etrax: R.I.P.

It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34768

9 files changed, 0 insertions, 454 deletions

diff --git a/target/linux/etrax/patches-2.6.32/100-cris-makefiles.patch b/target/linux/etrax/patches-2.6.32/100-cris-makefiles.patch
deleted file mode 100644
index fbcb7fa..0000000
--- a/target/linux/etrax/patches-2.6.32/100-cris-makefiles.patch
+++ /dev/null
@@ -1,53 +0,0 @@
---- a/arch/cris/boot/compressed/Makefile
-+++ b/arch/cris/boot/compressed/Makefile
-@@ -18,7 +18,7 @@ ldflags-y += -T $(srctree)/$(src)/decomp
- OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
- OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
- OBJECTS= $(OBJECTS-y) $(obj)/misc.o
--OBJCOPYFLAGS = -O binary --remove-section=.bss
-+#OBJCOPYFLAGS = -O binary --remove-section=.bss
- 
- quiet_cmd_image = BUILD   $@
- cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
---- a/arch/cris/boot/Makefile
-+++ b/arch/cris/boot/Makefile
-@@ -5,7 +5,7 @@
- objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
- objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
- 
--OBJCOPYFLAGS = -O binary $(objcopyflags-y)
-+#OBJCOPYFLAGS = -O binary $(objcopyflags-y)
- 
- 
- subdir- := compressed rescue
-@@ -17,7 +17,7 @@ $(obj)/Image: vmlinux FORCE
- 
- $(obj)/compressed/vmlinux: $(obj)/Image FORCE
- 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
--	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-+#	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
- 
- $(obj)/zImage:  $(obj)/compressed/vmlinux
- 	@cp $< $@
---- a/arch/cris/boot/rescue/Makefile
-+++ b/arch/cris/boot/rescue/Makefile
-@@ -14,7 +14,7 @@ arch-$(CONFIG_ETRAX_ARCH_V10) = v10
- arch-$(CONFIG_ETRAX_ARCH_V32) = v32
- 
- ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
--OBJCOPYFLAGS = -O binary --remove-section=.bss
-+#OBJCOPYFLAGS = -O binary --remove-section=.bss
- obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
- obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
- OBJECTS := $(obj-y)
---- a/arch/cris/Makefile
-+++ b/arch/cris/Makefile
-@@ -40,7 +40,7 @@ endif
- 
- LD = $(CROSS_COMPILE)ld -mcrislinux
- 
--OBJCOPYFLAGS := -O binary -R .note -R .comment -S
-+OBJCOPYFLAGS := -O binary -R .bss -R .note -R .note.gnu.build-id -R .comment -S
- 
- KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc)
- KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc)
diff --git a/target/linux/etrax/patches-2.6.32/201-flashsize.patch b/target/linux/etrax/patches-2.6.32/201-flashsize.patch
deleted file mode 100644
index 42a467f..0000000
--- a/target/linux/etrax/patches-2.6.32/201-flashsize.patch
+++ /dev/null
@@ -1,88 +0,0 @@
---- a/arch/cris/arch-v10/drivers/axisflashmap.c
-+++ b/arch/cris/arch-v10/drivers/axisflashmap.c
-@@ -113,7 +113,7 @@ static struct map_info map_cse1 = {
- 
- /* If no partition-table was found, we use this default-set. */
- #define MAX_PARTITIONS         7
--#define NUM_DEFAULT_PARTITIONS 3
-+#define NUM_DEFAULT_PARTITIONS 2
- 
- /*
-  * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
-@@ -122,19 +122,14 @@ static struct map_info map_cse1 = {
-  */
- static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
- 	{
--		.name = "boot firmware",
--		.size = CONFIG_ETRAX_PTABLE_SECTOR,
--		.offset = 0
--	},
--	{
- 		.name = "kernel",
--		.size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
--		.offset = CONFIG_ETRAX_PTABLE_SECTOR
-+		.size = 0x00,
-+		.offset = 0
- 	},
- 	{
--		.name = "filesystem",
--		.size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
--		.offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
-+		.name = "rootfs",
-+		.size = 0x200000,
-+		.offset = 0x200000
- 	}
- };
- 
-@@ -281,6 +276,11 @@ static int __init init_axis_flash(void)
- 	struct partitiontable_entry *ptable;
- 	int use_default_ptable = 1; /* Until proven otherwise. */
