summaryrefslogtreecommitdiff
path: root/target/linux/etrax/patches/cris/003-drivers-cris.patch
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2008-05-03 15:48:42 +0000
committerJohn Crispin <john@openwrt.org>2008-05-03 15:48:42 +0000
commit6720686d55dd6f13cf527c087f67ee27cb74592a (patch)
tree09a73636f1e9dbba98aedd5b2794d67576c58766 /target/linux/etrax/patches/cris/003-drivers-cris.patch
parentc4f78ab7955a4de798cd051c1aa4173c2d817cb3 (diff)
downloadmtk-20170518-6720686d55dd6f13cf527c087f67ee27cb74592a.zip
mtk-20170518-6720686d55dd6f13cf527c087f67ee27cb74592a.tar.gz
mtk-20170518-6720686d55dd6f13cf527c087f67ee27cb74592a.tar.bz2
remove old etrax patches
SVN-Revision: 11027
Diffstat (limited to 'target/linux/etrax/patches/cris/003-drivers-cris.patch')
-rw-r--r--target/linux/etrax/patches/cris/003-drivers-cris.patch22601
1 files changed, 0 insertions, 22601 deletions
diff --git a/target/linux/etrax/patches/cris/003-drivers-cris.patch b/target/linux/etrax/patches/cris/003-drivers-cris.patch
deleted file mode 100644
index 1f42fc8..0000000
--- a/target/linux/etrax/patches/cris/003-drivers-cris.patch
+++ /dev/null
@@ -1,22601 +0,0 @@
-diff -urN linux-2.6.19.2.orig/drivers/ide/cris/ide-cris.c linux-2.6.19.2.dev/drivers/ide/cris/ide-cris.c
---- linux-2.6.19.2.orig/drivers/ide/cris/ide-cris.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/ide/cris/ide-cris.c 2006-12-06 14:17:02.000000000 +0100
-@@ -1,8 +1,8 @@
--/* $Id: cris-ide-driver.patch,v 1.1 2005/06/29 21:39:07 akpm Exp $
-+/* $Id: ide-cris.c,v 1.10 2006/12/06 13:17:02 starvik Exp $
- *
- * Etrax specific IDE functions, like init and PIO-mode setting etc.
- * Almost the entire ide.c is used for the rest of the Etrax ATA driver.
-- * Copyright (c) 2000-2005 Axis Communications AB
-+ * Copyright (c) 2000-2006 Axis Communications AB
- *
- * Authors: Bjorn Wesen (initial version)
- * Mikael Starvik (crisv32 port)
-@@ -43,8 +43,8 @@
-
- #define IDE_REGISTER_TIMEOUT 300
-
--#define LOWDB(x)
--#define D(x)
-+#define LOWDB(x)
-+#define D(x)
-
- enum /* Transfer types */
- {
-@@ -88,12 +88,50 @@
- #define ATA_PIO0_STROBE 39
- #define ATA_PIO0_HOLD 9
-
--int
-+/*
-+ * On ETRAX FS, an interrupt remains latched and active until ack:ed.
-+ * Further, ATA acks are without effect as long as INTRQ is asserted, as the
-+ * corresponding ATA interrupt is continuously set to active. There will be a
-+ * clearing ack at the usual cris_ide_ack_intr call, but that serves just to
-+ * gracefully handle an actual spurious interrupt or similar situation (which
-+ * will cause an early return without further actions, see the ide_intr
-+ * function).
-+ *
-+ * However, the normal case at time of this writing is that nothing has
-+ * changed from when INTRQ was asserted until the cris_ide_ack_intr call; no
-+ * ATA registers written and no status register read, so INTRQ will *remain*
-+ * asserted, thus *another* interrupt will be latched, and will be seen as a
-+ * spurious interrupt after the "real" interrupt is serviced. With lots of
-+ * ATA traffic (as in a trivial file-copy between two drives), this will trig
-+ * the condition desc->irqs_unhandled > 99900 in
-+ * kernel/irq/spurious.c:note_interrupt and the system will halt.
-+ *
-+ * To actually get rid of the interrupt corresponding to the current INTRQ
-+ * assertion, we make a second ack after the next ATA register read or write;
-+ * i.e. when INTRQ must be deasserted. At that time, we don't have the hwif
-+ * pointer available, so we need to stash a local copy (safe, because it'll be
-+ * set and cleared within the same spin_lock_irqsave region). The pointer
-+ * serves doubly as a boolean flag that an ack is needed. The caller must
-+ * NULL the pointer after the "second ack".
-+ */
-+
-+static ide_hwif_t *hwif_to_ack;
-+
-+static int
- cris_ide_ack_intr(ide_hwif_t* hwif)
- {
-- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2,
-+ /*
-+ * The interrupt is shared so we need to find the interface bit number
-+ * to ack. We define the ATA I/O register addresses to have the
-+ * format of ata rw_ctrl2 register contents, conveniently holding this
-+ * number.
-+ */
-+ reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2,
- int, hwif->io_ports[0]);
- REG_WR_INT(ata, regi_ata, rw_ack_intr, 1 << ctrl2.sel);
-+
-+ /* Prepare to ack again, see above. */
-+ hwif_to_ack = hwif;
- return 1;
- }
-
-@@ -122,8 +160,24 @@
-
- static void
- cris_ide_write_command(unsigned long command)
--{
-+{
- REG_WR_INT(ata, regi_ata, rw_ctrl2, command); /* write data to the drive's register */
-+
-+ /*
-+ * Perform a pending ack if needed; see hwif_ack definition. Perhaps
-+ * we should check closer that this call is really a part of the
-+ * preparation to read the ATA status register or write to the ATA
-+ * command register (causing deassert of INTRQ; see the ATA standard),
-+ * but at time of this writing (and expected to sanely remain so), the
-+ * first ATA register activity after an cris_ide_ack_intr call is
-+ * certain to do exactly that.
-+ */
-+ if (hwif_to_ack) {
-+ /* The drive may take this long to deassert INTRQ. */
-+ ndelay(400);
-+ cris_ide_ack_intr(hwif_to_ack);
-+ hwif_to_ack = NULL;
-+ }
- }
-
- static void
-@@ -160,8 +214,8 @@
- {
- reg_ata_rw_ctrl2 ctrl2 = {0};
- ctrl2.addr = addr;
-- ctrl2.cs1 = cs1;
-- ctrl2.cs0 = cs0;
-+ ctrl2.cs1 = !cs1;
-+ ctrl2.cs0 = !cs0;
- return REG_TYPE_CONV(int, reg_ata_rw_ctrl2, ctrl2);
- }
-
-@@ -184,14 +238,14 @@
-
- intr_mask.bus0 = regk_ata_yes;
- intr_mask.bus1 = regk_ata_yes;
-- intr_mask.bus2 = regk_ata_yes;
-+ intr_mask.bus2 = regk_ata_yes;
- intr_mask.bus3 = regk_ata_yes;
-
- REG_WR(ata, regi_ata, rw_intr_mask, intr_mask);
-
- crisv32_request_dma(2, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata);
- crisv32_request_dma(3, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata);
--
-+
- crisv32_pinmux_alloc_fixed(pinmux_ata);
- crisv32_pinmux_alloc_fixed(pinmux_ata0);
- crisv32_pinmux_alloc_fixed(pinmux_ata1);
-@@ -204,14 +258,15 @@
- DMA_ENABLE(regi_dma3);
-
- DMA_WR_CMD (regi_dma2, regk_dma_set_w_size2);
-- DMA_WR_CMD (regi_dma3, regk_dma_set_w_size2);
-+ DMA_WR_CMD (regi_dma3, regk_dma_set_w_size2);
- }
-
- static dma_descr_context mycontext __attribute__ ((__aligned__(32)));
-
- #define cris_dma_descr_type dma_descr_data
--#define cris_pio_read regk_ata_rd
--#define cris_ultra_mask 0x7
-+#define cris_pio_read (regk_ata_rd << 24)
-+#define cris_ultra_mask 0x0 /* 0x7 for UDMA */
-+#define IRQ ATA_INTR_VECT
- #define MAX_DESCR_SIZE 0xffffffffUL
-
- static unsigned long
-@@ -226,6 +281,8 @@
- d->buf = (char*)virt_to_phys(buf);
- d->after = d->buf + len;
- d->eol = last;
-+ /* assume descriptors are consecutively placed in memory */
-+ d->next = last ? 0 : (cris_dma_descr_type*)virt_to_phys(d+1);
- }
-
- static void
-@@ -237,8 +294,10 @@
- mycontext.saved_data = (dma_descr_data*)virt_to_phys(d);
- mycontext.saved_data_buf = d->buf;
- /* start the dma channel */
-+ if (dir)
-+ flush_dma_context(&mycontext); // Cache bug workaround
- DMA_START_CONTEXT(dir ? regi_dma3 : regi_dma2, virt_to_phys(&mycontext));
--
-+
- /* initiate a multi word dma read using PIO handshaking */
- trf_cnt.cnt = len >> 1;
- /* Due to a "feature" the transfer count has to be one extra word for UDMA. */
-@@ -248,7 +307,7 @@
-
- ctrl2.rw = dir ? regk_ata_rd : regk_ata_wr;
- ctrl2.trf_mode = regk_ata_dma;
-- ctrl2.hsh = type == TYPE_PIO ? regk_ata_pio :
-+ ctrl2.hsh = type == TYPE_PIO ? regk_ata_pio :
- type == TYPE_DMA ? regk_ata_dma : regk_ata_udma;
- ctrl2.multi = regk_ata_yes;
- ctrl2.dma_size = regk_ata_word;
-@@ -339,7 +398,7 @@
- #define ATA_PIO0_STROBE 19
- #define ATA_PIO0_HOLD 4
-
--int
-+int
- cris_ide_ack_intr(ide_hwif_t* hwif)
- {
- return 1;
-@@ -348,13 +407,13 @@
- static inline int
- cris_ide_busy(void)
- {
-- return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy) ;
-+ return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy) ;
- }
-
- static inline int
- cris_ide_ready(void)
- {
-- return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy) ;
-+ return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy) ;
- }
-
- static inline int
-@@ -364,12 +423,12 @@
- *data = (unsigned short)status;
- return status & IO_MASK(R_ATA_STATUS_DATA, dav);
- }
--
-+
- static void
- cris_ide_write_command(unsigned long command)
- {
-- *R_ATA_CTRL_DATA = command;
--}
-+ *R_ATA_CTRL_DATA = command;
-+}
-
- static void
- cris_ide_set_speed(int type, int setup, int strobe, int hold)
-@@ -406,8 +465,8 @@
- cris_ide_reg_addr(unsigned long addr, int cs0, int cs1)
- {
- return IO_FIELD(R_ATA_CTRL_DATA, addr, addr) |
-- IO_FIELD(R_ATA_CTRL_DATA, cs0, cs0) |
-- IO_FIELD(R_ATA_CTRL_DATA, cs1, cs1);
-+ IO_FIELD(R_ATA_CTRL_DATA, cs0, cs0 ? 0 : 1) |
-+ IO_FIELD(R_ATA_CTRL_DATA, cs1, cs1 ? 0 : 1);
- }
-
- static __init void
-@@ -484,6 +543,7 @@
- #define cris_dma_descr_type etrax_dma_descr
- #define cris_pio_read IO_STATE(R_ATA_CTRL_DATA, rw, read)
- #define cris_ultra_mask 0x0
-+#define IRQ 4
- #define MAX_DESCR_SIZE 0x10000UL
-
- static unsigned long
-@@ -497,8 +557,8 @@
- {
- d->buf = virt_to_phys(buf);
- d->sw_len = len == MAX_DESCR_SIZE ? 0 : len;
-- if (last)
-- d->ctrl |= d_eol;
-+ d->ctrl = last ? d_eol : 0;
-+ d->next = last ? 0 : virt_to_phys(d+1); /* assumes descr's in array */
- }
-
- static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir, int type, int len)
-@@ -521,14 +581,14 @@
- *R_DMA_CH2_FIRST = virt_to_phys(d);
- *R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, start);
- }
--
-+
- /* initiate a multi word dma read using DMA handshaking */
-
- *R_ATA_TRANSFER_CNT =
- IO_FIELD(R_ATA_TRANSFER_CNT, count, len >> 1);
-
- cmd = dir ? IO_STATE(R_ATA_CTRL_DATA, rw, read) : IO_STATE(R_ATA_CTRL_DATA, rw, write);
-- cmd |= type == TYPE_PIO ? IO_STATE(R_ATA_CTRL_DATA, handsh, pio) :
-+ cmd |= type == TYPE_PIO ? IO_STATE(R_ATA_CTRL_DATA, handsh, pio) :
- IO_STATE(R_ATA_CTRL_DATA, handsh, dma);
- *R_ATA_CTRL_DATA =
- cmd |
-@@ -570,7 +630,7 @@
- }
-
- #endif
--
-+
- void
- cris_ide_outw(unsigned short data, unsigned long reg) {
- int timeleft;
-@@ -597,7 +657,7 @@
- if(!timeleft)
- printk("ATA timeout reg 0x%lx := 0x%x\n", reg, data);
-
-- cris_ide_write_command(reg|data); /* write data to the drive's register */
-+ cris_ide_write_command(reg|data); /* write data to the drive's register */
-
- timeleft = IDE_REGISTER_TIMEOUT;
- /* wait for transmitter ready */
-@@ -684,13 +744,15 @@
- static void cris_atapi_output_bytes(ide_drive_t *drive, void *, unsigned int);
- static int cris_dma_off (ide_drive_t *drive);
- static int cris_dma_on (ide_drive_t *drive);
-+static int cris_dma_host_off (ide_drive_t *drive);
-+static int cris_dma_host_on (ide_drive_t *drive);
-
- static void tune_cris_ide(ide_drive_t *drive, u8 pio)
- {
- int setup, strobe, hold;
-
- switch(pio)
-- {
-+ {
- case 0:
- setup = ATA_PIO0_SETUP;
- strobe = ATA_PIO0_STROBE;
-@@ -715,7 +777,7 @@
- setup = ATA_PIO4_SETUP;
- strobe = ATA_PIO4_STROBE;
- hold = ATA_PIO4_HOLD;
-- break;
-+ break;
- default:
- return;
- }
-@@ -733,7 +795,7 @@
- }
-
- switch(speed)
-- {
-+ {
- case XFER_UDMA_0:
- cyc = ATA_UDMA0_CYC;
- dvs = ATA_UDMA0_DVS;
-@@ -765,7 +827,7 @@
- if (speed >= XFER_UDMA_0)
- cris_ide_set_speed(TYPE_UDMA, cyc, dvs, 0);
- else
-- cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
-+ cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
-
- return 0;
- }
-@@ -790,11 +852,13 @@
-
- for(h = 0; h < MAX_HWIFS; h++) {
- ide_hwif_t *hwif = &ide_hwifs[h];
-- ide_setup_ports(&hw, cris_ide_base_address(h),
-+ memset(&hw, 0, sizeof(hw));
-+ ide_setup_ports(&hw, cris_ide_base_address(h),
- ide_offsets,
- 0, 0, cris_ide_ack_intr,
-- ide_default_irq(0));
-+ IRQ);
- ide_register_hw(&hw, &hwif);
-+ hwif->irq = IRQ;
- hwif->mmio = 2;
- hwif->chipset = ide_etrax100;
- hwif->tuneproc = &tune_cris_ide;
-@@ -814,13 +878,15 @@
- hwif->OUTBSYNC = &cris_ide_outbsync;
- hwif->INB = &cris_ide_inb;
- hwif->INW = &cris_ide_inw;
-- hwif->ide_dma_host_off = &cris_dma_off;
-- hwif->ide_dma_host_on = &cris_dma_on;
-+ hwif->ide_dma_host_off = &cris_dma_host_off;
-+ hwif->ide_dma_host_on = &cris_dma_host_on;
- hwif->ide_dma_off_quietly = &cris_dma_off;
-+ hwif->ide_dma_on = &cris_dma_on;
- hwif->udma_four = 0;
- hwif->ultra_mask = cris_ultra_mask;
- hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
- hwif->swdma_mask = 0x07; /* Singleword DMA 0-2 */
-+ hwif->rqsize = 256;
- }
-
- /* Reset pulse */
-@@ -835,13 +901,25 @@
- cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0);
- }
-
-+static int cris_dma_host_off (ide_drive_t *drive)
-+{
-+ return 0;
-+}
-+
-+static int cris_dma_host_on (ide_drive_t *drive)
-+{
-+ return 0;
-+}
-+
- static int cris_dma_off (ide_drive_t *drive)
- {
-+ drive->using_dma = 0;
- return 0;
- }
-
- static int cris_dma_on (ide_drive_t *drive)
- {
-+ drive->using_dma = 1;
- return 0;
- }
-
-@@ -958,30 +1036,28 @@
- size += sg_dma_len(sg);
- }
-
-- /* did we run out of descriptors? */
--
-- if(count >= MAX_DMA_DESCRS) {
-- printk("%s: too few DMA descriptors\n", drive->name);
-- return 1;
-- }
--
-- /* however, this case is more difficult - rw_trf_cnt cannot be more
-- than 65536 words per transfer, so in that case we need to either
-+ /* rw_trf_cnt cannot be more than 131072 words per transfer,
-+ (- 1 word for UDMA CRC) so in that case we need to either:
- 1) use a DMA interrupt to re-trigger rw_trf_cnt and continue with
- the descriptors, or
- 2) simply do the request here, and get dma_intr to only ide_end_request on
- those blocks that were actually set-up for transfer.
-+ (The ide framework will issue a new request for the remainder)
- */
-
-- if(ata_tot_size + size > 131072) {
-+ if(ata_tot_size + size > 262140) {
- printk("too large total ATA DMA request, %d + %d!\n", ata_tot_size, (int)size);
- return 1;
- }
-
-- /* If size > MAX_DESCR_SIZE it has to be splitted into new descriptors. Since we
-- don't handle size > 131072 only one split is necessary */
-+ /* If size > MAX_DESCR_SIZE it has to be splitted into new descriptors. */
-
-- if(size > MAX_DESCR_SIZE) {
-+ while (size > MAX_DESCR_SIZE) {
-+ /* did we run out of descriptors? */
-+ if(count >= MAX_DMA_DESCRS) {
-+ printk("%s: too few DMA descriptors\n", drive->name);
-+ return 1;
-+ }
- cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, MAX_DESCR_SIZE, 0);
- count++;
- ata_tot_size += MAX_DESCR_SIZE;
-@@ -989,6 +1065,11 @@
- addr += MAX_DESCR_SIZE;
- }
-
-+ /* did we run out of descriptors? */
-+ if(count >= MAX_DMA_DESCRS) {
-+ printk("%s: too few DMA descriptors\n", drive->name);
-+ return 1;
-+ }
- cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, size,i ? 0 : 1);
- count++;
- ata_tot_size += size;
-@@ -1050,8 +1131,12 @@
-
- if (id && (id->capability & 1)) {
- if (ide_use_dma(drive)) {
-- if (cris_config_drive_for_dma(drive))
-- return hwif->ide_dma_on(drive);
-+ if (cris_config_drive_for_dma(drive)) {
-+ if (hwif->ide_dma_on)
-+ return hwif->ide_dma_on(drive);
-+ else
-+ return 1;
-+ }
- }
- }
-
---- linux-2.6.19.2.orig/drivers/serial/crisv10.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/serial/crisv10.c 2007-01-09 10:30:54.000000000 +0100
-@@ -2,7 +2,7 @@
- *
- * Serial port driver for the ETRAX 100LX chip
- *
-- * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Axis Communications AB
-+ * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB
- *
- * Many, many authors. Based once upon a time on serial.c for 16x50.
- *
-@@ -445,6 +445,7 @@
-
- #include <asm/io.h>
- #include <asm/irq.h>
-+#include <asm/dma.h>
- #include <asm/system.h>
- #include <asm/bitops.h>
- #include <linux/delay.h>
-@@ -454,8 +455,9 @@
- /* non-arch dependent serial structures are in linux/serial.h */
- #include <linux/serial.h>
- /* while we keep our own stuff (struct e100_serial) in a local .h file */
--#include "serial.h"
-+#include "crisv10.h"
- #include <asm/fasttimer.h>
-+#include <asm/arch/io_interface_mux.h>
-
- #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
- #ifndef CONFIG_ETRAX_FAST_TIMER
-@@ -586,11 +588,10 @@
- static void change_speed(struct e100_serial *info);
- static void rs_throttle(struct tty_struct * tty);
- static void rs_wait_until_sent(struct tty_struct *tty, int timeout);
--static int rs_write(struct tty_struct * tty, int from_user,
-+static int rs_write(struct tty_struct * tty,
- const unsigned char *buf, int count);
- #ifdef CONFIG_ETRAX_RS485
--static int e100_write_rs485(struct tty_struct * tty, int from_user,
-- const unsigned char *buf, int count);
-+static int e100_write_rs485(struct tty_struct * tty, const unsigned char *buf, int count);
- #endif
- static int get_lsr_info(struct e100_serial * info, unsigned int *value);
-
-@@ -677,20 +678,39 @@
- .rx_ctrl = DEF_RX,
- .tx_ctrl = DEF_TX,
- .iseteop = 2,
-+ .dma_owner = dma_ser0,
-+ .io_if = if_serial_0,
- #ifdef CONFIG_ETRAX_SERIAL_PORT0
- .enabled = 1,
- #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
- .dma_out_enabled = 1,
-+ .dma_out_nbr = SER0_TX_DMA_NBR,
-+ .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR,
-+ .dma_out_irq_flags = IRQF_DISABLED,
-+ .dma_out_irq_description = "serial 0 dma tr",
- #else
- .dma_out_enabled = 0,
-+ .dma_out_nbr = UINT_MAX,
-+ .dma_out_irq_nbr = 0,
-+ .dma_out_irq_flags = 0,
-+ .dma_out_irq_description = NULL,
- #endif
- #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
- .dma_in_enabled = 1,
-+ .dma_in_nbr = SER0_RX_DMA_NBR,
-+ .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR,
-+ .dma_in_irq_flags = IRQF_DISABLED,
-+ .dma_in_irq_description = "serial 0 dma rec",
- #else
-- .dma_in_enabled = 0
-+ .dma_in_enabled = 0,
-+ .dma_in_nbr = UINT_MAX,
-+ .dma_in_irq_nbr = 0,
-+ .dma_in_irq_flags = 0,
-+ .dma_in_irq_description = NULL,
- #endif
- #else
- .enabled = 0,
-+ .io_if_description = NULL,
- .dma_out_enabled = 0,
- .dma_in_enabled = 0
- #endif
-@@ -712,20 +732,42 @@
- .rx_ctrl = DEF_RX,
- .tx_ctrl = DEF_TX,
- .iseteop = 3,
-+ .dma_owner = dma_ser1,
-+ .io_if = if_serial_1,
- #ifdef CONFIG_ETRAX_SERIAL_PORT1
- .enabled = 1,
-+ .io_if_description = "ser1",
- #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
- .dma_out_enabled = 1,
-+ .dma_out_nbr = SER1_TX_DMA_NBR,
-+ .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR,
-+ .dma_out_irq_flags = IRQF_DISABLED,
-+ .dma_out_irq_description = "serial 1 dma tr",
- #else
- .dma_out_enabled = 0,
-+ .dma_out_nbr = UINT_MAX,
-+ .dma_out_irq_nbr = 0,
-+ .dma_out_irq_flags = 0,
-+ .dma_out_irq_description = NULL,
- #endif
- #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
- .dma_in_enabled = 1,
-+ .dma_in_nbr = SER1_RX_DMA_NBR,
-+ .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR,
-+ .dma_in_irq_flags = IRQF_DISABLED,
-+ .dma_in_irq_description = "serial 1 dma rec",
- #else
-- .dma_in_enabled = 0
-+ .dma_in_enabled = 0,
-+ .dma_in_enabled = 0,
-+ .dma_in_nbr = UINT_MAX,
-+ .dma_in_irq_nbr = 0,
-+ .dma_in_irq_flags = 0,
-+ .dma_in_irq_description = NULL,
- #endif
- #else
- .enabled = 0,
-+ .io_if_description = NULL,
-+ .dma_in_irq_nbr = 0,
- .dma_out_enabled = 0,
- .dma_in_enabled = 0
- #endif
-@@ -746,20 +788,40 @@
- .rx_ctrl = DEF_RX,
- .tx_ctrl = DEF_TX,
- .iseteop = 0,
-+ .dma_owner = dma_ser2,
-+ .io_if = if_serial_2,
- #ifdef CONFIG_ETRAX_SERIAL_PORT2
- .enabled = 1,
-+ .io_if_description = "ser2",
- #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
- .dma_out_enabled = 1,
-+ .dma_out_nbr = SER2_TX_DMA_NBR,
-+ .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR,
-+ .dma_out_irq_flags = IRQF_DISABLED,
-+ .dma_out_irq_description = "serial 2 dma tr",
- #else
- .dma_out_enabled = 0,
-+ .dma_in_nbr = UINT_MAX,
-+ .dma_in_irq_nbr = 0,
-+ .dma_in_irq_flags = 0,
-+ .dma_in_irq_description = NULL,
- #endif
- #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
- .dma_in_enabled = 1,
-+ .dma_in_nbr = SER2_RX_DMA_NBR,
-+ .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR,
-+ .dma_in_irq_flags = IRQF_DISABLED,
-+ .dma_in_irq_description = "serial 2 dma rec",
- #else
-- .dma_in_enabled = 0
-+ .dma_in_enabled = 0,
-+ .dma_in_nbr = UINT_MAX,
-+ .dma_in_irq_nbr = 0,
-+ .dma_in_irq_flags = 0,
-+ .dma_in_irq_description = NULL,
- #endif
- #else
- .enabled = 0,
-+ .io_if_description = NULL,
- .dma_out_enabled = 0,
- .dma_in_enabled = 0
- #endif
-@@ -780,20 +842,40 @@
- .rx_ctrl = DEF_RX,
- .tx_ctrl = DEF_TX,
- .iseteop = 1,
-+ .dma_owner = dma_ser3,
-+ .io_if = if_serial_3,
- #ifdef CONFIG_ETRAX_SERIAL_PORT3
- .enabled = 1,
-+ .io_if_description = "ser3",
- #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
- .dma_out_enabled = 1,
-+ .dma_out_nbr = SER3_TX_DMA_NBR,
-+ .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR,
-+ .dma_out_irq_flags = IRQF_DISABLED,
-+ .dma_out_irq_description = "serial 3 dma tr",
- #else
- .dma_out_enabled = 0,
-+ .dma_out_nbr = UINT_MAX,
-+ .dma_out_irq_nbr = 0,
-+ .dma_out_irq_flags = 0,
-+ .dma_out_irq_description = NULL,
- #endif
- #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
- .dma_in_enabled = 1,
-+ .dma_in_nbr = SER3_RX_DMA_NBR,
-+ .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR,
-+ .dma_in_irq_flags = IRQF_DISABLED,
-+ .dma_in_irq_description = "serial 3 dma rec",
- #else
-- .dma_in_enabled = 0
-+ .dma_in_enabled = 0,
-+ .dma_in_nbr = UINT_MAX,
-+ .dma_in_irq_nbr = 0,
-+ .dma_in_irq_flags = 0,
-+ .dma_in_irq_description = NULL
- #endif
- #else
- .enabled = 0,
-+ .io_if_description = NULL,
- .dma_out_enabled = 0,
- .dma_in_enabled = 0
- #endif
-@@ -1414,12 +1496,11 @@
- {
- unsigned long flags;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- *e100_modem_pins[info->line].dtr_shadow &= ~mask;
- *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask);
- *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
-
- #ifdef SERIAL_DEBUG_IO
-@@ -1438,12 +1519,11 @@
- {
- #ifndef CONFIG_SVINTO_SIM
- unsigned long flags;
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- info->rx_ctrl &= ~E100_RTS_MASK;
- info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */
- info->port[REG_REC_CTRL] = info->rx_ctrl;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- #ifdef SERIAL_DEBUG_IO
- printk("ser%i rts %i\n", info->line, set);
- #endif
-@@ -1461,12 +1541,11 @@
- unsigned char mask = e100_modem_pins[info->line].ri_mask;
- unsigned long flags;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- *e100_modem_pins[info->line].ri_shadow &= ~mask;
- *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask);
- *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
- #endif
- }
-@@ -1479,12 +1558,11 @@
- unsigned char mask = e100_modem_pins[info->line].cd_mask;
- unsigned long flags;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- *e100_modem_pins[info->line].cd_shadow &= ~mask;
- *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask);
- *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
- #endif
- }
-@@ -1558,8 +1636,7 @@
- /* Disable output DMA channel for the serial port in question
- * ( set to something other then serialX)
- */
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
- if (info->line == 0) {
- if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) ==
-@@ -1587,7 +1664,7 @@
- }
- }
- *R_GEN_CONFIG = genconfig_shadow;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
-
-
-@@ -1595,8 +1672,7 @@
- {
- unsigned long flags;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line));
- /* Enable output DMA channel for the serial port in question */
- if (info->line == 0) {
-@@ -1613,7 +1689,7 @@
- genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3);
- }
- *R_GEN_CONFIG = genconfig_shadow;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
-
- static void e100_disable_rxdma_channel(struct e100_serial *info)
-@@ -1623,8 +1699,7 @@
- /* Disable input DMA channel for the serial port in question
- * ( set to something other then serialX)
- */
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- if (info->line == 0) {
- if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) ==
- IO_STATE(R_GEN_CONFIG, dma7, serial0)) {
-@@ -1651,7 +1726,7 @@
- }
- }
- *R_GEN_CONFIG = genconfig_shadow;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
-
-
-@@ -1659,8 +1734,7 @@
- {
- unsigned long flags;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- /* Enable input DMA channel for the serial port in question */
- if (info->line == 0) {
- genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7);
-@@ -1676,7 +1750,7 @@
- genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3);
- }
- *R_GEN_CONFIG = genconfig_shadow;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
-
- #ifdef SERIAL_HANDLE_EARLY_ERRORS
-@@ -1783,7 +1857,7 @@
- }
-
- static int
--e100_write_rs485(struct tty_struct *tty, int from_user,
-+e100_write_rs485(struct tty_struct *tty,
- const unsigned char *buf, int count)
- {
- struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-@@ -1796,7 +1870,7 @@
- */
- info->rs485.enabled = 1;
- /* rs_write now deals with RS485 if enabled */
-- count = rs_write(tty, from_user, buf, count);
-+ count = rs_write(tty, buf, count);
- info->rs485.enabled = old_enabled;
- return count;
- }
-@@ -1834,7 +1908,7 @@
- unsigned long flags;
- unsigned long xoff;
-
-- save_flags(flags); cli();
-+ local_irq_save(flags);
- DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n",
- CIRC_CNT(info->xmit.head,
- info->xmit.tail,SERIAL_XMIT_SIZE)));
-@@ -1846,7 +1920,7 @@
- }
-
- *((unsigned long *)&info->port[REG_XOFF]) = xoff;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
- }
-
-@@ -1858,7 +1932,7 @@
- unsigned long flags;
- unsigned long xoff;
-
-- save_flags(flags); cli();
-+ local_irq_save(flags);
- DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n",
- CIRC_CNT(info->xmit.head,
- info->xmit.tail,SERIAL_XMIT_SIZE)));
-@@ -1873,7 +1947,7 @@
- info->xmit.head != info->xmit.tail && info->xmit.buf)
- e100_enable_serial_tx_ready_irq(info);
-
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
- }
-
-@@ -2053,8 +2127,7 @@
- static void flush_timeout_function(unsigned long data);
- #define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\
- unsigned long timer_flags; \
-- save_flags(timer_flags); \
-- cli(); \
-+ local_irq_save(timer_flags); \
- if (fast_timers[info->line].function == NULL) { \
- serial_fast_timer_started++; \
- TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \
-@@ -2068,7 +2141,7 @@
- else { \
- TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \
- } \
-- restore_flags(timer_flags); \
-+ local_irq_restore(timer_flags); \
- }
- #define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec)
-
-@@ -2097,8 +2170,7 @@
- {
- unsigned long flags;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
-
- if (!info->first_recv_buffer)
- info->first_recv_buffer = buffer;
-@@ -2111,7 +2183,7 @@
- if (info->recv_cnt > info->max_recv_cnt)
- info->max_recv_cnt = info->recv_cnt;
-
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
-
- static int
-@@ -2131,11 +2203,7 @@
- info->icount.rx++;
- } else {
- struct tty_struct *tty = info->tty;
-- *tty->flip.char_buf_ptr = data;
-- *tty->flip.flag_buf_ptr = flag;
-- tty->flip.flag_buf_ptr++;
-- tty->flip.char_buf_ptr++;
-- tty->flip.count++;
-+ tty_insert_flip_char(tty, data, flag);
- info->icount.rx++;
- }
-
-@@ -2320,7 +2388,6 @@
- */
- return;
- #endif
-- info->tty->flip.count = 0;
- if (info->uses_dma_in) {
- /* reset the input dma channel to be sure it works */
-
-@@ -2482,70 +2549,21 @@
- {
- struct tty_struct *tty;
- struct etrax_recv_buffer *buffer;
-- unsigned int length;
- unsigned long flags;
-- int max_flip_size;
--
-- if (!info->first_recv_buffer)
-- return;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
-+ tty = info->tty;
-
-- if (!(tty = info->tty)) {
-- restore_flags(flags);
-+ if (!tty) {
-+ local_irq_restore(flags);
- return;
- }
-
-- length = tty->flip.count;
-- /* Don't flip more than the ldisc has room for.
-- * The return value from ldisc.receive_room(tty) - might not be up to
-- * date, the previous flip of up to TTY_FLIPBUF_SIZE might be on the
-- * processed and not accounted for yet.
-- * Since we use DMA, 1 SERIAL_DESCR_BUF_SIZE could be on the way.
-- * Lets buffer data here and let flow control take care of it.
-- * Since we normally flip large chunks, the ldisc don't react
-- * with throttle until too late if we flip to much.
-- */
-- max_flip_size = tty->ldisc.receive_room(tty);
-- if (max_flip_size < 0)
-- max_flip_size = 0;
-- if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */
-- length + info->recv_cnt + /* We have this queued */
-- 2*SERIAL_DESCR_BUF_SIZE + /* This could be on the way */
-- TTY_THRESHOLD_THROTTLE)) { /* Some slack */
-- /* check TTY_THROTTLED first so it indicates our state */
-- if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
-- DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles room %lu\n", max_flip_size));
-- rs_throttle(tty);
-- }
--#if 0
-- else if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */
-- length + info->recv_cnt + /* We have this queued */
-- SERIAL_DESCR_BUF_SIZE + /* This could be on the way */
-- TTY_THRESHOLD_THROTTLE)) { /* Some slack */
-- DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles again! %lu\n", max_flip_size));
-- rs_throttle(tty);
-- }
--#endif
-- }
--
-- if (max_flip_size > TTY_FLIPBUF_SIZE)
-- max_flip_size = TTY_FLIPBUF_SIZE;
--
-- while ((buffer = info->first_recv_buffer) && length < max_flip_size) {
-+ while ((buffer = info->first_recv_buffer)) {
- unsigned int count = buffer->length;
-
-- if (length + count > max_flip_size)
-- count = max_flip_size - length;
--
-- memcpy(tty->flip.char_buf_ptr + length, buffer->buffer, count);
-- memset(tty->flip.flag_buf_ptr + length, TTY_NORMAL, count);
-- tty->flip.flag_buf_ptr[length] = buffer->error;
--
-- length += count;
-+ tty_insert_flip_string(tty, buffer->buffer, count);
- info->recv_cnt -= count;
-- DFLIP(DEBUG_LOG(info->line,"flip: %i\n", length));
-
- if (count == buffer->length) {
- info->first_recv_buffer = buffer->next;
-@@ -2560,24 +2578,7 @@
- if (!info->first_recv_buffer)
- info->last_recv_buffer = NULL;
-
-- tty->flip.count = length;
-- DFLIP(if (tty->ldisc.chars_in_buffer(tty) > 3500) {
-- DEBUG_LOG(info->line, "ldisc %lu\n",
-- tty->ldisc.chars_in_buffer(tty));
-- DEBUG_LOG(info->line, "flip.count %lu\n",
-- tty->flip.count);
-- }
-- );
-- restore_flags(flags);
--
-- DFLIP(
-- if (1) {
-- DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx);
-- DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty));
-- DEBUG_LOG(info->line, "room %lu\n", tty->ldisc.receive_room(tty));
-- }
--
-- );
-+ local_irq_restore(flags);
-
- /* this includes a check for low-latency */
- tty_flip_buffer_push(tty);
-@@ -2722,21 +2723,7 @@
- printk("!NO TTY!\n");
- return info;
- }
-- if (tty->flip.count >= TTY_FLIPBUF_SIZE - TTY_THRESHOLD_THROTTLE) {
-- /* check TTY_THROTTLED first so it indicates our state */
-- if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) {
-- DFLOW(DEBUG_LOG(info->line, "rs_throttle flip.count: %i\n", tty->flip.count));
-- rs_throttle(tty);
-- }
-- }
-- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-- DEBUG_LOG(info->line, "force FLIP! %i\n", tty->flip.count);
-- tty->flip.work.func((void *) tty);
-- if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-- DEBUG_LOG(info->line, "FLIP FULL! %i\n", tty->flip.count);
-- return info; /* if TTY_DONT_FLIP is set */
-- }
-- }
-+
- /* Read data and status at the same time */
- data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
- more_data:
-@@ -2789,27 +2776,25 @@
- DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt);
- info->errorcode = ERRCODE_INSERT_BREAK;
- } else {
-+ unsigned char data = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
-+ char flag = TTY_NORMAL;
- if (info->errorcode == ERRCODE_INSERT_BREAK) {
-- info->icount.brk++;
-- *tty->flip.char_buf_ptr = 0;
-- *tty->flip.flag_buf_ptr = TTY_BREAK;
-- tty->flip.flag_buf_ptr++;
-- tty->flip.char_buf_ptr++;
-- tty->flip.count++;
-+ struct tty_struct *tty = info->tty;
-+ tty_insert_flip_char(tty, 0, flag);
- info->icount.rx++;
- }
-- *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
-
- if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) {
- info->icount.parity++;
-- *tty->flip.flag_buf_ptr = TTY_PARITY;
-+ flag = TTY_PARITY;
- } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) {
- info->icount.overrun++;
-- *tty->flip.flag_buf_ptr = TTY_OVERRUN;
-+ flag = TTY_OVERRUN;
- } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) {
- info->icount.frame++;
-- *tty->flip.flag_buf_ptr = TTY_FRAME;
-+ flag = TTY_FRAME;
- }
-+ tty_insert_flip_char(tty, data, flag);
- info->errorcode = 0;
- }
- info->break_detected_cnt = 0;
-@@ -2825,16 +2810,12 @@
- log_int(rdpc(), 0, 0);
- }
- );
-- *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read);
-- *tty->flip.flag_buf_ptr = 0;
-+ tty_insert_flip_char(tty, IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), TTY_NORMAL);
- } else {
- DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read);
- }
-
-
-- tty->flip.flag_buf_ptr++;
-- tty->flip.char_buf_ptr++;
-- tty->flip.count++;
- info->icount.rx++;
- data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]);
- if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) {
-@@ -2972,7 +2953,7 @@
- if (info->x_char) {
- unsigned char rstat;
- DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char));
-- save_flags(flags); cli();
-+ local_irq_save(flags);
- rstat = info->port[REG_STATUS];
- DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
-
-@@ -2981,7 +2962,7 @@
- info->x_char = 0;
- /* We must enable since it is disabled in ser_interrupt */
- e100_enable_serial_tx_ready_irq(info);
-- restore_flags(flags);
-+ local_irq_restore(flags);
- return;
- }
- if (info->uses_dma_out) {
-@@ -2989,7 +2970,7 @@
- int i;
- /* We only use normal tx interrupt when sending x_char */
- DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0));
-- save_flags(flags); cli();
-+ local_irq_save(flags);
- rstat = info->port[REG_STATUS];
- DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat));
- e100_disable_serial_tx_ready_irq(info);
-@@ -3002,7 +2983,7 @@
- nop();
-
- *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue);
-- restore_flags(flags);
-+ local_irq_restore(flags);
- return;
- }
- /* Normal char-by-char interrupt */
-@@ -3016,7 +2997,7 @@
- }
- DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail]));
- /* Send a byte, rs485 timing is critical so turn of ints */
-- save_flags(flags); cli();
-+ local_irq_save(flags);
- info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail];
- info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1);
- info->icount.tx++;
-@@ -3040,7 +3021,7 @@
- /* We must enable since it is disabled in ser_interrupt */
- e100_enable_serial_tx_ready_irq(info);
- }
-- restore_flags(flags);
-+ local_irq_restore(flags);
-
- if (CIRC_CNT(info->xmit.head,
- info->xmit.tail,
-@@ -3065,7 +3046,7 @@
- int handled = 0;
- static volatile unsigned long reentered_ready_mask = 0;
-
-- save_flags(flags); cli();
-+ local_irq_save(flags);
- irq_mask1_rd = *R_IRQ_MASK1_RD;
- /* First handle all rx interrupts with ints disabled */
- info = rs_table;
-@@ -3110,7 +3091,7 @@
- /* Unblock the serial interrupt */
- *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set);
-
-- sti();
-+ local_irq_enable();
- ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */
- info = rs_table;
- for (i = 0; i < NR_PORTS; i++) {
-@@ -3123,11 +3104,11 @@
- ready_mask <<= 2;
- }
- /* handle_ser_tx_interrupt enables tr_ready interrupts */
-- cli();
-+ local_irq_disable();
- /* Handle reentered TX interrupt */
- irq_mask1_rd = reentered_ready_mask;
- }
-- cli();
-+ local_irq_disable();
- tx_started = 0;
- } else {
- unsigned long ready_mask;
-@@ -3143,7 +3124,7 @@
- }
- }
-
-- restore_flags(flags);
-+ local_irq_restore(flags);
- return IRQ_RETVAL(handled);
- } /* ser_interrupt */
- #endif
-@@ -3192,13 +3173,12 @@
- if (!xmit_page)
- return -ENOMEM;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
-
- /* if it was already initialized, skip this */
-
- if (info->flags & ASYNC_INITIALIZED) {
-- restore_flags(flags);
-+ local_irq_restore(flags);
- free_page(xmit_page);
- return 0;
- }
-@@ -3324,7 +3304,7 @@
-
- info->flags |= ASYNC_INITIALIZED;
-
-- restore_flags(flags);
-+ local_irq_restore(flags);
- return 0;
- }
-
-@@ -3375,8 +3355,7 @@
- info->irq);
- #endif
-
-- save_flags(flags);
-- cli(); /* Disable interrupts */
-+ local_irq_save(flags);
-
- if (info->xmit.buf) {
- free_page((unsigned long)info->xmit.buf);
-@@ -3400,7 +3379,7 @@
- set_bit(TTY_IO_ERROR, &info->tty->flags);
-
- info->flags &= ~ASYNC_INITIALIZED;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
-
-
-@@ -3492,8 +3471,7 @@
-
- #ifndef CONFIG_SVINTO_SIM
- /* start with default settings and then fill in changes */
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- /* 8 bit, no/even parity */
- info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) |
- IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) |
-@@ -3557,7 +3535,7 @@
- }
-
- *((unsigned long *)&info->port[REG_XOFF]) = xoff;
-- restore_flags(flags);
-+ local_irq_restore(flags);
- #endif /* !CONFIG_SVINTO_SIM */
-
- update_char_time(info);
-@@ -3585,13 +3563,12 @@
-
- /* this protection might not exactly be necessary here */
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- start_transmit(info);
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
-
--static int rs_raw_write(struct tty_struct * tty, int from_user,
-+static int rs_raw_write(struct tty_struct * tty,
- const unsigned char *buf, int count)
- {
- int c, ret = 0;
-@@ -3614,72 +3591,37 @@
- SIMCOUT(buf, count);
- return count;
- #endif
-- save_flags(flags);
-+ local_save_flags(flags);
- DFLOW(DEBUG_LOG(info->line, "write count %i ", count));
- DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty)));
-
-
-- /* the cli/restore_flags pairs below are needed because the
-+ /* the local_irq_disable/restore_flags pairs below are needed because the
- * DMA interrupt handler moves the info->xmit values. the memcpy
- * needs to be in the critical region unfortunately, because we
- * need to read xmit values, memcpy, write xmit values in one
- * atomic operation... this could perhaps be avoided by more clever
- * design.
- */
-- if (from_user) {
-- mutex_lock(&tmp_buf_mutex);
-- while (1) {
-- int c1;
-- c = CIRC_SPACE_TO_END(info->xmit.head,
-- info->xmit.tail,
-- SERIAL_XMIT_SIZE);
-- if (count < c)
-- c = count;
-- if (c <= 0)
-- break;
--
-- c -= copy_from_user(tmp_buf, buf, c);
-- if (!c) {
-- if (!ret)
-- ret = -EFAULT;
-- break;
-- }
-- cli();
-- c1 = CIRC_SPACE_TO_END(info->xmit.head,
-- info->xmit.tail,
-- SERIAL_XMIT_SIZE);
-- if (c1 < c)
-- c = c1;
-- memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c);
-- info->xmit.head = ((info->xmit.head + c) &
-- (SERIAL_XMIT_SIZE-1));
-- restore_flags(flags);
-- buf += c;
-- count -= c;
-- ret += c;
-- }
-- mutex_unlock(&tmp_buf_mutex);
-- } else {
-- cli();
-- while (count) {
-- c = CIRC_SPACE_TO_END(info->xmit.head,
-- info->xmit.tail,
-- SERIAL_XMIT_SIZE);
--
-- if (count < c)
-- c = count;
-- if (c <= 0)
-- break;
--
-- memcpy(info->xmit.buf + info->xmit.head, buf, c);
-- info->xmit.head = (info->xmit.head + c) &
-- (SERIAL_XMIT_SIZE-1);
-- buf += c;
-- count -= c;
-- ret += c;
-- }
-- restore_flags(flags);
-+ local_irq_disable();
-+ while (count) {
-+ c = CIRC_SPACE_TO_END(info->xmit.head,
-+ info->xmit.tail,
-+ SERIAL_XMIT_SIZE);
-+
-+ if (count < c)
-+ c = count;
-+ if (c <= 0)
-+ break;
-+
-+ memcpy(info->xmit.buf + info->xmit.head, buf, c);
-+ info->xmit.head = (info->xmit.head + c) &
-+ (SERIAL_XMIT_SIZE-1);
-+ buf += c;
-+ count -= c;
-+ ret += c;
- }
-+ local_irq_restore(flags);
-
- /* enable transmitter if not running, unless the tty is stopped
- * this does not need IRQ protection since if tr_running == 0
-@@ -3698,7 +3640,7 @@
- } /* raw_raw_write() */
-
- static int
--rs_write(struct tty_struct * tty, int from_user,
-+rs_write(struct tty_struct * tty,
- const unsigned char *buf, int count)
- {
- #if defined(CONFIG_ETRAX_RS485)
-@@ -3725,7 +3667,7 @@
- }
- #endif /* CONFIG_ETRAX_RS485 */
-
-- count = rs_raw_write(tty, from_user, buf, count);
-+ count = rs_raw_write(tty, buf, count);
-
- #if defined(CONFIG_ETRAX_RS485)
- if (info->rs485.enabled)
-@@ -3793,10 +3735,9 @@
- struct e100_serial *info = (struct e100_serial *)tty->driver_data;
- unsigned long flags;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- info->xmit.head = info->xmit.tail = 0;
-- restore_flags(flags);
-+ local_irq_restore(flags);
-
- wake_up_interruptible(&tty->write_wait);
-
-@@ -3818,7 +3759,7 @@
- {
- struct e100_serial *info = (struct e100_serial *)tty->driver_data;
- unsigned long flags;
-- save_flags(flags); cli();
-+ local_irq_save(flags);
- if (info->uses_dma_out) {
- /* Put the DMA on hold and disable the channel */
- *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold);
-@@ -3835,7 +3776,7 @@
- DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch));
- info->x_char = ch;
- e100_enable_serial_tx_ready_irq(info);
-- restore_flags(flags);
-+ local_irq_restore(flags);
- }
-
- /*
-@@ -4085,61 +4026,6 @@
- return 0;
- }
-
--
--static int
--set_modem_info(struct e100_serial * info, unsigned int cmd,
-- unsigned int *value)
--{
-- unsigned int arg;
--
-- if (copy_from_user(&arg, value, sizeof(int)))
-- return -EFAULT;
--
-- switch (cmd) {
-- case TIOCMBIS:
-- if (arg & TIOCM_RTS) {
-- e100_rts(info, 1);
-- }
-- if (arg & TIOCM_DTR) {
-- e100_dtr(info, 1);
-- }
-- /* Handle FEMALE behaviour */
-- if (arg & TIOCM_RI) {
-- e100_ri_out(info, 1);
-- }
-- if (arg & TIOCM_CD) {
-- e100_cd_out(info, 1);
-- }
-- break;
-- case TIOCMBIC:
-- if (arg & TIOCM_RTS) {
-- e100_rts(info, 0);
-- }
-- if (arg & TIOCM_DTR) {
-- e100_dtr(info, 0);
-- }
-- /* Handle FEMALE behaviour */
-- if (arg & TIOCM_RI) {
-- e100_ri_out(info, 0);
-- }
-- if (arg & TIOCM_CD) {
-- e100_cd_out(info, 0);
-- }
-- break;
-- case TIOCMSET:
-- e100_rts(info, arg & TIOCM_RTS);
-- e100_dtr(info, arg & TIOCM_DTR);
-- /* Handle FEMALE behaviour */
-- e100_ri_out(info, arg & TIOCM_RI);
-- e100_cd_out(info, arg & TIOCM_CD);
-- break;
-- default:
-- return -EINVAL;
-- }
-- return 0;
--}
--
--
- static void
- rs_break(struct tty_struct *tty, int break_state)
- {
-@@ -4149,8 +4035,7 @@
- if (!info->port)
- return;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- if (break_state == -1) {
- /* Go to manual mode and set the txd pin to 0 */
- info->tx_ctrl &= 0x3F; /* Clear bit 7 (txd) and 6 (tr_enable) */
-@@ -4158,7 +4043,42 @@
- info->tx_ctrl |= (0x80 | 0x40); /* Set bit 7 (txd) and 6 (tr_enable) */
- }
- info->port[REG_TR_CTRL] = info->tx_ctrl;
-- restore_flags(flags);
-+ local_irq_restore(flags);
-+}
-+
-+static int
-+rs_tiocmset(struct tty_struct *tty, struct file * file, unsigned int set, unsigned int clear)
-+{
-+ struct e100_serial * info = (struct e100_serial *)tty->driver_data;
-+
-+ if (clear & TIOCM_RTS) {
-+ e100_rts(info, 0);
-+ }
-+ if (clear & TIOCM_DTR) {
-+ e100_dtr(info, 0);
-+ }
-+ /* Handle FEMALE behaviour */
-+ if (clear & TIOCM_RI) {
-+ e100_ri_out(info, 0);
-+ }
-+ if (clear & TIOCM_CD) {
-+ e100_cd_out(info, 0);
-+ }
-+
-+ if (set & TIOCM_RTS) {
-+ e100_rts(info, 1);
-+ }
-+ if (set & TIOCM_DTR) {
-+ e100_dtr(info, 1);
-+ }
-+ /* Handle FEMALE behaviour */
-+ if (set & TIOCM_RI) {
-+ e100_ri_out(info, 1);
-+ }
-+ if (set & TIOCM_CD) {
-+ e100_cd_out(info, 1);
-+ }
-+ return 0;
- }
-
- static int
-@@ -4177,10 +4097,6 @@
- switch (cmd) {
- case TIOCMGET:
- return get_modem_info(info, (unsigned int *) arg);
-- case TIOCMBIS:
-- case TIOCMBIC:
-- case TIOCMSET:
-- return set_modem_info(info, cmd, (unsigned int *) arg);
- case TIOCGSERIAL:
- return get_serial_info(info,
- (struct serial_struct *) arg);
-@@ -4212,7 +4128,7 @@
- if (copy_from_user(&rs485wr, (struct rs485_write*)arg, sizeof(rs485wr)))
- return -EFAULT;
-
-- return e100_write_rs485(tty, 1, rs485wr.outc, rs485wr.outc_size);
-+ return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size);
- }
- #endif
-
-@@ -4242,46 +4158,6 @@
-
- }
-
--/* In debugport.c - register a console write function that uses the normal
-- * serial driver
-- */
--typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len);
--
--extern debugport_write_function debug_write_function;
--
--static int rs_debug_write_function(int i, const char *buf, unsigned int len)
--{
-- int cnt;
-- int written = 0;
-- struct tty_struct *tty;
-- static int recurse_cnt = 0;
--
-- tty = rs_table[i].tty;
-- if (tty) {
-- unsigned long flags;
-- if (recurse_cnt > 5) /* We skip this debug output */
-- return 1;
--
-- local_irq_save(flags);
-- recurse_cnt++;
-- local_irq_restore(flags);
-- do {
-- cnt = rs_write(tty, 0, buf + written, len);
-- if (cnt >= 0) {
-- written += cnt;
-- buf += cnt;
-- len -= cnt;
-- } else
-- len = cnt;
-- } while(len > 0);
-- local_irq_save(flags);
-- recurse_cnt--;
-- local_irq_restore(flags);
-- return 1;
-- }
-- return 0;
--}
--
- /*
- * ------------------------------------------------------------
- * rs_close()
-@@ -4303,11 +4179,10 @@
-
- /* interrupts are disabled for this entire function */
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
-
- if (tty_hung_up_p(filp)) {
-- restore_flags(flags);
-+ local_irq_restore(flags);
- return;
- }
-
-@@ -4334,7 +4209,7 @@
- info->count = 0;
- }
- if (info->count) {
-- restore_flags(flags);
-+ local_irq_restore(flags);
- return;
- }
- info->flags |= ASYNC_CLOSING;
-@@ -4388,7 +4263,7 @@
- }
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&info->close_wait);
-- restore_flags(flags);
-+ local_irq_restore(flags);
-
- /* port closed */
-
-@@ -4410,6 +4285,28 @@
- #endif
- }
- #endif
-+
-+ /*
-+ * Release any allocated DMA irq's.
-+ */
-+ if (info->dma_in_enabled) {
-+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
-+ free_irq(info->dma_in_irq_nbr,
-+ info);
-+ info->uses_dma_in = 0;
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("DMA irq '%s' freed\n", info->dma_in_irq_description);
-+#endif
-+ }
-+ if (info->dma_out_enabled) {
-+ free_irq(info->dma_out_irq_nbr,
-+ info);
-+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
-+ info->uses_dma_out = 0;
-+#ifdef SERIAL_DEBUG_OPEN
-+ printk("DMA irq '%s' freed\n", info->dma_out_irq_description);
-+#endif
-+ }
- }
-
- /*
-@@ -4485,7 +4382,7 @@
- if (tty_hung_up_p(filp) ||
- (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
-- interruptible_sleep_on(&info->close_wait);
-+ wait_event_interruptible(info->close_wait, 0);
- #ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
-@@ -4523,21 +4420,19 @@
- printk("block_til_ready before block: ttyS%d, count = %d\n",
- info->line, info->count);
- #endif
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- if (!tty_hung_up_p(filp)) {
- extra_count++;
- info->count--;
- }
-- restore_flags(flags);
-+ local_irq_restore(flags);
- info->blocked_open++;
- while (1) {
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
- /* assert RTS and DTR */
- e100_rts(info, 1);
- e100_dtr(info, 1);
-- restore_flags(flags);
-+ local_irq_restore(flags);
- set_current_state(TASK_INTERRUPTIBLE);
- if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
-@@ -4589,9 +4484,9 @@
- struct e100_serial *info;
- int retval, line;
- unsigned long page;
-+ int allocated_resources = 0;
-
- /* find which port we want to open */
--
- line = tty->index;
-
- if (line < 0 || line >= NR_PORTS)
-@@ -4632,7 +4527,7 @@
- if (tty_hung_up_p(filp) ||
- (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
-- interruptible_sleep_on(&info->close_wait);
-+ wait_event_interruptible(info->close_wait, 0);
- #ifdef SERIAL_DO_RESTART
- return ((info->flags & ASYNC_HUP_NOTIFY) ?
- -EAGAIN : -ERESTARTSYS);
-@@ -4642,12 +4537,79 @@
- }
-
- /*
-+ * If DMA is enabled try to allocate the irq's.
-+ */
-+ if (info->count == 1) {
-+ allocated_resources = 1;
-+ if (info->dma_in_enabled) {
-+ if (request_irq(info->dma_in_irq_nbr,
-+ rec_interrupt,
-+ info->dma_in_irq_flags,
-+ info->dma_in_irq_description,
-+ info)) {
-+ printk(KERN_WARNING "DMA irq '%s' busy; falling back to non-DMA mode\n", info->dma_in_irq_description);
-+ /* Make sure we never try to use DMA in for the port again. */
-+ info->dma_in_enabled = 0;
-+ } else if (cris_request_dma(info->dma_in_nbr,
-+ info->dma_in_irq_description,
-+ DMA_VERBOSE_ON_ERROR,
-+ info->dma_owner)) {
-+ free_irq(info->dma_in_irq_nbr, info);
-+ printk(KERN_WARNING "DMA '%s' busy; falling back to non-DMA mode\n", info->dma_in_irq_description);
-+ /* Make sure we never try to use DMA in for the port again. */
-+ info->dma_in_enabled = 0;
-+ }
-+#ifdef SERIAL_DEBUG_OPEN
-+ else printk("DMA irq '%s' allocated\n", info->dma_in_irq_description);
-+#endif
-+ }
-+ if (info->dma_out_enabled) {
-+ if (request_irq(info->dma_out_irq_nbr,
-+ tr_interrupt,
-+ info->dma_out_irq_flags,
-+ info->dma_out_irq_description,
-+ info)) {
-+ printk(KERN_WARNING "DMA irq '%s' busy; falling back to non-DMA mode\n", info->dma_out_irq_description);
-+ /* Make sure we never try to use DMA out for the port again. */
-+ info->dma_out_enabled = 0;
-+ } else if (cris_request_dma(info->dma_out_nbr,
-+ info->dma_out_irq_description,
-+ DMA_VERBOSE_ON_ERROR,
-+ info->dma_owner)) {
-+ free_irq(info->dma_out_irq_nbr, info);
-+ printk(KERN_WARNING "DMA '%s' busy; falling back to non-DMA mode\n", info->dma_out_irq_description);
-+ /* Make sure we never try to use DMA in for the port again. */
-+ info->dma_out_enabled = 0;
-+ }
-+#ifdef SERIAL_DEBUG_OPEN
-+ else printk("DMA irq '%s' allocated\n", info->dma_out_irq_description);
-+#endif
-+ }
-+ }
-+
-+ /*
- * Start up the serial port
- */
-
- retval = startup(info);
-- if (retval)
-- return retval;
-+ if (retval) {
-+ if (allocated_resources) {
-+ if (info->dma_out_enabled) {
-+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
-+ free_irq(info->dma_out_irq_nbr,
-+ info);
-+ }
-+ if (info->dma_in_enabled) {
-+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
-+ free_irq(info->dma_in_irq_nbr,
-+ info);
-+ }
-+ }
-+ /* FIXME Decrease count info->count here too? */
-+ return retval;
-+
-+ }
-+
-
- retval = block_til_ready(tty, filp, info);
- if (retval) {
-@@ -4655,6 +4617,19 @@
- printk("rs_open returning after block_til_ready with %d\n",
- retval);
- #endif
-+ if (allocated_resources) {
-+ if (info->dma_out_enabled) {
-+ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description);
-+ free_irq(info->dma_out_irq_nbr,
-+ info);
-+ }
-+ if (info->dma_in_enabled) {
-+ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description);
-+ free_irq(info->dma_in_irq_nbr,
-+ info);
-+ }
-+ }
-+
- return retval;
- }
-
-@@ -4844,6 +4819,7 @@
- .send_xchar = rs_send_xchar,
- .wait_until_sent = rs_wait_until_sent,
- .read_proc = rs_read_proc,
-+ .tiocmset = rs_tiocmset
- };
-
- static int __init
-@@ -4863,7 +4839,22 @@
- #if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER)
- init_timer(&flush_timer);
- flush_timer.function = timed_flush_handler;
-- mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS);
-+ mod_timer(&flush_timer, jiffies + 5);
-+#endif
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+#if defined(CONFIG_ETRAX_RS485_ON_PA)
-+ if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, rs485_pa_bit)) {
-+ printk(KERN_CRIT "ETRAX100LX serial: Could not allocate RS485 pin\n");
-+ return -EBUSY;
-+ }
-+#endif
-+#if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-+ if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, rs485_port_g_bit)) {
-+ printk(KERN_CRIT "ETRAX100LX serial: Could not allocate RS485 pin\n");
-+ return -EBUSY;
-+ }
-+#endif
- #endif
-
- /* Initialize the tty_driver structure */
-@@ -4888,6 +4879,14 @@
- /* do some initializing for the separate ports */
-
- for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) {
-+ if (info->enabled) {
-+ if (cris_request_io_interface(info->io_if, info->io_if_description)) {
-+ printk(KERN_CRIT "ETRAX100LX async serial: Could not allocate IO pins for %s, port %d\n",
-+ info->io_if_description,
-+ i);
-+ info->enabled = 0;
-+ }
-+ }
- info->uses_dma_in = 0;
- info->uses_dma_out = 0;
- info->line = i;
-@@ -4939,64 +4938,16 @@
- #endif
-
- #ifndef CONFIG_SVINTO_SIM
-+#ifndef CONFIG_ETRAX_KGDB
- /* Not needed in simulator. May only complicate stuff. */
- /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */
-
-- if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL))
-- panic("irq8");
--
--#ifdef CONFIG_ETRAX_SERIAL_PORT0
--#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
-- if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL))
-- panic("irq22");
--#endif
--#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
-- if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL))
-- panic("irq23");
--#endif
--#endif
--
--#ifdef CONFIG_ETRAX_SERIAL_PORT1
--#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT
-- if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL))
-- panic("irq24");
--#endif
--#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN
-- if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL))
-- panic("irq25");
--#endif
--#endif
--#ifdef CONFIG_ETRAX_SERIAL_PORT2
-- /* DMA Shared with par0 (and SCSI0 and ATA) */
--#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
-- if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL))
-- panic("irq18");
--#endif
--#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
-- if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL))
-- panic("irq19");
--#endif
--#endif
--#ifdef CONFIG_ETRAX_SERIAL_PORT3
-- /* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */
--#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT
-- if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL))
-- panic("irq20");
--#endif
--#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN
-- if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL))
-- panic("irq21");
--#endif
--#endif
-+ if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", driver))
-+ panic("%s: Failed to request irq8", __FUNCTION__);
-
--#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST
-- if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED,
-- "fast serial dma timeout", NULL)) {
-- printk(KERN_CRIT "err: timer1 irq\n");
-- }
- #endif
- #endif /* CONFIG_SVINTO_SIM */
-- debug_write_function = rs_debug_write_function;
-+
- return 0;
- }
-
---- linux-2.6.19.2.orig/drivers/serial/crisv10.h 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/serial/crisv10.h 2006-10-13 14:44:38.000000000 +0200
-@@ -9,6 +9,8 @@
-
- #include <linux/circ_buf.h>
- #include <asm/termios.h>
-+#include <asm/dma.h>
-+#include <asm/arch/io_interface_mux.h>
-
- /* Software state per channel */
-
-@@ -61,6 +63,19 @@
- u8 dma_in_enabled:1; /* Set to 1 if DMA should be used */
-
- /* end of fields defined in rs_table[] in .c-file */
-+ int dma_owner;
-+ unsigned int dma_in_nbr;
-+ unsigned int dma_out_nbr;
-+ unsigned int dma_in_irq_nbr;
-+ unsigned int dma_out_irq_nbr;
-+ unsigned long dma_in_irq_flags;
-+ unsigned long dma_out_irq_flags;
-+ char *dma_in_irq_description;
-+ char *dma_out_irq_description;
-+
-+ enum cris_io_interface io_if;
-+ char *io_if_description;
-+
- u8 uses_dma_in; /* Set to 1 if DMA is used */
- u8 uses_dma_out; /* Set to 1 if DMA is used */
- u8 forced_eop; /* a fifo eop has been forced */
---- linux-2.6.19.2.orig/drivers/serial/crisv32.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/serial/crisv32.c 2007-01-05 09:59:53.000000000 +0100
-@@ -0,0 +1,2333 @@
-+/* $Id: crisv32.c,v 1.78 2007/01/05 08:59:53 starvik Exp $
-+ *
-+ * Serial port driver for the ETRAX FS chip
-+ *
-+ * Copyright (C) 1998-2006 Axis Communications AB
-+ *
-+ * Many, many authors. Based once upon a time on serial.c for 16x50.
-+ *
-+ * Johan Adolfsson - port to ETRAX FS
-+ * Mikael Starvik - port to serial_core framework
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/console.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/serial_core.h>
-+
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/uaccess.h>
-+
-+#include <asm/arch/dma.h>
-+#include <asm/arch/system.h>
-+#include <asm/arch/pinmux.h>
-+#include <asm/arch/hwregs/dma.h>
-+#include <asm/arch/hwregs/reg_rdwr.h>
-+#include <asm/arch/hwregs/ser_defs.h>
-+#include <asm/arch/hwregs/dma_defs.h>
-+#include <asm/arch/hwregs/gio_defs.h>
-+#include <asm/arch/hwregs/intr_vect_defs.h>
-+#include <asm/arch/hwregs/reg_map.h>
-+
-+#define UART_NR 5 /* 4 ports + dummy port */
-+#define SERIAL_RECV_DESCRIPTORS 8
-+
-+/* We only buffer 255 characters here, no need for more tx descriptors. */
-+#define SERIAL_TX_DESCRIPTORS 4
-+
-+/* Kept for experimental purposes. */
-+#define ETRAX_SER_FIFO_SIZE 1
-+#define SERIAL_DESCR_BUF_SIZE 256
-+#define regi_NULL 0
-+#define DMA_WAIT_UNTIL_RESET(inst) \
-+ do { \
-+ reg_dma_rw_stat r; \
-+ do { \
-+ r = REG_RD(dma, (inst), rw_stat); \
-+ } while (r.mode != regk_dma_rst); \
-+ } while (0)
-+
-+/* Macro to set up control lines for a port. */
-+#define SETUP_PINS(port) \
-+ if (serial_cris_ports[port].used) { \
-+ if (strcmp(CONFIG_ETRAX_SER##port##_DTR_BIT, "")) \
-+ crisv32_io_get_name(&serial_cris_ports[port].dtr_pin, \
-+ CONFIG_ETRAX_SER##port##_DTR_BIT); \
-+ else \
-+ serial_cris_ports[port].dtr_pin = dummy_pin; \
-+ if (strcmp(CONFIG_ETRAX_SER##port##_DSR_BIT, "")) \
-+ crisv32_io_get_name(&serial_cris_ports[port].dsr_pin, \
-+ CONFIG_ETRAX_SER##port##_DSR_BIT); \
-+ else \
-+ serial_cris_ports[port].dsr_pin = dummy_pin; \
-+ if (strcmp(CONFIG_ETRAX_SER##port##_RI_BIT, "")) \
-+ crisv32_io_get_name(&serial_cris_ports[port].ri_pin, \
-+ CONFIG_ETRAX_SER##port##_RI_BIT); \
-+ else \
-+ serial_cris_ports[port].ri_pin = dummy_pin; \
-+ if (strcmp(CONFIG_ETRAX_SER##port##_CD_BIT, "")) \
-+ crisv32_io_get_name(&serial_cris_ports[port].cd_pin, \
-+ CONFIG_ETRAX_SER##port##_CD_BIT); \
-+ else \
-+ serial_cris_ports[port].cd_pin = dummy_pin; \
-+ }
-+
-+/* Set a serial port register if anything has changed. */
-+#define MODIFY_REG(instance, reg, var) \
-+ if (REG_RD_INT(ser, instance, reg) \
-+ != REG_TYPE_CONV(int, reg_ser_##reg, var)) \
-+ REG_WR(ser, instance, reg, var);
-+
-+/*
-+ * Regarding RS485 operation in crisv32 serial driver.
-+ * ---------------------------------------------------
-+ * RS485 can be run in two modes, full duplex using four wires (485FD) and
-+ * half duplex using two wires (485HD). The default mode of each serial port
-+ * is configured in the kernel configuration. The available modes are:
-+ * RS-232, RS-485 half duplex, and RS-485 full duplex.
-+ *
-+ * In the 485HD mode the direction of the data bus must be able to switch.
-+ * The direction of the transceiver is controlled by the RTS signal. Hence
-+ * the auto_rts function in the ETRAX FS chip is enabled in this mode, which
-+ * automatically toggle RTS when transmitting. The initial direction of the
-+ * port is receiving.
-+ *
-+ * In the 485FD mode two transceivers will be used, one in each direction.
-+ * Usually the hardware can handle both 485HD and 485FD, which implies that
-+ * one of the transceivers can change direction. Consequently that transceiver
-+ * must be tied to operate in the opposite direction of the other one, setting
-+ * and keeping RTS to a fixed value do this.
-+ *
-+ * There are two special "ioctl" that can configure the ports. These two are
-+ * left for backward compatible with older applications. The effects of using
-+ * them are described below:
-+ * The TIOCSERSETRS485:
-+ * This ioctl sets a serial port in 232 mode to 485HD mode or vise versa. The
-+ * state of the port is kept when closing the port. Note that this ioctl has no
-+ * effect on a serial port in the 485FD mode.
-+ * The TIOCSERWRRS485:
-+ * This ioctl set a serial port in 232 mode to 485HD mode and writes the data
-+ * "included" in the ioctl to the port. The port will then stay in 485HD mode.
-+ * Using this ioctl on a serial port in the 485HD mode will transmit the data
-+ * without changing the mode. Using this ioctl on a serial port in 485FD mode
-+ * will not change the mode and simply send the data using the 485FD mode.
-+ */
-+
-+#define TYPE_232 0
-+#define TYPE_485HD 1
-+#define TYPE_485FD 2
-+
-+struct etrax_recv_buffer {
-+ struct etrax_recv_buffer *next;
-+ unsigned short length;
-+ unsigned char error;
-+ unsigned char pad;
-+
-+ unsigned char buffer[0];
-+};
-+
-+struct uart_cris_port {
-+ struct uart_port port;
-+
-+ int initialized;
-+ int used;
-+ int irq;
-+
-+ /* Used to check if port enabled as well by testing for zero. */
-+ reg_scope_instances regi_ser;
-+ reg_scope_instances regi_dmain;
-+ reg_scope_instances regi_dmaout;
-+
-+ struct crisv32_iopin dtr_pin;
-+ struct crisv32_iopin dsr_pin;
-+ struct crisv32_iopin ri_pin;
-+ struct crisv32_iopin cd_pin;
-+
-+ struct dma_descr_context tr_context_descr
-+ __attribute__ ((__aligned__(32)));
-+ struct dma_descr_data tr_descr[SERIAL_TX_DESCRIPTORS]
-+ __attribute__ ((__aligned__(32)));
-+ struct dma_descr_context rec_context_descr
-+ __attribute__ ((__aligned__(32)));
-+ struct dma_descr_data rec_descr[SERIAL_RECV_DESCRIPTORS]
-+ __attribute__ ((__aligned__(32)));
-+
-+ /* This is the first one in the list the HW is working on now. */
-+ struct dma_descr_data* first_tx_descr;
-+
-+ /* This is the last one in the list the HW is working on now. */
-+ struct dma_descr_data* last_tx_descr;
-+
-+ /* This is how many characters the HW is working on now. */
-+ unsigned int tx_pending_chars;
-+
-+ int tx_started;
-+ unsigned int cur_rec_descr;
-+ struct etrax_recv_buffer *first_recv_buffer;
-+ struct etrax_recv_buffer *last_recv_buffer;
-+
-+ unsigned int recv_cnt;
-+ unsigned int max_recv_cnt;
-+
-+ /* The time for 1 char, in usecs. */
-+ unsigned long char_time_usec;
-+
-+ /* Last tx usec in the jiffies. */
-+ unsigned long last_tx_active_usec;
-+
-+ /* Last tx time in jiffies. */
-+ unsigned long last_tx_active;
-+
-+ /* Last rx usec in the jiffies. */
-+ unsigned long last_rx_active_usec;
-+
-+ /* Last rx time in jiffies. */
-+ unsigned long last_rx_active;
-+
-+#ifdef CONFIG_ETRAX_RS485
-+ /* RS-485 support, duh. */
-+ struct rs485_control rs485;
-+#endif
-+ int port_type;
-+};
-+
-+extern struct uart_driver serial_cris_driver;
-+static struct uart_port *console_port;
-+static int console_baud = 115200;
-+static struct uart_cris_port serial_cris_ports[UART_NR] = {
-+{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+ .used = 1,
-+ .irq = SER0_INTR_VECT,
-+ .regi_ser = regi_ser0,
-+ /*
-+ * We initialize the dma stuff like this to get a compiler error
-+ * if a CONFIG is missing
-+ */
-+ .regi_dmain =
-+# ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
-+ regi_dma7,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN
-+ regi_NULL,
-+# endif
-+
-+ .regi_dmaout =
-+# ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
-+ regi_dma6,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT
-+ regi_NULL,
-+# endif
-+
-+# ifdef CONFIG_ETRAX_RS485
-+# ifdef CONFIG_ETRAX_SERIAL_PORT0_TYPE_485HD
-+ .port_type = TYPE_485HD,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT0_TYPE_485FD
-+ .port_type = TYPE_485FD,
-+# endif
-+# endif
-+#else
-+ .regi_ser = regi_NULL,
-+ .regi_dmain = regi_NULL,
-+ .regi_dmaout = regi_NULL,
-+#endif
-+}, /* ttyS0 */
-+{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+ .used = 1,
-+ .irq = SER1_INTR_VECT,
-+ .regi_ser = regi_ser1,
-+ .regi_dmain =
-+# ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN
-+ regi_dma5,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN
-+ regi_NULL,
-+# endif
-+
-+ .regi_dmaout =
-+# ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT
-+ regi_dma4,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT
-+ regi_NULL,
-+# endif
-+
-+# ifdef CONFIG_ETRAX_RS485
-+# ifdef CONFIG_ETRAX_SERIAL_PORT1_TYPE_485HD
-+ .port_type = TYPE_485HD,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT1_TYPE_485FD
-+ .port_type = TYPE_485FD,
-+# endif
-+# endif
-+#else
-+ .regi_ser = regi_NULL,
-+ .regi_dmain = regi_NULL,
-+ .regi_dmaout = regi_NULL,
-+#endif
-+}, /* ttyS1 */
-+{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+ .used = 1,
-+ .irq = SER2_INTR_VECT,
-+ .regi_ser = regi_ser2,
-+ .regi_dmain =
-+# ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
-+ regi_dma3,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN
-+ regi_NULL,
-+# endif
-+
-+ .regi_dmaout =
-+# ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
-+ regi_dma2,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT
-+ regi_NULL,
-+# endif
-+
-+# ifdef CONFIG_ETRAX_RS485
-+# ifdef CONFIG_ETRAX_SERIAL_PORT2_TYPE_485HD
-+ .port_type = TYPE_485HD,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT2_TYPE_485FD
-+ .port_type = TYPE_485FD,
-+# endif
-+# endif
-+#else
-+ .regi_ser = regi_NULL,
-+ .regi_dmain = regi_NULL,
-+ .regi_dmaout = regi_NULL,
-+#endif
-+}, /* ttyS2 */
-+{
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+ .used = 1,
-+ .irq = SER3_INTR_VECT,
-+ .regi_ser = regi_ser3,
-+ .regi_dmain =
-+# ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN
-+ regi_dma9,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN
-+ regi_NULL,
-+# endif
-+
-+ .regi_dmaout =
-+# ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT
-+ regi_dma8,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT
-+ regi_NULL,
-+# endif
-+
-+# ifdef CONFIG_ETRAX_RS485
-+# ifdef CONFIG_ETRAX_SERIAL_PORT3_TYPE_485HD
-+ .port_type = TYPE_485HD,
-+# endif
-+# ifdef CONFIG_ETRAX_SERIAL_PORT3_TYPE_485FD
-+ .port_type = TYPE_485FD,
-+# endif
-+# endif
-+#else
-+ .regi_ser = regi_NULL,
-+ .regi_dmain = regi_NULL,
-+ .regi_dmaout = regi_NULL,
-+#endif
-+}, /* ttyS3 */
-+{
-+#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL
-+ .used = 1,
-+#endif
-+ .regi_ser = regi_NULL
-+} /* Dummy console port */
-+
-+};
-+
-+/* Dummy pin used for unused CD, DSR, DTR and RI signals. */
-+static unsigned long io_dummy;
-+static struct crisv32_ioport dummy_port =
-+{
-+ &io_dummy,
-+ &io_dummy,
-+ &io_dummy,
-+ 18
-+};
-+static struct crisv32_iopin dummy_pin =
-+{
-+ &dummy_port,
-+ 0
-+};
-+
-+static int selected_console =
-+#if defined(CONFIG_ETRAX_DEBUG_PORT0)
-+0;
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
-+1;
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-+2;
-+#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
-+3;
-+#else /* CONFIG_ETRAX_DEBUG_PORT_NULL */
-+4;
-+#endif
-+
-+extern void reset_watchdog(void);
-+
-+/*
-+ * Interrupts are disabled on entering
-+ */
-+static void
-+cris_console_write(struct console *co, const char *s, unsigned int count)
-+{
-+ struct uart_cris_port *up;
-+ int i;
-+ reg_ser_r_stat_din stat;
-+ reg_ser_rw_tr_dma_en tr_dma_en, old;
-+
-+ up = &serial_cris_ports[selected_console];
-+
-+ /*
-+ * This function isn't covered by the struct uart_ops, so we
-+ * have to check manually that the port really is there,
-+ * configured and live.
-+ */
-+ if (!up->regi_ser)
-+ return;
-+
-+ /* Switch to manual mode. */
-+ tr_dma_en = old = REG_RD (ser, up->regi_ser, rw_tr_dma_en);
-+ if (tr_dma_en.en == regk_ser_yes) {
-+ tr_dma_en.en = regk_ser_no;
-+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en);
-+ }
-+
-+ /* Send data. */
-+ for (i = 0; i < count; i++) {
-+ /* LF -> CRLF */
-+ if (s[i] == '\n') {
-+ do {
-+ stat = REG_RD (ser, up->regi_ser, r_stat_din);
-+ } while (!stat.tr_rdy);
-+ REG_WR_INT (ser, up->regi_ser, rw_dout, '\r');
-+ }
-+ /* Wait until transmitter is ready and send. */
-+ do {
-+ stat = REG_RD (ser, up->regi_ser, r_stat_din);
-+ } while (!stat.tr_rdy);
-+ REG_WR_INT (ser, up->regi_ser, rw_dout, s[i]);
-+
-+ /* Feed watchdog, because this may take looong time. */
-+ reset_watchdog();
-+ }
-+
-+ /* Restore mode. */
-+ if (tr_dma_en.en != old.en)
-+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, old);
-+}
-+
-+static void cris_serial_port_init(struct uart_port *port, int line);
-+static int __init
-+cris_console_setup(struct console *co, char *options)
-+{
-+ struct uart_port *port;
-+ int baud = 115200;
-+ int bits = 8;
-+ int parity = 'n';
-+ int flow = 'n';
-+
-+ if (co->index >= UART_NR)
-+ co->index = 0;
-+ if (options)
-+ selected_console = co->index;
-+ port = &serial_cris_ports[selected_console].port;
-+ console_port = port;
-+
-+ if (options)
-+ uart_parse_options(options, &baud, &parity, &bits, &flow);
-+ console_baud = baud;
-+ cris_serial_port_init(port, selected_console);
-+ co->index = port->line;
-+ uart_set_options(port, co, baud, parity, bits, flow);
-+
-+ return 0;
-+}
-+
-+static struct tty_driver*
-+cris_console_device(struct console* co, int *index)
-+{
-+ struct uart_driver *p = co->data;
-+ *index = selected_console;
-+ return p->tty_driver;
-+}
-+
-+static struct console cris_console = {
-+ .name = "ttyS",
-+ .write = cris_console_write,
-+ .device = cris_console_device,
-+ .setup = cris_console_setup,
-+ .flags = CON_PRINTBUFFER,
-+ .index = -1,
-+ .data = &serial_cris_driver,
-+};
-+
-+#define SERIAL_CRIS_CONSOLE &cris_console
-+
-+struct uart_driver serial_cris_driver = {
-+ .owner = THIS_MODULE,
-+ .driver_name = "serial",
-+ .dev_name = "ttyS",
-+ .major = TTY_MAJOR,
-+ .minor = 64,
-+ .nr = UART_NR,
-+ .cons = SERIAL_CRIS_CONSOLE,
-+};
-+
-+static int inline crisv32_serial_get_rts(struct uart_cris_port *up)
-+{
-+ reg_scope_instances regi_ser = up->regi_ser;
-+ /*
-+ * Return what the user has controlled rts to or
-+ * what the pin is? (if auto_rts is used it differs during tx)
-+ */
-+ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din);
-+ return !(rstat.rts_n == regk_ser_active);
-+}
-+
-+/*
-+ * A set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive
-+ * 0=0V , 1=3.3V
-+ */
-+static inline void crisv32_serial_set_rts(struct uart_cris_port *up, int set)
-+{
-+ reg_scope_instances regi_ser = up->regi_ser;
-+
-+#ifdef CONFIG_ETRAX_RS485
-+ /* Never toggle RTS if port is in 485 mode. If port is in 485FD mode we
-+ * do not want to send with the reciever and for 485HD mode auto_rts
-+ * take care of the RTS for us.
-+ */
-+ if (!up->rs485.enabled) {
-+#else
-+ {
-+#endif
-+ unsigned long flags;
-+ reg_ser_rw_rec_ctrl rec_ctrl;
-+
-+ local_irq_save(flags);
-+ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
-+ if (set)
-+ rec_ctrl.rts_n = regk_ser_active;
-+ else
-+ rec_ctrl.rts_n = regk_ser_inactive;
-+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
-+ local_irq_restore(flags);
-+ }
-+}
-+
-+/* Input */
-+static int inline crisv32_serial_get_cts(struct uart_cris_port *up)
-+{
-+ reg_scope_instances regi_ser = up->regi_ser;
-+ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din);
-+ return (rstat.cts_n == regk_ser_active);
-+}
-+
-+/*
-+ * Send a single character for XON/XOFF purposes. We do it in this separate
-+ * function instead of the alternative support port.x_char, in the ...start_tx
-+ * function, so we don't mix up this case with possibly enabling transmission
-+ * of queued-up data (in case that's disabled after *receiving* an XOFF or
-+ * negative CTS). This function is used for both DMA and non-DMA case; see HW
-+ * docs specifically blessing sending characters manually when DMA for
-+ * transmission is enabled and running. We may be asked to transmit despite
-+ * the transmitter being disabled by a ..._stop_tx call so we need to enable
-+ * it temporarily but restore the state afterwards.
-+ *
-+ * Beware: I'm not sure how the RS-485 stuff is supposed to work. Using
-+ * XON/XOFF seems problematic if there are several controllers, but if it's
-+ * actually RS-422 (multi-drop; one sender and multiple receivers), it might
-+ * Just Work, so don't bail out just because it looks a little suspicious.
-+ */
-+
-+void serial_cris_send_xchar(struct uart_port *port, char ch)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ reg_ser_rw_dout dout = { .data = ch };
-+ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes };
-+ reg_ser_r_stat_din rstat;
-+ reg_ser_rw_tr_ctrl prev_tr_ctrl, tr_ctrl;
-+ reg_scope_instances regi_ser = up->regi_ser;
-+ unsigned long flags;
-+
-+ /*
-+ * Wait for tr_rdy in case a character is already being output. Make
-+ * sure we have integrity between the register reads and the writes
-+ * below, but don't busy-wait with interrupts off and the port lock
-+ * taken.
-+ */
-+ spin_lock_irqsave(&port->lock, flags);
-+ do {
-+ spin_unlock_irqrestore(&port->lock, flags);
-+ spin_lock_irqsave(&port->lock, flags);
-+ prev_tr_ctrl = tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
-+ rstat = REG_RD(ser, regi_ser, r_stat_din);
-+ } while (!rstat.tr_rdy);
-+
-+ /*
-+ * Ack an interrupt if one was just issued for the previous character
-+ * that was output. This is required for non-DMA as the interrupt is
-+ * used as the only indicator that the transmitter is ready and it
-+ * isn't while this x_char is being transmitted.
-+ */
-+ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr);
-+
-+ /* Enable the transmitter in case it was disabled. */
-+ tr_ctrl.stop = 0;
-+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
-+
-+ /*
-+ * Finally, send the blessed character; nothing should stop it now,
-+ * except for an xoff-detected state, which we'll handle below.
-+ */
-+ REG_WR(ser, regi_ser, rw_dout, dout);
-+ up->port.icount.tx++;
-+
-+ /* There might be an xoff state to clear. */
-+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
-+
-+ /*
-+ * Clear any xoff state that *may* have been there to
-+ * inhibit transmission of the character.
-+ */
-+ if (rstat.xoff_detect) {
-+ reg_ser_rw_xoff_clr xoff_clr = { .clr = 1 };
-+ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr);
-+ reg_ser_rw_tr_dma_en tr_dma_en
-+ = REG_RD(ser, regi_ser, rw_tr_dma_en);
-+
-+ /*
-+ * If we had an xoff state but cleared it, instead sneak in a
-+ * disabled state for the transmitter, after the character we
-+ * sent. Thus we keep the port disabled, just as if the xoff
-+ * state was still in effect (or actually, as if stop_tx had
-+ * been called, as we stop DMA too).
-+ */
-+ prev_tr_ctrl.stop = 1;
-+
-+ tr_dma_en.en = 0;
-+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
-+ }
-+
-+ /* Restore "previous" enabled/disabled state of the transmitter. */
-+ REG_WR(ser, regi_ser, rw_tr_ctrl, prev_tr_ctrl);
-+
-+ spin_unlock_irqrestore(&port->lock, flags);
-+}
-+
-+static void transmit_chars_dma(struct uart_cris_port *up);
-+
-+/*
-+ * Do not spin_lock_irqsave or disable interrupts by other means here; it's
-+ * already done by the caller.
-+ */
-+
-+static void serial_cris_start_tx(struct uart_port *port)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ reg_scope_instances regi_ser = up->regi_ser;
-+ reg_ser_rw_tr_ctrl tr_ctrl;
-+
-+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
-+ tr_ctrl.stop = regk_ser_no;
-+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
-+ if (!up->regi_dmaout) {
-+ reg_ser_rw_intr_mask intr_mask =
-+ REG_RD(ser, regi_ser, rw_intr_mask);
-+ intr_mask.tr_rdy = regk_ser_yes;
-+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
-+ } else {
-+ /*
-+ * We're called possibly to re-enable transmission after it
-+ * has been disabled. If so, DMA needs to be re-enabled.
-+ */
-+ reg_ser_rw_tr_dma_en tr_dma_en = { .en = 1 };
-+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
-+ transmit_chars_dma(up);
-+ }
-+}
-+
-+/*
-+ * This function handles both the DMA and non-DMA case by ordering the
-+ * transmitter to stop of after the current character. We don't need to wait
-+ * for any such character to be completely transmitted; we do that where it
-+ * matters, like in serial_cris_set_termios. Don't busy-wait here; see
-+ * Documentation/serial/driver: this function is called within
-+ * spin_lock_irq{,save} and thus separate ones would be disastrous (when SMP).
-+ * There's no documented need to set the txd pin to any particular value;
-+ * break setting is controlled solely by serial_cris_break_ctl.
-+ */
-+
-+static void serial_cris_stop_tx(struct uart_port *port)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ reg_scope_instances regi_ser = up->regi_ser;
-+ reg_ser_rw_tr_ctrl tr_ctrl;
-+ reg_ser_rw_intr_mask intr_mask;
-+ reg_ser_rw_tr_dma_en tr_dma_en = {0};
-+ reg_ser_rw_xoff_clr xoff_clr = {0};
-+
-+ /*
-+ * For the non-DMA case, we'd get a tr_rdy interrupt that we're not
-+ * interested in as we're not transmitting any characters. For the
-+ * DMA case, that interrupt is already turned off, but no reason to
-+ * waste code on conditionals here.
-+ */
-+ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
-+ intr_mask.tr_rdy = regk_ser_no;
-+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
-+
-+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
-+ tr_ctrl.stop = 1;
-+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
-+
-+ /*
-+ * Always clear possible hardware xoff-detected state here, no need to
-+ * unnecessary consider mctrl settings and when they change. We clear
-+ * it here rather than in start_tx: both functions are called as the
-+ * effect of XOFF processing, but start_tx is also called when upper
-+ * levels tell the driver that there are more characters to send, so
-+ * avoid adding code there.
-+ */
-+ xoff_clr.clr = 1;
-+ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr);
-+
-+ /*
-+ * Disable transmitter DMA, so that if we're in XON/XOFF, we can send
-+ * those single characters without also giving go-ahead for queued up
-+ * DMA data.
-+ */
-+ tr_dma_en.en = 0;
-+ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en);
-+}
-+
-+static void serial_cris_stop_rx(struct uart_port *port)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ reg_scope_instances regi_ser = up->regi_ser;
-+ reg_ser_rw_rec_ctrl rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
-+
-+ rec_ctrl.en = regk_ser_no;
-+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
-+}
-+
-+static void serial_cris_enable_ms(struct uart_port *port)
-+{
-+}
-+
-+static void check_modem_status(struct uart_cris_port *up)
-+{
-+}
-+
-+static unsigned int serial_cris_tx_empty(struct uart_port *port)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ unsigned long flags;
-+ unsigned int ret;
-+ reg_ser_r_stat_din rstat = {0};
-+
-+ spin_lock_irqsave(&up->port.lock, flags);
-+ if (up->regi_dmaout) {
-+ /*
-+ * For DMA, before looking at r_stat, we need to check that we
-+ * either haven't actually started or that end-of-list is
-+ * reached, else a tr_empty indication is just an internal
-+ * state. The caller qualifies, if needed, that the
-+ * port->info.xmit buffer is empty, so we don't need to
-+ * check that.
-+ */
-+ reg_dma_rw_stat status = REG_RD(dma, up->regi_dmaout, rw_stat);
-+
-+ if (!up->tx_started) {
-+ ret = 1;
-+ goto done;
-+ }
-+
-+ if (status.list_state != regk_dma_data_at_eol) {
-+ ret = 0;
-+ goto done;
-+ }
-+ }
-+
-+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
-+ ret = rstat.tr_empty ? TIOCSER_TEMT : 0;
-+
-+ done:
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+ return ret;
-+}
-+static unsigned int serial_cris_get_mctrl(struct uart_port *port)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ unsigned int ret;
-+
-+ ret = 0;
-+ if (crisv32_serial_get_rts(up))
-+ ret |= TIOCM_RTS;
-+ if (crisv32_io_rd(&up->dtr_pin))
-+ ret |= TIOCM_DTR;
-+ if (crisv32_io_rd(&up->cd_pin))
-+ ret |= TIOCM_CD;
-+ if (crisv32_io_rd(&up->ri_pin))
-+ ret |= TIOCM_RI;
-+ if (!crisv32_io_rd(&up->dsr_pin))
-+ ret |= TIOCM_DSR;
-+ if (crisv32_serial_get_cts(up))
-+ ret |= TIOCM_CTS;
-+ return ret;
-+}
-+
-+static void serial_cris_set_mctrl(struct uart_port *port, unsigned int mctrl)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+
-+ crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0);
-+ crisv32_io_set(&up->dtr_pin, mctrl & TIOCM_DTR ? 1 : 0);
-+ crisv32_io_set(&up->ri_pin, mctrl & TIOCM_RNG ? 1 : 0);
-+ crisv32_io_set(&up->cd_pin, mctrl & TIOCM_CD ? 1 : 0);
-+}
-+
-+static void serial_cris_break_ctl(struct uart_port *port, int break_state)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ unsigned long flags;
-+ reg_ser_rw_tr_ctrl tr_ctrl;
-+ reg_ser_rw_tr_dma_en tr_dma_en;
-+ reg_ser_rw_intr_mask intr_mask;
-+
-+ spin_lock_irqsave(&up->port.lock, flags);
-+ tr_ctrl = REG_RD(ser, up->regi_ser, rw_tr_ctrl);
-+ tr_dma_en = REG_RD(ser, up->regi_ser, rw_tr_dma_en);
-+ intr_mask = REG_RD(ser, up->regi_ser, rw_intr_mask);
-+
-+ if (break_state != 0) { /* Send break */
-+ /*
-+ * We need to disable DMA (if used) or tr_rdy interrupts if no
-+ * DMA. No need to make this conditional on use of DMA;
-+ * disabling will be a no-op for the other mode.
-+ */
-+ intr_mask.tr_rdy = regk_ser_no;
-+ tr_dma_en.en = 0;
-+
-+ /*
-+ * Stop transmission and set the txd pin to 0 after the
-+ * current character. The txd setting will take effect after
-+ * any current transmission has completed.
-+ */
-+ tr_ctrl.stop = 1;
-+ tr_ctrl.txd = 0;
-+ } else {
-+ /* Re-enable either transmit DMA or the serial interrupt. */
-+ if (up->regi_dmaout)
-+ tr_dma_en.en = 1;
-+ else
-+ intr_mask.tr_rdy = regk_ser_yes;
-+
-+
-+ tr_ctrl.stop = 0;
-+ tr_ctrl.txd = 1;
-+ }
-+ REG_WR(ser, up->regi_ser, rw_tr_ctrl, tr_ctrl);
-+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en);
-+ REG_WR(ser, up->regi_ser, rw_intr_mask, intr_mask);
-+
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+}
-+
-+/*
-+ * The output DMA channel is free - use it to send as many chars as
-+ * possible.
