strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

SVN-Revision: 8653

1 files changed, 1973 insertions, 0 deletions

diff --git a/target/linux/etrax/patches/cris/010-multi-target-build.patch b/target/linux/etrax/patches/cris/010-multi-target-build.patch
new file mode 100644
index 0000000..9d3a28b
--- /dev/null
+++ b/target/linux/etrax/patches/cris/010-multi-target-build.patch
@@ -0,0 +1,1973 @@
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile	2007-05-28 16:28:34.000000000 +0200
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile	2007-05-28 17:24:26.000000000 +0200
+@@ -5,7 +5,7 @@
+ OBJCOPY = /usr/local/cris/objcopy-cris
+ OBJCOPYFLAGS = -O binary --remove-section=.bss
+ 
+-subdir- := compressed rescue
++subdir- := compressed 
+ targets := Image
+ 
+ $(obj)/Image: vmlinux FORCE
+@@ -14,8 +14,12 @@
+ 
+ $(obj)/compressed/vmlinux: $(obj)/Image FORCE
+ 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
+-	$(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
+ 
+ $(obj)/zImage:  $(obj)/compressed/vmlinux
+ 	@cp $< $@
++	@cp $(obj)/compressed/vmlinux $(obj)/zImage_custom
++	@cp $(obj)/compressed/vmlinux_MCM $(obj)/zImage_MCM 
++	@cp $(obj)/compressed/vmlinux_416 $(obj)/zImage_416 
++	@cp $(obj)/compressed/vmlinux_816 $(obj)/zImage_816 
++	@cp $(obj)/compressed/vmlinux_832 $(obj)/zImage_832 
+ 	@echo '  Kernel: $@ is ready'
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile	2007-05-28 16:28:34.000000000 +0200
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile	2007-05-28 17:03:02.000000000 +0200
+@@ -17,18 +17,34 @@
+ 
+ $(obj)/decompress.o: $(OBJECTS) FORCE
+ 	$(call if_changed,ld)
++	$(LD) $(LDFLAGS) arch/cris/boot/compressed/head_MCM.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_MCM.o
++	$(LD) $(LDFLAGS) arch/cris/boot/compressed/head_416.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_416.o
++	$(LD) $(LDFLAGS) arch/cris/boot/compressed/head_816.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_816.o
++	$(LD) $(LDFLAGS) arch/cris/boot/compressed/head_832.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_832.o
+ 
+ $(obj)/decompress.bin: $(obj)/decompress.o FORCE
+ 	$(call if_changed,objcopy)
++	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_MCM.o $(obj)/decompress_MCM.bin
++	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_416.o $(obj)/decompress_416.bin
++	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_816.o $(obj)/decompress_816.bin
++	$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_832.o $(obj)/decompress_832.bin
++
++$(obj)/head.o: $(obj)/head.S .config FORCE
++	/usr/local/cris/gcc-cris -melf -Iinclude  -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c $< -o $@
++	/usr/local/cris/gcc-cris -melf -Iinclude  -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_MCM.S -o arch/cris/boot/compressed/head_MCM.o
++	/usr/local/cris/gcc-cris -melf -Iinclude  -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_416.S -o arch/cris/boot/compressed/head_416.o
++	/usr/local/cris/gcc-cris -melf -Iinclude  -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_816.S -o arch/cris/boot/compressed/head_816.o
++	/usr/local/cris/gcc-cris -melf -Iinclude  -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_832.S -o arch/cris/boot/compressed/head_832.o
+ 
+-$(obj)/head.o: $(obj)/head.S .config
+-	/usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__ASSEMBLY__ -traditional -c $< -o $@
+-
+-$(obj)/misc.o: $(obj)/misc.c .config
++$(obj)/misc.o: $(obj)/misc.c .config FORCE
+ 	/usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__KERNEL__ -c $< -o $@
+ 
+ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
+ 	$(call if_changed,image)
++	cat $(obj)/decompress_MCM.bin $(obj)/piggy.gz >  $(obj)/vmlinux_MCM
++	cat $(obj)/decompress_416.bin $(obj)/piggy.gz >  $(obj)/vmlinux_416
++	cat $(obj)/decompress_816.bin $(obj)/piggy.gz >  $(obj)/vmlinux_816
++	cat $(obj)/decompress_832.bin $(obj)/piggy.gz >  $(obj)/vmlinux_832
+ 
+ $(obj)/piggy.gz: $(obj)/../Image FORCE
+ 	$(call if_changed,gzip)
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init.S	2007-05-28 16:42:15.000000000 +0200
+@@ -0,0 +1,207 @@
++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
++ * 
++ * DRAM/SDRAM initialization - alter with care
++ * This file is intended to be included from other assembler files
++ *
++ * Note: This file may not modify r9 because r9 is used to carry
++ *       information from the decompresser to the kernel
++ *
++ * Copyright (C) 2000, 2001 Axis Communications AB
++ *
++ * Authors:  Mikael Starvik (starvik@axis.com)	
++ * 
++ * $Log: dram_init.S,v $
++ * Revision 1.5  2006/10/13 12:43:11  starvik
++ * Merge of 2.6.18
++ *
++ * Revision 1.4  2003/09/22 09:21:59  starvik
++ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
++ * so we need to mask off 12 bits.
++ *
++ * Revision 1.3  2003/03/31 09:38:37  starvik
++ * Corrected calculation of end of sdram init commands
++ *
++ * Revision 1.2  2002/11/19 13:33:29  starvik
++ * Changes from Linux 2.4
++ *
++ * Revision 1.13  2002/10/30 07:42:28  starvik
++ * Always read SDRAM command sequence from flash
++ *
++ * Revision 1.12  2002/08/09 11:37:37  orjanf
++ * Added double initialization work-around for Samsung SDRAMs.
++ *
++ * Revision 1.11  2002/06/04 11:43:21  starvik
++ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
++ *
++ * Revision 1.10  2001/10/04 12:00:21  martinnn
++ * Added missing underscores.
++ *
++ * Revision 1.9  2001/10/01 14:47:35  bjornw
++ * Added register prefixes and removed underscores
++ *
++ * Revision 1.8  2001/05/15 07:12:45  hp
++ * Copy warning from head.S about r8 and r9
++ *
++ * Revision 1.7  2001/04/18 12:05:39  bjornw
++ * Fixed comments, and explicitely include config.h to be sure its there
++ *
++ * Revision 1.6  2001/04/10 06:20:16  starvik
++ * Delay should be 200us, not 200ns
++ *
++ * Revision 1.5  2001/04/09 06:01:13  starvik
++ * Added support for 100 MHz SDRAMs
++ *
++ * Revision 1.4  2001/03/26 14:24:01  bjornw
++ * Namechange of some config options
++ *
++ * Revision 1.3  2001/03/23 08:29:41  starvik
++ * Corrected calculation of mrs_data
++ *
++ * Revision 1.2  2001/02/08 15:20:00  starvik
++ * Corrected SDRAM initialization
++ * Should now be included as inline
++ *
++ * Revision 1.1  2001/01/29 13:08:02  starvik
++ * Initial version
++ * This file should be included from all assembler files that needs to
++ * initialize DRAM/SDRAM.
++ *
++ */
++
++/* Just to be certain the config file is included, we include it here
++ * explicitely instead of depending on it being included in the file that
++ * uses this code.
++ */
++
++
++	;; WARNING! The registers r8 and r9 are used as parameters carrying
++	;; information from the decompressor (if the kernel was compressed). 
++	;; They should not be used in the code below.
