Add CT6376-1 board support

Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32892

5 files changed, 142 insertions, 2 deletions

diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh b/target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh
index fc743c7..f5b6d44 100755
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/brcm63xx_fixcrc.sh
@@ -18,6 +18,7 @@ case "$board_name" in
 	"CPVA502+" |\
 	AW4339U |\
 	CPVA642 |\
+	CT6373-1 |\
 	MAGIC |\
 	V2110 |\
 	V2500V_BB)
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/network b/target/linux/brcm63xx/base-files/etc/uci-defaults/network
index 2eca4f2..10b6e5a 100755
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/network
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/network
@@ -18,6 +18,7 @@ case "$board_name" in
 963281TAN |\
 96348A-122 |\
 96358-502V |\
+CT6373-1 |\
 AW4339U |\
 CPVA642 |\
 CT536_CT5621 |\
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index 8066430..5505cfd 100644
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -191,6 +191,8 @@ define Image/Build
 	$(call Image/Build/CFEFIXUP,$(1),96348GW,GW6200,6348,GW6200,$(shell printf '\x99'))
 	# Neufbox4
 	$(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
+	# Comtrend 6373
+	$(call Image/Build/CFE,$(1),CT6373-1,6358,CT6373)
 	# Comtrend 536, 5621
 	$(call Image/Build/CFEFIXUP,$(1),96348GW-11,CT536_CT5621,6348,CT536_CT5621)
 	# Davolink DV201AMR
diff --git a/target/linux/brcm63xx/patches-3.3/554-board_CT6373-1.patch b/target/linux/brcm63xx/patches-3.3/554-board_CT6373-1.patch
new file mode 100644
index 0000000..9b36baf
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.3/554-board_CT6373-1.patch
@@ -0,0 +1,136 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -51,6 +51,13 @@
+ #define NB4_SPI_GPIO_CLK	6
+ #define NB4_74HC64_GPIO(X)	(NB4_74X164_GPIO_BASE + (X))
+ 
++#define CT6373_PID_OFFSET		0xff80
++#define CT6373_74X164_GPIO_BASE	64
++#define CT6373_SPI_GPIO_MOSI	7
++#define CT6373_SPI_GPIO_CLK		6
++#define CT6373_74HC64_GPIO(X)	(CT6373_74X164_GPIO_BASE + (X))
++
++
+ static struct board_info board;
+ 
+ /*
+@@ -2287,6 +2294,111 @@ static struct board_info __initdata boar
+ 	.num_spis = ARRAY_SIZE(nb4_spi_devices),
+ };
+ 
++
++struct spi_gpio_platform_data ct6373_spi_gpio_data = {
++	.sck		= CT6373_SPI_GPIO_CLK,
++	.mosi		= CT6373_SPI_GPIO_MOSI,
++	.miso		= SPI_GPIO_NO_MISO,
++	.num_chipselect	= 1,
++};
++
++static struct platform_device ct6373_spi_gpio = {
++	.name = "spi_gpio",
++	.id   = 1,
++	.dev = {
++		.platform_data = &ct6373_spi_gpio_data,
++	},
++};
++
++static struct platform_device * __initdata ct6373_devices[] = {
++	&ct6373_spi_gpio,
++};
++
++const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
++	.base = CT6373_74X164_GPIO_BASE
++};
++
++static struct spi_board_info ct6373_spi_devices[] = {
++	{
++		.modalias = "74x164",
++		.max_speed_hz = 781000,
++		.bus_num = 1,
++		.controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
++		.mode = SPI_MODE_0,
++		.platform_data = &ct6373_74x164_platform_data
++	}
++};
++
++static struct board_info __initdata board_ct6373_1 = {
++	.name				= "CT6373-1",
++	.expected_cpu_id	= 0x6358,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++	.has_ohci0			= 1,
++	.has_ehci0			= 1,
++
++	.has_enet1			= 1,
++	.enet1 = {
++		.force_speed_100	= 1,
++		.force_duplex_full	= 1,
++	},
++
++	.leds = {
++		{
++			.name		= "CT6373-1:green:power",
++			.gpio		= 0,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "CT6373-1:green:usb",
++			.gpio		= 3,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT6373-1:green:wlan",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT6373-1:green:adsl",
++			.gpio		= CT6373_74HC64_GPIO(0),
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT6373-1:green:line",
++			.gpio		= CT6373_74HC64_GPIO(1),
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT6373-1:green:fxs1",
++			.gpio		= CT6373_74HC64_GPIO(2),
++			.active_low	= 1,
++		},
++		{
++			.name		= "CT6373-1:green:fxs2",
++			.gpio		= CT6373_74HC64_GPIO(3),
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 35,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++
++	.devs = ct6373_devices,
++	.num_devs = ARRAY_SIZE(ct6373_devices),
++	.spis = ct6373_spi_devices,
++	.num_spis = ARRAY_SIZE(ct6373_spi_devices),
++};
++
+ static struct board_info __initdata board_HW553 = {
+ 	.name                           = "HW553",
+ 	.expected_cpu_id                = 0x6358,
+@@ -2620,6 +2732,7 @@ static const struct board_info __initdat
+ 	&board_nb4_ser_r2,
+ 	&board_nb4_fxc_r1,
+ 	&board_nb4_fxc_r2,
++	&board_ct6373_1,
+ 	&board_HW553,
+ 	&board_spw303v,
+ #endif
diff --git a/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
index df3dc91..c06fce4 100644
--- a/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
@@ -8,7 +8,7 @@
  #include <linux/spi/spi.h>
  #include <linux/spi/spi_gpio.h>
  #include <linux/spi/74x164.h>
-@@ -2652,7 +2653,7 @@ static void __init nb4_nvram_fixup(void)
+@@ -2765,7 +2766,7 @@ static void __init nb4_nvram_fixup(void)
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
  	.revision		= 0x02,
  	.board_rev		= 0x17,
  	.country_code		= 0x0,
-@@ -2672,6 +2673,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -2785,6 +2786,7 @@ static struct ssb_sprom bcm63xx_sprom =
  	.boardflags_lo		= 0x2848,
  	.boardflags_hi		= 0x0000,
  };