-+ */
-+
-+static void
-+transmit_chars_dma(struct uart_cris_port *up)
-+{
-+ struct dma_descr_data *descr, *pending_descr, *dmapos;
-+ struct dma_descr_data *last_tx_descr;
-+ struct circ_buf *xmit = &up->port.info->xmit;
-+ unsigned int sentl = 0;
-+ reg_dma_rw_ack_intr ack_intr = { .data = regk_dma_yes };
-+ reg_dma_rw_stat status;
-+ reg_scope_instances regi_dmaout = up->regi_dmaout;
-+ unsigned int chars_in_q;
-+ unsigned int chars_to_send;
-+
-+ /* Acknowledge dma data descriptor irq, if there was one. */
-+ REG_WR(dma, regi_dmaout, rw_ack_intr, ack_intr);
-+
-+ /*
-+ * First get the amount of bytes sent during the last DMA transfer,
-+ * and update xmit accordingly.
-+ */
-+ status = REG_RD(dma, regi_dmaout, rw_stat);
-+ if (status.list_state == regk_dma_data_at_eol || !up->tx_started)
-+ dmapos = phys_to_virt((int)up->last_tx_descr->next);
-+ else
-+ dmapos = phys_to_virt(REG_RD_INT(dma, regi_dmaout, rw_data));
-+
-+ pending_descr = up->first_tx_descr;
-+ while (pending_descr != dmapos) {
-+ sentl += pending_descr->after - pending_descr->buf;
-+ pending_descr->after = pending_descr->buf = NULL;
-+ pending_descr = phys_to_virt((int)pending_descr->next);
-+ }
-+
-+ up->first_tx_descr = pending_descr;
-+ last_tx_descr = up->last_tx_descr;
-+
-+ /* Update stats. */
-+ up->port.icount.tx += sentl;
-+
-+ up->tx_pending_chars -= sentl;
-+
-+ /* Update xmit buffer. */
-+ xmit->tail = (xmit->tail + sentl) & (UART_XMIT_SIZE - 1);
-+
-+ /*
-+ * Find out the largest amount of consecutive bytes we want to send
-+ * now.
-+ */
-+ chars_in_q = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
-+
-+ if (chars_in_q == 0)
-+ /* Tell upper layers that we're now idle. */
-+ goto done;
-+
-+ /* Some of those characters are actually pending output. */
-+ chars_to_send = chars_in_q - up->tx_pending_chars;
-+
-+ /*
-+ * Clamp the new number of pending chars to the advertised
-+ * one.
-+ */
-+ if (chars_to_send + up->tx_pending_chars > up->port.fifosize)
-+ chars_to_send = up->port.fifosize - up->tx_pending_chars;
-+
-+ /* If we don't want to send any, we're done. */
-+ if (chars_to_send == 0)
-+ goto done;
-+
-+ descr = phys_to_virt((int)last_tx_descr->next);
-+
-+ /*
-+ * We can't send anything if we could make the condition in
-+ * the while-loop above (reaping finished descriptors) be met
-+ * immediately before the first iteration. However, don't
-+ * mistake the full state for the empty state.
-+ */
-+ if ((descr == up->first_tx_descr && up->tx_pending_chars != 0)
-+ || descr->next == up->first_tx_descr)
-+ goto done;
-+
-+ /* Set up the descriptor for output. */
-+ descr->buf = (void*)virt_to_phys(xmit->buf + xmit->tail
-+ + up->tx_pending_chars);
-+ descr->after = descr->buf + chars_to_send;
-+ descr->eol = 1;
-+ descr->out_eop = 0;
-+ descr->intr = 1;
-+ descr->wait = 0;
-+ descr->in_eop = 0;
-+ descr->md = 0;
-+ /*
-+ * Make sure GCC doesn't move this eol clear before the eol set
-+ * above.
-+ */
-+ barrier();
-+ last_tx_descr->eol = 0;
-+
-+ up->last_tx_descr = descr;
-+ up->tx_pending_chars += chars_to_send;
-+
-+ if (!up->tx_started) {
-+ up->tx_started = 1;
-+ up->tr_context_descr.next = 0;
-+ up->tr_context_descr.saved_data
-+ = (dma_descr_data*)virt_to_phys(descr);
-+ up->tr_context_descr.saved_data_buf = descr->buf;
-+ DMA_START_CONTEXT(regi_dmaout,
-+ virt_to_phys(&up->tr_context_descr));
-+ } else
-+ DMA_CONTINUE_DATA(regi_dmaout);
-+
-+ /* DMA is now running (hopefully). */
-+
-+ done:
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(&up->port);
-+}
-+
-+static void
-+transmit_chars_no_dma(struct uart_cris_port *up)
-+{
-+ int count;
-+ struct circ_buf *xmit = &up->port.info->xmit;
-+
-+ reg_scope_instances regi_ser = up->regi_ser;
-+ reg_ser_r_stat_din rstat;
-+ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes };
-+
-+ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
-+ /* No more to send, so disable the interrupt. */
-+ reg_ser_rw_intr_mask intr_mask;
-+ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask);
-+ intr_mask.tr_rdy = 0;
-+ intr_mask.tr_empty = 0;
-+ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask);
-+ return;
-+ }
-+
-+ count = ETRAX_SER_FIFO_SIZE;
-+ do {
-+ reg_ser_rw_dout dout = { .data = xmit->buf[xmit->tail] };
-+ REG_WR(ser, regi_ser, rw_dout, dout);
-+ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr);
-+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1);
-+ up->port.icount.tx++;
-+ if (xmit->head == xmit->tail)
-+ break;
-+ rstat = REG_RD(ser, regi_ser, r_stat_din);
-+ } while ((--count > 0) && rstat.tr_rdy);
-+
-+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
-+ uart_write_wakeup(&up->port);
-+} /* transmit_chars_no_dma */
-+
-+static struct etrax_recv_buffer *
-+alloc_recv_buffer(unsigned int size)
-+{
-+ struct etrax_recv_buffer *buffer;
-+
-+ if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC)))
-+ panic("%s: Could not allocate %d bytes buffer\n",
-+ __FUNCTION__, size);
-+
-+ buffer->next = NULL;
-+ buffer->length = 0;
-+ buffer->error = TTY_NORMAL;
-+
-+ return buffer;
-+}
-+
-+static void
-+append_recv_buffer(struct uart_cris_port *up,
-+ struct etrax_recv_buffer *buffer)
-+{
-+ unsigned long flags;
-+
-+ local_irq_save(flags);
-+
-+ if (!up->first_recv_buffer)
-+ up->first_recv_buffer = buffer;
-+ else
-+ up->last_recv_buffer->next = buffer;
-+
-+ up->last_recv_buffer = buffer;
-+
-+ up->recv_cnt += buffer->length;
-+ if (up->recv_cnt > up->max_recv_cnt)
-+ up->max_recv_cnt = up->recv_cnt;
-+
-+ local_irq_restore(flags);
-+}
-+
-+static int
-+add_char_and_flag(struct uart_cris_port *up, unsigned char data,
-+ unsigned char flag)
-+{
-+ struct etrax_recv_buffer *buffer;
-+
-+ buffer = alloc_recv_buffer(4);
-+ buffer->length = 1;
-+ buffer->error = flag;
-+ buffer->buffer[0] = data;
-+
-+ append_recv_buffer(up, buffer);
-+
-+ up->port.icount.rx++;
-+
-+ return 1;
-+}
-+
-+static void
-+flush_to_flip_buffer(struct uart_cris_port *up)
-+{
-+ struct tty_struct *tty;
-+ struct etrax_recv_buffer *buffer;
-+
-+ tty = up->port.info->tty;
-+ if (!up->first_recv_buffer || !tty)
-+ return;
-+
-+ while ((buffer = up->first_recv_buffer)) {
-+ unsigned int count = (unsigned int)
-+ tty_insert_flip_string(tty, buffer->buffer,
-+ buffer->length);
-+
-+ up->recv_cnt -= count;
-+
-+ if (count == buffer->length) {
-+ up->first_recv_buffer = buffer->next;
-+ kfree(buffer);
-+ } else {
-+ buffer->length -= count;
-+ memmove(buffer->buffer, buffer->buffer + count,
-+ buffer->length);
-+ buffer->error = TTY_NORMAL;
-+ }
-+ }
-+
-+ if (!up->first_recv_buffer)
-+ up->last_recv_buffer = NULL;
-+
-+ /* This call includes a check for low-latency. */
-+ tty_flip_buffer_push(tty);
-+}
-+
-+static unsigned int
-+handle_descr_data(struct uart_cris_port *up, struct dma_descr_data *descr,
-+ unsigned int recvl)
-+{
-+ struct etrax_recv_buffer *buffer
-+ = phys_to_virt((unsigned long)descr->buf) - sizeof *buffer;
-+
-+ if (up->recv_cnt + recvl > 65536) {
-+ printk(KERN_ERR "Too much pending incoming data on %s!"
-+ " Dropping %u bytes.\n", up->port.info->tty->name,
-+ recvl);
-+ return 0;
-+ }
-+
-+ buffer->length = recvl;
-+
-+ append_recv_buffer(up, buffer);
-+
-+ flush_to_flip_buffer(up);
-+
-+ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE);
-+ descr->buf = (void*)virt_to_phys(buffer->buffer);
-+ descr->after = descr->buf + SERIAL_DESCR_BUF_SIZE;
-+
-+ return recvl;
-+}
-+
-+static unsigned int
-+handle_all_descr_data(struct uart_cris_port *up)
-+{
-+ struct dma_descr_data *descr
-+ = &up->rec_descr[(up->cur_rec_descr - 1)
-+ % SERIAL_RECV_DESCRIPTORS];
-+ struct dma_descr_data *prev_descr;
-+ unsigned int recvl;
-+ unsigned int ret = 0;
-+ reg_scope_instances regi_dmain = up->regi_dmain;
-+
-+ while (1) {
-+ prev_descr = descr;
-+ descr = &up->rec_descr[up->cur_rec_descr];
-+
-+ if (descr == phys_to_virt(REG_RD(dma, regi_dmain, rw_data)))
-+ break;
-+
-+ if (++up->cur_rec_descr == SERIAL_RECV_DESCRIPTORS)
-+ up->cur_rec_descr = 0;
-+
-+ /* Find out how many bytes were read. */
-+ recvl = descr->after - descr->buf;
-+
-+ /* Update stats. */
-+ up->port.icount.rx += recvl;
-+
-+ ret += handle_descr_data(up, descr, recvl);
-+ descr->eol = 1;
-+ /*
-+ * Make sure GCC doesn't move this eol clear before the
-+ * eol set above.
-+ */
-+ barrier();
-+ prev_descr->eol = 0;
-+ flush_dma_descr(descr,1); // Cache bug workaround
-+ flush_dma_descr(prev_descr,0); // Cache bug workaround
-+ }
-+
-+ return ret;
-+}
-+
-+static void
-+receive_chars_dma(struct uart_cris_port *up)
-+{
-+ reg_ser_r_stat_din rstat;
-+ reg_dma_rw_ack_intr ack_intr = {0};
-+
-+ /* Acknowledge both dma_descr and dma_eop irq. */
-+ ack_intr.data = 1;
-+ ack_intr.in_eop = 1;
-+ REG_WR(dma, up->regi_dmain, rw_ack_intr, ack_intr);
-+
-+ handle_all_descr_data(up);
-+
-+ /* Read the status register to detect errors. */
-+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
-+
-+ if (rstat.framing_err | rstat.par_err | rstat.orun) {
-+ /*
-+ * If we got an error, we must reset it by reading the
-+ * rs_stat_din register and put the data in buffer manually.
-+ */
-+ reg_ser_rs_stat_din stat_din;
-+ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din);
-+
-+ if (stat_din.par_err)
-+ add_char_and_flag(up, stat_din.data, TTY_PARITY);
-+ else if (stat_din.orun)
-+ add_char_and_flag(up, stat_din.data, TTY_OVERRUN);
-+ else if (stat_din.framing_err)
-+ add_char_and_flag(up, stat_din.data, TTY_FRAME);
-+ }
-+
-+ /* Restart the receiving DMA, in case it got stuck on an EOL. */
-+ DMA_CONTINUE_DATA(up->regi_dmain);
-+}
-+
-+void receive_chars_no_dma(struct uart_cris_port *up)
-+{
-+ reg_ser_rs_stat_din stat_din;
-+ reg_ser_r_stat_din rstat;
-+ struct tty_struct *tty;
-+ struct uart_icount *icount;
-+ int max_count = 16;
-+ char flag;
-+ reg_ser_rw_ack_intr ack_intr = { 0 };
-+
-+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
-+ up->last_rx_active_usec = GET_JIFFIES_USEC();
-+ up->last_rx_active = jiffies;
-+ icount = &up->port.icount;
-+ tty = up->port.info->tty;
-+
-+ do {
-+ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din);
-+
-+ flag = TTY_NORMAL;
-+ ack_intr.dav = 1;
-+ REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr);
-+ icount->rx++;
-+
-+ if (stat_din.framing_err | stat_din.par_err | stat_din.orun) {
-+ if (stat_din.data == 0x00 &&
-+ stat_din.framing_err) {
-+ /* Most likely a break. */
-+ flag = TTY_BREAK;
-+ icount->brk++;
-+ } else if (stat_din.par_err) {
-+ flag = TTY_PARITY;
-+ icount->parity++;
-+ } else if (stat_din.orun) {
-+ flag = TTY_OVERRUN;
-+ icount->overrun++;
-+ } else if (stat_din.framing_err) {
-+ flag = TTY_FRAME;
-+ icount->frame++;
-+ }
-+ }
-+
-+ /*
-+ * If this becomes important, we probably *could* handle this
-+ * gracefully by keeping track of the unhandled character.
-+ */
-+ if (!tty_insert_flip_char(tty, stat_din.data, flag))
-+ panic("%s: No tty buffer space", __FUNCTION__);
-+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
-+ } while (rstat.dav && (max_count-- > 0));
-+ spin_unlock(&up->port.lock);
-+ tty_flip_buffer_push(tty);
-+ spin_lock(&up->port.lock);
-+} /* receive_chars_no_dma */
-+
-+/*
-+ * DMA output channel interrupt handler.
-+ * this interrupt is called from DMA2(ser2), DMA8(ser3), DMA6(ser0) or
-+ * DMA4(ser1) when they have finished a descriptor with the intr flag set.
-+ */
-+
-+static irqreturn_t
-+dma_tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
-+ reg_dma_r_masked_intr masked_intr;
-+ reg_scope_instances regi_dmaout;
-+ int handled = 0;
-+
-+ spin_lock(&up->port.lock);
-+ regi_dmaout = up->regi_dmaout;
-+ if (!regi_dmaout) {
-+ spin_unlock(&up->port.lock);
-+ return IRQ_NONE;
-+ }
-+
-+ /*
-+ * Check for dma_descr (don't need to check for dma_eop in
-+ * output DMA for serial).
-+ */
-+ masked_intr = REG_RD(dma, regi_dmaout, r_masked_intr);
-+
-+ if (masked_intr.data) {
-+ /* We can send a new dma bunch. make it so. */
-+
-+ /*
-+ * Read jiffies_usec first.
-+ * We want this time to be as late as possible.
-+ */
-+ up->last_tx_active_usec = GET_JIFFIES_USEC();
-+ up->last_tx_active = jiffies;
-+ transmit_chars_dma(up);
-+ handled = 1;
-+ }
-+ check_modem_status(up);
-+ spin_unlock(&up->port.lock);
-+ return IRQ_RETVAL(handled);
-+}
-+
-+/* DMA input channel interrupt handler. */
-+
-+static irqreturn_t
-+dma_rec_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
-+ reg_dma_r_masked_intr masked_intr;
-+ reg_scope_instances regi_dmain;
-+ int handled = 0;
-+
-+ spin_lock(&up->port.lock);
-+ regi_dmain = up->regi_dmain;
-+ if (!regi_dmain) {
-+ spin_unlock(&up->port.lock);
-+ return IRQ_NONE;
-+ }
-+
-+ /* Check for both dma_eop and dma_descr for the input dma channel. */
-+ masked_intr = REG_RD(dma, regi_dmain, r_masked_intr);
-+ if (masked_intr.data || masked_intr.in_eop) {
-+ /* We have received something. */
-+ receive_chars_dma(up);
-+ handled = 1;
-+ }
-+ check_modem_status(up);
-+ spin_unlock(&up->port.lock);
-+ return IRQ_RETVAL(handled);
-+}
-+
-+/* "Normal" serial port interrupt handler - both rx and tx. */
-+
-+static irqreturn_t
-+ser_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)dev_id;
-+ reg_scope_instances regi_ser;
-+ int handled = 0;
-+
-+ spin_lock(&up->port.lock);
-+ if (up->regi_dmain && up->regi_dmaout) {
-+ spin_unlock(&up->port.lock);
-+ return IRQ_NONE;
-+ }
-+
-+ regi_ser = up->regi_ser;
-+
-+ if (regi_ser) {
-+ reg_ser_r_masked_intr masked_intr;
-+ masked_intr = REG_RD(ser, regi_ser, r_masked_intr);
-+ /*
-+ * Check what interrupts are active before taking
-+ * actions. If DMA is used the interrupt shouldn't
-+ * be enabled.
-+ */
-+ if (masked_intr.dav) {
-+ receive_chars_no_dma(up);
-+ handled = 1;
-+ }
-+ check_modem_status(up);
-+
-+ if (masked_intr.tr_rdy) {
-+ transmit_chars_no_dma(up);
-+ handled = 1;
-+ }
-+ }
-+ spin_unlock(&up->port.lock);
-+ return IRQ_RETVAL(handled);
-+} /* ser_interrupt */
-+
-+static int start_recv_dma(struct uart_cris_port *up)
-+{
-+ struct dma_descr_data *descr = up->rec_descr;
-+ struct etrax_recv_buffer *buffer;
-+ int i;
-+
-+ /* Set up the receiving descriptors. */
-+ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) {
-+ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE);
-+ descr[i].next = (void*)virt_to_phys(&descr[i+1]);
-+ descr[i].buf = (void*)virt_to_phys(buffer->buffer);
-+ descr[i].after = descr[i].buf + SERIAL_DESCR_BUF_SIZE;
-+ descr[i].eol = 0;
-+ descr[i].out_eop = 0;
-+ descr[i].intr = 1;
-+ descr[i].wait = 0;
-+ descr[i].in_eop = 0;
-+ descr[i].md = 0;
-+
-+ }
-+
-+ /* Link the last descriptor to the first. */
-+ descr[i-1].next = (void*)virt_to_phys(&descr[0]);
-+
-+ /* And mark it as end of list. */
-+ descr[i-1].eol = 1;
-+
-+ /* Start with the first descriptor in the list. */
-+ up->cur_rec_descr = 0;
-+ up->rec_context_descr.next = 0;
-+ up->rec_context_descr.saved_data
-+ = (dma_descr_data *)virt_to_phys(&descr[up->cur_rec_descr]);
-+ up->rec_context_descr.saved_data_buf = descr[up->cur_rec_descr].buf;
-+
-+ /* Start the DMA. */
-+ DMA_START_CONTEXT(up->regi_dmain,
-+ virt_to_phys(&up->rec_context_descr));
-+
-+ /* Input DMA should be running now. */
-+ return 1;
-+}
-+
-+
-+static void start_receive(struct uart_cris_port *up)
-+{
-+ reg_scope_instances regi_dmain = up->regi_dmain;
-+ if (regi_dmain) {
-+ start_recv_dma(up);
-+ }
-+}
-+
-+
-+static void start_transmitter(struct uart_cris_port *up)
-+{
-+ int i;
-+ reg_scope_instances regi_dmaout = up->regi_dmaout;
-+ if (regi_dmaout) {
-+ for (i = 0; i < SERIAL_TX_DESCRIPTORS; i++) {
-+ memset(&up->tr_descr[i], 0, sizeof(up->tr_descr[i]));
-+ up->tr_descr[i].eol = 1;
-+ up->tr_descr[i].intr = 1;
-+ up->tr_descr[i].next = (dma_descr_data *)
-+ virt_to_phys(&up->tr_descr[i+1]);
-+ }
-+ up->tr_descr[i-1].next = (dma_descr_data *)
-+ virt_to_phys(&up->tr_descr[0]);
-+ up->first_tx_descr = &up->tr_descr[0];
-+
-+ /*
-+ * We'll be counting up to up->last_tx_descr->next from
-+ * up->first_tx_descr when starting DMA, so we should make
-+ * them the same for the very first round. If instead we'd
-+ * set last_tx_descr = first_tx_descr, we'd rely on
-+ * accidentally working code and data as we'd take a pass over
-+ * the first, unused, descriptor.
-+ */
-+ up->last_tx_descr = &up->tr_descr[i-1];
-+ up->tx_started = 0;
-+ up->tx_pending_chars = 0;
-+ }
-+}
-+
-+static int serial_cris_startup(struct uart_port *port)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ unsigned long flags;
-+ reg_intr_vect_rw_mask intr_mask;
-+ reg_ser_rw_intr_mask ser_intr_mask = {0};
-+ reg_dma_rw_intr_mask dmain_intr_mask = {0};
-+ reg_dma_rw_intr_mask dmaout_intr_mask = {0};
-+ reg_dma_rw_cfg cfg = {.en = 1};
-+ reg_scope_instances regi_dma;
-+
-+ spin_lock_irqsave(&up->port.lock, flags);
-+
-+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
-+
-+ dmain_intr_mask.data = dmain_intr_mask.in_eop = regk_dma_yes;
-+ dmaout_intr_mask.data = regk_dma_yes;
-+ if (!up->regi_dmain)
-+ ser_intr_mask.dav = regk_ser_yes;
-+
-+ if (port->line == 0) {
-+ if (request_irq(SER0_INTR_VECT, ser_interrupt,
-+ IRQF_SHARED | IRQF_DISABLED, "ser0",
-+ &serial_cris_ports[0]))
-+ panic("irq ser0");
-+ /* Enable the ser0 irq in global config. */
-+ intr_mask.ser0 = 1;
-+ /* Port ser0 can use dma6 for tx and dma7 for rx. */
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
-+ if (request_irq(DMA6_INTR_VECT, dma_tr_interrupt,
-+ IRQF_DISABLED, "serial 0 dma tr",
-+ &serial_cris_ports[0]))
-+ panic("irq ser0txdma");
-+ crisv32_request_dma(6, "ser0", DMA_PANIC_ON_ERROR, 0,
-+ dma_ser0);
-+ /* Enable the dma6 irq in global config. */
-+ intr_mask.dma6 = 1;
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
-+ if (request_irq(DMA7_INTR_VECT, dma_rec_interrupt,
-+ IRQF_DISABLED, "serial 0 dma rec",
-+ &serial_cris_ports[0]))
-+ panic("irq ser0rxdma");
-+ crisv32_request_dma(7, "ser0", DMA_PANIC_ON_ERROR, 0,
-+ dma_ser0);
-+ /* Enable the dma7 irq in global config. */
-+ intr_mask.dma7 = 1;
-+#endif
-+ } else if (port->line == 1) {
-+ if (request_irq(SER1_INTR_VECT, ser_interrupt,
-+ IRQF_SHARED | IRQF_DISABLED, "ser1",
-+ &serial_cris_ports[1]))
-+ panic("irq ser1");
-+ /* Enable the ser1 irq in global config. */
-+ intr_mask.ser1 = 1;
-+
-+ /* Port ser1 can use dma4 for tx and dma5 for rx. */
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT
-+ if (request_irq(DMA4_INTR_VECT, dma_tr_interrupt,
-+ IRQF_DISABLED, "serial 1 dma tr",
-+ &serial_cris_ports[1]))
-+ panic("irq ser1txdma");
-+ crisv32_request_dma(4, "ser1", DMA_PANIC_ON_ERROR, 0,
-+ dma_ser1);
-+ /* Enable the dma4 irq in global config. */
-+ intr_mask.dma4 = 1;
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN
-+ if (request_irq(DMA5_INTR_VECT, dma_rec_interrupt,
-+ IRQF_DISABLED, "serial 1 dma rec",
-+ &serial_cris_ports[1]))
-+ panic("irq ser1rxdma");
-+ crisv32_request_dma(5, "ser1", DMA_PANIC_ON_ERROR, 0,
-+ dma_ser1);
-+ /* Enable the dma5 irq in global config. */
-+ intr_mask.dma5 = 1;
-+#endif
-+ } else if (port->line == 2) {
-+ if (request_irq(SER2_INTR_VECT, ser_interrupt,
-+ IRQF_SHARED | IRQF_DISABLED, "ser2",
-+ &serial_cris_ports[2]))
-+ panic("irq ser2");
-+ /* Enable the ser2 irq in global config. */
-+ intr_mask.ser2 = 1;
-+
-+ /* Port ser2 can use dma2 for tx and dma3 for rx. */
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
-+ if (request_irq(DMA2_INTR_VECT, dma_tr_interrupt,
-+ IRQF_DISABLED, "serial 2 dma tr",
-+ &serial_cris_ports[2]))
-+ panic("irq ser2txdma");
-+ crisv32_request_dma(2, "ser2", DMA_PANIC_ON_ERROR, 0,
-+ dma_ser2);
-+ /* Enable the dma2 irq in global config. */
-+ intr_mask.dma2 = 1;
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
-+ if (request_irq(DMA3_INTR_VECT, dma_rec_interrupt,
-+ IRQF_DISABLED, "serial 2 dma rec",
-+ &serial_cris_ports[2]))
-+ panic("irq ser2rxdma");
-+ crisv32_request_dma(3, "ser2", DMA_PANIC_ON_ERROR, 0,
-+ dma_ser2);
-+ /* Enable the dma3 irq in global config. */
-+ intr_mask.dma3 = 1;
-+#endif
-+ } else if (port->line == 3) {
-+ if (request_irq(SER3_INTR_VECT, ser_interrupt,
-+ IRQF_SHARED | IRQF_DISABLED, "ser3",
-+ &serial_cris_ports[3]))
-+ panic("irq ser3" );
-+ /* Enable the ser3 irq in global config. */
-+ intr_mask.ser3 = 1;
-+
-+ /* Port ser3 can use dma8 for tx and dma9 for rx. */
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT
-+ if (request_irq(DMA8_INTR_VECT, dma_tr_interrupt,
-+ IRQF_DISABLED, "serial 3 dma tr",
-+ &serial_cris_ports[3]))
-+ panic("irq ser3txdma");
-+ crisv32_request_dma(8, "ser3", DMA_PANIC_ON_ERROR, 0,
-+ dma_ser3);
-+ /* Enable the dma2 irq in global config. */
-+ intr_mask.dma8 = 1;
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN
-+ if (request_irq(DMA9_INTR_VECT, dma_rec_interrupt,
-+ IRQF_DISABLED, "serial 3 dma rec",
-+ &serial_cris_ports[3]))
-+ panic("irq ser3rxdma");
-+ crisv32_request_dma(9, "ser3", DMA_PANIC_ON_ERROR, 0,
-+ dma_ser3);
-+ /* Enable the dma3 irq in global config. */
-+ intr_mask.dma9 = 1;
-+#endif
-+ }
-+
-+ /*
-+ * Reset the DMA channels and make sure their interrupts are cleared.
-+ */
-+
-+ regi_dma = up->regi_dmain;
-+ if (regi_dma) {
-+ reg_dma_rw_ack_intr ack_intr = { 0 };
-+ DMA_RESET(regi_dma);
-+ /* Wait until reset cycle is complete. */
-+ DMA_WAIT_UNTIL_RESET(regi_dma);
-+ REG_WR(dma, regi_dma, rw_cfg, cfg);
-+ /* Make sure the irqs are cleared. */
-+ ack_intr.group = 1;
-+ ack_intr.ctxt = 1;
-+ ack_intr.data = 1;
-+ ack_intr.in_eop = 1;
-+ ack_intr.stream_cmd = 1;
-+ REG_WR(dma, regi_dma, rw_ack_intr, ack_intr);
-+ }
-+ regi_dma = up->regi_dmaout;
-+ if (regi_dma) {
-+ reg_dma_rw_ack_intr ack_intr = { 0 };
-+ DMA_RESET(regi_dma);
-+ /* Wait until reset cycle is complete. */
-+ DMA_WAIT_UNTIL_RESET(regi_dma);
-+ REG_WR(dma, regi_dma, rw_cfg, cfg);
-+ /* Make sure the irqs are cleared. */
-+ ack_intr.group = 1;
-+ ack_intr.ctxt = 1;
-+ ack_intr.data = 1;
-+ ack_intr.in_eop = 1;
-+ ack_intr.stream_cmd = 1;
-+ REG_WR(dma, regi_dma, rw_ack_intr, ack_intr);
-+ }
-+
-+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
-+ REG_WR(ser, up->regi_ser, rw_intr_mask, ser_intr_mask);
-+ if (up->regi_dmain)
-+ REG_WR(dma, up->regi_dmain, rw_intr_mask, dmain_intr_mask);
-+ if (up->regi_dmaout)
-+ REG_WR(dma, up->regi_dmaout, rw_intr_mask, dmaout_intr_mask);
-+
-+ start_receive(up);
-+ start_transmitter(up);
-+
-+ serial_cris_set_mctrl(&up->port, up->port.mctrl);
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+
-+ return 0;
-+}
-+
-+static void serial_cris_shutdown(struct uart_port *port)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ unsigned long flags;
-+ reg_intr_vect_rw_mask intr_mask;
-+
-+ spin_lock_irqsave(&up->port.lock, flags);
-+
-+ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
-+ serial_cris_stop_tx(port);
-+ serial_cris_stop_rx(port);
-+
-+ if (port->line == 0) {
-+ intr_mask.ser0 = 0;
-+ free_irq(SER0_INTR_VECT, &serial_cris_ports[0]);
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT
-+ intr_mask.dma6 = 0;
-+ crisv32_free_dma(6);
-+ free_irq(DMA6_INTR_VECT, &serial_cris_ports[0]);
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN
-+ intr_mask.dma7 = 0;
-+ crisv32_free_dma(7);
-+ free_irq(DMA7_INTR_VECT, &serial_cris_ports[0]);
-+#endif
-+ } else if (port->line == 1) {
-+ intr_mask.ser1 = 0;
-+ free_irq(SER1_INTR_VECT, &serial_cris_ports[1]);
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT
-+ intr_mask.dma4 = 0;
-+ crisv32_free_dma(4);
-+ free_irq(DMA4_INTR_VECT, &serial_cris_ports[1]);
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN
-+ intr_mask.dma5 = 0;
-+ crisv32_free_dma(5);
-+ free_irq(DMA5_INTR_VECT, &serial_cris_ports[1]);
-+#endif
-+ } else if (port->line == 2) {
-+ intr_mask.ser2 = 0;
-+ free_irq(SER2_INTR_VECT, &serial_cris_ports[2]);
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT
-+ intr_mask.dma2 = 0;
-+ crisv32_free_dma(2);
-+ free_irq(DMA2_INTR_VECT, &serial_cris_ports[2]);
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN
-+ intr_mask.dma3 = 0;
-+ crisv32_free_dma(3);
-+ free_irq(DMA3_INTR_VECT, &serial_cris_ports[2]);
-+#endif
-+ } else if (port->line == 3) {
-+ intr_mask.ser3 = 0;
-+ free_irq(SER3_INTR_VECT, &serial_cris_ports[3]);
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT
-+ intr_mask.dma8 = 0;
-+ crisv32_free_dma(8);
-+ free_irq(DMA8_INTR_VECT, &serial_cris_ports[3]);
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN
-+ intr_mask.dma9 = 0;
-+ crisv32_free_dma(9);
-+ free_irq(DMA9_INTR_VECT, &serial_cris_ports[3]);
-+#endif
-+ }
-+
-+ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
-+
-+ serial_cris_set_mctrl(&up->port, up->port.mctrl);
-+
-+ if (up->regi_dmain) {
-+ struct etrax_recv_buffer *rb;
-+ struct etrax_recv_buffer *rb_next;
-+ int i;
-+ struct dma_descr_data *descr;
-+
-+ /*
-+ * In case of DMA and receive errors, there might be pending
-+ * receive buffers still linked here and not flushed upwards.
-+ * Release them.
-+ */
-+ for (rb = up->first_recv_buffer; rb != NULL; rb = rb_next) {
-+ rb_next = rb->next;
-+ kfree (rb);
-+ }
-+ up->first_recv_buffer = NULL;
-+ up->last_recv_buffer = NULL;
-+
-+ /*
-+ * Also release buffers that were attached to the DMA
-+ * before we shut down the hardware above.
-+ */
-+ for (i = 0, descr = up->rec_descr;
-+ i < SERIAL_RECV_DESCRIPTORS;
-+ i++)
-+ if (descr[i].buf) {
-+ rb = phys_to_virt((u32) descr[i].buf)
-+ - sizeof *rb;
-+ kfree(rb);
-+ descr[i].buf = NULL;
-+ }
-+ }
-+
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+
-+}
-+
-+static void
-+serial_cris_set_termios(struct uart_port *port, struct termios *termios,
-+ struct termios *old)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ unsigned long flags;
-+ reg_ser_rw_xoff xoff;
-+ reg_ser_rw_xoff_clr xoff_clr = {0};
-+ reg_ser_rw_tr_ctrl tx_ctrl = {0};
-+ reg_ser_rw_tr_dma_en tx_dma_en = {0};
-+ reg_ser_rw_rec_ctrl rx_ctrl = {0};
-+ reg_ser_rw_tr_baud_div tx_baud_div = {0};
-+ reg_ser_rw_rec_baud_div rx_baud_div = {0};
-+ reg_ser_r_stat_din rstat;
-+ int baud;
-+
-+ if (old &&
-+ termios->c_cflag == old->c_cflag &&
-+ termios->c_iflag == old->c_iflag)
-+ return;
-+
-+ /* Start with default settings and then fill in changes. */
-+
-+ /* Tx: 8 bit, no/even parity, 1 stop bit, no cts. */
-+ tx_ctrl.base_freq = regk_ser_f29_493;
-+ tx_ctrl.en = 0;
-+ tx_ctrl.stop = 0;
-+#ifdef CONFIG_ETRAX_RS485
-+ if (up->rs485.enabled && (up->port_type != TYPE_485FD)) {
-+ tx_ctrl.auto_rts = regk_ser_yes;
-+ } else
-+#endif
-+ tx_ctrl.auto_rts = regk_ser_no;
-+ tx_ctrl.txd = 1;
-+ tx_ctrl.auto_cts = 0;
-+ /* Rx: 8 bit, no/even parity. */
-+ if (up->regi_dmain) {
-+ rx_ctrl.dma_mode = 1;
-+ rx_ctrl.auto_eop = 1;
-+ }
-+ rx_ctrl.dma_err = regk_ser_stop;
-+ rx_ctrl.sampling = regk_ser_majority;
-+ rx_ctrl.timeout = 1;
-+
-+#ifdef CONFIG_ETRAX_RS485
-+ if (up->rs485.enabled && (up->port_type != TYPE_485FD)) {
-+# ifdef CONFIG_ETRAX_RS485_DISABLE_RECEIVER
-+ rx_ctrl.half_duplex = regk_ser_yes;
-+# endif
-+ rx_ctrl.rts_n = up->rs485.rts_after_sent ?
-+ regk_ser_active : regk_ser_inactive;
-+ } else if (up->port_type == TYPE_485FD) {
-+ rx_ctrl.rts_n = regk_ser_active;
-+ } else
-+#endif
-+ rx_ctrl.rts_n = regk_ser_inactive;
-+
-+ /* Common for tx and rx: 8N1. */
-+ tx_ctrl.data_bits = regk_ser_bits8;
-+ rx_ctrl.data_bits = regk_ser_bits8;
-+ tx_ctrl.par = regk_ser_even;
-+ rx_ctrl.par = regk_ser_even;
-+ tx_ctrl.par_en = regk_ser_no;
-+ rx_ctrl.par_en = regk_ser_no;
-+
-+ tx_ctrl.stop_bits = regk_ser_bits1;
-+
-+
-+ /* Change baud-rate and write it to the hardware. */
-+
-+ /* baud_clock = base_freq / (divisor*8)
-+ * divisor = base_freq / (baud_clock * 8)
-+ * base_freq is either:
-+ * off, ext, 29.493MHz, 32.000 MHz, 32.768 MHz or 100 MHz
-+ * 20.493MHz is used for standard baudrates
-+ */
-+
-+ /*
-+ * For the console port we keep the original baudrate here. Not very
-+ * beautiful.
-+ */
-+ if ((port != console_port) || old)
-+ baud = uart_get_baud_rate(port, termios, old, 0,
-+ port->uartclk / 8);
-+ else
-+ baud = console_baud;
-+
-+ tx_baud_div.div = 29493000 / (8 * baud);
-+ /* Rx uses same as tx. */
-+ rx_baud_div.div = tx_baud_div.div;
-+ rx_ctrl.base_freq = tx_ctrl.base_freq;
-+
-+ if ((termios->c_cflag & CSIZE) == CS7) {
-+ /* Set 7 bit mode. */
-+ tx_ctrl.data_bits = regk_ser_bits7;
-+ rx_ctrl.data_bits = regk_ser_bits7;
-+ }
-+
-+ if (termios->c_cflag & CSTOPB) {
-+ /* Set 2 stop bit mode. */
-+ tx_ctrl.stop_bits = regk_ser_bits2;
-+ }
-+
-+ if (termios->c_cflag & PARENB) {
-+ /* Enable parity. */
-+ tx_ctrl.par_en = regk_ser_yes;
-+ rx_ctrl.par_en = regk_ser_yes;
-+ }
-+
-+ if (termios->c_cflag & CMSPAR) {
-+ if (termios->c_cflag & PARODD) {
-+ /* Set mark parity if PARODD and CMSPAR. */
-+ tx_ctrl.par = regk_ser_mark;
-+ rx_ctrl.par = regk_ser_mark;
-+ } else {
-+ tx_ctrl.par = regk_ser_space;
-+ rx_ctrl.par = regk_ser_space;
-+ }
-+ } else {
-+ if (termios->c_cflag & PARODD) {
-+ /* Set odd parity. */
-+ tx_ctrl.par = regk_ser_odd;
-+ rx_ctrl.par = regk_ser_odd;
-+ }
-+ }
-+
-+ if (termios->c_cflag & CRTSCTS) {
-+ /* Enable automatic CTS handling. */
-+ tx_ctrl.auto_cts = regk_ser_yes;
-+ }
-+
-+ /* Make sure the tx and rx are enabled. */
-+ tx_ctrl.en = regk_ser_yes;
-+ rx_ctrl.en = regk_ser_yes;
-+
-+ /*
-+ * Wait for tr_idle in case a character is being output, so it won't
-+ * be damaged by the changes we do below. It seems the termios
-+ * changes "sometimes" (we can't see e.g. a tcsetattr TCSANOW
-+ * parameter here) should take place no matter what state. However,
-+ * in case we should wait, we may have a non-empty transmitter state
-+ * as we tell the upper layers that we're all done when we've passed
-+ * characters to the hardware, but we don't wait for them being
-+ * actually shifted out.
-+ */
-+ spin_lock_irqsave(&port->lock, flags);
-+
-+ /*
-+ * None of our interrupts re-enable DMA, so it's thankfully ok to
-+ * disable it once, outside the loop.
-+ */
-+ tx_dma_en.en = 0;
-+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en);
-+ do {
-+ /*
-+ * Make sure we have integrity between the read r_stat status
-+ * and us writing the registers below, but don't busy-wait
-+ * with interrupts off. We need to keep the port lock though
-+ * (if we go SMP), so nobody else writes characters.
-+ */
-+ local_irq_restore(flags);
-+ local_irq_save(flags);
-+ rstat = REG_RD(ser, up->regi_ser, r_stat_din);
-+ } while (!rstat.tr_idle);
-+
-+ /* Actually write the control regs (if modified) to the hardware. */
-+
-+ uart_update_timeout(port, termios->c_cflag, port->uartclk/8);
-+ MODIFY_REG(up->regi_ser, rw_rec_baud_div, rx_baud_div);
-+ MODIFY_REG(up->regi_ser, rw_rec_ctrl, rx_ctrl);
-+
-+ MODIFY_REG(up->regi_ser, rw_tr_baud_div, tx_baud_div);
-+ MODIFY_REG(up->regi_ser, rw_tr_ctrl, tx_ctrl);
-+
-+ tx_dma_en.en = up->regi_dmaout != 0;
-+ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en);
-+
-+ xoff = REG_RD(ser, up->regi_ser, rw_xoff);
-+
-+ if (up->port.info && (up->port.info->tty->termios->c_iflag & IXON)) {
-+ xoff.chr = STOP_CHAR(up->port.info->tty);
-+ xoff.automatic = regk_ser_yes;
-+ } else
-+ xoff.automatic = regk_ser_no;
-+
-+ MODIFY_REG(up->regi_ser, rw_xoff, xoff);
-+
-+ /*
-+ * Make sure we don't start in an automatically shut-off state due to
-+ * a previous early exit.
-+ */
-+ xoff_clr.clr = 1;
-+ REG_WR(ser, up->regi_ser, rw_xoff_clr, xoff_clr);
-+
-+ serial_cris_set_mctrl(&up->port, up->port.mctrl);
-+ spin_unlock_irqrestore(&up->port.lock, flags);
-+}
-+
-+static const char *
-+serial_cris_type(struct uart_port *port)
-+{
-+ return "CRISv32";
-+}
-+
-+static void serial_cris_release_port(struct uart_port *port)
-+{
-+}
-+
-+static int serial_cris_request_port(struct uart_port *port)
-+{
-+ return 0;
-+}
-+
-+static void serial_cris_config_port(struct uart_port *port, int flags)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ up->port.type = PORT_CRIS;
-+}
-+
-+#if defined(CONFIG_ETRAX_RS485)
-+
-+static void cris_set_rs485_mode(struct uart_cris_port* up) {
-+ reg_ser_rw_tr_ctrl tr_ctrl;
-+ reg_ser_rw_rec_ctrl rec_ctrl;
-+ reg_scope_instances regi_ser = up->regi_ser;
-+
-+ if (up->port_type == TYPE_485FD)
-+ /* We do not want to change anything if we are in 485FD mode */
-+ return;
-+
-+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
-+ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
-+
-+ /* Set port in RS-485 mode */
-+ if (up->rs485.enabled) {
-+ tr_ctrl.auto_rts = regk_ser_yes;
-+ rec_ctrl.rts_n = up->rs485.rts_after_sent ?
-+ regk_ser_active : regk_ser_inactive;
-+#ifdef CONFIG_ETRAX_RS485_DISABLE_RECEIVER
-+ rec_ctrl.half_duplex = regk_ser_yes;
-+#endif
-+ }
-+ /* Set port to RS-232 mode */
-+ else {
-+ rec_ctrl.rts_n = regk_ser_inactive;
-+ tr_ctrl.auto_rts = regk_ser_no;
-+ rec_ctrl.half_duplex = regk_ser_no;
-+ }
-+
-+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
-+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
-+}
-+
-+/* Enable/disable RS-485 mode on selected port. */
-+static int
-+cris_enable_rs485(struct uart_cris_port* up, struct rs485_control *r)
-+{
-+ if (up->port_type == TYPE_485FD)
-+ /* Port in 485FD mode can not chage mode */
-+ goto out;
-+
-+ up->rs485.enabled = 0x1 & r->enabled;
-+ up->rs485.rts_on_send = 0x01 & r->rts_on_send;
-+ up->rs485.rts_after_sent = 0x01 & r->rts_after_sent;
-+ up->rs485.delay_rts_before_send = r->delay_rts_before_send;
-+
-+ cris_set_rs485_mode(up);
-+ out:
-+ return 0;
-+}
-+
-+
-+/* Enable RS485 mode on port and send the data. Port will stay
-+ * in 485 mode after the data has been sent.
-+ */
-+static int
-+cris_write_rs485(struct uart_cris_port* up, const unsigned char *buf,
-+ int count)
-+{
-+ up->rs485.enabled = 1;
-+
-+ /* Set the port in RS485 mode */
-+ cris_set_rs485_mode(up);
-+
-+ /* Send the data */
-+ count = serial_cris_driver.tty_driver->write(up->port.info->tty, buf, count);
-+
-+ return count;
-+}
-+
-+#endif /* CONFIG_ETRAX_RS485 */
-+
-+static int serial_cris_ioctl(struct uart_port *port, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+
-+ switch (cmd) {
-+#if defined(CONFIG_ETRAX_RS485)
-+ case TIOCSERSETRS485: {
-+ struct rs485_control rs485ctrl;
-+ if (copy_from_user(&rs485ctrl, (struct rs485_control*) arg,
-+ sizeof(rs485ctrl)))
-+ return -EFAULT;
-+
-+ return cris_enable_rs485(up, &rs485ctrl);
-+ }
-+
-+ case TIOCSERWRRS485: {
-+ struct rs485_write rs485wr;
-+ if (copy_from_user(&rs485wr, (struct rs485_write*)arg,
-+ sizeof(rs485wr)))
-+ return -EFAULT;
-+
-+ return cris_write_rs485(up, rs485wr.outc, rs485wr.outc_size);
-+ }
-+#endif
-+ default:
-+ return -ENOIOCTLCMD;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct uart_ops serial_cris_pops = {
-+ .tx_empty = serial_cris_tx_empty,
-+ .set_mctrl = serial_cris_set_mctrl,
-+ .get_mctrl = serial_cris_get_mctrl,
-+ .stop_tx = serial_cris_stop_tx,
-+ .start_tx = serial_cris_start_tx,
-+ .send_xchar = serial_cris_send_xchar,
-+ .stop_rx = serial_cris_stop_rx,
-+ .enable_ms = serial_cris_enable_ms,
-+ .break_ctl = serial_cris_break_ctl,
-+ .startup = serial_cris_startup,
-+ .shutdown = serial_cris_shutdown,
-+ .set_termios = serial_cris_set_termios,
-+ .type = serial_cris_type,
-+ .release_port = serial_cris_release_port,
-+ .request_port = serial_cris_request_port,
-+ .config_port = serial_cris_config_port,
-+ .ioctl = serial_cris_ioctl,
-+};
-+
-+/*
-+ * It's too easy to break CONFIG_ETRAX_DEBUG_PORT_NULL and the
-+ * no-config choices by adding and moving code to before a necessary
-+ * early exit in all functions for the special case of
-+ * up->regi_ser == 0. This collection of dummy functions lets us
-+ * avoid that. Maybe there should be a generic table of dummy serial
-+ * functions?
-+ */
-+
-+static unsigned int serial_cris_tx_empty_dummy(struct uart_port *port)
-+{
-+ return TIOCSER_TEMT;
-+}
-+
-+static void serial_cris_set_mctrl_dummy(struct uart_port *port,
-+ unsigned int mctrl)
-+{
-+}
-+
-+static unsigned int serial_cris_get_mctrl_dummy(struct uart_port *port)
-+{
-+ return 0;
-+}
-+
-+static void serial_cris_stop_tx_dummy(struct uart_port *port)
-+{
-+}
-+
-+static void serial_cris_start_tx_dummy(struct uart_port *port)
-+{
-+ /* Discard outbound characters. */
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ struct circ_buf *xmit = &up->port.info->xmit;
-+ xmit->tail = xmit->head;
-+ uart_write_wakeup(port);
-+}
-+
-+#define serial_cris_stop_rx_dummy serial_cris_stop_tx_dummy
-+
-+#define serial_cris_enable_ms_dummy serial_cris_stop_tx_dummy
-+
-+static void serial_cris_break_ctl_dummy(struct uart_port *port,
-+ int break_state)
-+{
-+}
-+
-+static int serial_cris_startup_dummy(struct uart_port *port)
-+{
-+ return 0;
-+}
-+
-+#define serial_cris_shutdown_dummy serial_cris_stop_tx_dummy
-+
-+static void
-+serial_cris_set_termios_dummy(struct uart_port *port, struct termios *termios,
-+ struct termios *old)
-+{
-+}
-+
-+#define serial_cris_release_port_dummy serial_cris_stop_tx_dummy
-+#define serial_cris_request_port_dummy serial_cris_startup_dummy
-+
-+static const struct uart_ops serial_cris_dummy_pops = {
-+ /*
-+ * We *could* save one or two of those with different
-+ * signature by casting and knowledge of the ABI, but it's
-+ * just not worth the maintenance headache.
-+ * For the ones we don't define here, the default (usually meaning
-+ * "unimplemented") makes sense.
-+ */
-+ .tx_empty = serial_cris_tx_empty_dummy,
-+ .set_mctrl = serial_cris_set_mctrl_dummy,
-+ .get_mctrl = serial_cris_get_mctrl_dummy,
-+ .stop_tx = serial_cris_stop_tx_dummy,
-+ .start_tx = serial_cris_start_tx_dummy,
-+ .stop_rx = serial_cris_stop_rx_dummy,
-+ .enable_ms = serial_cris_enable_ms_dummy,
-+ .break_ctl = serial_cris_break_ctl_dummy,
-+ .startup = serial_cris_startup_dummy,
-+ .shutdown = serial_cris_shutdown_dummy,
-+ .set_termios = serial_cris_set_termios_dummy,
-+
-+ /* This one we keep the same. */
-+ .type = serial_cris_type,
-+
-+ .release_port = serial_cris_release_port_dummy,
-+ .request_port = serial_cris_request_port_dummy,
-+
-+ /*
-+ * This one we keep the same too, as long as it doesn't do
-+ * anything else but to set the type.
-+ */
-+ .config_port = serial_cris_config_port,
-+};
-+
-+static void cris_serial_port_init(struct uart_port *port, int line)
-+{
-+ struct uart_cris_port *up = (struct uart_cris_port *)port;
-+ static int first = 1;
-+
-+ if (up->initialized)
-+ return;
-+ up->initialized = 1;
-+ port->line = line;
-+ spin_lock_init(&port->lock);
-+ port->ops =
-+ up->regi_ser == 0 ? &serial_cris_dummy_pops :
-+ &serial_cris_pops;
-+ port->irq = up->irq;
-+ port->iobase = up->regi_ser ? up->regi_ser : 1;
-+ port->uartclk = 29493000;
-+
-+ /*
-+ * We can't fit any more than 255 here (unsigned char), though
-+ * actually UART_XMIT_SIZE characters could be pending output (if it
-+ * wasn't for the single test in transmit_chars_dma). At time of this
-+ * writing, the definition of "fifosize" is here the amount of
-+ * characters that can be pending output after a start_tx call until
-+ * tx_empty returns 1: see serial_core.c:uart_wait_until_sent. This
-+ * matters for timeout calculations unfortunately, but keeping larger
-+ * amounts at the DMA wouldn't win much so let's just play nice.
-+ */
-+ port->fifosize = 255;
-+ port->flags = UPF_BOOT_AUTOCONF;
-+
-+#ifdef CONFIG_ETRAX_RS485
-+ /* Set sane defaults. */
-+ up->rs485.rts_on_send = 0;
-+ up->rs485.rts_after_sent = 1;
-+ up->rs485.delay_rts_before_send = 0;
-+ if (up->port_type > TYPE_232)
-+ up->rs485.enabled = 1;
-+ else
-+ up->rs485.enabled = 0;
-+#endif
-+
-+ if (first) {
-+ first = 0;
-+#ifdef CONFIG_ETRAX_SERIAL_PORT0
-+ SETUP_PINS(0);
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT1
-+ SETUP_PINS(1);
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+ SETUP_PINS(2);
-+#endif
-+#ifdef CONFIG_ETRAX_SERIAL_PORT3
-+ SETUP_PINS(3);
-+#endif
-+ }
-+}
-+
-+static int __init serial_cris_init(void)
-+{
-+ int ret, i;
-+ reg_ser_rw_rec_ctrl rec_ctrl;
-+ printk(KERN_INFO "Serial: CRISv32 driver $Revision: 1.78 $ ");
-+
-+ ret = uart_register_driver(&serial_cris_driver);
-+ if (ret)
-+ goto out;
-+
-+ for (i = 0; i < UART_NR; i++) {
-+ if (serial_cris_ports[i].used) {
-+#ifdef CONFIG_ETRAX_RS485
-+ /* Make sure that the RTS pin stays low when allocating
-+ * pins for a port in 485 mode.
-+ */
-+ if (serial_cris_ports[i].port_type > TYPE_232) {
-+ rec_ctrl = REG_RD(ser, serial_cris_ports[i].regi_ser, rw_rec_ctrl);
-+ rec_ctrl.rts_n = regk_ser_active;
-+ REG_WR(ser, serial_cris_ports[i].regi_ser, rw_rec_ctrl, rec_ctrl);
-+ }
-+#endif
-+ switch (serial_cris_ports[i].regi_ser) {
-+ case regi_ser1:
-+ if (crisv32_pinmux_alloc_fixed(pinmux_ser1)) {
-+ printk("Failed to allocate pins for ser1, disable port\n");
-+ serial_cris_ports[i].used = 0;
-+ continue;
-+ }
-+ break;
-+ case regi_ser2:
-+ if (crisv32_pinmux_alloc_fixed(pinmux_ser2)) {
-+ printk("Failed to allocate pins for ser2, disable port\n");
-+ serial_cris_ports[i].used = 0;
-+ continue;
-+ }
-+ break;
-+ case regi_ser3:
-+ if (crisv32_pinmux_alloc_fixed(pinmux_ser3)) {
-+ printk("Failed to allocate pins for ser3, disable port\n");
-+ serial_cris_ports[i].used = 0;
-+ continue;
-+ }
-+ break;
-+ }
-+
-+ struct uart_port *port = &serial_cris_ports[i].port;
-+ cris_console.index = i;
-+ cris_serial_port_init(port, i);
-+ uart_add_one_port(&serial_cris_driver, port);
-+ }
-+ }
-+
-+out:
-+ return ret;
-+}
-+
-+static void __exit serial_cris_exit(void)
-+{
-+ int i;
-+ for (i = 0; i < UART_NR; i++)
-+ if (serial_cris_ports[i].used) {
-+ switch (serial_cris_ports[i].regi_ser) {
-+ case regi_ser1:
-+ crisv32_pinmux_dealloc_fixed(pinmux_ser1);
-+ break;
-+ case regi_ser2:
-+ crisv32_pinmux_dealloc_fixed(pinmux_ser2);
-+ break;
-+ case regi_ser3:
-+ crisv32_pinmux_dealloc_fixed(pinmux_ser3);
-+ break;
-+ }
-+ uart_remove_one_port(&serial_cris_driver,
-+ &serial_cris_ports[i].port);
-+ }
-+ uart_unregister_driver(&serial_cris_driver);
-+}
-+
-+module_init(serial_cris_init);
-+module_exit(serial_cris_exit);
---- linux-2.6.19.2.orig/drivers/usb/host/hc_crisv10.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.c 2007-02-26 20:58:29.000000000 +0100
-@@ -1,219 +1,51 @@
- /*
-- * usb-host.c: ETRAX 100LX USB Host Controller Driver (HCD)
- *
-- * Copyright (c) 2002, 2003 Axis Communications AB.
-+ * ETRAX 100LX USB Host Controller Driver
-+ *
-+ * Copyright (C) 2005, 2006 Axis Communications AB
-+ *
-+ * Author: Konrad Eriksson <konrad.eriksson@axis.se>
-+ *
- */
-
-+#include <linux/module.h>
- #include <linux/kernel.h>
--#include <linux/delay.h>
--#include <linux/ioport.h>
--#include <linux/sched.h>
--#include <linux/slab.h>
--#include <linux/errno.h>
--#include <linux/unistd.h>
--#include <linux/interrupt.h>
- #include <linux/init.h>
--#include <linux/list.h>
-+#include <linux/moduleparam.h>
- #include <linux/spinlock.h>
-+#include <linux/usb.h>
-+#include <linux/platform_device.h>
-
--#include <asm/uaccess.h>
- #include <asm/io.h>
- #include <asm/irq.h>
--#include <asm/dma.h>
--#include <asm/system.h>
--#include <asm/arch/svinto.h>
-+#include <asm/arch/dma.h>
-+#include <asm/arch/io_interface_mux.h>
-
--#include <linux/usb.h>
--/* Ugly include because we don't live with the other host drivers. */
--#include <../drivers/usb/core/hcd.h>
--#include <../drivers/usb/core/usb.h>
--
--#include "hc_crisv10.h"
-+#include "../core/hcd.h"
-+#include "../core/hub.h"
-+#include "hc-crisv10.h"
-+#include "hc-cris-dbg.h"
-+
-+
-+/***************************************************************************/
-+/***************************************************************************/
-+/* Host Controller settings */
-+/***************************************************************************/
-+/***************************************************************************/
-+
-+#define VERSION "1.00"
-+#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB"
-+#define DESCRIPTION "ETRAX 100LX USB Host Controller"
-
- #define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR
- #define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR
- #define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR
-
--static const char *usb_hcd_version = "$Revision: 1.2 $";
--
--#undef KERN_DEBUG
--#define KERN_DEBUG ""
--
--
--#undef USB_DEBUG_RH
--#undef USB_DEBUG_EPID
--#undef USB_DEBUG_SB
--#undef USB_DEBUG_DESC
--#undef USB_DEBUG_URB
--#undef USB_DEBUG_TRACE
--#undef USB_DEBUG_BULK
--#undef USB_DEBUG_CTRL
--#undef USB_DEBUG_INTR
--#undef USB_DEBUG_ISOC
--
--#ifdef USB_DEBUG_RH
--#define dbg_rh(format, arg...) printk(KERN_DEBUG __FILE__ ": (RH) " format "\n" , ## arg)
--#else
--#define dbg_rh(format, arg...) do {} while (0)
--#endif
--
--#ifdef USB_DEBUG_EPID
--#define dbg_epid(format, arg...) printk(KERN_DEBUG __FILE__ ": (EPID) " format "\n" , ## arg)
--#else
--#define dbg_epid(format, arg...) do {} while (0)
--#endif
--
--#ifdef USB_DEBUG_SB
--#define dbg_sb(format, arg...) printk(KERN_DEBUG __FILE__ ": (SB) " format "\n" , ## arg)
--#else
--#define dbg_sb(format, arg...) do {} while (0)
--#endif
--
--#ifdef USB_DEBUG_CTRL
--#define dbg_ctrl(format, arg...) printk(KERN_DEBUG __FILE__ ": (CTRL) " format "\n" , ## arg)
--#else
--#define dbg_ctrl(format, arg...) do {} while (0)
--#endif
--
--#ifdef USB_DEBUG_BULK
--#define dbg_bulk(format, arg...) printk(KERN_DEBUG __FILE__ ": (BULK) " format "\n" , ## arg)
--#else
--#define dbg_bulk(format, arg...) do {} while (0)
--#endif
--
--#ifdef USB_DEBUG_INTR
--#define dbg_intr(format, arg...) printk(KERN_DEBUG __FILE__ ": (INTR) " format "\n" , ## arg)
--#else
--#define dbg_intr(format, arg...) do {} while (0)
--#endif
--
--#ifdef USB_DEBUG_ISOC
--#define dbg_isoc(format, arg...) printk(KERN_DEBUG __FILE__ ": (ISOC) " format "\n" , ## arg)
--#else
--#define dbg_isoc(format, arg...) do {} while (0)
--#endif
--
--#ifdef USB_DEBUG_TRACE
--#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__))
--#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__))
--#else
--#define DBFENTER do {} while (0)
--#define DBFEXIT do {} while (0)
--#endif
--
--#define usb_pipeslow(pipe) (((pipe) >> 26) & 1)
--
--/*-------------------------------------------------------------------
-- Virtual Root Hub
-- -------------------------------------------------------------------*/
--
--static __u8 root_hub_dev_des[] =
--{
-- 0x12, /* __u8 bLength; */
-- 0x01, /* __u8 bDescriptorType; Device */
-- 0x00, /* __le16 bcdUSB; v1.0 */
-- 0x01,
-- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
-- 0x00, /* __u8 bDeviceSubClass; */
-- 0x00, /* __u8 bDeviceProtocol; */
-- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
-- 0x00, /* __le16 idVendor; */
-- 0x00,
-- 0x00, /* __le16 idProduct; */
-- 0x00,
-- 0x00, /* __le16 bcdDevice; */
-- 0x00,
-- 0x00, /* __u8 iManufacturer; */
-- 0x02, /* __u8 iProduct; */
-- 0x01, /* __u8 iSerialNumber; */
-- 0x01 /* __u8 bNumConfigurations; */
--};
--
--/* Configuration descriptor */
--static __u8 root_hub_config_des[] =
--{
-- 0x09, /* __u8 bLength; */
-- 0x02, /* __u8 bDescriptorType; Configuration */
-- 0x19, /* __le16 wTotalLength; */
-- 0x00,
-- 0x01, /* __u8 bNumInterfaces; */
-- 0x01, /* __u8 bConfigurationValue; */
-- 0x00, /* __u8 iConfiguration; */
-- 0x40, /* __u8 bmAttributes; Bit 7: Bus-powered */
-- 0x00, /* __u8 MaxPower; */
--
-- /* interface */
-- 0x09, /* __u8 if_bLength; */
-- 0x04, /* __u8 if_bDescriptorType; Interface */
-- 0x00, /* __u8 if_bInterfaceNumber; */
-- 0x00, /* __u8 if_bAlternateSetting; */
-- 0x01, /* __u8 if_bNumEndpoints; */
-- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
-- 0x00, /* __u8 if_bInterfaceSubClass; */
-- 0x00, /* __u8 if_bInterfaceProtocol; */
-- 0x00, /* __u8 if_iInterface; */
--
-- /* endpoint */
-- 0x07, /* __u8 ep_bLength; */
-- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
-- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
-- 0x03, /* __u8 ep_bmAttributes; Interrupt */
-- 0x08, /* __le16 ep_wMaxPacketSize; 8 Bytes */
-- 0x00,
-- 0xff /* __u8 ep_bInterval; 255 ms */
--};
--
--static __u8 root_hub_hub_des[] =
--{
-- 0x09, /* __u8 bLength; */
-- 0x29, /* __u8 bDescriptorType; Hub-descriptor */
-- 0x02, /* __u8 bNbrPorts; */
-- 0x00, /* __u16 wHubCharacteristics; */
-- 0x00,
-- 0x01, /* __u8 bPwrOn2pwrGood; 2ms */
-- 0x00, /* __u8 bHubContrCurrent; 0 mA */
-- 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */
-- 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */
--};
--
--static DEFINE_TIMER(bulk_start_timer, NULL, 0, 0);
--static DEFINE_TIMER(bulk_eot_timer, NULL, 0, 0);
--
--/* We want the start timer to expire before the eot timer, because the former might start
-- traffic, thus making it unnecessary for the latter to time out. */
--#define BULK_START_TIMER_INTERVAL (HZ/10) /* 100 ms */
--#define BULK_EOT_TIMER_INTERVAL (HZ/10+2) /* 120 ms */
--
--#define OK(x) len = (x); dbg_rh("OK(%d): line: %d", x, __LINE__); break
--#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \
--{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);}
--
--#define SLAB_FLAG (in_interrupt() ? SLAB_ATOMIC : SLAB_KERNEL)
--#define KMALLOC_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL)
--
--/* Most helpful debugging aid */
--#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__))))
--
--/* Alternative assert define which stops after a failed assert. */
--/*
--#define assert(expr) \
--{ \
-- if (!(expr)) { \
-- err("assert failed at line %d",__LINE__); \
-- while (1); \
-- } \
--}
--*/
--
-+/* Number of physical ports in Etrax 100LX */
-+#define USB_ROOT_HUB_PORTS 2
-
--/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it dynamically?
-- To adjust it dynamically we would have to get an interrupt when we reach the end
-- of the rx descriptor list, or when we get close to the end, and then allocate more
-- descriptors. */
--
--#define NBR_OF_RX_DESC 512
--#define RX_DESC_BUF_SIZE 1024
--#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE)
-+const char hc_name[] = "hc-crisv10";
-+const char product_desc[] = DESCRIPTION;
-
- /* The number of epids is, among other things, used for pre-allocating
- ctrl, bulk and isoc EP descriptors (one for each epid).
-@@ -221,4332 +53,4632 @@
- #define NBR_OF_EPIDS 32
-
- /* Support interrupt traffic intervals up to 128 ms. */
--#define MAX_INTR_INTERVAL 128
-+#define MAX_INTR_INTERVAL 128
-
--/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP table
-- must be "invalid". By this we mean that we shouldn't care about epid attentions
-- for this epid, or at least handle them differently from epid attentions for "valid"
-- epids. This define determines which one to use (don't change it). */
--#define INVALID_EPID 31
-+/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP
-+ table must be "invalid". By this we mean that we shouldn't care about epid
-+ attentions for this epid, or at least handle them differently from epid
-+ attentions for "valid" epids. This define determines which one to use
-+ (don't change it). */
-+#define INVALID_EPID 31
- /* A special epid for the bulk dummys. */
--#define DUMMY_EPID 30
--
--/* This is just a software cache for the valid entries in R_USB_EPT_DATA. */
--static __u32 epid_usage_bitmask;
--
--/* A bitfield to keep information on in/out traffic is needed to uniquely identify
-- an endpoint on a device, since the most significant bit which indicates traffic
-- direction is lacking in the ep_id field (ETRAX epids can handle both in and
-- out traffic on endpoints that are otherwise identical). The USB framework, however,
-- relies on them to be handled separately. For example, bulk IN and OUT urbs cannot
-- be queued in the same list, since they would block each other. */
--static __u32 epid_out_traffic;
--
--/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line.
-- Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be cache aligned. */
--static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32)));
--static volatile USB_IN_Desc_t RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4)));
--
--/* Pointers into RxDescList. */
--static volatile USB_IN_Desc_t *myNextRxDesc;
--static volatile USB_IN_Desc_t *myLastRxDesc;
--static volatile USB_IN_Desc_t *myPrevRxDesc;
--
--/* EP descriptors must be 32-bit aligned. */
--static volatile USB_EP_Desc_t TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
--static volatile USB_EP_Desc_t TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
--/* After each enabled bulk EP (IN or OUT) we put two disabled EP descriptors with the eol flag set,
-- causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which
-- gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the
-- EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors
-- in each frame. */
--static volatile USB_EP_Desc_t TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4)));
--
--static volatile USB_EP_Desc_t TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
--static volatile USB_SB_Desc_t TxIsocSB_zout __attribute__ ((aligned (4)));
--
--static volatile USB_EP_Desc_t TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4)));
--static volatile USB_SB_Desc_t TxIntrSB_zout __attribute__ ((aligned (4)));
--
--/* A zout transfer makes a memory access at the address of its buf pointer, which means that setting
-- this buf pointer to 0 will cause an access to the flash. In addition to this, setting sw_len to 0
-- results in a 16/32 bytes (depending on DMA burst size) transfer. Instead, we set it to 1, and point
-- it to this buffer. */
--static int zout_buffer[4] __attribute__ ((aligned (4)));
-+#define DUMMY_EPID 30
-
--/* Cache for allocating new EP and SB descriptors. */
--static kmem_cache_t *usb_desc_cache;
-+/* Module settings */
-
--/* Cache for the registers allocated in the top half. */
--static kmem_cache_t *top_half_reg_cache;
-+MODULE_DESCRIPTION(DESCRIPTION);
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Konrad Eriksson <konrad.eriksson@axis.se>");
-
--/* Cache for the data allocated in the isoc descr top half. */
--static kmem_cache_t *isoc_compl_cache;
-
--static struct usb_bus *etrax_usb_bus;
-+/* Module parameters */
-
--/* This is a circular (double-linked) list of the active urbs for each epid.
-- The head is never removed, and new urbs are linked onto the list as
-- urb_entry_t elements. Don't reference urb_list directly; use the wrapper
-- functions instead. Note that working with these lists might require spinlock
-- protection. */
--static struct list_head urb_list[NBR_OF_EPIDS];
-+/* 0 = No ports enabled
-+ 1 = Only port 1 enabled (on board ethernet on devboard)
-+ 2 = Only port 2 enabled (external connector on devboard)
-+ 3 = Both ports enabled
-+*/
-+static unsigned int ports = 3;
-+module_param(ports, uint, S_IRUGO);
-+MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use");
-
--/* Read about the need and usage of this lock in submit_ctrl_urb. */
--static spinlock_t urb_list_lock;
-
--/* Used when unlinking asynchronously. */
--static struct list_head urb_unlink_list;
-+/***************************************************************************/
-+/***************************************************************************/
-+/* Shared global variables for this module */
-+/***************************************************************************/
-+/***************************************************************************/
-
--/* for returning string descriptors in UTF-16LE */
--static int ascii2utf (char *ascii, __u8 *utf, int utfmax)
--{
-- int retval;
-+/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */
-+static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-
-- for (retval = 0; *ascii && utfmax > 1; utfmax -= 2, retval += 2) {
-- *utf++ = *ascii++ & 0x7f;
-- *utf++ = 0;
-- }
-- return retval;
--}
-+static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-
--static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
--{
-- char buf [30];
-+/* EP descriptor lists for period transfers. Must be 32-bit aligned. */
-+static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4)));
-+static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4)));
-
-- // assert (len > (2 * (sizeof (buf) + 1)));
-- // assert (strlen (type) <= 8);
-+static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-+static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4)));
-
-- // language ids
-- if (id == 0) {
-- *data++ = 4; *data++ = 3; /* 4 bytes data */
-- *data++ = 0; *data++ = 0; /* some language id */
-- return 4;
--
-- // serial number
-- } else if (id == 1) {
-- sprintf (buf, "%x", serial);
--
-- // product description
-- } else if (id == 2) {
-- sprintf (buf, "USB %s Root Hub", type);
--
-- // id 3 == vendor description
--
-- // unsupported IDs --> "stall"
-- } else
-- return 0;
--
-- data [0] = 2 + ascii2utf (buf, data + 2, len - 2);
-- data [1] = 3;
-- return data [0];
--}
-+static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-
--/* Wrappers around the list functions (include/linux/list.h). */
-+/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set,
-+ causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which
-+ gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the
-+ EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors
-+ in each frame. */
-+static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4)));
-
--static inline int urb_list_empty(int epid)
-+/* List of URB pointers, where each points to the active URB for a epid.
-+ For Bulk, Ctrl and Intr this means which URB that currently is added to
-+ DMA lists (Isoc URBs are all directly added to DMA lists). As soon as
-+ URB has completed is the queue examined and the first URB in queue is
-+ removed and moved to the activeUrbList while its state change to STARTED and
-+ its transfer(s) gets added to DMA list (exception Isoc where URBs enter
-+ state STARTED directly and added transfers added to DMA lists). */
-+static struct urb *activeUrbList[NBR_OF_EPIDS];
-+
-+/* Additional software state info for each epid */
-+static struct etrax_epid epid_state[NBR_OF_EPIDS];
-+
-+/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops
-+ even if there is new data waiting to be processed */
-+static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0);
-+static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0);
-+
-+/* We want the start timer to expire before the eot timer, because the former
-+ might start traffic, thus making it unnecessary for the latter to time
-+ out. */
-+#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */
-+#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */
-+
-+/* Delay before a URB completion happen when it's scheduled to be delayed */
-+#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */
-+
-+/* Simplifying macros for checking software state info of a epid */
-+/* ----------------------------------------------------------------------- */
-+#define epid_inuse(epid) epid_state[epid].inuse
-+#define epid_out_traffic(epid) epid_state[epid].out_traffic
-+#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0)
-+#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0)
-+
-+
-+/***************************************************************************/
-+/***************************************************************************/
-+/* DEBUG FUNCTIONS */
-+/***************************************************************************/
-+/***************************************************************************/
-+/* Note that these functions are always available in their "__" variants,
-+ for use in error situations. The "__" missing variants are controlled by
-+ the USB_DEBUG_DESC/USB_DEBUG_URB macros. */
-+static void __dump_urb(struct urb* purb)
- {
-- return list_empty(&urb_list[epid]);
-+ struct crisv10_urb_priv *urb_priv = purb->hcpriv;
-+ int urb_num = -1;
-+ if(urb_priv) {
-+ urb_num = urb_priv->urb_num;
-+ }
-+ printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num);
-+ printk("dev :0x%08lx\n", (unsigned long)purb->dev);
-+ printk("pipe :0x%08x\n", purb->pipe);
-+ printk("status :%d\n", purb->status);
-+ printk("transfer_flags :0x%08x\n", purb->transfer_flags);
-+ printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer);
-+ printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length);
-+ printk("actual_length :%d\n", purb->actual_length);
-+ printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet);
-+ printk("start_frame :%d\n", purb->start_frame);
-+ printk("number_of_packets :%d\n", purb->number_of_packets);
-+ printk("interval :%d\n", purb->interval);
-+ printk("error_count :%d\n", purb->error_count);
-+ printk("context :0x%08lx\n", (unsigned long)purb->context);
-+ printk("complete :0x%08lx\n\n", (unsigned long)purb->complete);
-+}
-+
-+static void __dump_in_desc(volatile struct USB_IN_Desc *in)
-+{
-+ printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in);
-+ printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len);
-+ printk(" command : 0x%04x\n", in->command);
-+ printk(" next : 0x%08lx\n", in->next);
-+ printk(" buf : 0x%08lx\n", in->buf);
-+ printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len);
-+ printk(" status : 0x%04x\n\n", in->status);
-+}
-+
-+static void __dump_sb_desc(volatile struct USB_SB_Desc *sb)
-+{
-+ char tt = (sb->command & 0x30) >> 4;
-+ char *tt_string;
-+
-+ switch (tt) {
-+ case 0:
-+ tt_string = "zout";
-+ break;
-+ case 1:
-+ tt_string = "in";
-+ break;
-+ case 2:
-+ tt_string = "out";
-+ break;
-+ case 3:
-+ tt_string = "setup";
-+ break;
-+ default:
-+ tt_string = "unknown (weird)";
-+ }
-+
-+ printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb);
-+ printk(" command:0x%04x (", sb->command);
-+ printk("rem:%d ", (sb->command & 0x3f00) >> 8);
-+ printk("full:%d ", (sb->command & 0x40) >> 6);
-+ printk("tt:%d(%s) ", tt, tt_string);
-+ printk("intr:%d ", (sb->command & 0x8) >> 3);
-+ printk("eot:%d ", (sb->command & 0x2) >> 1);
-+ printk("eol:%d)", sb->command & 0x1);
-+ printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len);
-+ printk(" next:0x%08lx", sb->next);
-+ printk(" buf:0x%08lx\n", sb->buf);
-+}
-+
-+
-+static void __dump_ep_desc(volatile struct USB_EP_Desc *ep)
-+{
-+ printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep);
-+ printk(" command:0x%04x (", ep->command);
-+ printk("ep_id:%d ", (ep->command & 0x1f00) >> 8);
-+ printk("enable:%d ", (ep->command & 0x10) >> 4);
-+ printk("intr:%d ", (ep->command & 0x8) >> 3);
-+ printk("eof:%d ", (ep->command & 0x2) >> 1);
-+ printk("eol:%d)", ep->command & 0x1);
-+ printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len);
-+ printk(" next:0x%08lx", ep->next);
-+ printk(" sub:0x%08lx\n", ep->sub);
- }
-
--/* Returns first urb for this epid, or NULL if list is empty. */
--static inline struct urb *urb_list_first(int epid)
-+static inline void __dump_ep_list(int pipe_type)
- {
-- struct urb *first_urb = 0;
-+ volatile struct USB_EP_Desc *ep;
-+ volatile struct USB_EP_Desc *first_ep;
-+ volatile struct USB_SB_Desc *sb;
-+
-+ switch (pipe_type)
-+ {
-+ case PIPE_BULK:
-+ first_ep = &TxBulkEPList[0];
-+ break;
-+ case PIPE_CONTROL:
-+ first_ep = &TxCtrlEPList[0];
-+ break;
-+ case PIPE_INTERRUPT:
-+ first_ep = &TxIntrEPList[0];
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ first_ep = &TxIsocEPList[0];
-+ break;
-+ default:
-+ warn("Cannot dump unknown traffic type");
-+ return;
-+ }
-+ ep = first_ep;
-+
-+ printk("\n\nDumping EP list...\n\n");
-+
-+ do {
-+ __dump_ep_desc(ep);
-+ /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */
-+ sb = ep->sub ? phys_to_virt(ep->sub) : 0;
-+ while (sb) {
-+ __dump_sb_desc(sb);
-+ sb = sb->next ? phys_to_virt(sb->next) : 0;
-+ }
-+ ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next));
-
-- if (!urb_list_empty(epid)) {
-- /* Get the first urb (i.e. head->next). */
-- urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list);
-- first_urb = urb_entry->urb;
-- }
-- return first_urb;
-+ } while (ep != first_ep);
- }
-
--/* Adds an urb_entry last in the list for this epid. */
--static inline void urb_list_add(struct urb *urb, int epid)
-+static inline void __dump_ept_data(int epid)
- {
-- urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG);
-- assert(urb_entry);
-+ unsigned long flags;
-+ __u32 r_usb_ept_data;
-
-- urb_entry->urb = urb;
-- list_add_tail(&urb_entry->list, &urb_list[epid]);
-+ if (epid < 0 || epid > 31) {
-+ printk("Cannot dump ept data for invalid epid %d\n", epid);
-+ return;
-+ }
-+
-+ local_irq_save(flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-+ nop();
-+ r_usb_ept_data = *R_USB_EPT_DATA;
-+ local_irq_restore(flags);
-+
-+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid);
-+ if (r_usb_ept_data == 0) {
-+ /* No need for more detailed printing. */
-+ return;
-+ }
-+ printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31);
-+ printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30);
-+ printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28);
-+ printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27);
-+ printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26);
-+ printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24);
-+ printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22);
-+ printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21);
-+ printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19);
-+ printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11);
-+ printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7);
-+ printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f));
-+}
-+
-+static inline void __dump_ept_data_iso(int epid)
-+{
-+ unsigned long flags;
-+ __u32 ept_data;
-+
-+ if (epid < 0 || epid > 31) {
-+ printk("Cannot dump ept data for invalid epid %d\n", epid);
-+ return;
-+ }
-+
-+ local_irq_save(flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-+ nop();
-+ ept_data = *R_USB_EPT_DATA_ISO;
-+ local_irq_restore(flags);
-+
-+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid);
-+ if (ept_data == 0) {
-+ /* No need for more detailed printing. */
-+ return;
-+ }
-+ printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid,
-+ ept_data));
-+ printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port,
-+ ept_data));
-+ printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code,
-+ ept_data));
-+ printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len,
-+ ept_data));
-+ printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep,
-+ ept_data));
-+ printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev,
-+ ept_data));
- }
-
--/* Search through the list for an element that contains this urb. (The list
-- is expected to be short and the one we are about to delete will often be
-- the first in the list.) */
--static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid)
-+static inline void __dump_ept_data_list(void)
- {
-- struct list_head *entry;
-- struct list_head *tmp;
-- urb_entry_t *urb_entry;
--
-- list_for_each_safe(entry, tmp, &urb_list[epid]) {
-- urb_entry = list_entry(entry, urb_entry_t, list);
-- assert(urb_entry);
-- assert(urb_entry->urb);
--
-- if (urb_entry->urb == urb) {
-- return urb_entry;
-- }
-- }
-- return 0;
--}
-+ int i;
-
--/* Delete an urb from the list. */
--static inline void urb_list_del(struct urb *urb, int epid)
--{
-- urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
-- assert(urb_entry);
-+ printk("Dumping the whole R_USB_EPT_DATA list\n");
-
-- /* Delete entry and free. */
-- list_del(&urb_entry->list);
-- kfree(urb_entry);
-+ for (i = 0; i < 32; i++) {
-+ __dump_ept_data(i);
-+ }
-+}
-+
-+static void debug_epid(int epid) {
-+ int i;
-+
-+ if(epid_isoc(epid)) {
-+ __dump_ept_data_iso(epid);
-+ } else {
-+ __dump_ept_data(epid);
-+ }
-+
-+ printk("Bulk:\n");
-+ for(i = 0; i < 32; i++) {
-+ if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) ==
-+ epid) {
-+ printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i]));
-+ }
-+ }
-+
-+ printk("Ctrl:\n");
-+ for(i = 0; i < 32; i++) {
-+ if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) ==
-+ epid) {
-+ printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i]));
-+ }
-+ }
-+
-+ printk("Intr:\n");
-+ for(i = 0; i < MAX_INTR_INTERVAL; i++) {
-+ if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) ==
-+ epid) {
-+ printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i]));
-+ }
-+ }
-+
-+ printk("Isoc:\n");
-+ for(i = 0; i < 32; i++) {
-+ if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) ==
-+ epid) {
-+ printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i]));
-+ }
-+ }
-+
-+ __dump_ept_data_list();
-+ __dump_ep_list(PIPE_INTERRUPT);
-+ printk("\n\n");
-+}
-+
-+
-+
-+char* hcd_status_to_str(__u8 bUsbStatus) {
-+ static char hcd_status_str[128];
-+ hcd_status_str[0] = '\0';
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) {
-+ strcat(hcd_status_str, "ourun ");
-+ }
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) {
-+ strcat(hcd_status_str, "perror ");
-+ }
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) {
-+ strcat(hcd_status_str, "device_mode ");
-+ }
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) {
-+ strcat(hcd_status_str, "host_mode ");
-+ }
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) {
-+ strcat(hcd_status_str, "started ");
-+ }
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) {
-+ strcat(hcd_status_str, "running ");
-+ }
-+ return hcd_status_str;
-+}
-+
-+
-+char* sblist_to_str(struct USB_SB_Desc* sb_desc) {
-+ static char sblist_to_str_buff[128];
-+ char tmp[32], tmp2[32];
-+ sblist_to_str_buff[0] = '\0';
-+ while(sb_desc != NULL) {
-+ switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) {
-+ case 0: sprintf(tmp, "zout"); break;
-+ case 1: sprintf(tmp, "in"); break;
-+ case 2: sprintf(tmp, "out"); break;
-+ case 3: sprintf(tmp, "setup"); break;
-+ }
-+ sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len);
-+ strcat(sblist_to_str_buff, tmp2);
-+ if(sb_desc->next != 0) {
-+ sb_desc = phys_to_virt(sb_desc->next);
-+ } else {
-+ sb_desc = NULL;
-+ }
-+ }
-+ return sblist_to_str_buff;
-+}
-+
-+char* port_status_to_str(__u16 wPortStatus) {
-+ static char port_status_str[128];
-+ port_status_str[0] = '\0';
-+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) {
-+ strcat(port_status_str, "connected ");
-+ }
-+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) {
-+ strcat(port_status_str, "enabled ");
-+ }
-+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) {
-+ strcat(port_status_str, "suspended ");
-+ }
-+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) {
-+ strcat(port_status_str, "reset ");
-+ }
-+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) {
-+ strcat(port_status_str, "full-speed ");
-+ } else {
-+ strcat(port_status_str, "low-speed ");
-+ }
-+ return port_status_str;
-+}
-+
-+
-+char* endpoint_to_str(struct usb_endpoint_descriptor *ed) {
-+ static char endpoint_to_str_buff[128];
-+ char tmp[32];
-+ int epnum = ed->bEndpointAddress & 0x0F;
-+ int dir = ed->bEndpointAddress & 0x80;
-+ int type = ed->bmAttributes & 0x03;
-+ endpoint_to_str_buff[0] = '\0';
-+ sprintf(endpoint_to_str_buff, "ep:%d ", epnum);
-+ switch(type) {
-+ case 0:
-+ sprintf(tmp, " ctrl");
-+ break;
-+ case 1:
-+ sprintf(tmp, " isoc");
-+ break;
-+ case 2:
-+ sprintf(tmp, " bulk");
-+ break;
-+ case 3:
-+ sprintf(tmp, " intr");
-+ break;
-+ }
-+ strcat(endpoint_to_str_buff, tmp);
-+ if(dir) {
-+ sprintf(tmp, " in");
-+ } else {
-+ sprintf(tmp, " out");
-+ }
-+ strcat(endpoint_to_str_buff, tmp);
-+
-+ return endpoint_to_str_buff;
-+}
-+
-+/* Debug helper functions for Transfer Controller */
-+char* pipe_to_str(unsigned int pipe) {
-+ static char pipe_to_str_buff[128];
-+ char tmp[64];
-+ sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe));
-+ sprintf(tmp, " type:%s", str_type(pipe));
-+ strcat(pipe_to_str_buff, tmp);
-+
-+ sprintf(tmp, " dev:%d", usb_pipedevice(pipe));
-+ strcat(pipe_to_str_buff, tmp);
-+ sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe));
-+ strcat(pipe_to_str_buff, tmp);
-+ return pipe_to_str_buff;
- }
-
--/* Move an urb to the end of the list. */
--static inline void urb_list_move_last(struct urb *urb, int epid)
--{
-- urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
-- assert(urb_entry);
--
-- list_move_tail(&urb_entry->list, &urb_list[epid]);
--}
-
--/* Get the next urb in the list. */
--static inline struct urb *urb_list_next(struct urb *urb, int epid)
--{
-- urb_entry_t *urb_entry = __urb_list_entry(urb, epid);
-+#define USB_DEBUG_DESC 1
-
-- assert(urb_entry);
-+#ifdef USB_DEBUG_DESC
-+#define dump_in_desc(x) __dump_in_desc(x)
-+#define dump_sb_desc(...) __dump_sb_desc(...)
-+#define dump_ep_desc(x) __dump_ep_desc(x)
-+#define dump_ept_data(x) __dump_ept_data(x)
-+#else
-+#define dump_in_desc(...) do {} while (0)
-+#define dump_sb_desc(...) do {} while (0)
-+#define dump_ep_desc(...) do {} while (0)
-+#endif
-
-- if (urb_entry->list.next != &urb_list[epid]) {
-- struct list_head *elem = urb_entry->list.next;
-- urb_entry = list_entry(elem, urb_entry_t, list);
-- return urb_entry->urb;
-- } else {
-- return NULL;
-- }
--}
-
-+/* Uncomment this to enable massive function call trace
-+ #define USB_DEBUG_TRACE */
-
-+#ifdef USB_DEBUG_TRACE
-+#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__))
-+#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__))
-+#else
-+#define DBFENTER do {} while (0)
-+#define DBFEXIT do {} while (0)
-+#endif
-
--/* For debug purposes only. */
--static inline void urb_list_dump(int epid)
--{
-- struct list_head *entry;
-- struct list_head *tmp;
-- urb_entry_t *urb_entry;
-- int i = 0;
--
-- info("Dumping urb list for epid %d", epid);
--
-- list_for_each_safe(entry, tmp, &urb_list[epid]) {
-- urb_entry = list_entry(entry, urb_entry_t, list);
-- info(" entry %d, urb = 0x%lx", i, (unsigned long)urb_entry->urb);
-- }
--}
-+#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \
-+{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);}
-
--static void init_rx_buffers(void);
--static int etrax_rh_unlink_urb(struct urb *urb);
--static void etrax_rh_send_irq(struct urb *urb);
--static void etrax_rh_init_int_timer(struct urb *urb);
--static void etrax_rh_int_timer_do(unsigned long ptr);
--
--static int etrax_usb_setup_epid(struct urb *urb);
--static int etrax_usb_lookup_epid(struct urb *urb);
--static int etrax_usb_allocate_epid(void);
--static void etrax_usb_free_epid(int epid);
--
--static int etrax_remove_from_sb_list(struct urb *urb);
--
--static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size,
-- unsigned mem_flags, dma_addr_t *dma);
--static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma);
--
--static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid);
--static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid);
--static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid);
--static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid);
--
--static int etrax_usb_submit_bulk_urb(struct urb *urb);
--static int etrax_usb_submit_ctrl_urb(struct urb *urb);
--static int etrax_usb_submit_intr_urb(struct urb *urb);
--static int etrax_usb_submit_isoc_urb(struct urb *urb);
--
--static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags);
--static int etrax_usb_unlink_urb(struct urb *urb, int status);
--static int etrax_usb_get_frame_number(struct usb_device *usb_dev);
--
--static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc);
--static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc);
--static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc);
--static void etrax_usb_hc_interrupt_bottom_half(void *data);
--
--static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data);
--
--
--/* The following is a list of interrupt handlers for the host controller interrupts we use.