++
++#ifndef CONFIG_SVINTO_SIM	
++	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
++	move.d   $r0, [R_WAITSTATES]
++
++	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
++	move.d   $r0, [R_BUS_CONFIG]
++	
++#ifndef CONFIG_ETRAX_SDRAM
++	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
++	move.d   $r0, [R_DRAM_CONFIG]
++
++	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
++	move.d   $r0, [R_DRAM_TIMING]
++#else
++	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
++	moveq    2, $r6	
++_sdram_init:
++	
++	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
++	
++	; Bank configuration
++	move.d   CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r0
++	move.d   $r0, [R_SDRAM_CONFIG]
++
++	; Calculate value of mrs_data 
++	; CAS latency = 2 && bus_width = 32 => 0x40
++	; CAS latency = 3 && bus_width = 32 => 0x60
++	; CAS latency = 2 && bus_width = 16 => 0x20
++	; CAS latency = 3 && bus_width = 16 => 0x30
++
++	; Check if value is already supplied in kernel config
++	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r2
++	and.d    0x00ff0000, $r2
++	bne	 _set_timing
++	lsrq     16, $r2
++	
++	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
++	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
++	move.d   $r1, $r3
++ 	and.d    0x03, $r1       ; Get CAS latency
++	and.d    0x1000, $r3     ; 50 or 100 MHz?
++	beq      _speed_50
++	nop
++_speed_100:		
++	cmp.d    0x00, $r1	; CAS latency = 2?
++	beq      _bw_check
++	nop
++	or.d     0x20, $r2	; CAS latency = 3 
++	ba       _bw_check
++	nop
++_speed_50:			
++	cmp.d    0x01, $r1	; CAS latency = 2?
++	beq      _bw_check
++	nop
++	or.d     0x20, $r2       ; CAS latency = 3
++_bw_check:
++	move.d   CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r1
++	and.d    0x800000, $r1	; DRAM width is bit 23
++	bne      _set_timing
++	nop
++	lsrq     1, $r2		;  16 bits. Shift down value.
++
++	; Set timing parameters. Starts master clock
++_set_timing:
++	move.d   CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1
++	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
++	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
++	move.d   $r1, $r5
++	or.d     0x0000c000, $r1 ; ref = disable
++	lslq     16, $r2		; mrs data starts at bit 16
++	or.d     $r2, $r1 
++	move.d   $r1, [R_SDRAM_TIMING]	
++		
++	; Wait 200us
++	move.d   10000, $r2
++1:	bne      1b
++	subq     1, $r2
++	
++	; Issue initialization command sequence
++	move.d   _sdram_commands_start, $r2
++	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
++	move.d   _sdram_commands_end,  $r3
++	and.d    0x000fffff, $r3
++1:	clear.d  $r4
++	move.b   [$r2+], $r4
++	lslq     9, $r4	; Command starts at bit 9
++	or.d     $r1, $r4
++	move.d   $r4, [R_SDRAM_TIMING]
++	nop		; Wait five nop cycles between each command
++	nop
++	nop
++	nop
++	nop
++	cmp.d    $r2, $r3
++	bne      1b
++	nop
++	move.d   $r5, [R_SDRAM_TIMING]
++	subq     1, $r6
++	bne      _sdram_init
++	nop
++	ba       _sdram_commands_end
++	nop
++
++_sdram_commands_start:
++	.byte   3	; Precharge
++	.byte   0       ; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   1	; mrs
++	.byte   0	; nop 
++_sdram_commands_end:		
++#endif
++#endif
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_416.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_416.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_416.S	2007-05-28 20:02:25.000000000 +0200
+@@ -0,0 +1,207 @@
++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
++ * 
++ * DRAM/SDRAM initialization - alter with care
++ * This file is intended to be included from other assembler files
++ *
++ * Note: This file may not modify r9 because r9 is used to carry
++ *       information from the decompresser to the kernel
++ *
++ * Copyright (C) 2000, 2001 Axis Communications AB
++ *
++ * Authors:  Mikael Starvik (starvik@axis.com)	
++ * 
++ * $Log: dram_init.S,v $
++ * Revision 1.5  2006/10/13 12:43:11  starvik
++ * Merge of 2.6.18
++ *
++ * Revision 1.4  2003/09/22 09:21:59  starvik
++ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
++ * so we need to mask off 12 bits.
++ *
++ * Revision 1.3  2003/03/31 09:38:37  starvik
++ * Corrected calculation of end of sdram init commands
++ *
++ * Revision 1.2  2002/11/19 13:33:29  starvik
++ * Changes from Linux 2.4
++ *
++ * Revision 1.13  2002/10/30 07:42:28  starvik
++ * Always read SDRAM command sequence from flash
++ *
++ * Revision 1.12  2002/08/09 11:37:37  orjanf
++ * Added double initialization work-around for Samsung SDRAMs.
++ *
++ * Revision 1.11  2002/06/04 11:43:21  starvik
++ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
++ *
++ * Revision 1.10  2001/10/04 12:00:21  martinnn
++ * Added missing underscores.
++ *
++ * Revision 1.9  2001/10/01 14:47:35  bjornw
++ * Added register prefixes and removed underscores
++ *
++ * Revision 1.8  2001/05/15 07:12:45  hp
++ * Copy warning from head.S about r8 and r9
++ *
++ * Revision 1.7  2001/04/18 12:05:39  bjornw
++ * Fixed comments, and explicitely include config.h to be sure its there
++ *
++ * Revision 1.6  2001/04/10 06:20:16  starvik
++ * Delay should be 200us, not 200ns
++ *
++ * Revision 1.5  2001/04/09 06:01:13  starvik
++ * Added support for 100 MHz SDRAMs
++ *
++ * Revision 1.4  2001/03/26 14:24:01  bjornw
++ * Namechange of some config options
++ *
++ * Revision 1.3  2001/03/23 08:29:41  starvik
++ * Corrected calculation of mrs_data
++ *
++ * Revision 1.2  2001/02/08 15:20:00  starvik
++ * Corrected SDRAM initialization
++ * Should now be included as inline
++ *
++ * Revision 1.1  2001/01/29 13:08:02  starvik
++ * Initial version
++ * This file should be included from all assembler files that needs to
++ * initialize DRAM/SDRAM.
++ *
++ */
++
++/* Just to be certain the config file is included, we include it here
++ * explicitely instead of depending on it being included in the file that
++ * uses this code.
++ */
++
++
++	;; WARNING! The registers r8 and r9 are used as parameters carrying
++	;; information from the decompressor (if the kernel was compressed). 
++	;; They should not be used in the code below.
++
++#ifndef CONFIG_SVINTO_SIM	
++	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
++	move.d   $r0, [R_WAITSTATES]
++
++	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
++	move.d   $r0, [R_BUS_CONFIG]
++	
++#ifndef CONFIG_ETRAX_SDRAM
++	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
++	move.d   $r0, [R_DRAM_CONFIG]
++
++	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
++	move.d   $r0, [R_DRAM_TIMING]
++#else
++	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
++	moveq    2, $r6	
++_sdram_init:
++	
++	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
++	
++	; Bank configuration
++	move.d   0x09603636, $r0
++	move.d   $r0, [R_SDRAM_CONFIG]
++
++	; Calculate value of mrs_data 
++	; CAS latency = 2 && bus_width = 32 => 0x40
++	; CAS latency = 3 && bus_width = 32 => 0x60
++	; CAS latency = 2 && bus_width = 16 => 0x20
++	; CAS latency = 3 && bus_width = 16 => 0x30
++
++	; Check if value is already supplied in kernel config
++	move.d   0x80008002, $r2
++	and.d    0x00ff0000, $r2
++	bne	 _set_timing
++	lsrq     16, $r2
++	
++	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
++	move.d   0x80008002, $r1
++	move.d   $r1, $r3
++ 	and.d    0x03, $r1       ; Get CAS latency
++	and.d    0x1000, $r3     ; 50 or 100 MHz?
++	beq      _speed_50
++	nop
++_speed_100:		
++	cmp.d    0x00, $r1	; CAS latency = 2?
