sync ssb with upstream

SVN-Revision: 9302

12 files changed, 691 insertions, 297 deletions

diff --git a/target/linux/generic-2.6/files/drivers/ssb/Kconfig b/target/linux/generic-2.6/files/drivers/ssb/Kconfig
index 03c4945..b4a5e5e 100644
--- a/target/linux/generic-2.6/files/drivers/ssb/Kconfig
+++ b/target/linux/generic-2.6/files/drivers/ssb/Kconfig
@@ -1,18 +1,33 @@
 menu "Sonics Silicon Backplane"
 
+config SSB_POSSIBLE
+	bool
+	depends on HAS_IOMEM
+	default y
+
 config SSB
 	tristate "Sonics Silicon Backplane support"
-	depends on EXPERIMENTAL
+	depends on SSB_POSSIBLE
 	help
-	  Support for the Sonics Silicon Backplane bus
+	  Support for the Sonics Silicon Backplane bus.
+	  You only need to enable this option, if you are
+	  configuring a kernel for an embedded system with
+	  this bus.
+	  It will be auto-selected if needed in other
+	  environments.
+
+	  The module will be called ssb.
 
-	  The module will be called ssb
+	  If unsure, say N.
 
-	  If unsure, say M
+config SSB_PCIHOST_POSSIBLE
+	bool
+	depends on SSB && PCI
+	default y
 
 config SSB_PCIHOST
 	bool "Support for SSB on PCI-bus host"
-	depends on SSB && PCI
+	depends on SSB_PCIHOST_POSSIBLE
 	default y
 	help
 	  Support for a Sonics Silicon Backplane on top
@@ -20,9 +35,14 @@ config SSB_PCIHOST
 
 	  If unsure, say Y
 
+config SSB_PCMCIAHOST_POSSIBLE
+	bool
+	depends on SSB && PCMCIA && EXPERIMENTAL
+	default y
+
 config SSB_PCMCIAHOST
-	bool "Support for SSB on PCMCIA-bus host"
-	depends on SSB && PCMCIA
+	bool "Support for SSB on PCMCIA-bus host (EXPERIMENTAL)"
+	depends on SSB_PCMCIAHOST_POSSIBLE
 	help
 	  Support for a Sonics Silicon Backplane on top
 	  of a PCMCIA device.
@@ -31,7 +51,7 @@ config SSB_PCMCIAHOST
 
 config SSB_SILENT
 	bool "No SSB kernel messages"
-	depends on SSB
+	depends on SSB && EMBEDDED
 	help
 	  This option turns off all Sonics Silicon Backplane printks.
 	  Note that you won't be able to identify problems, once
@@ -55,10 +75,14 @@ config SSB_SERIAL
 	depends on SSB
 	# ChipCommon and ExtIf serial support routines.
 
+config SSB_DRIVER_PCICORE_POSSIBLE
+	bool
+	depends on SSB_PCIHOST
+	default y
+
 config SSB_DRIVER_PCICORE
 	bool "SSB PCI core driver"
-	depends on SSB && SSB_PCIHOST
-	default y
+	depends on SSB_DRIVER_PCICORE_POSSIBLE
 	help
 	  Driver for the Sonics Silicon Backplane attached
 	  Broadcom PCI core.
@@ -66,14 +90,14 @@ config SSB_DRIVER_PCICORE
 	  If unsure, say Y
 
 config SSB_PCICORE_HOSTMODE
-	bool "Hostmode support for SSB PCI core"
-	depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS
+	bool "Hostmode support for SSB PCI core (EXPERIMENTAL)"
+	depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS && EXPERIMENTAL
 	help
 	  PCIcore hostmode operation (external PCI bus).
 
 config SSB_DRIVER_MIPS
-	bool "SSB Broadcom MIPS core driver"
-	depends on SSB && MIPS
+	bool "SSB Broadcom MIPS core driver (EXPERIMENTAL)"
+	depends on SSB && MIPS && EXPERIMENTAL
 	select SSB_SERIAL
 	help
 	  Driver for the Sonics Silicon Backplane attached
@@ -82,8 +106,8 @@ config SSB_DRIVER_MIPS
 	  If unsure, say N
 
 config SSB_DRIVER_EXTIF
-	bool "SSB Broadcom EXTIF core driver"
-	depends on SSB_DRIVER_MIPS
+	bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)"
+	depends on SSB_DRIVER_MIPS && EXPERIMENTAL
 	help
 	  Driver for the Sonics Silicon Backplane attached
 	  Broadcom EXTIF core.
diff --git a/target/linux/generic-2.6/files/drivers/ssb/Makefile b/target/linux/generic-2.6/files/drivers/ssb/Makefile
index 9a2b379..7be3975 100644
--- a/target/linux/generic-2.6/files/drivers/ssb/Makefile
+++ b/target/linux/generic-2.6/files/drivers/ssb/Makefile
@@ -1,11 +1,18 @@
-ssb-builtin-drivers-y					+= driver_chipcommon.o
-ssb-builtin-drivers-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
-ssb-builtin-drivers-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
+# core
+ssb-y					+= main.o scan.o
 
-ssb-hostsupport-$(CONFIG_SSB_PCIHOST)			+= pci.o pcihost_wrapper.o
-ssb-hostsupport-$(CONFIG_SSB_PCMCIAHOST)		+= pcmcia.o
+# host support
+ssb-$(CONFIG_SSB_PCIHOST)		+= pci.o pcihost_wrapper.o
+ssb-$(CONFIG_SSB_PCMCIAHOST)		+= pcmcia.o
 
-obj-$(CONFIG_SSB) += ssb.o
+# built-in drivers
+ssb-y					+= driver_chipcommon.o
+ssb-$(CONFIG_SSB_DRIVER_MIPS)		+= driver_mipscore.o
+ssb-$(CONFIG_SSB_DRIVER_EXTIF)		+= driver_extif.o
+ssb-$(CONFIG_SSB_DRIVER_PCICORE)	+= driver_pcicore.o
 
-ssb-objs	:= main.o scan.o \
-		   $(ssb-hostsupport-y) $(ssb-builtin-drivers-y)
+# b43 pci-ssb-bridge driver
+# Not strictly a part of SSB, but kept here for convenience
+ssb-$(CONFIG_SSB_PCIHOST)		+= b43_pci_bridge.o
+
+obj-$(CONFIG_SSB)			+= ssb.o
diff --git a/target/linux/generic-2.6/files/drivers/ssb/b43_pci_bridge.c b/target/linux/generic-2.6/files/drivers/ssb/b43_pci_bridge.c
new file mode 100644
index 0000000..f145d8a
--- /dev/null
+++ b/target/linux/generic-2.6/files/drivers/ssb/b43_pci_bridge.c
@@ -0,0 +1,48 @@
+/*
+ * Broadcom 43xx PCI-SSB bridge module
+ *
+ * This technically is a seperate PCI driver module, but
+ * because of its small size we include it in the SSB core
+ * instead of creating a standalone module.
+ *
+ * Copyright 2007  Michael Buesch <mb@bu3sch.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/pci.h>
+#include <linux/ssb/ssb.h>
+
+#include "ssb_private.h"
+
+
+static const struct pci_device_id b43_pci_bridge_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4301) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4307) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4311) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) },
+	{ 0, },
+};
+MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
+
+static struct pci_driver b43_pci_bridge_driver = {
+	.name = "b43-pci-bridge",
+	.id_table = b43_pci_bridge_tbl,
+};
+
+
+int __init b43_pci_ssb_bridge_init(void)
+{
+	return ssb_pcihost_register(&b43_pci_bridge_driver);
+}
+
+void __exit b43_pci_ssb_bridge_exit(void)
+{
+	ssb_pcihost_unregister(&b43_pci_bridge_driver);
+}
diff --git a/target/linux/generic-2.6/files/drivers/ssb/driver_chipcommon.c b/target/linux/generic-2.6/files/drivers/ssb/driver_chipcommon.c
index a283de9..6fbf1c5 100644
--- a/target/linux/generic-2.6/files/drivers/ssb/driver_chipcommon.c
+++ b/target/linux/generic-2.6/files/drivers/ssb/driver_chipcommon.c
@@ -16,7 +16,7 @@
 
 
 /* Clock sources */
-enum {
+enum ssb_clksrc {
 	/* PCI clock */
 	SSB_CHIPCO_CLKSRC_PCI,
 	/* Crystal slow clock oscillator */
@@ -39,6 +39,14 @@ static inline void chipco_write32(struct ssb_chipcommon *cc,
 	ssb_write32(cc->dev, offset, value);
 }
 
+static inline void chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
+					 u32 mask, u32 value)
+{
+	value &= mask;
+	value |= chipco_read32(cc, offset) & ~mask;
+	chipco_write32(cc, offset, value);
+}
+
 void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
 			      enum ssb_clkmode mode)
 {
@@ -85,15 +93,15 @@ void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc,
 			ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0);
 		break;
 	default:
-		assert(0);
+		SSB_WARN_ON(1);
 	}
 }
 