-- They are called from etrax_usb_hc_interrupt_bottom_half. */
--static void etrax_usb_hc_isoc_eof_interrupt(void);
--static void etrax_usb_hc_bulk_eot_interrupt(int timer_induced);
--static void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg);
--static void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg);
--static void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg);
--
--static int etrax_rh_submit_urb (struct urb *urb);
--
--/* Forward declaration needed because they are used in the rx interrupt routine. */
--static void etrax_usb_complete_urb(struct urb *urb, int status);
--static void etrax_usb_complete_bulk_urb(struct urb *urb, int status);
--static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status);
--static void etrax_usb_complete_intr_urb(struct urb *urb, int status);
--static void etrax_usb_complete_isoc_urb(struct urb *urb, int status);
-+/* Most helpful debugging aid */
-+#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__))))
-
--static int etrax_usb_hc_init(void);
--static void etrax_usb_hc_cleanup(void);
-
--static struct usb_operations etrax_usb_device_operations =
--{
-- .get_frame_number = etrax_usb_get_frame_number,
-- .submit_urb = etrax_usb_submit_urb,
-- .unlink_urb = etrax_usb_unlink_urb,
-- .buffer_alloc = etrax_usb_buffer_alloc,
-- .buffer_free = etrax_usb_buffer_free
--};
-+/***************************************************************************/
-+/***************************************************************************/
-+/* Forward declarations */
-+/***************************************************************************/
-+/***************************************************************************/
-+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg);
-+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg);
-+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg);
-+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg);
-+
-+void rh_port_status_change(__u16[]);
-+int rh_clear_port_feature(__u8, __u16);
-+int rh_set_port_feature(__u8, __u16);
-+static void rh_disable_port(unsigned int port);
-+
-+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd,
-+ int timer);
-+
-+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb,
-+ int mem_flags);
-+static void tc_free_epid(struct usb_host_endpoint *ep);
-+static int tc_allocate_epid(void);
-+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status);
-+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb,
-+ int status);
-+
-+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid,
-+ int mem_flags);
-+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb);
-+
-+static inline struct urb *urb_list_first(int epid);
-+static inline void urb_list_add(struct urb *urb, int epid,
-+ int mem_flags);
-+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid);
-+static inline void urb_list_del(struct urb *urb, int epid);
-+static inline void urb_list_move_last(struct urb *urb, int epid);
-+static inline struct urb *urb_list_next(struct urb *urb, int epid);
-+
-+int create_sb_for_urb(struct urb *urb, int mem_flags);
-+int init_intr_urb(struct urb *urb, int mem_flags);
-+
-+static inline void etrax_epid_set(__u8 index, __u32 data);
-+static inline void etrax_epid_clear_error(__u8 index);
-+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout,
-+ __u8 toggle);
-+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout);
-+static inline __u32 etrax_epid_get(__u8 index);
-+
-+/* We're accessing the same register position in Etrax so
-+ when we do full access the internal difference doesn't matter */
-+#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data)
-+#define etrax_epid_iso_get(index) etrax_epid_get(index)
-+
-+
-+static void tc_dma_process_isoc_urb(struct urb *urb);
-+static void tc_dma_process_queue(int epid);
-+static void tc_dma_unlink_intr_urb(struct urb *urb);
-+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc);
-+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc);
-+
-+static void tc_bulk_start_timer_func(unsigned long dummy);
-+static void tc_bulk_eot_timer_func(unsigned long dummy);
-+
-+
-+/*************************************************************/
-+/*************************************************************/
-+/* Host Controler Driver block */
-+/*************************************************************/
-+/*************************************************************/
-+
-+/* HCD operations */
-+static irqreturn_t crisv10_hcd_top_irq(int irq, void*);
-+static int crisv10_hcd_reset(struct usb_hcd *);
-+static int crisv10_hcd_start(struct usb_hcd *);
-+static void crisv10_hcd_stop(struct usb_hcd *);
-+#ifdef CONFIG_PM
-+static int crisv10_hcd_suspend(struct device *, u32, u32);
-+static int crisv10_hcd_resume(struct device *, u32);
-+#endif /* CONFIG_PM */
-+static int crisv10_hcd_get_frame(struct usb_hcd *);
-+
-+static int tc_urb_enqueue(struct usb_hcd *, struct usb_host_endpoint *ep, struct urb *, gfp_t mem_flags);
-+static int tc_urb_dequeue(struct usb_hcd *, struct urb *);
-+static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep);
-+
-+static int rh_status_data_request(struct usb_hcd *, char *);
-+static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16);
-+
-+#ifdef CONFIG_PM
-+static int crisv10_hcd_hub_suspend(struct usb_hcd *);
-+static int crisv10_hcd_hub_resume(struct usb_hcd *);
-+#endif /* CONFIG_PM */
-+#ifdef CONFIG_USB_OTG
-+static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned);
-+#endif /* CONFIG_USB_OTG */
-+
-+/* host controller driver interface */
-+static const struct hc_driver crisv10_hc_driver =
-+ {
-+ .description = hc_name,
-+ .product_desc = product_desc,
-+ .hcd_priv_size = sizeof(struct crisv10_hcd),
-+
-+ /* Attaching IRQ handler manualy in probe() */
-+ /* .irq = crisv10_hcd_irq, */
-+
-+ .flags = HCD_USB11,
-+
-+ /* called to init HCD and root hub */
-+ .reset = crisv10_hcd_reset,
-+ .start = crisv10_hcd_start,
-+
-+ /* cleanly make HCD stop writing memory and doing I/O */
-+ .stop = crisv10_hcd_stop,
-+
-+ /* return current frame number */
-+ .get_frame_number = crisv10_hcd_get_frame,
-+
-+
-+ /* Manage i/o requests via the Transfer Controller */
-+ .urb_enqueue = tc_urb_enqueue,
-+ .urb_dequeue = tc_urb_dequeue,
-+
-+ /* hw synch, freeing endpoint resources that urb_dequeue can't */
-+ .endpoint_disable = tc_endpoint_disable,
-+
-+
-+ /* Root Hub support */
-+ .hub_status_data = rh_status_data_request,
-+ .hub_control = rh_control_request,
-+#ifdef CONFIG_PM
-+ .hub_suspend = rh_suspend_request,
-+ .hub_resume = rh_resume_request,
-+#endif /* CONFIG_PM */
-+#ifdef CONFIG_USB_OTG
-+ .start_port_reset = crisv10_hcd_start_port_reset,
-+#endif /* CONFIG_USB_OTG */
-+ };
-
--/* Note that these functions are always available in their "__" variants, for use in
-- error situations. The "__" missing variants are controlled by the USB_DEBUG_DESC/
-- USB_DEBUG_URB macros. */
--static void __dump_urb(struct urb* purb)
--{
-- printk("\nurb :0x%08lx\n", (unsigned long)purb);
-- printk("dev :0x%08lx\n", (unsigned long)purb->dev);
-- printk("pipe :0x%08x\n", purb->pipe);
-- printk("status :%d\n", purb->status);
-- printk("transfer_flags :0x%08x\n", purb->transfer_flags);
-- printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer);
-- printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length);
-- printk("actual_length :%d\n", purb->actual_length);
-- printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet);
-- printk("start_frame :%d\n", purb->start_frame);
-- printk("number_of_packets :%d\n", purb->number_of_packets);
-- printk("interval :%d\n", purb->interval);
-- printk("error_count :%d\n", purb->error_count);
-- printk("context :0x%08lx\n", (unsigned long)purb->context);
-- printk("complete :0x%08lx\n\n", (unsigned long)purb->complete);
--}
-
--static void __dump_in_desc(volatile USB_IN_Desc_t *in)
--{
-- printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in);
-- printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len);
-- printk(" command : 0x%04x\n", in->command);
-- printk(" next : 0x%08lx\n", in->next);
-- printk(" buf : 0x%08lx\n", in->buf);
-- printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len);
-- printk(" status : 0x%04x\n\n", in->status);
--}
-+/*
-+ * conversion between pointers to a hcd and the corresponding
-+ * crisv10_hcd
-+ */
-
--static void __dump_sb_desc(volatile USB_SB_Desc_t *sb)
-+static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd)
- {
-- char tt = (sb->command & 0x30) >> 4;
-- char *tt_string;
--
-- switch (tt) {
-- case 0:
-- tt_string = "zout";
-- break;
-- case 1:
-- tt_string = "in";
-- break;
-- case 2:
-- tt_string = "out";
-- break;
-- case 3:
-- tt_string = "setup";
-- break;
-- default:
-- tt_string = "unknown (weird)";
-- }
--
-- printk("\n USB_SB_Desc at 0x%08lx\n", (unsigned long)sb);
-- printk(" command : 0x%04x\n", sb->command);
-- printk(" rem : %d\n", (sb->command & 0x3f00) >> 8);
-- printk(" full : %d\n", (sb->command & 0x40) >> 6);
-- printk(" tt : %d (%s)\n", tt, tt_string);
-- printk(" intr : %d\n", (sb->command & 0x8) >> 3);
-- printk(" eot : %d\n", (sb->command & 0x2) >> 1);
-- printk(" eol : %d\n", sb->command & 0x1);
-- printk(" sw_len : 0x%04x (%d)\n", sb->sw_len, sb->sw_len);
-- printk(" next : 0x%08lx\n", sb->next);
-- printk(" buf : 0x%08lx\n\n", sb->buf);
-+ return (struct crisv10_hcd *) hcd->hcd_priv;
- }
-
--
--static void __dump_ep_desc(volatile USB_EP_Desc_t *ep)
-+static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd)
- {
-- printk("\nUSB_EP_Desc at 0x%08lx\n", (unsigned long)ep);
-- printk(" command : 0x%04x\n", ep->command);
-- printk(" ep_id : %d\n", (ep->command & 0x1f00) >> 8);
-- printk(" enable : %d\n", (ep->command & 0x10) >> 4);
-- printk(" intr : %d\n", (ep->command & 0x8) >> 3);
-- printk(" eof : %d\n", (ep->command & 0x2) >> 1);
-- printk(" eol : %d\n", ep->command & 0x1);
-- printk(" hw_len : 0x%04x (%d)\n", ep->hw_len, ep->hw_len);
-- printk(" next : 0x%08lx\n", ep->next);
-- printk(" sub : 0x%08lx\n\n", ep->sub);
-+ return container_of((void *) hcd, struct usb_hcd, hcd_priv);
- }
-
--static inline void __dump_ep_list(int pipe_type)
-+/* check if specified port is in use */
-+static inline int port_in_use(unsigned int port)
- {
-- volatile USB_EP_Desc_t *ep;
-- volatile USB_EP_Desc_t *first_ep;
-- volatile USB_SB_Desc_t *sb;
--
-- switch (pipe_type)
-- {
-- case PIPE_BULK:
-- first_ep = &TxBulkEPList[0];
-- break;
-- case PIPE_CONTROL:
-- first_ep = &TxCtrlEPList[0];
-- break;
-- case PIPE_INTERRUPT:
-- first_ep = &TxIntrEPList[0];
-- break;
-- case PIPE_ISOCHRONOUS:
-- first_ep = &TxIsocEPList[0];
-- break;
-- default:
-- warn("Cannot dump unknown traffic type");
-- return;
-- }
-- ep = first_ep;
--
-- printk("\n\nDumping EP list...\n\n");
--
-- do {
-- __dump_ep_desc(ep);
-- /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */
-- sb = ep->sub ? phys_to_virt(ep->sub) : 0;
-- while (sb) {
-- __dump_sb_desc(sb);
-- sb = sb->next ? phys_to_virt(sb->next) : 0;
-- }
-- ep = (volatile USB_EP_Desc_t *)(phys_to_virt(ep->next));
--
-- } while (ep != first_ep);
-+ return ports & (1 << port);
- }
-
--static inline void __dump_ept_data(int epid)
-+/* number of ports in use */
-+static inline unsigned int num_ports(void)
- {
-- unsigned long flags;
-- __u32 r_usb_ept_data;
--
-- if (epid < 0 || epid > 31) {
-- printk("Cannot dump ept data for invalid epid %d\n", epid);
-- return;
-- }
--
-- save_flags(flags);
-- cli();
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-- nop();
-- r_usb_ept_data = *R_USB_EPT_DATA;
-- restore_flags(flags);
--
-- printk("\nR_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid);
-- if (r_usb_ept_data == 0) {
-- /* No need for more detailed printing. */
-- return;
-- }
-- printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31);
-- printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30);
-- printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28);
-- printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27);
-- printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26);
-- printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24);
-- printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22);
-- printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21);
-- printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19);
-- printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11);
-- printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7);
-- printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f));
-+ unsigned int i, num = 0;
-+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++)
-+ if (port_in_use(i))
-+ num++;
-+ return num;
- }
-
--static inline void __dump_ept_data_list(void)
-+/* map hub port number to the port number used internally by the HC */
-+static inline unsigned int map_port(unsigned int port)
- {
-- int i;
--
-- printk("Dumping the whole R_USB_EPT_DATA list\n");
--
-- for (i = 0; i < 32; i++) {
-- __dump_ept_data(i);
-- }
-+ unsigned int i, num = 0;
-+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++)
-+ if (port_in_use(i))
-+ if (++num == port)
-+ return i;
-+ return -1;
- }
--#ifdef USB_DEBUG_DESC
--#define dump_in_desc(...) __dump_in_desc(...)
--#define dump_sb_desc(...) __dump_sb_desc(...)
--#define dump_ep_desc(...) __dump_ep_desc(...)
--#else
--#define dump_in_desc(...) do {} while (0)
--#define dump_sb_desc(...) do {} while (0)
--#define dump_ep_desc(...) do {} while (0)
--#endif
-
--#ifdef USB_DEBUG_URB
--#define dump_urb(x) __dump_urb(x)
--#else
--#define dump_urb(x) do {} while (0)
-+/* size of descriptors in slab cache */
-+#ifndef MAX
-+#define MAX(x, y) ((x) > (y) ? (x) : (y))
- #endif
-
--static void init_rx_buffers(void)
--{
-- int i;
-
-- DBFENTER;
-+/******************************************************************/
-+/* Hardware Interrupt functions */
-+/******************************************************************/
-+
-+/* Fast interrupt handler for HC */
-+static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd)
-+{
-+ struct usb_hcd *hcd = vcd;
-+ struct crisv10_irq_reg reg;
-+ __u32 irq_mask;
-+ unsigned long flags;
-+
-+ DBFENTER;
-+
-+ ASSERT(hcd != NULL);
-+ reg.hcd = hcd;
-+
-+ /* Turn of other interrupts while handling these sensitive cases */
-+ local_irq_save(flags);
-+
-+ /* Read out which interrupts that are flaged */
-+ irq_mask = *R_USB_IRQ_MASK_READ;
-+ reg.r_usb_irq_mask_read = irq_mask;
-+
-+ /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that
-+ R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter
-+ clears the ourun and perror fields of R_USB_STATUS. */
-+ reg.r_usb_status = *R_USB_STATUS;
-+
-+ /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn
-+ interrupts. */
-+ reg.r_usb_epid_attn = *R_USB_EPID_ATTN;
-+
-+ /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the
-+ port_status interrupt. */
-+ reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1;
-+ reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2;
-+
-+ /* Reading R_USB_FM_NUMBER clears the sof interrupt. */
-+ /* Note: the lower 11 bits contain the actual frame number, sent with each
-+ sof. */
-+ reg.r_usb_fm_number = *R_USB_FM_NUMBER;
-+
-+ /* Interrupts are handled in order of priority. */
-+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) {
-+ crisv10_hcd_port_status_irq(&reg);
-+ }
-+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) {
-+ crisv10_hcd_epid_attn_irq(&reg);
-+ }
-+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) {
-+ crisv10_hcd_ctl_status_irq(&reg);
-+ }
-+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) {
-+ crisv10_hcd_isoc_eof_irq(&reg);
-+ }
-+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) {
-+ /* Update/restart the bulk start timer since obviously the channel is
-+ running. */
-+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
-+ /* Update/restart the bulk eot timer since we just received an bulk eot
-+ interrupt. */
-+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-+
-+ /* Check for finished bulk transfers on epids */
-+ check_finished_bulk_tx_epids(hcd, 0);
-+ }
-+ local_irq_restore(flags);
-+
-+ DBFEXIT;
-+ return IRQ_HANDLED;
-+}
-+
-+
-+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) {
-+ struct usb_hcd *hcd = reg->hcd;
-+ struct crisv10_urb_priv *urb_priv;
-+ int epid;
-+ DBFENTER;
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ if (test_bit(epid, (void *)&reg->r_usb_epid_attn)) {
-+ struct urb *urb;
-+ __u32 ept_data;
-+ int error_code;
-+
-+ if (epid == DUMMY_EPID || epid == INVALID_EPID) {
-+ /* We definitely don't care about these ones. Besides, they are
-+ always disabled, so any possible disabling caused by the
-+ epid attention interrupt is irrelevant. */
-+ warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid);
-+ continue;
-+ }
-+
-+ if(!epid_inuse(epid)) {
-+ irq_err("Epid attention on epid:%d that isn't in use\n", epid);
-+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
-+ debug_epid(epid);
-+ continue;
-+ }
-+
-+ /* Note that although there are separate R_USB_EPT_DATA and
-+ R_USB_EPT_DATA_ISO registers, they are located at the same address and
-+ are of the same size. In other words, this read should be ok for isoc
-+ also. */
-+ ept_data = etrax_epid_get(epid);
-+ error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data);
-+
-+ /* Get the active URB for this epid. We blatantly assume
-+ that only this URB could have caused the epid attention. */
-+ urb = activeUrbList[epid];
-+ if (urb == NULL) {
-+ irq_err("Attention on epid:%d error:%d with no active URB.\n",
-+ epid, error_code);
-+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
-+ debug_epid(epid);
-+ continue;
-+ }
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */
-+ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-+
-+ /* Isoc traffic doesn't have error_count_in/error_count_out. */
-+ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) &&
-+ (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 ||
-+ IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) {
-+ /* Check if URB allready is marked for late-finish, we can get
-+ several 3rd error for Intr traffic when a device is unplugged */
-+ if(urb_priv->later_data == NULL) {
-+ /* 3rd error. */
-+ irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid,
-+ str_dir(urb->pipe), str_type(urb->pipe),
-+ (unsigned int)urb, urb_priv->urb_num);
-+
-+ tc_finish_urb_later(hcd, urb, -EPROTO);
-+ }
-+
-+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
-+ irq_warn("Perror for epid:%d\n", epid);
-+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff);
-+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
-+ __dump_urb(urb);
-+ debug_epid(epid);
-+
-+ if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) {
-+ /* invalid ep_id */
-+ panic("Perror because of invalid epid."
-+ " Deconfigured too early?");
-+ } else {
-+ /* past eof1, near eof, zout transfer, setup transfer */
-+ /* Dump the urb and the relevant EP descriptor. */
-+ panic("Something wrong with DMA descriptor contents."
-+ " Too much traffic inserted?");
-+ }
-+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
-+ /* buffer ourun */
-+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff);
-+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
-+ __dump_urb(urb);
-+ debug_epid(epid);
-
-- for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) {
-- RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
-- RxDescList[i].command = 0;
-- RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]);
-- RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
-- RxDescList[i].hw_len = 0;
-- RxDescList[i].status = 0;
--
-- /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as USB_IN_Desc
-- for the relevant fields.) */
-- prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]);
-+ panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid);
-+ } else {
-+ irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid,
-+ str_dir(urb->pipe), str_type(urb->pipe));
-+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
-+ __dump_urb(urb);
-+ debug_epid(epid);
-+ }
-
-+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
-+ stall)) {
-+ /* Not really a protocol error, just says that the endpoint gave
-+ a stall response. Note that error_code cannot be stall for isoc. */
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ panic("Isoc traffic cannot stall");
- }
-
-- RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
-- RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes);
-- RxDescList[i].next = virt_to_phys(&RxDescList[0]);
-- RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
-- RxDescList[i].hw_len = 0;
-- RxDescList[i].status = 0;
-+ tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid,
-+ str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb);
-+ tc_finish_urb(hcd, urb, -EPIPE);
-+
-+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
-+ bus_error)) {
-+ /* Two devices responded to a transaction request. Must be resolved
-+ by software. FIXME: Reset ports? */
-+ panic("Bus error for epid %d."
-+ " Two devices responded to transaction request\n",
-+ epid);
-+
-+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
-+ buffer_error)) {
-+ /* DMA overrun or underrun. */
-+ irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid,
-+ str_dir(urb->pipe), str_type(urb->pipe));
-+
-+ /* It seems that error_code = buffer_error in
-+ R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
-+ are the same error. */
-+ tc_finish_urb(hcd, urb, -EPROTO);
-+ } else {
-+ irq_warn("Unknown attention on epid:%d (%s %s)\n", epid,
-+ str_dir(urb->pipe), str_type(urb->pipe));
-+ dump_ept_data(epid);
-+ }
-+ }
-+ }
-+ DBFEXIT;
-+}
-+
-+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg)
-+{
-+ __u16 port_reg[USB_ROOT_HUB_PORTS];
-+ DBFENTER;
-+ port_reg[0] = reg->r_usb_rh_port_status_1;
-+ port_reg[1] = reg->r_usb_rh_port_status_2;
-+ rh_port_status_change(port_reg);
-+ DBFEXIT;
-+}
-+
-+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg)
-+{
-+ int epid;
-+ struct urb *urb;
-+ struct crisv10_urb_priv *urb_priv;
-+
-+ DBFENTER;
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
-+
-+ /* Only check epids that are in use, is valid and has SB list */
-+ if (!epid_inuse(epid) || epid == INVALID_EPID ||
-+ TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) {
-+ /* Nothing here to see. */
-+ continue;
-+ }
-+ ASSERT(epid_isoc(epid));
-+
-+ /* Get the active URB for this epid (if any). */
-+ urb = activeUrbList[epid];
-+ if (urb == 0) {
-+ isoc_warn("Ignoring NULL urb for epid:%d\n", epid);
-+ continue;
-+ }
-+ if(!epid_out_traffic(epid)) {
-+ /* Sanity check. */
-+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ if (urb_priv->urb_state == NOT_STARTED) {
-+ /* If ASAP is not set and urb->start_frame is the current frame,
-+ start the transfer. */
-+ if (!(urb->transfer_flags & URB_ISO_ASAP) &&
-+ (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) {
-+ /* EP should not be enabled if we're waiting for start_frame */
-+ ASSERT((TxIsocEPList[epid].command &
-+ IO_STATE(USB_EP_command, enable, yes)) == 0);
-+
-+ isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid);
-+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-+
-+ /* This urb is now active. */
-+ urb_priv->urb_state = STARTED;
-+ continue;
-+ }
-+ }
-+ }
-+ }
-+
-+ DBFEXIT;
-+}
-+
-+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg)
-+{
-+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd);
-+
-+ DBFENTER;
-+ ASSERT(crisv10_hcd);
-+
-+ irq_dbg("ctr_status_irq, controller status: %s\n",
-+ hcd_status_to_str(reg->r_usb_status));
-+
-+ /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB
-+ list for the corresponding epid? */
-+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
-+ panic("USB controller got ourun.");
-+ }
-+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
-+
-+ /* Before, etrax_usb_do_intr_recover was called on this epid if it was
-+ an interrupt pipe. I don't see how re-enabling all EP descriptors
-+ will help if there was a programming error. */
-+ panic("USB controller got perror.");
-+ }
-+
-+ /* Keep track of USB Controller, if it's running or not */
-+ if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) {
-+ crisv10_hcd->running = 1;
-+ } else {
-+ crisv10_hcd->running = 0;
-+ }
-+
-+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) {
-+ /* We should never operate in device mode. */
-+ panic("USB controller in device mode.");
-+ }
-+
-+ /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably
-+ using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */
-+ set_bit(HCD_FLAG_SAW_IRQ, &reg->hcd->flags);
-+
-+ DBFEXIT;
-+}
-+
-+
-+/******************************************************************/
-+/* Host Controller interface functions */
-+/******************************************************************/
-+
-+static inline void crisv10_ready_wait(void) {
-+ volatile int timeout = 10000;
-+ /* Check the busy bit of USB controller in Etrax */
-+ while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for USB controller to be idle\n");
-+ }
-+}
-+
-+/* reset host controller */
-+static int crisv10_hcd_reset(struct usb_hcd *hcd)
-+{
-+ DBFENTER;
-+ hcd_dbg(hcd, "reset\n");
-+
-+
-+ /* Reset the USB interface. */
-+ /*
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
-+ nop();
-+ */
-+ DBFEXIT;
-+ return 0;
-+}
-+
-+/* start host controller */
-+static int crisv10_hcd_start(struct usb_hcd *hcd)
-+{
-+ DBFENTER;
-+ hcd_dbg(hcd, "start\n");
-+
-+ crisv10_ready_wait();
-+
-+ /* Start processing of USB traffic. */
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
-+
-+ nop();
-+
-+ hcd->state = HC_STATE_RUNNING;
-+
-+ DBFEXIT;
-+ return 0;
-+}
-+
-+/* stop host controller */
-+static void crisv10_hcd_stop(struct usb_hcd *hcd)
-+{
-+ DBFENTER;
-+ hcd_dbg(hcd, "stop\n");
-+ crisv10_hcd_reset(hcd);
-+ DBFEXIT;
-+}
-+
-+/* return the current frame number */
-+static int crisv10_hcd_get_frame(struct usb_hcd *hcd)
-+{
-+ DBFENTER;
-+ DBFEXIT;
-+ return (*R_USB_FM_NUMBER & 0x7ff);
-+}
-+
-+#ifdef CONFIG_USB_OTG
-+
-+static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port)
-+{
-+ return 0; /* no-op for now */
-+}
-+
-+#endif /* CONFIG_USB_OTG */
-+
-+
-+/******************************************************************/
-+/* Root Hub functions */
-+/******************************************************************/
-+
-+/* root hub status */
-+static const struct usb_hub_status rh_hub_status =
-+ {
-+ .wHubStatus = 0,
-+ .wHubChange = 0,
-+ };
-+
-+/* root hub descriptor */
-+static const u8 rh_hub_descr[] =
-+ {
-+ 0x09, /* bDescLength */
-+ 0x29, /* bDescriptorType */
-+ USB_ROOT_HUB_PORTS, /* bNbrPorts */
-+ 0x00, /* wHubCharacteristics */
-+ 0x00,
-+ 0x01, /* bPwrOn2pwrGood */
-+ 0x00, /* bHubContrCurrent */
-+ 0x00, /* DeviceRemovable */
-+ 0xff /* PortPwrCtrlMask */
-+ };
-+
-+/* Actual holder of root hub status*/
-+struct crisv10_rh rh;
-+
-+/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */
-+int rh_init(void) {
-+ int i;
-+ /* Reset port status flags */
-+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) {
-+ rh.wPortChange[i] = 0;
-+ rh.wPortStatusPrev[i] = 0;
-+ }
-+ return 0;
-+}
-+
-+#define RH_FEAT_MASK ((1<<USB_PORT_FEAT_CONNECTION)|\
-+ (1<<USB_PORT_FEAT_ENABLE)|\
-+ (1<<USB_PORT_FEAT_SUSPEND)|\
-+ (1<<USB_PORT_FEAT_RESET))
-+
-+/* Handle port status change interrupt (called from bottom part interrupt) */
-+void rh_port_status_change(__u16 port_reg[]) {
-+ int i;
-+ __u16 wChange;
-+
-+ for(i = 0; i < USB_ROOT_HUB_PORTS; i++) {
-+ /* Xor out changes since last read, masked for important flags */
-+ wChange = (port_reg[i] & RH_FEAT_MASK) ^ rh.wPortStatusPrev[i];
-+ /* Or changes together with (if any) saved changes */
-+ rh.wPortChange[i] |= wChange;
-+ /* Save new status */
-+ rh.wPortStatusPrev[i] = port_reg[i];
-+
-+ if(wChange) {
-+ rh_dbg("Interrupt port_status change port%d: %s Current-status:%s\n", i+1,
-+ port_status_to_str(wChange),
-+ port_status_to_str(port_reg[i]));
-+ }
-+ }
-+}
-+
-+/* Construct port status change bitmap for the root hub */
-+static int rh_status_data_request(struct usb_hcd *hcd, char *buf)
-+{
-+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
-+ unsigned int i;
-+
-+ DBFENTER;
-+ /*
-+ * corresponds to hub status change EP (USB 2.0 spec section 11.13.4)
-+ * return bitmap indicating ports with status change
-+ */
-+ *buf = 0;
-+ spin_lock(&crisv10_hcd->lock);
-+ for (i = 1; i <= crisv10_hcd->num_ports; i++) {
-+ if (rh.wPortChange[map_port(i)]) {
-+ *buf |= (1 << i);
-+ rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i,
-+ port_status_to_str(rh.wPortChange[map_port(i)]),
-+ port_status_to_str(rh.wPortStatusPrev[map_port(i)]));
-+ }
-+ }
-+ spin_unlock(&crisv10_hcd->lock);
-+ DBFEXIT;
-+ return *buf == 0 ? 0 : 1;
-+}
-+
-+/* Handle a control request for the root hub (called from hcd_driver) */
-+static int rh_control_request(struct usb_hcd *hcd,
-+ u16 typeReq,
-+ u16 wValue,
-+ u16 wIndex,
-+ char *buf,
-+ u16 wLength) {
-+
-+ struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd);
-+ int retval = 0;
-+ int len;
-+ DBFENTER;
-+
-+ switch (typeReq) {
-+ case GetHubDescriptor:
-+ rh_dbg("GetHubDescriptor\n");
-+ len = min_t(unsigned int, sizeof rh_hub_descr, wLength);
-+ memcpy(buf, rh_hub_descr, len);
-+ buf[2] = crisv10_hcd->num_ports;
-+ break;
-+ case GetHubStatus:
-+ rh_dbg("GetHubStatus\n");
-+ len = min_t(unsigned int, sizeof rh_hub_status, wLength);
-+ memcpy(buf, &rh_hub_status, len);
-+ break;
-+ case GetPortStatus:
-+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
-+ goto error;
-+ rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex,
-+ port_status_to_str(rh.wPortChange[map_port(wIndex)]),
-+ port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)]));
-+ *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]);
-+ *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]);
-+ break;
-+ case SetHubFeature:
-+ rh_dbg("SetHubFeature\n");
-+ case ClearHubFeature:
-+ rh_dbg("ClearHubFeature\n");
-+ switch (wValue) {
-+ case C_HUB_OVER_CURRENT:
-+ case C_HUB_LOCAL_POWER:
-+ rh_warn("Not implemented hub request:%d \n", typeReq);
-+ /* not implemented */
-+ break;
-+ default:
-+ goto error;
-+ }
-+ break;
-+ case SetPortFeature:
-+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
-+ goto error;
-+ if(rh_set_port_feature(map_port(wIndex), wValue))
-+ goto error;
-+ break;
-+ case ClearPortFeature:
-+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
-+ goto error;
-+ if(rh_clear_port_feature(map_port(wIndex), wValue))
-+ goto error;
-+ break;
-+ default:
-+ rh_warn("Unknown hub request: %d\n", typeReq);
-+ error:
-+ retval = -EPIPE;
-+ }
-+ DBFEXIT;
-+ return retval;
-+}
-+
-+int rh_set_port_feature(__u8 bPort, __u16 wFeature) {
-+ __u8 bUsbCommand = 0;
-+ switch(wFeature) {
-+ case USB_PORT_FEAT_RESET:
-+ rh_dbg("SetPortFeature: reset\n");
-+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset);
-+ goto set;
-+ break;
-+ case USB_PORT_FEAT_SUSPEND:
-+ rh_dbg("SetPortFeature: suspend\n");
-+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend);
-+ goto set;
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ rh_dbg("SetPortFeature: power\n");
-+ break;
-+ case USB_PORT_FEAT_C_CONNECTION:
-+ rh_dbg("SetPortFeature: c_connection\n");
-+ break;
-+ case USB_PORT_FEAT_C_RESET:
-+ rh_dbg("SetPortFeature: c_reset\n");
-+ break;
-+ case USB_PORT_FEAT_C_OVER_CURRENT:
-+ rh_dbg("SetPortFeature: c_over_current\n");
-+ break;
-+
-+ set:
-+ /* Select which port via the port_sel field */
-+ bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1);
-+
-+ /* Make sure the controller isn't busy. */
-+ crisv10_ready_wait();
-+ /* Send out the actual command to the USB controller */
-+ *R_USB_COMMAND = bUsbCommand;
-+
-+ /* If port reset then also bring USB controller into running state */
-+ if(wFeature == USB_PORT_FEAT_RESET) {
-+ /* Wait a while for controller to first become started after port reset */
-+ udelay(12000); /* 12ms blocking wait */
-+
-+ /* Make sure the controller isn't busy. */
-+ crisv10_ready_wait();
-+
-+ /* If all enabled ports were disabled the host controller goes down into
-+ started mode, so we need to bring it back into the running state.
-+ (This is safe even if it's already in the running state.) */
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
-+ }
-+
-+ break;
-+ default:
-+ rh_dbg("SetPortFeature: unknown feature\n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+int rh_clear_port_feature(__u8 bPort, __u16 wFeature) {
-+ switch(wFeature) {
-+ case USB_PORT_FEAT_ENABLE:
-+ rh_dbg("ClearPortFeature: enable\n");
-+ rh_disable_port(bPort);
-+ break;
-+ case USB_PORT_FEAT_SUSPEND:
-+ rh_dbg("ClearPortFeature: suspend\n");
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ rh_dbg("ClearPortFeature: power\n");
-+ break;
-+
-+ case USB_PORT_FEAT_C_ENABLE:
-+ rh_dbg("ClearPortFeature: c_enable\n");
-+ goto clear;
-+ case USB_PORT_FEAT_C_SUSPEND:
-+ rh_dbg("ClearPortFeature: c_suspend\n");
-+ goto clear;
-+ case USB_PORT_FEAT_C_CONNECTION:
-+ rh_dbg("ClearPortFeature: c_connection\n");
-+ goto clear;
-+ case USB_PORT_FEAT_C_OVER_CURRENT:
-+ rh_dbg("ClearPortFeature: c_over_current\n");
-+ goto clear;
-+ case USB_PORT_FEAT_C_RESET:
-+ rh_dbg("ClearPortFeature: c_reset\n");
-+ goto clear;
-+ clear:
-+ rh.wPortChange[bPort] &= ~(1 << (wFeature - 16));
-+ break;
-+ default:
-+ rh_dbg("ClearPortFeature: unknown feature\n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+
-+#ifdef CONFIG_PM
-+/* Handle a suspend request for the root hub (called from hcd_driver) */
-+static int rh_suspend_request(struct usb_hcd *hcd)
-+{
-+ return 0; /* no-op for now */
-+}
-+
-+/* Handle a resume request for the root hub (called from hcd_driver) */
-+static int rh_resume_request(struct usb_hcd *hcd)
-+{
-+ return 0; /* no-op for now */
-+}
-+#endif /* CONFIG_PM */
-+
-+
-+
-+/* Wrapper function for workaround port disable registers in USB controller */
-+static void rh_disable_port(unsigned int port) {
-+ volatile int timeout = 10000;
-+ volatile char* usb_portx_disable;
-+ switch(port) {
-+ case 0:
-+ usb_portx_disable = R_USB_PORT1_DISABLE;
-+ break;
-+ case 1:
-+ usb_portx_disable = R_USB_PORT2_DISABLE;
-+ break;
-+ default:
-+ /* Invalid port index */
-+ return;
-+ }
-+ /* Set disable flag in special register */
-+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
-+ /* Wait until not enabled anymore */
-+ while((rh.wPortStatusPrev[port] &
-+ IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for port %d to become disabled\n", port);
-+ }
-+ /* clear disable flag in special register */
-+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
-+ rh_info("Physical port %d disabled\n", port+1);
-+}
-+
-+
-+/******************************************************************/
-+/* Transfer Controller (TC) functions */
-+/******************************************************************/
-+
-+/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it
-+ dynamically?
-+ To adjust it dynamically we would have to get an interrupt when we reach
-+ the end of the rx descriptor list, or when we get close to the end, and
-+ then allocate more descriptors. */
-+#define NBR_OF_RX_DESC 512
-+#define RX_DESC_BUF_SIZE 1024
-+#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE)
-
-- myNextRxDesc = &RxDescList[0];
-- myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
-- myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
-
-- *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc);
-- *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start);
-+/* Local variables for Transfer Controller */
-+/* --------------------------------------- */
-
-- DBFEXIT;
--}
-+/* This is a circular (double-linked) list of the active urbs for each epid.
-+ The head is never removed, and new urbs are linked onto the list as
-+ urb_entry_t elements. Don't reference urb_list directly; use the wrapper
-+ functions instead (which includes spin_locks) */
-+static struct list_head urb_list[NBR_OF_EPIDS];
-
--static void init_tx_bulk_ep(void)
--{
-- int i;
-+/* Read about the need and usage of this lock in submit_ctrl_urb. */
-+/* Lock for URB lists for each EPID */
-+static spinlock_t urb_list_lock;
-
-- DBFENTER;
-+/* Lock for EPID array register (R_USB_EPT_x) in Etrax */
-+static spinlock_t etrax_epid_lock;
-
-- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
-- CHECK_ALIGN(&TxBulkEPList[i]);
-- TxBulkEPList[i].hw_len = 0;
-- TxBulkEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
-- TxBulkEPList[i].sub = 0;
-- TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[i + 1]);
--
-- /* Initiate two EPs, disabled and with the eol flag set. No need for any
-- preserved epid. */
--
-- /* The first one has the intr flag set so we get an interrupt when the DMA
-- channel is about to become disabled. */
-- CHECK_ALIGN(&TxBulkDummyEPList[i][0]);
-- TxBulkDummyEPList[i][0].hw_len = 0;
-- TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
-- IO_STATE(USB_EP_command, eol, yes) |
-- IO_STATE(USB_EP_command, intr, yes));
-- TxBulkDummyEPList[i][0].sub = 0;
-- TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]);
--
-- /* The second one. */
-- CHECK_ALIGN(&TxBulkDummyEPList[i][1]);
-- TxBulkDummyEPList[i][1].hw_len = 0;
-- TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
-- IO_STATE(USB_EP_command, eol, yes));
-- TxBulkDummyEPList[i][1].sub = 0;
-- /* The last dummy's next pointer is the same as the current EP's next pointer. */
-- TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]);
-- }
-+/* Lock for dma8 sub0 handling */
-+static spinlock_t etrax_dma8_sub0_lock;
-
-- /* Configure the last one. */
-- CHECK_ALIGN(&TxBulkEPList[i]);
-- TxBulkEPList[i].hw_len = 0;
-- TxBulkEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) |
-- IO_FIELD(USB_EP_command, epid, i));
-- TxBulkEPList[i].sub = 0;
-- TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[0]);
--
-- /* No need configuring dummy EPs for the last one as it will never be used for
-- bulk traffic (i == INVALD_EPID at this point). */
--
-- /* Set up to start on the last EP so we will enable it when inserting traffic
-- for the first time (imitating the situation where the DMA has stopped
-- because there was no more traffic). */
-- *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]);
-- /* No point in starting the bulk channel yet.
-- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
-- DBFEXIT;
--}
-+/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line.
-+ Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be
-+ cache aligned. */
-+static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32)));
-+static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4)));
-
--static void init_tx_ctrl_ep(void)
--{
-- int i;
-+/* Pointers into RxDescList. */
-+static volatile struct USB_IN_Desc *myNextRxDesc;
-+static volatile struct USB_IN_Desc *myLastRxDesc;
-
-- DBFENTER;
-+/* A zout transfer makes a memory access at the address of its buf pointer,
-+ which means that setting this buf pointer to 0 will cause an access to the
-+ flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes
-+ (depending on DMA burst size) transfer.
-+ Instead, we set it to 1, and point it to this buffer. */
-+static int zout_buffer[4] __attribute__ ((aligned (4)));
-
-- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
-- CHECK_ALIGN(&TxCtrlEPList[i]);
-- TxCtrlEPList[i].hw_len = 0;
-- TxCtrlEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
-- TxCtrlEPList[i].sub = 0;
-- TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[i + 1]);
-- }
-+/* Cache for allocating new EP and SB descriptors. */
-+static kmem_cache_t *usb_desc_cache;
-
-- CHECK_ALIGN(&TxCtrlEPList[i]);
-- TxCtrlEPList[i].hw_len = 0;
-- TxCtrlEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) |
-- IO_FIELD(USB_EP_command, epid, i));
-+/* Cache for the data allocated in the isoc descr top half. */
-+static kmem_cache_t *isoc_compl_cache;
-
-- TxCtrlEPList[i].sub = 0;
-- TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[0]);
-+/* Cache for the data allocated when delayed finishing of URBs */
-+static kmem_cache_t *later_data_cache;
-
-- *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[0]);
-- *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
-
-- DBFEXIT;
-+/* Counter to keep track of how many Isoc EP we have sat up. Used to enable
-+ and disable iso_eof interrupt. We only need these interrupts when we have
-+ Isoc data endpoints (consumes CPU cycles).
-+ FIXME: This could be more fine granular, so this interrupt is only enabled
-+ when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */
-+static int isoc_epid_counter;
-+
-+/* Protecting wrapper functions for R_USB_EPT_x */
-+/* -------------------------------------------- */
-+static inline void etrax_epid_set(__u8 index, __u32 data) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
-+ nop();
-+ *R_USB_EPT_DATA = data;
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+}
-+
-+static inline void etrax_epid_clear_error(__u8 index) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
-+ nop();
-+ *R_USB_EPT_DATA &=
-+ ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
-+ IO_MASK(R_USB_EPT_DATA, error_count_out) |
-+ IO_MASK(R_USB_EPT_DATA, error_code));
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+}
-+
-+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout,
-+ __u8 toggle) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
-+ nop();
-+ if(dirout) {
-+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out);
-+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle);
-+ } else {
-+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in);
-+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle);
-+ }
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+}
-+
-+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) {
-+ unsigned long flags;
-+ __u8 toggle;
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
-+ nop();
-+ if (dirout) {
-+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA);
-+ } else {
-+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA);
-+ }
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+ return toggle;
-+}
-+
-+
-+static inline __u32 etrax_epid_get(__u8 index) {
-+ unsigned long flags;
-+ __u32 data;
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
-+ nop();
-+ data = *R_USB_EPT_DATA;
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+ return data;
-+}
-+
-+
-+
-+
-+/* Main functions for Transfer Controller */
-+/* -------------------------------------- */
-+
-+/* Init structs, memories and lists used by Transfer Controller */
-+int tc_init(struct usb_hcd *hcd) {
-+ int i;
-+ /* Clear software state info for all epids */
-+ memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS);
-+
-+ /* Set Invalid and Dummy as being in use and disabled */
-+ epid_state[INVALID_EPID].inuse = 1;
-+ epid_state[DUMMY_EPID].inuse = 1;
-+ epid_state[INVALID_EPID].disabled = 1;
-+ epid_state[DUMMY_EPID].disabled = 1;
-+
-+ /* Clear counter for how many Isoc epids we have sat up */
-+ isoc_epid_counter = 0;
-+
-+ /* Initialize the urb list by initiating a head for each list.
-+ Also reset list hodling active URB for each epid */
-+ for (i = 0; i < NBR_OF_EPIDS; i++) {
-+ INIT_LIST_HEAD(&urb_list[i]);
-+ activeUrbList[i] = NULL;
-+ }
-+
-+ /* Init lock for URB lists */
-+ spin_lock_init(&urb_list_lock);
-+ /* Init lock for Etrax R_USB_EPT register */
-+ spin_lock_init(&etrax_epid_lock);
-+ /* Init lock for Etrax dma8 sub0 handling */
-+ spin_lock_init(&etrax_dma8_sub0_lock);
-+
-+ /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */
-+
-+ /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also
-+ allocate SB descriptors from this cache. This is ok since
-+ sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */
-+ usb_desc_cache = kmem_cache_create("usb_desc_cache",
-+ sizeof(struct USB_EP_Desc), 0,
-+ SLAB_HWCACHE_ALIGN, 0, 0);
-+ if(usb_desc_cache == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+ /* Create slab cache for speedy allocation of memory for isoc bottom-half
-+ interrupt handling */
-+ isoc_compl_cache =
-+ kmem_cache_create("isoc_compl_cache",
-+ sizeof(struct crisv10_isoc_complete_data),
-+ 0, SLAB_HWCACHE_ALIGN, 0, 0);
-+ if(isoc_compl_cache == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+ /* Create slab cache for speedy allocation of memory for later URB finish
-+ struct */
-+ later_data_cache =
-+ kmem_cache_create("later_data_cache",
-+ sizeof(struct urb_later_data),
-+ 0, SLAB_HWCACHE_ALIGN, 0, 0);
-+ if(later_data_cache == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+
-+ /* Initiate the bulk start timer. */
-+ init_timer(&bulk_start_timer);
-+ bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL;
-+ bulk_start_timer.function = tc_bulk_start_timer_func;
-+ add_timer(&bulk_start_timer);
-+
-+
-+ /* Initiate the bulk eot timer. */
-+ init_timer(&bulk_eot_timer);
-+ bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL;
-+ bulk_eot_timer.function = tc_bulk_eot_timer_func;
-+ bulk_eot_timer.data = (unsigned long)hcd;
-+ add_timer(&bulk_eot_timer);
-+
-+ return 0;
-+}
-+
-+/* Uninitialize all resources used by Transfer Controller */
-+void tc_destroy(void) {
-+
-+ /* Destroy all slab cache */
-+ kmem_cache_destroy(usb_desc_cache);
-+ kmem_cache_destroy(isoc_compl_cache);
-+ kmem_cache_destroy(later_data_cache);
-+
-+ /* Remove timers */
-+ del_timer(&bulk_start_timer);
-+ del_timer(&bulk_eot_timer);
-+}
-+
-+static void restart_dma8_sub0(void) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&etrax_dma8_sub0_lock, flags);
-+ /* Verify that the dma is not running */
-+ if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) {
-+ struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
-+ while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) {
-+ ep = (struct USB_EP_Desc *)phys_to_virt(ep->next);
-+ }
-+ /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID.
-+ * ep->next is already a physical address; no need for a virt_to_phys. */
-+ *R_DMA_CH8_SUB0_EP = ep->next;
-+ /* Restart the DMA */
-+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
-+ }
-+ spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags);
-+}
-+
-+/* queue an URB with the transfer controller (called from hcd_driver) */
-+static int tc_urb_enqueue(struct usb_hcd *hcd,
-+ struct usb_host_endpoint *ep,
-+ struct urb *urb,
-+ gfp_t mem_flags) {
-+ int epid;
-+ int retval;
-+ int bustime = 0;
-+ int maxpacket;
-+ unsigned long flags;
-+ struct crisv10_urb_priv *urb_priv;
-+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
-+ DBFENTER;
-+
-+ if(!(crisv10_hcd->running)) {
-+ /* The USB Controller is not running, probably because no device is
-+ attached. No idea to enqueue URBs then */
-+ tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n",
-+ (unsigned int)urb);
-+ return -ENOENT;
-+ }
-+
-+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-+ /* Special case check for In Isoc transfers. Specification states that each
-+ In Isoc transfer consists of one packet and therefore it should fit into
-+ the transfer-buffer of an URB.
-+ We do the check here to be sure (an invalid scenario can be produced with
-+ parameters to the usbtest suite) */
-+ if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) &&
-+ (urb->transfer_buffer_length < maxpacket)) {
-+ tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket);
-+ return -EMSGSIZE;
-+ }
-+
-+ /* Check if there is enough bandwidth for periodic transfer */
-+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) {
-+ /* only check (and later claim) if not already claimed */
-+ if (urb->bandwidth == 0) {
-+ bustime = usb_check_bandwidth(urb->dev, urb);
-+ if (bustime < 0) {
-+ tc_err("Not enough periodic bandwidth\n");
-+ return -ENOSPC;
-+ }
-+ }
-+ }
-+
-+ /* Check if there is a epid for URBs destination, if not this function
-+ set up one. */
-+ epid = tc_setup_epid(ep, urb, mem_flags);
-+ if (epid < 0) {
-+ tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb);
-+ DBFEXIT;
-+ return -ENOMEM;
-+ }
-+
-+ if(urb == activeUrbList[epid]) {
-+ tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb);
-+ return -ENXIO;
-+ }
-+
-+ if(urb_list_entry(urb, epid)) {
-+ tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb);
-+ return -ENXIO;
-+ }
-+
-+ /* If we actively have flaged endpoint as disabled then refuse submition */
-+ if(epid_state[epid].disabled) {
-+ return -ENOENT;
-+ }
-+
-+ /* Allocate and init HC-private data for URB */
-+ if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) {
-+ DBFEXIT;
-+ return -ENOMEM;
-+ }
-+ urb_priv = urb->hcpriv;
-+
-+ tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n",
-+ (unsigned int)urb, urb_priv->urb_num, epid,
-+ pipe_to_str(urb->pipe), urb->transfer_buffer_length);
-+
-+ /* Create and link SBs required for this URB */
-+ retval = create_sb_for_urb(urb, mem_flags);
-+ if(retval != 0) {
-+ tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb,
-+ urb_priv->urb_num);
-+ urb_priv_free(hcd, urb);
-+ DBFEXIT;
-+ return retval;
-+ }
-+
-+ /* Init intr EP pool if this URB is a INTR transfer. This pool is later
-+ used when inserting EPs in the TxIntrEPList. We do the alloc here
-+ so we can't run out of memory later */
-+ if(usb_pipeint(urb->pipe)) {
-+ retval = init_intr_urb(urb, mem_flags);
-+ if(retval != 0) {
-+ tc_warn("Failed to init Intr URB\n");
-+ urb_priv_free(hcd, urb);
-+ DBFEXIT;
-+ return retval;
-+ }
-+ }
-+
-+ /* Disable other access when inserting USB */
-+ local_irq_save(flags);
-+
-+ /* Claim bandwidth, if needed */
-+ if(bustime) {
-+ usb_claim_bandwidth(urb->dev, urb, bustime, 0);
-+ }
-+
-+ /* Add URB to EP queue */
-+ urb_list_add(urb, epid, mem_flags);
-+
-+ if(usb_pipeisoc(urb->pipe)) {
-+ /* Special processing of Isoc URBs. */
-+ tc_dma_process_isoc_urb(urb);
-+ } else {
-+ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */
-+ tc_dma_process_queue(epid);
-+ }
-+
-+ local_irq_restore(flags);
-+
-+ DBFEXIT;
-+ return 0;
-+}
-+
-+/* remove an URB from the transfer controller queues (called from hcd_driver)*/
-+static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) {
-+ struct crisv10_urb_priv *urb_priv;
-+ unsigned long flags;
-+ int epid;
-+
-+ DBFENTER;
-+ /* Disable interrupts here since a descriptor interrupt for the isoc epid
-+ will modify the sb list. This could possibly be done more granular, but
-+ urb_dequeue should not be used frequently anyway.
-+ */
-+ local_irq_save(flags);
-+
-+ urb_priv = urb->hcpriv;
-+
-+ if (!urb_priv) {
-+ /* This happens if a device driver calls unlink on an urb that
-+ was never submitted (lazy driver) or if the urb was completed
-+ while dequeue was being called. */
-+ tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb);
-+ local_irq_restore(flags);
-+ return 0;
-+ }
-+ epid = urb_priv->epid;
-+
-+ tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
-+ (urb == activeUrbList[epid]) ? "active" : "queued",
-+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), epid, urb->status,
-+ (urb_priv->later_data) ? "later-sched" : "");
-+
-+ /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB
-+ that isn't active can be dequeued by just removing it from the queue */
-+ if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) ||
-+ usb_pipeint(urb->pipe)) {
-+
-+ /* Check if URB haven't gone further than the queue */
-+ if(urb != activeUrbList[epid]) {
-+ ASSERT(urb_priv->later_data == NULL);
-+ tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue"
-+ " (not active)\n", (unsigned int)urb, urb_priv->urb_num,
-+ str_dir(urb->pipe), str_type(urb->pipe), epid);
-+
-+ /* Finish the URB with error status from USB core */
-+ tc_finish_urb(hcd, urb, urb->status);
-+ local_irq_restore(flags);
-+ return 0;
-+ }
-+ }
-+
-+ /* Set URB status to Unlink for handling when interrupt comes. */
-+ urb_priv->urb_state = UNLINK;
-+
-+ /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */
-+ switch(usb_pipetype(urb->pipe)) {
-+ case PIPE_BULK:
-+ /* Check if EP still is enabled */
-+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ /* The EP was enabled, disable it. */
-+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+ }
-+ /* Kicking dummy list out of the party. */
-+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
-+ break;
-+ case PIPE_CONTROL:
-+ /* Check if EP still is enabled */
-+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ /* The EP was enabled, disable it. */
-+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+ }
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ /* Disabling, busy-wait and unlinking of Isoc SBs will be done in
-+ finish_isoc_urb(). Because there might the case when URB is dequeued
-+ but there are other valid URBs waiting */
-+
-+ /* Check if In Isoc EP still is enabled */
-+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ /* The EP was enabled, disable it. */
-+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+ }
-+ break;
-+ case PIPE_INTERRUPT:
-+ /* Special care is taken for interrupt URBs. EPs are unlinked in
-+ tc_finish_urb */
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ /* Asynchronous unlink, finish the URB later from scheduled or other
-+ event (data finished, error) */
-+ tc_finish_urb_later(hcd, urb, urb->status);
-+
-+ local_irq_restore(flags);
-+ DBFEXIT;
-+ return 0;
-+}
-+
-+
-+static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) {
-+ volatile int timeout = 10000;
-+ struct urb* urb;
-+ struct crisv10_urb_priv* urb_priv;
-+ unsigned long flags;
-+
-+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */
-+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
-+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
-+
-+ int type = epid_state[epid].type;
-+
-+ /* Setting this flag will cause enqueue() to return -ENOENT for new
-+ submitions on this endpoint and finish_urb() wont process queue further */
-+ epid_state[epid].disabled = 1;
-+
-+ switch(type) {
-+ case PIPE_BULK:
-+ /* Check if EP still is enabled */
-+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ /* The EP was enabled, disable it. */
-+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid);
-+
-+ /* Do busy-wait until DMA not using this EP descriptor anymore */
-+ while((*R_DMA_CH8_SUB0_EP ==
-+ virt_to_phys(&TxBulkEPList[epid])) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for DMA-TX-Bulk to leave EP for"
-+ " epid:%d\n", epid);
-+ }
-+ }
-+ break;
-+
-+ case PIPE_CONTROL:
-+ /* Check if EP still is enabled */
-+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ /* The EP was enabled, disable it. */
-+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid);
-+
-+ /* Do busy-wait until DMA not using this EP descriptor anymore */
-+ while((*R_DMA_CH8_SUB1_EP ==
-+ virt_to_phys(&TxCtrlEPList[epid])) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for"
-+ " epid:%d\n", epid);
-+ }
-+ }
-+ break;
-+
-+ case PIPE_INTERRUPT:
-+ local_irq_save(flags);
-+ /* Disable all Intr EPs belonging to epid */
-+ first_ep = &TxIntrEPList[0];
-+ curr_ep = first_ep;
-+ do {
-+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
-+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
-+ /* Disable EP */
-+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
-+ }
-+ curr_ep = phys_to_virt(curr_ep->next);
-+ } while (curr_ep != first_ep);
-+
-+ local_irq_restore(flags);
-+ break;
-+
-+ case PIPE_ISOCHRONOUS:
-+ /* Check if EP still is enabled */
-+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid);
-+ /* The EP was enabled, disable it. */
-+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+
-+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for"
-+ " epid:%d\n", epid);
-+ }
-+ }
-+ break;
-+ }
-+
-+ local_irq_save(flags);
-+
-+ /* Finish if there is active URB for this endpoint */
-+ if(activeUrbList[epid] != NULL) {
-+ urb = activeUrbList[epid];
-+ urb_priv = urb->hcpriv;
-+ ASSERT(urb_priv);
-+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
-+ (urb == activeUrbList[epid]) ? "active" : "queued",
-+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), epid, urb->status,
-+ (urb_priv->later_data) ? "later-sched" : "");
-+
-+ tc_finish_urb(hcd, activeUrbList[epid], -ENOENT);
-+ ASSERT(activeUrbList[epid] == NULL);
-+ }
-+
-+ /* Finish any queued URBs for this endpoint. There won't be any resubmitions
-+ because epid_disabled causes enqueue() to fail for this endpoint */
-+ while((urb = urb_list_first(epid)) != NULL) {
-+ urb_priv = urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
-+ (urb == activeUrbList[epid]) ? "active" : "queued",
-+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), epid, urb->status,
-+ (urb_priv->later_data) ? "later-sched" : "");
-+
-+ tc_finish_urb(hcd, urb, -ENOENT);
-+ }
-+ epid_state[epid].disabled = 0;
-+ local_irq_restore(flags);
-+}
-+
-+/* free resources associated with an endpoint (called from hcd_driver) */
-+static void tc_endpoint_disable(struct usb_hcd *hcd,
-+ struct usb_host_endpoint *ep) {
-+ DBFENTER;
-+ /* Only free epid if it has been allocated. We get two endpoint_disable
-+ requests for ctrl endpoints so ignore the second one */
-+ if(ep->hcpriv != NULL) {
-+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
-+ int epid = ep_priv->epid;
-+ tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n",
-+ (unsigned int)ep, (unsigned int)ep->hcpriv,
-+ endpoint_to_str(&(ep->desc)), epid);
-+
-+ tc_sync_finish_epid(hcd, epid);
-+
-+ ASSERT(activeUrbList[epid] == NULL);
-+ ASSERT(list_empty(&urb_list[epid]));
-+
-+ tc_free_epid(ep);
-+ } else {
-+ tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep,
-+ (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc)));
-+ }
-+ DBFEXIT;
-+}
-+
-+static void tc_finish_urb_later_proc(void *data) {
-+ unsigned long flags;
-+ struct urb_later_data* uld = (struct urb_later_data*)data;
-+ local_irq_save(flags);
-+ if(uld->urb == NULL) {
-+ late_dbg("Later finish of URB = NULL (allready finished)\n");
-+ } else {
-+ struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv;
-+ ASSERT(urb_priv);
-+ if(urb_priv->urb_num == uld->urb_num) {
-+ late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb),
-+ urb_priv->urb_num);
-+ if(uld->status != uld->urb->status) {
-+ errno_dbg("Later-finish URB with status:%d, later-status:%d\n",
-+ uld->urb->status, uld->status);
-+ }
-+ if(uld != urb_priv->later_data) {
-+ panic("Scheduled uld not same as URBs uld\n");
-+ }
-+ tc_finish_urb(uld->hcd, uld->urb, uld->status);
-+ } else {
-+ late_warn("Ignoring later finish of URB:0x%x[%d]"
-+ ", urb_num doesn't match current URB:0x%x[%d]",
-+ (unsigned int)(uld->urb), uld->urb_num,
-+ (unsigned int)(uld->urb), urb_priv->urb_num);
-+ }
-+ }
-+ local_irq_restore(flags);
-+ kmem_cache_free(later_data_cache, uld);
-+}
-+
-+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb,
-+ int status) {
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ struct urb_later_data* uld;
-+
-+ ASSERT(urb_priv);
-+
-+ if(urb_priv->later_data != NULL) {
-+ /* Later-finish allready scheduled for this URB, just update status to
-+ return when finishing later */
-+ errno_dbg("Later-finish schedule change URB status:%d with new"
-+ " status:%d\n", urb_priv->later_data->status, status);
-+
-+ urb_priv->later_data->status = status;
-+ return;
-+ }
-+
-+ uld = kmem_cache_alloc(later_data_cache, SLAB_ATOMIC);
-+ ASSERT(uld);
-+
-+ uld->hcd = hcd;
-+ uld->urb = urb;
-+ uld->urb_num = urb_priv->urb_num;
-+ uld->status = status;
-+
-+ INIT_WORK(&uld->ws, tc_finish_urb_later_proc, uld);
-+ urb_priv->later_data = uld;
-+
-+ /* Schedule the finishing of the URB to happen later */
-+ schedule_delayed_work(&uld->ws, LATER_TIMER_DELAY);
-+}
-+
-+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb,
-+ int status);
-+
-+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) {
-+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ int epid;
-+ char toggle;
-+ int urb_num;
-+
-+ DBFENTER;
-+ ASSERT(urb_priv != NULL);
-+ epid = urb_priv->epid;
-+ urb_num = urb_priv->urb_num;
-+
-+ if(urb != activeUrbList[epid]) {
-+ if(urb_list_entry(urb, epid)) {
-+ /* Remove this URB from the list. Only happens when URB are finished
-+ before having been processed (dequeing) */
-+ urb_list_del(urb, epid);
-+ } else {
-+ tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for"
-+ " epid:%d\n", (unsigned int)urb, urb_num, epid);
-+ }
-+ }
-+
-+ /* Cancel any pending later-finish of this URB */
-+ if(urb_priv->later_data) {
-+ urb_priv->later_data->urb = NULL;
-+ }
-+
-+ /* For an IN pipe, we always set the actual length, regardless of whether
-+ there was an error or not (which means the device driver can use the data
-+ if it wants to). */
-+ if(usb_pipein(urb->pipe)) {
-+ urb->actual_length = urb_priv->rx_offset;
-+ } else {
-+ /* Set actual_length for OUT urbs also; the USB mass storage driver seems
-+ to want that. */
-+ if (status == 0 && urb->status == -EINPROGRESS) {
-+ urb->actual_length = urb->transfer_buffer_length;
-+ } else {
-+ /* We wouldn't know of any partial writes if there was an error. */
-+ urb->actual_length = 0;
-+ }
-+ }
-+
-+
-+ /* URB status mangling */
-+ if(urb->status == -EINPROGRESS) {
-+ /* The USB core hasn't changed the status, let's set our finish status */
-+ urb->status = status;
-+
-+ if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) &&
-+ usb_pipein(urb->pipe) &&
-+ (urb->actual_length != urb->transfer_buffer_length)) {
-+ /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's
-+ max length) is to be treated as an error. */
-+ errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short"
-+ " data:%d\n", (unsigned int)urb, urb_num,
-+ urb->actual_length);
-+ urb->status = -EREMOTEIO;
-+ }
-+
-+ if(urb_priv->urb_state == UNLINK) {
-+ /* URB has been requested to be unlinked asynchronously */
-+ urb->status = -ECONNRESET;
-+ errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n",
-+ (unsigned int)urb, urb_num, urb->status);
-+ }
-+ } else {
-+ /* The USB Core wants to signal some error via the URB, pass it through */
-+ }
-+
-+ /* use completely different finish function for Isoc URBs */
-+ if(usb_pipeisoc(urb->pipe)) {
-+ tc_finish_isoc_urb(hcd, urb, status);
-+ return;
-+ }
-+
-+ /* Do special unlinking of EPs for Intr traffic */
-+ if(usb_pipeint(urb->pipe)) {
-+ tc_dma_unlink_intr_urb(urb);
-+ }
-+
-+ /* Release allocated bandwidth for periodic transfers */
-+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe))
-+ usb_release_bandwidth(urb->dev, urb, 0);
-+
-+ /* This URB is active on EP */
-+ if(urb == activeUrbList[epid]) {
-+ /* We need to fiddle with the toggle bits because the hardware doesn't do
-+ it for us. */
-+ toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe));
-+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-+ usb_pipeout(urb->pipe), toggle);
-+
-+ /* Checks for Ctrl and Bulk EPs */
-+ switch(usb_pipetype(urb->pipe)) {
-+ case PIPE_BULK:
-+ /* Check so Bulk EP realy is disabled before finishing active URB */
-+ ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) ==
-+ IO_STATE(USB_EP_command, enable, no));
-+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to
-+ process Bulk EP. */
-+ TxBulkEPList[epid].sub = 0;
-+ /* No need to wait for the DMA before changing the next pointer.
-+ The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use
-+ the last one (INVALID_EPID) for actual traffic. */
-+ TxBulkEPList[epid].next =
-+ virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
-+ break;
-+ case PIPE_CONTROL:
-+ /* Check so Ctrl EP realy is disabled before finishing active URB */
-+ ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) ==
-+ IO_STATE(USB_EP_command, enable, no));
-+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to
-+ process Ctrl EP. */
-+ TxCtrlEPList[epid].sub = 0;
-+ break;
-+ }
-+ }
-+
-+ /* Free HC-private URB data*/
-+ urb_priv_free(hcd, urb);
-+
-+ if(urb->status) {
-+ errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n",
-+ (unsigned int)urb, urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), urb->actual_length, urb->status);
-+ } else {
-+ tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n",
-+ (unsigned int)urb, urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), urb->actual_length, urb->status);
-+ }
-+
-+ /* If we just finished an active URB, clear active pointer. */
-+ if (urb == activeUrbList[epid]) {
-+ /* Make URB not active on EP anymore */
-+ activeUrbList[epid] = NULL;
-+
-+ if(urb->status == 0) {
-+ /* URB finished sucessfully, process queue to see if there are any more
-+ URBs waiting before we call completion function.*/
-+ if(crisv10_hcd->running) {
-+ /* Only process queue if USB controller is running */
-+ tc_dma_process_queue(epid);
-+ } else {
-+ tc_warn("No processing of queue for epid:%d, USB Controller not"
-+ " running\n", epid);
-+ }
-+ }
-+ }
-+
-+ /* Hand the URB from HCD to its USB device driver, using its completion
-+ functions */
-+ usb_hcd_giveback_urb (hcd, urb);
-+
-+ /* Check the queue once more if the URB returned with error, because we
-+ didn't do it before the completion function because the specification
-+ states that the queue should not restart until all it's unlinked
-+ URBs have been fully retired, with the completion functions run */
-+ if(crisv10_hcd->running) {
-+ /* Only process queue if USB controller is running */
-+ tc_dma_process_queue(epid);
-+ } else {
-+ tc_warn("No processing of queue for epid:%d, USB Controller not running\n",
-+ epid);
-+ }
-+
-+ DBFEXIT;
-+}
-+
-+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb,
-+ int status) {
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ int epid, i;
-+ volatile int timeout = 10000;
-+
-+ ASSERT(urb_priv);
-+ epid = urb_priv->epid;
-+
-+ ASSERT(usb_pipeisoc(urb->pipe));
-+
-+ /* Set that all isoc packets have status and length set before
-+ completing the urb. */
-+ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){
-+ urb->iso_frame_desc[i].actual_length = 0;
-+ urb->iso_frame_desc[i].status = -EPROTO;
-+ }
-+
-+ /* Check if the URB is currently active (done or error) */
-+ if(urb == activeUrbList[epid]) {
-+ /* Check if there are another In Isoc URB queued for this epid */
-+ if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) {
-+ /* Move it from queue to active and mark it started so Isoc transfers
-+ won't be interrupted.
-+ All Isoc URBs data transfers are already added to DMA lists so we
-+ don't have to insert anything in DMA lists here. */
-+ activeUrbList[epid] = urb_list_first(epid);
-+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state =
-+ STARTED;
-+ urb_list_del(activeUrbList[epid], epid);
-+
-+ if(urb->status) {
-+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)"
-+ " status:%d, new waiting URB:0x%x[%d]\n",
-+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), urb_priv->isoc_packet_counter,
-+ urb->number_of_packets, urb->status,
-+ (unsigned int)activeUrbList[epid],
-+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num);
-+ }
-+
-+ } else { /* No other URB queued for this epid */
-+ if(urb->status) {
-+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)"
-+ " status:%d, no new URB waiting\n",
-+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), urb_priv->isoc_packet_counter,
-+ urb->number_of_packets, urb->status);
-+ }
-+
-+ /* Check if EP is still enabled, then shut it down. */
-+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid);
-+
-+ /* Should only occur for In Isoc EPs where SB isn't consumed. */
-+ ASSERT(usb_pipein(urb->pipe));
-+
-+ /* Disable it and wait for it to stop */
-+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+
-+ /* Ah, the luxury of busy-wait. */
-+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid);
-+ }
-+ }
-+
-+ /* Unlink SB to say that epid is finished. */
-+ TxIsocEPList[epid].sub = 0;
-+ TxIsocEPList[epid].hw_len = 0;
-+
-+ /* No URB active for EP anymore */
-+ activeUrbList[epid] = NULL;
-+ }
-+ } else { /* Finishing of not active URB (queued up with SBs thought) */
-+ isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d,"
-+ " SB queued but not active\n",
-+ (unsigned int)urb, str_dir(urb->pipe),
-+ urb_priv->isoc_packet_counter, urb->number_of_packets,
-+ urb->status);
-+ if(usb_pipeout(urb->pipe)) {
-+ /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */
-+ struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb;
-+
-+ iter_sb = TxIsocEPList[epid].sub ?
-+ phys_to_virt(TxIsocEPList[epid].sub) : 0;
-+ prev_sb = 0;
-+
-+ /* SB that is linked before this URBs first SB */
-+ while (iter_sb && (iter_sb != urb_priv->first_sb)) {
-+ prev_sb = iter_sb;
-+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
-+ }
-+
-+ if (iter_sb == 0) {
-+ /* Unlink of the URB currently being transmitted. */
-+ prev_sb = 0;
-+ iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
-+ }
-+
-+ while (iter_sb && (iter_sb != urb_priv->last_sb)) {
-+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
-+ }
-+
-+ if (iter_sb) {
-+ next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
-+ } else {
-+ /* This should only happen if the DMA has completed
-+ processing the SB list for this EP while interrupts
-+ are disabled. */
-+ isoc_dbg("Isoc urb not found, already sent?\n");
-+ next_sb = 0;
-+ }
-+ if (prev_sb) {
-+ prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0;
-+ } else {
-+ TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0;
-+ }
-+ }
-+ }
-+
-+ /* Free HC-private URB data*/
-+ urb_priv_free(hcd, urb);
-+
-+ usb_release_bandwidth(urb->dev, urb, 0);
-+
-+ /* Hand the URB from HCD to its USB device driver, using its completion
-+ functions */
-+ usb_hcd_giveback_urb (hcd, urb);
-+}
-+
-+static __u32 urb_num = 0;
-+
-+/* allocate and initialize URB private data */
-+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid,
-+ int mem_flags) {
-+ struct crisv10_urb_priv *urb_priv;
-+
-+ urb_priv = kmalloc(sizeof *urb_priv, mem_flags);
-+ if (!urb_priv)
-+ return -ENOMEM;
-+ memset(urb_priv, 0, sizeof *urb_priv);
-+
-+ urb_priv->epid = epid;
-+ urb_priv->urb_state = NOT_STARTED;
-+
-+ urb->hcpriv = urb_priv;
-+ /* Assign URB a sequence number, and increment counter */
-+ urb_priv->urb_num = urb_num;
-+ urb_num++;
-+ return 0;
-+}
-+
-+/* free URB private data */
-+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) {
-+ int i;
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ ASSERT(urb_priv != 0);
-+
-+ /* Check it has any SBs linked that needs to be freed*/
-+ if(urb_priv->first_sb != NULL) {
-+ struct USB_SB_Desc *next_sb, *first_sb, *last_sb;
-+ int i = 0;
-+ first_sb = urb_priv->first_sb;
-+ last_sb = urb_priv->last_sb;
-+ ASSERT(last_sb);
-+ while(first_sb != last_sb) {
-+ next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next);
-+ kmem_cache_free(usb_desc_cache, first_sb);
-+ first_sb = next_sb;
-+ i++;
-+ }
-+ kmem_cache_free(usb_desc_cache, last_sb);
-+ i++;
-+ }
-+
-+ /* Check if it has any EPs in its Intr pool that also needs to be freed */
-+ if(urb_priv->intr_ep_pool_length > 0) {
-+ for(i = 0; i < urb_priv->intr_ep_pool_length; i++) {
-+ kfree(urb_priv->intr_ep_pool[i]);
-+ }
-+ /*
-+ tc_dbg("Freed %d EPs from URB:0x%x EP pool\n",
-+ urb_priv->intr_ep_pool_length, (unsigned int)urb);
-+ */
-+ }
-+
-+ kfree(urb_priv);
-+ urb->hcpriv = NULL;
-+}
-+
-+static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) {
-+ struct crisv10_ep_priv *ep_priv;
-+
-+ ep_priv = kmalloc(sizeof *ep_priv, mem_flags);
-+ if (!ep_priv)
-+ return -ENOMEM;
-+ memset(ep_priv, 0, sizeof *ep_priv);
-+
-+ ep->hcpriv = ep_priv;
-+ return 0;
-+}
-+
-+static void ep_priv_free(struct usb_host_endpoint *ep) {
-+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
-+ ASSERT(ep_priv);
-+ kfree(ep_priv);
-+ ep->hcpriv = NULL;
-+}
-+
-+/* EPID handling functions, managing EP-list in Etrax through wrappers */
-+/* ------------------------------------------------------------------- */
-+
-+/* Sets up a new EPID for an endpoint or returns existing if found */
-+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb,
-+ int mem_flags) {
-+ int epid;
-+ char devnum, endpoint, out_traffic, slow;
-+ int maxlen;
-+ __u32 epid_data;
-+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
-+
-+ DBFENTER;
-+
-+ /* Check if a valid epid already is setup for this endpoint */
-+ if(ep_priv != NULL) {
-+ return ep_priv->epid;
-+ }
-+
-+ /* We must find and initiate a new epid for this urb. */
-+ epid = tc_allocate_epid();
-+
-+ if (epid == -1) {
-+ /* Failed to allocate a new epid. */
-+ DBFEXIT;
-+ return epid;
-+ }
-+
-+ /* We now have a new epid to use. Claim it. */
-+ epid_state[epid].inuse = 1;
-+
-+ /* Init private data for new endpoint */
-+ if(ep_priv_create(ep, mem_flags) != 0) {
-+ return -ENOMEM;
-+ }
-+ ep_priv = ep->hcpriv;
-+ ep_priv->epid = epid;
-+
-+ devnum = usb_pipedevice(urb->pipe);
-+ endpoint = usb_pipeendpoint(urb->pipe);
-+ slow = (urb->dev->speed == USB_SPEED_LOW);
-+ maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-+
-+ if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-+ /* We want both IN and OUT control traffic to be put on the same
-+ EP/SB list. */
-+ out_traffic = 1;
-+ } else {
-+ out_traffic = usb_pipeout(urb->pipe);
-+ }
-+
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) |
-+ /* FIXME: Change any to the actual port? */
-+ IO_STATE(R_USB_EPT_DATA_ISO, port, any) |
-+ IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) |
-+ IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) |
-+ IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum);
-+ etrax_epid_iso_set(epid, epid_data);
-+ } else {
-+ epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) |
-+ IO_FIELD(R_USB_EPT_DATA, low_speed, slow) |
-+ /* FIXME: Change any to the actual port? */
-+ IO_STATE(R_USB_EPT_DATA, port, any) |
-+ IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) |
-+ IO_FIELD(R_USB_EPT_DATA, ep, endpoint) |
-+ IO_FIELD(R_USB_EPT_DATA, dev, devnum);
-+ etrax_epid_set(epid, epid_data);
-+ }
-+
-+ epid_state[epid].out_traffic = out_traffic;
-+ epid_state[epid].type = usb_pipetype(urb->pipe);
-+
-+ tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n",
-+ (unsigned int)ep, epid, devnum, endpoint, maxlen,
-+ str_type(urb->pipe), out_traffic ? "out" : "in",
-+ slow ? "low" : "full");
-+
-+ /* Enable Isoc eof interrupt if we set up the first Isoc epid */
-+ if(usb_pipeisoc(urb->pipe)) {
-+ isoc_epid_counter++;
-+ if(isoc_epid_counter == 1) {
-+ isoc_warn("Enabled Isoc eof interrupt\n");
-+ *R_USB_IRQ_MASK_SET |= IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set);
-+ }
-+ }
-+
-+ DBFEXIT;
-+ return epid;
-+}
-+
-+static void tc_free_epid(struct usb_host_endpoint *ep) {
-+ unsigned long flags;
-+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
-+ int epid;
-+ volatile int timeout = 10000;
-+
-+ DBFENTER;
-+
-+ if (ep_priv == NULL) {
-+ tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep);
-+ DBFEXIT;
-+ return;
-+ }
-+
-+ epid = ep_priv->epid;
-+
-+ /* Disable Isoc eof interrupt if we free the last Isoc epid */
-+ if(epid_isoc(epid)) {
-+ ASSERT(isoc_epid_counter > 0);
-+ isoc_epid_counter--;
-+ if(isoc_epid_counter == 0) {
-+ *R_USB_IRQ_MASK_SET &= ~IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set);
-+ isoc_warn("Disabled Isoc eof interrupt\n");
-+ }
-+ }
-+
-+ /* Take lock manualy instead of in epid_x_x wrappers,
-+ because we need to be polling here */
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-+ nop();
-+ while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for epid:%d to drop hold\n", epid);
-+ }
-+ /* This will, among other things, set the valid field to 0. */
-+ *R_USB_EPT_DATA = 0;
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+
-+ /* Free resource in software state info list */
-+ epid_state[epid].inuse = 0;
-+
-+ /* Free private endpoint data */
-+ ep_priv_free(ep);
-+
-+ DBFEXIT;
-+}
-+
-+static int tc_allocate_epid(void) {
-+ int i;
-+ DBFENTER;
-+ for (i = 0; i < NBR_OF_EPIDS; i++) {
-+ if (!epid_inuse(i)) {
-+ DBFEXIT;
-+ return i;
-+ }
-+ }
-+
-+ tc_warn("Found no free epids\n");
-+ DBFEXIT;
-+ return -1;
- }
-
-
--static void init_tx_intr_ep(void)
--{
-- int i;
-+/* Wrappers around the list functions (include/linux/list.h). */
-+/* ---------------------------------------------------------- */
-+static inline int __urb_list_empty(int epid) {
-+ int retval;
-+ retval = list_empty(&urb_list[epid]);
-+ return retval;
-+}
-
-- DBFENTER;
-+/* Returns first urb for this epid, or NULL if list is empty. */
-+static inline struct urb *urb_list_first(int epid) {
-+ unsigned long flags;
-+ struct urb *first_urb = 0;
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ if (!__urb_list_empty(epid)) {
-+ /* Get the first urb (i.e. head->next). */
-+ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list);
-+ first_urb = urb_entry->urb;
-+ }
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+ return first_urb;
-+}
-
-- /* Read comment at zout_buffer declaration for an explanation to this. */
-- TxIntrSB_zout.sw_len = 1;
-- TxIntrSB_zout.next = 0;
-- TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]);
-- TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
-- IO_STATE(USB_SB_command, tt, zout) |
-- IO_STATE(USB_SB_command, full, yes) |
-- IO_STATE(USB_SB_command, eot, yes) |
-- IO_STATE(USB_SB_command, eol, yes));
--
-- for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) {
-- CHECK_ALIGN(&TxIntrEPList[i]);
-- TxIntrEPList[i].hw_len = 0;
-- TxIntrEPList[i].command =
-- (IO_STATE(USB_EP_command, eof, yes) |
-- IO_STATE(USB_EP_command, enable, yes) |
-- IO_FIELD(USB_EP_command, epid, INVALID_EPID));
-- TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
-- TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]);
-- }
-+/* Adds an urb_entry last in the list for this epid. */
-+static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) {
-+ unsigned long flags;
-+ urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags);
-+ ASSERT(urb_entry);
-+
-+ urb_entry->urb = urb;
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ list_add_tail(&urb_entry->list, &urb_list[epid]);
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+}
-
-- CHECK_ALIGN(&TxIntrEPList[i]);
-- TxIntrEPList[i].hw_len = 0;
-- TxIntrEPList[i].command =
-- (IO_STATE(USB_EP_command, eof, yes) |
-- IO_STATE(USB_EP_command, eol, yes) |
-- IO_STATE(USB_EP_command, enable, yes) |
-- IO_FIELD(USB_EP_command, epid, INVALID_EPID));
-- TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
-- TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]);
--
-- *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]);
-- *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
-- DBFEXIT;
-+/* Search through the list for an element that contains this urb. (The list
-+ is expected to be short and the one we are about to delete will often be
-+ the first in the list.)
-+ Should be protected by spin_locks in calling function */
-+static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) {
-+ struct list_head *entry;
-+ struct list_head *tmp;
-+ urb_entry_t *urb_entry;
-+
-+ list_for_each_safe(entry, tmp, &urb_list[epid]) {
-+ urb_entry = list_entry(entry, urb_entry_t, list);
-+ ASSERT(urb_entry);
-+ ASSERT(urb_entry->urb);
-+
-+ if (urb_entry->urb == urb) {
-+ return urb_entry;
-+ }
-+ }
-+ return 0;
-+}
-+
-+/* Same function as above but for global use. Protects list by spinlock */
-+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) {
-+ unsigned long flags;
-+ urb_entry_t *urb_entry;
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ urb_entry = __urb_list_entry(urb, epid);
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+ return (urb_entry);
- }
-
--static void init_tx_isoc_ep(void)
--{
-- int i;
-+/* Delete an urb from the list. */
-+static inline void urb_list_del(struct urb *urb, int epid) {
-+ unsigned long flags;
-+ urb_entry_t *urb_entry;
-+
-+ /* Delete entry and free. */
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ urb_entry = __urb_list_entry(urb, epid);
-+ ASSERT(urb_entry);
-+
-+ list_del(&urb_entry->list);
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+ kfree(urb_entry);
-+}
-
-- DBFENTER;
-+/* Move an urb to the end of the list. */
-+static inline void urb_list_move_last(struct urb *urb, int epid) {
-+ unsigned long flags;
-+ urb_entry_t *urb_entry;
-+
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ urb_entry = __urb_list_entry(urb, epid);
-+ ASSERT(urb_entry);
-+
-+ list_del(&urb_entry->list);
-+ list_add_tail(&urb_entry->list, &urb_list[epid]);
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+}
-
-- /* Read comment at zout_buffer declaration for an explanation to this. */
-- TxIsocSB_zout.sw_len = 1;
-- TxIsocSB_zout.next = 0;
-- TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]);
-- TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
-- IO_STATE(USB_SB_command, tt, zout) |
-- IO_STATE(USB_SB_command, full, yes) |
-- IO_STATE(USB_SB_command, eot, yes) |
-- IO_STATE(USB_SB_command, eol, yes));
--
-- /* The last isochronous EP descriptor is a dummy. */
--
-- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
-- CHECK_ALIGN(&TxIsocEPList[i]);
-- TxIsocEPList[i].hw_len = 0;
-- TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
-- TxIsocEPList[i].sub = 0;
-- TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]);
-+/* Get the next urb in the list. */
-+static inline struct urb *urb_list_next(struct urb *urb, int epid) {
-+ unsigned long flags;
-+ urb_entry_t *urb_entry;
-+
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ urb_entry = __urb_list_entry(urb, epid);
-+ ASSERT(urb_entry);
-+
-+ if (urb_entry->list.next != &urb_list[epid]) {
-+ struct list_head *elem = urb_entry->list.next;
-+ urb_entry = list_entry(elem, urb_entry_t, list);
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+ return urb_entry->urb;
-+ } else {
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+ return NULL;
-+ }
-+}
-+
-+struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc,
-+ int mem_flags) {
-+ struct USB_EP_Desc *ep_desc;
-+ ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags);
-+ if(ep_desc == NULL)
-+ return NULL;
-+ memset(ep_desc, 0, sizeof(struct USB_EP_Desc));
-+
-+ ep_desc->hw_len = 0;
-+ ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) |
-+ IO_STATE(USB_EP_command, enable, yes));
-+ if(sb_desc == NULL) {
-+ ep_desc->sub = 0;
-+ } else {
-+ ep_desc->sub = virt_to_phys(sb_desc);
-+ }
-+ return ep_desc;
-+}
-+
-+#define TT_ZOUT 0
-+#define TT_IN 1
-+#define TT_OUT 2
-+#define TT_SETUP 3
-+
-+#define CMD_EOL IO_STATE(USB_SB_command, eol, yes)
-+#define CMD_INTR IO_STATE(USB_SB_command, intr, yes)
-+#define CMD_FULL IO_STATE(USB_SB_command, full, yes)
-+
-+/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT
-+ SBs. Also used by create_sb_in() to avoid same allocation procedure at two
-+ places */
-+struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data,
-+ int datalen, int mem_flags) {
-+ struct USB_SB_Desc *sb_desc;
-+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags);
-+ if(sb_desc == NULL)
-+ return NULL;
-+ memset(sb_desc, 0, sizeof(struct USB_SB_Desc));
-+
-+ sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) |
-+ IO_STATE(USB_SB_command, eot, yes);
-+
-+ sb_desc->sw_len = datalen;
-+ if(data != NULL) {
-+ sb_desc->buf = virt_to_phys(data);
-+ } else {
-+ sb_desc->buf = 0;
-+ }
-+ if(sb_prev != NULL) {
-+ sb_prev->next = virt_to_phys(sb_desc);
-+ }
-+ return sb_desc;
-+}
-+
-+/* Creates a copy of an existing SB by allocation space for it and copy
-+ settings */
-+struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) {
-+ struct USB_SB_Desc *sb_desc;
-+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags);
-+ if(sb_desc == NULL)
-+ return NULL;
-+
-+ memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc));
-+ return sb_desc;
-+}
-+
-+/* A specific create_sb function for creation of in SBs. This is due to
-+ that datalen in In SBs shows how many packets we are expecting. It also
-+ sets up the rem field to show if how many bytes we expect in last packet
-+ if it's not a full one */
-+struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen,
-+ int maxlen, int mem_flags) {
-+ struct USB_SB_Desc *sb_desc;
-+ sb_desc = create_sb(sb_prev, TT_IN, NULL,
-+ datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags);
-+ if(sb_desc == NULL)
-+ return NULL;
-+ sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen);
-+ return sb_desc;
-+}
-+
-+void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) {
-+ sb_desc->command |= flags;
-+}
-+
-+int create_sb_for_urb(struct urb *urb, int mem_flags) {
-+ int is_out = !usb_pipein(urb->pipe);
-+ int type = usb_pipetype(urb->pipe);
-+ int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out);
-+ int buf_len = urb->transfer_buffer_length;
-+ void *buf = buf_len > 0 ? urb->transfer_buffer : NULL;
-+ struct USB_SB_Desc *sb_desc = NULL;
-+
-+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv != NULL);
-+
-+ switch(type) {
-+ case PIPE_CONTROL:
-+ /* Setup stage */
-+ sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+
-+ /* Attach first SB to URB */
-+ urb_priv->first_sb = sb_desc;
-+
-+ if (is_out) { /* Out Control URB */
-+ /* If this Control OUT transfer has an optional data stage we add
-+ an OUT token before the mandatory IN (status) token */
-+ if ((buf_len > 0) && buf) {
-+ sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+ }
-+
-+ /* Status stage */
-+ /* The data length has to be exactly 1. This is due to a requirement
-+ of the USB specification that a host must be prepared to receive
-+ data in the status phase */
-+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ } else { /* In control URB */
-+ /* Data stage */
-+ sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+
-+ /* Status stage */
-+ /* Read comment at zout_buffer declaration for an explanation to this. */
-+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ /* Set descriptor interrupt flag for in URBs so we can finish URB after
-+ zout-packet has been sent */
-+ set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL);
-+ }
-+ /* Set end-of-list flag in last SB */
-+ set_sb_cmds(sb_desc, CMD_EOL);
-+ /* Attach last SB to URB */
-+ urb_priv->last_sb = sb_desc;
-+ break;
-+
-+ case PIPE_BULK:
-+ if (is_out) { /* Out Bulk URB */
-+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ /* The full field is set to yes, even if we don't actually check that
-+ this is a full-length transfer (i.e., that transfer_buffer_length %
-+ maxlen = 0).
-+ Setting full prevents the USB controller from sending an empty packet
-+ in that case. However, if URB_ZERO_PACKET was set we want that. */
-+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+ }
-+ } else { /* In Bulk URB */
-+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ }
-+ /* Set end-of-list flag for last SB */
-+ set_sb_cmds(sb_desc, CMD_EOL);
-+
-+ /* Attach SB to URB */
-+ urb_priv->first_sb = sb_desc;
-+ urb_priv->last_sb = sb_desc;
-+ break;
-+
-+ case PIPE_INTERRUPT:
-+ if(is_out) { /* Out Intr URB */
-+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+
-+ /* The full field is set to yes, even if we don't actually check that
-+ this is a full-length transfer (i.e., that transfer_buffer_length %
-+ maxlen = 0).
-+ Setting full prevents the USB controller from sending an empty packet
-+ in that case. However, if URB_ZERO_PACKET was set we want that. */
-+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+ }
-+ /* Only generate TX interrupt if it's a Out URB*/
-+ set_sb_cmds(sb_desc, CMD_INTR);
-+
-+ } else { /* In Intr URB */
-+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ }
-+ /* Set end-of-list flag for last SB */
-+ set_sb_cmds(sb_desc, CMD_EOL);
-+
-+ /* Attach SB to URB */
-+ urb_priv->first_sb = sb_desc;
-+ urb_priv->last_sb = sb_desc;
-+
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ if(is_out) { /* Out Isoc URB */
-+ int i;
-+ if(urb->number_of_packets == 0) {
-+ tc_err("Can't create SBs for Isoc URB with zero packets\n");
-+ return -EPIPE;
-+ }
-+ /* Create one SB descriptor for each packet and link them together. */
-+ for(i = 0; i < urb->number_of_packets; i++) {
-+ if (urb->iso_frame_desc[i].length > 0) {
-+
-+ sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer +
-+ urb->iso_frame_desc[i].offset,
-+ urb->iso_frame_desc[i].length, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+
-+ /* Check if it's a full length packet */
-+ if (urb->iso_frame_desc[i].length ==
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+ }
-+
-+ } else { /* zero length packet */
-+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+ }
-+ /* Attach first SB descriptor to URB */
-+ if (i == 0) {
-+ urb_priv->first_sb = sb_desc;
-+ }
-+ }
-+ /* Set interrupt and end-of-list flags in last SB */
-+ set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL);
-+ /* Attach last SB descriptor to URB */
-+ urb_priv->last_sb = sb_desc;
-+ tc_dbg("Created %d out SBs for Isoc URB:0x%x\n",
-+ urb->number_of_packets, (unsigned int)urb);
-+ } else { /* In Isoc URB */
-+ /* Actual number of packets is not relevant for periodic in traffic as
-+ long as it is more than zero. Set to 1 always. */
-+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ /* Set end-of-list flags for SB */
-+ set_sb_cmds(sb_desc, CMD_EOL);
-+
-+ /* Attach SB to URB */
-+ urb_priv->first_sb = sb_desc;
-+ urb_priv->last_sb = sb_desc;
-+ }
-+ break;
-+ default:
-+ tc_err("Unknown pipe-type\n");
-+ return -EPIPE;
-+ break;
-+ }
-+ return 0;
-+}
-+
-+int init_intr_urb(struct urb *urb, int mem_flags) {
-+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ struct USB_EP_Desc* ep_desc;
-+ int interval;
-+ int i;
-+ int ep_count;
-+
-+ ASSERT(urb_priv != NULL);
-+ ASSERT(usb_pipeint(urb->pipe));
-+ /* We can't support interval longer than amount of eof descriptors in
-+ TxIntrEPList */
-+ if(urb->interval > MAX_INTR_INTERVAL) {
-+ tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval,
-+ MAX_INTR_INTERVAL);
-+ return -EINVAL;
-+ }
-+
-+ /* We assume that the SB descriptors already have been setup */
-+ ASSERT(urb_priv->first_sb != NULL);
-+
-+ /* Round of the interval to 2^n, it is obvious that this code favours
-+ smaller numbers, but that is actually a good thing */
-+ /* FIXME: The "rounding error" for larger intervals will be quite
-+ large. For in traffic this shouldn't be a problem since it will only
-+ mean that we "poll" more often. */
-+ interval = urb->interval;
-+ for (i = 0; interval; i++) {
-+ interval = interval >> 1;
-+ }
-+ urb_priv->interval = 1 << (i - 1);
-+
-+ /* We can only have max interval for Out Interrupt due to that we can only
-+ handle one linked in EP for a certain epid in the Intr descr array at the
-+ time. The USB Controller in the Etrax 100LX continues to process Intr EPs
-+ so we have no way of knowing which one that caused the actual transfer if
-+ we have several linked in. */
-+ if(usb_pipeout(urb->pipe)) {
-+ urb_priv->interval = MAX_INTR_INTERVAL;
-+ }
-+
-+ /* Calculate amount of EPs needed */
-+ ep_count = MAX_INTR_INTERVAL / urb_priv->interval;
-+
-+ for(i = 0; i < ep_count; i++) {
-+ ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags);
-+ if(ep_desc == NULL) {
-+ /* Free any descriptors that we may have allocated before failure */
-+ while(i > 0) {
-+ i--;
-+ kfree(urb_priv->intr_ep_pool[i]);
-+ }
-+ return -ENOMEM;
-+ }
-+ urb_priv->intr_ep_pool[i] = ep_desc;
-+ }
-+ urb_priv->intr_ep_pool_length = ep_count;
-+ return 0;
-+}
-+
-+/* DMA RX/TX functions */
-+/* ----------------------- */
-+
-+static void tc_dma_init_rx_list(void) {
-+ int i;
-+
-+ /* Setup descriptor list except last one */
-+ for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) {
-+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
-+ RxDescList[i].command = 0;
-+ RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]);
-+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
-+ RxDescList[i].hw_len = 0;
-+ RxDescList[i].status = 0;
-+
-+ /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as
-+ USB_IN_Desc for the relevant fields.) */
-+ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]);
-+
-+ }
-+ /* Special handling of last descriptor */
-+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
-+ RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes);
-+ RxDescList[i].next = virt_to_phys(&RxDescList[0]);
-+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
-+ RxDescList[i].hw_len = 0;
-+ RxDescList[i].status = 0;
-+
-+ /* Setup list pointers that show progress in list */
-+ myNextRxDesc = &RxDescList[0];
-+ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
-+
-+ flush_etrax_cache();
-+ /* Point DMA to first descriptor in list and start it */
-+ *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc);
-+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start);
-+}
-+
-+
-+static void tc_dma_init_tx_bulk_list(void) {
-+ int i;
-+ volatile struct USB_EP_Desc *epDescr;
-+
-+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
-+ epDescr = &(TxBulkEPList[i]);
-+ CHECK_ALIGN(epDescr);
-+ epDescr->hw_len = 0;
-+ epDescr->command = IO_FIELD(USB_EP_command, epid, i);
-+ epDescr->sub = 0;
-+ epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]);
-+
-+ /* Initiate two EPs, disabled and with the eol flag set. No need for any
-+ preserved epid. */
-+
-+ /* The first one has the intr flag set so we get an interrupt when the DMA
-+ channel is about to become disabled. */
-+ CHECK_ALIGN(&TxBulkDummyEPList[i][0]);
-+ TxBulkDummyEPList[i][0].hw_len = 0;
-+ TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
-+ IO_STATE(USB_EP_command, eol, yes) |
-+ IO_STATE(USB_EP_command, intr, yes));
-+ TxBulkDummyEPList[i][0].sub = 0;
-+ TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]);
-+
-+ /* The second one. */
-+ CHECK_ALIGN(&TxBulkDummyEPList[i][1]);
-+ TxBulkDummyEPList[i][1].hw_len = 0;
-+ TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
-+ IO_STATE(USB_EP_command, eol, yes));
-+ TxBulkDummyEPList[i][1].sub = 0;
-+ /* The last dummy's next pointer is the same as the current EP's next pointer. */
-+ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]);
-+ }
-+
-+ /* Special handling of last descr in list, make list circular */
-+ epDescr = &TxBulkEPList[i];
-+ CHECK_ALIGN(epDescr);
-+ epDescr->hw_len = 0;
-+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) |
-+ IO_FIELD(USB_EP_command, epid, i);
-+ epDescr->sub = 0;
-+ epDescr->next = virt_to_phys(&TxBulkEPList[0]);
-+
-+ /* Init DMA sub-channel pointers to last item in each list */
-+ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]);
-+ /* No point in starting the bulk channel yet.
-+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
-+}
-+
-+static void tc_dma_init_tx_ctrl_list(void) {
-+ int i;
-+ volatile struct USB_EP_Desc *epDescr;
-+
-+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
-+ epDescr = &(TxCtrlEPList[i]);
-+ CHECK_ALIGN(epDescr);
-+ epDescr->hw_len = 0;
-+ epDescr->command = IO_FIELD(USB_EP_command, epid, i);
-+ epDescr->sub = 0;
-+ epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]);
-+ }
-+ /* Special handling of last descr in list, make list circular */
-+ epDescr = &TxCtrlEPList[i];
-+ CHECK_ALIGN(epDescr);
-+ epDescr->hw_len = 0;
-+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) |
-+ IO_FIELD(USB_EP_command, epid, i);
-+ epDescr->sub = 0;
-+ epDescr->next = virt_to_phys(&TxCtrlEPList[0]);
-+
-+ /* Init DMA sub-channel pointers to last item in each list */
-+ *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]);
-+ /* No point in starting the ctrl channel yet.
