remove 2.6.24, no target is relying on it

SVN-Revision: 15388

1 files changed, 0 insertions, 728 deletions

diff --git a/target/linux/generic-2.6/patches-2.6.24/601-br2684-routed-support.patch b/target/linux/generic-2.6/patches-2.6.24/601-br2684-routed-support.patch
deleted file mode 100644
index 3bc2e26..0000000
--- a/target/linux/generic-2.6/patches-2.6.24/601-br2684-routed-support.patch
+++ /dev/null
@@ -1,728 +0,0 @@
---- a/include/linux/atmbr2684.h
-+++ b/include/linux/atmbr2684.h
-@@ -14,6 +14,9 @@
- #define BR2684_MEDIA_FDDI	(3)
- #define BR2684_MEDIA_802_6	(4)	/* 802.6 */
- 
-+					/* used only at device creation:  */
-+#define BR2684_FLAG_ROUTED	(1<<16)	/* payload is routed, not bridged */
-+
- /*
-  * Is there FCS inbound on this VC?  This currently isn't supported.
-  */
-@@ -36,15 +39,22 @@
- #define BR2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
- 
- /*
-+ * Is this VC bridged or routed?
-+ */
-+
-+#define BR2684_PAYLOAD_ROUTED   (0)
-+#define BR2684_PAYLOAD_BRIDGED  (1)
-+
-+/*
-  * This is for the ATM_NEWBACKENDIF call - these are like socket families:
-  * the first element of the structure is the backend number and the rest
-  * is per-backend specific
-  */
- struct atm_newif_br2684 {
--	atm_backend_t	backend_num;	/* ATM_BACKEND_BR2684 */
--	int		media;		/* BR2684_MEDIA_* */
--	char		ifname[IFNAMSIZ];
--	int		mtu;
-+	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
-+	int media;		/* BR2684_MEDIA_*, flags in upper bits */
-+	char ifname[IFNAMSIZ];
-+	int mtu;
- };
- 
- /*
-@@ -55,10 +65,10 @@ struct atm_newif_br2684 {
- #define BR2684_FIND_BYNUM	(1)
- #define BR2684_FIND_BYIFNAME	(2)
- struct br2684_if_spec {
--	int method;			/* BR2684_FIND_* */
-+	int method;		/* BR2684_FIND_* */
- 	union {
--		char		ifname[IFNAMSIZ];
--		int		devnum;
-+		char ifname[IFNAMSIZ];
-+		int devnum;
- 	} spec;
- };
- 
-@@ -68,16 +78,16 @@ struct br2684_if_spec {
-  * is per-backend specific
-  */
- struct atm_backend_br2684 {
--	atm_backend_t	backend_num;	/* ATM_BACKEND_BR2684 */
-+	atm_backend_t backend_num;	/* ATM_BACKEND_BR2684 */
- 	struct br2684_if_spec ifspec;
--	int	fcs_in;		/* BR2684_FCSIN_* */
--	int	fcs_out;	/* BR2684_FCSOUT_* */
--	int	fcs_auto;	/* 1: fcs_{in,out} disabled if no FCS rx'ed */
--	int	encaps;		/* BR2684_ENCAPS_* */
--	int	has_vpiid;	/* 1: use vpn_id - Unsupported */
--	__u8	vpn_id[7];
--	int	send_padding;	/* unsupported */
--	int	min_size;	/* we will pad smaller packets than this */
-+	int fcs_in;		/* BR2684_FCSIN_* */
-+	int fcs_out;		/* BR2684_FCSOUT_* */
-+	int fcs_auto;		/* 1: fcs_{in,out} disabled if no FCS rx'ed */
-+	int encaps;		/* BR2684_ENCAPS_* */
-+	int has_vpiid;		/* 1: use vpn_id - Unsupported */
-+	__u8 vpn_id[7];
-+	int send_padding;	/* unsupported */
-+	int min_size;		/* we will pad smaller packets than this */
- };
- 
- /*
-@@ -86,8 +96,8 @@ struct atm_backend_br2684 {
-  * efficient per-if in/out filters, this support will be removed
-  */
- struct br2684_filter {
--	__be32	prefix;		/* network byte order */
--	__be32	netmask;	/* 0 = disable filter */
-+	__be32 prefix;		/* network byte order */
-+	__be32 netmask;		/* 0 = disable filter */
- };
- 
- struct br2684_filter_set {
-@@ -95,7 +105,13 @@ struct br2684_filter_set {
- 	struct br2684_filter filter;