 /* Get the Slow Clock Source */
-static int chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
+static enum ssb_clksrc chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
 {
 	struct ssb_bus *bus = cc->dev->bus;
-	u32 tmp = 0;
+	u32 uninitialized_var(tmp);
 
 	if (cc->dev->id.revision < 6) {
 		if (bus->bustype == SSB_BUSTYPE_SSB ||
@@ -123,9 +131,9 @@ static int chipco_pctl_get_slowclksrc(struct ssb_chipcommon *cc)
 /* Get maximum or minimum (depending on get_max flag) slowclock frequency. */
 static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
 {
-	int limit;
-	int clocksrc;
-	int divisor;
+	int uninitialized_var(limit);
+	enum ssb_clksrc clocksrc;
+	int divisor = 1;
 	u32 tmp;
 
 	clocksrc = chipco_pctl_get_slowclksrc(cc);
@@ -138,13 +146,11 @@ static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
 			divisor = 32;
 			break;
 		default:
-			assert(0);
-			divisor = 1;
+			SSB_WARN_ON(1);
 		}
 	} else if (cc->dev->id.revision < 10) {
 		switch (clocksrc) {
 		case SSB_CHIPCO_CLKSRC_LOPWROS:
-			divisor = 1;
 			break;
 		case SSB_CHIPCO_CLKSRC_XTALOS:
 		case SSB_CHIPCO_CLKSRC_PCI:
@@ -152,9 +158,6 @@ static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
 			divisor = (tmp >> 16) + 1;
 			divisor *= 4;
 			break;
-		default:
-			assert(0);
-			divisor = 1;
 		}
 	} else {
 		tmp = chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL);
@@ -181,9 +184,6 @@ static int chipco_pctl_clockfreqlimit(struct ssb_chipcommon *cc, int get_max)
 		else
 			limit = 25000000;
 		break;
-	default:
-		assert(0);
-		limit = 0;
 	}
 	limit /= divisor;
 
@@ -235,7 +235,7 @@ static void calc_fast_powerup_delay(struct ssb_chipcommon *cc)
 	minfreq = chipco_pctl_clockfreqlimit(cc, 0);
 	pll_on_delay = chipco_read32(cc, SSB_CHIPCO_PLLONDELAY);
 	tmp = (((pll_on_delay + 2) * 1000000) + (minfreq - 1)) / minfreq;
-	assert((tmp & ~0xFFFF) == 0);
+	SSB_WARN_ON(tmp & ~0xFFFF);
 
 	cc->fast_pwrup_delay = tmp;
 }
@@ -264,6 +264,30 @@ void ssb_chipco_resume(struct ssb_chipcommon *cc)
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST);
 }
 
+/* Get the processor clock */
+void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc,
+                             u32 *plltype, u32 *n, u32 *m)
+{
+	*n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N);
+	*plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT);
+	switch (*plltype) {
+	case SSB_PLLTYPE_2:
+	case SSB_PLLTYPE_4:
+	case SSB_PLLTYPE_6:
+	case SSB_PLLTYPE_7:
+		*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_MIPS);
+		break;
+	case SSB_PLLTYPE_3:
+		/* 5350 uses m2 to control mips */
+		*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_M2);
+		break;
+	default:
+		*m = chipco_read32(cc, SSB_CHIPCO_CLOCK_SB);
+		break;
+	}
+}
+
+/* Get the bus clock */
 void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc,
 				 u32 *plltype, u32 *n, u32 *m)
 {
@@ -320,6 +344,27 @@ void ssb_chipco_timing_init(struct ssb_chipcommon *cc,
 	}
 }
 
+/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
+void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, u32 ticks)
+{
+	/* instant NMI */
+	chipco_write32(cc, SSB_CHIPCO_WATCHDOG, ticks);
+}
+
+u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask)
+{
+	return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask;
+}
+
+void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+	chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value);
+}
+
+void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value)
+{
+	chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value);
+}
 
 #ifdef CONFIG_SSB_SERIAL
 int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
@@ -352,10 +397,8 @@ int ssb_chipco_serial_init(struct ssb_chipcommon *cc,
 		} else if (cc->dev->id.revision >= 3) {
 			/* Internal backplane clock */
 			baud_base = ssb_clockspeed(bus);
-			div = 2; /* Minimum divisor */
-			chipco_write32(cc, SSB_CHIPCO_CLKDIV,
-				       (chipco_read32(cc, SSB_CHIPCO_CLKDIV)
-				        & ~SSB_CHIPCO_CLKDIV_UART) | div);
+			div = chipco_read32(cc, SSB_CHIPCO_CLKDIV)
+			      & SSB_CHIPCO_CLKDIV_UART;
 		} else {
 			/* Fixed internal backplane clock */
 			baud_base = 88000000;
diff --git a/target/linux/generic-2.6/files/drivers/ssb/driver_extif.c b/target/linux/generic-2.6/files/drivers/ssb/driver_extif.c
new file mode 100644
index 0000000..fe55eb8
--- /dev/null
+++ b/target/linux/generic-2.6/files/drivers/ssb/driver_extif.c
@@ -0,0 +1,129 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom EXTIF core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org>
+ * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+#include "ssb_private.h"
+
+
+static inline u32 extif_read32(struct ssb_extif *extif, u16 offset)
+{
+	return ssb_read32(extif->dev, offset);
+}
+
+static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value)
+{
+	ssb_write32(extif->dev, offset, value);
+}
+
+static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset,
+					u32 mask, u32 value)
+{
+	value &= mask;
+	value |= extif_read32(extif, offset) & ~mask;
+	extif_write32(extif, offset, value);
+}
+
+#ifdef CONFIG_SSB_SERIAL
+static bool serial_exists(u8 *regs)
+{
+	u8 save_mcr, msr = 0;
+
+	if (regs) {
+		save_mcr = regs[UART_MCR];
+		regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS);
+		msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI
+					| UART_MSR_CTS | UART_MSR_DSR);
+		regs[UART_MCR] = save_mcr;
+	}
+	return (msr == (UART_MSR_DCD | UART_MSR_CTS));
+}
+
+int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports)
+{
+	u32 i, nr_ports = 0;
+
+	/* Disable GPIO interrupt initially */
+	extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0);
+	extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0);
+
+	for (i = 0; i < 2; i++) {
+		void __iomem *uart_regs;
+
+		uart_regs = ioremap_nocache(SSB_EUART, 16);
+		if (uart_regs) {
+			uart_regs += (i * 8);
+
+			if (serial_exists(uart_regs) && ports) {
+				extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2);
+
+				nr_ports++;
+				ports[i].regs = uart_regs;
+				ports[i].irq = 2;
+				ports[i].baud_base = 13500000;
+				ports[i].reg_shift = 0;
+			}
+			iounmap(uart_regs);
+		}
+	}
+	return nr_ports;
+}
+#endif /* CONFIG_SSB_SERIAL */
+
+void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
+{
+	u32 tmp;
+
+	/* Initialize extif so we can get to the LEDs and external UART */
+	extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN);
+
+	/* Set timing for the flash */
+	tmp  = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
+	tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;
+	tmp |= DIV_ROUND_UP(120, ns);
+	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
+
+	/* Set programmable interface timing for external uart */
+	tmp  = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
+	tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;
+	tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT;
+	tmp |= DIV_ROUND_UP(120, ns);
+	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
+}
+
+void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+				u32 *pll_type, u32 *n, u32 *m)
+{
+	*pll_type = SSB_PLLTYPE_1;
+	*n = extif_read32(extif, SSB_EXTIF_CLOCK_N);
+	*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
+}
+
+u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask)
+{
+	return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;
+}
+
+void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value)
+{
+	return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),
+				   mask, value);
+}
+
+void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value)
+{
+	return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),
+				   mask, value);
+}
+
diff --git a/target/linux/generic-2.6/files/drivers/ssb/driver_mipscore.c b/target/linux/generic-2.6/files/drivers/ssb/driver_mipscore.c
index 67d1017..3d3dd32 100644
--- a/target/linux/generic-2.6/files/drivers/ssb/driver_mipscore.c
+++ b/target/linux/generic-2.6/files/drivers/ssb/driver_mipscore.c
@@ -13,7 +13,7 @@
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
-#include <asm/time.h>
+#include <linux/time.h>
 
 #include "ssb_private.h"
 
@@ -117,51 +117,10 @@ static void set_irq(struct ssb_device *dev, unsigned int irq)
 	ssb_write32(mdev, SSB_IPSFLAG, irqflag);
 }
 
-/* XXX: leave here or move into separate extif driver? */
-static int ssb_extif_serial_init(struct ssb_device *dev, struct ssb_serial_ports *ports)
-{
-
-}
-
-
 static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
 {
 	struct ssb_bus *bus = mcore->dev->bus;
 