- 	const char pmsg[] = "  /dev/flash%d at 0x%08x, size 0x%08x\n";
-+	unsigned int kernel_part_size = 0;
-+	unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR);
-+	unsigned int flash_scan_count = 0;
-+	const char *part_magic = "ACME_PART_MAGIC";
-+	unsigned int magic_len = strlen(part_magic);
- 
- 	if (!(mymtd = flash_probe())) {
- 		/* There's no reason to use this module if no flash chip can
-@@ -293,6 +293,31 @@ static int __init init_axis_flash(void)
- 		axisflash_mtd = mymtd;
- 	}
- 
-+	/* scan flash to findout where out partition starts */
-+	
-+	printk(KERN_INFO "Scanning flash for end of kernel magic\n");
-+	for(flash_scan_count = 0; flash_scan_count < 100000; flash_scan_count++) {
-+		if(strncmp(&flash_mem[flash_scan_count], part_magic, magic_len - 1) == 0) {
-+			kernel_part_size = flash_mem[flash_scan_count + magic_len ];
-+			kernel_part_size <<= 8;
-+			kernel_part_size += flash_mem[flash_scan_count + magic_len + 2];
-+			kernel_part_size <<= 8;
-+			kernel_part_size += flash_mem[flash_scan_count + magic_len + 1];
-+			kernel_part_size <<= 8;
-+			kernel_part_size += flash_mem[flash_scan_count + magic_len + 3];
-+			printk(KERN_INFO "Kernel ends at 0x%.08X\n", kernel_part_size);
-+			flash_scan_count = 1100000;
-+		}
-+	}
-+	
-+	
-+	if(kernel_part_size){
-+		kernel_part_size = (kernel_part_size & 0xffff0000);
-+		axis_default_partitions[0].size = kernel_part_size;
-+		axis_default_partitions[1].size =  mymtd->size - axis_default_partitions[0].size;
-+		axis_default_partitions[1].offset = axis_default_partitions[0].size;
-+	}
-+
- 	if (mymtd) {
- 		mymtd->owner = THIS_MODULE;
- 		ptable_head = (struct partitiontable_head *)(FLASH_CACHED_ADDR +
---- a/arch/cris/arch-v10/lib/hw_settings.S
-+++ b/arch/cris/arch-v10/lib/hw_settings.S
-@@ -60,3 +60,5 @@
- 	.dword R_PORT_PB_SET
- 	.dword PB_SET_VALUE
- 	.dword 0 ; No more register values
-+	.ascii "ACME_PART_MAGIC" 
-+	.dword 0xdeadc0de
diff --git a/target/linux/etrax/patches-2.6.32/300-usb_support.patch b/target/linux/etrax/patches-2.6.32/300-usb_support.patch
deleted file mode 100644
index 681bccc..0000000
--- a/target/linux/etrax/patches-2.6.32/300-usb_support.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
- obj-$(CONFIG_USB_XHCI_HCD)	+= xhci.o
- obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
- obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
-+obj-$(CONFIG_ETRAX_USB_HOST)	+= hc-crisv10.o
- obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
- obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
- obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_USB_U132_HCD)	+= host/
- obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
- obj-$(CONFIG_USB_HWA_HCD)	+= host/
- obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
-+obj-$(CONFIG_ETRAX_USB_HOST)	+= host/
- 
- obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
- 
diff --git a/target/linux/etrax/patches-2.6.32/400-Kconfig_source.patch b/target/linux/etrax/patches-2.6.32/400-Kconfig_source.patch
deleted file mode 100644
index 16f87e8..0000000
--- a/target/linux/etrax/patches-2.6.32/400-Kconfig_source.patch
+++ /dev/null
@@ -1,86 +0,0 @@
---- a/arch/cris/Kconfig
-+++ b/arch/cris/Kconfig
-@@ -649,6 +649,8 @@ endchoice
- 
- endmenu
- 
-+menu "Device Drivers"
-+
- source "drivers/base/Kconfig"
- 
- # standard linux drivers
-@@ -660,13 +662,19 @@ source "drivers/pnp/Kconfig"
- 
- source "drivers/block/Kconfig"
- 
-+# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-+
-+source "drivers/misc/Kconfig"
-+
- source "drivers/ide/Kconfig"
- 
--source "drivers/net/Kconfig"
-+source "drivers/scsi/Kconfig"
- 
--source "drivers/i2c/Kconfig"
-+source "drivers/ata/Kconfig"
- 
--source "drivers/rtc/Kconfig"
-+source "drivers/net/Kconfig"
-+
-+source "drivers/isdn/Kconfig"
- 
- #
- # input before char - char/joystick depends on it. As does USB.