++	beq      _bw_check
++	nop
++	or.d     0x20, $r2	; CAS latency = 3 
++	ba       _bw_check
++	nop
++_speed_50:			
++	cmp.d    0x01, $r1	; CAS latency = 2?
++	beq      _bw_check
++	nop
++	or.d     0x20, $r2       ; CAS latency = 3
++_bw_check:
++	move.d   0x09603636, $r1
++	and.d    0x800000, $r1	; DRAM width is bit 23
++	bne      _set_timing
++	nop
++	lsrq     1, $r2		;  16 bits. Shift down value.
++
++	; Set timing parameters. Starts master clock
++_set_timing:
++	move.d   0x80008002, $r1
++	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
++	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
++	move.d   $r1, $r5
++	or.d     0x0000c000, $r1 ; ref = disable
++	lslq     16, $r2		; mrs data starts at bit 16
++	or.d     $r2, $r1 
++	move.d   $r1, [R_SDRAM_TIMING]	
++		
++	; Wait 200us
++	move.d   10000, $r2
++1:	bne      1b
++	subq     1, $r2
++	
++	; Issue initialization command sequence
++	move.d   _sdram_commands_start, $r2
++	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
++	move.d   _sdram_commands_end,  $r3
++	and.d    0x000fffff, $r3
++1:	clear.d  $r4
++	move.b   [$r2+], $r4
++	lslq     9, $r4	; Command starts at bit 9
++	or.d     $r1, $r4
++	move.d   $r4, [R_SDRAM_TIMING]
++	nop		; Wait five nop cycles between each command
++	nop
++	nop
++	nop
++	nop
++	cmp.d    $r2, $r3
++	bne      1b
++	nop
++	move.d   $r5, [R_SDRAM_TIMING]
++	subq     1, $r6
++	bne      _sdram_init
++	nop
++	ba       _sdram_commands_end
++	nop
++
++_sdram_commands_start:
++	.byte   3	; Precharge
++	.byte   0       ; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   1	; mrs
++	.byte   0	; nop 
++_sdram_commands_end:		
++#endif
++#endif
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_816.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_816.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_816.S	2007-05-28 20:04:05.000000000 +0200
+@@ -0,0 +1,207 @@
++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
++ * 
++ * DRAM/SDRAM initialization - alter with care
++ * This file is intended to be included from other assembler files
++ *
++ * Note: This file may not modify r9 because r9 is used to carry
++ *       information from the decompresser to the kernel
++ *
++ * Copyright (C) 2000, 2001 Axis Communications AB
++ *
++ * Authors:  Mikael Starvik (starvik@axis.com)	
++ * 
++ * $Log: dram_init.S,v $
++ * Revision 1.5  2006/10/13 12:43:11  starvik
++ * Merge of 2.6.18
++ *
++ * Revision 1.4  2003/09/22 09:21:59  starvik
++ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
++ * so we need to mask off 12 bits.
++ *
++ * Revision 1.3  2003/03/31 09:38:37  starvik
++ * Corrected calculation of end of sdram init commands
++ *
++ * Revision 1.2  2002/11/19 13:33:29  starvik
++ * Changes from Linux 2.4
++ *
++ * Revision 1.13  2002/10/30 07:42:28  starvik
++ * Always read SDRAM command sequence from flash
++ *
++ * Revision 1.12  2002/08/09 11:37:37  orjanf
++ * Added double initialization work-around for Samsung SDRAMs.
++ *
++ * Revision 1.11  2002/06/04 11:43:21  starvik
++ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
++ *
++ * Revision 1.10  2001/10/04 12:00:21  martinnn
++ * Added missing underscores.
++ *
++ * Revision 1.9  2001/10/01 14:47:35  bjornw
++ * Added register prefixes and removed underscores
++ *
++ * Revision 1.8  2001/05/15 07:12:45  hp
++ * Copy warning from head.S about r8 and r9
++ *
++ * Revision 1.7  2001/04/18 12:05:39  bjornw
++ * Fixed comments, and explicitely include config.h to be sure its there
++ *
++ * Revision 1.6  2001/04/10 06:20:16  starvik
++ * Delay should be 200us, not 200ns
++ *
++ * Revision 1.5  2001/04/09 06:01:13  starvik
++ * Added support for 100 MHz SDRAMs
++ *
++ * Revision 1.4  2001/03/26 14:24:01  bjornw
++ * Namechange of some config options
++ *
++ * Revision 1.3  2001/03/23 08:29:41  starvik
++ * Corrected calculation of mrs_data
++ *
++ * Revision 1.2  2001/02/08 15:20:00  starvik
++ * Corrected SDRAM initialization
++ * Should now be included as inline
++ *
++ * Revision 1.1  2001/01/29 13:08:02  starvik
++ * Initial version
++ * This file should be included from all assembler files that needs to
++ * initialize DRAM/SDRAM.
++ *
++ */
++
++/* Just to be certain the config file is included, we include it here
++ * explicitely instead of depending on it being included in the file that
++ * uses this code.
++ */
++
++
++	;; WARNING! The registers r8 and r9 are used as parameters carrying
++	;; information from the decompressor (if the kernel was compressed). 
++	;; They should not be used in the code below.
++
++#ifndef CONFIG_SVINTO_SIM	
++	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
++	move.d   $r0, [R_WAITSTATES]
++
++	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
++	move.d   $r0, [R_BUS_CONFIG]
++	
++#ifndef CONFIG_ETRAX_SDRAM
++	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
++	move.d   $r0, [R_DRAM_CONFIG]
++
++	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
++	move.d   $r0, [R_DRAM_TIMING]
++#else
++	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
++	moveq    2, $r6	
++_sdram_init:
++	
++	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
++	
++	; Bank configuration
++	move.d   0x09603636, $r0
++	move.d   $r0, [R_SDRAM_CONFIG]
++
++	; Calculate value of mrs_data 
++	; CAS latency = 2 && bus_width = 32 => 0x40
++	; CAS latency = 3 && bus_width = 32 => 0x60
++	; CAS latency = 2 && bus_width = 16 => 0x20
++	; CAS latency = 3 && bus_width = 16 => 0x30
++
++	; Check if value is already supplied in kernel config
++	move.d   0x80008002, $r2
++	and.d    0x00ff0000, $r2
++	bne	 _set_timing
++	lsrq     16, $r2
++	
++	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
++	move.d   0x80008002, $r1
++	move.d   $r1, $r3
++ 	and.d    0x03, $r1       ; Get CAS latency
++	and.d    0x1000, $r3     ; 50 or 100 MHz?
++	beq      _speed_50
++	nop
++_speed_100:		
++	cmp.d    0x00, $r1	; CAS latency = 2?
++	beq      _bw_check
++	nop
++	or.d     0x20, $r2	; CAS latency = 3 
++	ba       _bw_check
++	nop
++_speed_50:			
++	cmp.d    0x01, $r1	; CAS latency = 2?
++	beq      _bw_check
++	nop
++	or.d     0x20, $r2       ; CAS latency = 3
++_bw_check:
++	move.d   0x09603636, $r1
++	and.d    0x800000, $r1	; DRAM width is bit 23
++	bne      _set_timing
++	nop
++	lsrq     1, $r2		;  16 bits. Shift down value.