-	//TODO if (EXTIF available
-#if 0
-		extifregs_t *eir = (extifregs_t *) regs;
-		sbconfig_t *sb;
-
-		/* Determine external UART register base */
-		sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
-		base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
-
-		/* Determine IRQ */
-		irq = sb_irq(sbh);
-
-		/* Disable GPIO interrupt initially */
-		W_REG(&eir->gpiointpolarity, 0);
-		W_REG(&eir->gpiointmask, 0);
-
-		/* Search for external UARTs */
-		n = 2;
-		for (i = 0; i < 2; i++) {
-			regs = (void *) REG_MAP(base + (i * 8), 8);
-			if (BCMINIT(serial_exists)(regs)) {
-				/* Set GPIO 1 to be the external UART IRQ */
-				W_REG(&eir->gpiointmask, 2);
-				if (add)
-					add(regs, irq, 13500000, 0);
-			}
-		}
-
-		/* Add internal UART if enabled */
-		if (R_REG(&eir->corecontrol) & CC_UE)
-			if (add)
-				add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
-
-#endif
 	if (bus->extif.dev)
 		mcore->nr_serial_ports = ssb_extif_serial_init(&bus->extif, mcore->serial_ports);
 	else if (bus->chipco.dev)
@@ -174,23 +133,47 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore)
 {
 	struct ssb_bus *bus = mcore->dev->bus;
 
+	mcore->flash_buswidth = 2;
 	if (bus->chipco.dev) {
 		mcore->flash_window = 0x1c000000;
-		mcore->flash_window_size = 0x800000;
+		mcore->flash_window_size = 0x02000000;
+		if ((ssb_read32(bus->chipco.dev, SSB_CHIPCO_FLASH_CFG)
+		               & SSB_CHIPCO_CFG_DS16) == 0)
+			mcore->flash_buswidth = 1;
 	} else {
 		mcore->flash_window = 0x1fc00000;
-		mcore->flash_window_size = 0x400000;
+		mcore->flash_window_size = 0x00400000;
 	}
 }
 
-
-static void ssb_cpu_clock(struct ssb_mipscore *mcore)
+u32 ssb_cpu_clock(struct ssb_mipscore *mcore)
 {
+	struct ssb_bus *bus = mcore->dev->bus;
+	u32 pll_type, n, m, rate = 0;
+
+	if (bus->extif.dev) {
+		ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
+	} else if (bus->chipco.dev) {
+		ssb_chipco_get_clockcpu(&bus->chipco, &pll_type, &n, &m);
+	} else
+		return 0;
+
+	if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) {
+		rate = 200000000;
+	} else {
+		rate = ssb_calc_clock_rate(pll_type, n, m);
+	}
+
+	if (pll_type == SSB_PLLTYPE_6) {
+		rate *= 2;
+	}
+
+	return rate;
 }
 
 void ssb_mipscore_init(struct ssb_mipscore *mcore)
 {
-	struct ssb_bus *bus = mcore->dev->bus;
+	struct ssb_bus *bus;
 	struct ssb_device *dev;
 	unsigned long hz, ns;
 	unsigned int irq, i;
@@ -200,56 +183,39 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore)
 
 	ssb_dprintk(KERN_INFO PFX "Initializing MIPS core...\n");
 
+	bus = mcore->dev->bus;
 	hz = ssb_clockspeed(bus);
 	if (!hz)
 		hz = 100000000;
 	ns = 1000000000 / hz;
 
-//TODO
-#if 0
-	if (have EXTIF) {
-		/* Initialize extif so we can get to the LEDs and external UART */
-		W_REG(&eir->prog_config, CF_EN);
-
-		/* Set timing for the flash */
-		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-		tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
-		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
-		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
-
-		/* Set programmable interface timing for external uart */
-		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-		tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
-		tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
-		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
-		W_REG(&eir->prog_waitcount, tmp);
-	}
-	else... chipcommon
-#endif
-	if (bus->chipco.dev)
+	if (bus->extif.dev)
+		ssb_extif_timing_init(&bus->extif, ns);
+	else if (bus->chipco.dev)
 		ssb_chipco_timing_init(&bus->chipco, ns);
 
 	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
 	for (irq = 2, i = 0; i < bus->nr_devices; i++) {
 		dev = &(bus->devices[i]);
 		dev->irq = ssb_mips_irq(dev) + 2;
-		switch(dev->id.coreid) {
-			case SSB_DEV_USB11_HOST:
-				/* shouldn't need a separate irq line for non-4710, most of them have a proper
-				 * external usb controller on the pci */
-				if ((bus->chip_id == 0x4710) && (irq <= 4)) {
-					set_irq(dev, irq++);
-					break;
-				}
-			case SSB_DEV_PCI:
-			case SSB_DEV_ETHERNET:
-			case SSB_DEV_80211:
-			case SSB_DEV_USB20_HOST:
-				/* These devices get their own IRQ line if available, the rest goes on IRQ0 */
-				if (irq <= 4) {
-					set_irq(dev, irq++);
-					break;
-				}
+		switch (dev->id.coreid) {
+		case SSB_DEV_USB11_HOST:
+			/* shouldn't need a separate irq line for non-4710, most of them have a proper
+			 * external usb controller on the pci */
+			if ((bus->chip_id == 0x4710) && (irq <= 4)) {
+				set_irq(dev, irq++);
+				break;
+			}
+			/* fallthrough */
+		case SSB_DEV_PCI:
+		case SSB_DEV_ETHERNET:
+		case SSB_DEV_80211:
+		case SSB_DEV_USB20_HOST:
+			/* These devices get their own IRQ line if available, the rest goes on IRQ0 */
+			if (irq <= 4) {
+				set_irq(dev, irq++);
+				break;
+			}
 		}
 	}
 
diff --git a/target/linux/generic-2.6/files/drivers/ssb/driver_pcicore.c b/target/linux/generic-2.6/files/drivers/ssb/driver_pcicore.c
index a59dff0..2faaa90 100644
--- a/target/linux/generic-2.6/files/drivers/ssb/driver_pcicore.c
+++ b/target/linux/generic-2.6/files/drivers/ssb/driver_pcicore.c
@@ -34,8 +34,10 @@ void pcicore_write32(struct ssb_pcicore *pc, u16 offset, u32 value)
 #ifdef CONFIG_SSB_PCICORE_HOSTMODE
 
 #include <asm/paccess.h>
-/* Read the bus and catch bus exceptions. This is MIPS specific. */
-#define mips_busprobe(val, addr)	get_dbe((val), (addr))
+/* Probe a 32bit value on the bus and catch bus exceptions.
+ * Returns nonzero on a bus exception.
+ * This is MIPS specific */
+#define mips_busprobe32(val, addr)	get_dbe((val), ((u32 *)(addr)))
 
 /* Assume one-hot slot wiring */
 #define SSB_PCI_SLOT_MAX	16
@@ -45,8 +47,8 @@ static DEFINE_SPINLOCK(cfgspace_lock);
 /* Core to access the external PCI config space. Can only have one. */
 static struct ssb_pcicore *extpci_core;
 
-u32 pci_iobase = 0x100;
-u32 pci_membase = SSB_PCI_DMA;
+static u32 ssb_pcicore_pcibus_iobase = 0x100;
+static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
 
 int pcibios_plat_dev_init(struct pci_dev *d)
 {
@@ -54,12 +56,16 @@ int pcibios_plat_dev_init(struct pci_dev *d)
 	int pos, size;
 	u32 *base;
 
-	printk("PCI: Fixing up device %s\n", pci_name(d));
+	ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+		   pci_name(d));
 
 	/* Fix up resource bases */
 	for (pos = 0; pos < 6; pos++) {
 		res = &d->resource[pos];
-		base = ((res->flags & IORESOURCE_IO) ? &pci_iobase : &pci_membase);
+		if (res->flags & IORESOURCE_IO)
+			base = &ssb_pcicore_pcibus_iobase;
+		else
+			base = &ssb_pcicore_pcibus_membase;
 		if (res->end) {
 			size = res->end - res->start + 1;
 			if (*base & (size - 1))
@@ -85,7 +91,7 @@ static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
 	if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
 		return;
 
-	printk("PCI: fixing up bridge\n");
+	ssb_printk(KERN_INFO "PCI: fixing up bridge\n");
 
 	/* Enable PCI bridge bus mastering and memory space */
 	pci_set_master(dev);
@@ -93,10 +99,13 @@ static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
 
 	/* Enable PCI bridge BAR1 prefetch and burst */
 	pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
+
+	/* Make sure our latency is high enough to handle the devices behind us */
+	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
 
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return ssb_mips_irq(extpci_core->dev) + 2;
 }
@@ -147,7 +156,7 @@ static int ssb_extpci_read_config(struct ssb_pcicore *pc,
 	u32 addr, val;
 	void __iomem *mmio;
 
