diff options
| author | Koen Vandeputte <koen.vandeputte@ncentric.com> | 2017-01-27 15:18:00 +0100 |
|---|---|---|
| committer | Stijn Tintel <stijn@linux-ipv6.be> | 2017-02-06 20:13:06 +0100 |
| commit | c656cbc56bba7ab0b2cfd8d850707bc60b7f6efe (patch) | |
| tree | f4e108f4afcd690f86da76ebf448e52c1fd1cd33 /target/linux/cns3xxx/patches-4.4 | |
| parent | ee3067c588139ef60a72f5fecac979580d3651e3 (diff) | |
| download | mtk-20170518-c656cbc56bba7ab0b2cfd8d850707bc60b7f6efe.zip mtk-20170518-c656cbc56bba7ab0b2cfd8d850707bc60b7f6efe.tar.gz mtk-20170518-c656cbc56bba7ab0b2cfd8d850707bc60b7f6efe.tar.bz2 | |
kernel: bump to 4.4.45
Refreshed patches for all supported targets.
Compiled & tested on cns3xxx & imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
(cherry picked from commit 4d1515070baeca64fedaca957b6b4156976f3b3a)
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Conflicts:
target/linux/ar71xx/patches-4.4/920-usb-chipidea-AR933x-platform-support.patch
Diffstat (limited to 'target/linux/cns3xxx/patches-4.4')
| -rw-r--r-- | target/linux/cns3xxx/patches-4.4/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch | 2 | ||||
| -rw-r--r-- | target/linux/cns3xxx/patches-4.4/200-broadcom_phy_reinit.patch | 4 |
2 files changed, 3 insertions, 3 deletions
diff --git a/target/linux/cns3xxx/patches-4.4/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch b/target/linux/cns3xxx/patches-4.4/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch index c58830a..db2c29f 100644 --- a/target/linux/cns3xxx/patches-4.4/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch +++ b/target/linux/cns3xxx/patches-4.4/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch @@ -1,6 +1,6 @@ --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c -@@ -1964,7 +1964,8 @@ static void pcie_write_mrrs(struct pci_d +@@ -1966,7 +1966,8 @@ static void pcie_write_mrrs(struct pci_d /* In the "safe" case, do not configure the MRRS. There appear to be * issues with setting MRRS to 0 on a number of devices. */ diff --git a/target/linux/cns3xxx/patches-4.4/200-broadcom_phy_reinit.patch b/target/linux/cns3xxx/patches-4.4/200-broadcom_phy_reinit.patch index 1c72150..0d8ff59 100644 --- a/target/linux/cns3xxx/patches-4.4/200-broadcom_phy_reinit.patch +++ b/target/linux/cns3xxx/patches-4.4/200-broadcom_phy_reinit.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c -@@ -332,6 +332,11 @@ static int bcm5481_config_aneg(struct ph +@@ -362,6 +362,11 @@ static int bcm5481_config_aneg(struct ph /* Write bits 14:0. */ reg |= (1 << 15); phy_write(phydev, 0x18, reg); @@ -11,4 +11,4 @@ + phy_write(phydev, 0x1c, 0xa41f); } - return ret; + if (of_property_read_bool(np, "enet-phy-lane-swap")) { |