++
++	; Set timing parameters. Starts master clock
++_set_timing:
++	move.d   0x80008002, $r1
++	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
++	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
++	move.d   $r1, $r5
++	or.d     0x0000c000, $r1 ; ref = disable
++	lslq     16, $r2		; mrs data starts at bit 16
++	or.d     $r2, $r1 
++	move.d   $r1, [R_SDRAM_TIMING]	
++		
++	; Wait 200us
++	move.d   10000, $r2
++1:	bne      1b
++	subq     1, $r2
++	
++	; Issue initialization command sequence
++	move.d   _sdram_commands_start, $r2
++	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
++	move.d   _sdram_commands_end,  $r3
++	and.d    0x000fffff, $r3
++1:	clear.d  $r4
++	move.b   [$r2+], $r4
++	lslq     9, $r4	; Command starts at bit 9
++	or.d     $r1, $r4
++	move.d   $r4, [R_SDRAM_TIMING]
++	nop		; Wait five nop cycles between each command
++	nop
++	nop
++	nop
++	nop
++	cmp.d    $r2, $r3
++	bne      1b
++	nop
++	move.d   $r5, [R_SDRAM_TIMING]
++	subq     1, $r6
++	bne      _sdram_init
++	nop
++	ba       _sdram_commands_end
++	nop
++
++_sdram_commands_start:
++	.byte   3	; Precharge
++	.byte   0       ; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   1	; mrs
++	.byte   0	; nop 
++_sdram_commands_end:		
++#endif
++#endif
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_832.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_832.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_832.S	2007-05-28 20:04:57.000000000 +0200
+@@ -0,0 +1,207 @@
++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
++ * 
++ * DRAM/SDRAM initialization - alter with care
++ * This file is intended to be included from other assembler files
++ *
++ * Note: This file may not modify r9 because r9 is used to carry
++ *       information from the decompresser to the kernel
++ *
++ * Copyright (C) 2000, 2001 Axis Communications AB
++ *
++ * Authors:  Mikael Starvik (starvik@axis.com)	
++ * 
++ * $Log: dram_init.S,v $
++ * Revision 1.5  2006/10/13 12:43:11  starvik
++ * Merge of 2.6.18
++ *
++ * Revision 1.4  2003/09/22 09:21:59  starvik
++ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
++ * so we need to mask off 12 bits.
++ *
++ * Revision 1.3  2003/03/31 09:38:37  starvik
++ * Corrected calculation of end of sdram init commands
++ *
++ * Revision 1.2  2002/11/19 13:33:29  starvik
++ * Changes from Linux 2.4
++ *
++ * Revision 1.13  2002/10/30 07:42:28  starvik
++ * Always read SDRAM command sequence from flash
++ *
++ * Revision 1.12  2002/08/09 11:37:37  orjanf
++ * Added double initialization work-around for Samsung SDRAMs.
++ *
++ * Revision 1.11  2002/06/04 11:43:21  starvik
++ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
++ *
++ * Revision 1.10  2001/10/04 12:00:21  martinnn
++ * Added missing underscores.
++ *
++ * Revision 1.9  2001/10/01 14:47:35  bjornw
++ * Added register prefixes and removed underscores
++ *
++ * Revision 1.8  2001/05/15 07:12:45  hp
++ * Copy warning from head.S about r8 and r9
++ *
++ * Revision 1.7  2001/04/18 12:05:39  bjornw
++ * Fixed comments, and explicitely include config.h to be sure its there
++ *
++ * Revision 1.6  2001/04/10 06:20:16  starvik
++ * Delay should be 200us, not 200ns
++ *
++ * Revision 1.5  2001/04/09 06:01:13  starvik
++ * Added support for 100 MHz SDRAMs
++ *
++ * Revision 1.4  2001/03/26 14:24:01  bjornw
++ * Namechange of some config options
++ *
++ * Revision 1.3  2001/03/23 08:29:41  starvik
++ * Corrected calculation of mrs_data
++ *
++ * Revision 1.2  2001/02/08 15:20:00  starvik
++ * Corrected SDRAM initialization
++ * Should now be included as inline
++ *
++ * Revision 1.1  2001/01/29 13:08:02  starvik
++ * Initial version
++ * This file should be included from all assembler files that needs to
++ * initialize DRAM/SDRAM.
++ *
++ */
++
++/* Just to be certain the config file is included, we include it here
++ * explicitely instead of depending on it being included in the file that
++ * uses this code.
++ */
++
++
++	;; WARNING! The registers r8 and r9 are used as parameters carrying
++	;; information from the decompressor (if the kernel was compressed). 
++	;; They should not be used in the code below.
++
++#ifndef CONFIG_SVINTO_SIM	
++	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
++	move.d   $r0, [R_WAITSTATES]
++
++	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
++	move.d   $r0, [R_BUS_CONFIG]
++	
++#ifndef CONFIG_ETRAX_SDRAM
++	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
++	move.d   $r0, [R_DRAM_CONFIG]
++
++	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
++	move.d   $r0, [R_DRAM_TIMING]
++#else
++	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
++	moveq    2, $r6	
++_sdram_init:
++	
++	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
++	
++	; Bank configuration
++	move.d   0x09603737, $r0
++	move.d   $r0, [R_SDRAM_CONFIG]
++
++	; Calculate value of mrs_data 
++	; CAS latency = 2 && bus_width = 32 => 0x40
++	; CAS latency = 3 && bus_width = 32 => 0x60
++	; CAS latency = 2 && bus_width = 16 => 0x20
++	; CAS latency = 3 && bus_width = 16 => 0x30
++
++	; Check if value is already supplied in kernel config
++	move.d   0x80008002, $r2
++	and.d    0x00ff0000, $r2
++	bne	 _set_timing
++	lsrq     16, $r2
++	
++	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
++	move.d   0x80008002, $r1
++	move.d   $r1, $r3
++ 	and.d    0x03, $r1       ; Get CAS latency
++	and.d    0x1000, $r3     ; 50 or 100 MHz?
++	beq      _speed_50
++	nop
++_speed_100:		
++	cmp.d    0x00, $r1	; CAS latency = 2?
++	beq      _bw_check
++	nop
++	or.d     0x20, $r2	; CAS latency = 3 
++	ba       _bw_check
++	nop
++_speed_50:			
++	cmp.d    0x01, $r1	; CAS latency = 2?
++	beq      _bw_check
++	nop
++	or.d     0x20, $r2       ; CAS latency = 3
++_bw_check:
++	move.d   0x09603737, $r1
++	and.d    0x800000, $r1	; DRAM width is bit 23
++	bne      _set_timing
++	nop
++	lsrq     1, $r2		;  16 bits. Shift down value.
++
++	; Set timing parameters. Starts master clock
++_set_timing:
++	move.d   0x80008002, $r1
++	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
++	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
++	move.d   $r1, $r5
++	or.d     0x0000c000, $r1 ; ref = disable
++	lslq     16, $r2		; mrs data starts at bit 16
++	or.d     $r2, $r1 
++	move.d   $r1, [R_SDRAM_TIMING]	
++		
++	; Wait 200us
++	move.d   10000, $r2
++1:	bne      1b
++	subq     1, $r2
++	
++	; Issue initialization command sequence
++	move.d   _sdram_commands_start, $r2
++	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
++	move.d   _sdram_commands_end,  $r3
++	and.d    0x000fffff, $r3
++1:	clear.d  $r4
++	move.b   [$r2+], $r4
++	lslq     9, $r4	; Command starts at bit 9
++	or.d     $r1, $r4
++	move.d   $r4, [R_SDRAM_TIMING]
++	nop		; Wait five nop cycles between each command
++	nop
++	nop
++	nop
++	nop
++	cmp.d    $r2, $r3
++	bne      1b
++	nop
++	move.d   $r5, [R_SDRAM_TIMING]
++	subq     1, $r6
++	bne      _sdram_init
++	nop
++	ba       _sdram_commands_end
++	nop
++
++_sdram_commands_start:
++	.byte   3	; Precharge
++	.byte   0       ; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   1	; mrs
++	.byte   0	; nop 
++_sdram_commands_end:		
++#endif
++#endif
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S	2007-05-28 20:03:13.000000000 +0200
+@@ -0,0 +1,207 @@
++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
++ * 
++ * DRAM/SDRAM initialization - alter with care
++ * This file is intended to be included from other assembler files
++ *
++ * Note: This file may not modify r9 because r9 is used to carry
++ *       information from the decompresser to the kernel
++ *
++ * Copyright (C) 2000, 2001 Axis Communications AB
++ *
++ * Authors:  Mikael Starvik (starvik@axis.com)	
++ * 
++ * $Log: dram_init.S,v $
++ * Revision 1.5  2006/10/13 12:43:11  starvik
++ * Merge of 2.6.18
++ *
++ * Revision 1.4  2003/09/22 09:21:59  starvik
++ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
++ * so we need to mask off 12 bits.
