32:44 +0100
+Subject: [PATCH 1/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code from register
+ sets
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 33 ------------------------
+ 1 file changed, 33 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -598,10 +598,6 @@ enum bcm63xx_regs_set {
+ 
+ extern const unsigned long *bcm63xx_regs_base;
+ 
+-#define __GEN_RSET_BASE(__cpu, __rset)					\
+-	case RSET_## __rset :						\
+-		return BCM_## __cpu ##_## __rset ##_BASE;
+-
+ #define __GEN_RSET(__cpu)						\
+ 	switch (set) {							\
+ 	__GEN_RSET_BASE(__cpu, DSL_LMEM)				\
+@@ -693,36 +689,7 @@ extern const unsigned long *bcm63xx_regs
+ 
+ static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
+ {
+-#ifdef BCMCPU_RUNTIME_DETECT
+ 	return bcm63xx_regs_base[set];
+-#else
+-#ifdef CONFIG_BCM63XX_CPU_3368
+-	__GEN_RSET(3368)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6328
+-	__GEN_RSET(6328)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6338
+-	__GEN_RSET(6338)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6345
+-	__GEN_RSET(6345)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6348
+-	__GEN_RSET(6348)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6358
+-	__GEN_RSET(6358)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6362
+-	__GEN_RSET(6362)
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6368
+-	__GEN_RSET(6368)
+-#endif
+-#endif
+-	/* unreached */
+-	return 0;
+ }
+ 
+ /*
diff --git a/target/linux/brcm63xx/patches-3.14/311-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch b/target/linux/brcm63xx/patches-3.14/311-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch
new file mode 100644
index 0000000..9226530
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/311-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-irq-setup-co.patch
@@ -0,0 +1,135 @@
+From 07d0224576cbb2e6ac680b4ade4bba7a49bd0a07 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 2 Dec 2013 12:34:11 +0100
+Subject: [PATCH 2/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from irq setup code
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 109 ------------------------------------------------
+ 1 file changed, 109 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -26,114 +26,6 @@ static void __internal_irq_mask_64(unsig
+ static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
+ static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
+ 
+-#ifndef BCMCPU_RUNTIME_DETECT
+-#ifdef CONFIG_BCM63XX_CPU_3368
+-#define irq_stat_reg		PERF_IRQSTAT_3368_REG
+-#define irq_mask_reg		PERF_IRQMASK_3368_REG
+-#define irq_bits		32
+-#define is_ext_irq_cascaded	0
+-#define ext_irq_start		0
+-#define ext_irq_end		0
+-#define ext_irq_count		4
+-#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_3368
+-#define ext_irq_cfg_reg2	0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6328
+-#define irq_stat_reg		PERF_IRQSTAT_6328_REG
+-#define irq_mask_reg		PERF_IRQMASK_6328_REG
+-#define irq_bits		64
+-#define is_ext_irq_cascaded	1
+-#define ext_irq_start		(BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+-#define ext_irq_end		(BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE)
+-#define ext_irq_count		4
+-#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6328
+-#define ext_irq_cfg_reg2	0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6338
+-#define irq_stat_reg		PERF_IRQSTAT_6338_REG
+-#define irq_mask_reg		PERF_IRQMASK_6338_REG
+-#define irq_bits		32
+-#define is_ext_irq_cascaded	0
+-#define ext_irq_start		0
+-#define ext_irq_end		0
+-#define ext_irq_count		4
+-#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6338
+-#define ext_irq_cfg_reg2	0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6345
+-#define irq_stat_reg		PERF_IRQSTAT_6345_REG
+-#define irq_mask_reg		PERF_IRQMASK_6345_REG
+-#define irq_bits		32
+-#define is_ext_irq_cascaded	0
+-#define ext_irq_start		0
+-#define ext_irq_end		0
+-#define ext_irq_count		4
+-#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6345
+-#define ext_irq_cfg_reg2	0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6348
+-#define irq_stat_reg		PERF_IRQSTAT_6348_REG
+-#define irq_mask_reg		PERF_IRQMASK_6348_REG
+-#define irq_bits		32
+-#define is_ext_irq_cascaded	0
+-#define ext_irq_start		0
+-#define ext_irq_end		0
+-#define ext_irq_count		4
+-#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6348
+-#define ext_irq_cfg_reg2	0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6358
+-#define irq_stat_reg		PERF_IRQSTAT_6358_REG
+-#define irq_mask_reg		PERF_IRQMASK_6358_REG
+-#define irq_bits		32
+-#define is_ext_irq_cascaded	1
+-#define ext_irq_start		(BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+-#define ext_irq_end		(BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE)
+-#define ext_irq_count		4
+-#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6358
+-#define ext_irq_cfg_reg2	0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6362
+-#define irq_stat_reg		PERF_IRQSTAT_6362_REG
+-#define irq_mask_reg		PERF_IRQMASK_6362_REG
+-#define irq_bits		64
+-#define is_ext_irq_cascaded	1
+-#define ext_irq_start		(BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+-#define ext_irq_end		(BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE)
+-#define ext_irq_count		4
+-#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6362
+-#define ext_irq_cfg_reg2	0
+-#endif
+-#ifdef CONFIG_BCM63XX_CPU_6368
+-#define irq_stat_reg		PERF_IRQSTAT_6368_REG
+-#define irq_mask_reg		PERF_IRQMASK_6368_REG
+-#define irq_bits		64
+-#define is_ext_irq_cascaded	1
+-#define ext_irq_start		(BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE)
+-#define ext_irq_end		(BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE)
+-#define ext_irq_count		6
+-#define ext_irq_cfg_reg1	PERF_EXTIRQ_CFG_REG_6368
+-#define ext_irq_cfg_reg2	PERF_EXTIRQ_CFG_REG2_6368
+-#endif
+-
+-#if irq_bits == 32
+-#define dispatch_internal			__dispatch_internal
+-#define internal_irq_mask			__internal_irq_mask_32
+-#define internal_irq_unmask			__internal_irq_unmask_32
+-#else
+-#define dispatch_internal			__dispatch_internal_64
+-#define internal_irq_mask			__internal_irq_mask_64
+-#define internal_irq_unmask			__internal_irq_unmask_64
+-#endif
+-
+-#define irq_stat_addr	(bcm63xx_regset_address(RSET_PERF) + irq_stat_reg)
+-#define irq_mask_addr	(bcm63xx_regset_address(RSET_PERF) + irq_mask_reg)
+-
+-static inline void bcm63xx_init_irq(void)
+-{
+-}
+-#else /* ! BCMCPU_RUNTIME_DETECT */
+-
+ static u32 irq_stat_addr, irq_mask_addr;
+ static void (*dispatch_internal)(void);
+ static int is_ext_irq_cascaded;
+@@ -234,7 +126,6 @@ static void bcm63xx_init_irq(void)
+ 		internal_irq_unmask = __internal_irq_unmask_64;
+ 	}
+ }
+-#endif /* ! BCMCPU_RUNTIME_DETECT */
+ 
+ static inline u32 get_ext_irq_perf_reg(int irq)
+ {
diff --git a/target/linux/brcm63xx/patches-3.14/312-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch b/target/linux/brcm63xx/patches-3.14/312-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch
new file mode 100644
index 0000000..f26624e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/312-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-reset-code.patch
@@ -0,0 +1,85 @@
+From 72578a46543821c5b9544842e45fcbed0c1b7eb8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 3 Dec 2013 13:35:12 +0100
+Subject: [PATCH 3/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from reset code
+
+---
+ arch/mips/bcm63xx/reset.c | 60 -----------------------------------------------
+ 1 file changed, 60 deletions(-)
+
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -125,8 +125,6 @@
+ #define BCM6368_RESET_PCIE	0
+ #define BCM6368_RESET_PCIE_EXT	0
+ 
+-#ifdef BCMCPU_RUNTIME_DETECT
+-
+ /*
+  * core reset bits
+  */
+@@ -188,64 +186,6 @@ static int __init bcm63xx_reset_bits_ini
+ 
+ 	return 0;
+ }
+-#else
+-
+-#ifdef CONFIG_BCM63XX_CPU_3368
+-static const u32 bcm63xx_reset_bits[] = {
+-	__GEN_RESET_BITS_TABLE(3368)
+-};
+-#define reset_reg PERF_SOFTRESET_6358_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6328
+-static const u32 bcm63xx_reset_bits[] = {
+-	__GEN_RESET_BITS_TABLE(6328)
+-};
+-#define reset_reg PERF_SOFTRESET_6328_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6338
+-static const u32 bcm63xx_reset_bits[] = {
+-	__GEN_RESET_BITS_TABLE(6338)
+-};
+-#define reset_reg PERF_SOFTRESET_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6345
+-static const u32 bcm63xx_reset_bits[] = { };
+-#define reset_reg 0
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6348
+-static const u32 bcm63xx_reset_bits[] = {
+-	__GEN_RESET_BITS_TABLE(6348)
+-};
+-#define reset_reg PERF_SOFTRESET_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6358
+-static const u32 bcm63xx_reset_bits[] = {
+-	__GEN_RESET_BITS_TABLE(6358)
+-};
+-#define reset_reg PERF_SOFTRESET_6358_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6362
+-static const u32 bcm63xx_reset_bits[] = {
+-	__GEN_RESET_BITS_TABLE(6362)
+-};
+-#define reset_reg PERF_SOFTRESET_6362_REG
+-#endif
+-
+-#ifdef CONFIG_BCM63XX_CPU_6368
+-static const u32 bcm63xx_reset_bits[] = {
+-	__GEN_RESET_BITS_TABLE(6368)
+-};
+-#define reset_reg PERF_SOFTRESET_6368_REG
+-#endif
+-
+-static int __init bcm63xx_reset_bits_init(void) { return 0; }
+-#endif
+ 
+ static DEFINE_SPINLOCK(reset_mutex);
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/313-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch b/target/linux/brcm63xx/patches-3.14/313-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch
new file mode 100644
index 0000000..49a3475
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/313-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-from-gpio.patch
@@ -0,0 +1,39 @@
+From 1aab93c5c97c55fef130726a6f58c9a1fd5b6240 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 3 Dec 2013 13:36:45 +0100
+Subject: [PATCH 4/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code from gpio
+
+---
+ arch/mips/bcm63xx/gpio.c | 14 --------------
+ 1 file changed, 14 deletions(-)
+
+--- a/arch/mips/bcm63xx/gpio.c
++++ b/arch/mips/bcm63xx/gpio.c
+@@ -18,19 +18,6 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+ 
+-#ifndef BCMCPU_RUNTIME_DETECT
+-#define gpio_out_low_reg	GPIO_DATA_LO_REG
+-#ifdef CONFIG_BCM63XX_CPU_6345
+-#ifdef gpio_out_low_reg
+-#undef gpio_out_low_reg
+-#define gpio_out_low_reg	GPIO_DATA_LO_REG_6345
+-#endif /* gpio_out_low_reg */
+-#endif /* CONFIG_BCM63XX_CPU_6345 */
+-
+-static inline void bcm63xx_gpio_out_low_reg_init(void)
+-{
+-}
+-#else /* ! BCMCPU_RUNTIME_DETECT */
+ static u32 gpio_out_low_reg;
+ 
+ static void bcm63xx_gpio_out_low_reg_init(void)
+@@ -44,7 +31,6 @@ static void bcm63xx_gpio_out_low_reg_ini
+ 		break;
+ 	}
+ }
+-#endif /* ! BCMCPU_RUNTIME_DETECT */
+ 
+ static DEFINE_SPINLOCK(bcm63xx_gpio_lock);
+ static u32 gpio_out_low, gpio_out_high;
diff --git a/target/linux/brcm63xx/patches-3.14/314-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch b/target/linux/brcm63xx/patches-3.14/314-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch
new file mode 100644
index 0000000..afde39b
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/314-MIPS-BCM63XX-remove-RUNTIME_DETECT-from-spi-code.patch
@@ -0,0 +1,80 @@
+From 94f819bc230bb61a9ff21da6c860a40ca68c2805 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 3 Dec 2013 13:43:35 +0100
+Subject: [PATCH 5/8] MIPS: BCM63XX: remove !RUNTIME_DETECT from spi code
+
+---
+ arch/mips/bcm63xx/dev-spi.c                        |  4 ---
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h     | 31 ----------------------
+ 2 files changed, 35 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -18,7 +18,6 @@
+ #include <bcm63xx_dev_spi.h>
+ #include <bcm63xx_regs.h>
+ 
+-#ifdef BCMCPU_RUNTIME_DETECT
+ /*
+  * register offsets
+  */
+@@ -41,9 +40,6 @@ static __init void bcm63xx_spi_regs_init
+ 		BCMCPU_IS_6362() || BCMCPU_IS_6368())
+ 		bcm63xx_regs_spi = bcm6358_regs_spi;
+ }
+-#else
+-static __init void bcm63xx_spi_regs_init(void) { }
+-#endif
+ 
+ static struct resource spi_resources[] = {
+ 	{
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+@@ -30,26 +30,6 @@ enum bcm63xx_regs_spi {
+ 	SPI_RX_DATA,
+ };
+ 
+-#define __GEN_SPI_RSET_BASE(__cpu, __rset)				\
+-	case SPI_## __rset:						\
+-		return SPI_## __cpu ##_## __rset;
+-
+-#define __GEN_SPI_RSET(__cpu)						\
+-	switch (reg) {							\
+-	__GEN_SPI_RSET_BASE(__cpu, CMD)					\
+-	__GEN_SPI_RSET_BASE(__cpu, INT_STATUS)				\
+-	__GEN_SPI_RSET_BASE(__cpu, INT_MASK_ST)				\
+-	__GEN_SPI_RSET_BASE(__cpu, INT_MASK)				\
+-	__GEN_SPI_RSET_BASE(__cpu, ST)					\
+-	__GEN_SPI_RSET_BASE(__cpu, CLK_CFG)				\
+-	__GEN_SPI_RSET_BASE(__cpu, FILL_BYTE)				\
+-	__GEN_SPI_RSET_BASE(__cpu, MSG_TAIL)				\
+-	__GEN_SPI_RSET_BASE(__cpu, RX_TAIL)				\
+-	__GEN_SPI_RSET_BASE(__cpu, MSG_CTL)				\
+-	__GEN_SPI_RSET_BASE(__cpu, MSG_DATA)				\
+-	__GEN_SPI_RSET_BASE(__cpu, RX_DATA)				\
+-	}
+-
+ #define __GEN_SPI_REGS_TABLE(__cpu)					\
+ 	[SPI_CMD]		= SPI_## __cpu ##_CMD,			\
+ 	[SPI_INT_STATUS]	= SPI_## __cpu ##_INT_STATUS,		\
+@@ -66,20 +46,9 @@ enum bcm63xx_regs_spi {
+ 
+ static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
+ {
+-#ifdef BCMCPU_RUNTIME_DETECT
+ 	extern const unsigned long *bcm63xx_regs_spi;
+ 
+ 	return bcm63xx_regs_spi[reg];
+-#else
+-#if defined(CONFIG_BCM63XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348)
+-	__GEN_SPI_RSET(6348)
+-#endif
+-#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6362) || \
+-	defined(CONFIG_BCM63XX_CPU_6368)
+-	__GEN_SPI_RSET(6358)
+-#endif
+-#endif
+-	return 0;
+ }
+ 
+ #endif /* BCM63XX_DEV_SPI_H */
diff --git a/target/linux/brcm63xx/patches-3.14/315-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch b/target/linux/brcm63xx/patches-3.14/315-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch
new file mode 100644
index 0000000..0dba2e2
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/315-MIPS-BCM63XX-remove-RUNTIME_DETECT-usage-from-enet-c.patch
@@ -0,0 +1,89 @@
+From ed6c71de07ad042691ec02e9eb97375ddc91ed01 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 3 Dec 2013 13:45:22 +0100
+Subject: [PATCH 6/8] MIPS: BCM63XX: remove !RUNTIME_DETECT usage from enet
+ code
+
+---
+ arch/mips/bcm63xx/dev-enet.c                       |  4 --
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h    | 46 ----------------------
+ 2 files changed, 50 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -14,7 +14,6 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+ 
+-#ifdef BCMCPU_RUNTIME_DETECT
+ static const unsigned long bcm6348_regs_enetdmac[] = {
+ 	[ENETDMAC_CHANCFG]	= ENETDMAC_CHANCFG_REG,
+ 	[ENETDMAC_IR]		= ENETDMAC_IR_REG,
+@@ -43,9 +42,6 @@ static __init void bcm63xx_enetdmac_regs
+ 	else
+ 		bcm63xx_regs_enetdmac = bcm6348_regs_enetdmac;
+ }
+-#else
+-static __init void bcm63xx_enetdmac_regs_init(void) { }
+-#endif
+ 
+ static struct resource shared_res[] = {
+ 	{
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+@@ -112,55 +112,9 @@ enum bcm63xx_regs_enetdmac {
+ 
+ static inline unsigned long bcm63xx_enetdmacreg(enum bcm63xx_regs_enetdmac reg)
+ {
+-#ifdef BCMCPU_RUNTIME_DETECT
+ 	extern const unsigned long *bcm63xx_regs_enetdmac;
+ 
+ 	return bcm63xx_regs_enetdmac[reg];
+-#else
+-#ifdef CONFIG_BCM63XX_CPU_6345
+-	switch (reg) {
+-	case ENETDMAC_CHANCFG:
+-		return ENETDMA_6345_CHANCFG_REG;
+-	case ENETDMAC_IR:
+-		return ENETDMA_6345_IR_REG;
+-	case ENETDMAC_IRMASK:
+-		return ENETDMA_6345_IRMASK_REG;
+-	case ENETDMAC_MAXBURST:
+-		return ENETDMA_6345_MAXBURST_REG;
+-	case ENETDMAC_BUFALLOC:
+-		return ENETDMA_6345_BUFALLOC_REG;
+-	case ENETDMAC_RSTART:
+-		return ENETDMA_6345_RSTART_REG;
+-	case ENETDMAC_FC:
+-		return ENETDMA_6345_FC_REG;
+-	case ENETDMAC_LEN:
+-		return ENETDMA_6345_LEN_REG;
+-	}
+-#endif
+-#if defined(CONFIG_BCM63XX_CPU_6328) || \
+-	defined(CONFIG_BCM63XX_CPU_6338) || \
+-	defined(CONFIG_BCM63XX_CPU_6348) || \
+-	defined(CONFIG_BCM63XX_CPU_6358) || \
+-	defined(CONFIG_BCM63XX_CPU_6362) || \
+-	defined(CONFIG_BCM63XX_CPU_6368)
+-	switch (reg) {
+-	case ENETDMAC_CHANCFG:
+-		return ENETDMAC_CHANCFG_REG;
+-	case ENETDMAC_IR:
+-		return ENETDMAC_IR_REG;
+-	case ENETDMAC_IRMASK:
+-		return ENETDMAC_IRMASK_REG;
+-	case ENETDMAC_MAXBURST:
+-		return ENETDMAC_MAXBURST_REG;
+-	case ENETDMAC_BUFALLOC:
+-	case ENETDMAC_RSTART:
+-	case ENETDMAC_FC:
+-	case ENETDMAC_LEN:
+-		return 0;
+-	}
+-#endif
+-#endif
+-	return 0;
+ }
+ 
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/316-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch b/target/linux/brcm63xx/patches-3.14/316-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch
new file mode 100644
index 0000000..6316b8d
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/316-MIPS-BCM63XX-remove-RUNTIME_DETECT-in-cpu-feature-ov.patch
@@ -0,0 +1,23 @@
+From 12c6957004d6770f4b34d59d8a3cafd5d8bfce15 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 3 Dec 2013 14:06:12 +0100
+Subject: [PATCH 7/8] MIPS: BCM63XX: remove !RUNTIME_DETECT in
+ cpu-feature-overrides
+
+All three SoCs have in common they have a BMIPS32/BMIPS3300 CPU, so
+we can replace this as no SoC with BMIPS4350 support enabled.
+---
+ arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
++++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
+@@ -24,7 +24,7 @@
+ #define cpu_has_smartmips		0
+ #define cpu_has_vtag_icache		0
+ 
+-#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCM63XX_CPU_6348) || defined(CONFIG_BCM63XX_CPU_6345) || defined(CONFIG_BCM63XX_CPU_6338))
++#if !defined(CONFIG_SYS_HAS_CPU_BMIPS4350)
+ #define cpu_has_dc_aliases		0
+ #endif
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/317-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch b/target/linux/brcm63xx/patches-3.14/317-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch
new file mode 100644
index 0000000..e40cfa0
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/317-MIPS-BCM63XX-remove-RUNTIME_DETECT-code-for-bcmcpu_g.patch
@@ -0,0 +1,199 @@
+From 78c3d2e796a28ad55f6c2310a11ab22e91bb52fc Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 2 Dec 2013 12:30:44 +0100
+Subject: [PATCH 8/8] MIPS: BCM63XX: remove !RUNTIME_DETECT code for
+ bcmcpu_get_id
+
+Use the same pattern as with get_*_cpu_type() to allow the compiler
+to remove code for non enabled devices.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/cpu.c                          |  11 +--
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 120 +++++++----------------
+ 2 files changed, 38 insertions(+), 93 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -24,7 +24,9 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
+ const int *bcm63xx_irqs;
+ EXPORT_SYMBOL(bcm63xx_irqs);
+ 
+-static u16 bcm63xx_cpu_id;
++u16 bcm63xx_cpu_id __read_mostly;
++EXPORT_SYMBOL(bcm63xx_cpu_id);
++
+ static u8 bcm63xx_cpu_rev;
+ static unsigned int bcm63xx_cpu_freq;
+ static unsigned int bcm63xx_memory_size;
+@@ -97,13 +99,6 @@ static const int bcm6368_irqs[] = {
+ 
+ };
+ 
+-u16 __bcm63xx_get_cpu_id(void)
+-{
+-	return bcm63xx_cpu_id;
+-}
+-
+-EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
+-
+ u8 bcm63xx_get_cpu_rev(void)
+ {
+ 	return bcm63xx_cpu_rev;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -19,118 +19,68 @@
+ #define BCM6368_CPU_ID		0x6368
+ 
+ void __init bcm63xx_cpu_init(void);
+-u16 __bcm63xx_get_cpu_id(void);
+ u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+ 
++static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
++{
++	switch (cpu_id) {
+ #ifdef CONFIG_BCM63XX_CPU_3368
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()	BCM3368_CPU_ID
+-# endif
+-# define BCMCPU_IS_3368()	(bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
+-#else
+-# define BCMCPU_IS_3368()	(0)
++		case BCM3368_CPU_ID:
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6328
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()	BCM6328_CPU_ID
+-# endif
+-# define BCMCPU_IS_6328()	(bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
+-#else
+-# define BCMCPU_IS_6328()	(0)
++		case BCM6328_CPU_ID:
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6338
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()	BCM6338_CPU_ID
+-# endif
+-# define BCMCPU_IS_6338()	(bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+-#else
+-# define BCMCPU_IS_6338()	(0)
++		case BCM6338_CPU_ID:
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6345
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()	BCM6345_CPU_ID
+-# endif
+-# define BCMCPU_IS_6345()	(bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
+-#else
+-# define BCMCPU_IS_6345()	(0)
++		case BCM6345_CPU_ID:
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6348
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()	BCM6348_CPU_ID
+-# endif
+-# define BCMCPU_IS_6348()	(bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
+-#else
+-# define BCMCPU_IS_6348()	(0)
++		case BCM6348_CPU_ID:
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()	BCM6358_CPU_ID
+-# endif
+-# define BCMCPU_IS_6358()	(bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
+-#else
+-# define BCMCPU_IS_6358()	(0)
++		case BCM6358_CPU_ID:
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6362
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()	BCM6362_CPU_ID
+-# endif
+-# define BCMCPU_IS_6362()	(bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+-#else
+-# define BCMCPU_IS_6362()	(0)
++		case BCM6362_CPU_ID:
+ #endif
+ 
+-
+ #ifdef CONFIG_BCM63XX_CPU_6368
+-# ifdef bcm63xx_get_cpu_id
+-#  undef bcm63xx_get_cpu_id
+-#  define bcm63xx_get_cpu_id()	__bcm63xx_get_cpu_id()
+-#  define BCMCPU_RUNTIME_DETECT
+-# else
+-#  define bcm63xx_get_cpu_id()	BCM6368_CPU_ID
+-# endif
+-# define BCMCPU_IS_6368()	(bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
+-#else
+-# define BCMCPU_IS_6368()	(0)
+-#endif
+-
+-#ifndef bcm63xx_get_cpu_id
+-#error "No CPU support configured"
++		case BCM6368_CPU_ID:
+ #endif
++		break;
++	default:
++		unreachable();
++	}
++
++	return cpu_id;
++}
++
++extern u16 bcm63xx_cpu_id;
++
++static inline u16 __pure bcm63xx_get_cpu_id(void)
++{
++	const u16 cpu_id = bcm63xx_cpu_id;
++
++	return __bcm63xx_get_cpu_id(cpu_id);
++}
++
++#define BCMCPU_IS_3368()	(bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
++#define BCMCPU_IS_6328()	(bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
++#define BCMCPU_IS_6338()	(bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
++#define BCMCPU_IS_6345()	(bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
++#define BCMCPU_IS_6348()	(bcm63xx_get_cpu_id() == BCM6348_CPU_ID)
++#define BCMCPU_IS_6358()	(bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
++#define BCMCPU_IS_6362()	(bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
++#define BCMCPU_IS_6368()	(bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
+ 
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-3.14/318-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch b/target/linux/brcm63xx/patches-3.14/318-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch
new file mode 100644
index 0000000..f4d98c3
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/318-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch
@@ -0,0 +1,42 @@
+From 653dcc09407a695efb203337c6f72515d4c4ee43 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 21 Mar 2013 17:05:15 +0100
+Subject: [PATCH 29/53] MIPS: BCM63XX: rename __dispatch_internal to
+ __dispatch_internal_32
+
+Make it follow the same naming convention as the other functions.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -19,7 +19,7 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
+ 
+-static void __dispatch_internal(void) __maybe_unused;
++static void __dispatch_internal_32(void) __maybe_unused;
+ static void __dispatch_internal_64(void) __maybe_unused;
+ static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
+ static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
+@@ -117,7 +117,7 @@ static void bcm63xx_init_irq(void)
+ 	}
+ 
+ 	if (irq_bits == 32) {
+-		dispatch_internal = __dispatch_internal;
++		dispatch_internal = __dispatch_internal_32;
+ 		internal_irq_mask = __internal_irq_mask_32;
+ 		internal_irq_unmask = __internal_irq_unmask_32;
+ 	} else {
+@@ -149,7 +149,7 @@ static inline void handle_internal(int i
+  * will resume the loop where it ended the last time we left this
+  * function.
+  */
+-static void __dispatch_internal(void)
++static void __dispatch_internal_32(void)
+ {
+ 	u32 pending;
+ 	static int i;
diff --git a/target/linux/brcm63xx/patches-3.14/319-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch b/target/linux/brcm63xx/patches-3.14/319-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch
new file mode 100644
index 0000000..fb57939
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/319-MIPS-BCM63XX-move-bcm63xx_init_irq-down.patch
@@ -0,0 +1,223 @@
+From c28c639b031385ecf965eecf3bfb532e88044c89 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Dec 2013 20:52:53 +0100
+Subject: [PATCH 30/53] MIPS: BCM63XX: move bcm63xx_init_irq down
+
+Allows up to drop the prototypes from the top.
+---
+ arch/mips/bcm63xx/irq.c | 190 +++++++++++++++++++++++-------------------------
+ 1 file changed, 92 insertions(+), 98 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -19,13 +19,6 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
+ 
+-static void __dispatch_internal_32(void) __maybe_unused;
+-static void __dispatch_internal_64(void) __maybe_unused;
+-static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
+-static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
+-static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
+-static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
+-
+ static u32 irq_stat_addr, irq_mask_addr;
+ static void (*dispatch_internal)(void);
+ static int is_ext_irq_cascaded;
+@@ -35,97 +28,6 @@ static unsigned int ext_irq_cfg_reg1, ex
+ static void (*internal_irq_mask)(unsigned int irq);
+ static void (*internal_irq_unmask)(unsigned int irq);
+ 
+-static void bcm63xx_init_irq(void)
+-{
+-	int irq_bits;
+-
+-	irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
+-	irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
+-
+-	switch (bcm63xx_get_cpu_id()) {
+-	case BCM3368_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_3368_REG;
+-		irq_mask_addr += PERF_IRQMASK_3368_REG;
+-		irq_bits = 32;
+-		ext_irq_count = 4;
+-		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+-		break;
+-	case BCM6328_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6328_REG;
+-		irq_mask_addr += PERF_IRQMASK_6328_REG;
+-		irq_bits = 64;
+-		ext_irq_count = 4;
+-		is_ext_irq_cascaded = 1;
+-		ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-		ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
+-		break;
+-	case BCM6338_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6338_REG;
+-		irq_mask_addr += PERF_IRQMASK_6338_REG;
+-		irq_bits = 32;
+-		ext_irq_count = 4;
+-		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
+-		break;
+-	case BCM6345_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6345_REG;
+-		irq_mask_addr += PERF_IRQMASK_6345_REG;
+-		irq_bits = 32;
+-		ext_irq_count = 4;
+-		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
+-		break;
+-	case BCM6348_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6348_REG;
+-		irq_mask_addr += PERF_IRQMASK_6348_REG;
+-		irq_bits = 32;
+-		ext_irq_count = 4;
+-		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
+-		break;
+-	case BCM6358_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6358_REG;
+-		irq_mask_addr += PERF_IRQMASK_6358_REG;
+-		irq_bits = 32;
+-		ext_irq_count = 4;
+-		is_ext_irq_cascaded = 1;
+-		ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-		ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
+-		break;
+-	case BCM6362_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6362_REG;
+-		irq_mask_addr += PERF_IRQMASK_6362_REG;
+-		irq_bits = 64;
+-		ext_irq_count = 4;
+-		is_ext_irq_cascaded = 1;
+-		ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-		ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+-		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
+-		break;
+-	case BCM6368_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6368_REG;
+-		irq_mask_addr += PERF_IRQMASK_6368_REG;
+-		irq_bits = 64;
+-		ext_irq_count = 6;
+-		is_ext_irq_cascaded = 1;
+-		ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
+-		ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
+-		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
+-		ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
+-		break;
+-	default:
+-		BUG();
+-	}
+-
+-	if (irq_bits == 32) {
+-		dispatch_internal = __dispatch_internal_32;
+-		internal_irq_mask = __internal_irq_mask_32;
+-		internal_irq_unmask = __internal_irq_unmask_32;
+-	} else {
+-		dispatch_internal = __dispatch_internal_64;
+-		internal_irq_mask = __internal_irq_mask_64;
+-		internal_irq_unmask = __internal_irq_unmask_64;
+-	}
+-}
+ 
+ static inline u32 get_ext_irq_perf_reg(int irq)
+ {
+@@ -451,6 +353,98 @@ static struct irqaction cpu_ext_cascade_
+ 	.flags		= IRQF_NO_THREAD,
+ };
+ 
++static void bcm63xx_init_irq(void)
++{
++	int irq_bits;
++
++	irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
++	irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
++
++	switch (bcm63xx_get_cpu_id()) {
++	case BCM3368_CPU_ID:
++		irq_stat_addr += PERF_IRQSTAT_3368_REG;
++		irq_mask_addr += PERF_IRQMASK_3368_REG;
++		irq_bits = 32;
++		ext_irq_count = 4;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
++		break;
++	case BCM6328_CPU_ID:
++		irq_stat_addr += PERF_IRQSTAT_6328_REG;
++		irq_mask_addr += PERF_IRQMASK_6328_REG;
++		irq_bits = 64;
++		ext_irq_count = 4;
++		is_ext_irq_cascaded = 1;
++		ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++		ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
++		break;
++	case BCM6338_CPU_ID:
++		irq_stat_addr += PERF_IRQSTAT_6338_REG;
++		irq_mask_addr += PERF_IRQMASK_6338_REG;
++		irq_bits = 32;
++		ext_irq_count = 4;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
++		break;
++	case BCM6345_CPU_ID:
++		irq_stat_addr += PERF_IRQSTAT_6345_REG;
++		irq_mask_addr += PERF_IRQMASK_6345_REG;
++		irq_bits = 32;
++		ext_irq_count = 4;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
++		break;
++	case BCM6348_CPU_ID:
++		irq_stat_addr += PERF_IRQSTAT_6348_REG;
++		irq_mask_addr += PERF_IRQMASK_6348_REG;
++		irq_bits = 32;
++		ext_irq_count = 4;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
++		break;
++	case BCM6358_CPU_ID:
++		irq_stat_addr += PERF_IRQSTAT_6358_REG;
++		irq_mask_addr += PERF_IRQMASK_6358_REG;
++		irq_bits = 32;
++		ext_irq_count = 4;
++		is_ext_irq_cascaded = 1;
++		ext_irq_start = BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++		ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
++		break;
++	case BCM6362_CPU_ID:
++		irq_stat_addr += PERF_IRQSTAT_6362_REG;
++		irq_mask_addr += PERF_IRQMASK_6362_REG;
++		irq_bits = 64;
++		ext_irq_count = 4;
++		is_ext_irq_cascaded = 1;
++		ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++		ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
++		break;
++	case BCM6368_CPU_ID:
++		irq_stat_addr += PERF_IRQSTAT_6368_REG;
++		irq_mask_addr += PERF_IRQMASK_6368_REG;
++		irq_bits = 64;
++		ext_irq_count = 6;
++		is_ext_irq_cascaded = 1;
++		ext_irq_start = BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++		ext_irq_end = BCM_6368_EXT_IRQ5 - IRQ_INTERNAL_BASE;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
++		ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
++		break;
++	default:
++		BUG();
++	}
++
++	if (irq_bits == 32) {
++		dispatch_internal = __dispatch_internal_32;
++		internal_irq_mask = __internal_irq_mask_32;
++		internal_irq_unmask = __internal_irq_unmask_32;
++	} else {
++		dispatch_internal = __dispatch_internal_64;
++		internal_irq_mask = __internal_irq_mask_64;
++		internal_irq_unmask = __internal_irq_unmask_64;
++	}
++}
++
+ void __init arch_init_irq(void)
+ {
+ 	int i;
diff --git a/target/linux/brcm63xx/patches-3.14/320-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch b/target/linux/brcm63xx/patches-3.14/320-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch
new file mode 100644
index 0000000..f0311ce
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/320-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch
@@ -0,0 +1,167 @@
+From 01bf26c51b427e24ac69f604d33f7d9360a9e470 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 18 Apr 2013 21:14:49 +0200
+Subject: [PATCH 31/53] MIPS: BCM63XX: replace irq dispatch code with a generic
+ version
+
+The generic version uses a variable length of u32 registers of u32/u64.
+This allows easier support for longer registers without having to rewrite
+verything.
+
+This "generic" version is not slower than the old version in the best case
+(= i == next set bit), and twice as fast in the worst case in 64 bits.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 130 +++++++++++++++++++++---------------------------
+ 1 file changed, 56 insertions(+), 74 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -51,47 +51,65 @@ static inline void handle_internal(int i
+  * will resume the loop where it ended the last time we left this
+  * function.
+  */
+-static void __dispatch_internal_32(void)
+-{
+-	u32 pending;
+-	static int i;
+-
+-	pending = bcm_readl(irq_stat_addr) & bcm_readl(irq_mask_addr);
+-
+-	if (!pending)
+-		return ;
+-
+-	while (1) {
+-		int to_call = i;
+ 
+-		i = (i + 1) & 0x1f;
+-		if (pending & (1 << to_call)) {
+-			handle_internal(to_call);
+-			break;
+-		}
+-	}
++#define BUILD_IPIC_INTERNAL(width)					\
++void __dispatch_internal_##width(void)					\
++{									\
++	u32 pending[width / 32];					\
++	unsigned int src, tgt;						\
++	bool irqs_pending = false;					\
++	static int i;							\
++									\
++	/* read registers in reverse order */				\
++	for (src = 0, tgt = (width / 32); src < (width / 32); src++) {	\
++		u32 val;						\
++									\
++		val = bcm_readl(irq_stat_addr + src * sizeof(u32));	\
++		val &= bcm_readl(irq_mask_addr + src * sizeof(u32));	\
++		pending[--tgt] = val;					\
++									\
++		if (val)						\
++			irqs_pending = true;				\
++	}								\
++									\
++	if (!irqs_pending)						\
++		return;							\
++									\
++	while (1) {							\
++		int to_call = i;					\
++									\
++		i = (i + 1) & (width - 1);				\
++		if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {	\
++			handle_internal(to_call);			\
++			break;						\
++		}							\
++	}								\
++}									\
++									\
++static void __internal_irq_mask_##width(unsigned int irq)		\
++{									\
++	u32 val;							\
++	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
++	unsigned bit = irq & 0x1f;					\
++									\
++	val = bcm_readl(irq_mask_addr + reg * sizeof(u32));		\
++	val &= ~(1 << bit);						\
++	bcm_writel(val, irq_mask_addr + reg * sizeof(u32));		\
++}									\
++									\
++static void __internal_irq_unmask_##width(unsigned int irq)		\
++{ 									\
++	u32 val;							\
++	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
++	unsigned bit = irq & 0x1f; 					\
++									\
++	val = bcm_readl(irq_mask_addr + reg * sizeof(u32));		\
++	val |= (1 << bit); 						\
++	bcm_writel(val, irq_mask_addr + reg * sizeof(u32));		\
+ }
+ 
+-static void __dispatch_internal_64(void)
+-{
+-	u64 pending;
+-	static int i;
+-
+-	pending = bcm_readq(irq_stat_addr) & bcm_readq(irq_mask_addr);
+-
+-	if (!pending)
+-		return ;
+-
+-	while (1) {
+-		int to_call = i;
+-
+-		i = (i + 1) & 0x3f;
+-		if (pending & (1ull << to_call)) {
+-			handle_internal(to_call);
+-			break;
+-		}
+-	}
+-}
++BUILD_IPIC_INTERNAL(32);
++BUILD_IPIC_INTERNAL(64);
+ 
+ asmlinkage void plat_irq_dispatch(void)
+ {
+@@ -128,42 +146,6 @@ asmlinkage void plat_irq_dispatch(void)
+  * internal IRQs operations: only mask/unmask on PERF irq mask
+  * register.
