etrax: 2.6.32 support

SVN-Revision: 19543

9 files changed, 449 insertions, 0 deletions

diff --git a/target/linux/etrax/patches-2.6.32/100-cris-makefiles.patch b/target/linux/etrax/patches-2.6.32/100-cris-makefiles.patch
new file mode 100644
index 0000000..f837ff5
--- /dev/null
+++ b/target/linux/etrax/patches-2.6.32/100-cris-makefiles.patch
@@ -0,0 +1,53 @@
+--- a/arch/cris/boot/compressed/Makefile
++++ b/arch/cris/boot/compressed/Makefile
+@@ -18,7 +18,7 @@ ldflags-y += -T $(srctree)/$(src)/decomp
+ OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+ OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+ OBJECTS= $(OBJECTS-y) $(obj)/misc.o
+-OBJCOPYFLAGS = -O binary --remove-section=.bss
++#OBJCOPYFLAGS = -O binary --remove-section=.bss
+ 
+ quiet_cmd_image = BUILD   $@
+ cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
+--- a/arch/cris/boot/Makefile
++++ b/arch/cris/boot/Makefile
+@@ -5,7 +5,7 @@
+ objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+ objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+ 
+-OBJCOPYFLAGS = -O binary $(objcopyflags-y)
++#OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+ 
+ 
+ subdir- := compressed rescue
+@@ -17,7 +17,7 @@ $(obj)/Image: vmlinux FORCE
+ 
+ $(obj)/compressed/vmlinux: $(obj)/Image FORCE
+ 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+-	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
++#	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
+ 
+ $(obj)/zImage:  $(obj)/compressed/vmlinux
+ 	@cp $< $@
+--- a/arch/cris/boot/rescue/Makefile
++++ b/arch/cris/boot/rescue/Makefile
+@@ -14,7 +14,7 @@ arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+ arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+ 
+ ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
+-OBJCOPYFLAGS = -O binary --remove-section=.bss
++#OBJCOPYFLAGS = -O binary --remove-section=.bss
+ obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+ obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+ OBJECTS := $(obj-y)
+--- a/arch/cris/Makefile
++++ b/arch/cris/Makefile
+@@ -40,7 +40,7 @@ endif
+ 
+ LD = $(CROSS_COMPILE)ld -mcrislinux
+ 
+-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
++OBJCOPYFLAGS := -O binary -R .bss -R .note -R .note.gnu.build-id -R .comment -S
+ 
+ CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
+ 
diff --git a/target/linux/etrax/patches-2.6.32/200-samsung_flash.patch b/target/linux/etrax/patches-2.6.32/200-samsung_flash.patch
new file mode 100644
index 0000000..4176ec3
--- /dev/null
+++ b/target/linux/etrax/patches-2.6.32/200-samsung_flash.patch
@@ -0,0 +1,11 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -385,7 +385,7 @@ struct mtd_info *cfi_cmdset_0002(struct 
+ 
+ 		cfi_fixup_major_minor(cfi, extp);
+ 
+-		if (extp->MajorVersion != '1' ||
++		if (extp->MajorVersion < '0' || extp->MajorVersion > '3' ||
+ 		    (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
+ 		        if (cfi->mfr == MANUFACTURER_SAMSUNG &&
+ 			    (extp->MajorVersion == '3' && extp->MinorVersion == '3')) {
diff --git a/target/linux/etrax/patches-2.6.32/201-flashsize.patch b/target/linux/etrax/patches-2.6.32/201-flashsize.patch
new file mode 100644
index 0000000..42a467f
--- /dev/null
+++ b/target/linux/etrax/patches-2.6.32/201-flashsize.patch
@@ -0,0 +1,88 @@
+--- a/arch/cris/arch-v10/drivers/axisflashmap.c
++++ b/arch/cris/arch-v10/drivers/axisflashmap.c
+@@ -113,7 +113,7 @@ static struct map_info map_cse1 = {
+ 
+ /* If no partition-table was found, we use this default-set. */
+ #define MAX_PARTITIONS         7
+-#define NUM_DEFAULT_PARTITIONS 3
++#define NUM_DEFAULT_PARTITIONS 2
+ 
+ /*
+  * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
+@@ -122,19 +122,14 @@ static struct map_info map_cse1 = {
+  */
+ static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
+ 	{