-	assert(pc->hostmode);
+	SSB_WARN_ON(!pc->hostmode);
 	if (unlikely(len != 1 && len != 2 && len != 4))
 		goto out;
 	addr = get_cfgspace_addr(pc, bus, dev, func, off);
@@ -158,7 +167,7 @@ static int ssb_extpci_read_config(struct ssb_pcicore *pc,
 	if (!mmio)
 		goto out;
 
-	if (mips_busprobe(val, (u32 *) mmio)) {
+	if (mips_busprobe32(val, mmio)) {
 		val = 0xffffffff;
 		goto unmap;
 	}
@@ -193,7 +202,7 @@ static int ssb_extpci_write_config(struct ssb_pcicore *pc,
 	u32 addr, val = 0;
 	void __iomem *mmio;
 
-	assert(pc->hostmode);
+	SSB_WARN_ON(!pc->hostmode);
 	if (unlikely(len != 1 && len != 2 && len != 4))
 		goto out;
 	addr = get_cfgspace_addr(pc, bus, dev, func, off);
@@ -204,7 +213,7 @@ static int ssb_extpci_write_config(struct ssb_pcicore *pc,
 	if (!mmio)
 		goto out;
 
-	if (mips_busprobe(val, (u32 *) mmio)) {
+	if (mips_busprobe32(val, mmio)) {
 		val = 0xffffffff;
 		goto unmap;
 	}
@@ -224,7 +233,7 @@ static int ssb_extpci_write_config(struct ssb_pcicore *pc,
 		val = *((const u32 *)buf);
 		break;
 	}
-	writel(*((const u32 *)buf), mmio);
+	writel(val, mmio);
 
 	err = 0;
 unmap:
@@ -269,7 +278,7 @@ static struct pci_ops ssb_pcicore_pciops = {
 static struct resource ssb_pcicore_mem_resource = {
 	.name	= "SSB PCIcore external memory",
 	.start	= SSB_PCI_DMA,
-	.end	= (u32)SSB_PCI_DMA + (u32)SSB_PCI_DMA_SZ - 1,
+	.end	= SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
@@ -291,10 +300,8 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
 {
 	u32 val;
 
-	if (extpci_core) {
-		WARN_ON(1);
+	if (WARN_ON(extpci_core))
 		return;
-	}
 	extpci_core = pc;
 
 	ssb_dprintk(KERN_INFO PFX "PCIcore in host mode found\n");
@@ -304,12 +311,14 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
 	pcicore_write32(pc, SSB_PCICORE_CTL, val);
 	val |= SSB_PCICORE_CTL_CLK; /* Clock on */
 	pcicore_write32(pc, SSB_PCICORE_CTL, val);
-	udelay(150);
+	udelay(150); /* Assertion time demanded by the PCI standard */
 	val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */
 	pcicore_write32(pc, SSB_PCICORE_CTL, val);
-	udelay(1);
+	val = SSB_PCICORE_ARBCTL_INTERN;
+	pcicore_write32(pc, SSB_PCICORE_ARBCTL, val);
+	udelay(1); /* Assertion time demanded by the PCI standard */
 
-	//TODO cardbus mode
+	/*TODO cardbus mode */
 
 	/* 64MB I/O window */
 	pcicore_write32(pc, SSB_PCICORE_SBTOPCI0,
@@ -336,6 +345,9 @@ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
 	 * The following needs change, if we want to port hostmode
 	 * to non-MIPS platform. */
 	set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000));
+	/* Give some time to the PCI controller to configure itself with the new
+	 * values. Not waiting at this point causes crashes of the machine. */
+	mdelay(10);
 	register_pci_controller(&ssb_pcicore_controller);
 }
 
@@ -364,7 +376,7 @@ static int pcicore_is_in_hostmode(struct ssb_pcicore *pc)
 	if (bus->chip_id == 0x5350)
 		return 0;
 
-	return !mips_busprobe(tmp, (u32 *) (bus->mmio + (pc->dev->core_index * SSB_CORE_SIZE)));
+	return !mips_busprobe32(tmp, (bus->mmio + (pc->dev->core_index * SSB_CORE_SIZE)));
 }
 #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
 
@@ -430,6 +442,7 @@ static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device,
 	v |= (u32)address << 18;
 	v |= data;
 	pcicore_write32(pc, mdio_data, v);
+	/* Wait for the device to complete the transaction */
 	udelay(10);
 	for (i = 0; i < 10; i++) {
 		v = pcicore_read32(pc, mdio_control);
@@ -458,7 +471,8 @@ static void ssb_commit_settings(struct ssb_bus *bus)
 	struct ssb_device *dev;
 
 	dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev;
-	assert(dev);
+	if (WARN_ON(!dev))
+		return;
 	/* This forces an update of the cached registers. */
 	ssb_broadcast_value(dev, 0xFD8, 0);
 }
@@ -496,9 +510,15 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
 		u32 intvec;
 
 		intvec = ssb_read32(pdev, SSB_INTVEC);
-		tmp = ssb_read32(dev, SSB_TPSFLAG);
-		tmp &= SSB_TPSFLAG_BPFLAG;
-		intvec |= tmp;
+		if ((bus->chip_id & 0xFF00) == 0x4400) {
+			/* Workaround: On the BCM44XX the BPFLAG routing
+			 * bit is wrong. Use a hardcoded constant. */
+			intvec |= 0x00000002;
+		} else {
+			tmp = ssb_read32(dev, SSB_TPSFLAG);
+			tmp &= SSB_TPSFLAG_BPFLAG;
+			intvec |= tmp;
+		}
 		ssb_write32(pdev, SSB_INTVEC, intvec);
 	}
 
@@ -525,7 +545,7 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
 			pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp);
 		}
 	} else {
-		assert(pdev->id.coreid == SSB_DEV_PCIE);
+		WARN_ON(pdev->id.coreid != SSB_DEV_PCIE);
 		//TODO: Better make defines for all these magic PCIE values.
 		if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) {
 			/* TLP Workaround register. */
diff --git a/target/linux/generic-2.6/files/drivers/ssb/main.c b/target/linux/generic-2.6/files/drivers/ssb/main.c
index a892f1d..74d5182 100644
--- a/target/linux/generic-2.6/files/drivers/ssb/main.c
+++ b/target/linux/generic-2.6/files/drivers/ssb/main.c
@@ -13,34 +13,43 @@
 #include <linux/delay.h>
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_regs.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
 
-#ifdef CONFIG_SSB_PCIHOST
-# include <linux/pci.h>
-#endif
-
-#ifdef CONFIG_SSB_PCMCIAHOST
-# include <pcmcia/cs_types.h>
-# include <pcmcia/cs.h>
-# include <pcmcia/cistpl.h>
-# include <pcmcia/ds.h>
-#endif
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
 
 
 MODULE_DESCRIPTION("Sonics Silicon Backplane driver");
 MODULE_LICENSE("GPL");
 
 
+/* Temporary list of yet-to-be-attached buses */
 static LIST_HEAD(attach_queue);
+/* List if running buses */
 static LIST_HEAD(buses);
+/* Software ID counter */
 static unsigned int next_busnumber;
+/* buses_mutes locks the two buslists and the next_busnumber.
+ * Don't lock this directly, but use ssb_buses_[un]lock() below. */
 static DEFINE_MUTEX(buses_mutex);
 
+/* There are differences in the codeflow, if the bus is
+ * initialized from early boot, as various needed services
+ * are not available early. This is a mechanism to delay
+ * these initializations to after early boot has finished.
+ * It's also used to avoid mutex locking, as that's not
+ * available and needed early. */
+static bool ssb_is_early_boot = 1;
+
 static void ssb_buses_lock(void);
 static void ssb_buses_unlock(void);
 
 
 #ifdef CONFIG_SSB_PCIHOST
-struct ssb_bus * ssb_pci_dev_to_bus(struct pci_dev *pdev)
+struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev)
 {
 	struct ssb_bus *bus;
 
@@ -58,7 +67,7 @@ found:
 }
 #endif /* CONFIG_SSB_PCIHOST */
 
-static struct ssb_device * ssb_device_get(struct ssb_device *dev)
+static struct ssb_device *ssb_device_get(struct ssb_device *dev)
 {
 	if (dev)
 		get_device(dev->dev);
@@ -122,6 +131,9 @@ static void ssb_bus_suspend(struct ssb_bus *bus, pm_message_t state)
 #ifdef CONFIG_SSB_DRIVER_PCICORE
 	bus->pcicore.setup_done = 0;
 #endif
+#ifdef CONFIG_SSB_DEBUG
+	bus->powered_up = 0;
+#endif
 }
 
 static int ssb_device_suspend(struct device *dev, pm_message_t state)
@@ -159,20 +171,53 @@ int ssb_devices_freeze(struct ssb_bus *bus)
 	int i;
 	pm_message_t state = PMSG_FREEZE;
 