++ *
++ * Revision 1.3  2003/03/31 09:38:37  starvik
++ * Corrected calculation of end of sdram init commands
++ *
++ * Revision 1.2  2002/11/19 13:33:29  starvik
++ * Changes from Linux 2.4
++ *
++ * Revision 1.13  2002/10/30 07:42:28  starvik
++ * Always read SDRAM command sequence from flash
++ *
++ * Revision 1.12  2002/08/09 11:37:37  orjanf
++ * Added double initialization work-around for Samsung SDRAMs.
++ *
++ * Revision 1.11  2002/06/04 11:43:21  starvik
++ * Check if mrs_data is specified in kernelconfig (necessary for MCM)
++ *
++ * Revision 1.10  2001/10/04 12:00:21  martinnn
++ * Added missing underscores.
++ *
++ * Revision 1.9  2001/10/01 14:47:35  bjornw
++ * Added register prefixes and removed underscores
++ *
++ * Revision 1.8  2001/05/15 07:12:45  hp
++ * Copy warning from head.S about r8 and r9
++ *
++ * Revision 1.7  2001/04/18 12:05:39  bjornw
++ * Fixed comments, and explicitely include config.h to be sure its there
++ *
++ * Revision 1.6  2001/04/10 06:20:16  starvik
++ * Delay should be 200us, not 200ns
++ *
++ * Revision 1.5  2001/04/09 06:01:13  starvik
++ * Added support for 100 MHz SDRAMs
++ *
++ * Revision 1.4  2001/03/26 14:24:01  bjornw
++ * Namechange of some config options
++ *
++ * Revision 1.3  2001/03/23 08:29:41  starvik
++ * Corrected calculation of mrs_data
++ *
++ * Revision 1.2  2001/02/08 15:20:00  starvik
++ * Corrected SDRAM initialization
++ * Should now be included as inline
++ *
++ * Revision 1.1  2001/01/29 13:08:02  starvik
++ * Initial version
++ * This file should be included from all assembler files that needs to
++ * initialize DRAM/SDRAM.
++ *
++ */
++
++/* Just to be certain the config file is included, we include it here
++ * explicitely instead of depending on it being included in the file that
++ * uses this code.
++ */
++
++
++	;; WARNING! The registers r8 and r9 are used as parameters carrying
++	;; information from the decompressor (if the kernel was compressed). 
++	;; They should not be used in the code below.
++
++#ifndef CONFIG_SVINTO_SIM	
++	move.d   CONFIG_ETRAX_DEF_R_WAITSTATES, $r0
++	move.d   $r0, [R_WAITSTATES]
++
++	move.d   CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0
++	move.d   $r0, [R_BUS_CONFIG]
++	
++#ifndef CONFIG_ETRAX_SDRAM
++	move.d   CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0
++	move.d   $r0, [R_DRAM_CONFIG]
++
++	move.d   CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0
++	move.d   $r0, [R_DRAM_TIMING]
++#else
++	;; Samsung SDRAMs seem to require to be initialized twice to work properly.
++	moveq    2, $r6	
++_sdram_init:
++	
++	; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization
++	
++	; Bank configuration
++	move.d   0x09603636, $r0
++	move.d   $r0, [R_SDRAM_CONFIG]
++
++	; Calculate value of mrs_data 
++	; CAS latency = 2 && bus_width = 32 => 0x40
++	; CAS latency = 3 && bus_width = 32 => 0x60
++	; CAS latency = 2 && bus_width = 16 => 0x20
++	; CAS latency = 3 && bus_width = 16 => 0x30
++
++	; Check if value is already supplied in kernel config
++	move.d   0x80608002, $r2
++	and.d    0x00ff0000, $r2
++	bne	 _set_timing
++	lsrq     16, $r2
++	
++	move.d   0x40, $r2       ; Assume 32 bits and CAS latency = 2
++	move.d   0x80608002, $r1
++	move.d   $r1, $r3
++ 	and.d    0x03, $r1       ; Get CAS latency
++	and.d    0x1000, $r3     ; 50 or 100 MHz?
++	beq      _speed_50
++	nop
++_speed_100:		
++	cmp.d    0x00, $r1	; CAS latency = 2?
++	beq      _bw_check
++	nop
++	or.d     0x20, $r2	; CAS latency = 3 
++	ba       _bw_check
++	nop
++_speed_50:			
++	cmp.d    0x01, $r1	; CAS latency = 2?
++	beq      _bw_check
++	nop
++	or.d     0x20, $r2       ; CAS latency = 3
++_bw_check:
++	move.d   0x09603636, $r1
++	and.d    0x800000, $r1	; DRAM width is bit 23
++	bne      _set_timing
++	nop
++	lsrq     1, $r2		;  16 bits. Shift down value.
++
++	; Set timing parameters. Starts master clock
++_set_timing:
++	move.d   0x80608002, $r1
++	and.d    0x8000f9ff, $r1 ; Make sure mrs data and command is 0 
++	or.d     0x80000000, $r1	; Make sure sdram enable bit is set
++	move.d   $r1, $r5
++	or.d     0x0000c000, $r1 ; ref = disable
++	lslq     16, $r2		; mrs data starts at bit 16
++	or.d     $r2, $r1 
++	move.d   $r1, [R_SDRAM_TIMING]	
++		
++	; Wait 200us
++	move.d   10000, $r2
++1:	bne      1b
++	subq     1, $r2
++	
++	; Issue initialization command sequence
++	move.d   _sdram_commands_start, $r2
++	and.d    0x000fffff, $r2 ; Make sure commands are read from flash
++	move.d   _sdram_commands_end,  $r3
++	and.d    0x000fffff, $r3
++1:	clear.d  $r4
++	move.b   [$r2+], $r4
++	lslq     9, $r4	; Command starts at bit 9
++	or.d     $r1, $r4
++	move.d   $r4, [R_SDRAM_TIMING]
++	nop		; Wait five nop cycles between each command
++	nop
++	nop
++	nop
++	nop
++	cmp.d    $r2, $r3
++	bne      1b
++	nop
++	move.d   $r5, [R_SDRAM_TIMING]
++	subq     1, $r6
++	bne      _sdram_init
++	nop
++	ba       _sdram_commands_end
++	nop
++
++_sdram_commands_start:
++	.byte   3	; Precharge
++	.byte   0       ; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   2	; refresh
++	.byte   0	; nop
++	.byte   1	; mrs
++	.byte   0	; nop 
++_sdram_commands_end:		
++#endif
++#endif
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_416.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_416.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_416.S	2007-05-28 17:16:28.000000000 +0200
+@@ -0,0 +1,126 @@
++/*
++ *  arch/cris/boot/compressed/head.S
++ *
++ *  Copyright (C) 1999, 2001 Axis Communications AB
++ *
++ *  Code that sets up the DRAM registers, calls the
++ *  decompressor to unpack the piggybacked kernel, and jumps.