-@@ -675,14 +683,50 @@ source "drivers/input/Kconfig"
- 
- source "drivers/char/Kconfig"
- 
--source "fs/Kconfig"
-+source "drivers/i2c/Kconfig"
-+
-+#source "drivers/spi/Kconfig"
-+
-+source "drivers/gpio/Kconfig"
-+
-+source "drivers/w1/Kconfig"
-+
-+source "drivers/power/Kconfig"
-+
-+source "drivers/hwmon/Kconfig"
-+
-+source "drivers/thermal/Kconfig"
-+
-+source "drivers/watchdog/Kconfig"
-+
-+source "drivers/ssb/Kconfig"
-+
-+#source "drivers/l3/Kconfig"
-+
-+source "drivers/mfd/Kconfig"
-+
-+source "drivers/media/Kconfig"
-+
-+source "drivers/video/Kconfig"
-+
-+source "sound/Kconfig"
-+
-+source "drivers/hid/Kconfig"
- 
- source "drivers/usb/Kconfig"
- 
- source "drivers/uwb/Kconfig"
- 
-+source "drivers/leds/Kconfig"
-+
-+source "drivers/rtc/Kconfig"
-+
- source "drivers/staging/Kconfig"
- 
-+endmenu
-+ 
-+source "fs/Kconfig"
-+
- source "arch/cris/Kconfig.debug"
- 
- source "security/Kconfig"
diff --git a/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch
deleted file mode 100644
index 16f9b93..0000000
--- a/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/arch/cris/arch-v10/drivers/Kconfig
-+++ b/arch/cris/arch-v10/drivers/Kconfig
-@@ -450,11 +450,31 @@ config ETRAX_I2C
- 	  i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
- 	  val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
- 
-+config ETRAX_I2C_GVC
-+	bool "I2C GVC support"
-+	depends on ETRAX_ARCH_V10 && !ETRAX_I2C
-+	select ETRAX_I2C_USES_PB_NOT_PB_I2C
-+	help
-+	  Enables an I2C driver with Geert Vancompernolle improvement.
-+
-+config ETRAX_I2C_SLAVE_DELAY
-+	bool "I2C Slave delay support"
-+	depends on ETRAX_I2C_GVC  && EXPERIMENTAL
-+	help
-+	  Enable this to enhanced master/slave dialog
-+	  Improvement by Positive Going (www.positivegoing.it) and BK srl (www.b-k.it)
-+
-+config ETRAX_I2C_DYN_ALLOC
-+	bool "I2C major device dynamic alloc"
-+	depends on ETRAX_I2C_GVC && EXPERIMENTAL
-+	help
-+	  Enable this to dynamicaly alloc major i2c device number
-+
- # this is true for most products since PB-I2C seems to be somewhat
- # flawed..