+	/* First check that we are capable to freeze all devices. */
 	for (i = 0; i < bus->nr_devices; i++) {
 		dev = &(bus->devices[i]);
-		if (!dev->dev->driver)
+		if (!dev->dev ||
+		    !dev->dev->driver ||
+		    !device_is_registered(dev->dev))
 			continue;
-		if (!device_is_registered(dev->dev))
+		drv = drv_to_ssb_drv(dev->dev->driver);
+		if (!drv)
+			continue;
+		if (!drv->suspend) {
+			/* Nope, can't suspend this one. */
+			return -EOPNOTSUPP;
+		}
+	}
+	/* Now suspend all devices */
+	for (i = 0; i < bus->nr_devices; i++) {
+		dev = &(bus->devices[i]);
+		if (!dev->dev ||
+		    !dev->dev->driver ||
+		    !device_is_registered(dev->dev))
 			continue;
 		drv = drv_to_ssb_drv(dev->dev->driver);
-		if (drv && drv->suspend) {
-			err = drv->suspend(dev, state);
-			if (err)
-				goto out;
+		if (!drv)
+			continue;
+		err = drv->suspend(dev, state);
+		if (err) {
+			ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
+				   dev->dev->bus_id);
+			goto err_unwind;
 		}
 	}
-out:
+
+	return 0;
+err_unwind:
+	for (i--; i >= 0; i--) {
+		dev = &(bus->devices[i]);
+		if (!dev->dev ||
+		    !dev->dev->driver ||
+		    !device_is_registered(dev->dev))
+			continue;
+		drv = drv_to_ssb_drv(dev->dev->driver);
+		if (!drv)
+			continue;
+		if (drv->resume)
+			drv->resume(dev);
+	}
 	return err;
 }
 
@@ -180,24 +225,28 @@ int ssb_devices_thaw(struct ssb_bus *bus)
 {
 	struct ssb_device *dev;
 	struct ssb_driver *drv;
-	int err = 0;
+	int err;
 	int i;
 
 	for (i = 0; i < bus->nr_devices; i++) {
 		dev = &(bus->devices[i]);
-		if (!dev->dev->driver)
-			continue;
-		if (!device_is_registered(dev->dev))
+		if (!dev->dev ||
+		    !dev->dev->driver ||
+		    !device_is_registered(dev->dev))
 			continue;
 		drv = drv_to_ssb_drv(dev->dev->driver);
-		if (drv && drv->resume) {
-			err = drv->resume(dev);
-			if (err)
-				goto out;
+		if (!drv)
+			continue;
+		if (SSB_WARN_ON(!drv->resume))
+			continue;
+		err = drv->resume(dev);
+		if (err) {
+			ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n",
+				   dev->dev->bus_id);
 		}
 	}
-out:
-	return err;
+
+	return 0;
 }
 #endif /* CONFIG_SSB_PCIHOST */
 
@@ -271,27 +320,47 @@ static int ssb_bus_match(struct device *dev, struct device_driver *drv)
 	return 0;
 }
 
+static int ssb_device_uevent(struct device *dev, char **envp, int num_envp,
+			     char *buffer, int buffer_size)
+{
+	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
+	int ret, i = 0, length = 0;
+
+	if (!dev)
+		return -ENODEV;
+
+	ret = add_uevent_var(envp, num_envp, &i,
+			     buffer, buffer_size, &length,
+			     "MODALIAS=ssb:v%04Xid%04Xrev%02X",
+			     ssb_dev->id.vendor, ssb_dev->id.coreid,
+			     ssb_dev->id.revision);
+	envp[i] = NULL;
+
+	return ret;
+}
+
 static struct bus_type ssb_bustype = {
-	.name		= NULL, /* Intentionally NULL to indicate early boot */
+	.name		= "ssb",
 	.match		= ssb_bus_match,
 	.probe		= ssb_device_probe,
 	.remove		= ssb_device_remove,
 	.shutdown	= ssb_device_shutdown,
 	.suspend	= ssb_device_suspend,
 	.resume		= ssb_device_resume,
+	.uevent		= ssb_device_uevent,
 };
 
-#define is_early_boot()		(ssb_bustype.name == NULL)
-
 static void ssb_buses_lock(void)
 {
-	if (!is_early_boot())
+	/* See the comment at the ssb_is_early_boot definition */
+	if (!ssb_is_early_boot)
 		mutex_lock(&buses_mutex);
 }
 
 static void ssb_buses_unlock(void)
 {
-	if (!is_early_boot())
+	/* See the comment at the ssb_is_early_boot definition */
+	if (!ssb_is_early_boot)
 		mutex_unlock(&buses_mutex);
 }
 
@@ -421,9 +490,14 @@ static int ssb_attach_queued_buses(void)
 		 * is too early in boot for embedded systems
 		 * (no udelay() available). So do it here in attach stage.
 		 */
+		err = ssb_bus_powerup(bus, 0);
+		if (err)
+			goto error;
 		ssb_pcicore_init(&bus->pcicore);
+		ssb_bus_may_powerdown(bus);
 
 		err = ssb_devices_register(bus);
+error:
 		if (err) {
 			drop_them_all = 1;
 			list_del(&bus->list);
@@ -467,6 +541,7 @@ static void ssb_ssb_write32(struct ssb_device *dev, u16 offset, u32 value)
 	writel(value, bus->mmio + offset);
 }
 
+/* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */
 static const struct ssb_bus_ops ssb_ssb_ops = {
 	.read16		= ssb_ssb_read16,
 	.read32		= ssb_ssb_read32,
@@ -475,8 +550,7 @@ static const struct ssb_bus_ops ssb_ssb_ops = {
 };
 
 static int ssb_fetch_invariants(struct ssb_bus *bus,
-				int (*get_invariants)(struct ssb_bus *bus,
-						      struct ssb_init_invariants *iv))
+				ssb_invariants_func_t get_invariants)
 {
 	struct ssb_init_invariants iv;
 	int err;
@@ -492,8 +566,7 @@ out:
 }
 
 static int ssb_bus_register(struct ssb_bus *bus,
-			    int (*get_invariants)(struct ssb_bus *bus,
-			    			  struct ssb_init_invariants *iv),
+			    ssb_invariants_func_t get_invariants,
 			    unsigned long baseaddr)
 {
 	int err;
@@ -522,15 +595,22 @@ static int ssb_bus_register(struct ssb_bus *bus,
 		goto err_pci_exit;
 
 	/* Initialize basic system devices (if available) */
+	err = ssb_bus_powerup(bus, 0);
+	if (err)
+		goto err_pcmcia_exit;
 	ssb_chipcommon_init(&bus->chipco);
 	ssb_mipscore_init(&bus->mipscore);
 	err = ssb_fetch_invariants(bus, get_invariants);
-	if (err)
+	if (err) {
+		ssb_bus_may_powerdown(bus);
 		goto err_pcmcia_exit;
+	}
+	ssb_bus_may_powerdown(bus);
 
-	/* Queue it for attach */
+	/* Queue it for attach.
+	 * See the comment at the ssb_is_early_boot definition. */
 	list_add_tail(&bus->list, &attach_queue);
-	if (!is_early_boot()) {
+	if (!ssb_is_early_boot) {
 		/* This is not early boot, so we must attach the bus now */
 		err = ssb_attach_queued_buses();
 		if (err)
@@ -601,8 +681,7 @@ EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
 
 int ssb_bus_ssbbus_register(struct ssb_bus *bus,
 			    unsigned long baseaddr,
-			    int (*get_invariants)(struct ssb_bus *bus,
-			    			  struct ssb_init_invariants *iv))
+			    ssb_invariants_func_t get_invariants)
 {
 	int err;
 
@@ -695,13 +774,13 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
 	case SSB_PLLTYPE_2: /* 48Mhz, 4 dividers */
 		n1 += SSB_CHIPCO_CLK_T2_BIAS;
 		n2 += SSB_CHIPCO_CLK_T2_BIAS;
-		assert((n1 >= 2) && (n1 <= 7));
-		assert((n2 >= 5) && (n2 <= 23));
+		SSB_WARN_ON(!((n1 >= 2) && (n1 <= 7)));
+		SSB_WARN_ON(!((n2 >= 5) && (n2 <= 23)));
 		break;
 	case SSB_PLLTYPE_5: /* 25Mhz, 4 dividers */
 		return 100000000;
 	default:
-		assert(0);
+		SSB_WARN_ON(1);
 	}
 
 	switch (plltype) {
@@ -750,9 +829,9 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
 		m1 += SSB_CHIPCO_CLK_T2_BIAS;
 		m2 += SSB_CHIPCO_CLK_T2M2_BIAS;
 		m3 += SSB_CHIPCO_CLK_T2_BIAS;
-		assert((m1 >= 2) && (m1 <= 7));
-		assert((m2 >= 3) && (m2 <= 10));
-		assert((m3 >= 2) && (m3 <= 7));
+		SSB_WARN_ON(!((m1 >= 2) && (m1 <= 7)));
+		SSB_WARN_ON(!((m2 >= 3) && (m2 <= 10)));
+		SSB_WARN_ON(!((m3 >= 2) && (m3 <= 7)));
 
 		if (!(mc & SSB_CHIPCO_CLK_T2MC_M1BYP))
 			clock /= m1;
@@ -762,7 +841,7 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m)
 			clock /= m3;
 		return clock;
 	default:
-		assert(0);
+		SSB_WARN_ON(1);
 	}
 	return 0;
 }
@@ -774,12 +853,13 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
 	u32 plltype;
 	u32 clkctl_n, clkctl_m;
 