- };
- 
-+enum br2684_payload {
-+	p_routed = BR2684_PAYLOAD_ROUTED,
-+	p_bridged = BR2684_PAYLOAD_BRIDGED,
-+};
-+
- #define BR2684_SETFILT	_IOW( 'a', ATMIOC_BACKEND + 0, \
- 				struct br2684_filter_set)
- 
- #endif /* _LINUX_ATMBR2684_H */
-+
---- a/net/atm/br2684.c
-+++ b/net/atm/br2684.c
-@@ -1,8 +1,10 @@
- /*
--Experimental ethernet netdevice using ATM AAL5 as underlying carrier
--(RFC1483 obsoleted by RFC2684) for Linux 2.4
--Author: Marcell GAL, 2000, XDSL Ltd, Hungary
--*/
-+ * Ethernet netdevice using ATM AAL5 as underlying carrier
-+ * (RFC1483 obsoleted by RFC2684) for Linux
-+ *
-+ * Authors: Marcell GAL, 2000, XDSL Ltd, Hungary
-+ *          Eric Kinzie, 2006-2007, US Naval Research Laboratory
-+ */
- 
- #include <linux/module.h>
- #include <linux/init.h>
-@@ -39,21 +41,35 @@ static void skb_debug(const struct sk_bu
- #define skb_debug(skb)	do {} while (0)
- #endif
- 
-+#define BR2684_ETHERTYPE_LEN	2
-+#define BR2684_PAD_LEN		2
-+
-+#define LLC		0xaa, 0xaa, 0x03
-+#define SNAP_BRIDGED	0x00, 0x80, 0xc2
-+#define SNAP_ROUTED	0x00, 0x00, 0x00
-+#define PID_ETHERNET	0x00, 0x07
-+#define ETHERTYPE_IPV4	0x08, 0x00
-+#define ETHERTYPE_IPV6	0x86, 0xdd
-+#define PAD_BRIDGED	0x00, 0x00
-+
-+static unsigned char ethertype_ipv4[] = { ETHERTYPE_IPV4 };
-+static unsigned char ethertype_ipv6[] = { ETHERTYPE_IPV6 };
- static unsigned char llc_oui_pid_pad[] =
--    { 0xAA, 0xAA, 0x03, 0x00, 0x80, 0xC2, 0x00, 0x07, 0x00, 0x00 };
--#define PADLEN	(2)
-+			{ LLC, SNAP_BRIDGED, PID_ETHERNET, PAD_BRIDGED };
-+static unsigned char llc_oui_ipv4[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV4 };
-+static unsigned char llc_oui_ipv6[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV6 };
- 
- enum br2684_encaps {
--	e_vc  = BR2684_ENCAPS_VC,
-+	e_vc = BR2684_ENCAPS_VC,
- 	e_llc = BR2684_ENCAPS_LLC,
- };
- 
- struct br2684_vcc {
--	struct atm_vcc  *atmvcc;
-+	struct atm_vcc *atmvcc;
- 	struct net_device *device;
--	/* keep old push,pop functions for chaining */
--	void (*old_push)(struct atm_vcc *vcc,struct sk_buff *skb);
--	/* void (*old_pop)(struct atm_vcc *vcc,struct sk_buff *skb); */
-+	/* keep old push, pop functions for chaining */
-+	void (*old_push) (struct atm_vcc * vcc, struct sk_buff * skb);
-+	/* void (*old_pop)(struct atm_vcc *vcc, struct sk_buff *skb); */
- 	enum br2684_encaps encaps;
- 	struct list_head brvccs;
- #ifdef CONFIG_ATM_BR2684_IPFILTER
-@@ -66,9 +82,10 @@ struct br2684_dev {
- 	struct net_device *net_dev;
- 	struct list_head br2684_devs;
- 	int number;
--	struct list_head brvccs; /* one device <=> one vcc (before xmas) */
-+	struct list_head brvccs;	/* one device <=> one vcc (before xmas) */
- 	struct net_device_stats stats;
- 	int mac_was_set;
-+	enum br2684_payload payload;
- };
- 
- /*
-@@ -84,7 +101,7 @@ static LIST_HEAD(br2684_devs);
- 
- static inline struct br2684_dev *BRPRIV(const struct net_device *net_dev)
- {
--	return (struct br2684_dev *) net_dev->priv;
-+	return (struct br2684_dev *)net_dev->priv;
- }
- 
- static inline struct net_device *list_entry_brdev(const struct list_head *le)
-@@ -94,7 +111,7 @@ static inline struct net_device *list_en
- 
- static inline struct br2684_vcc *BR2684_VCC(const struct atm_vcc *atmvcc)
- {