++ *
++ */
++
++#define ASSEMBLER_MACROS_ONLY
++#include <asm/arch/sv_addr_ag.h>
++
++#define RAM_INIT_MAGIC 0x56902387
++#define COMMAND_LINE_MAGIC 0x87109563
++
++	;; Exported symbols
++	
++	.globl	_input_data
++
++	
++	.text
++
++	nop
++	di
++
++;; We need to initialze DRAM registers before we start using the DRAM
++	
++	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
++	beq	dram_init_finished
++	nop
++	
++#include "dram_init_416.S"
++	
++dram_init_finished:	
++		
++	;; Initiate the PA and PB ports
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
++	move.b   r0, [R_PORT_PA_DATA]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
++	move.b   r0, [R_PORT_PA_DIR]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
++	move.b   r0, [R_PORT_PB_DATA]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
++	move.b   r0, [R_PORT_PB_DIR]
++
++	;; Setup the stack to a suitably high address.
++	;; We assume 8 MB is the minimum DRAM in an eLinux
++	;; product and put the sp at the top for now.
++
++	move.d	0x40800000, sp
++
++	;; Figure out where the compressed piggyback image is
++	;; in the flash (since we wont try to copy it to DRAM
++	;; before unpacking). It is at _edata, but in flash.
++	;; Use (_edata - basse) as offset to the current PC.
++	
++basse:	move.d	pc, r5
++	and.d	0x7fffffff, r5	; strip any non-cache bit
++	subq	2, r5		; compensate for the move.d pc instr
++	move.d	r5, r0		; save for later - flash address of 'basse'
++	add.d	_edata, r5
++	sub.d	basse, r5	; r5 = flash address of '_edata'
++	
++	;; Copy text+data to DRAM
++	
++	move.d	basse, r1	; destination
++	move.d	_edata, r2	; end destination
++1:	move.w	[r0+], r3
++	move.w	r3, [r1+]
++	cmp.d	r2, r1
++	bcs	1b
++	nop
++
++	move.d	r5, [_input_data] ; for the decompressor
++
++
++	;; Clear the decompressors BSS (between _edata and _end)
++	
++	moveq	0, r0
++	move.d	_edata, r1
++	move.d	_end, r2
++1:	move.w	r0, [r1+]
++	cmp.d	r2, r1
++	bcs	1b
++	nop
++
++	;;  Save command line magic and address.
++	move.d	_cmd_line_magic, $r12
++	move.d  $r10, [$r12]
++	move.d	_cmd_line_addr, $r12
++	move.d  $r11, [$r12]
++	
++	;; Do the decompression and save compressed size in _inptr
++
++	jsr	_decompress_kernel
++	
++	;; Put start address of root partition in r9 so the kernel can use it
++	;; when mounting from flash
++
++	move.d	[_input_data], r9	; flash address of compressed kernel
++	add.d	[_inptr], r9		; size of compressed kernel
++
++	;; Restore command line magic and address.
++	move.d  _cmd_line_magic, $r10
++	move.d  [$r10], $r10
++	move.d  _cmd_line_addr, $r11
++	move.d  [$r11], $r11
++
++	;; Enter the decompressed kernel
++	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
++	jump	0x40004000	; kernel is linked to this address
++	
++	.data
++
++_input_data:
++	.dword	0		; used by the decompressor
++_cmd_line_magic:
++	.dword 0
++_cmd_line_addr:
++	.dword 0
++#include "hw_settings_416.S"
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_816.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_816.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_816.S	2007-05-28 17:16:58.000000000 +0200
+@@ -0,0 +1,126 @@
++/*
++ *  arch/cris/boot/compressed/head.S
++ *
++ *  Copyright (C) 1999, 2001 Axis Communications AB
++ *
++ *  Code that sets up the DRAM registers, calls the
++ *  decompressor to unpack the piggybacked kernel, and jumps.
++ *
++ */
++
++#define ASSEMBLER_MACROS_ONLY
++#include <asm/arch/sv_addr_ag.h>
++
++#define RAM_INIT_MAGIC 0x56902387
++#define COMMAND_LINE_MAGIC 0x87109563
++
++	;; Exported symbols
++	
++	.globl	_input_data
++
++	
++	.text
++
++	nop
++	di
++
++;; We need to initialze DRAM registers before we start using the DRAM
++	
++	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
++	beq	dram_init_finished
++	nop
++	
++#include "dram_init_816.S"
++	
++dram_init_finished:	
++		
++	;; Initiate the PA and PB ports
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
++	move.b   r0, [R_PORT_PA_DATA]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
++	move.b   r0, [R_PORT_PA_DIR]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
++	move.b   r0, [R_PORT_PB_DATA]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
++	move.b   r0, [R_PORT_PB_DIR]
++
++	;; Setup the stack to a suitably high address.
++	;; We assume 8 MB is the minimum DRAM in an eLinux
++	;; product and put the sp at the top for now.
++
++	move.d	0x40800000, sp
++
++	;; Figure out where the compressed piggyback image is
++	;; in the flash (since we wont try to copy it to DRAM
++	;; before unpacking). It is at _edata, but in flash.
++	;; Use (_edata - basse) as offset to the current PC.
++	
++basse:	move.d	pc, r5
++	and.d	0x7fffffff, r5	; strip any non-cache bit
++	subq	2, r5		; compensate for the move.d pc instr
++	move.d	r5, r0		; save for later - flash address of 'basse'
++	add.d	_edata, r5
++	sub.d	basse, r5	; r5 = flash address of '_edata'
++	
++	;; Copy text+data to DRAM
++	
++	move.d	basse, r1	; destination
++	move.d	_edata, r2	; end destination
++1:	move.w	[r0+], r3
++	move.w	r3, [r1+]
++	cmp.d	r2, r1
++	bcs	1b
++	nop
++
++	move.d	r5, [_input_data] ; for the decompressor
++
++
++	;; Clear the decompressors BSS (between _edata and _end)
++	
++	moveq	0, r0
++	move.d	_edata, r1
++	move.d	_end, r2
++1:	move.w	r0, [r1+]
++	cmp.d	r2, r1
++	bcs	1b
++	nop
++
++	;;  Save command line magic and address.
++	move.d	_cmd_line_magic, $r12
++	move.d  $r10, [$r12]
++	move.d	_cmd_line_addr, $r12
++	move.d  $r11, [$r12]
++	
++	;; Do the decompression and save compressed size in _inptr
++
++	jsr	_decompress_kernel
++	
++	;; Put start address of root partition in r9 so the kernel can use it
++	;; when mounting from flash
++
++	move.d	[_input_data], r9	; flash address of compressed kernel
++	add.d	[_inptr], r9		; size of compressed kernel
++
++	;; Restore command line magic and address.
++	move.d  _cmd_line_magic, $r10
++	move.d  [$r10], $r10
++	move.d  _cmd_line_addr, $r11
++	move.d  [$r11], $r11
++
++	;; Enter the decompressed kernel
++	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
++	jump	0x40004000	; kernel is linked to this address
++	
++	.data
++
++_input_data:
++	.dword	0		; used by the decompressor
++_cmd_line_magic:
++	.dword 0
++_cmd_line_addr:
++	.dword 0
++#include "hw_settings_816.S"
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_832.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_832.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_832.S	2007-05-28 17:17:12.000000000 +0200
+@@ -0,0 +1,126 @@
++/*
++ *  arch/cris/boot/compressed/head.S
++ *
++ *  Copyright (C) 1999, 2001 Axis Communications AB
++ *
++ *  Code that sets up the DRAM registers, calls the
++ *  decompressor to unpack the piggybacked kernel, and jumps.
++ *
++ */
++
++#define ASSEMBLER_MACROS_ONLY
++#include <asm/arch/sv_addr_ag.h>
++
++#define RAM_INIT_MAGIC 0x56902387
++#define COMMAND_LINE_MAGIC 0x87109563
++
++	;; Exported symbols
++	
++	.globl	_input_data
++
++	
++	.text
++
++	nop
++	di
++
++;; We need to initialze DRAM registers before we start using the DRAM
++	
++	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
++	beq	dram_init_finished
++	nop
++	
++#include "dram_init_832.S"
++	
++dram_init_finished:	
++		
++	;; Initiate the PA and PB ports
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
++	move.b   r0, [R_PORT_PA_DATA]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
++	move.b   r0, [R_PORT_PA_DIR]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
++	move.b   r0, [R_PORT_PB_DATA]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
++	move.b   r0, [R_PORT_PB_DIR]
++
++	;; Setup the stack to a suitably high address.