- config ETRAX_I2C_USES_PB_NOT_PB_I2C
- 	bool "I2C uses PB not PB-I2C"
--	depends on ETRAX_I2C
-+	depends on ETRAX_I2C || ETRAX_I2C_GVC
- 	help
- 	  Select whether to use the special I2C mode in the PB I/O register or
- 	  not.  This option needs to be selected in order to use some drivers
-@@ -478,7 +498,7 @@ config ETRAX_I2C_CLK_PORT
- 
- config ETRAX_I2C_EEPROM
- 	bool "I2C EEPROM (non-volatile RAM) support"
--	depends on ETRAX_I2C
-+	depends on ETRAX_I2C || ETRAX_I2C_GVC
- 	help
- 	  Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
- 	  driver.  Select size option: Probed, 2k, 8k, 16k.
---- a/arch/cris/arch-v10/drivers/Makefile
-+++ b/arch/cris/arch-v10/drivers/Makefile
-@@ -4,6 +4,7 @@
- 
- obj-$(CONFIG_ETRAX_AXISFLASHMAP)	+= axisflashmap.o
- obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
-+obj-$(CONFIG_ETRAX_I2C_GVC)		+= i2c_gvc.o
- obj-$(CONFIG_ETRAX_I2C_EEPROM)		+= eeprom.o
- obj-$(CONFIG_ETRAX_GPIO)		+= gpio.o
- obj-$(CONFIG_ETRAX_DS1302)		+= ds1302.o
diff --git a/target/linux/etrax/patches-2.6.32/600-create-device-serial.patch b/target/linux/etrax/patches-2.6.32/600-create-device-serial.patch
deleted file mode 100644
index 58817e0..0000000
--- a/target/linux/etrax/patches-2.6.32/600-create-device-serial.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/drivers/serial/crisv10.c
-+++ b/drivers/serial/crisv10.c
-@@ -32,6 +32,7 @@ static char *serial_version = "$Revision
- #include <linux/module.h>
- #include <linux/uaccess.h>
- #include <linux/io.h>
-+#include <linux/device.h>
- 
- #include <asm/irq.h>
- #include <asm/dma.h>
-@@ -4415,6 +4416,8 @@ static const struct tty_operations rs_op
- #endif
- };
- 
-+static struct class *rs_class;
-+
- static int __init rs_init(void)
- {
- 	int i;
-@@ -4548,6 +4551,24 @@ static int __init rs_init(void)
- #endif
- #endif /* CONFIG_SVINTO_SIM */
- 
-+	rs_class = class_create(THIS_MODULE, "rs_tty");
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0 
-+	device_create(rs_class, NULL,
-+		MKDEV(TTY_MAJOR, 64), NULL, "ttyS0");
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1 
-+	device_create(rs_class, NULL,
-+		MKDEV(TTY_MAJOR, 65), NULL, "ttyS1");
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2 
-+	device_create(rs_class, NULL,
-+		MKDEV(TTY_MAJOR, 66), NULL, "ttyS2");
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3 
-+	device_create(rs_class, NULL,
-+		MKDEV(TTY_MAJOR, 67), NULL, "ttyS3");
-+#endif
-+
- 	return 0;
- }
- 
diff --git a/target/linux/etrax/patches-2.6.32/610-create-the-gpio-devices.patch b/target/linux/etrax/patches-2.6.32/610-create-the-gpio-devices.patch
deleted file mode 100644
index 27e13c2..0000000
--- a/target/linux/etrax/patches-2.6.32/610-create-the-gpio-devices.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/cris/arch-v10/drivers/gpio.c
-+++ b/arch/cris/arch-v10/drivers/gpio.c
-@@ -21,6 +21,7 @@
- #include <linux/poll.h>
- #include <linux/init.h>
- #include <linux/interrupt.h>
-+#include <linux/device.h>
- 
- #include <asm/etraxgpio.h>
- #include <arch/svinto.h>