+-		.name = "boot firmware",
+-		.size = CONFIG_ETRAX_PTABLE_SECTOR,
+-		.offset = 0
+-	},
+-	{
+ 		.name = "kernel",
+-		.size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
+-		.offset = CONFIG_ETRAX_PTABLE_SECTOR
++		.size = 0x00,
++		.offset = 0
+ 	},
+ 	{
+-		.name = "filesystem",
+-		.size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
+-		.offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
++		.name = "rootfs",
++		.size = 0x200000,
++		.offset = 0x200000
+ 	}
+ };
+ 
+@@ -281,6 +276,11 @@ static int __init init_axis_flash(void)
+ 	struct partitiontable_entry *ptable;
+ 	int use_default_ptable = 1; /* Until proven otherwise. */
+ 	const char pmsg[] = "  /dev/flash%d at 0x%08x, size 0x%08x\n";
++	unsigned int kernel_part_size = 0;
++	unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR);
++	unsigned int flash_scan_count = 0;
++	const char *part_magic = "ACME_PART_MAGIC";
++	unsigned int magic_len = strlen(part_magic);
+ 
+ 	if (!(mymtd = flash_probe())) {
+ 		/* There's no reason to use this module if no flash chip can
+@@ -293,6 +293,31 @@ static int __init init_axis_flash(void)
+ 		axisflash_mtd = mymtd;
+ 	}
+ 
++	/* scan flash to findout where out partition starts */
++	
++	printk(KERN_INFO "Scanning flash for end of kernel magic\n");
++	for(flash_scan_count = 0; flash_scan_count < 100000; flash_scan_count++) {
++		if(strncmp(&flash_mem[flash_scan_count], part_magic, magic_len - 1) == 0) {
++			kernel_part_size = flash_mem[flash_scan_count + magic_len ];
++			kernel_part_size <<= 8;
++			kernel_part_size += flash_mem[flash_scan_count + magic_len + 2];
++			kernel_part_size <<= 8;
++			kernel_part_size += flash_mem[flash_scan_count + magic_len + 1];
++			kernel_part_size <<= 8;
++			kernel_part_size += flash_mem[flash_scan_count + magic_len + 3];
++			printk(KERN_INFO "Kernel ends at 0x%.08X\n", kernel_part_size);
++			flash_scan_count = 1100000;
++		}
++	}
++	
++	
++	if(kernel_part_size){
++		kernel_part_size = (kernel_part_size & 0xffff0000);
++		axis_default_partitions[0].size = kernel_part_size;
++		axis_default_partitions[1].size =  mymtd->size - axis_default_partitions[0].size;
++		axis_default_partitions[1].offset = axis_default_partitions[0].size;
++	}
++
+ 	if (mymtd) {
+ 		mymtd->owner = THIS_MODULE;
+ 		ptable_head = (struct partitiontable_head *)(FLASH_CACHED_ADDR +
+--- a/arch/cris/arch-v10/lib/hw_settings.S
++++ b/arch/cris/arch-v10/lib/hw_settings.S
+@@ -60,3 +60,5 @@
+ 	.dword R_PORT_PB_SET
+ 	.dword PB_SET_VALUE
+ 	.dword 0 ; No more register values
++	.ascii "ACME_PART_MAGIC" 
++	.dword 0xdeadc0de
diff --git a/target/linux/etrax/patches-2.6.32/300-usb_support.patch b/target/linux/etrax/patches-2.6.32/300-usb_support.patch
new file mode 100644
index 0000000..7b29726
--- /dev/null
+++ b/target/linux/etrax/patches-2.6.32/300-usb_support.patch
@@ -0,0 +1,31 @@
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -25,6 +25,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
+ obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o
+ obj-$(CONFIG_USB_SL811_HCD)	+= sl811-hcd.o
+ obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
++obj-$(CONFIG_ETRAX_USB_HOST)	+= hc-crisv10.o
+ obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
+ obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
+ obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_USB_U132_HCD)	+= host/
+ obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
+ obj-$(CONFIG_USB_HWA_HCD)	+= host/
+ obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
++obj-$(CONFIG_ETRAX_USB_HOST)	+= host/
+ 
+ obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00/
+ 
+--- a/arch/cris/arch-v10/drivers/Kconfig
++++ b/arch/cris/arch-v10/drivers/Kconfig
+@@ -410,7 +410,7 @@ config ETRAX_RS485_DISABLE_RECEIVER
+ 	  Axis 2400/2401 must disable receiver.