-+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
-+}
-+
-+
-+static void tc_dma_init_tx_intr_list(void) {
-+ int i;
-+
-+ TxIntrSB_zout.sw_len = 1;
-+ TxIntrSB_zout.next = 0;
-+ TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]);
-+ TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
-+ IO_STATE(USB_SB_command, tt, zout) |
-+ IO_STATE(USB_SB_command, full, yes) |
-+ IO_STATE(USB_SB_command, eot, yes) |
-+ IO_STATE(USB_SB_command, eol, yes));
-+
-+ for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) {
-+ CHECK_ALIGN(&TxIntrEPList[i]);
-+ TxIntrEPList[i].hw_len = 0;
-+ TxIntrEPList[i].command =
-+ (IO_STATE(USB_EP_command, eof, yes) |
-+ IO_STATE(USB_EP_command, enable, yes) |
-+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
-+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
-+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]);
-+ }
-+
-+ /* Special handling of last descr in list, make list circular */
-+ CHECK_ALIGN(&TxIntrEPList[i]);
-+ TxIntrEPList[i].hw_len = 0;
-+ TxIntrEPList[i].command =
-+ (IO_STATE(USB_EP_command, eof, yes) |
-+ IO_STATE(USB_EP_command, eol, yes) |
-+ IO_STATE(USB_EP_command, enable, yes) |
-+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
-+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
-+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]);
-+
-+ intr_dbg("Initiated Intr EP descriptor list\n");
-+
-+
-+ /* Connect DMA 8 sub-channel 2 to first in list */
-+ *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]);
-+}
-+
-+static void tc_dma_init_tx_isoc_list(void) {
-+ int i;
-+
-+ DBFENTER;
-+
-+ /* Read comment at zout_buffer declaration for an explanation to this. */
-+ TxIsocSB_zout.sw_len = 1;
-+ TxIsocSB_zout.next = 0;
-+ TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]);
-+ TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
-+ IO_STATE(USB_SB_command, tt, zout) |
-+ IO_STATE(USB_SB_command, full, yes) |
-+ IO_STATE(USB_SB_command, eot, yes) |
-+ IO_STATE(USB_SB_command, eol, yes));
-+
-+ /* The last isochronous EP descriptor is a dummy. */
-+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
-+ CHECK_ALIGN(&TxIsocEPList[i]);
-+ TxIsocEPList[i].hw_len = 0;
-+ TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
-+ TxIsocEPList[i].sub = 0;
-+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]);
-+ }
-+
-+ CHECK_ALIGN(&TxIsocEPList[i]);
-+ TxIsocEPList[i].hw_len = 0;
-+
-+ /* Must enable the last EP descr to get eof interrupt. */
-+ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) |
-+ IO_STATE(USB_EP_command, eof, yes) |
-+ IO_STATE(USB_EP_command, eol, yes) |
-+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
-+ TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout);
-+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]);
-+
-+ *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]);
-+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
-+}
-+
-+static int tc_dma_init(struct usb_hcd *hcd) {
-+ tc_dma_init_rx_list();
-+ tc_dma_init_tx_bulk_list();
-+ tc_dma_init_tx_ctrl_list();
-+ tc_dma_init_tx_intr_list();
-+ tc_dma_init_tx_isoc_list();
-+
-+ if (cris_request_dma(USB_TX_DMA_NBR,
-+ "ETRAX 100LX built-in USB (Tx)",
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_usb)) {
-+ err("Could not allocate DMA ch 8 for USB");
-+ return -EBUSY;
-+ }
-+
-+ if (cris_request_dma(USB_RX_DMA_NBR,
-+ "ETRAX 100LX built-in USB (Rx)",
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_usb)) {
-+ err("Could not allocate DMA ch 9 for USB");
-+ return -EBUSY;
-+ }
-+
-+ *R_IRQ_MASK2_SET =
-+ /* Note that these interrupts are not used. */
-+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) |
-+ /* Sub channel 1 (ctrl) descr. interrupts are used. */
-+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) |
-+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) |
-+ /* Sub channel 3 (isoc) descr. interrupts are used. */
-+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set);
-+
-+ /* Note that the dma9_descr interrupt is not used. */
-+ *R_IRQ_MASK2_SET =
-+ IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) |
-+ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set);
-+
-+ if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0,
-+ "ETRAX 100LX built-in USB (Rx)", hcd)) {
-+ err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ);
-+ return -EBUSY;
-+ }
-+
-+ if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0,
-+ "ETRAX 100LX built-in USB (Tx)", hcd)) {
-+ err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ);
-+ return -EBUSY;
-+ }
-+
-+ return 0;
-+}
-+
-+static void tc_dma_destroy(void) {
-+ free_irq(ETRAX_USB_RX_IRQ, NULL);
-+ free_irq(ETRAX_USB_TX_IRQ, NULL);
-+
-+ cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)");
-+ cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)");
-+
-+}
-+
-+static void tc_dma_link_intr_urb(struct urb *urb);
-+
-+/* Handle processing of Bulk, Ctrl and Intr queues */
-+static void tc_dma_process_queue(int epid) {
-+ struct urb *urb;
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ unsigned long flags;
-+ char toggle;
-+
-+ if(epid_state[epid].disabled) {
-+ /* Don't process any URBs on a disabled endpoint */
-+ return;
-+ }
-+
-+ /* Do not disturb us while fiddling with EPs and epids */
-+ local_irq_save(flags);
-+
-+ /* For bulk, Ctrl and Intr can we only have one URB active at a time for
-+ a specific EP. */
-+ if(activeUrbList[epid] != NULL) {
-+ /* An URB is already active on EP, skip checking queue */
-+ local_irq_restore(flags);
-+ return;
-+ }
-+
-+ urb = urb_list_first(epid);
-+ if(urb == NULL) {
-+ /* No URB waiting in EP queue. Nothing do to */
-+ local_irq_restore(flags);
-+ return;
-+ }
-+
-+ urb_priv = urb->hcpriv;
-+ ASSERT(urb_priv != NULL);
-+ ASSERT(urb_priv->urb_state == NOT_STARTED);
-+ ASSERT(!usb_pipeisoc(urb->pipe));
-+
-+ /* Remove this URB from the queue and move it to active */
-+ activeUrbList[epid] = urb;
-+ urb_list_del(urb, epid);
-+
-+ urb_priv->urb_state = STARTED;
-+
-+ /* Reset error counters (regardless of which direction this traffic is). */
-+ etrax_epid_clear_error(epid);
-+
-+ /* Special handling of Intr EP lists */
-+ if(usb_pipeint(urb->pipe)) {
-+ tc_dma_link_intr_urb(urb);
-+ local_irq_restore(flags);
-+ return;
-+ }
-+
-+ /* Software must preset the toggle bits for Bulk and Ctrl */
-+ if(usb_pipecontrol(urb->pipe)) {
-+ /* Toggle bits are initialized only during setup transaction in a
-+ CTRL transfer */
-+ etrax_epid_set_toggle(epid, 0, 0);
-+ etrax_epid_set_toggle(epid, 1, 0);
-+ } else {
-+ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-+ usb_pipeout(urb->pipe));
-+ etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle);
-+ }
-+
-+ tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n",
-+ (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid,
-+ sblist_to_str(urb_priv->first_sb));
-+
-+ /* We start the DMA sub channel without checking if it's running or not,
-+ because:
-+ 1) If it's already running, issuing the start command is a nop.
-+ 2) We avoid a test-and-set race condition. */
-+ switch(usb_pipetype(urb->pipe)) {
-+ case PIPE_BULK:
-+ /* Assert that the EP descriptor is disabled. */
-+ ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-+
-+ /* Set up and enable the EP descriptor. */
-+ TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-+ TxBulkEPList[epid].hw_len = 0;
-+ TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-+
-+ /* Check if the dummy list is already with us (if several urbs were queued). */
-+ if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) {
-+ tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d",
-+ (unsigned long)urb, epid);
-+
-+ /* We don't need to check if the DMA is at this EP or not before changing the
-+ next pointer, since we will do it in one 32-bit write (EP descriptors are
-+ 32-bit aligned). */
-+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]);
-+ }
-+
-+ restart_dma8_sub0();
-+
-+ /* Update/restart the bulk start timer since we just started the channel.*/
-+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
-+ /* Update/restart the bulk eot timer since we just inserted traffic. */
-+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-+ break;
-+ case PIPE_CONTROL:
-+ /* Assert that the EP descriptor is disabled. */
-+ ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-+
-+ /* Set up and enable the EP descriptor. */
-+ TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-+ TxCtrlEPList[epid].hw_len = 0;
-+ TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-+
-+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
-+ break;
-+ }
-+ local_irq_restore(flags);
-+}
-+
-+static void tc_dma_link_intr_urb(struct urb *urb) {
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ volatile struct USB_EP_Desc *tmp_ep;
-+ struct USB_EP_Desc *ep_desc;
-+ int i = 0, epid;
-+ int pool_idx = 0;
-+
-+ ASSERT(urb_priv != NULL);
-+ epid = urb_priv->epid;
-+ ASSERT(urb_priv->interval > 0);
-+ ASSERT(urb_priv->intr_ep_pool_length > 0);
-+
-+ tmp_ep = &TxIntrEPList[0];
-+
-+ /* Only insert one EP descriptor in list for Out Intr URBs.
-+ We can only handle Out Intr with interval of 128ms because
-+ it's not possible to insert several Out Intr EPs because they
-+ are not consumed by the DMA. */
-+ if(usb_pipeout(urb->pipe)) {
-+ ep_desc = urb_priv->intr_ep_pool[0];
-+ ASSERT(ep_desc);
-+ ep_desc->next = tmp_ep->next;
-+ tmp_ep->next = virt_to_phys(ep_desc);
-+ i++;
-+ } else {
-+ /* Loop through Intr EP descriptor list and insert EP for URB at
-+ specified interval */
-+ do {
-+ /* Each EP descriptor with eof flag sat signals a new frame */
-+ if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) {
-+ /* Insert a EP from URBs EP pool at correct interval */
-+ if ((i % urb_priv->interval) == 0) {
-+ ep_desc = urb_priv->intr_ep_pool[pool_idx];
-+ ASSERT(ep_desc);
-+ ep_desc->next = tmp_ep->next;
-+ tmp_ep->next = virt_to_phys(ep_desc);
-+ pool_idx++;
-+ ASSERT(pool_idx <= urb_priv->intr_ep_pool_length);
- }
-+ i++;
-+ }
-+ tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next);
-+ } while(tmp_ep != &TxIntrEPList[0]);
-+ }
-+
-+ intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid,
-+ sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx);
-+
-+ /* We start the DMA sub channel without checking if it's running or not,
-+ because:
-+ 1) If it's already running, issuing the start command is a nop.
-+ 2) We avoid a test-and-set race condition. */
-+ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
-+}
-+
-+static void tc_dma_process_isoc_urb(struct urb *urb) {
-+ unsigned long flags;
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ int epid;
-+
-+ /* Do not disturb us while fiddling with EPs and epids */
-+ local_irq_save(flags);
-+
-+ ASSERT(urb_priv);
-+ ASSERT(urb_priv->first_sb);
-+ epid = urb_priv->epid;
-+
-+ if(activeUrbList[epid] == NULL) {
-+ /* EP is idle, so make this URB active */
-+ activeUrbList[epid] = urb;
-+ urb_list_del(urb, epid);
-+ ASSERT(TxIsocEPList[epid].sub == 0);
-+ ASSERT(!(TxIsocEPList[epid].command &
-+ IO_STATE(USB_EP_command, enable, yes)));
-+
-+ /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/
-+ if(usb_pipein(urb->pipe)) {
-+ /* Each EP for In Isoc will have only one SB descriptor, setup when
-+ submitting the first active urb. We do it here by copying from URBs
-+ pre-allocated SB. */
-+ memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb,
-+ sizeof(TxIsocSBList[epid]));
-+ TxIsocEPList[epid].hw_len = 0;
-+ TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid]));
-+ } else {
-+ /* For Out Isoc we attach the pre-allocated list of SBs for the URB */
-+ TxIsocEPList[epid].hw_len = 0;
-+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-+
-+ isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x"
-+ " last_sb::0x%x\n",
-+ (unsigned int)urb, urb_priv->urb_num, epid,
-+ (unsigned int)(urb_priv->first_sb),
-+ (unsigned int)(urb_priv->last_sb));
-+ }
-+
-+ if (urb->transfer_flags & URB_ISO_ASAP) {
-+ /* The isoc transfer should be started as soon as possible. The
-+ start_frame field is a return value if URB_ISO_ASAP was set. Comparing
-+ R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN
-+ token is sent 2 frames later. I'm not sure how this affects usage of
-+ the start_frame field by the device driver, or how it affects things
-+ when USB_ISO_ASAP is not set, so therefore there's no compensation for
-+ the 2 frame "lag" here. */
-+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
-+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-+ urb_priv->urb_state = STARTED;
-+ isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n",
-+ urb->start_frame);
-+ } else {
-+ /* Not started yet. */
-+ urb_priv->urb_state = NOT_STARTED;
-+ isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n",
-+ (unsigned int)urb);
-+ }
-+
-+ } else {
-+ /* An URB is already active on the EP. Leave URB in queue and let
-+ finish_isoc_urb process it after current active URB */
-+ ASSERT(TxIsocEPList[epid].sub != 0);
-+
-+ if(usb_pipein(urb->pipe)) {
-+ /* Because there already is a active In URB on this epid we do nothing
-+ and the finish_isoc_urb() function will handle switching to next URB*/
-+
-+ } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */
-+ struct USB_SB_Desc *temp_sb_desc;
-+
-+ /* Set state STARTED to all Out Isoc URBs added to SB list because we
-+ don't know how many of them that are finished before descr interrupt*/
-+ urb_priv->urb_state = STARTED;
-+
-+ /* Find end of current SB list by looking for SB with eol flag sat */
-+ temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
-+ while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) !=
-+ IO_STATE(USB_SB_command, eol, yes)) {
-+ ASSERT(temp_sb_desc->next);
-+ temp_sb_desc = phys_to_virt(temp_sb_desc->next);
-+ }
-+
-+ isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d"
-+ " sub:0x%x eol:0x%x\n",
-+ (unsigned int)urb, urb_priv->urb_num,
-+ (unsigned int)(urb_priv->first_sb),
-+ (unsigned int)(urb_priv->last_sb), epid,
-+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
-+ (unsigned int)temp_sb_desc);
-+
-+ /* Next pointer must be set before eol is removed. */
-+ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb);
-+ /* Clear the previous end of list flag since there is a new in the
-+ added SB descriptor list. */
-+ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol);
-+
-+ if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
-+ __u32 epid_data;
-+ /* 8.8.5 in Designer's Reference says we should check for and correct
-+ any errors in the EP here. That should not be necessary if
-+ epid_attn is handled correctly, so we assume all is ok. */
-+ epid_data = etrax_epid_iso_get(epid);
-+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) !=
-+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-+ isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending"
-+ " URB:0x%x[%d]\n",
-+ IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid,
-+ (unsigned int)urb, urb_priv->urb_num);
-+ }
-+
-+ /* The SB list was exhausted. */
-+ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) {
-+ /* The new sublist did not get processed before the EP was
-+ disabled. Setup the EP again. */
-+
-+ if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) {
-+ isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted"
-+ ", restarting from this URBs SB:0x%x\n",
-+ epid, (unsigned int)temp_sb_desc,
-+ (unsigned int)(urb_priv->first_sb));
-+ TxIsocEPList[epid].hw_len = 0;
-+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
-+ /* Enable the EP again so data gets processed this time */
-+ TxIsocEPList[epid].command |=
-+ IO_STATE(USB_EP_command, enable, yes);
-+
-+ } else {
-+ /* The EP has been disabled but not at end this URB (god knows
-+ where). This should generate an epid_attn so we should not be
-+ here */
-+ isoc_warn("EP was disabled on sb:0x%x before SB list for"
-+ " URB:0x%x[%d] got processed\n",
-+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
-+ (unsigned int)urb, urb_priv->urb_num);
-+ }
-+ } else {
-+ /* This might happend if we are slow on this function and isn't
-+ an error. */
-+ isoc_dbg("EP was disabled and finished with SBs from appended"
-+ " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num);
-+ }
-+ }
-+ }
-+ }
-+
-+ /* Start the DMA sub channel */
-+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
-+
-+ local_irq_restore(flags);
-+}
-+
-+static void tc_dma_unlink_intr_urb(struct urb *urb) {
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */
-+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
-+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
-+ volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from
-+ the list. */
-+ int count = 0;
-+ volatile int timeout = 10000;
-+ int epid;
-+
-+ /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the
-+ List". */
-+ ASSERT(urb_priv);
-+ ASSERT(urb_priv->intr_ep_pool_length > 0);
-+ epid = urb_priv->epid;
-+
-+ /* First disable all Intr EPs belonging to epid for this URB */
-+ first_ep = &TxIntrEPList[0];
-+ curr_ep = first_ep;
-+ do {
-+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
-+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
-+ /* Disable EP */
-+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
-+ }
-+ curr_ep = phys_to_virt(curr_ep->next);
-+ } while (curr_ep != first_ep);
-+
-+
-+ /* Now unlink all EPs belonging to this epid from Descr list */
-+ first_ep = &TxIntrEPList[0];
-+ curr_ep = first_ep;
-+ do {
-+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
-+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
-+ /* This is the one we should unlink. */
-+ unlink_ep = next_ep;
-+
-+ /* Actually unlink the EP from the DMA list. */
-+ curr_ep->next = unlink_ep->next;
-+
-+ /* Wait until the DMA is no longer at this descriptor. */
-+ while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n");
-+ }
-+
-+ count++;
-+ }
-+ curr_ep = phys_to_virt(curr_ep->next);
-+ } while (curr_ep != first_ep);
-+
-+ if(count != urb_priv->intr_ep_pool_length) {
-+ intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count,
-+ urb_priv->intr_ep_pool_length, (unsigned int)urb,
-+ urb_priv->urb_num);
-+ } else {
-+ intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count,
-+ urb_priv->intr_ep_pool_length, (unsigned int)urb);
-+ }
-+}
-+
-+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd,
-+ int timer) {
-+ unsigned long flags;
-+ int epid;
-+ struct urb *urb;
-+ struct crisv10_urb_priv * urb_priv;
-+ __u32 epid_data;
-+
-+ /* Protect TxEPList */
-+ local_irq_save(flags);
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ /* A finished EP descriptor is disabled and has a valid sub pointer */
-+ if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
-+ (TxBulkEPList[epid].sub != 0)) {
-+
-+ /* Get the active URB for this epid */
-+ urb = activeUrbList[epid];
-+ /* Sanity checks */
-+ ASSERT(urb);
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ /* Only handle finished out Bulk EPs here,
-+ and let RX interrupt take care of the rest */
-+ if(!epid_out_traffic(epid)) {
-+ continue;
-+ }
-+
-+ if(timer) {
-+ tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n",
-+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb,
-+ urb_priv->urb_num);
-+ } else {
-+ tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n",
-+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb,
-+ urb_priv->urb_num);
-+ }
-+
-+ if(urb_priv->urb_state == UNLINK) {
-+ /* This Bulk URB is requested to be unlinked, that means that the EP
-+ has been disabled and we might not have sent all data */
-+ tc_finish_urb(hcd, urb, urb->status);
-+ continue;
-+ }
-+
-+ ASSERT(urb_priv->urb_state == STARTED);
-+ if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) {
-+ tc_err("Endpoint got disabled before reaching last sb\n");
-+ }
-+
-+ epid_data = etrax_epid_get(epid);
-+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) ==
-+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-+ /* This means that the endpoint has no error, is disabled
-+ and had inserted traffic, i.e. transfer successfully completed. */
-+ tc_finish_urb(hcd, urb, 0);
-+ } else {
-+ /* Shouldn't happen. We expect errors to be caught by epid
-+ attention. */
-+ tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n",
-+ epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data));
-+ }
-+ } else {
-+ tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid);
-+ }
-+ }
-+
-+ local_irq_restore(flags);
-+}
-+
-+static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) {
-+ unsigned long flags;
-+ int epid;
-+ struct urb *urb;
-+ struct crisv10_urb_priv * urb_priv;
-+ __u32 epid_data;
-+
-+ /* Protect TxEPList */
-+ local_irq_save(flags);
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ if(epid == DUMMY_EPID)
-+ continue;
-+
-+ /* A finished EP descriptor is disabled and has a valid sub pointer */
-+ if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
-+ (TxCtrlEPList[epid].sub != 0)) {
-+
-+ /* Get the active URB for this epid */
-+ urb = activeUrbList[epid];
-+
-+ if(urb == NULL) {
-+ tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid);
-+ continue;
-+ }
-+
-+ /* Sanity checks */
-+ ASSERT(usb_pipein(urb->pipe));
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+ if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) {
-+ tc_err("Endpoint got disabled before reaching last sb\n");
-+ }
-+
-+ epid_data = etrax_epid_get(epid);
-+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) ==
-+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-+ /* This means that the endpoint has no error, is disabled
-+ and had inserted traffic, i.e. transfer successfully completed. */
-+
-+ /* Check if RX-interrupt for In Ctrl has been processed before
-+ finishing the URB */
-+ if(urb_priv->ctrl_rx_done) {
-+ tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n",
-+ (unsigned int)urb, urb_priv->urb_num);
-+ tc_finish_urb(hcd, urb, 0);
-+ } else {
-+ /* If we get zout descriptor interrupt before RX was done for a
-+ In Ctrl transfer, then we flag that and it will be finished
-+ in the RX-Interrupt */
-+ urb_priv->ctrl_zout_done = 1;
-+ tc_dbg("Got zout descr interrupt before RX interrupt\n");
-+ }
-+ } else {
-+ /* Shouldn't happen. We expect errors to be caught by epid
-+ attention. */
-+ tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data));
-+ __dump_ep_desc(&(TxCtrlEPList[epid]));
-+ __dump_ept_data(epid);
-+ }
-+ }
-+ }
-+ local_irq_restore(flags);
-+}
-+
-+/* This function goes through all epids that are setup for Out Isoc transfers
-+ and marks (isoc_out_done) all queued URBs that the DMA has finished
-+ transfer for.
-+ No URB completetion is done here to make interrupt routine return quickly.
-+ URBs are completed later with help of complete_isoc_bottom_half() that
-+ becomes schedules when this functions is finished. */
-+static void check_finished_isoc_tx_epids(void) {
-+ unsigned long flags;
-+ int epid;
-+ struct urb *urb;
-+ struct crisv10_urb_priv * urb_priv;
-+ struct USB_SB_Desc* sb_desc;
-+ int epid_done;
-+
-+ /* Protect TxIsocEPList */
-+ local_irq_save(flags);
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID ||
-+ !epid_out_traffic(epid)) {
-+ /* Nothing here to see. */
-+ continue;
-+ }
-+ ASSERT(epid_inuse(epid));
-+ ASSERT(epid_isoc(epid));
-+
-+ sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
-+ /* Find the last descriptor of the currently active URB for this ep.
-+ This is the first descriptor in the sub list marked for a descriptor
-+ interrupt. */
-+ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) {
-+ sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0;
-+ }
-+ ASSERT(sb_desc);
-+
-+ isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n",
-+ epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
-+ (unsigned int)sb_desc);
-+
-+ urb = activeUrbList[epid];
-+ if(urb == NULL) {
-+ isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid);
-+ continue;
-+ }
-+
-+ epid_done = 0;
-+ while(urb && !epid_done) {
-+ /* Sanity check. */
-+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
-+ ASSERT(usb_pipeout(urb->pipe));
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+ ASSERT(urb_priv->urb_state == STARTED ||
-+ urb_priv->urb_state == UNLINK);
-+
-+ if (sb_desc != urb_priv->last_sb) {
-+ /* This urb has been sent. */
-+ urb_priv->isoc_out_done = 1;
-+
-+ } else { /* Found URB that has last_sb as the interrupt reason */
-+
-+ /* Check if EP has been disabled, meaning that all transfers are done*/
-+ if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
-+ ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) ==
-+ IO_STATE(USB_SB_command, eol, yes));
-+ ASSERT(sb_desc->next == 0);
-+ urb_priv->isoc_out_done = 1;
-+ } else {
-+ isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n",
-+ (unsigned int)urb, urb_priv->urb_num);
-+ }
-+ /* Stop looking any further in queue */
-+ epid_done = 1;
-+ }
-+
-+ if (!epid_done) {
-+ if(urb == activeUrbList[epid]) {
-+ urb = urb_list_first(epid);
-+ } else {
-+ urb = urb_list_next(urb, epid);
-+ }
-+ }
-+ } /* END: while(urb && !epid_done) */
-+ }
-+
-+ local_irq_restore(flags);
-+}
-+
-+
-+/* This is where the Out Isoc URBs are realy completed. This function is
-+ scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers
-+ are done. This functions completes all URBs earlier marked with
-+ isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */
-+
-+static void complete_isoc_bottom_half(void *data) {
-+ struct crisv10_isoc_complete_data *comp_data;
-+ struct usb_iso_packet_descriptor *packet;
-+ struct crisv10_urb_priv * urb_priv;
-+ unsigned long flags;
-+ struct urb* urb;
-+ int epid_done;
-+ int epid;
-+ int i;
-+
-+ comp_data = (struct crisv10_isoc_complete_data*)data;
-+
-+ local_irq_save(flags);
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
-+ if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) {
-+ /* Only check valid Out Isoc epids */
-+ continue;
-+ }
-+
-+ isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid,
-+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub));
-+
-+ /* The descriptor interrupt handler has marked all transmitted Out Isoc
-+ URBs with isoc_out_done. Now we traverse all epids and for all that
-+ have out Isoc traffic we traverse its URB list and complete the
-+ transmitted URBs. */
-+ epid_done = 0;
-+ while (!epid_done) {
-+
-+ /* Get the active urb (if any) */
-+ urb = activeUrbList[epid];
-+ if (urb == 0) {
-+ isoc_dbg("No active URB on epid:%d anymore\n", epid);
-+ epid_done = 1;
-+ continue;
-+ }
-+
-+ /* Sanity check. */
-+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
-+ ASSERT(usb_pipeout(urb->pipe));
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ if (!(urb_priv->isoc_out_done)) {
-+ /* We have reached URB that isn't flaged done yet, stop traversing. */
-+ isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d"
-+ " before not yet flaged URB:0x%x[%d]\n",
-+ epid, (unsigned int)urb, urb_priv->urb_num);
-+ epid_done = 1;
-+ continue;
-+ }
-+
-+ /* This urb has been sent. */
-+ isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n",
-+ (unsigned int)urb, urb_priv->urb_num);
-+
-+ /* Set ok on transfered packets for this URB and finish it */
-+ for (i = 0; i < urb->number_of_packets; i++) {
-+ packet = &urb->iso_frame_desc[i];
-+ packet->status = 0;
-+ packet->actual_length = packet->length;
-+ }
-+ urb_priv->isoc_packet_counter = urb->number_of_packets;
-+ tc_finish_urb(comp_data->hcd, urb, 0);
-+
-+ } /* END: while(!epid_done) */
-+ } /* END: for(epid...) */
-+
-+ local_irq_restore(flags);
-+ kmem_cache_free(isoc_compl_cache, comp_data);
-+}
-+
-+
-+static void check_finished_intr_tx_epids(struct usb_hcd *hcd) {
-+ unsigned long flags;
-+ int epid;
-+ struct urb *urb;
-+ struct crisv10_urb_priv * urb_priv;
-+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
-+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
-+
-+ /* Protect TxintrEPList */
-+ local_irq_save(flags);
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) {
-+ /* Nothing to see on this epid. Only check valid Out Intr epids */
-+ continue;
-+ }
-+
-+ urb = activeUrbList[epid];
-+ if(urb == 0) {
-+ intr_warn("Found Out Intr epid:%d with no active URB\n", epid);
-+ continue;
-+ }
-+
-+ /* Sanity check. */
-+ ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT);
-+ ASSERT(usb_pipeout(urb->pipe));
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ /* Go through EPs between first and second sof-EP. It's here Out Intr EPs
-+ are inserted.*/
-+ curr_ep = &TxIntrEPList[0];
-+ do {
-+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
-+ if(next_ep == urb_priv->intr_ep_pool[0]) {
-+ /* We found the Out Intr EP for this epid */
-+
-+ /* Disable it so it doesn't get processed again */
-+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
-+
-+ /* Finish the active Out Intr URB with status OK */
-+ tc_finish_urb(hcd, urb, 0);
-+ }
-+ curr_ep = phys_to_virt(curr_ep->next);
-+ } while (curr_ep != &TxIntrEPList[1]);
-+
-+ }
-+ local_irq_restore(flags);
-+}
-+
-+/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */
-+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) {
-+ struct usb_hcd *hcd = (struct usb_hcd*)vhc;
-+ ASSERT(hcd);
-+
-+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) {
-+ /* Clear this interrupt */
-+ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do);
-+ restart_dma8_sub0();
-+ }
-+
-+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) {
-+ /* Clear this interrupt */
-+ *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do);
-+ check_finished_ctrl_tx_epids(hcd);
-+ }
-+
-+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) {
-+ /* Clear this interrupt */
-+ *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do);
-+ check_finished_intr_tx_epids(hcd);
-+ }
-+
-+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) {
-+ struct crisv10_isoc_complete_data* comp_data;
-+
-+ /* Flag done Out Isoc for later completion */
-+ check_finished_isoc_tx_epids();
-+
-+ /* Clear this interrupt */
-+ *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do);
-+ /* Schedule bottom half of Out Isoc completion function. This function
-+ finishes the URBs marked with isoc_out_done */
-+ comp_data = (struct crisv10_isoc_complete_data*)
-+ kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC);
-+ ASSERT(comp_data != NULL);
-+ comp_data ->hcd = hcd;
-+
-+ INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half, comp_data);
-+ schedule_work(&comp_data->usb_bh);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */
-+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) {
-+ unsigned long flags;
-+ struct urb *urb;
-+ struct usb_hcd *hcd = (struct usb_hcd*)vhc;
-+ struct crisv10_urb_priv *urb_priv;
-+ int epid = 0;
-+ int real_error;
-+
-+ ASSERT(hcd);
-+
-+ /* Clear this interrupt. */
-+ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do);
-+
-+ /* Custom clear interrupt for this interrupt */
-+ /* The reason we cli here is that we call the driver's callback functions. */
-+ local_irq_save(flags);
-+
-+ /* Note that this while loop assumes that all packets span only
-+ one rx descriptor. */
-+ while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) {
-+ epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status);
-+ /* Get the active URB for this epid */
-+ urb = activeUrbList[epid];
-+
-+ ASSERT(epid_inuse(epid));
-+ if (!urb) {
-+ dma_err("No urb for epid %d in rx interrupt\n", epid);
-+ goto skip_out;
-+ }
-+
-+ /* Check if any errors on epid */
-+ real_error = 0;
-+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) {
-+ __u32 r_usb_ept_data;
-+
-+ if (usb_pipeisoc(urb->pipe)) {
-+ r_usb_ept_data = etrax_epid_iso_get(epid);
-+ if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) &&
-+ (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) &&
-+ (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) {
-+ /* Not an error, just a failure to receive an expected iso
-+ in packet in this frame. This is not documented
-+ in the designers reference. Continue processing.
-+ */
-+ } else real_error = 1;
-+ } else real_error = 1;
-+ }
-+
-+ if(real_error) {
-+ dma_err("Error in RX descr on epid:%d for URB 0x%x",
-+ epid, (unsigned int)urb);
-+ dump_ept_data(epid);
-+ dump_in_desc(myNextRxDesc);
-+ goto skip_out;
-+ }
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+ ASSERT(urb_priv->urb_state == STARTED ||
-+ urb_priv->urb_state == UNLINK);
-+
-+ if ((usb_pipetype(urb->pipe) == PIPE_BULK) ||
-+ (usb_pipetype(urb->pipe) == PIPE_CONTROL) ||
-+ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
-+
-+ /* We get nodata for empty data transactions, and the rx descriptor's
-+ hw_len field is not valid in that case. No data to copy in other
-+ words. */
-+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
-+ /* No data to copy */
-+ } else {
-+ /*
-+ dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n",
-+ (unsigned int)urb, epid, myNextRxDesc->hw_len,
-+ urb_priv->rx_offset);
-+ */
-+ /* Only copy data if URB isn't flaged to be unlinked*/
-+ if(urb_priv->urb_state != UNLINK) {
-+ /* Make sure the data fits in the buffer. */
-+ if(urb_priv->rx_offset + myNextRxDesc->hw_len
-+ <= urb->transfer_buffer_length) {
-+
-+ /* Copy the data to URBs buffer */
-+ memcpy(urb->transfer_buffer + urb_priv->rx_offset,
-+ phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len);
-+ urb_priv->rx_offset += myNextRxDesc->hw_len;
-+ } else {
-+ /* Signal overflow when returning URB */
-+ urb->status = -EOVERFLOW;
-+ tc_finish_urb_later(hcd, urb, urb->status);
-+ }
-+ }
-+ }
-+
-+ /* Check if it was the last packet in the transfer */
-+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) {
-+ /* Special handling for In Ctrl URBs. */
-+ if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) &&
-+ !(urb_priv->ctrl_zout_done)) {
-+ /* Flag that RX part of Ctrl transfer is done. Because zout descr
-+ interrupt hasn't happend yet will the URB be finished in the
-+ TX-Interrupt. */
-+ urb_priv->ctrl_rx_done = 1;
-+ tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting"
-+ " for zout\n", (unsigned int)urb);
-+ } else {
-+ tc_finish_urb(hcd, urb, 0);
-+ }
-+ }
-+ } else { /* ISOC RX */
-+ /*
-+ isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n",
-+ epid, (unsigned int)urb);
-+ */
-+
-+ struct usb_iso_packet_descriptor *packet;
-+
-+ if (urb_priv->urb_state == UNLINK) {
-+ isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n");
-+ goto skip_out;
-+ } else if (urb_priv->urb_state == NOT_STARTED) {
-+ isoc_err("What? Got Rx data for Isoc urb that isn't started?\n");
-+ goto skip_out;
-+ }
-+
-+ packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter];
-+ ASSERT(packet);
-+ packet->status = 0;
-+
-+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
-+ /* We get nodata for empty data transactions, and the rx descriptor's
-+ hw_len field is not valid in that case. We copy 0 bytes however to
-+ stay in synch. */
-+ packet->actual_length = 0;
-+ } else {
-+ packet->actual_length = myNextRxDesc->hw_len;
-+ /* Make sure the data fits in the buffer. */
-+ ASSERT(packet->actual_length <= packet->length);
-+ memcpy(urb->transfer_buffer + packet->offset,
-+ phys_to_virt(myNextRxDesc->buf), packet->actual_length);
-+ if(packet->actual_length > 0)
-+ isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n",
-+ packet->actual_length, urb_priv->isoc_packet_counter,
-+ (unsigned int)urb, urb_priv->urb_num);
-+ }
-+
-+ /* Increment the packet counter. */
-+ urb_priv->isoc_packet_counter++;
-+
-+ /* Note that we don't care about the eot field in the rx descriptor's
-+ status. It will always be set for isoc traffic. */
-+ if (urb->number_of_packets == urb_priv->isoc_packet_counter) {
-+ /* Complete the urb with status OK. */
-+ tc_finish_urb(hcd, urb, 0);
-+ }
-+ }
-+
-+ skip_out:
-+ myNextRxDesc->status = 0;
-+ myNextRxDesc->command |= IO_MASK(USB_IN_command, eol);
-+ myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol);
-+ myLastRxDesc = myNextRxDesc;
-+ myNextRxDesc = phys_to_virt(myNextRxDesc->next);
-+ flush_etrax_cache();
-+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart);
-+ }
-+
-+ local_irq_restore(flags);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void tc_bulk_start_timer_func(unsigned long dummy) {
-+ /* We might enable an EP descriptor behind the current DMA position when
-+ it's about to decide that there are no more bulk traffic and it should
-+ stop the bulk channel.
-+ Therefore we periodically check if the bulk channel is stopped and there
-+ is an enabled bulk EP descriptor, in which case we start the bulk
-+ channel. */
-+
-+ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
-+ int epid;
-+
-+ timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n");
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ timer_warn("Found enabled EP for epid %d, starting bulk channel.\n",
-+ epid);
-+ restart_dma8_sub0();
-+
-+ /* Restart the bulk eot timer since we just started the bulk channel.*/
-+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-+
-+ /* No need to search any further. */
-+ break;
-+ }
-+ }
-+ } else {
-+ timer_dbg("bulk_start_timer: Bulk DMA channel running.\n");
-+ }
-+}
-+
-+static void tc_bulk_eot_timer_func(unsigned long dummy) {
-+ struct usb_hcd *hcd = (struct usb_hcd*)dummy;
-+ ASSERT(hcd);
-+ /* Because of a race condition in the top half, we might miss a bulk eot.
-+ This timer "simulates" a bulk eot if we don't get one for a while,
-+ hopefully correcting the situation. */
-+ timer_dbg("bulk_eot_timer timed out.\n");
-+ check_finished_bulk_tx_epids(hcd, 1);
-+}
-+
-+
-+/*************************************************************/
-+/*************************************************************/
-+/* Device driver block */
-+/*************************************************************/
-+/*************************************************************/
-+
-+/* Forward declarations for device driver functions */
-+static int devdrv_hcd_probe(struct device *);
-+static int devdrv_hcd_remove(struct device *);
-+#ifdef CONFIG_PM
-+static int devdrv_hcd_suspend(struct device *, u32, u32);
-+static int devdrv_hcd_resume(struct device *, u32);
-+#endif /* CONFIG_PM */
-+
-+/* the device */
-+static struct platform_device *devdrv_hc_platform_device;
-+
-+/* device driver interface */
-+static struct device_driver devdrv_hc_device_driver = {
-+ .name = (char *) hc_name,
-+ .bus = &platform_bus_type,
-+
-+ .probe = devdrv_hcd_probe,
-+ .remove = devdrv_hcd_remove,
-+
-+#ifdef CONFIG_PM
-+ .suspend = devdrv_hcd_suspend,
-+ .resume = devdrv_hcd_resume,
-+#endif /* CONFIG_PM */
-+};
-
-- CHECK_ALIGN(&TxIsocEPList[i]);
-- TxIsocEPList[i].hw_len = 0;
--
-- /* Must enable the last EP descr to get eof interrupt. */
-- TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) |
-- IO_STATE(USB_EP_command, eof, yes) |
-- IO_STATE(USB_EP_command, eol, yes) |
-- IO_FIELD(USB_EP_command, epid, INVALID_EPID));
-- TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout);
-- TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]);
--
-- *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]);
-- *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
--
-- DBFEXIT;
--}
--
--static void etrax_usb_unlink_intr_urb(struct urb *urb)
-+/* initialize the host controller and driver */
-+static int __init_or_module devdrv_hcd_probe(struct device *dev)
- {
-- volatile USB_EP_Desc_t *first_ep; /* First EP in the list. */
-- volatile USB_EP_Desc_t *curr_ep; /* Current EP, the iterator. */
-- volatile USB_EP_Desc_t *next_ep; /* The EP after current. */
-- volatile USB_EP_Desc_t *unlink_ep; /* The one we should remove from the list. */
--
-- int epid;
--
-- /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the List". */
--
-- DBFENTER;
--
-- epid = ((etrax_urb_priv_t *)urb->hcpriv)->epid;
--
-- first_ep = &TxIntrEPList[0];
-- curr_ep = first_ep;
--
--
-- /* Note that this loop removes all EP descriptors with this epid. This assumes
-- that all EP descriptors belong to the one and only urb for this epid. */
--
-- do {
-- next_ep = (USB_EP_Desc_t *)phys_to_virt(curr_ep->next);
--
-- if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
--
-- dbg_intr("Found EP to unlink for epid %d", epid);
--
-- /* This is the one we should unlink. */
-- unlink_ep = next_ep;
--
-- /* Actually unlink the EP from the DMA list. */
-- curr_ep->next = unlink_ep->next;
--
-- /* Wait until the DMA is no longer at this descriptor. */
-- while (*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep));
-+ struct usb_hcd *hcd;
-+ struct crisv10_hcd *crisv10_hcd;
-+ int retval;
-+
-+ /* Check DMA burst length */
-+ if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) !=
-+ IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) {
-+ devdrv_err("Invalid DMA burst length in Etrax 100LX,"
-+ " needs to be 32\n");
-+ return -EPERM;
-+ }
-+
-+ hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev->bus_id);
-+ if (!hcd)
-+ return -ENOMEM;
-+
-+ crisv10_hcd = hcd_to_crisv10_hcd(hcd);
-+ spin_lock_init(&crisv10_hcd->lock);
-+ crisv10_hcd->num_ports = num_ports();
-+ crisv10_hcd->running = 0;
-+
-+ dev_set_drvdata(dev, crisv10_hcd);
-+
-+ devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ,
-+ ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ);
-+
-+ /* Print out chip version read from registers */
-+ int rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major);
-+ int rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor);
-+ if(rev_min == 0) {
-+ devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj);
-+ } else {
-+ devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min);
-+ }
-+
-+ devdrv_info("Bulk timer interval, start:%d eot:%d\n",
-+ BULK_START_TIMER_INTERVAL,
-+ BULK_EOT_TIMER_INTERVAL);
-+
-+
-+ /* Init root hub data structures */
-+ if(rh_init()) {
-+ devdrv_err("Failed init data for Root Hub\n");
-+ retval = -ENOMEM;
-+ }
-+
-+ if(port_in_use(0)) {
-+ if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) {
-+ printk(KERN_CRIT "usb-host: request IO interface usb1 failed");
-+ retval = -EBUSY;
-+ goto out;
-+ }
-+ devdrv_info("Claimed interface for USB physical port 1\n");
-+ }
-+ if(port_in_use(1)) {
-+ if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) {
-+ /* Free first interface if second failed to be claimed */
-+ if(port_in_use(0)) {
-+ cris_free_io_interface(if_usb_1);
-+ }
-+ printk(KERN_CRIT "usb-host: request IO interface usb2 failed");
-+ retval = -EBUSY;
-+ goto out;
-+ }
-+ devdrv_info("Claimed interface for USB physical port 2\n");
-+ }
-+
-+ /* Init transfer controller structs and locks */
-+ if((retval = tc_init(hcd)) != 0) {
-+ goto out;
-+ }
-+
-+ /* Attach interrupt functions for DMA and init DMA controller */
-+ if((retval = tc_dma_init(hcd)) != 0) {
-+ goto out;
-+ }
-+
-+ /* Attach the top IRQ handler for USB controller interrupts */
-+ if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0,
-+ "ETRAX 100LX built-in USB (HC)", hcd)) {
-+ err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ);
-+ retval = -EBUSY;
-+ goto out;
-+ }
-+
-+ /* iso_eof is only enabled when isoc traffic is running. */
-+ *R_USB_IRQ_MASK_SET =
-+ /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */
-+ IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) |
-+ IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) |
-+ IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) |
-+ IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set);
-+
-+
-+ crisv10_ready_wait();
-+ /* Reset the USB interface. */
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
-+
-+ /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to
-+ 0x2A30 (10800), to guarantee that control traffic gets 10% of the
-+ bandwidth, and periodic transfer may allocate the rest (90%).
-+ This doesn't work though.
-+ The value 11960 is chosen to be just after the SOF token, with a couple
-+ of bit times extra for possible bit stuffing. */
-+ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960);
-+
-+ crisv10_ready_wait();
-+ /* Configure the USB interface as a host controller. */
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config);
-+
-+
-+ /* Check so controller not busy before enabling ports */
-+ crisv10_ready_wait();
-+
-+ /* Enable selected USB ports */
-+ if(port_in_use(0)) {
-+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
-+ } else {
-+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
-+ }
-+ if(port_in_use(1)) {
-+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
-+ } else {
-+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes);
-+ }
-+
-+ crisv10_ready_wait();
-+ /* Start processing of USB traffic. */
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
-+
-+ /* Do not continue probing initialization before USB interface is done */
-+ crisv10_ready_wait();
-+
-+ /* Register our Host Controller to USB Core
-+ * Finish the remaining parts of generic HCD initialization: allocate the
-+ * buffers of consistent memory, register the bus
-+ * and call the driver's reset() and start() routines. */
-+ retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED);
-+ if (retval != 0) {
-+ devdrv_err("Failed registering HCD driver\n");
-+ goto out;
-+ }
-+
-+ return 0;
-+
-+ out:
-+ devdrv_hcd_remove(dev);
-+ return retval;
-+}
-+
-+
-+/* cleanup after the host controller and driver */
-+static int __init_or_module devdrv_hcd_remove(struct device *dev)
-+{
-+ struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev);
-+ struct usb_hcd *hcd;
-+
-+ if (!crisv10_hcd)
-+ return 0;
-+ hcd = crisv10_hcd_to_hcd(crisv10_hcd);
-+
-+
-+ /* Stop USB Controller in Etrax 100LX */
-+ crisv10_hcd_reset(hcd);
-+
-+ usb_remove_hcd(hcd);
-+ devdrv_dbg("Removed HCD from USB Core\n");
-+
-+ /* Free USB Controller IRQ */
-+ free_irq(ETRAX_USB_HC_IRQ, NULL);
-+
-+ /* Free resources */
-+ tc_dma_destroy();
-+ tc_destroy();
-+
-+
-+ if(port_in_use(0)) {
-+ cris_free_io_interface(if_usb_1);
-+ }
-+ if(port_in_use(1)) {
-+ cris_free_io_interface(if_usb_2);
-+ }
-+
-+ devdrv_dbg("Freed all claimed resources\n");
-+
-+ return 0;
-+}
-+
-+
-+#ifdef CONFIG_PM
-+
-+static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level)
-+{
-+ return 0; /* no-op for now */
-+}
-+
-+static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level)
-+{
-+ return 0; /* no-op for now */
-+}
-+
-+#endif /* CONFIG_PM */
-+
-+
-+
-+/*************************************************************/
-+/*************************************************************/
-+/* Module block */
-+/*************************************************************/
-+/*************************************************************/
-+
-+/* register driver */
-+static int __init module_hcd_init(void)
-+{
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ /* Here we select enabled ports by following defines created from
-+ menuconfig */
-+#ifndef CONFIG_ETRAX_USB_HOST_PORT1
-+ ports &= ~(1<<0);
-+#endif
-+#ifndef CONFIG_ETRAX_USB_HOST_PORT2
-+ ports &= ~(1<<1);
-+#endif
-
-- /* Now we are free to remove it and its SB descriptor.
-- Note that it is assumed here that there is only one sb in the
-- sb list for this ep. */
-- kmem_cache_free(usb_desc_cache, phys_to_virt(unlink_ep->sub));
-- kmem_cache_free(usb_desc_cache, (USB_EP_Desc_t *)unlink_ep);
-- }
-+ printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc);
-
-- curr_ep = phys_to_virt(curr_ep->next);
-+ devdrv_hc_platform_device =
-+ platform_device_register_simple((char *) hc_name, 0, NULL, 0);
-
-- } while (curr_ep != first_ep);
-- urb->hcpriv = NULL;
-+ if (IS_ERR(devdrv_hc_platform_device))
-+ return PTR_ERR(devdrv_hc_platform_device);
-+ return driver_register(&devdrv_hc_device_driver);
-+ /*
-+ * Note that we do not set the DMA mask for the device,
-+ * i.e. we pretend that we will use PIO, since no specific
-+ * allocation routines are needed for DMA buffers. This will
-+ * cause the HCD buffer allocation routines to fall back to
-+ * kmalloc().
-+ */
- }
-
--void etrax_usb_do_intr_recover(int epid)
--{
-- USB_EP_Desc_t *first_ep, *tmp_ep;
-+/* unregister driver */
-+static void __exit module_hcd_exit(void)
-+{
-+ driver_unregister(&devdrv_hc_device_driver);
-+}
-
-- DBFENTER;
--
-- first_ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB2_EP);
-- tmp_ep = first_ep;
--
-- /* What this does is simply to walk the list of interrupt
-- ep descriptors and enable those that are disabled. */
--
-- do {
-- if (IO_EXTRACT(USB_EP_command, epid, tmp_ep->command) == epid &&
-- !(tmp_ep->command & IO_MASK(USB_EP_command, enable))) {
-- tmp_ep->command |= IO_STATE(USB_EP_command, enable, yes);
-- }
--
-- tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next);
--
-- } while (tmp_ep != first_ep);
--
--
-- DBFEXIT;
--}
--
--static int etrax_rh_unlink_urb (struct urb *urb)
--{
-- etrax_hc_t *hc;
--
-- DBFENTER;
--
-- hc = urb->dev->bus->hcpriv;
--
-- if (hc->rh.urb == urb) {
-- hc->rh.send = 0;
-- del_timer(&hc->rh.rh_int_timer);
-- }
--
-- DBFEXIT;
-- return 0;
--}
--
--static void etrax_rh_send_irq(struct urb *urb)
--{
-- __u16 data = 0;
-- etrax_hc_t *hc = urb->dev->bus->hcpriv;
-- DBFENTER;
--
--/*
-- dbg_rh("R_USB_FM_NUMBER : 0x%08X", *R_USB_FM_NUMBER);
-- dbg_rh("R_USB_FM_REMAINING: 0x%08X", *R_USB_FM_REMAINING);
--*/
--
-- data |= (hc->rh.wPortChange_1) ? (1 << 1) : 0;
-- data |= (hc->rh.wPortChange_2) ? (1 << 2) : 0;
--
-- *((__u16 *)urb->transfer_buffer) = cpu_to_le16(data);
-- /* FIXME: Why is actual_length set to 1 when data is 2 bytes?
-- Since only 1 byte is used, why not declare data as __u8? */
-- urb->actual_length = 1;
-- urb->status = 0;
--
-- if (hc->rh.send && urb->complete) {
-- dbg_rh("wPortChange_1: 0x%04X", hc->rh.wPortChange_1);
-- dbg_rh("wPortChange_2: 0x%04X", hc->rh.wPortChange_2);
--
-- urb->complete(urb, NULL);
-- }
--
-- DBFEXIT;
--}
--
--static void etrax_rh_init_int_timer(struct urb *urb)
--{
-- etrax_hc_t *hc;
--
-- DBFENTER;
--
-- hc = urb->dev->bus->hcpriv;
-- hc->rh.interval = urb->interval;
-- init_timer(&hc->rh.rh_int_timer);
-- hc->rh.rh_int_timer.function = etrax_rh_int_timer_do;
-- hc->rh.rh_int_timer.data = (unsigned long)urb;
-- /* FIXME: Is the jiffies resolution enough? All intervals < 10 ms will be mapped
-- to 0, and the rest to the nearest lower 10 ms. */
-- hc->rh.rh_int_timer.expires = jiffies + ((HZ * hc->rh.interval) / 1000);
-- add_timer(&hc->rh.rh_int_timer);
--
-- DBFEXIT;
--}
--
--static void etrax_rh_int_timer_do(unsigned long ptr)
--{
-- struct urb *urb;
-- etrax_hc_t *hc;
--
-- DBFENTER;
--
-- urb = (struct urb*)ptr;
-- hc = urb->dev->bus->hcpriv;
--
-- if (hc->rh.send) {
-- etrax_rh_send_irq(urb);
-- }
--
-- DBFEXIT;
--}
--
--static int etrax_usb_setup_epid(struct urb *urb)
--{
-- int epid;
-- char devnum, endpoint, out_traffic, slow;
-- int maxlen;
-- unsigned long flags;
--
-- DBFENTER;
--
-- epid = etrax_usb_lookup_epid(urb);
-- if ((epid != -1)){
-- /* An epid that fits this urb has been found. */
-- DBFEXIT;
-- return epid;
-- }
--
-- /* We must find and initiate a new epid for this urb. */
-- epid = etrax_usb_allocate_epid();
--
-- if (epid == -1) {
-- /* Failed to allocate a new epid. */
-- DBFEXIT;
-- return epid;
-- }
--
-- /* We now have a new epid to use. Initiate it. */
-- set_bit(epid, (void *)&epid_usage_bitmask);
--
-- devnum = usb_pipedevice(urb->pipe);
-- endpoint = usb_pipeendpoint(urb->pipe);
-- slow = usb_pipeslow(urb->pipe);
-- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-- if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-- /* We want both IN and OUT control traffic to be put on the same EP/SB list. */
-- out_traffic = 1;
-- } else {
-- out_traffic = usb_pipeout(urb->pipe);
-- }
--
-- save_flags(flags);
-- cli();
--
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-- nop();
--
-- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-- *R_USB_EPT_DATA_ISO = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) |
-- /* FIXME: Change any to the actual port? */
-- IO_STATE(R_USB_EPT_DATA_ISO, port, any) |
-- IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) |
-- IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) |
-- IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum);
-- } else {
-- *R_USB_EPT_DATA = IO_STATE(R_USB_EPT_DATA, valid, yes) |
-- IO_FIELD(R_USB_EPT_DATA, low_speed, slow) |
-- /* FIXME: Change any to the actual port? */
-- IO_STATE(R_USB_EPT_DATA, port, any) |
-- IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) |
-- IO_FIELD(R_USB_EPT_DATA, ep, endpoint) |
-- IO_FIELD(R_USB_EPT_DATA, dev, devnum);
-- }
--
-- restore_flags(flags);
--
-- if (out_traffic) {
-- set_bit(epid, (void *)&epid_out_traffic);
-- } else {
-- clear_bit(epid, (void *)&epid_out_traffic);
-- }
--
-- dbg_epid("Setting up epid %d with devnum %d, endpoint %d and max_len %d (%s)",
-- epid, devnum, endpoint, maxlen, out_traffic ? "OUT" : "IN");
--
-- DBFEXIT;
-- return epid;
--}
--
--static void etrax_usb_free_epid(int epid)
--{
-- unsigned long flags;
--
-- DBFENTER;
--
-- if (!test_bit(epid, (void *)&epid_usage_bitmask)) {
-- warn("Trying to free unused epid %d", epid);
-- DBFEXIT;
-- return;
-- }
--
-- save_flags(flags);
-- cli();
--
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-- nop();
-- while (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold));
-- /* This will, among other things, set the valid field to 0. */
-- *R_USB_EPT_DATA = 0;
-- restore_flags(flags);
--
-- clear_bit(epid, (void *)&epid_usage_bitmask);
--
--
-- dbg_epid("Freed epid %d", epid);
--
-- DBFEXIT;
--}
--
--static int etrax_usb_lookup_epid(struct urb *urb)
--{
-- int i;
-- __u32 data;
-- char devnum, endpoint, slow, out_traffic;
-- int maxlen;
-- unsigned long flags;
--
-- DBFENTER;
--
-- devnum = usb_pipedevice(urb->pipe);
-- endpoint = usb_pipeendpoint(urb->pipe);
-- slow = usb_pipeslow(urb->pipe);
-- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-- if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-- /* We want both IN and OUT control traffic to be put on the same EP/SB list. */
-- out_traffic = 1;
-- } else {
-- out_traffic = usb_pipeout(urb->pipe);
-- }
--
-- /* Step through att epids. */
-- for (i = 0; i < NBR_OF_EPIDS; i++) {
-- if (test_bit(i, (void *)&epid_usage_bitmask) &&
-- test_bit(i, (void *)&epid_out_traffic) == out_traffic) {
--
-- save_flags(flags);
-- cli();
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, i);
-- nop();
--
-- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-- data = *R_USB_EPT_DATA_ISO;
-- restore_flags(flags);
--
-- if ((IO_MASK(R_USB_EPT_DATA_ISO, valid) & data) &&
-- (IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, data) == devnum) &&
-- (IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, data) == endpoint) &&
-- (IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, data) == maxlen)) {
-- dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)",
-- i, devnum, endpoint, out_traffic ? "OUT" : "IN");
-- DBFEXIT;
-- return i;
-- }
-- } else {
-- data = *R_USB_EPT_DATA;
-- restore_flags(flags);
--
-- if ((IO_MASK(R_USB_EPT_DATA, valid) & data) &&
-- (IO_EXTRACT(R_USB_EPT_DATA, dev, data) == devnum) &&
-- (IO_EXTRACT(R_USB_EPT_DATA, ep, data) == endpoint) &&
-- (IO_EXTRACT(R_USB_EPT_DATA, low_speed, data) == slow) &&
-- (IO_EXTRACT(R_USB_EPT_DATA, max_len, data) == maxlen)) {
-- dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)",
-- i, devnum, endpoint, out_traffic ? "OUT" : "IN");
-- DBFEXIT;
-- return i;
-- }
-- }
-- }
-- }
--
-- DBFEXIT;
-- return -1;
--}
--
--static int etrax_usb_allocate_epid(void)
--{
-- int i;
--
-- DBFENTER;
--
-- for (i = 0; i < NBR_OF_EPIDS; i++) {
-- if (!test_bit(i, (void *)&epid_usage_bitmask)) {
-- dbg_epid("Found free epid %d", i);
-- DBFEXIT;
-- return i;
-- }
-- }
--
-- dbg_epid("Found no free epids");
-- DBFEXIT;
-- return -1;
--}
--
--static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags)
--{
-- etrax_hc_t *hc;
-- int ret = -EINVAL;
--
-- DBFENTER;
--
-- if (!urb->dev || !urb->dev->bus) {
-- return -ENODEV;
-- }
-- if (usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)) <= 0) {
-- info("Submit urb to pipe with maxpacketlen 0, pipe 0x%X\n", urb->pipe);
-- return -EMSGSIZE;
-- }
--
-- if (urb->timeout) {
-- /* FIXME. */
-- warn("urb->timeout specified, ignoring.");
-- }
--
-- hc = (etrax_hc_t*)urb->dev->bus->hcpriv;
--
-- if (usb_pipedevice(urb->pipe) == hc->rh.devnum) {
-- /* This request is for the Virtual Root Hub. */
-- ret = etrax_rh_submit_urb(urb);
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
--
-- ret = etrax_usb_submit_bulk_urb(urb);
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
--
-- ret = etrax_usb_submit_ctrl_urb(urb);
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
-- int bustime;
--
-- if (urb->bandwidth == 0) {
-- bustime = usb_check_bandwidth(urb->dev, urb);
-- if (bustime < 0) {
-- ret = bustime;
-- } else {
-- ret = etrax_usb_submit_intr_urb(urb);
-- if (ret == 0)
-- usb_claim_bandwidth(urb->dev, urb, bustime, 0);
-- }
-- } else {
-- /* Bandwidth already set. */
-- ret = etrax_usb_submit_intr_urb(urb);
-- }
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-- int bustime;
--
-- if (urb->bandwidth == 0) {
-- bustime = usb_check_bandwidth(urb->dev, urb);
-- if (bustime < 0) {
-- ret = bustime;
-- } else {
-- ret = etrax_usb_submit_isoc_urb(urb);
-- if (ret == 0)
-- usb_claim_bandwidth(urb->dev, urb, bustime, 0);
-- }
-- } else {
-- /* Bandwidth already set. */
-- ret = etrax_usb_submit_isoc_urb(urb);
-- }
-- }
--
-- DBFEXIT;
--
-- if (ret != 0)
-- printk("Submit URB error %d\n", ret);
--
-- return ret;
--}
--
--static int etrax_usb_unlink_urb(struct urb *urb, int status)
--{
-- etrax_hc_t *hc;
-- etrax_urb_priv_t *urb_priv;
-- int epid;
-- unsigned int flags;
--
-- DBFENTER;
--
-- if (!urb) {
-- return -EINVAL;
-- }
--
-- /* Disable interrupts here since a descriptor interrupt for the isoc epid
-- will modify the sb list. This could possibly be done more granular, but
-- unlink_urb should not be used frequently anyway.
-- */
--
-- save_flags(flags);
-- cli();
--
-- if (!urb->dev || !urb->dev->bus) {
-- restore_flags(flags);
-- return -ENODEV;
-- }
-- if (!urb->hcpriv) {
-- /* This happens if a device driver calls unlink on an urb that
-- was never submitted (lazy driver) or if the urb was completed
-- while unlink was being called. */
-- restore_flags(flags);
-- return 0;
-- }
-- if (urb->transfer_flags & URB_ASYNC_UNLINK) {
-- /* FIXME. */
-- /* If URB_ASYNC_UNLINK is set:
-- unlink
-- move to a separate urb list
-- call complete at next sof with ECONNRESET
--
-- If not:
-- wait 1 ms
-- unlink
-- call complete with ENOENT
-- */
-- warn("URB_ASYNC_UNLINK set, ignoring.");
-- }
--
-- /* One might think that urb->status = -EINPROGRESS would be a requirement for unlinking,
-- but that doesn't work for interrupt and isochronous traffic since they are completed
-- repeatedly, and urb->status is set then. That may in itself be a bug though. */
--
-- hc = urb->dev->bus->hcpriv;
-- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- epid = urb_priv->epid;
--
-- /* Set the urb status (synchronous unlink). */
-- urb->status = -ENOENT;
-- urb_priv->urb_state = UNLINK;
--
-- if (usb_pipedevice(urb->pipe) == hc->rh.devnum) {
-- int ret;
-- ret = etrax_rh_unlink_urb(urb);
-- DBFEXIT;
-- restore_flags(flags);
-- return ret;
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_BULK) {
--
-- dbg_bulk("Unlink of bulk urb (0x%lx)", (unsigned long)urb);
--
-- if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-- /* The EP was enabled, disable it and wait. */
-- TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
--
-- /* Ah, the luxury of busy-wait. */
-- while (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[epid]));
-- }
-- /* Kicking dummy list out of the party. */
-- TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
--
-- dbg_ctrl("Unlink of ctrl urb (0x%lx)", (unsigned long)urb);
--
-- if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-- /* The EP was enabled, disable it and wait. */
-- TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
--
-- /* Ah, the luxury of busy-wait. */
-- while (*R_DMA_CH8_SUB1_EP == virt_to_phys(&TxCtrlEPList[epid]));
-- }
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
--
-- dbg_intr("Unlink of intr urb (0x%lx)", (unsigned long)urb);
--
-- /* Separate function because it's a tad more complicated. */
-- etrax_usb_unlink_intr_urb(urb);
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
--
-- dbg_isoc("Unlink of isoc urb (0x%lx)", (unsigned long)urb);
--
-- if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-- /* The EP was enabled, disable it and wait. */
-- TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
--
-- /* Ah, the luxury of busy-wait. */
-- while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid]));
-- }
-- }
--
-- /* Note that we need to remove the urb from the urb list *before* removing its SB
-- descriptors. (This means that the isoc eof handler might get a null urb when we
-- are unlinking the last urb.) */
--
-- if (usb_pipetype(urb->pipe) == PIPE_BULK) {
--
-- urb_list_del(urb, epid);
-- TxBulkEPList[epid].sub = 0;
-- etrax_remove_from_sb_list(urb);
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
--
-- urb_list_del(urb, epid);
-- TxCtrlEPList[epid].sub = 0;
-- etrax_remove_from_sb_list(urb);
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
--
-- urb_list_del(urb, epid);
-- /* Sanity check (should never happen). */
-- assert(urb_list_empty(epid));
--
-- /* Release allocated bandwidth. */
-- usb_release_bandwidth(urb->dev, urb, 0);
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
--
-- if (usb_pipeout(urb->pipe)) {
--
-- USB_SB_Desc_t *iter_sb, *prev_sb, *next_sb;
--
-- if (__urb_list_entry(urb, epid)) {
--
-- urb_list_del(urb, epid);
-- iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
-- prev_sb = 0;
-- while (iter_sb && (iter_sb != urb_priv->first_sb)) {
-- prev_sb = iter_sb;
-- iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
-- }
--
-- if (iter_sb == 0) {
-- /* Unlink of the URB currently being transmitted. */
-- prev_sb = 0;
-- iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
-- }
--
-- while (iter_sb && (iter_sb != urb_priv->last_sb)) {
-- iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
-- }
-- if (iter_sb) {
-- next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
-- } else {
-- /* This should only happen if the DMA has completed
-- processing the SB list for this EP while interrupts
-- are disabled. */
-- dbg_isoc("Isoc urb not found, already sent?");
-- next_sb = 0;
-- }
-- if (prev_sb) {
-- prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0;
-- } else {
-- TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0;
-- }
--
-- etrax_remove_from_sb_list(urb);
-- if (urb_list_empty(epid)) {
-- TxIsocEPList[epid].sub = 0;
-- dbg_isoc("Last isoc out urb epid %d", epid);
-- } else if (next_sb || prev_sb) {
-- dbg_isoc("Re-enable isoc out epid %d", epid);
--
-- TxIsocEPList[epid].hw_len = 0;
-- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-- } else {
-- TxIsocEPList[epid].sub = 0;
-- dbg_isoc("URB list non-empty and no SB list, EP disabled");
-- }
-- } else {
-- dbg_isoc("Urb 0x%p not found, completed already?", urb);
-- }
-- } else {
--
-- urb_list_del(urb, epid);
--
-- /* For in traffic there is only one SB descriptor for each EP even
-- though there may be several urbs (all urbs point at the same SB). */
-- if (urb_list_empty(epid)) {
-- /* No more urbs, remove the SB. */
-- TxIsocEPList[epid].sub = 0;
-- etrax_remove_from_sb_list(urb);
-- } else {
-- TxIsocEPList[epid].hw_len = 0;
-- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-- }
-- }
-- /* Release allocated bandwidth. */
-- usb_release_bandwidth(urb->dev, urb, 1);
-- }
-- /* Free the epid if urb list is empty. */
-- if (urb_list_empty(epid)) {
-- etrax_usb_free_epid(epid);
-- }
-- restore_flags(flags);
--
-- /* Must be done before calling completion handler. */
-- kfree(urb_priv);
-- urb->hcpriv = 0;
--
-- if (urb->complete) {
-- urb->complete(urb, NULL);
-- }
--
-- DBFEXIT;
-- return 0;
--}
--
--static int etrax_usb_get_frame_number(struct usb_device *usb_dev)
--{
-- DBFENTER;
-- DBFEXIT;
-- return (*R_USB_FM_NUMBER & 0x7ff);
--}
--
--static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc)
--{
-- DBFENTER;
--
-- /* This interrupt handler could be used when unlinking EP descriptors. */
--
-- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) {
-- USB_EP_Desc_t *ep;
--
-- //dbg_bulk("dma8_sub0_descr (BULK) intr.");
--
-- /* It should be safe clearing the interrupt here, since we don't expect to get a new
-- one until we restart the bulk channel. */
-- *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do);
--
-- /* Wait while the DMA is running (though we don't expect it to be). */
-- while (*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd));
--
-- /* Advance the DMA to the next EP descriptor. */
-- ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
--
-- //dbg_bulk("descr intr: DMA is at 0x%lx", (unsigned long)ep);
--
-- /* ep->next is already a physical address; no need for a virt_to_phys. */
-- *R_DMA_CH8_SUB0_EP = ep->next;
--
-- /* Start the DMA bulk channel again. */
-- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
-- }
-- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) {
-- struct urb *urb;
-- int epid;
-- etrax_urb_priv_t *urb_priv;
-- unsigned long int flags;
--
-- dbg_ctrl("dma8_sub1_descr (CTRL) intr.");
-- *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do);
--
-- /* The complete callback gets called so we cli. */
-- save_flags(flags);
-- cli();
--
-- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
-- if ((TxCtrlEPList[epid].sub == 0) ||
-- (epid == DUMMY_EPID) ||
-- (epid == INVALID_EPID)) {
-- /* Nothing here to see. */
-- continue;
-- }
--
-- /* Get the first urb (if any). */
-- urb = urb_list_first(epid);
--
-- if (urb) {
--
-- /* Sanity check. */
-- assert(usb_pipetype(urb->pipe) == PIPE_CONTROL);
--
-- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- assert(urb_priv);
--
-- if (urb_priv->urb_state == WAITING_FOR_DESCR_INTR) {
-- assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
--
-- etrax_usb_complete_urb(urb, 0);
-- }
-- }
-- }
-- restore_flags(flags);
-- }
-- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) {
-- dbg_intr("dma8_sub2_descr (INTR) intr.");
-- *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do);
-- }
-- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) {
-- struct urb *urb;
-- int epid;
-- int epid_done;
-- etrax_urb_priv_t *urb_priv;
-- USB_SB_Desc_t *sb_desc;
--
-- usb_isoc_complete_data_t *comp_data = NULL;
--
-- /* One or more isoc out transfers are done. */
-- dbg_isoc("dma8_sub3_descr (ISOC) intr.");
--
-- /* For each isoc out EP search for the first sb_desc with the intr flag
-- set. This descriptor must be the last packet from an URB. Then
-- traverse the URB list for the EP until the URB with urb_priv->last_sb
-- matching the intr-marked sb_desc is found. All URBs before this have
-- been sent.
-- */
--
-- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
-- /* Skip past epids with no SB lists, epids used for in traffic,
-- and special (dummy, invalid) epids. */
-- if ((TxIsocEPList[epid].sub == 0) ||
-- (test_bit(epid, (void *)&epid_out_traffic) == 0) ||
-- (epid == DUMMY_EPID) ||
-- (epid == INVALID_EPID)) {
-- /* Nothing here to see. */
-- continue;
-- }
-- sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
--
-- /* Find the last descriptor of the currently active URB for this ep.
-- This is the first descriptor in the sub list marked for a descriptor
-- interrupt. */
-- while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) {
-- sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0;
-- }
-- assert(sb_desc);
--
-- dbg_isoc("Check epid %d, sub 0x%p, SB 0x%p",
-- epid,
-- phys_to_virt(TxIsocEPList[epid].sub),
-- sb_desc);
--
-- epid_done = 0;
--
-- /* Get the first urb (if any). */
-- urb = urb_list_first(epid);
-- assert(urb);
--
-- while (urb && !epid_done) {
--
-- /* Sanity check. */
-- assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
--
-- if (!usb_pipeout(urb->pipe)) {
-- /* descr interrupts are generated only for out pipes. */
-- epid_done = 1;
-- continue;
-- }
--
-- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- assert(urb_priv);
--
-- if (sb_desc != urb_priv->last_sb) {
--
-- /* This urb has been sent. */
-- dbg_isoc("out URB 0x%p sent", urb);
--
-- urb_priv->urb_state = TRANSFER_DONE;
--
-- } else if ((sb_desc == urb_priv->last_sb) &&
-- !(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
--
-- assert((sb_desc->command & IO_MASK(USB_SB_command, eol)) == IO_STATE(USB_SB_command, eol, yes));
-- assert(sb_desc->next == 0);
--
-- dbg_isoc("out URB 0x%p last in list, epid disabled", urb);
-- TxIsocEPList[epid].sub = 0;
-- TxIsocEPList[epid].hw_len = 0;
-- urb_priv->urb_state = TRANSFER_DONE;
--
-- epid_done = 1;
--
-- } else {
-- epid_done = 1;
-- }
-- if (!epid_done) {
-- urb = urb_list_next(urb, epid);
-- }
-- }
--
-- }
--
-- *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do);
--
-- comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC);
-- assert(comp_data != NULL);
--
-- INIT_WORK(&comp_data->usb_bh, etrax_usb_isoc_descr_interrupt_bottom_half, comp_data);
-- schedule_work(&comp_data->usb_bh);
-- }
--
-- DBFEXIT;
-- return IRQ_HANDLED;
--}
--
--static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data)
--{
-- usb_isoc_complete_data_t *comp_data = (usb_isoc_complete_data_t*)data;
--
-- struct urb *urb;
-- int epid;
-- int epid_done;
-- etrax_urb_priv_t *urb_priv;
--
-- DBFENTER;
--
-- dbg_isoc("dma8_sub3_descr (ISOC) bottom half.");
--
-- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
-- unsigned long flags;
--
-- save_flags(flags);
-- cli();
--
-- epid_done = 0;
--
-- /* The descriptor interrupt handler has marked all transmitted isoch. out
-- URBs with TRANSFER_DONE. Now we traverse all epids and for all that
-- have isoch. out traffic traverse its URB list and complete the
-- transmitted URB.
-- */
--
-- while (!epid_done) {
--
-- /* Get the first urb (if any). */
-- urb = urb_list_first(epid);
-- if (urb == 0) {
-- epid_done = 1;
-- continue;
-- }
--
-- if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) {
-- epid_done = 1;
-- continue;
-- }
--
-- if (!usb_pipeout(urb->pipe)) {
-- /* descr interrupts are generated only for out pipes. */
-- epid_done = 1;
-- continue;
-- }
--
-- dbg_isoc("Check epid %d, SB 0x%p", epid, (char*)TxIsocEPList[epid].sub);
--
-- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- assert(urb_priv);
--
-- if (urb_priv->urb_state == TRANSFER_DONE) {
-- int i;
-- struct usb_iso_packet_descriptor *packet;
--
-- /* This urb has been sent. */
-- dbg_isoc("Completing isoc out URB 0x%p", urb);
--
-- for (i = 0; i < urb->number_of_packets; i++) {
-- packet = &urb->iso_frame_desc[i];
-- packet->status = 0;
-- packet->actual_length = packet->length;
-- }
--
-- etrax_usb_complete_isoc_urb(urb, 0);
--
-- if (urb_list_empty(epid)) {
-- etrax_usb_free_epid(epid);
-- epid_done = 1;
-- }
-- } else {
-- epid_done = 1;
-- }
-- }
-- restore_flags(flags);
--
-- }
-- kmem_cache_free(isoc_compl_cache, comp_data);
--
-- DBFEXIT;
--}
--
--
--
--static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc)
--{
-- struct urb *urb;
-- etrax_urb_priv_t *urb_priv;
-- int epid = 0;
-- unsigned long flags;
--
-- /* Isoc diagnostics. */
-- static int curr_fm = 0;
-- static int prev_fm = 0;
--
-- DBFENTER;
--
-- /* Clear this interrupt. */
-- *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do);
--
-- /* Note that this while loop assumes that all packets span only
-- one rx descriptor. */
--
-- /* The reason we cli here is that we call the driver's callback functions. */
-- save_flags(flags);
-- cli();
--
-- while (myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) {
--
-- epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status);
-- urb = urb_list_first(epid);
--
-- //printk("eop for epid %d, first urb 0x%lx\n", epid, (unsigned long)urb);
--
-- if (!urb) {
-- err("No urb for epid %d in rx interrupt", epid);
-- __dump_ept_data(epid);
-- goto skip_out;
-- }
--
-- /* Note that we cannot indescriminately assert(usb_pipein(urb->pipe)) since
-- ctrl pipes are not. */
--
-- if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) {
-- __u32 r_usb_ept_data;
-- int no_error = 0;
--
-- assert(test_bit(epid, (void *)&epid_usage_bitmask));
--
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-- nop();
-- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-- r_usb_ept_data = *R_USB_EPT_DATA_ISO;
--
-- if ((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) &&
-- (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) &&
-- (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) {
-- /* Not an error, just a failure to receive an expected iso
-- in packet in this frame. This is not documented
-- in the designers reference.
-- */
-- no_error++;
-- } else {
-- warn("R_USB_EPT_DATA_ISO for epid %d = 0x%x", epid, r_usb_ept_data);
-- }
-- } else {
-- r_usb_ept_data = *R_USB_EPT_DATA;
-- warn("R_USB_EPT_DATA for epid %d = 0x%x", epid, r_usb_ept_data);
-- }
--
-- if (!no_error){
-- warn("error in rx desc->status, epid %d, first urb = 0x%lx",
-- epid, (unsigned long)urb);
-- __dump_in_desc(myNextRxDesc);
--
-- warn("R_USB_STATUS = 0x%x", *R_USB_STATUS);
--
-- /* Check that ept was disabled when error occurred. */
-- switch (usb_pipetype(urb->pipe)) {
-- case PIPE_BULK:
-- assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-- break;
-- case PIPE_CONTROL:
-- assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-- break;
-- case PIPE_INTERRUPT:
-- assert(!(TxIntrEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-- break;
-- case PIPE_ISOCHRONOUS:
-- assert(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-- break;
-- default:
-- warn("etrax_usb_rx_interrupt: bad pipetype %d in urb 0x%p",
-- usb_pipetype(urb->pipe),
-- urb);
-- }
-- etrax_usb_complete_urb(urb, -EPROTO);
-- goto skip_out;
-- }
-- }
--
-- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- assert(urb_priv);
--
-- if ((usb_pipetype(urb->pipe) == PIPE_BULK) ||
-- (usb_pipetype(urb->pipe) == PIPE_CONTROL) ||
-- (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
--
-- if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
-- /* We get nodata for empty data transactions, and the rx descriptor's
-- hw_len field is not valid in that case. No data to copy in other
-- words. */
-- } else {
-- /* Make sure the data fits in the buffer. */
-- assert(urb_priv->rx_offset + myNextRxDesc->hw_len
-- <= urb->transfer_buffer_length);
--
-- memcpy(urb->transfer_buffer + urb_priv->rx_offset,
-- phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len);
-- urb_priv->rx_offset += myNextRxDesc->hw_len;
-- }
--
-- if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) {
-- if ((usb_pipetype(urb->pipe) == PIPE_CONTROL) &&
-- ((TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)) ==
-- IO_STATE(USB_EP_command, enable, yes))) {
-- /* The EP is still enabled, so the OUT packet used to ack
-- the in data is probably not processed yet. If the EP
-- sub pointer has not moved beyond urb_priv->last_sb mark
-- it for a descriptor interrupt and complete the urb in
-- the descriptor interrupt handler.
-- */
-- USB_SB_Desc_t *sub = TxCtrlEPList[urb_priv->epid].sub ? phys_to_virt(TxCtrlEPList[urb_priv->epid].sub) : 0;
--
-- while ((sub != NULL) && (sub != urb_priv->last_sb)) {
-- sub = sub->next ? phys_to_virt(sub->next) : 0;
-- }
-- if (sub != NULL) {
-- /* The urb has not been fully processed. */
-- urb_priv->urb_state = WAITING_FOR_DESCR_INTR;
-- } else {
-- warn("(CTRL) epid enabled and urb (0x%p) processed, ep->sub=0x%p", urb, (char*)TxCtrlEPList[urb_priv->epid].sub);
-- etrax_usb_complete_urb(urb, 0);
-- }
-- } else {
-- etrax_usb_complete_urb(urb, 0);
-- }
-- }
--
-- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
--
-- struct usb_iso_packet_descriptor *packet;
--
-- if (urb_priv->urb_state == UNLINK) {
-- info("Ignoring rx data for urb being unlinked.");
-- goto skip_out;
-- } else if (urb_priv->urb_state == NOT_STARTED) {
-- info("What? Got rx data for urb that isn't started?");
-- goto skip_out;
-- }
--
-- packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter];
-- packet->status = 0;
--
-- if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
-- /* We get nodata for empty data transactions, and the rx descriptor's
-- hw_len field is not valid in that case. We copy 0 bytes however to
-- stay in synch. */
-- packet->actual_length = 0;
-- } else {
-- packet->actual_length = myNextRxDesc->hw_len;
-- /* Make sure the data fits in the buffer. */
-- assert(packet->actual_length <= packet->length);
-- memcpy(urb->transfer_buffer + packet->offset,
-- phys_to_virt(myNextRxDesc->buf), packet->actual_length);
-- }
--
-- /* Increment the packet counter. */
-- urb_priv->isoc_packet_counter++;
--
-- /* Note that we don't care about the eot field in the rx descriptor's status.
-- It will always be set for isoc traffic. */
-- if (urb->number_of_packets == urb_priv->isoc_packet_counter) {
--
-- /* Out-of-synch diagnostics. */
-- curr_fm = (*R_USB_FM_NUMBER & 0x7ff);
-- if (((prev_fm + urb_priv->isoc_packet_counter) % (0x7ff + 1)) != curr_fm) {
-- /* This test is wrong, if there is more than one isoc
-- in endpoint active it will always calculate wrong
-- since prev_fm is shared by all endpoints.
--
-- FIXME Make this check per URB using urb->start_frame.
-- */
-- dbg_isoc("Out of synch? Previous frame = %d, current frame = %d",
-- prev_fm, curr_fm);
--
-- }
-- prev_fm = curr_fm;
--
-- /* Complete the urb with status OK. */
-- etrax_usb_complete_isoc_urb(urb, 0);
-- }
-- }
--
-- skip_out:
--
-- /* DMA IN cache bug. Flush the DMA IN buffer from the cache. (struct etrax_dma_descr
-- has the same layout as USB_IN_Desc for the relevant fields.) */
-- prepare_rx_descriptor((struct etrax_dma_descr*)myNextRxDesc);
--
-- myPrevRxDesc = myNextRxDesc;
-- myPrevRxDesc->command |= IO_MASK(USB_IN_command, eol);
-- myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol);
-- myLastRxDesc = myPrevRxDesc;
--
-- myNextRxDesc->status = 0;
-- myNextRxDesc = phys_to_virt(myNextRxDesc->next);
-- }
--
-- restore_flags(flags);
--
-- DBFEXIT;
--
-- return IRQ_HANDLED;
--}
--
--
--/* This function will unlink the SB descriptors associated with this urb. */
--static int etrax_remove_from_sb_list(struct urb *urb)
--{
-- USB_SB_Desc_t *next_sb, *first_sb, *last_sb;
-- etrax_urb_priv_t *urb_priv;
-- int i = 0;
--
-- DBFENTER;
--
-- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- assert(urb_priv);
--
-- /* Just a sanity check. Since we don't fiddle with the DMA list the EP descriptor
-- doesn't really need to be disabled, it's just that we expect it to be. */
-- if (usb_pipetype(urb->pipe) == PIPE_BULK) {
-- assert(!(TxBulkEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
-- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-- assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)));
-- }
--
-- first_sb = urb_priv->first_sb;
-- last_sb = urb_priv->last_sb;
--
-- assert(first_sb);
-- assert(last_sb);
--
-- while (first_sb != last_sb) {
-- next_sb = (USB_SB_Desc_t *)phys_to_virt(first_sb->next);
-- kmem_cache_free(usb_desc_cache, first_sb);
-- first_sb = next_sb;
-- i++;
-- }
-- kmem_cache_free(usb_desc_cache, last_sb);
-- i++;
-- dbg_sb("%d SB descriptors freed", i);
-- /* Compare i with urb->number_of_packets for Isoc traffic.
-- Should be same when calling unlink_urb */
--
-- DBFEXIT;
--
-- return i;
--}
--
--static int etrax_usb_submit_bulk_urb(struct urb *urb)
--{
-- int epid;
-- int empty;
-- unsigned long flags;
-- etrax_urb_priv_t *urb_priv;
--
-- DBFENTER;
--
-- /* Epid allocation, empty check and list add must be protected.
-- Read about this in etrax_usb_submit_ctrl_urb. */
--
-- spin_lock_irqsave(&urb_list_lock, flags);
-- epid = etrax_usb_setup_epid(urb);
-- if (epid == -1) {
-- DBFEXIT;
-- spin_unlock_irqrestore(&urb_list_lock, flags);
-- return -ENOMEM;
-- }
-- empty = urb_list_empty(epid);
-- urb_list_add(urb, epid);
-- spin_unlock_irqrestore(&urb_list_lock, flags);
--
-- dbg_bulk("Adding bulk %s urb 0x%lx to %s list, epid %d",
-- usb_pipein(urb->pipe) ? "IN" : "OUT", (unsigned long)urb, empty ? "empty" : "", epid);
--
-- /* Mark the urb as being in progress. */
-- urb->status = -EINPROGRESS;
--
-- /* Setup the hcpriv data. */
-- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
-- assert(urb_priv != NULL);
-- /* This sets rx_offset to 0. */
-- urb_priv->urb_state = NOT_STARTED;
-- urb->hcpriv = urb_priv;
--
-- if (empty) {
-- etrax_usb_add_to_bulk_sb_list(urb, epid);
-- }
--
-- DBFEXIT;
--
-- return 0;
--}
--
--static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid)
--{
-- USB_SB_Desc_t *sb_desc;
-- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- unsigned long flags;
-- char maxlen;
--
-- DBFENTER;
--
-- dbg_bulk("etrax_usb_add_to_bulk_sb_list, urb 0x%lx", (unsigned long)urb);
--
-- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
--
-- sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
-- assert(sb_desc != NULL);
-- memset(sb_desc, 0, sizeof(USB_SB_Desc_t));
--
--
-- if (usb_pipeout(urb->pipe)) {
--
-- dbg_bulk("Grabbing bulk OUT, urb 0x%lx, epid %d", (unsigned long)urb, epid);
--
-- /* This is probably a sanity check of the bulk transaction length
-- not being larger than 64 kB. */
-- if (urb->transfer_buffer_length > 0xffff) {
-- panic("urb->transfer_buffer_length > 0xffff");
-- }
--
-- sb_desc->sw_len = urb->transfer_buffer_length;
--
-- /* The rem field is don't care if it's not a full-length transfer, so setting
-- it shouldn't hurt. Also, rem isn't used for OUT traffic. */
-- sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) |
-- IO_STATE(USB_SB_command, tt, out) |
-- IO_STATE(USB_SB_command, eot, yes) |
-- IO_STATE(USB_SB_command, eol, yes));
--
-- /* The full field is set to yes, even if we don't actually check that this is
-- a full-length transfer (i.e., that transfer_buffer_length % maxlen = 0).
-- Setting full prevents the USB controller from sending an empty packet in
-- that case. However, if URB_ZERO_PACKET was set we want that. */
-- if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
-- sb_desc->command |= IO_STATE(USB_SB_command, full, yes);
-- }
--
-- sb_desc->buf = virt_to_phys(urb->transfer_buffer);
-- sb_desc->next = 0;
--
-- } else if (usb_pipein(urb->pipe)) {
--
-- dbg_bulk("Grabbing bulk IN, urb 0x%lx, epid %d", (unsigned long)urb, epid);
--
-- sb_desc->sw_len = urb->transfer_buffer_length ?
-- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
--
-- /* The rem field is don't care if it's not a full-length transfer, so setting
-- it shouldn't hurt. */
-- sb_desc->command =
-- (IO_FIELD(USB_SB_command, rem,
-- urb->transfer_buffer_length % maxlen) |
-- IO_STATE(USB_SB_command, tt, in) |
-- IO_STATE(USB_SB_command, eot, yes) |
-- IO_STATE(USB_SB_command, eol, yes));
--
-- sb_desc->buf = 0;
-- sb_desc->next = 0;
-- }
--
-- urb_priv->first_sb = sb_desc;
-- urb_priv->last_sb = sb_desc;
-- urb_priv->epid = epid;
--
-- urb->hcpriv = urb_priv;
--
-- /* Reset toggle bits and reset error count. */
-- save_flags(flags);
-- cli();
--
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-- nop();
--
-- /* FIXME: Is this a special case since the hold field is checked,
-- or should we check hold in a lot of other cases as well? */
-- if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) {
-- panic("Hold was set in %s", __FUNCTION__);
-- }
--
-- /* Reset error counters (regardless of which direction this traffic is). */
-- *R_USB_EPT_DATA &=
-- ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
-- IO_MASK(R_USB_EPT_DATA, error_count_out));
--
-- /* Software must preset the toggle bits. */
-- if (usb_pipeout(urb->pipe)) {
-- char toggle =
-- usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
-- *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out);
-- *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle);
-- } else {
-- char toggle =
-- usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe));
-- *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in);
-- *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle);
-- }
--
-- /* Assert that the EP descriptor is disabled. */
-- assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
--
-- /* The reason we set the EP's sub pointer directly instead of
-- walking the SB list and linking it last in the list is that we only
-- have one active urb at a time (the rest are queued). */
--
-- /* Note that we cannot have interrupts running when we have set the SB descriptor
-- but the EP is not yet enabled. If a bulk eot happens for another EP, we will
-- find this EP disabled and with a SB != 0, which will make us think that it's done. */
-- TxBulkEPList[epid].sub = virt_to_phys(sb_desc);
-- TxBulkEPList[epid].hw_len = 0;
-- /* Note that we don't have to fill in the ep_id field since this
-- was done when we allocated the EP descriptors in init_tx_bulk_ep. */
--
-- /* Check if the dummy list is already with us (if several urbs were queued). */
-- if (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0])) {
--
-- dbg_bulk("Inviting dummy list to the party for urb 0x%lx, epid %d",
-- (unsigned long)urb, epid);
--
-- /* The last EP in the dummy list already has its next pointer set to
-- TxBulkEPList[epid].next. */
--
-- /* We don't need to check if the DMA is at this EP or not before changing the
-- next pointer, since we will do it in one 32-bit write (EP descriptors are
-- 32-bit aligned). */
-- TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]);
-- }
-- /* Enable the EP descr. */
-- dbg_bulk("Enabling bulk EP for urb 0x%lx, epid %d", (unsigned long)urb, epid);
-- TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
--
-- /* Everything is set up, safe to enable interrupts again. */
-- restore_flags(flags);
--
-- /* If the DMA bulk channel isn't running, we need to restart it if it
-- has stopped at the last EP descriptor (DMA stopped because there was
-- no more traffic) or if it has stopped at a dummy EP with the intr flag
-- set (DMA stopped because we were too slow in inserting new traffic). */
-- if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
--
-- USB_EP_Desc_t *ep;
-- ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
-- dbg_bulk("DMA channel not running in add");
-- dbg_bulk("DMA is at 0x%lx", (unsigned long)ep);
--
-- if (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[NBR_OF_EPIDS - 1]) ||
-- (ep->command & 0x8) >> 3) {
-- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
-- /* Update/restart the bulk start timer since we just started the channel. */
-- mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
-- /* Update/restart the bulk eot timer since we just inserted traffic. */
-- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-- }
-- }
--
-- DBFEXIT;
--}
--
--static void etrax_usb_complete_bulk_urb(struct urb *urb, int status)
--{
-- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- int epid = urb_priv->epid;
-- unsigned long flags;
--
-- DBFENTER;
--
-- if (status)
-- warn("Completing bulk urb with status %d.", status);
--
-- dbg_bulk("Completing bulk urb 0x%lx for epid %d", (unsigned long)urb, epid);
--
-- /* Update the urb list. */
-- urb_list_del(urb, epid);
--
-- /* For an IN pipe, we always set the actual length, regardless of whether there was
-- an error or not (which means the device driver can use the data if it wants to). */
-- if (usb_pipein(urb->pipe)) {
-- urb->actual_length = urb_priv->rx_offset;
-- } else {
-- /* Set actual_length for OUT urbs also; the USB mass storage driver seems
-- to want that. We wouldn't know of any partial writes if there was an error. */
-- if (status == 0) {
-- urb->actual_length = urb->transfer_buffer_length;
-- } else {
-- urb->actual_length = 0;
-- }
-- }
--
-- /* FIXME: Is there something of the things below we shouldn't do if there was an error?
-- Like, maybe we shouldn't toggle the toggle bits, or maybe we shouldn't insert more traffic. */
--
-- save_flags(flags);
-- cli();
--
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-- nop();
--
-- /* We need to fiddle with the toggle bits because the hardware doesn't do it for us. */
-- if (usb_pipeout(urb->pipe)) {
-- char toggle =
-- IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA);
-- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-- usb_pipeout(urb->pipe), toggle);
-- } else {
-- char toggle =
-- IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA);
-- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-- usb_pipeout(urb->pipe), toggle);
-- }
-- restore_flags(flags);
--
-- /* Remember to free the SBs. */
-- etrax_remove_from_sb_list(urb);
-- kfree(urb_priv);
-- urb->hcpriv = 0;
--
-- /* If there are any more urb's in the list we'd better start sending */
-- if (!urb_list_empty(epid)) {
--
-- struct urb *new_urb;
--
-- /* Get the first urb. */
-- new_urb = urb_list_first(epid);
-- assert(new_urb);
--
-- dbg_bulk("More bulk for epid %d", epid);
--
-- etrax_usb_add_to_bulk_sb_list(new_urb, epid);
-- }
--
-- urb->status = status;
--
-- /* We let any non-zero status from the layer above have precedence. */
-- if (status == 0) {
-- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
-- is to be treated as an error. */
-- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
-- if (usb_pipein(urb->pipe) &&
-- (urb->actual_length !=
-- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) {
-- urb->status = -EREMOTEIO;
-- }
-- }
-- }
--
-- if (urb->complete) {
-- urb->complete(urb, NULL);
-- }
--
-- if (urb_list_empty(epid)) {
-- /* This means that this EP is now free, deconfigure it. */
-- etrax_usb_free_epid(epid);
--
-- /* No more traffic; time to clean up.
-- Must set sub pointer to 0, since we look at the sub pointer when handling
-- the bulk eot interrupt. */
--
-- dbg_bulk("No bulk for epid %d", epid);
--
-- TxBulkEPList[epid].sub = 0;
--
-- /* Unlink the dummy list. */
--
-- dbg_bulk("Kicking dummy list out of party for urb 0x%lx, epid %d",
-- (unsigned long)urb, epid);
--
-- /* No need to wait for the DMA before changing the next pointer.
-- The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use
-- the last one (INVALID_EPID) for actual traffic. */
-- TxBulkEPList[epid].next =
-- virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
-- }
--
-- DBFEXIT;
--}
--
--static int etrax_usb_submit_ctrl_urb(struct urb *urb)
--{
-- int epid;
-- int empty;
-- unsigned long flags;
-- etrax_urb_priv_t *urb_priv;
--
-- DBFENTER;
--
-- /* FIXME: Return -ENXIO if there is already a queued urb for this endpoint? */
--
-- /* Epid allocation, empty check and list add must be protected.
--
-- Epid allocation because if we find an existing epid for this endpoint an urb might be
-- completed (emptying the list) before we add the new urb to the list, causing the epid
-- to be de-allocated. We would then start the transfer with an invalid epid -> epid attn.
--
-- Empty check and add because otherwise we might conclude that the list is not empty,
-- after which it becomes empty before we add the new urb to the list, causing us not to
-- insert the new traffic into the SB list. */
--
-- spin_lock_irqsave(&urb_list_lock, flags);
-- epid = etrax_usb_setup_epid(urb);
-- if (epid == -1) {
-- spin_unlock_irqrestore(&urb_list_lock, flags);
-- DBFEXIT;
-- return -ENOMEM;
-- }
-- empty = urb_list_empty(epid);
-- urb_list_add(urb, epid);
-- spin_unlock_irqrestore(&urb_list_lock, flags);
--
-- dbg_ctrl("Adding ctrl urb 0x%lx to %s list, epid %d",
-- (unsigned long)urb, empty ? "empty" : "", epid);
--
-- /* Mark the urb as being in progress. */
-- urb->status = -EINPROGRESS;
--
-- /* Setup the hcpriv data. */
-- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
-- assert(urb_priv != NULL);
-- /* This sets rx_offset to 0. */
-- urb_priv->urb_state = NOT_STARTED;
-- urb->hcpriv = urb_priv;
--
-- if (empty) {
-- etrax_usb_add_to_ctrl_sb_list(urb, epid);
-- }
--
-- DBFEXIT;
--
-- return 0;
--}
--
--static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid)
--{
-- USB_SB_Desc_t *sb_desc_setup;
-- USB_SB_Desc_t *sb_desc_data;
-- USB_SB_Desc_t *sb_desc_status;
--
-- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
--
-- unsigned long flags;
-- char maxlen;
--
-- DBFENTER;
--
-- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
--
-- sb_desc_setup = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
-- assert(sb_desc_setup != NULL);
-- sb_desc_status = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
-- assert(sb_desc_status != NULL);
--
-- /* Initialize the mandatory setup SB descriptor (used only in control transfers) */
-- sb_desc_setup->sw_len = 8;
-- sb_desc_setup->command = (IO_FIELD(USB_SB_command, rem, 0) |
-- IO_STATE(USB_SB_command, tt, setup) |
-- IO_STATE(USB_SB_command, full, yes) |
-- IO_STATE(USB_SB_command, eot, yes));
--
-- sb_desc_setup->buf = virt_to_phys(urb->setup_packet);
--
-- if (usb_pipeout(urb->pipe)) {
-- dbg_ctrl("Transfer for epid %d is OUT", epid);
--
-- /* If this Control OUT transfer has an optional data stage we add an OUT token
-- before the mandatory IN (status) token, hence the reordered SB list */
--
-- sb_desc_setup->next = virt_to_phys(sb_desc_status);
-- if (urb->transfer_buffer) {
--
-- dbg_ctrl("This OUT transfer has an extra data stage");
--
-- sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
-- assert(sb_desc_data != NULL);
--
-- sb_desc_setup->next = virt_to_phys(sb_desc_data);
--
-- sb_desc_data->sw_len = urb->transfer_buffer_length;
-- sb_desc_data->command = (IO_STATE(USB_SB_command, tt, out) |
-- IO_STATE(USB_SB_command, full, yes) |
-- IO_STATE(USB_SB_command, eot, yes));
-- sb_desc_data->buf = virt_to_phys(urb->transfer_buffer);
-- sb_desc_data->next = virt_to_phys(sb_desc_status);
-- }
--
-- sb_desc_status->sw_len = 1;
-- sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) |
-- IO_STATE(USB_SB_command, tt, in) |
-- IO_STATE(USB_SB_command, eot, yes) |
-- IO_STATE(USB_SB_command, intr, yes) |
-- IO_STATE(USB_SB_command, eol, yes));
--
-- sb_desc_status->buf = 0;
-- sb_desc_status->next = 0;
--
-- } else if (usb_pipein(urb->pipe)) {
--
-- dbg_ctrl("Transfer for epid %d is IN", epid);
-- dbg_ctrl("transfer_buffer_length = %d", urb->transfer_buffer_length);
-- dbg_ctrl("rem is calculated to %d", urb->transfer_buffer_length % maxlen);
--
-- sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
-- assert(sb_desc_data != NULL);
--
-- sb_desc_setup->next = virt_to_phys(sb_desc_data);
--
-- sb_desc_data->sw_len = urb->transfer_buffer_length ?
-- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
-- dbg_ctrl("sw_len got %d", sb_desc_data->sw_len);
--
-- sb_desc_data->command =
-- (IO_FIELD(USB_SB_command, rem,
-- urb->transfer_buffer_length % maxlen) |
-- IO_STATE(USB_SB_command, tt, in) |
-- IO_STATE(USB_SB_command, eot, yes));
--
-- sb_desc_data->buf = 0;
-- sb_desc_data->next = virt_to_phys(sb_desc_status);
--
-- /* Read comment at zout_buffer declaration for an explanation to this. */
-- sb_desc_status->sw_len = 1;
-- sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) |
-- IO_STATE(USB_SB_command, tt, zout) |
-- IO_STATE(USB_SB_command, full, yes) |
-- IO_STATE(USB_SB_command, eot, yes) |
-- IO_STATE(USB_SB_command, intr, yes) |
-- IO_STATE(USB_SB_command, eol, yes));
--
-- sb_desc_status->buf = virt_to_phys(&zout_buffer[0]);
-- sb_desc_status->next = 0;
-- }
--
-- urb_priv->first_sb = sb_desc_setup;
-- urb_priv->last_sb = sb_desc_status;
-- urb_priv->epid = epid;
--
-- urb_priv->urb_state = STARTED;
--
-- /* Reset toggle bits and reset error count, remember to di and ei */
-- /* Warning: it is possible that this locking doesn't work with bottom-halves */
--
-- save_flags(flags);
-- cli();
--
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-- nop();
-- if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) {
-- panic("Hold was set in %s", __FUNCTION__);
-- }
--
--
-- /* FIXME: Compare with etrax_usb_add_to_bulk_sb_list where the toggle bits
-- are set to a specific value. Why the difference? Read "Transfer and Toggle Bits
-- in Designer's Reference, p. 8 - 11. */
-- *R_USB_EPT_DATA &=
-- ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
-- IO_MASK(R_USB_EPT_DATA, error_count_out) |
-- IO_MASK(R_USB_EPT_DATA, t_in) |
-- IO_MASK(R_USB_EPT_DATA, t_out));
--
-- /* Since we use the rx interrupt to complete ctrl urbs, we can enable interrupts now
-- (i.e. we don't check the sub pointer on an eot interrupt like we do for bulk traffic). */
-- restore_flags(flags);
--
-- /* Assert that the EP descriptor is disabled. */
-- assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
--
-- /* Set up and enable the EP descriptor. */
-- TxCtrlEPList[epid].sub = virt_to_phys(sb_desc_setup);
-- TxCtrlEPList[epid].hw_len = 0;
-- TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
--
-- /* We start the DMA sub channel without checking if it's running or not, because:
-- 1) If it's already running, issuing the start command is a nop.
-- 2) We avoid a test-and-set race condition. */
-- *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
--
-- DBFEXIT;
--}
--
--static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status)
--{
-- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- int epid = urb_priv->epid;
--
-- DBFENTER;
--
-- if (status)
-- warn("Completing ctrl urb with status %d.", status);
--
-- dbg_ctrl("Completing ctrl epid %d, urb 0x%lx", epid, (unsigned long)urb);
--
-- /* Remove this urb from the list. */
-- urb_list_del(urb, epid);
--
-- /* For an IN pipe, we always set the actual length, regardless of whether there was
-- an error or not (which means the device driver can use the data if it wants to). */
-- if (usb_pipein(urb->pipe)) {
-- urb->actual_length = urb_priv->rx_offset;
-- }
--
-- /* FIXME: Is there something of the things below we shouldn't do if there was an error?
-- Like, maybe we shouldn't insert more traffic. */
--
-- /* Remember to free the SBs. */
-- etrax_remove_from_sb_list(urb);
-- kfree(urb_priv);
-- urb->hcpriv = 0;
--
-- /* If there are any more urbs in the list we'd better start sending. */
-- if (!urb_list_empty(epid)) {
-- struct urb *new_urb;
--
-- /* Get the first urb. */
-- new_urb = urb_list_first(epid);
-- assert(new_urb);
--
-- dbg_ctrl("More ctrl for epid %d, first urb = 0x%lx", epid, (unsigned long)new_urb);
--
-- etrax_usb_add_to_ctrl_sb_list(new_urb, epid);
-- }
--
-- urb->status = status;
--
-- /* We let any non-zero status from the layer above have precedence. */
-- if (status == 0) {
-- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
-- is to be treated as an error. */
-- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
-- if (usb_pipein(urb->pipe) &&
-- (urb->actual_length !=
-- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) {
-- urb->status = -EREMOTEIO;
-- }
-- }
-- }
--
-- if (urb->complete) {
-- urb->complete(urb, NULL);
-- }
--
-- if (urb_list_empty(epid)) {
-- /* No more traffic. Time to clean up. */
-- etrax_usb_free_epid(epid);
-- /* Must set sub pointer to 0. */
-- dbg_ctrl("No ctrl for epid %d", epid);
-- TxCtrlEPList[epid].sub = 0;
-- }
--
-- DBFEXIT;
--}
--
--static int etrax_usb_submit_intr_urb(struct urb *urb)
--{
--
-- int epid;
--
-- DBFENTER;
--
-- if (usb_pipeout(urb->pipe)) {
-- /* Unsupported transfer type.
-- We don't support interrupt out traffic. (If we do, we can't support
-- intervals for neither in or out traffic, but are forced to schedule all
-- interrupt traffic in one frame.) */
-- return -EINVAL;
-- }
--
-- epid = etrax_usb_setup_epid(urb);
-- if (epid == -1) {
-- DBFEXIT;
-- return -ENOMEM;
-- }
--
-- if (!urb_list_empty(epid)) {
-- /* There is already a queued urb for this endpoint. */
-- etrax_usb_free_epid(epid);
-- return -ENXIO;
-- }
--
-- urb->status = -EINPROGRESS;
--
-- dbg_intr("Add intr urb 0x%lx, to list, epid %d", (unsigned long)urb, epid);
--
-- urb_list_add(urb, epid);
-- etrax_usb_add_to_intr_sb_list(urb, epid);
--
-- return 0;
--
-- DBFEXIT;
--}
--
--static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid)
--{
--
-- volatile USB_EP_Desc_t *tmp_ep;
-- volatile USB_EP_Desc_t *first_ep;
--
-- char maxlen;
-- int interval;
-- int i;
--
-- etrax_urb_priv_t *urb_priv;
--
-- DBFENTER;
--
-- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-- interval = urb->interval;
--
-- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG);
-- assert(urb_priv != NULL);
-- urb->hcpriv = urb_priv;
--
-- first_ep = &TxIntrEPList[0];
--
-- /* Round of the interval to 2^n, it is obvious that this code favours
-- smaller numbers, but that is actually a good thing */
-- /* FIXME: The "rounding error" for larger intervals will be quite
-- large. For in traffic this shouldn't be a problem since it will only
-- mean that we "poll" more often. */
-- for (i = 0; interval; i++) {
-- interval = interval >> 1;
-- }
-- interval = 1 << (i - 1);
--
-- dbg_intr("Interval rounded to %d", interval);
--
-- tmp_ep = first_ep;
-- i = 0;
-- do {
-- if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) {
-- if ((i % interval) == 0) {
-- /* Insert the traffic ep after tmp_ep */
-- USB_EP_Desc_t *ep_desc;
-- USB_SB_Desc_t *sb_desc;
--
-- dbg_intr("Inserting EP for epid %d", epid);
--
-- ep_desc = (USB_EP_Desc_t *)
-- kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
-- sb_desc = (USB_SB_Desc_t *)
-- kmem_cache_alloc(usb_desc_cache, SLAB_FLAG);
-- assert(ep_desc != NULL);
-- CHECK_ALIGN(ep_desc);
-- assert(sb_desc != NULL);
--
-- ep_desc->sub = virt_to_phys(sb_desc);
-- ep_desc->hw_len = 0;
-- ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) |
-- IO_STATE(USB_EP_command, enable, yes));
--
--
-- /* Round upwards the number of packets of size maxlen
-- that this SB descriptor should receive. */
-- sb_desc->sw_len = urb->transfer_buffer_length ?
-- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0;
-- sb_desc->next = 0;
-- sb_desc->buf = 0;
-- sb_desc->command =
-- (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) |
-- IO_STATE(USB_SB_command, tt, in) |
-- IO_STATE(USB_SB_command, eot, yes) |
-- IO_STATE(USB_SB_command, eol, yes));
--
-- ep_desc->next = tmp_ep->next;
-- tmp_ep->next = virt_to_phys(ep_desc);
-- }
-- i++;
-- }
-- tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next);
-- } while (tmp_ep != first_ep);
--
--
-- /* Note that first_sb/last_sb doesn't apply to interrupt traffic. */
-- urb_priv->epid = epid;
--
-- /* We start the DMA sub channel without checking if it's running or not, because:
-- 1) If it's already running, issuing the start command is a nop.
-- 2) We avoid a test-and-set race condition. */
-- *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
--
-- DBFEXIT;
--}
--
--
--
--static void etrax_usb_complete_intr_urb(struct urb *urb, int status)
--{
-- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- int epid = urb_priv->epid;
--
-- DBFENTER;
--
-- if (status)
-- warn("Completing intr urb with status %d.", status);
--
-- dbg_intr("Completing intr epid %d, urb 0x%lx", epid, (unsigned long)urb);
--
-- urb->status = status;
-- urb->actual_length = urb_priv->rx_offset;
--
-- dbg_intr("interrupt urb->actual_length = %d", urb->actual_length);
--
-- /* We let any non-zero status from the layer above have precedence. */
-- if (status == 0) {
-- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length)
-- is to be treated as an error. */
-- if (urb->transfer_flags & URB_SHORT_NOT_OK) {
-- if (urb->actual_length !=
-- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
-- urb->status = -EREMOTEIO;
-- }
-- }
-- }
--
-- /* The driver will resubmit the URB so we need to remove it first */
-- etrax_usb_unlink_urb(urb, 0);
-- if (urb->complete) {
-- urb->complete(urb, NULL);
-- }
--
-- DBFEXIT;
--}
--
--
--static int etrax_usb_submit_isoc_urb(struct urb *urb)
--{
-- int epid;
-- unsigned long flags;
--
-- DBFENTER;
--
-- dbg_isoc("Submitting isoc urb = 0x%lx", (unsigned long)urb);
--
-- /* Epid allocation, empty check and list add must be protected.
-- Read about this in etrax_usb_submit_ctrl_urb. */
--
-- spin_lock_irqsave(&urb_list_lock, flags);
-- /* Is there an active epid for this urb ? */
-- epid = etrax_usb_setup_epid(urb);
-- if (epid == -1) {
-- DBFEXIT;
-- spin_unlock_irqrestore(&urb_list_lock, flags);
-- return -ENOMEM;
-- }
--
-- /* Ok, now we got valid endpoint, lets insert some traffic */
--
-- urb->status = -EINPROGRESS;
--
-- /* Find the last urb in the URB_List and add this urb after that one.
-- Also add the traffic, that is do an etrax_usb_add_to_isoc_sb_list. This
-- is important to make this in "real time" since isochronous traffic is
-- time sensitive. */
--
-- dbg_isoc("Adding isoc urb to (possibly empty) list");
-- urb_list_add(urb, epid);
-- etrax_usb_add_to_isoc_sb_list(urb, epid);
-- spin_unlock_irqrestore(&urb_list_lock, flags);
--
-- DBFEXIT;
--
-- return 0;
--}
--
--static void etrax_usb_check_error_isoc_ep(const int epid)
--{
-- unsigned long int flags;
-- int error_code;
-- __u32 r_usb_ept_data;
--
-- /* We can't read R_USB_EPID_ATTN here since it would clear the iso_eof,
-- bulk_eot and epid_attn interrupts. So we just check the status of
-- the epid without testing if for it in R_USB_EPID_ATTN. */
--
--
-- save_flags(flags);
-- cli();
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-- nop();
-- /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO
-- registers, they are located at the same address and are of the same size.
-- In other words, this read should be ok for isoc also. */
-- r_usb_ept_data = *R_USB_EPT_DATA;
-- restore_flags(flags);
--
-- error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data);
--
-- if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) {
-- warn("Hold was set for epid %d.", epid);
-- return;
-- }
--
-- if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, no_error)) {
--
-- /* This indicates that the SB list of the ept was completed before
-- new data was appended to it. This is not an error, but indicates
-- large system or USB load and could possibly cause trouble for
-- very timing sensitive USB device drivers so we log it.
-- */
-- info("Isoc. epid %d disabled with no error", epid);
-- return;
--
-- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, stall)) {
-- /* Not really a protocol error, just says that the endpoint gave
-- a stall response. Note that error_code cannot be stall for isoc. */
-- panic("Isoc traffic cannot stall");
--
-- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, bus_error)) {
-- /* Two devices responded to a transaction request. Must be resolved
-- by software. FIXME: Reset ports? */
-- panic("Bus error for epid %d."
-- " Two devices responded to transaction request",
-- epid);
--
-- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) {
-- /* DMA overrun or underrun. */
-- warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
--
-- /* It seems that error_code = buffer_error in
-- R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
-- are the same error. */
-- }
--}
--
--
--static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid)
--{
--
-- int i = 0;
--
-- etrax_urb_priv_t *urb_priv;
-- USB_SB_Desc_t *prev_sb_desc, *next_sb_desc, *temp_sb_desc;
--
-- DBFENTER;
--
-- prev_sb_desc = next_sb_desc = temp_sb_desc = NULL;
--
-- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC);
-- assert(urb_priv != NULL);
--
-- urb->hcpriv = urb_priv;
-- urb_priv->epid = epid;
--
-- if (usb_pipeout(urb->pipe)) {
--
-- if (urb->number_of_packets == 0) panic("etrax_usb_add_to_isoc_sb_list 0 packets\n");
--
-- dbg_isoc("Transfer for epid %d is OUT", epid);
-- dbg_isoc("%d packets in URB", urb->number_of_packets);
--
-- /* Create one SB descriptor for each packet and link them together. */
-- for (i = 0; i < urb->number_of_packets; i++) {
-- if (!urb->iso_frame_desc[i].length)
-- continue;
--
-- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC);
-- assert(next_sb_desc != NULL);
--
-- if (urb->iso_frame_desc[i].length > 0) {
--
-- next_sb_desc->command = (IO_STATE(USB_SB_command, tt, out) |
-- IO_STATE(USB_SB_command, eot, yes));
--
-- next_sb_desc->sw_len = urb->iso_frame_desc[i].length;
-- next_sb_desc->buf = virt_to_phys((char*)urb->transfer_buffer + urb->iso_frame_desc[i].offset);
--
-- /* Check if full length transfer. */
-- if (urb->iso_frame_desc[i].length ==
-- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
-- next_sb_desc->command |= IO_STATE(USB_SB_command, full, yes);
-- }
-- } else {
-- dbg_isoc("zero len packet");
-- next_sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) |
-- IO_STATE(USB_SB_command, tt, zout) |
-- IO_STATE(USB_SB_command, eot, yes) |
-- IO_STATE(USB_SB_command, full, yes));
--
-- next_sb_desc->sw_len = 1;
-- next_sb_desc->buf = virt_to_phys(&zout_buffer[0]);
-- }
--
-- /* First SB descriptor that belongs to this urb */
-- if (i == 0)
-- urb_priv->first_sb = next_sb_desc;
-- else
-- prev_sb_desc->next = virt_to_phys(next_sb_desc);
--
-- prev_sb_desc = next_sb_desc;
-- }
--
-- next_sb_desc->command |= (IO_STATE(USB_SB_command, intr, yes) |
-- IO_STATE(USB_SB_command, eol, yes));
-- next_sb_desc->next = 0;
-- urb_priv->last_sb = next_sb_desc;
--
-- } else if (usb_pipein(urb->pipe)) {
--
-- dbg_isoc("Transfer for epid %d is IN", epid);
-- dbg_isoc("transfer_buffer_length = %d", urb->transfer_buffer_length);
-- dbg_isoc("rem is calculated to %d", urb->iso_frame_desc[urb->number_of_packets - 1].length);
--
-- /* Note that in descriptors for periodic traffic are not consumed. This means that
-- the USB controller never propagates in the SB list. In other words, if there already
-- is an SB descriptor in the list for this EP we don't have to do anything. */
-- if (TxIsocEPList[epid].sub == 0) {
-- dbg_isoc("Isoc traffic not already running, allocating SB");
--
-- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC);
-- assert(next_sb_desc != NULL);
--
-- next_sb_desc->command = (IO_STATE(USB_SB_command, tt, in) |
-- IO_STATE(USB_SB_command, eot, yes) |
-- IO_STATE(USB_SB_command, eol, yes));
--
-- next_sb_desc->next = 0;
-- next_sb_desc->sw_len = 1; /* Actual number of packets is not relevant
-- for periodic in traffic as long as it is more
-- than zero. Set to 1 always. */
-- next_sb_desc->buf = 0;
--
-- /* The rem field is don't care for isoc traffic, so we don't set it. */
--
-- /* Only one SB descriptor that belongs to this urb. */
-- urb_priv->first_sb = next_sb_desc;
-- urb_priv->last_sb = next_sb_desc;
--
-- } else {
--
-- dbg_isoc("Isoc traffic already running, just setting first/last_sb");
--
-- /* Each EP for isoc in will have only one SB descriptor, setup when submitting the
-- already active urb. Note that even though we may have several first_sb/last_sb
-- pointing at the same SB descriptor, they are freed only once (when the list has
-- become empty). */
-- urb_priv->first_sb = phys_to_virt(TxIsocEPList[epid].sub);
-- urb_priv->last_sb = phys_to_virt(TxIsocEPList[epid].sub);
-- return;
-- }
--
-- }
--
-- /* Find the spot to insert this urb and add it. */
-- if (TxIsocEPList[epid].sub == 0) {
-- /* First SB descriptor inserted in this list (in or out). */
-- dbg_isoc("Inserting SB desc first in list");
-- TxIsocEPList[epid].hw_len = 0;
-- TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
--
-- } else {
-- /* Isochronous traffic is already running, insert new traffic last (only out). */
-- dbg_isoc("Inserting SB desc last in list");
-- temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
-- while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) !=
-- IO_STATE(USB_SB_command, eol, yes)) {
-- assert(temp_sb_desc->next);
-- temp_sb_desc = phys_to_virt(temp_sb_desc->next);
-- }
-- dbg_isoc("Appending list on desc 0x%p", temp_sb_desc);
--
-- /* Next pointer must be set before eol is removed. */
-- temp_sb_desc->next = virt_to_phys(urb_priv->first_sb);
-- /* Clear the previous end of list flag since there is a new in the
-- added SB descriptor list. */
-- temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol);
--
-- if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
-- /* 8.8.5 in Designer's Reference says we should check for and correct
-- any errors in the EP here. That should not be necessary if epid_attn
-- is handled correctly, so we assume all is ok. */
-- dbg_isoc("EP disabled");
-- etrax_usb_check_error_isoc_ep(epid);
--
-- /* The SB list was exhausted. */
-- if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) {
-- /* The new sublist did not get processed before the EP was
-- disabled. Setup the EP again. */
-- dbg_isoc("Set EP sub to new list");
-- TxIsocEPList[epid].hw_len = 0;
-- TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-- }
-- }
-- }
--
-- if (urb->transfer_flags & URB_ISO_ASAP) {
-- /* The isoc transfer should be started as soon as possible. The start_frame
-- field is a return value if URB_ISO_ASAP was set. Comparing R_USB_FM_NUMBER
-- with a USB Chief trace shows that the first isoc IN token is sent 2 frames
-- later. I'm not sure how this affects usage of the start_frame field by the
-- device driver, or how it affects things when USB_ISO_ASAP is not set, so
-- therefore there's no compensation for the 2 frame "lag" here. */
-- urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
-- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-- urb_priv->urb_state = STARTED;
-- dbg_isoc("URB_ISO_ASAP set, urb->start_frame set to %d", urb->start_frame);
-- } else {
-- /* Not started yet. */
-- urb_priv->urb_state = NOT_STARTED;
-- dbg_isoc("urb_priv->urb_state set to NOT_STARTED");
-- }
--
-- /* We start the DMA sub channel without checking if it's running or not, because:
-- 1) If it's already running, issuing the start command is a nop.
-- 2) We avoid a test-and-set race condition. */
-- *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
--
-- DBFEXIT;
--}
--
--static void etrax_usb_complete_isoc_urb(struct urb *urb, int status)
--{
-- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- int epid = urb_priv->epid;
-- int auto_resubmit = 0;
--
-- DBFENTER;
-- dbg_isoc("complete urb 0x%p, status %d", urb, status);
--
-- if (status)
-- warn("Completing isoc urb with status %d.", status);
--
-- if (usb_pipein(urb->pipe)) {
-- int i;
--
-- /* Make that all isoc packets have status and length set before
-- completing the urb. */
-- for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++) {
-- urb->iso_frame_desc[i].actual_length = 0;
-- urb->iso_frame_desc[i].status = -EPROTO;
-- }
--
-- urb_list_del(urb, epid);
--
-- if (!list_empty(&urb_list[epid])) {
-- ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED;
-- } else {
-- unsigned long int flags;
-- if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-- /* The EP was enabled, disable it and wait. */
-- TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
--
-- /* Ah, the luxury of busy-wait. */
-- while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid]));
-- }
--
-- etrax_remove_from_sb_list(urb);
-- TxIsocEPList[epid].sub = 0;
-- TxIsocEPList[epid].hw_len = 0;
--
-- save_flags(flags);
-- cli();
-- etrax_usb_free_epid(epid);
-- restore_flags(flags);
-- }
--
-- urb->hcpriv = 0;
-- kfree(urb_priv);
--
-- /* Release allocated bandwidth. */
-- usb_release_bandwidth(urb->dev, urb, 0);
-- } else if (usb_pipeout(urb->pipe)) {
-- int freed_descr;
--
-- dbg_isoc("Isoc out urb complete 0x%p", urb);
--
-- /* Update the urb list. */
-- urb_list_del(urb, epid);
--
-- freed_descr = etrax_remove_from_sb_list(urb);
-- dbg_isoc("freed %d descriptors of %d packets", freed_descr, urb->number_of_packets);
-- assert(freed_descr == urb->number_of_packets);
-- urb->hcpriv = 0;
-- kfree(urb_priv);
--
-- /* Release allocated bandwidth. */
-- usb_release_bandwidth(urb->dev, urb, 0);
-- }
--
-- urb->status = status;
-- if (urb->complete) {
-- urb->complete(urb, NULL);
-- }
--
-- if (auto_resubmit) {
-- /* Check that urb was not unlinked by the complete callback. */
-- if (__urb_list_entry(urb, epid)) {
-- /* Move this one down the list. */
-- urb_list_move_last(urb, epid);
--
-- /* Mark the now first urb as started (may already be). */
-- ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED;
--
-- /* Must set this to 0 since this urb is still active after
-- completion. */
-- urb_priv->isoc_packet_counter = 0;
-- } else {
-- warn("(ISOC) automatic resubmit urb 0x%p removed by complete.", urb);
-- }
-- }
--
-- DBFEXIT;
--}
--
--static void etrax_usb_complete_urb(struct urb *urb, int status)
--{
-- switch (usb_pipetype(urb->pipe)) {
-- case PIPE_BULK:
-- etrax_usb_complete_bulk_urb(urb, status);
-- break;
-- case PIPE_CONTROL:
-- etrax_usb_complete_ctrl_urb(urb, status);
-- break;
-- case PIPE_INTERRUPT:
-- etrax_usb_complete_intr_urb(urb, status);
-- break;
-- case PIPE_ISOCHRONOUS:
-- etrax_usb_complete_isoc_urb(urb, status);
-- break;
-- default:
-- err("Unknown pipetype");
-- }
--}
--
--
--
--static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc)
--{
-- usb_interrupt_registers_t *reg;
-- unsigned long flags;
-- __u32 irq_mask;
-- __u8 status;
-- __u32 epid_attn;
-- __u16 port_status_1;
-- __u16 port_status_2;
-- __u32 fm_number;
--
-- DBFENTER;
--
-- /* Read critical registers into local variables, do kmalloc afterwards. */
-- save_flags(flags);
-- cli();
--
-- irq_mask = *R_USB_IRQ_MASK_READ;
-- /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that R_USB_STATUS
-- must be read before R_USB_EPID_ATTN since reading the latter clears the
-- ourun and perror fields of R_USB_STATUS. */
-- status = *R_USB_STATUS;
--
-- /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn interrupts. */
-- epid_attn = *R_USB_EPID_ATTN;
--
-- /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the
-- port_status interrupt. */
-- port_status_1 = *R_USB_RH_PORT_STATUS_1;
-- port_status_2 = *R_USB_RH_PORT_STATUS_2;
--
-- /* Reading R_USB_FM_NUMBER clears the sof interrupt. */
-- /* Note: the lower 11 bits contain the actual frame number, sent with each sof. */
-- fm_number = *R_USB_FM_NUMBER;
--
-- restore_flags(flags);
--
-- reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, SLAB_ATOMIC);
--
-- assert(reg != NULL);
--
-- reg->hc = (etrax_hc_t *)vhc;
--
-- /* Now put register values into kmalloc'd area. */
-- reg->r_usb_irq_mask_read = irq_mask;
-- reg->r_usb_status = status;
-- reg->r_usb_epid_attn = epid_attn;
-- reg->r_usb_rh_port_status_1 = port_status_1;
-- reg->r_usb_rh_port_status_2 = port_status_2;
-- reg->r_usb_fm_number = fm_number;
--
-- INIT_WORK(&reg->usb_bh, etrax_usb_hc_interrupt_bottom_half, reg);
-- schedule_work(&reg->usb_bh);
--
-- DBFEXIT;
--
-- return IRQ_HANDLED;
--}
--
--static void etrax_usb_hc_interrupt_bottom_half(void *data)
--{
-- usb_interrupt_registers_t *reg = (usb_interrupt_registers_t *)data;
-- __u32 irq_mask = reg->r_usb_irq_mask_read;
--
-- DBFENTER;
--
-- /* Interrupts are handled in order of priority. */
-- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) {
-- etrax_usb_hc_epid_attn_interrupt(reg);
-- }
-- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) {
-- etrax_usb_hc_port_status_interrupt(reg);
-- }
-- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) {
-- etrax_usb_hc_ctl_status_interrupt(reg);
-- }
-- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) {
-- etrax_usb_hc_isoc_eof_interrupt();
-- }
-- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) {
-- /* Update/restart the bulk start timer since obviously the channel is running. */
-- mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
-- /* Update/restart the bulk eot timer since we just received an bulk eot interrupt. */
-- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
--
-- etrax_usb_hc_bulk_eot_interrupt(0);
-- }
--
-- kmem_cache_free(top_half_reg_cache, reg);
--
-- DBFEXIT;
--}
--
--
--void etrax_usb_hc_isoc_eof_interrupt(void)
--{
-- struct urb *urb;
-- etrax_urb_priv_t *urb_priv;
-- int epid;
-- unsigned long flags;
--
-- DBFENTER;
--
-- /* Do not check the invalid epid (it has a valid sub pointer). */
-- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
--
-- /* Do not check the invalid epid (it has a valid sub pointer). */
-- if ((epid == DUMMY_EPID) || (epid == INVALID_EPID))
-- continue;
--
-- /* Disable interrupts to block the isoc out descriptor interrupt handler
-- from being called while the isoc EPID list is being checked.
-- */
-- save_flags(flags);
-- cli();
--
-- if (TxIsocEPList[epid].sub == 0) {
-- /* Nothing here to see. */
-- restore_flags(flags);
-- continue;
-- }
--
-- /* Get the first urb (if any). */
-- urb = urb_list_first(epid);
-- if (urb == 0) {
-- warn("Ignoring NULL urb");
-- restore_flags(flags);
-- continue;
-- }
-- if (usb_pipein(urb->pipe)) {
--
-- /* Sanity check. */
-- assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
--
-- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- assert(urb_priv);
--
-- if (urb_priv->urb_state == NOT_STARTED) {
--
-- /* If ASAP is not set and urb->start_frame is the current frame,
-- start the transfer. */
-- if (!(urb->transfer_flags & URB_ISO_ASAP) &&
-- (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) {
--
-- dbg_isoc("Enabling isoc IN EP descr for epid %d", epid);
-- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
--
-- /* This urb is now active. */
-- urb_priv->urb_state = STARTED;
-- continue;
-- }
-- }
-- }
-- restore_flags(flags);
-- }
--
-- DBFEXIT;
--
--}
--
--void etrax_usb_hc_bulk_eot_interrupt(int timer_induced)
--{
-- int epid;
--
-- /* The technique is to run one urb at a time, wait for the eot interrupt at which
-- point the EP descriptor has been disabled. */
--
-- DBFENTER;
-- dbg_bulk("bulk eot%s", timer_induced ? ", called by timer" : "");
--
-- for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
--
-- if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
-- (TxBulkEPList[epid].sub != 0)) {
--
-- struct urb *urb;
-- etrax_urb_priv_t *urb_priv;
-- unsigned long flags;
-- __u32 r_usb_ept_data;
--
-- /* Found a disabled EP descriptor which has a non-null sub pointer.
-- Verify that this ctrl EP descriptor got disabled no errors.
-- FIXME: Necessary to check error_code? */
-- dbg_bulk("for epid %d?", epid);
--
-- /* Get the first urb. */
-- urb = urb_list_first(epid);
--
-- /* FIXME: Could this happen for valid reasons? Why did it disappear? Because of
-- wrong unlinking? */
-- if (!urb) {
-- warn("NULL urb for epid %d", epid);
-- continue;
-- }
--
-- assert(urb);
-- urb_priv = (etrax_urb_priv_t *)urb->hcpriv;
-- assert(urb_priv);
--
-- /* Sanity checks. */
-- assert(usb_pipetype(urb->pipe) == PIPE_BULK);
-- if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) {
-- err("bulk endpoint got disabled before reaching last sb");
-- }
--
-- /* For bulk IN traffic, there seems to be a race condition between
-- between the bulk eot and eop interrupts, or rather an uncertainty regarding
-- the order in which they happen. Normally we expect the eop interrupt from
-- DMA channel 9 to happen before the eot interrupt.
--
-- Therefore, we complete the bulk IN urb in the rx interrupt handler instead. */
--
-- if (usb_pipein(urb->pipe)) {
-- dbg_bulk("in urb, continuing");
-- continue;
-- }
--
-- save_flags(flags);
-- cli();
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-- nop();
-- r_usb_ept_data = *R_USB_EPT_DATA;
-- restore_flags(flags);
--
-- if (IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data) ==
-- IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-- /* This means that the endpoint has no error, is disabled
-- and had inserted traffic, i.e. transfer successfully completed. */
-- etrax_usb_complete_bulk_urb(urb, 0);
-- } else {
-- /* Shouldn't happen. We expect errors to be caught by epid attention. */
-- err("Found disabled bulk EP desc, error_code != no_error");
-- }
-- }
-- }
--
-- /* Normally, we should find (at least) one disabled EP descriptor with a valid sub pointer.
-- However, because of the uncertainty in the deliverance of the eop/eot interrupts, we may
-- not. Also, we might find two disabled EPs when handling an eot interrupt, and then find
-- none the next time. */
--
-- DBFEXIT;
--
--}
--
--void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg)
--{
-- /* This function handles the epid attention interrupt. There are a variety of reasons
-- for this interrupt to happen (Designer's Reference, p. 8 - 22 for the details):
--
-- invalid ep_id - Invalid epid in an EP (EP disabled).
-- stall - Not strictly an error condition (EP disabled).
-- 3rd error - Three successive transaction errors (EP disabled).
-- buffer ourun - Buffer overrun or underrun (EP disabled).
-- past eof1 - Intr or isoc transaction proceeds past EOF1.
-- near eof - Intr or isoc transaction would not fit inside the frame.
-- zout transfer - If zout transfer for a bulk endpoint (EP disabled).
-- setup transfer - If setup transfer for a non-ctrl endpoint (EP disabled). */
--
-- int epid;
--
--
-- DBFENTER;
--
-- assert(reg != NULL);
--
-- /* Note that we loop through all epids. We still want to catch errors for
-- the invalid one, even though we might handle them differently. */
-- for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
--
-- if (test_bit(epid, (void *)&reg->r_usb_epid_attn)) {
--
-- struct urb *urb;
-- __u32 r_usb_ept_data;
-- unsigned long flags;
-- int error_code;
--
-- save_flags(flags);
-- cli();
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-- nop();
-- /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO
-- registers, they are located at the same address and are of the same size.
-- In other words, this read should be ok for isoc also. */
-- r_usb_ept_data = *R_USB_EPT_DATA;
-- restore_flags(flags);
--
-- /* First some sanity checks. */
-- if (epid == INVALID_EPID) {
-- /* FIXME: What if it became disabled? Could seriously hurt interrupt
-- traffic. (Use do_intr_recover.) */
-- warn("Got epid_attn for INVALID_EPID (%d).", epid);
-- err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data);
-- err("R_USB_STATUS = 0x%x", reg->r_usb_status);
-- continue;
-- } else if (epid == DUMMY_EPID) {
-- /* We definitely don't care about these ones. Besides, they are
-- always disabled, so any possible disabling caused by the
-- epid attention interrupt is irrelevant. */
-- warn("Got epid_attn for DUMMY_EPID (%d).", epid);
-- continue;
-- }
--
-- /* Get the first urb in the urb list for this epid. We blatantly assume
-- that only the first urb could have caused the epid attention.
-- (For bulk and ctrl, only one urb is active at any one time. For intr
-- and isoc we remove them once they are completed.) */
-- urb = urb_list_first(epid);
--
-- if (urb == NULL) {
-- err("Got epid_attn for epid %i with no urb.", epid);
-- err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data);
-- err("R_USB_STATUS = 0x%x", reg->r_usb_status);
-- continue;
-- }
--
-- switch (usb_pipetype(urb->pipe)) {
-- case PIPE_BULK:
-- warn("Got epid attn for bulk endpoint, epid %d", epid);
-- break;
-- case PIPE_CONTROL:
-- warn("Got epid attn for control endpoint, epid %d", epid);
-- break;
-- case PIPE_INTERRUPT:
-- warn("Got epid attn for interrupt endpoint, epid %d", epid);
-- break;
-- case PIPE_ISOCHRONOUS:
-- warn("Got epid attn for isochronous endpoint, epid %d", epid);
-- break;
-- }
--
-- if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) {
-- if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) {
-- warn("Hold was set for epid %d.", epid);
-- continue;
-- }
-- }
--
-- /* Even though error_code occupies bits 22 - 23 in both R_USB_EPT_DATA and
-- R_USB_EPT_DATA_ISOC, we separate them here so we don't forget in other places. */
-- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-- error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data);
-- } else {
-- error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data);
-- }
--
-- /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */
-- if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
--
-- /* Isoc traffic doesn't have error_count_in/error_count_out. */
-- if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) &&
-- (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, r_usb_ept_data) == 3 ||
-- IO_EXTRACT(R_USB_EPT_DATA, error_count_out, r_usb_ept_data) == 3)) {
-- /* 3rd error. */
-- warn("3rd error for epid %i", epid);
-- etrax_usb_complete_urb(urb, -EPROTO);
--
-- } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
--
-- warn("Perror for epid %d", epid);
--
-- if (!(r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, valid))) {
-- /* invalid ep_id */
-- panic("Perror because of invalid epid."
-- " Deconfigured too early?");
-- } else {
-- /* past eof1, near eof, zout transfer, setup transfer */
--
-- /* Dump the urb and the relevant EP descriptor list. */
--
-- __dump_urb(urb);
-- __dump_ept_data(epid);
-- __dump_ep_list(usb_pipetype(urb->pipe));
--
-- panic("Something wrong with DMA descriptor contents."
-- " Too much traffic inserted?");
-- }
-- } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
-- /* buffer ourun */
-- panic("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
-- }
--
-- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, stall)) {
-- /* Not really a protocol error, just says that the endpoint gave
-- a stall response. Note that error_code cannot be stall for isoc. */
-- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-- panic("Isoc traffic cannot stall");
-- }
--
-- warn("Stall for epid %d", epid);
-- etrax_usb_complete_urb(urb, -EPIPE);
--
-- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, bus_error)) {
-- /* Two devices responded to a transaction request. Must be resolved
-- by software. FIXME: Reset ports? */
-- panic("Bus error for epid %d."
-- " Two devices responded to transaction request",
-- epid);
--
-- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) {
-- /* DMA overrun or underrun. */
-- warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid);
--
-- /* It seems that error_code = buffer_error in
-- R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
-- are the same error. */
-- etrax_usb_complete_urb(urb, -EPROTO);
-- }
-- }
-- }
--
-- DBFEXIT;
--
--}
--
--void etrax_usb_bulk_start_timer_func(unsigned long dummy)
--{
--
-- /* We might enable an EP descriptor behind the current DMA position when it's about
-- to decide that there are no more bulk traffic and it should stop the bulk channel.
-- Therefore we periodically check if the bulk channel is stopped and there is an
-- enabled bulk EP descriptor, in which case we start the bulk channel. */
-- dbg_bulk("bulk_start_timer timed out.");
--
-- if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
-- int epid;
--
-- dbg_bulk("Bulk DMA channel not running.");
--
-- for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-- if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-- dbg_bulk("Found enabled EP for epid %d, starting bulk channel.\n",
-- epid);
-- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
--
-- /* Restart the bulk eot timer since we just started the bulk channel. */
-- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
--
-- /* No need to search any further. */
-- break;
-- }
-- }
-- } else {
-- dbg_bulk("Bulk DMA channel running.");
-- }
--}
--
--void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg)
--{
-- etrax_hc_t *hc = reg->hc;
-- __u16 r_usb_rh_port_status_1 = reg->r_usb_rh_port_status_1;
-- __u16 r_usb_rh_port_status_2 = reg->r_usb_rh_port_status_2;
--
-- DBFENTER;
--
-- /* The Etrax RH does not include a wPortChange register, so this has to be handled in software
-- (by saving the old port status value for comparison when the port status interrupt happens).
-- See section 11.16.2.6.2 in the USB 1.1 spec for details. */
--
-- dbg_rh("hc->rh.prev_wPortStatus_1 = 0x%x", hc->rh.prev_wPortStatus_1);
-- dbg_rh("hc->rh.prev_wPortStatus_2 = 0x%x", hc->rh.prev_wPortStatus_2);
-- dbg_rh("r_usb_rh_port_status_1 = 0x%x", r_usb_rh_port_status_1);
-- dbg_rh("r_usb_rh_port_status_2 = 0x%x", r_usb_rh_port_status_2);
--
-- /* C_PORT_CONNECTION is set on any transition. */
-- hc->rh.wPortChange_1 |=
-- ((r_usb_rh_port_status_1 & (1 << RH_PORT_CONNECTION)) !=
-- (hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_CONNECTION))) ?
-- (1 << RH_PORT_CONNECTION) : 0;
--
-- hc->rh.wPortChange_2 |=
-- ((r_usb_rh_port_status_2 & (1 << RH_PORT_CONNECTION)) !=
-- (hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_CONNECTION))) ?
-- (1 << RH_PORT_CONNECTION) : 0;
--
-- /* C_PORT_ENABLE is _only_ set on a one to zero transition, i.e. when
-- the port is disabled, not when it's enabled. */
-- hc->rh.wPortChange_1 |=
-- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_ENABLE))
-- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_ENABLE))) ?
-- (1 << RH_PORT_ENABLE) : 0;
--
-- hc->rh.wPortChange_2 |=
-- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_ENABLE))
-- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_ENABLE))) ?
-- (1 << RH_PORT_ENABLE) : 0;
--
-- /* C_PORT_SUSPEND is set to one when the device has transitioned out
-- of the suspended state, i.e. when suspend goes from one to zero. */
-- hc->rh.wPortChange_1 |=
-- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_SUSPEND))
-- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_SUSPEND))) ?
-- (1 << RH_PORT_SUSPEND) : 0;
--
-- hc->rh.wPortChange_2 |=
-- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_SUSPEND))
-- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_SUSPEND))) ?
-- (1 << RH_PORT_SUSPEND) : 0;
--
--
-- /* C_PORT_RESET is set when reset processing on this port is complete. */
-- hc->rh.wPortChange_1 |=
-- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_RESET))
-- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_RESET))) ?
-- (1 << RH_PORT_RESET) : 0;
--
-- hc->rh.wPortChange_2 |=
-- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_RESET))
-- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_RESET))) ?
-- (1 << RH_PORT_RESET) : 0;
--
-- /* Save the new values for next port status change. */
-- hc->rh.prev_wPortStatus_1 = r_usb_rh_port_status_1;
-- hc->rh.prev_wPortStatus_2 = r_usb_rh_port_status_2;
--
-- dbg_rh("hc->rh.wPortChange_1 set to 0x%x", hc->rh.wPortChange_1);
-- dbg_rh("hc->rh.wPortChange_2 set to 0x%x", hc->rh.wPortChange_2);
--
-- DBFEXIT;
--
--}
--
--void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg)
--{
-- DBFENTER;
--
-- /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB
-- list for the corresponding epid? */
-- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
-- panic("USB controller got ourun.");
-- }
-- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
--
-- /* Before, etrax_usb_do_intr_recover was called on this epid if it was
-- an interrupt pipe. I don't see how re-enabling all EP descriptors
-- will help if there was a programming error. */
-- panic("USB controller got perror.");
-- }
--
-- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) {
-- /* We should never operate in device mode. */
-- panic("USB controller in device mode.");
-- }
--
-- /* These if-statements could probably be nested. */
-- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, host_mode)) {
-- info("USB controller in host mode.");
-- }
-- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, started)) {
-- info("USB controller started.");
-- }
-- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, running)) {
-- info("USB controller running.");
-- }
--
-- DBFEXIT;
--
--}
--
--
--static int etrax_rh_submit_urb(struct urb *urb)
--{
-- struct usb_device *usb_dev = urb->dev;
-- etrax_hc_t *hc = usb_dev->bus->hcpriv;
-- unsigned int pipe = urb->pipe;
-- struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet;
-- void *data = urb->transfer_buffer;
-- int leni = urb->transfer_buffer_length;
-- int len = 0;
-- int stat = 0;
--
-- __u16 bmRType_bReq;
-- __u16 wValue;
-- __u16 wIndex;
-- __u16 wLength;
--
-- DBFENTER;
--
-- /* FIXME: What is this interrupt urb that is sent to the root hub? */
-- if (usb_pipetype (pipe) == PIPE_INTERRUPT) {
-- dbg_rh("Root-Hub submit IRQ: every %d ms", urb->interval);
-- hc->rh.urb = urb;
-- hc->rh.send = 1;
-- /* FIXME: We could probably remove this line since it's done
-- in etrax_rh_init_int_timer. (Don't remove it from
-- etrax_rh_init_int_timer though.) */
-- hc->rh.interval = urb->interval;
-- etrax_rh_init_int_timer(urb);
-- DBFEXIT;
--
-- return 0;
-- }
--
-- bmRType_bReq = cmd->bRequestType | (cmd->bRequest << 8);
-- wValue = le16_to_cpu(cmd->wValue);
-- wIndex = le16_to_cpu(cmd->wIndex);
-- wLength = le16_to_cpu(cmd->wLength);
--
-- dbg_rh("bmRType_bReq : 0x%04x (%d)", bmRType_bReq, bmRType_bReq);
-- dbg_rh("wValue : 0x%04x (%d)", wValue, wValue);
-- dbg_rh("wIndex : 0x%04x (%d)", wIndex, wIndex);
-- dbg_rh("wLength : 0x%04x (%d)", wLength, wLength);
--
-- switch (bmRType_bReq) {
--
-- /* Request Destination:
-- without flags: Device,
-- RH_INTERFACE: interface,
-- RH_ENDPOINT: endpoint,
-- RH_CLASS means HUB here,
-- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
-- */
--
-- case RH_GET_STATUS:
-- *(__u16 *) data = cpu_to_le16 (1);
-- OK (2);
--
-- case RH_GET_STATUS | RH_INTERFACE:
-- *(__u16 *) data = cpu_to_le16 (0);
-- OK (2);
--
-- case RH_GET_STATUS | RH_ENDPOINT:
-- *(__u16 *) data = cpu_to_le16 (0);
-- OK (2);
--
-- case RH_GET_STATUS | RH_CLASS:
-- *(__u32 *) data = cpu_to_le32 (0);
-- OK (4); /* hub power ** */
--
-- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-- if (wIndex == 1) {
-- *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_1);
-- *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_1);
-- } else if (wIndex == 2) {
-- *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_2);
-- *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_2);
-- } else {
-- dbg_rh("RH_GET_STATUS whith invalid wIndex!");
-- OK(0);
-- }
--
-- OK(4);
--
-- case RH_CLEAR_FEATURE | RH_ENDPOINT:
-- switch (wValue) {
-- case (RH_ENDPOINT_STALL):
-- OK (0);
-- }
-- break;
--
-- case RH_CLEAR_FEATURE | RH_CLASS:
-- switch (wValue) {
-- case (RH_C_HUB_OVER_CURRENT):
-- OK (0); /* hub power over current ** */
-- }
-- break;
--
-- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
-- switch (wValue) {
-- case (RH_PORT_ENABLE):
-- if (wIndex == 1) {
--
-- dbg_rh("trying to do disable port 1");
--
-- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
--
-- while (hc->rh.prev_wPortStatus_1 &
-- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes));
-- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
-- dbg_rh("Port 1 is disabled");
--
-- } else if (wIndex == 2) {
--
-- dbg_rh("trying to do disable port 2");
--
-- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes);
--
-- while (hc->rh.prev_wPortStatus_2 &
-- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes));
-- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
-- dbg_rh("Port 2 is disabled");
--
-- } else {
-- dbg_rh("RH_CLEAR_FEATURE->RH_PORT_ENABLE "
-- "with invalid wIndex == %d!", wIndex);
-- }
--
-- OK (0);
-- case (RH_PORT_SUSPEND):
-- /* Opposite to suspend should be resume, so we'll do a resume. */
-- /* FIXME: USB 1.1, 11.16.2.2 says:
-- "Clearing the PORT_SUSPEND feature causes a host-initiated resume
-- on the specified port. If the port is not in the Suspended state,
-- the hub should treat this request as a functional no-operation."
-- Shouldn't we check if the port is in a suspended state before
-- resuming? */
--
-- /* Make sure the controller isn't busy. */
-- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
--
-- if (wIndex == 1) {
-- *R_USB_COMMAND =
-- IO_STATE(R_USB_COMMAND, port_sel, port1) |
-- IO_STATE(R_USB_COMMAND, port_cmd, resume) |
-- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
-- } else if (wIndex == 2) {
-- *R_USB_COMMAND =
-- IO_STATE(R_USB_COMMAND, port_sel, port2) |
-- IO_STATE(R_USB_COMMAND, port_cmd, resume) |
-- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
-- } else {
-- dbg_rh("RH_CLEAR_FEATURE->RH_PORT_SUSPEND "
-- "with invalid wIndex == %d!", wIndex);
-- }
--
-- OK (0);
-- case (RH_PORT_POWER):
-- OK (0); /* port power ** */
-- case (RH_C_PORT_CONNECTION):
-- if (wIndex == 1) {
-- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_CONNECTION);
-- } else if (wIndex == 2) {
-- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_CONNECTION);
-- } else {
-- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_CONNECTION "
-- "with invalid wIndex == %d!", wIndex);
-- }
--
-- OK (0);
-- case (RH_C_PORT_ENABLE):
-- if (wIndex == 1) {
-- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_ENABLE);
-- } else if (wIndex == 2) {
-- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_ENABLE);
-- } else {
-- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_ENABLE "
-- "with invalid wIndex == %d!", wIndex);
-- }
-- OK (0);
-- case (RH_C_PORT_SUSPEND):
--/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
-- OK (0);
-- case (RH_C_PORT_OVER_CURRENT):
-- OK (0); /* port power over current ** */
-- case (RH_C_PORT_RESET):
-- if (wIndex == 1) {
-- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_RESET);
-- } else if (wIndex == 2) {
-- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_RESET);
-- } else {
-- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_RESET "
-- "with invalid index == %d!", wIndex);
-- }
--
-- OK (0);
--
-- }
-- break;
--
-- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
-- switch (wValue) {
-- case (RH_PORT_SUSPEND):
--
-- /* Make sure the controller isn't busy. */
-- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
--
-- if (wIndex == 1) {
-- *R_USB_COMMAND =
-- IO_STATE(R_USB_COMMAND, port_sel, port1) |
-- IO_STATE(R_USB_COMMAND, port_cmd, suspend) |
-- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
-- } else if (wIndex == 2) {
-- *R_USB_COMMAND =
-- IO_STATE(R_USB_COMMAND, port_sel, port2) |
-- IO_STATE(R_USB_COMMAND, port_cmd, suspend) |
-- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
-- } else {
-- dbg_rh("RH_SET_FEATURE->RH_PORT_SUSPEND "
-- "with invalid wIndex == %d!", wIndex);
-- }
--
-- OK (0);
-- case (RH_PORT_RESET):
-- if (wIndex == 1) {
--
-- port_1_reset:
-- dbg_rh("Doing reset of port 1");
--
-- /* Make sure the controller isn't busy. */
-- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
--
-- *R_USB_COMMAND =
-- IO_STATE(R_USB_COMMAND, port_sel, port1) |
-- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
--
-- /* We must wait at least 10 ms for the device to recover.
-- 15 ms should be enough. */
-- udelay(15000);
--
-- /* Wait for reset bit to go low (should be done by now). */
-- while (hc->rh.prev_wPortStatus_1 &
-- IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes));
--
-- /* If the port status is
-- 1) connected and enabled then there is a device and everything is fine
-- 2) neither connected nor enabled then there is no device, also fine
-- 3) connected and not enabled then we try again
-- (Yes, there are other port status combinations besides these.) */
--
-- if ((hc->rh.prev_wPortStatus_1 &
-- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) &&
-- (hc->rh.prev_wPortStatus_1 &
-- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) {
-- dbg_rh("Connected device on port 1, but port not enabled?"
-- " Trying reset again.");
-- goto port_2_reset;
-- }
--
-- /* Diagnostic printouts. */
-- if ((hc->rh.prev_wPortStatus_1 &
-- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, no)) &&
-- (hc->rh.prev_wPortStatus_1 &
-- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) {
-- dbg_rh("No connected device on port 1");
-- } else if ((hc->rh.prev_wPortStatus_1 &
-- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) &&
-- (hc->rh.prev_wPortStatus_1 &
-- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes))) {
-- dbg_rh("Connected device on port 1, port 1 enabled");
-- }
--
-- } else if (wIndex == 2) {
--
-- port_2_reset:
-- dbg_rh("Doing reset of port 2");
--
-- /* Make sure the controller isn't busy. */
-- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
--
-- /* Issue the reset command. */
-- *R_USB_COMMAND =
-- IO_STATE(R_USB_COMMAND, port_sel, port2) |
-- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop);
--
-- /* We must wait at least 10 ms for the device to recover.
-- 15 ms should be enough. */
-- udelay(15000);
--
-- /* Wait for reset bit to go low (should be done by now). */
-- while (hc->rh.prev_wPortStatus_2 &
-- IO_STATE(R_USB_RH_PORT_STATUS_2, reset, yes));
--
-- /* If the port status is
-- 1) connected and enabled then there is a device and everything is fine
-- 2) neither connected nor enabled then there is no device, also fine
-- 3) connected and not enabled then we try again
-- (Yes, there are other port status combinations besides these.) */
--
-- if ((hc->rh.prev_wPortStatus_2 &
-- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) &&
-- (hc->rh.prev_wPortStatus_2 &
-- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) {
-- dbg_rh("Connected device on port 2, but port not enabled?"
-- " Trying reset again.");
-- goto port_2_reset;
-- }
--
-- /* Diagnostic printouts. */
-- if ((hc->rh.prev_wPortStatus_2 &
-- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, no)) &&
-- (hc->rh.prev_wPortStatus_2 &
-- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) {
-- dbg_rh("No connected device on port 2");
-- } else if ((hc->rh.prev_wPortStatus_2 &
-- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) &&
-- (hc->rh.prev_wPortStatus_2 &
-- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes))) {
-- dbg_rh("Connected device on port 2, port 2 enabled");
-- }
--
-- } else {
-- dbg_rh("RH_SET_FEATURE->RH_PORT_RESET with invalid wIndex = %d", wIndex);
-- }
--
-- /* Make sure the controller isn't busy. */
-- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
--
-- /* If all enabled ports were disabled the host controller goes down into
-- started mode, so we need to bring it back into the running state.
-- (This is safe even if it's already in the running state.) */
-- *R_USB_COMMAND =
-- IO_STATE(R_USB_COMMAND, port_sel, nop) |
-- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
--
-- dbg_rh("...Done");
-- OK(0);
--
-- case (RH_PORT_POWER):
-- OK (0); /* port power ** */
-- case (RH_PORT_ENABLE):
-- /* There is no port enable command in the host controller, so if the
-- port is already enabled, we do nothing. If not, we reset the port
-- (with an ugly goto). */
--
-- if (wIndex == 1) {
-- if (hc->rh.prev_wPortStatus_1 &
-- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no)) {
-- goto port_1_reset;
-- }
-- } else if (wIndex == 2) {
-- if (hc->rh.prev_wPortStatus_2 &
-- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no)) {
-- goto port_2_reset;
-- }
-- } else {
-- dbg_rh("RH_SET_FEATURE->RH_GET_STATUS with invalid wIndex = %d", wIndex);
-- }
-- OK (0);
-- }
-- break;
--
-- case RH_SET_ADDRESS:
-- hc->rh.devnum = wValue;
-- dbg_rh("RH address set to: %d", hc->rh.devnum);
-- OK (0);
--
-- case RH_GET_DESCRIPTOR:
-- switch ((wValue & 0xff00) >> 8) {
-- case (0x01): /* device descriptor */
-- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_dev_des), wLength));
-- memcpy (data, root_hub_dev_des, len);
-- OK (len);
-- case (0x02): /* configuration descriptor */
-- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_config_des), wLength));
-- memcpy (data, root_hub_config_des, len);
-- OK (len);
-- case (0x03): /* string descriptors */
-- len = usb_root_hub_string (wValue & 0xff,
-- 0xff, "ETRAX 100LX",
-- data, wLength);
-- if (len > 0) {
-- OK(min(leni, len));
-- } else {
-- stat = -EPIPE;
-- }
--
-- }
-- break;
--
-- case RH_GET_DESCRIPTOR | RH_CLASS:
-- root_hub_hub_des[2] = hc->rh.numports;
-- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_hub_des), wLength));
-- memcpy (data, root_hub_hub_des, len);
-- OK (len);
--
-- case RH_GET_CONFIGURATION:
-- *(__u8 *) data = 0x01;
-- OK (1);
--
-- case RH_SET_CONFIGURATION:
-- OK (0);
--
-- default:
-- stat = -EPIPE;
-- }
--
-- urb->actual_length = len;
-- urb->status = stat;
-- urb->dev = NULL;
-- if (urb->complete) {
-- urb->complete(urb, NULL);
-- }
-- DBFEXIT;
--
-- return 0;
--}
--
--static void
--etrax_usb_bulk_eot_timer_func(unsigned long dummy)
--{
-- /* Because of a race condition in the top half, we might miss a bulk eot.
-- This timer "simulates" a bulk eot if we don't get one for a while, hopefully
-- correcting the situation. */
-- dbg_bulk("bulk_eot_timer timed out.");
-- etrax_usb_hc_bulk_eot_interrupt(1);
--}
--
--static void*
--etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size,
-- unsigned mem_flags, dma_addr_t *dma)
--{
-- return kmalloc(size, mem_flags);
--}
--
--static void
--etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma)
--{
-- kfree(addr);
--}
--
--
--static struct device fake_device;
--
--static int __init etrax_usb_hc_init(void)
--{
-- static etrax_hc_t *hc;
-- struct usb_bus *bus;
-- struct usb_device *usb_rh;
-- int i;
--
-- DBFENTER;
--
-- info("ETRAX 100LX USB-HCD %s (c) 2001-2003 Axis Communications AB\n", usb_hcd_version);
--
-- hc = kmalloc(sizeof(etrax_hc_t), GFP_KERNEL);
-- assert(hc != NULL);
--
-- /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */
-- /* Note that we specify sizeof(USB_EP_Desc_t) as the size, but also allocate
-- SB descriptors from this cache. This is ok since sizeof(USB_EP_Desc_t) ==
-- sizeof(USB_SB_Desc_t). */
--
-- usb_desc_cache = kmem_cache_create("usb_desc_cache", sizeof(USB_EP_Desc_t), 0,
-- SLAB_HWCACHE_ALIGN, 0, 0);
-- assert(usb_desc_cache != NULL);
--
-- top_half_reg_cache = kmem_cache_create("top_half_reg_cache",
-- sizeof(usb_interrupt_registers_t),
-- 0, SLAB_HWCACHE_ALIGN, 0, 0);
-- assert(top_half_reg_cache != NULL);
--
-- isoc_compl_cache = kmem_cache_create("isoc_compl_cache",
-- sizeof(usb_isoc_complete_data_t),
-- 0, SLAB_HWCACHE_ALIGN, 0, 0);
-- assert(isoc_compl_cache != NULL);
--
-- etrax_usb_bus = bus = usb_alloc_bus(&etrax_usb_device_operations);
-- hc->bus = bus;
-- bus->bus_name="ETRAX 100LX";
-- bus->hcpriv = hc;
--
-- /* Initialize RH to the default address.
-- And make sure that we have no status change indication */
-- hc->rh.numports = 2; /* The RH has two ports */
-- hc->rh.devnum = 1;
-- hc->rh.wPortChange_1 = 0;
-- hc->rh.wPortChange_2 = 0;
--
-- /* Also initate the previous values to zero */
-- hc->rh.prev_wPortStatus_1 = 0;
-- hc->rh.prev_wPortStatus_2 = 0;
--
-- /* Initialize the intr-traffic flags */
-- /* FIXME: This isn't used. (Besides, the error field isn't initialized.) */
-- hc->intr.sleeping = 0;
-- hc->intr.wq = NULL;
--
-- epid_usage_bitmask = 0;
-- epid_out_traffic = 0;
--
-- /* Mark the invalid epid as being used. */
-- set_bit(INVALID_EPID, (void *)&epid_usage_bitmask);
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, INVALID_EPID);
-- nop();
-- /* The valid bit should still be set ('invalid' is in our world; not the hardware's). */
-- *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, yes) |
-- IO_FIELD(R_USB_EPT_DATA, max_len, 1));
--
-- /* Mark the dummy epid as being used. */
-- set_bit(DUMMY_EPID, (void *)&epid_usage_bitmask);
-- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, DUMMY_EPID);
-- nop();
-- *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, no) |
-- IO_FIELD(R_USB_EPT_DATA, max_len, 1));
--
-- /* Initialize the urb list by initiating a head for each list. */
-- for (i = 0; i < NBR_OF_EPIDS; i++) {
-- INIT_LIST_HEAD(&urb_list[i]);
-- }
-- spin_lock_init(&urb_list_lock);
--
-- INIT_LIST_HEAD(&urb_unlink_list);
--
--
-- /* Initiate the bulk start timer. */
-- init_timer(&bulk_start_timer);
-- bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL;
-- bulk_start_timer.function = etrax_usb_bulk_start_timer_func;
-- add_timer(&bulk_start_timer);
--
--
-- /* Initiate the bulk eot timer. */
-- init_timer(&bulk_eot_timer);
-- bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL;
-- bulk_eot_timer.function = etrax_usb_bulk_eot_timer_func;
-- add_timer(&bulk_eot_timer);
--
-- /* Set up the data structures for USB traffic. Note that this must be done before
-- any interrupt that relies on sane DMA list occurrs. */
-- init_rx_buffers();
-- init_tx_bulk_ep();
-- init_tx_ctrl_ep();
-- init_tx_intr_ep();
-- init_tx_isoc_ep();
--
-- device_initialize(&fake_device);
-- kobject_set_name(&fake_device.kobj, "etrax_usb");
-- kobject_add(&fake_device.kobj);
-- kobject_uevent(&fake_device.kobj, KOBJ_ADD);
-- hc->bus->controller = &fake_device;
-- usb_register_bus(hc->bus);
--
-- *R_IRQ_MASK2_SET =
-- /* Note that these interrupts are not used. */
-- IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) |
-- /* Sub channel 1 (ctrl) descr. interrupts are used. */
-- IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) |
-- IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) |
-- /* Sub channel 3 (isoc) descr. interrupts are used. */
-- IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set);
--
-- /* Note that the dma9_descr interrupt is not used. */
-- *R_IRQ_MASK2_SET =
-- IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) |
-- IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set);
--
-- /* FIXME: Enable iso_eof only when isoc traffic is running. */
-- *R_USB_IRQ_MASK_SET =
-- IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) |
-- IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) |
-- IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) |
-- IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) |
-- IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set);
--
--
-- if (request_irq(ETRAX_USB_HC_IRQ, etrax_usb_hc_interrupt_top_half, 0,
-- "ETRAX 100LX built-in USB (HC)", hc)) {
-- err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ);
-- etrax_usb_hc_cleanup();
-- DBFEXIT;
-- return -1;
-- }
--
-- if (request_irq(ETRAX_USB_RX_IRQ, etrax_usb_rx_interrupt, 0,
-- "ETRAX 100LX built-in USB (Rx)", hc)) {
-- err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ);
-- etrax_usb_hc_cleanup();
-- DBFEXIT;
-- return -1;
-- }
--
-- if (request_irq(ETRAX_USB_TX_IRQ, etrax_usb_tx_interrupt, 0,
-- "ETRAX 100LX built-in USB (Tx)", hc)) {
-- err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ);
-- etrax_usb_hc_cleanup();
-- DBFEXIT;
-- return -1;
-- }
--
-- /* R_USB_COMMAND:
-- USB commands in host mode. The fields in this register should all be
-- written to in one write. Do not read-modify-write one field at a time. A
-- write to this register will trigger events in the USB controller and an
-- incomplete command may lead to unpredictable results, and in worst case
-- even to a deadlock in the controller.
-- (Note however that the busy field is read-only, so no need to write to it.) */
--
-- /* Check the busy bit before writing to R_USB_COMMAND. */
--
-- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
--
-- /* Reset the USB interface. */
-- *R_USB_COMMAND =
-- IO_STATE(R_USB_COMMAND, port_sel, nop) |
-- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-- IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
--
-- /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to 0x2A30 (10800),
-- to guarantee that control traffic gets 10% of the bandwidth, and periodic transfer may
-- allocate the rest (90%). This doesn't work though. Read on for a lenghty explanation.
--
-- While there is a difference between rev. 2 and rev. 3 of the ETRAX 100LX regarding the NAK
-- behaviour, it doesn't solve this problem. What happens is that a control transfer will not
-- be interrupted in its data stage when PSTART happens (the point at which periodic traffic
-- is started). Thus, if PSTART is set to 10800 and its IN or OUT token is NAKed until just before
-- PSTART happens, it will continue the IN/OUT transfer as long as it's ACKed. After it's done,
-- there may be too little time left for an isochronous transfer, causing an epid attention
-- interrupt due to perror. The work-around for this is to let the control transfers run at the
-- end of the frame instead of at the beginning, and will be interrupted just fine if it doesn't
-- fit into the frame. However, since there will *always* be a control transfer at the beginning
-- of the frame, regardless of what we set PSTART to, that transfer might be a 64-byte transfer
-- which consumes up to 15% of the frame, leaving only 85% for periodic traffic. The solution to
-- this would be to 'dummy allocate' 5% of the frame with the usb_claim_bandwidth function to make
-- sure that the periodic transfers that are inserted will always fit in the frame.
--
-- The idea was suggested that a control transfer could be split up into several 8 byte transfers,
-- so that it would be interrupted by PSTART, but since this can't be done for an IN transfer this
-- hasn't been implemented.
--
-- The value 11960 is chosen to be just after the SOF token, with a couple of bit times extra
-- for possible bit stuffing. */
--
-- *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960);
--
--#ifdef CONFIG_ETRAX_USB_HOST_PORT1
-- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
--#endif
--
--#ifdef CONFIG_ETRAX_USB_HOST_PORT2
-- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
--#endif
--
-- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
--
-- /* Configure the USB interface as a host controller. */
-- *R_USB_COMMAND =
-- IO_STATE(R_USB_COMMAND, port_sel, nop) |
-- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config);
--
-- /* Note: Do not reset any ports here. Await the port status interrupts, to have a controlled
-- sequence of resetting the ports. If we reset both ports now, and there are devices
-- on both ports, we will get a bus error because both devices will answer the set address
-- request. */
--
-- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
--
-- /* Start processing of USB traffic. */
-- *R_USB_COMMAND =
-- IO_STATE(R_USB_COMMAND, port_sel, nop) |
-- IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
--
-- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy));
--
-- usb_rh = usb_alloc_dev(NULL, hc->bus, 0);
-- hc->bus->root_hub = usb_rh;
-- usb_rh->state = USB_STATE_ADDRESS;
-- usb_rh->speed = USB_SPEED_FULL;
-- usb_rh->devnum = 1;
-- hc->bus->devnum_next = 2;
-- usb_rh->ep0.desc.wMaxPacketSize = __const_cpu_to_le16(64);
-- usb_get_device_descriptor(usb_rh, USB_DT_DEVICE_SIZE);
-- usb_new_device(usb_rh);
--
-- DBFEXIT;
--
-- return 0;
--}
--
--static void etrax_usb_hc_cleanup(void)
--{
-- DBFENTER;
--
-- free_irq(ETRAX_USB_HC_IRQ, NULL);
-- free_irq(ETRAX_USB_RX_IRQ, NULL);
-- free_irq(ETRAX_USB_TX_IRQ, NULL);
--
-- usb_deregister_bus(etrax_usb_bus);
--
-- /* FIXME: call kmem_cache_destroy here? */
--
-- DBFEXIT;
--}
-
--module_init(etrax_usb_hc_init);
--module_exit(etrax_usb_hc_cleanup);
-+/* Module hooks */
-+module_init(module_hcd_init);
-+module_exit(module_hcd_exit);
---- linux-2.6.19.2.orig/drivers/usb/host/hc-crisv10.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.c 2007-02-26 20:58:29.000000000 +0100
-@@ -0,0 +1,4684 @@
-+/*
-+ *
-+ * ETRAX 100LX USB Host Controller Driver
-+ *
-+ * Copyright (C) 2005, 2006 Axis Communications AB
-+ *
-+ * Author: Konrad Eriksson <konrad.eriksson@axis.se>
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/moduleparam.h>
-+#include <linux/spinlock.h>
-+#include <linux/usb.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/arch/dma.h>
-+#include <asm/arch/io_interface_mux.h>
-+
-+#include "../core/hcd.h"
-+#include "../core/hub.h"
-+#include "hc-crisv10.h"
-+#include "hc-cris-dbg.h"
-+
-+
-+/***************************************************************************/
-+/***************************************************************************/
-+/* Host Controller settings */
-+/***************************************************************************/
-+/***************************************************************************/
-+
-+#define VERSION "1.00"
-+#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB"
-+#define DESCRIPTION "ETRAX 100LX USB Host Controller"
-+
-+#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR
-+#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR
-+#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR
-+
-+/* Number of physical ports in Etrax 100LX */
-+#define USB_ROOT_HUB_PORTS 2
-+
-+const char hc_name[] = "hc-crisv10";
-+const char product_desc[] = DESCRIPTION;
-+
-+/* The number of epids is, among other things, used for pre-allocating
-+ ctrl, bulk and isoc EP descriptors (one for each epid).
-+ Assumed to be > 1 when initiating the DMA lists. */
-+#define NBR_OF_EPIDS 32
-+
-+/* Support interrupt traffic intervals up to 128 ms. */
-+#define MAX_INTR_INTERVAL 128
-+
-+/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP
-+ table must be "invalid". By this we mean that we shouldn't care about epid
-+ attentions for this epid, or at least handle them differently from epid
-+ attentions for "valid" epids. This define determines which one to use
-+ (don't change it). */
-+#define INVALID_EPID 31
-+/* A special epid for the bulk dummys. */
-+#define DUMMY_EPID 30
-+
-+/* Module settings */
-+
-+MODULE_DESCRIPTION(DESCRIPTION);
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Konrad Eriksson <konrad.eriksson@axis.se>");
-+
-+
-+/* Module parameters */
-+
-+/* 0 = No ports enabled
-+ 1 = Only port 1 enabled (on board ethernet on devboard)
-+ 2 = Only port 2 enabled (external connector on devboard)
-+ 3 = Both ports enabled
-+*/
-+static unsigned int ports = 3;
-+module_param(ports, uint, S_IRUGO);
-+MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use");
-+
-+
-+/***************************************************************************/
-+/***************************************************************************/
-+/* Shared global variables for this module */
-+/***************************************************************************/
-+/***************************************************************************/
-+
-+/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */
-+static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-+
-+static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-+
-+/* EP descriptor lists for period transfers. Must be 32-bit aligned. */
-+static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4)));
-+static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4)));
-+
-+static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-+static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4)));
-+
-+static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4)));
-+
-+/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set,
-+ causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which
-+ gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the
-+ EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors
-+ in each frame. */
-+static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4)));
-+
-+/* List of URB pointers, where each points to the active URB for a epid.
-+ For Bulk, Ctrl and Intr this means which URB that currently is added to
-+ DMA lists (Isoc URBs are all directly added to DMA lists). As soon as
-+ URB has completed is the queue examined and the first URB in queue is
-+ removed and moved to the activeUrbList while its state change to STARTED and
-+ its transfer(s) gets added to DMA list (exception Isoc where URBs enter
-+ state STARTED directly and added transfers added to DMA lists). */
-+static struct urb *activeUrbList[NBR_OF_EPIDS];
-+
-+/* Additional software state info for each epid */
-+static struct etrax_epid epid_state[NBR_OF_EPIDS];
-+
-+/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops
-+ even if there is new data waiting to be processed */
-+static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0);
-+static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0);
-+
-+/* We want the start timer to expire before the eot timer, because the former
-+ might start traffic, thus making it unnecessary for the latter to time
-+ out. */
-+#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */
-+#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */
-+
-+/* Delay before a URB completion happen when it's scheduled to be delayed */
-+#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */
-+
-+/* Simplifying macros for checking software state info of a epid */
-+/* ----------------------------------------------------------------------- */
-+#define epid_inuse(epid) epid_state[epid].inuse
-+#define epid_out_traffic(epid) epid_state[epid].out_traffic
-+#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0)
-+#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0)
-+
-+
-+/***************************************************************************/
-+/***************************************************************************/
-+/* DEBUG FUNCTIONS */
-+/***************************************************************************/
-+/***************************************************************************/
-+/* Note that these functions are always available in their "__" variants,
-+ for use in error situations. The "__" missing variants are controlled by
-+ the USB_DEBUG_DESC/USB_DEBUG_URB macros. */
-+static void __dump_urb(struct urb* purb)
-+{
-+ struct crisv10_urb_priv *urb_priv = purb->hcpriv;
-+ int urb_num = -1;
-+ if(urb_priv) {
-+ urb_num = urb_priv->urb_num;
-+ }
-+ printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num);
-+ printk("dev :0x%08lx\n", (unsigned long)purb->dev);
-+ printk("pipe :0x%08x\n", purb->pipe);
-+ printk("status :%d\n", purb->status);
-+ printk("transfer_flags :0x%08x\n", purb->transfer_flags);
-+ printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer);
-+ printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length);
-+ printk("actual_length :%d\n", purb->actual_length);
-+ printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet);
-+ printk("start_frame :%d\n", purb->start_frame);
-+ printk("number_of_packets :%d\n", purb->number_of_packets);
-+ printk("interval :%d\n", purb->interval);
-+ printk("error_count :%d\n", purb->error_count);
-+ printk("context :0x%08lx\n", (unsigned long)purb->context);
-+ printk("complete :0x%08lx\n\n", (unsigned long)purb->complete);
-+}
-+
-+static void __dump_in_desc(volatile struct USB_IN_Desc *in)
-+{
-+ printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in);
-+ printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len);
-+ printk(" command : 0x%04x\n", in->command);
-+ printk(" next : 0x%08lx\n", in->next);
-+ printk(" buf : 0x%08lx\n", in->buf);
-+ printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len);
-+ printk(" status : 0x%04x\n\n", in->status);
-+}
-+
-+static void __dump_sb_desc(volatile struct USB_SB_Desc *sb)
-+{
-+ char tt = (sb->command & 0x30) >> 4;
-+ char *tt_string;
-+
-+ switch (tt) {
-+ case 0:
-+ tt_string = "zout";
-+ break;
-+ case 1:
-+ tt_string = "in";
-+ break;
-+ case 2:
-+ tt_string = "out";
-+ break;
-+ case 3:
-+ tt_string = "setup";
-+ break;
-+ default:
-+ tt_string = "unknown (weird)";
-+ }
-+
-+ printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb);
-+ printk(" command:0x%04x (", sb->command);
-+ printk("rem:%d ", (sb->command & 0x3f00) >> 8);
-+ printk("full:%d ", (sb->command & 0x40) >> 6);
-+ printk("tt:%d(%s) ", tt, tt_string);
-+ printk("intr:%d ", (sb->command & 0x8) >> 3);
-+ printk("eot:%d ", (sb->command & 0x2) >> 1);
-+ printk("eol:%d)", sb->command & 0x1);
-+ printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len);
-+ printk(" next:0x%08lx", sb->next);
-+ printk(" buf:0x%08lx\n", sb->buf);
-+}
-+
-+
-+static void __dump_ep_desc(volatile struct USB_EP_Desc *ep)
-+{
-+ printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep);
-+ printk(" command:0x%04x (", ep->command);
-+ printk("ep_id:%d ", (ep->command & 0x1f00) >> 8);
-+ printk("enable:%d ", (ep->command & 0x10) >> 4);
-+ printk("intr:%d ", (ep->command & 0x8) >> 3);
-+ printk("eof:%d ", (ep->command & 0x2) >> 1);
-+ printk("eol:%d)", ep->command & 0x1);
-+ printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len);
-+ printk(" next:0x%08lx", ep->next);
-+ printk(" sub:0x%08lx\n", ep->sub);
-+}
-+
-+static inline void __dump_ep_list(int pipe_type)
-+{
-+ volatile struct USB_EP_Desc *ep;
-+ volatile struct USB_EP_Desc *first_ep;
-+ volatile struct USB_SB_Desc *sb;
-+
-+ switch (pipe_type)
-+ {
-+ case PIPE_BULK:
-+ first_ep = &TxBulkEPList[0];
-+ break;
-+ case PIPE_CONTROL:
-+ first_ep = &TxCtrlEPList[0];
-+ break;
-+ case PIPE_INTERRUPT:
-+ first_ep = &TxIntrEPList[0];
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ first_ep = &TxIsocEPList[0];
-+ break;
-+ default:
-+ warn("Cannot dump unknown traffic type");
-+ return;
-+ }
-+ ep = first_ep;
-+
-+ printk("\n\nDumping EP list...\n\n");
-+
-+ do {
-+ __dump_ep_desc(ep);
-+ /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */
-+ sb = ep->sub ? phys_to_virt(ep->sub) : 0;
-+ while (sb) {
-+ __dump_sb_desc(sb);
-+ sb = sb->next ? phys_to_virt(sb->next) : 0;
-+ }
-+ ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next));
-+
-+ } while (ep != first_ep);
-+}
-+
-+static inline void __dump_ept_data(int epid)
-+{
-+ unsigned long flags;
-+ __u32 r_usb_ept_data;
-+
-+ if (epid < 0 || epid > 31) {
-+ printk("Cannot dump ept data for invalid epid %d\n", epid);
-+ return;
-+ }
-+
-+ local_irq_save(flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-+ nop();
-+ r_usb_ept_data = *R_USB_EPT_DATA;
-+ local_irq_restore(flags);
-+
-+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid);
-+ if (r_usb_ept_data == 0) {
-+ /* No need for more detailed printing. */
-+ return;
-+ }
-+ printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31);
-+ printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30);
-+ printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28);
-+ printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27);
-+ printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26);
-+ printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24);
-+ printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22);
-+ printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21);
-+ printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19);
-+ printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11);
-+ printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7);
-+ printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f));
-+}
-+
-+static inline void __dump_ept_data_iso(int epid)
-+{
-+ unsigned long flags;
-+ __u32 ept_data;
-+
-+ if (epid < 0 || epid > 31) {
-+ printk("Cannot dump ept data for invalid epid %d\n", epid);
-+ return;
-+ }
-+
-+ local_irq_save(flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-+ nop();
-+ ept_data = *R_USB_EPT_DATA_ISO;
-+ local_irq_restore(flags);
-+
-+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid);
-+ if (ept_data == 0) {
-+ /* No need for more detailed printing. */
-+ return;
-+ }
-+ printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid,
-+ ept_data));
-+ printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port,
-+ ept_data));
-+ printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code,
-+ ept_data));
-+ printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len,
-+ ept_data));
-+ printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep,
-+ ept_data));
-+ printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev,
-+ ept_data));
-+}
-+
-+static inline void __dump_ept_data_list(void)
-+{
-+ int i;
-+
-+ printk("Dumping the whole R_USB_EPT_DATA list\n");
-+
-+ for (i = 0; i < 32; i++) {
-+ __dump_ept_data(i);
-+ }
-+}
-+
-+static void debug_epid(int epid) {
-+ int i;
-+
-+ if(epid_isoc(epid)) {
-+ __dump_ept_data_iso(epid);
-+ } else {
-+ __dump_ept_data(epid);
-+ }
-+
-+ printk("Bulk:\n");
-+ for(i = 0; i < 32; i++) {
-+ if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) ==
-+ epid) {
-+ printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i]));
-+ }
-+ }
-+
-+ printk("Ctrl:\n");
-+ for(i = 0; i < 32; i++) {
-+ if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) ==
-+ epid) {
-+ printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i]));
-+ }
-+ }
-+
-+ printk("Intr:\n");
-+ for(i = 0; i < MAX_INTR_INTERVAL; i++) {
-+ if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) ==
-+ epid) {
-+ printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i]));
-+ }
-+ }
-+
-+ printk("Isoc:\n");
-+ for(i = 0; i < 32; i++) {
-+ if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) ==
-+ epid) {
-+ printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i]));
-+ }
-+ }
-+
-+ __dump_ept_data_list();
-+ __dump_ep_list(PIPE_INTERRUPT);
-+ printk("\n\n");
-+}
-+
-+
-+
-+char* hcd_status_to_str(__u8 bUsbStatus) {
-+ static char hcd_status_str[128];
-+ hcd_status_str[0] = '\0';
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) {
-+ strcat(hcd_status_str, "ourun ");
-+ }
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) {
-+ strcat(hcd_status_str, "perror ");
-+ }
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) {
-+ strcat(hcd_status_str, "device_mode ");
-+ }
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) {
-+ strcat(hcd_status_str, "host_mode ");
-+ }
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) {
-+ strcat(hcd_status_str, "started ");
-+ }
-+ if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) {
-+ strcat(hcd_status_str, "running ");
-+ }
-+ return hcd_status_str;
-+}
-+
-+
-+char* sblist_to_str(struct USB_SB_Desc* sb_desc) {
-+ static char sblist_to_str_buff[128];
-+ char tmp[32], tmp2[32];
-+ sblist_to_str_buff[0] = '\0';
-+ while(sb_desc != NULL) {
-+ switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) {
-+ case 0: sprintf(tmp, "zout"); break;
-+ case 1: sprintf(tmp, "in"); break;
-+ case 2: sprintf(tmp, "out"); break;
-+ case 3: sprintf(tmp, "setup"); break;
-+ }
-+ sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len);
-+ strcat(sblist_to_str_buff, tmp2);
-+ if(sb_desc->next != 0) {
-+ sb_desc = phys_to_virt(sb_desc->next);
-+ } else {
-+ sb_desc = NULL;
-+ }
-+ }
-+ return sblist_to_str_buff;
-+}
-+
-+char* port_status_to_str(__u16 wPortStatus) {
-+ static char port_status_str[128];
-+ port_status_str[0] = '\0';
-+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) {
-+ strcat(port_status_str, "connected ");
-+ }
-+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) {
-+ strcat(port_status_str, "enabled ");
-+ }
-+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) {
-+ strcat(port_status_str, "suspended ");
-+ }
-+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) {
-+ strcat(port_status_str, "reset ");
-+ }
-+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) {
-+ strcat(port_status_str, "full-speed ");
-+ } else {
-+ strcat(port_status_str, "low-speed ");
-+ }
-+ return port_status_str;
-+}
-+
-+
-+char* endpoint_to_str(struct usb_endpoint_descriptor *ed) {
-+ static char endpoint_to_str_buff[128];
-+ char tmp[32];
-+ int epnum = ed->bEndpointAddress & 0x0F;
-+ int dir = ed->bEndpointAddress & 0x80;
-+ int type = ed->bmAttributes & 0x03;
-+ endpoint_to_str_buff[0] = '\0';
-+ sprintf(endpoint_to_str_buff, "ep:%d ", epnum);
-+ switch(type) {
-+ case 0:
-+ sprintf(tmp, " ctrl");
-+ break;
-+ case 1:
-+ sprintf(tmp, " isoc");
-+ break;
-+ case 2:
-+ sprintf(tmp, " bulk");
-+ break;
-+ case 3:
-+ sprintf(tmp, " intr");
-+ break;
-+ }
-+ strcat(endpoint_to_str_buff, tmp);
-+ if(dir) {
-+ sprintf(tmp, " in");
-+ } else {
-+ sprintf(tmp, " out");
-+ }
-+ strcat(endpoint_to_str_buff, tmp);
-+
-+ return endpoint_to_str_buff;
-+}
-+
-+/* Debug helper functions for Transfer Controller */
-+char* pipe_to_str(unsigned int pipe) {
-+ static char pipe_to_str_buff[128];
-+ char tmp[64];
-+ sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe));
-+ sprintf(tmp, " type:%s", str_type(pipe));
-+ strcat(pipe_to_str_buff, tmp);
-+
-+ sprintf(tmp, " dev:%d", usb_pipedevice(pipe));
-+ strcat(pipe_to_str_buff, tmp);
-+ sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe));
-+ strcat(pipe_to_str_buff, tmp);
-+ return pipe_to_str_buff;
-+}
-+
-+
-+#define USB_DEBUG_DESC 1
-+
-+#ifdef USB_DEBUG_DESC
-+#define dump_in_desc(x) __dump_in_desc(x)
-+#define dump_sb_desc(...) __dump_sb_desc(...)
-+#define dump_ep_desc(x) __dump_ep_desc(x)
-+#define dump_ept_data(x) __dump_ept_data(x)
-+#else
-+#define dump_in_desc(...) do {} while (0)
-+#define dump_sb_desc(...) do {} while (0)
-+#define dump_ep_desc(...) do {} while (0)
-+#endif
-+
-+
-+/* Uncomment this to enable massive function call trace
-+ #define USB_DEBUG_TRACE */
-+
-+#ifdef USB_DEBUG_TRACE
-+#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__))
-+#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__))
-+#else
-+#define DBFENTER do {} while (0)
-+#define DBFEXIT do {} while (0)
-+#endif
-+
-+#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \
-+{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);}
-+
-+/* Most helpful debugging aid */
-+#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__))))
-+
-+
-+/***************************************************************************/
-+/***************************************************************************/
-+/* Forward declarations */
-+/***************************************************************************/
-+/***************************************************************************/
-+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg);
-+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg);
-+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg);
-+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg);
-+
-+void rh_port_status_change(__u16[]);
-+int rh_clear_port_feature(__u8, __u16);
-+int rh_set_port_feature(__u8, __u16);
-+static void rh_disable_port(unsigned int port);
-+
-+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd,
-+ int timer);
-+
-+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb,
-+ int mem_flags);
-+static void tc_free_epid(struct usb_host_endpoint *ep);
-+static int tc_allocate_epid(void);
-+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status);
-+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb,
-+ int status);
-+
-+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid,
-+ int mem_flags);
-+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb);
-+
-+static inline struct urb *urb_list_first(int epid);
-+static inline void urb_list_add(struct urb *urb, int epid,
-+ int mem_flags);
-+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid);
-+static inline void urb_list_del(struct urb *urb, int epid);
-+static inline void urb_list_move_last(struct urb *urb, int epid);
-+static inline struct urb *urb_list_next(struct urb *urb, int epid);
-+
-+int create_sb_for_urb(struct urb *urb, int mem_flags);
-+int init_intr_urb(struct urb *urb, int mem_flags);
-+
-+static inline void etrax_epid_set(__u8 index, __u32 data);
-+static inline void etrax_epid_clear_error(__u8 index);
-+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout,
-+ __u8 toggle);
-+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout);
-+static inline __u32 etrax_epid_get(__u8 index);
-+
-+/* We're accessing the same register position in Etrax so
-+ when we do full access the internal difference doesn't matter */
-+#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data)
-+#define etrax_epid_iso_get(index) etrax_epid_get(index)
-+
-+
-+static void tc_dma_process_isoc_urb(struct urb *urb);
-+static void tc_dma_process_queue(int epid);
-+static void tc_dma_unlink_intr_urb(struct urb *urb);
-+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc);
-+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc);
-+
-+static void tc_bulk_start_timer_func(unsigned long dummy);
-+static void tc_bulk_eot_timer_func(unsigned long dummy);
-+
-+
-+/*************************************************************/
-+/*************************************************************/
-+/* Host Controler Driver block */
-+/*************************************************************/
-+/*************************************************************/
-+
-+/* HCD operations */
-+static irqreturn_t crisv10_hcd_top_irq(int irq, void*);
-+static int crisv10_hcd_reset(struct usb_hcd *);
-+static int crisv10_hcd_start(struct usb_hcd *);
-+static void crisv10_hcd_stop(struct usb_hcd *);
-+#ifdef CONFIG_PM
-+static int crisv10_hcd_suspend(struct device *, u32, u32);
-+static int crisv10_hcd_resume(struct device *, u32);
-+#endif /* CONFIG_PM */
-+static int crisv10_hcd_get_frame(struct usb_hcd *);
-+
-+static int tc_urb_enqueue(struct usb_hcd *, struct usb_host_endpoint *ep, struct urb *, gfp_t mem_flags);
-+static int tc_urb_dequeue(struct usb_hcd *, struct urb *);
-+static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep);
-+
-+static int rh_status_data_request(struct usb_hcd *, char *);
-+static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16);
-+
-+#ifdef CONFIG_PM
-+static int crisv10_hcd_hub_suspend(struct usb_hcd *);
-+static int crisv10_hcd_hub_resume(struct usb_hcd *);
-+#endif /* CONFIG_PM */
-+#ifdef CONFIG_USB_OTG
-+static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned);
-+#endif /* CONFIG_USB_OTG */
-+
-+/* host controller driver interface */
-+static const struct hc_driver crisv10_hc_driver =
-+ {
-+ .description = hc_name,
-+ .product_desc = product_desc,
-+ .hcd_priv_size = sizeof(struct crisv10_hcd),
-+
-+ /* Attaching IRQ handler manualy in probe() */
-+ /* .irq = crisv10_hcd_irq, */
-+
-+ .flags = HCD_USB11,
-+
-+ /* called to init HCD and root hub */
-+ .reset = crisv10_hcd_reset,
-+ .start = crisv10_hcd_start,
-+
-+ /* cleanly make HCD stop writing memory and doing I/O */
-+ .stop = crisv10_hcd_stop,
-+
-+ /* return current frame number */
-+ .get_frame_number = crisv10_hcd_get_frame,
-+
-+
-+ /* Manage i/o requests via the Transfer Controller */
-+ .urb_enqueue = tc_urb_enqueue,
-+ .urb_dequeue = tc_urb_dequeue,
-+
-+ /* hw synch, freeing endpoint resources that urb_dequeue can't */
-+ .endpoint_disable = tc_endpoint_disable,
-+
-+
-+ /* Root Hub support */
-+ .hub_status_data = rh_status_data_request,
-+ .hub_control = rh_control_request,
-+#ifdef CONFIG_PM
-+ .hub_suspend = rh_suspend_request,
-+ .hub_resume = rh_resume_request,
-+#endif /* CONFIG_PM */
-+#ifdef CONFIG_USB_OTG
-+ .start_port_reset = crisv10_hcd_start_port_reset,
-+#endif /* CONFIG_USB_OTG */
-+ };
-+
-+
-+/*
-+ * conversion between pointers to a hcd and the corresponding
-+ * crisv10_hcd
-+ */
-+
-+static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd)
-+{
-+ return (struct crisv10_hcd *) hcd->hcd_priv;
-+}
-+
-+static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd)
-+{
-+ return container_of((void *) hcd, struct usb_hcd, hcd_priv);
-+}
-+
-+/* check if specified port is in use */
-+static inline int port_in_use(unsigned int port)
-+{
-+ return ports & (1 << port);
-+}
-+
-+/* number of ports in use */
-+static inline unsigned int num_ports(void)
-+{
-+ unsigned int i, num = 0;
-+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++)
-+ if (port_in_use(i))
-+ num++;
-+ return num;
-+}
-+
-+/* map hub port number to the port number used internally by the HC */
-+static inline unsigned int map_port(unsigned int port)
-+{
-+ unsigned int i, num = 0;
-+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++)
-+ if (port_in_use(i))
-+ if (++num == port)
-+ return i;
-+ return -1;
-+}
-+
-+/* size of descriptors in slab cache */
-+#ifndef MAX
-+#define MAX(x, y) ((x) > (y) ? (x) : (y))
-+#endif
-+
-+
-+/******************************************************************/
-+/* Hardware Interrupt functions */
-+/******************************************************************/
-+
-+/* Fast interrupt handler for HC */
-+static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd)
-+{
-+ struct usb_hcd *hcd = vcd;
-+ struct crisv10_irq_reg reg;
-+ __u32 irq_mask;
-+ unsigned long flags;
-+
-+ DBFENTER;
-+
-+ ASSERT(hcd != NULL);
-+ reg.hcd = hcd;
-+
-+ /* Turn of other interrupts while handling these sensitive cases */
-+ local_irq_save(flags);
-+
-+ /* Read out which interrupts that are flaged */
-+ irq_mask = *R_USB_IRQ_MASK_READ;
-+ reg.r_usb_irq_mask_read = irq_mask;
-+
-+ /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that
-+ R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter
-+ clears the ourun and perror fields of R_USB_STATUS. */
-+ reg.r_usb_status = *R_USB_STATUS;
-+
-+ /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn
-+ interrupts. */
-+ reg.r_usb_epid_attn = *R_USB_EPID_ATTN;
-+
-+ /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the
-+ port_status interrupt. */
-+ reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1;
-+ reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2;
-+
-+ /* Reading R_USB_FM_NUMBER clears the sof interrupt. */
-+ /* Note: the lower 11 bits contain the actual frame number, sent with each
-+ sof. */
-+ reg.r_usb_fm_number = *R_USB_FM_NUMBER;
-+
-+ /* Interrupts are handled in order of priority. */
-+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) {
-+ crisv10_hcd_port_status_irq(&reg);
-+ }
-+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) {
-+ crisv10_hcd_epid_attn_irq(&reg);
-+ }
-+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) {
-+ crisv10_hcd_ctl_status_irq(&reg);
-+ }
-+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) {
-+ crisv10_hcd_isoc_eof_irq(&reg);
-+ }
-+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) {
-+ /* Update/restart the bulk start timer since obviously the channel is
-+ running. */
-+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
-+ /* Update/restart the bulk eot timer since we just received an bulk eot
-+ interrupt. */
-+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-+
-+ /* Check for finished bulk transfers on epids */
-+ check_finished_bulk_tx_epids(hcd, 0);
-+ }
-+ local_irq_restore(flags);
-+
-+ DBFEXIT;
-+ return IRQ_HANDLED;
-+}
-+
-+
-+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) {
-+ struct usb_hcd *hcd = reg->hcd;
-+ struct crisv10_urb_priv *urb_priv;
-+ int epid;
-+ DBFENTER;
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ if (test_bit(epid, (void *)&reg->r_usb_epid_attn)) {
-+ struct urb *urb;
-+ __u32 ept_data;
-+ int error_code;
-+
-+ if (epid == DUMMY_EPID || epid == INVALID_EPID) {
-+ /* We definitely don't care about these ones. Besides, they are
-+ always disabled, so any possible disabling caused by the
-+ epid attention interrupt is irrelevant. */
-+ warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid);
-+ continue;
-+ }
-+
-+ if(!epid_inuse(epid)) {
-+ irq_err("Epid attention on epid:%d that isn't in use\n", epid);
-+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
-+ debug_epid(epid);
-+ continue;
-+ }
-+
-+ /* Note that although there are separate R_USB_EPT_DATA and
-+ R_USB_EPT_DATA_ISO registers, they are located at the same address and
-+ are of the same size. In other words, this read should be ok for isoc
-+ also. */
-+ ept_data = etrax_epid_get(epid);
-+ error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data);
-+
-+ /* Get the active URB for this epid. We blatantly assume
-+ that only this URB could have caused the epid attention. */
-+ urb = activeUrbList[epid];
-+ if (urb == NULL) {
-+ irq_err("Attention on epid:%d error:%d with no active URB.\n",
-+ epid, error_code);
-+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
-+ debug_epid(epid);
-+ continue;
-+ }
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */
-+ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-+
-+ /* Isoc traffic doesn't have error_count_in/error_count_out. */
-+ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) &&
-+ (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 ||
-+ IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) {
-+ /* Check if URB allready is marked for late-finish, we can get
-+ several 3rd error for Intr traffic when a device is unplugged */
-+ if(urb_priv->later_data == NULL) {
-+ /* 3rd error. */
-+ irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid,
-+ str_dir(urb->pipe), str_type(urb->pipe),
-+ (unsigned int)urb, urb_priv->urb_num);
-+
-+ tc_finish_urb_later(hcd, urb, -EPROTO);
-+ }
-+
-+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
-+ irq_warn("Perror for epid:%d\n", epid);
-+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff);
-+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
-+ __dump_urb(urb);
-+ debug_epid(epid);
-+
-+ if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) {
-+ /* invalid ep_id */
-+ panic("Perror because of invalid epid."