+  */
+-static void __internal_irq_mask_32(unsigned int irq)
+-{
+-	u32 mask;
+-
+-	mask = bcm_readl(irq_mask_addr);
+-	mask &= ~(1 << irq);
+-	bcm_writel(mask, irq_mask_addr);
+-}
+-
+-static void __internal_irq_mask_64(unsigned int irq)
+-{
+-	u64 mask;
+-
+-	mask = bcm_readq(irq_mask_addr);
+-	mask &= ~(1ull << irq);
+-	bcm_writeq(mask, irq_mask_addr);
+-}
+-
+-static void __internal_irq_unmask_32(unsigned int irq)
+-{
+-	u32 mask;
+-
+-	mask = bcm_readl(irq_mask_addr);
+-	mask |= (1 << irq);
+-	bcm_writel(mask, irq_mask_addr);
+-}
+-
+-static void __internal_irq_unmask_64(unsigned int irq)
+-{
+-	u64 mask;
+-
+-	mask = bcm_readq(irq_mask_addr);
+-	mask |= (1ull << irq);
+-	bcm_writeq(mask, irq_mask_addr);
+-}
+-
+ static void bcm63xx_internal_irq_mask(struct irq_data *d)
+ {
+ 	internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
diff --git a/target/linux/brcm63xx/patches-3.14/321-MIPS-BCM63XX-append-irq-line-number-to-irq_-stat-mas.patch b/target/linux/brcm63xx/patches-3.14/321-MIPS-BCM63XX-append-irq-line-number-to-irq_-stat-mas.patch
new file mode 100644
index 0000000..e53f230
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/321-MIPS-BCM63XX-append-irq-line-number-to-irq_-stat-mas.patch
@@ -0,0 +1,183 @@
+From 1003fb4a5ee9fcff518f20eefdee1a9bf500af7e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 25 Apr 2013 00:24:06 +0200
+Subject: [PATCH 32/53] MIPS: BCM63XX: append irq line number to
+ irq_{stat,mask}*
+
+The SMP capable irq controllers have two interupt output pins which are
+controlled through separate registers, so make the variables arrays.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c                           | 51 ++++++++++++-----------
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 16 +++----
+ 2 files changed, 34 insertions(+), 33 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -19,7 +19,8 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
+ 
+-static u32 irq_stat_addr, irq_mask_addr;
++static u32 irq_stat_addr[2];
++static u32 irq_mask_addr[2];
+ static void (*dispatch_internal)(void);
+ static int is_ext_irq_cascaded;
+ static unsigned int ext_irq_count;
+@@ -64,8 +65,8 @@ void __dispatch_internal_##width(void)
+ 	for (src = 0, tgt = (width / 32); src < (width / 32); src++) {	\
+ 		u32 val;						\
+ 									\
+-		val = bcm_readl(irq_stat_addr + src * sizeof(u32));	\
+-		val &= bcm_readl(irq_mask_addr + src * sizeof(u32));	\
++		val = bcm_readl(irq_stat_addr[0] + src * sizeof(u32));	\
++		val &= bcm_readl(irq_mask_addr[0] + src * sizeof(u32));	\
+ 		pending[--tgt] = val;					\
+ 									\
+ 		if (val)						\
+@@ -92,9 +93,9 @@ static void __internal_irq_mask_##width(
+ 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
+ 	unsigned bit = irq & 0x1f;					\
+ 									\
+-	val = bcm_readl(irq_mask_addr + reg * sizeof(u32));		\
++	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
+ 	val &= ~(1 << bit);						\
+-	bcm_writel(val, irq_mask_addr + reg * sizeof(u32));		\
++	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
+ }									\
+ 									\
+ static void __internal_irq_unmask_##width(unsigned int irq)		\
+@@ -103,9 +104,9 @@ static void __internal_irq_unmask_##widt
+ 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
+ 	unsigned bit = irq & 0x1f; 					\
+ 									\
+-	val = bcm_readl(irq_mask_addr + reg * sizeof(u32));		\
++	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
+ 	val |= (1 << bit); 						\
+-	bcm_writel(val, irq_mask_addr + reg * sizeof(u32));		\
++	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
+ }
+ 
+ BUILD_IPIC_INTERNAL(32);
+@@ -339,20 +340,20 @@ static void bcm63xx_init_irq(void)
+ {
+ 	int irq_bits;
+ 
+-	irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
+-	irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
++	irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
++	irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
+ 
+ 	switch (bcm63xx_get_cpu_id()) {
+ 	case BCM3368_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_3368_REG;
+-		irq_mask_addr += PERF_IRQMASK_3368_REG;
++		irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
++		irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
+ 		irq_bits = 32;
+ 		ext_irq_count = 4;
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+ 		break;
+ 	case BCM6328_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6328_REG;
+-		irq_mask_addr += PERF_IRQMASK_6328_REG;
++		irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
++		irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
+ 		irq_bits = 64;
+ 		ext_irq_count = 4;
+ 		is_ext_irq_cascaded = 1;
+@@ -361,29 +362,29 @@ static void bcm63xx_init_irq(void)
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
+ 		break;
+ 	case BCM6338_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6338_REG;
+-		irq_mask_addr += PERF_IRQMASK_6338_REG;
++		irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
++		irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
+ 		irq_bits = 32;
+ 		ext_irq_count = 4;
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
+ 		break;
+ 	case BCM6345_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6345_REG;
+-		irq_mask_addr += PERF_IRQMASK_6345_REG;
++		irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
++		irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
+ 		irq_bits = 32;
+ 		ext_irq_count = 4;
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
+ 		break;
+ 	case BCM6348_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6348_REG;
+-		irq_mask_addr += PERF_IRQMASK_6348_REG;
++		irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
++		irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
+ 		irq_bits = 32;
+ 		ext_irq_count = 4;
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
+ 		break;
+ 	case BCM6358_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6358_REG;
+-		irq_mask_addr += PERF_IRQMASK_6358_REG;
++		irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
++		irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
+ 		irq_bits = 32;
+ 		ext_irq_count = 4;
+ 		is_ext_irq_cascaded = 1;
+@@ -392,8 +393,8 @@ static void bcm63xx_init_irq(void)
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
+ 		break;
+ 	case BCM6362_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6362_REG;
+-		irq_mask_addr += PERF_IRQMASK_6362_REG;
++		irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
++		irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
+ 		irq_bits = 64;
+ 		ext_irq_count = 4;
+ 		is_ext_irq_cascaded = 1;
+@@ -402,8 +403,8 @@ static void bcm63xx_init_irq(void)
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
+ 		break;
+ 	case BCM6368_CPU_ID:
+-		irq_stat_addr += PERF_IRQSTAT_6368_REG;
+-		irq_mask_addr += PERF_IRQMASK_6368_REG;
++		irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
++		irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
+ 		irq_bits = 64;
+ 		ext_irq_count = 6;
+ 		is_ext_irq_cascaded = 1;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -215,23 +215,23 @@
+ 
+ /* Interrupt Mask register */
+ #define PERF_IRQMASK_3368_REG		0xc
+-#define PERF_IRQMASK_6328_REG		0x20
++#define PERF_IRQMASK_6328_REG(x)	(0x20 + (x) * 0x10)
+ #define PERF_IRQMASK_6338_REG		0xc
+ #define PERF_IRQMASK_6345_REG		0xc
+ #define PERF_IRQMASK_6348_REG		0xc
+-#define PERF_IRQMASK_6358_REG		0xc
+-#define PERF_IRQMASK_6362_REG		0x20
+-#define PERF_IRQMASK_6368_REG		0x20
++#define PERF_IRQMASK_6358_REG(x)	(0xc + (x) * 0x2c)
++#define PERF_IRQMASK_6362_REG(x)	(0x20 + (x) * 0x10)
++#define PERF_IRQMASK_6368_REG(x)	(0x20 + (x) * 0x10)
+ 
+ /* Interrupt Status register */
+ #define PERF_IRQSTAT_3368_REG		0x10
+-#define PERF_IRQSTAT_6328_REG		0x28
++#define PERF_IRQSTAT_6328_REG(x)	(0x28 + (x) * 0x10)
+ #define PERF_IRQSTAT_6338_REG		0x10
+ #define PERF_IRQSTAT_6345_REG		0x10
+ #define PERF_IRQSTAT_6348_REG		0x10
+-#define PERF_IRQSTAT_6358_REG		0x10
+-#define PERF_IRQSTAT_6362_REG		0x28
+-#define PERF_IRQSTAT_6368_REG		0x28
++#define PERF_IRQSTAT_6358_REG(x)	(0x10 + (x) * 0x2c)
++#define PERF_IRQSTAT_6362_REG(x)	(0x28 + (x) * 0x10)
++#define PERF_IRQSTAT_6368_REG(x)	(0x28 + (x) * 0x10)
+ 
+ /* External Interrupt Configuration register */
+ #define PERF_EXTIRQ_CFG_REG_3368	0x14
diff --git a/target/linux/brcm63xx/patches-3.14/322-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch b/target/linux/brcm63xx/patches-3.14/322-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch
new file mode 100644
index 0000000..a21137f
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/322-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch
@@ -0,0 +1,92 @@
+From 842f213228e6fc9fd6cca01ab5128623112aa7a9 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Thu, 25 Apr 2013 00:31:29 +0200
+Subject: [PATCH 33/53] MIPS: BCM63XX: populate irq_{stat,mask}_addr for second
+ pin
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -342,11 +342,15 @@ static void bcm63xx_init_irq(void)
+ 
+ 	irq_stat_addr[0] = bcm63xx_regset_address(RSET_PERF);
+ 	irq_mask_addr[0] = bcm63xx_regset_address(RSET_PERF);
++	irq_stat_addr[1] = bcm63xx_regset_address(RSET_PERF);
++	irq_mask_addr[1] = bcm63xx_regset_address(RSET_PERF);
+ 
+ 	switch (bcm63xx_get_cpu_id()) {
+ 	case BCM3368_CPU_ID:
+ 		irq_stat_addr[0] += PERF_IRQSTAT_3368_REG;
+ 		irq_mask_addr[0] += PERF_IRQMASK_3368_REG;
++		irq_stat_addr[1] = 0;
++		irq_stat_addr[1] = 0;
+ 		irq_bits = 32;
+ 		ext_irq_count = 4;
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+@@ -354,6 +358,8 @@ static void bcm63xx_init_irq(void)
+ 	case BCM6328_CPU_ID:
+ 		irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
+ 		irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
++		irq_stat_addr[1] += PERF_IRQSTAT_6328_REG(1);
++		irq_stat_addr[1] += PERF_IRQMASK_6328_REG(1);
+ 		irq_bits = 64;
+ 		ext_irq_count = 4;
+ 		is_ext_irq_cascaded = 1;
+@@ -364,6 +370,8 @@ static void bcm63xx_init_irq(void)
+ 	case BCM6338_CPU_ID:
+ 		irq_stat_addr[0] += PERF_IRQSTAT_6338_REG;
+ 		irq_mask_addr[0] += PERF_IRQMASK_6338_REG;
++		irq_stat_addr[1] = 0;
++		irq_mask_addr[1] = 0;
+ 		irq_bits = 32;
+ 		ext_irq_count = 4;
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
+@@ -371,6 +379,8 @@ static void bcm63xx_init_irq(void)
+ 	case BCM6345_CPU_ID:
+ 		irq_stat_addr[0] += PERF_IRQSTAT_6345_REG;
+ 		irq_mask_addr[0] += PERF_IRQMASK_6345_REG;
++		irq_stat_addr[1] = 0;
++		irq_mask_addr[1] = 0;
+ 		irq_bits = 32;
+ 		ext_irq_count = 4;
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
+@@ -378,6 +388,8 @@ static void bcm63xx_init_irq(void)
+ 	case BCM6348_CPU_ID:
+ 		irq_stat_addr[0] += PERF_IRQSTAT_6348_REG;
+ 		irq_mask_addr[0] += PERF_IRQMASK_6348_REG;
++		irq_stat_addr[1] = 0;
++		irq_mask_addr[1] = 0;
+ 		irq_bits = 32;
+ 		ext_irq_count = 4;
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
+@@ -385,6 +397,8 @@ static void bcm63xx_init_irq(void)
+ 	case BCM6358_CPU_ID:
+ 		irq_stat_addr[0] += PERF_IRQSTAT_6358_REG(0);
+ 		irq_mask_addr[0] += PERF_IRQMASK_6358_REG(0);
++		irq_stat_addr[1] += PERF_IRQSTAT_6358_REG(1);
++		irq_mask_addr[1] += PERF_IRQMASK_6358_REG(1);
+ 		irq_bits = 32;
+ 		ext_irq_count = 4;
+ 		is_ext_irq_cascaded = 1;
+@@ -395,6 +409,8 @@ static void bcm63xx_init_irq(void)
+ 	case BCM6362_CPU_ID:
+ 		irq_stat_addr[0] += PERF_IRQSTAT_6362_REG(0);
+ 		irq_mask_addr[0] += PERF_IRQMASK_6362_REG(0);
++		irq_stat_addr[1] += PERF_IRQSTAT_6362_REG(1);
++		irq_mask_addr[1] += PERF_IRQMASK_6362_REG(1);
+ 		irq_bits = 64;
+ 		ext_irq_count = 4;
+ 		is_ext_irq_cascaded = 1;
+@@ -405,6 +421,8 @@ static void bcm63xx_init_irq(void)
+ 	case BCM6368_CPU_ID:
+ 		irq_stat_addr[0] += PERF_IRQSTAT_6368_REG(0);
+ 		irq_mask_addr[0] += PERF_IRQMASK_6368_REG(0);
++		irq_stat_addr[1] += PERF_IRQSTAT_6368_REG(1);
++		irq_mask_addr[1] += PERF_IRQMASK_6368_REG(1);
+ 		irq_bits = 64;
+ 		ext_irq_count = 6;
+ 		is_ext_irq_cascaded = 1;
diff --git a/target/linux/brcm63xx/patches-3.14/323-MIPS-BCM63XX-add-pin-argument-to-dispatch-internal.patch b/target/linux/brcm63xx/patches-3.14/323-MIPS-BCM63XX-add-pin-argument-to-dispatch-internal.patch
new file mode 100644
index 0000000..1b8921c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/323-MIPS-BCM63XX-add-pin-argument-to-dispatch-internal.patch
@@ -0,0 +1,70 @@
+From a33bb660c712447ba8b561109cda6734954a6efa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 26 Apr 2013 11:21:16 +0200
+Subject: [PATCH 34/53] MIPS: BCM63XX: add pin argument to dispatch internal
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 18 ++++++++++--------
+ 1 file changed, 10 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -19,9 +19,10 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_irq.h>
+ 
++
+ static u32 irq_stat_addr[2];
+ static u32 irq_mask_addr[2];
+-static void (*dispatch_internal)(void);
++static void (*dispatch_internal)(int pin);
+ static int is_ext_irq_cascaded;
+ static unsigned int ext_irq_count;
+ static unsigned int ext_irq_start, ext_irq_end;
+@@ -54,19 +55,20 @@ static inline void handle_internal(int i
+  */
+ 
+ #define BUILD_IPIC_INTERNAL(width)					\
+-void __dispatch_internal_##width(void)					\
++void __dispatch_internal_##width(int pin)				\
+ {									\
+ 	u32 pending[width / 32];					\
+ 	unsigned int src, tgt;						\
+ 	bool irqs_pending = false;					\
+-	static int i;							\
++	static int i[2];						\
++	int *next = &i[pin];						\
+ 									\
+ 	/* read registers in reverse order */				\
+ 	for (src = 0, tgt = (width / 32); src < (width / 32); src++) {	\
+ 		u32 val;						\
+ 									\
+-		val = bcm_readl(irq_stat_addr[0] + src * sizeof(u32));	\
+-		val &= bcm_readl(irq_mask_addr[0] + src * sizeof(u32));	\
++		val = bcm_readl(irq_stat_addr[pin] + src * sizeof(u32)); \
++		val &= bcm_readl(irq_mask_addr[pin] + src * sizeof(u32)); \
+ 		pending[--tgt] = val;					\
+ 									\
+ 		if (val)						\
+@@ -77,9 +79,9 @@ void __dispatch_internal_##width(void)
+ 		return;							\
+ 									\
+ 	while (1) {							\
+-		int to_call = i;					\
++		int to_call = *next;					\
+ 									\
+-		i = (i + 1) & (width - 1);				\
++		*next = (*next + 1) & (width - 1);			\
+ 		if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {	\
+ 			handle_internal(to_call);			\
+ 			break;						\
+@@ -129,7 +131,7 @@ asmlinkage void plat_irq_dispatch(void)
+ 		if (cause & CAUSEF_IP1)
+ 			do_IRQ(1);
+ 		if (cause & CAUSEF_IP2)
+-			dispatch_internal();
++			dispatch_internal(0);
+ 		if (!is_ext_irq_cascaded) {
+ 			if (cause & CAUSEF_IP3)
+ 				do_IRQ(IRQ_EXT_0);
diff --git a/target/linux/brcm63xx/patches-3.14/324-MIPS-BCM63XX-protect-irq-register-accesses.patch b/target/linux/brcm63xx/patches-3.14/324-MIPS-BCM63XX-protect-irq-register-accesses.patch
new file mode 100644
index 0000000..c38137d
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/324-MIPS-BCM63XX-protect-irq-register-accesses.patch
@@ -0,0 +1,158 @@
+From 85257b702e1d4c6dcc839c737833c42ca53bae93 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 21 Apr 2013 15:38:56 +0200
+Subject: [PATCH 35/53] MIPS: BCM63XX: protect irq register accesses
+
+---
+ arch/mips/bcm63xx/irq.c | 26 ++++++++++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -12,6 +12,7 @@
+ #include <linux/interrupt.h>
+ #include <linux/module.h>
+ #include <linux/irq.h>
++#include <linux/spinlock.h>
+ #include <asm/irq_cpu.h>
+ #include <asm/mipsregs.h>
+ #include <bcm63xx_cpu.h>
+@@ -20,6 +21,9 @@
+ #include <bcm63xx_irq.h>
+ 
+ 
++static DEFINE_SPINLOCK(ipic_lock);
++static DEFINE_SPINLOCK(epic_lock);
++
+ static u32 irq_stat_addr[2];
+ static u32 irq_mask_addr[2];
+ static void (*dispatch_internal)(int pin);
+@@ -62,8 +66,10 @@ void __dispatch_internal_##width(int pin
+ 	bool irqs_pending = false;					\
+ 	static int i[2];						\
+ 	int *next = &i[pin];						\
++	unsigned long flags;						\
+ 									\
+ 	/* read registers in reverse order */				\
++	spin_lock_irqsave(&ipic_lock, flags);				\
+ 	for (src = 0, tgt = (width / 32); src < (width / 32); src++) {	\
+ 		u32 val;						\
+ 									\
+@@ -74,6 +80,7 @@ void __dispatch_internal_##width(int pin
+ 		if (val)						\
+ 			irqs_pending = true;				\
+ 	}								\
++	spin_unlock_irqrestore(&ipic_lock, flags);			\
+ 									\
+ 	if (!irqs_pending)						\
+ 		return;							\
+@@ -94,10 +101,13 @@ static void __internal_irq_mask_##width(
+ 	u32 val;							\
+ 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
+ 	unsigned bit = irq & 0x1f;					\
++	unsigned long flags;						\
+ 									\
++	spin_lock_irqsave(&ipic_lock, flags);				\
+ 	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
+ 	val &= ~(1 << bit);						\
+ 	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
++	spin_unlock_irqrestore(&ipic_lock, flags);			\
+ }									\
+ 									\
+ static void __internal_irq_unmask_##width(unsigned int irq)		\
+@@ -105,10 +115,13 @@ static void __internal_irq_unmask_##widt
+ 	u32 val;							\
+ 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
+ 	unsigned bit = irq & 0x1f; 					\
++	unsigned long flags;						\
+ 									\
++	spin_lock_irqsave(&ipic_lock, flags);				\
+ 	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
+ 	val |= (1 << bit); 						\
+ 	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
++	spin_unlock_irqrestore(&ipic_lock, flags);			\
+ }
+ 
+ BUILD_IPIC_INTERNAL(32);
+@@ -167,8 +180,10 @@ static void bcm63xx_external_irq_mask(st
+ {
+ 	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+ 	u32 reg, regaddr;
++	unsigned long flags;
+ 
+ 	regaddr = get_ext_irq_perf_reg(irq);
++	spin_lock_irqsave(&epic_lock, flags);
+ 	reg = bcm_perf_readl(regaddr);
+ 
+ 	if (BCMCPU_IS_6348())
+@@ -177,6 +192,8 @@ static void bcm63xx_external_irq_mask(st
+ 		reg &= ~EXTIRQ_CFG_MASK(irq % 4);
+ 
+ 	bcm_perf_writel(reg, regaddr);
++	spin_unlock_irqrestore(&epic_lock, flags);
++
+ 	if (is_ext_irq_cascaded)
+ 		internal_irq_mask(irq + ext_irq_start);
+ }
+@@ -185,8 +202,10 @@ static void bcm63xx_external_irq_unmask(
+ {
+ 	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+ 	u32 reg, regaddr;
++	unsigned long flags;
+ 
+ 	regaddr = get_ext_irq_perf_reg(irq);
++	spin_lock_irqsave(&epic_lock, flags);
+ 	reg = bcm_perf_readl(regaddr);
+ 
+ 	if (BCMCPU_IS_6348())
+@@ -195,6 +214,7 @@ static void bcm63xx_external_irq_unmask(
+ 		reg |= EXTIRQ_CFG_MASK(irq % 4);
+ 
+ 	bcm_perf_writel(reg, regaddr);
++	spin_unlock_irqrestore(&epic_lock, flags);
+ 
+ 	if (is_ext_irq_cascaded)
+ 		internal_irq_unmask(irq + ext_irq_start);
+@@ -204,8 +224,10 @@ static void bcm63xx_external_irq_clear(s
+ {
+ 	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+ 	u32 reg, regaddr;
++	unsigned long flags;
+ 
+ 	regaddr = get_ext_irq_perf_reg(irq);
++	spin_lock_irqsave(&epic_lock, flags);
+ 	reg = bcm_perf_readl(regaddr);
+ 
+ 	if (BCMCPU_IS_6348())
+@@ -214,6 +236,7 @@ static void bcm63xx_external_irq_clear(s
+ 		reg |= EXTIRQ_CFG_CLEAR(irq % 4);
+ 
+ 	bcm_perf_writel(reg, regaddr);
++	spin_unlock_irqrestore(&epic_lock, flags);
+ }
+ 
+ static int bcm63xx_external_irq_set_type(struct irq_data *d,
+@@ -222,6 +245,7 @@ static int bcm63xx_external_irq_set_type
+ 	unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
+ 	u32 reg, regaddr;
+ 	int levelsense, sense, bothedge;
++	unsigned long flags;
+ 
+ 	flow_type &= IRQ_TYPE_SENSE_MASK;
+ 
+@@ -256,6 +280,7 @@ static int bcm63xx_external_irq_set_type
+ 	}
+ 
+ 	regaddr = get_ext_irq_perf_reg(irq);
++	spin_lock_irqsave(&epic_lock, flags);
+ 	reg = bcm_perf_readl(regaddr);
+ 	irq %= 4;
+ 
+@@ -300,6 +325,7 @@ static int bcm63xx_external_irq_set_type
+ 	}
+ 
+ 	bcm_perf_writel(reg, regaddr);
++	spin_unlock_irqrestore(&epic_lock, flags);
+ 
+ 	irqd_set_trigger_type(d, flow_type);
+ 	if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
diff --git a/target/linux/brcm63xx/patches-3.14/325-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch b/target/linux/brcm63xx/patches-3.14/325-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch
new file mode 100644
index 0000000..189965a
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/325-MIPS-BCM63XX-wire-up-the-second-cpu-s-irq-line.patch
@@ -0,0 +1,92 @@
+From df6661d1b5c001eb91ce07f364fd5b6468fd6f99 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 26 Apr 2013 12:03:15 +0200
+Subject: [PATCH 36/53] MIPS: BCM63XX: wire up the second cpu's irq line
+
+---
+ arch/mips/bcm63xx/irq.c | 44 +++++++++++++++++++++++++++++++++++++-------
+ 1 file changed, 37 insertions(+), 7 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -102,11 +102,17 @@ static void __internal_irq_mask_##width(
+ 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
+ 	unsigned bit = irq & 0x1f;					\
+ 	unsigned long flags;						\
++	int cpu;							\
+ 									\
+ 	spin_lock_irqsave(&ipic_lock, flags);				\
+-	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
+-	val &= ~(1 << bit);						\
+-	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
++	for_each_present_cpu(cpu) {					\
++		if (!irq_mask_addr[cpu])				\
++			break;						\
++									\
++		val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
++		val &= ~(1 << bit);					\
++		bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
++	}								\
+ 	spin_unlock_irqrestore(&ipic_lock, flags);			\
+ }									\
+ 									\
+@@ -116,11 +122,20 @@ static void __internal_irq_unmask_##widt
+ 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
+ 	unsigned bit = irq & 0x1f; 					\
+ 	unsigned long flags;						\
++	int cpu;							\
+ 									\
+ 	spin_lock_irqsave(&ipic_lock, flags);				\
+-	val = bcm_readl(irq_mask_addr[0] + reg * sizeof(u32));		\
+-	val |= (1 << bit); 						\
+-	bcm_writel(val, irq_mask_addr[0] + reg * sizeof(u32));		\
++	for_each_present_cpu(cpu) {					\
++		if (!irq_mask_addr[cpu])				\
++			break;						\
++									\
++		val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
++		if (cpu_online(cpu))					\
++			val |= (1 << bit); 				\
++		else							\
++			val &= ~(1 << bit);				\
++		bcm_writel(val, irq_mask_addr[cpu] + reg * sizeof(u32));\
++	}								\
+ 	spin_unlock_irqrestore(&ipic_lock, flags);			\
+ }
+ 
+@@ -145,7 +160,10 @@ asmlinkage void plat_irq_dispatch(void)
+ 			do_IRQ(1);
+ 		if (cause & CAUSEF_IP2)
+ 			dispatch_internal(0);
+-		if (!is_ext_irq_cascaded) {
++		if (is_ext_irq_cascaded) {
++			if (cause & CAUSEF_IP3)
++				dispatch_internal(1);
++		} else {
+ 			if (cause & CAUSEF_IP3)
+ 				do_IRQ(IRQ_EXT_0);
+ 			if (cause & CAUSEF_IP4)
+@@ -358,6 +376,14 @@ static struct irqaction cpu_ip2_cascade_
+ 	.flags		= IRQF_NO_THREAD,
+ };
+ 
++#ifdef CONFIG_SMP
++static struct irqaction cpu_ip3_cascade_action = {
++	.handler	= no_action,
++	.name		= "cascade_ip3",
++	.flags		= IRQF_NO_THREAD,
++};
++#endif
++
+ static struct irqaction cpu_ext_cascade_action = {
+ 	.handler	= no_action,
+ 	.name		= "cascade_extirq",
+@@ -494,4 +520,8 @@ void __init arch_init_irq(void)
+ 	}
+ 
+ 	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
++#ifdef CONFIG_SMP
++	if (is_ext_irq_cascaded)
++		setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
++#endif
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/326-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch b/target/linux/brcm63xx/patches-3.14/326-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch
new file mode 100644
index 0000000..468cbc3
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/326-MIPS-BCM63XX-use-irq_desc-as-argument-for-un-mask.patch
@@ -0,0 +1,83 @@
+From b665117faa0dfde70689502fc420d72bbf8e6bd4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Tue, 30 Apr 2013 11:26:53 +0200
+Subject: [PATCH 37/53] MIPS: BCM63XX: use irq_desc as argument for (un)mask
+
+In preparation for applying affinity, use the irq descriptor as the
+argument for (un)mask.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 18 ++++++++++--------
+ 1 file changed, 10 insertions(+), 8 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -31,8 +31,8 @@ static int is_ext_irq_cascaded;
+ static unsigned int ext_irq_count;
+ static unsigned int ext_irq_start, ext_irq_end;
+ static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
+-static void (*internal_irq_mask)(unsigned int irq);
+-static void (*internal_irq_unmask)(unsigned int irq);
++static void (*internal_irq_mask)(struct irq_data *d);
++static void (*internal_irq_unmask)(struct irq_data *d);
+ 
+ 
+ static inline u32 get_ext_irq_perf_reg(int irq)
+@@ -96,9 +96,10 @@ void __dispatch_internal_##width(int pin
+ 	}								\
+ }									\
+ 									\
+-static void __internal_irq_mask_##width(unsigned int irq)		\
++static void __internal_irq_mask_##width(struct irq_data *d)		\
+ {									\
+ 	u32 val;							\
++	unsigned irq = d->irq - IRQ_INTERNAL_BASE;			\
+ 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
+ 	unsigned bit = irq & 0x1f;					\
+ 	unsigned long flags;						\
+@@ -116,9 +117,10 @@ static void __internal_irq_mask_##width(
+ 	spin_unlock_irqrestore(&ipic_lock, flags);			\
+ }									\
+ 									\
+-static void __internal_irq_unmask_##width(unsigned int irq)		\
++static void __internal_irq_unmask_##width(struct irq_data *d)		\
+ { 									\
+ 	u32 val;							\
++	unsigned irq = d->irq - IRQ_INTERNAL_BASE;			\
+ 	unsigned reg = (irq / 32) ^ (width/32 - 1);			\
+ 	unsigned bit = irq & 0x1f; 					\
+ 	unsigned long flags;						\
+@@ -182,12 +184,12 @@ asmlinkage void plat_irq_dispatch(void)
+  */
+ static void bcm63xx_internal_irq_mask(struct irq_data *d)
+ {
+-	internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
++	internal_irq_mask(d);
+ }
+ 
+ static void bcm63xx_internal_irq_unmask(struct irq_data *d)
+ {
+-	internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE);
++	internal_irq_unmask(d);
+ }
+ 
+ /*
+@@ -213,7 +215,7 @@ static void bcm63xx_external_irq_mask(st
+ 	spin_unlock_irqrestore(&epic_lock, flags);
+ 
+ 	if (is_ext_irq_cascaded)
+-		internal_irq_mask(irq + ext_irq_start);
++		internal_irq_mask(irq_get_irq_data(irq + ext_irq_start));
+ }
+ 
+ static void bcm63xx_external_irq_unmask(struct irq_data *d)
+@@ -235,7 +237,7 @@ static void bcm63xx_external_irq_unmask(
+ 	spin_unlock_irqrestore(&epic_lock, flags);
+ 
+ 	if (is_ext_irq_cascaded)
+-		internal_irq_unmask(irq + ext_irq_start);
++		internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start));
+ }
+ 
+ static void bcm63xx_external_irq_clear(struct irq_data *d)
diff --git a/target/linux/brcm63xx/patches-3.14/327-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch b/target/linux/brcm63xx/patches-3.14/327-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch
new file mode 100644
index 0000000..9394e23
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/327-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch
@@ -0,0 +1,111 @@
+From 9249f2f6a309e3f45c35d16decdcc5b2cadcadb8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Fri, 26 Apr 2013 12:06:03 +0200
+Subject: [PATCH 38/53] MIPS: BCM63XX: allow setting affinity for IPIC
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/irq.c | 43 +++++++++++++++++++++++++++++++++++++------
+ 1 file changed, 37 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -32,7 +32,7 @@ static unsigned int ext_irq_count;
+ static unsigned int ext_irq_start, ext_irq_end;
+ static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
+ static void (*internal_irq_mask)(struct irq_data *d);
+-static void (*internal_irq_unmask)(struct irq_data *d);
++static void (*internal_irq_unmask)(struct irq_data *d, const struct cpumask *m);
+ 
+ 
+ static inline u32 get_ext_irq_perf_reg(int irq)
+@@ -51,6 +51,20 @@ static inline void handle_internal(int i
+ 		do_IRQ(intbit + IRQ_INTERNAL_BASE);
+ }
+ 
++static inline int enable_irq_for_cpu(int cpu, struct irq_data *d,
++				     const struct cpumask *m)
++{
++	bool enable = cpu_online(cpu);
++#ifdef CONFIG_SMP
++
++	if (m)
++		enable &= cpu_isset(cpu, *m);
++	else if (irqd_affinity_was_set(d))
++		enable &= cpu_isset(cpu, *d->affinity);
++#endif
++	return enable;
++}
++
+ /*
+  * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not
+  * prioritize any interrupt relatively to another. the static counter
+@@ -117,7 +131,8 @@ static void __internal_irq_mask_##width(
+ 	spin_unlock_irqrestore(&ipic_lock, flags);			\
+ }									\
+ 									\
+-static void __internal_irq_unmask_##width(struct irq_data *d)		\
++static void __internal_irq_unmask_##width(struct irq_data *d,		\
++					  const struct cpumask *m)	\
+ { 									\
+ 	u32 val;							\
+ 	unsigned irq = d->irq - IRQ_INTERNAL_BASE;			\
+@@ -132,7 +147,7 @@ static void __internal_irq_unmask_##widt
+ 			break;						\
+ 									\
+ 		val = bcm_readl(irq_mask_addr[cpu] + reg * sizeof(u32));\
+-		if (cpu_online(cpu))					\
++		if (enable_irq_for_cpu(cpu, d, m))			\
+ 			val |= (1 << bit); 				\
+ 		else							\
+ 			val &= ~(1 << bit);				\
+@@ -189,7 +204,7 @@ static void bcm63xx_internal_irq_mask(st
+ 
+ static void bcm63xx_internal_irq_unmask(struct irq_data *d)
+ {
+-	internal_irq_unmask(d);
++	internal_irq_unmask(d, NULL);
+ }
+ 
+ /*
+@@ -237,7 +252,8 @@ static void bcm63xx_external_irq_unmask(
+ 	spin_unlock_irqrestore(&epic_lock, flags);
+ 
+ 	if (is_ext_irq_cascaded)
+-		internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start));
++		internal_irq_unmask(irq_get_irq_data(irq + ext_irq_start),
++				    NULL);
+ }
+ 
+ static void bcm63xx_external_irq_clear(struct irq_data *d)
+@@ -356,6 +372,18 @@ static int bcm63xx_external_irq_set_type
+ 	return IRQ_SET_MASK_OK_NOCOPY;
+ }
+ 
++#ifdef CONFIG_SMP
++static int bcm63xx_internal_set_affinity(struct irq_data *data,
++					 const struct cpumask *dest,
++					 bool force)
++{
++	if (!irqd_irq_disabled(data))
++		internal_irq_unmask(data, dest);
++
++	return 0;
++}
++#endif
++
+ static struct irq_chip bcm63xx_internal_irq_chip = {
+ 	.name		= "bcm63xx_ipic",
+ 	.irq_mask	= bcm63xx_internal_irq_mask,
+@@ -523,7 +551,10 @@ void __init arch_init_irq(void)
+ 
+ 	setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
+ #ifdef CONFIG_SMP
+-	if (is_ext_irq_cascaded)
++	if (is_ext_irq_cascaded) {
+ 		setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
++		bcm63xx_internal_irq_chip.irq_set_affinity =
++			bcm63xx_internal_set_affinity;
++	}
+ #endif
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/328-cfe_simplify_detection.patch b/target/linux/brcm63xx/patches-3.14/328-cfe_simplify_detection.patch
new file mode 100644
index 0000000..e05c91d
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/328-cfe_simplify_detection.patch
@@ -0,0 +1,20 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
+@@ -1,6 +1,8 @@
+ #ifndef BCM63XX_BOARD_H_
+ #define BCM63XX_BOARD_H_
+ 
++#include <asm/bootinfo.h>
++
+ const char *board_get_name(void);
+ 
+ void board_prom_init(void);
+@@ -9,4 +11,8 @@ void board_setup(void);
+ 
+ int board_register_devices(void);
+ 
++static inline bool bcm63xx_is_cfe_present(void) {
++	return fw_arg3 == 0x43464531;
++}
++
+ #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/brcm63xx/patches-3.14/329-bcm63xxpart_use_cfedetection.patch b/target/linux/brcm63xx/patches-3.14/329-bcm63xxpart_use_cfedetection.patch
new file mode 100644
index 0000000..dedd728
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/329-bcm63xxpart_use_cfedetection.patch
@@ -0,0 +1,51 @@
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -35,7 +35,7 @@
+ 
+ #include <asm/mach-bcm63xx/bcm63xx_nvram.h>
+ #include <linux/bcm963xx_tag.h>
+-#include <asm/mach-bcm63xx/board_bcm963xx.h>
++#include <asm/mach-bcm63xx/bcm63xx_board.h>
+ 
+ #define BCM63XX_EXTENDED_SIZE	0xBFC00000	/* Extended flash address */
+ 
+@@ -43,30 +43,6 @@
+ 
+ #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
+ 
+-static int bcm63xx_detect_cfe(struct mtd_info *master)
+-{
+-	char buf[9];
+-	int ret;
+-	size_t retlen;
+-
+-	ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
+-		       (void *)buf);
+-	buf[retlen] = 0;
+-
+-	if (ret)
+-		return ret;
+-
+-	if (strncmp("cfe-v", buf, 5) == 0)
+-		return 0;
+-
+-	/* very old CFE's do not have the cfe-v string, so check for magic */
+-	ret = mtd_read(master, BCM63XX_CFE_MAGIC_OFFSET, 8, &retlen,
+-		       (void *)buf);
+-	buf[retlen] = 0;
+-
+-	return strncmp("CFE1CFE1", buf, 8);
+-}
+-
+ static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
+ 					struct mtd_partition **pparts,
+ 					struct mtd_part_parser_data *data)
+@@ -85,7 +61,7 @@ static int bcm63xx_parse_cfe_partitions(
+ 	u32 computed_crc;
+ 	bool rootfs_first = false;
+ 
+-	if (bcm63xx_detect_cfe(master))
++	if (!bcm63xx_is_cfe_present())
+ 		return -EINVAL;
+ 
+ 	cfe_erasesize = max_t(uint32_t, master->erasesize,
diff --git a/target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch b/target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
new file mode 100644
index 0000000..3f24473
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/330-MIPS-BCM63XX-add-a-new-cpu-variant-helper.patch
@@ -0,0 +1,77 @@
+From c50acd37b425a8a907a6f7f93aa2e658256e79ce Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:08:36 +0100
+Subject: [PATCH 40/53] MIPS: BCM63XX: add a new cpu variant helper
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++++++++++++
+ 2 files changed, 28 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -27,6 +27,8 @@ EXPORT_SYMBOL(bcm63xx_irqs);
+ u16 bcm63xx_cpu_id __read_mostly;
+ EXPORT_SYMBOL(bcm63xx_cpu_id);
+ 
++static u32 bcm63xx_cpu_variant __read_mostly;
++
+ static u8 bcm63xx_cpu_rev;
+ static unsigned int bcm63xx_cpu_freq;
+ static unsigned int bcm63xx_memory_size;
+@@ -99,6 +101,13 @@ static const int bcm6368_irqs[] = {
+ 
+ };
+ 
++u32 bcm63xx_get_cpu_variant(void)
++{
++	return bcm63xx_cpu_variant;
++}
++
++EXPORT_SYMBOL(bcm63xx_get_cpu_variant);
++
+ u8 bcm63xx_get_cpu_rev(void)
+ {
+ 	return bcm63xx_cpu_rev;
+@@ -334,6 +343,7 @@ void __init bcm63xx_cpu_init(void)
+ 	/* read out CPU type */
+ 	tmp = bcm_readl(chipid_reg);
+ 	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
++	bcm63xx_cpu_variant = bcm63xx_cpu_id;
+ 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+ 
+ 	switch (bcm63xx_cpu_id) {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -19,6 +19,7 @@
+ #define BCM6368_CPU_ID		0x6368
+ 
+ void __init bcm63xx_cpu_init(void);
++u32 bcm63xx_get_cpu_variant(void);
+ u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+ 
+@@ -82,6 +83,23 @@ static inline u16 __pure bcm63xx_get_cpu
+ #define BCMCPU_IS_6362()	(bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+ #define BCMCPU_IS_6368()	(bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
+ 
++#define BCMCPU_VARIANT_IS_3368() \
++	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6328() \
++	(bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
++#define BCMCPU_VARIANT_IS_6338() \
++	(bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
++#define BCMCPU_VARIANT_IS_6345() \
++	(bcm63xx_get_cpu_variant() == BCM6345_CPU_ID)
++#define BCMCPU_VARIANT_IS_6348() \
++	(bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
++#define BCMCPU_VARIANT_IS_6358() \
++	(bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
++#define BCMCPU_VARIANT_IS_6362() \
++	(bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
++#define BCMCPU_VARIANT_IS_6368() \
++	(bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
++
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
+  * address of these sets do change.
diff --git a/target/linux/brcm63xx/patches-3.14/331-MIPS-BCM63XX-define-variant-id-field.patch b/target/linux/brcm63xx/patches-3.14/331-MIPS-BCM63XX-define-variant-id-field.patch
new file mode 100644
index 0000000..0ffc5bd
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/331-MIPS-BCM63XX-define-variant-id-field.patch
@@ -0,0 +1,20 @@
+From 9cd8b4a2ee9d0e6a5b91845bdd6f4b7e114fc8c4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:22:41 +0100
+Subject: [PATCH 41/53] MIPS: BCM63XX: define variant id field
+
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -9,6 +9,8 @@
+ #define PERF_REV_REG			0x0
+ #define REV_CHIPID_SHIFT		16
+ #define REV_CHIPID_MASK			(0xffff << REV_CHIPID_SHIFT)
++#define REV_VARID_SHIFT			8
++#define REV_VARID_MASK			(0xf << REV_VARID_SHIFT)
+ #define REV_REVID_SHIFT			0
+ #define REV_REVID_MASK			(0xff << REV_REVID_SHIFT)
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-bcm6328-variants.patch b/target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-bcm6328-variants.patch
new file mode 100644
index 0000000..bd30b27
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/332-MIPS-BCM63XX-detect-bcm6328-variants.patch
@@ -0,0 +1,67 @@
+From 6c8d94aaf5e2f0a3327e4f69ccd980bd5617f925 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:30:59 +0100
+Subject: [PATCH 42/53] MIPS: BCM63XX: detect bcm6328 variants
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 10 ++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |  8 ++++++--
+ 2 files changed, 16 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -306,6 +306,7 @@ void __init bcm63xx_cpu_init(void)
+ 	struct cpuinfo_mips *c = &current_cpu_data;
+ 	unsigned int cpu = smp_processor_id();
+ 	u32 chipid_reg;
++	u8 __maybe_unused varid = 0;
+ 
+ 	/* soc registers location depends on cpu type */
+ 	chipid_reg = 0;
+@@ -345,6 +346,7 @@ void __init bcm63xx_cpu_init(void)
+ 	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+ 	bcm63xx_cpu_variant = bcm63xx_cpu_id;
+ 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
++	varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
+ 
+ 	switch (bcm63xx_cpu_id) {
+ 	case BCM3368_CPU_ID:
+@@ -354,6 +356,14 @@ void __init bcm63xx_cpu_init(void)
+ 	case BCM6328_CPU_ID:
+ 		bcm63xx_regs_base = bcm6328_regs_base;
+ 		bcm63xx_irqs = bcm6328_irqs;
++
++		if (varid == 1)
++			bcm63xx_cpu_variant = BCM63281_CPU_ID;
++		else if (varid == 3)
++			bcm63xx_cpu_variant = BCM63283_CPU_ID;
++		else
++			pr_warn("unknown BCM6328 variant: %x\n", varid);
++
+ 		break;
+ 	case BCM6338_CPU_ID:
+ 		bcm63xx_regs_base = bcm6338_regs_base;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -11,6 +11,8 @@
+  */
+ #define BCM3368_CPU_ID		0x3368
+ #define BCM6328_CPU_ID		0x6328
++#define BCM63281_CPU_ID		0x63281
++#define BCM63283_CPU_ID		0x63283
+ #define BCM6338_CPU_ID		0x6338
+ #define BCM6345_CPU_ID		0x6345
+ #define BCM6348_CPU_ID		0x6348
+@@ -85,8 +87,10 @@ static inline u16 __pure bcm63xx_get_cpu
+ 
+ #define BCMCPU_VARIANT_IS_3368() \
+ 	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
+-#define BCMCPU_VARIANT_IS_6328() \
+-	(bcm63xx_get_cpu_variant() == BCM6328_CPU_ID)
++#define BCMCPU_VARIANT_IS_63281() \
++	(bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
++#define BCMCPU_VARIANT_IS_63283() \
++	(bcm63xx_get_cpu_variant() == BCM63283_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6338() \
+ 	(bcm63xx_get_cpu_variant() == BCM6338_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6345() \
diff --git a/target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch b/target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
new file mode 100644
index 0000000..57d5b48
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/333-MIPS-BCM63XX-detect-BCM6362-variants.patch
@@ -0,0 +1,46 @@
+From dc48adb13a99086d1f484d3379a918626c5b1658 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:33:28 +0100
+Subject: [PATCH 43/53] MIPS: BCM63XX: detect BCM6362 variants
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 8 ++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
+ 2 files changed, 11 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -384,6 +384,14 @@ void __init bcm63xx_cpu_init(void)
+ 	case BCM6362_CPU_ID:
+ 		bcm63xx_regs_base = bcm6362_regs_base;
+ 		bcm63xx_irqs = bcm6362_irqs;
++
++		if (varid == 1)
++			bcm63xx_cpu_variant = BCM6362_CPU_ID;
++		else if (varid == 2)
++			bcm63xx_cpu_variant = BCM6361_CPU_ID;
++		else
++			pr_warn("unknown BCM6362 variant: %x\n", varid);
++
+ 		break;
+ 	case BCM6368_CPU_ID:
+ 		bcm63xx_regs_base = bcm6368_regs_base;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -17,6 +17,7 @@
+ #define BCM6345_CPU_ID		0x6345
+ #define BCM6348_CPU_ID		0x6348
+ #define BCM6358_CPU_ID		0x6358
++#define BCM6361_CPU_ID		0x6361
+ #define BCM6362_CPU_ID		0x6362
+ #define BCM6368_CPU_ID		0x6368
+ 
+@@ -99,6 +100,8 @@ static inline u16 __pure bcm63xx_get_cpu
+ 	(bcm63xx_get_cpu_variant() == BCM6348_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6358() \
+ 	(bcm63xx_get_cpu_cariant() == BCM6358_CPU_ID)
++#define BCMCPU_VARIANT_IS_6361() \
++	(bcm63xx_get_cpu_variant() == BCM6361_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6362() \
+ 	(bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6368() \
diff --git a/target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-add-support-for-BCM6368-variants.patch b/target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-add-support-for-BCM6368-variants.patch
new file mode 100644
index 0000000..23f2ca4
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/334-MIPS-BCM63XX-add-support-for-BCM6368-variants.patch
@@ -0,0 +1,44 @@
+From 311b0246d51e09d13464e76abb0e231c855dd333 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:36:56 +0100
+Subject: [PATCH 44/53] MIPS: BCM63XX: add support for BCM6368 variants
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 4 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 3 +++
+ 2 files changed, 7 insertions(+)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -394,8 +394,12 @@ void __init bcm63xx_cpu_init(void)
+ 
+ 		break;
+ 	case BCM6368_CPU_ID:
++	case BCM6369_CPU_ID:
+ 		bcm63xx_regs_base = bcm6368_regs_base;
+ 		bcm63xx_irqs = bcm6368_irqs;
++
++		/* BCM6369 is a BCM6368 without xDSL, so treat it the same */
++		bcm63xx_cpu_id = BCM6368_CPU_ID;
+ 		break;
+ 	default:
+ 		panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -20,6 +20,7 @@
+ #define BCM6361_CPU_ID		0x6361
+ #define BCM6362_CPU_ID		0x6362
+ #define BCM6368_CPU_ID		0x6368
++#define BCM6369_CPU_ID		0x6369
+ 
+ void __init bcm63xx_cpu_init(void);
+ u32 bcm63xx_get_cpu_variant(void);
+@@ -106,6 +107,8 @@ static inline u16 __pure bcm63xx_get_cpu
+ 	(bcm63xx_get_cpu_variant() == BCM6362_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6368() \
+ 	(bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6369() \
++	(bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
+ 
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
diff --git a/target/linux/brcm63xx/patches-3.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch b/target/linux/brcm63xx/patches-3.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
new file mode 100644
index 0000000..3230add
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/335-MIPS-BCM63XX-fix-PCIe-memory-window-size.patch
@@ -0,0 +1,20 @@
+From f67f8134b4537c8bbafe7e1975edfe808b813997 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:05:54 +0100
+Subject: [PATCH 45/53] MIPS: BCM63XX: fix PCIe memory window size
+
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -41,7 +41,7 @@
+ 					BCM_CB_MEM_SIZE - 1)
+ 
+ #define BCM_PCIE_MEM_BASE_PA		0x10f00000
+-#define BCM_PCIE_MEM_SIZE		(16 * 1024 * 1024)
++#define BCM_PCIE_MEM_SIZE		(1 * 1024 * 1024)
+ #define BCM_PCIE_MEM_END_PA		(BCM_PCIE_MEM_BASE_PA +		\
+ 					BCM_PCIE_MEM_SIZE - 1)
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch b/target/linux/brcm63xx/patches-3.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
new file mode 100644
index 0000000..d6eb54d
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/336-MIPS-BCM63XX-dynamically-set-the-pcie-memory-windows.patch
@@ -0,0 +1,70 @@
+From aa05464973bc176478af462ca7c53a9239c651d4 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:13:06 +0100
+Subject: [PATCH 46/53] MIPS: BCM63XX: dynamically set the pcie memory windows
+
+Different SoCs use different memory windows (and sizes), so don't
+hardcode it.
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h |  8 ++++----
+ arch/mips/pci/pci-bcm63xx.c                     | 15 ++++++++++-----
+ 2 files changed, 14 insertions(+), 9 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -40,10 +40,10 @@
+ #define BCM_CB_MEM_END_PA		(BCM_CB_MEM_BASE_PA +		\
+ 					BCM_CB_MEM_SIZE - 1)
+ 
+-#define BCM_PCIE_MEM_BASE_PA		0x10f00000
+-#define BCM_PCIE_MEM_SIZE		(1 * 1024 * 1024)
+-#define BCM_PCIE_MEM_END_PA		(BCM_PCIE_MEM_BASE_PA +		\
+-					BCM_PCIE_MEM_SIZE - 1)
++#define BCM_PCIE_MEM_BASE_PA_6328	0x10f00000
++#define BCM_PCIE_MEM_SIZE_6328		(1 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_6328	(BCM_PCIE_MEM_BASE_PA_6328 +	\
++					BCM_PCIE_MEM_SIZE_6328 - 1)
+ 
+ /*
+  * Internal registers are accessed through KSEG3
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -77,8 +77,8 @@ struct pci_controller bcm63xx_cb_control
+ 
+ static struct resource bcm_pcie_mem_resource = {
+ 	.name	= "bcm63xx PCIe memory space",
+-	.start	= BCM_PCIE_MEM_BASE_PA,
+-	.end	= BCM_PCIE_MEM_END_PA,
++	.start	= 0,
++	.end	= 0,
+ 	.flags	= IORESOURCE_MEM,
+ };
+ 
+@@ -195,12 +195,12 @@ static int __init bcm63xx_register_pcie(
+ 	bcm_pcie_writel(val, PCIE_CONFIG2_REG);
+ 
+ 	/* set bar0 to little endian */
+-	val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
+-	val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
++	val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
++	val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
+ 	val |= BASEMASK_REMAP_EN;
+ 	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
+ 
+-	val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
++	val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
+ 	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
+ 
+ 	register_pci_controller(&bcm63xx_pcie_controller);
+@@ -334,6 +334,11 @@ static int __init bcm63xx_pci_init(void)
+ 	if (!bcm63xx_pci_enabled)
+ 		return -ENODEV;
+ 
++	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
++		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
++	}
++
+ 	switch (bcm63xx_get_cpu_id()) {
+ 	case BCM6328_CPU_ID:
+ 	case BCM6362_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch b/target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch
new file mode 100644
index 0000000..0ead82e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/337-MIPS-BCM63XX-widen-cpuid-field.patch
@@ -0,0 +1,56 @@
+From f1477f6e3551fd6beecfee5368fed1325dcd421f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 14:54:51 +0100
+Subject: [PATCH 47/53] MIPS: BCM63XX: widen cpuid field
+
+---
+ arch/mips/bcm63xx/cpu.c                          | 2 +-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 8 ++++----
+ 2 files changed, 5 insertions(+), 5 deletions(-)
+
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -24,7 +24,7 @@ EXPORT_SYMBOL(bcm63xx_regs_base);
+ const int *bcm63xx_irqs;
+ EXPORT_SYMBOL(bcm63xx_irqs);
+ 
+-u16 bcm63xx_cpu_id __read_mostly;
++u32 bcm63xx_cpu_id __read_mostly;
+ EXPORT_SYMBOL(bcm63xx_cpu_id);
+ 
+ static u32 bcm63xx_cpu_variant __read_mostly;
+@@ -127,7 +127,7 @@ unsigned int bcm63xx_get_memory_size(voi
+ 
+ static unsigned int detect_cpu_clock(void)
+ {
+-	u16 cpu_id = bcm63xx_get_cpu_id();
++	u32 cpu_id = bcm63xx_get_cpu_id();
+ 
+ 	switch (cpu_id) {
+ 	case BCM3368_CPU_ID:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -27,7 +27,7 @@ u32 bcm63xx_get_cpu_variant(void);
+ u8 bcm63xx_get_cpu_rev(void);
+ unsigned int bcm63xx_get_cpu_freq(void);
+ 
+-static inline u16 __pure __bcm63xx_get_cpu_id(const u16 cpu_id)
++static inline u32 __pure __bcm63xx_get_cpu_id(const u32 cpu_id)
+ {
+ 	switch (cpu_id) {
+ #ifdef CONFIG_BCM63XX_CPU_3368
+@@ -69,11 +69,11 @@ static inline u16 __pure __bcm63xx_get_c
+ 	return cpu_id;
+ }
+ 
+-extern u16 bcm63xx_cpu_id;
++extern u32 bcm63xx_cpu_id;
+ 
+-static inline u16 __pure bcm63xx_get_cpu_id(void)
++static inline u32 __pure bcm63xx_get_cpu_id(void)
+ {
+-	const u16 cpu_id = bcm63xx_cpu_id;
++	const u32 cpu_id = bcm63xx_cpu_id;
+ 
+ 	return __bcm63xx_get_cpu_id(cpu_id);
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch b/target/linux/brcm63xx/patches-3.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
new file mode 100644
index 0000000..9132e42
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/338-MIPS-BCM63XX-increase-number-of-IRQs.patch
@@ -0,0 +1,39 @@
+From 6f5658c845cf1f79213b1d20423a04967259fdaa Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Dec 2013 20:46:26 +0100
+Subject: [PATCH 48/53] MIPS: BCM63XX: increase number of IRQs
+
+Newer SoCs have 128 bit wide irq registers, thus 128 available internal
+interupts.