-	//TODO if EXTIF: PLLTYPE == 1, read n from clockcontrol_n, m from clockcontrol_sb
-
-	if (bus->chipco.dev) {
+	if (ssb_extif_available(&bus->extif))
+		ssb_extif_get_clockcontrol(&bus->extif, &plltype,
+					   &clkctl_n, &clkctl_m);
+	else if (bus->chipco.dev)
 		ssb_chipco_get_clockcontrol(&bus->chipco, &plltype,
 					    &clkctl_n, &clkctl_m);
-	} else
+	else
 		return 0;
 
 	if (bus->chip_id == 0x5365) {
@@ -804,7 +884,7 @@ static u32 ssb_tmslow_reject_bitmask(struct ssb_device *dev)
 	case SSB_IDLOW_SSBREV_23:
 		return SSB_TMSLOW_REJECT_23;
 	default:
-		assert(0);
+		WARN_ON(1);
 	}
 	return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23);
 }
@@ -822,6 +902,18 @@ int ssb_device_is_enabled(struct ssb_device *dev)
 }
 EXPORT_SYMBOL(ssb_device_is_enabled);
 
+static void ssb_flush_tmslow(struct ssb_device *dev)
+{
+	/* Make _really_ sure the device has finished the TMSLOW
+	 * register write transaction, as we risk running into
+	 * a machine check exception otherwise.
+	 * Do this by reading the register back to commit the
+	 * PCI write and delay an additional usec for the device
+	 * to react to the change. */
+	ssb_read32(dev, SSB_TMSLOW);
+	udelay(1);
+}
+
 void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
 {
 	u32 val;
@@ -830,9 +922,7 @@ void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
 	ssb_write32(dev, SSB_TMSLOW,
 		    SSB_TMSLOW_RESET | SSB_TMSLOW_CLOCK |
 		    SSB_TMSLOW_FGC | core_specific_flags);
-	/* flush */
-	ssb_read32(dev, SSB_TMSLOW);
-	udelay(1);
+	ssb_flush_tmslow(dev);
 
 	/* Clear SERR if set. This is a hw bug workaround. */
 	if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_SERR)
@@ -847,18 +937,16 @@ void ssb_device_enable(struct ssb_device *dev, u32 core_specific_flags)
 	ssb_write32(dev, SSB_TMSLOW,
 		    SSB_TMSLOW_CLOCK | SSB_TMSLOW_FGC |
 		    core_specific_flags);
-	/* flush */
-	ssb_read32(dev, SSB_TMSLOW);
-	udelay(1);
+	ssb_flush_tmslow(dev);
 
 	ssb_write32(dev, SSB_TMSLOW, SSB_TMSLOW_CLOCK |
 		    core_specific_flags);
-	/* flush */
-	ssb_read32(dev, SSB_TMSLOW);
-	udelay(1);
+	ssb_flush_tmslow(dev);
 }
 EXPORT_SYMBOL(ssb_device_enable);
 
+/* Wait for a bit in a register to get set or unset.
+ * timeout is in units of ten-microseconds */
 static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask,
 			int timeout, int set)
 {
@@ -898,22 +986,18 @@ void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
 		    SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK |
 		    reject | SSB_TMSLOW_RESET |
 		    core_specific_flags);
-	/* flush */
-	ssb_read32(dev, SSB_TMSLOW);
-	udelay(1);
+	ssb_flush_tmslow(dev);
 
 	ssb_write32(dev, SSB_TMSLOW,
 		    reject | SSB_TMSLOW_RESET |
 		    core_specific_flags);
-	/* flush */
-	ssb_read32(dev, SSB_TMSLOW);
-	udelay(1);
+	ssb_flush_tmslow(dev);
 }
 EXPORT_SYMBOL(ssb_device_disable);
 
 u32 ssb_dma_translation(struct ssb_device *dev)
 {
-	switch(dev->bus->bustype) {
+	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_SSB:
 		return 0;
 	case SSB_BUSTYPE_PCI:
@@ -943,28 +1027,31 @@ EXPORT_SYMBOL(ssb_dma_set_mask);
 int ssb_bus_may_powerdown(struct ssb_bus *bus)
 {
 	struct ssb_chipcommon *cc;
-	int err;
+	int err = 0;
 
 	/* On buses where more than one core may be working
 	 * at a time, we must not powerdown stuff if there are
 	 * still cores that may want to run. */
 	if (bus->bustype == SSB_BUSTYPE_SSB)
-		return 0;
+		goto out;
 
 	cc = &bus->chipco;
 	ssb_chipco_set_clockmode(cc, SSB_CLKMODE_SLOW);
 	err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
 	if (err)
 		goto error;
-
-	return 0;
+out:
+#ifdef CONFIG_SSB_DEBUG
+	bus->powered_up = 0;
+#endif
+	return err;
 error:
 	ssb_printk(KERN_ERR PFX "Bus powerdown failed\n");
-	return err;
+	goto out;
 }
 EXPORT_SYMBOL(ssb_bus_may_powerdown);
 
-int ssb_bus_powerup(struct ssb_bus *bus, int dynamic_pctl)
+int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
 {
 	struct ssb_chipcommon *cc;
 	int err;
@@ -977,6 +1064,9 @@ int ssb_bus_powerup(struct ssb_bus *bus, int dynamic_pctl)
 	mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST;
 	ssb_chipco_set_clockmode(cc, mode);
 
+#ifdef CONFIG_SSB_DEBUG
+	bus->powered_up = 1;
+#endif
 	return 0;
 error:
 	ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
@@ -993,15 +1083,15 @@ u32 ssb_admatch_base(u32 adm)
 		base = (adm & SSB_ADM_BASE0);
 		break;
 	case SSB_ADM_TYPE1:
-		assert(!(adm & SSB_ADM_NEG)); /* unsupported */
+		SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
 		base = (adm & SSB_ADM_BASE1);
 		break;
 	case SSB_ADM_TYPE2:
-		assert(!(adm & SSB_ADM_NEG)); /* unsupported */
+		SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
 		base = (adm & SSB_ADM_BASE2);
 		break;
 	default:
-		assert(0);
+		SSB_WARN_ON(1);
 	}
 
 	return base;
@@ -1017,15 +1107,15 @@ u32 ssb_admatch_size(u32 adm)
 		size = ((adm & SSB_ADM_SZ0) >> SSB_ADM_SZ0_SHIFT);
 		break;
 	case SSB_ADM_TYPE1:
-		assert(!(adm & SSB_ADM_NEG)); /* unsupported */
+		SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
 		size = ((adm & SSB_ADM_SZ1) >> SSB_ADM_SZ1_SHIFT);
 		break;
 	case SSB_ADM_TYPE2:
-		assert(!(adm & SSB_ADM_NEG)); /* unsupported */
+		SSB_WARN_ON(adm & SSB_ADM_NEG); /* unsupported */
 		size = ((adm & SSB_ADM_SZ2) >> SSB_ADM_SZ2_SHIFT);
 		break;
 	default:
-		assert(0);
+		SSB_WARN_ON(1);
 	}
 	size = (1 << (size + 1));
 
@@ -1037,7 +1127,8 @@ static int __init ssb_modinit(void)
 {
 	int err;
 
-	ssb_bustype.name = "ssb";
+	/* See the comment at the ssb_is_early_boot definition */
+	ssb_is_early_boot = 0;
 	err = bus_register(&ssb_bustype);
 	if (err)
 		return err;
@@ -1051,12 +1142,21 @@ static int __init ssb_modinit(void)
 	if (err)
 		bus_unregister(&ssb_bustype);
 
+	err = b43_pci_ssb_bridge_init();
+	if (err) {
+		ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+			   "initialization failed");
+		/* don't fail SSB init because of this */
+		err = 0;
+	}
+
 	return err;
 }
 subsys_initcall(ssb_modinit);
 
 static void __exit ssb_modexit(void)
 {
+	b43_pci_ssb_bridge_exit();
 	bus_unregister(&ssb_bustype);
 }
 module_exit(ssb_modexit)
diff --git a/target/linux/generic-2.6/files/drivers/ssb/pci.c b/target/linux/generic-2.6/files/drivers/ssb/pci.c
index f9dc28f..0ab095c 100644
--- a/target/linux/generic-2.6/files/drivers/ssb/pci.c
+++ b/target/linux/generic-2.6/files/drivers/ssb/pci.c
@@ -23,6 +23,11 @@
 #include "ssb_private.h"
 