-+ " Deconfigured too early?");
-+ } else {
-+ /* past eof1, near eof, zout transfer, setup transfer */
-+ /* Dump the urb and the relevant EP descriptor. */
-+ panic("Something wrong with DMA descriptor contents."
-+ " Too much traffic inserted?");
-+ }
-+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
-+ /* buffer ourun */
-+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff);
-+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
-+ __dump_urb(urb);
-+ debug_epid(epid);
-+
-+ panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid);
-+ } else {
-+ irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid,
-+ str_dir(urb->pipe), str_type(urb->pipe));
-+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status);
-+ __dump_urb(urb);
-+ debug_epid(epid);
-+ }
-+
-+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
-+ stall)) {
-+ /* Not really a protocol error, just says that the endpoint gave
-+ a stall response. Note that error_code cannot be stall for isoc. */
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ panic("Isoc traffic cannot stall");
-+ }
-+
-+ tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid,
-+ str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb);
-+ tc_finish_urb(hcd, urb, -EPIPE);
-+
-+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
-+ bus_error)) {
-+ /* Two devices responded to a transaction request. Must be resolved
-+ by software. FIXME: Reset ports? */
-+ panic("Bus error for epid %d."
-+ " Two devices responded to transaction request\n",
-+ epid);
-+
-+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code,
-+ buffer_error)) {
-+ /* DMA overrun or underrun. */
-+ irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid,
-+ str_dir(urb->pipe), str_type(urb->pipe));
-+
-+ /* It seems that error_code = buffer_error in
-+ R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS
-+ are the same error. */
-+ tc_finish_urb(hcd, urb, -EPROTO);
-+ } else {
-+ irq_warn("Unknown attention on epid:%d (%s %s)\n", epid,
-+ str_dir(urb->pipe), str_type(urb->pipe));
-+ dump_ept_data(epid);
-+ }
-+ }
-+ }
-+ DBFEXIT;
-+}
-+
-+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg)
-+{
-+ __u16 port_reg[USB_ROOT_HUB_PORTS];
-+ DBFENTER;
-+ port_reg[0] = reg->r_usb_rh_port_status_1;
-+ port_reg[1] = reg->r_usb_rh_port_status_2;
-+ rh_port_status_change(port_reg);
-+ DBFEXIT;
-+}
-+
-+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg)
-+{
-+ int epid;
-+ struct urb *urb;
-+ struct crisv10_urb_priv *urb_priv;
-+
-+ DBFENTER;
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
-+
-+ /* Only check epids that are in use, is valid and has SB list */
-+ if (!epid_inuse(epid) || epid == INVALID_EPID ||
-+ TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) {
-+ /* Nothing here to see. */
-+ continue;
-+ }
-+ ASSERT(epid_isoc(epid));
-+
-+ /* Get the active URB for this epid (if any). */
-+ urb = activeUrbList[epid];
-+ if (urb == 0) {
-+ isoc_warn("Ignoring NULL urb for epid:%d\n", epid);
-+ continue;
-+ }
-+ if(!epid_out_traffic(epid)) {
-+ /* Sanity check. */
-+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ if (urb_priv->urb_state == NOT_STARTED) {
-+ /* If ASAP is not set and urb->start_frame is the current frame,
-+ start the transfer. */
-+ if (!(urb->transfer_flags & URB_ISO_ASAP) &&
-+ (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) {
-+ /* EP should not be enabled if we're waiting for start_frame */
-+ ASSERT((TxIsocEPList[epid].command &
-+ IO_STATE(USB_EP_command, enable, yes)) == 0);
-+
-+ isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid);
-+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-+
-+ /* This urb is now active. */
-+ urb_priv->urb_state = STARTED;
-+ continue;
-+ }
-+ }
-+ }
-+ }
-+
-+ DBFEXIT;
-+}
-+
-+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg)
-+{
-+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd);
-+
-+ DBFENTER;
-+ ASSERT(crisv10_hcd);
-+
-+ irq_dbg("ctr_status_irq, controller status: %s\n",
-+ hcd_status_to_str(reg->r_usb_status));
-+
-+ /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB
-+ list for the corresponding epid? */
-+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) {
-+ panic("USB controller got ourun.");
-+ }
-+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) {
-+
-+ /* Before, etrax_usb_do_intr_recover was called on this epid if it was
-+ an interrupt pipe. I don't see how re-enabling all EP descriptors
-+ will help if there was a programming error. */
-+ panic("USB controller got perror.");
-+ }
-+
-+ /* Keep track of USB Controller, if it's running or not */
-+ if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) {
-+ crisv10_hcd->running = 1;
-+ } else {
-+ crisv10_hcd->running = 0;
-+ }
-+
-+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) {
-+ /* We should never operate in device mode. */
-+ panic("USB controller in device mode.");
-+ }
-+
-+ /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably
-+ using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */
-+ set_bit(HCD_FLAG_SAW_IRQ, &reg->hcd->flags);
-+
-+ DBFEXIT;
-+}
-+
-+
-+/******************************************************************/
-+/* Host Controller interface functions */
-+/******************************************************************/
-+
-+static inline void crisv10_ready_wait(void) {
-+ volatile int timeout = 10000;
-+ /* Check the busy bit of USB controller in Etrax */
-+ while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for USB controller to be idle\n");
-+ }
-+}
-+
-+/* reset host controller */
-+static int crisv10_hcd_reset(struct usb_hcd *hcd)
-+{
-+ DBFENTER;
-+ hcd_dbg(hcd, "reset\n");
-+
-+
-+ /* Reset the USB interface. */
-+ /*
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
-+ nop();
-+ */
-+ DBFEXIT;
-+ return 0;
-+}
-+
-+/* start host controller */
-+static int crisv10_hcd_start(struct usb_hcd *hcd)
-+{
-+ DBFENTER;
-+ hcd_dbg(hcd, "start\n");
-+
-+ crisv10_ready_wait();
-+
-+ /* Start processing of USB traffic. */
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
-+
-+ nop();
-+
-+ hcd->state = HC_STATE_RUNNING;
-+
-+ DBFEXIT;
-+ return 0;
-+}
-+
-+/* stop host controller */
-+static void crisv10_hcd_stop(struct usb_hcd *hcd)
-+{
-+ DBFENTER;
-+ hcd_dbg(hcd, "stop\n");
-+ crisv10_hcd_reset(hcd);
-+ DBFEXIT;
-+}
-+
-+/* return the current frame number */
-+static int crisv10_hcd_get_frame(struct usb_hcd *hcd)
-+{
-+ DBFENTER;
-+ DBFEXIT;
-+ return (*R_USB_FM_NUMBER & 0x7ff);
-+}
-+
-+#ifdef CONFIG_USB_OTG
-+
-+static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port)
-+{
-+ return 0; /* no-op for now */
-+}
-+
-+#endif /* CONFIG_USB_OTG */
-+
-+
-+/******************************************************************/
-+/* Root Hub functions */
-+/******************************************************************/
-+
-+/* root hub status */
-+static const struct usb_hub_status rh_hub_status =
-+ {
-+ .wHubStatus = 0,
-+ .wHubChange = 0,
-+ };
-+
-+/* root hub descriptor */
-+static const u8 rh_hub_descr[] =
-+ {
-+ 0x09, /* bDescLength */
-+ 0x29, /* bDescriptorType */
-+ USB_ROOT_HUB_PORTS, /* bNbrPorts */
-+ 0x00, /* wHubCharacteristics */
-+ 0x00,
-+ 0x01, /* bPwrOn2pwrGood */
-+ 0x00, /* bHubContrCurrent */
-+ 0x00, /* DeviceRemovable */
-+ 0xff /* PortPwrCtrlMask */
-+ };
-+
-+/* Actual holder of root hub status*/
-+struct crisv10_rh rh;
-+
-+/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */
-+int rh_init(void) {
-+ int i;
-+ /* Reset port status flags */
-+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) {
-+ rh.wPortChange[i] = 0;
-+ rh.wPortStatusPrev[i] = 0;
-+ }
-+ return 0;
-+}
-+
-+#define RH_FEAT_MASK ((1<<USB_PORT_FEAT_CONNECTION)|\
-+ (1<<USB_PORT_FEAT_ENABLE)|\
-+ (1<<USB_PORT_FEAT_SUSPEND)|\
-+ (1<<USB_PORT_FEAT_RESET))
-+
-+/* Handle port status change interrupt (called from bottom part interrupt) */
-+void rh_port_status_change(__u16 port_reg[]) {
-+ int i;
-+ __u16 wChange;
-+
-+ for(i = 0; i < USB_ROOT_HUB_PORTS; i++) {
-+ /* Xor out changes since last read, masked for important flags */
-+ wChange = (port_reg[i] & RH_FEAT_MASK) ^ rh.wPortStatusPrev[i];
-+ /* Or changes together with (if any) saved changes */
-+ rh.wPortChange[i] |= wChange;
-+ /* Save new status */
-+ rh.wPortStatusPrev[i] = port_reg[i];
-+
-+ if(wChange) {
-+ rh_dbg("Interrupt port_status change port%d: %s Current-status:%s\n", i+1,
-+ port_status_to_str(wChange),
-+ port_status_to_str(port_reg[i]));
-+ }
-+ }
-+}
-+
-+/* Construct port status change bitmap for the root hub */
-+static int rh_status_data_request(struct usb_hcd *hcd, char *buf)
-+{
-+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
-+ unsigned int i;
-+
-+ DBFENTER;
-+ /*
-+ * corresponds to hub status change EP (USB 2.0 spec section 11.13.4)
-+ * return bitmap indicating ports with status change
-+ */
-+ *buf = 0;
-+ spin_lock(&crisv10_hcd->lock);
-+ for (i = 1; i <= crisv10_hcd->num_ports; i++) {
-+ if (rh.wPortChange[map_port(i)]) {
-+ *buf |= (1 << i);
-+ rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i,
-+ port_status_to_str(rh.wPortChange[map_port(i)]),
-+ port_status_to_str(rh.wPortStatusPrev[map_port(i)]));
-+ }
-+ }
-+ spin_unlock(&crisv10_hcd->lock);
-+ DBFEXIT;
-+ return *buf == 0 ? 0 : 1;
-+}
-+
-+/* Handle a control request for the root hub (called from hcd_driver) */
-+static int rh_control_request(struct usb_hcd *hcd,
-+ u16 typeReq,
-+ u16 wValue,
-+ u16 wIndex,
-+ char *buf,
-+ u16 wLength) {
-+
-+ struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd);
-+ int retval = 0;
-+ int len;
-+ DBFENTER;
-+
-+ switch (typeReq) {
-+ case GetHubDescriptor:
-+ rh_dbg("GetHubDescriptor\n");
-+ len = min_t(unsigned int, sizeof rh_hub_descr, wLength);
-+ memcpy(buf, rh_hub_descr, len);
-+ buf[2] = crisv10_hcd->num_ports;
-+ break;
-+ case GetHubStatus:
-+ rh_dbg("GetHubStatus\n");
-+ len = min_t(unsigned int, sizeof rh_hub_status, wLength);
-+ memcpy(buf, &rh_hub_status, len);
-+ break;
-+ case GetPortStatus:
-+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
-+ goto error;
-+ rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex,
-+ port_status_to_str(rh.wPortChange[map_port(wIndex)]),
-+ port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)]));
-+ *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]);
-+ *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]);
-+ break;
-+ case SetHubFeature:
-+ rh_dbg("SetHubFeature\n");
-+ case ClearHubFeature:
-+ rh_dbg("ClearHubFeature\n");
-+ switch (wValue) {
-+ case C_HUB_OVER_CURRENT:
-+ case C_HUB_LOCAL_POWER:
-+ rh_warn("Not implemented hub request:%d \n", typeReq);
-+ /* not implemented */
-+ break;
-+ default:
-+ goto error;
-+ }
-+ break;
-+ case SetPortFeature:
-+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
-+ goto error;
-+ if(rh_set_port_feature(map_port(wIndex), wValue))
-+ goto error;
-+ break;
-+ case ClearPortFeature:
-+ if (!wIndex || wIndex > crisv10_hcd->num_ports)
-+ goto error;
-+ if(rh_clear_port_feature(map_port(wIndex), wValue))
-+ goto error;
-+ break;
-+ default:
-+ rh_warn("Unknown hub request: %d\n", typeReq);
-+ error:
-+ retval = -EPIPE;
-+ }
-+ DBFEXIT;
-+ return retval;
-+}
-+
-+int rh_set_port_feature(__u8 bPort, __u16 wFeature) {
-+ __u8 bUsbCommand = 0;
-+ switch(wFeature) {
-+ case USB_PORT_FEAT_RESET:
-+ rh_dbg("SetPortFeature: reset\n");
-+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset);
-+ goto set;
-+ break;
-+ case USB_PORT_FEAT_SUSPEND:
-+ rh_dbg("SetPortFeature: suspend\n");
-+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend);
-+ goto set;
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ rh_dbg("SetPortFeature: power\n");
-+ break;
-+ case USB_PORT_FEAT_C_CONNECTION:
-+ rh_dbg("SetPortFeature: c_connection\n");
-+ break;
-+ case USB_PORT_FEAT_C_RESET:
-+ rh_dbg("SetPortFeature: c_reset\n");
-+ break;
-+ case USB_PORT_FEAT_C_OVER_CURRENT:
-+ rh_dbg("SetPortFeature: c_over_current\n");
-+ break;
-+
-+ set:
-+ /* Select which port via the port_sel field */
-+ bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1);
-+
-+ /* Make sure the controller isn't busy. */
-+ crisv10_ready_wait();
-+ /* Send out the actual command to the USB controller */
-+ *R_USB_COMMAND = bUsbCommand;
-+
-+ /* If port reset then also bring USB controller into running state */
-+ if(wFeature == USB_PORT_FEAT_RESET) {
-+ /* Wait a while for controller to first become started after port reset */
-+ udelay(12000); /* 12ms blocking wait */
-+
-+ /* Make sure the controller isn't busy. */
-+ crisv10_ready_wait();
-+
-+ /* If all enabled ports were disabled the host controller goes down into
-+ started mode, so we need to bring it back into the running state.
-+ (This is safe even if it's already in the running state.) */
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
-+ }
-+
-+ break;
-+ default:
-+ rh_dbg("SetPortFeature: unknown feature\n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+int rh_clear_port_feature(__u8 bPort, __u16 wFeature) {
-+ switch(wFeature) {
-+ case USB_PORT_FEAT_ENABLE:
-+ rh_dbg("ClearPortFeature: enable\n");
-+ rh_disable_port(bPort);
-+ break;
-+ case USB_PORT_FEAT_SUSPEND:
-+ rh_dbg("ClearPortFeature: suspend\n");
-+ break;
-+ case USB_PORT_FEAT_POWER:
-+ rh_dbg("ClearPortFeature: power\n");
-+ break;
-+
-+ case USB_PORT_FEAT_C_ENABLE:
-+ rh_dbg("ClearPortFeature: c_enable\n");
-+ goto clear;
-+ case USB_PORT_FEAT_C_SUSPEND:
-+ rh_dbg("ClearPortFeature: c_suspend\n");
-+ goto clear;
-+ case USB_PORT_FEAT_C_CONNECTION:
-+ rh_dbg("ClearPortFeature: c_connection\n");
-+ goto clear;
-+ case USB_PORT_FEAT_C_OVER_CURRENT:
-+ rh_dbg("ClearPortFeature: c_over_current\n");
-+ goto clear;
-+ case USB_PORT_FEAT_C_RESET:
-+ rh_dbg("ClearPortFeature: c_reset\n");
-+ goto clear;
-+ clear:
-+ rh.wPortChange[bPort] &= ~(1 << (wFeature - 16));
-+ break;
-+ default:
-+ rh_dbg("ClearPortFeature: unknown feature\n");
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+
-+#ifdef CONFIG_PM
-+/* Handle a suspend request for the root hub (called from hcd_driver) */
-+static int rh_suspend_request(struct usb_hcd *hcd)
-+{
-+ return 0; /* no-op for now */
-+}
-+
-+/* Handle a resume request for the root hub (called from hcd_driver) */
-+static int rh_resume_request(struct usb_hcd *hcd)
-+{
-+ return 0; /* no-op for now */
-+}
-+#endif /* CONFIG_PM */
-+
-+
-+
-+/* Wrapper function for workaround port disable registers in USB controller */
-+static void rh_disable_port(unsigned int port) {
-+ volatile int timeout = 10000;
-+ volatile char* usb_portx_disable;
-+ switch(port) {
-+ case 0:
-+ usb_portx_disable = R_USB_PORT1_DISABLE;
-+ break;
-+ case 1:
-+ usb_portx_disable = R_USB_PORT2_DISABLE;
-+ break;
-+ default:
-+ /* Invalid port index */
-+ return;
-+ }
-+ /* Set disable flag in special register */
-+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
-+ /* Wait until not enabled anymore */
-+ while((rh.wPortStatusPrev[port] &
-+ IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for port %d to become disabled\n", port);
-+ }
-+ /* clear disable flag in special register */
-+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
-+ rh_info("Physical port %d disabled\n", port+1);
-+}
-+
-+
-+/******************************************************************/
-+/* Transfer Controller (TC) functions */
-+/******************************************************************/
-+
-+/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it
-+ dynamically?
-+ To adjust it dynamically we would have to get an interrupt when we reach
-+ the end of the rx descriptor list, or when we get close to the end, and
-+ then allocate more descriptors. */
-+#define NBR_OF_RX_DESC 512
-+#define RX_DESC_BUF_SIZE 1024
-+#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE)
-+
-+
-+/* Local variables for Transfer Controller */
-+/* --------------------------------------- */
-+
-+/* This is a circular (double-linked) list of the active urbs for each epid.
-+ The head is never removed, and new urbs are linked onto the list as
-+ urb_entry_t elements. Don't reference urb_list directly; use the wrapper
-+ functions instead (which includes spin_locks) */
-+static struct list_head urb_list[NBR_OF_EPIDS];
-+
-+/* Read about the need and usage of this lock in submit_ctrl_urb. */
-+/* Lock for URB lists for each EPID */
-+static spinlock_t urb_list_lock;
-+
-+/* Lock for EPID array register (R_USB_EPT_x) in Etrax */
-+static spinlock_t etrax_epid_lock;
-+
-+/* Lock for dma8 sub0 handling */
-+static spinlock_t etrax_dma8_sub0_lock;
-+
-+/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line.
-+ Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be
-+ cache aligned. */
-+static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32)));
-+static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4)));
-+
-+/* Pointers into RxDescList. */
-+static volatile struct USB_IN_Desc *myNextRxDesc;
-+static volatile struct USB_IN_Desc *myLastRxDesc;
-+
-+/* A zout transfer makes a memory access at the address of its buf pointer,
-+ which means that setting this buf pointer to 0 will cause an access to the
-+ flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes
-+ (depending on DMA burst size) transfer.
-+ Instead, we set it to 1, and point it to this buffer. */
-+static int zout_buffer[4] __attribute__ ((aligned (4)));
-+
-+/* Cache for allocating new EP and SB descriptors. */
-+static kmem_cache_t *usb_desc_cache;
-+
-+/* Cache for the data allocated in the isoc descr top half. */
-+static kmem_cache_t *isoc_compl_cache;
-+
-+/* Cache for the data allocated when delayed finishing of URBs */
-+static kmem_cache_t *later_data_cache;
-+
-+
-+/* Counter to keep track of how many Isoc EP we have sat up. Used to enable
-+ and disable iso_eof interrupt. We only need these interrupts when we have
-+ Isoc data endpoints (consumes CPU cycles).
-+ FIXME: This could be more fine granular, so this interrupt is only enabled
-+ when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */
-+static int isoc_epid_counter;
-+
-+/* Protecting wrapper functions for R_USB_EPT_x */
-+/* -------------------------------------------- */
-+static inline void etrax_epid_set(__u8 index, __u32 data) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
-+ nop();
-+ *R_USB_EPT_DATA = data;
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+}
-+
-+static inline void etrax_epid_clear_error(__u8 index) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
-+ nop();
-+ *R_USB_EPT_DATA &=
-+ ~(IO_MASK(R_USB_EPT_DATA, error_count_in) |
-+ IO_MASK(R_USB_EPT_DATA, error_count_out) |
-+ IO_MASK(R_USB_EPT_DATA, error_code));
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+}
-+
-+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout,
-+ __u8 toggle) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
-+ nop();
-+ if(dirout) {
-+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out);
-+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle);
-+ } else {
-+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in);
-+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle);
-+ }
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+}
-+
-+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) {
-+ unsigned long flags;
-+ __u8 toggle;
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
-+ nop();
-+ if (dirout) {
-+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA);
-+ } else {
-+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA);
-+ }
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+ return toggle;
-+}
-+
-+
-+static inline __u32 etrax_epid_get(__u8 index) {
-+ unsigned long flags;
-+ __u32 data;
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index);
-+ nop();
-+ data = *R_USB_EPT_DATA;
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+ return data;
-+}
-+
-+
-+
-+
-+/* Main functions for Transfer Controller */
-+/* -------------------------------------- */
-+
-+/* Init structs, memories and lists used by Transfer Controller */
-+int tc_init(struct usb_hcd *hcd) {
-+ int i;
-+ /* Clear software state info for all epids */
-+ memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS);
-+
-+ /* Set Invalid and Dummy as being in use and disabled */
-+ epid_state[INVALID_EPID].inuse = 1;
-+ epid_state[DUMMY_EPID].inuse = 1;
-+ epid_state[INVALID_EPID].disabled = 1;
-+ epid_state[DUMMY_EPID].disabled = 1;
-+
-+ /* Clear counter for how many Isoc epids we have sat up */
-+ isoc_epid_counter = 0;
-+
-+ /* Initialize the urb list by initiating a head for each list.
-+ Also reset list hodling active URB for each epid */
-+ for (i = 0; i < NBR_OF_EPIDS; i++) {
-+ INIT_LIST_HEAD(&urb_list[i]);
-+ activeUrbList[i] = NULL;
-+ }
-+
-+ /* Init lock for URB lists */
-+ spin_lock_init(&urb_list_lock);
-+ /* Init lock for Etrax R_USB_EPT register */
-+ spin_lock_init(&etrax_epid_lock);
-+ /* Init lock for Etrax dma8 sub0 handling */
-+ spin_lock_init(&etrax_dma8_sub0_lock);
-+
-+ /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */
-+
-+ /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also
-+ allocate SB descriptors from this cache. This is ok since
-+ sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */
-+ usb_desc_cache = kmem_cache_create("usb_desc_cache",
-+ sizeof(struct USB_EP_Desc), 0,
-+ SLAB_HWCACHE_ALIGN, 0, 0);
-+ if(usb_desc_cache == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+ /* Create slab cache for speedy allocation of memory for isoc bottom-half
-+ interrupt handling */
-+ isoc_compl_cache =
-+ kmem_cache_create("isoc_compl_cache",
-+ sizeof(struct crisv10_isoc_complete_data),
-+ 0, SLAB_HWCACHE_ALIGN, 0, 0);
-+ if(isoc_compl_cache == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+ /* Create slab cache for speedy allocation of memory for later URB finish
-+ struct */
-+ later_data_cache =
-+ kmem_cache_create("later_data_cache",
-+ sizeof(struct urb_later_data),
-+ 0, SLAB_HWCACHE_ALIGN, 0, 0);
-+ if(later_data_cache == NULL) {
-+ return -ENOMEM;
-+ }
-+
-+
-+ /* Initiate the bulk start timer. */
-+ init_timer(&bulk_start_timer);
-+ bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL;
-+ bulk_start_timer.function = tc_bulk_start_timer_func;
-+ add_timer(&bulk_start_timer);
-+
-+
-+ /* Initiate the bulk eot timer. */
-+ init_timer(&bulk_eot_timer);
-+ bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL;
-+ bulk_eot_timer.function = tc_bulk_eot_timer_func;
-+ bulk_eot_timer.data = (unsigned long)hcd;
-+ add_timer(&bulk_eot_timer);
-+
-+ return 0;
-+}
-+
-+/* Uninitialize all resources used by Transfer Controller */
-+void tc_destroy(void) {
-+
-+ /* Destroy all slab cache */
-+ kmem_cache_destroy(usb_desc_cache);
-+ kmem_cache_destroy(isoc_compl_cache);
-+ kmem_cache_destroy(later_data_cache);
-+
-+ /* Remove timers */
-+ del_timer(&bulk_start_timer);
-+ del_timer(&bulk_eot_timer);
-+}
-+
-+static void restart_dma8_sub0(void) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&etrax_dma8_sub0_lock, flags);
-+ /* Verify that the dma is not running */
-+ if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) {
-+ struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP);
-+ while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) {
-+ ep = (struct USB_EP_Desc *)phys_to_virt(ep->next);
-+ }
-+ /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID.
-+ * ep->next is already a physical address; no need for a virt_to_phys. */
-+ *R_DMA_CH8_SUB0_EP = ep->next;
-+ /* Restart the DMA */
-+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start);
-+ }
-+ spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags);
-+}
-+
-+/* queue an URB with the transfer controller (called from hcd_driver) */
-+static int tc_urb_enqueue(struct usb_hcd *hcd,
-+ struct usb_host_endpoint *ep,
-+ struct urb *urb,
-+ gfp_t mem_flags) {
-+ int epid;
-+ int retval;
-+ int bustime = 0;
-+ int maxpacket;
-+ unsigned long flags;
-+ struct crisv10_urb_priv *urb_priv;
-+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
-+ DBFENTER;
-+
-+ if(!(crisv10_hcd->running)) {
-+ /* The USB Controller is not running, probably because no device is
-+ attached. No idea to enqueue URBs then */
-+ tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n",
-+ (unsigned int)urb);
-+ return -ENOENT;
-+ }
-+
-+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-+ /* Special case check for In Isoc transfers. Specification states that each
-+ In Isoc transfer consists of one packet and therefore it should fit into
-+ the transfer-buffer of an URB.
-+ We do the check here to be sure (an invalid scenario can be produced with
-+ parameters to the usbtest suite) */
-+ if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) &&
-+ (urb->transfer_buffer_length < maxpacket)) {
-+ tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket);
-+ return -EMSGSIZE;
-+ }
-+
-+ /* Check if there is enough bandwidth for periodic transfer */
-+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) {
-+ /* only check (and later claim) if not already claimed */
-+ if (urb->bandwidth == 0) {
-+ bustime = usb_check_bandwidth(urb->dev, urb);
-+ if (bustime < 0) {
-+ tc_err("Not enough periodic bandwidth\n");
-+ return -ENOSPC;
-+ }
-+ }
-+ }
-+
-+ /* Check if there is a epid for URBs destination, if not this function
-+ set up one. */
-+ epid = tc_setup_epid(ep, urb, mem_flags);
-+ if (epid < 0) {
-+ tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb);
-+ DBFEXIT;
-+ return -ENOMEM;
-+ }
-+
-+ if(urb == activeUrbList[epid]) {
-+ tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb);
-+ return -ENXIO;
-+ }
-+
-+ if(urb_list_entry(urb, epid)) {
-+ tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb);
-+ return -ENXIO;
-+ }
-+
-+ /* If we actively have flaged endpoint as disabled then refuse submition */
-+ if(epid_state[epid].disabled) {
-+ return -ENOENT;
-+ }
-+
-+ /* Allocate and init HC-private data for URB */
-+ if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) {
-+ DBFEXIT;
-+ return -ENOMEM;
-+ }
-+ urb_priv = urb->hcpriv;
-+
-+ tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n",
-+ (unsigned int)urb, urb_priv->urb_num, epid,
-+ pipe_to_str(urb->pipe), urb->transfer_buffer_length);
-+
-+ /* Create and link SBs required for this URB */
-+ retval = create_sb_for_urb(urb, mem_flags);
-+ if(retval != 0) {
-+ tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb,
-+ urb_priv->urb_num);
-+ urb_priv_free(hcd, urb);
-+ DBFEXIT;
-+ return retval;
-+ }
-+
-+ /* Init intr EP pool if this URB is a INTR transfer. This pool is later
-+ used when inserting EPs in the TxIntrEPList. We do the alloc here
-+ so we can't run out of memory later */
-+ if(usb_pipeint(urb->pipe)) {
-+ retval = init_intr_urb(urb, mem_flags);
-+ if(retval != 0) {
-+ tc_warn("Failed to init Intr URB\n");
-+ urb_priv_free(hcd, urb);
-+ DBFEXIT;
-+ return retval;
-+ }
-+ }
-+
-+ /* Disable other access when inserting USB */
-+ local_irq_save(flags);
-+
-+ /* Claim bandwidth, if needed */
-+ if(bustime) {
-+ usb_claim_bandwidth(urb->dev, urb, bustime, 0);
-+ }
-+
-+ /* Add URB to EP queue */
-+ urb_list_add(urb, epid, mem_flags);
-+
-+ if(usb_pipeisoc(urb->pipe)) {
-+ /* Special processing of Isoc URBs. */
-+ tc_dma_process_isoc_urb(urb);
-+ } else {
-+ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */
-+ tc_dma_process_queue(epid);
-+ }
-+
-+ local_irq_restore(flags);
-+
-+ DBFEXIT;
-+ return 0;
-+}
-+
-+/* remove an URB from the transfer controller queues (called from hcd_driver)*/
-+static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) {
-+ struct crisv10_urb_priv *urb_priv;
-+ unsigned long flags;
-+ int epid;
-+
-+ DBFENTER;
-+ /* Disable interrupts here since a descriptor interrupt for the isoc epid
-+ will modify the sb list. This could possibly be done more granular, but
-+ urb_dequeue should not be used frequently anyway.
-+ */
-+ local_irq_save(flags);
-+
-+ urb_priv = urb->hcpriv;
-+
-+ if (!urb_priv) {
-+ /* This happens if a device driver calls unlink on an urb that
-+ was never submitted (lazy driver) or if the urb was completed
-+ while dequeue was being called. */
-+ tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb);
-+ local_irq_restore(flags);
-+ return 0;
-+ }
-+ epid = urb_priv->epid;
-+
-+ tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
-+ (urb == activeUrbList[epid]) ? "active" : "queued",
-+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), epid, urb->status,
-+ (urb_priv->later_data) ? "later-sched" : "");
-+
-+ /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB
-+ that isn't active can be dequeued by just removing it from the queue */
-+ if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) ||
-+ usb_pipeint(urb->pipe)) {
-+
-+ /* Check if URB haven't gone further than the queue */
-+ if(urb != activeUrbList[epid]) {
-+ ASSERT(urb_priv->later_data == NULL);
-+ tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue"
-+ " (not active)\n", (unsigned int)urb, urb_priv->urb_num,
-+ str_dir(urb->pipe), str_type(urb->pipe), epid);
-+
-+ /* Finish the URB with error status from USB core */
-+ tc_finish_urb(hcd, urb, urb->status);
-+ local_irq_restore(flags);
-+ return 0;
-+ }
-+ }
-+
-+ /* Set URB status to Unlink for handling when interrupt comes. */
-+ urb_priv->urb_state = UNLINK;
-+
-+ /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */
-+ switch(usb_pipetype(urb->pipe)) {
-+ case PIPE_BULK:
-+ /* Check if EP still is enabled */
-+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ /* The EP was enabled, disable it. */
-+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+ }
-+ /* Kicking dummy list out of the party. */
-+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
-+ break;
-+ case PIPE_CONTROL:
-+ /* Check if EP still is enabled */
-+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ /* The EP was enabled, disable it. */
-+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+ }
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ /* Disabling, busy-wait and unlinking of Isoc SBs will be done in
-+ finish_isoc_urb(). Because there might the case when URB is dequeued
-+ but there are other valid URBs waiting */
-+
-+ /* Check if In Isoc EP still is enabled */
-+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ /* The EP was enabled, disable it. */
-+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+ }
-+ break;
-+ case PIPE_INTERRUPT:
-+ /* Special care is taken for interrupt URBs. EPs are unlinked in
-+ tc_finish_urb */
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ /* Asynchronous unlink, finish the URB later from scheduled or other
-+ event (data finished, error) */
-+ tc_finish_urb_later(hcd, urb, urb->status);
-+
-+ local_irq_restore(flags);
-+ DBFEXIT;
-+ return 0;
-+}
-+
-+
-+static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) {
-+ volatile int timeout = 10000;
-+ struct urb* urb;
-+ struct crisv10_urb_priv* urb_priv;
-+ unsigned long flags;
-+
-+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */
-+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
-+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
-+
-+ int type = epid_state[epid].type;
-+
-+ /* Setting this flag will cause enqueue() to return -ENOENT for new
-+ submitions on this endpoint and finish_urb() wont process queue further */
-+ epid_state[epid].disabled = 1;
-+
-+ switch(type) {
-+ case PIPE_BULK:
-+ /* Check if EP still is enabled */
-+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ /* The EP was enabled, disable it. */
-+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid);
-+
-+ /* Do busy-wait until DMA not using this EP descriptor anymore */
-+ while((*R_DMA_CH8_SUB0_EP ==
-+ virt_to_phys(&TxBulkEPList[epid])) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for DMA-TX-Bulk to leave EP for"
-+ " epid:%d\n", epid);
-+ }
-+ }
-+ break;
-+
-+ case PIPE_CONTROL:
-+ /* Check if EP still is enabled */
-+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ /* The EP was enabled, disable it. */
-+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid);
-+
-+ /* Do busy-wait until DMA not using this EP descriptor anymore */
-+ while((*R_DMA_CH8_SUB1_EP ==
-+ virt_to_phys(&TxCtrlEPList[epid])) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for"
-+ " epid:%d\n", epid);
-+ }
-+ }
-+ break;
-+
-+ case PIPE_INTERRUPT:
-+ local_irq_save(flags);
-+ /* Disable all Intr EPs belonging to epid */
-+ first_ep = &TxIntrEPList[0];
-+ curr_ep = first_ep;
-+ do {
-+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
-+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
-+ /* Disable EP */
-+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
-+ }
-+ curr_ep = phys_to_virt(curr_ep->next);
-+ } while (curr_ep != first_ep);
-+
-+ local_irq_restore(flags);
-+ break;
-+
-+ case PIPE_ISOCHRONOUS:
-+ /* Check if EP still is enabled */
-+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid);
-+ /* The EP was enabled, disable it. */
-+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+
-+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for"
-+ " epid:%d\n", epid);
-+ }
-+ }
-+ break;
-+ }
-+
-+ local_irq_save(flags);
-+
-+ /* Finish if there is active URB for this endpoint */
-+ if(activeUrbList[epid] != NULL) {
-+ urb = activeUrbList[epid];
-+ urb_priv = urb->hcpriv;
-+ ASSERT(urb_priv);
-+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
-+ (urb == activeUrbList[epid]) ? "active" : "queued",
-+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), epid, urb->status,
-+ (urb_priv->later_data) ? "later-sched" : "");
-+
-+ tc_finish_urb(hcd, activeUrbList[epid], -ENOENT);
-+ ASSERT(activeUrbList[epid] == NULL);
-+ }
-+
-+ /* Finish any queued URBs for this endpoint. There won't be any resubmitions
-+ because epid_disabled causes enqueue() to fail for this endpoint */
-+ while((urb = urb_list_first(epid)) != NULL) {
-+ urb_priv = urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n",
-+ (urb == activeUrbList[epid]) ? "active" : "queued",
-+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), epid, urb->status,
-+ (urb_priv->later_data) ? "later-sched" : "");
-+
-+ tc_finish_urb(hcd, urb, -ENOENT);
-+ }
-+ epid_state[epid].disabled = 0;
-+ local_irq_restore(flags);
-+}
-+
-+/* free resources associated with an endpoint (called from hcd_driver) */
-+static void tc_endpoint_disable(struct usb_hcd *hcd,
-+ struct usb_host_endpoint *ep) {
-+ DBFENTER;
-+ /* Only free epid if it has been allocated. We get two endpoint_disable
-+ requests for ctrl endpoints so ignore the second one */
-+ if(ep->hcpriv != NULL) {
-+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
-+ int epid = ep_priv->epid;
-+ tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n",
-+ (unsigned int)ep, (unsigned int)ep->hcpriv,
-+ endpoint_to_str(&(ep->desc)), epid);
-+
-+ tc_sync_finish_epid(hcd, epid);
-+
-+ ASSERT(activeUrbList[epid] == NULL);
-+ ASSERT(list_empty(&urb_list[epid]));
-+
-+ tc_free_epid(ep);
-+ } else {
-+ tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep,
-+ (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc)));
-+ }
-+ DBFEXIT;
-+}
-+
-+static void tc_finish_urb_later_proc(void *data) {
-+ unsigned long flags;
-+ struct urb_later_data* uld = (struct urb_later_data*)data;
-+ local_irq_save(flags);
-+ if(uld->urb == NULL) {
-+ late_dbg("Later finish of URB = NULL (allready finished)\n");
-+ } else {
-+ struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv;
-+ ASSERT(urb_priv);
-+ if(urb_priv->urb_num == uld->urb_num) {
-+ late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb),
-+ urb_priv->urb_num);
-+ if(uld->status != uld->urb->status) {
-+ errno_dbg("Later-finish URB with status:%d, later-status:%d\n",
-+ uld->urb->status, uld->status);
-+ }
-+ if(uld != urb_priv->later_data) {
-+ panic("Scheduled uld not same as URBs uld\n");
-+ }
-+ tc_finish_urb(uld->hcd, uld->urb, uld->status);
-+ } else {
-+ late_warn("Ignoring later finish of URB:0x%x[%d]"
-+ ", urb_num doesn't match current URB:0x%x[%d]",
-+ (unsigned int)(uld->urb), uld->urb_num,
-+ (unsigned int)(uld->urb), urb_priv->urb_num);
-+ }
-+ }
-+ local_irq_restore(flags);
-+ kmem_cache_free(later_data_cache, uld);
-+}
-+
-+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb,
-+ int status) {
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ struct urb_later_data* uld;
-+
-+ ASSERT(urb_priv);
-+
-+ if(urb_priv->later_data != NULL) {
-+ /* Later-finish allready scheduled for this URB, just update status to
-+ return when finishing later */
-+ errno_dbg("Later-finish schedule change URB status:%d with new"
-+ " status:%d\n", urb_priv->later_data->status, status);
-+
-+ urb_priv->later_data->status = status;
-+ return;
-+ }
-+
-+ uld = kmem_cache_alloc(later_data_cache, SLAB_ATOMIC);
-+ ASSERT(uld);
-+
-+ uld->hcd = hcd;
-+ uld->urb = urb;
-+ uld->urb_num = urb_priv->urb_num;
-+ uld->status = status;
-+
-+ INIT_WORK(&uld->ws, tc_finish_urb_later_proc, uld);
-+ urb_priv->later_data = uld;
-+
-+ /* Schedule the finishing of the URB to happen later */
-+ schedule_delayed_work(&uld->ws, LATER_TIMER_DELAY);
-+}
-+
-+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb,
-+ int status);
-+
-+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) {
-+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd);
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ int epid;
-+ char toggle;
-+ int urb_num;
-+
-+ DBFENTER;
-+ ASSERT(urb_priv != NULL);
-+ epid = urb_priv->epid;
-+ urb_num = urb_priv->urb_num;
-+
-+ if(urb != activeUrbList[epid]) {
-+ if(urb_list_entry(urb, epid)) {
-+ /* Remove this URB from the list. Only happens when URB are finished
-+ before having been processed (dequeing) */
-+ urb_list_del(urb, epid);
-+ } else {
-+ tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for"
-+ " epid:%d\n", (unsigned int)urb, urb_num, epid);
-+ }
-+ }
-+
-+ /* Cancel any pending later-finish of this URB */
-+ if(urb_priv->later_data) {
-+ urb_priv->later_data->urb = NULL;
-+ }
-+
-+ /* For an IN pipe, we always set the actual length, regardless of whether
-+ there was an error or not (which means the device driver can use the data
-+ if it wants to). */
-+ if(usb_pipein(urb->pipe)) {
-+ urb->actual_length = urb_priv->rx_offset;
-+ } else {
-+ /* Set actual_length for OUT urbs also; the USB mass storage driver seems
-+ to want that. */
-+ if (status == 0 && urb->status == -EINPROGRESS) {
-+ urb->actual_length = urb->transfer_buffer_length;
-+ } else {
-+ /* We wouldn't know of any partial writes if there was an error. */
-+ urb->actual_length = 0;
-+ }
-+ }
-+
-+
-+ /* URB status mangling */
-+ if(urb->status == -EINPROGRESS) {
-+ /* The USB core hasn't changed the status, let's set our finish status */
-+ urb->status = status;
-+
-+ if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) &&
-+ usb_pipein(urb->pipe) &&
-+ (urb->actual_length != urb->transfer_buffer_length)) {
-+ /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's
-+ max length) is to be treated as an error. */
-+ errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short"
-+ " data:%d\n", (unsigned int)urb, urb_num,
-+ urb->actual_length);
-+ urb->status = -EREMOTEIO;
-+ }
-+
-+ if(urb_priv->urb_state == UNLINK) {
-+ /* URB has been requested to be unlinked asynchronously */
-+ urb->status = -ECONNRESET;
-+ errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n",
-+ (unsigned int)urb, urb_num, urb->status);
-+ }
-+ } else {
-+ /* The USB Core wants to signal some error via the URB, pass it through */
-+ }
-+
-+ /* use completely different finish function for Isoc URBs */
-+ if(usb_pipeisoc(urb->pipe)) {
-+ tc_finish_isoc_urb(hcd, urb, status);
-+ return;
-+ }
-+
-+ /* Do special unlinking of EPs for Intr traffic */
-+ if(usb_pipeint(urb->pipe)) {
-+ tc_dma_unlink_intr_urb(urb);
-+ }
-+
-+ /* Release allocated bandwidth for periodic transfers */
-+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe))
-+ usb_release_bandwidth(urb->dev, urb, 0);
-+
-+ /* This URB is active on EP */
-+ if(urb == activeUrbList[epid]) {
-+ /* We need to fiddle with the toggle bits because the hardware doesn't do
-+ it for us. */
-+ toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe));
-+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-+ usb_pipeout(urb->pipe), toggle);
-+
-+ /* Checks for Ctrl and Bulk EPs */
-+ switch(usb_pipetype(urb->pipe)) {
-+ case PIPE_BULK:
-+ /* Check so Bulk EP realy is disabled before finishing active URB */
-+ ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) ==
-+ IO_STATE(USB_EP_command, enable, no));
-+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to
-+ process Bulk EP. */
-+ TxBulkEPList[epid].sub = 0;
-+ /* No need to wait for the DMA before changing the next pointer.
-+ The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use
-+ the last one (INVALID_EPID) for actual traffic. */
-+ TxBulkEPList[epid].next =
-+ virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]);
-+ break;
-+ case PIPE_CONTROL:
-+ /* Check so Ctrl EP realy is disabled before finishing active URB */
-+ ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) ==
-+ IO_STATE(USB_EP_command, enable, no));
-+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to
-+ process Ctrl EP. */
-+ TxCtrlEPList[epid].sub = 0;
-+ break;
-+ }
-+ }
-+
-+ /* Free HC-private URB data*/
-+ urb_priv_free(hcd, urb);
-+
-+ if(urb->status) {
-+ errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n",
-+ (unsigned int)urb, urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), urb->actual_length, urb->status);
-+ } else {
-+ tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n",
-+ (unsigned int)urb, urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), urb->actual_length, urb->status);
-+ }
-+
-+ /* If we just finished an active URB, clear active pointer. */
-+ if (urb == activeUrbList[epid]) {
-+ /* Make URB not active on EP anymore */
-+ activeUrbList[epid] = NULL;
-+
-+ if(urb->status == 0) {
-+ /* URB finished sucessfully, process queue to see if there are any more
-+ URBs waiting before we call completion function.*/
-+ if(crisv10_hcd->running) {
-+ /* Only process queue if USB controller is running */
-+ tc_dma_process_queue(epid);
-+ } else {
-+ tc_warn("No processing of queue for epid:%d, USB Controller not"
-+ " running\n", epid);
-+ }
-+ }
-+ }
-+
-+ /* Hand the URB from HCD to its USB device driver, using its completion
-+ functions */
-+ usb_hcd_giveback_urb (hcd, urb);
-+
-+ /* Check the queue once more if the URB returned with error, because we
-+ didn't do it before the completion function because the specification
-+ states that the queue should not restart until all it's unlinked
-+ URBs have been fully retired, with the completion functions run */
-+ if(crisv10_hcd->running) {
-+ /* Only process queue if USB controller is running */
-+ tc_dma_process_queue(epid);
-+ } else {
-+ tc_warn("No processing of queue for epid:%d, USB Controller not running\n",
-+ epid);
-+ }
-+
-+ DBFEXIT;
-+}
-+
-+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb,
-+ int status) {
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ int epid, i;
-+ volatile int timeout = 10000;
-+
-+ ASSERT(urb_priv);
-+ epid = urb_priv->epid;
-+
-+ ASSERT(usb_pipeisoc(urb->pipe));
-+
-+ /* Set that all isoc packets have status and length set before
-+ completing the urb. */
-+ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){
-+ urb->iso_frame_desc[i].actual_length = 0;
-+ urb->iso_frame_desc[i].status = -EPROTO;
-+ }
-+
-+ /* Check if the URB is currently active (done or error) */
-+ if(urb == activeUrbList[epid]) {
-+ /* Check if there are another In Isoc URB queued for this epid */
-+ if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) {
-+ /* Move it from queue to active and mark it started so Isoc transfers
-+ won't be interrupted.
-+ All Isoc URBs data transfers are already added to DMA lists so we
-+ don't have to insert anything in DMA lists here. */
-+ activeUrbList[epid] = urb_list_first(epid);
-+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state =
-+ STARTED;
-+ urb_list_del(activeUrbList[epid], epid);
-+
-+ if(urb->status) {
-+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)"
-+ " status:%d, new waiting URB:0x%x[%d]\n",
-+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), urb_priv->isoc_packet_counter,
-+ urb->number_of_packets, urb->status,
-+ (unsigned int)activeUrbList[epid],
-+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num);
-+ }
-+
-+ } else { /* No other URB queued for this epid */
-+ if(urb->status) {
-+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)"
-+ " status:%d, no new URB waiting\n",
-+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe),
-+ str_type(urb->pipe), urb_priv->isoc_packet_counter,
-+ urb->number_of_packets, urb->status);
-+ }
-+
-+ /* Check if EP is still enabled, then shut it down. */
-+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid);
-+
-+ /* Should only occur for In Isoc EPs where SB isn't consumed. */
-+ ASSERT(usb_pipein(urb->pipe));
-+
-+ /* Disable it and wait for it to stop */
-+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable);
-+
-+ /* Ah, the luxury of busy-wait. */
-+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid);
-+ }
-+ }
-+
-+ /* Unlink SB to say that epid is finished. */
-+ TxIsocEPList[epid].sub = 0;
-+ TxIsocEPList[epid].hw_len = 0;
-+
-+ /* No URB active for EP anymore */
-+ activeUrbList[epid] = NULL;
-+ }
-+ } else { /* Finishing of not active URB (queued up with SBs thought) */
-+ isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d,"
-+ " SB queued but not active\n",
-+ (unsigned int)urb, str_dir(urb->pipe),
-+ urb_priv->isoc_packet_counter, urb->number_of_packets,
-+ urb->status);
-+ if(usb_pipeout(urb->pipe)) {
-+ /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */
-+ struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb;
-+
-+ iter_sb = TxIsocEPList[epid].sub ?
-+ phys_to_virt(TxIsocEPList[epid].sub) : 0;
-+ prev_sb = 0;
-+
-+ /* SB that is linked before this URBs first SB */
-+ while (iter_sb && (iter_sb != urb_priv->first_sb)) {
-+ prev_sb = iter_sb;
-+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
-+ }
-+
-+ if (iter_sb == 0) {
-+ /* Unlink of the URB currently being transmitted. */
-+ prev_sb = 0;
-+ iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0;
-+ }
-+
-+ while (iter_sb && (iter_sb != urb_priv->last_sb)) {
-+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
-+ }
-+
-+ if (iter_sb) {
-+ next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0;
-+ } else {
-+ /* This should only happen if the DMA has completed
-+ processing the SB list for this EP while interrupts
-+ are disabled. */
-+ isoc_dbg("Isoc urb not found, already sent?\n");
-+ next_sb = 0;
-+ }
-+ if (prev_sb) {
-+ prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0;
-+ } else {
-+ TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0;
-+ }
-+ }
-+ }
-+
-+ /* Free HC-private URB data*/
-+ urb_priv_free(hcd, urb);
-+
-+ usb_release_bandwidth(urb->dev, urb, 0);
-+
-+ /* Hand the URB from HCD to its USB device driver, using its completion
-+ functions */
-+ usb_hcd_giveback_urb (hcd, urb);
-+}
-+
-+static __u32 urb_num = 0;
-+
-+/* allocate and initialize URB private data */
-+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid,
-+ int mem_flags) {
-+ struct crisv10_urb_priv *urb_priv;
-+
-+ urb_priv = kmalloc(sizeof *urb_priv, mem_flags);
-+ if (!urb_priv)
-+ return -ENOMEM;
-+ memset(urb_priv, 0, sizeof *urb_priv);
-+
-+ urb_priv->epid = epid;
-+ urb_priv->urb_state = NOT_STARTED;
-+
-+ urb->hcpriv = urb_priv;
-+ /* Assign URB a sequence number, and increment counter */
-+ urb_priv->urb_num = urb_num;
-+ urb_num++;
-+ return 0;
-+}
-+
-+/* free URB private data */
-+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) {
-+ int i;
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ ASSERT(urb_priv != 0);
-+
-+ /* Check it has any SBs linked that needs to be freed*/
-+ if(urb_priv->first_sb != NULL) {
-+ struct USB_SB_Desc *next_sb, *first_sb, *last_sb;
-+ int i = 0;
-+ first_sb = urb_priv->first_sb;
-+ last_sb = urb_priv->last_sb;
-+ ASSERT(last_sb);
-+ while(first_sb != last_sb) {
-+ next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next);
-+ kmem_cache_free(usb_desc_cache, first_sb);
-+ first_sb = next_sb;
-+ i++;
-+ }
-+ kmem_cache_free(usb_desc_cache, last_sb);
-+ i++;
-+ }
-+
-+ /* Check if it has any EPs in its Intr pool that also needs to be freed */
-+ if(urb_priv->intr_ep_pool_length > 0) {
-+ for(i = 0; i < urb_priv->intr_ep_pool_length; i++) {
-+ kfree(urb_priv->intr_ep_pool[i]);
-+ }
-+ /*
-+ tc_dbg("Freed %d EPs from URB:0x%x EP pool\n",
-+ urb_priv->intr_ep_pool_length, (unsigned int)urb);
-+ */
-+ }
-+
-+ kfree(urb_priv);
-+ urb->hcpriv = NULL;
-+}
-+
-+static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) {
-+ struct crisv10_ep_priv *ep_priv;
-+
-+ ep_priv = kmalloc(sizeof *ep_priv, mem_flags);
-+ if (!ep_priv)
-+ return -ENOMEM;
-+ memset(ep_priv, 0, sizeof *ep_priv);
-+
-+ ep->hcpriv = ep_priv;
-+ return 0;
-+}
-+
-+static void ep_priv_free(struct usb_host_endpoint *ep) {
-+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
-+ ASSERT(ep_priv);
-+ kfree(ep_priv);
-+ ep->hcpriv = NULL;
-+}
-+
-+/* EPID handling functions, managing EP-list in Etrax through wrappers */
-+/* ------------------------------------------------------------------- */
-+
-+/* Sets up a new EPID for an endpoint or returns existing if found */
-+static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb,
-+ int mem_flags) {
-+ int epid;
-+ char devnum, endpoint, out_traffic, slow;
-+ int maxlen;
-+ __u32 epid_data;
-+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
-+
-+ DBFENTER;
-+
-+ /* Check if a valid epid already is setup for this endpoint */
-+ if(ep_priv != NULL) {
-+ return ep_priv->epid;
-+ }
-+
-+ /* We must find and initiate a new epid for this urb. */
-+ epid = tc_allocate_epid();
-+
-+ if (epid == -1) {
-+ /* Failed to allocate a new epid. */
-+ DBFEXIT;
-+ return epid;
-+ }
-+
-+ /* We now have a new epid to use. Claim it. */
-+ epid_state[epid].inuse = 1;
-+
-+ /* Init private data for new endpoint */
-+ if(ep_priv_create(ep, mem_flags) != 0) {
-+ return -ENOMEM;
-+ }
-+ ep_priv = ep->hcpriv;
-+ ep_priv->epid = epid;
-+
-+ devnum = usb_pipedevice(urb->pipe);
-+ endpoint = usb_pipeendpoint(urb->pipe);
-+ slow = (urb->dev->speed == USB_SPEED_LOW);
-+ maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe));
-+
-+ if (usb_pipetype(urb->pipe) == PIPE_CONTROL) {
-+ /* We want both IN and OUT control traffic to be put on the same
-+ EP/SB list. */
-+ out_traffic = 1;
-+ } else {
-+ out_traffic = usb_pipeout(urb->pipe);
-+ }
-+
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) |
-+ /* FIXME: Change any to the actual port? */
-+ IO_STATE(R_USB_EPT_DATA_ISO, port, any) |
-+ IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) |
-+ IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) |
-+ IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum);
-+ etrax_epid_iso_set(epid, epid_data);
-+ } else {
-+ epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) |
-+ IO_FIELD(R_USB_EPT_DATA, low_speed, slow) |
-+ /* FIXME: Change any to the actual port? */
-+ IO_STATE(R_USB_EPT_DATA, port, any) |
-+ IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) |
-+ IO_FIELD(R_USB_EPT_DATA, ep, endpoint) |
-+ IO_FIELD(R_USB_EPT_DATA, dev, devnum);
-+ etrax_epid_set(epid, epid_data);
-+ }
-+
-+ epid_state[epid].out_traffic = out_traffic;
-+ epid_state[epid].type = usb_pipetype(urb->pipe);
-+
-+ tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n",
-+ (unsigned int)ep, epid, devnum, endpoint, maxlen,
-+ str_type(urb->pipe), out_traffic ? "out" : "in",
-+ slow ? "low" : "full");
-+
-+ /* Enable Isoc eof interrupt if we set up the first Isoc epid */
-+ if(usb_pipeisoc(urb->pipe)) {
-+ isoc_epid_counter++;
-+ if(isoc_epid_counter == 1) {
-+ isoc_warn("Enabled Isoc eof interrupt\n");
-+ *R_USB_IRQ_MASK_SET |= IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set);
-+ }
-+ }
-+
-+ DBFEXIT;
-+ return epid;
-+}
-+
-+static void tc_free_epid(struct usb_host_endpoint *ep) {
-+ unsigned long flags;
-+ struct crisv10_ep_priv *ep_priv = ep->hcpriv;
-+ int epid;
-+ volatile int timeout = 10000;
-+
-+ DBFENTER;
-+
-+ if (ep_priv == NULL) {
-+ tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep);
-+ DBFEXIT;
-+ return;
-+ }
-+
-+ epid = ep_priv->epid;
-+
-+ /* Disable Isoc eof interrupt if we free the last Isoc epid */
-+ if(epid_isoc(epid)) {
-+ ASSERT(isoc_epid_counter > 0);
-+ isoc_epid_counter--;
-+ if(isoc_epid_counter == 0) {
-+ *R_USB_IRQ_MASK_SET &= ~IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set);
-+ isoc_warn("Disabled Isoc eof interrupt\n");
-+ }
-+ }
-+
-+ /* Take lock manualy instead of in epid_x_x wrappers,
-+ because we need to be polling here */
-+ spin_lock_irqsave(&etrax_epid_lock, flags);
-+
-+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid);
-+ nop();
-+ while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for epid:%d to drop hold\n", epid);
-+ }
-+ /* This will, among other things, set the valid field to 0. */
-+ *R_USB_EPT_DATA = 0;
-+ spin_unlock_irqrestore(&etrax_epid_lock, flags);
-+
-+ /* Free resource in software state info list */
-+ epid_state[epid].inuse = 0;
-+
-+ /* Free private endpoint data */
-+ ep_priv_free(ep);
-+
-+ DBFEXIT;
-+}
-+
-+static int tc_allocate_epid(void) {
-+ int i;
-+ DBFENTER;
-+ for (i = 0; i < NBR_OF_EPIDS; i++) {
-+ if (!epid_inuse(i)) {
-+ DBFEXIT;
-+ return i;
-+ }
-+ }
-+
-+ tc_warn("Found no free epids\n");
-+ DBFEXIT;
-+ return -1;
-+}
-+
-+
-+/* Wrappers around the list functions (include/linux/list.h). */
-+/* ---------------------------------------------------------- */
-+static inline int __urb_list_empty(int epid) {
-+ int retval;
-+ retval = list_empty(&urb_list[epid]);
-+ return retval;
-+}
-+
-+/* Returns first urb for this epid, or NULL if list is empty. */
-+static inline struct urb *urb_list_first(int epid) {
-+ unsigned long flags;
-+ struct urb *first_urb = 0;
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ if (!__urb_list_empty(epid)) {
-+ /* Get the first urb (i.e. head->next). */
-+ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list);
-+ first_urb = urb_entry->urb;
-+ }
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+ return first_urb;
-+}
-+
-+/* Adds an urb_entry last in the list for this epid. */
-+static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) {
-+ unsigned long flags;
-+ urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags);
-+ ASSERT(urb_entry);
-+
-+ urb_entry->urb = urb;
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ list_add_tail(&urb_entry->list, &urb_list[epid]);
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+}
-+
-+/* Search through the list for an element that contains this urb. (The list
-+ is expected to be short and the one we are about to delete will often be
-+ the first in the list.)
-+ Should be protected by spin_locks in calling function */
-+static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) {
-+ struct list_head *entry;
-+ struct list_head *tmp;
-+ urb_entry_t *urb_entry;
-+
-+ list_for_each_safe(entry, tmp, &urb_list[epid]) {
-+ urb_entry = list_entry(entry, urb_entry_t, list);
-+ ASSERT(urb_entry);
-+ ASSERT(urb_entry->urb);
-+
-+ if (urb_entry->urb == urb) {
-+ return urb_entry;
-+ }
-+ }
-+ return 0;
-+}
-+
-+/* Same function as above but for global use. Protects list by spinlock */
-+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) {
-+ unsigned long flags;
-+ urb_entry_t *urb_entry;
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ urb_entry = __urb_list_entry(urb, epid);
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+ return (urb_entry);
-+}
-+
-+/* Delete an urb from the list. */
-+static inline void urb_list_del(struct urb *urb, int epid) {
-+ unsigned long flags;
-+ urb_entry_t *urb_entry;
-+
-+ /* Delete entry and free. */
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ urb_entry = __urb_list_entry(urb, epid);
-+ ASSERT(urb_entry);
-+
-+ list_del(&urb_entry->list);
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+ kfree(urb_entry);
-+}
-+
-+/* Move an urb to the end of the list. */
-+static inline void urb_list_move_last(struct urb *urb, int epid) {
-+ unsigned long flags;
-+ urb_entry_t *urb_entry;
-+
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ urb_entry = __urb_list_entry(urb, epid);
-+ ASSERT(urb_entry);
-+
-+ list_del(&urb_entry->list);
-+ list_add_tail(&urb_entry->list, &urb_list[epid]);
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+}
-+
-+/* Get the next urb in the list. */
-+static inline struct urb *urb_list_next(struct urb *urb, int epid) {
-+ unsigned long flags;
-+ urb_entry_t *urb_entry;
-+
-+ spin_lock_irqsave(&urb_list_lock, flags);
-+ urb_entry = __urb_list_entry(urb, epid);
-+ ASSERT(urb_entry);
-+
-+ if (urb_entry->list.next != &urb_list[epid]) {
-+ struct list_head *elem = urb_entry->list.next;
-+ urb_entry = list_entry(elem, urb_entry_t, list);
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+ return urb_entry->urb;
-+ } else {
-+ spin_unlock_irqrestore(&urb_list_lock, flags);
-+ return NULL;
-+ }
-+}
-+
-+struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc,
-+ int mem_flags) {
-+ struct USB_EP_Desc *ep_desc;
-+ ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags);
-+ if(ep_desc == NULL)
-+ return NULL;
-+ memset(ep_desc, 0, sizeof(struct USB_EP_Desc));
-+
-+ ep_desc->hw_len = 0;
-+ ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) |
-+ IO_STATE(USB_EP_command, enable, yes));
-+ if(sb_desc == NULL) {
-+ ep_desc->sub = 0;
-+ } else {
-+ ep_desc->sub = virt_to_phys(sb_desc);
-+ }
-+ return ep_desc;
-+}
-+
-+#define TT_ZOUT 0
-+#define TT_IN 1
-+#define TT_OUT 2
-+#define TT_SETUP 3
-+
-+#define CMD_EOL IO_STATE(USB_SB_command, eol, yes)
-+#define CMD_INTR IO_STATE(USB_SB_command, intr, yes)
-+#define CMD_FULL IO_STATE(USB_SB_command, full, yes)
-+
-+/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT
-+ SBs. Also used by create_sb_in() to avoid same allocation procedure at two
-+ places */
-+struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data,
-+ int datalen, int mem_flags) {
-+ struct USB_SB_Desc *sb_desc;
-+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags);
-+ if(sb_desc == NULL)
-+ return NULL;
-+ memset(sb_desc, 0, sizeof(struct USB_SB_Desc));
-+
-+ sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) |
-+ IO_STATE(USB_SB_command, eot, yes);
-+
-+ sb_desc->sw_len = datalen;
-+ if(data != NULL) {
-+ sb_desc->buf = virt_to_phys(data);
-+ } else {
-+ sb_desc->buf = 0;
-+ }
-+ if(sb_prev != NULL) {
-+ sb_prev->next = virt_to_phys(sb_desc);
-+ }
-+ return sb_desc;
-+}
-+
-+/* Creates a copy of an existing SB by allocation space for it and copy
-+ settings */
-+struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) {
-+ struct USB_SB_Desc *sb_desc;
-+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags);
-+ if(sb_desc == NULL)
-+ return NULL;
-+
-+ memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc));
-+ return sb_desc;
-+}
-+
-+/* A specific create_sb function for creation of in SBs. This is due to
-+ that datalen in In SBs shows how many packets we are expecting. It also
-+ sets up the rem field to show if how many bytes we expect in last packet
-+ if it's not a full one */
-+struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen,
-+ int maxlen, int mem_flags) {
-+ struct USB_SB_Desc *sb_desc;
-+ sb_desc = create_sb(sb_prev, TT_IN, NULL,
-+ datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags);
-+ if(sb_desc == NULL)
-+ return NULL;
-+ sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen);
-+ return sb_desc;
-+}
-+
-+void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) {
-+ sb_desc->command |= flags;
-+}
-+
-+int create_sb_for_urb(struct urb *urb, int mem_flags) {
-+ int is_out = !usb_pipein(urb->pipe);
-+ int type = usb_pipetype(urb->pipe);
-+ int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out);
-+ int buf_len = urb->transfer_buffer_length;
-+ void *buf = buf_len > 0 ? urb->transfer_buffer : NULL;
-+ struct USB_SB_Desc *sb_desc = NULL;
-+
-+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv != NULL);
-+
-+ switch(type) {
-+ case PIPE_CONTROL:
-+ /* Setup stage */
-+ sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+
-+ /* Attach first SB to URB */
-+ urb_priv->first_sb = sb_desc;
-+
-+ if (is_out) { /* Out Control URB */
-+ /* If this Control OUT transfer has an optional data stage we add
-+ an OUT token before the mandatory IN (status) token */
-+ if ((buf_len > 0) && buf) {
-+ sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+ }
-+
-+ /* Status stage */
-+ /* The data length has to be exactly 1. This is due to a requirement
-+ of the USB specification that a host must be prepared to receive
-+ data in the status phase */
-+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ } else { /* In control URB */
-+ /* Data stage */
-+ sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+
-+ /* Status stage */
-+ /* Read comment at zout_buffer declaration for an explanation to this. */
-+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ /* Set descriptor interrupt flag for in URBs so we can finish URB after
-+ zout-packet has been sent */
-+ set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL);
-+ }
-+ /* Set end-of-list flag in last SB */
-+ set_sb_cmds(sb_desc, CMD_EOL);
-+ /* Attach last SB to URB */
-+ urb_priv->last_sb = sb_desc;
-+ break;
-+
-+ case PIPE_BULK:
-+ if (is_out) { /* Out Bulk URB */
-+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ /* The full field is set to yes, even if we don't actually check that
-+ this is a full-length transfer (i.e., that transfer_buffer_length %
-+ maxlen = 0).
-+ Setting full prevents the USB controller from sending an empty packet
-+ in that case. However, if URB_ZERO_PACKET was set we want that. */
-+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+ }
-+ } else { /* In Bulk URB */
-+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ }
-+ /* Set end-of-list flag for last SB */
-+ set_sb_cmds(sb_desc, CMD_EOL);
-+
-+ /* Attach SB to URB */
-+ urb_priv->first_sb = sb_desc;
-+ urb_priv->last_sb = sb_desc;
-+ break;
-+
-+ case PIPE_INTERRUPT:
-+ if(is_out) { /* Out Intr URB */
-+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+
-+ /* The full field is set to yes, even if we don't actually check that
-+ this is a full-length transfer (i.e., that transfer_buffer_length %
-+ maxlen = 0).
-+ Setting full prevents the USB controller from sending an empty packet
-+ in that case. However, if URB_ZERO_PACKET was set we want that. */
-+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) {
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+ }
-+ /* Only generate TX interrupt if it's a Out URB*/
-+ set_sb_cmds(sb_desc, CMD_INTR);
-+
-+ } else { /* In Intr URB */
-+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ }
-+ /* Set end-of-list flag for last SB */
-+ set_sb_cmds(sb_desc, CMD_EOL);
-+
-+ /* Attach SB to URB */
-+ urb_priv->first_sb = sb_desc;
-+ urb_priv->last_sb = sb_desc;
-+
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ if(is_out) { /* Out Isoc URB */
-+ int i;
-+ if(urb->number_of_packets == 0) {
-+ tc_err("Can't create SBs for Isoc URB with zero packets\n");
-+ return -EPIPE;
-+ }
-+ /* Create one SB descriptor for each packet and link them together. */
-+ for(i = 0; i < urb->number_of_packets; i++) {
-+ if (urb->iso_frame_desc[i].length > 0) {
-+
-+ sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer +
-+ urb->iso_frame_desc[i].offset,
-+ urb->iso_frame_desc[i].length, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+
-+ /* Check if it's a full length packet */
-+ if (urb->iso_frame_desc[i].length ==
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) {
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+ }
-+
-+ } else { /* zero length packet */
-+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ set_sb_cmds(sb_desc, CMD_FULL);
-+ }
-+ /* Attach first SB descriptor to URB */
-+ if (i == 0) {
-+ urb_priv->first_sb = sb_desc;
-+ }
-+ }
-+ /* Set interrupt and end-of-list flags in last SB */
-+ set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL);
-+ /* Attach last SB descriptor to URB */
-+ urb_priv->last_sb = sb_desc;
-+ tc_dbg("Created %d out SBs for Isoc URB:0x%x\n",
-+ urb->number_of_packets, (unsigned int)urb);
-+ } else { /* In Isoc URB */
-+ /* Actual number of packets is not relevant for periodic in traffic as
-+ long as it is more than zero. Set to 1 always. */
-+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags);
-+ if(sb_desc == NULL)
-+ return -ENOMEM;
-+ /* Set end-of-list flags for SB */
-+ set_sb_cmds(sb_desc, CMD_EOL);
-+
-+ /* Attach SB to URB */
-+ urb_priv->first_sb = sb_desc;
-+ urb_priv->last_sb = sb_desc;
-+ }
-+ break;
-+ default:
-+ tc_err("Unknown pipe-type\n");
-+ return -EPIPE;
-+ break;
-+ }
-+ return 0;
-+}
-+
-+int init_intr_urb(struct urb *urb, int mem_flags) {
-+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ struct USB_EP_Desc* ep_desc;
-+ int interval;
-+ int i;
-+ int ep_count;
-+
-+ ASSERT(urb_priv != NULL);
-+ ASSERT(usb_pipeint(urb->pipe));
-+ /* We can't support interval longer than amount of eof descriptors in
-+ TxIntrEPList */
-+ if(urb->interval > MAX_INTR_INTERVAL) {
-+ tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval,
-+ MAX_INTR_INTERVAL);
-+ return -EINVAL;
-+ }
-+
-+ /* We assume that the SB descriptors already have been setup */
-+ ASSERT(urb_priv->first_sb != NULL);
-+
-+ /* Round of the interval to 2^n, it is obvious that this code favours
-+ smaller numbers, but that is actually a good thing */
-+ /* FIXME: The "rounding error" for larger intervals will be quite
-+ large. For in traffic this shouldn't be a problem since it will only
-+ mean that we "poll" more often. */
-+ interval = urb->interval;
-+ for (i = 0; interval; i++) {
-+ interval = interval >> 1;
-+ }
-+ urb_priv->interval = 1 << (i - 1);
-+
-+ /* We can only have max interval for Out Interrupt due to that we can only
-+ handle one linked in EP for a certain epid in the Intr descr array at the
-+ time. The USB Controller in the Etrax 100LX continues to process Intr EPs
-+ so we have no way of knowing which one that caused the actual transfer if
-+ we have several linked in. */
-+ if(usb_pipeout(urb->pipe)) {
-+ urb_priv->interval = MAX_INTR_INTERVAL;
-+ }
-+
-+ /* Calculate amount of EPs needed */
-+ ep_count = MAX_INTR_INTERVAL / urb_priv->interval;
-+
-+ for(i = 0; i < ep_count; i++) {
-+ ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags);
-+ if(ep_desc == NULL) {
-+ /* Free any descriptors that we may have allocated before failure */
-+ while(i > 0) {
-+ i--;
-+ kfree(urb_priv->intr_ep_pool[i]);
-+ }
-+ return -ENOMEM;
-+ }
-+ urb_priv->intr_ep_pool[i] = ep_desc;
-+ }
-+ urb_priv->intr_ep_pool_length = ep_count;
-+ return 0;
-+}
-+
-+/* DMA RX/TX functions */
-+/* ----------------------- */
-+
-+static void tc_dma_init_rx_list(void) {
-+ int i;
-+
-+ /* Setup descriptor list except last one */
-+ for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) {
-+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
-+ RxDescList[i].command = 0;
-+ RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]);
-+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
-+ RxDescList[i].hw_len = 0;
-+ RxDescList[i].status = 0;
-+
-+ /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as
-+ USB_IN_Desc for the relevant fields.) */
-+ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]);
-+
-+ }
-+ /* Special handling of last descriptor */
-+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE;
-+ RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes);
-+ RxDescList[i].next = virt_to_phys(&RxDescList[0]);
-+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE));
-+ RxDescList[i].hw_len = 0;
-+ RxDescList[i].status = 0;
-+
-+ /* Setup list pointers that show progress in list */
-+ myNextRxDesc = &RxDescList[0];
-+ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
-+
-+ flush_etrax_cache();
-+ /* Point DMA to first descriptor in list and start it */
-+ *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc);
-+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start);
-+}
-+
-+
-+static void tc_dma_init_tx_bulk_list(void) {
-+ int i;
-+ volatile struct USB_EP_Desc *epDescr;
-+
-+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
-+ epDescr = &(TxBulkEPList[i]);
-+ CHECK_ALIGN(epDescr);
-+ epDescr->hw_len = 0;
-+ epDescr->command = IO_FIELD(USB_EP_command, epid, i);
-+ epDescr->sub = 0;
-+ epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]);
-+
-+ /* Initiate two EPs, disabled and with the eol flag set. No need for any
-+ preserved epid. */
-+
-+ /* The first one has the intr flag set so we get an interrupt when the DMA
-+ channel is about to become disabled. */
-+ CHECK_ALIGN(&TxBulkDummyEPList[i][0]);
-+ TxBulkDummyEPList[i][0].hw_len = 0;
-+ TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
-+ IO_STATE(USB_EP_command, eol, yes) |
-+ IO_STATE(USB_EP_command, intr, yes));
-+ TxBulkDummyEPList[i][0].sub = 0;
-+ TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]);
-+
-+ /* The second one. */
-+ CHECK_ALIGN(&TxBulkDummyEPList[i][1]);
-+ TxBulkDummyEPList[i][1].hw_len = 0;
-+ TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) |
-+ IO_STATE(USB_EP_command, eol, yes));
-+ TxBulkDummyEPList[i][1].sub = 0;
-+ /* The last dummy's next pointer is the same as the current EP's next pointer. */
-+ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]);
-+ }
-+
-+ /* Special handling of last descr in list, make list circular */
-+ epDescr = &TxBulkEPList[i];
-+ CHECK_ALIGN(epDescr);
-+ epDescr->hw_len = 0;
-+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) |
-+ IO_FIELD(USB_EP_command, epid, i);
-+ epDescr->sub = 0;
-+ epDescr->next = virt_to_phys(&TxBulkEPList[0]);
-+
-+ /* Init DMA sub-channel pointers to last item in each list */
-+ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]);
-+ /* No point in starting the bulk channel yet.
-+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
-+}
-+
-+static void tc_dma_init_tx_ctrl_list(void) {
-+ int i;
-+ volatile struct USB_EP_Desc *epDescr;
-+
-+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
-+ epDescr = &(TxCtrlEPList[i]);
-+ CHECK_ALIGN(epDescr);
-+ epDescr->hw_len = 0;
-+ epDescr->command = IO_FIELD(USB_EP_command, epid, i);
-+ epDescr->sub = 0;
-+ epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]);
-+ }
-+ /* Special handling of last descr in list, make list circular */
-+ epDescr = &TxCtrlEPList[i];
-+ CHECK_ALIGN(epDescr);
-+ epDescr->hw_len = 0;
-+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) |
-+ IO_FIELD(USB_EP_command, epid, i);
-+ epDescr->sub = 0;
-+ epDescr->next = virt_to_phys(&TxCtrlEPList[0]);
-+
-+ /* Init DMA sub-channel pointers to last item in each list */
-+ *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]);
-+ /* No point in starting the ctrl channel yet.
-+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */
-+}
-+
-+
-+static void tc_dma_init_tx_intr_list(void) {
-+ int i;
-+
-+ TxIntrSB_zout.sw_len = 1;
-+ TxIntrSB_zout.next = 0;
-+ TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]);
-+ TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
-+ IO_STATE(USB_SB_command, tt, zout) |
-+ IO_STATE(USB_SB_command, full, yes) |
-+ IO_STATE(USB_SB_command, eot, yes) |
-+ IO_STATE(USB_SB_command, eol, yes));
-+
-+ for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) {
-+ CHECK_ALIGN(&TxIntrEPList[i]);
-+ TxIntrEPList[i].hw_len = 0;
-+ TxIntrEPList[i].command =
-+ (IO_STATE(USB_EP_command, eof, yes) |
-+ IO_STATE(USB_EP_command, enable, yes) |
-+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
-+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
-+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]);
-+ }
-+
-+ /* Special handling of last descr in list, make list circular */
-+ CHECK_ALIGN(&TxIntrEPList[i]);
-+ TxIntrEPList[i].hw_len = 0;
-+ TxIntrEPList[i].command =
-+ (IO_STATE(USB_EP_command, eof, yes) |
-+ IO_STATE(USB_EP_command, eol, yes) |
-+ IO_STATE(USB_EP_command, enable, yes) |
-+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
-+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout);
-+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]);
-+
-+ intr_dbg("Initiated Intr EP descriptor list\n");
-+
-+
-+ /* Connect DMA 8 sub-channel 2 to first in list */
-+ *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]);
-+}
-+
-+static void tc_dma_init_tx_isoc_list(void) {
-+ int i;
-+
-+ DBFENTER;
-+
-+ /* Read comment at zout_buffer declaration for an explanation to this. */
-+ TxIsocSB_zout.sw_len = 1;
-+ TxIsocSB_zout.next = 0;
-+ TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]);
-+ TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) |
-+ IO_STATE(USB_SB_command, tt, zout) |
-+ IO_STATE(USB_SB_command, full, yes) |
-+ IO_STATE(USB_SB_command, eot, yes) |
-+ IO_STATE(USB_SB_command, eol, yes));
-+
-+ /* The last isochronous EP descriptor is a dummy. */
-+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) {
-+ CHECK_ALIGN(&TxIsocEPList[i]);
-+ TxIsocEPList[i].hw_len = 0;
-+ TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i);
-+ TxIsocEPList[i].sub = 0;
-+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]);
-+ }
-+
-+ CHECK_ALIGN(&TxIsocEPList[i]);
-+ TxIsocEPList[i].hw_len = 0;
-+
-+ /* Must enable the last EP descr to get eof interrupt. */
-+ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) |
-+ IO_STATE(USB_EP_command, eof, yes) |
-+ IO_STATE(USB_EP_command, eol, yes) |
-+ IO_FIELD(USB_EP_command, epid, INVALID_EPID));
-+ TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout);
-+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]);
-+
-+ *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]);
-+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
-+}
-+
-+static int tc_dma_init(struct usb_hcd *hcd) {
-+ tc_dma_init_rx_list();
-+ tc_dma_init_tx_bulk_list();
-+ tc_dma_init_tx_ctrl_list();
-+ tc_dma_init_tx_intr_list();
-+ tc_dma_init_tx_isoc_list();
-+
-+ if (cris_request_dma(USB_TX_DMA_NBR,
-+ "ETRAX 100LX built-in USB (Tx)",
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_usb)) {
-+ err("Could not allocate DMA ch 8 for USB");
-+ return -EBUSY;
-+ }
-+
-+ if (cris_request_dma(USB_RX_DMA_NBR,
-+ "ETRAX 100LX built-in USB (Rx)",
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_usb)) {
-+ err("Could not allocate DMA ch 9 for USB");
-+ return -EBUSY;
-+ }
-+
-+ *R_IRQ_MASK2_SET =
-+ /* Note that these interrupts are not used. */
-+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) |
-+ /* Sub channel 1 (ctrl) descr. interrupts are used. */
-+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) |
-+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) |
-+ /* Sub channel 3 (isoc) descr. interrupts are used. */
-+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set);
-+
-+ /* Note that the dma9_descr interrupt is not used. */
-+ *R_IRQ_MASK2_SET =
-+ IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) |
-+ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set);
-+
-+ if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0,
-+ "ETRAX 100LX built-in USB (Rx)", hcd)) {
-+ err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ);
-+ return -EBUSY;
-+ }
-+
-+ if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0,
-+ "ETRAX 100LX built-in USB (Tx)", hcd)) {
-+ err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ);
-+ return -EBUSY;
-+ }
-+
-+ return 0;
-+}
-+
-+static void tc_dma_destroy(void) {
-+ free_irq(ETRAX_USB_RX_IRQ, NULL);
-+ free_irq(ETRAX_USB_TX_IRQ, NULL);
-+
-+ cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)");
-+ cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)");
-+
-+}
-+
-+static void tc_dma_link_intr_urb(struct urb *urb);
-+
-+/* Handle processing of Bulk, Ctrl and Intr queues */
-+static void tc_dma_process_queue(int epid) {
-+ struct urb *urb;
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ unsigned long flags;
-+ char toggle;
-+
-+ if(epid_state[epid].disabled) {
-+ /* Don't process any URBs on a disabled endpoint */
-+ return;
-+ }
-+
-+ /* Do not disturb us while fiddling with EPs and epids */
-+ local_irq_save(flags);
-+
-+ /* For bulk, Ctrl and Intr can we only have one URB active at a time for
-+ a specific EP. */
-+ if(activeUrbList[epid] != NULL) {
-+ /* An URB is already active on EP, skip checking queue */
-+ local_irq_restore(flags);
-+ return;
-+ }
-+
-+ urb = urb_list_first(epid);
-+ if(urb == NULL) {
-+ /* No URB waiting in EP queue. Nothing do to */
-+ local_irq_restore(flags);
-+ return;
-+ }
-+
-+ urb_priv = urb->hcpriv;
-+ ASSERT(urb_priv != NULL);
-+ ASSERT(urb_priv->urb_state == NOT_STARTED);
-+ ASSERT(!usb_pipeisoc(urb->pipe));
-+
-+ /* Remove this URB from the queue and move it to active */
-+ activeUrbList[epid] = urb;
-+ urb_list_del(urb, epid);
-+
-+ urb_priv->urb_state = STARTED;
-+
-+ /* Reset error counters (regardless of which direction this traffic is). */
-+ etrax_epid_clear_error(epid);
-+
-+ /* Special handling of Intr EP lists */
-+ if(usb_pipeint(urb->pipe)) {
-+ tc_dma_link_intr_urb(urb);
-+ local_irq_restore(flags);
-+ return;
-+ }
-+
-+ /* Software must preset the toggle bits for Bulk and Ctrl */
-+ if(usb_pipecontrol(urb->pipe)) {
-+ /* Toggle bits are initialized only during setup transaction in a
-+ CTRL transfer */
-+ etrax_epid_set_toggle(epid, 0, 0);
-+ etrax_epid_set_toggle(epid, 1, 0);
-+ } else {
-+ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
-+ usb_pipeout(urb->pipe));
-+ etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle);
-+ }
-+
-+ tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n",
-+ (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid,
-+ sblist_to_str(urb_priv->first_sb));
-+
-+ /* We start the DMA sub channel without checking if it's running or not,
-+ because:
-+ 1) If it's already running, issuing the start command is a nop.
-+ 2) We avoid a test-and-set race condition. */
-+ switch(usb_pipetype(urb->pipe)) {
-+ case PIPE_BULK:
-+ /* Assert that the EP descriptor is disabled. */
-+ ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-+
-+ /* Set up and enable the EP descriptor. */
-+ TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-+ TxBulkEPList[epid].hw_len = 0;
-+ TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-+
-+ /* Check if the dummy list is already with us (if several urbs were queued). */
-+ if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) {
-+ tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d",
-+ (unsigned long)urb, epid);
-+
-+ /* We don't need to check if the DMA is at this EP or not before changing the
-+ next pointer, since we will do it in one 32-bit write (EP descriptors are
-+ 32-bit aligned). */
-+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]);
-+ }
-+
-+ restart_dma8_sub0();
-+
-+ /* Update/restart the bulk start timer since we just started the channel.*/
-+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL);
-+ /* Update/restart the bulk eot timer since we just inserted traffic. */
-+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-+ break;
-+ case PIPE_CONTROL:
-+ /* Assert that the EP descriptor is disabled. */
-+ ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)));
-+
-+ /* Set up and enable the EP descriptor. */
-+ TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-+ TxCtrlEPList[epid].hw_len = 0;
-+ TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-+
-+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start);
-+ break;
-+ }
-+ local_irq_restore(flags);
-+}
-+
-+static void tc_dma_link_intr_urb(struct urb *urb) {
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ volatile struct USB_EP_Desc *tmp_ep;
-+ struct USB_EP_Desc *ep_desc;
-+ int i = 0, epid;
-+ int pool_idx = 0;
-+
-+ ASSERT(urb_priv != NULL);
-+ epid = urb_priv->epid;
-+ ASSERT(urb_priv->interval > 0);
-+ ASSERT(urb_priv->intr_ep_pool_length > 0);
-+
-+ tmp_ep = &TxIntrEPList[0];
-+
-+ /* Only insert one EP descriptor in list for Out Intr URBs.
-+ We can only handle Out Intr with interval of 128ms because
-+ it's not possible to insert several Out Intr EPs because they
-+ are not consumed by the DMA. */
-+ if(usb_pipeout(urb->pipe)) {
-+ ep_desc = urb_priv->intr_ep_pool[0];
-+ ASSERT(ep_desc);
-+ ep_desc->next = tmp_ep->next;
-+ tmp_ep->next = virt_to_phys(ep_desc);
-+ i++;
-+ } else {
-+ /* Loop through Intr EP descriptor list and insert EP for URB at
-+ specified interval */
-+ do {
-+ /* Each EP descriptor with eof flag sat signals a new frame */
-+ if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) {
-+ /* Insert a EP from URBs EP pool at correct interval */
-+ if ((i % urb_priv->interval) == 0) {
-+ ep_desc = urb_priv->intr_ep_pool[pool_idx];
-+ ASSERT(ep_desc);
-+ ep_desc->next = tmp_ep->next;
-+ tmp_ep->next = virt_to_phys(ep_desc);
-+ pool_idx++;
-+ ASSERT(pool_idx <= urb_priv->intr_ep_pool_length);
-+ }
-+ i++;
-+ }
-+ tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next);
-+ } while(tmp_ep != &TxIntrEPList[0]);
-+ }
-+
-+ intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid,
-+ sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx);
-+
-+ /* We start the DMA sub channel without checking if it's running or not,
-+ because:
-+ 1) If it's already running, issuing the start command is a nop.
-+ 2) We avoid a test-and-set race condition. */
-+ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start);
-+}
-+
-+static void tc_dma_process_isoc_urb(struct urb *urb) {
-+ unsigned long flags;
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ int epid;
-+
-+ /* Do not disturb us while fiddling with EPs and epids */
-+ local_irq_save(flags);
-+
-+ ASSERT(urb_priv);
-+ ASSERT(urb_priv->first_sb);
-+ epid = urb_priv->epid;
-+
-+ if(activeUrbList[epid] == NULL) {
-+ /* EP is idle, so make this URB active */
-+ activeUrbList[epid] = urb;
-+ urb_list_del(urb, epid);
-+ ASSERT(TxIsocEPList[epid].sub == 0);
-+ ASSERT(!(TxIsocEPList[epid].command &
-+ IO_STATE(USB_EP_command, enable, yes)));
-+
-+ /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/
-+ if(usb_pipein(urb->pipe)) {
-+ /* Each EP for In Isoc will have only one SB descriptor, setup when
-+ submitting the first active urb. We do it here by copying from URBs
-+ pre-allocated SB. */
-+ memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb,
-+ sizeof(TxIsocSBList[epid]));
-+ TxIsocEPList[epid].hw_len = 0;
-+ TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid]));
-+ } else {
-+ /* For Out Isoc we attach the pre-allocated list of SBs for the URB */
-+ TxIsocEPList[epid].hw_len = 0;
-+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-+
-+ isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x"
-+ " last_sb::0x%x\n",
-+ (unsigned int)urb, urb_priv->urb_num, epid,
-+ (unsigned int)(urb_priv->first_sb),
-+ (unsigned int)(urb_priv->last_sb));
-+ }
-+
-+ if (urb->transfer_flags & URB_ISO_ASAP) {
-+ /* The isoc transfer should be started as soon as possible. The
-+ start_frame field is a return value if URB_ISO_ASAP was set. Comparing
-+ R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN
-+ token is sent 2 frames later. I'm not sure how this affects usage of
-+ the start_frame field by the device driver, or how it affects things
-+ when USB_ISO_ASAP is not set, so therefore there's no compensation for
-+ the 2 frame "lag" here. */
-+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
-+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes);
-+ urb_priv->urb_state = STARTED;
-+ isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n",
-+ urb->start_frame);
-+ } else {
-+ /* Not started yet. */
-+ urb_priv->urb_state = NOT_STARTED;
-+ isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n",
-+ (unsigned int)urb);
-+ }
-+
-+ } else {
-+ /* An URB is already active on the EP. Leave URB in queue and let
-+ finish_isoc_urb process it after current active URB */
-+ ASSERT(TxIsocEPList[epid].sub != 0);
-+
-+ if(usb_pipein(urb->pipe)) {
-+ /* Because there already is a active In URB on this epid we do nothing
-+ and the finish_isoc_urb() function will handle switching to next URB*/
-+
-+ } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */
-+ struct USB_SB_Desc *temp_sb_desc;
-+
-+ /* Set state STARTED to all Out Isoc URBs added to SB list because we
-+ don't know how many of them that are finished before descr interrupt*/
-+ urb_priv->urb_state = STARTED;
-+
-+ /* Find end of current SB list by looking for SB with eol flag sat */
-+ temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
-+ while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) !=
-+ IO_STATE(USB_SB_command, eol, yes)) {
-+ ASSERT(temp_sb_desc->next);
-+ temp_sb_desc = phys_to_virt(temp_sb_desc->next);
-+ }
-+
-+ isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d"
-+ " sub:0x%x eol:0x%x\n",
-+ (unsigned int)urb, urb_priv->urb_num,
-+ (unsigned int)(urb_priv->first_sb),
-+ (unsigned int)(urb_priv->last_sb), epid,
-+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
-+ (unsigned int)temp_sb_desc);
-+
-+ /* Next pointer must be set before eol is removed. */
-+ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb);
-+ /* Clear the previous end of list flag since there is a new in the
-+ added SB descriptor list. */
-+ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol);
-+
-+ if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
-+ __u32 epid_data;
-+ /* 8.8.5 in Designer's Reference says we should check for and correct
-+ any errors in the EP here. That should not be necessary if
-+ epid_attn is handled correctly, so we assume all is ok. */
-+ epid_data = etrax_epid_iso_get(epid);
-+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) !=
-+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-+ isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending"
-+ " URB:0x%x[%d]\n",
-+ IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid,
-+ (unsigned int)urb, urb_priv->urb_num);
-+ }
-+
-+ /* The SB list was exhausted. */
-+ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) {
-+ /* The new sublist did not get processed before the EP was
-+ disabled. Setup the EP again. */
-+
-+ if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) {
-+ isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted"
-+ ", restarting from this URBs SB:0x%x\n",
-+ epid, (unsigned int)temp_sb_desc,
-+ (unsigned int)(urb_priv->first_sb));
-+ TxIsocEPList[epid].hw_len = 0;
-+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb);
-+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff);
-+ /* Enable the EP again so data gets processed this time */
-+ TxIsocEPList[epid].command |=
-+ IO_STATE(USB_EP_command, enable, yes);
-+
-+ } else {
-+ /* The EP has been disabled but not at end this URB (god knows
-+ where). This should generate an epid_attn so we should not be
-+ here */
-+ isoc_warn("EP was disabled on sb:0x%x before SB list for"
-+ " URB:0x%x[%d] got processed\n",
-+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
-+ (unsigned int)urb, urb_priv->urb_num);
-+ }
-+ } else {
-+ /* This might happend if we are slow on this function and isn't
-+ an error. */
-+ isoc_dbg("EP was disabled and finished with SBs from appended"
-+ " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num);
-+ }
-+ }
-+ }
-+ }
-+
-+ /* Start the DMA sub channel */
-+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start);
-+
-+ local_irq_restore(flags);
-+}
-+
-+static void tc_dma_unlink_intr_urb(struct urb *urb) {
-+ struct crisv10_urb_priv *urb_priv = urb->hcpriv;
-+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */
-+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
-+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
-+ volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from
-+ the list. */
-+ int count = 0;
-+ volatile int timeout = 10000;
-+ int epid;
-+
-+ /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the
-+ List". */
-+ ASSERT(urb_priv);
-+ ASSERT(urb_priv->intr_ep_pool_length > 0);
-+ epid = urb_priv->epid;
-+
-+ /* First disable all Intr EPs belonging to epid for this URB */
-+ first_ep = &TxIntrEPList[0];
-+ curr_ep = first_ep;
-+ do {
-+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
-+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
-+ /* Disable EP */
-+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
-+ }
-+ curr_ep = phys_to_virt(curr_ep->next);
-+ } while (curr_ep != first_ep);
-+
-+
-+ /* Now unlink all EPs belonging to this epid from Descr list */
-+ first_ep = &TxIntrEPList[0];
-+ curr_ep = first_ep;
-+ do {
-+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
-+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) {
-+ /* This is the one we should unlink. */
-+ unlink_ep = next_ep;
-+
-+ /* Actually unlink the EP from the DMA list. */
-+ curr_ep->next = unlink_ep->next;
-+
-+ /* Wait until the DMA is no longer at this descriptor. */
-+ while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) &&
-+ (timeout-- > 0));
-+ if(timeout == 0) {
-+ warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n");
-+ }
-+
-+ count++;
-+ }
-+ curr_ep = phys_to_virt(curr_ep->next);
-+ } while (curr_ep != first_ep);
-+
-+ if(count != urb_priv->intr_ep_pool_length) {
-+ intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count,
-+ urb_priv->intr_ep_pool_length, (unsigned int)urb,
-+ urb_priv->urb_num);
-+ } else {
-+ intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count,
-+ urb_priv->intr_ep_pool_length, (unsigned int)urb);
-+ }
-+}
-+
-+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd,
-+ int timer) {
-+ unsigned long flags;
-+ int epid;
-+ struct urb *urb;
-+ struct crisv10_urb_priv * urb_priv;
-+ __u32 epid_data;
-+
-+ /* Protect TxEPList */
-+ local_irq_save(flags);
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ /* A finished EP descriptor is disabled and has a valid sub pointer */
-+ if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
-+ (TxBulkEPList[epid].sub != 0)) {
-+
-+ /* Get the active URB for this epid */
-+ urb = activeUrbList[epid];
-+ /* Sanity checks */
-+ ASSERT(urb);
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ /* Only handle finished out Bulk EPs here,
-+ and let RX interrupt take care of the rest */
-+ if(!epid_out_traffic(epid)) {
-+ continue;
-+ }
-+
-+ if(timer) {
-+ tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n",
-+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb,
-+ urb_priv->urb_num);
-+ } else {
-+ tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n",
-+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb,
-+ urb_priv->urb_num);
-+ }
-+
-+ if(urb_priv->urb_state == UNLINK) {
-+ /* This Bulk URB is requested to be unlinked, that means that the EP
-+ has been disabled and we might not have sent all data */
-+ tc_finish_urb(hcd, urb, urb->status);
-+ continue;
-+ }
-+
-+ ASSERT(urb_priv->urb_state == STARTED);
-+ if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) {
-+ tc_err("Endpoint got disabled before reaching last sb\n");
-+ }
-+
-+ epid_data = etrax_epid_get(epid);
-+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) ==
-+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-+ /* This means that the endpoint has no error, is disabled
-+ and had inserted traffic, i.e. transfer successfully completed. */
-+ tc_finish_urb(hcd, urb, 0);
-+ } else {
-+ /* Shouldn't happen. We expect errors to be caught by epid
-+ attention. */
-+ tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n",
-+ epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data));
-+ }
-+ } else {
-+ tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid);
-+ }
-+ }
-+
-+ local_irq_restore(flags);
-+}
-+
-+static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) {
-+ unsigned long flags;
-+ int epid;
-+ struct urb *urb;
-+ struct crisv10_urb_priv * urb_priv;
-+ __u32 epid_data;
-+
-+ /* Protect TxEPList */
-+ local_irq_save(flags);
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ if(epid == DUMMY_EPID)
-+ continue;
-+
-+ /* A finished EP descriptor is disabled and has a valid sub pointer */
-+ if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) &&
-+ (TxCtrlEPList[epid].sub != 0)) {
-+
-+ /* Get the active URB for this epid */
-+ urb = activeUrbList[epid];
-+
-+ if(urb == NULL) {
-+ tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid);
-+ continue;
-+ }
-+
-+ /* Sanity checks */
-+ ASSERT(usb_pipein(urb->pipe));
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+ if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) {
-+ tc_err("Endpoint got disabled before reaching last sb\n");
-+ }
-+
-+ epid_data = etrax_epid_get(epid);
-+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) ==
-+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) {
-+ /* This means that the endpoint has no error, is disabled
-+ and had inserted traffic, i.e. transfer successfully completed. */
-+
-+ /* Check if RX-interrupt for In Ctrl has been processed before
-+ finishing the URB */
-+ if(urb_priv->ctrl_rx_done) {
-+ tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n",
-+ (unsigned int)urb, urb_priv->urb_num);
-+ tc_finish_urb(hcd, urb, 0);
-+ } else {
-+ /* If we get zout descriptor interrupt before RX was done for a
-+ In Ctrl transfer, then we flag that and it will be finished
-+ in the RX-Interrupt */
-+ urb_priv->ctrl_zout_done = 1;
-+ tc_dbg("Got zout descr interrupt before RX interrupt\n");
-+ }
-+ } else {
-+ /* Shouldn't happen. We expect errors to be caught by epid
-+ attention. */
-+ tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data));
-+ __dump_ep_desc(&(TxCtrlEPList[epid]));
-+ __dump_ept_data(epid);
-+ }
-+ }
-+ }
-+ local_irq_restore(flags);
-+}
-+
-+/* This function goes through all epids that are setup for Out Isoc transfers
-+ and marks (isoc_out_done) all queued URBs that the DMA has finished
-+ transfer for.