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 4 +++-
+ arch/mips/include/asm/mach-bcm63xx/irq.h         | 2 +-
+ 2 files changed, 4 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
+@@ -1,10 +1,12 @@
+ #ifndef BCM63XX_IRQ_H_
+ #define BCM63XX_IRQ_H_
+ 
++#include <irq.h>
+ #include <bcm63xx_cpu.h>
+ 
+ #define IRQ_INTERNAL_BASE		8
+-#define IRQ_EXTERNAL_BASE		100
++#define NR_INTERNAL_IRQS		128
++#define IRQ_EXTERNAL_BASE		(IRQ_INTERNAL_BASE + NR_INTERNAL_IRQS)
+ #define IRQ_EXT_0			(IRQ_EXTERNAL_BASE + 0)
+ #define IRQ_EXT_1			(IRQ_EXTERNAL_BASE + 1)
+ #define IRQ_EXT_2			(IRQ_EXTERNAL_BASE + 2)
+--- a/arch/mips/include/asm/mach-bcm63xx/irq.h
++++ b/arch/mips/include/asm/mach-bcm63xx/irq.h
+@@ -1,7 +1,7 @@
+ #ifndef __ASM_MACH_BCM63XX_IRQ_H
+ #define __ASM_MACH_BCM63XX_IRQ_H
+ 
+-#define NR_IRQS 128
++#define NR_IRQS 256
+ #define MIPS_CPU_IRQ_BASE 0
+ 
+ #endif
diff --git a/target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
new file mode 100644
index 0000000..a5bdbbd
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch
@@ -0,0 +1,769 @@
+From 98f63141190ac02c58b78d58f771bd263c61d756 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sat, 7 Dec 2013 17:14:17 +0100
+Subject: [PATCH 48/56] MIPS: BCM63XX: add support for BCM63268
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/Kconfig                         |   5 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
+ arch/mips/bcm63xx/clk.c                           |  25 ++++-
+ arch/mips/bcm63xx/cpu.c                           |  59 +++++++++-
+ arch/mips/bcm63xx/dev-flash.c                     |   6 +
+ arch/mips/bcm63xx/dev-spi.c                       |   4 +-
+ arch/mips/bcm63xx/irq.c                           |  20 +++-
+ arch/mips/bcm63xx/reset.c                         |  21 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 130 ++++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |   2 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  79 +++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
+ 12 files changed, 342 insertions(+), 12 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -60,6 +60,11 @@ config BCM63XX_CPU_6368
+ 	select HW_HAS_PCI
+ 	select BCM63XX_OHCI
+ 	select BCM63XX_EHCI
++
++config BCM63XX_CPU_63268
++	bool "support 63268 CPU"
++	select SYS_HAS_CPU_BMIPS4350
++	select HW_HAS_PCI
+ endmenu
+ 
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -825,7 +825,7 @@ void __init board_prom_init(void)
+ 	/* read base address of boot chip select (0)
+ 	 * 6328/6362 do not have MPI but boot from a fixed address
+ 	 */
+-	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
+ 		val = 0x18000000;
+ 	} else {
+ 		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -133,6 +133,8 @@ static void enetsw_set(struct clk *clk,
+ 				CKCTL_6368_SWPKT_USB_EN |
+ 				CKCTL_6368_SWPKT_SAR_EN,
+ 				enable);
++	else if (BCMCPU_IS_63268())
++		bcm_hwclock_set(CKCTL_63268_ROBOSW_EN, enable);
+ 	else
+ 		return;
+ 
+@@ -177,6 +179,8 @@ static void usbh_set(struct clk *clk, in
+ 		bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+ 	else if (BCMCPU_IS_6368())
+ 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
++	else if (BCMCPU_IS_63268())
++		bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
+ 	else
+ 		return;
+ 
+@@ -199,6 +203,8 @@ static void usbd_set(struct clk *clk, in
+ 		bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
+ 	else if (BCMCPU_IS_6368())
+ 		bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
++	else if (BCMCPU_IS_63268())
++		bcm_hwclock_set(CKCTL_63268_USBD_EN, enable);
+ 	else
+ 		return;
+ 
+@@ -225,9 +231,13 @@ static void spi_set(struct clk *clk, int
+ 		mask = CKCTL_6358_SPI_EN;
+ 	else if (BCMCPU_IS_6362())
+ 		mask = CKCTL_6362_SPI_EN;
+-	else
+-		/* BCMCPU_IS_6368 */
++	else if (BCMCPU_IS_6368())
+ 		mask = CKCTL_6368_SPI_EN;
++	else if (BCMCPU_IS_63268())
++		mask = CKCTL_63268_SPI_EN;
++	else
++		return;
++
+ 	bcm_hwclock_set(mask, enable);
+ }
+ 
+@@ -246,6 +256,8 @@ static void hsspi_set(struct clk *clk, i
+ 		mask = CKCTL_6328_HSSPI_EN;
+ 	else if (BCMCPU_IS_6362())
+ 		mask = CKCTL_6362_HSSPI_EN;
++	else if (BCMCPU_IS_63268())
++		mask = CKCTL_63268_HSSPI_EN;
+ 	else
+ 		return;
+ 
+@@ -307,6 +319,8 @@ static void pcie_set(struct clk *clk, in
+ 		bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
+ 	else if (BCMCPU_IS_6362())
+ 		bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
++	else if (BCMCPU_IS_63268())
++		bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
+ }
+ 
+ static struct clk clk_pcie = {
+@@ -386,9 +400,11 @@ struct clk *clk_get(struct device *dev,
+ 		return &clk_periph;
+ 	if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
+ 		return &clk_pcm;
+-	if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
++	if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) &&
++	    !strcmp(id, "ipsec"))
+ 		return &clk_ipsec;
+-	if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
++	if ((BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
++	    !strcmp(id, "pcie"))
+ 		return &clk_pcie;
+ 	return ERR_PTR(-ENOENT);
+ }
+@@ -411,6 +427,7 @@ static int __init bcm63xx_clk_init(void)
+ 		clk_hsspi.rate = HSSPI_PLL_HZ_6328;
+ 		break;
+ 	case BCM6362_CPU_ID:
++	case BCM63268_CPU_ID:
+ 		clk_hsspi.rate = HSSPI_PLL_HZ_6362;
+ 		break;
+ 	}
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -101,6 +101,15 @@ static const int bcm6368_irqs[] = {
+ 
+ };
+ 
++static const unsigned long bcm63268_regs_base[] = {
++	__GEN_CPU_REGS_TABLE(63268)
++};
++
++static const int bcm63268_irqs[] = {
++	__GEN_CPU_IRQ_TABLE(63268)
++
++};
++
+ u32 bcm63xx_get_cpu_variant(void)
+ {
+ 	return bcm63xx_cpu_variant;
+@@ -253,6 +262,27 @@ static unsigned int detect_cpu_clock(voi
+ 
+ 		return (((64 * 1000000) / p1) * p2 * ndiv) / m1;
+ 	}
++	case BCM63268_CPU_ID:
++	{
++		unsigned int tmp, mips_pll_fcvo;
++
++		tmp = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++		mips_pll_fcvo = (tmp & STRAPBUS_63268_FCVO_MASK) >>
++				STRAPBUS_63268_FCVO_SHIFT;
++		switch (mips_pll_fcvo) {
++		case 0x3:
++		case 0xe:
++			return 320000000;
++		case 0xa:
++			return 333000000;
++		case 0x2:
++		case 0xb:
++		case 0xf:
++			return 400000000;
++		default:
++			return 0;
++		}
++	}
+ 
+ 	default:
+ 		panic("Failed to detect clock for CPU with id=%04X\n", cpu_id);
+@@ -267,7 +297,7 @@ static unsigned int detect_memory_size(v
+ 	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+ 	u32 val;
+ 
+-	if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
++	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
+ 		return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+ 
+ 	if (BCMCPU_IS_6345()) {
+@@ -306,6 +336,7 @@ void __init bcm63xx_cpu_init(void)
+ 	struct cpuinfo_mips *c = &current_cpu_data;
+ 	unsigned int cpu = smp_processor_id();
+ 	u32 chipid_reg;
++	bool long_chipid = false;
+ 	u8 __maybe_unused varid = 0;
+ 
+ 	/* soc registers location depends on cpu type */
+@@ -327,6 +358,9 @@ void __init bcm63xx_cpu_init(void)
+ 		case 0x10:
+ 			chipid_reg = BCM_6345_PERF_BASE;
+ 			break;
++		case 0x80:
++			long_chipid = true;
++			/* fall-through */
+ 		default:
+ 			chipid_reg = BCM_6368_PERF_BASE;
+ 			break;
+@@ -334,6 +368,7 @@ void __init bcm63xx_cpu_init(void)
+ 		break;
+ 	}
+ 
++
+ 	/*
+ 	 * really early to panic, but delaying panic would not help since we
+ 	 * will never get any working console
+@@ -343,10 +378,17 @@ void __init bcm63xx_cpu_init(void)
+ 
+ 	/* read out CPU type */
+ 	tmp = bcm_readl(chipid_reg);
+-	bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
+-	bcm63xx_cpu_variant = bcm63xx_cpu_id;
++
++	if (long_chipid) {
++		bcm63xx_cpu_id = tmp & REV_LONG_CHIPID_MASK;
++		bcm63xx_cpu_id >>= REV_LONG_CHIPID_SHIFT;
++	} else {
++		bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
++		varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
++	}
++
+ 	bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
+-	varid = (tmp & REV_VARID_MASK) >> REV_VARID_SHIFT;
++	bcm63xx_cpu_variant = bcm63xx_cpu_id;
+ 
+ 	switch (bcm63xx_cpu_id) {
+ 	case BCM3368_CPU_ID:
+@@ -401,6 +443,15 @@ void __init bcm63xx_cpu_init(void)
+ 		/* BCM6369 is a BCM6368 without xDSL, so treat it the same */
+ 		bcm63xx_cpu_id = BCM6368_CPU_ID;
+ 		break;
++	case BCM63168_CPU_ID:
++	case BCM63169_CPU_ID:
++	case BCM63268_CPU_ID:
++	case BCM63269_CPU_ID:
++		bcm63xx_regs_base = bcm63268_regs_base;
++		bcm63xx_irqs = bcm63268_irqs;
++
++		bcm63xx_cpu_id = BCM63268_CPU_ID;
++		break;
+ 	default:
+ 		panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
+ 		break;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -94,6 +94,12 @@ static int __init bcm63xx_detect_flash_t
+ 		case STRAPBUS_6368_BOOT_SEL_PARALLEL:
+ 			return BCM63XX_FLASH_TYPE_PARALLEL;
+ 		}
++	case BCM63268_CPU_ID:
++		val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++		if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
++			return BCM63XX_FLASH_TYPE_SERIAL;
++		else
++			return BCM63XX_FLASH_TYPE_NAND;
+ 	default:
+ 		return -EINVAL;
+ 	}
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -37,7 +37,7 @@ static __init void bcm63xx_spi_regs_init
+ 	if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
+ 		bcm63xx_regs_spi = bcm6348_regs_spi;
+ 	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() ||
+-		BCMCPU_IS_6362() || BCMCPU_IS_6368())
++		BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268())
+ 		bcm63xx_regs_spi = bcm6358_regs_spi;
+ }
+ 
+@@ -85,7 +85,7 @@ int __init bcm63xx_spi_register(void)
+ 	}
+ 
+ 	if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
+-		BCMCPU_IS_6368()) {
++		BCMCPU_IS_6368() || BCMCPU_IS_63268()) {
+ 		spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
+ 		spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
+ 		spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -158,6 +158,7 @@ static void __internal_irq_unmask_##widt
+ 
+ BUILD_IPIC_INTERNAL(32);
+ BUILD_IPIC_INTERNAL(64);
++BUILD_IPIC_INTERNAL(128);
+ 
+ asmlinkage void plat_irq_dispatch(void)
+ {
+@@ -343,6 +344,7 @@ static int bcm63xx_external_irq_set_type
+ 	case BCM6358_CPU_ID:
+ 	case BCM6362_CPU_ID:
+ 	case BCM6368_CPU_ID:
++	case BCM63268_CPU_ID:
+ 		if (levelsense)
+ 			reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+ 		else
+@@ -515,6 +517,18 @@ static void bcm63xx_init_irq(void)
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6368;
+ 		ext_irq_cfg_reg2 = PERF_EXTIRQ_CFG_REG2_6368;
+ 		break;
++	case BCM63268_CPU_ID:
++		irq_stat_addr[0] += PERF_IRQSTAT_63268_REG(0);
++		irq_mask_addr[0] += PERF_IRQMASK_63268_REG(0);
++		irq_stat_addr[1] += PERF_IRQSTAT_63268_REG(1);
++		irq_mask_addr[1] += PERF_IRQMASK_63268_REG(1);
++		irq_bits = 128;
++		ext_irq_count = 4;
++		is_ext_irq_cascaded = 1;
++		ext_irq_start = BCM_63268_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++		ext_irq_end = BCM_63268_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_63268;
++		break;
+ 	default:
+ 		BUG();
+ 	}
+@@ -523,10 +537,14 @@ static void bcm63xx_init_irq(void)
+ 		dispatch_internal = __dispatch_internal_32;
+ 		internal_irq_mask = __internal_irq_mask_32;
+ 		internal_irq_unmask = __internal_irq_unmask_32;
+-	} else {
++	} else if (irq_bits == 64) {
+ 		dispatch_internal = __dispatch_internal_64;
+ 		internal_irq_mask = __internal_irq_mask_64;
+ 		internal_irq_unmask = __internal_irq_unmask_64;
++	} else {
++		dispatch_internal = __dispatch_internal_128;
++		internal_irq_mask = __internal_irq_mask_128;
++		internal_irq_unmask = __internal_irq_unmask_128;
+ 	}
+ }
+ 
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -125,6 +125,20 @@
+ #define BCM6368_RESET_PCIE	0
+ #define BCM6368_RESET_PCIE_EXT	0
+ 
++#define BCM63268_RESET_SPI	SOFTRESET_63268_SPI_MASK
++#define BCM63268_RESET_ENET	0
++#define BCM63268_RESET_USBH	SOFTRESET_63268_USBH_MASK
++#define BCM63268_RESET_USBD	SOFTRESET_63268_USBS_MASK
++#define BCM63268_RESET_DSL	0
++#define BCM63268_RESET_SAR	SOFTRESET_63268_SAR_MASK
++#define BCM63268_RESET_EPHY	0
++#define BCM63268_RESET_ENETSW	SOFTRESET_63268_ENETSW_MASK
++#define BCM63268_RESET_PCM	SOFTRESET_63268_PCM_MASK
++#define BCM63268_RESET_MPI	0
++#define BCM63268_RESET_PCIE	(SOFTRESET_63268_PCIE_MASK | \
++				 SOFTRESET_63268_PCIE_CORE_MASK)
++#define BCM63268_RESET_PCIE_EXT	SOFTRESET_63268_PCIE_EXT_MASK
++
+ /*
+  * core reset bits
+  */
+@@ -156,6 +170,10 @@ static const u32 bcm6368_reset_bits[] =
+ 	__GEN_RESET_BITS_TABLE(6368)
+ };
+ 
++static const u32 bcm63268_reset_bits[] = {
++	__GEN_RESET_BITS_TABLE(63268)
++};
++
+ const u32 *bcm63xx_reset_bits;
+ static int reset_reg;
+ 
+@@ -182,6 +200,9 @@ static int __init bcm63xx_reset_bits_ini
+ 	} else if (BCMCPU_IS_6368()) {
+ 		reset_reg = PERF_SOFTRESET_6368_REG;
+ 		bcm63xx_reset_bits = bcm6368_reset_bits;
++	} else if (BCMCPU_IS_63268()) {
++		reset_reg = PERF_SOFTRESET_63268_REG;
++		bcm63xx_reset_bits = bcm63268_reset_bits;
+ 	}
+ 
+ 	return 0;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -21,6 +21,10 @@
+ #define BCM6362_CPU_ID		0x6362
+ #define BCM6368_CPU_ID		0x6368
+ #define BCM6369_CPU_ID		0x6369
++#define BCM63168_CPU_ID		0x63168
++#define BCM63169_CPU_ID		0x63169
++#define BCM63268_CPU_ID		0x63268
++#define BCM63269_CPU_ID		0x63269
+ 
+ void __init bcm63xx_cpu_init(void);
+ u32 bcm63xx_get_cpu_variant(void);
+@@ -61,6 +65,10 @@ static inline u32 __pure __bcm63xx_get_c
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ 		case BCM6368_CPU_ID:
+ #endif
++
++#ifdef CONFIG_BCM63XX_CPU_63268
++		case BCM63268_CPU_ID:
++#endif
+ 		break;
+ 	default:
+ 		unreachable();
+@@ -86,6 +94,7 @@ static inline u32 __pure bcm63xx_get_cpu
+ #define BCMCPU_IS_6358()	(bcm63xx_get_cpu_id() == BCM6358_CPU_ID)
+ #define BCMCPU_IS_6362()	(bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
+ #define BCMCPU_IS_6368()	(bcm63xx_get_cpu_id() == BCM6368_CPU_ID)
++#define BCMCPU_IS_63268()	(bcm63xx_get_cpu_id() == BCM63268_CPU_ID)
+ 
+ #define BCMCPU_VARIANT_IS_3368() \
+ 	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
+@@ -109,6 +118,14 @@ static inline u32 __pure bcm63xx_get_cpu
+ 	(bcm63xx_get_cpu_variant() == BCM6368_CPU_ID)
+ #define BCMCPU_VARIANT_IS_6369() \
+ 	(bcm63xx_get_cpu_variant() == BCM6369_CPU_ID)
++#define BCMCPU_VARIANT_IS_63168() \
++	(bcm63xx_get_cpu_variant() == BCM63168_CPU_ID)
++#define BCMCPU_VARIANT_IS_63169() \
++	(bcm63xx_get_cpu_variant() == BCM63169_CPU_ID)
++#define BCMCPU_VARIANT_IS_63268() \
++	(bcm63xx_get_cpu_variant() == BCM63268_CPU_ID)
++#define BCMCPU_VARIANT_IS_63269() \
++	(bcm63xx_get_cpu_variant() == BCM63269_CPU_ID)
+ 
+ /*
+  * While registers sets are (mostly) the same across 63xx CPU, base
+@@ -573,6 +590,52 @@ enum bcm63xx_regs_set {
+ #define BCM_6368_RNG_BASE		(0xb0004180)
+ #define BCM_6368_MISC_BASE		(0xdeadbeef)
+ 
++/*
++ * 63268 register sets base address
++ */
++#define BCM_63268_DSL_LMEM_BASE		(0xdeadbeef)
++#define BCM_63268_PERF_BASE		(0xb0000000)
++#define BCM_63268_TIMER_BASE		(0xb0000080)
++#define BCM_63268_WDT_BASE		(0xb000009c)
++#define BCM_63268_UART0_BASE		(0xb0000180)
++#define BCM_63268_UART1_BASE		(0xb00001a0)
++#define BCM_63268_GPIO_BASE		(0xb00000c0)
++#define BCM_63268_SPI_BASE		(0xb0000800)
++#define BCM_63268_HSSPI_BASE		(0xb0001000)
++#define BCM_63268_UDC0_BASE		(0xdeadbeef)
++#define BCM_63268_USBDMA_BASE		(0xb000c800)
++#define BCM_63268_OHCI0_BASE		(0xb0002600)
++#define BCM_63268_OHCI_PRIV_BASE	(0xdeadbeef)
++#define BCM_63268_USBH_PRIV_BASE	(0xb0002700)
++#define BCM_63268_USBD_BASE		(0xb0002400)
++#define BCM_63268_MPI_BASE		(0xdeadbeef)
++#define BCM_63268_PCMCIA_BASE		(0xdeadbeef)
++#define BCM_63268_PCIE_BASE		(0xb06e0000)
++#define BCM_63268_SDRAM_REGS_BASE	(0xdeadbeef)
++#define BCM_63268_DSL_BASE		(0xdeadbeef)
++#define BCM_63268_UBUS_BASE		(0xdeadbeef)
++#define BCM_63268_ENET0_BASE		(0xdeadbeef)
++#define BCM_63268_ENET1_BASE		(0xdeadbeef)
++#define BCM_63268_ENETDMA_BASE		(0xb000d800)
++#define BCM_63268_ENETDMAC_BASE		(0xb000da00)
++#define BCM_63268_ENETDMAS_BASE		(0xb000dc00)
++#define BCM_63268_ENETSW_BASE		(0xb0700000)
++#define BCM_63268_EHCI0_BASE		(0xb0002500)
++#define BCM_63268_SDRAM_BASE		(0xdeadbeef)
++#define BCM_63268_MEMC_BASE		(0xdeadbeef)
++#define BCM_63268_DDR_BASE		(0xb0003000)
++#define BCM_63268_M2M_BASE		(0xdeadbeef)
++#define BCM_63268_ATM_BASE		(0xdeadbeef)
++#define BCM_63268_XTM_BASE		(0xb0007000)
++#define BCM_63268_XTMDMA_BASE		(0xb000b800)
++#define BCM_63268_XTMDMAC_BASE		(0xdeadbeef)
++#define BCM_63268_XTMDMAS_BASE		(0xdeadbeef)
++#define BCM_63268_PCM_BASE		(0xb000b000)
++#define BCM_63268_PCMDMA_BASE		(0xb000b800)
++#define BCM_63268_PCMDMAC_BASE		(0xdeadbeef)
++#define BCM_63268_PCMDMAS_BASE		(0xdeadbeef)
++#define BCM_63268_RNG_BASE		(0xdeadbeef)
++#define BCM_63268_MISC_BASE		(0xb0001800)
+ 
+ extern const unsigned long *bcm63xx_regs_base;
+ 
+@@ -1084,6 +1147,73 @@ enum bcm63xx_irq {
+ #define BCM_6368_EXT_IRQ4		(IRQ_INTERNAL_BASE + 24)
+ #define BCM_6368_EXT_IRQ5		(IRQ_INTERNAL_BASE + 25)
+ 
++/*
++ * 63268 irqs
++ */
++#define BCM_63268_HIGH_IRQ_BASE		(IRQ_INTERNAL_BASE + 32)
++#define BCM_63268_VERY_HIGH_IRQ_BASE	(BCM_63268_HIGH_IRQ_BASE + 32)
++
++#define BCM_63268_TIMER_IRQ		(IRQ_INTERNAL_BASE + 0)
++#define BCM_63268_SPI_IRQ		(BCM_63268_VERY_HIGH_IRQ_BASE + 16)
++#define BCM_63268_UART0_IRQ		(IRQ_INTERNAL_BASE + 5)
++#define BCM_63268_UART1_IRQ		(BCM_63268_HIGH_IRQ_BASE + 2)
++#define BCM_63268_DSL_IRQ		(IRQ_INTERNAL_BASE + 23)
++#define BCM_63268_UDC0_IRQ		0
++#define BCM_63268_ENET0_IRQ		0
++#define BCM_63268_ENET1_IRQ		0
++#define BCM_63268_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 13)
++#define BCM_63268_HSSPI_IRQ		(IRQ_INTERNAL_BASE + 6)
++#define BCM_63268_OHCI0_IRQ		(IRQ_INTERNAL_BASE + 9)
++#define BCM_63268_EHCI0_IRQ		(IRQ_INTERNAL_BASE + 10)
++#define BCM_63268_USBD_IRQ		(IRQ_INTERNAL_BASE + 11)
++#define BCM_63268_USBD_RXDMA0_IRQ	(IRQ_INTERNAL_BASE + 19)
++#define BCM_63268_USBD_TXDMA0_IRQ	(BCM_63268_HIGH_IRQ_BASE + 4)
++#define BCM_63268_USBD_RXDMA1_IRQ	(IRQ_INTERNAL_BASE + 20)
++#define BCM_63268_USBD_TXDMA1_IRQ	(BCM_63268_HIGH_IRQ_BASE + 5)
++#define BCM_63268_USBD_RXDMA2_IRQ	(IRQ_INTERNAL_BASE + 21)
++#define BCM_63268_USBD_TXDMA2_IRQ	(BCM_63268_HIGH_IRQ_BASE + 6)
++#define BCM_63268_PCMCIA_IRQ		0
++#define BCM_63268_ENET0_RXDMA_IRQ	0
++#define BCM_63268_ENET0_TXDMA_IRQ	0
++#define BCM_63268_ENET1_RXDMA_IRQ	0
++#define BCM_63268_ENET1_TXDMA_IRQ	0
++#define BCM_63268_PCI_IRQ		(BCM_63268_HIGH_IRQ_BASE + 8)
++#define BCM_63268_ATM_IRQ		0
++#define BCM_63268_ENETSW_RXDMA0_IRQ	(IRQ_INTERNAL_BASE + 1)
++#define BCM_63268_ENETSW_RXDMA1_IRQ	(IRQ_INTERNAL_BASE + 2)
++#define BCM_63268_ENETSW_RXDMA2_IRQ	(IRQ_INTERNAL_BASE + 3)
++#define BCM_63268_ENETSW_RXDMA3_IRQ	(IRQ_INTERNAL_BASE + 4)
++#define BCM_63268_ENETSW_TXDMA0_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 0)
++#define BCM_63268_ENETSW_TXDMA1_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 1)
++#define BCM_63268_ENETSW_TXDMA2_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 2)
++#define BCM_63268_ENETSW_TXDMA3_IRQ	(BCM_63268_VERY_HIGH_IRQ_BASE + 3)
++#define BCM_63268_XTM_IRQ		(BCM_63268_HIGH_IRQ_BASE + 17)
++#define BCM_63268_XTM_DMA0_IRQ		(IRQ_INTERNAL_BASE + 26)
++
++#define BCM_63268_RING_OSC_IRQ		(BCM_63268_HIGH_IRQ_BASE + 20)
++#define BCM_63268_WLAN_GPIO_IRQ		(BCM_63268_HIGH_IRQ_BASE + 3)
++#define BCM_63268_WLAN_IRQ		(IRQ_INTERNAL_BASE + 7)
++#define BCM_63268_IPSEC_IRQ		(IRQ_INTERNAL_BASE + 8)
++#define BCM_63268_NAND_IRQ		(BCM_63268_HIGH_IRQ_BASE + 18)
++#define BCM_63268_PCM_IRQ		(IRQ_INTERNAL_BASE + 13)
++#define BCM_63268_DG_IRQ		(IRQ_INTERNAL_BASE + 15)
++#define BCM_63268_EPHY_ENERGY0_IRQ	(IRQ_INTERNAL_BASE + 16)
++#define BCM_63268_EPHY_ENERGY1_IRQ	(IRQ_INTERNAL_BASE + 17)
++#define BCM_63268_EPHY_ENERGY2_IRQ	(IRQ_INTERNAL_BASE + 18)
++#define BCM_63268_EPHY_ENERGY3_IRQ	(IRQ_INTERNAL_BASE + 19)
++#define BCM_63268_IPSEC_DMA0_IRQ	(IRQ_INTERNAL_BASE + 22)
++#define BCM_63268_IPSEC_DMA1_IRQ	(BCM_63268_HIGH_IRQ_BASE + 7)
++#define BCM_63268_FAP0_IRQ		(IRQ_INTERNAL_BASE + 24)
++#define BCM_63268_FAP1_IRQ		(IRQ_INTERNAL_BASE + 25)
++#define BCM_63268_PCM_DMA0_IRQ		(BCM_63268_HIGH_IRQ_BASE + 10)
++#define BCM_63268_PCM_DMA1_IRQ		(BCM_63268_HIGH_IRQ_BASE + 11)
++#define BCM_63268_DECT0_IRQ		(BCM_63268_HIGH_IRQ_BASE + 0)
++#define BCM_63268_DECT1_IRQ		(BCM_63268_HIGH_IRQ_BASE + 1)
++#define BCM_63268_EXT_IRQ0		(BCM_63268_HIGH_IRQ_BASE + 12)
++#define BCM_63268_EXT_IRQ1		(BCM_63268_HIGH_IRQ_BASE + 13)
++#define BCM_63268_EXT_IRQ2		(BCM_63268_HIGH_IRQ_BASE + 14)
++#define BCM_63268_EXT_IRQ3		(BCM_63268_HIGH_IRQ_BASE + 15)
++
+ extern const int *bcm63xx_irqs;
+ 
+ #define __GEN_CPU_IRQ_TABLE(__cpu)					\
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -22,6 +22,8 @@ static inline unsigned long bcm63xx_gpio
+ 		return 48;
+ 	case BCM6368_CPU_ID:
+ 		return 38;
++	case BCM63268_CPU_ID:
++		return 52;
+ 	case BCM6348_CPU_ID:
+ 	default:
+ 		return 37;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -9,6 +9,8 @@
+ #define PERF_REV_REG			0x0
+ #define REV_CHIPID_SHIFT		16
+ #define REV_CHIPID_MASK			(0xffff << REV_CHIPID_SHIFT)
++#define REV_LONG_CHIPID_SHIFT		12
++#define REV_LONG_CHIPID_MASK		(0xfffff << REV_LONG_CHIPID_SHIFT)
+ #define REV_VARID_SHIFT			8
+ #define REV_VARID_MASK			(0xf << REV_VARID_SHIFT)
+ #define REV_REVID_SHIFT			0
+@@ -211,6 +213,52 @@
+ 					CKCTL_6368_NAND_EN |		\
+ 					CKCTL_6368_IPSEC_EN)
+ 
++#define CKCTL_63268_DISABLE_GLESS	(1 << 0)
++#define CKCTL_63268_VDSL_QPROC_EN	(1 << 1)
++#define CKCTL_63268_VDSL_AFE_EN		(1 << 2)
++#define CKCTL_63268_VDSL_EN		(1 << 3)
++#define CKCTL_63268_MIPS_EN		(1 << 4)
++#define CKCTL_63268_WLAN_OCP_EN		(1 << 5)
++#define CKCTL_63268_DECT_EN		(1 << 6)
++#define CKCTL_63268_FAP0_EN		(1 << 7)
++#define CKCTL_63268_FAP1_EN		(1 << 8)
++#define CKCTL_63268_SAR_EN		(1 << 9)
++#define CKCTL_63268_ROBOSW_EN		(1 << 10)
++#define CKCTL_63268_PCM_EN		(1 << 11)
++#define CKCTL_63268_USBD_EN		(1 << 12)
++#define CKCTL_63268_USBH_EN		(1 << 13)
++#define CKCTL_63268_IPSEC_EN		(1 << 14)
++#define CKCTL_63268_SPI_EN		(1 << 15)
++#define CKCTL_63268_HSSPI_EN		(1 << 16)
++#define CKCTL_63268_PCIE_EN		(1 << 17)
++#define CKCTL_63268_PHYMIPS_EN		(1 << 18)
++#define CKCTL_63268_GMAC_EN		(1 << 19)
++#define CKCTL_63268_NAND_EN		(1 << 20)
++#define CKCTL_63268_TBUS_EN		(1 << 27)
++#define CKCTL_63268_ROBOSW250_EN	(1 << 31)
++
++#define CKCTL_63268_ALL_SAFE_EN		(CKCTL_63268_VDSL_QPROC_EN |	\
++					CKCTL_63268_VDSL_AFE_EN |	\
++					CKCTL_63268_VDSL_EN |		\
++					CKCTL_63268_WLAN_OCP_EN |	\
++					CKCTL_63268_DECT_EN |		\
++					CKCTL_63268_FAP0_EN |		\
++					CKCTL_63268_FAP1_EN |		\
++					CKCTL_63268_SAR_EN |		\
++					CKCTL_63268_ROBOSW_EN |		\
++					CKCTL_63268_PCM_EN |		\
++					CKCTL_63268_USBD_EN |		\
++					CKCTL_63268_USBH_EN |		\
++					CKCTL_63268_IPSEC_EN |		\
++					CKCTL_63268_SPI_EN |		\
++					CKCTL_63268_HSSPI_EN |		\
++					CKCTL_63268_PCIE_EN |		\
++					CKCTL_63268_PHYMIPS_EN |	\
++					CKCTL_63268_GMAC_EN |		\
++					CKCTL_63268_NAND_EN |		\
++					CKCTL_63268_TBUS_EN |		\
++					CKCTL_63268_ROBOSW250_EN)
++
+ /* System PLL Control register	*/
+ #define PERF_SYS_PLL_CTL_REG		0x8
+ #define SYS_PLL_SOFT_RESET		0x1
+@@ -224,6 +272,7 @@
+ #define PERF_IRQMASK_6358_REG(x)	(0xc + (x) * 0x2c)
+ #define PERF_IRQMASK_6362_REG(x)	(0x20 + (x) * 0x10)
+ #define PERF_IRQMASK_6368_REG(x)	(0x20 + (x) * 0x10)
++#define PERF_IRQMASK_63268_REG(x)	(0x20 + (x) * 0x20)
+ 
+ /* Interrupt Status register */
+ #define PERF_IRQSTAT_3368_REG		0x10
+@@ -234,6 +283,7 @@
+ #define PERF_IRQSTAT_6358_REG(x)	(0x10 + (x) * 0x2c)
+ #define PERF_IRQSTAT_6362_REG(x)	(0x28 + (x) * 0x10)
+ #define PERF_IRQSTAT_6368_REG(x)	(0x28 + (x) * 0x10)
++#define PERF_IRQSTAT_63268_REG(x)	(0x30 + (x) * 0x20)
+ 
+ /* External Interrupt Configuration register */
+ #define PERF_EXTIRQ_CFG_REG_3368	0x14
+@@ -244,6 +294,7 @@
+ #define PERF_EXTIRQ_CFG_REG_6358	0x14
+ #define PERF_EXTIRQ_CFG_REG_6362	0x18
+ #define PERF_EXTIRQ_CFG_REG_6368	0x18
++#define PERF_EXTIRQ_CFG_REG_63268	0x18
+ 
+ #define PERF_EXTIRQ_CFG_REG2_6368	0x1c
+ 
+@@ -273,6 +324,7 @@
+ #define PERF_SOFTRESET_6358_REG		0x34
+ #define PERF_SOFTRESET_6362_REG		0x10
+ #define PERF_SOFTRESET_6368_REG		0x10
++#define PERF_SOFTRESET_63268_REG	0x10
+ 
+ #define SOFTRESET_3368_SPI_MASK		(1 << 0)
+ #define SOFTRESET_3368_ENET_MASK	(1 << 2)
+@@ -366,6 +418,26 @@
+ #define SOFTRESET_6368_USBH_MASK	(1 << 12)
+ #define SOFTRESET_6368_PCM_MASK		(1 << 13)
+ 
++#define SOFTRESET_63268_SPI_MASK	(1 << 0)
++#define SOFTRESET_63268_IPSEC_MASK	(1 << 1)
++#define SOFTRESET_63268_EPHY_MASK	(1 << 2)
++#define SOFTRESET_63268_SAR_MASK	(1 << 3)
++#define SOFTRESET_63268_ENETSW_MASK	(1 << 4)
++#define SOFTRESET_63268_USBS_MASK	(1 << 5)
++#define SOFTRESET_63268_USBH_MASK	(1 << 6)
++#define SOFTRESET_63268_PCM_MASK	(1 << 7)
++#define SOFTRESET_63268_PCIE_CORE_MASK	(1 << 8)
++#define SOFTRESET_63268_PCIE_MASK	(1 << 9)
++#define SOFTRESET_63268_PCIE_EXT_MASK	(1 << 10)
++#define SOFTRESET_63268_WLAN_SHIM_MASK	(1 << 11)
++#define SOFTRESET_63268_DDR_PHY_MASK	(1 << 12)
++#define SOFTRESET_63268_FAP0_MASK	(1 << 13)
++#define SOFTRESET_63268_WLAN_UBUS_MASK	(1 << 14)
++#define SOFTRESET_63268_DECT_MASK	(1 << 15)
++#define SOFTRESET_63268_FAP1_MASK	(1 << 16)
++#define SOFTRESET_63268_PCIE_HARD_MASK	(1 << 17)
++#define SOFTRESET_63268_GPHY_MASK	(1 << 18)
++
+ /* MIPS PLL control register */
+ #define PERF_MIPSPLLCTL_REG		0x34
+ #define MIPSPLLCTL_N1_SHIFT		20
+@@ -1379,6 +1451,13 @@
+ #define STRAPBUS_6362_BOOT_SEL_SERIAL	(1 << 15)
+ #define STRAPBUS_6362_BOOT_SEL_NAND	(0 << 15)
+ 
++#define MISC_STRAPBUS_63268_REG		0x14
++#define STRAPBUS_63268_HSSPI_CLK_FAST	(1 << 9)
++#define STRAPBUS_63268_BOOT_SEL_SERIAL	(1 << 11)
++#define STRAPBUS_63268_BOOT_SEL_NAND	(0 << 11)
++#define STRAPBUS_63268_FCVO_SHIFT	21
++#define STRAPBUS_63268_FCVO_MASK	(0xf << STRAPBUS_63268_FCVO_SHIFT)
++
+ #define MISC_STRAPBUS_6328_REG		0x240
+ #define STRAPBUS_6328_FCVO_SHIFT	7
+ #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
+--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+@@ -25,6 +25,7 @@ static inline int is_bcm63xx_internal_re
+ 	case BCM6328_CPU_ID:
+ 	case BCM6362_CPU_ID:
+ 	case BCM6368_CPU_ID:
++	case BCM63268_CPU_ID:
+ 		if (offset >= 0xb0000000 && offset < 0xb1000000)
+ 			return 1;
+ 		break;
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ b/arch/mips/bcm63xx/dev-hsspi.c
+@@ -35,7 +35,7 @@ static struct platform_device bcm63xx_hs
+ 
+ int __init bcm63xx_hsspi_register(void)
+ {
+-	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
++	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
+ 		return -ENODEV;
+ 
+ 	spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -176,7 +176,8 @@ static int __init register_shared(void)
+ 	else
+ 		shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+ 
+-	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
++	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
++		BCMCPU_IS_63268())
+ 		chan_count = 32;
+ 	else if (BCMCPU_IS_6345())
+ 		chan_count = 8;
+@@ -276,7 +277,8 @@ bcm63xx_enetsw_register(const struct bcm
+ {
+ 	int ret;
+ 
+-	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
++		!BCMCPU_IS_63268())
+ 		return -ENODEV;
+ 
+ 	ret = register_shared();
+@@ -295,8 +297,11 @@ bcm63xx_enetsw_register(const struct bcm
+ 
+ 	if (BCMCPU_IS_6328())
+ 		enetsw_pd.num_ports = ENETSW_PORTS_6328;
+-	else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
++	else if (BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
++		 BCMCPU_VARIANT_IS_63168() || BCMCPU_VARIANT_IS_63169())
+ 		enetsw_pd.num_ports = ENETSW_PORTS_6368;
++	else if (BCMCPU_VARIANT_IS_63268() ||  BCMCPU_VARIANT_IS_63269())
++		enetsw_pd.num_ports = ENETSW_PORTS_63268;
+ 
+ 	enetsw_pd.dma_has_sram = true;
+ 	enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+@@ -62,6 +62,7 @@ struct bcm63xx_enet_platform_data {
+ #define ENETSW_MAX_PORT	8
+ #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
+ #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
++#define ENETSW_PORTS_63268 8 /* 3 FE PHY + 1 GE PHY + 4 RGMII */
+ 
+ #define ENETSW_RGMII_PORT0	4
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-3.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
new file mode 100644
index 0000000..4e8a090
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/340-MIPS-BCM63XX-add-pcie-support-for-BCM63268.patch
@@ -0,0 +1,55 @@
+From 5c290c81dbdb4433600593fe80c88eb4af86e791 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 03:22:40 +0100
+Subject: [PATCH 50/53] MIPS: BCM63XX: add pcie support for BCM63268
+
+---
+ arch/mips/bcm63xx/reset.c                       | 3 ++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 5 +++++
+ arch/mips/pci/pci-bcm63xx.c                     | 4 ++++
+ 3 files changed, 11 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -136,7 +136,8 @@
+ #define BCM63268_RESET_PCM	SOFTRESET_63268_PCM_MASK
+ #define BCM63268_RESET_MPI	0
+ #define BCM63268_RESET_PCIE	(SOFTRESET_63268_PCIE_MASK | \
+-				 SOFTRESET_63268_PCIE_CORE_MASK)
++				 SOFTRESET_63268_PCIE_CORE_MASK | \
++				 SOFTRESET_63268_PCIE_HARD_MASK)
+ #define BCM63268_RESET_PCIE_EXT	SOFTRESET_63268_PCIE_EXT_MASK
+ 
+ /*
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -45,6 +45,11 @@
+ #define BCM_PCIE_MEM_END_PA_6328	(BCM_PCIE_MEM_BASE_PA_6328 +	\
+ 					BCM_PCIE_MEM_SIZE_6328 - 1)
+ 
++#define BCM_PCIE_MEM_BASE_PA_63268	0x11000000
++#define BCM_PCIE_MEM_SIZE_63268		(15 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_63268	(BCM_PCIE_MEM_BASE_PA_63268 +	\
++					BCM_PCIE_MEM_SIZE_63268 - 1)
++
+ /*
+  * Internal registers are accessed through KSEG3
+  */
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -337,11 +337,15 @@ static int __init bcm63xx_pci_init(void)
+ 	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
+ 		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
+ 		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
++	} else if (BCMCPU_IS_63268()) {
++		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_63268;
++		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_63268;
+ 	}
+ 
+ 	switch (bcm63xx_get_cpu_id()) {
+ 	case BCM6328_CPU_ID:
+ 	case BCM6362_CPU_ID:
++	case BCM63268_CPU_ID:
+ 		return bcm63xx_register_pcie();
+ 	case BCM3368_CPU_ID:
+ 	case BCM6348_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
new file mode 100644
index 0000000..c7a2225
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch
@@ -0,0 +1,672 @@
+From 60c29522a8c77d96145d965589c56befda7d4c3d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 01:24:09 +0100
+Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318
+
+---
+ arch/mips/bcm63xx/Kconfig                         |   5 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c         |   2 +-
+ arch/mips/bcm63xx/clk.c                           |   8 +-
+ arch/mips/bcm63xx/cpu.c                           |  53 +++++++++++
+ arch/mips/bcm63xx/dev-flash.c                     |   3 +
+ arch/mips/bcm63xx/dev-spi.c                       |   2 +-
+ arch/mips/bcm63xx/irq.c                           |  10 ++
+ arch/mips/bcm63xx/prom.c                          |   2 +-
+ arch/mips/bcm63xx/reset.c                         |  24 +++++
+ arch/mips/bcm63xx/setup.c                         |   5 +-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  | 107 ++++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  75 ++++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h      |   1 +
+ 13 files changed, 291 insertions(+), 6 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -18,6 +18,11 @@ config BCM63XX_EHCI
+ 	select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
+ 	select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
+ 
++config BCM63XX_CPU_6318
++	bool "support 6318 CPU"
++	select SYS_HAS_CPU_BMIPS32_3300
++	select HW_HAS_PCI
++
+ config BCM63XX_CPU_6328
+ 	bool "support 6328 CPU"
+ 	select SYS_HAS_CPU_BMIPS4350
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -825,7 +825,7 @@ void __init board_prom_init(void)
+ 	/* read base address of boot chip select (0)
+ 	 * 6328/6362 do not have MPI but boot from a fixed address
+ 	 */
+-	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
++	if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
+ 		val = 0x18000000;
+ 	} else {
+ 		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -252,7 +252,9 @@ static void hsspi_set(struct clk *clk, i
+ {
+ 	u32 mask;
+ 
+-	if (BCMCPU_IS_6328())
++	if (BCMCPU_IS_6318())
++		mask = CKCTL_6318_HSSPI_EN;
++	else if (BCMCPU_IS_6328())
+ 		mask = CKCTL_6328_HSSPI_EN;
+ 	else if (BCMCPU_IS_6362())
+ 		mask = CKCTL_6362_HSSPI_EN;
+@@ -417,12 +419,16 @@ void clk_put(struct clk *clk)
+ 
+ EXPORT_SYMBOL(clk_put);
+ 
++#define HSSPI_PLL_HZ_6318	250000000
+ #define HSSPI_PLL_HZ_6328	133333333
+ #define HSSPI_PLL_HZ_6362	400000000
+ 
+ static int __init bcm63xx_clk_init(void)
+ {
+ 	switch (bcm63xx_get_cpu_id()) {
++	case BCM6318_CPU_ID:
++		clk_hsspi.rate = HSSPI_PLL_HZ_6318;
++		break;
+ 	case BCM6328_CPU_ID:
+ 		clk_hsspi.rate = HSSPI_PLL_HZ_6328;
+ 		break;
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -41,6 +41,14 @@ static const int bcm3368_irqs[] = {
+ 	__GEN_CPU_IRQ_TABLE(3368)
+ };
+ 
++static const unsigned long bcm6318_regs_base[] = {
++	__GEN_CPU_REGS_TABLE(6318)
++};
++
++static const int bcm6318_irqs[] = {
++	__GEN_CPU_IRQ_TABLE(6318)
++};
++
+ static const unsigned long bcm6328_regs_base[] = {
+ 	__GEN_CPU_REGS_TABLE(6328)
+ };
+@@ -134,6 +142,10 @@ unsigned int bcm63xx_get_memory_size(voi
+ 	return bcm63xx_memory_size;
+ }
+ 
++#define STRAP_OVERRIDE_BUS_REG		0x0
++#define OVERRIDE_BUS_MIPS_FREQ_SHIFT	23
++#define OVERRIDE_BUS_MIPS_FREQ_MASK	(0x3 << OVERRIDE_BUS_MIPS_FREQ_SHIFT)
++
+ static unsigned int detect_cpu_clock(void)
+ {
+ 	u32 cpu_id = bcm63xx_get_cpu_id();
+@@ -142,6 +154,28 @@ static unsigned int detect_cpu_clock(voi
+ 	case BCM3368_CPU_ID:
+ 		return 300000000;
+ 
++	case BCM6318_CPU_ID:
++	{
++		unsigned int tmp, mips_pll_fcvo;
++
++		tmp = bcm_readl(BCM_6318_STRAP_BASE + STRAP_OVERRIDE_BUS_REG);
++
++		pr_info("strap_override_bus = %08x\n", tmp);
++
++		mips_pll_fcvo = (tmp & OVERRIDE_BUS_MIPS_FREQ_MASK)
++				>> OVERRIDE_BUS_MIPS_FREQ_SHIFT;
++
++		switch (mips_pll_fcvo) {
++		case 0:
++			return 166000000;
++		case 1:
++			return 400000000;
++		case 2:
++			return 250000000;
++		case 3:
++			return 333000000;
++		};
++	}
+ 	case BCM6328_CPU_ID:
+ 	{
+ 		unsigned int tmp, mips_pll_fcvo;
+@@ -297,6 +331,13 @@ static unsigned int detect_memory_size(v
+ 	unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+ 	u32 val;
+ 
++	if (BCMCPU_IS_6318()) {
++		val = bcm_sdram_readl(SDRAM_CFG_REG);
++		val = val & SDRAM_CFG_6318_SPACE_MASK;
++		val >>= SDRAM_CFG_6318_SPACE_SHIFT;
++		return 1 << (val + 20);
++	}
++
+ 	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268())
+ 		return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+ 
+@@ -344,6 +385,12 @@ void __init bcm63xx_cpu_init(void)
+ 
+ 	switch (c->cputype) {
+ 	case CPU_BMIPS3300:
++		if ((read_c0_prid() & 0xff) >= 0x33) {
++			/* BCM6318 */
++			chipid_reg = BCM_6368_PERF_BASE;
++			break;
++		}
++
+ 		if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
+ 			__cpu_name[cpu] = "Broadcom BCM6338";
+ 		/* fall-through */
+@@ -391,6 +438,10 @@ void __init bcm63xx_cpu_init(void)
+ 	bcm63xx_cpu_variant = bcm63xx_cpu_id;
+ 
+ 	switch (bcm63xx_cpu_id) {
++	case BCM6318_CPU_ID:
++		bcm63xx_regs_base = bcm6318_regs_base;
++		bcm63xx_irqs = bcm6318_irqs;
++		break;
+ 	case BCM3368_CPU_ID:
+ 		bcm63xx_regs_base = bcm3368_regs_base;
+ 		bcm63xx_irqs = bcm3368_irqs;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -60,6 +60,9 @@ static int __init bcm63xx_detect_flash_t
+ 	u32 val;
+ 
+ 	switch (bcm63xx_get_cpu_id()) {
++	case BCM6318_CPU_ID:
++		/* only support serial flash */
++		return BCM63XX_FLASH_TYPE_SERIAL;
+ 	case BCM6328_CPU_ID:
+ 		val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
+ 		if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -70,7 +70,7 @@ static struct platform_device bcm63xx_sp
+ 
+ int __init bcm63xx_spi_register(void)
+ {
+-	if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
++	if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6345())
+ 		return -ENODEV;
+ 
+ 	spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -441,6 +441,16 @@ static void bcm63xx_init_irq(void)
+ 		ext_irq_count = 4;
+ 		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
+ 		break;
++	case BCM6318_CPU_ID:
++		irq_stat_addr[0] += PERF_IRQSTAT_6318_REG;
++		irq_mask_addr[0] += PERF_IRQMASK_6318_REG;
++		irq_bits = 128;
++		ext_irq_count = 4;
++		is_ext_irq_cascaded = 1;
++		ext_irq_start = BCM_6318_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++		ext_irq_end = BCM_6318_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++		ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6318;
++		break;
+ 	case BCM6328_CPU_ID:
+ 		irq_stat_addr[0] += PERF_IRQSTAT_6328_REG(0);
+ 		irq_mask_addr[0] += PERF_IRQMASK_6328_REG(0);
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -72,7 +72,7 @@ void __init prom_init(void)
+ 
+ 			if (reg & OTP_6328_REG3_TP1_DISABLED)
+ 				bmips_smp_enabled = 0;
+-		} else if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
++		} else if (BCMCPU_IS_6318() || BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
+ 			bmips_smp_enabled = 0;
+ 		}
+ 
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -43,6 +43,23 @@
+ #define BCM3368_RESET_PCIE	0
+ #define BCM3368_RESET_PCIE_EXT	0
+ 
++
++#define BCM6318_RESET_SPI	SOFTRESET_6318_SPI_MASK
++#define BCM6318_RESET_ENET	0
++#define BCM6318_RESET_USBH	SOFTRESET_6318_USBH_MASK
++#define BCM6318_RESET_USBD	SOFTRESET_6318_USBS_MASK
++#define BCM6318_RESET_DSL	0
++#define BCM6318_RESET_SAR	SOFTRESET_6318_SAR_MASK
++#define BCM6318_RESET_EPHY	SOFTRESET_6318_EPHY_MASK
++#define BCM6318_RESET_ENETSW	SOFTRESET_6318_ENETSW_MASK
++#define BCM6318_RESET_PCM	0
++#define BCM6318_RESET_MPI	0
++#define BCM6318_RESET_PCIE	\
++				(SOFTRESET_6318_PCIE_MASK |		\
++				 SOFTRESET_6318_PCIE_CORE_MASK |	\
++				 SOFTRESET_6318_PCIE_HARD_MASK)