 
+/* Define the following to 1 to enable a printk on each coreswitch. */
+#define SSB_VERBOSE_PCICORESWITCH_DEBUG		0
+
+
+/* Lowlevel coreswitching */
 int ssb_pci_switch_coreidx(struct ssb_bus *bus, u8 coreidx)
 {
 	int err;
@@ -60,10 +65,12 @@ int ssb_pci_switch_core(struct ssb_bus *bus,
 	int err;
 	unsigned long flags;
 
-	ssb_dprintk(KERN_INFO PFX
-		    "Switching to %s core, index %d\n",
-		    ssb_core_name(dev->id.coreid),
-		    dev->core_index);
+#if SSB_VERBOSE_PCICORESWITCH_DEBUG
+	ssb_printk(KERN_INFO PFX
+		   "Switching to %s core, index %d\n",
+		   ssb_core_name(dev->id.coreid),
+		   dev->core_index);
+#endif
 
 	spin_lock_irqsave(&bus->bar_lock, flags);
 	err = ssb_pci_switch_coreidx(bus, dev->core_index);
@@ -74,6 +81,7 @@ int ssb_pci_switch_core(struct ssb_bus *bus,
 	return err;
 }
 
+/* Enable/disable the on board crystal oscillator and/or PLL. */
 int ssb_pci_xtal(struct ssb_bus *bus, u32 what, int turn_on)
 {
 	int err;
@@ -158,7 +166,9 @@ err_pci:
 	goto out;
 }
 
+/* Get the word-offset for a SSB_SPROM_XXX define. */
 #define SPOFF(offset)	(((offset) - SSB_SPROM_BASE) / sizeof(u16))
+/* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
 #define SPEX(_outvar, _offset, _mask, _shift)	\
 	out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
 
@@ -296,15 +306,15 @@ static void sprom_extract_r1(struct ssb_sprom_r1 *out, const u16 *in)
 	SPEX(pci_pid, SSB_SPROM1_PID, 0xFFFF, 0);
 	for (i = 0; i < 3; i++) {
 		v = in[SPOFF(SSB_SPROM1_IL0MAC) + i];
-		*(((u16 *)out->il0mac) + i) = cpu_to_be16(v);
+		*(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
 	}
 	for (i = 0; i < 3; i++) {
 		v = in[SPOFF(SSB_SPROM1_ET0MAC) + i];
-		*(((u16 *)out->et0mac) + i) = cpu_to_be16(v);
+		*(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
 	}
 	for (i = 0; i < 3; i++) {
 		v = in[SPOFF(SSB_SPROM1_ET1MAC) + i];
-		*(((u16 *)out->et1mac) + i) = cpu_to_be16(v);
+		*(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
 	}
 	SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
 	SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
@@ -342,7 +352,7 @@ static void sprom_extract_r1(struct ssb_sprom_r1 *out, const u16 *in)
 	     SSB_SPROM1_AGAIN_BG_SHIFT);
 	for (i = 0; i < 4; i++) {
 		v = in[SPOFF(SSB_SPROM1_OEM) + i];
-		*(((u16 *)out->oem) + i) = cpu_to_le16(v);
+		*(((__le16 *)out->oem) + i) = cpu_to_le16(v);
 	}
 }
 
@@ -364,7 +374,7 @@ static void sprom_extract_r2(struct ssb_sprom_r2 *out, const u16 *in)
 	SPEX(ofdm_pwr_off, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0);
 	for (i = 0; i < 4; i++) {
 		v = in[SPOFF(SSB_SPROM2_CCODE) + i];
-		*(((u16 *)out->country_str) + i) = cpu_to_le16(v);
+		*(((__le16 *)out->country_str) + i) = cpu_to_le16(v);
 	}
 }
 
@@ -489,50 +499,81 @@ out:
 	return err;
 }
 
+#ifdef CONFIG_SSB_DEBUG
+static int ssb_pci_assert_buspower(struct ssb_bus *bus)
+{
+	if (likely(bus->powered_up))
+		return 0;
+
+	printk(KERN_ERR PFX "FATAL ERROR: Bus powered down "
+	       "while accessing PCI MMIO space\n");
+	if (bus->power_warn_count <= 10) {
+		bus->power_warn_count++;
+		dump_stack();
+	}
+
+	return -ENODEV;
+}
+#else /* DEBUG */
+static inline int ssb_pci_assert_buspower(struct ssb_bus *bus)
+{
+	return 0;
+}
+#endif /* DEBUG */
+
 static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset)
 {
 	struct ssb_bus *bus = dev->bus;
 
+	if (unlikely(ssb_pci_assert_buspower(bus)))
+		return 0xFFFF;
 	if (unlikely(bus->mapped_device != dev)) {
 		if (unlikely(ssb_pci_switch_core(bus, dev)))
 			return 0xFFFF;
 	}
-	return readw(bus->mmio + offset);
+	return ioread16(bus->mmio + offset);
 }
 
 static u32 ssb_pci_read32(struct ssb_device *dev, u16 offset)
 {
 	struct ssb_bus *bus = dev->bus;
 
+	if (unlikely(ssb_pci_assert_buspower(bus)))
+		return 0xFFFFFFFF;
 	if (unlikely(bus->mapped_device != dev)) {
 		if (unlikely(ssb_pci_switch_core(bus, dev)))
 			return 0xFFFFFFFF;
 	}
-	return readl(bus->mmio + offset);
+	return ioread32(bus->mmio + offset);
 }
 
 static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value)
 {
 	struct ssb_bus *bus = dev->bus;
 
+	if (unlikely(ssb_pci_assert_buspower(bus)))
+		return;
 	if (unlikely(bus->mapped_device != dev)) {
 		if (unlikely(ssb_pci_switch_core(bus, dev)))
 			return;
 	}
-	writew(value, bus->mmio + offset);
+	iowrite16(value, bus->mmio + offset);
 }
 
 static void ssb_pci_write32(struct ssb_device *dev, u16 offset, u32 value)
 {
 	struct ssb_bus *bus = dev->bus;
 
+	if (unlikely(ssb_pci_assert_buspower(bus)))
+		return;
 	if (unlikely(bus->mapped_device != dev)) {
 		if (unlikely(ssb_pci_switch_core(bus, dev)))
 			return;
 	}
-	writel(value, bus->mmio + offset);
+	iowrite32(value, bus->mmio + offset);
 }
 
+/* Not "static", as it's used in main.c */
 const struct ssb_bus_ops ssb_pci_ops = {
 	.read16		= ssb_pci_read16,
 	.read32		= ssb_pci_read32,
@@ -590,6 +631,9 @@ static ssize_t ssb_pci_attr_sprom_show(struct device *pcidev,
 	if (!sprom)
 		goto out;
 
+	/* Use interruptible locking, as the SPROM write might
+	 * be holding the lock for several seconds. So allow userspace
+	 * to cancel operation. */
 	err = -ERESTARTSYS;
 	if (mutex_lock_interruptible(&bus->pci_sprom_mutex))
 		goto out_kfree;
@@ -632,10 +676,18 @@ static ssize_t ssb_pci_attr_sprom_store(struct device *pcidev,
 		goto out_kfree;
 	}
 
+	/* Use interruptible locking, as the SPROM write might
+	 * be holding the lock for several seconds. So allow userspace
+	 * to cancel operation. */
 	err = -ERESTARTSYS;
 	if (mutex_lock_interruptible(&bus->pci_sprom_mutex))
 		goto out_kfree;
 	err = ssb_devices_freeze(bus);
+	if (err == -EOPNOTSUPP) {
+		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. "
+			   "No suspend support. Is CONFIG_PM enabled?\n");
+		goto out_unlock;
+	}
 	if (err) {
 		ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n");
 		goto out_unlock;
diff --git a/target/linux/generic-2.6/files/drivers/ssb/pcmcia.c b/target/linux/generic-2.6/files/drivers/ssb/pcmcia.c
index b908563..7c77360 100644
--- a/target/linux/generic-2.6/files/drivers/ssb/pcmcia.c
+++ b/target/linux/generic-2.6/files/drivers/ssb/pcmcia.c
@@ -21,6 +21,10 @@
 #include "ssb_private.h"
 
 
+/* Define the following to 1 to enable a printk on each coreswitch. */
+#define SSB_VERBOSE_PCMCIACORESWITCH_DEBUG		0
+
+
 int ssb_pcmcia_switch_coreidx(struct ssb_bus *bus,
 			      u8 coreidx)
 {
@@ -91,10 +95,12 @@ int ssb_pcmcia_switch_core(struct ssb_bus *bus,
 	int err;
 	unsigned long flags;
 
