update to 2.6.25.19, and refresh patches

SVN-Revision: 13137

7 files changed, 21 insertions, 21 deletions

diff --git a/target/linux/etrax/Makefile b/target/linux/etrax/Makefile
index dcc0c37..0fe4f42 100644
--- a/target/linux/etrax/Makefile
+++ b/target/linux/etrax/Makefile
@@ -10,7 +10,7 @@ ARCH:=cris
 BOARD:=etrax
 BOARDNAME:=Foxboard (ETRAX 100LX)
 FEATURES:=squashfs jffs2 broken
-LINUX_VERSION:=2.6.25.17
+LINUX_VERSION:=2.6.25.19
 
 include $(INCLUDE_DIR)/target.mk
 
diff --git a/target/linux/etrax/patches/100-compile_fixes.patch b/target/linux/etrax/patches/100-compile_fixes.patch
index ea6d08e..ecb9307 100644
--- a/target/linux/etrax/patches/100-compile_fixes.patch
+++ b/target/linux/etrax/patches/100-compile_fixes.patch
@@ -1,6 +1,6 @@
 --- a/arch/cris/Makefile
 +++ b/arch/cris/Makefile
-@@ -33,7 +33,7 @@
+@@ -33,7 +33,7 @@ endif
  
  LD = $(CROSS_COMPILE)ld -mcrislinux
  
@@ -21,7 +21,7 @@
  subdir- := compressed rescue
  targets := Image
  
-@@ -14,7 +11,6 @@
+@@ -14,7 +11,6 @@ $(obj)/Image: vmlinux FORCE
  
  $(obj)/compressed/vmlinux: $(obj)/Image FORCE
  	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
@@ -45,7 +45,7 @@
  
  quiet_cmd_image = BUILD   $@
  cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-@@ -22,10 +18,10 @@
+@@ -22,10 +18,10 @@ $(obj)/decompress.bin: $(obj)/decompress
  	$(call if_changed,objcopy)
  
  $(obj)/head.o: $(obj)/head.S .config
@@ -93,7 +93,7 @@
  	beq	dram_init_finished
  	nop
  	
-@@ -36,91 +37,91 @@
+@@ -36,91 +37,91 @@ dram_init_finished:	
  		
  	;; Initiate the PA and PB ports
  
@@ -233,7 +233,7 @@
   * adaptation for Linux/CRIS Axis Communications AB, 1999
   *
   */
-@@ -99,12 +99,12 @@
+@@ -99,12 +99,12 @@ static void error(char *m);
  static void gzip_mark(void **);
  static void gzip_release(void **);
   
@@ -249,7 +249,7 @@
   
  #include "../../../../../lib/inflate.c"
  
-@@ -139,7 +139,7 @@
+@@ -139,7 +139,7 @@ static void gzip_release(void **ptr)
  /* decompressor info and error messages to serial console */
  
  static void
@@ -258,7 +258,7 @@
  {
  #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
  	while(*s) {
-@@ -209,9 +209,9 @@
+@@ -209,9 +209,9 @@ flush_window()
  static void
  error(char *x)
  {
@@ -271,7 +271,7 @@
  
  	while(1);	/* Halt */
  }
-@@ -257,14 +257,7 @@
+@@ -257,14 +257,7 @@ decompress_kernel()
  
  	makecrc();
  
@@ -290,7 +290,7 @@
  }
 --- a/arch/cris/arch-v10/mm/init.c
 +++ b/arch/cris/arch-v10/mm/init.c
-@@ -184,6 +184,9 @@
+@@ -184,6 +184,9 @@ paging_init(void)
  
  	free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
  }
diff --git a/target/linux/etrax/patches/101-cris-eth-driver.patch b/target/linux/etrax/patches/101-cris-eth-driver.patch
index f73b379..8ffe073 100644
--- a/target/linux/etrax/patches/101-cris-eth-driver.patch
+++ b/target/linux/etrax/patches/101-cris-eth-driver.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/cris/eth_v10.c
 +++ b/drivers/net/cris/eth_v10.c
-@@ -1707,7 +1707,7 @@
+@@ -1707,7 +1707,7 @@ e100_set_network_leds(int active)
  static void
  e100_netpoll(struct net_device* netdev)
  {
diff --git a/target/linux/etrax/patches/200-samsung_flash.patch b/target/linux/etrax/patches/200-samsung_flash.patch
index ac4ac67..5353106 100644
--- a/target/linux/etrax/patches/200-samsung_flash.patch
+++ b/target/linux/etrax/patches/200-samsung_flash.patch
@@ -1,6 +1,6 @@
 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -297,8 +297,8 @@
+@@ -297,8 +297,8 @@ struct mtd_info *cfi_cmdset_0002(struct 
  			return NULL;
  		}
  
