bcm63xx: remove 3.3 support

3.6 is tested enough to be considered stable.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35009

1 files changed, 0 insertions, 92 deletions

diff --git a/target/linux/brcm63xx/patches-3.3/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch b/target/linux/brcm63xx/patches-3.3/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
deleted file mode 100644
index 847b695..0000000
--- a/target/linux/brcm63xx/patches-3.3/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 5fb4e8d7287ac8fcb33aae8b1e9e22c5a3c392bd Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 17:33:40 +0100
-Subject: [PATCH 51/79] MTD: DEVICES: m25p80: add support for limiting reads
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c |   29 +++++++++++++++++++++++++++--
- include/linux/spi/flash.h    |    4 ++++
- 2 files changed, 31 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -100,6 +100,7 @@ struct m25p {
- 	u16			addr_width;
- 	u8			erase_opcode;
- 	u8			*command;
-+	int			max_transfer_len;
- };
- 
- static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-@@ -346,10 +347,9 @@ static int m25p80_erase(struct mtd_info
-  * Read an address range from the flash chip.  The address range
-  * may be any size provided it is within the physical boundaries.
-  */
--static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-+static int __m25p80_read(struct m25p *flash, loff_t from, size_t len,
- 	size_t *retlen, u_char *buf)
- {
--	struct m25p *flash = mtd_to_m25p(mtd);
- 	struct spi_transfer t[2];
- 	struct spi_message m;
- 
-@@ -408,6 +408,28 @@ static int m25p80_read(struct mtd_info *
- 	return 0;
- }
- 
-+static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-+	size_t *retlen, u_char *buf)
-+{
-+	struct m25p *flash = mtd_to_m25p(mtd);
-+	size_t off;
-+	size_t read_len = flash->max_transfer_len;
-+	size_t part_len;
-+	int ret = 0;
-+
-+	if (!read_len)
-+		return __m25p80_read(flash, from, len, retlen, buf);
-+
-+	*retlen = 0;
-+
-+	for (off = 0; off < len && !ret; off += read_len) {
-+		ret = __m25p80_read(flash, from + off, min(len - off, read_len),
-+				    &part_len, buf + off);
-+			*retlen += part_len;
-+	}
-+
-+	return ret;
-+}
- /*
-  * Write an address range to the flash chip.  Data must be written in
-  * FLASH_PAGESIZE chunks.  The address range may be any size provided
-@@ -897,6 +919,9 @@ static int __devinit m25p_probe(struct s
- 		return -ENOMEM;
- 	}
- 
-+	if (data)
-+		flash->max_transfer_len = data->max_transfer_len;
-+
- 	flash->spi = spi;
- 	mutex_init(&flash->lock);
- 	dev_set_drvdata(&spi->dev, flash);
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -13,6 +13,8 @@ struct mtd_part_parser_data;
-  * @part_probe_types: optional list of MTD parser names to use for
-  *	partitioning
-  *
-+ * @max_transfer_len: option maximum read/write length limitation for
-+ *	SPI controllers not able to transfer any length commands.
-  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
-  * provide information about SPI flash parts (such as DataFlash) to
-  * help set up the device and its appropriate default partitioning.
-@@ -28,6 +30,8 @@ struct flash_platform_data {
- 	char		*type;
- 
- 	const char	**part_probe_types;
-+
-+	unsigned int	max_transfer_len;
- 	/* we'll likely add more ... use JEDEC IDs, etc */
- };
-