++#define BCM6318_RESET_PCIE_EXT	SOFTRESET_6318_PCIE_EXT_MASK
++
+ #define BCM6328_RESET_SPI	SOFTRESET_6328_SPI_MASK
+ #define BCM6328_RESET_ENET	0
+ #define BCM6328_RESET_USBH	SOFTRESET_6328_USBH_MASK
+@@ -147,6 +164,10 @@ static const u32 bcm3368_reset_bits[] =
+ 	__GEN_RESET_BITS_TABLE(3368)
+ };
+ 
++static const u32 bcm6318_reset_bits[] = {
++	__GEN_RESET_BITS_TABLE(6318)
++};
++
+ static const u32 bcm6328_reset_bits[] = {
+ 	__GEN_RESET_BITS_TABLE(6328)
+ };
+@@ -183,6 +204,9 @@ static int __init bcm63xx_reset_bits_ini
+ 	if (BCMCPU_IS_3368()) {
+ 		reset_reg = PERF_SOFTRESET_6358_REG;
+ 		bcm63xx_reset_bits = bcm3368_reset_bits;
++	} else if (BCMCPU_IS_6318()) {
++		reset_reg = PERF_SOFTRESET_6318_REG;
++		bcm63xx_reset_bits = bcm6318_reset_bits;
+ 	} else if (BCMCPU_IS_6328()) {
+ 		reset_reg = PERF_SOFTRESET_6328_REG;
+ 		bcm63xx_reset_bits = bcm6328_reset_bits;
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -71,6 +71,9 @@ void bcm63xx_machine_reboot(void)
+ 	case BCM3368_CPU_ID:
+ 		perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
+ 		break;
++	case BCM6318_CPU_ID:
++		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6318;
++		break;
+ 	case BCM6328_CPU_ID:
+ 		perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
+ 		break;
+@@ -110,7 +113,7 @@ void bcm63xx_machine_reboot(void)
+ 		bcm6348_a1_reboot();
+ 
+ 	printk(KERN_INFO "triggering watchdog soft-reset...\n");
+-	if (BCMCPU_IS_6328()) {
++	if (BCMCPU_IS_6318() || BCMCPU_IS_6328()) {
+ 		bcm_wdt_writel(1, WDT_SOFTRESET_REG);
+ 	} else {
+ 		reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -10,6 +10,7 @@
+  * arm mach-types)
+  */
+ #define BCM3368_CPU_ID		0x3368
++#define BCM6318_CPU_ID		0x6318
+ #define BCM6328_CPU_ID		0x6328
+ #define BCM63281_CPU_ID		0x63281
+ #define BCM63283_CPU_ID		0x63283
+@@ -38,6 +39,10 @@ static inline u32 __pure __bcm63xx_get_c
+ 		case BCM3368_CPU_ID:
+ #endif
+ 
++#ifdef CONFIG_BCM63XX_CPU_6318
++		case BCM6318_CPU_ID:
++#endif
++
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 		case BCM6328_CPU_ID:
+ #endif
+@@ -87,6 +92,7 @@ static inline u32 __pure bcm63xx_get_cpu
+ }
+ 
+ #define BCMCPU_IS_3368()	(bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
++#define BCMCPU_IS_6318()	(bcm63xx_get_cpu_id() == BCM6318_CPU_ID)
+ #define BCMCPU_IS_6328()	(bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
+ #define BCMCPU_IS_6338()	(bcm63xx_get_cpu_id() == BCM6338_CPU_ID)
+ #define BCMCPU_IS_6345()	(bcm63xx_get_cpu_id() == BCM6345_CPU_ID)
+@@ -98,6 +104,8 @@ static inline u32 __pure bcm63xx_get_cpu
+ 
+ #define BCMCPU_VARIANT_IS_3368() \
+ 	(bcm63xx_get_cpu_variant() == BCM3368_CPU_ID)
++#define BCMCPU_VARIANT_IS_6318() \
++	(bcm63xx_get_cpu_variant() == BCM6318_CPU_ID)
+ #define BCMCPU_VARIANT_IS_63281() \
+ 	(bcm63xx_get_cpu_variant() == BCM63281_CPU_ID)
+ #define BCMCPU_VARIANT_IS_63283() \
+@@ -252,6 +260,56 @@ enum bcm63xx_regs_set {
+ #define BCM_3368_MISC_BASE		(0xdeadbeef)
+ 
+ /*
++ * 6318 register sets base address
++ */
++#define BCM_6318_DSL_LMEM_BASE		(0xdeadbeef)
++#define BCM_6318_PERF_BASE		(0xb0000000)
++#define BCM_6318_TIMER_BASE		(0xb0000040)
++#define BCM_6318_WDT_BASE		(0xb0000068)
++#define BCM_6318_UART0_BASE		(0xb0000100)
++#define BCM_6318_UART1_BASE		(0xdeadbeef)
++#define BCM_6318_GPIO_BASE		(0xb0000080)
++#define BCM_6318_SPI_BASE		(0xdeadbeef)
++#define BCM_6318_HSSPI_BASE		(0xb0003000)
++#define BCM_6318_UDC0_BASE		(0xdeadbeef)
++#define BCM_6318_USBDMA_BASE		(0xb0006800)
++#define BCM_6318_OHCI0_BASE		(0xb0005100)
++#define BCM_6318_OHCI_PRIV_BASE		(0xdeadbeef)
++#define BCM_6318_USBH_PRIV_BASE		(0xb0005200)
++#define BCM_6318_USBD_BASE		(0xb0006000)
++#define BCM_6318_MPI_BASE		(0xdeadbeef)
++#define BCM_6318_PCMCIA_BASE		(0xdeadbeef)
++#define BCM_6318_PCIE_BASE		(0xb0010000)
++#define BCM_6318_SDRAM_REGS_BASE	(0xdeadbeef)
++#define BCM_6318_DSL_BASE		(0xdeadbeef)
++#define BCM_6318_UBUS_BASE		(0xdeadbeef)
++#define BCM_6318_ENET0_BASE		(0xdeadbeef)
++#define BCM_6318_ENET1_BASE		(0xdeadbeef)
++#define BCM_6318_ENETDMA_BASE		(0xb0088000)
++#define BCM_6318_ENETDMAC_BASE		(0xb0088200)
++#define BCM_6318_ENETDMAS_BASE		(0xb0088400)
++#define BCM_6318_ENETSW_BASE		(0xb0080000)
++#define BCM_6318_EHCI0_BASE		(0xb0005000)
++#define BCM_6318_SDRAM_BASE		(0xb0004000)
++#define BCM_6318_MEMC_BASE		(0xdeadbeef)
++#define BCM_6318_DDR_BASE		(0xdeadbeef)
++#define BCM_6318_M2M_BASE		(0xdeadbeef)
++#define BCM_6318_ATM_BASE		(0xdeadbeef)
++#define BCM_6318_XTM_BASE		(0xdeadbeef)
++#define BCM_6318_XTMDMA_BASE		(0xb000c000)
++#define BCM_6318_XTMDMAC_BASE		(0xdeadbeef)
++#define BCM_6318_XTMDMAS_BASE		(0xdeadbeef)
++#define BCM_6318_PCM_BASE		(0xdeadbeef)
++#define BCM_6318_PCMDMA_BASE		(0xdeadbeef)
++#define BCM_6318_PCMDMAC_BASE		(0xdeadbeef)
++#define BCM_6318_PCMDMAS_BASE		(0xdeadbeef)
++#define BCM_6318_RNG_BASE		(0xdeadbeef)
++#define BCM_6318_MISC_BASE		(0xb0000280)
++#define BCM_6318_OTP_BASE		(0xdeadbeef)
++
++#define BCM_6318_STRAP_BASE		(0xb0000900)
++
++/*
+  * 6328 register sets base address
+  */
+ #define BCM_6328_DSL_LMEM_BASE		(0xdeadbeef)
+@@ -819,6 +877,55 @@ enum bcm63xx_irq {
+ #define BCM_3368_EXT_IRQ2		(IRQ_INTERNAL_BASE + 27)
+ #define BCM_3368_EXT_IRQ3		(IRQ_INTERNAL_BASE + 28)
+ 
++/*
++ * 6318 irqs
++ */
++#define BCM_6318_HIGH_IRQ_BASE		(IRQ_INTERNAL_BASE + 32)
++#define BCM_6318_VERY_HIGH_IRQ_BASE	(BCM_6318_HIGH_IRQ_BASE + 32)
++
++#define BCM_6318_TIMER_IRQ		(IRQ_INTERNAL_BASE + 31)
++#define BCM_6318_SPI_IRQ		0
++#define BCM_6318_UART0_IRQ		(IRQ_INTERNAL_BASE + 28)
++#define BCM_6318_UART1_IRQ		0
++#define BCM_6318_DSL_IRQ		(IRQ_INTERNAL_BASE + 21)
++#define BCM_6318_UDC0_IRQ		0
++#define BCM_6318_ENET0_IRQ		0
++#define BCM_6318_ENET1_IRQ		0
++#define BCM_6318_ENET_PHY_IRQ		(IRQ_INTERNAL_BASE + 12)
++#define BCM_6318_HSSPI_IRQ		(IRQ_INTERNAL_BASE + 29)
++#define BCM_6318_OHCI0_IRQ		(BCM_6318_HIGH_IRQ_BASE + 9)
++#define BCM_6318_EHCI0_IRQ		(BCM_6318_HIGH_IRQ_BASE + 10)
++#define BCM_6318_USBD_IRQ		(IRQ_INTERNAL_BASE + 4)
++#define BCM_6318_USBD_RXDMA0_IRQ	(IRQ_INTERNAL_BASE + 5)
++#define BCM_6318_USBD_TXDMA0_IRQ	(IRQ_INTERNAL_BASE + 6)
++#define BCM_6318_USBD_RXDMA1_IRQ	(IRQ_INTERNAL_BASE + 7)
++#define BCM_6318_USBD_TXDMA1_IRQ	(IRQ_INTERNAL_BASE + 8)
++#define BCM_6318_USBD_RXDMA2_IRQ	(IRQ_INTERNAL_BASE + 9)
++#define BCM_6318_USBD_TXDMA2_IRQ	(IRQ_INTERNAL_BASE + 10)
++#define BCM_6318_PCMCIA_IRQ		0
++#define BCM_6318_ENET0_RXDMA_IRQ	0
++#define BCM_6318_ENET0_TXDMA_IRQ	0
++#define BCM_6318_ENET1_RXDMA_IRQ	0
++#define BCM_6318_ENET1_TXDMA_IRQ	0
++#define BCM_6318_PCI_IRQ		(IRQ_INTERNAL_BASE + 23)
++#define BCM_6318_ATM_IRQ		0
++#define BCM_6318_ENETSW_RXDMA0_IRQ	(BCM_6318_HIGH_IRQ_BASE + 0)
++#define BCM_6318_ENETSW_RXDMA1_IRQ	(BCM_6318_HIGH_IRQ_BASE + 1)
++#define BCM_6318_ENETSW_RXDMA2_IRQ	(BCM_6318_HIGH_IRQ_BASE + 2)
++#define BCM_6318_ENETSW_RXDMA3_IRQ	(BCM_6318_HIGH_IRQ_BASE + 3)
++#define BCM_6318_ENETSW_TXDMA0_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 10)
++#define BCM_6318_ENETSW_TXDMA1_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 11)
++#define BCM_6318_ENETSW_TXDMA2_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 12)
++#define BCM_6318_ENETSW_TXDMA3_IRQ	(BCM_6318_VERY_HIGH_IRQ_BASE + 13)
++#define BCM_6318_XTM_IRQ		(BCM_6318_HIGH_IRQ_BASE + 31)
++#define BCM_6318_XTM_DMA0_IRQ		(BCM_6318_HIGH_IRQ_BASE + 11)
++
++#define BCM_6318_PCM_DMA0_IRQ		(IRQ_INTERNAL_BASE + 2)
++#define BCM_6318_PCM_DMA1_IRQ		(IRQ_INTERNAL_BASE + 3)
++#define BCM_6318_EXT_IRQ0		(IRQ_INTERNAL_BASE + 24)
++#define BCM_6318_EXT_IRQ1		(IRQ_INTERNAL_BASE + 25)
++#define BCM_6318_EXT_IRQ2		(IRQ_INTERNAL_BASE + 26)
++#define BCM_6318_EXT_IRQ3		(IRQ_INTERNAL_BASE + 27)
+ 
+ /*
+  * 6328 irqs
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -52,6 +52,39 @@
+ 					 CKCTL_3368_EMUSB_EN | \
+ 					 CKCTL_3368_USBU_EN)
+ 
++#define CKCTL_6318_ADSL_ASB_EN		(1 << 0)
++#define CKCTL_6318_USB_ASB_EN		(1 << 1)
++#define CKCTL_6318_MIPS_ASB_EN		(1 << 2)
++#define CKCTL_6318_PCIE_ASB_EN		(1 << 3)
++#define CKCTL_6318_PHYMIPS_ASB_EN	(1 << 4)
++#define CKCTL_6318_ROBOSW_ASB_EN	(1 << 5)
++#define CKCTL_6318_SAR_ASB_EN		(1 << 6)
++#define CKCTL_6318_SDR_ASB_EN		(1 << 7)
++#define CKCTL_6318_SWREG_ASB_EN		(1 << 8)
++#define CKCTL_6318_PERIPH_ASB_EN	(1 << 9)
++#define CKCTL_6318_CPUBUS160_EN		(1 << 10)
++#define CKCTL_6318_ADSL_EN		(1 << 11)
++#define CKCTL_6318_SAR125_EN		(1 << 12)
++#define CKCTL_6318_MIPS_EN		(1 << 13)
++#define CKCTL_6318_PCIE_EN		(1 << 14)
++#define CKCTL_6318_ROBOSW250_EN		(1 << 16)
++#define CKCTL_6318_ROBOSW025_EN		(1 << 17)
++#define CKCTL_6318_SDR_EN		(1 << 19)
++#define CKCTL_6318_USB_EN		(1 << 20) /* both device and host */
++#define CKCTL_6318_HSSPI_EN		(1 << 25)
++#define CKCTL_6318_PCIE25_EN		(1 << 27)
++#define CKCTL_6318_PHYMIPS_EN		(1 << 28)
++#define CKCTL_6318_ADSL_AFE_EN		(1 << 29)
++#define CKCTL_6318_ADSL_QPROC_EN	(1 << 30)
++
++#define CKCTL_6318_ALL_SAFE_EN		(CKCTL_6318_PHYMIPS_EN |	\
++					CKCTL_6318_ADSL_QPROC_EN |	\
++					CKCTL_6318_ADSL_AFE_EN |	\
++					CKCTL_6318_ADSL_EN |		\
++					CKCTL_6318_SAR_EN  |		\
++					CKCTL_6318_USB_EN |		\
++					CKCTL_6318_PCIE_EN)
++
+ #define CKCTL_6328_PHYMIPS_EN		(1 << 0)
+ #define CKCTL_6328_ADSL_QPROC_EN	(1 << 1)
+ #define CKCTL_6328_ADSL_AFE_EN		(1 << 2)
+@@ -259,12 +292,27 @@
+ 					CKCTL_63268_TBUS_EN |		\
+ 					CKCTL_63268_ROBOSW250_EN)
+ 
++/* UBUS Clock Control register */
++#define PERF_UB_CKCTL_REG		0x10
++
++#define UB_CKCTL_6318_ADSL_EN		(1 << 0)
++#define UB_CKCTL_6318_ARB_EN		(1 << 1)
++#define UB_CKCTL_6318_MIPS_EN		(1 << 2)
++#define UB_CKCTL_6318_PCIE_EN		(1 << 3)
++#define UB_CKCTL_6318_PERIPH_EN		(1 << 4)
++#define UB_CKCTL_6318_PHYMIPS_EN	(1 << 5)
++#define UB_CKCTL_6318_ROBOSW_EN		(1 << 6)
++#define UB_CKCTL_6318_SAR_EN		(1 << 7)
++#define UB_CKCTL_6318_SDR_EN		(1 << 8)
++#define UB_CKCTL_6318_USB_EN		(1 << 9)
++
+ /* System PLL Control register	*/
+ #define PERF_SYS_PLL_CTL_REG		0x8
+ #define SYS_PLL_SOFT_RESET		0x1
+ 
+ /* Interrupt Mask register */
+ #define PERF_IRQMASK_3368_REG		0xc
++#define PERF_IRQMASK_6318_REG		0x20
+ #define PERF_IRQMASK_6328_REG(x)	(0x20 + (x) * 0x10)
+ #define PERF_IRQMASK_6338_REG		0xc
+ #define PERF_IRQMASK_6345_REG		0xc
+@@ -276,6 +324,7 @@
+ 
+ /* Interrupt Status register */
+ #define PERF_IRQSTAT_3368_REG		0x10
++#define PERF_IRQSTAT_6318_REG		0x30
+ #define PERF_IRQSTAT_6328_REG(x)	(0x28 + (x) * 0x10)
+ #define PERF_IRQSTAT_6338_REG		0x10
+ #define PERF_IRQSTAT_6345_REG		0x10
+@@ -287,6 +336,7 @@
+ 
+ /* External Interrupt Configuration register */
+ #define PERF_EXTIRQ_CFG_REG_3368	0x14
++#define PERF_EXTIRQ_CFG_REG_6318	0x18
+ #define PERF_EXTIRQ_CFG_REG_6328	0x18
+ #define PERF_EXTIRQ_CFG_REG_6338	0x14
+ #define PERF_EXTIRQ_CFG_REG_6345	0x14
+@@ -320,6 +370,7 @@
+ 
+ /* Soft Reset register */
+ #define PERF_SOFTRESET_REG		0x28
++#define PERF_SOFTRESET_6318_REG		0x10
+ #define PERF_SOFTRESET_6328_REG		0x10
+ #define PERF_SOFTRESET_6358_REG		0x34
+ #define PERF_SOFTRESET_6362_REG		0x10
+@@ -333,6 +384,18 @@
+ #define SOFTRESET_3368_USBS_MASK	(1 << 11)
+ #define SOFTRESET_3368_PCM_MASK		(1 << 13)
+ 
++#define SOFTRESET_6318_SPI_MASK		(1 << 0)
++#define SOFTRESET_6318_EPHY_MASK	(1 << 1)
++#define SOFTRESET_6318_SAR_MASK		(1 << 2)
++#define SOFTRESET_6318_ENETSW_MASK	(1 << 3)
++#define SOFTRESET_6318_USBS_MASK	(1 << 4)
++#define SOFTRESET_6318_USBH_MASK	(1 << 5)
++#define SOFTRESET_6318_PCIE_CORE_MASK	(1 << 6)
++#define SOFTRESET_6318_PCIE_MASK	(1 << 7)
++#define SOFTRESET_6318_PCIE_EXT_MASK	(1 << 8)
++#define SOFTRESET_6318_PCIE_HARD_MASK	(1 << 9)
++#define SOFTRESET_6318_ADSL_MASK	(1 << 10)
++
+ #define SOFTRESET_6328_SPI_MASK		(1 << 0)
+ #define SOFTRESET_6328_EPHY_MASK	(1 << 1)
+ #define SOFTRESET_6328_SAR_MASK		(1 << 2)
+@@ -504,8 +567,17 @@
+ #define TIMER_IRQSTAT_TIMER1_IR_EN	(1 << 9)
+ #define TIMER_IRQSTAT_TIMER2_IR_EN	(1 << 10)
+ 
++#define TIMER_IRQMASK_6318_REG		0x0
++#define TIMER_IRQSTAT_6318_REG		0x4
++#define IRQSTATMASK_TIMER0		(1 << 0)
++#define IRQSTATMASK_TIMER1		(1 << 1)
++#define IRQSTATMASK_TIMER2		(1 << 2)
++#define IRQSTATMASK_TIMER3		(1 << 3)
++#define IRQSTATMASK_WDT			(1 << 4)
++
+ /* Timer control register */
+ #define TIMER_CTLx_REG(x)		(0x4 + (x * 4))
++#define TIMER_CTRx_6318_REG(x)		(0x8 + (x * 4))
+ #define TIMER_CTL0_REG			0x4
+ #define TIMER_CTL1_REG			0x8
+ #define TIMER_CTL2_REG			0xC
+@@ -1252,6 +1324,8 @@
+ #define SDRAM_CFG_32B_MASK		(1 << SDRAM_CFG_32B_SHIFT)
+ #define SDRAM_CFG_BANK_SHIFT		13
+ #define SDRAM_CFG_BANK_MASK		(1 << SDRAM_CFG_BANK_SHIFT)
++#define SDRAM_CFG_6318_SPACE_SHIFT	4
++#define SDRAM_CFG_6318_SPACE_MASK	(0xf << SDRAM_CFG_6318_SPACE_SHIFT)
+ 
+ #define SDRAM_MBASE_REG			0xc
+ 
+--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+@@ -22,6 +22,7 @@ static inline int is_bcm63xx_internal_re
+ 		if (offset >= 0xfff00000)
+ 			return 1;
+ 		break;
++	case BCM6318_CPU_ID:
+ 	case BCM6328_CPU_ID:
+ 	case BCM6362_CPU_ID:
+ 	case BCM6368_CPU_ID:
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ b/arch/mips/bcm63xx/dev-hsspi.c
+@@ -35,7 +35,8 @@ static struct platform_device bcm63xx_hs
+ 
+ int __init bcm63xx_hsspi_register(void)
+ {
+-	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_63268())
++	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
++		!BCMCPU_IS_63268())
+ 		return -ENODEV;
+ 
+ 	spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+--- a/arch/mips/bcm63xx/dev-usb-usbd.c
++++ b/arch/mips/bcm63xx/dev-usb-usbd.c
+@@ -41,7 +41,7 @@ int __init bcm63xx_usbd_register(const s
+ 		IRQ_USBD_RXDMA2, IRQ_USBD_TXDMA2 };
+ 	int i;
+ 
+-	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
++	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6368())
+ 		return 0;
+ 
+ 	usbd_resources[0].start = bcm63xx_regset_address(RSET_USBD);
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -176,8 +176,8 @@ static int __init register_shared(void)
+ 	else
+ 		shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+ 
+-	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
+-		BCMCPU_IS_63268())
++	if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++		BCMCPU_IS_6368() || BCMCPU_IS_63268())
+ 		chan_count = 32;
+ 	else if (BCMCPU_IS_6345())
+ 		chan_count = 8;
+@@ -277,8 +277,8 @@ bcm63xx_enetsw_register(const struct bcm
+ {
+ 	int ret;
+ 
+-	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368() &&
+-		!BCMCPU_IS_63268())
++	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6362() &&
++		!BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+ 		return -ENODEV;
+ 
+ 	ret = register_shared();
+@@ -295,7 +295,7 @@ bcm63xx_enetsw_register(const struct bcm
+ 
+ 	memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
+ 
+-	if (BCMCPU_IS_6328())
++	if (BCMCPU_IS_6318() || BCMCPU_IS_6328())
+ 		enetsw_pd.num_ports = ENETSW_PORTS_6328;
+ 	else if (BCMCPU_IS_6362() || BCMCPU_IS_6368() ||
+ 		 BCMCPU_VARIANT_IS_63168() || BCMCPU_VARIANT_IS_63169())
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -9,6 +9,8 @@ int __init bcm63xx_gpio_init(void);
+ static inline unsigned long bcm63xx_gpio_count(void)
+ {
+ 	switch (bcm63xx_get_cpu_id()) {
++	case BCM6318_CPU_ID:
++		return 50;
+ 	case BCM6328_CPU_ID:
+ 		return 32;
+ 	case BCM3368_CPU_ID:
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -81,7 +81,8 @@ static struct platform_device bcm63xx_eh
+ 
+ int __init bcm63xx_ehci_register(void)
+ {
+-	if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
++		!BCMCPU_IS_6362() && !BCMCPU_IS_6368())
+ 		return 0;
+ 
+ 	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
diff --git a/target/linux/brcm63xx/patches-3.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch b/target/linux/brcm63xx/patches-3.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
new file mode 100644
index 0000000..71044f8
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/342-MIPS-BCM63XX-split-PCIe-reset-signals.patch
@@ -0,0 +1,156 @@
+From 4bdfacdeaf3c988c4f3256c88118893eac640b03 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 8 Dec 2013 14:17:50 +0100
+Subject: [PATCH 52/53] MIPS: BCM63XX: split PCIE reset signals
+
+---
+ arch/mips/bcm63xx/reset.c                          | 39 ++++++++++++++--------
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h |  2 ++
+ arch/mips/pci/pci-bcm63xx.c                        |  7 ++++
+ 3 files changed, 34 insertions(+), 14 deletions(-)
+
+--- a/arch/mips/bcm63xx/reset.c
++++ b/arch/mips/bcm63xx/reset.c
+@@ -28,7 +28,9 @@
+ 	[BCM63XX_RESET_PCM]		= BCM## __cpu ##_RESET_PCM,	\
+ 	[BCM63XX_RESET_MPI]		= BCM## __cpu ##_RESET_MPI,	\
+ 	[BCM63XX_RESET_PCIE]		= BCM## __cpu ##_RESET_PCIE,	\
+-	[BCM63XX_RESET_PCIE_EXT]	= BCM## __cpu ##_RESET_PCIE_EXT,
++	[BCM63XX_RESET_PCIE_EXT]	= BCM## __cpu ##_RESET_PCIE_EXT, \
++	[BCM63XX_RESET_PCIE_CORE]	= BCM## __cpu ##_RESET_PCIE_CORE, \
++	[BCM63XX_RESET_PCIE_HARD]	= BCM## __cpu ##_RESET_PCIE_HARD,
+ 
+ #define BCM3368_RESET_SPI	SOFTRESET_3368_SPI_MASK
+ #define BCM3368_RESET_ENET	SOFTRESET_3368_ENET_MASK
+@@ -42,6 +44,8 @@
+ #define BCM3368_RESET_MPI	SOFTRESET_3368_MPI_MASK
+ #define BCM3368_RESET_PCIE	0
+ #define BCM3368_RESET_PCIE_EXT	0
++#define BCM3368_RESET_PCIE_CORE	0
++#define BCM3368_RESET_PCIE_HARD	0
+ 
+ 
+ #define BCM6318_RESET_SPI	SOFTRESET_6318_SPI_MASK
+@@ -54,11 +58,10 @@
+ #define BCM6318_RESET_ENETSW	SOFTRESET_6318_ENETSW_MASK
+ #define BCM6318_RESET_PCM	0
+ #define BCM6318_RESET_MPI	0
+-#define BCM6318_RESET_PCIE	\
+-				(SOFTRESET_6318_PCIE_MASK |		\
+-				 SOFTRESET_6318_PCIE_CORE_MASK |	\
+-				 SOFTRESET_6318_PCIE_HARD_MASK)
++#define BCM6318_RESET_PCIE	SOFTRESET_6318_PCIE_MASK
+ #define BCM6318_RESET_PCIE_EXT	SOFTRESET_6318_PCIE_EXT_MASK
++#define BCM6318_RESET_PCIE_CORE	SOFTRESET_6318_PCIE_CORE_MASK
++#define BCM6318_RESET_PCIE_HARD	SOFTRESET_6318_PCIE_HARD_MASK
+ 
+ #define BCM6328_RESET_SPI	SOFTRESET_6328_SPI_MASK
+ #define BCM6328_RESET_ENET	0
+@@ -70,11 +73,10 @@
+ #define BCM6328_RESET_ENETSW	SOFTRESET_6328_ENETSW_MASK
+ #define BCM6328_RESET_PCM	SOFTRESET_6328_PCM_MASK
+ #define BCM6328_RESET_MPI	0
+-#define BCM6328_RESET_PCIE	\
+-				(SOFTRESET_6328_PCIE_MASK |		\
+-				 SOFTRESET_6328_PCIE_CORE_MASK |	\
+-				 SOFTRESET_6328_PCIE_HARD_MASK)
++#define BCM6328_RESET_PCIE	SOFTRESET_6328_PCIE_MASK
+ #define BCM6328_RESET_PCIE_EXT	SOFTRESET_6328_PCIE_EXT_MASK
++#define BCM6328_RESET_PCIE_CORE	SOFTRESET_6328_PCIE_CORE_MASK
++#define BCM6328_RESET_PCIE_HARD	SOFTRESET_6328_PCIE_HARD_MASK
+ 
+ #define BCM6338_RESET_SPI	SOFTRESET_6338_SPI_MASK
+ #define BCM6338_RESET_ENET	SOFTRESET_6338_ENET_MASK
+@@ -88,6 +90,8 @@
+ #define BCM6338_RESET_MPI	0
+ #define BCM6338_RESET_PCIE	0
+ #define BCM6338_RESET_PCIE_EXT	0
++#define BCM6338_RESET_PCIE_CORE	0
++#define BCM6338_RESET_PCIE_HARD	0
+ 
+ #define BCM6348_RESET_SPI	SOFTRESET_6348_SPI_MASK
+ #define BCM6348_RESET_ENET	SOFTRESET_6348_ENET_MASK
+@@ -101,6 +105,8 @@
+ #define BCM6348_RESET_MPI	0
+ #define BCM6348_RESET_PCIE	0
+ #define BCM6348_RESET_PCIE_EXT	0
++#define BCM6348_RESET_PCIE_CORE	0
++#define BCM6348_RESET_PCIE_HARD	0
+ 
+ #define BCM6358_RESET_SPI	SOFTRESET_6358_SPI_MASK
+ #define BCM6358_RESET_ENET	SOFTRESET_6358_ENET_MASK
+@@ -114,6 +120,8 @@
+ #define BCM6358_RESET_MPI	SOFTRESET_6358_MPI_MASK
+ #define BCM6358_RESET_PCIE	0
+ #define BCM6358_RESET_PCIE_EXT	0
++#define BCM6358_RESET_PCIE_CORE	0
++#define BCM6358_RESET_PCIE_HARD	0
+ 
+ #define BCM6362_RESET_SPI	SOFTRESET_6362_SPI_MASK
+ #define BCM6362_RESET_ENET	0
+@@ -125,9 +133,10 @@
+ #define BCM6362_RESET_ENETSW	SOFTRESET_6362_ENETSW_MASK
+ #define BCM6362_RESET_PCM	SOFTRESET_6362_PCM_MASK
+ #define BCM6362_RESET_MPI	0
+-#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
+-				 SOFTRESET_6362_PCIE_CORE_MASK)
++#define BCM6362_RESET_PCIE      SOFTRESET_6362_PCIE_MASK
+ #define BCM6362_RESET_PCIE_EXT	SOFTRESET_6362_PCIE_EXT_MASK
++#define BCM6362_RESET_PCIE_CORE	SOFTRESET_6362_PCIE_CORE_MASK
++#define BCM6362_RESET_PCIE_HARD	0
+ 
+ #define BCM6368_RESET_SPI	SOFTRESET_6368_SPI_MASK
+ #define BCM6368_RESET_ENET	0
+@@ -141,6 +150,8 @@
+ #define BCM6368_RESET_MPI	SOFTRESET_6368_MPI_MASK
+ #define BCM6368_RESET_PCIE	0
+ #define BCM6368_RESET_PCIE_EXT	0
++#define BCM6368_RESET_PCIE_CORE	0
++#define BCM6368_RESET_PCIE_HARD	0
+ 
+ #define BCM63268_RESET_SPI	SOFTRESET_63268_SPI_MASK
+ #define BCM63268_RESET_ENET	0
+@@ -152,10 +163,10 @@
+ #define BCM63268_RESET_ENETSW	SOFTRESET_63268_ENETSW_MASK
+ #define BCM63268_RESET_PCM	SOFTRESET_63268_PCM_MASK
+ #define BCM63268_RESET_MPI	0
+-#define BCM63268_RESET_PCIE	(SOFTRESET_63268_PCIE_MASK | \
+-				 SOFTRESET_63268_PCIE_CORE_MASK | \
+-				 SOFTRESET_63268_PCIE_HARD_MASK)
++#define BCM63268_RESET_PCIE	SOFTRESET_63268_PCIE_MASK
+ #define BCM63268_RESET_PCIE_EXT	SOFTRESET_63268_PCIE_EXT_MASK
++#define BCM63268_RESET_PCIE_CORE	SOFTRESET_63268_PCIE_CORE_MASK
++#define BCM63268_RESET_PCIE_HARD	SOFTRESET_63268_PCIE_HARD_MASK
+ 
+ /*
+  * core reset bits
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_reset.h
+@@ -14,6 +14,8 @@ enum bcm63xx_core_reset {
+ 	BCM63XX_RESET_MPI,
+ 	BCM63XX_RESET_PCIE,
+ 	BCM63XX_RESET_PCIE_EXT,
++	BCM63XX_RESET_PCIE_CORE,
++	BCM63XX_RESET_PCIE_HARD,
+ };
+ 
+ void bcm63xx_core_set_reset(enum bcm63xx_core_reset, int reset);
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -135,9 +135,16 @@ static void __init bcm63xx_reset_pcie(vo
+ 
+ 	/* reset the PCIe core */
+ 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
++	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
+ 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
++	if (BCMCPU_IS_6328() || BCMCPU_IS_63268()) {
++		bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 1);
++		mdelay(10);
++		bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
++	}
+ 	mdelay(10);
+ 
++	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
+ 	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
+ 	mdelay(10);
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
new file mode 100644
index 0000000..3ba3357
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/343-MIPS-BCM63XX-add-PCIe-support-for-BCM6318.patch
@@ -0,0 +1,342 @@
+From 11a8ab8dac4ef5d0d70199843043927edce1d4db Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 15 Dec 2013 20:47:34 +0100
+Subject: [PATCH 53/53] MIPS: BCM63XX: add PCIe support for BCM6318
+
+---
+ arch/mips/bcm63xx/clk.c                           |  25 ++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h   |   6 ++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |  60 +++++++++++-
+ arch/mips/pci/ops-bcm63xx.c                       |  16 +++-
+ arch/mips/pci/pci-bcm63xx.c                       | 106 ++++++++++++++++++----
+ 5 files changed, 184 insertions(+), 29 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -50,6 +50,18 @@ static void bcm_hwclock_set(u32 mask, in
+ 	bcm_perf_writel(reg, PERF_CKCTL_REG);
+ }
+ 
++static void bcm_ub_hwclock_set(u32 mask, int enable)
++{
++	u32 reg;
++
++	reg = bcm_perf_readl(PERF_UB_CKCTL_REG);
++	if (enable)
++		reg |= mask;
++	else
++		reg &= ~mask;
++	bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
++}
++
+ /*
+  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+  */
+@@ -317,12 +329,17 @@ static struct clk clk_ipsec = {
+ 
+ static void pcie_set(struct clk *clk, int enable)
+ {
+-	if (BCMCPU_IS_6328())
++	if (BCMCPU_IS_6318()) {
++		bcm_hwclock_set(CKCTL_6318_PCIE_EN, enable);
++		bcm_hwclock_set(CKCTL_6318_PCIE25_EN, enable);
++		bcm_ub_hwclock_set(UB_CKCTL_6318_PCIE_EN, enable);
++	} else if (BCMCPU_IS_6328()) {
+ 		bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
+-	else if (BCMCPU_IS_6362())
++	} else if (BCMCPU_IS_6362()) {
+ 		bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
+-	else if (BCMCPU_IS_63268())
++	} else if (BCMCPU_IS_63268()) {
+ 		bcm_hwclock_set(CKCTL_63268_PCIE_EN, enable);
++	}
+ }
+ 
+ static struct clk clk_pcie = {
+@@ -405,7 +422,7 @@ struct clk *clk_get(struct device *dev,
+ 	if ((BCMCPU_IS_6362() || BCMCPU_IS_6368() || BCMCPU_IS_63268()) &&
+ 	    !strcmp(id, "ipsec"))
+ 		return &clk_ipsec;
+-	if ((BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
++	if ((BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) &&
+ 	    !strcmp(id, "pcie"))
+ 		return &clk_pcie;
+ 	return ERR_PTR(-ENOENT);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+@@ -40,6 +40,12 @@
+ #define BCM_CB_MEM_END_PA		(BCM_CB_MEM_BASE_PA +		\
+ 					BCM_CB_MEM_SIZE - 1)
+ 
++#define BCM_PCIE_MEM_BASE_PA_6318	0x10200000
++#define BCM_PCIE_MEM_SIZE_6318		(1 * 1024 * 1024)
++#define BCM_PCIE_MEM_END_PA_6318	(BCM_PCIE_MEM_BASE_PA_6318 +	\
++					BCM_PCIE_MEM_SIZE_6318 - 1)
++
++
+ #define BCM_PCIE_MEM_BASE_PA_6328	0x10f00000
+ #define BCM_PCIE_MEM_SIZE_6328		(1 * 1024 * 1024)
+ #define BCM_PCIE_MEM_END_PA_6328	(BCM_PCIE_MEM_BASE_PA_6328 +	\
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1542,6 +1542,17 @@
+  * _REG relative to RSET_PCIE
+  *************************************************************************/
+ 
++#define PCIE_SPECIFIC_REG		0x188
++#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT	0
++#define SPECIFIC_ENDIAN_MODE_BAR1_MASK	(0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT	2
++#define SPECIFIC_ENDIAN_MODE_BAR2_MASK	(0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT	4
++#define SPECIFIC_ENDIAN_MODE_BAR3_MASK	(0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
++#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN	0
++#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
++#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN	2
++
+ #define PCIE_CONFIG2_REG		0x408
+ #define CONFIG2_BAR1_SIZE_EN		1
+ #define CONFIG2_BAR1_SIZE_MASK		0xf
+@@ -1587,7 +1598,54 @@
+ #define PCIE_RC_INT_C			(1 << 2)
+ #define PCIE_RC_INT_D			(1 << 3)
+ 
+-#define PCIE_DEVICE_OFFSET		0x8000
++#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG	0x400c
++#define C2P_MEM_WIN_ENDIAN_MODE_MASK	0x3
++#define C2P_MEM_WIN_ENDIAN_NO_SWAP	0
++#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
++#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
++#define C2P_MEM_WIN_BASE_ADDR_SHIFT	20
++#define C2P_MEM_WIN_BASE_ADDR_MASK	(0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
++
++#define PCIE_RC_BAR1_CONFIG_LO_REG	0x402c
++#define RC_BAR_CFG_LO_SIZE_256MB	0xd
++#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT	20
++#define RC_BAR_CFG_LO_MATCH_ADDR_MASK	(0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
++
++#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
++#define C2P_BASELIMIT_LIMIT_SHIFT	20
++#define C2P_BASELIMIT_LIMIT_MASK	(0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
++#define C2P_BASELIMIT_BASE_SHIFT	4
++#define C2P_BASELIMIT_BASE_MASK		(0xfff << C2P_BASELIMIT_BASE_SHIFT)
++
++#define PCIE_UBUS_BAR1_CFG_REMAP_REG	0x4088
++#define BAR1_CFG_REMAP_OFFSET_SHIFT	20
++#define BAR1_CFG_REMAP_OFFSET_MASK	(0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
++#define BAR1_CFG_REMAP_ACCESS_EN	1
++
++#define PCIE_HARD_DEBUG_REG		0x4204
++#define HARD_DEBUG_SERDES_IDDQ		(1 << 23)
++
++#define PCIE_CPU_INT1_MASK_CLEAR_REG	0x830c
++#define CPU_INT_PCIE_ERR_ATTN_CPU	(1 << 0)
++#define CPU_INT_PCIE_INTA		(1 << 1)
++#define CPU_INT_PCIE_INTB		(1 << 2)
++#define CPU_INT_PCIE_INTC		(1 << 3)
++#define CPU_INT_PCIE_INTD		(1 << 4)
++#define CPU_INT_PCIE_INTR		(1 << 5)
++#define CPU_INT_PCIE_NMI		(1 << 6)
++#define CPU_INT_PCIE_UBUS		(1 << 7)
++#define CPU_INT_IPI			(1 << 8)
++
++#define PCIE_EXT_CFG_INDEX_REG		0x8400
++#define EXT_CFG_FUNC_NUM_SHIFT		12
++#define EXT_CFG_FUNC_NUM_MASK		(0x7 << EXT_CFG_FUNC_NUM_SHIFT)
++#define EXT_CFG_DEV_NUM_SHIFT		15
++#define EXT_CFG_DEV_NUM_MASK		(0xf << EXT_CFG_DEV_NUM_SHIFT)
++#define EXT_CFG_BUS_NUM_SHIFT		20
++#define EXT_CFG_BUS_NUM_MASK		(0xff << EXT_CFG_BUS_NUM_SHIFT)
++
++#define PCIE_DEVICE_OFFSET_6318		0x9000
++#define PCIE_DEVICE_OFFSET_6328		0x8000
+ 
+ /*************************************************************************
+  * _REG relative to RSET_OTP
+--- a/arch/mips/pci/ops-bcm63xx.c
++++ b/arch/mips/pci/ops-bcm63xx.c
+@@ -488,8 +488,12 @@ static int bcm63xx_pcie_read(struct pci_
+ 	if (!bcm63xx_pcie_can_access(bus, devfn))
+ 		return PCIBIOS_DEVICE_NOT_FOUND;
+ 
+-	if (bus->number == PCIE_BUS_DEVICE)
+-		reg += PCIE_DEVICE_OFFSET;
++	if (bus->number == PCIE_BUS_DEVICE) {
++		if (BCMCPU_IS_6318())
++			reg += PCIE_DEVICE_OFFSET_6318;
++		else
++			reg += PCIE_DEVICE_OFFSET_6328;
++	}
+ 
+ 	data = bcm_pcie_readl(reg);
+ 
+@@ -508,8 +512,12 @@ static int bcm63xx_pcie_write(struct pci
+ 	if (!bcm63xx_pcie_can_access(bus, devfn))
+ 		return PCIBIOS_DEVICE_NOT_FOUND;
+ 
+-	if (bus->number == PCIE_BUS_DEVICE)
+-		reg += PCIE_DEVICE_OFFSET;
++	if (bus->number == PCIE_BUS_DEVICE) {
++		if (BCMCPU_IS_6318())
++			reg += PCIE_DEVICE_OFFSET_6318;
++		else
++			reg += PCIE_DEVICE_OFFSET_6328;
++	}
+ 
+ 
+ 	data = bcm_pcie_readl(reg);
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -118,7 +118,7 @@ static void bcm63xx_int_cfg_writel(u32 v
+ 
+ void __iomem *pci_iospace_start;
+ 
+-static void __init bcm63xx_reset_pcie(void)
++static void __init bcm63xx_reset_pcie_gen1(void)
+ {
+ 	u32 val;
+ 	u32 reg;
+@@ -152,20 +152,32 @@ static void __init bcm63xx_reset_pcie(vo
+ 	mdelay(200);
+ }
+ 
+-static struct clk *pcie_clk;
+-
+-static int __init bcm63xx_register_pcie(void)
++static void __init bcm63xx_reset_pcie_gen2(void)
+ {
+ 	u32 val;
+ 
+-	/* enable clock */
+-	pcie_clk = clk_get(NULL, "pcie");
+-	if (IS_ERR_OR_NULL(pcie_clk))
+-		return -ENODEV;
++	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_HARD, 0);
+ 
+-	clk_prepare_enable(pcie_clk);
++	/* reset the PCIe core */
++	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
++	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
++	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 1);
++	mdelay(10);
++	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
++	mdelay(10);
++	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
++	mdelay(10);
++	val = bcm_pcie_readl(PCIE_HARD_DEBUG_REG);
++	val &= ~HARD_DEBUG_SERDES_IDDQ;
++	bcm_pcie_writel(val, PCIE_HARD_DEBUG_REG);
++	mdelay(10);
++	bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_CORE, 0);
++	mdelay(200);
++}
+ 
+-	bcm63xx_reset_pcie();
++static void __init bcm63xx_init_pcie_gen1(void)
++{
++	u32 val;
+ 
+ 	/* configure the PCIe bridge */
+ 	val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
+@@ -190,6 +202,65 @@ static int __init bcm63xx_register_pcie(
+ 	val |= OPT2_CFG_TYPE1_BD_SEL;
+ 	bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
+ 
++	/* set bar0 to little endian */
++	val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
++	val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
++	val |= BASEMASK_REMAP_EN;
++	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
++
++	val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
++	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
++}
++
++static void __init bcm63xx_init_pcie_gen2(void)
++{
++	u32 val;
++
++	bcm_pcie_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
++			CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
++			PCIE_CPU_INT1_MASK_CLEAR_REG);
++
++	val = bcm_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
++	val |= (bcm_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT) <<
++	       C2P_BASELIMIT_BASE_SHIFT;
++
++	bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
++
++	/* set bar0 to little endian */
++	val = bcm_pcie_readl(PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
++	val |= bcm_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
++	val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
++	bcm_pcie_writel(val, PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
++
++	bcm_pcie_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN, PCIE_SPECIFIC_REG);
++	bcm_pcie_writel(RC_BAR_CFG_LO_SIZE_256MB, PCIE_RC_BAR1_CONFIG_LO_REG);
++	bcm_pcie_writel(BAR1_CFG_REMAP_ACCESS_EN, PCIE_UBUS_BAR1_CFG_REMAP_REG);
++
++	bcm_pcie_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
++			PCIE_EXT_CFG_INDEX_REG);
++}
++
++static struct clk *pcie_clk;
++
++static int __init bcm63xx_register_pcie(void)
++{
++	u32 val;
++
++	/* enable clock */
++	pcie_clk = clk_get(NULL, "pcie");
++	if (IS_ERR_OR_NULL(pcie_clk))
++		return -ENODEV;
++
++	clk_prepare_enable(pcie_clk);
++
++	if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_63268()) {
++		bcm63xx_reset_pcie_gen1();
++		bcm63xx_init_pcie_gen1();
++	} else {
++		bcm63xx_reset_pcie_gen2();
++		bcm63xx_init_pcie_gen2();
++	}
++
+ 	/* setup class code as bridge */
+ 	val = bcm_pcie_readl(PCIE_IDVAL3_REG);
+ 	val &= ~IDVAL3_CLASS_CODE_MASK;
+@@ -201,15 +272,6 @@ static int __init bcm63xx_register_pcie(
+ 	val &= ~CONFIG2_BAR1_SIZE_MASK;
+ 	bcm_pcie_writel(val, PCIE_CONFIG2_REG);
+ 
+-	/* set bar0 to little endian */
+-	val = (bcm_pcie_mem_resource.start >> 20) << BASEMASK_BASE_SHIFT;
+-	val |= (bcm_pcie_mem_resource.end >> 20) << BASEMASK_MASK_SHIFT;
+-	val |= BASEMASK_REMAP_EN;
+-	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
+-
+-	val = (bcm_pcie_mem_resource.start >> 20) << REBASE_ADDR_BASE_SHIFT;
+-	bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
+-
+ 	register_pci_controller(&bcm63xx_pcie_controller);
+ 
+ 	return 0;
+@@ -341,7 +403,10 @@ static int __init bcm63xx_pci_init(void)
+ 	if (!bcm63xx_pci_enabled)
+ 		return -ENODEV;
+ 
+-	if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
++	if (BCMCPU_IS_6318()) {
++		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6318;
++		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6318;
++	} if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
+ 		bcm_pcie_mem_resource.start = BCM_PCIE_MEM_BASE_PA_6328;
+ 		bcm_pcie_mem_resource.end = BCM_PCIE_MEM_END_PA_6328;
+ 	} else if (BCMCPU_IS_63268()) {
+@@ -350,6 +415,7 @@ static int __init bcm63xx_pci_init(void)
+ 	}
+ 
+ 	switch (bcm63xx_get_cpu_id()) {
++	case BCM6318_CPU_ID:
+ 	case BCM6328_CPU_ID:
+ 	case BCM6362_CPU_ID:
+ 	case BCM63268_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch b/target/linux/brcm63xx/patches-3.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
new file mode 100644
index 0000000..a91a29b
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/344-MIPS-BCM63XX-detect-flash-type-early-and-store-the-r.patch
@@ -0,0 +1,74 @@
+From 9a97177b907330971aa7bf41855fafc2602e1c18 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Dec 2013 12:26:57 +0100
+Subject: [PATCH 51/56] MIPS: BCM63XX: detect flash type early and store the
+ result
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                          | 10 +++++++---
+ arch/mips/bcm63xx/prom.c                               |  4 ++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |  2 ++
+ 3 files changed, 13 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -22,6 +22,8 @@
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+ 
++static int flash_type;
++
+ static struct mtd_partition mtd_partitions[] = {
+ 	{
+ 		.name		= "cfe",
+@@ -108,13 +110,15 @@ static int __init bcm63xx_detect_flash_t
+ 	}
+ }
+ 
++void __init bcm63xx_flash_detect(void)
++{
++	flash_type = bcm63xx_detect_flash_type();
++}
++
+ int __init bcm63xx_flash_register(void)
+ {
+-	int flash_type;
+ 	u32 val;
+ 
+-	flash_type = bcm63xx_detect_flash_type();
+-
+ 	switch (flash_type) {
+ 	case BCM63XX_FLASH_TYPE_PARALLEL:
+ 		/* read base address of boot chip select (0) */
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -18,6 +18,7 @@
+ #include <bcm63xx_io.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_gpio.h>
++#include <bcm63xx_dev_flash.h>
+ 
+ void __init prom_init(void)
+ {
+@@ -56,6 +57,9 @@ void __init prom_init(void)
+ 	/* register gpiochip */
+ 	bcm63xx_gpio_init();
+ 
++	/* detect and setup flash access */
++	bcm63xx_flash_detect();
++
+ 	/* do low level board init */
+ 	board_prom_init();
+ 
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -7,6 +7,8 @@ enum {
+ 	BCM63XX_FLASH_TYPE_NAND,
+ };
+ 
++void bcm63xx_flash_detect(void);
++
+ int __init bcm63xx_flash_register(void);
+ 
+ #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch b/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
new file mode 100644
index 0000000..2b19600
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/345-MIPS-BCM63XX-fixup-mapped-SPI-flash-access-on-boot.patch
@@ -0,0 +1,63 @@
+From 1cacd0f7b0d35f8e3d3f8a69ecb3b5e436d6b9e8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Sun, 22 Dec 2013 13:25:25 +0100
+Subject: [PATCH 52/56] MIPS: BCM63XX: fixup mapped SPI flash access on boot
+
+Some bootloaders leave the flash access in an invalid state with dual
+read enabled; fix it by disabling it and falling back to simple fast
+reads.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c | 36 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -110,9 +110,46 @@ static int __init bcm63xx_detect_flash_t
+ 	}
+ }
+ 
++#define HSSPI_FLASH_CTRL_REG		0x14
++#define FLASH_CTRL_READ_OPCODE_MASK	0xff
++#define FLASH_CTRL_ADDR_BYTES_MASK	(0x3 << 8)
++#define FLASH_CTRL_ADDR_BYTES_2		(0 << 8)
++#define FLASH_CTRL_ADDR_BYTES_3		(1 << 8)
++#define FLASH_CTRL_ADDR_BYTES_4		(2 << 8)
++#define FLASH_CTRL_MB_EN		(1 << 23)
++
+ void __init bcm63xx_flash_detect(void)
+ {
+ 	flash_type = bcm63xx_detect_flash_type();
++
++	/* reduce flash mapping to single i/o reads for safety */
++	if (flash_type == BCM63XX_FLASH_TYPE_SERIAL &&
++	    (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++	     BCMCPU_IS_63268())) {
++		u32 val = bcm_rset_readl(RSET_HSSPI, HSSPI_FLASH_CTRL_REG);
++
++		if (!(val & FLASH_CTRL_MB_EN))
++			return;
++
++		val &= ~FLASH_CTRL_MB_EN;
++		val &= ~FLASH_CTRL_READ_OPCODE_MASK;
++
++		switch (val & FLASH_CTRL_ADDR_BYTES_MASK) {
++		case FLASH_CTRL_ADDR_BYTES_3:
++			val |= 0x0b; /* OPCODE_FAST_READ */
++			break;
++		case FLASH_CTRL_ADDR_BYTES_4:
++			val |= 0x0c; /* OPCODE_FAST_READ_4B */
++			break;
++		case FLASH_CTRL_ADDR_BYTES_2:
++		default:
++			pr_warn("unsupported address byte mode (%x), not fixing up\n",
++				val & FLASH_CTRL_ADDR_BYTES_MASK);
++			return;
++		}
++
++		bcm_rset_writel(RSET_HSSPI, val, HSSPI_FLASH_CTRL_REG);
++	}
+ }
+ 
+ int __init bcm63xx_flash_register(void)