-	ssb_dprintk(KERN_INFO PFX
-		    "Switching to %s core, index %d\n",
-		    ssb_core_name(dev->id.coreid),
-		    dev->core_index);
+#if SSB_VERBOSE_PCMCIACORESWITCH_DEBUG
+	ssb_printk(KERN_INFO PFX
+		   "Switching to %s core, index %d\n",
+		   ssb_core_name(dev->id.coreid),
+		   dev->core_index);
+#endif
 
 	spin_lock_irqsave(&bus->bar_lock, flags);
 	err = ssb_pcmcia_switch_coreidx(bus, dev->core_index);
@@ -112,7 +118,7 @@ int ssb_pcmcia_switch_segment(struct ssb_bus *bus, u8 seg)
 	conf_reg_t reg;
 	int res, err = 0;
 
-	assert(seg == 0 || seg == 1);
+	SSB_WARN_ON((seg != 0) && (seg != 1));
 	reg.Offset = 0x34;
 	reg.Function = 0;
 	spin_lock_irqsave(&bus->bar_lock, flags);
@@ -145,6 +151,9 @@ error:
 	goto out_unlock;
 }
 
+/* These are the main device register access functions.
+ * do_select_core is inline to have the likely hotpath inline.
+ * All unlikely codepaths are out-of-line. */
 static inline int do_select_core(struct ssb_bus *bus,
 				 struct ssb_device *dev,
 				 u16 *offset)
@@ -176,7 +185,7 @@ static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset)
 	if (unlikely(do_select_core(bus, dev, &offset)))
 		return 0xFFFF;
 	x = readw(bus->mmio + offset);
-//printk("R16 0x%04X, 0x%04X\n", offset, x);
+
 	return x;
 }
 
@@ -188,7 +197,7 @@ static u32 ssb_pcmcia_read32(struct ssb_device *dev, u16 offset)
 	if (unlikely(do_select_core(bus, dev, &offset)))
 		return 0xFFFFFFFF;
 	x = readl(bus->mmio + offset);
-//printk("R32 0x%04X, 0x%08X\n", offset, x);
+
 	return x;
 }
 
@@ -198,7 +207,6 @@ static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value)
 
 	if (unlikely(do_select_core(bus, dev, &offset)))
 		return;
-//printk("W16 0x%04X, 0x%04X\n", offset, value);
 	writew(value, bus->mmio + offset);
 }
 
@@ -208,13 +216,13 @@ static void ssb_pcmcia_write32(struct ssb_device *dev, u16 offset, u32 value)
 
 	if (unlikely(do_select_core(bus, dev, &offset)))
 		return;
-//printk("W32 0x%04X, 0x%08X\n", offset, value);
 	readw(bus->mmio + offset);
 	writew(value >> 16, bus->mmio + offset + 2);
 	readw(bus->mmio + offset);
 	writew(value, bus->mmio + offset);
 }
 
+/* Not "static", as it's used in main.c */
 const struct ssb_bus_ops ssb_pcmcia_ops = {
 	.read16		= ssb_pcmcia_read16,
 	.read32		= ssb_pcmcia_read32,
diff --git a/target/linux/generic-2.6/files/drivers/ssb/scan.c b/target/linux/generic-2.6/files/drivers/ssb/scan.c
index b5d909c..96258c6 100644
--- a/target/linux/generic-2.6/files/drivers/ssb/scan.c
+++ b/target/linux/generic-2.6/files/drivers/ssb/scan.c
@@ -15,19 +15,17 @@
 #include <linux/ssb/ssb.h>
 #include <linux/ssb/ssb_regs.h>
 #include <linux/pci.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
-#ifdef CONFIG_SSB_PCMCIAHOST
-# include <pcmcia/cs_types.h>
-# include <pcmcia/cs.h>
-# include <pcmcia/cistpl.h>
-# include <pcmcia/ds.h>
-#endif
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
 
 #include "ssb_private.h"
 
 
-const char * ssb_core_name(u16 coreid)
+const char *ssb_core_name(u16 coreid)
 {
 	switch (coreid) {
 	case SSB_DEV_CHIPCOMMON:
@@ -205,7 +203,7 @@ void ssb_iounmap(struct ssb_bus *bus)
 #ifdef CONFIG_SSB_PCIHOST
 		pci_iounmap(bus->host_pci, bus->mmio);
 #else
-		assert(0); /* Can't reach this code. */
+		SSB_BUG_ON(1); /* Can't reach this code. */
 #endif
 		break;
 	}
@@ -213,8 +211,8 @@ void ssb_iounmap(struct ssb_bus *bus)
 	bus->mapped_device = NULL;
 }
 
-static void __iomem * ssb_ioremap(struct ssb_bus *bus,
-				  unsigned long baseaddr)
+static void __iomem *ssb_ioremap(struct ssb_bus *bus,
+				 unsigned long baseaddr)
 {
 	void __iomem *mmio = NULL;
 
@@ -229,7 +227,7 @@ static void __iomem * ssb_ioremap(struct ssb_bus *bus,
 #ifdef CONFIG_SSB_PCIHOST
 		mmio = pci_iomap(bus->host_pci, 0, ~0UL);
 #else
-		assert(0); /* Can't reach this code. */
+		SSB_BUG_ON(1); /* Can't reach this code. */
 #endif
 		break;
 	}
diff --git a/target/linux/generic-2.6/files/drivers/ssb/ssb_private.h b/target/linux/generic-2.6/files/drivers/ssb/ssb_private.h
index d00d186..a789364 100644
--- a/target/linux/generic-2.6/files/drivers/ssb/ssb_private.h
+++ b/target/linux/generic-2.6/files/drivers/ssb/ssb_private.h
@@ -3,7 +3,6 @@
 
 #include <linux/ssb/ssb.h>
 #include <linux/types.h>
-#include <asm/io.h>
 
 
 #define PFX	"ssb: "
@@ -16,32 +15,20 @@
 
 /* dprintk: Debugging printk; vanishes for non-debug compilation */
 #ifdef CONFIG_SSB_DEBUG
-# define ssb_dprintk(fmt, x...)	ssb_printk(fmt ,##x)
+# define ssb_dprintk(fmt, x...)	ssb_printk(fmt , ##x)
 #else
 # define ssb_dprintk(fmt, x...)	do { /* nothing */ } while (0)
 #endif
 
-/* printkl: Rate limited printk */
-#define ssb_printkl(fmt, x...)	do {		\
-	if (printk_ratelimit())			\
-		ssb_printk(fmt ,##x);		\
-				} while (0)
-
-/* dprintkl: Rate limited debugging printk */
 #ifdef CONFIG_SSB_DEBUG
-# define ssb_dprintkl			ssb_printkl
+# define SSB_WARN_ON(x)		WARN_ON(x)
+# define SSB_BUG_ON(x)		BUG_ON(x)
 #else
-# define ssb_dprintkl(fmt, x...)	do { /* nothing */ } while (0)
+static inline int __ssb_do_nothing(int x) { return x; }
+# define SSB_WARN_ON(x)		__ssb_do_nothing(unlikely(!!(x)))
+# define SSB_BUG_ON(x)		__ssb_do_nothing(unlikely(!!(x)))
 #endif
 
-#define assert(cond)	do {						\
-	if (unlikely(!(cond))) {					\
-		ssb_dprintk(KERN_ERR PFX "BUG: Assertion failed (%s) "	\
-			    "at: %s:%d:%s()\n",				\
-			    #cond, __FILE__, __LINE__, __func__);	\
-	}								\
-		       } while (0)
-
 
 /* pci.c */
 #ifdef CONFIG_SSB_PCIHOST
@@ -120,7 +107,7 @@ static inline int ssb_pcmcia_init(struct ssb_bus *bus)
 
 
 /* scan.c */
-extern const char * ssb_core_name(u16 coreid);
+extern const char *ssb_core_name(u16 coreid);
 extern int ssb_bus_scan(struct ssb_bus *bus,
 			unsigned long baseaddr);
 extern void ssb_iounmap(struct ssb_bus *ssb);
@@ -128,10 +115,22 @@ extern void ssb_iounmap(struct ssb_bus *ssb);
 
 /* core.c */
 extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m);
-#ifdef CONFIG_SSB_PCIHOST
 extern int ssb_devices_freeze(struct ssb_bus *bus);
 extern int ssb_devices_thaw(struct ssb_bus *bus);
-extern struct ssb_bus * ssb_pci_dev_to_bus(struct pci_dev *pdev);
+extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
+
+/* b43_pci_bridge.c */
+#ifdef CONFIG_SSB_PCIHOST
+extern int __init b43_pci_ssb_bridge_init(void);
+extern void __exit b43_pci_ssb_bridge_exit(void);
+#else /* CONFIG_SSB_PCIHOST */
+static inline int b43_pci_ssb_bridge_init(void)
+{
+	return 0;
+}
+static inline void b43_pci_ssb_bridge_exit(void)
+{
+}
 #endif /* CONFIG_SSB_PCIHOST */
 
 #endif /* LINUX_SSB_PRIVATE_H_ */