-@@ -771,6 +772,8 @@ static void ioif_watcher(const unsigned 
- 
- /* main driver initialization routine, called from mem.c */
- 
-+static struct class *gp_class;
-+
- static int __init gpio_init(void)
- {
- 	int res;
-@@ -784,6 +787,8 @@ static int __init gpio_init(void)
- 		return res;
- 	}
- 
-+	gp_class = class_create(THIS_MODULE, "gpio_etrax");
-+
- 	/* Clear all leds */
- #if defined (CONFIG_ETRAX_CSP0_LEDS) ||  defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS)
- 	CRIS_LED_NETWORK_SET(0);
-@@ -796,6 +801,8 @@ static int __init gpio_init(void)
- 		CRIS_LED_BIT_SET(i);
- #endif
- 
-+	device_create(gp_class, NULL,
-+		MKDEV(GPIO_MAJOR, 2), NULL, "leds");
- #endif
- 	/* The I/O interface allocation watcher will be called when
- 	 * registering it. */
-@@ -822,6 +829,12 @@ static int __init gpio_init(void)
- 	if (res)
- 		printk(KERN_CRIT "err: PA irq for gpio\n");
- 
-+	device_create(gp_class, NULL,
-+		MKDEV(GPIO_MAJOR, 0), NULL, "gpioa");
-+	device_create(gp_class, NULL,
-+		MKDEV(GPIO_MAJOR, 1), NULL, "gpiob");
-+	device_create(gp_class, NULL,
-+		MKDEV(GPIO_MAJOR, 3), NULL, "gpiog");
- 	return res;
- }
- 
diff --git a/target/linux/etrax/patches-2.6.32/620-create-the-i2c-devices.patch b/target/linux/etrax/patches-2.6.32/620-create-the-i2c-devices.patch
deleted file mode 100644
index 9c2e37a..0000000
--- a/target/linux/etrax/patches-2.6.32/620-create-the-i2c-devices.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/cris/arch-v10/drivers/i2c.c
-+++ b/arch/cris/arch-v10/drivers/i2c.c
-@@ -21,6 +21,7 @@
- #include <linux/fs.h>
- #include <linux/string.h>
- #include <linux/init.h>
-+#include <linux/device.h>
- 
- #include <asm/etraxi2c.h>
- 
-@@ -678,6 +679,8 @@ i2c_init(void)
- 	return res;
- }
- 
-+static struct class *i2c_class;
-+
- static int __init
- i2c_register(void)
- {
-@@ -693,7 +696,11 @@ i2c_register(void)
- 	}
- 
- 	printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n");
--	
-+
-+	i2c_class = class_create(THIS_MODULE, "i2c_etrax");
-+	device_create(i2c_class, NULL,
-+		MKDEV(I2C_MAJOR, 0), NULL, "i2c");
-+
- 	return 0;
- }
- 
diff --git a/target/linux/etrax/patches-2.6.32/985-cris-headers.patch b/target/linux/etrax/patches-2.6.32/985-cris-headers.patch
deleted file mode 100644
index 73ede93..0000000
--- a/target/linux/etrax/patches-2.6.32/985-cris-headers.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/cris/include/arch-v10/arch/Kbuild
-+++ b/arch/cris/include/arch-v10/arch/Kbuild
-@@ -1,3 +1,5 @@
-+header-y += elf.h
-+header-y += ptrace.h
- header-y += user.h
- header-y += svinto.h
- header-y += sv_addr_ag.h
---- a/arch/cris/include/asm/Kbuild
-+++ b/arch/cris/include/asm/Kbuild
-@@ -1,11 +1,14 @@
- include include/asm-generic/Kbuild.asm
- 
--header-y += arch-v10/
--header-y += arch-v32/
-+header-y += ../arch-v10/arch/
-+header-y += ../arch-v32/arch/
- 
-+header-y += elf.h
- header-y += ethernet.h
-+header-y += page.h
- header-y += rtc.h
- header-y += sync_serial.h
-+header-y += user.h
- 
- unifdef-y += etraxgpio.h
- unifdef-y += rs485.h