diff --git a/target/linux/brcm63xx/patches-3.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch b/target/linux/brcm63xx/patches-3.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
new file mode 100644
index 0000000..384702c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/346-MIPS-BCM63XX-USB-ENETSW-6318-clocks.patch
@@ -0,0 +1,56 @@
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -136,7 +136,11 @@ static struct clk clk_ephy = {
+  */
+ static void enetsw_set(struct clk *clk, int enable)
+ {
+-	if (BCMCPU_IS_6328())
++	if (BCMCPU_IS_6318()) {
++		bcm_hwclock_set(CKCTL_6318_ROBOSW250_EN |
++				CKCTL_6318_ROBOSW025_EN, enable);
++		bcm_ub_hwclock_set(UB_CKCTL_6318_ROBOSW_EN, enable);
++	} else if (BCMCPU_IS_6328())
+ 		bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
+ 	else if (BCMCPU_IS_6362())
+ 		bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
+@@ -183,18 +187,22 @@ static struct clk clk_pcm = {
+  */
+ static void usbh_set(struct clk *clk, int enable)
+ {
+-	if (BCMCPU_IS_6328())
++	if (BCMCPU_IS_6318()) {
++		bcm_hwclock_set(CKCTL_6318_USB_EN, enable);
++		bcm_ub_hwclock_set(UB_CKCTL_6318_USB_EN, enable);
++	} else if (BCMCPU_IS_6328()) {
+ 		bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
+-	else if (BCMCPU_IS_6348())
++	} else if (BCMCPU_IS_6348()) {
+ 		bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
+-	else if (BCMCPU_IS_6362())
++	} else if (BCMCPU_IS_6362()) {
+ 		bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+-	else if (BCMCPU_IS_6368())
++	} else if (BCMCPU_IS_6368()) {
+ 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+-	else if (BCMCPU_IS_63268())
++	} else if (BCMCPU_IS_63268()) {
+ 		bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
+-	else
++	} else {
+ 		return;
++	}
+ 
+ 	if (enable)
+ 		msleep(100);
+@@ -405,9 +413,9 @@ struct clk *clk_get(struct device *dev,
+ 		return &clk_enetsw;
+ 	if (!strcmp(id, "ephy"))
+ 		return &clk_ephy;
+-	if (!strcmp(id, "usbh"))
++	if (!strcmp(id, "usbh") || (BCMCPU_IS_6318() && !strcmp(id, "usbd")))
+ 		return &clk_usbh;
+-	if (!strcmp(id, "usbd"))
++	if (!strcmp(id, "usbd") && !BCMCPU_IS_6318())
+ 		return &clk_usbd;
+ 	if (!strcmp(id, "spi"))
+ 		return &clk_spi;
diff --git a/target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch b/target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch
new file mode 100644
index 0000000..5742e2c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/347-MIPS-BCM6318-USB-support.patch
@@ -0,0 +1,124 @@
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -109,6 +109,27 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+ 		reg |= USBH_PRIV_SETUP_IOC_MASK;
+ 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++	} else if (BCMCPU_IS_6318()) {
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
++		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
++		reg |= USBH_PRIV_SETUP_IOC_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
++		reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
+ 	}
+ 
+ 	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+@@ -144,6 +165,27 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+ 		reg |= USBH_PRIV_SETUP_IOC_MASK;
+ 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++	} else if (BCMCPU_IS_6318()) {
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
++		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6318_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6318_REG);
++		reg |= USBH_PRIV_SETUP_IOC_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
++		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
++		reg |= USBH_PRIV_SIM_CTRL_LADDR_SEL;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SIM_CTRL_6318_REG);
+ 	}
+ 
+ 	spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -680,6 +680,12 @@
+ #define GPIO_MODE_6368_SPI_SSN4		(1 << 30)
+ #define GPIO_MODE_6368_SPI_SSN5		(1 << 31)
+ 
++#define GPIO_PINMUX_SEL0_6318		0x1c
++#define GPIO_PINMUX_SEL0_GPIO13_SHIFT	26
++#define GPIO_PINMUX_SEL0_GPIO13_MASK	(0x3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_PWRON	(1 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_LED	(2 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
++#define GPIO_PINMUX_SEL0_GPIO13_GPIO	(3 << GPIO_PINMUX_SEL0_GPIO13_SHIFT)
+ 
+ #define GPIO_PINMUX_OTHR_REG		0x24
+ #define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
+@@ -998,6 +1004,7 @@
+ 
+ #define USBH_PRIV_SWAP_6358_REG		0x0
+ #define USBH_PRIV_SWAP_6368_REG		0x1c
++#define USBH_PRIV_SWAP_6318_REG		0x0c
+ 
+ #define USBH_PRIV_SWAP_USBD_SHIFT	6
+ #define USBH_PRIV_SWAP_USBD_MASK	(1 << USBH_PRIV_SWAP_USBD_SHIFT)
+@@ -1023,6 +1030,13 @@
+ #define USBH_PRIV_SETUP_IOC_SHIFT	4
+ #define USBH_PRIV_SETUP_IOC_MASK	(1 << USBH_PRIV_SETUP_IOC_SHIFT)
+ 
++#define USBH_PRIV_SETUP_6318_REG	0x00
++#define USBH_PRIV_PLL_CTRL1_6318_REG	0x04
++#define USBH_PRIV_PLL_CTRL1_SUSP_EN	(1 << 27)
++#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN	(1 << 31)
++#define USBH_PRIV_SIM_CTRL_6318_REG	0x20
++#define USBH_PRIV_SIM_CTRL_LADDR_SEL	(1 << 5)
++
+ 
+ /*************************************************************************
+  * _REG relative to RSET_USBD
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -914,6 +914,15 @@ void __init board_prom_init(void)
+ 	}
+ 
+ 	bcm_gpio_writel(val, GPIO_MODE_REG);
++
++#if IS_ENABLED(CONFIG_USB)
++	if (BCMCPU_IS_6318() && (board.has_ehci0 || board.has_ohci0)) {
++		val = bcm_gpio_readl(GPIO_PINMUX_SEL0_6318);
++		val &= ~GPIO_PINMUX_SEL0_GPIO13_MASK;
++		val |= GPIO_PINMUX_SEL0_GPIO13_PWRON;
++		bcm_gpio_writel(val, GPIO_PINMUX_SEL0_6318);
++	}
++#endif
+ }
+ 
+ /*
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -22,6 +22,8 @@ config BCM63XX_CPU_6318
+ 	bool "support 6318 CPU"
+ 	select SYS_HAS_CPU_BMIPS32_3300
+ 	select HW_HAS_PCI
++	select BCM63XX_OHCI
++	select BCM63XX_EHCI
+ 
+ config BCM63XX_CPU_6328
+ 	bool "support 6328 CPU"
diff --git a/target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch b/target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
new file mode 100644
index 0000000..2489c21
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/348-MIPS-BCM63XX-fix-BCM63268-USB-clock.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -585,6 +585,9 @@
+ #define TIMER_CTL_MONOTONIC_MASK	(1 << 30)
+ #define TIMER_CTL_ENABLE_MASK		(1 << 31)
+ 
++/* Clock reset control (63268 only) */
++#define TIMER_CLK_RST_CTL_REG		0x2c
++#define CLK_RST_CTL_USB_REF_CLK_EN	(1 << 18)
+ 
+ /*************************************************************************
+  * _REG relative to RSET_WDT
+@@ -1546,6 +1549,11 @@
+ #define STRAPBUS_63268_FCVO_SHIFT	21
+ #define STRAPBUS_63268_FCVO_MASK	(0xf << STRAPBUS_63268_FCVO_SHIFT)
+ 
++#define MISC_IDDQ_CTRL_6328_REG		0x48
++#define MISC_IDDQ_CTRL_63268_REG	0x4c
++
++#define IDDQ_CTRL_63268_USBH		(1 << 4)
++
+ #define MISC_STRAPBUS_6328_REG		0x240
+ #define STRAPBUS_6328_FCVO_SHIFT	7
+ #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -62,6 +62,26 @@ static void bcm_ub_hwclock_set(u32 mask,
+ 	bcm_perf_writel(reg, PERF_UB_CKCTL_REG);
+ }
+ 
++static void bcm_misc_iddq_set(u32 mask, int enable)
++{
++	u32 offset;
++	u32 reg;
++
++	if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
++		offset = MISC_IDDQ_CTRL_6328_REG;
++	else if (BCMCPU_IS_63268())
++		offset = MISC_IDDQ_CTRL_63268_REG;
++	else
++		return;
++
++	reg = bcm_misc_readl(offset);
++	if (enable)
++		reg &= ~mask;
++	else
++		reg |= mask;
++	bcm_misc_writel(reg, offset);
++}
++
+ /*
+  * Ethernet MAC "misc" clock: dma clocks and main clock on 6348
+  */
+@@ -199,7 +219,17 @@ static void usbh_set(struct clk *clk, in
+ 	} else if (BCMCPU_IS_6368()) {
+ 		bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+ 	} else if (BCMCPU_IS_63268()) {
++		u32 reg;
++
+ 		bcm_hwclock_set(CKCTL_63268_USBH_EN, enable);
++		bcm_misc_iddq_set(IDDQ_CTRL_63268_USBH, enable);
++		bcm63xx_core_set_reset(BCM63XX_RESET_USBH, !enable);
++		reg = bcm_timer_readl(TIMER_CLK_RST_CTL_REG);
++		if (enable)
++			reg |= CLK_RST_CTL_USB_REF_CLK_EN;
++		else
++			reg &= ~CLK_RST_CTL_USB_REF_CLK_EN;
++		bcm_timer_writel(reg, TIMER_CLK_RST_CTL_REG);
+ 	} else {
+ 		return;
+ 	}
diff --git a/target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch b/target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
new file mode 100644
index 0000000..1dff9bf
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/349-MIPS-BCM63XX-add-BCM63268-USB-support.patch
@@ -0,0 +1,117 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1032,11 +1032,18 @@
+ #define USBH_PRIV_SETUP_6368_REG	0x28
+ #define USBH_PRIV_SETUP_IOC_SHIFT	4
+ #define USBH_PRIV_SETUP_IOC_MASK	(1 << USBH_PRIV_SETUP_IOC_SHIFT)
++#define USBH_PRIV_SETUP_IPP_SHIFT	5
++#define USBH_PRIV_SETUP_IPP_MASK	(1 << USBH_PRIV_SETUP_IPP_SHIFT)
+ 
+ #define USBH_PRIV_SETUP_6318_REG	0x00
++#define USBH_PRIV_PLL_CTRL1_6368_REG	0x18
+ #define USBH_PRIV_PLL_CTRL1_6318_REG	0x04
+-#define USBH_PRIV_PLL_CTRL1_SUSP_EN	(1 << 27)
+-#define USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN	(1 << 31)
++
++#define USBH_PRIV_PLL_CTRL1_6318_SUSP_EN	(1 << 27)
++#define USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN	(1 << 31)
++#define USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN	(1 << 9)
++#define USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY	(1 << 10)
++
+ #define USBH_PRIV_SIM_CTRL_6318_REG	0x20
+ #define USBH_PRIV_SIM_CTRL_LADDR_SEL	(1 << 5)
+ 
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -72,6 +72,8 @@ config BCM63XX_CPU_63268
+ 	bool "support 63268 CPU"
+ 	select SYS_HAS_CPU_BMIPS4350
+ 	select HW_HAS_PCI
++	select BCM63XX_OHCI
++	select BCM63XX_EHCI
+ endmenu
+ 
+ source "arch/mips/bcm63xx/boards/Kconfig"
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -82,7 +82,7 @@ static struct platform_device bcm63xx_eh
+ int __init bcm63xx_ehci_register(void)
+ {
+ 	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
+-		!BCMCPU_IS_6362() && !BCMCPU_IS_6368())
++		!BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+ 		return 0;
+ 
+ 	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
+--- a/arch/mips/bcm63xx/usb-common.c
++++ b/arch/mips/bcm63xx/usb-common.c
+@@ -109,9 +109,24 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+ 		reg |= USBH_PRIV_SETUP_IOC_MASK;
+ 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++	} else if (BCMCPU_IS_63268()) {
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++		reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
++		reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++		reg |= USBH_PRIV_SETUP_IOC_MASK;
++		reg &= ~USBH_PRIV_SETUP_IPP_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
++		reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
++			 USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
+ 	} else if (BCMCPU_IS_6318()) {
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++		reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
+ 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+ 
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
+@@ -124,7 +139,7 @@ void bcm63xx_usb_priv_ohci_cfg_set(void)
+ 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
+ 
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++		reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
+ 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+ 
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
+@@ -165,9 +180,24 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+ 		reg |= USBH_PRIV_SETUP_IOC_MASK;
+ 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++	} else if (BCMCPU_IS_63268()) {
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
++		reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
++		reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
++		reg |= USBH_PRIV_SETUP_IOC_MASK;
++		reg &= ~USBH_PRIV_SETUP_IPP_MASK;
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
++
++		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6368_REG);
++		reg &= ~(USBH_PRIV_PLL_CTRL1_63268_IDDQ_PWRDN |
++			 USBH_PRIV_PLL_CTRL1_63268_PWRDN_DELAY);
++		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6368_REG);
+ 	} else if (BCMCPU_IS_6318()) {
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-		reg |= USBH_PRIV_PLL_CTRL1_SUSP_EN;
++		reg |= USBH_PRIV_PLL_CTRL1_6318_SUSP_EN;
+ 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+ 
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6318_REG);
+@@ -180,7 +210,7 @@ void bcm63xx_usb_priv_ehci_cfg_set(void)
+ 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6318_REG);
+ 
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_PLL_CTRL1_6318_REG);
+-		reg &= ~USBH_PRIV_PLL_CTRL1_IDDQ_PWRDN;
++		reg &= ~USBH_PRIV_PLL_CTRL1_6318_IDDQ_PWRDN;
+ 		bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_PLL_CTRL1_6318_REG);
+ 
+ 		reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SIM_CTRL_6318_REG);
diff --git a/target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch b/target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
new file mode 100644
index 0000000..43709af
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/350-MIPS-BCM63XX-support-settings-num-usbh-ports.patch
@@ -0,0 +1,107 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -42,6 +42,7 @@ struct board_info {
+ 
+ 	/* USB config */
+ 	struct bcm63xx_usbd_platform_data usbd;
++	unsigned int num_usbh_ports:2;
+ 
+ 	/* DSP config */
+ 	struct bcm63xx_dsp_platform_data dsp;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+@@ -1,6 +1,6 @@
+ #ifndef BCM63XX_DEV_USB_EHCI_H_
+ #define BCM63XX_DEV_USB_EHCI_H_
+ 
+-int bcm63xx_ehci_register(void);
++int bcm63xx_ehci_register(unsigned int num_ports);
+ 
+ #endif /* BCM63XX_DEV_USB_EHCI_H_ */
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+@@ -1,6 +1,6 @@
+ #ifndef BCM63XX_DEV_USB_OHCI_H_
+ #define BCM63XX_DEV_USB_OHCI_H_
+ 
+-int bcm63xx_ohci_register(void);
++int bcm63xx_ohci_register(unsigned int num_ports);
+ 
+ #endif /* BCM63XX_DEV_USB_OHCI_H_ */
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -965,6 +965,7 @@ int __init board_register_devices(void)
+ {
+ 	int button_count = 0;
+ 	int led_count = 0;
++	int usbh_ports = 0;
+ 
+ 	if (board.has_uart0)
+ 		bcm63xx_uart_register(0);
+@@ -987,14 +988,21 @@ int __init board_register_devices(void)
+ 	    !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
+ 		bcm63xx_enetsw_register(&board.enetsw);
+ 
++	if ((board.has_ohci0 || board.has_ehci0)) {
++		usbh_ports = board.num_usbh_ports;
++
++		if (!usbh_ports || WARN_ON(usbh_ports > 1 && board.has_usbd))
++			usbh_ports = 1;
++	}
++
+ 	if (board.has_usbd)
+ 		bcm63xx_usbd_register(&board.usbd);
+ 
+ 	if (board.has_ehci0)
+-		bcm63xx_ehci_register();
++		bcm63xx_ehci_register(usbh_ports);
+ 
+ 	if (board.has_ohci0)
+-		bcm63xx_ohci_register();
++		bcm63xx_ohci_register(usbh_ports);
+ 
+ 	if (board.has_dsp)
+ 		bcm63xx_dsp_register(&board.dsp);
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -79,12 +79,14 @@ static struct platform_device bcm63xx_eh
+ 	},
+ };
+ 
+-int __init bcm63xx_ehci_register(void)
++int __init bcm63xx_ehci_register(unsigned int num_ports)
+ {
+ 	if (!BCMCPU_IS_6318() && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
+ 		!BCMCPU_IS_6362() && !BCMCPU_IS_6368() && !BCMCPU_IS_63268())
+ 		return 0;
+ 
++	bcm63xx_ehci_pdata.num_ports = num_ports;	
++
+ 	ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
+ 	ehci_resources[0].end = ehci_resources[0].start;
+ 	ehci_resources[0].end += RSET_EHCI_SIZE - 1;
+--- a/arch/mips/bcm63xx/dev-usb-ohci.c
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -62,7 +62,6 @@ static struct usb_ohci_pdata bcm63xx_ohc
+ 	.big_endian_desc	= 1,
+ 	.big_endian_mmio	= 1,
+ 	.no_big_frame_no	= 1,
+-	.num_ports		= 1,
+ 	.power_on		= bcm63xx_ohci_power_on,
+ 	.power_off		= bcm63xx_ohci_power_off,
+ 	.power_suspend		= bcm63xx_ohci_power_off,
+@@ -80,11 +79,13 @@ static struct platform_device bcm63xx_oh
+ 	},
+ };
+ 
+-int __init bcm63xx_ohci_register(void)
++int __init bcm63xx_ohci_register(unsigned int num_ports)
+ {
+ 	if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
+ 		return -ENODEV;
+ 
++	bcm63xx_ohci_pdata.num_ports = num_ports;
++
+ 	ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
+ 	ohci_resources[0].end = ohci_resources[0].start;
+ 	ohci_resources[0].end += RSET_OHCI_SIZE - 1;
diff --git a/target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch b/target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch
new file mode 100644
index 0000000..e007ddd
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/351-set-board-usbh-ports.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -634,6 +634,7 @@ static struct board_info __initdata boar
+ 	.has_ohci0 = 1,
+ 	.has_pccard = 1,
+ 	.has_ehci0 = 1,
++	.num_usbh_ports			= 2,
+ 
+ 	.leds = {
+ 		{
diff --git a/target/linux/brcm63xx/patches-3.14/400-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-3.14/400-bcm963xx_flashmap.patch
new file mode 100644
index 0000000..1594a06
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/400-bcm963xx_flashmap.patch
@@ -0,0 +1,65 @@
+From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
+From: Axel Gembe <ago@bastart.eu.org>
+Date: Mon, 12 May 2008 18:54:09 +0200
+Subject: [PATCH] bcm963xx: flashmap support
+
+Signed-off-by: Axel Gembe <ago@bastart.eu.org>
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
+ drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
+ drivers/mtd/redboot.c                     |   13 +++++++++--
+ 3 files changed, 38 insertions(+), 26 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -32,7 +32,7 @@ static struct mtd_partition mtd_partitio
+ 	}
+ };
+ 
+-static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
++static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
+ 
+ static struct physmap_flash_data flash_data = {
+ 	.width			= 2,
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
+ 	int nulllen = 0;
+ 	int numslots;
+ 	unsigned long offset;
++	unsigned long fis_origin = 0;
+ #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
+ 	static char nullstring[] = "unallocated";
+ #endif
+@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru
+ 		goto out;
+ 	}
+ 
++	if (data && data->origin) {
++		fis_origin = data->origin;
++	} else {
++		for (i = 0; i < numslots; i++) {
++			if (!strncmp(buf[i].name, "RedBoot", 8)) {
++				fis_origin = ((buf[i].flash_base & (master->size << 1)) - 1);
++			}
++		}
++	}
++
+ 	for (i = 0; i < numslots; i++) {
+ 		struct fis_list *new_fl, **prev;
+ 
+@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru
+ 			goto out;
+ 		}
+ 		new_fl->img = &buf[i];
+-		if (data && data->origin)
+-			buf[i].flash_base -= data->origin;
+-		else
+-			buf[i].flash_base &= master->size-1;
++		if (fis_origin)
++			buf[i].flash_base -= fis_origin;
++
++		buf[i].flash_base &= (master->size << 1) - 1;
+ 
+ 		/* I'm sure the JFFS2 code has done me permanent damage.
+ 		 * I now think the following is _normal_
diff --git a/target/linux/brcm63xx/patches-3.14/401-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-3.14/401-bcm963xx_real_rootfs_length.patch
new file mode 100644
index 0000000..caf8b95
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/401-bcm963xx_real_rootfs_length.patch
@@ -0,0 +1,27 @@
+--- a/include/uapi/linux/bcm963xx_tag.h
++++ b/include/uapi/linux/bcm963xx_tag.h
+@@ -85,8 +85,10 @@ struct bcm_tag {
+ 	__u32 rootfs_crc;
+ 	/* 224-227: CRC32 of kernel partition */
+ 	__u32 kernel_crc;
+-	/* 228-235: Unused at present */
+-	char reserved1[8];
++	/* 228-231: Image sequence number */
++	char image_sequence[4];
++	/* 222-235: Openwrt: real rootfs length */
++	__u32 real_rootfs_length;
+ 	/* 236-239: CRC32 of header excluding last 20 bytes */
+ 	__u32 header_crc;
+ 	/* 240-255: Unused at present */
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -110,7 +110,8 @@ static int bcm63xx_parse_cfe_partitions(
+ 		} else {
+ 			/* OpenWrt layout */
+ 			rootfsaddr = kerneladdr + kernellen;
+-			rootfslen = spareaddr - rootfsaddr;
++			rootfslen = buf->real_rootfs_length;
++			spareaddr = rootfsaddr + rootfslen;
+ 		}
+ 	} else {
+ 		pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
diff --git a/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
new file mode 100644
index 0000000..fc2e8ab
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/402_bcm63xx_enet_vlan_incoming_fixed.patch
@@ -0,0 +1,11 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -1633,7 +1633,7 @@ static int compute_hw_mtu(struct bcm_ene
+ 	actual_mtu = mtu;
+ 
+ 	/* add ethernet header + vlan tag size */
+-	actual_mtu += VLAN_ETH_HLEN;
++	actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
+ 
+ 	if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
+ 		return -EINVAL;
diff --git a/target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch
new file mode 100644
index 0000000..4af96da
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/403-6358-enet1-external-mii-clk.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -912,6 +912,8 @@ void __init board_prom_init(void)
+ 		if (BCMCPU_IS_6348())
+ 			val |= GPIO_MODE_6348_G3_EXT_MII |
+ 				GPIO_MODE_6348_G0_EXT_MII;
++		else if (BCMCPU_IS_6358())
++			val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
+ 	}
+ 
+ 	bcm_gpio_writel(val, GPIO_MODE_REG);
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -650,6 +650,8 @@
+ #define GPIO_MODE_6358_EXTRA_SPI_SS	(1 << 7)
+ #define GPIO_MODE_6358_SERIAL_LED	(1 << 10)
+ #define GPIO_MODE_6358_UTOPIA		(1 << 12)
++#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
++#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
+ 
+ #define GPIO_MODE_6368_ANALOG_AFE_0	(1 << 0)
+ #define GPIO_MODE_6368_ANALOG_AFE_1	(1 << 1)
diff --git a/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
new file mode 100644
index 0000000..d8405f5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
@@ -0,0 +1,169 @@
+From b11218c750ab92cfab4408a0328f1b36ceec3f33 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Fri, 6 Jan 2012 12:24:18 +0100
+Subject: [PATCH 19/63] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
+
+Only connect/disconnect the phy during probe and remove, not during any
+open/close. The phy seldom changes during the runtime, and disconnecting
+the phy during close will prevent it from keeping any configuration over
+a down/up cycle.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c |   84 +++++++++++++-------------
+ 1 files changed, 41 insertions(+), 43 deletions(-)
+
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi
+ 	struct bcm_enet_priv *priv;
+ 	struct sockaddr addr;
+ 	struct device *kdev;
+-	struct phy_device *phydev;
+ 	int i, ret;
+ 	unsigned int size;
+-	char phy_id[MII_BUS_ID_SIZE + 3];
+ 	void *p;
+ 	u32 val;
+ 
+@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi
+ 	kdev = &priv->pdev->dev;
+ 
+ 	if (priv->has_phy) {
+-		/* connect to PHY */
+-		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
+-			 priv->mii_bus->id, priv->phy_id);
+-
+-		phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
+-				     PHY_INTERFACE_MODE_MII);
+-
+-		if (IS_ERR(phydev)) {
+-			dev_err(kdev, "could not attach to PHY\n");
+-			return PTR_ERR(phydev);
+-		}
+-
+-		/* mask with MAC supported features */
+-		phydev->supported &= (SUPPORTED_10baseT_Half |
+-				      SUPPORTED_10baseT_Full |
+-				      SUPPORTED_100baseT_Half |
+-				      SUPPORTED_100baseT_Full |
+-				      SUPPORTED_Autoneg |
+-				      SUPPORTED_Pause |
+-				      SUPPORTED_MII);
+-		phydev->advertising = phydev->supported;
+-
+-		if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
+-			phydev->advertising |= SUPPORTED_Pause;
+-		else
+-			phydev->advertising &= ~SUPPORTED_Pause;
+-
+-		dev_info(kdev, "attached PHY at address %d [%s]\n",
+-			 phydev->addr, phydev->drv->name);
+-
++		/* Reset state */
+ 		priv->old_link = 0;
+ 		priv->old_duplex = -1;
+ 		priv->old_pause = -1;
+-		priv->phydev = phydev;
+ 	}
+ 
+ 	/* mask all interrupts and request them */
+@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi
+ 
+ 	ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
+ 	if (ret)
+-		goto out_phy_disconnect;
++		return ret;
+ 
+ 	ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
+ 			  dev->name, dev);
+@@ -1127,9 +1095,6 @@ out_freeirq_rx:
+ out_freeirq:
+ 	free_irq(dev->irq, dev);
+ 
+-out_phy_disconnect:
+-	phy_disconnect(priv->phydev);
+-
+ 	return ret;
+ }
+ 
+@@ -1234,12 +1199,6 @@ static int bcm_enet_stop(struct net_devi
+ 	free_irq(priv->irq_rx, dev);
+ 	free_irq(dev->irq, dev);
+ 
+-	/* release phy */
+-	if (priv->has_phy) {
+-		phy_disconnect(priv->phydev);
+-		priv->phydev = NULL;
+-	}
+-
+ 	return 0;
+ }
+ 
+@@ -1834,6 +1793,8 @@ static int bcm_enet_probe(struct platfor
+ 
+ 	/* MII bus registration */
+ 	if (priv->has_phy) {
++		struct phy_device *phydev;
++		char phy_id[MII_BUS_ID_SIZE + 3];
+ 
+ 		priv->mii_bus = mdiobus_alloc();
+ 		if (!priv->mii_bus) {
+@@ -1871,6 +1832,38 @@ static int bcm_enet_probe(struct platfor
+ 			dev_err(&pdev->dev, "unable to register mdio bus\n");
+ 			goto out_free_mdio;
+ 		}
++
++		/* connect to PHY */
++		snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
++			 priv->mii_bus->id, priv->phy_id);
++
++		phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link,
++				     PHY_INTERFACE_MODE_MII);
++
++		if (IS_ERR(phydev)) {
++			dev_err(&pdev->dev, "could not attach to PHY\n");
++			goto out_unregister_mdio;
++		}
++
++		/* mask with MAC supported features */
++		phydev->supported &= (SUPPORTED_10baseT_Half |
++				      SUPPORTED_10baseT_Full |
++				      SUPPORTED_100baseT_Half |
++				      SUPPORTED_100baseT_Full |
++				      SUPPORTED_Autoneg |
++				      SUPPORTED_Pause |
++				      SUPPORTED_MII);
++		phydev->advertising = phydev->supported;
++
++		if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
++			phydev->advertising |= SUPPORTED_Pause;
++		else
++			phydev->advertising &= ~SUPPORTED_Pause;
++
++		dev_info(&pdev->dev, "attached PHY at address %d [%s]\n",
++			 phydev->addr, phydev->drv->name);
++
++		priv->phydev = phydev;
+ 	} else {
+ 
+ 		/* run platform code to initialize PHY device */
+@@ -1916,6 +1909,9 @@ static int bcm_enet_probe(struct platfor
+ 	return 0;
+ 
+ out_unregister_mdio:
++	if (priv->phydev)
++		phy_disconnect(priv->phydev);
++
+ 	if (priv->mii_bus)
+ 		mdiobus_unregister(priv->mii_bus);
+ 
+@@ -1957,6 +1953,8 @@ static int bcm_enet_remove(struct platfo
+ 	enet_writel(priv, 0, ENET_MIISC_REG);
+ 
+ 	if (priv->has_phy) {
++		phy_disconnect(priv->phydev);
++		priv->phydev = NULL;
+ 		mdiobus_unregister(priv->mii_bus);
+ 		mdiobus_free(priv->mii_bus);
+ 	} else {
diff --git a/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
new file mode 100644
index 0000000..52c75a8
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
@@ -0,0 +1,53 @@
+From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 15 Jul 2012 20:08:57 +0200
+Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
+
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
+ drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
+ 2 files changed, 25 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -966,6 +966,19 @@
+ #define ENETSW_PORTOV_FDX_MASK		(1 << 1)
+ #define ENETSW_PORTOV_LINKUP_MASK	(1 << 0)
+ 
++/* Port RGMII control register */
++#define ENETSW_RGMII_CTRL_REG(x)	(0x60 + (x))
++#define ENETSW_RGMII_CTRL_GMII_CLK_EN	(1 << 7)
++#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
++#define ENETSW_RGMII_CTRL_MII_MODE_MASK	(3 << 4)
++#define ENETSW_RGMII_CTRL_RGMII_MODE	(0 << 4)
++#define ENETSW_RGMII_CTRL_MII_MODE	(1 << 4)
++#define ENETSW_RGMII_CTRL_RVMII_MODE	(2 << 4)
++#define ENETSW_RGMII_CTRL_TIMING_SEL_EN	(1 << 0)
++
++/* Port RGMII timing register */
++#define ENETSW_RGMII_TIMING_REG(x)	(0x68 + (x))
++
+ /* MDIO control register */
+ #define ENETSW_MDIOC_REG		(0xb0)
+ #define ENETSW_MDIOC_EXT_MASK		(1 << 16)
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -2228,6 +2228,18 @@ static int bcm_enetsw_open(struct net_de
+ 		priv->sw_port_link[i] = 0;
+ 	}
+ 
++	/* enable external ports */
++	for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
++		u8 rgmii_ctrl;
++
++		if (!priv->used_ports[i].used)
++			continue;
++
++		rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
++		rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
++		enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
++	}
++
+ 	/* reset mib */
+ 	val = enetsw_readb(priv, ENETSW_GMCR_REG);
+ 	val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
new file mode 100644
index 0000000..ccad2e8
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
@@ -0,0 +1,133 @@
+From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 3 Jul 2011 15:00:38 +0200
+Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/dev-flash.c                     |   33 +++++++++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
+ 2 files changed, 33 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -16,9 +16,12 @@
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
+ #include <linux/mtd/physmap.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/flash.h>
+ 
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
++#include <bcm63xx_dev_hsspi.h>
+ #include <bcm63xx_regs.h>
+ #include <bcm63xx_io.h>
+ 
+@@ -57,6 +60,21 @@ static struct platform_device mtd_dev =
+ 	},
+ };
+ 
++static struct flash_platform_data bcm63xx_flash_data = {
++	.part_probe_types	= bcm63xx_part_types,
++};
++
++static struct spi_board_info bcm63xx_spi_flash_info[] = {
++	{
++		.bus_num	= 0,
++		.chip_select	= 0,
++		.mode		= 0,
++		.max_speed_hz	= 781000,
++		.modalias	= "m25p80",
++		.platform_data	= &bcm63xx_flash_data,
++	},
++};
++
+ static int __init bcm63xx_detect_flash_type(void)
+ {
+ 	u32 val;
+@@ -64,9 +82,15 @@ static int __init bcm63xx_detect_flash_t
+ 	switch (bcm63xx_get_cpu_id()) {
+ 	case BCM6318_CPU_ID:
+ 		/* only support serial flash */
++		bcm63xx_spi_flash_info[0].max_speed_hz = 62500000;
+ 		return BCM63XX_FLASH_TYPE_SERIAL;
+ 	case BCM6328_CPU_ID:
+ 		val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
++		if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
++			bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
++		else
++			bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
++
+ 		if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
+ 			return BCM63XX_FLASH_TYPE_SERIAL;
+ 		else
+@@ -85,12 +109,20 @@ static int __init bcm63xx_detect_flash_t
+ 			return BCM63XX_FLASH_TYPE_SERIAL;
+ 	case BCM6362_CPU_ID:
+ 		val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
++		if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
++			bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
++		else
++			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+ 		if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
+ 			return BCM63XX_FLASH_TYPE_SERIAL;
+ 		else
+ 			return BCM63XX_FLASH_TYPE_NAND;
+ 	case BCM6368_CPU_ID:
+ 		val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
++		if (val & STRAPBUS_6368_SPI_CLK_FAST)
++			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+ 		switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
+ 		case STRAPBUS_6368_BOOT_SEL_NAND:
+ 			return BCM63XX_FLASH_TYPE_NAND;
+@@ -101,6 +133,11 @@ static int __init bcm63xx_detect_flash_t
+ 		}
+ 	case BCM63268_CPU_ID:
+ 		val = bcm_misc_readl(MISC_STRAPBUS_63268_REG);
++		if (val & STRAPBUS_63268_HSSPI_CLK_FAST)
++			bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
++		else
++			bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
+ 		if (val & STRAPBUS_63268_BOOT_SEL_SERIAL)
+ 			return BCM63XX_FLASH_TYPE_SERIAL;
+ 		else
+@@ -167,8 +204,15 @@ int __init bcm63xx_flash_register(void)
+ 
+ 		return platform_device_register(&mtd_dev);
+ 	case BCM63XX_FLASH_TYPE_SERIAL:
+-		pr_warn("unsupported serial flash detected\n");
+-		return -ENODEV;
++		if (BCMCPU_IS_6318() || BCMCPU_IS_6328() || BCMCPU_IS_6362() ||
++		    BCMCPU_IS_63268())
++			bcm63xx_spi_flash_info[0].bus_num = 1;
++
++		if (BCMCPU_IS_6358() || BCMCPU_IS_6368())
++			bcm63xx_flash_data.max_transfer_len = SPI_6358_MSG_DATA_SIZE;
++
++		return spi_register_board_info(bcm63xx_spi_flash_info,
++					ARRAY_SIZE(bcm63xx_spi_flash_info));
+ 	case BCM63XX_FLASH_TYPE_NAND:
+ 		pr_warn("unsupported NAND flash detected\n");
+ 		return -ENODEV;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -707,6 +707,7 @@
+ #define GPIO_STRAPBUS_REG		0x40
+ #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
+ #define STRAPBUS_6358_BOOT_SEL_SERIAL	(0 << 1)
++#define STRAPBUS_6368_SPI_CLK_FAST	(1 << 6)
+ #define STRAPBUS_6368_BOOT_SEL_MASK	0x3
+ #define STRAPBUS_6368_BOOT_SEL_NAND	0
+ #define STRAPBUS_6368_BOOT_SEL_SERIAL	1
+@@ -1577,6 +1578,7 @@
+ #define IDDQ_CTRL_63268_USBH		(1 << 4)
+ 
+ #define MISC_STRAPBUS_6328_REG		0x240
++#define STRAPBUS_6328_HSSPI_CLK_FAST	(1 << 4)
+ #define STRAPBUS_6328_FCVO_SHIFT	7
+ #define STRAPBUS_6328_FCVO_MASK		(0x1f << STRAPBUS_6328_FCVO_SHIFT)
+ #define STRAPBUS_6328_BOOT_SEL_SERIAL	(1 << 28)
diff --git a/target/linux/brcm63xx/patches-3.14/412-MTD-physmap-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.14/412-MTD-physmap-allow-passing-pp_data.patch
new file mode 100644
index 0000000..3511120
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/412-MTD-physmap-allow-passing-pp_data.patch
@@ -0,0 +1,41 @@
+From 266c506f4b262bd6aba0776a03d82c98e65d9906 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 1 May 2012 17:32:36 +0200
+Subject: [PATCH 63/79] MTD: physmap: allow passing pp_data
+
+---
+ drivers/mtd/maps/physmap.c  |    4 +++-
+ include/linux/mtd/physmap.h |    1 +
+ 2 files changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -96,6 +96,7 @@ static int physmap_flash_probe(struct pl
+ {
+ 	struct physmap_flash_data *physmap_data;
+ 	struct physmap_flash_info *info;
++	struct mtd_part_parser_data *pp_data;
+ 	const char * const *probe_type;
+ 	const char * const *part_types;
+ 	int err = 0;
+@@ -187,8 +188,9 @@ static int physmap_flash_probe(struct pl
+ 	spin_lock_init(&info->vpp_lock);
+ 
+ 	part_types = physmap_data->part_probe_types ? : part_probe_types;
++	pp_data = physmap_data->pp_data ? physmap_data->pp_data : NULL;
+ 
+-	mtd_device_parse_register(info->cmtd, part_types, NULL,
++	mtd_device_parse_register(info->cmtd, part_types, pp_data,
+ 				  physmap_data->parts, physmap_data->nr_parts);
+ 	return 0;
+ 
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -31,6 +31,7 @@ struct physmap_flash_data {
+ 	char                    *probe_type;
+ 	struct mtd_partition	*parts;
+ 	const char * const	*part_probe_types;
++	struct mtd_part_parser_data *pp_data;
+ };
+ 
+ #endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
new file mode 100644
index 0000000..7991fad
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
@@ -0,0 +1,81 @@
+From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 3 May 2012 14:40:03 +0200
+Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
+ arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
+ 2 files changed, 18 insertions(+), 1 deletion(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -33,6 +33,7 @@
+ #include <bcm63xx_dev_usb_ohci.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
++#include <pci_ath9k_fixup.h>
+ 
+ #include <uapi/linux/bcm933xx_hcs.h>
+ #include <uapi/linux/bcm963xx_tag.h>
+@@ -969,6 +970,7 @@ int __init board_register_devices(void)
+ 	int button_count = 0;
+ 	int led_count = 0;
+ 	int usbh_ports = 0;
++	int i;
+ 
+ 	if (board.has_uart0)
+ 		bcm63xx_uart_register(0);
+@@ -1014,7 +1016,8 @@ int __init board_register_devices(void)
+ 	 * do this after registering enet devices
+ 	 */
+ #ifdef CONFIG_SSB_PCIHOST
+-	if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
++	if (!board.has_caldata &&
++	    !bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
+ 		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ 		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
+ 		if (ssb_arch_register_fallback_sprom(
+@@ -1061,5 +1064,9 @@ int __init board_register_devices(void)
+ 		platform_device_register(&bcm63xx_gpio_keys_device);
+ 	}
+ 
++	/* register any fixups */
++	for (i = 0; i < board.has_caldata; i++)
++		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
++
+ 	return 0;
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -8,6 +8,7 @@
+ #include <bcm63xx_dev_enet.h>
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_dev_dsp.h>
++#include <pci_ath9k_fixup.h>
+ 
+ /*
+  * flash mapping
+@@ -15,6 +16,11 @@
+ #define BCM963XX_CFE_VERSION_OFFSET	0x570
+ #define BCM963XX_NVRAM_OFFSET		0x580
+ 
++struct ath9k_caldata {
++	unsigned int	slot;
++	u32		caldata_offset;
++};
++
+ /*
+  * board definition
+  */
+@@ -34,6 +40,10 @@ struct board_info {
+ 	unsigned int	has_dsp:1;
+ 	unsigned int	has_uart0:1;
+ 	unsigned int	has_uart1:1;
++	unsigned int	has_caldata:2;
++
++	/* wifi calibration data config */
++	struct ath9k_caldata caldata[2];
+ 
+ 	/* ethernet config */
+ 	struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch
new file mode 100644
index 0000000..63f9802
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/414-MTD-m25p80-allow-passing-pp_data.patch
@@ -0,0 +1,40 @@
+From 7f17dfe9009beb07a3de0e380932a725293829df Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 1 May 2012 17:33:03 +0200
+Subject: [PATCH 64/79] MTD: m25p80: allow passing pp_data
+
+---
+ drivers/mtd/devices/m25p80.c |    3 +++
+ include/linux/spi/flash.h    |    2 ++
+ 2 files changed, 5 insertions(+)
+
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -1149,6 +1149,9 @@ static int m25p_probe(struct spi_device
+ 			dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
+ 	}
+ 
++	if (data && data->pp_data)
++		memcpy(&ppdata, data->pp_data, sizeof(ppdata));
++
+ 	info = (void *)id->driver_data;
+ 
+ 	if (info->jedec_id) {
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -12,6 +12,7 @@ struct mtd_part_parser_data;
+  *	with chips that can't be queried for JEDEC or other IDs
+  * @part_probe_types: optional list of MTD parser names to use for
+  *	partitioning
++ * @pp_data: optional partition parser data.