++	;; We assume 8 MB is the minimum DRAM in an eLinux
++	;; product and put the sp at the top for now.
++
++	move.d	0x40800000, sp
++
++	;; Figure out where the compressed piggyback image is
++	;; in the flash (since we wont try to copy it to DRAM
++	;; before unpacking). It is at _edata, but in flash.
++	;; Use (_edata - basse) as offset to the current PC.
++	
++basse:	move.d	pc, r5
++	and.d	0x7fffffff, r5	; strip any non-cache bit
++	subq	2, r5		; compensate for the move.d pc instr
++	move.d	r5, r0		; save for later - flash address of 'basse'
++	add.d	_edata, r5
++	sub.d	basse, r5	; r5 = flash address of '_edata'
++	
++	;; Copy text+data to DRAM
++	
++	move.d	basse, r1	; destination
++	move.d	_edata, r2	; end destination
++1:	move.w	[r0+], r3
++	move.w	r3, [r1+]
++	cmp.d	r2, r1
++	bcs	1b
++	nop
++
++	move.d	r5, [_input_data] ; for the decompressor
++
++
++	;; Clear the decompressors BSS (between _edata and _end)
++	
++	moveq	0, r0
++	move.d	_edata, r1
++	move.d	_end, r2
++1:	move.w	r0, [r1+]
++	cmp.d	r2, r1
++	bcs	1b
++	nop
++
++	;;  Save command line magic and address.
++	move.d	_cmd_line_magic, $r12
++	move.d  $r10, [$r12]
++	move.d	_cmd_line_addr, $r12
++	move.d  $r11, [$r12]
++	
++	;; Do the decompression and save compressed size in _inptr
++
++	jsr	_decompress_kernel
++	
++	;; Put start address of root partition in r9 so the kernel can use it
++	;; when mounting from flash
++
++	move.d	[_input_data], r9	; flash address of compressed kernel
++	add.d	[_inptr], r9		; size of compressed kernel
++
++	;; Restore command line magic and address.
++	move.d  _cmd_line_magic, $r10
++	move.d  [$r10], $r10
++	move.d  _cmd_line_addr, $r11
++	move.d  [$r11], $r11
++
++	;; Enter the decompressed kernel
++	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
++	jump	0x40004000	; kernel is linked to this address
++	
++	.data
++
++_input_data:
++	.dword	0		; used by the decompressor
++_cmd_line_magic:
++	.dword 0
++_cmd_line_addr:
++	.dword 0
++#include "hw_settings_832.S"
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_MCM.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_MCM.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_MCM.S	2007-05-28 17:17:51.000000000 +0200
+@@ -0,0 +1,126 @@
++/*
++ *  arch/cris/boot/compressed/head.S
++ *
++ *  Copyright (C) 1999, 2001 Axis Communications AB
++ *
++ *  Code that sets up the DRAM registers, calls the
++ *  decompressor to unpack the piggybacked kernel, and jumps.
++ *
++ */
++
++#define ASSEMBLER_MACROS_ONLY
++#include <asm/arch/sv_addr_ag.h>
++
++#define RAM_INIT_MAGIC 0x56902387
++#define COMMAND_LINE_MAGIC 0x87109563
++
++	;; Exported symbols
++	
++	.globl	_input_data
++
++	
++	.text
++
++	nop
++	di
++
++;; We need to initialze DRAM registers before we start using the DRAM
++	
++	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
++	beq	dram_init_finished
++	nop
++	
++#include "dram_init_MCM.S"
++	
++dram_init_finished:	
++		
++	;; Initiate the PA and PB ports
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
++	move.b   r0, [R_PORT_PA_DATA]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
++	move.b   r0, [R_PORT_PA_DIR]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
++	move.b   r0, [R_PORT_PB_DATA]
++
++	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
++	move.b   r0, [R_PORT_PB_DIR]
++
++	;; Setup the stack to a suitably high address.
++	;; We assume 8 MB is the minimum DRAM in an eLinux
++	;; product and put the sp at the top for now.
++
++	move.d	0x40800000, sp
++
++	;; Figure out where the compressed piggyback image is
++	;; in the flash (since we wont try to copy it to DRAM
++	;; before unpacking). It is at _edata, but in flash.
++	;; Use (_edata - basse) as offset to the current PC.
++	
++basse:	move.d	pc, r5
++	and.d	0x7fffffff, r5	; strip any non-cache bit
++	subq	2, r5		; compensate for the move.d pc instr
++	move.d	r5, r0		; save for later - flash address of 'basse'
++	add.d	_edata, r5
++	sub.d	basse, r5	; r5 = flash address of '_edata'
++	
++	;; Copy text+data to DRAM
++	
++	move.d	basse, r1	; destination
++	move.d	_edata, r2	; end destination
++1:	move.w	[r0+], r3
++	move.w	r3, [r1+]
++	cmp.d	r2, r1
++	bcs	1b
++	nop
++
++	move.d	r5, [_input_data] ; for the decompressor
++
++
++	;; Clear the decompressors BSS (between _edata and _end)
++	
++	moveq	0, r0
++	move.d	_edata, r1
++	move.d	_end, r2
++1:	move.w	r0, [r1+]
++	cmp.d	r2, r1
++	bcs	1b
++	nop
++
++	;;  Save command line magic and address.
++	move.d	_cmd_line_magic, $r12
++	move.d  $r10, [$r12]
++	move.d	_cmd_line_addr, $r12
++	move.d  $r11, [$r12]
++	
++	;; Do the decompression and save compressed size in _inptr
++
++	jsr	_decompress_kernel
++	
++	;; Put start address of root partition in r9 so the kernel can use it
++	;; when mounting from flash
++
++	move.d	[_input_data], r9	; flash address of compressed kernel
++	add.d	[_inptr], r9		; size of compressed kernel
++
++	;; Restore command line magic and address.
++	move.d  _cmd_line_magic, $r10
++	move.d  [$r10], $r10
++	move.d  _cmd_line_addr, $r11
++	move.d  [$r11], $r11
++
++	;; Enter the decompressed kernel
++	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
++	jump	0x40004000	; kernel is linked to this address
++	
++	.data
++
++_input_data:
++	.dword	0		; used by the decompressor
++_cmd_line_magic:
++	.dword 0
++_cmd_line_addr:
++	.dword 0
++#include "hw_settings_MCM.S"
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S	2007-05-28 17:14:14.000000000 +0200
+@@ -0,0 +1,62 @@
++/*
++ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
++ * 
++ * This table is used by some tools to extract hardware parameters.
++ * The table should be included in the kernel and the decompressor.
++ * Don't forget to update the tools if you change this table.
++ *
++ * Copyright (C) 2001 Axis Communications AB
++ *
++ * Authors:  Mikael Starvik (starvik@axis.com)	
++ */
++
++#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
++#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
++	
++	.ascii "HW_PARAM_MAGIC" ; Magic number
++	.dword 0xc0004000	; Kernel start address
++
++	; Debug port
++#ifdef CONFIG_ETRAX_DEBUG_PORT0
++	.dword 0		
++#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
++	.dword 1
++#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
++	.dword 2
++#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
++	.dword 3
++#else
++	.dword 4 ; No debug
++#endif			
++
++	; SDRAM or EDO DRAM?