+ 
+ config ETRAX_USB_HOST
+-	bool "USB host"
++	tristate "ETRAX USB host"
+ 	select USB
+ 	help
+ 	   This option enables the host functionality of the ETRAX 100LX
diff --git a/target/linux/etrax/patches-2.6.32/400-Kconfig_source.patch b/target/linux/etrax/patches-2.6.32/400-Kconfig_source.patch
new file mode 100644
index 0000000..16f87e8
--- /dev/null
+++ b/target/linux/etrax/patches-2.6.32/400-Kconfig_source.patch
@@ -0,0 +1,86 @@
+--- a/arch/cris/Kconfig
++++ b/arch/cris/Kconfig
+@@ -649,6 +649,8 @@ endchoice
+ 
+ endmenu
+ 
++menu "Device Drivers"
++
+ source "drivers/base/Kconfig"
+ 
+ # standard linux drivers
+@@ -660,13 +662,19 @@ source "drivers/pnp/Kconfig"
+ 
+ source "drivers/block/Kconfig"
+ 
++# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
++
++source "drivers/misc/Kconfig"
++
+ source "drivers/ide/Kconfig"
+ 
+-source "drivers/net/Kconfig"
++source "drivers/scsi/Kconfig"
+ 
+-source "drivers/i2c/Kconfig"
++source "drivers/ata/Kconfig"
+ 
+-source "drivers/rtc/Kconfig"
++source "drivers/net/Kconfig"
++
++source "drivers/isdn/Kconfig"
+ 
+ #
+ # input before char - char/joystick depends on it. As does USB.
+@@ -675,14 +683,50 @@ source "drivers/input/Kconfig"
+ 
+ source "drivers/char/Kconfig"
+ 
+-source "fs/Kconfig"
++source "drivers/i2c/Kconfig"
++
++#source "drivers/spi/Kconfig"
++
++source "drivers/gpio/Kconfig"
++
++source "drivers/w1/Kconfig"
++
++source "drivers/power/Kconfig"
++
++source "drivers/hwmon/Kconfig"
++
++source "drivers/thermal/Kconfig"
++
++source "drivers/watchdog/Kconfig"
++
++source "drivers/ssb/Kconfig"
++
++#source "drivers/l3/Kconfig"
++
++source "drivers/mfd/Kconfig"
++
++source "drivers/media/Kconfig"
++
++source "drivers/video/Kconfig"
++
++source "sound/Kconfig"
++
++source "drivers/hid/Kconfig"
+ 
+ source "drivers/usb/Kconfig"
+ 
+ source "drivers/uwb/Kconfig"
+ 
++source "drivers/leds/Kconfig"
++
++source "drivers/rtc/Kconfig"
++
+ source "drivers/staging/Kconfig"
+ 
++endmenu
++ 
++source "fs/Kconfig"
++
+ source "arch/cris/Kconfig.debug"
+ 
+ source "security/Kconfig"
diff --git a/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch
new file mode 100644
index 0000000..16f9b93
--- /dev/null
+++ b/target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch
@@ -0,0 +1,54 @@
+--- a/arch/cris/arch-v10/drivers/Kconfig
++++ b/arch/cris/arch-v10/drivers/Kconfig
+@@ -450,11 +450,31 @@ config ETRAX_I2C
+ 	  i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
+ 	  val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
+ 
++config ETRAX_I2C_GVC
++	bool "I2C GVC support"
++	depends on ETRAX_ARCH_V10 && !ETRAX_I2C
++	select ETRAX_I2C_USES_PB_NOT_PB_I2C
++	help
++	  Enables an I2C driver with Geert Vancompernolle improvement.