+  *
+  * @max_transfer_len: option maximum read/write length limitation for
+  *	SPI controllers not able to transfer any length commands.
+@@ -30,6 +31,7 @@ struct flash_platform_data {
+ 	char		*type;
+ 
+ 	const char	**part_probe_types;
++	struct mtd_part_parser_data *pp_data;
+ 
+ 	unsigned int	max_transfer_len;
+ 	/* we'll likely add more ... use JEDEC IDs, etc */
diff --git a/target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch b/target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
new file mode 100644
index 0000000..bde8961
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/415-MIPS-BCM63XX-export-the-attached-flash-type.patch
@@ -0,0 +1,31 @@
+From 066f1e37742ee434496d32a41a9284458de96742 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 13 Jan 2014 12:12:30 +0100
+Subject: [PATCH] MIPS: BCM63XX: export the attached flash type
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ arch/mips/bcm63xx/dev-flash.c                          | 5 +++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 ++
+ 2 files changed, 7 insertions(+)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -222,3 +222,8 @@ int __init bcm63xx_flash_register(void)
+ 		return -ENODEV;
+ 	}
+ }
++
++int bcm63xx_flash_get_type(void)
++{
++	return flash_type;
++}
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -11,4 +11,6 @@ void bcm63xx_flash_detect(void);
+ 
+ int __init bcm63xx_flash_register(void);
+ 
++int bcm63xx_flash_get_type(void);
++
+ #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-3.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
new file mode 100644
index 0000000..af06428
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
@@ -0,0 +1,229 @@
+From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 3 May 2012 14:36:11 +0200
+Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
+
+---
+ arch/mips/bcm63xx/Makefile                         |    3 +-
+ arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
+ 3 files changed, 199 insertions(+), 1 deletion(-)
+ create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,7 @@ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o
+ 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+ 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+ 		   dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
+-		   usb-common.o
++		   pci-ath9k-fixup.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+ 
+ obj-y		+= boards/
+--- /dev/null
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -0,0 +1,192 @@
++/*
++ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
++ *
++ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
++ *
++ *  Based on
++ *
++ *  Atheros AP94 reference board PCI initialization
++ *
++ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/pci.h>
++#include <linux/delay.h>
++#include <linux/ath9k_platform.h>
++
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_nvram.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_flash.h>
++#include <bcm63xx_dev_hsspi.h>
++#include <pci_ath9k_fixup.h>
++
++#define bcm_hsspi_writel(v, o)	bcm_rset_writel(RSET_HSSPI, (v), (o))
++
++struct ath9k_fixup {
++	unsigned slot;
++	u8 mac[ETH_ALEN];
++	struct ath9k_platform_data pdata;
++};
++
++static int ath9k_num_fixups;
++static struct ath9k_fixup ath9k_fixups[2] = {
++	{
++		.slot = 255,
++		.pdata = {
++			.led_pin	= -1,
++		},
++	},
++	{
++		.slot = 255,
++		.pdata = {
++			.led_pin	= -1,
++		},
++	},
++};
++
++static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
++{
++	u32 addr;
++
++	if (BCMCPU_IS_6328()) {
++		addr = 0x18000000;
++	} else {
++		addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
++		addr &= MPI_CSBASE_BASE_MASK;
++	}
++
++	switch (bcm63xx_flash_get_type()) {
++	case BCM63XX_FLASH_TYPE_PARALLEL:
++		memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++		return eeprom;
++	case BCM63XX_FLASH_TYPE_SERIAL:
++		/* the first megabyte is memory mapped */
++		if (offset < 0x100000) {
++			memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++			return eeprom;
++		}
++
++		if (BCMCPU_IS_6328()) {
++			/* we can change the memory mapped megabyte */
++			bcm_hsspi_writel(offset & 0xf00000, 0x18);
++			memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
++			bcm_hsspi_writel(0, 0x18);
++			return eeprom;
++		}
++		/* can't do anything here without talking to the SPI controller. */
++	case BCM63XX_FLASH_TYPE_NAND:
++	default:
++		return NULL;
++	}
++}
++
++static void ath9k_pci_fixup(struct pci_dev *dev)
++{
++	void __iomem *mem;
++	struct ath9k_platform_data *pdata = NULL;
++	u16 *cal_data = NULL;
++	u16 cmd;
++	u32 bar0;
++	u32 val;
++	unsigned i;
++
++	for (i = 0; i < ath9k_num_fixups; i++) {
++		if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
++			continue;
++
++		cal_data = ath9k_fixups[i].pdata.eeprom_data;
++		pdata = &ath9k_fixups[i].pdata;
++		break;
++	}
++
++	if (cal_data == NULL)
++		return;
++
++	if (*cal_data != 0xa55a) {
++		pr_err("pci %s: invalid calibration data\n", pci_name(dev));
++		return;
++	}
++
++	pr_info("pci %s: fixup device configuration\n", pci_name(dev));
++
++	switch (bcm63xx_get_cpu_id()) {
++	case BCM6328_CPU_ID:
++		val = BCM_PCIE_MEM_BASE_PA_6328;
++		break;
++	case BCM6348_CPU_ID:
++	case BCM6358_CPU_ID:
++	case BCM6368_CPU_ID:
++		val = BCM_PCI_MEM_BASE_PA;
++		break;
++	default:
++		BUG();
++	}
++
++	mem = ioremap(val, 0x10000);
++	if (!mem) {
++		pr_err("pci %s: ioremap error\n", pci_name(dev));
++		return;
++	}
++
++	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++	pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
++	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
++
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++	cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
++	pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++	/* set offset to first reg address */
++	cal_data += 3;
++	while(*cal_data != 0xffff) {
++		u32 reg;
++		reg = *cal_data++;
++		val = *cal_data++;
++		val |= (*cal_data++) << 16;
++
++		writel(val, mem + reg);
++		udelay(100);
++	}
++
++	pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
++	dev->vendor = val & 0xffff;
++	dev->device = (val >> 16) & 0xffff;
++
++	pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
++	dev->revision = val & 0xff;
++	dev->class = val >> 8; /* upper 3 bytes */
++
++	pci_read_config_word(dev, PCI_COMMAND, &cmd);
++	cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
++	pci_write_config_word(dev, PCI_COMMAND, cmd);
++
++	pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
++
++	iounmap(mem);
++
++	dev->dev.platform_data = pdata;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
++
++void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
++{
++	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
++		return;
++
++	ath9k_fixups[ath9k_num_fixups].slot = slot;
++
++	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
++		return;
++
++	if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
++		return;
++
++	ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
++	ath9k_num_fixups++;
++}
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -0,0 +1,7 @@
++#ifndef _PCI_ATH9K_FIXUP
++#define _PCI_ATH9K_FIXUP
++
++
++void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
++
++#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.14/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch b/target/linux/brcm63xx/patches-3.14/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
new file mode 100644
index 0000000..3b02c07
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
@@ -0,0 +1,120 @@
+Allow bcm63xxpart to receive a caldata offset if calibration data is
+contained in flash.
+---
+ drivers/mtd/bcm63xxpart.c      |   51 ++++++++++++++++++++++++++++++++++++---
+ include/linux/mtd/partitions.h |    2 +
+ 2 files changed, 49 insertions(+), 4 deletions(-)
+
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -53,10 +53,12 @@ static int bcm63xx_parse_cfe_partitions(
+ 	struct mtd_partition *parts;
+ 	int ret;
+ 	size_t retlen;
+-	unsigned int rootfsaddr, kerneladdr, spareaddr;
++	unsigned int rootfsaddr, kerneladdr, spareaddr, nvramaddr;
+ 	unsigned int rootfslen, kernellen, sparelen, totallen;
+ 	unsigned int cfelen, nvramlen;
+ 	unsigned int cfe_erasesize;
++	unsigned int caldatalen1 = 0, caldataaddr1 = 0;
++	unsigned int caldatalen2 = 0, caldataaddr2 = 0;
+ 	int i;
+ 	u32 computed_crc;
+ 	bool rootfs_first = false;
+@@ -70,6 +72,24 @@ static int bcm63xx_parse_cfe_partitions(
+ 	cfelen = cfe_erasesize;
+ 	nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
+ 	nvramlen = roundup(nvramlen, cfe_erasesize);
++	nvramaddr = master->size - nvramlen;
++
++	if (data) {
++		if (data->caldata[0]) {
++			caldatalen1 = cfe_erasesize;
++			caldataaddr1 = rounddown(data->caldata[0],
++						 cfe_erasesize);
++		}
++		if (data->caldata[1]) {
++			caldatalen2 = cfe_erasesize;
++			caldataaddr2 = rounddown(data->caldata[1],
++						 cfe_erasesize);
++		}
++		if (caldataaddr1 == caldataaddr2) {
++			caldataaddr2 = 0;
++			caldatalen2 = 0;
++		}
++	}
+ 
+ 	/* Allocate memory for buffer */
+ 	buf = vmalloc(sizeof(struct bcm_tag));
+@@ -121,7 +141,7 @@ static int bcm63xx_parse_cfe_partitions(
+ 		rootfsaddr = 0;
+ 		spareaddr = cfelen;
+ 	}
+-	sparelen = master->size - spareaddr - nvramlen;
++	sparelen = min_not_zero(nvramaddr, caldataaddr1) - spareaddr;
+ 
+ 	/* Determine number of partitions */
+ 	if (rootfslen > 0)
+@@ -130,6 +150,12 @@ static int bcm63xx_parse_cfe_partitions(
+ 	if (kernellen > 0)
+ 		nrparts++;
+ 
++	if (caldatalen1 > 0)
++		nrparts++;
++
++	if (caldatalen2 > 0)
++		nrparts++;
++
+ 	/* Ask kernel for more memory */
+ 	parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
+ 	if (!parts) {
+@@ -167,15 +193,32 @@ static int bcm63xx_parse_cfe_partitions(
+ 		curpart++;
+ 	}
+ 
++	if (caldatalen1 > 0) {
++		if (caldatalen2 > 0)
++			parts[curpart].name = "cal_data1";
++		else
++			parts[curpart].name = "cal_data";
++		parts[curpart].offset = caldataaddr1;
++		parts[curpart].size = caldatalen1;
++		curpart++;
++	}
++
++	if (caldatalen2 > 0) {
++		parts[curpart].name = "cal_data2";
++		parts[curpart].offset = caldataaddr2;
++		parts[curpart].size = caldatalen2;
++		curpart++;
++	}
++
+ 	parts[curpart].name = "nvram";
+-	parts[curpart].offset = master->size - nvramlen;
++	parts[curpart].offset = nvramaddr;
+ 	parts[curpart].size = nvramlen;
+ 	curpart++;
+ 
+ 	/* Global partition "linux" to make easy firmware upgrade */
+ 	parts[curpart].name = "linux";
+ 	parts[curpart].offset = cfelen;
+-	parts[curpart].size = master->size - cfelen - nvramlen;
++	parts[curpart].size = min_not_zero(nvramaddr, caldataaddr1) - cfelen;
+ 
+ 	for (i = 0; i < nrparts; i++)
+ 		pr_info("Partition %d is %s offset %llx and length %llx\n", i,
+--- a/include/linux/mtd/partitions.h
++++ b/include/linux/mtd/partitions.h
+@@ -56,10 +56,12 @@ struct device_node;
+ /**
+  * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
+  * @origin: for RedBoot, start address of MTD device
++ * @caldata: for CFE, start address of wifi calibration data
+  * @of_node: for OF parsers, device node containing partitioning information
+  */
+ struct mtd_part_parser_data {
+ 	unsigned long origin;
++	unsigned long caldata[2];
+ 	struct device_node *of_node;
+ };
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch b/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
new file mode 100644
index 0000000..6f913dd
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
@@ -0,0 +1,83 @@
+From 977f8a30103b9c4992cab8f49357fe0d4274004f Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 3 May 2012 14:55:26 +0200
+Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c              |    2 +-
+ arch/mips/bcm63xx/dev-flash.c                          |    9 ++++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |    4 +++-
+ 3 files changed, 12 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1036,7 +1036,7 @@ int __init board_register_devices(void)
+ 	if (board.num_spis)
+ 		spi_register_board_info(board.spis, board.num_spis);
+ 
+-	bcm63xx_flash_register();
++	bcm63xx_flash_register(board.has_caldata, board.caldata);
+ 
+ 	/* count number of LEDs defined by this device */
+ 	while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -35,12 +35,15 @@ static struct mtd_partition mtd_partitio
+ 	}
+ };
+ 
++static struct mtd_part_parser_data bcm63xx_parser_data;
++
+ static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
+ 
+ static struct physmap_flash_data flash_data = {
+ 	.width			= 2,
+ 	.parts			= mtd_partitions,
+ 	.part_probe_types	= bcm63xx_part_types,
++	.pp_data		= &bcm63xx_parser_data,
+ };
+ 
+ static struct resource mtd_resources[] = {
+@@ -62,6 +65,7 @@ static struct platform_device mtd_dev =
+ 
+ static struct flash_platform_data bcm63xx_flash_data = {
+ 	.part_probe_types	= bcm63xx_part_types,
++	.pp_data		= &bcm63xx_parser_data,
+ };
+ 
+ static struct spi_board_info bcm63xx_spi_flash_info[] = {
+@@ -189,9 +193,13 @@ void __init bcm63xx_flash_detect(void)
+ 	}
+ }
+ 
+-int __init bcm63xx_flash_register(void)
++int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
+ {
+ 	u32 val;
++	unsigned int i;
++
++	for (i = 0; i < num_caldata; i++)
++		bcm63xx_parser_data.caldata[i] = caldata[i].caldata_offset;
+ 
+ 	switch (flash_type) {
+ 	case BCM63XX_FLASH_TYPE_PARALLEL:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -1,6 +1,8 @@
+ #ifndef __BCM63XX_FLASH_H
+ #define __BCM63XX_FLASH_H
+ 
++#include <board_bcm963xx.h>
++
+ enum {
+ 	BCM63XX_FLASH_TYPE_PARALLEL,
+ 	BCM63XX_FLASH_TYPE_SERIAL,
+@@ -9,7 +11,7 @@ enum {
+ 
+ void bcm63xx_flash_detect(void);
+ 
+-int __init bcm63xx_flash_register(void);
++int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
+ 
+ int bcm63xx_flash_get_type(void);
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch
new file mode 100644
index 0000000..cbceaa9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/420-BCM63XX-add-endian-check-for-ath9k.patch
@@ -0,0 +1,51 @@
+--- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -2,6 +2,7 @@
+ #define _PCI_ATH9K_FIXUP
+ 
+ 
+-void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
++void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
++	unsigned endian_check) __init;
+ 
+ #endif /* _PCI_ATH9K_FIXUP */
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -19,6 +19,7 @@
+ struct ath9k_caldata {
+ 	unsigned int	slot;
+ 	u32		caldata_offset;
++	unsigned int	endian_check:1;
+ };
+ 
+ /*
+--- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -174,12 +174,14 @@ static void ath9k_pci_fixup(struct pci_d
+ }
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+ 
+-void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
++void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
++	unsigned endian_check)
+ {
+ 	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+ 		return;
+ 
+ 	ath9k_fixups[ath9k_num_fixups].slot = slot;
++	ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
+ 
+ 	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
+ 		return;
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1066,7 +1066,8 @@ int __init board_register_devices(void)
+ 
+ 	/* register any fixups */
+ 	for (i = 0; i < board.has_caldata; i++)
+-		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
++		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
++			board.caldata[i].endian_check);
+ 
+ 	return 0;
+ }
diff --git a/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch
new file mode 100644
index 0000000..f4821b6
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/421-BCM63XX-add-led-pin-for-ath9k.patch
@@ -0,0 +1,49 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1067,7 +1067,7 @@ int __init board_register_devices(void)
+ 	/* register any fixups */
+ 	for (i = 0; i < board.has_caldata; i++)
+ 		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
+-			board.caldata[i].endian_check);
++			board.caldata[i].endian_check, board.caldata[i].led_pin);
+ 
+ 	return 0;
+ }
+--- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
++++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
+@@ -175,13 +175,14 @@ static void ath9k_pci_fixup(struct pci_d
+ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
+ 
+ void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
+-	unsigned endian_check)
++	unsigned endian_check, int led_pin)
+ {
+ 	if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
+ 		return;
+ 
+ 	ath9k_fixups[ath9k_num_fixups].slot = slot;
+ 	ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
++	ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
+ 
+ 	if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
+ 		return;
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -20,6 +20,7 @@ struct ath9k_caldata {
+ 	unsigned int	slot;
+ 	u32		caldata_offset;
+ 	unsigned int	endian_check:1;
++	int		led_pin;
+ };
+ 
+ /*
+--- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
+@@ -3,6 +3,6 @@
+ 
+ 
+ void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
+-	unsigned endian_check) __init;
++	unsigned endian_check, int led_pin) __init;
+ 
+ #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
new file mode 100644
index 0000000..877b517
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
@@ -0,0 +1,206 @@
+From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 7 Jan 2013 17:45:39 +0100
+Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
+
+---
+ arch/mips/bcm63xx/Makefile                         |    2 +-
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
+ arch/mips/bcm63xx/dev-flash.c                      |    2 +-
+ arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
+ .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
+ 7 files changed, 104 insertions(+), 8 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
+
+--- a/arch/mips/bcm63xx/Makefile
++++ b/arch/mips/bcm63xx/Makefile
+@@ -2,7 +2,7 @@ obj-y		+= clk.o cpu.o cs.o gpio.o irq.o
+ 		   setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
+ 		   dev-pcmcia.o dev-rng.o dev-spi.o dev-hsspi.o dev-uart.o \
+ 		   dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
+-		   pci-ath9k-fixup.o usb-common.o
++		   pci-ath9k-fixup.o pci-rt2x00-fixup.o usb-common.o
+ obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
+ 
+ obj-y		+= boards/
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -34,6 +34,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <board_bcm963xx.h>
+ #include <pci_ath9k_fixup.h>
++#include <pci_rt2x00_fixup.h>
+ 
+ #include <uapi/linux/bcm933xx_hcs.h>
+ #include <uapi/linux/bcm963xx_tag.h>
+@@ -1065,9 +1066,19 @@ int __init board_register_devices(void)
+ 	}
+ 
+ 	/* register any fixups */
+-	for (i = 0; i < board.has_caldata; i++)
+-		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
+-			board.caldata[i].endian_check, board.caldata[i].led_pin);
++	for (i = 0; i < board.has_caldata; i++) {
++		switch (board.caldata[i].vendor) {
++		case PCI_VENDOR_ID_ATHEROS:
++			pci_enable_ath9k_fixup(board.caldata[i].slot,
++				board.caldata[i].caldata_offset, board.caldata[i].endian_check,
++				board.caldata[i].led_pin);
++			break;
++		case PCI_VENDOR_ID_RALINK:
++			pci_enable_rt2x00_fixup(board.caldata[i].slot,
++				board.caldata[i].eeprom);
++			break;
++		}
++	}
+ 
+ 	return 0;
+ }
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -193,7 +193,7 @@ void __init bcm63xx_flash_detect(void)
+ 	}
+ }
+ 
+-int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
++int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata)
+ {
+ 	u32 val;
+ 	unsigned int i;
+--- /dev/null
++++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
+@@ -0,0 +1,72 @@
++/*
++ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
++ *
++ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
++ *
++ *  Based on
++ *
++ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
++ *
++ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/if_ether.h>
++#include <linux/pci.h>
++#include <linux/platform_device.h>
++#include <linux/rt2x00_platform.h>
++
++#include <bcm63xx_nvram.h>
++#include <pci_rt2x00_fixup.h>
++
++struct rt2x00_fixup {
++	unsigned slot;
++	u8 mac[ETH_ALEN];
++	struct rt2x00_platform_data pdata;
++};
++
++static int rt2x00_num_fixups;
++static struct rt2x00_fixup rt2x00_fixups[2] = {
++	{
++		.slot = 255,
++	},
++	{
++		.slot = 255,
++	},
++};
++
++static void rt2x00_pci_fixup(struct pci_dev *dev)
++{
++	unsigned i;
++	struct rt2x00_platform_data *pdata = NULL;
++
++	for (i = 0; i < rt2x00_num_fixups; i++) {
++		if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
++			continue;
++
++		pdata = &rt2x00_fixups[i].pdata;
++		break;
++	}
++
++	dev->dev.platform_data = pdata;
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
++
++void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
++{
++	if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
++		return;
++
++	rt2x00_fixups[rt2x00_num_fixups].slot = slot;
++	rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
++
++	if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
++		return;
++
++	rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
++	rt2x00_num_fixups++;
++}
++
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
+@@ -11,7 +11,7 @@ enum {
+ 
+ void bcm63xx_flash_detect(void);
+ 
+-int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
++int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata);
+ 
+ int bcm63xx_flash_get_type(void);
+ 
+--- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
++++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
+@@ -9,6 +9,7 @@
+ #include <bcm63xx_dev_usb_usbd.h>
+ #include <bcm63xx_dev_dsp.h>
+ #include <pci_ath9k_fixup.h>
++#include <pci_rt2x00_fixup.h>
+ 
+ /*
+  * flash mapping
+@@ -16,11 +17,15 @@
+ #define BCM963XX_CFE_VERSION_OFFSET	0x570
+ #define BCM963XX_NVRAM_OFFSET		0x580
+ 
+-struct ath9k_caldata {
++struct bcm63xx_caldata {
++	unsigned int	vendor;
+ 	unsigned int	slot;
+ 	u32		caldata_offset;
++	/* Atheros */
+ 	unsigned int	endian_check:1;
+ 	int		led_pin;
++	/* Ralink */
++	char*		eeprom;
+ };
+ 
+ /*
+@@ -45,7 +50,7 @@ struct board_info {
+ 	unsigned int	has_caldata:2;
+ 
+ 	/* wifi calibration data config */
+-	struct ath9k_caldata caldata[2];
++	struct bcm63xx_caldata caldata[2];
+ 
+ 	/* ethernet config */
+ 	struct bcm63xx_enet_platform_data enet0;
+--- /dev/null
++++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
+@@ -0,0 +1,9 @@
++#ifndef _PCI_RT2X00_FIXUP
++#define _PCI_RT2X00_FIXUP
++
++#define PCI_VENDOR_ID_RALINK 0x1814
++
++void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
++
++#endif /* _PCI_RT2X00_FIXUP */
++
diff --git a/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch
new file mode 100644
index 0000000..271119c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/423-bcm63xx_enet_add_b53_support.patch
@@ -0,0 +1,169 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+@@ -336,6 +336,9 @@ struct bcm_enet_priv {
+ 	struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
+ 	int sw_port_link[ENETSW_MAX_PORT];
+ 
++	/* platform device for associated switch */
++	struct platform_device *b53_device;
++
+ 	/* used to poll switch port state */
+ 	struct timer_list swphy_poll;
+ 	spinlock_t enetsw_mdio_lock;
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -30,6 +30,7 @@
+ #include <linux/dma-mapping.h>
+ #include <linux/platform_device.h>
+ #include <linux/if_vlan.h>
++#include <linux/platform_data/b53.h>
+ 
+ #include <bcm63xx_dev_enet.h>
+ #include "bcm63xx_enet.h"
+@@ -1978,7 +1979,8 @@ static int bcm_enet_remove(struct platfo
+ 	return 0;
+ }
+ 
+-struct platform_driver bcm63xx_enet_driver = {
++
++static struct platform_driver bcm63xx_enet_driver = {
+ 	.probe	= bcm_enet_probe,
+ 	.remove	= bcm_enet_remove,
+ 	.driver	= {
+@@ -1987,6 +1989,42 @@ struct platform_driver bcm63xx_enet_driv
+ 	},
+ };
+ 
++struct b53_platform_data bcm63xx_b53_pdata = {
++	.chip_id = 0x6300,
++	.big_endian = 1,
++};
++
++struct platform_device bcm63xx_b53_dev = {
++	.name		= "b53-switch",
++	.id		= -1,
++	.dev		= {
++		.platform_data = &bcm63xx_b53_pdata,
++	},
++};
++
++static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
++{
++	int ret;
++
++	bcm63xx_b53_pdata.regs = priv->base;
++	bcm63xx_b53_pdata.enabled_ports = port_mask;
++	bcm63xx_b53_pdata.alias = priv->net_dev->name;
++
++	ret = platform_device_register(&bcm63xx_b53_dev);
++	if (!ret)
++		priv->b53_device = &bcm63xx_b53_dev;
++
++	return ret;
++}
++
++static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
++{
++	if (priv->b53_device)
++		platform_device_unregister(&bcm63xx_b53_dev);
++
++	priv->b53_device = NULL;
++}
++
+ /*
+  * switch mii access callbacks
+  */
+@@ -2240,29 +2278,6 @@ static int bcm_enetsw_open(struct net_de
+ 		enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
+ 	}
+ 
+-	/* reset mib */
+-	val = enetsw_readb(priv, ENETSW_GMCR_REG);
+-	val |= ENETSW_GMCR_RST_MIB_MASK;
+-	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
+-	mdelay(1);
+-	val &= ~ENETSW_GMCR_RST_MIB_MASK;
+-	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
+-	mdelay(1);
+-
+-	/* force CPU port state */
+-	val = enetsw_readb(priv, ENETSW_IMPOV_REG);
+-	val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
+-	enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
+-
+-	/* enable switch forward engine */
+-	val = enetsw_readb(priv, ENETSW_SWMODE_REG);
+-	val |= ENETSW_SWMODE_FWD_EN_MASK;
+-	enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
+-
+-	/* enable jumbo on all ports */
+-	enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
+-	enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
+-
+ 	/* initialize flow control buffer allocation */
+ 	enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
+ 			ENETDMA_BUFALLOC_REG(priv->rx_chan));
+@@ -2722,6 +2737,9 @@ static int bcm_enetsw_probe(struct platf
+ 	struct bcm63xx_enetsw_platform_data *pd;
+ 	struct resource *res_mem;
+ 	int ret, irq_rx, irq_tx;
++	unsigned i, num_ports = 0;
++	u16 port_mask = BIT(8);
++	u8 val;
+ 
+ 	/* stop if shared driver failed, assume driver->probe will be
+ 	 * called in the same order we register devices (correct ?)