++#ifdef CONFIG_ETRAX_SDRAM
++	.dword 1
++#else
++	.dword 0
++#endif
++
++	; Register values 
++	.dword R_WAITSTATES
++	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
++	.dword R_BUS_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
++#ifdef CONFIG_ETRAX_SDRAM
++	.dword R_SDRAM_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
++	.dword R_SDRAM_TIMING
++	.dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING
++#else
++	.dword R_DRAM_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
++	.dword R_DRAM_TIMING
++	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
++#endif
++	.dword R_PORT_PA_SET
++	.dword PA_SET_VALUE 
++	.dword R_PORT_PB_SET
++	.dword PB_SET_VALUE
++	.dword 0 ; No more register values
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S	2007-05-28 20:12:02.000000000 +0200
+@@ -0,0 +1,62 @@
++/*
++ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
++ * 
++ * This table is used by some tools to extract hardware parameters.
++ * The table should be included in the kernel and the decompressor.
++ * Don't forget to update the tools if you change this table.
++ *
++ * Copyright (C) 2001 Axis Communications AB
++ *
++ * Authors:  Mikael Starvik (starvik@axis.com)	
++ */
++
++#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
++#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
++	
++	.ascii "HW_PARAM_MAGIC" ; Magic number
++	.dword 0xc0004000	; Kernel start address
++
++	; Debug port
++#ifdef CONFIG_ETRAX_DEBUG_PORT0
++	.dword 0		
++#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
++	.dword 1
++#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
++	.dword 2
++#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
++	.dword 3
++#else
++	.dword 4 ; No debug
++#endif			
++
++	; SDRAM or EDO DRAM?
++#ifdef CONFIG_ETRAX_SDRAM
++	.dword 1
++#else
++	.dword 0
++#endif
++
++	; Register values 
++	.dword R_WAITSTATES
++	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
++	.dword R_BUS_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
++#ifdef CONFIG_ETRAX_SDRAM
++	.dword R_SDRAM_CONFIG
++	.dword 0x09603636
++	.dword R_SDRAM_TIMING
++	.dword 0x80008002
++#else
++	.dword R_DRAM_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
++	.dword R_DRAM_TIMING
++	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
++#endif
++	.dword R_PORT_PA_SET
++	.dword PA_SET_VALUE 
++	.dword R_PORT_PB_SET
++	.dword PB_SET_VALUE
++	.dword 0 ; No more register values
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S	2007-05-28 20:12:29.000000000 +0200
+@@ -0,0 +1,62 @@
++/*
++ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
++ * 
++ * This table is used by some tools to extract hardware parameters.
++ * The table should be included in the kernel and the decompressor.
++ * Don't forget to update the tools if you change this table.
++ *
++ * Copyright (C) 2001 Axis Communications AB
++ *
++ * Authors:  Mikael Starvik (starvik@axis.com)	
++ */
++
++#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
++#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
++	
++	.ascii "HW_PARAM_MAGIC" ; Magic number
++	.dword 0xc0004000	; Kernel start address
++
++	; Debug port
++#ifdef CONFIG_ETRAX_DEBUG_PORT0
++	.dword 0		
++#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
++	.dword 1
++#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
++	.dword 2
++#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
++	.dword 3
++#else
++	.dword 4 ; No debug
++#endif			
++
++	; SDRAM or EDO DRAM?
++#ifdef CONFIG_ETRAX_SDRAM
++	.dword 1
++#else
++	.dword 0
++#endif
++
++	; Register values 
++	.dword R_WAITSTATES
++	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
++	.dword R_BUS_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
++#ifdef CONFIG_ETRAX_SDRAM
++	.dword R_SDRAM_CONFIG
++	.dword 0x09603636
++	.dword R_SDRAM_TIMING
++	.dword 0x80008002
++#else
++	.dword R_DRAM_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
++	.dword R_DRAM_TIMING
++	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
++#endif
++	.dword R_PORT_PA_SET
++	.dword PA_SET_VALUE 
++	.dword R_PORT_PB_SET
++	.dword PB_SET_VALUE
++	.dword 0 ; No more register values
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S	2007-05-28 20:12:55.000000000 +0200
+@@ -0,0 +1,62 @@
++/*
++ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
++ * 
++ * This table is used by some tools to extract hardware parameters.
++ * The table should be included in the kernel and the decompressor.
++ * Don't forget to update the tools if you change this table.
++ *
++ * Copyright (C) 2001 Axis Communications AB
++ *
++ * Authors:  Mikael Starvik (starvik@axis.com)	
++ */
++
++#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
++#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
++	
++	.ascii "HW_PARAM_MAGIC" ; Magic number
++	.dword 0xc0004000	; Kernel start address
++
++	; Debug port
++#ifdef CONFIG_ETRAX_DEBUG_PORT0
++	.dword 0		
++#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
++	.dword 1
++#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
++	.dword 2
++#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
++	.dword 3
++#else
++	.dword 4 ; No debug
++#endif			
++
++	; SDRAM or EDO DRAM?
++#ifdef CONFIG_ETRAX_SDRAM
++	.dword 1
++#else
++	.dword 0
++#endif
++
++	; Register values 
++	.dword R_WAITSTATES
++	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
++	.dword R_BUS_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
++#ifdef CONFIG_ETRAX_SDRAM
++	.dword R_SDRAM_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG
++	.dword R_SDRAM_TIMING
++	.dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING
++#else
++	.dword R_DRAM_CONFIG
++	.dword 0x09603737
++	.dword R_DRAM_TIMING
++	.dword 0x80008002
++#endif
++	.dword R_PORT_PA_SET
++	.dword PA_SET_VALUE 
++	.dword R_PORT_PB_SET
++	.dword PB_SET_VALUE
++	.dword 0 ; No more register values
+diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S
+--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S	2007-05-28 20:11:31.000000000 +0200
+@@ -0,0 +1,62 @@
++/*
++ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
++ * 
++ * This table is used by some tools to extract hardware parameters.
++ * The table should be included in the kernel and the decompressor.
++ * Don't forget to update the tools if you change this table.
++ *
++ * Copyright (C) 2001 Axis Communications AB
++ *
++ * Authors:  Mikael Starvik (starvik@axis.com)	
++ */
++
++#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PA_DATA))
++#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \
++		(CONFIG_ETRAX_DEF_R_PORT_PB_DATA))
++	
++	.ascii "HW_PARAM_MAGIC" ; Magic number
++	.dword 0xc0004000	; Kernel start address
++
++	; Debug port
++#ifdef CONFIG_ETRAX_DEBUG_PORT0
++	.dword 0		
++#elif defined(CONFIG_ETRAX_DEBUG_PORT1)
++	.dword 1
++#elif defined(CONFIG_ETRAX_DEBUG_PORT2)
++	.dword 2
++#elif defined(CONFIG_ETRAX_DEBUG_PORT3)
++	.dword 3
++#else
++	.dword 4 ; No debug
++#endif			
++
++	; SDRAM or EDO DRAM?
++#ifdef CONFIG_ETRAX_SDRAM
++	.dword 1
++#else
++	.dword 0
++#endif
++
++	; Register values 
++	.dword R_WAITSTATES
++	.dword CONFIG_ETRAX_DEF_R_WAITSTATES
++	.dword R_BUS_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_BUS_CONFIG
++#ifdef CONFIG_ETRAX_SDRAM
++	.dword R_SDRAM_CONFIG
++	.dword 0x09603636
++	.dword R_SDRAM_TIMING
++	.dword 0x80608002
++#else
++	.dword R_DRAM_CONFIG
++	.dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG
++	.dword R_DRAM_TIMING
++	.dword CONFIG_ETRAX_DEF_R_DRAM_TIMING
++#endif
++	.dword R_PORT_PA_SET
++	.dword PA_SET_VALUE 
++	.dword R_PORT_PB_SET
++	.dword PB_SET_VALUE
++	.dword 0 ; No more register values