++
++config ETRAX_I2C_SLAVE_DELAY
++	bool "I2C Slave delay support"
++	depends on ETRAX_I2C_GVC  && EXPERIMENTAL
++	help
++	  Enable this to enhanced master/slave dialog
++	  Improvement by Positive Going (www.positivegoing.it) and BK srl (www.b-k.it)
++
++config ETRAX_I2C_DYN_ALLOC
++	bool "I2C major device dynamic alloc"
++	depends on ETRAX_I2C_GVC && EXPERIMENTAL
++	help
++	  Enable this to dynamicaly alloc major i2c device number
++
+ # this is true for most products since PB-I2C seems to be somewhat
+ # flawed..
+ config ETRAX_I2C_USES_PB_NOT_PB_I2C
+ 	bool "I2C uses PB not PB-I2C"
+-	depends on ETRAX_I2C
++	depends on ETRAX_I2C || ETRAX_I2C_GVC
+ 	help
+ 	  Select whether to use the special I2C mode in the PB I/O register or
+ 	  not.  This option needs to be selected in order to use some drivers
+@@ -478,7 +498,7 @@ config ETRAX_I2C_CLK_PORT
+ 
+ config ETRAX_I2C_EEPROM
+ 	bool "I2C EEPROM (non-volatile RAM) support"
+-	depends on ETRAX_I2C
++	depends on ETRAX_I2C || ETRAX_I2C_GVC
+ 	help
+ 	  Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
+ 	  driver.  Select size option: Probed, 2k, 8k, 16k.
+--- a/arch/cris/arch-v10/drivers/Makefile
++++ b/arch/cris/arch-v10/drivers/Makefile
+@@ -4,6 +4,7 @@
+ 
+ obj-$(CONFIG_ETRAX_AXISFLASHMAP)	+= axisflashmap.o
+ obj-$(CONFIG_ETRAX_I2C)			+= i2c.o
++obj-$(CONFIG_ETRAX_I2C_GVC)		+= i2c_gvc.o
+ obj-$(CONFIG_ETRAX_I2C_EEPROM)		+= eeprom.o
+ obj-$(CONFIG_ETRAX_GPIO)		+= gpio.o
+ obj-$(CONFIG_ETRAX_DS1302)		+= ds1302.o
diff --git a/target/linux/etrax/patches-2.6.32/600-create-device-serial.patch b/target/linux/etrax/patches-2.6.32/600-create-device-serial.patch
new file mode 100644
index 0000000..516b984
--- /dev/null
+++ b/target/linux/etrax/patches-2.6.32/600-create-device-serial.patch
@@ -0,0 +1,44 @@
+--- a/drivers/serial/crisv10.c
++++ b/drivers/serial/crisv10.c
+@@ -31,6 +31,7 @@ static char *serial_version = "$Revision
+ #include <linux/module.h>
+ #include <linux/uaccess.h>
+ #include <linux/io.h>
++#include <linux/device.h>
+ 
+ #include <asm/irq.h>
+ #include <asm/dma.h>
+@@ -4414,6 +4415,8 @@ static const struct tty_operations rs_op
+ #endif
+ };
+ 
++static struct class *rs_class;
++
+ static int __init rs_init(void)
+ {
+ 	int i;
+@@ -4547,6 +4550,24 @@ static int __init rs_init(void)
+ #endif
+ #endif /* CONFIG_SVINTO_SIM */
+ 
++	rs_class = class_create(THIS_MODULE, "rs_tty");
++#ifdef CONFIG_ETRAX_SERIAL_PORT0 
++	device_create(rs_class, NULL,
++		MKDEV(TTY_MAJOR, 64), NULL, "ttyS0");
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT1 
++	device_create(rs_class, NULL,
++		MKDEV(TTY_MAJOR, 65), NULL, "ttyS1");
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT2 
++	device_create(rs_class, NULL,
++		MKDEV(TTY_MAJOR, 66), NULL, "ttyS2");
++#endif