diff --git a/target/linux/etrax/patches/201-flashsize.patch b/target/linux/etrax/patches/201-flashsize.patch
index 859bb46..4c4fa81 100644
--- a/target/linux/etrax/patches/201-flashsize.patch
+++ b/target/linux/etrax/patches/201-flashsize.patch
@@ -8,7 +8,7 @@
 +	.dword 0xdeadc0de
 --- a/arch/cris/arch-v10/drivers/axisflashmap.c
 +++ b/arch/cris/arch-v10/drivers/axisflashmap.c
-@@ -113,7 +113,7 @@
+@@ -113,7 +113,7 @@ static struct map_info map_cse1 = {
  
  /* If no partition-table was found, we use this default-set. */
  #define MAX_PARTITIONS         7
@@ -17,7 +17,7 @@
  
  /*
   * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
-@@ -122,19 +122,14 @@
+@@ -122,19 +122,14 @@ static struct map_info map_cse1 = {
   */
  static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
  	{
@@ -42,7 +42,7 @@
  	}
  };
  
-@@ -281,6 +276,11 @@
+@@ -281,6 +276,11 @@ static int __init init_axis_flash(void)
  	struct partitiontable_entry *ptable;
  	int use_default_ptable = 1; /* Until proven otherwise. */
  	const char pmsg[] = "  /dev/flash%d at 0x%08x, size 0x%08x\n";
@@ -54,7 +54,7 @@
  
  	if (!(mymtd = flash_probe())) {
  		/* There's no reason to use this module if no flash chip can
-@@ -292,6 +292,31 @@
+@@ -292,6 +292,31 @@ static int __init init_axis_flash(void)
  		       mymtd->name, mymtd->size);
  		axisflash_mtd = mymtd;
  	}
diff --git a/target/linux/etrax/patches/300-sysfs.patch b/target/linux/etrax/patches/300-sysfs.patch
index 3b03784..a7bebe5 100644
--- a/target/linux/etrax/patches/300-sysfs.patch
+++ b/target/linux/etrax/patches/300-sysfs.patch
@@ -1,6 +1,6 @@
 --- a/drivers/serial/crisv10.c
 +++ b/drivers/serial/crisv10.c
-@@ -27,6 +27,7 @@
+@@ -27,6 +27,7 @@ static char *serial_version = "$Revision
  #include <linux/kernel.h>
  #include <linux/mutex.h>
  #include <linux/bitops.h>
@@ -8,7 +8,7 @@
  
  #include <asm/io.h>
  #include <asm/irq.h>
-@@ -4384,6 +4385,7 @@
+@@ -4384,6 +4385,7 @@ static const struct tty_operations rs_op
  	.tiocmset = rs_tiocmset
  };
  
@@ -16,7 +16,7 @@
  static int __init
  rs_init(void)
  {
-@@ -4518,6 +4520,24 @@
+@@ -4518,6 +4520,24 @@ rs_init(void)
  #endif
  #endif /* CONFIG_SVINTO_SIM */
  
diff --git a/target/linux/etrax/patches/301-usb_support.patch b/target/linux/etrax/patches/301-usb_support.patch
index 5b443d4..51de789 100644
--- a/target/linux/etrax/patches/301-usb_support.patch
+++ b/target/linux/etrax/patches/301-usb_support.patch
@@ -1,6 +1,6 @@
 --- a/drivers/usb/Makefile
 +++ b/drivers/usb/Makefile
-@@ -16,6 +16,7 @@
+@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
  obj-$(CONFIG_USB_SL811_HCD)	+= host/
  obj-$(CONFIG_USB_U132_HCD)	+= host/
  obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
@@ -10,7 +10,7 @@
  obj-$(CONFIG_USB_PRINTER)	+= class/
 --- a/drivers/usb/host/Makefile
 +++ b/drivers/usb/host/Makefile
-@@ -17,3 +17,5 @@
+@@ -17,3 +17,5 @@ obj-$(CONFIG_USB_SL811_CS)	+= sl811_cs.o
  obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
  obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o