+@@ -2811,6 +2829,43 @@ static int bcm_enetsw_probe(struct platf
+ 	priv->pdev = pdev;
+ 	priv->net_dev = dev;
+ 
++	/* reset mib */
++	val = enetsw_readb(priv, ENETSW_GMCR_REG);
++	val |= ENETSW_GMCR_RST_MIB_MASK;
++	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
++	mdelay(1);
++	val &= ~ENETSW_GMCR_RST_MIB_MASK;
++	enetsw_writeb(priv, val, ENETSW_GMCR_REG);
++	mdelay(1);
++
++	/* force CPU port state */
++	val = enetsw_readb(priv, ENETSW_IMPOV_REG);
++	val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
++	enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
++
++	/* enable switch forward engine */
++	val = enetsw_readb(priv, ENETSW_SWMODE_REG);
++	val |= ENETSW_SWMODE_FWD_EN_MASK;
++	enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
++
++	/* enable jumbo on all ports */
++	enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
++	enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
++
++	for (i = 0; i < priv->num_ports; i++) {
++		struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
++
++		if (!port->used)
++			continue;
++
++		num_ports++;
++		port_mask |= BIT(i);
++	}
++
++	/* only register if there is more than one external port */
++	if (num_ports > 1)
++		bcmenet_switch_register(priv, port_mask);
++
+ 	return 0;
+ 
+ out_put_clk:
+@@ -2839,6 +2894,9 @@ static int bcm_enetsw_remove(struct plat
+ 	priv = netdev_priv(dev);
+ 	unregister_netdev(dev);
+ 
++	/* remove switch */
++	bcmenet_switch_unregister(priv);
++
+ 	/* release device resources */
+ 	iounmap(priv->base);
+ 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch
new file mode 100644
index 0000000..24dd27a
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/424-bcm63xx_enet_no_request_mem_region.patch
@@ -0,0 +1,15 @@
+--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+@@ -2784,12 +2784,6 @@ static int bcm_enetsw_probe(struct platf
+ 	if (ret)
+ 		goto out;
+ 
+-	if (!request_mem_region(res_mem->start, resource_size(res_mem),
+-				"bcm63xx_enetsw")) {
+-		ret = -EBUSY;
+-		goto out;
+-	}
+-
+ 	priv->base = ioremap(res_mem->start, resource_size(res_mem));
+ 	if (priv->base == NULL) {
+ 		ret = -ENOMEM;
diff --git a/target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch b/target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch
new file mode 100644
index 0000000..ffeb8c9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/500-board-D4PW.patch
@@ -0,0 +1,67 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -555,6 +555,56 @@ static struct board_info __initdata boar
+ 
+ 	.has_ohci0 = 1,
+ };
++
++static struct board_info __initdata board_96348_D4PW = {
++	.name				= "D-4P-W",
++	.expected_cpu_id		= 0x6348,
++
++	.has_enet1			= 1,
++	.has_pci			= 1,
++	.has_uart0 			= 1,
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "D-4P-W:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++		},
++		{
++			.name		= "D-4P-W::status",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "D-4P-W:green:internet",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "D-4P-W:red:internet",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 7,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -733,6 +783,7 @@ static const struct board_info __initcon
+ 	&board_DV201AMR,
+ 	&board_96348gw_a,
+ 	&board_rta1025w_16,
++	&board_96348_D4PW,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/501-board-NB4.patch b/target/linux/brcm63xx/patches-3.14/501-board-NB4.patch
new file mode 100644
index 0000000..3a7fee1
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/501-board-NB4.patch
@@ -0,0 +1,661 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -15,6 +15,10 @@
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/spi_gpio.h>
++#if 0 /* FIXME: 3.14 removed non-DT support */
++#include <linux/spi/74x164.h>
++#endif
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -49,6 +53,12 @@
+ #define CFE_OFFSET_64K			0x10000
+ #define CFE_OFFSET_128K			0x20000
+ 
++#define NB4_PID_OFFSET		0xff80
++#define NB4_74X164_GPIO_BASE	64
++#define NB4_SPI_GPIO_MOSI	7
++#define NB4_SPI_GPIO_CLK	6
++#define NB4_74HC64_GPIO(X)	(NB4_74X164_GPIO_BASE + (X))
++
+ static struct board_info board;
+ 
+ /*
+@@ -755,6 +765,605 @@ static struct board_info __initdata boar
+ 
+ 	.has_ohci0			= 1,
+ };
++
++struct spi_gpio_platform_data nb4_spi_gpio_data = {
++	.sck		= NB4_SPI_GPIO_CLK,
++	.mosi		= NB4_SPI_GPIO_MOSI,
++	.miso		= SPI_GPIO_NO_MISO,
++	.num_chipselect	= 1,
++};
++
++
++static struct platform_device nb4_spi_gpio = {
++	.name = "spi_gpio",
++	.id   = 1,
++	.dev = {
++		.platform_data = &nb4_spi_gpio_data,
++	},
++};
++
++static struct platform_device * __initdata nb4_devices[] = {
++	&nb4_spi_gpio,
++};
++
++#if 0 /* FIXME: 3.14 removed non-DT support */
++const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = {
++	.base = NB4_74X164_GPIO_BASE
++};
++#endif
++
++static struct spi_board_info nb4_spi_devices[] = {
++#if 0 /* FIXME: 3.14 removed non-DT support */
++	{
++		.modalias = "74x164",
++		.max_speed_hz = 781000,
++		.bus_num = 1,
++		.controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
++		.mode = SPI_MODE_0,
++		.platform_data = &nb4_74x164_platform_data
++	}
++#endif
++};
++
++static struct board_info __initdata board_nb4_ser_r0 = {
++	.name				= "NB4-SER-r0",
++	.expected_cpu_id		= 0x6358,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++
++	.has_ohci0 = 1,
++	.has_pccard = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports			= 2,
++
++	.leds = {
++		{
++			.name		= "NB4-SER-r0:white:adsl",
++			.gpio		= NB4_74HC64_GPIO(4),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r0:white:traffic",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r0:white:tel",
++			.gpio		= NB4_74HC64_GPIO(3),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r0:white:tv",
++			.gpio		= NB4_74HC64_GPIO(2),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r0:white:wifi",
++			.gpio		= 15,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r0:white:alarm",
++			.gpio		= NB4_74HC64_GPIO(0),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r0:red:service",
++			.gpio		= 29,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r0:green:service",
++			.gpio		= 30,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r0:blue:service",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 34,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 37,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "service",
++			.gpio		= 27,
++			.type		= EV_KEY,
++			.code		= BTN_0,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "clip",
++			.gpio		= 31,
++			.type		= EV_KEY,
++			.code		= BTN_1,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++	.devs = nb4_devices,
++	.num_devs = ARRAY_SIZE(nb4_devices),
++	.spis = nb4_spi_devices,
++	.num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_ser_r1 = {
++	.name				= "NB4-SER-r1",
++	.expected_cpu_id		= 0x6358,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++
++	.has_ohci0 = 1,
++	.has_pccard = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports			= 2,
++
++	.leds = {
++		{
++			.name		= "NB4-SER-r1:white:adsl",
++			.gpio		= NB4_74HC64_GPIO(4),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r1:white:traffic",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r1:white:tel",
++			.gpio		= NB4_74HC64_GPIO(3),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r1:white:tv",
++			.gpio		= NB4_74HC64_GPIO(2),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r1:white:wifi",
++			.gpio		= 15,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r1:white:alarm",
++			.gpio		= NB4_74HC64_GPIO(0),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r1:red:service",
++			.gpio		= 29,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r1:green:service",
++			.gpio		= 30,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r1:blue:service",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 34,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 37,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "service",
++			.gpio		= 27,
++			.type		= EV_KEY,
++			.code		= BTN_0,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "clip",
++			.gpio		= 31,
++			.type		= EV_KEY,
++			.code		= BTN_1,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++	.devs = nb4_devices,
++	.num_devs = ARRAY_SIZE(nb4_devices),
++	.spis = nb4_spi_devices,
++	.num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_ser_r2 = {
++	.name				= "NB4-SER-r2",
++	.expected_cpu_id		= 0x6358,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++
++	.has_ohci0 = 1,
++	.has_pccard = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports			= 2,
++
++	.leds = {
++		{
++			.name		= "NB4-SER-r2:white:adsl",
++			.gpio		= NB4_74HC64_GPIO(4),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r2:white:traffic",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r2:white:tel",
++			.gpio		= NB4_74HC64_GPIO(3),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r2:white:tv",
++			.gpio		= NB4_74HC64_GPIO(2),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r2:white:wifi",
++			.gpio		= 15,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r2:white:alarm",
++			.gpio		= NB4_74HC64_GPIO(0),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r2:red:service",
++			.gpio		= 29,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r2:green:service",
++			.gpio		= 30,
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-SER-r2:blue:service",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 34,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 37,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "service",
++			.gpio		= 27,
++			.type		= EV_KEY,
++			.code		= BTN_0,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "clip",
++			.gpio		= 31,
++			.type		= EV_KEY,
++			.code		= BTN_1,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++	.devs = nb4_devices,
++	.num_devs = ARRAY_SIZE(nb4_devices),
++	.spis = nb4_spi_devices,
++	.num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_fxc_r1 = {
++	.name				= "NB4-FXC-r1",
++	.expected_cpu_id		= 0x6358,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++
++	.has_ohci0 = 1,
++	.has_pccard = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports			= 2,
++
++	.leds = {
++		{
++			.name		= "NB4-FXC-r1:white:adsl",
++			.gpio		= NB4_74HC64_GPIO(4),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-FXC-r1:white:traffic",
++			.gpio		= 2,
++		},
++		{
++			.name		= "NB4-FXC-r1:white:tel",
++			.gpio		= NB4_74HC64_GPIO(3),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-FXC-r1:white:tv",
++			.gpio		= NB4_74HC64_GPIO(2),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-FXC-r1:white:wifi",
++			.gpio		= 15,
++		},
++		{
++			.name		= "NB4-FXC-r1:white:alarm",
++			.gpio		= NB4_74HC64_GPIO(0),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-FXC-r1:red:service",
++			.gpio		= 29,
++		},
++		{
++			.name		= "NB4-FXC-r1:green:service",
++			.gpio		= 30,
++		},
++		{
++			.name		= "NB4-FXC-r1:blue:service",
++			.gpio		= 4,
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 34,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 37,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "service",
++			.gpio		= 27,
++			.type		= EV_KEY,
++			.code		= BTN_0,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "clip",
++			.gpio		= 31,
++			.type		= EV_KEY,
++			.code		= BTN_1,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++	.devs = nb4_devices,
++	.num_devs = ARRAY_SIZE(nb4_devices),
++	.spis = nb4_spi_devices,
++	.num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
++
++static struct board_info __initdata board_nb4_fxc_r2 = {
++	.name				= "NB4-FXC-r2",
++	.expected_cpu_id		= 0x6358,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++
++	.has_ohci0 = 1,
++	.has_pccard = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports			= 2,
++
++	.leds = {
++		{
++			.name		= "NB4-FXC-r2:white:adsl",
++			.gpio		= NB4_74HC64_GPIO(4),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-FXC-r2:white:traffic",
++			.gpio		= 2,
++		},
++		{
++			.name		= "NB4-FXC-r2:white:tel",
++			.gpio		= NB4_74HC64_GPIO(3),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-FXC-r2:white:tv",
++			.gpio		= NB4_74HC64_GPIO(2),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-FXC-r2:white:wifi",
++			.gpio		= 15,
++		},
++		{
++			.name		= "NB4-FXC-r2:white:alarm",
++			.gpio		= NB4_74HC64_GPIO(0),
++			.active_low	= 1,
++		},
++		{
++			.name		= "NB4-FXC-r2:red:service",
++			.gpio		= 29,
++		},
++		{
++			.name		= "NB4-FXC-r2:green:service",
++			.gpio		= 30,
++		},
++		{
++			.name		= "NB4-FXC-r2:blue:service",
++			.gpio		= 4,
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 34,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 37,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "service",
++			.gpio		= 27,
++			.type		= EV_KEY,
++			.code		= BTN_0,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "clip",
++			.gpio		= 31,
++			.type		= EV_KEY,
++			.code		= BTN_1,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++	.devs = nb4_devices,
++	.num_devs = ARRAY_SIZE(nb4_devices),
++	.spis = nb4_spi_devices,
++	.num_spis = ARRAY_SIZE(nb4_spi_devices),
++};
+ #endif
+ 
+ /*
+@@ -791,6 +1400,11 @@ static const struct board_info __initcon
+ 	&board_96358vw2,
+ 	&board_AGPFS0,
+ 	&board_DWVS0,
++	&board_nb4_ser_r0,
++	&board_nb4_ser_r1,
++	&board_nb4_ser_r2,
++	&board_nb4_fxc_r1,
++	&board_nb4_fxc_r2,
+ #endif
+ };
+ 
+@@ -845,6 +1459,16 @@ static void __init boardid_fixup(u8 *boo
+ 	struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
+ 	char *board_name = (char *)bcm63xx_nvram_get_name();
+ 
++	if (BCMCPU_IS_6358() && (!strcmp(board_name, "96358VW"))) {
++		u8 *p = boot_addr + NB4_PID_OFFSET;
++
++		/* Extract nb4 PID */
++		if (!memcmp(p, "NB4-", 4)) {
++			memcpy(board_name, p, sizeof("NB4-XXX-rX"));
++			return;
++		}
++	}
++
+ 	/* check if bcm_tag is at 64k offset */
+ 	if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
+ 		/* else try 128k */
diff --git a/target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch
new file mode 100644
index 0000000..7a542cf
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/502-board-96338W2_E7T.patch
@@ -0,0 +1,51 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -228,6 +228,40 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_96338w2_e7t = {
++	.name				= "96338W2_E7T",
++	.expected_cpu_id		= 0x6338,
++
++	.has_enet0			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++		.leds = {
++		{
++			.name		= "96338W2_E7T:green:ppp",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96338W2_E7T:green:ppp-fail",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96338W2_E7T:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -1379,6 +1413,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ 	&board_96338gw,
+ 	&board_96338w,
++	&board_96338w2_e7t,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ 	&board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch b/target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch
new file mode 100644
index 0000000..bc23463
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/503-board-CPVA642.patch
@@ -0,0 +1,109 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -756,6 +756,98 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_CPVA642 = {
++	.name                           = "CPVA642",
++	.expected_cpu_id                = 0x6358,
++
++	.has_uart0			= 1,
++	.has_enet1                      = 1,
++	.has_pci                        = 1,
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100        = 1,
++		.force_duplex_full      = 1,
++ 	},
++
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++
++	.leds = {
++		{
++			.name		= "CPVA642:red:power",
++			.gpio		= 14,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA642:green:power",
++			.gpio		= 11,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "CPVA642:red:wifi",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA642:green:wifi",
++			.gpio		= 28,
++			.active_low	= 0,
++		},
++		{
++			.name		= "CPVA642:red:link",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA642:green:link",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA642:green:ether",
++			.gpio		= 1,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA642:green:phone1",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA642:green:phone2",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA642:green:usb",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++    },
++
++	.buttons = {
++		{
++			.desc           = "reset",
++			.gpio           = 36,
++			.active_low     = 1,
++			.type           = EV_KEY,
++			.code           = KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 37,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
++
+ static struct board_info __initdata board_AGPFS0 = {
+ 	.name				= "AGPF-S0",
+ 	.expected_cpu_id		= 0x6358,
+@@ -1434,6 +1526,7 @@ static const struct board_info __initcon
+ 	&board_96358vw,
+ 	&board_96358vw2,
+ 	&board_AGPFS0,
++	&board_CPVA642,
+ 	&board_DWVS0,
+ 	&board_nb4_ser_r0,
+ 	&board_nb4_ser_r1,
diff --git a/target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch
new file mode 100644
index 0000000..c52e311
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/504-board_dsl_274xb_rev_c.patch
@@ -0,0 +1,72 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -892,6 +892,61 @@ static struct board_info __initdata boar
+ 	.has_ohci0			= 1,
+ };
+ 
++/* D-Link DSL-274xB revison C2/C3 */
++static struct board_info __initdata board_dsl_274xb_rev_c = {
++	.name				= "AW4139",
++	.expected_cpu_id		= 0x6358,
++
++	.has_uart0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "dsl-274xb:green:power",
++			.gpio		= 5,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "dsl-274xb:red:power",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "dsl-274xb:green:adsl",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "dsl-274xb:green:internet",
++			.gpio		= 2,
++		},
++		{
++			.name		= "dsl-274xb:red:internet",
++			.gpio		= 10,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 34,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ struct spi_gpio_platform_data nb4_spi_gpio_data = {
+ 	.sck		= NB4_SPI_GPIO_CLK,
+ 	.mosi		= NB4_SPI_GPIO_MOSI,
+@@ -1528,6 +1583,7 @@ static const struct board_info __initcon
+ 	&board_AGPFS0,
+ 	&board_CPVA642,
+ 	&board_DWVS0,
++	&board_dsl_274xb_rev_c,
+ 	&board_nb4_ser_r0,
+ 	&board_nb4_ser_r1,
+ 	&board_nb4_ser_r2,
diff --git a/target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch b/target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch
new file mode 100644
index 0000000..986d4db
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/505-board_spw500v.patch
@@ -0,0 +1,78 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -649,6 +649,67 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_spw500v = {
++	.name				= "SPW500V",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++
++	.has_dsp			= 1,
++	.dsp = {
++		.gpio_rst		= 6,
++		.gpio_int		= 34,
++		.ext_irq		= 2,
++		.cs			= 2,
++	},
++
++	.leds = {
++		{
++			.name		= "SPW500V:red:power",
++			.gpio		= 1,
++			.active_low	= 1,
++		},
++		{
++			.name		= "SPW500V:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "SPW500V:green:ppp",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{	.name		= "SPW500V:green:pstn",
++			.gpio		= 28,
++			.active_low	= 1,
++		},
++		{
++			.name		= "SPW500V:green:voip",
++			.gpio		= 32,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 33,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -1575,6 +1636,7 @@ static const struct board_info __initcon
+ 	&board_96348gw_a,
+ 	&board_rta1025w_16,
+ 	&board_96348_D4PW,
++	&board_spw500v,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch
new file mode 100644
index 0000000..108a354
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/506-board_gw6200_gw6000.patch
@@ -0,0 +1,124 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -516,6 +516,112 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_gw6200 = {
++	.name				= "GW6200",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++	.enet1 = {
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.has_ohci0 = 1,
++
++	.has_dsp			= 1,
++		.dsp = {
++		.gpio_rst		= 8, /* FIXME: What is real GPIO here? */
++		.gpio_int		= 34,
++		.ext_irq		= 2,
++		.cs			= 2,
++	},
++
++	.leds = {
++		{
++			.name		= "GW6200:green:line1",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "GW6200:green:line2",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "GW6200:green:line3",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++		{
++			.name		= "GW6200:green:tel",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 36,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
++static struct board_info __initdata board_gw6000 = {
++	.name				= "GW6000",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++	.enet1 = {
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.has_ohci0 = 1,
++
++	.has_dsp			= 1,
++	.dsp = {
++		.gpio_rst		= 6,
++		.gpio_int		= 34,
++		.ext_irq		= 2,
++		.cs			= 2,
++	},
++
++	/* GW6000 has no GPIO-controlled leds */
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 36,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
++
++
+ static struct board_info __initdata board_FAST2404 = {
+ 	.name				= "F@ST2404",
+ 	.expected_cpu_id		= 0x6348,
+@@ -1629,6 +1735,8 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ 	&board_96348r,
+ 	&board_96348gw,
++	&board_gw6000,
++	&board_gw6200,
+ 	&board_96348gw_10,
+ 	&board_96348gw_11,
+ 	&board_FAST2404,
diff --git a/target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch b/target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch
new file mode 100644
index 0000000..465f3d3
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/507-board-MAGIC.patch
@@ -0,0 +1,89 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -816,6 +816,78 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_96348sv = {
++	.name				= "MAGIC",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++	.enet1 = {
++		/* it has BP_ENET_EXTERNAL_PHY */
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.has_ohci0			= 1,
++	.has_pccard			= 1,
++	.has_ehci0			= 1,
++
++	.has_dsp			= 1,
++	.dsp = {
++		.gpio_rst		= 25,
++		.gpio_int		= 34,
++		.cs			= 2,
++		.ext_irq		= 2,
++	},
++
++	.leds = {
++		{
++			.name		= "MAGIC:green:voip",
++			.gpio		= 22,
++			.active_low	= 1,
++		},
++		{
++			.name		= "MAGIC:green:adsl",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "MAGIC:green:wifi",
++			.gpio		= 28,
++		},
++		{
++			.name		= "MAGIC:green:usb",
++			.gpio		= 35,
++			.active_low	= 1,
++		},
++		{
++			.name		= "MAGIC:green:hpna",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "MAGIC:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "MAGIC:green:stop",
++			.gpio		= 1,
++			.active_low	= 1,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -1745,6 +1817,7 @@ static const struct board_info __initcon
+ 	&board_rta1025w_16,
+ 	&board_96348_D4PW,
+ 	&board_spw500v,
++	&board_96348sv,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/508-board_hw553.patch b/target/linux/brcm63xx/patches-3.14/508-board_hw553.patch
new file mode 100644
index 0000000..6247251
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/508-board_hw553.patch
@@ -0,0 +1,94 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1784,6 +1784,83 @@ static struct board_info __initdata boar
+ 	.spis = nb4_spi_devices,
+ 	.num_spis = ARRAY_SIZE(nb4_spi_devices),
+ };
++
++static struct board_info __initdata board_HW553 = {
++	.name                           = "HW553",
++	.expected_cpu_id                = 0x6358,
++
++	.has_uart0			= 1,
++
++	.has_enet0                      = 1,
++	.has_enet1                      = 1,
++	.has_pci                        = 1,
++
++	.enet0 = {
++		.has_phy                = 1,
++		.use_internal_phy       = 1,
++	},
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100        = 1,
++		.force_duplex_full      = 1,
++	},
++
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++	.num_usbh_ports			= 2,
++
++	.leds = {
++		{
++			.name		= "HW553:red:lan",
++			.gpio		= 34,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:blue:lan",
++			.gpio		= 35,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:red:adsl",
++			.gpio		= 22,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:blue:adsl",
++			.gpio		= 23,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:red:power",
++			.gpio		= 5,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++
++		{
++			.name		= "HW553:blue:power",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:red:wifi",
++			.gpio		= 25,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:red:internetkey",
++			.gpio		= 12,
++			.active_low	= 1,
++		},
++		{
++			.name		= "HW553:blue:internetkey",
++			.gpio		= 13,
++			.active_low	= 1,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -1832,6 +1909,7 @@ static const struct board_info __initcon
+ 	&board_nb4_ser_r2,
+ 	&board_nb4_fxc_r1,
+ 	&board_nb4_fxc_r2,
++	&board_HW553,
+ #endif
+ };
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch
new file mode 100644
index 0000000..499922c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/509-board_rta1320_16m.patch
@@ -0,0 +1,56 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -262,6 +262,45 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_rta1320_16m = {
++	.name				= "RTA1320_16M",
++	.expected_cpu_id		= 0x6338,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++		.leds = {
++		{
++			.name		= "RTA1320_16M:green:adsl",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "RTA1320_16M:green:ppp",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "RTA1320_16M:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "RTA1320_16M:green:stop",
++			.gpio		= 1,
++			.active_low	= 1,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -1877,6 +1916,7 @@ static const struct board_info __initcon
+ 	&board_96338gw,
+ 	&board_96338w,
+ 	&board_96338w2_e7t,
++	&board_rta1320_16m,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ 	&board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch b/target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch
new file mode 100644
index 0000000..dd3366c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/510-board_spw303v.patch
@@ -0,0 +1,83 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1900,6 +1900,72 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++ /* T-Home Speedport W 303V Typ B */
++static struct board_info __initdata board_spw303v = {
++	.name			= "96358-502V",
++	.expected_cpu_id	= 0x6358,
++
++	.has_uart0		= 1,
++	.has_enet0		= 1,
++	.has_pci		= 1,
++
++	.enet0 = {
++		.has_phy 		= 1,
++		.use_internal_phy 	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "spw303v:green:power+adsl",
++			.gpio		= 22,
++			.active_low 	= 1,
++		},
++		{
++			.name		= "spw303v:red:power+adsl",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "spw303v:green:ppp",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "spw303v:green:ses",
++			.gpio		= 0,
++			.active_low	= 1,
++		},
++		{
++			.name		= "spw303v:green:voip",
++			.gpio		= 27,
++			.active_low	= 1,
++		},
++		{
++			.name		= "spw303v:green:pots",
++			.gpio		= 31,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 11,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "ses",
++			.gpio		= 37,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	}
++};
+ #endif
+ 
+ /*
+@@ -1950,6 +2016,7 @@ static const struct board_info __initcon
+ 	&board_nb4_fxc_r1,
+ 	&board_nb4_fxc_r2,
+ 	&board_HW553,
++	&board_spw303v,
+ #endif
+ };
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch b/target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch
new file mode 100644
index 0000000..783770e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/511-board_V2500V.patch
@@ -0,0 +1,123 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -927,6 +927,65 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_V2500V_BB = {
++	.name				= "V2500V_BB",
++        .expected_cpu_id                = 0x6348,
++
++        .has_uart0                      = 1,
++        .has_enet0                      = 1,
++        .has_enet1                      = 1,
++        .has_pci                        = 1,
++
++        .enet0 = {
++                .has_phy                = 1,
++                .use_internal_phy       = 1,
++        },
++        .enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++                .force_speed_100        = 1,
++                .force_duplex_full      = 1,
++	},
++
++	.leds =	{
++		{
++			.name		= "V2500V_BB:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "V2500V_BB:red:power",
++			.gpio		= 1,
++			.active_low	= 1,
++		},
++		{
++			.name		= "V2500V_BB:green:adsl",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{	.name		= "V2500V_BB:green:ppp",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "V2500V_BB:green:wireless",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 31,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -2001,6 +2060,7 @@ static const struct board_info __initcon
+ 	&board_96348_D4PW,
+ 	&board_spw500v,
+ 	&board_96348sv,
++	&board_V2500V_BB,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
+@@ -2122,6 +2182,22 @@ void __init board_prom_init(void)
+ 		val &= MPI_CSBASE_BASE_MASK;
+ 	}
+ 	boot_addr = (u8 *)KSEG1ADDR(val);
++	printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
++
++	/* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
++	/* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
++	/* Loading firmware from the CFE Prompt always loads to Bank 0 */
++	/* Do an early check of CFE and then select bank 0 */
++
++	if (boot_addr == (u8 *)0xbf800000) {
++		u8 *tmp_boot_addr = (u8*)0xbfc00000;
++
++		bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
++		if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
++			printk(KERN_INFO PFX "V2500V: nvram bank 0\n");
++			boot_addr = tmp_boot_addr;
++		}
++	}
+ 
+ 	/* dump cfe version */
+ 	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -19,6 +19,7 @@
+ #include <linux/spi/spi.h>
+ #include <linux/spi/flash.h>
+ 
++#include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+ #include <bcm63xx_dev_flash.h>
+ #include <bcm63xx_dev_hsspi.h>
+@@ -207,6 +208,13 @@ int __init bcm63xx_flash_register(int nu
+ 		val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+ 		val &= MPI_CSBASE_BASE_MASK;
+ 
++		/* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
++		/* Loading from CFE always uses Bank 0 */
++		if (!strcmp(board_get_name(), "V2500V_BB")) {
++			pr_info("V2500V: Start in Bank 0\n");
++			val = val + 0x400000; // Select Bank 0 start address
++		}
++
+ 		mtd_resources[0].start = val;
+ 		mtd_resources[0].end = 0x1FFFFFFF;
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch b/target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch
new file mode 100644
index 0000000..54a33ba
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/512-board_BTV2110.patch
@@ -0,0 +1,75 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -487,6 +487,64 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++
++/* BT Voyager 2110 */
++static struct board_info __initdata board_V2110 = {
++	.name				= "V2110",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name           = "V2110:green:power",
++			.gpio           = 0,
++			.active_low     = 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name           = "V2110:red:power",
++			.gpio           = 1,
++			.active_low     = 1,
++		},
++		{
++			.name           = "V2110:green:adsl",
++			.gpio           = 2,
++			.active_low     = 1,
++		},
++		{       .name           = "V2110:green:ppp",
++			.gpio           = 3,
++			.active_low     = 1,
++		},
++		{
++			.name           = "V2110:green:wireless",
++			.gpio           = 6,
++			.active_low     = 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 33,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
++
+ static struct board_info __initdata board_96348gw = {
+ 	.name				= "96348GW",
+ 	.expected_cpu_id		= 0x6348,
+@@ -2061,6 +2119,7 @@ static const struct board_info __initcon
+ 	&board_spw500v,
+ 	&board_96348sv,
+ 	&board_V2500V_BB,
++	&board_V2110,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/513-board_livebox.patch b/target/linux/brcm63xx/patches-3.14/513-board_livebox.patch
new file mode 100644
index 0000000..2323b5e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/513-board_livebox.patch
@@ -0,0 +1,390 @@
+--- a/arch/mips/bcm63xx/boards/Kconfig
++++ b/arch/mips/bcm63xx/boards/Kconfig
+@@ -8,4 +8,10 @@ config BOARD_BCM963XX
+ 	select SSB
+        help
+ 
++config BOARD_LIVEBOX
++	bool "Inventel Livebox(es) boards"
++	select SSB
++	help
++	 Inventel Livebox boards using the RedBoot bootloader.
++
+ endchoice
+--- a/arch/mips/bcm63xx/boards/Makefile
++++ b/arch/mips/bcm63xx/boards/Makefile
+@@ -1 +1,2 @@
+ obj-$(CONFIG_BOARD_BCM963XX)		+= board_bcm963xx.o
++obj-$(CONFIG_BOARD_LIVEBOX)		+= board_livebox.o
+--- /dev/null
++++ b/arch/mips/bcm63xx/boards/board_livebox.c
+@@ -0,0 +1,369 @@
++/*
++ * This file is subject to the terms and conditions of the GNU General Public
++ * License.  See the file "COPYING" in the main directory of this archive
++ * for more details.
++ *
++ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
++ */
++
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/string.h>
++#include <linux/platform_device.h>
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mtd/physmap.h>
++#include <linux/ssb/ssb.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
++#include <linux/spi/spi.h>
++#include <asm/addrspace.h>
++#include <bcm63xx_board.h>
++#include <bcm63xx_cpu.h>
++#include <bcm63xx_dev_uart.h>
++#include <bcm63xx_regs.h>
++#include <bcm63xx_io.h>
++#include <bcm63xx_dev_pci.h>
++#include <bcm63xx_dev_enet.h>
++#include <bcm63xx_dev_dsp.h>
++#include <bcm63xx_dev_pcmcia.h>
++#include <bcm63xx_dev_usb_ohci.h>
++#include <bcm63xx_dev_usb_ehci.h>
++#include <bcm63xx_dev_spi.h>
++#include <board_bcm963xx.h>
++
++#define PFX	"board_livebox: "
++
++#define LIVEBOX_KEYS_POLL_INTERVAL	20
++#define LIVEBOX_KEYS_DEBOUNCE_INTERVAL	(LIVEBOX_KEYS_POLL_INTERVAL * 3)
++
++static unsigned int mac_addr_used = 0;
++static struct board_info board;
++
++/*
++ * known 6348 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6348
++static struct board_info __initdata board_livebox_blue5g = {
++	.name				= "Livebox-blue-5g",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++
++	.enet1 = {
++		  .has_phy		= 1,
++		  .phy_id 		= 31,
++	},
++
++	.has_ohci0			= 1,
++	.has_pccard			= 1,
++
++	.has_dsp			= 0, /*TODO some Liveboxes have dsp*/
++	.dsp = {
++		.gpio_rst		= 6, /*FIXME eth1 shares gpio6 with dsp?*/
++		.gpio_int		= 35,
++		.cs			= 2,
++		.ext_irq		= 2,
++	},
++
++	.leds = {
++		{
++			.name		= "Livebox-blue-5g::adsl-fail",
++			.gpio		= 0,
++			.active_low	= 0,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "Livebox-blue-5g::adsl",
++			.gpio		= 1,
++		},
++		{
++			.name		= "Livebox-blue-5g::traffic",
++			.gpio		= 2,
++		},
++		{
++			.name		= "Livebox-blue-5g::phone",
++			.gpio		= 3,
++		},
++		{
++			.name		= "Livebox-blue-5g::wifi",
++			.gpio		= 4,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "BTN_1",
++			.gpio		= 36,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= BTN_1,
++			.debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "BTN_2",
++			.gpio		= 7,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= BTN_2,
++			.debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
++		},
++
++	},
++};
++#endif
++
++/*
++ * all boards
++ */
++static const struct board_info __initdata *bcm963xx_boards[] = {
++#ifdef CONFIG_BCM63XX_CPU_6348
++	&board_livebox_blue5g
++#endif
++};
++/*
++ * return board name for /proc/cpuinfo
++ */
++const char *board_get_name(void)
++{
++	return board.name;
++}
++
++/*
++ * register & return a new board mac address
++ */
++static int board_get_mac_address(u8 *mac)
++{
++	u8 *p;
++	int count;
++
++	memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
++
++	p = mac + ETH_ALEN - 1;
++	count = mac_addr_used;
++
++	while (count--) {
++		do {
++			(*p)++;
++			if (*p != 0)
++				break;
++			p--;
++		} while (p != mac);
++	}
++
++	if (p == mac) {
++		printk(KERN_ERR PFX "unable to fetch mac address\n");
++		return -ENODEV;
++	}
++        mac_addr_used++;
++
++	return 0;
++}
++
++/*
++ * early init callback
++ */
++#define LIVEBOX_GPIO_DETECT_MASK	0x000000ff
++#define LIVEBOX_BOOT_ADDR		0x1e400000
++
++#define LIVEBOX_HW_BLUE5G_9		0x90
++
++void __init board_prom_init(void)
++{
++	u32 val;
++	u8 hw_version;
++
++	/* Get hardware version */
++	val = bcm_gpio_readl(GPIO_CTL_LO_REG);
++	val &= ~LIVEBOX_GPIO_DETECT_MASK;
++	bcm_gpio_writel(val, GPIO_CTL_LO_REG);
++
++	hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG) & LIVEBOX_GPIO_DETECT_MASK;
++	switch (hw_version) {
++	case LIVEBOX_HW_BLUE5G_9:
++		printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
++		memcpy(&board, bcm963xx_boards[0], sizeof(board));
++		break;
++	default:
++		printk(KERN_INFO PFX "Unknown livebox version: %02x\n", hw_version);
++		break;
++	}
++
++	/* use default livebox configuration */
++	memcpy(&board, bcm963xx_boards[0], sizeof(board));
++
++	/* setup pin multiplexing depending on board enabled device,
++	 * this has to be done this early since PCI init is done
++	 * inside arch_initcall */
++	val = 0;
++
++#ifdef CONFIG_PCI
++	if (board.has_pci) {
++		bcm63xx_pci_enabled = 1;
++		if (BCMCPU_IS_6348())
++			val |= GPIO_MODE_6348_G2_PCI;
++	}
++#endif
++	if (board.has_pccard) {
++		if (BCMCPU_IS_6348())
++			val |= GPIO_MODE_6348_G1_MII_PCCARD;
++	}
++
++	if (board.has_enet0 && !board.enet0.use_internal_phy) {
++		if (BCMCPU_IS_6348())
++			val |= GPIO_MODE_6348_G3_EXT_MII |
++				GPIO_MODE_6348_G0_EXT_MII;
++	}
++
++	if (board.has_enet1 && !board.enet1.use_internal_phy) {
++		if (BCMCPU_IS_6348())
++			val |= GPIO_MODE_6348_G3_EXT_MII |
++				GPIO_MODE_6348_G0_EXT_MII;
++			printk(KERN_INFO PFX "resetting gpio6 for eth1...\n");
++			gpio_request(6, "dsp_eth_rst");
++			gpio_direction_output(6, 0);
++			gpio_set_value(6, 1);
++	}
++
++	bcm_gpio_writel(val, GPIO_MODE_REG);
++}
++
++/*
++ * second stage init callback, good time to panic if we couldn't
++ * identify on which board we're running since early printk is working
++ */
++void __init board_setup(void)
++{
++	if (!board.name[0])
++		panic("unable to detect bcm963xx board");
++	printk(KERN_INFO PFX "board name: %s\n", board.name);
++
++	/* make sure we're running on expected cpu */
++	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
++		panic("unexpected CPU for bcm963xx board");
++}
++
++static struct physmap_flash_data flash_data = {
++	.width			= 2,
++};
++
++static struct resource mtd_resources[] = {
++	{
++		.start          = 0,    /* filled at runtime */
++		.end            = 0,    /* filled at runtime */
++		.flags          = IORESOURCE_MEM,
++	}
++};
++
++static struct platform_device mtd_dev = {
++	.name			= "physmap-flash",
++	.resource		= mtd_resources,
++	.num_resources		= ARRAY_SIZE(mtd_resources),
++	.dev			= {
++		.platform_data	= &flash_data,
++	},
++};
++
++static struct gpio_led_platform_data bcm63xx_led_data;
++
++static struct platform_device bcm63xx_gpio_leds = {
++	.name			= "leds-gpio",
++	.id			= 0,
++	.dev.platform_data	= &bcm63xx_led_data,
++};
++
++static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
++	.poll_interval  = LIVEBOX_KEYS_POLL_INTERVAL,
++};
++
++static struct platform_device bcm63xx_gpio_keys_device = {
++	.name		= "gpio-keys-polled",
++	.id		= 0,
++	.dev.platform_data = &bcm63xx_gpio_keys_data,
++};
++
++/*
++ * third stage init callback, register all board devices.
++ */
++int __init board_register_devices(void)
++{
++	u32 val;
++	int led_count = 0;
++	int button_count = 0;
++
++	if (board.has_uart0)
++		bcm63xx_uart_register(0);
++
++	if (board.has_uart1)
++		bcm63xx_uart_register(1);
++
++	if (board.has_pccard)
++		bcm63xx_pcmcia_register();
++
++	if (board.has_enet0 &&
++	    !board_get_mac_address(board.enet0.mac_addr))
++		bcm63xx_enet_register(0, &board.enet0);
++
++	if (board.has_enet1 &&
++	    !board_get_mac_address(board.enet1.mac_addr))
++		bcm63xx_enet_register(1, &board.enet1);
++
++	if (board.has_ehci0)
++		bcm63xx_ehci_register();
++
++	if (board.has_ohci0)
++		bcm63xx_ohci_register();
++
++	if (board.has_dsp)
++		bcm63xx_dsp_register(&board.dsp);
++
++	bcm63xx_spi_register();
++
++	if (board.num_devs)
++		platform_add_devices(board.devs, board.num_devs);
++
++	if (board.num_spis)
++		spi_register_board_info(board.spis, board.num_spis);
++
++
++	/* read base address of boot chip select (0) */
++	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
++	val &= MPI_CSBASE_BASE_MASK;
++	if (val != LIVEBOX_BOOT_ADDR)
++		printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
++			val, LIVEBOX_BOOT_ADDR);
++	mtd_resources[0].start = LIVEBOX_BOOT_ADDR;
++	mtd_resources[0].end = 0x1ebfffff;
++
++	platform_device_register(&mtd_dev);
++
++	/* count number of LEDs defined by this device */
++	while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
++		led_count++;
++
++	bcm63xx_led_data.num_leds = led_count;
++	bcm63xx_led_data.leds = board.leds;
++
++	platform_device_register(&bcm63xx_gpio_leds);
++
++	/* count number of BUTTONs defined by this device */
++	while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
++		button_count++;
++
++	if (button_count) {
++		bcm63xx_gpio_keys_data.nbuttons = button_count;
++		bcm63xx_gpio_keys_data.buttons = board.buttons;
++
++		platform_device_register(&bcm63xx_gpio_keys_device);
++	}
++
++	return 0;
++}
diff --git a/target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch
new file mode 100644
index 0000000..5713ed6
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/514-board_ct536_ct5621.patch
@@ -0,0 +1,62 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -545,6 +545,51 @@ static struct board_info __initdata boar
+ };
+ 
+ 
++static struct board_info __initdata board_ct536_ct5621 = {
++	.name				= "CT536_CT5621",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 0,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.has_ohci0 = 1,
++	.has_pccard = 1,
++	.has_ehci0 = 1,
++
++	.leds = {
++		{
++			.name		= "CT536_CT5621:green:adsl-fail",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT536_CT5621:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 33,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_96348gw = {
+ 	.name				= "96348GW",
+ 	.expected_cpu_id		= 0x6348,
+@@ -2120,6 +2165,7 @@ static const struct board_info __initcon
+ 	&board_96348sv,
+ 	&board_V2500V_BB,
+ 	&board_V2110,
++	&board_ct536_ct5621,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch b/target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch
new file mode 100644
index 0000000..9f011d6
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/515-board_DWV-S0_fixes.patch
@@ -0,0 +1,19 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1315,6 +1315,8 @@ static struct board_info __initdata boar
+ 	.name				= "DWV-S0",
+ 	.expected_cpu_id		= 0x6358,
+ 
++	.has_uart0			= 1,
++
+ 	.has_enet0			= 1,
+ 	.has_enet1			= 1,
+ 	.has_pci			= 1,
+@@ -1330,6 +1332,7 @@ static struct board_info __initdata boar
+ 	},
+ 
+ 	.has_ohci0			= 1,
++	.has_ehci0			= 1,
+ };
+ 
+ /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch b/target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch
new file mode 100644
index 0000000..1a295db
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/516-board_96348A-122.patch
@@ -0,0 +1,80 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -590,6 +590,69 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_96348A_122 = {
++	.name				= "96348A-122",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.has_ohci0 = 1,
++
++	.leds = {
++		{
++			.name		= "96348A-122:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "96348A-122:red:alarm",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96348A-122:green:wps",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++	},
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 33,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wlan",
++			.gpio		= 34,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WLAN,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 35,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_96348gw = {
+ 	.name				= "96348GW",
+ 	.expected_cpu_id		= 0x6348,
+@@ -2169,6 +2232,7 @@ static const struct board_info __initcon
+ 	&board_V2500V_BB,
+ 	&board_V2110,
+ 	&board_ct536_ct5621,
++	&board_96348A_122,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch b/target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch
new file mode 100644
index 0000000..3a8706c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/517-RTA1205W_16_uart_fixes.patch
@@ -0,0 +1,10 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -855,6 +855,7 @@ static struct board_info __initdata boar
+ 	.name				= "RTA1025W_16",
+ 	.expected_cpu_id		= 0x6348,
+ 
++	.has_uart0			= 1,
+ 	.has_enet0			= 1,
+ 	.has_enet1			= 1,
+ 	.has_pci			= 1,
diff --git a/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch
new file mode 100644
index 0000000..98086c9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/519_board_CPVA502plus.patch
@@ -0,0 +1,57 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1153,6 +1153,46 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_CPVA502plus = {
++	.name				= "CPVA502+",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.use_internal_phy	= 1,
++	},
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "CPVA502+:green:phone",
++			.gpio		= 0,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA502+:green:link",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CPVA502+:green:feth1", /* FIXME:does gpio4 enable eth1 phy? */
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++	},
++};
++
+ #endif
+ 
+ /*
+@@ -2234,6 +2274,7 @@ static const struct board_info __initcon
+ 	&board_V2110,
+ 	&board_ct536_ct5621,
+ 	&board_96348A_122,
++	&board_CPVA502plus,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
new file mode 100644
index 0000000..524cd97
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/520-bcm63xx-add-support-for-96368MVWG-board.patch
@@ -0,0 +1,135 @@
+From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Wed, 20 Jan 2010 16:21:30 +0100
+Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
+ .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
+ 2 files changed, 97 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2238,6 +2238,85 @@ static struct board_info __initdata boar
+ #endif
+ 
+ /*
++ * known 6368 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6368
++static struct board_info __initdata board_96368mvwg = {
++	.name				= "96368MVWG",
++	.expected_cpu_id		= 0x6368,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++
++	.has_usbd			= 1,
++
++	.usbd = {
++		.use_fullspeed		= 0,
++		.port_no		= 0,
++	},
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "port1",
++			},
++
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "port2",
++			},
++
++			[4] = {
++				.used	= 1,
++				.phy_id	= 0x12,
++				.name	= "port0",
++			},
++
++			[5] = {
++				.used	= 1,
++				.phy_id	= 0x11,
++				.name	= "port3",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "96368MVWG:green:adsl",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96368MVWG:green:ppp",
++			.gpio		= 5,
++		},
++		{
++			.name		= "96368MVWG:green:power",
++			.gpio		= 22,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "96368MVWG:green:wps",
++			.gpio		= 23,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96368MVWG:red:ppp-fail",
++			.gpio		= 31,
++		},
++	},
++
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++};
++#endif
++
++/*
+  * all boards
+  */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -2292,6 +2371,10 @@ static const struct board_info __initcon
+ 	&board_HW553,
+ 	&board_spw303v,
+ #endif
++
++#ifdef CONFIG_BCM63XX_CPU_6368
++	&board_96368mvwg,
++#endif
+ };
+ 
+ /*
+@@ -2473,12 +2556,25 @@ void __init board_prom_init(void)
+ 		bcm63xx_pci_enabled = 1;
+ 		if (BCMCPU_IS_6348())
+ 			val |= GPIO_MODE_6348_G2_PCI;
++
++		if (BCMCPU_IS_6368())
++			val |= GPIO_MODE_6368_PCI_REQ1 |
++				GPIO_MODE_6368_PCI_GNT1 |
++				GPIO_MODE_6368_PCI_INTB |
++				GPIO_MODE_6368_PCI_REQ0 |
++				GPIO_MODE_6368_PCI_GNT0;
+ 	}
+ #endif
+ 
+ 	if (board.has_pccard) {
+ 		if (BCMCPU_IS_6348())
+ 			val |= GPIO_MODE_6348_G1_MII_PCCARD;
++
++		if (BCMCPU_IS_6368())
++			val |= GPIO_MODE_6368_PCMCIA_CD1 |
++				GPIO_MODE_6368_PCMCIA_CD2 |
++				GPIO_MODE_6368_PCMCIA_VS1 |
++				GPIO_MODE_6368_PCMCIA_VS2;
+ 	}
+ 
+ 	if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch
new file mode 100644
index 0000000..9fac033
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/521-bcm63xx-add-support-for-96368MVNgr-board.patch
@@ -0,0 +1,92 @@
+From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 4 Nov 2011 12:33:48 +0100
+Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   67 +++++++++++++++++++++++++++++
+ 1 files changed, 67 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2314,6 +2314,72 @@ static struct board_info __initdata boar
+ 	.has_ohci0 = 1,
+ 	.has_ehci0 = 1,
+ };
++
++static struct board_info __initdata board_96368mvngr = {
++	.name				= "96368MVNgr",
++	.expected_cpu_id		= 0x6368,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "port1",
++			},
++
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "port2",
++			},
++
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "port3",
++			},
++
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "port4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "96368MVNgr:green:adsl",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96368MVNgr:green:inet",
++			.gpio		= 5,
++		},
++		{
++			.name		= "96368MVNgr:green:power",
++			.gpio		= 22,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "96368MVNgr:green:wps",
++			.gpio		= 23,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96368MVNgr:green:inet-fail",
++			.gpio		= 3,
++		},
++	},
++
++	.has_ohci0 = 1,
++	.has_ehci0 = 1,
++};
+ #endif
+ 
+ /*
+@@ -2374,6 +2440,7 @@ static const struct board_info __initcon
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ 	&board_96368mvwg,
++	&board_96368mvngr,
+ #endif
+ };
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
new file mode 100644
index 0000000..689e370
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
@@ -0,0 +1,67 @@
+From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 29 May 2012 10:52:25 +0200
+Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   77 +++++++++++++++++++++++++++++
+ 1 files changed, 77 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -110,13 +110,45 @@ static struct board_info __initdata boar
+ 		.port_no		= 0,
+ 	},
+ 
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id = 1,
++				.name	= "Port 1",
++			},
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++		},
++	},
++
+ 	.leds = {
+ 		{
+-			.name		= "96328avng::ppp-fail",
++			.name		= "96328avng::internet-fail",
+ 			.gpio		= 2,
+ 			.active_low	= 1,
+ 		},
+ 		{
++			.name		= "96328avng::dsl",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
+ 			.name		= "96328avng::power",
+ 			.gpio		= 4,
+ 			.active_low	= 1,
+@@ -133,7 +165,7 @@ static struct board_info __initdata boar
+ 			.active_low	= 1,
+ 		},
+ 		{
+-			.name		= "96328avng::ppp",
++			.name		= "96328avng::internet",
+ 			.gpio		= 11,
+ 			.active_low	= 1,
+ 		},
diff --git a/target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
new file mode 100644
index 0000000..92a4347
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
@@ -0,0 +1,96 @@
+From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Tue, 29 May 2012 11:01:12 +0200
+Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |   71 +++++++++++++++++++++++++++++
+ 1 files changed, 71 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -171,6 +171,76 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_963281TAN = {
++	.name				= "963281TAN",
++	.expected_cpu_id		= 0x6328,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id = 1,
++				.name	= "Port 1",
++			},
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "963281TAN::internet",
++			.gpio		= 1,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963281TAN::power",
++			.gpio		= 4,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "963281TAN::internet-fail",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963281TAN::power-fail",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963281TAN::wps",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963281TAN::dsl",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++
++	},
++};
+ #endif
+ 
+ /*
+@@ -2423,6 +2493,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
++	&board_963281TAN,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ 	&board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch b/target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch
new file mode 100644
index 0000000..9d7d96e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/524-board_dsl_274xb_rev_f.patch
@@ -0,0 +1,132 @@
+From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 30 Apr 2012 09:10:51 +0200
+Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
+ DSL-274xB rev F1
+
+---
+ arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
+ 1 files changed, 104 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -241,6 +241,111 @@ static struct board_info __initdata boar
+ 
+ 	},
+ };
++
++static struct board_info __initdata board_dsl_274xb_f1 = {
++	.name				= "AW4339U",
++	.expected_cpu_id		= 0x6328,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++
++	.has_caldata			= 1,
++	.caldata = {
++		{
++			.vendor		= PCI_VENDOR_ID_ATHEROS,
++			.caldata_offset	= 0x7d1000,
++			.slot		= 0,
++			.led_pin	= -1,
++		},
++	},
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id = 1,
++				.name	= "Port 4",
++			},
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 3",
++			},
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 2",
++			},
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 1",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "dsl-274xb:red:internet",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "dsl-274xb:green:dsl",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "dsl-274xb:green:power",
++			.gpio		= 4,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "dsl-274xb:red:power",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "dsl-274xb:blue:wps",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "dsl-274xb:green:internet",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "wifi",
++			.gpio		= 10,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= BTN_0,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "reset",
++			.gpio		= 23,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 24,
++			.active_low	= 1,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -2494,6 +2599,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
+ 	&board_963281TAN,
++	&board_dsl_274xb_f1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ 	&board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch b/target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch
new file mode 100644
index 0000000..3cec302
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/525-board_96348w3.patch
@@ -0,0 +1,70 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1400,6 +1400,59 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++/* NetGear DG834G v4 */
++static struct board_info __initdata board_96348W3 = {
++ 	.name	 			= "96348W3",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0	 		= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.has_ohci0	 		= 1,
++
++	.leds = {
++		{
++			.name		= "96348W3:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "96348W3:red:power",
++			.gpio		= 1,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96348W3::adsl",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96348W3::internet",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++	},
++	.buttons = {
++			{
++			.desc		= "reset",
++			.gpio		= 6,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++			},
++	},
++};
++
+ #endif
+ 
+ /*
+@@ -2629,6 +2682,7 @@ static const struct board_info __initcon
+ 	&board_ct536_ct5621,
+ 	&board_96348A_122,
+ 	&board_CPVA502plus,
++	&board_96348W3,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch b/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch
new file mode 100644
index 0000000..71c5246
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/526-board_CT6373-1.patch
@@ -0,0 +1,142 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -59,6 +59,13 @@
+ #define NB4_SPI_GPIO_CLK	6
+ #define NB4_74HC64_GPIO(X)	(NB4_74X164_GPIO_BASE + (X))
+ 
++#define CT6373_PID_OFFSET		0xff80
++#define CT6373_74X164_GPIO_BASE	64
++#define CT6373_SPI_GPIO_MOSI	7
++#define CT6373_SPI_GPIO_CLK		6
++#define CT6373_74HC64_GPIO(X)	(CT6373_74X164_GPIO_BASE + (X))
++
++
+ static struct board_info board;
+ 
+ /*
+@@ -2353,6 +2360,117 @@ static struct board_info __initdata boar
+ 	.num_spis = ARRAY_SIZE(nb4_spi_devices),
+ };
+ 
++
++struct spi_gpio_platform_data ct6373_spi_gpio_data = {
++	.sck		= CT6373_SPI_GPIO_CLK,
++	.mosi		= CT6373_SPI_GPIO_MOSI,
++	.miso		= SPI_GPIO_NO_MISO,
++	.num_chipselect	= 1,
++};
++
++static struct platform_device ct6373_spi_gpio = {
++	.name = "spi_gpio",
++	.id   = 1,
++	.dev = {
++		.platform_data = &ct6373_spi_gpio_data,
++	},
++};
++
++static struct platform_device * __initdata ct6373_devices[] = {
++	&ct6373_spi_gpio,
++};
++
++#if 0 /* FIXME: 3.14 dropped non-DT support */
++const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
++	.base = CT6373_74X164_GPIO_BASE
++};
++#endif
++
++static struct spi_board_info ct6373_spi_devices[] = {
++#if 0 /* FIXME: 3.14 dropped non-DT support */
++	{
++		.modalias = "74x164",
++		.max_speed_hz = 781000,
++		.bus_num = 1,
++		.controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
++		.mode = SPI_MODE_0,
++		.platform_data = &ct6373_74x164_platform_data
++	}
++#endif
++};
++
++static struct board_info __initdata board_ct6373_1 = {
++	.name				= "CT6373-1",
++	.expected_cpu_id	= 0x6358,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++	.has_ohci0			= 1,
++	.has_ehci0			= 1,
++
++	.has_enet1			= 1,
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "CT6373-1:green:power",
++			.gpio		= 0,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "CT6373-1:green:usb",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT6373-1:green:wlan",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT6373-1:green:adsl",
++			.gpio		= CT6373_74HC64_GPIO(0),
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT6373-1:green:line",
++			.gpio		= CT6373_74HC64_GPIO(1),
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT6373-1:green:fxs1",
++			.gpio		= CT6373_74HC64_GPIO(2),
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT6373-1:green:fxs2",
++			.gpio		= CT6373_74HC64_GPIO(3),
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 35,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++
++	.devs = ct6373_devices,
++	.num_devs = ARRAY_SIZE(ct6373_devices),
++	.spis = ct6373_spi_devices,
++	.num_spis = ARRAY_SIZE(ct6373_spi_devices),
++};
++
+ static struct board_info __initdata board_HW553 = {
+ 	.name                           = "HW553",
+ 	.expected_cpu_id                = 0x6358,
+@@ -2697,6 +2815,7 @@ static const struct board_info __initcon
+ 	&board_nb4_ser_r2,
+ 	&board_nb4_fxc_r1,
+ 	&board_nb4_fxc_r2,
++	&board_ct6373_1,
+ 	&board_HW553,
+ 	&board_spw303v,
+ #endif
diff --git a/target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch
new file mode 100644
index 0000000..a5d8451
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/527-board_dva-g3810bn-tl-1.patch
@@ -0,0 +1,84 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2613,6 +2613,73 @@ static struct board_info __initdata boar
+ 		},
+ 	}
+ };
++
++/* D-Link DVA-G3810BN/TL */
++static struct board_info __initdata board_DVAG3810BN = {
++	.name			= "DVAG3810BN",
++	.expected_cpu_id	= 0x6358,
++
++	.has_uart0		= 1,
++	.has_enet0		= 1,
++	.has_enet1		= 1,
++	.has_pci		= 1,
++
++	.enet0 = {
++		.has_phy		= 0,
++		.use_internal_phy	= 1,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++
++	.has_ohci0		= 1,
++	.has_pccard		= 1,
++	.has_ehci0		= 1,
++
++	.leds = {
++		{
++			.name	= "DVAG3810BN::voip",
++			.gpio	= 1,
++		},
++		{
++			.name	= "DVAG3810BN::dsl",
++			.gpio	= 22,
++			.active_low  = 1,
++		},
++		{
++			.name	= "DVAG3810BN::internet",
++			.gpio	= 23,
++			.active_low  = 1,
++		},
++		{
++			.name	= "DVAG3810BN::power",
++			.gpio	= 4,
++			.default_trigger = "default-on",
++		},
++		{
++			.name	= "DVAG3810BN::stop",
++			.gpio	= 5,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc	= "reset",
++			.gpio	= 34,
++			.active_low = 1,
++			.type	= EV_KEY,
++			.code	= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -2818,6 +2885,7 @@ static const struct board_info __initcon
+ 	&board_ct6373_1,
+ 	&board_HW553,
+ 	&board_spw303v,
++	&board_DVAG3810BN,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.14/528-board_nb6.patch b/target/linux/brcm63xx/patches-3.14/528-board_nb6.patch
new file mode 100644
index 0000000..70cd2b2
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/528-board_nb6.patch
@@ -0,0 +1,147 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -19,6 +19,7 @@
+ #if 0 /* FIXME: 3.14 removed non-DT support */
+ #include <linux/spi/74x164.h>
+ #endif
++#include <linux/rtl8367.h>
+ #include <asm/addrspace.h>
+ #include <bcm63xx_board.h>
+ #include <bcm63xx_cpu.h>
+@@ -58,6 +59,8 @@
+ #define NB4_SPI_GPIO_MOSI	7
+ #define NB4_SPI_GPIO_CLK	6
+ #define NB4_74HC64_GPIO(X)	(NB4_74X164_GPIO_BASE + (X))
++#define NB6_GPIO_RTL8367_SDA	18
++#define NB6_GPIO_RTL8367_SCK	20
+ 
+ #define CT6373_PID_OFFSET		0xff80
+ #define CT6373_74X164_GPIO_BASE	64
+@@ -2682,6 +2685,104 @@ static struct board_info __initdata boar
+ };
+ #endif
+ 
++#ifdef CONFIG_BCM63XX_CPU_6362
++static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
++	.mode = RTL8367_EXTIF_MODE_RGMII,
++	.txdelay = 1,
++	.rxdelay = 5,
++	.ability = {
++		.force_mode = 1,
++		.txpause = 1,
++		.rxpause = 1,
++		.link = 1,
++		.duplex = 1,
++		.speed = RTL8367_PORT_SPEED_1000,
++	},
++};
++
++static struct rtl8367_platform_data nb6_rtl8367_data = {
++	.gpio_sda	= NB6_GPIO_RTL8367_SDA,
++	.gpio_sck	= NB6_GPIO_RTL8367_SCK,
++	.extif0_cfg	= &nb6_rtl8367_extif0_cfg,
++};
++
++static struct platform_device nb6_rtl8367_device = {
++	.name		= RTL8367_DRIVER_NAME,
++	.id		= -1,
++	.dev = {
++		.platform_data	= &nb6_rtl8367_data,
++	}
++};
++
++static struct platform_device * __initdata nb6_devices[] = {
++	&nb6_rtl8367_device,
++};
++
++static struct board_info __initdata board_nb6 = {
++	.name				= "NB6",
++	.expected_cpu_id		= 0x6362,
++
++	.has_uart0			= 1,
++
++	.has_ohci0			= 1,
++	.has_ehci0			= 1,
++	.num_usbh_ports			= 2,
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[4] = {
++				.used	= 1,
++				.phy_id	= 0xff,
++				.bypass_link = 1,
++				.force_speed = 1000,
++				.force_duplex_full = 1,
++				.name	= "RGMII",
++			},
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 24,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++			.active_low	= 1,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 25,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++			.active_low	= 1,
++		},
++		{
++			.desc		= "wlan",
++			.gpio		= 12,
++			.type		= EV_KEY,
++			.code		= KEY_WLAN,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++			.active_low	= 1,
++		},
++		{
++			.desc		= "service",
++			.gpio		= 10,
++			.type		= EV_KEY,
++			.code		= BTN_0,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++			.active_low	= 1,
++		},
++	},
++
++	.devs = nb6_devices,
++	.num_devs = ARRAY_SIZE(nb6_devices),
++};
++#endif
++
+ /*
+  * known 6368 boards
+  */
+@@ -2888,6 +2989,10 @@ static const struct board_info __initcon
+ 	&board_DVAG3810BN,
+ #endif
+ 
++#ifdef CONFIG_BCM63XX_CPU_6362
++	&board_nb6,
++#endif
++
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ 	&board_96368mvwg,
+ 	&board_96368mvngr,
+@@ -2955,6 +3060,11 @@ static void __init boardid_fixup(u8 *boo
+ 		}
+ 	}
+ 
++	if (BCMCPU_IS_6362() && (!strncmp(board_name, "NB6-", sizeof("NB6-") - 1))) {
++		board_name[sizeof("NB6") - 1] = '\0';
++		return ;
++	}
++
+ 	/* check if bcm_tag is at 64k offset */
+ 	if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
+ 		/* else try 128k */
diff --git a/target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch b/target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch
new file mode 100644
index 0000000..81e963c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/529-board_fast2604.patch
@@ -0,0 +1,68 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1068,6 +1068,57 @@ static struct board_info __initdata boar
+ 	.has_ehci0			= 1,
+ };
+ 
++static struct board_info __initdata board_FAST2604 = {
++	.name						= "F@ST2604",
++	.expected_cpu_id			= 0x6348,
++
++	.has_uart0					= 1,
++	.has_pci					= 1,
++	.has_ohci0					= 1,
++
++	.has_enet1					= 1,
++	.enet1 = {
++		.has_phy			= 1,
++		.phy_id				= 0,
++		.force_speed_100		= 1,
++		.force_duplex_full		= 1,
++	},
++
++	.leds = {
++		{
++			.name				= "F@ST2604:green:power",
++			.gpio				= 0,
++			.active_low			= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name				= "F@ST2604:red:power",
++			.gpio				= 1,
++			.active_low			= 1,
++		},
++		{
++			.name				= "F@ST2604:red:inet",
++			.gpio				= 4,
++			.active_low			= 1,
++		},
++		{
++			.name				= "F@ST2604:green:wps",
++			.gpio				= 5,
++			.active_low			= 1,
++		},
++	},
++	.buttons = {
++		{
++			.desc				= "reset",
++			.gpio				= 33,
++			.active_low			= 1,
++			.type				= EV_KEY,
++			.code				= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_rta1025w_16 = {
+ 	.name				= "RTA1025W_16",
+ 	.expected_cpu_id		= 0x6348,
+@@ -2957,6 +3008,7 @@ static const struct board_info __initcon
+ 	&board_96348gw_10,
+ 	&board_96348gw_11,
+ 	&board_FAST2404,
++	&board_FAST2604,
+ 	&board_DV201AMR,
+ 	&board_96348gw_a,
+ 	&board_rta1025w_16,
diff --git a/target/linux/brcm63xx/patches-3.14/530-board_963281T_TEF.patch b/target/linux/brcm63xx/patches-3.14/530-board_963281T_TEF.patch
new file mode 100644
index 0000000..ab2b4f3
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/530-board_963281T_TEF.patch
@@ -0,0 +1,137 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -252,6 +252,126 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_963281T_TEF = {
++	.name					= "963281T_TEF",
++	.expected_cpu_id			= 0x6328,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 1,
++	.has_enetsw				= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "Port 1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "Port 2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "Port 3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name			= "963281T_TEF:green:power",
++			.gpio			= 4,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "963281T_TEF:red:power",
++			.gpio			= 8,
++			.active_low		= 1,
++		},
++		{
++			.name			= "963281T_TEF:green:inet",
++			.gpio			= 11,
++			.active_low		= 1,
++		},
++		{
++			.name			= "963281T_TEF:red:inet",
++			.gpio			= 2,
++			.active_low		= 1,
++		},
++		{
++			.name			= "963281T_TEF:green:ppp",
++			.gpio			= 3,
++			.active_low		= 1,
++		},
++		{
++			.name			= "963281T_TEF:red:ppp",
++			.gpio			= 5,
++			.active_low		= 1,
++		},
++		{
++			.name			= "963281T_TEF:green:3g",
++			.gpio			= 6,
++			.active_low		= 1,
++		},
++		{
++			.name			= "963281T_TEF:red:3g",
++			.gpio			= 7,
++			.active_low		= 1,
++		},
++		{
++			.name			= "963281T_TEF:green:wlan",
++			.gpio			= 9,
++			.active_low		= 1,
++		},
++		{
++			.name			= "963281T_TEF:red:wlan",
++			.gpio			= 10,
++			.active_low		= 1,
++		},
++		{
++			.name			= "963281T_TEF:green:eth",
++			.gpio			= 31,
++			.active_low		= 1,
++		},
++		{
++			.name			= "963281T_TEF:red:eth",
++			.gpio			= 20,
++			.active_low		= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 23,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "wlan",
++			.gpio			= 24,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_WLAN,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_dsl_274xb_f1 = {
+ 	.name				= "AW4339U",
+ 	.expected_cpu_id		= 0x6328,
+@@ -2989,6 +3109,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
+ 	&board_963281TAN,
++	&board_963281T_TEF,
+ 	&board_dsl_274xb_f1,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-3.14/531-board_96328A-1441N1.patch b/target/linux/brcm63xx/patches-3.14/531-board_96328A-1441N1.patch
new file mode 100644
index 0000000..4076184
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/531-board_96328A-1441N1.patch
@@ -0,0 +1,90 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -182,6 +182,79 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_96328A_1441N1 = {
++	.name					= "96328A-1441N1",
++	.expected_cpu_id			= 0x6328,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 1,
++	.has_enetsw				= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "Port 1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "Port 2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "Port 3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name			= "96328A-1441N1:green:power",
++			.gpio			= 8,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "96328A-1441N1:red:power",
++			.gpio			= 4,
++		},
++		{
++			.name			= "96328A-1441N1:green:inet",
++			.gpio			= 7,
++		},
++		{
++			.name			= "96328A-1441N1:red:inet",
++			.gpio			= 1,
++		},
++		{
++			.name			= "96328A-1441N1:green:dsl",
++			.gpio			= 11,
++			.active_low		= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 23,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_963281TAN = {
+ 	.name				= "963281TAN",
+ 	.expected_cpu_id		= 0x6328,
+@@ -3108,6 +3181,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
++	&board_96328A_1441N1,
+ 	&board_963281TAN,
+ 	&board_963281T_TEF,
+ 	&board_dsl_274xb_f1,
diff --git a/target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch b/target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch
new file mode 100644
index 0000000..d13daf4
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/532-board_96328a-1241N.patch
@@ -0,0 +1,84 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -182,6 +182,73 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_96328A_1241N = {
++	.name					= "96328A-1241N",
++	.expected_cpu_id			= 0x6328,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 1,
++	.has_enetsw				= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used		= 1,
++				.phy_id		= 1,
++				.name		= "Port 1",
++			},
++			[1] = {
++				.used		= 1,
++				.phy_id		= 2,
++				.name		= "Port 2",
++			},
++			[2] = {
++				.used		= 1,
++				.phy_id		= 3,
++				.name		= "Port 3",
++			},
++			[3] = {
++				.used		= 1,
++				.phy_id		= 4,
++				.name		= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name			= "96328A-1241N:green:power",
++			.gpio			= 4,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "96328A-1241N:red:alarm",
++			.gpio			= 2,
++			.active_low		= 1,
++		},
++		{
++			.name			= "96328A-1241N:green:inet",
++			.gpio			= 3,
++			.active_low		= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 23,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_96328A_1441N1 = {
+ 	.name					= "96328A-1441N1",
+ 	.expected_cpu_id			= 0x6328,
+@@ -3181,6 +3248,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
++	&board_96328A_1241N,
+ 	&board_96328A_1441N1,
+ 	&board_963281TAN,
+ 	&board_963281T_TEF,
diff --git a/target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch b/target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch
new file mode 100644
index 0000000..5e364c9
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/533-board_rta770bw.patch
@@ -0,0 +1,66 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -790,6 +790,55 @@ static struct board_info __initdata boar
+ 
+ 	.has_uart0			= 1,
+ };
++
++static struct board_info __initdata board_rta770bw = {
++	.name				= "RTA770BW",
++	.expected_cpu_id		= 0x6345,
++
++	.has_uart0			= 1,
++
++	.has_enet0			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "RTA770BW:green:usb",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "RTA770BW:green:adsl",
++			.gpio		= 8,
++		},
++		{
++			.name		= "RTA770BW:green:diag",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++		{
++			.name		= "RTA770BW:green:wlan",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 13,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -3262,6 +3311,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ 	&board_96345gw2,
++	&board_rta770bw,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ 	&board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.14/534-board_hw556.patch b/target/linux/brcm63xx/patches-3.14/534-board_hw556.patch
new file mode 100644
index 0000000..2026aec
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/534-board_hw556.patch
@@ -0,0 +1,565 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2911,6 +2911,492 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_HW556 = {
++	.name					= "HW556",
++	.expected_cpu_id			= 0x6358,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 2,
++
++	.has_caldata				= 1,
++	.caldata = {
++		{
++			.caldata_offset		= 0xe00000,
++		},
++	},
++
++	.has_enet1				= 1,
++	.enet1 = {
++		.has_phy			= 1,
++		.phy_id				= 0,
++		.force_speed_100		= 1,
++		.force_duplex_full		= 1,
++	},
++
++	.leds = {
++		{
++			.name			= "HW556:red:message",
++			.gpio			= 0,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:hspa",
++			.gpio			= 1,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:dsl",
++			.gpio			= 2,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:power",
++			.gpio			= 3,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "HW556:red:all",
++			.gpio			= 6,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "help",
++			.gpio			= 8,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_HELP,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "wlan",
++			.gpio			= 9,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_WLAN,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "restart",
++			.gpio			= 10,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "reset",
++			.gpio			= 11,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_CONFIG,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++static struct board_info __initdata board_HW556_A = {
++	.name					= "HW556_A",
++	.expected_cpu_id			= 0x6358,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 2,
++
++	.has_caldata				= 1,
++	.caldata = {
++		{
++			.vendor			= PCI_VENDOR_ID_RALINK,
++			.caldata_offset		= 0xeffe00,
++			.slot			= 1,
++			.eeprom			= "rt2x00.eeprom",
++		},
++	},
++
++	.has_enet1				= 1,
++	.enet1 = {
++		.has_phy			= 1,
++		.phy_id				= 0,
++		.force_speed_100		= 1,
++		.force_duplex_full		= 1,
++	},
++
++	.leds = {
++		{
++			.name			= "HW556:green:lan1",
++			.gpio			= 0,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:green:lan2",
++			.gpio			= 1,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:dsl",
++			.gpio			= 2,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:power",
++			.gpio			= 3,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "HW556:red:message",
++			.gpio			= 12,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan1",
++			.gpio			= 13,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:hspa",
++			.gpio			= 15,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan2",
++			.gpio			= 22,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:green:lan3",
++			.gpio			= 23,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan3",
++			.gpio			= 26,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:green:lan4",
++			.gpio			= 27,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan4",
++			.gpio			= 28,
++			.active_low		= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "help",
++			.gpio			= 8,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_HELP,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "wlan",
++			.gpio			= 9,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_WLAN,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "restart",
++			.gpio			= 10,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "reset",
++			.gpio			= 11,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_CONFIG,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++static struct board_info __initdata board_HW556_B = {
++	.name					= "HW556_B",
++	.expected_cpu_id			= 0x6358,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 2,
++
++	.has_caldata				= 1,
++	.caldata = {
++		{
++			.vendor			= PCI_VENDOR_ID_ATHEROS,
++			.caldata_offset		= 0xf7e000,
++			.slot			= 1,
++			.endian_check		= 1,
++			.led_pin		= 2,
++		},
++	},
++
++	.has_enet1				= 1,
++	.enet1 = {
++		.has_phy			= 1,
++		.phy_id				= 0,
++		.force_speed_100		= 1,
++		.force_duplex_full		= 1,
++	},
++
++	.leds = {
++		{
++			.name			= "HW556:red:message",
++			.gpio			= 0,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:hspa",
++			.gpio			= 1,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:dsl",
++			.gpio			= 2,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:power",
++			.gpio			= 3,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "HW556:red:all",
++			.gpio			= 6,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "HW556:green:lan1",
++			.gpio			= 12,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan1",
++			.gpio			= 13,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:green:lan2",
++			.gpio			= 15,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan2",
++			.gpio			= 22,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:green:lan3",
++			.gpio			= 23,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan3",
++			.gpio			= 26,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:green:lan4",
++			.gpio			= 27,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan4",
++			.gpio			= 28,
++			.active_low		= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "help",
++			.gpio			= 8,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_HELP,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "wlan",
++			.gpio			= 9,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_WLAN,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "restart",
++			.gpio			= 10,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "reset",
++			.gpio			= 11,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_CONFIG,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++static struct board_info __initdata board_HW556_C = {
++	.name					= "HW556_C",
++	.expected_cpu_id			= 0x6358,
++
++	.has_uart0				= 1,
++	.has_pci				= 1,
++	.has_ohci0				= 1,
++	.has_ehci0				= 1,
++	.num_usbh_ports				= 2,
++
++	.has_caldata				= 1,
++	.caldata = {
++		{
++			.vendor			= PCI_VENDOR_ID_ATHEROS,
++			.caldata_offset		= 0xefe000,
++			.slot			= 1,
++			.endian_check		= 1,
++			.led_pin		= 2,
++		},
++	},
++
++	.has_enet1				= 1,
++	.enet1 = {
++		.has_phy			= 1,
++		.phy_id				= 0,
++		.force_speed_100		= 1,
++		.force_duplex_full		= 1,
++	},
++
++	.leds = {
++		{
++			.name			= "HW556:red:message",
++			.gpio			= 0,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:hspa",
++			.gpio			= 1,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:dsl",
++			.gpio			= 2,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:power",
++			.gpio			= 3,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "HW556:red:all",
++			.gpio			= 6,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "HW556:green:lan1",
++			.gpio			= 12,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan1",
++			.gpio			= 13,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:green:lan2",
++			.gpio			= 15,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan2",
++			.gpio			= 22,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:green:lan3",
++			.gpio			= 23,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan3",
++			.gpio			= 26,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:green:lan4",
++			.gpio			= 27,
++			.active_low		= 1,
++		},
++		{
++			.name			= "HW556:red:lan4",
++			.gpio			= 28,
++			.active_low		= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "help",
++			.gpio			= 8,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_HELP,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "wlan",
++			.gpio			= 9,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_WLAN,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "restart",
++			.gpio			= 10,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "reset",
++			.gpio			= 11,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_CONFIG,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+  /* T-Home Speedport W 303V Typ B */
+ static struct board_info __initdata board_spw303v = {
+ 	.name			= "96358-502V",
+@@ -3350,6 +3836,10 @@ static const struct board_info __initcon
+ 	&board_nb4_fxc_r2,
+ 	&board_ct6373_1,
+ 	&board_HW553,
++	&board_HW556,
++	&board_HW556_A,
++	&board_HW556_B,
++	&board_HW556_C,
+ 	&board_spw303v,
+ 	&board_DVAG3810BN,
+ #endif
+@@ -3415,13 +3905,37 @@ static void __init boardid_fixup(u8 *boo
+ 	struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
+ 	char *board_name = (char *)bcm63xx_nvram_get_name();
+ 
+-	if (BCMCPU_IS_6358() && (!strcmp(board_name, "96358VW"))) {
+-		u8 *p = boot_addr + NB4_PID_OFFSET;
+-
+-		/* Extract nb4 PID */
+-		if (!memcmp(p, "NB4-", 4)) {
+-			memcpy(board_name, p, sizeof("NB4-XXX-rX"));
+-			return;
++	if (BCMCPU_IS_6358()) {
++		if (!strcmp(board_name, "96358VW")) {
++			u8 *p = boot_addr + NB4_PID_OFFSET;
++
++			/* Extract nb4 PID */
++			if (!memcmp(p, "NB4-", 4)) {
++				memcpy(board_name, p, sizeof("NB4-XXX-rX"));
++				return;
++			}
++		} else if (!strcmp(board_name, "HW556")) {
++			/*
++			 * HW556 has different wlan caldatas depending on
++			 * hardware version.
++			 * Detect hardware version and change board id
++			 */
++			u8 cal_data_ath9k[4] = { 0xa5, 0x5a, 0, 0 };
++			u8 cal_data_rt3062[4] = { 0x62, 0x30, 1, 0 };
++
++			if (!memcmp(boot_addr + 0xeffe00,
++				    &cal_data_rt3062, 4)) {
++				/* Ralink 0xeffe00 */
++				memcpy(board_name, "HW556_A", 7);
++			} else if (!memcmp(boot_addr + 0xf7e000,
++					   &cal_data_ath9k, 4)) {
++				/* Atheros 0xf7e000 */
++				memcpy(board_name, "HW556_B", 7);
++			} else if (!memcmp(boot_addr + 0xefe000,
++					   &cal_data_ath9k, 4)) {
++				/* Atheros 0xefe000 */
++				memcpy(board_name, "HW556_C", 7);
++			}
+ 		}
+ 	}
+ 
+--- a/drivers/mtd/bcm63xxpart.c
++++ b/drivers/mtd/bcm63xxpart.c
+@@ -70,6 +70,11 @@ static int bcm63xx_parse_cfe_partitions(
+ 			      BCM63XX_CFE_BLOCK_SIZE);
+ 
+ 	cfelen = cfe_erasesize;
++
++	/* Fix HW556 MX29LV128DB */
++	if (!strncmp(bcm63xx_nvram_get_name(), "HW556", 5))
++		cfelen = 0x20000;
++
+ 	nvramlen = bcm63xx_nvram_get_psi_size() * SZ_1K;
+ 	nvramlen = roundup(nvramlen, cfe_erasesize);
+ 	nvramaddr = master->size - nvramlen;
diff --git a/target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch b/target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch
new file mode 100644
index 0000000..607807a
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/535-board_rta770w.patch
@@ -0,0 +1,71 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -778,6 +778,60 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++// Actually this board is the very same as the rta770bw,
++// where the additional 'b' within the name just
++// just indicates 'Annex B'. The ADSL Modem itself is able
++// to handle both Annex A as well as Annex B -
++// the loaded firmware makes the only difference
++static struct board_info __initdata board_rta770w = {
++	.name				= "RTA770W",
++	.expected_cpu_id		= 0x6345,
++
++	.has_uart0			= 1,
++
++	.has_enet0			= 1,
++
++	.enet0 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "RTA770W:green:usb",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "RTA770W:green:adsl",
++			.gpio		= 8,
++		},
++		{
++			.name		= "RTA770W:green:diag",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++		{
++			.name		= "RTA770W:green:wlan",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 13,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.active_low	= 1,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -3798,6 +3852,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6345
+ 	&board_96345gw2,
+ 	&board_rta770bw,
++	&board_rta770w,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6348
+ 	&board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch b/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch
new file mode 100644
index 0000000..c08135c
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/536-board_fast2704.patch
@@ -0,0 +1,145 @@
+From: Marcin Jurkowski <marcin1j@gmail.com>
+Date: Thu, 31 Oct 2013 22:33:10 +0000
+Subject: [PATCH] bcm63xx: Add kernel support for Sagemcom F@ST2704V2 ADSL
+ router
+
+This adds kernel support support for Sagemcom F@st 2704 wireless ADSL
+router.
+It's a BCM6328-based 802.11n wireless router with USB port and ADSL2+
+modem equipped with 64 MiB RAM and 8 MiB flash.
+
+Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1482,6 +1482,122 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_FAST2704V2 = {
++	.name				= "F@ST2704V2",
++	.expected_cpu_id		= 0x6328,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++	.has_ohci0			= 1,
++	.has_ehci0			= 1,
++	.has_usbd			= 1,
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id = 1,
++				.name	= "Port 1",
++			},
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		/* front LEDs */
++		{
++			.name			= "F@ST2704V2:green:power",
++			.gpio			= 4,
++			.active_low		= 1,
++			.default_trigger	= "default-on",
++		},
++		{
++			.name			= "F@ST2704V2:red:power",
++			.gpio			= 5,
++			.active_low		= 1,
++		},
++		{
++			.name			= "F@ST2704V2:red:inet",
++			.gpio			= 2,
++			.active_low		= 1,
++		},
++		{
++			.name			= "F@ST2704V2:green:dsl",
++			.gpio			= 3,
++			.active_low		= 1,
++		},
++		{
++			.name			= "F@ST2704V2:green:inet",
++			.gpio			= 11,
++			.active_low		= 1,
++		},
++		{
++			.name			= "F@ST2704V2:green:usb",
++			.gpio			= 1,
++			.active_low		= 1,
++		},
++
++		/* side button LEDs */
++		{
++			.name			= "F@ST2704V2:green:wps",
++			.gpio			= 10,
++			.active_low		= 1,
++		},
++
++		/* FIXME: can't control gpio0 line in "out" state, needs further investigation */
++		/*
++		{
++			.name			= "F@ST2704V2:green:rfkill",
++			.gpio			= 0,
++			.active_low		= 1,
++		},
++		*/
++
++	},
++	.buttons = {
++		{
++			.desc			= "reset",
++			.gpio			= 23,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "wps",
++			.gpio			= 24,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_WPS_BUTTON,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "rfkill",
++			.gpio			= 15,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_WLAN,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_rta1025w_16 = {
+ 	.name				= "RTA1025W_16",
+ 	.expected_cpu_id		= 0x6348,
+@@ -3842,6 +3958,7 @@ static const struct board_info __initcon
+ 	&board_963281TAN,
+ 	&board_963281T_TEF,
+ 	&board_dsl_274xb_f1,
++	&board_FAST2704V2,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6338
+ 	&board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch b/target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch
new file mode 100644
index 0000000..6f64200
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/537-board_fast2504n.patch
@@ -0,0 +1,113 @@
+From: Max Staudt <openwrt.max@enpas.org>
+Date: Wed, 15 Jan 2014 18:51:13 +0000
+Subject: [PATCH] brcm63xx: F@ST2504n board support (Linux-3.10.26)
+
+Signed-off-by: Max Staudt <openwrt.max@enpas.org>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -3797,6 +3797,96 @@ static struct board_info __initdata boar
+ 	.devs = nb6_devices,
+ 	.num_devs = ARRAY_SIZE(nb6_devices),
+ };
++
++static struct board_info __initdata board_fast2504n = {
++	.name				= "F@ST2504n",
++	.expected_cpu_id		= 0x6362,
++
++	.has_uart0			= 1,
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "Port 1",
++			},
++
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "fast2504n:orange:power",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "fast2504n:green:power",
++			.gpio		= 10,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "fast2504n:red:internet",
++			.gpio		= 26,
++			.active_low	= 1,
++		},
++		{
++			.name		= "fast2504n:green:ok",
++			.gpio		= 28,
++			.active_low	= 1,
++		},
++		{
++			.name		= "fast2504n:orange:ok",
++			.gpio		= 29,
++			.active_low	= 1,
++		},
++		{
++			.name		= "fast2504n:orange:wlan",
++			.gpio		= 30,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 24,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++			.active_low	= 1,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 25,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++			.active_low	= 1,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -4018,6 +4108,7 @@ static const struct board_info __initcon
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6362
+ 	&board_nb6,
++	&board_fast2504n,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.14/550-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-3.14/550-alice_gate2_leds.patch
new file mode 100644
index 0000000..9aa1759
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/550-alice_gate2_leds.patch
@@ -0,0 +1,102 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2213,6 +2213,99 @@ static struct board_info __initdata boar
+ 
+ 	.has_ohci0 = 1,
+ 	.has_ehci0 = 1,
++
++	.leds = {
++		{
++			.name		= "AGPF-S0:red:power",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:green:power",
++			.gpio		= 4,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "AGPF-S0:red:service",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:green:service",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:green:adsl",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:red:adsl",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:red:wifi",
++			.gpio		= 23,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:green:wifi",
++			.gpio		= 22,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:green:internet",
++			.gpio		= 25,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:red:internet",
++			.gpio		= 24,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:red:usr1",
++			.gpio		= 27,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:green:usr1",
++			.gpio		= 26,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:red:usr2",
++			.gpio		= 30,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AGPF-S0:green:usr2",
++			.gpio		= 29,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc           = "reset",
++			.gpio           = 37,
++			.active_low     = 1,
++			.type           = EV_KEY,
++			.code           = KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 34,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
+ };
+ 
+ static struct board_info __initdata board_DWVS0 = {
diff --git a/target/linux/brcm63xx/patches-3.14/551-96348gw_a_leds.patch b/target/linux/brcm63xx/patches-3.14/551-96348gw_a_leds.patch
new file mode 100644
index 0000000..aff9c4f
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/551-96348gw_a_leds.patch
@@ -0,0 +1,22 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1657,6 +1657,19 @@ static struct board_info __initdata boar
+ 	},
+ 
+ 	.has_ohci0 = 1,
++
++	.leds = {
++		{
++			.name		= "96348GW-A::adsl",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96348GW-A::usb",
++			.gpio		= 0,
++			.active_low	= 1,
++		}
++	},
+ };
+ 
+ static struct board_info __initdata board_96348_D4PW = {
diff --git a/target/linux/brcm63xx/patches-3.14/552-board_96348gw-10_reset_button.patch b/target/linux/brcm63xx/patches-3.14/552-board_96348gw-10_reset_button.patch
new file mode 100644
index 0000000..de0a222
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/552-board_96348gw-10_reset_button.patch
@@ -0,0 +1,20 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -1001,6 +1001,17 @@ static struct board_info __initdata boar
+ 			.active_low	= 1,
+ 		},
+ 	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 6,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
+ };
+ 
+ static struct board_info __initdata board_96348gw_11 = {
diff --git a/target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch b/target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch
new file mode 100644
index 0000000..ee3cdec
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/553-boards_probe_switch.patch
@@ -0,0 +1,105 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -629,6 +629,8 @@ static struct board_info __initdata boar
+ 	.has_uart0			= 1,
+ 	.has_enet0			= 1,
+ 	.enet0 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
+@@ -672,6 +674,8 @@ static struct board_info __initdata boar
+ 	.has_uart0			= 1,
+ 	.has_enet0			= 1,
+ 	.enet0 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
+@@ -957,6 +961,8 @@ static struct board_info __initdata boar
+ 		.use_internal_phy	= 1,
+ 	},
+ 	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
+@@ -1029,6 +1035,8 @@ static struct board_info __initdata boar
+ 	},
+ 
+ 	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
+@@ -1258,6 +1266,8 @@ static struct board_info __initdata boar
+ 		.use_internal_phy	= 1,
+ 	},
+ 	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
+@@ -1433,6 +1443,8 @@ static struct board_info __initdata boar
+ 	},
+ 
+ 	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
+@@ -1623,6 +1635,12 @@ static struct board_info __initdata boar
+ 		.use_internal_phy	= 1,
+ 	},
+ 	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
+@@ -2038,6 +2056,8 @@ static struct board_info __initdata boar
+ 	},
+ 
+ 	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
+@@ -2090,6 +2110,8 @@ static struct board_info __initdata boar
+ 	},
+ 
+ 	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
+@@ -2231,6 +2253,8 @@ static struct board_info __initdata boar
+ 	},
+ 
+ 	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
+@@ -2348,6 +2372,8 @@ static struct board_info __initdata boar
+ 	},
+ 
+ 	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
+ 		.force_speed_100	= 1,
+ 		.force_duplex_full	= 1,
+ 	},
diff --git a/target/linux/brcm63xx/patches-3.14/554-board_DWVS0_leds_buttons.patch b/target/linux/brcm63xx/patches-3.14/554-board_DWVS0_leds_buttons.patch
new file mode 100644
index 0000000..d9c15e2
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/554-board_DWVS0_leds_buttons.patch
@@ -0,0 +1,97 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2380,6 +2380,94 @@ static struct board_info __initdata boar
+ 
+ 	.has_ohci0			= 1,
+ 	.has_ehci0			= 1,
++
++	.leds = {
++		{
++			.name		= "DWV-S0:red:power",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:green:power",
++			.gpio		= 4,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "DWV-S0:red:internet",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:green:internet",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:green:ADSL",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:red:ADSL",
++			.gpio		= 12,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:red:wifi",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:green:VoIP",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:red:VoIP",
++			.gpio		= 0,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:red:ethernet",
++			.gpio		= 1,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:green:ethernet",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:red:USB",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++		{
++			.name		= "DWV-S0:green:USB",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 37,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 34,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
+ };
+ 
+ /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch b/target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch
new file mode 100644
index 0000000..5192bb5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/555-board_96318ref.patch
@@ -0,0 +1,106 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -104,6 +104,93 @@ static struct board_info __initdata boar
+ #endif
+ 
+ /*
++ * known 6318 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_6318
++static struct board_info __initdata board_96318ref = {
++	.name				= "96318REF",
++	.expected_cpu_id		= 0x6318,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++
++	.has_usbd			= 1,
++
++	.usbd = {
++		.use_fullspeed		= 0,
++		.port_no		= 0,
++	},
++
++	.has_enetsw			= 1,
++
++	.has_ehci0			= 1,
++	.num_usbh_ports			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id = 1,
++				.name	= "Port 1",
++			},
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "96318REF:red:post-failed",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96318REF:green:inet",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96318REF:red:inet-fail",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "wps",
++			.gpio			= 33,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_WPS_BUTTON,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "reset",
++			.gpio			= 34,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++#endif
++
++/*
+  * known 6328 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_6328
+@@ -4272,6 +4359,9 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_3368
+ 	&board_cvg834g,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6318
++	&board_96318ref,
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
+ 	&board_96328A_1241N,
diff --git a/target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch b/target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch
new file mode 100644
index 0000000..43a23b5
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/556-board_96318ref_p300.patch
@@ -0,0 +1,105 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -188,6 +188,94 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_96318ref_p300 = {
++	.name				= "96318REF_P300",
++	.expected_cpu_id		= 0x6318,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++
++	.has_usbd			= 1,
++
++	.usbd = {
++		.use_fullspeed		= 0,
++		.port_no		= 0,
++	},
++
++	.has_enetsw			= 1,
++
++	.has_ehci0			= 1,
++	.num_usbh_ports			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id = 1,
++				.name	= "Port 1",
++			},
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "96318REF_P300:red:post-failed",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96318REF_P300:green:inet",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96318REF_P300:red:inet-fail",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "96318REF_P300::usb-pwron",
++			.gpio		= 13,
++			.active_low	= 1,
++			.default_trigger = "default-on",
++		},
++	},
++
++	.buttons = {
++		{
++			.desc			= "wps",
++			.gpio			= 33,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_WPS_BUTTON,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc			= "reset",
++			.gpio			= 34,
++			.active_low		= 1,
++			.type			= EV_KEY,
++			.code			= KEY_RESTART,
++			.debounce_interval	= BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -4361,6 +4449,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6318
+ 	&board_96318ref,
++	&board_96318ref_p300,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_6328
+ 	&board_96328avng,
diff --git a/target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch b/target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch
new file mode 100644
index 0000000..96d7716
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch
@@ -0,0 +1,88 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4441,6 +4441,75 @@ static struct board_info __initdata boar
+ #endif
+ 
+ /*
++ * known 63268/63269 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963269bhr = {
++	.name				= "963269BHR",
++	.expected_cpu_id		= 0x63268,
++
++	.has_uart0			= 1,
++
++	.has_pci			= 1,
++
++	.has_ehci0			= 1,
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "port1",
++			},
++
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "port2",
++			},
++
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "port3",
++			},
++
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "port4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "963629BHR:green:usb1",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963629BHR:green:usb2",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 32,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++#endif
++
++/*
+  * all boards
+  */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -4525,6 +4594,9 @@ static const struct board_info __initcon
+ 	&board_96368mvwg,
+ 	&board_96368mvngr,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_63268
++	&board_963269bhr,
++#endif
+ };
+ 
+ /*
diff --git a/target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch b/target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch
new file mode 100644
index 0000000..ec25b9e
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/558-board_AR1004G.patch
@@ -0,0 +1,70 @@
+From: "mexit@o2.pl" <mexit@o2.pl>
+Date: Sun, 24 Nov 2013 21:33:38 +0000
+Subject: [PATCH 4/5] brcm63xx: add support for Asmax AR 1004g router
+
+Support for Asmax AR 1004g router
+
+Signed-off-by: Adrian Feliks <mexit@o2.pl>
+---
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2210,6 +2210,51 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_96348gw_10_AR1004G = {
++	.name				= "AR1004G",
++	.expected_cpu_id		= 0x6348,
++
++	.has_uart0			= 1,
++	.has_enet1			= 1,
++	.has_pci			= 1,
++	
++	.enet1 = {
++		.has_phy		= 1,
++		.phy_id			= 0,
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "AR1004G:green:inet",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AR1004G:green:power",
++			.gpio		= 0,
++			.active_low	= 1,
++		},
++		{
++			.name		= "AR1004G:red:power",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 33,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ #endif
+ 
+ /*
+@@ -4561,6 +4606,7 @@ static const struct board_info __initcon
+ 	&board_96348A_122,
+ 	&board_CPVA502plus,
+ 	&board_96348W3,
++	&board_96348gw_10_AR1004G,
+ #endif
+ 
+ #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch b/target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch
new file mode 100644
index 0000000..4f9ef79
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch
@@ -0,0 +1,119 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4552,6 +4552,108 @@ static struct board_info __initdata boar
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_vw6339gu = {
++	.name				= "VW6339GU",
++	.expected_cpu_id		= 0x63268,
++
++	.has_uart0			= 1,
++
++	.has_ehci0			= 1,
++	.has_ohci0			= 1,
++	.num_usbh_ports			= 1,
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "LAN2",
++			},
++
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "LAN3",
++			},
++
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "LAN4",
++			},
++
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "LAN1",
++			},
++
++			[4] = {
++				.used	= 1,
++				.phy_id	= 7,
++				.name	= "WAN",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "VW6339GU:green:power",
++			.gpio		= 1,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VW6339GU:red:power",
++			.gpio		= 0,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VW6339GU:green:internet",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VW6339GU:red:internet",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VW6339GU:green:dsl",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VW6339GU:green:wps",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "VW6339GU:green:usb",
++			.gpio		= 15,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 32,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 34,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
+ #endif
+ 
+ /*
+@@ -4642,6 +4744,7 @@ static const struct board_info __initcon
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ 	&board_963269bhr,
++	&board_vw6339gu,
+ #endif
+ };
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch b/target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch
new file mode 100644
index 0000000..6a70077
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/560-board_963268gu_p300.patch
@@ -0,0 +1,142 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4489,6 +4489,131 @@ static struct board_info __initdata boar
+  * known 63268/63269 boards
+  */
+ #ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963268bu_p300 = {
++	.name				= "963268BU_P300",
++	.expected_cpu_id		= 0x63268,
++
++	.has_uart0			= 1,
++
++	.has_ehci0			= 1,
++	.has_ohci0			= 1,
++	.num_usbh_ports			= 1,
++
++	.has_usbd			= 1,
++
++	.usbd = {
++		.use_fullspeed		= 0,
++		.port_no		= 0,
++	},
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 17,
++				.name	= "FE1",
++			},
++
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "GbE2",
++			},
++
++			[4] = {
++				.used	= 1,
++				.phy_id	= 0,
++				.name	= "GbE3",
++			},
++
++			[5] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "GbE1",
++			},
++
++			[6] = {
++				.used	= 1,
++				.phy_id	= 24,
++				.name	= "GbE4",
++			},
++
++			[7] = {
++				.used	= 1,
++				.phy_id	= 25,
++				.name	= "GbE5",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "963268BU_P300:green:power",
++			.gpio		= 20,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:red:power",
++			.gpio		= 21,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:internet",
++			.gpio		= 8,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:red:internet",
++			.gpio		= 2,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:adsl",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:wps",
++			.gpio		= 7,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:voip1",
++			.gpio		= 4,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:voip2",
++			.gpio		= 5,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963268BU_P300:green:pots",
++			.gpio		= 6,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 32,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 33,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_963269bhr = {
+ 	.name				= "963269BHR",
+ 	.expected_cpu_id		= 0x63268,
+@@ -4743,6 +4868,7 @@ static const struct board_info __initcon
+ 	&board_96368mvngr,
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
++	&board_963268bu_p300,
+ 	&board_963269bhr,
+ 	&board_vw6339gu,
+ #endif
diff --git a/target/linux/brcm63xx/patches-3.14/800-wl_exports.patch b/target/linux/brcm63xx/patches-3.14/800-wl_exports.patch
new file mode 100644
index 0000000..3e78c17
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/800-wl_exports.patch
@@ -0,0 +1,34 @@
+--- a/arch/mips/bcm63xx/nvram.c
++++ b/arch/mips/bcm63xx/nvram.c
+@@ -40,6 +40,13 @@ struct bcm963xx_nvram {
+ static struct bcm963xx_nvram nvram;
+ static int mac_addr_used;
+ 
++/*
++ * Required export for WL
++ */
++#define NVRAM_SPACE 0x8000
++char nvram_buf[NVRAM_SPACE];
++EXPORT_SYMBOL(nvram_buf);
++
+ void __init bcm63xx_nvram_init(void *addr)
+ {
+ 	unsigned int check_len;
+@@ -48,6 +55,7 @@ void __init bcm63xx_nvram_init(void *add
+ 
+ 	/* extract nvram data */
+ 	memcpy(&nvram, addr, sizeof(nvram));
++	memcpy(&nvram_buf, addr, NVRAM_SPACE);
+ 
+ 	/* check checksum before using data */
+ 	if (nvram.version <= 4) {
+--- a/arch/mips/mm/cache.c
++++ b/arch/mips/mm/cache.c
+@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ 
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_inv);
+ 
+ #endif /* CONFIG_DMA_NONCOHERENT */
+ 
diff --git a/target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch
new file mode 100644
index 0000000..3c0faba
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/801-ssb_export_fallback_sprom.patch
@@ -0,0 +1,27 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -14,6 +14,7 @@
+ #include <linux/ssb/ssb.h>
+ #include <linux/gpio_keys.h>
+ #include <linux/input.h>
++#include <linux/export.h>
+ #include <linux/spi/spi.h>
+ #include <linux/spi/spi_gpio.h>
+ #if 0 /* FIXME: 3.14 removed non-DT support */
+@@ -4879,7 +4880,7 @@ static const struct board_info __initcon
+  * bcm4318 WLAN work
+  */
+ #ifdef CONFIG_SSB_PCIHOST
+-static struct ssb_sprom bcm63xx_sprom = {
++struct ssb_sprom bcm63xx_sprom = {
+ 	.revision		= 0x02,
+ 	.board_rev		= 0x17,
+ 	.country_code		= 0x0,
+@@ -4899,6 +4900,7 @@ static struct ssb_sprom bcm63xx_sprom =
+ 	.boardflags_lo		= 0x2848,
+ 	.boardflags_hi		= 0x0000,
+ };
++EXPORT_SYMBOL(bcm63xx_sprom);
+ 
+ int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
+ {
diff --git a/target/linux/brcm63xx/patches-3.14/802-rtl8367r_fix_RGMII_support.patch b/target/linux/brcm63xx/patches-3.14/802-rtl8367r_fix_RGMII_support.patch
new file mode 100644
index 0000000..9037d89
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.14/802-rtl8367r_fix_RGMII_support.patch
@@ -0,0 +1,30 @@
+From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
+From: Miguel GAIO <miguel.gaio@efixo.com>
+Date: Fri, 6 Jul 2012 14:12:33 +0200
+Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
+
+---
+ drivers/net/phy/rtl8367.c  |    5 +++++
+ 1 files changed, 5 insertions(+), 0 deletions(-)
+
+--- a/drivers/net/phy/rtl8367.c
++++ b/drivers/net/phy/rtl8367.c
+@@ -146,6 +146,10 @@
+ #define   RTL8367_EXT_RGMXF_TXDELAY_MASK	1
+ #define   RTL8367_EXT_RGMXF_RXDELAY_MASK	0x7
+ 
++#define RTL8367_PHY_AD_REG			0x130f
++#define    RTL8370_PHY_AD_DUMMY_1_OFFSET	5
++#define    RTL8370_PHY_AD_DUMMY_1_MASK		0xe0
++
+ #define RTL8367_DI_FORCE_REG(_x)		(0x1310 + (_x))
+ #define   RTL8367_DI_FORCE_MODE			BIT(12)
+ #define   RTL8367_DI_FORCE_NWAY			BIT(7)
+@@ -894,6 +898,7 @@ static int rtl8367_extif_set_mode(struct
+ 	case RTL8367_EXTIF_MODE_RGMII_33V:
+ 		REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
+ 		REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
++		REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
+ 		break;
+ 
+ 	case RTL8367_EXTIF_MODE_TMII_MAC:
author	Jonas Gorski <jogo@openwrt.org>	2014-04-04 10:17:08 +0000
committer	Jonas Gorski <jogo@openwrt.org>	2014-04-04 10:17:08 +0000
commit	b519908e848505ed671c13c45fbd5d29d9472264 (patch)
tree	e498e145bfae89a82aa96cdd3077c4bcb4817cbe /target/linux/brcm63xx/patches-3.14
parent	e098045dc2b233f2a44b9557a12f4645c82c938d (diff)
download	mtk-20170518-b519908e848505ed671c13c45fbd5d29d9472264.zip mtk-20170518-b519908e848505ed671c13c45fbd5d29d9472264.tar.gz mtk-20170518-b519908e848505ed671c13c45fbd5d29d9472264.tar.bz2