++#ifdef CONFIG_ETRAX_SERIAL_PORT3 
++	device_create(rs_class, NULL,
++		MKDEV(TTY_MAJOR, 67), NULL, "ttyS3");
++#endif
++
+ 	return 0;
+ }
+ 
diff --git a/target/linux/etrax/patches-2.6.32/610-create-the-gpio-devices.patch b/target/linux/etrax/patches-2.6.32/610-create-the-gpio-devices.patch
new file mode 100644
index 0000000..27e13c2
--- /dev/null
+++ b/target/linux/etrax/patches-2.6.32/610-create-the-gpio-devices.patch
@@ -0,0 +1,50 @@
+--- a/arch/cris/arch-v10/drivers/gpio.c
++++ b/arch/cris/arch-v10/drivers/gpio.c
+@@ -21,6 +21,7 @@
+ #include <linux/poll.h>
+ #include <linux/init.h>
+ #include <linux/interrupt.h>
++#include <linux/device.h>
+ 
+ #include <asm/etraxgpio.h>
+ #include <arch/svinto.h>
+@@ -771,6 +772,8 @@ static void ioif_watcher(const unsigned 
+ 
+ /* main driver initialization routine, called from mem.c */
+ 
++static struct class *gp_class;
++
+ static int __init gpio_init(void)
+ {
+ 	int res;
+@@ -784,6 +787,8 @@ static int __init gpio_init(void)
+ 		return res;
+ 	}
+ 
++	gp_class = class_create(THIS_MODULE, "gpio_etrax");
++
+ 	/* Clear all leds */
+ #if defined (CONFIG_ETRAX_CSP0_LEDS) ||  defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS)
+ 	CRIS_LED_NETWORK_SET(0);
+@@ -796,6 +801,8 @@ static int __init gpio_init(void)
+ 		CRIS_LED_BIT_SET(i);
+ #endif
+ 
++	device_create(gp_class, NULL,
++		MKDEV(GPIO_MAJOR, 2), NULL, "leds");
+ #endif
+ 	/* The I/O interface allocation watcher will be called when
+ 	 * registering it. */
+@@ -822,6 +829,12 @@ static int __init gpio_init(void)
+ 	if (res)
+ 		printk(KERN_CRIT "err: PA irq for gpio\n");
+ 
++	device_create(gp_class, NULL,
++		MKDEV(GPIO_MAJOR, 0), NULL, "gpioa");
++	device_create(gp_class, NULL,
++		MKDEV(GPIO_MAJOR, 1), NULL, "gpiob");
++	device_create(gp_class, NULL,
++		MKDEV(GPIO_MAJOR, 3), NULL, "gpiog");
+ 	return res;
+ }
+ 
diff --git a/target/linux/etrax/patches-2.6.32/620-create-the-i2c-devices.patch b/target/linux/etrax/patches-2.6.32/620-create-the-i2c-devices.patch
new file mode 100644
index 0000000..9c2e37a
--- /dev/null
+++ b/target/linux/etrax/patches-2.6.32/620-create-the-i2c-devices.patch
@@ -0,0 +1,32 @@
+--- a/arch/cris/arch-v10/drivers/i2c.c
++++ b/arch/cris/arch-v10/drivers/i2c.c
+@@ -21,6 +21,7 @@
+ #include <linux/fs.h>
+ #include <linux/string.h>
+ #include <linux/init.h>
++#include <linux/device.h>
+ 
+ #include <asm/etraxi2c.h>
+ 
+@@ -678,6 +679,8 @@ i2c_init(void)
+ 	return res;
+ }
+ 
++static struct class *i2c_class;
++
+ static int __init
+ i2c_register(void)
+ {
+@@ -693,7 +696,11 @@ i2c_register(void)
+ 	}
+ 
+ 	printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n");
+-	
++
++	i2c_class = class_create(THIS_MODULE, "i2c_etrax");
++	device_create(i2c_class, NULL,
++		MKDEV(I2C_MAJOR, 0), NULL, "i2c");
++
+ 	return 0;
+ }
+