diff options
| author | Jonas Gorski <jogo@openwrt.org> | 2015-08-25 22:04:53 +0000 |
|---|---|---|
| committer | Jonas Gorski <jogo@openwrt.org> | 2015-08-25 22:04:53 +0000 |
| commit | 77a70a071619c12b71990180f3440dfdcd5962bd (patch) | |
| tree | ee8f61919c1c952ef08ab11d5ca58e7767e5abf1 /target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch | |
| parent | 7a68c31a819ee640e529b629f1457ab0b87add6b (diff) | |
| download | mtk-20170518-77a70a071619c12b71990180f3440dfdcd5962bd.zip mtk-20170518-77a70a071619c12b71990180f3440dfdcd5962bd.tar.gz mtk-20170518-77a70a071619c12b71990180f3440dfdcd5962bd.tar.bz2 | |
brcm63xx: enable dual rx/tx spi support for hsspi
should improve flash access times. Should be harmless to gnerally
enable regardless if a flash supporting dual reads is attached. In
doubt, spi-nor will just fall back to serial reads.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46725
Diffstat (limited to 'target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch')
| -rw-r--r-- | target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch b/target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch new file mode 100644 index 0000000..1be40eb --- /dev/null +++ b/target/linux/brcm63xx/patches-4.1/010-4.3-01-spi-bcm63xx-hsspi-add-support-for-dual-spi-read-writ.patch @@ -0,0 +1,68 @@ +From 61dc388f577b6f984797949f32c30021d9ea73dc Mon Sep 17 00:00:00 2001 +From: Jonas Gorski <jogo@openwrt.org> +Date: Sun, 23 Aug 2015 12:16:02 +0200 +Subject: [PATCH V2] spi/bcm63xx-hsspi: add support for dual spi read/write + +Add support for dual read/writes on spi-bcm63xx-hsspi. This has been +tested with a s25fl129p1 dual read capable spi flash, with a nice speed +improvement: + +serial read: + +root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192 +2032+0 records in +2032+0 records out +real 0m 4.39s +user 0m 0.00s +sys 0m 1.55s + +dual read: + +root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192 +2032+0 records in +2032+0 records out +real 0m 3.09s +user 0m 0.00s +sys 0m 1.56s + +Signed-off-by: Jonas Gorski <jogo@openwrt.org> +--- + drivers/spi/spi-bcm63xx-hsspi.c | 13 +++++++++---- + 1 file changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/spi/spi-bcm63xx-hsspi.c ++++ b/drivers/spi/spi-bcm63xx-hsspi.c +@@ -76,6 +76,7 @@ + #define HSSPI_FIFO_REG(x) (0x200 + (x) * 0x200) + + ++#define HSSPI_OP_MULTIBIT BIT(11) + #define HSSPI_OP_CODE_SHIFT 13 + #define HSSPI_OP_SLEEP (0 << HSSPI_OP_CODE_SHIFT) + #define HSSPI_OP_READ_WRITE (1 << HSSPI_OP_CODE_SHIFT) +@@ -171,9 +172,12 @@ static int bcm63xx_hsspi_do_txrx(struct + if (opcode != HSSPI_OP_READ) + step_size -= HSSPI_OPCODE_LEN; + +- __raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT | +- 2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT | +- 2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff, ++ if ((opcode == HSSPI_OP_READ && t->rx_nbits == SPI_NBITS_DUAL) || ++ (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL)) ++ opcode |= HSSPI_OP_MULTIBIT; ++ ++ __raw_writel(1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT | ++ 1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT | 0xff, + bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select)); + + while (pending > 0) { +@@ -374,7 +378,8 @@ static int bcm63xx_hsspi_probe(struct pl + master->num_chipselect = 8; + master->setup = bcm63xx_hsspi_setup; + master->transfer_one_message = bcm63xx_hsspi_transfer_one; +- master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; ++ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | ++ SPI_RX_DUAL | SPI_TX_DUAL; + master->bits_per_word_mask = SPI_BPW_MASK(8); + master->auto_runtime_pm = true; + |