-+ No URB completetion is done here to make interrupt routine return quickly.
-+ URBs are completed later with help of complete_isoc_bottom_half() that
-+ becomes schedules when this functions is finished. */
-+static void check_finished_isoc_tx_epids(void) {
-+ unsigned long flags;
-+ int epid;
-+ struct urb *urb;
-+ struct crisv10_urb_priv * urb_priv;
-+ struct USB_SB_Desc* sb_desc;
-+ int epid_done;
-+
-+ /* Protect TxIsocEPList */
-+ local_irq_save(flags);
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID ||
-+ !epid_out_traffic(epid)) {
-+ /* Nothing here to see. */
-+ continue;
-+ }
-+ ASSERT(epid_inuse(epid));
-+ ASSERT(epid_isoc(epid));
-+
-+ sb_desc = phys_to_virt(TxIsocEPList[epid].sub);
-+ /* Find the last descriptor of the currently active URB for this ep.
-+ This is the first descriptor in the sub list marked for a descriptor
-+ interrupt. */
-+ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) {
-+ sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0;
-+ }
-+ ASSERT(sb_desc);
-+
-+ isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n",
-+ epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub),
-+ (unsigned int)sb_desc);
-+
-+ urb = activeUrbList[epid];
-+ if(urb == NULL) {
-+ isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid);
-+ continue;
-+ }
-+
-+ epid_done = 0;
-+ while(urb && !epid_done) {
-+ /* Sanity check. */
-+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
-+ ASSERT(usb_pipeout(urb->pipe));
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+ ASSERT(urb_priv->urb_state == STARTED ||
-+ urb_priv->urb_state == UNLINK);
-+
-+ if (sb_desc != urb_priv->last_sb) {
-+ /* This urb has been sent. */
-+ urb_priv->isoc_out_done = 1;
-+
-+ } else { /* Found URB that has last_sb as the interrupt reason */
-+
-+ /* Check if EP has been disabled, meaning that all transfers are done*/
-+ if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) {
-+ ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) ==
-+ IO_STATE(USB_SB_command, eol, yes));
-+ ASSERT(sb_desc->next == 0);
-+ urb_priv->isoc_out_done = 1;
-+ } else {
-+ isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n",
-+ (unsigned int)urb, urb_priv->urb_num);
-+ }
-+ /* Stop looking any further in queue */
-+ epid_done = 1;
-+ }
-+
-+ if (!epid_done) {
-+ if(urb == activeUrbList[epid]) {
-+ urb = urb_list_first(epid);
-+ } else {
-+ urb = urb_list_next(urb, epid);
-+ }
-+ }
-+ } /* END: while(urb && !epid_done) */
-+ }
-+
-+ local_irq_restore(flags);
-+}
-+
-+
-+/* This is where the Out Isoc URBs are realy completed. This function is
-+ scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers
-+ are done. This functions completes all URBs earlier marked with
-+ isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */
-+
-+static void complete_isoc_bottom_half(void *data) {
-+ struct crisv10_isoc_complete_data *comp_data;
-+ struct usb_iso_packet_descriptor *packet;
-+ struct crisv10_urb_priv * urb_priv;
-+ unsigned long flags;
-+ struct urb* urb;
-+ int epid_done;
-+ int epid;
-+ int i;
-+
-+ comp_data = (struct crisv10_isoc_complete_data*)data;
-+
-+ local_irq_save(flags);
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) {
-+ if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) {
-+ /* Only check valid Out Isoc epids */
-+ continue;
-+ }
-+
-+ isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid,
-+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub));
-+
-+ /* The descriptor interrupt handler has marked all transmitted Out Isoc
-+ URBs with isoc_out_done. Now we traverse all epids and for all that
-+ have out Isoc traffic we traverse its URB list and complete the
-+ transmitted URBs. */
-+ epid_done = 0;
-+ while (!epid_done) {
-+
-+ /* Get the active urb (if any) */
-+ urb = activeUrbList[epid];
-+ if (urb == 0) {
-+ isoc_dbg("No active URB on epid:%d anymore\n", epid);
-+ epid_done = 1;
-+ continue;
-+ }
-+
-+ /* Sanity check. */
-+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS);
-+ ASSERT(usb_pipeout(urb->pipe));
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ if (!(urb_priv->isoc_out_done)) {
-+ /* We have reached URB that isn't flaged done yet, stop traversing. */
-+ isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d"
-+ " before not yet flaged URB:0x%x[%d]\n",
-+ epid, (unsigned int)urb, urb_priv->urb_num);
-+ epid_done = 1;
-+ continue;
-+ }
-+
-+ /* This urb has been sent. */
-+ isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n",
-+ (unsigned int)urb, urb_priv->urb_num);
-+
-+ /* Set ok on transfered packets for this URB and finish it */
-+ for (i = 0; i < urb->number_of_packets; i++) {
-+ packet = &urb->iso_frame_desc[i];
-+ packet->status = 0;
-+ packet->actual_length = packet->length;
-+ }
-+ urb_priv->isoc_packet_counter = urb->number_of_packets;
-+ tc_finish_urb(comp_data->hcd, urb, 0);
-+
-+ } /* END: while(!epid_done) */
-+ } /* END: for(epid...) */
-+
-+ local_irq_restore(flags);
-+ kmem_cache_free(isoc_compl_cache, comp_data);
-+}
-+
-+
-+static void check_finished_intr_tx_epids(struct usb_hcd *hcd) {
-+ unsigned long flags;
-+ int epid;
-+ struct urb *urb;
-+ struct crisv10_urb_priv * urb_priv;
-+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */
-+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */
-+
-+ /* Protect TxintrEPList */
-+ local_irq_save(flags);
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) {
-+ /* Nothing to see on this epid. Only check valid Out Intr epids */
-+ continue;
-+ }
-+
-+ urb = activeUrbList[epid];
-+ if(urb == 0) {
-+ intr_warn("Found Out Intr epid:%d with no active URB\n", epid);
-+ continue;
-+ }
-+
-+ /* Sanity check. */
-+ ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT);
-+ ASSERT(usb_pipeout(urb->pipe));
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+
-+ /* Go through EPs between first and second sof-EP. It's here Out Intr EPs
-+ are inserted.*/
-+ curr_ep = &TxIntrEPList[0];
-+ do {
-+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next);
-+ if(next_ep == urb_priv->intr_ep_pool[0]) {
-+ /* We found the Out Intr EP for this epid */
-+
-+ /* Disable it so it doesn't get processed again */
-+ next_ep->command &= ~IO_MASK(USB_EP_command, enable);
-+
-+ /* Finish the active Out Intr URB with status OK */
-+ tc_finish_urb(hcd, urb, 0);
-+ }
-+ curr_ep = phys_to_virt(curr_ep->next);
-+ } while (curr_ep != &TxIntrEPList[1]);
-+
-+ }
-+ local_irq_restore(flags);
-+}
-+
-+/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */
-+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) {
-+ struct usb_hcd *hcd = (struct usb_hcd*)vhc;
-+ ASSERT(hcd);
-+
-+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) {
-+ /* Clear this interrupt */
-+ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do);
-+ restart_dma8_sub0();
-+ }
-+
-+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) {
-+ /* Clear this interrupt */
-+ *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do);
-+ check_finished_ctrl_tx_epids(hcd);
-+ }
-+
-+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) {
-+ /* Clear this interrupt */
-+ *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do);
-+ check_finished_intr_tx_epids(hcd);
-+ }
-+
-+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) {
-+ struct crisv10_isoc_complete_data* comp_data;
-+
-+ /* Flag done Out Isoc for later completion */
-+ check_finished_isoc_tx_epids();
-+
-+ /* Clear this interrupt */
-+ *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do);
-+ /* Schedule bottom half of Out Isoc completion function. This function
-+ finishes the URBs marked with isoc_out_done */
-+ comp_data = (struct crisv10_isoc_complete_data*)
-+ kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC);
-+ ASSERT(comp_data != NULL);
-+ comp_data ->hcd = hcd;
-+
-+ INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half, comp_data);
-+ schedule_work(&comp_data->usb_bh);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */
-+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) {
-+ unsigned long flags;
-+ struct urb *urb;
-+ struct usb_hcd *hcd = (struct usb_hcd*)vhc;
-+ struct crisv10_urb_priv *urb_priv;
-+ int epid = 0;
-+ int real_error;
-+
-+ ASSERT(hcd);
-+
-+ /* Clear this interrupt. */
-+ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do);
-+
-+ /* Custom clear interrupt for this interrupt */
-+ /* The reason we cli here is that we call the driver's callback functions. */
-+ local_irq_save(flags);
-+
-+ /* Note that this while loop assumes that all packets span only
-+ one rx descriptor. */
-+ while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) {
-+ epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status);
-+ /* Get the active URB for this epid */
-+ urb = activeUrbList[epid];
-+
-+ ASSERT(epid_inuse(epid));
-+ if (!urb) {
-+ dma_err("No urb for epid %d in rx interrupt\n", epid);
-+ goto skip_out;
-+ }
-+
-+ /* Check if any errors on epid */
-+ real_error = 0;
-+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) {
-+ __u32 r_usb_ept_data;
-+
-+ if (usb_pipeisoc(urb->pipe)) {
-+ r_usb_ept_data = etrax_epid_iso_get(epid);
-+ if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) &&
-+ (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) &&
-+ (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) {
-+ /* Not an error, just a failure to receive an expected iso
-+ in packet in this frame. This is not documented
-+ in the designers reference. Continue processing.
-+ */
-+ } else real_error = 1;
-+ } else real_error = 1;
-+ }
-+
-+ if(real_error) {
-+ dma_err("Error in RX descr on epid:%d for URB 0x%x",
-+ epid, (unsigned int)urb);
-+ dump_ept_data(epid);
-+ dump_in_desc(myNextRxDesc);
-+ goto skip_out;
-+ }
-+
-+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv;
-+ ASSERT(urb_priv);
-+ ASSERT(urb_priv->urb_state == STARTED ||
-+ urb_priv->urb_state == UNLINK);
-+
-+ if ((usb_pipetype(urb->pipe) == PIPE_BULK) ||
-+ (usb_pipetype(urb->pipe) == PIPE_CONTROL) ||
-+ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
-+
-+ /* We get nodata for empty data transactions, and the rx descriptor's
-+ hw_len field is not valid in that case. No data to copy in other
-+ words. */
-+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
-+ /* No data to copy */
-+ } else {
-+ /*
-+ dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n",
-+ (unsigned int)urb, epid, myNextRxDesc->hw_len,
-+ urb_priv->rx_offset);
-+ */
-+ /* Only copy data if URB isn't flaged to be unlinked*/
-+ if(urb_priv->urb_state != UNLINK) {
-+ /* Make sure the data fits in the buffer. */
-+ if(urb_priv->rx_offset + myNextRxDesc->hw_len
-+ <= urb->transfer_buffer_length) {
-+
-+ /* Copy the data to URBs buffer */
-+ memcpy(urb->transfer_buffer + urb_priv->rx_offset,
-+ phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len);
-+ urb_priv->rx_offset += myNextRxDesc->hw_len;
-+ } else {
-+ /* Signal overflow when returning URB */
-+ urb->status = -EOVERFLOW;
-+ tc_finish_urb_later(hcd, urb, urb->status);
-+ }
-+ }
-+ }
-+
-+ /* Check if it was the last packet in the transfer */
-+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) {
-+ /* Special handling for In Ctrl URBs. */
-+ if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) &&
-+ !(urb_priv->ctrl_zout_done)) {
-+ /* Flag that RX part of Ctrl transfer is done. Because zout descr
-+ interrupt hasn't happend yet will the URB be finished in the
-+ TX-Interrupt. */
-+ urb_priv->ctrl_rx_done = 1;
-+ tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting"
-+ " for zout\n", (unsigned int)urb);
-+ } else {
-+ tc_finish_urb(hcd, urb, 0);
-+ }
-+ }
-+ } else { /* ISOC RX */
-+ /*
-+ isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n",
-+ epid, (unsigned int)urb);
-+ */
-+
-+ struct usb_iso_packet_descriptor *packet;
-+
-+ if (urb_priv->urb_state == UNLINK) {
-+ isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n");
-+ goto skip_out;
-+ } else if (urb_priv->urb_state == NOT_STARTED) {
-+ isoc_err("What? Got Rx data for Isoc urb that isn't started?\n");
-+ goto skip_out;
-+ }
-+
-+ packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter];
-+ ASSERT(packet);
-+ packet->status = 0;
-+
-+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) {
-+ /* We get nodata for empty data transactions, and the rx descriptor's
-+ hw_len field is not valid in that case. We copy 0 bytes however to
-+ stay in synch. */
-+ packet->actual_length = 0;
-+ } else {
-+ packet->actual_length = myNextRxDesc->hw_len;
-+ /* Make sure the data fits in the buffer. */
-+ ASSERT(packet->actual_length <= packet->length);
-+ memcpy(urb->transfer_buffer + packet->offset,
-+ phys_to_virt(myNextRxDesc->buf), packet->actual_length);
-+ if(packet->actual_length > 0)
-+ isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n",
-+ packet->actual_length, urb_priv->isoc_packet_counter,
-+ (unsigned int)urb, urb_priv->urb_num);
-+ }
-+
-+ /* Increment the packet counter. */
-+ urb_priv->isoc_packet_counter++;
-+
-+ /* Note that we don't care about the eot field in the rx descriptor's
-+ status. It will always be set for isoc traffic. */
-+ if (urb->number_of_packets == urb_priv->isoc_packet_counter) {
-+ /* Complete the urb with status OK. */
-+ tc_finish_urb(hcd, urb, 0);
-+ }
-+ }
-+
-+ skip_out:
-+ myNextRxDesc->status = 0;
-+ myNextRxDesc->command |= IO_MASK(USB_IN_command, eol);
-+ myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol);
-+ myLastRxDesc = myNextRxDesc;
-+ myNextRxDesc = phys_to_virt(myNextRxDesc->next);
-+ flush_etrax_cache();
-+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart);
-+ }
-+
-+ local_irq_restore(flags);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void tc_bulk_start_timer_func(unsigned long dummy) {
-+ /* We might enable an EP descriptor behind the current DMA position when
-+ it's about to decide that there are no more bulk traffic and it should
-+ stop the bulk channel.
-+ Therefore we periodically check if the bulk channel is stopped and there
-+ is an enabled bulk EP descriptor, in which case we start the bulk
-+ channel. */
-+
-+ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) {
-+ int epid;
-+
-+ timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n");
-+
-+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) {
-+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) {
-+ timer_warn("Found enabled EP for epid %d, starting bulk channel.\n",
-+ epid);
-+ restart_dma8_sub0();
-+
-+ /* Restart the bulk eot timer since we just started the bulk channel.*/
-+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL);
-+
-+ /* No need to search any further. */
-+ break;
-+ }
-+ }
-+ } else {
-+ timer_dbg("bulk_start_timer: Bulk DMA channel running.\n");
-+ }
-+}
-+
-+static void tc_bulk_eot_timer_func(unsigned long dummy) {
-+ struct usb_hcd *hcd = (struct usb_hcd*)dummy;
-+ ASSERT(hcd);
-+ /* Because of a race condition in the top half, we might miss a bulk eot.
-+ This timer "simulates" a bulk eot if we don't get one for a while,
-+ hopefully correcting the situation. */
-+ timer_dbg("bulk_eot_timer timed out.\n");
-+ check_finished_bulk_tx_epids(hcd, 1);
-+}
-+
-+
-+/*************************************************************/
-+/*************************************************************/
-+/* Device driver block */
-+/*************************************************************/
-+/*************************************************************/
-+
-+/* Forward declarations for device driver functions */
-+static int devdrv_hcd_probe(struct device *);
-+static int devdrv_hcd_remove(struct device *);
-+#ifdef CONFIG_PM
-+static int devdrv_hcd_suspend(struct device *, u32, u32);
-+static int devdrv_hcd_resume(struct device *, u32);
-+#endif /* CONFIG_PM */
-+
-+/* the device */
-+static struct platform_device *devdrv_hc_platform_device;
-+
-+/* device driver interface */
-+static struct device_driver devdrv_hc_device_driver = {
-+ .name = (char *) hc_name,
-+ .bus = &platform_bus_type,
-+
-+ .probe = devdrv_hcd_probe,
-+ .remove = devdrv_hcd_remove,
-+
-+#ifdef CONFIG_PM
-+ .suspend = devdrv_hcd_suspend,
-+ .resume = devdrv_hcd_resume,
-+#endif /* CONFIG_PM */
-+};
-+
-+/* initialize the host controller and driver */
-+static int __init_or_module devdrv_hcd_probe(struct device *dev)
-+{
-+ struct usb_hcd *hcd;
-+ struct crisv10_hcd *crisv10_hcd;
-+ int retval;
-+
-+ /* Check DMA burst length */
-+ if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) !=
-+ IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) {
-+ devdrv_err("Invalid DMA burst length in Etrax 100LX,"
-+ " needs to be 32\n");
-+ return -EPERM;
-+ }
-+
-+ hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev->bus_id);
-+ if (!hcd)
-+ return -ENOMEM;
-+
-+ crisv10_hcd = hcd_to_crisv10_hcd(hcd);
-+ spin_lock_init(&crisv10_hcd->lock);
-+ crisv10_hcd->num_ports = num_ports();
-+ crisv10_hcd->running = 0;
-+
-+ dev_set_drvdata(dev, crisv10_hcd);
-+
-+ devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ,
-+ ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ);
-+
-+ /* Print out chip version read from registers */
-+ int rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major);
-+ int rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor);
-+ if(rev_min == 0) {
-+ devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj);
-+ } else {
-+ devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min);
-+ }
-+
-+ devdrv_info("Bulk timer interval, start:%d eot:%d\n",
-+ BULK_START_TIMER_INTERVAL,
-+ BULK_EOT_TIMER_INTERVAL);
-+
-+
-+ /* Init root hub data structures */
-+ if(rh_init()) {
-+ devdrv_err("Failed init data for Root Hub\n");
-+ retval = -ENOMEM;
-+ }
-+
-+ if(port_in_use(0)) {
-+ if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) {
-+ printk(KERN_CRIT "usb-host: request IO interface usb1 failed");
-+ retval = -EBUSY;
-+ goto out;
-+ }
-+ devdrv_info("Claimed interface for USB physical port 1\n");
-+ }
-+ if(port_in_use(1)) {
-+ if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) {
-+ /* Free first interface if second failed to be claimed */
-+ if(port_in_use(0)) {
-+ cris_free_io_interface(if_usb_1);
-+ }
-+ printk(KERN_CRIT "usb-host: request IO interface usb2 failed");
-+ retval = -EBUSY;
-+ goto out;
-+ }
-+ devdrv_info("Claimed interface for USB physical port 2\n");
-+ }
-+
-+ /* Init transfer controller structs and locks */
-+ if((retval = tc_init(hcd)) != 0) {
-+ goto out;
-+ }
-+
-+ /* Attach interrupt functions for DMA and init DMA controller */
-+ if((retval = tc_dma_init(hcd)) != 0) {
-+ goto out;
-+ }
-+
-+ /* Attach the top IRQ handler for USB controller interrupts */
-+ if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0,
-+ "ETRAX 100LX built-in USB (HC)", hcd)) {
-+ err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ);
-+ retval = -EBUSY;
-+ goto out;
-+ }
-+
-+ /* iso_eof is only enabled when isoc traffic is running. */
-+ *R_USB_IRQ_MASK_SET =
-+ /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */
-+ IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) |
-+ IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) |
-+ IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) |
-+ IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set);
-+
-+
-+ crisv10_ready_wait();
-+ /* Reset the USB interface. */
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset);
-+
-+ /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to
-+ 0x2A30 (10800), to guarantee that control traffic gets 10% of the
-+ bandwidth, and periodic transfer may allocate the rest (90%).
-+ This doesn't work though.
-+ The value 11960 is chosen to be just after the SOF token, with a couple
-+ of bit times extra for possible bit stuffing. */
-+ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960);
-+
-+ crisv10_ready_wait();
-+ /* Configure the USB interface as a host controller. */
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config);
-+
-+
-+ /* Check so controller not busy before enabling ports */
-+ crisv10_ready_wait();
-+
-+ /* Enable selected USB ports */
-+ if(port_in_use(0)) {
-+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no);
-+ } else {
-+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes);
-+ }
-+ if(port_in_use(1)) {
-+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no);
-+ } else {
-+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes);
-+ }
-+
-+ crisv10_ready_wait();
-+ /* Start processing of USB traffic. */
-+ *R_USB_COMMAND =
-+ IO_STATE(R_USB_COMMAND, port_sel, nop) |
-+ IO_STATE(R_USB_COMMAND, port_cmd, reset) |
-+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run);
-+
-+ /* Do not continue probing initialization before USB interface is done */
-+ crisv10_ready_wait();
-+
-+ /* Register our Host Controller to USB Core
-+ * Finish the remaining parts of generic HCD initialization: allocate the
-+ * buffers of consistent memory, register the bus
-+ * and call the driver's reset() and start() routines. */
-+ retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED);
-+ if (retval != 0) {
-+ devdrv_err("Failed registering HCD driver\n");
-+ goto out;
-+ }
-+
-+ return 0;
-+
-+ out:
-+ devdrv_hcd_remove(dev);
-+ return retval;
-+}
-+
-+
-+/* cleanup after the host controller and driver */
-+static int __init_or_module devdrv_hcd_remove(struct device *dev)
-+{
-+ struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev);
-+ struct usb_hcd *hcd;
-+
-+ if (!crisv10_hcd)
-+ return 0;
-+ hcd = crisv10_hcd_to_hcd(crisv10_hcd);
-+
-+
-+ /* Stop USB Controller in Etrax 100LX */
-+ crisv10_hcd_reset(hcd);
-+
-+ usb_remove_hcd(hcd);
-+ devdrv_dbg("Removed HCD from USB Core\n");
-+
-+ /* Free USB Controller IRQ */
-+ free_irq(ETRAX_USB_HC_IRQ, NULL);
-+
-+ /* Free resources */
-+ tc_dma_destroy();
-+ tc_destroy();
-+
-+
-+ if(port_in_use(0)) {
-+ cris_free_io_interface(if_usb_1);
-+ }
-+ if(port_in_use(1)) {
-+ cris_free_io_interface(if_usb_2);
-+ }
-+
-+ devdrv_dbg("Freed all claimed resources\n");
-+
-+ return 0;
-+}
-+
-+
-+#ifdef CONFIG_PM
-+
-+static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level)
-+{
-+ return 0; /* no-op for now */
-+}
-+
-+static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level)
-+{
-+ return 0; /* no-op for now */
-+}
-+
-+#endif /* CONFIG_PM */
-+
-+
-+
-+/*************************************************************/
-+/*************************************************************/
-+/* Module block */
-+/*************************************************************/
-+/*************************************************************/
-+
-+/* register driver */
-+static int __init module_hcd_init(void)
-+{
-+
-+ if (usb_disabled())
-+ return -ENODEV;
-+
-+ /* Here we select enabled ports by following defines created from
-+ menuconfig */
-+#ifndef CONFIG_ETRAX_USB_HOST_PORT1
-+ ports &= ~(1<<0);
-+#endif
-+#ifndef CONFIG_ETRAX_USB_HOST_PORT2
-+ ports &= ~(1<<1);
-+#endif
-+
-+ printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc);
-+
-+ devdrv_hc_platform_device =
-+ platform_device_register_simple((char *) hc_name, 0, NULL, 0);
-+
-+ if (IS_ERR(devdrv_hc_platform_device))
-+ return PTR_ERR(devdrv_hc_platform_device);
-+ return driver_register(&devdrv_hc_device_driver);
-+ /*
-+ * Note that we do not set the DMA mask for the device,
-+ * i.e. we pretend that we will use PIO, since no specific
-+ * allocation routines are needed for DMA buffers. This will
-+ * cause the HCD buffer allocation routines to fall back to
-+ * kmalloc().
-+ */
-+}
-+
-+/* unregister driver */
-+static void __exit module_hcd_exit(void)
-+{
-+ driver_unregister(&devdrv_hc_device_driver);
-+}
-+
-+
-+/* Module hooks */
-+module_init(module_hcd_init);
-+module_exit(module_hcd_exit);
---- linux-2.6.19.2.orig/drivers/usb/host/hc_crisv10.h 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/usb/host/hc_crisv10.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,289 +0,0 @@
--#ifndef __LINUX_ETRAX_USB_H
--#define __LINUX_ETRAX_USB_H
--
--#include <linux/types.h>
--#include <linux/list.h>
--
--typedef struct USB_IN_Desc {
-- volatile __u16 sw_len;
-- volatile __u16 command;
-- volatile unsigned long next;
-- volatile unsigned long buf;
-- volatile __u16 hw_len;
-- volatile __u16 status;
--} USB_IN_Desc_t;
--
--typedef struct USB_SB_Desc {
-- volatile __u16 sw_len;
-- volatile __u16 command;
-- volatile unsigned long next;
-- volatile unsigned long buf;
-- __u32 dummy;
--} USB_SB_Desc_t;
--
--typedef struct USB_EP_Desc {
-- volatile __u16 hw_len;
-- volatile __u16 command;
-- volatile unsigned long sub;
-- volatile unsigned long next;
-- __u32 dummy;
--} USB_EP_Desc_t;
--
--struct virt_root_hub {
-- int devnum;
-- void *urb;
-- void *int_addr;
-- int send;
-- int interval;
-- int numports;
-- struct timer_list rh_int_timer;
-- volatile __u16 wPortChange_1;
-- volatile __u16 wPortChange_2;
-- volatile __u16 prev_wPortStatus_1;
-- volatile __u16 prev_wPortStatus_2;
--};
--
--struct etrax_usb_intr_traffic {
-- int sleeping;
-- int error;
-- struct wait_queue *wq;
--};
--
--typedef struct etrax_usb_hc {
-- struct usb_bus *bus;
-- struct virt_root_hub rh;
-- struct etrax_usb_intr_traffic intr;
--} etrax_hc_t;
--
--typedef enum {
-- STARTED,
-- NOT_STARTED,
-- UNLINK,
-- TRANSFER_DONE,
-- WAITING_FOR_DESCR_INTR
--} etrax_usb_urb_state_t;
--
--
--
--typedef struct etrax_usb_urb_priv {
-- /* The first_sb field is used for freeing all SB descriptors belonging
-- to an urb. The corresponding ep descriptor's sub pointer cannot be
-- used for this since the DMA advances the sub pointer as it processes
-- the sb list. */
-- USB_SB_Desc_t *first_sb;
-- /* The last_sb field referes to the last SB descriptor that belongs to
-- this urb. This is important to know so we can free the SB descriptors
-- that ranges between first_sb and last_sb. */
-- USB_SB_Desc_t *last_sb;
--
-- /* The rx_offset field is used in ctrl and bulk traffic to keep track
-- of the offset in the urb's transfer_buffer where incoming data should be
-- copied to. */
-- __u32 rx_offset;
--
-- /* Counter used in isochronous transfers to keep track of the
-- number of packets received/transmitted. */
-- __u32 isoc_packet_counter;
--
-- /* This field is used to pass information about the urb's current state between
-- the various interrupt handlers (thus marked volatile). */
-- volatile etrax_usb_urb_state_t urb_state;
--
-- /* Connection between the submitted urb and ETRAX epid number */
-- __u8 epid;
--
-- /* The rx_data_list field is used for periodic traffic, to hold
-- received data for later processing in the the complete_urb functions,
-- where the data us copied to the urb's transfer_buffer. Basically, we
-- use this intermediate storage because we don't know when it's safe to
-- reuse the transfer_buffer (FIXME?). */
-- struct list_head rx_data_list;
--} etrax_urb_priv_t;
--
--/* This struct is for passing data from the top half to the bottom half. */
--typedef struct usb_interrupt_registers
--{
-- etrax_hc_t *hc;
-- __u32 r_usb_epid_attn;
-- __u8 r_usb_status;
-- __u16 r_usb_rh_port_status_1;
-- __u16 r_usb_rh_port_status_2;
-- __u32 r_usb_irq_mask_read;
-- __u32 r_usb_fm_number;
-- struct work_struct usb_bh;
--} usb_interrupt_registers_t;
--
--/* This struct is for passing data from the isoc top half to the isoc bottom half. */
--typedef struct usb_isoc_complete_data
--{
-- struct urb *urb;
-- struct work_struct usb_bh;
--} usb_isoc_complete_data_t;
--
--/* This struct holds data we get from the rx descriptors for DMA channel 9
-- for periodic traffic (intr and isoc). */
--typedef struct rx_data
--{
-- void *data;
-- int length;
-- struct list_head list;
--} rx_data_t;
--
--typedef struct urb_entry
--{
-- struct urb *urb;
-- struct list_head list;
--} urb_entry_t;
--
--/* ---------------------------------------------------------------------------
-- Virtual Root HUB
-- ------------------------------------------------------------------------- */
--/* destination of request */
--#define RH_INTERFACE 0x01
--#define RH_ENDPOINT 0x02
--#define RH_OTHER 0x03
--
--#define RH_CLASS 0x20
--#define RH_VENDOR 0x40
--
--/* Requests: bRequest << 8 | bmRequestType */
--#define RH_GET_STATUS 0x0080
--#define RH_CLEAR_FEATURE 0x0100
--#define RH_SET_FEATURE 0x0300
--#define RH_SET_ADDRESS 0x0500
--#define RH_GET_DESCRIPTOR 0x0680
--#define RH_SET_DESCRIPTOR 0x0700
--#define RH_GET_CONFIGURATION 0x0880
--#define RH_SET_CONFIGURATION 0x0900
--#define RH_GET_STATE 0x0280
--#define RH_GET_INTERFACE 0x0A80
--#define RH_SET_INTERFACE 0x0B00
--#define RH_SYNC_FRAME 0x0C80
--/* Our Vendor Specific Request */
--#define RH_SET_EP 0x2000
--
--
--/* Hub port features */
--#define RH_PORT_CONNECTION 0x00
--#define RH_PORT_ENABLE 0x01
--#define RH_PORT_SUSPEND 0x02
--#define RH_PORT_OVER_CURRENT 0x03
--#define RH_PORT_RESET 0x04
--#define RH_PORT_POWER 0x08
--#define RH_PORT_LOW_SPEED 0x09
--#define RH_C_PORT_CONNECTION 0x10
--#define RH_C_PORT_ENABLE 0x11
--#define RH_C_PORT_SUSPEND 0x12
--#define RH_C_PORT_OVER_CURRENT 0x13
--#define RH_C_PORT_RESET 0x14
--
--/* Hub features */
--#define RH_C_HUB_LOCAL_POWER 0x00
--#define RH_C_HUB_OVER_CURRENT 0x01
--
--#define RH_DEVICE_REMOTE_WAKEUP 0x00
--#define RH_ENDPOINT_STALL 0x01
--
--/* Our Vendor Specific feature */
--#define RH_REMOVE_EP 0x00
--
--
--#define RH_ACK 0x01
--#define RH_REQ_ERR -1
--#define RH_NACK 0x00
--
--/* Field definitions for */
--
--#define USB_IN_command__eol__BITNR 0 /* command macros */
--#define USB_IN_command__eol__WIDTH 1
--#define USB_IN_command__eol__no 0
--#define USB_IN_command__eol__yes 1
--
--#define USB_IN_command__intr__BITNR 3
--#define USB_IN_command__intr__WIDTH 1
--#define USB_IN_command__intr__no 0
--#define USB_IN_command__intr__yes 1
--
--#define USB_IN_status__eop__BITNR 1 /* status macros. */
--#define USB_IN_status__eop__WIDTH 1
--#define USB_IN_status__eop__no 0
--#define USB_IN_status__eop__yes 1
--
--#define USB_IN_status__eot__BITNR 5
--#define USB_IN_status__eot__WIDTH 1
--#define USB_IN_status__eot__no 0
--#define USB_IN_status__eot__yes 1
--
--#define USB_IN_status__error__BITNR 6
--#define USB_IN_status__error__WIDTH 1
--#define USB_IN_status__error__no 0
--#define USB_IN_status__error__yes 1
--
--#define USB_IN_status__nodata__BITNR 7
--#define USB_IN_status__nodata__WIDTH 1
--#define USB_IN_status__nodata__no 0
--#define USB_IN_status__nodata__yes 1
--
--#define USB_IN_status__epid__BITNR 8
--#define USB_IN_status__epid__WIDTH 5
--
--#define USB_EP_command__eol__BITNR 0
--#define USB_EP_command__eol__WIDTH 1
--#define USB_EP_command__eol__no 0
--#define USB_EP_command__eol__yes 1
--
--#define USB_EP_command__eof__BITNR 1
--#define USB_EP_command__eof__WIDTH 1
--#define USB_EP_command__eof__no 0
--#define USB_EP_command__eof__yes 1
--
--#define USB_EP_command__intr__BITNR 3
--#define USB_EP_command__intr__WIDTH 1
--#define USB_EP_command__intr__no 0
--#define USB_EP_command__intr__yes 1
--
--#define USB_EP_command__enable__BITNR 4
--#define USB_EP_command__enable__WIDTH 1
--#define USB_EP_command__enable__no 0
--#define USB_EP_command__enable__yes 1
--
--#define USB_EP_command__hw_valid__BITNR 5
--#define USB_EP_command__hw_valid__WIDTH 1
--#define USB_EP_command__hw_valid__no 0
--#define USB_EP_command__hw_valid__yes 1
--
--#define USB_EP_command__epid__BITNR 8
--#define USB_EP_command__epid__WIDTH 5
--
--#define USB_SB_command__eol__BITNR 0 /* command macros. */
--#define USB_SB_command__eol__WIDTH 1
--#define USB_SB_command__eol__no 0
--#define USB_SB_command__eol__yes 1
--
--#define USB_SB_command__eot__BITNR 1
--#define USB_SB_command__eot__WIDTH 1
--#define USB_SB_command__eot__no 0
--#define USB_SB_command__eot__yes 1
--
--#define USB_SB_command__intr__BITNR 3
--#define USB_SB_command__intr__WIDTH 1
--#define USB_SB_command__intr__no 0
--#define USB_SB_command__intr__yes 1
--
--#define USB_SB_command__tt__BITNR 4
--#define USB_SB_command__tt__WIDTH 2
--#define USB_SB_command__tt__zout 0
--#define USB_SB_command__tt__in 1
--#define USB_SB_command__tt__out 2
--#define USB_SB_command__tt__setup 3
--
--
--#define USB_SB_command__rem__BITNR 8
--#define USB_SB_command__rem__WIDTH 6
--
--#define USB_SB_command__full__BITNR 6
--#define USB_SB_command__full__WIDTH 1
--#define USB_SB_command__full__no 0
--#define USB_SB_command__full__yes 1
--
--#endif
---- linux-2.6.19.2.orig/drivers/usb/host/hc-crisv10.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.h 2006-01-27 13:59:58.000000000 +0100
-@@ -0,0 +1,330 @@
-+#ifndef __LINUX_ETRAX_USB_H
-+#define __LINUX_ETRAX_USB_H
-+
-+#include <linux/types.h>
-+#include <linux/list.h>
-+
-+struct USB_IN_Desc {
-+ volatile __u16 sw_len;
-+ volatile __u16 command;
-+ volatile unsigned long next;
-+ volatile unsigned long buf;
-+ volatile __u16 hw_len;
-+ volatile __u16 status;
-+};
-+
-+struct USB_SB_Desc {
-+ volatile __u16 sw_len;
-+ volatile __u16 command;
-+ volatile unsigned long next;
-+ volatile unsigned long buf;
-+};
-+
-+struct USB_EP_Desc {
-+ volatile __u16 hw_len;
-+ volatile __u16 command;
-+ volatile unsigned long sub;
-+ volatile unsigned long next;
-+};
-+
-+
-+/* Root Hub port status struct */
-+struct crisv10_rh {
-+ volatile __u16 wPortChange[2];
-+ volatile __u16 wPortStatusPrev[2];
-+};
-+
-+/* HCD description */
-+struct crisv10_hcd {
-+ spinlock_t lock;
-+ __u8 num_ports;
-+ __u8 running;
-+};
-+
-+
-+/* Endpoint HC private data description */
-+struct crisv10_ep_priv {
-+ int epid;
-+};
-+
-+/* Additional software state info for a USB Controller epid */
-+struct etrax_epid {
-+ __u8 inuse; /* !0 = setup in Etrax and used for a endpoint */
-+ __u8 disabled; /* !0 = Temporarly disabled to avoid resubmission */
-+ __u8 type; /* Setup as: PIPE_BULK, PIPE_CONTROL ... */
-+ __u8 out_traffic; /* !0 = This epid is for out traffic */
-+};
-+
-+/* Struct to hold information of scheduled later URB completion */
-+struct urb_later_data {
-+ struct work_struct ws;
-+ struct usb_hcd *hcd;
-+ struct urb *urb;
-+ int urb_num;
-+ int status;
-+};
-+
-+
-+typedef enum {
-+ STARTED,
-+ NOT_STARTED,
-+ UNLINK,
-+} crisv10_urb_state_t;
-+
-+
-+struct crisv10_urb_priv {
-+ /* Sequence number for this URB. Every new submited URB gets this from
-+ a incrementing counter. Used when a URB is scheduled for later finish to
-+ be sure that the intended URB hasn't already been completed (device
-+ drivers has a tendency to reuse URBs once they are completed, causing us
-+ to not be able to single old ones out only based on the URB pointer.) */
-+ __u32 urb_num;
-+
-+ /* The first_sb field is used for freeing all SB descriptors belonging
-+ to an urb. The corresponding ep descriptor's sub pointer cannot be
-+ used for this since the DMA advances the sub pointer as it processes
-+ the sb list. */
-+ struct USB_SB_Desc *first_sb;
-+
-+ /* The last_sb field referes to the last SB descriptor that belongs to
-+ this urb. This is important to know so we can free the SB descriptors
-+ that ranges between first_sb and last_sb. */
-+ struct USB_SB_Desc *last_sb;
-+
-+ /* The rx_offset field is used in ctrl and bulk traffic to keep track
-+ of the offset in the urb's transfer_buffer where incoming data should be
-+ copied to. */
-+ __u32 rx_offset;
-+
-+ /* Counter used in isochronous transfers to keep track of the
-+ number of packets received/transmitted. */
-+ __u32 isoc_packet_counter;
-+
-+ /* Flag that marks if this Isoc Out URB has finished it's transfer. Used
-+ because several URBs can be finished before list is processed */
-+ __u8 isoc_out_done;
-+
-+ /* This field is used to pass information about the urb's current state
-+ between the various interrupt handlers (thus marked volatile). */
-+ volatile crisv10_urb_state_t urb_state;
-+
-+ /* In Ctrl transfers consist of (at least) 3 packets: SETUP, IN and ZOUT.
-+ When DMA8 sub-channel 2 has processed the SB list for this sequence we
-+ get a interrupt. We also get a interrupt for In transfers and which
-+ one of these interrupts that comes first depends of data size and device.
-+ To be sure that we have got both interrupts before we complete the URB
-+ we have these to flags that shows which part that has completed.
-+ We can then check when we get one of the interrupts that if the other has
-+ occured it's safe for us to complete the URB, otherwise we set appropriate
-+ flag and do the completion when we get the other interrupt. */
-+ volatile unsigned char ctrl_zout_done;
-+ volatile unsigned char ctrl_rx_done;
-+
-+ /* Connection between the submitted urb and ETRAX epid number */
-+ __u8 epid;
-+
-+ /* The rx_data_list field is used for periodic traffic, to hold
-+ received data for later processing in the the complete_urb functions,
-+ where the data us copied to the urb's transfer_buffer. Basically, we
-+ use this intermediate storage because we don't know when it's safe to
-+ reuse the transfer_buffer (FIXME?). */
-+ struct list_head rx_data_list;
-+
-+
-+ /* The interval time rounded up to closest 2^N */
-+ int interval;
-+
-+ /* Pool of EP descriptors needed if it's a INTR transfer.
-+ Amount of EPs in pool correspons to how many INTR that should
-+ be inserted in TxIntrEPList (max 128, defined by MAX_INTR_INTERVAL) */
-+ struct USB_EP_Desc* intr_ep_pool[128];
-+
-+ /* The mount of EPs allocated for this INTR URB */
-+ int intr_ep_pool_length;
-+
-+ /* Pointer to info struct if URB is scheduled to be finished later */
-+ struct urb_later_data* later_data;
-+};
-+
-+
-+/* This struct is for passing data from the top half to the bottom half irq
-+ handlers */
-+struct crisv10_irq_reg {
-+ struct usb_hcd* hcd;
-+ __u32 r_usb_epid_attn;
-+ __u8 r_usb_status;
-+ __u16 r_usb_rh_port_status_1;
-+ __u16 r_usb_rh_port_status_2;
-+ __u32 r_usb_irq_mask_read;
-+ __u32 r_usb_fm_number;
-+ struct work_struct usb_bh;
-+};
-+
-+
-+/* This struct is for passing data from the isoc top half to the isoc bottom
-+ half. */
-+struct crisv10_isoc_complete_data {
-+ struct usb_hcd *hcd;
-+ struct urb *urb;
-+ struct work_struct usb_bh;
-+};
-+
-+/* Entry item for URB lists for each endpint */
-+typedef struct urb_entry
-+{
-+ struct urb *urb;
-+ struct list_head list;
-+} urb_entry_t;
-+
-+/* ---------------------------------------------------------------------------
-+ Virtual Root HUB
-+ ------------------------------------------------------------------------- */
-+/* destination of request */
-+#define RH_INTERFACE 0x01
-+#define RH_ENDPOINT 0x02
-+#define RH_OTHER 0x03
-+
-+#define RH_CLASS 0x20
-+#define RH_VENDOR 0x40
-+
-+/* Requests: bRequest << 8 | bmRequestType */
-+#define RH_GET_STATUS 0x0080
-+#define RH_CLEAR_FEATURE 0x0100
-+#define RH_SET_FEATURE 0x0300
-+#define RH_SET_ADDRESS 0x0500
-+#define RH_GET_DESCRIPTOR 0x0680
-+#define RH_SET_DESCRIPTOR 0x0700
-+#define RH_GET_CONFIGURATION 0x0880
-+#define RH_SET_CONFIGURATION 0x0900
-+#define RH_GET_STATE 0x0280
-+#define RH_GET_INTERFACE 0x0A80
-+#define RH_SET_INTERFACE 0x0B00
-+#define RH_SYNC_FRAME 0x0C80
-+/* Our Vendor Specific Request */
-+#define RH_SET_EP 0x2000
-+
-+
-+/* Hub port features */
-+#define RH_PORT_CONNECTION 0x00
-+#define RH_PORT_ENABLE 0x01
-+#define RH_PORT_SUSPEND 0x02
-+#define RH_PORT_OVER_CURRENT 0x03
-+#define RH_PORT_RESET 0x04
-+#define RH_PORT_POWER 0x08
-+#define RH_PORT_LOW_SPEED 0x09
-+#define RH_C_PORT_CONNECTION 0x10
-+#define RH_C_PORT_ENABLE 0x11
-+#define RH_C_PORT_SUSPEND 0x12
-+#define RH_C_PORT_OVER_CURRENT 0x13
-+#define RH_C_PORT_RESET 0x14
-+
-+/* Hub features */
-+#define RH_C_HUB_LOCAL_POWER 0x00
-+#define RH_C_HUB_OVER_CURRENT 0x01
-+
-+#define RH_DEVICE_REMOTE_WAKEUP 0x00
-+#define RH_ENDPOINT_STALL 0x01
-+
-+/* Our Vendor Specific feature */
-+#define RH_REMOVE_EP 0x00
-+
-+
-+#define RH_ACK 0x01
-+#define RH_REQ_ERR -1
-+#define RH_NACK 0x00
-+
-+/* Field definitions for */
-+
-+#define USB_IN_command__eol__BITNR 0 /* command macros */
-+#define USB_IN_command__eol__WIDTH 1
-+#define USB_IN_command__eol__no 0
-+#define USB_IN_command__eol__yes 1
-+
-+#define USB_IN_command__intr__BITNR 3
-+#define USB_IN_command__intr__WIDTH 1
-+#define USB_IN_command__intr__no 0
-+#define USB_IN_command__intr__yes 1
-+
-+#define USB_IN_status__eop__BITNR 1 /* status macros. */
-+#define USB_IN_status__eop__WIDTH 1
-+#define USB_IN_status__eop__no 0
-+#define USB_IN_status__eop__yes 1
-+
-+#define USB_IN_status__eot__BITNR 5
-+#define USB_IN_status__eot__WIDTH 1
-+#define USB_IN_status__eot__no 0
-+#define USB_IN_status__eot__yes 1
-+
-+#define USB_IN_status__error__BITNR 6
-+#define USB_IN_status__error__WIDTH 1
-+#define USB_IN_status__error__no 0
-+#define USB_IN_status__error__yes 1
-+
-+#define USB_IN_status__nodata__BITNR 7
-+#define USB_IN_status__nodata__WIDTH 1
-+#define USB_IN_status__nodata__no 0
-+#define USB_IN_status__nodata__yes 1
-+
-+#define USB_IN_status__epid__BITNR 8
-+#define USB_IN_status__epid__WIDTH 5
-+
-+#define USB_EP_command__eol__BITNR 0
-+#define USB_EP_command__eol__WIDTH 1
-+#define USB_EP_command__eol__no 0
-+#define USB_EP_command__eol__yes 1
-+
-+#define USB_EP_command__eof__BITNR 1
-+#define USB_EP_command__eof__WIDTH 1
-+#define USB_EP_command__eof__no 0
-+#define USB_EP_command__eof__yes 1
-+
-+#define USB_EP_command__intr__BITNR 3
-+#define USB_EP_command__intr__WIDTH 1
-+#define USB_EP_command__intr__no 0
-+#define USB_EP_command__intr__yes 1
-+
-+#define USB_EP_command__enable__BITNR 4
-+#define USB_EP_command__enable__WIDTH 1
-+#define USB_EP_command__enable__no 0
-+#define USB_EP_command__enable__yes 1
-+
-+#define USB_EP_command__hw_valid__BITNR 5
-+#define USB_EP_command__hw_valid__WIDTH 1
-+#define USB_EP_command__hw_valid__no 0
-+#define USB_EP_command__hw_valid__yes 1
-+
-+#define USB_EP_command__epid__BITNR 8
-+#define USB_EP_command__epid__WIDTH 5
-+
-+#define USB_SB_command__eol__BITNR 0 /* command macros. */
-+#define USB_SB_command__eol__WIDTH 1
-+#define USB_SB_command__eol__no 0
-+#define USB_SB_command__eol__yes 1
-+
-+#define USB_SB_command__eot__BITNR 1
-+#define USB_SB_command__eot__WIDTH 1
-+#define USB_SB_command__eot__no 0
-+#define USB_SB_command__eot__yes 1
-+
-+#define USB_SB_command__intr__BITNR 3
-+#define USB_SB_command__intr__WIDTH 1
-+#define USB_SB_command__intr__no 0
-+#define USB_SB_command__intr__yes 1
-+
-+#define USB_SB_command__tt__BITNR 4
-+#define USB_SB_command__tt__WIDTH 2
-+#define USB_SB_command__tt__zout 0
-+#define USB_SB_command__tt__in 1
-+#define USB_SB_command__tt__out 2
-+#define USB_SB_command__tt__setup 3
-+
-+
-+#define USB_SB_command__rem__BITNR 8
-+#define USB_SB_command__rem__WIDTH 6
-+
-+#define USB_SB_command__full__BITNR 6
-+#define USB_SB_command__full__WIDTH 1
-+#define USB_SB_command__full__no 0
-+#define USB_SB_command__full__yes 1
-+
-+#endif
-diff -urN linux-2.6.19.2.orig/drivers/net/cris/Makefile linux-2.6.19.2.dev/drivers/net/cris/Makefile
---- linux-2.6.19.2.orig/drivers/net/cris/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/net/cris/Makefile 2005-01-04 13:09:12.000000000 +0100
-@@ -1 +1,2 @@
- obj-$(CONFIG_ETRAX_ARCH_V10) += eth_v10.o
-+obj-$(CONFIG_ETRAX_ARCH_V32) += eth_v32.o
-diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v10.c linux-2.6.19.2.dev/drivers/net/cris/eth_v10.c
---- linux-2.6.19.2.orig/drivers/net/cris/eth_v10.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/net/cris/eth_v10.c 2007-01-15 16:35:48.000000000 +0100
-@@ -1,221 +1,10 @@
--/* $Id: ethernet.c,v 1.31 2004/10/18 14:49:03 starvik Exp $
-- *
-- * e100net.c: A network driver for the ETRAX 100LX network controller.
-+/*
-+ * Driver for the ETRAX 100LX network controller.
- *
-- * Copyright (c) 1998-2002 Axis Communications AB.
-+ * Copyright (c) 1998-2006 Axis Communications AB.
- *
- * The outline of this driver comes from skeleton.c.
- *
-- * $Log: ethernet.c,v $
-- * Revision 1.31 2004/10/18 14:49:03 starvik
-- * Use RX interrupt as random source
-- *
-- * Revision 1.30 2004/09/29 10:44:04 starvik
-- * Enabed MAC-address output again
-- *
-- * Revision 1.29 2004/08/24 07:14:05 starvik
-- * Make use of generic MDIO interface and constants.
-- *
-- * Revision 1.28 2004/08/20 09:37:11 starvik
-- * Added support for Intel LXT972A. Creds to Randy Scarborough.
-- *
-- * Revision 1.27 2004/08/16 12:37:22 starvik
-- * Merge of Linux 2.6.8
-- *
-- * Revision 1.25 2004/06/21 10:29:57 starvik
-- * Merge of Linux 2.6.7
-- *
-- * Revision 1.23 2004/06/09 05:29:22 starvik
-- * Avoid any race where R_DMA_CH1_FIRST is NULL (may trigger cache bug).
-- *
-- * Revision 1.22 2004/05/14 07:58:03 starvik
-- * Merge of changes from 2.4
-- *
-- * Revision 1.20 2004/03/11 11:38:40 starvik
-- * Merge of Linux 2.6.4
-- *
-- * Revision 1.18 2003/12/03 13:45:46 starvik
-- * Use hardware pad for short packets to prevent information leakage.
-- *
-- * Revision 1.17 2003/07/04 08:27:37 starvik
-- * Merge of Linux 2.5.74
-- *
-- * Revision 1.16 2003/04/24 08:28:22 starvik
-- * New LED behaviour: LED off when no link
-- *
-- * Revision 1.15 2003/04/09 05:20:47 starvik
-- * Merge of Linux 2.5.67
-- *
-- * Revision 1.13 2003/03/06 16:11:01 henriken
-- * Off by one error in group address register setting.
-- *
-- * Revision 1.12 2003/02/27 17:24:19 starvik
-- * Corrected Rev to Revision
-- *
-- * Revision 1.11 2003/01/24 09:53:21 starvik
-- * Oops. Initialize GA to 0, not to 1
-- *
-- * Revision 1.10 2003/01/24 09:50:55 starvik
-- * Initialize GA_0 and GA_1 to 0 to avoid matching of unwanted packets
-- *
-- * Revision 1.9 2002/12/13 07:40:58 starvik
-- * Added basic ethtool interface
-- * Handled out of memory when allocating new buffers
-- *
-- * Revision 1.8 2002/12/11 13:13:57 starvik
-- * Added arch/ to v10 specific includes
-- * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
-- *
-- * Revision 1.7 2002/11/26 09:41:42 starvik
-- * Added e100_set_config (standard interface to set media type)
-- * Added protection against preemptive scheduling
-- * Added standard MII ioctls
-- *
-- * Revision 1.6 2002/11/21 07:18:18 starvik
-- * Timers must be initialized in 2.5.48
-- *
-- * Revision 1.5 2002/11/20 11:56:11 starvik
-- * Merge of Linux 2.5.48
-- *
-- * Revision 1.4 2002/11/18 07:26:46 starvik
-- * Linux 2.5 port of latest Linux 2.4 ethernet driver
-- *
-- * Revision 1.33 2002/10/02 20:16:17 hp
-- * SETF, SETS: Use underscored IO_x_ macros rather than incorrect token concatenation
-- *
-- * Revision 1.32 2002/09/16 06:05:58 starvik
-- * Align memory returned by dev_alloc_skb
-- * Moved handling of sent packets to interrupt to avoid reference counting problem
-- *
-- * Revision 1.31 2002/09/10 13:28:23 larsv
-- * Return -EINVAL for unknown ioctls to avoid confusing tools that tests
-- * for supported functionality by issuing special ioctls, i.e. wireless
-- * extensions.
-- *
-- * Revision 1.30 2002/05/07 18:50:08 johana
-- * Correct spelling in comments.
-- *
-- * Revision 1.29 2002/05/06 05:38:49 starvik
-- * Performance improvements:
-- * Large packets are not copied (breakpoint set to 256 bytes)
-- * The cache bug workaround is delayed until half of the receive list
-- * has been used
-- * Added transmit list
-- * Transmit interrupts are only enabled when transmit queue is full
-- *
-- * Revision 1.28.2.1 2002/04/30 08:15:51 starvik
-- * Performance improvements:
-- * Large packets are not copied (breakpoint set to 256 bytes)
-- * The cache bug workaround is delayed until half of the receive list
-- * has been used.
-- * Added transmit list
-- * Transmit interrupts are only enabled when transmit queue is full
-- *
-- * Revision 1.28 2002/04/22 11:47:21 johana
-- * Fix according to 2.4.19-pre7. time_after/time_before and
-- * missing end of comment.
-- * The patch has a typo for ethernet.c in e100_clear_network_leds(),
-- * that is fixed here.
-- *
-- * Revision 1.27 2002/04/12 11:55:11 bjornw
-- * Added TODO
-- *
-- * Revision 1.26 2002/03/15 17:11:02 bjornw
-- * Use prepare_rx_descriptor after the CPU has touched the receiving descs
-- *
-- * Revision 1.25 2002/03/08 13:07:53 bjornw
-- * Unnecessary spinlock removed
-- *
-- * Revision 1.24 2002/02/20 12:57:43 fredriks
-- * Replaced MIN() with min().
-- *
-- * Revision 1.23 2002/02/20 10:58:14 fredriks
-- * Strip the Ethernet checksum (4 bytes) before forwarding a frame to upper layers.
-- *
-- * Revision 1.22 2002/01/30 07:48:22 matsfg
-- * Initiate R_NETWORK_TR_CTRL
-- *
-- * Revision 1.21 2001/11/23 11:54:49 starvik
-- * Added IFF_PROMISC and IFF_ALLMULTI handling in set_multicast_list
-- * Removed compiler warnings
-- *
-- * Revision 1.20 2001/11/12 19:26:00 pkj
-- * * Corrected e100_negotiate() to not assign half to current_duplex when
-- * it was supposed to compare them...
-- * * Cleaned up failure handling in e100_open().
-- * * Fixed compiler warnings.
-- *
-- * Revision 1.19 2001/11/09 07:43:09 starvik
-- * Added full duplex support
-- * Added ioctl to set speed and duplex
-- * Clear LED timer only runs when LED is lit
-- *
-- * Revision 1.18 2001/10/03 14:40:43 jonashg
-- * Update rx_bytes counter.
-- *
-- * Revision 1.17 2001/06/11 12:43:46 olof
-- * Modified defines for network LED behavior
-- *
-- * Revision 1.16 2001/05/30 06:12:46 markusl
-- * TxDesc.next should not be set to NULL
-- *
-- * Revision 1.15 2001/05/29 10:27:04 markusl
-- * Updated after review remarks:
-- * +Use IO_EXTRACT
-- * +Handle underrun
-- *
-- * Revision 1.14 2001/05/29 09:20:14 jonashg
-- * Use driver name on printk output so one can tell which driver that complains.
-- *
-- * Revision 1.13 2001/05/09 12:35:59 johana
-- * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h
-- *
-- * Revision 1.12 2001/04/05 11:43:11 tobiasa
-- * Check dev before panic.
-- *
-- * Revision 1.11 2001/04/04 11:21:05 markusl
-- * Updated according to review remarks
-- *
-- * Revision 1.10 2001/03/26 16:03:06 bjornw
-- * Needs linux/config.h
-- *
-- * Revision 1.9 2001/03/19 14:47:48 pkj
-- * * Make sure there is always a pause after the network LEDs are
-- * changed so they will not look constantly lit during heavy traffic.
-- * * Always use HZ when setting times relative to jiffies.
-- * * Use LED_NETWORK_SET() when setting the network LEDs.
-- *
-- * Revision 1.8 2001/02/27 13:52:48 bjornw
-- * malloc.h -> slab.h
-- *
-- * Revision 1.7 2001/02/23 13:46:38 bjornw
-- * Spellling check
-- *
-- * Revision 1.6 2001/01/26 15:21:04 starvik
-- * Don't disable interrupts while reading MDIO registers (MDIO is slow)
-- * Corrected promiscuous mode
-- * Improved deallocation of IRQs ("ifconfig eth0 down" now works)
-- *
-- * Revision 1.5 2000/11/29 17:22:22 bjornw
-- * Get rid of the udword types legacy stuff
-- *
-- * Revision 1.4 2000/11/22 16:36:09 bjornw
-- * Please marketing by using the correct case when spelling Etrax.
-- *
-- * Revision 1.3 2000/11/21 16:43:04 bjornw
-- * Minor short->int change
-- *
-- * Revision 1.2 2000/11/08 14:27:57 bjornw
-- * 2.4 port
-- *
-- * Revision 1.1 2000/11/06 13:56:00 bjornw
-- * Verbatim copy of the 1.24 version of e100net.c from elinux
-- *
-- * Revision 1.24 2000/10/04 15:55:23 bjornw
-- * * Use virt_to_phys etc. for DMA addresses
-- * * Removed bogus CHECKSUM_UNNECESSARY
-- *
-- *
- */
-
-
-@@ -251,6 +40,7 @@
- #include <asm/bitops.h>
- #include <asm/ethernet.h>
- #include <asm/cache.h>
-+#include <asm/arch/io_interface_mux.h>
-
- //#define ETHDEBUG
- #define D(x)
-@@ -280,6 +70,9 @@
- * by this lock as well.
- */
- spinlock_t lock;
-+
-+ spinlock_t led_lock; /* Protect LED state */
-+ spinlock_t transceiver_lock; /* Protect transceiver state. */
- };
-
- typedef struct etrax_eth_descr
-@@ -296,8 +89,6 @@
- void (*check_duplex)(struct net_device* dev);
- };
-
--struct transceiver_ops* transceiver;
--
- /* Duplex settings */
- enum duplex
- {
-@@ -308,7 +99,7 @@
-
- /* Dma descriptors etc. */
-
--#define MAX_MEDIA_DATA_SIZE 1518
-+#define MAX_MEDIA_DATA_SIZE 1522
-
- #define MIN_PACKET_LEN 46
- #define ETHER_HEAD_LEN 14
-@@ -332,9 +123,9 @@
- #define MDIO_TDK_DIAGNOSTIC_DPLX 0x800
-
- /*Intel LXT972A specific*/
--#define MDIO_INT_STATUS_REG_2 0x0011
--#define MDIO_INT_FULL_DUPLEX_IND ( 1 << 9 )
--#define MDIO_INT_SPEED ( 1 << 14 )
-+#define MDIO_INT_STATUS_REG_2 0x0011
-+#define MDIO_INT_FULL_DUPLEX_IND (1 << 9)
-+#define MDIO_INT_SPEED (1 << 14)
-
- /* Network flash constants */
- #define NET_FLASH_TIME (HZ/50) /* 20 ms */
-@@ -345,8 +136,8 @@
- #define NO_NETWORK_ACTIVITY 0
- #define NETWORK_ACTIVITY 1
-
--#define NBR_OF_RX_DESC 64
--#define NBR_OF_TX_DESC 256
-+#define NBR_OF_RX_DESC 32
-+#define NBR_OF_TX_DESC 16
-
- /* Large packets are sent directly to upper layers while small packets are */
- /* copied (to reduce memory waste). The following constant decides the breakpoint */
-@@ -368,7 +159,6 @@
- static etrax_eth_descr *myNextRxDesc; /* Points to the next descriptor to
- to be processed */
- static etrax_eth_descr *myLastRxDesc; /* The last processed descriptor */
--static etrax_eth_descr *myPrevRxDesc; /* The descriptor right before myNextRxDesc */
-
- static etrax_eth_descr RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned(32)));
-
-@@ -378,7 +168,6 @@
- static etrax_eth_descr TxDescList[NBR_OF_TX_DESC] __attribute__ ((aligned(32)));
-
- static unsigned int network_rec_config_shadow = 0;
--static unsigned int mdio_phy_addr; /* Transciever address */
-
- static unsigned int network_tr_ctrl_shadow = 0;
-
-@@ -412,7 +201,7 @@
- static void e100_tx_timeout(struct net_device *dev);
- static struct net_device_stats *e100_get_stats(struct net_device *dev);
- static void set_multicast_list(struct net_device *dev);
--static void e100_hardware_send_packet(char *buf, int length);
-+static void e100_hardware_send_packet(struct net_local* np, char *buf, int length);
- static void update_rx_stats(struct net_device_stats *);
- static void update_tx_stats(struct net_device_stats *);
- static int e100_probe_transceiver(struct net_device* dev);
-@@ -435,7 +224,10 @@
- static void e100_set_network_leds(int active);
-
- static const struct ethtool_ops e100_ethtool_ops;
--
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+static void dummy_check_speed(struct net_device* dev);
-+static void dummy_check_duplex(struct net_device* dev);
-+#else
- static void broadcom_check_speed(struct net_device* dev);
- static void broadcom_check_duplex(struct net_device* dev);
- static void tdk_check_speed(struct net_device* dev);
-@@ -444,16 +236,29 @@
- static void intel_check_duplex(struct net_device* dev);
- static void generic_check_speed(struct net_device* dev);
- static void generic_check_duplex(struct net_device* dev);
-+#endif
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void e100_netpoll(struct net_device* dev);
-+#endif
-+
-+static int autoneg_normal = 1;
-
- struct transceiver_ops transceivers[] =
- {
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+ {0x0000, dummy_check_speed, dummy_check_duplex} /* Dummy */
-+#else
- {0x1018, broadcom_check_speed, broadcom_check_duplex}, /* Broadcom */
- {0xC039, tdk_check_speed, tdk_check_duplex}, /* TDK 2120 */
- {0x039C, tdk_check_speed, tdk_check_duplex}, /* TDK 2120C */
-- {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/
-+ {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/
- {0x0000, generic_check_speed, generic_check_duplex} /* Generic, must be last */
-+#endif
- };
-
-+struct transceiver_ops* transceiver = &transceivers[0];
-+static unsigned int mdio_phy_addr = 0; /* PHY address on MDIO bus */
-+
- #define tx_done(dev) (*R_DMA_CH0_CMD == 0)
-
- /*
-@@ -468,18 +273,26 @@
- etrax_ethernet_init(void)
- {
- struct net_device *dev;
-- struct net_local* np;
-+ struct net_local* np;
- int i, err;
-
- printk(KERN_INFO
-- "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2003 Axis Communications AB\n");
--
-+ "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 1998-2006 Axis Communications AB\n");
-+
-+ if (cris_request_io_interface(if_eth, cardname)) {
-+ printk(KERN_CRIT "etrax_ethernet_init failed to get IO interface\n");
-+ return -EBUSY;
-+ }
-+
- dev = alloc_etherdev(sizeof(struct net_local));
-- np = dev->priv;
--
- if (!dev)
- return -ENOMEM;
-+
-+ np = netdev_priv(dev);
-
-+ /* we do our own locking */
-+ dev->features |= NETIF_F_LLTX;
-+
- dev->base_addr = (unsigned int)R_NETWORK_SA_0; /* just to have something to show */
-
- /* now setup our etrax specific stuff */
-@@ -495,18 +308,26 @@
- dev->get_stats = e100_get_stats;
- dev->set_multicast_list = set_multicast_list;
- dev->set_mac_address = e100_set_mac_address;
-- dev->ethtool_ops = &e100_ethtool_ops;
-+ dev->ethtool_ops = &e100_ethtool_ops;
- dev->do_ioctl = e100_ioctl;
-- dev->set_config = e100_set_config;
-+ dev->set_config = e100_set_config;
- dev->tx_timeout = e100_tx_timeout;
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+ dev->poll_controller = e100_netpoll;
-+#endif
-+
-+ spin_lock_init(&np->lock);
-+ spin_lock_init(&np->led_lock);
-+ spin_lock_init(&np->transceiver_lock);
-
- /* Initialise the list of Etrax DMA-descriptors */
-
- /* Initialise receive descriptors */
-
- for (i = 0; i < NBR_OF_RX_DESC; i++) {
-- /* Allocate two extra cachelines to make sure that buffer used by DMA
-- * does not share cacheline with any other data (to avoid cache bug)
-+ /* Allocate two extra cachelines to make sure that buffer used
-+ * by DMA does not share cacheline with any other data (to
-+ * avoid cache bug)
- */
- RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
- if (!RxDescList[i].skb)
-@@ -517,6 +338,7 @@
- RxDescList[i].descr.buf = L1_CACHE_ALIGN(virt_to_phys(RxDescList[i].skb->data));
- RxDescList[i].descr.status = 0;
- RxDescList[i].descr.hw_len = 0;
-+
- prepare_rx_descriptor(&RxDescList[i].descr);
- }
-
-@@ -542,7 +364,6 @@
-
- myNextRxDesc = &RxDescList[0];
- myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
-- myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1];
- myFirstTxDesc = &TxDescList[0];
- myNextTxDesc = &TxDescList[0];
- myLastTxDesc = &TxDescList[NBR_OF_TX_DESC - 1];
-@@ -563,18 +384,19 @@
- current_speed = 10;
- current_speed_selection = 0; /* Auto */
- speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-- duplex_timer.data = (unsigned long)dev;
-+ speed_timer.data = (unsigned long)dev;
- speed_timer.function = e100_check_speed;
-
- clear_led_timer.function = e100_clear_network_leds;
-+ clear_led_timer.data = (unsigned long)dev;
-
- full_duplex = 0;
- current_duplex = autoneg;
- duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-- duplex_timer.data = (unsigned long)dev;
-+ duplex_timer.data = (unsigned long)dev;
- duplex_timer.function = e100_check_duplex;
-
-- /* Initialize mii interface */
-+ /* Initialize mii interface */
- np->mii_if.phy_id = mdio_phy_addr;
- np->mii_if.phy_id_mask = 0x1f;
- np->mii_if.reg_num_mask = 0x1f;
-@@ -586,6 +408,9 @@
- /* unwanted addresses are matched */
- *R_NETWORK_GA_0 = 0x00000000;
- *R_NETWORK_GA_1 = 0x00000000;
-+
-+ /* Initialize next time the led can flash */
-+ led_next_time = jiffies;
- return 0;
- }
-
-@@ -596,7 +421,7 @@
- static int
- e100_set_mac_address(struct net_device *dev, void *p)
- {
-- struct net_local *np = (struct net_local *)dev->priv;
-+ struct net_local *np = netdev_priv(dev);
- struct sockaddr *addr = p;
- int i;
-
-@@ -680,17 +505,36 @@
- /* allocate the irq corresponding to the transmitting DMA */
-
- if (request_irq(NETWORK_DMA_TX_IRQ_NBR, e100rxtx_interrupt, 0,
-- cardname, (void *)dev)) {
-+ cardname, (void *)dev)) {
- goto grace_exit1;
- }
-
- /* allocate the irq corresponding to the network errors etc */
-
- if (request_irq(NETWORK_STATUS_IRQ_NBR, e100nw_interrupt, 0,
-- cardname, (void *)dev)) {
-+ cardname, (void *)dev)) {
- goto grace_exit2;
- }
-
-+ /*
-+ * Always allocate the DMA channels after the IRQ,
-+ * and clean up on failure.
-+ */
-+
-+ if (cris_request_dma(NETWORK_TX_DMA_NBR,
-+ cardname,
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_eth)) {
-+ goto grace_exit3;
-+ }
-+
-+ if (cris_request_dma(NETWORK_RX_DMA_NBR,
-+ cardname,
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_eth)) {
-+ goto grace_exit4;
-+ }
-+
- /* give the HW an idea of what MAC address we want */
-
- *R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) |
-@@ -705,6 +549,7 @@
-
- *R_NETWORK_REC_CONFIG = 0xd; /* broadcast rec, individ. rec, ma0 enabled */
- #else
-+ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, max_size, size1522);
- SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, broadcast, receive);
- SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, ma0, enable);
- SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex);
-@@ -724,8 +569,7 @@
- SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, crc, enable);
- *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
-
-- save_flags(flags);
-- cli();
-+ local_irq_save(flags);
-
- /* enable the irq's for ethernet DMA */
-
-@@ -757,12 +601,13 @@
-
- *R_DMA_CH0_FIRST = 0;
- *R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc);
-+ netif_start_queue(dev);
-
-- restore_flags(flags);
-+ local_irq_restore(flags);
-
- /* Probe for transceiver */
- if (e100_probe_transceiver(dev))
-- goto grace_exit3;
-+ goto grace_exit5;
-
- /* Start duplex/speed timers */
- add_timer(&speed_timer);
-@@ -771,10 +616,14 @@
- /* We are now ready to accept transmit requeusts from
- * the queueing layer of the networking.
- */
-- netif_start_queue(dev);
-+ netif_carrier_on(dev);
-
- return 0;
-
-+grace_exit5:
-+ cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
-+grace_exit4:
-+ cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
- grace_exit3:
- free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
- grace_exit2:
-@@ -785,7 +634,13 @@
- return -EAGAIN;
- }
-
--
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+static void
-+dummy_check_speed(struct net_device* dev)
-+{
-+ current_speed = 100;
-+}
-+#else
- static void
- generic_check_speed(struct net_device* dev)
- {
-@@ -821,15 +676,18 @@
- data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2);
- current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
- }
--
-+#endif
- static void
- e100_check_speed(unsigned long priv)
- {
- struct net_device* dev = (struct net_device*)priv;
-+ struct net_local *np = netdev_priv(dev);
- static int led_initiated = 0;
- unsigned long data;
- int old_speed = current_speed;
-
-+ spin_lock(&np->transceiver_lock);
-+
- data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR);
- if (!(data & BMSR_LSTATUS)) {
- current_speed = 0;
-@@ -837,14 +695,22 @@
- transceiver->check_speed(dev);
- }
-
-+ spin_lock(&np->led_lock);
- if ((old_speed != current_speed) || !led_initiated) {
- led_initiated = 1;
- e100_set_network_leds(NO_NETWORK_ACTIVITY);
-+ if (current_speed)
-+ netif_carrier_on(dev);
-+ else
-+ netif_carrier_off(dev);
- }
-+ spin_unlock(&np->led_lock);
-
- /* Reinitialize the timer. */
- speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
- add_timer(&speed_timer);
-+
-+ spin_unlock(&np->transceiver_lock);
- }
-
- static void
-@@ -857,7 +723,7 @@
- ADVERTISE_10HALF | ADVERTISE_10FULL);
-
- switch (current_speed_selection) {
-- case 10 :
-+ case 10:
- if (current_duplex == full)
- data |= ADVERTISE_10FULL;
- else if (current_duplex == half)
-@@ -866,7 +732,7 @@
- data |= ADVERTISE_10HALF | ADVERTISE_10FULL;
- break;
-
-- case 100 :
-+ case 100:
- if (current_duplex == full)
- data |= ADVERTISE_100FULL;
- else if (current_duplex == half)
-@@ -875,45 +741,54 @@
- data |= ADVERTISE_100HALF | ADVERTISE_100FULL;
- break;
-
-- case 0 : /* Auto */
-+ case 0: /* Auto */
- if (current_duplex == full)
- data |= ADVERTISE_100FULL | ADVERTISE_10FULL;
- else if (current_duplex == half)
- data |= ADVERTISE_100HALF | ADVERTISE_10HALF;
- else
- data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
-- ADVERTISE_100HALF | ADVERTISE_100FULL;
-+ ADVERTISE_100HALF | ADVERTISE_100FULL;
- break;
-
-- default : /* assume autoneg speed and duplex */
-+ default: /* assume autoneg speed and duplex */
- data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
-- ADVERTISE_100HALF | ADVERTISE_100FULL;
-+ ADVERTISE_100HALF | ADVERTISE_100FULL;
-+ break;
- }
-
- e100_set_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE, data);
-
- /* Renegotiate with link partner */
-- data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR);
-- data |= BMCR_ANENABLE | BMCR_ANRESTART;
--
-+ if (autoneg_normal) {
-+ data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR);
-+ data |= BMCR_ANENABLE | BMCR_ANRESTART;
-+ }
- e100_set_mdio_reg(dev, mdio_phy_addr, MII_BMCR, data);
- }
-
- static void
- e100_set_speed(struct net_device* dev, unsigned long speed)
- {
-+ struct net_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->transceiver_lock);
- if (speed != current_speed_selection) {
- current_speed_selection = speed;
- e100_negotiate(dev);
- }
-+ spin_unlock(&np->transceiver_lock);
- }
-
- static void
- e100_check_duplex(unsigned long priv)
- {
- struct net_device *dev = (struct net_device *)priv;
-- struct net_local *np = (struct net_local *)dev->priv;
-- int old_duplex = full_duplex;
-+ struct net_local *np = netdev_priv(dev);
-+ int old_duplex;
-+
-+ spin_lock(&np->transceiver_lock);
-+ old_duplex = full_duplex;
- transceiver->check_duplex(dev);
- if (old_duplex != full_duplex) {
- /* Duplex changed */
-@@ -925,12 +800,20 @@
- duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
- add_timer(&duplex_timer);
- np->mii_if.full_duplex = full_duplex;
-+ spin_unlock(&np->transceiver_lock);
- }
--
-+#if defined(CONFIG_ETRAX_NO_PHY)
-+static void
-+dummy_check_duplex(struct net_device* dev)
-+{
-+ full_duplex = 1;
-+}
-+#else
- static void
- generic_check_duplex(struct net_device* dev)
- {
- unsigned long data;
-+
- data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE);
- if ((data & ADVERTISE_10FULL) ||
- (data & ADVERTISE_100FULL))
-@@ -943,6 +826,7 @@
- tdk_check_duplex(struct net_device* dev)
- {
- unsigned long data;
-+
- data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_TDK_DIAGNOSTIC_REG);
- full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
- }
-@@ -951,6 +835,7 @@
- broadcom_check_duplex(struct net_device* dev)
- {
- unsigned long data;
-+
- data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_AUX_CTRL_STATUS_REG);
- full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
- }
-@@ -959,26 +844,35 @@
- intel_check_duplex(struct net_device* dev)
- {
- unsigned long data;
-+
- data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2);
- full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
- }
--
-+#endif
- static void
- e100_set_duplex(struct net_device* dev, enum duplex new_duplex)
- {
-+ struct net_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->transceiver_lock);
- if (new_duplex != current_duplex) {
- current_duplex = new_duplex;
- e100_negotiate(dev);
- }
-+ spin_unlock(&np->transceiver_lock);
- }
-
- static int
- e100_probe_transceiver(struct net_device* dev)
- {
-+#if !defined(CONFIG_ETRAX_NO_PHY)
- unsigned int phyid_high;
- unsigned int phyid_low;
- unsigned int oui;
- struct transceiver_ops* ops = NULL;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->transceiver_lock);
-
- /* Probe MDIO physical address */
- for (mdio_phy_addr = 0; mdio_phy_addr <= 31; mdio_phy_addr++) {
-@@ -986,7 +880,7 @@
- break;
- }
- if (mdio_phy_addr == 32)
-- return -ENODEV;
-+ return -ENODEV;
-
- /* Get manufacturer */
- phyid_high = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID1);
-@@ -999,6 +893,8 @@
- }
- transceiver = ops;
-
-+ spin_unlock(&np->transceiver_lock);
-+#endif
- return 0;
- }
-
-@@ -1006,7 +902,7 @@
- e100_get_mdio_reg(struct net_device *dev, int phy_id, int location)
- {
- unsigned short cmd; /* Data to be sent on MDIO port */
-- int data; /* Data read from MDIO */
-+ int data; /* Data read from MDIO */
- int bitCounter;
-
- /* Start of frame, OP Code, Physical Address, Register Address */
-@@ -1082,6 +978,7 @@
- e100_receive_mdio_bit()
- {
- unsigned char bit;
-+
- *R_NETWORK_MGM_CTRL = 0;
- bit = IO_EXTRACT(R_NETWORK_STAT, mdio, *R_NETWORK_STAT);
- udelay(1);
-@@ -1117,7 +1014,7 @@
- static void
- e100_tx_timeout(struct net_device *dev)
- {
-- struct net_local *np = (struct net_local *)dev->priv;
-+ struct net_local *np = netdev_priv(dev);
- unsigned long flags;
-
- spin_lock_irqsave(&np->lock, flags);
-@@ -1139,8 +1036,7 @@
- e100_reset_transceiver(dev);
-
- /* and get rid of the packets that never got an interrupt */
-- while (myFirstTxDesc != myNextTxDesc)
-- {
-+ while (myFirstTxDesc != myNextTxDesc) {
- dev_kfree_skb(myFirstTxDesc->skb);
- myFirstTxDesc->skb = 0;
- myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
-@@ -1166,7 +1062,7 @@
- static int
- e100_send_packet(struct sk_buff *skb, struct net_device *dev)
- {
-- struct net_local *np = (struct net_local *)dev->priv;
-+ struct net_local *np = netdev_priv(dev);
- unsigned char *buf = skb->data;
- unsigned long flags;
-
-@@ -1179,7 +1075,7 @@
-
- dev->trans_start = jiffies;
-
-- e100_hardware_send_packet(buf, skb->len);
-+ e100_hardware_send_packet(np, buf, skb->len);
-
- myNextTxDesc = phys_to_virt(myNextTxDesc->descr.next);
-
-@@ -1202,13 +1098,15 @@
- e100rxtx_interrupt(int irq, void *dev_id)
- {
- struct net_device *dev = (struct net_device *)dev_id;
-- struct net_local *np = (struct net_local *)dev->priv;
-- unsigned long irqbits = *R_IRQ_MASK2_RD;
-+ struct net_local *np = netdev_priv(dev);
-+ unsigned long irqbits;
-
-- /* Disable RX/TX IRQs to avoid reentrancy */
-- *R_IRQ_MASK2_CLR =
-- IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) |
-- IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr);
-+ /*
-+ * Note that both rx and tx interrupts are blocked at this point,
-+ * regardless of which got us here.
-+ */
-+
-+ irqbits = *R_IRQ_MASK2_RD;
-
- /* Handle received packets */
- if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma1_eop, active)) {
-@@ -1224,7 +1122,7 @@
- * allocate a new buffer to put a packet in.
- */
- e100_rx(dev);
-- ((struct net_local *)dev->priv)->stats.rx_packets++;
-+ np->stats.rx_packets++;
- /* restart/continue on the channel, for safety */
- *R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart);
- /* clear dma channel 1 eop/descr irq bits */
-@@ -1239,8 +1137,7 @@
-
- /* Report any packets that have been sent */
- while (myFirstTxDesc != phys_to_virt(*R_DMA_CH0_FIRST) &&
-- myFirstTxDesc != myNextTxDesc)
-- {
-+ (netif_queue_stopped(dev) || myFirstTxDesc != myNextTxDesc)) {
- np->stats.tx_bytes += myFirstTxDesc->skb->len;
- np->stats.tx_packets++;
-
-@@ -1249,19 +1146,15 @@
- dev_kfree_skb_irq(myFirstTxDesc->skb);
- myFirstTxDesc->skb = 0;
- myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next);
-+ /* Wake up queue. */
-+ netif_wake_queue(dev);
- }
-
- if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) {
-- /* acknowledge the eop interrupt and wake up queue */
-+ /* acknowledge the eop interrupt. */
- *R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do);
-- netif_wake_queue(dev);
- }
-
-- /* Enable RX/TX IRQs again */
-- *R_IRQ_MASK2_SET =
-- IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) |
-- IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set);
--
- return IRQ_HANDLED;
- }
-
-@@ -1269,7 +1162,7 @@
- e100nw_interrupt(int irq, void *dev_id)
- {
- struct net_device *dev = (struct net_device *)dev_id;
-- struct net_local *np = (struct net_local *)dev->priv;
-+ struct net_local *np = netdev_priv(dev);
- unsigned long irqbits = *R_IRQ_MASK0_RD;
-
- /* check for underrun irq */
-@@ -1291,7 +1184,6 @@
- SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
- *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
- SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
-- *R_NETWORK_TR_CTRL = IO_STATE(R_NETWORK_TR_CTRL, clr_error, clr);
- np->stats.tx_errors++;
- D(printk("ethernet excessive collisions!\n"));
- }
-@@ -1304,12 +1196,13 @@
- {
- struct sk_buff *skb;
- int length = 0;
-- struct net_local *np = (struct net_local *)dev->priv;
-+ struct net_local *np = netdev_priv(dev);
- unsigned char *skb_data_ptr;
- #ifdef ETHDEBUG
- int i;
- #endif
--
-+ etrax_eth_descr *prevRxDesc; /* The descriptor right before myNextRxDesc */
-+ spin_lock(&np->led_lock);
- if (!led_active && time_after(jiffies, led_next_time)) {
- /* light the network leds depending on the current speed. */
- e100_set_network_leds(NETWORK_ACTIVITY);
-@@ -1319,9 +1212,10 @@
- led_active = 1;
- mod_timer(&clear_led_timer, jiffies + HZ/10);
- }
-+ spin_unlock(&np->led_lock);
-
- length = myNextRxDesc->descr.hw_len - 4;
-- ((struct net_local *)dev->priv)->stats.rx_bytes += length;
-+ np->stats.rx_bytes += length;
-
- #ifdef ETHDEBUG
- printk("Got a packet of length %d:\n", length);
-@@ -1341,7 +1235,7 @@
- if (!skb) {
- np->stats.rx_errors++;
- printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-- return;
-+ goto update_nextrxdesc;
- }
-
- skb_put(skb, length - ETHER_HEAD_LEN); /* allocate room for the packet body */
-@@ -1358,15 +1252,15 @@
- else {
- /* Large packet, send directly to upper layers and allocate new
- * memory (aligned to cache line boundary to avoid bug).
-- * Before sending the skb to upper layers we must make sure that
-- * skb->data points to the aligned start of the packet.
-+ * Before sending the skb to upper layers we must make sure
-+ * that skb->data points to the aligned start of the packet.
- */
- int align;
- struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
- if (!new_skb) {
- np->stats.rx_errors++;
- printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
-- return;
-+ goto update_nextrxdesc;
- }
- skb = myNextRxDesc->skb;
- align = (int)phys_to_virt(myNextRxDesc->descr.buf) - (int)skb->data;
-@@ -1382,9 +1276,10 @@
- /* Send the packet to the upper layers */
- netif_rx(skb);
-
-+ update_nextrxdesc:
- /* Prepare for next packet */
- myNextRxDesc->descr.status = 0;
-- myPrevRxDesc = myNextRxDesc;
-+ prevRxDesc = myNextRxDesc;
- myNextRxDesc = phys_to_virt(myNextRxDesc->descr.next);
-
- rx_queue_len++;
-@@ -1392,9 +1287,9 @@
- /* Check if descriptors should be returned */
- if (rx_queue_len == RX_QUEUE_THRESHOLD) {
- flush_etrax_cache();
-- myPrevRxDesc->descr.ctrl |= d_eol;
-+ prevRxDesc->descr.ctrl |= d_eol;
- myLastRxDesc->descr.ctrl &= ~d_eol;
-- myLastRxDesc = myPrevRxDesc;
-+ myLastRxDesc = prevRxDesc;
- rx_queue_len = 0;
- }
- }
-@@ -1403,7 +1298,7 @@
- static int
- e100_close(struct net_device *dev)
- {
-- struct net_local *np = (struct net_local *)dev->priv;
-+ struct net_local *np = netdev_priv(dev);
-
- printk(KERN_INFO "Closing %s.\n", dev->name);
-
-@@ -1431,6 +1326,9 @@
- free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev);
- free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev);
-
-+ cris_free_dma(NETWORK_TX_DMA_NBR, cardname);
-+ cris_free_dma(NETWORK_RX_DMA_NBR, cardname);
-+
- /* Update the statistics here. */
-
- update_rx_stats(&np->stats);
-@@ -1448,46 +1346,56 @@
- {
- struct mii_ioctl_data *data = if_mii(ifr);
- struct net_local *np = netdev_priv(dev);
-+ int ret = 0;
-+ int old_autoneg;
-
- spin_lock(&np->lock); /* Preempt protection */
- switch (cmd) {
-- case SIOCGMIIPHY: /* Get PHY address */
-+ case SIOCGMIIPHY: /* Get PHY address */
- data->phy_id = mdio_phy_addr;
- break;
-- case SIOCGMIIREG: /* Read MII register */
-+ case SIOCGMIIREG: /* Read MII register */
- data->val_out = e100_get_mdio_reg(dev, mdio_phy_addr, data->reg_num);
- break;
-- case SIOCSMIIREG: /* Write MII register */
-+ case SIOCSMIIREG: /* Write MII register */
- e100_set_mdio_reg(dev, mdio_phy_addr, data->reg_num, data->val_in);
- break;
-+
- /* The ioctls below should be considered obsolete but are */
- /* still present for compatability with old scripts/apps */
-- case SET_ETH_SPEED_10: /* 10 Mbps */
-+ case SET_ETH_SPEED_10: /* 10 Mbps */
- e100_set_speed(dev, 10);
- break;
-- case SET_ETH_SPEED_100: /* 100 Mbps */
-+ case SET_ETH_SPEED_100: /* 100 Mbps */
- e100_set_speed(dev, 100);
- break;
-- case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */
-+ case SET_ETH_SPEED_AUTO: /* Auto-negotiate speed */
- e100_set_speed(dev, 0);
- break;
-- case SET_ETH_DUPLEX_HALF: /* Half duplex. */
-+ case SET_ETH_DUPLEX_HALF: /* Half duplex */
- e100_set_duplex(dev, half);
- break;
-- case SET_ETH_DUPLEX_FULL: /* Full duplex. */
-+ case SET_ETH_DUPLEX_FULL: /* Full duplex */
- e100_set_duplex(dev, full);
- break;
-- case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex*/
-+ case SET_ETH_DUPLEX_AUTO: /* Auto-negotiate duplex */
- e100_set_duplex(dev, autoneg);
- break;
-+ case SET_ETH_AUTONEG:
-+ old_autoneg = autoneg_normal;
-+ autoneg_normal = *(int*)data;
-+ if (autoneg_normal != old_autoneg)
-+ e100_negotiate(dev);
-+ break;
- default:
-+ spin_unlock(&np->lock);
- return -EINVAL;
- }
- spin_unlock(&np->lock);
-- return 0;
-+ return ret;
- }
-
--static int e100_set_settings(struct net_device *dev,
-+static int e100_get_settings(struct net_device *dev,
- struct ethtool_cmd *ecmd)
- {
- ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
-@@ -1565,7 +1473,8 @@
- static int
- e100_set_config(struct net_device *dev, struct ifmap *map)
- {
-- struct net_local *np = (struct net_local *)dev->priv;
-+ struct net_local *np = netdev_priv(dev);
-+
- spin_lock(&np->lock); /* Preempt protection */
-
- switch(map->port) {
-@@ -1574,21 +1483,25 @@
- e100_set_speed(dev, 0);
- e100_set_duplex(dev, autoneg);
- break;
-+
- case IF_PORT_10BASET:
- e100_set_speed(dev, 10);
- e100_set_duplex(dev, autoneg);
- break;
-+
- case IF_PORT_100BASET:
- case IF_PORT_100BASETX:
- e100_set_speed(dev, 100);
- e100_set_duplex(dev, autoneg);
- break;
-+
- case IF_PORT_100BASEFX:
- case IF_PORT_10BASE2:
- case IF_PORT_AUI:
- spin_unlock(&np->lock);
- return -EOPNOTSUPP;
- break;
-+
- default:
- printk(KERN_ERR "%s: Invalid media selected", dev->name);
- spin_unlock(&np->lock);
-@@ -1602,6 +1515,7 @@
- update_rx_stats(struct net_device_stats *es)
- {
- unsigned long r = *R_REC_COUNTERS;
-+
- /* update stats relevant to reception errors */
- es->rx_fifo_errors += IO_EXTRACT(R_REC_COUNTERS, congestion, r);
- es->rx_crc_errors += IO_EXTRACT(R_REC_COUNTERS, crc_error, r);
-@@ -1613,11 +1527,11 @@
- update_tx_stats(struct net_device_stats *es)
- {
- unsigned long r = *R_TR_COUNTERS;
-+
- /* update stats relevant to transmission errors */
- es->collisions +=
- IO_EXTRACT(R_TR_COUNTERS, single_col, r) +
- IO_EXTRACT(R_TR_COUNTERS, multiple_col, r);
-- es->tx_errors += IO_EXTRACT(R_TR_COUNTERS, deferred, r);
- }
-
- /*
-@@ -1627,8 +1541,9 @@
- static struct net_device_stats *
- e100_get_stats(struct net_device *dev)
- {
-- struct net_local *lp = (struct net_local *)dev->priv;
-+ struct net_local *lp = netdev_priv(dev);
- unsigned long flags;
-+
- spin_lock_irqsave(&lp->lock, flags);
-
- update_rx_stats(&lp->stats);
-@@ -1640,21 +1555,21 @@
-
- /*
- * Set or clear the multicast filter for this adaptor.
-- * num_addrs == -1 Promiscuous mode, receive all packets
-- * num_addrs == 0 Normal mode, clear multicast list
-- * num_addrs > 0 Multicast mode, receive normal and MC packets,
-- * and do best-effort filtering.
-+ * num_addrs == -1 Promiscuous mode, receive all packets
-+ * num_addrs == 0 Normal mode, clear multicast list
-+ * num_addrs > 0 Multicast mode, receive normal and MC packets,
-+ * and do best-effort filtering.