--	return (struct br2684_vcc *) (atmvcc->user_back);
-+	return (struct br2684_vcc *)(atmvcc->user_back);
- }
- 
- static inline struct br2684_vcc *list_entry_brvcc(const struct list_head *le)
-@@ -132,10 +149,11 @@ static struct net_device *br2684_find_de
-  * otherwise false
-  */
- static int br2684_xmit_vcc(struct sk_buff *skb, struct br2684_dev *brdev,
--	struct br2684_vcc *brvcc)
-+			   struct br2684_vcc *brvcc)
- {
- 	struct atm_vcc *atmvcc;
- 	int minheadroom = (brvcc->encaps == e_llc) ? 10 : 2;
-+
- 	if (skb_headroom(skb) < minheadroom) {
- 		struct sk_buff *skb2 = skb_realloc_headroom(skb, minheadroom);
- 		brvcc->copies_needed++;
-@@ -146,23 +164,48 @@ static int br2684_xmit_vcc(struct sk_buf
- 		}
- 		skb = skb2;
- 	}
--	skb_push(skb, minheadroom);
--	if (brvcc->encaps == e_llc)
--		skb_copy_to_linear_data(skb, llc_oui_pid_pad, 10);
--	else
--		memset(skb->data, 0, 2);
-+
-+	if (brvcc->encaps == e_llc) {
-+		if (brdev->payload == p_bridged) {
-+			skb_push(skb, sizeof(llc_oui_pid_pad));
-+			skb_copy_to_linear_data(skb, llc_oui_pid_pad,
-+						sizeof(llc_oui_pid_pad));
-+		} else if (brdev->payload == p_routed) {
-+			unsigned short prot = ntohs(skb->protocol);
-+
-+			skb_push(skb, sizeof(llc_oui_ipv4));
-+			switch (prot) {
-+			case ETH_P_IP:
-+				skb_copy_to_linear_data(skb, llc_oui_ipv4,
-+							sizeof(llc_oui_ipv4));
-+				break;
-+			case ETH_P_IPV6:
-+				skb_copy_to_linear_data(skb, llc_oui_ipv6,
-+							sizeof(llc_oui_ipv6));
-+				break;
-+			default:
-+				dev_kfree_skb(skb);
-+				return 0;
-+			}
-+		}
-+	} else {
-+		skb_push(skb, 2);
-+		if (brdev->payload == p_bridged)
-+			memset(skb->data, 0, 2);
-+	}
- 	skb_debug(skb);
- 
- 	ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc;
- 	pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev);
- 	if (!atm_may_send(atmvcc, skb->truesize)) {
--		/* we free this here for now, because we cannot know in a higher
--			layer whether the skb point it supplied wasn't freed yet.
--			now, it always is.
--		*/
-+		/*
-+		 * We free this here for now, because we cannot know in a higher
-+		 * layer whether the skb pointer it supplied wasn't freed yet.
-+		 * Now, it always is.
-+		 */
- 		dev_kfree_skb(skb);
- 		return 0;
--		}
-+	}
- 	atomic_add(skb->truesize, &sk_atm(atmvcc)->sk_wmem_alloc);
- 	ATM_SKB(skb)->atm_options = atmvcc->atm_options;
- 	brdev->stats.tx_packets++;
-@@ -172,10 +215,9 @@ static int br2684_xmit_vcc(struct sk_buf
- }
- 
- static inline struct br2684_vcc *pick_outgoing_vcc(struct sk_buff *skb,
--	struct br2684_dev *brdev)
-+						   struct br2684_dev *brdev)
- {
--	return list_empty(&brdev->brvccs) ? NULL :
--	    list_entry_brvcc(brdev->brvccs.next); /* 1 vcc/dev right now */
-+	return list_empty(&brdev->brvccs) ? NULL : list_entry_brvcc(brdev->brvccs.next);	/* 1 vcc/dev right now */
- }
- 
- static int br2684_start_xmit(struct sk_buff *skb, struct net_device *dev)
-@@ -199,11 +241,10 @@ static int br2684_start_xmit(struct sk_b
- 		/*
- 		 * We should probably use netif_*_queue() here, but that
- 		 * involves added complication.  We need to walk before
--		 * we can run
-+		 * we can run.
-+		 *
-+		 * Don't free here! this pointer might be no longer valid!
- 		 */
--		/* don't free here! this pointer might be no longer valid!