- */
- static void
- set_multicast_list(struct net_device *dev)
- {
-- struct net_local *lp = (struct net_local *)dev->priv;
-+ struct net_local *lp = netdev_priv(dev);
- int num_addr = dev->mc_count;
- unsigned long int lo_bits;
- unsigned long int hi_bits;
-+
- spin_lock(&lp->lock);
-- if (dev->flags & IFF_PROMISC)
-- {
-+ if (dev->flags & IFF_PROMISC) {
- /* promiscuous mode */
- lo_bits = 0xfffffffful;
- hi_bits = 0xfffffffful;
-@@ -1684,9 +1599,10 @@
- struct dev_mc_list *dmi = dev->mc_list;
- int i;
- char *baddr;
-+
- lo_bits = 0x00000000ul;
- hi_bits = 0x00000000ul;
-- for (i=0; i<num_addr; i++) {
-+ for (i = 0; i < num_addr; i++) {
- /* Calculate the hash index for the GA registers */
-
- hash_ix = 0;
-@@ -1713,8 +1629,7 @@
-
- if (hash_ix >= 32) {
- hi_bits |= (1 << (hash_ix-32));
-- }
-- else {
-+ } else {
- lo_bits |= (1 << hash_ix);
- }
- dmi = dmi->next;
-@@ -1729,10 +1644,11 @@
- }
-
- void
--e100_hardware_send_packet(char *buf, int length)
-+e100_hardware_send_packet(struct net_local *np, char *buf, int length)
- {
- D(printk("e100 send pack, buf 0x%x len %d\n", buf, length));
-
-+ spin_lock(&np->led_lock);
- if (!led_active && time_after(jiffies, led_next_time)) {
- /* light the network leds depending on the current speed. */
- e100_set_network_leds(NETWORK_ACTIVITY);
-@@ -1742,15 +1658,16 @@
- led_active = 1;
- mod_timer(&clear_led_timer, jiffies + HZ/10);
- }
-+ spin_unlock(&np->led_lock);
-
- /* configure the tx dma descriptor */
- myNextTxDesc->descr.sw_len = length;
- myNextTxDesc->descr.ctrl = d_eop | d_eol | d_wait;
- myNextTxDesc->descr.buf = virt_to_phys(buf);
-
-- /* Move end of list */
-- myLastTxDesc->descr.ctrl &= ~d_eol;
-- myLastTxDesc = myNextTxDesc;
-+ /* Move end of list */
-+ myLastTxDesc->descr.ctrl &= ~d_eol;
-+ myLastTxDesc = myNextTxDesc;
-
- /* Restart DMA channel */
- *R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, restart);
-@@ -1759,6 +1676,11 @@
- static void
- e100_clear_network_leds(unsigned long dummy)
- {
-+ struct net_device *dev = (struct net_device *)dummy;
-+ struct net_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->led_lock);
-+
- if (led_active && time_after(jiffies, led_next_time)) {
- e100_set_network_leds(NO_NETWORK_ACTIVITY);
-
-@@ -1766,6 +1688,8 @@
- led_next_time = jiffies + NET_FLASH_PAUSE;
- led_active = 0;
- }
-+
-+ spin_unlock(&np->led_lock);
- }
-
- static void
-@@ -1786,19 +1710,25 @@
- #else
- LED_NETWORK_SET(LED_OFF);
- #endif
-- }
-- else if (light_leds) {
-+ } else if (light_leds) {
- if (current_speed == 10) {
- LED_NETWORK_SET(LED_ORANGE);
- } else {
- LED_NETWORK_SET(LED_GREEN);
- }
-- }
-- else {
-+ } else {
- LED_NETWORK_SET(LED_OFF);
- }
- }
-
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void
-+e100_netpoll(struct net_device* netdev)
-+{
-+ e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL);
-+}
-+#endif
-+
- static int
- etrax_init_module(void)
- {
-diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v32.c linux-2.6.19.2.dev/drivers/net/cris/eth_v32.c
---- linux-2.6.19.2.orig/drivers/net/cris/eth_v32.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/net/cris/eth_v32.c 2007-02-06 11:10:37.000000000 +0100
-@@ -0,0 +1,2305 @@
-+/*
-+ * Driver for the ETRAX FS network controller.
-+ *
-+ * Copyright (c) 2003-2006 Axis Communications AB.
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/delay.h>
-+#include <linux/types.h>
-+#include <linux/fcntl.h>
-+#include <linux/interrupt.h>
-+#include <linux/ptrace.h>
-+#include <linux/ioport.h>
-+#include <linux/in.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+#include <linux/spinlock.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/cpufreq.h>
-+
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/skbuff.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+
-+#include <asm/io.h> /* LED_* I/O functions */
-+#include <asm/irq.h>
-+#include <asm/arch/hwregs/reg_map.h>
-+#include <asm/arch/hwregs/reg_rdwr.h>
-+#include <asm/arch/hwregs/dma.h>
-+#include <asm/arch/hwregs/eth_defs.h>
-+#include <asm/arch/hwregs/config_defs.h>
-+#include <asm/arch/hwregs/intr_vect_defs.h>
-+#include <asm/system.h>
-+#include <asm/bitops.h>
-+#include <asm/ethernet.h>
-+#include <asm/arch/dma.h>
-+#include <asm/arch/intmem.h>
-+#include <asm/arch/pinmux.h>
-+
-+#include "eth_v32.h"
-+
-+#define DEBUG(x)
-+#define GET_BIT(bit,val) (((val) >> (bit)) & 0x01)
-+
-+/* Toggle network LEDs on/off at runtime */
-+static int use_network_leds = 1;
-+
-+static void update_rx_stats(struct crisv32_ethernet_local *np);
-+static void update_tx_stats(struct crisv32_ethernet_local *np);
-+static void crisv32_eth_setup_controller(struct net_device *dev);
-+static int crisv32_eth_request_irqdma(struct net_device *dev);
-+static void crisv32_eth_init_rings(struct net_device *dev);
-+static void crisv32_eth_reset_rings(struct net_device *dev);
-+static void crisv32_ethernet_bug(struct net_device *dev);
-+
-+/*
-+ * The name of the card. Is used for messages and in the requests for
-+ * io regions, irqs and dma channels.
-+ */
-+static const char *cardname = "ETRAX FS built-in ethernet controller";
-+
-+static int autoneg_normal = 1;
-+
-+/* Some chipset needs special care. */
-+struct transceiver_ops transceivers[] = {
-+ {0x1018, broadcom_check_speed, broadcom_check_duplex},
-+ /* TDK 2120 and TDK 2120C */
-+ {0xC039, tdk_check_speed, tdk_check_duplex},
-+ {0x039C, tdk_check_speed, tdk_check_duplex},
-+ /* Intel LXT972A*/
-+ {0x04de, intel_check_speed, intel_check_duplex},
-+ /* National Semiconductor DP83865 */
-+ {0x0017, national_check_speed, national_check_duplex},
-+ /* Generic, must be last. */
-+ {0x0000, generic_check_speed, generic_check_duplex}
-+};
-+
-+static struct net_device *crisv32_dev[2];
-+static struct crisv32_eth_leds *crisv32_leds[3];
-+
-+#ifdef CONFIG_CPU_FREQ
-+static int
-+crisv32_ethernet_freq_notifier(struct notifier_block *nb, unsigned long val,
-+ void *data);
-+
-+static struct notifier_block crisv32_ethernet_freq_notifier_block = {
-+ .notifier_call = crisv32_ethernet_freq_notifier
-+};
-+#endif
-+
-+/*
-+ * mask in and out tx/rx interrupts.
-+ */
-+static inline void crisv32_disable_tx_ints(struct crisv32_ethernet_local *np)
-+{
-+ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_no };
-+ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx);
-+}
-+
-+static inline void crisv32_enable_tx_ints(struct crisv32_ethernet_local *np)
-+{
-+ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_yes };
-+ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx);
-+}
-+
-+static inline void crisv32_disable_rx_ints(struct crisv32_ethernet_local *np)
-+{
-+ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_no };
-+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx);
-+}
-+
-+static inline void crisv32_enable_rx_ints(struct crisv32_ethernet_local *np)
-+{
-+ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_yes };
-+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx);
-+}
-+
-+/* start/stop receiver */
-+static inline void crisv32_start_receiver(struct crisv32_ethernet_local *np)
-+{
-+ reg_eth_rw_rec_ctrl rec_ctrl;
-+
-+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.ma0 = regk_eth_yes;
-+ rec_ctrl.broadcast = regk_eth_rec;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+}
-+
-+static inline void crisv32_stop_receiver(struct crisv32_ethernet_local *np)
-+{
-+ reg_eth_rw_rec_ctrl rec_ctrl;
-+
-+ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.ma0 = regk_eth_no;
-+ rec_ctrl.broadcast = regk_eth_discard;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+}
-+
-+static int __init
-+crisv32_eth_request_irqdma(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* Allocate IRQs and DMAs. */
-+ if (np->eth_inst == regi_eth0) {
-+ if (request_irq(DMA0_INTR_VECT, crisv32tx_eth_interrupt,
-+ 0, cardname, dev)) {
-+ return -EAGAIN;
-+ }
-+
-+ if (request_irq(DMA1_INTR_VECT, crisv32rx_eth_interrupt,
-+ IRQF_SAMPLE_RANDOM, cardname, dev)) {
-+ goto err0_1;
-+ }
-+
-+ if (crisv32_request_dma(0, cardname, DMA_VERBOSE_ON_ERROR,
-+ 12500000, dma_eth0))
-+ goto err0_2;
-+
-+ if (crisv32_request_dma(1, cardname, DMA_VERBOSE_ON_ERROR,
-+ 12500000, dma_eth0))
-+ goto err0_3;
-+
-+ if (request_irq(ETH0_INTR_VECT, crisv32nw_eth_interrupt, 0,
-+ cardname, dev)) {
-+ crisv32_free_dma(1);
-+ err0_3:
-+ crisv32_free_dma(0);
-+ err0_2:
-+ free_irq(DMA1_INTR_VECT, dev);
-+ err0_1:
-+ free_irq(DMA0_INTR_VECT, dev);
-+ return -EAGAIN;
-+ }
-+ } else {
-+ if (request_irq(DMA6_INTR_VECT, crisv32tx_eth_interrupt,
-+ 0, cardname, dev))
-+ return -EAGAIN;
-+
-+ if (request_irq(DMA7_INTR_VECT, crisv32rx_eth_interrupt,
-+ IRQF_SAMPLE_RANDOM, cardname, dev))
-+ goto err1_1;
-+
-+ if (crisv32_request_dma(6, cardname, DMA_VERBOSE_ON_ERROR,
-+ 0, dma_eth1))
-+ goto err1_2;
-+
-+ if (crisv32_request_dma(7, cardname, DMA_VERBOSE_ON_ERROR,
-+ 0, dma_eth1))
-+ goto err1_3;
-+
-+ if (request_irq(ETH1_INTR_VECT, crisv32nw_eth_interrupt, 0,
-+ cardname, dev)) {
-+ crisv32_free_dma(7);
-+ err1_3:
-+ crisv32_free_dma(6);
-+ err1_2:
-+ free_irq(DMA7_INTR_VECT, dev);
-+ err1_1:
-+ free_irq(DMA6_INTR_VECT, dev);
-+ return -EAGAIN;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static void __init
-+crisv32_eth_setup_controller(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ reg_config_rw_pad_ctrl pad_ctrl;
-+
-+ reg_eth_rw_tr_ctrl tr_ctrl = {
-+ .retry = regk_eth_yes,
-+ .pad = regk_eth_yes,
-+ .crc = regk_eth_yes
-+ };
-+
-+ reg_eth_rw_rec_ctrl rec_ctrl = {
-+ .ma0 = regk_eth_no, /* enable at open() */
-+ .broadcast = regk_eth_no,
-+ .max_size = regk_eth_size1522
-+ };
-+
-+ reg_eth_rw_ga_lo ga_lo = { 0 };
-+ reg_eth_rw_ga_hi ga_hi = { 0 };
-+
-+ reg_eth_rw_gen_ctrl gen_ctrl = {
-+ .phy = regk_eth_mii_clk,
-+ .flow_ctrl = regk_eth_yes
-+ };
-+
-+ /*
-+ * Initialize group address registers to make sure that no
-+ * unwanted addresses are matched.
-+ */
-+ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo);
-+ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi);
-+
-+ /* Configure receiver and transmitter */
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl);
-+
-+ /* Enable ethernet controller with mii clk. */
-+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+ gen_ctrl.en = regk_eth_yes;
-+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+
-+ /* keep reset low (RESET_LEN) */
-+ udelay(500);
-+
-+ /* done */
-+ pad_ctrl = REG_RD(config, regi_config, rw_pad_ctrl);
-+ pad_ctrl.phyrst_n = 1;
-+ REG_WR(config, regi_config, rw_pad_ctrl, pad_ctrl);
-+
-+ /* Let the PHY reset (RESET_WAIT) */
-+ udelay(200);
-+
-+ crisv32_eth_probe_transceiver(dev);
-+}
-+
-+static void __init
-+crisv32_eth_init_rings(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ int i;
-+
-+ /* Initialise receive descriptors for interface. */
-+ for (i = 0; i < NBR_RX_DESC; i++) {
-+ struct sk_buff *skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
-+
-+ np->dma_rx_descr_list[i].skb = skb;
-+ np->dma_rx_descr_list[i].descr.buf =
-+ (char*)virt_to_phys(skb->data);
-+ np->dma_rx_descr_list[i].descr.after =
-+ (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE);
-+
-+ np->dma_rx_descr_list[i].descr.eol = 0;
-+ np->dma_rx_descr_list[i].descr.in_eop = 0;
-+ np->dma_rx_descr_list[i].descr.next =
-+ (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr);
-+ }
-+ /* bend the list into a ring */
-+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next =
-+ (void *) virt_to_phys(&np->dma_rx_descr_list[0].descr);
-+
-+ /* Initialize transmit descriptors. */
-+ for (i = 0; i < NBR_TX_DESC; i++) {
-+ np->dma_tx_descr_list[i].descr.wait = 1;
-+ np->dma_tx_descr_list[i].descr.eol = 0;
-+ np->dma_tx_descr_list[i].descr.out_eop = 0;
-+ np->dma_tx_descr_list[i].descr.next =
-+ (void*)virt_to_phys(&np->dma_tx_descr_list[i+1].descr);
-+ }
-+ /* bend the list into a ring */
-+ np->dma_tx_descr_list[NBR_TX_DESC - 1].descr.next =
-+ (void *) virt_to_phys(&np->dma_tx_descr_list[0].descr);
-+
-+ crisv32_eth_reset_rings(dev);
-+}
-+
-+static void
-+crisv32_eth_reset_rings(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ int i;
-+
-+ /* free un-handled tx packets */
-+ while(np->txpackets
-+ || np->catch_tx_desc != np->active_tx_desc) {
-+ np->txpackets--;
-+ if (np->catch_tx_desc->skb)
-+ dev_kfree_skb(np->catch_tx_desc->skb);
-+
-+ np->catch_tx_desc->skb = 0;
-+ np->catch_tx_desc =
-+ phys_to_virt((int)np->catch_tx_desc->descr.next);
-+ } while (np->catch_tx_desc != np->active_tx_desc);
-+ WARN_ON(np->txpackets != 0);
-+ np->txpackets = 0;
-+
-+ /* cleanup the rx-ring */
-+ for (i = 0; i < NBR_RX_DESC; i++) {
-+ struct sk_buff *skb;
-+ skb = np->dma_rx_descr_list[i].skb;
-+ if (!skb
-+ || (np->dma_rx_descr_list[i].descr.buf !=
-+ (void *)virt_to_phys(skb->data)))
-+ {
-+ printk("%s:%d: damaged rx-ring! "
-+ "i=%d skb=%p %lx %lx %p %p\n",
-+ __func__, __LINE__, i,
-+ skb,
-+ virt_to_phys(skb->data),
-+ virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE),
-+ np->dma_rx_descr_list[i].descr.buf,
-+ np->dma_rx_descr_list[i].descr.after);
-+ WARN_ON(1);
-+ crisv32_ethernet_bug(dev);
-+ if (skb)
-+ dev_kfree_skb(skb);
-+ skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
-+ np->dma_rx_descr_list[i].skb = skb;
-+ np->dma_rx_descr_list[i].descr.buf =
-+ (char*)virt_to_phys(skb->data);
-+ }
-+ np->dma_rx_descr_list[i].descr.after =
-+ (char*)virt_to_phys(skb->data
-+ + MAX_MEDIA_DATA_SIZE);
-+ np->dma_rx_descr_list[i].descr.eol = 0;
-+ np->dma_rx_descr_list[i].descr.in_eop = 0;
-+ /* Workaround cache bug */
-+ flush_dma_descr(&np->dma_rx_descr_list[i].descr, 1);
-+ }
-+
-+ /* reset rx-ring */
-+ np->active_rx_desc = &np->dma_rx_descr_list[0];
-+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1];
-+ np->last_rx_desc = np->prev_rx_desc;
-+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1;
-+
-+ /* reset tx-ring */
-+ np->dma_tx_descr_list[0].descr.buf =
-+ np->dma_tx_descr_list[0].descr.after = 0;
-+ np->dma_rx_descr_list[i].descr.in_eop = 0;
-+ np->dma_tx_descr_list[0].descr.eol = 1;
-+
-+ np->active_tx_desc = &np->dma_tx_descr_list[0];
-+ np->prev_tx_desc = &np->dma_tx_descr_list[NBR_TX_DESC - 1];
-+ np->catch_tx_desc = &np->dma_tx_descr_list[0];
-+
-+ /* Fill context descriptors. */
-+ np->ctxt_in.next = 0;
-+ np->ctxt_in.saved_data =
-+ (void *)virt_to_phys(&np->active_rx_desc->descr);
-+ np->ctxt_in.saved_data_buf = np->active_rx_desc->descr.buf;
-+
-+ np->ctxt_out.next = 0;
-+ np->ctxt_out.saved_data =
-+ (void *)virt_to_phys(&np->dma_tx_descr_list[0].descr);
-+}
-+
-+static void __init
-+crisv32_init_leds(int ledgrp, struct net_device* dev)
-+{
-+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0);
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* Use already allocated led grp if initialized */
-+ if (crisv32_leds[ledgrp] != NULL) {
-+ np->leds = crisv32_leds[ledgrp];
-+ return;
-+ }
-+
-+ crisv32_leds[ledgrp] = kmalloc(sizeof(struct crisv32_eth_leds),GFP_KERNEL);
-+
-+ crisv32_leds[ledgrp]->ledgrp = ledgrp;
-+ crisv32_leds[ledgrp]->led_active = 0;
-+ /* NOTE: Should this value be set to zero as the jiffies timer can wrap? */
-+ crisv32_leds[ledgrp]->led_next_time = jiffies;
-+
-+ crisv32_leds[ledgrp]->clear_led_timer = timer_init;
-+ crisv32_leds[ledgrp]->clear_led_timer.function = crisv32_clear_network_leds;
-+ crisv32_leds[ledgrp]->clear_led_timer.data = (unsigned long) dev;
-+
-+ spin_lock_init(&crisv32_leds[ledgrp]->led_lock);
-+
-+ np->leds = crisv32_leds[ledgrp];
-+}
-+
-+static int __init
-+crisv32_ethernet_init(void)
-+{
-+ struct crisv32_ethernet_local *np;
-+ int ret = 0;
-+
-+ printk("ETRAX FS 10/100MBit ethernet v0.01 (c)"
-+ " 2003 Axis Communications AB\n");
-+
-+#ifdef CONFIG_ETRAX_ETHERNET_IFACE0
-+{
-+ int iface0 = 0;
-+ /* Default MAC address for interface 0.
-+ * The real one will be set later. */
-+ static struct sockaddr default_mac_iface0 =
-+ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00}};
-+
-+ if (!(crisv32_dev[iface0] = alloc_etherdev(sizeof *np)))
-+ return -ENOMEM;
-+
-+ ret |= crisv32_ethernet_device_init(crisv32_dev[iface0]);
-+
-+#if defined(CONFIG_ETRAX_ETH0_USE_LEDGRP0)
-+ crisv32_init_leds(LED_GRP_0,crisv32_dev[iface0]);
-+#elif defined(CONFIG_ETRAX_ETH0_USE_LEDGRP1)
-+ crisv32_init_leds(LED_GRP_1,crisv32_dev[iface0]);
-+#else
-+ crisv32_init_leds(LED_GRP_NONE,crisv32_dev[iface0]);
-+#endif
-+
-+ np = (struct crisv32_ethernet_local *) crisv32_dev[iface0]->priv;
-+ np->eth_inst = regi_eth0;
-+ np->dma_out_inst = regi_dma0;
-+ np->dma_in_inst = regi_dma1;
-+
-+ register_netdev(crisv32_dev[iface0]);
-+
-+ /* Set up default MAC address */
-+ memcpy(crisv32_dev[iface0]->dev_addr, default_mac_iface0.sa_data, 6);
-+ crisv32_eth_set_mac_address(crisv32_dev[iface0], &default_mac_iface0);
-+ if (crisv32_eth_request_irqdma(crisv32_dev[iface0]))
-+ printk("%s: eth0 unable to allocate IRQ and DMA resources\n",
-+ __func__);
-+ np->txpackets = 0;
-+ crisv32_eth_init_rings(crisv32_dev[iface0]);
-+ crisv32_eth_setup_controller(crisv32_dev[iface0]);
-+}
-+#endif /* CONFIG_ETRAX_ETHERNET_IFACE0 */
-+
-+#ifdef CONFIG_ETRAX_ETHERNET_IFACE1
-+{
-+ int iface1 = 0;
-+ /* Default MAC address for interface 1.
-+ * The real one will be set later. */
-+ static struct sockaddr default_mac_iface1 =
-+ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x01}};
-+
-+ if (crisv32_pinmux_alloc_fixed(pinmux_eth1))
-+ panic("Eth pinmux\n");
-+
-+ /* Increase index to device array if interface 0 is enabled as well.*/
-+#ifdef CONFIG_ETRAX_ETHERNET_IFACE0
-+ iface1++;
-+#endif
-+ if (!(crisv32_dev[iface1] = alloc_etherdev(sizeof *np)))
-+ return -ENOMEM;
-+
-+ ret |= crisv32_ethernet_device_init(crisv32_dev[iface1]);
-+
-+#if defined(CONFIG_ETRAX_ETH1_USE_LEDGRP0)
-+ crisv32_init_leds(LED_GRP_0,crisv32_dev[iface1]);
-+#elif defined(CONFIG_ETRAX_ETH1_USE_LEDGRP1)
-+ crisv32_init_leds(LED_GRP_1,crisv32_dev[iface1]);
-+#else
-+ crisv32_init_leds(LED_GRP_NONE,crisv32_dev[iface1]);
-+#endif
-+
-+ np = (struct crisv32_ethernet_local *) crisv32_dev[iface1]->priv;
-+ np->eth_inst = regi_eth1;
-+ np->dma_out_inst = regi_dma6;
-+ np->dma_in_inst = regi_dma7;
-+
-+ register_netdev(crisv32_dev[iface1]);
-+
-+ /* Set up default MAC address */
-+ memcpy(crisv32_dev[iface1]->dev_addr, default_mac_iface1.sa_data, 6);
-+ crisv32_eth_set_mac_address(crisv32_dev[iface1], &default_mac_iface1);
-+
-+ if (crisv32_eth_request_irqdma(crisv32_dev[iface1]))
-+ printk("%s: eth1 unable to allocate IRQ and DMA resources\n",
-+ __func__);
-+ np->txpackets = 0;
-+ crisv32_eth_init_rings(crisv32_dev[iface1]);
-+ crisv32_eth_setup_controller(crisv32_dev[iface1]);
-+}
-+#endif /* CONFIG_ETRAX_ETHERNET_IFACE1 */
-+
-+#ifdef CONFIG_CPU_FREQ
-+ cpufreq_register_notifier(&crisv32_ethernet_freq_notifier_block,
-+ CPUFREQ_TRANSITION_NOTIFIER);
-+#endif
-+
-+ return ret;
-+}
-+
-+static int __init
-+crisv32_ethernet_device_init(struct net_device* dev)
-+{
-+ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0);
-+ struct crisv32_ethernet_local *np;
-+
-+ dev->base_addr = 0; /* Just to have something to show. */
-+
-+ /* we do our own locking */
-+ dev->features |= NETIF_F_LLTX;
-+
-+ /* We use several IRQs and DMAs so just report 0 here. */
-+ dev->irq = 0;
-+ dev->dma = 0;
-+
-+ /*
-+ * Fill in our handlers so the network layer can talk to us in the
-+ * future.
-+ */
-+ dev->open = crisv32_eth_open;
-+ dev->hard_start_xmit = crisv32_eth_send_packet;
-+ dev->stop = crisv32_eth_close;
-+ dev->get_stats = crisv32_get_stats;
-+ dev->set_multicast_list = crisv32_eth_set_multicast_list;
-+ dev->set_mac_address = crisv32_eth_set_mac_address;
-+ dev->ethtool_ops = &crisv32_ethtool_ops;
-+ dev->do_ioctl = crisv32_eth_ioctl;
-+ dev->set_config = crisv32_eth_set_config;
-+ dev->tx_timeout = crisv32_eth_tx_timeout;
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+ dev->poll_controller = crisv32_netpoll;
-+#endif
-+
-+ np = netdev_priv(dev);
-+
-+ spin_lock_init(&np->lock);
-+ spin_lock_init(&np->transceiver_lock);
-+
-+ /* Initialize speed indicator stuff. */
-+ np->current_speed = 10;
-+ np->current_speed_selection = 0; /* Auto. */
-+ np->speed_timer = timer_init;
-+ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-+ np->speed_timer.data = (unsigned long) dev;
-+ np->speed_timer.function = crisv32_eth_check_speed;
-+
-+ np->full_duplex = 0;
-+ np->current_duplex = autoneg;
-+ np->duplex_timer = timer_init;
-+ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-+ np->duplex_timer.data = (unsigned long) dev;
-+ np->duplex_timer.function = crisv32_eth_check_duplex;
-+
-+ return 0;
-+}
-+
-+static int
-+crisv32_eth_open(struct net_device *dev)
-+{
-+ struct sockaddr mac_addr;
-+ reg_dma_rw_ack_intr ack_intr = { .data = 1,.in_eop = 1 };
-+ reg_dma_rw_cfg dma_cfg = { .en = 1 };
-+ reg_eth_rw_clr_err clr_err = {.clr = regk_eth_yes};
-+ int intr_mask_nw = 0x1cff;
-+ int eth_ack_intr = 0xffff;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->lock);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ np->gigabit_mode = 0;
-+#endif
-+ crisv32_disable_tx_ints(np);
-+ crisv32_disable_rx_ints(np);
-+
-+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err);
-+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, eth_ack_intr);
-+ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw);
-+ crisv32_eth_reset_rings(dev);
-+
-+ /* Give the hardware an idea of what MAC address we want. */
-+ memcpy(mac_addr.sa_data, dev->dev_addr, dev->addr_len);
-+ crisv32_eth_set_mac_address(dev, &mac_addr);
-+
-+ /* Enable irq and make sure that the irqs are cleared. */
-+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+ /* Prepare input DMA. */
-+ DMA_RESET(np->dma_in_inst);
-+ DMA_ENABLE(np->dma_in_inst);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ DMA_WR_CMD(np->dma_in_inst, regk_dma_set_w_size2);
-+#endif
-+ DMA_START_CONTEXT( np->dma_in_inst, virt_to_phys(&np->ctxt_in));
-+ DMA_CONTINUE(np->dma_in_inst);
-+ crisv32_enable_rx_ints(np);
-+ crisv32_start_receiver(np);
-+
-+ /* Prepare output DMA. */
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_set_w_size4);
-+#endif
-+ REG_WR(dma, np->dma_out_inst, rw_cfg, dma_cfg);
-+ netif_start_queue(dev);
-+ crisv32_enable_tx_ints(np);
-+
-+ /* Start duplex/speed timers */
-+ add_timer(&np->speed_timer);
-+ add_timer(&np->duplex_timer);
-+
-+ spin_unlock(&np->lock);
-+ /*
-+ * We are now ready to accept transmit requeusts from the queueing
-+ * layer of the networking.
-+ */
-+ netif_carrier_on(dev);
-+
-+ return 0;
-+}
-+
-+static int
-+crisv32_eth_close(struct net_device *dev)
-+{
-+ reg_dma_rw_ack_intr ack_intr = {0};
-+
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ printk(KERN_INFO "Closing %s.\n", dev->name);
-+
-+ /* stop the receiver before the DMA channels to avoid overruns. */
-+ crisv32_stop_receiver(np);
-+
-+ spin_lock_irqsave(&np->lock, flags);
-+ netif_stop_queue(dev);
-+
-+ /* Reset the TX DMA in case it has hung on something. */
-+ DMA_RESET(np->dma_in_inst);
-+
-+ /* Stop DMA */
-+ DMA_STOP(np->dma_in_inst);
-+ DMA_STOP(np->dma_out_inst);
-+
-+ /* Disable irq and make sure that the irqs are cleared. */
-+ crisv32_disable_tx_ints(np);
-+ ack_intr.data = 1;
-+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
-+
-+ crisv32_disable_rx_ints(np);
-+ ack_intr.in_eop = 1;
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+ np->sender_started = 0;
-+ spin_unlock_irqrestore(&np->lock, flags);
-+
-+ /* Update the statistics. */
-+ update_rx_stats(np);
-+ update_tx_stats(np);
-+
-+ /* Stop speed/duplex timers */
-+ del_timer(&np->speed_timer);
-+ del_timer(&np->duplex_timer);
-+
-+ return 0;
-+}
-+
-+static int
-+crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr)
-+{
-+ int i;
-+ unsigned char *addr = ((struct sockaddr*)vpntr)->sa_data;
-+
-+ reg_eth_rw_ma0_lo ma0_lo =
-+ { addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24)};
-+
-+ reg_eth_rw_ma0_hi ma0_hi = { addr[4] | (addr[5] << 8) };
-+
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* Remember the address. */
-+ memcpy(dev->dev_addr, addr, dev->addr_len);
-+
-+ /*
-+ * Write the address to the hardware.
-+ * Note the way the address is wrapped:
-+ * ma0_l0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24);
-+ * ma0_hi = a0_4 | (a0_5 << 8);
-+ */
-+ REG_WR(eth, np->eth_inst, rw_ma0_lo, ma0_lo);
-+ REG_WR(eth, np->eth_inst, rw_ma0_hi, ma0_hi);
-+
-+ printk(KERN_INFO "%s: changed MAC to ", dev->name);
-+
-+ for (i = 0; i < 5; i++)
-+ printk("%02X:", dev->dev_addr[i]);
-+
-+ printk("%02X\n", dev->dev_addr[i]);
-+
-+ return 0;
-+}
-+
-+static irqreturn_t
-+crisv32rx_eth_interrupt(int irq, void *dev_id)
-+{
-+ reg_dma_r_masked_intr masked_in;
-+ reg_dma_rw_cmd cmd = {0};
-+ reg_dma_rw_ack_intr ack_intr = {0};
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ masked_in = REG_RD(dma, np->dma_in_inst, r_masked_intr);
-+
-+ if (masked_in.in_eop) {
-+ DEBUG(printk("EOP_IN interrupt\n"));
-+
-+ /* Acknowledge input dma interrupt. */
-+ ack_intr.in_eop = 1;
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+ np->new_rx_package = 1;
-+ /* Check if complete packets were indeed received. */
-+ while (np->active_rx_desc->descr.in_eop == 1
-+ && np->new_rx_package) {
-+ /*
-+ * Take out the buffer and give it to the OS, then
-+ * allocate a new buffer to put a packet in.
-+ */
-+ crisv32_eth_receive_packet(dev);
-+
-+ /* Update number of packets received. */
-+ np->stats.rx_packets++;
-+
-+ /* Restarts input dma. */
-+ cmd.cont_data = 1;
-+ REG_WR(dma, np->dma_in_inst, rw_cmd, cmd);
-+
-+ /* Acknowledge input dma interrupt. */
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+ }
-+ }
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t
-+crisv32tx_eth_interrupt(int irq, void *dev_id)
-+{
-+ reg_dma_rw_stat stat;
-+ dma_descr_data *dma_pos;
-+ reg_dma_rw_ack_intr ack_intr = { .data = 1 };
-+ reg_dma_r_masked_intr masked_out;
-+
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ masked_out = REG_RD(dma, np->dma_out_inst, r_masked_intr);
-+
-+ /* Get the current output dma position. */
-+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
-+ if (stat.list_state == regk_dma_data_at_eol)
-+ dma_pos = &np->active_tx_desc->descr;
-+ else
-+ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst,
-+ rw_data));
-+
-+ /* ack the interrupt */
-+ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr);
-+
-+ /* protect against ethernet excessive-col interrupts */
-+ spin_lock_irqsave(&np->lock, flags);
-+
-+ /* Take care of transmited dma descriptors and report sent packet. */
-+ while (np->txpackets && ((&np->catch_tx_desc->descr != dma_pos)
-+ || netif_queue_stopped(dev))) {
-+ /* Update sent packet statistics. */
-+ np->stats.tx_bytes += np->catch_tx_desc->skb->len;
-+ np->stats.tx_packets++;
-+
-+ dev_kfree_skb_irq(np->catch_tx_desc->skb);
-+ np->catch_tx_desc->skb = 0;
-+ np->txpackets--;
-+ np->catch_tx_desc =
-+ phys_to_virt((int)np->catch_tx_desc->descr.next);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ if (np->gigabit_mode) {
-+ np->intmem_tx_buf_catch->free = 1;
-+ np->intmem_tx_buf_catch = np->intmem_tx_buf_catch->next;
-+ }
-+#endif
-+ netif_wake_queue(dev);
-+ }
-+ spin_unlock_irqrestore(&np->lock, flags);
-+ return IRQ_HANDLED;
-+}
-+
-+
-+/* Update receive errors. */
-+static void
-+update_rx_stats(struct crisv32_ethernet_local *np)
-+{
-+ reg_eth_rs_rec_cnt r;
-+ reg_eth_rs_phy_cnt rp;
-+
-+ r = REG_RD(eth, np->eth_inst, rs_rec_cnt);
-+ rp = REG_RD(eth, np->eth_inst, rs_phy_cnt);
-+
-+ np->stats.rx_fifo_errors += r.congestion;
-+ np->stats.rx_crc_errors += r.crc_err;
-+ np->stats.rx_frame_errors += r.align_err;
-+ np->stats.rx_length_errors += r.oversize;
-+}
-+
-+/* Update transmit errors. */
-+static void
-+update_tx_stats(struct crisv32_ethernet_local *np)
-+{
-+ reg_eth_rs_tr_cnt r;
-+
-+ r = REG_RD(eth, np->eth_inst, rs_tr_cnt);
-+
-+ np->stats.collisions += r.single_col + r.mult_col;
-+ np->stats.tx_errors += r.deferred;
-+}
-+
-+/* Get current statistics. */
-+static struct net_device_stats *
-+crisv32_get_stats(struct net_device *dev)
-+{
-+ unsigned long flags;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ spin_lock_irqsave(&np->lock, flags);
-+
-+ update_rx_stats(np);
-+ update_tx_stats(np);
-+
-+ spin_unlock_irqrestore(&np->lock, flags);
-+
-+ return &np->stats;
-+}
-+
-+/* Check for network errors. This acknowledge the received interrupt. */
-+static irqreturn_t
-+crisv32nw_eth_interrupt(int irq, void *dev_id)
-+{
-+ struct net_device *dev = (struct net_device *) dev_id;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ reg_eth_r_masked_intr intr_mask;
-+ int ack_intr = 0xffff;
-+ reg_eth_rw_clr_err clr_err;
-+
-+ intr_mask = REG_RD(eth, np->eth_inst, r_masked_intr);
-+
-+ /*
-+ * Check for underrun and/or excessive collisions. Note that the
-+ * rw_clr_err register clears both underrun and excessive collision
-+ * errors, so there's no need to check them separately.
-+ */
-+ if (np->sender_started
-+ && (intr_mask.urun || intr_mask.exc_col)) {
-+ unsigned long flags;
-+ dma_descr_data *dma_pos;
-+ reg_dma_rw_stat stat;
-+
-+ /* Get the current output dma position. */
-+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
-+ if (stat.list_state == regk_dma_data_at_eol)
-+ dma_pos = &np->active_tx_desc->descr;
-+ else
-+ dma_pos = phys_to_virt(REG_RD_INT(dma,
-+ np->dma_out_inst,
-+ rw_data));
-+
-+ /*
-+ * Protect against the tx-interrupt messing with
-+ * the tx-ring.
-+ */
-+ spin_lock_irqsave(&np->lock, flags);
-+ /*
-+ * If we have more than one packet in the tx-ring
-+ * drop one and move ahead. Upper layers rely on
-+ * packeloss when doing congestion control.
-+ */
-+ if (intr_mask.exc_col && np->txpackets > 1) {
-+ dev_kfree_skb_irq(np->catch_tx_desc->skb);
-+ np->catch_tx_desc->skb = 0;
-+ np->catch_tx_desc =
-+ phys_to_virt((int)
-+ np->catch_tx_desc->descr.next);
-+ np->txpackets--;
-+ netif_wake_queue(dev);
-+ }
-+ np->ctxt_out.next = 0;
-+ if (np->txpackets) {
-+ np->ctxt_out.saved_data = (void *)
-+ virt_to_phys(&np->catch_tx_desc->descr);
-+ np->ctxt_out.saved_data_buf =
-+ np->catch_tx_desc->descr.buf;
-+
-+ /* restart the DMA */
-+ DMA_START_CONTEXT(np->dma_out_inst,
-+ (int) virt_to_phys(&np->ctxt_out));
-+ }
-+ else {
-+ /* let the next packet restart the DMA */
-+ np->ctxt_out.saved_data = (void *)
-+ virt_to_phys(&np->active_tx_desc->descr);
-+ np->sender_started = 0;
-+ }
-+
-+ spin_unlock_irqrestore(&np->lock, flags);
-+ np->stats.tx_errors++;
-+ }
-+
-+ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, ack_intr);
-+ clr_err.clr = 1;
-+ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err);
-+
-+ update_rx_stats(np);
-+ update_tx_stats(np);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/* We have a good packet(s), get it/them out of the buffers. */
-+static void
-+crisv32_eth_receive_packet(struct net_device *dev)
-+{
-+ int length;
-+ struct sk_buff *skb;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ struct sk_buff *tmp;
-+ unsigned long flags;
-+
-+ DEBUG(printk("crisv32_receive_packet\n"));
-+
-+ /* Activate LED */
-+ spin_lock_irqsave(&np->leds->led_lock, flags);
-+ if (!np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) {
-+ /* light the network leds depending on the current speed. */
-+ crisv32_set_network_leds(LED_ACTIVITY, dev);
-+
-+ /* Set the earliest time we may clear the LED */
-+ np->leds->led_next_time = jiffies + NET_FLASH_TIME;
-+ np->leds->led_active = 1;
-+ np->leds->clear_led_timer.data = (unsigned long) dev;
-+ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10);
-+ }
-+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+
-+ /* Discard CRC (4 bytes). */
-+ length = (np->active_rx_desc->descr.after) -
-+ (np->active_rx_desc->descr.buf) - 4;
-+
-+ /* Update received packet statistics. */
-+ np->stats.rx_bytes += length;
-+
-+ if (np->active_rx_desc != np->last_rx_desc) {
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ if (np->gigabit_mode) {
-+ skb = dev_alloc_skb(length);
-+ if(!skb) {
-+ np->stats.rx_errors++;
-+ printk(KERN_NOTICE "%s: memory squeeze,"
-+ " dropping packet.", dev->name);
-+ return;
-+ }
-+ /* Allocate room for the packet body. */
-+ skb_put(skb, length - ETHER_HEAD_LEN);
-+ /* Allocate room for the header and copy the data to
-+ * the SKB */
-+ memcpy(skb_push(skb, ETHER_HEAD_LEN),
-+ crisv32_intmem_phys_to_virt((unsigned long)np->active_rx_desc->descr.buf), length);
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ skb->ip_summed = CHECKSUM_NONE;
-+ /* Send the packet to the upper layer. */
-+ netif_rx(skb);
-+ np->last_rx_desc =
-+ (void *) phys_to_virt(np->last_rx_desc->descr.next);
-+ } else {
-+#endif
-+ tmp = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
-+ if (!tmp) {
-+ np->stats.rx_errors++;
-+ printk(KERN_NOTICE "%s: memory squeeze,"
-+ " dropping packet.",
-+ dev->name);
-+ return;
-+ }
-+ skb = np->active_rx_desc->skb;
-+ np->active_rx_desc->skb = tmp;
-+ skb_put(skb, length);
-+
-+ np->active_rx_desc->descr.buf =
-+ (void *) virt_to_phys(np->active_rx_desc->skb->data);
-+ np->active_rx_desc->descr.after =
-+ np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE;
-+
-+ skb->dev = dev;
-+ skb->protocol = eth_type_trans(skb, dev);
-+ skb->ip_summed = CHECKSUM_NONE;
-+
-+ /* Send the packet to the upper layer. */
-+ netif_rx(skb);
-+ np->last_rx_desc =
-+ phys_to_virt((int)
-+ np->last_rx_desc->descr.next);
-+ }
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ }
-+#endif
-+ /*
-+ * When the input DMA reaches eol precaution must be taken, otherwise
-+ * the DMA could stop. The problem occurs if the eol flag is re-placed
-+ * on the descriptor that the DMA stands on before the DMA proceed to
-+ * the next descriptor. This case could, for example, happen if there
-+ * is a traffic burst and then the network goes silent. To prevent this
-+ * we make sure that we do not set the eol flag on the descriptor that
-+ * the DMA stands on.
-+ */
-+ if(virt_to_phys(&np->active_rx_desc->descr) !=
-+ REG_RD_INT(dma, np->dma_in_inst, rw_saved_data)) {
-+ np->active_rx_desc->descr.after =
-+ np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE;
-+ np->active_rx_desc->descr.eol = 1;
-+ np->active_rx_desc->descr.in_eop = 0;
-+ np->active_rx_desc =
-+ phys_to_virt((int)np->active_rx_desc->descr.next);
-+ barrier();
-+ np->prev_rx_desc->descr.eol = 0;
-+ flush_dma_descr(&np->prev_rx_desc->descr, 0); // Workaround cache bug
-+ np->prev_rx_desc =
-+ phys_to_virt((int)np->prev_rx_desc->descr.next);
-+ flush_dma_descr(&np->prev_rx_desc->descr, 1); // Workaround cache bug
-+ } else {
-+ np->new_rx_package = 0;
-+ }
-+}
-+
-+/*
-+ * This function (i.e. hard_start_xmit) is protected from concurent calls by a
-+ * spinlock (xmit_lock) in the net_device structure.
-+ */
-+static int
-+crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ unsigned char *buf = skb->data;
-+ unsigned long flags;
-+
-+ dev->trans_start = jiffies;
-+
-+ spin_lock_irqsave(&np->leds->led_lock, flags);
-+ if (!np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) {
-+ /* light the network leds depending on the current speed. */
-+ crisv32_set_network_leds(LED_ACTIVITY, dev);
-+
-+ /* Set the earliest time we may clear the LED */
-+ np->leds->led_next_time = jiffies + NET_FLASH_TIME;
-+ np->leds->led_active = 1;
-+ np->leds->clear_led_timer.data = (unsigned long) dev;
-+ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10);
-+ }
-+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+
-+ /*
-+ * Need to disable irq to avoid updating pointer in interrupt while
-+ * sending packets.
-+ */
-+ spin_lock_irqsave(&np->lock, flags);
-+
-+ np->active_tx_desc->skb = skb;
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ if (np->gigabit_mode) {
-+ if(np->intmem_tx_buf_active->free) {
-+ memcpy(np->intmem_tx_buf_active->buf,
-+ skb->data, skb->len);
-+ np->intmem_tx_buf_active->free = 0;
-+ crisv32_eth_hw_send_packet(
-+ np->intmem_tx_buf_active->buf, skb->len, np);
-+ np->intmem_tx_buf_active =
-+ np->intmem_tx_buf_active->next;
-+ } else {
-+ printk("%s: Internal tx memory buffer not free!\n\r",
-+ __FILE__);
-+ spin_unlock_irqrestore(&np->lock, flags);
-+ return 1;
-+ }
-+ }
-+ else
-+#endif
-+ {
-+ crisv32_eth_hw_send_packet(buf, skb->len, np);
-+ }
-+ /* Stop queue if full. */
-+ if (np->active_tx_desc == np->catch_tx_desc)
-+ netif_stop_queue(dev);
-+
-+ np->txpackets++;
-+ spin_unlock_irqrestore(&np->lock, flags);
-+
-+ return 0;
-+}
-+
-+
-+static void
-+crisv32_eth_hw_send_packet(unsigned char *buf, int length, void *priv)
-+{
-+ struct crisv32_ethernet_local *np =
-+ (struct crisv32_ethernet_local *) priv;
-+
-+ /* Configure the tx dma descriptor. */
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ if (np->gigabit_mode) {
-+ np->active_tx_desc->descr.buf = (unsigned char *) crisv32_intmem_virt_to_phys(buf);
-+ } else
-+#endif
-+ {
-+ np->active_tx_desc->descr.buf = (unsigned char *) virt_to_phys(buf);
-+ }
-+
-+ np->active_tx_desc->descr.after = np->active_tx_desc->descr.buf +
-+ length;
-+ np->active_tx_desc->descr.intr = 1;
-+ np->active_tx_desc->descr.out_eop = 1;
-+
-+ /* Move eol. */
-+ np->active_tx_desc->descr.eol = 1;
-+ np->prev_tx_desc->descr.eol = 0;
-+
-+
-+ /* Update pointers. */
-+ np->prev_tx_desc = np->active_tx_desc;
-+ np->active_tx_desc = phys_to_virt((int)np->active_tx_desc->descr.next);
-+
-+ /* Start DMA. */
-+ crisv32_start_dma_out(np);
-+}
-+
-+static void
-+crisv32_start_dma_out(struct crisv32_ethernet_local* np)
-+{
-+ if (!np->sender_started) {
-+ /* Start DMA for the first time. */
-+ np->ctxt_out.saved_data_buf = np->prev_tx_desc->descr.buf;
-+ REG_WR(dma, np->dma_out_inst, rw_group_down,
-+ (int) virt_to_phys(&np->ctxt_out));
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c);
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst);
-+ np->sender_started = 1;
-+ } else {
-+ DMA_CONTINUE_DATA(np->dma_out_inst);
-+ }
-+}
-+
-+/*
-+ * Called by upper layers if they decide it took too long to complete sending
-+ * a packet - we need to reset and stuff.
-+ */
-+static void
-+crisv32_eth_tx_timeout(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ reg_dma_rw_cfg cfg = {0};
-+ reg_dma_rw_stat stat = {0};
-+ unsigned long flags;
-+
-+ printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
-+
-+
-+ spin_lock_irqsave(&np->lock, flags);
-+ crisv32_ethernet_bug(dev);
-+
-+ np->txpackets = 0;
-+ /* Update error stats. */
-+ np->stats.tx_errors++;
-+
-+ /* Reset the TX DMA in case it has hung on something. */
-+ cfg.en = 0;
-+ REG_WR(dma, np->dma_out_inst, rw_cfg, cfg);
-+
-+ do {
-+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
-+ } while (stat.mode != regk_dma_rst);
-+
-+ /* Reset the tranceiver. */
-+ crisv32_eth_reset_tranceiver(dev);
-+
-+ /* Get rid of the packets that never got an interrupt. */
-+ do {
-+ if (np->catch_tx_desc->skb)
-+ dev_kfree_skb(np->catch_tx_desc->skb);
-+
-+ np->catch_tx_desc->skb = 0;
-+ np->catch_tx_desc =
-+ phys_to_virt((int)np->catch_tx_desc->descr.next);
-+ } while (np->catch_tx_desc != np->active_tx_desc);
-+
-+
-+ /* Start output DMA. */
-+ REG_WR(dma, np->dma_out_inst, rw_group_down,
-+ (int) virt_to_phys(&np->ctxt_out));
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c);
-+ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst);
-+ spin_unlock_irqrestore(&np->lock, flags);
-+
-+ /* Tell the upper layers we're ok again. */
-+ netif_wake_queue(dev);
-+}
-+
-+/*
-+ * Set or clear the multicast filter for this adaptor.
-+ * num_addrs == -1 Promiscuous mode, receive all packets
-+ * num_addrs == 0 Normal mode, clear multicast list
-+ * num_addrs > 0 Multicast mode, receive normal and MC packets,
-+ * and do best-effort filtering.
-+ */
-+static void
-+crisv32_eth_set_multicast_list(struct net_device *dev)
-+{
-+ int num_addr = dev->mc_count;
-+ unsigned long int lo_bits;
-+ unsigned long int hi_bits;
-+ reg_eth_rw_rec_ctrl rec_ctrl = {0};
-+ reg_eth_rw_ga_lo ga_lo = {0};
-+ reg_eth_rw_ga_hi ga_hi = {0};
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ if (dev->flags & IFF_PROMISC) {
-+ /* Promiscuous mode. */
-+ lo_bits = 0xfffffffful;
-+ hi_bits = 0xfffffffful;
-+
-+ /* Enable individual receive. */
-+ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst,
-+ rw_rec_ctrl);
-+ rec_ctrl.individual = regk_eth_yes;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ } else if (dev->flags & IFF_ALLMULTI) {
-+ /* Enable all multicasts. */
-+ lo_bits = 0xfffffffful;
-+ hi_bits = 0xfffffffful;
-+
-+ /* Disable individual receive */
-+ rec_ctrl =
-+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.individual = regk_eth_no;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ } else if (num_addr == 0) {
-+ /* Normal, clear the mc list. */
-+ lo_bits = 0x00000000ul;
-+ hi_bits = 0x00000000ul;
-+
-+ /* Disable individual receive */
-+ rec_ctrl =
-+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.individual = regk_eth_no;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ } else {
-+ /* MC mode, receive normal and MC packets. */
-+ char hash_ix;
-+ struct dev_mc_list *dmi = dev->mc_list;
-+ int i;
-+ char *baddr;
-+ lo_bits = 0x00000000ul;
-+ hi_bits = 0x00000000ul;
-+
-+ for (i = 0; i < num_addr; i++) {
-+ /* Calculate the hash index for the GA registers. */
-+ hash_ix = 0;
-+ baddr = dmi->dmi_addr;
-+ hash_ix ^= (*baddr) & 0x3f;
-+ hash_ix ^= ((*baddr) >> 6) & 0x03;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 2) & 0x03c;
-+ hash_ix ^= ((*baddr) >> 4) & 0xf;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 4) & 0x30;
-+ hash_ix ^= ((*baddr) >> 2) & 0x3f;
-+ ++baddr;
-+ hash_ix ^= (*baddr) & 0x3f;
-+ hash_ix ^= ((*baddr) >> 6) & 0x03;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 2) & 0x03c;
-+ hash_ix ^= ((*baddr) >> 4) & 0xf;
-+ ++baddr;
-+ hash_ix ^= ((*baddr) << 4) & 0x30;
-+ hash_ix ^= ((*baddr) >> 2) & 0x3f;
-+
-+ hash_ix &= 0x3f;
-+
-+ if (hash_ix > 32)
-+ hi_bits |= (1 << (hash_ix - 32));
-+ else
-+ lo_bits |= (1 << hash_ix);
-+
-+ dmi = dmi->next;
-+ }
-+
-+ /* Disable individual receive. */
-+ rec_ctrl =
-+ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl);
-+ rec_ctrl.individual = regk_eth_no;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ }
-+
-+ ga_lo.tbl = (unsigned int) lo_bits;
-+ ga_hi.tbl = (unsigned int) hi_bits;
-+
-+ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo);
-+ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi);
-+}
-+
-+static int
-+crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-+{
-+ struct mii_ioctl_data *data = if_mii(ifr);
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ int old_autoneg;
-+
-+ spin_lock(&np->lock); /* Preempt protection */
-+ switch (cmd) {
-+ case SIOCGMIIPHY: /* Get PHY address */
-+ data->phy_id = np->mdio_phy_addr;
-+ break;
-+ case SIOCGMIIREG: /* Read MII register */
-+ data->val_out = crisv32_eth_get_mdio_reg(dev,
-+ data->reg_num);
-+ break;
-+ case SIOCSMIIREG: /* Write MII register */
-+ crisv32_eth_set_mdio_reg(dev, data->reg_num,
-+ data->val_in);
-+ break;
-+ case SET_ETH_ENABLE_LEDS:
-+ use_network_leds = 1;
-+ break;
-+ case SET_ETH_DISABLE_LEDS:
-+ use_network_leds = 0;
-+ break;
-+ case SET_ETH_AUTONEG:
-+ old_autoneg = autoneg_normal;
-+ autoneg_normal = *(int*)data;
-+ if (autoneg_normal != old_autoneg)
-+ crisv32_eth_negotiate(dev);
-+ break;
-+ default:
-+ spin_unlock(&np->lock); /* Preempt protection */
-+ return -EINVAL;
-+ }
-+ spin_unlock(&np->lock);
-+ return 0;
-+}
-+
-+static int crisv32_eth_get_settings(struct net_device *dev,
-+ struct ethtool_cmd *ecmd)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ /* What about GMII and 1000xpause? not included in ethtool.h */
-+ ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |
-+ SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
-+ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full;
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ ecmd->supported |= SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full;
-+#endif
-+ ecmd->port = PORT_TP;
-+ ecmd->transceiver = XCVR_EXTERNAL;
-+ ecmd->phy_address = np->mdio_phy_addr;
-+ ecmd->speed = np->current_speed;
-+ ecmd->duplex = np->full_duplex;
-+ ecmd->advertising = ADVERTISED_TP;
-+
-+ if (np->current_duplex == autoneg && np->current_speed_selection == 0)
-+ ecmd->advertising |= ADVERTISED_Autoneg;
-+ else {
-+ ecmd->advertising |=
-+ ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full |
-+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full;
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ ecmd->advertising |= ADVERTISED_1000baseT_Half |
-+ ADVERTISED_1000baseT_Full;
-+#endif
-+ if (np->current_speed_selection == 10)
-+ ecmd->advertising &= ~(ADVERTISED_100baseT_Half |
-+ ADVERTISED_100baseT_Full |
-+ ADVERTISED_1000baseT_Half |
-+ ADVERTISED_1000baseT_Full);
-+
-+ else if (np->current_speed_selection == 100)
-+ ecmd->advertising &= ~(ADVERTISED_10baseT_Half |
-+ ADVERTISED_10baseT_Full |
-+ ADVERTISED_1000baseT_Half |
-+ ADVERTISED_1000baseT_Full);
-+
-+ else if (np->current_speed_selection == 1000)
-+ ecmd->advertising &= ~(ADVERTISED_10baseT_Half |
-+ ADVERTISED_10baseT_Full |
-+ ADVERTISED_100baseT_Half |
-+ ADVERTISED_100baseT_Full);
-+
-+ if (np->current_duplex == half)
-+ ecmd->advertising &= ~(ADVERTISED_10baseT_Full |
-+ ADVERTISED_100baseT_Full |
-+ ADVERTISED_1000baseT_Full);
-+ else if (np->current_duplex == full)
-+ ecmd->advertising &= ~(ADVERTISED_10baseT_Half |
-+ ADVERTISED_100baseT_Half |
-+ ADVERTISED_1000baseT_Half);
-+ }
-+
-+ ecmd->autoneg = AUTONEG_ENABLE;
-+ return 0;
-+}
-+
-+static int crisv32_eth_set_settings(struct net_device *dev,
-+ struct ethtool_cmd *ecmd)
-+{
-+ if (ecmd->autoneg == AUTONEG_ENABLE) {
-+ crisv32_eth_set_duplex(dev, autoneg);
-+ crisv32_eth_set_speed(dev, 0);
-+ } else {
-+ crisv32_eth_set_duplex(dev, ecmd->duplex);
-+ crisv32_eth_set_speed(dev, ecmd->speed);
-+ }
-+
-+ return 0;
-+}
-+
-+static void crisv32_eth_get_drvinfo(struct net_device *dev,
-+ struct ethtool_drvinfo *info)
-+{
-+ strncpy(info->driver, "ETRAX FS", sizeof(info->driver) - 1);
-+ strncpy(info->version, "$Revision: 1.96 $", sizeof(info->version) - 1);
-+ strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1);
-+ strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1);
-+}
-+
-+static int crisv32_eth_nway_reset(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ if (np->current_duplex == autoneg && np->current_speed_selection == 0)
-+ crisv32_eth_negotiate(dev);
-+ return 0;
-+}
-+
-+static struct ethtool_ops crisv32_ethtool_ops = {
-+ .get_settings = crisv32_eth_get_settings,
-+ .set_settings = crisv32_eth_set_settings,
-+ .get_drvinfo = crisv32_eth_get_drvinfo,
-+ .nway_reset = crisv32_eth_nway_reset,
-+ .get_link = ethtool_op_get_link,
-+};
-+
-+/* Is this function really needed? Use ethtool instead? */
-+static int
-+crisv32_eth_set_config(struct net_device *dev, struct ifmap *map)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->lock); /* Preempt protection */
-+
-+ switch(map->port) {
-+ case IF_PORT_UNKNOWN:
-+ /* Use autoneg */
-+ crisv32_eth_set_speed(dev, 0);
-+ crisv32_eth_set_duplex(dev, autoneg);
-+ break;
-+ case IF_PORT_10BASET:
-+ crisv32_eth_set_speed(dev, 10);
-+ crisv32_eth_set_duplex(dev, autoneg);
-+ break;
-+ case IF_PORT_100BASET:
-+ case IF_PORT_100BASETX:
-+ crisv32_eth_set_speed(dev, 100);
-+ crisv32_eth_set_duplex(dev, autoneg);
-+ break;
-+ case IF_PORT_100BASEFX:
-+ case IF_PORT_10BASE2:
-+ case IF_PORT_AUI:
-+ spin_unlock(&np->lock);
-+ return -EOPNOTSUPP;
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: Invalid media selected",
-+ dev->name);
-+ spin_unlock(&np->lock);
-+ return -EINVAL;
-+ }
-+ spin_unlock(&np->lock);
-+ return 0;
-+}
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+/*
-+ * Switch the behaviour of the tx and rx buffers using
-+ * external or internal memory. Usage of the internal
-+ * memory is required for gigabit operation.
-+ */
-+static void
-+crisv32_eth_switch_intmem_usage(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ int i;
-+ reg_dma_rw_stat stat;
-+ reg_dma_rw_cfg cfg = {0};
-+ reg_dma_rw_intr_mask intr_mask_in = { .in_eop = regk_dma_yes };
-+ reg_dma_rw_ack_intr ack_intr = { .data = 1,.in_eop = 1 };
-+ unsigned char *intmem_tmp;
-+
-+ /* Notify the kernel that the interface has stopped */
-+ netif_stop_queue(dev);
-+
-+ /* Stop the receiver DMA */
-+ cfg.en = regk_dma_no;
-+ REG_WR(dma, np->dma_in_inst, rw_cfg, cfg);
-+
-+ if (!(np->gigabit_mode)) {
-+ /* deallocate SKBs in rx_desc */
-+ for (i = 0; i < NBR_RX_DESC; i++)
-+ dev_kfree_skb(np->dma_rx_descr_list[i].skb);
-+
-+ /* Init TX*/
-+ for(i=0; i < NBR_INTMEM_TX_BUF; i++) {
-+ /* Allocate internal memory */
-+ intmem_tmp = NULL;
-+ intmem_tmp = crisv32_intmem_alloc(MAX_MEDIA_DATA_SIZE,
-+ 32);
-+ /* Check that we really got the memory */
-+ if (intmem_tmp == NULL) {
-+ printk(KERN_ERR "%s: Can't allocate intmem for"
-+ " RX buffer nbr: %d\n", dev->name, i);
-+ return;
-+ }
-+ /* Setup the list entry */
-+ np->tx_intmem_buf_list[i].free = 1;
-+ np->tx_intmem_buf_list[i].buf = intmem_tmp;
-+ np->tx_intmem_buf_list[i].next = &np->tx_intmem_buf_list[i + 1];
-+ }
-+ /* Setup the last list entry */
-+ np->tx_intmem_buf_list[NBR_INTMEM_TX_BUF - 1].next = &np->tx_intmem_buf_list[0];
-+ /* Setup initial pointer */
-+ np->intmem_tx_buf_active = np->tx_intmem_buf_list;
-+ np->intmem_tx_buf_catch = np->tx_intmem_buf_list;
-+
-+ /* Init RX */
-+ for (i=0; i < NBR_INTMEM_RX_DESC; i++) {
-+ /* Allocate internal memory */
-+ intmem_tmp = NULL;
-+ intmem_tmp = crisv32_intmem_alloc(MAX_MEDIA_DATA_SIZE, 32);
-+ /* Check that we really got the memory */
-+ if (intmem_tmp == NULL) {
-+ printk(KERN_ERR "%s: Can't allocate intmem for"
-+ " desc nbr: %d\n", dev->name, i);
-+ return;
-+ }
-+ /* Setup the descriptors*/
-+ np->dma_rx_descr_list[i].skb = NULL;
-+ np->dma_rx_descr_list[i].descr.buf =
-+ (void *) crisv32_intmem_virt_to_phys(intmem_tmp);
-+ np->dma_rx_descr_list[i].descr.after =
-+ (void *) crisv32_intmem_virt_to_phys(intmem_tmp + MAX_MEDIA_DATA_SIZE);
-+ np->dma_rx_descr_list[i].descr.eol = 0;
-+ np->dma_rx_descr_list[i].descr.in_eop = 0;
-+ np->dma_rx_descr_list[i].descr.next =
-+ (void *) virt_to_phys(&np->dma_rx_descr_list[i+1].descr);
-+ }
-+ /* Setup the last rx descriptor */
-+ np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1].descr.eol = 1;
-+ np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1].descr.next =
-+ (void*) virt_to_phys(&np->dma_rx_descr_list[0].descr);
-+ /* Initialise initial receive pointers. */
-+ np->active_rx_desc = &np->dma_rx_descr_list[0];
-+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1];
-+ np->last_rx_desc = np->prev_rx_desc;
-+
-+ np->gigabit_mode = 1;
-+ } else {
-+ /* dealloc TX intmem */
-+ for(i=0; i < NBR_INTMEM_TX_BUF; i++)
-+ crisv32_intmem_free(np->tx_intmem_buf_list[i].buf);
-+
-+ /* dealloc RX intmem */
-+ for (i=0; i < NBR_INTMEM_RX_DESC; i++)
-+ crisv32_intmem_free(crisv32_intmem_phys_to_virt((unsigned long)np->dma_rx_descr_list[i].descr.buf));
-+
-+ /* Setup new rx_desc and alloc SKBs */
-+ for (i = 0; i < NBR_RX_DESC; i++) {
-+ struct sk_buff *skb;
-+
-+ skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE);
-+ np->dma_rx_descr_list[i].skb = skb;
-+ np->dma_rx_descr_list[i].descr.buf =
-+ (char*)virt_to_phys(skb->data);
-+ np->dma_rx_descr_list[i].descr.after =
-+ (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE);
-+
-+ np->dma_rx_descr_list[i].descr.eol = 0;
-+ np->dma_rx_descr_list[i].descr.in_eop = 0;
-+ np->dma_rx_descr_list[i].descr.next =
-+ (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr);
-+ }
-+
-+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1;
-+ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next =
-+ (void *) virt_to_phys(&np->dma_rx_descr_list[0].descr);
-+
-+ /* Initialise initial receive pointers. */
-+ np->active_rx_desc = &np->dma_rx_descr_list[0];
-+ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1];
-+ np->last_rx_desc = np->prev_rx_desc;
-+
-+ np->gigabit_mode = 0;
-+ }
-+
-+ /* Fill context descriptors. */
-+ np->ctxt_in.next = 0;
-+ np->ctxt_in.saved_data =
-+ (dma_descr_data *) virt_to_phys(&np->dma_rx_descr_list[0].descr);
-+ np->ctxt_in.saved_data_buf = np->dma_rx_descr_list[0].descr.buf;
-+
-+ /* Enable irq and make sure that the irqs are cleared. */
-+ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_in);
-+ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr);
-+
-+ /* Start input dma */
-+ cfg.en = regk_dma_yes;
-+ REG_WR(dma, np->dma_in_inst, rw_cfg, cfg);
-+ REG_WR(dma, np->dma_in_inst, rw_group_down,
-+ (int) virt_to_phys(&np->ctxt_in));
-+
-+ DMA_WR_CMD(np->dma_in_inst, regk_dma_load_c);
-+ DMA_WR_CMD(np->dma_in_inst, regk_dma_load_d | regk_dma_burst);
-+
-+ netif_wake_queue(dev);
-+
-+ stat = REG_RD(dma, np->dma_in_inst, rw_stat);
-+}
-+#endif
-+
-+static void
-+crisv32_eth_negotiate(struct net_device *dev)
-+{
-+ unsigned short data =
-+ crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE);
-+ unsigned short ctrl1000 =
-+ crisv32_eth_get_mdio_reg(dev, MII_CTRL1000);
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* Make all capabilities available */
-+ data |= ADVERTISE_10HALF | ADVERTISE_10FULL |
-+ ADVERTISE_100HALF | ADVERTISE_100FULL;
-+ ctrl1000 |= ADVERTISE_1000HALF | ADVERTISE_1000FULL;
-+
-+ /* Remove the speed capabilities that we that do not want */
-+ switch (np->current_speed_selection) {
-+ case 10 :
-+ data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL);
-+ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+ break;
-+ case 100 :
-+ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL);
-+ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
-+ break;
-+ case 1000 :
-+ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL |
-+ ADVERTISE_100HALF | ADVERTISE_100FULL);
-+ break;
-+ }
-+
-+ /* Remove the duplex capabilites that we do not want */
-+ if (np->current_duplex == full) {
-+ data &= ~(ADVERTISE_10HALF | ADVERTISE_100HALF);
-+ ctrl1000 &= ~(ADVERTISE_1000HALF);
-+ }
-+ else if (np->current_duplex == half) {
-+ data &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL);
-+ ctrl1000 &= ~(ADVERTISE_1000FULL);
-+ }
-+
-+ crisv32_eth_set_mdio_reg(dev, MII_ADVERTISE, data);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ crisv32_eth_set_mdio_reg(dev, MII_CTRL1000, ctrl1000);
-+#endif
-+
-+ /* Renegotiate with link partner */
-+ if (autoneg_normal) {
-+ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR);
-+ data |= BMCR_ANENABLE | BMCR_ANRESTART;
-+ }
-+ crisv32_eth_set_mdio_reg(dev, MII_BMCR, data);
-+}
-+static void
-+crisv32_eth_check_speed(unsigned long idev)
-+{
-+ static int led_initiated = 0;
-+ struct net_device *dev = (struct net_device *) idev;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ unsigned long data;
-+ int old_speed;
-+ unsigned long flags;
-+
-+ BUG_ON(!np);
-+ BUG_ON(!np->transceiver);
-+
-+ spin_lock(&np->transceiver_lock);
-+
-+ old_speed = np->current_speed;
-+ data = crisv32_eth_get_mdio_reg(dev, MII_BMSR);
-+
-+ if (!(data & BMSR_LSTATUS))
-+ np->current_speed = 0;
-+ else
-+ np->transceiver->check_speed(dev);
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ if ((old_speed != np->current_speed)
-+ && ((old_speed == 1000) || (np->current_speed == 1000))) {
-+ /* Switch between mii and gmii */
-+ reg_eth_rw_gen_ctrl gen_ctrl = REG_RD(eth, np->eth_inst,
-+ rw_gen_ctrl);
-+ reg_eth_rw_tr_ctrl tr_ctrl = REG_RD(eth, np->eth_inst,
-+ rw_tr_ctrl);
-+ if (old_speed == 1000) {
-+ gen_ctrl.phy = regk_eth_mii;
-+ gen_ctrl.gtxclk_out = regk_eth_no;
-+ tr_ctrl.carrier_ext = regk_eth_no;
-+ }
-+ else {
-+ gen_ctrl.phy = regk_eth_gmii;
-+ gen_ctrl.gtxclk_out = regk_eth_yes;
-+ tr_ctrl.carrier_ext = regk_eth_yes;
-+ }
-+ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl);
-+ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl);
-+
-+ crisv32_eth_switch_intmem_usage(dev);
-+ }
-+#endif
-+
-+ spin_lock_irqsave(&np->leds->led_lock, flags);
-+ if ((old_speed != np->current_speed) || !led_initiated) {
-+ led_initiated = 1;
-+ np->leds->clear_led_timer.data = (unsigned long) dev;
-+ if (np->current_speed) {
-+ netif_carrier_on(dev);
-+ crisv32_set_network_leds(LED_LINK, dev);
-+ } else {
-+ netif_carrier_off(dev);
-+ crisv32_set_network_leds(LED_NOLINK, dev);
-+ }
-+ }
-+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+
-+ /* Reinitialize the timer. */
-+ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL;
-+ add_timer(&np->speed_timer);
-+
-+ spin_unlock(&np->transceiver_lock);
-+}
-+
-+static void
-+crisv32_eth_set_speed(struct net_device *dev, unsigned long speed)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ spin_lock(&np->transceiver_lock);
-+ if (np->current_speed_selection != speed) {
-+ np->current_speed_selection = speed;
-+ crisv32_eth_negotiate(dev);
-+ }
-+ spin_unlock(&np->transceiver_lock);
-+}
-+
-+static void
-+crisv32_eth_check_duplex(unsigned long idev)
-+{
-+ struct net_device *dev = (struct net_device *) idev;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ reg_eth_rw_rec_ctrl rec_ctrl;
-+ int old_duplex = np->full_duplex;
-+
-+ np->transceiver->check_duplex(dev);
-+
-+ if (old_duplex != np->full_duplex) {
-+ /* Duplex changed. */
-+ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst,
-+ rw_rec_ctrl);
-+ rec_ctrl.duplex = np->full_duplex;
-+ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl);
-+ }
-+
-+ /* Reinitialize the timer. */
-+ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL;
-+ add_timer(&np->duplex_timer);
-+}
-+
-+static void
-+crisv32_eth_set_duplex(struct net_device *dev, enum duplex new_duplex)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ spin_lock(&np->transceiver_lock);
-+ if (np->current_duplex != new_duplex) {
-+ np->current_duplex = new_duplex;
-+ crisv32_eth_negotiate(dev);
-+ }
-+ spin_unlock(&np->transceiver_lock);
-+}
-+
-+static int
-+crisv32_eth_probe_transceiver(struct net_device *dev)
-+{
-+ unsigned int phyid_high;
-+ unsigned int phyid_low;
-+ unsigned int oui;
-+ struct transceiver_ops *ops = NULL;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* Probe MDIO physical address. */
-+ for (np->mdio_phy_addr = 0;
-+ np->mdio_phy_addr <= 31; np->mdio_phy_addr++) {
-+ if (crisv32_eth_get_mdio_reg(dev, MII_BMSR) != 0xffff)
-+ break;
-+ }
-+
-+ if (np->mdio_phy_addr == 32)
-+ return -ENODEV;
-+
-+ /* Get manufacturer. */
-+ phyid_high = crisv32_eth_get_mdio_reg(dev, MII_PHYSID1);
-+ phyid_low = crisv32_eth_get_mdio_reg(dev, MII_PHYSID2);
-+
-+ oui = (phyid_high << 6) | (phyid_low >> 10);
-+
-+ for (ops = &transceivers[0]; ops->oui; ops++) {
-+ if (ops->oui == oui)
-+ break;
-+ }
-+
-+ np->transceiver = ops;
-+ return 0;
-+}
-+
-+static void
-+generic_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE);
-+ if ((data & ADVERTISE_100FULL) ||
-+ (data & ADVERTISE_100HALF))
-+ np->current_speed = 100;
-+ else
-+ np->current_speed = 10;
-+}
-+
-+static void
-+generic_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE);
-+ if ((data & ADVERTISE_10FULL) ||
-+ (data & ADVERTISE_100FULL))
-+ np->full_duplex = 1;
-+ else
-+ np->full_duplex = 0;
-+}
-+
-+static void
-+broadcom_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MDIO_AUX_CTRL_STATUS_REG);
-+ np->current_speed = (data & MDIO_BC_SPEED ? 100 : 10);
-+}
-+
-+static void
-+broadcom_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MDIO_AUX_CTRL_STATUS_REG);
-+ np->full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0;
-+}
-+
-+static void
-+tdk_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MDIO_TDK_DIAGNOSTIC_REG);
-+ np->current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10);
-+}
-+
-+static void
-+tdk_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MDIO_TDK_DIAGNOSTIC_REG);
-+ np->full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0;
-+
-+}
-+
-+static void
-+intel_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ data = crisv32_eth_get_mdio_reg(dev, MDIO_INT_STATUS_REG_2);
-+ np->current_speed = (data & MDIO_INT_SPEED ? 100 : 10);
-+}
-+
-+static void
-+intel_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MDIO_INT_STATUS_REG_2);
-+ np->full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0;
-+}
-+
-+static void
-+national_check_speed(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MDIO_NAT_LINK_AN_REG);
-+ if (data & MDIO_NAT_1000)
-+ np->current_speed = 1000;
-+ else if (data & MDIO_NAT_100)
-+ np->current_speed = 100;
-+ else
-+ np->current_speed = 10;
-+}
-+
-+static void
-+national_check_duplex(struct net_device *dev)
-+{
-+ unsigned long data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MDIO_NAT_LINK_AN_REG);
-+ if (data & MDIO_NAT_FULL_DUPLEX_IND)
-+ np->full_duplex = 1;
-+ else
-+ np->full_duplex = 0;
-+}
-+
-+static void
-+crisv32_eth_reset_tranceiver(struct net_device *dev)
-+{
-+ int i;
-+ unsigned short cmd;
-+ unsigned short data;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR);
-+
-+ cmd = (MDIO_START << 14)
-+ | (MDIO_WRITE << 12)
-+ | (np->mdio_phy_addr << 7)
-+ | (MII_BMCR << 2);
-+
-+ crisv32_eth_send_mdio_cmd(dev, cmd, 1);
-+
-+ data |= 0x8000;
-+
-+ /* Magic value is number of bits. */
-+ for (i = 15; i >= 0; i--)
-+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data));
-+}
-+
-+static unsigned short
-+crisv32_eth_get_mdio_reg(struct net_device *dev, unsigned char reg_num)
-+{
-+ int i;
-+ unsigned short cmd; /* Data to be sent on MDIO port. */
-+ unsigned short data; /* Data read from MDIO. */
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ /* Start of frame, OP Code, Physical Address, Register Address. */
-+ cmd = (MDIO_START << 14)
-+ | (MDIO_READ << 12)
-+ | (np->mdio_phy_addr << 7)
-+ | (reg_num << 2);
-+
-+ crisv32_eth_send_mdio_cmd(dev, cmd, 0);
-+
-+ data = 0;
-+
-+ /* Receive data. Magic value is number of bits. */
-+ for (i = 15; i >= 0; i--)
-+ data |= (crisv32_eth_receive_mdio_bit(dev) << i);
-+
-+ return data;
-+}
-+
-+static void
-+crisv32_eth_set_mdio_reg(struct net_device *dev, unsigned char reg, int value)
-+{
-+ int bitCounter;
-+ unsigned short cmd;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ cmd = (MDIO_START << 14)
-+ | (MDIO_WRITE << 12)
-+ | (np->mdio_phy_addr << 7)
-+ | (reg << 2);
-+
-+ crisv32_eth_send_mdio_cmd(dev, cmd, 1);
-+
-+ /* Data... */
-+ for (bitCounter=15; bitCounter>=0 ; bitCounter--) {
-+ crisv32_eth_send_mdio_bit(dev, GET_BIT(bitCounter, value));
-+ }
-+}
-+
-+static void
-+crisv32_eth_send_mdio_cmd(struct net_device *dev, unsigned short cmd,
-+ int write_cmd)
-+{
-+ int i;
-+ unsigned char data = 0x2;
-+
-+ /* Preamble. Magic value is number of bits. */
-+ for (i = 31; i >= 0; i--)
-+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, MDIO_PREAMBLE));
-+
-+ for (i = 15; i >= 2; i--)
-+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, cmd));
-+
-+ /* Turnaround. */
-+ for (i = 1; i >= 0; i--)
-+ if (write_cmd)
-+ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data));
-+ else
-+ crisv32_eth_receive_mdio_bit(dev);
-+}
-+
-+static void
-+crisv32_eth_send_mdio_bit(struct net_device *dev, unsigned char bit)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ reg_eth_rw_mgm_ctrl mgm_ctrl = {
-+ .mdoe = regk_eth_yes,
-+ .mdio = bit & 1
-+ };
-+
-+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+
-+ udelay(1);
-+
-+ mgm_ctrl.mdc = 1;
-+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+
-+ udelay(1);
-+}
-+
-+static unsigned char
-+crisv32_eth_receive_mdio_bit(struct net_device *dev)
-+{
-+ reg_eth_r_stat stat;
-+ reg_eth_rw_mgm_ctrl mgm_ctrl = {0};
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+
-+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+ stat = REG_RD(eth, np->eth_inst, r_stat);
-+
-+ udelay(1);
-+
-+ mgm_ctrl.mdc = 1;
-+ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl);
-+
-+ udelay(1);
-+ return stat.mdio;
-+}
-+
-+static void
-+crisv32_clear_network_leds(unsigned long priv)
-+{
-+ struct net_device *dev = (struct net_device*)priv;
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&np->leds->led_lock, flags);
-+ if (np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) {
-+ crisv32_set_network_leds(LED_NOACTIVITY, dev);
-+
-+ /* Set the earliest time we may set the LED */
-+ np->leds->led_next_time = jiffies + NET_FLASH_PAUSE;
-+ np->leds->led_active = 0;
-+ }
-+ spin_unlock_irqrestore(&np->leds->led_lock, flags);
-+}
-+
-+static void
-+crisv32_set_network_leds(int active, struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ int light_leds = 0;
-+
-+ if (np->leds->ledgrp == LED_GRP_NONE)
-+ return;
-+
-+ if (active == LED_NOLINK) {
-+ if (dev == crisv32_dev[0])
-+ np->leds->ifisup[0] = 0;
-+ else
-+ np->leds->ifisup[1] = 0;
-+ }
-+ else if (active == LED_LINK) {
-+ if (dev == crisv32_dev[0])
-+ np->leds->ifisup[0] = 1;
-+ else
-+ np->leds->ifisup[1] = 1;
-+#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK)
-+ light_leds = 1;
-+ } else {
-+ light_leds = (active == LED_NOACTIVITY);
-+#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY)
-+ light_leds = 0;
-+ } else {
-+ light_leds = (active == LED_ACTIVITY);
-+#else
-+#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY"
-+#endif
-+ }
-+
-+ if (!use_network_leds) {
-+ NET_LED_SET(np->leds->ledgrp,LED_OFF);
-+ return;
-+ }
-+
-+ if (!np->current_speed) {
-+ /* Set link down if none of the interfaces that use this led group is up */
-+ if ((np->leds->ifisup[0] + np->leds->ifisup[1]) == 0) {
-+#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION)
-+ /* Make LED red, link is down */
-+ NET_LED_SET(np->leds->ledgrp,LED_RED);
-+#else
-+ NET_LED_SET(np->leds->ledgrp,LED_OFF);
-+#endif
-+ }
-+ }
-+ else if (light_leds) {
-+ if (np->current_speed == 10) {
-+ NET_LED_SET(np->leds->ledgrp,LED_ORANGE);
-+ } else {
-+ NET_LED_SET(np->leds->ledgrp,LED_GREEN);
-+ }
-+ }
-+ else {
-+ NET_LED_SET(np->leds->ledgrp,LED_OFF);
-+ }
-+}
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void
-+crisv32_netpoll(struct net_device* netdev)
-+{
-+ crisv32rx_eth_interrupt(DMA0_INTR_VECT, netdev, NULL);
-+}
-+#endif
-+
-+#ifdef CONFIG_CPU_FREQ
-+static int
-+crisv32_ethernet_freq_notifier(struct notifier_block *nb,
-+ unsigned long val, void *data)
-+{
-+ struct cpufreq_freqs *freqs = data;
-+ if (val == CPUFREQ_POSTCHANGE) {
-+ int i;
-+ for (i = 0; i < 2; i++) {
-+ struct net_device* dev = crisv32_dev[i];
-+ unsigned short data;
-+ if (dev == NULL)
-+ continue;
-+
-+ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR);
-+ if (freqs->new == 200000)
-+ data &= ~BMCR_PDOWN;
-+ else
-+ data |= BMCR_PDOWN;
-+ crisv32_eth_set_mdio_reg(dev, MII_BMCR, data);
-+ }
-+ }
-+ return 0;
-+}
-+#endif
-+
-+/*
-+ * Must be called with the np->lock held.
-+ */
-+static void crisv32_ethernet_bug(struct net_device *dev)
-+{
-+ struct crisv32_ethernet_local *np = netdev_priv(dev);
-+ dma_descr_data *dma_pos;
-+ dma_descr_data *in_dma_pos;
-+ reg_dma_rw_stat stat = {0};
-+ reg_dma_rw_stat in_stat = {0};
-+ int i;
-+
-+ /* Get the current output dma position. */
-+ stat = REG_RD(dma, np->dma_out_inst, rw_stat);
-+ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, rw_data));
-+ in_stat = REG_RD(dma, np->dma_in_inst, rw_stat);
-+ in_dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_in_inst, rw_data));
-+
-+ printk("%s:\n"
-+ "stat.list_state=%x\n"
-+ "stat.mode=%x\n"
-+ "stat.stream_cmd_src=%x\n"
-+ "dma_pos=%x\n"
-+ "in_stat.list_state=%x\n"
-+ "in_stat.mode=%x\n"
-+ "in_stat.stream_cmd_src=%x\n"
-+ "in_dma_pos=%x\n"
-+ "catch=%x active=%x\n"
-+ "packets=%d queue=%d\n"
-+ "intr_vect.r_vect=%x\n"
-+ "dma.r_masked_intr=%x dma.rw_ack_intr=%x "
-+ "dma.r_intr=%x dma.rw_intr_masked=%x\n"
-+ "eth.r_stat=%x\n",
-+ __func__,
-+ stat.list_state, stat.mode, stat.stream_cmd_src,
-+ (unsigned int)dma_pos,
-+ in_stat.list_state, in_stat.mode, in_stat.stream_cmd_src,
-+ (unsigned int)in_dma_pos,
-+ (unsigned int)&np->catch_tx_desc->descr,
-+ (unsigned int)&np->active_tx_desc->descr,
-+ np->txpackets,
-+ netif_queue_stopped(dev),
-+ REG_RD_INT(intr_vect, regi_irq, r_vect),
-+ REG_RD_INT(dma, np->dma_out_inst, r_masked_intr),
-+ REG_RD_INT(dma, np->dma_out_inst, rw_ack_intr),
-+ REG_RD_INT(dma, np->dma_out_inst, r_intr),
-+ REG_RD_INT(dma, np->dma_out_inst, rw_intr_mask),
-+ REG_RD_INT(eth, np->eth_inst, r_stat));
-+
-+ printk("tx-descriptors:\n");
-+ for (i = 0; i < NBR_TX_DESC; i++) {
-+ printk("txdesc[%d]=0x%x\n", i, (unsigned int)
-+ virt_to_phys(&np->dma_tx_descr_list[i].descr));
-+ printk("txdesc[%d].skb=0x%x\n", i,
-+ (unsigned int)np->dma_tx_descr_list[i].skb);
-+ printk("txdesc[%d].buf=0x%x\n", i,
-+ (unsigned int)np->dma_tx_descr_list[i].descr.buf);
-+ printk("txdesc[%d].after=0x%x\n", i,
-+ (unsigned int)np->dma_tx_descr_list[i].descr.after);
-+ printk("txdesc[%d].intr=%x\n", i,
-+ np->dma_tx_descr_list[i].descr.intr);
-+ printk("txdesc[%d].eol=%x\n", i,
-+ np->dma_tx_descr_list[i].descr.eol);
-+ printk("txdesc[%d].out_eop=%x\n", i,
-+ np->dma_tx_descr_list[i].descr.out_eop);
-+ printk("txdesc[%d].wait=%x\n", i,
-+ np->dma_tx_descr_list[i].descr.wait);
-+ }
-+}
-+
-+
-+static int
-+crisv32_init_module(void)
-+{
-+ return crisv32_ethernet_init();
-+}
-+
-+module_init(crisv32_init_module);
-diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v32.h linux-2.6.19.2.dev/drivers/net/cris/eth_v32.h
---- linux-2.6.19.2.orig/drivers/net/cris/eth_v32.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/drivers/net/cris/eth_v32.h 2007-02-06 11:10:37.000000000 +0100
-@@ -0,0 +1,248 @@
-+/*
-+ * Definitions for ETRAX FS ethernet driver.
-+ *
-+ * Copyright (C) 2003, 2004, 2005 Axis Communications.
-+ */
-+
-+#ifndef _ETRAX_ETHERNET_H_
-+#define _ETRAX_ETHERNET_H_
-+
-+#include <asm/arch/hwregs/dma.h>
-+
-+
-+#define MAX_MEDIA_DATA_SIZE 1522 /* Max packet size. */
-+
-+#define NBR_RX_DESC 64 /* Number of RX descriptors. */
-+#define NBR_TX_DESC 16 /* Number of TX descriptors. */
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+#define NBR_INTMEM_RX_DESC 5 /* Number of RX descriptors in int. mem.
-+ * when running in gigabit mode.
-+ * Should be less then NBR_RX_DESC
-+ */
-+#define NBR_INTMEM_TX_BUF 4 /* Number of TX buffers in int. mem
-+ * when running in gigabit mode.
-+ * Should be less than NBR_TX_DESC
-+ */
-+#endif
-+
-+/* Large packets are sent directly to upper layers while small packets
-+ * are copied (to reduce memory waste). The following constant
-+ * decides the breakpoint.
-+ */
-+#define RX_COPYBREAK (256)
-+
-+#define ETHER_HEAD_LEN (14)
-+
-+/*
-+** MDIO constants.
-+*/
-+#define MDIO_START 0x1
-+#define MDIO_READ 0x2
-+#define MDIO_WRITE 0x1
-+#define MDIO_PREAMBLE 0xfffffffful
-+
-+/* Broadcom specific */
-+#define MDIO_AUX_CTRL_STATUS_REG 0x18
-+#define MDIO_BC_FULL_DUPLEX_IND 0x1
-+#define MDIO_BC_SPEED 0x2
-+
-+/* TDK specific */
-+#define MDIO_TDK_DIAGNOSTIC_REG 18
-+#define MDIO_TDK_DIAGNOSTIC_RATE 0x400
-+#define MDIO_TDK_DIAGNOSTIC_DPLX 0x800
-+
-+/*Intel LXT972A specific*/
-+#define MDIO_INT_STATUS_REG_2 0x0011
-+#define MDIO_INT_FULL_DUPLEX_IND ( 0x0001 << 9 )
-+#define MDIO_INT_SPEED ( 0x0001 << 14 )
-+
-+/*National Semiconductor DP83865 specific*/
-+#define MDIO_NAT_LINK_AN_REG 0x11
-+#define MDIO_NAT_1000 (0x0001 << 4)
-+#define MDIO_NAT_100 (0x0001 << 3)
-+#define MDIO_NAT_FULL_DUPLEX_IND (0x0001 << 1)
-+
-+/* Network flash constants */
-+#define NET_FLASH_TIME (HZ/50) /* 20 ms */
-+#define NET_FLASH_PAUSE (HZ/100) /* 10 ms */
-+#define NET_LINK_UP_CHECK_INTERVAL (2*HZ) /* 2 seconds. */
-+#define NET_DUPLEX_CHECK_INTERVAL (2*HZ) /* 2 seconds. */
-+
-+/* Duplex settings. */
-+enum duplex {
-+ half,
-+ full,
-+ autoneg
-+};
-+
-+/* Some transceivers requires special handling. */
-+struct transceiver_ops {
-+ unsigned int oui;
-+ void (*check_speed) (struct net_device * dev);
-+ void (*check_duplex) (struct net_device * dev);
-+};
-+
-+typedef struct crisv32_eth_descr {
-+ dma_descr_data descr __attribute__ ((__aligned__(32)));
-+ struct sk_buff *skb;
-+ unsigned char *linearized_packet;
-+} crisv32_eth_descr;
-+
-+
-+
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+struct tx_buffer_list {
-+ struct tx_buffer_list *next;
-+ unsigned char *buf;
-+ char free;
-+};
-+#endif
-+
-+/* LED stuff */
-+#define LED_GRP_0 0
-+#define LED_GRP_1 1
-+#define LED_GRP_NONE 2
-+
-+#define LED_ACTIVITY 0
-+#define LED_NOACTIVITY 1
-+#define LED_LINK 2
-+#define LED_NOLINK 3
-+
-+struct crisv32_eth_leds {
-+ unsigned int ledgrp;
-+ int led_active;
-+ unsigned long led_next_time;
-+ struct timer_list clear_led_timer;
-+ spinlock_t led_lock; /* Protect LED state */
-+ int ifisup[2];
-+};
-+
-+#define NET_LED_SET(x,y) \
-+ do { \
-+ if (x == 0) LED_NETWORK_GRP0_SET(y); \
-+ if (x == 1) LED_NETWORK_GRP1_SET(y); \
-+ } while (0)
-+
-+/* Information that need to be kept for each device. */
-+struct crisv32_ethernet_local {
-+ dma_descr_context ctxt_in __attribute__ ((__aligned__(32)));
-+ dma_descr_context ctxt_out __attribute__ ((__aligned__(32)));
-+
-+ crisv32_eth_descr *active_rx_desc;
-+ crisv32_eth_descr *prev_rx_desc;
-+ crisv32_eth_descr *last_rx_desc;
-+
-+ crisv32_eth_descr *active_tx_desc;
-+ crisv32_eth_descr *prev_tx_desc;
-+ crisv32_eth_descr *catch_tx_desc;
-+
-+ crisv32_eth_descr dma_rx_descr_list[NBR_RX_DESC];
-+ crisv32_eth_descr dma_tx_descr_list[NBR_TX_DESC];
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+ struct tx_buffer_list tx_intmem_buf_list[NBR_INTMEM_TX_BUF];
-+ struct tx_buffer_list *intmem_tx_buf_active;
-+ struct tx_buffer_list *intmem_tx_buf_catch;
-+ char gigabit_mode;
-+#endif
-+ char new_rx_package;
-+
-+ /* DMA and ethernet registers for the device. */
-+ int eth_inst;
-+ int dma_in_inst;
-+ int dma_out_inst;
-+
-+ /* Network speed indication. */
-+ struct timer_list speed_timer;
-+ int current_speed; /* Speed read from tranceiver */
-+ int current_speed_selection; /* Speed selected by user */
-+ int sender_started;
-+ int txpackets;
-+
-+ struct crisv32_eth_leds *leds;
-+
-+ /* Duplex. */
-+ struct timer_list duplex_timer;
-+ int full_duplex;
-+ enum duplex current_duplex;
-+
-+ struct net_device_stats stats;
-+
-+ /* Transciever address. */
-+ unsigned int mdio_phy_addr;
-+
-+ struct transceiver_ops *transceiver;
-+
-+ /*
-+ * TX control lock. This protects the transmit buffer ring state along
-+ * with the "tx full" state of the driver. This means all netif_queue
-+ * flow control actions are protected by this lock as well.
-+ */
-+ spinlock_t lock;
-+ spinlock_t transceiver_lock; /* Protect transceiver state. */
-+};
-+
-+/* Function prototypes. */
-+static int crisv32_ethernet_init(void);
-+static int crisv32_ethernet_device_init(struct net_device* dev);
-+static int crisv32_eth_open(struct net_device *dev);
-+static int crisv32_eth_close(struct net_device *dev);
-+static int crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr);
-+static irqreturn_t crisv32rx_eth_interrupt(int irq, void *dev_id);
-+static irqreturn_t crisv32tx_eth_interrupt(int irq, void *dev_id);
-+static irqreturn_t crisv32nw_eth_interrupt(int irq, void *dev_id);
-+static void crisv32_eth_receive_packet(struct net_device *dev);
-+static int crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev);
-+static void crisv32_eth_hw_send_packet(unsigned char *buf, int length,
-+ void *priv);
-+static void crisv32_eth_tx_timeout(struct net_device *dev);
-+static void crisv32_eth_set_multicast_list(struct net_device *dev);
-+static int crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr,
-+ int cmd);
-+static int crisv32_eth_set_config(struct net_device* dev, struct ifmap* map);
-+#ifdef CONFIG_CRIS_MACH_ARTPEC3
-+static void crisv32_eth_switch_intmem_usage(struct net_device *dev);
-+#endif
-+static void crisv32_eth_negotiate(struct net_device *dev);
-+static void crisv32_eth_check_speed(unsigned long idev);
-+static void crisv32_eth_set_speed(struct net_device *dev, unsigned long speed);
-+static void crisv32_eth_check_duplex(unsigned long idev);
-+static void crisv32_eth_set_duplex(struct net_device *dev, enum duplex);
-+static int crisv32_eth_probe_transceiver(struct net_device *dev);
-+
-+static struct ethtool_ops crisv32_ethtool_ops;
-+
-+static void generic_check_speed(struct net_device *dev);
-+static void generic_check_duplex(struct net_device *dev);
-+static void broadcom_check_speed(struct net_device *dev);
-+static void broadcom_check_duplex(struct net_device *dev);
-+static void tdk_check_speed(struct net_device *dev);
-+static void tdk_check_duplex(struct net_device *dev);
-+static void intel_check_speed(struct net_device* dev);
-+static void intel_check_duplex(struct net_device *dev);
-+static void national_check_speed(struct net_device* dev);
-+static void national_check_duplex(struct net_device *dev);
-+
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void crisv32_netpoll(struct net_device* dev);
-+#endif
-+
-+static void crisv32_clear_network_leds(unsigned long dummy);
-+static void crisv32_set_network_leds(int active, struct net_device* dev);
-+
-+static void crisv32_eth_reset_tranceiver(struct net_device *dev);
-+static unsigned short crisv32_eth_get_mdio_reg(struct net_device *dev,
-+ unsigned char reg_num);
-+static void crisv32_eth_set_mdio_reg(struct net_device *dev,
-+ unsigned char reg_num,
-+ int val);
-+static void crisv32_eth_send_mdio_cmd(struct net_device *dev,
-+ unsigned short cmd, int write_cmd);
-+static void crisv32_eth_send_mdio_bit(struct net_device *dev,
-+ unsigned char bit);
-+static unsigned char crisv32_eth_receive_mdio_bit(struct net_device *dev);
-+
-+static struct net_device_stats *crisv32_get_stats(struct net_device *dev);
-+static void crisv32_start_dma_out(struct crisv32_ethernet_local* np);
-+
-+
-+#endif /* _ETRAX_ETHERNET_H_ */