--		dev_kfree_skb(skb);
--		*/
- 		brdev->stats.tx_errors++;
- 		brdev->stats.tx_fifo_errors++;
- 	}
-@@ -217,12 +258,11 @@ static struct net_device_stats *br2684_g
- 	return &BRPRIV(dev)->stats;
- }
- 
--
- /*
-  * We remember when the MAC gets set, so we don't override it later with
-  * the ESI of the ATM card of the first VC
-  */
--static int (*my_eth_mac_addr)(struct net_device *, void *);
-+static int (*my_eth_mac_addr) (struct net_device *, void *);
- static int br2684_mac_addr(struct net_device *dev, void *p)
- {
- 	int err = my_eth_mac_addr(dev, p);
-@@ -233,7 +273,7 @@ static int br2684_mac_addr(struct net_de
- 
- #ifdef CONFIG_ATM_BR2684_IPFILTER
- /* this IOCTL is experimental. */
--static int br2684_setfilt(struct atm_vcc *atmvcc, void __user *arg)
-+static int br2684_setfilt(struct atm_vcc *atmvcc, void __user * arg)
- {
- 	struct br2684_vcc *brvcc;
- 	struct br2684_filter_set fs;
-@@ -243,13 +283,12 @@ static int br2684_setfilt(struct atm_vcc
- 	if (fs.ifspec.method != BR2684_FIND_BYNOTHING) {
- 		/*
- 		 * This is really a per-vcc thing, but we can also search
--		 * by device
-+		 * by device.
- 		 */
- 		struct br2684_dev *brdev;
- 		read_lock(&devs_lock);
- 		brdev = BRPRIV(br2684_find_dev(&fs.ifspec));
--		if (brdev == NULL || list_empty(&brdev->brvccs) ||
--		    brdev->brvccs.next != brdev->brvccs.prev)  /* >1 VCC */
-+		if (brdev == NULL || list_empty(&brdev->brvccs) || brdev->brvccs.next != brdev->brvccs.prev)	/* >1 VCC */
- 			brvcc = NULL;
- 		else
- 			brvcc = list_entry_brvcc(brdev->brvccs.next);
-@@ -267,15 +306,16 @@ static inline int
- packet_fails_filter(__be16 type, struct br2684_vcc *brvcc, struct sk_buff *skb)
- {
- 	if (brvcc->filter.netmask == 0)
--		return 0;			/* no filter in place */
-+		return 0;	/* no filter in place */
- 	if (type == htons(ETH_P_IP) &&
--	    (((struct iphdr *) (skb->data))->daddr & brvcc->filter.
-+	    (((struct iphdr *)(skb->data))->daddr & brvcc->filter.
- 	     netmask) == brvcc->filter.prefix)
- 		return 0;
- 	if (type == htons(ETH_P_ARP))
- 		return 0;
--	/* TODO: we should probably filter ARPs too.. don't want to have
--	 *   them returning values that don't make sense, or is that ok?
-+	/*
-+	 * TODO: we should probably filter ARPs too.. don't want to have
-+	 * them returning values that don't make sense, or is that ok?
- 	 */
- 	return 1;		/* drop */
- }
-@@ -299,7 +339,6 @@ static void br2684_push(struct atm_vcc *
- 	struct br2684_vcc *brvcc = BR2684_VCC(atmvcc);
- 	struct net_device *net_dev = brvcc->device;
- 	struct br2684_dev *brdev = BRPRIV(net_dev);
--	int plen = sizeof(llc_oui_pid_pad) + ETH_HLEN;
- 
- 	pr_debug("br2684_push\n");
- 
-@@ -320,35 +359,58 @@ static void br2684_push(struct atm_vcc *
- 	atm_return(atmvcc, skb->truesize);
- 	pr_debug("skb from brdev %p\n", brdev);
- 	if (brvcc->encaps == e_llc) {
--		/* let us waste some time for checking the encapsulation.
--		   Note, that only 7 char is checked so frames with a valid FCS
--		   are also accepted (but FCS is not checked of course) */
--		if (memcmp(skb->data, llc_oui_pid_pad, 7)) {
-+
-+		if (skb->len > 7 && skb->data[7] == 0x01)
-+			__skb_trim(skb, skb->len - 4);
-+
-+		/* accept packets that have "ipv[46]" in the snap header */
-+		if ((skb->len >= (sizeof(llc_oui_ipv4)))
-+		    &&
-+		    (memcmp
-+		     (skb->data, llc_oui_ipv4,
-+		      sizeof(llc_oui_ipv4) - BR2684_ETHERTYPE_LEN) == 0)) {
-+			if (memcmp
-+			    (skb->data + 6, ethertype_ipv6,
-+			     sizeof(ethertype_ipv6)) == 0)
-+				skb->protocol = __constant_htons(ETH_P_IPV6);
-+			else if (memcmp
-+				 (skb->data + 6, ethertype_ipv4,
-+				  sizeof(ethertype_ipv4)) == 0)
-+				skb->protocol = __constant_htons(ETH_P_IP);
-+			else {
-+				brdev->stats.rx_errors++;
-+				dev_kfree_skb(skb);
-+				return;
-+			}
-+			skb_pull(skb, sizeof(llc_oui_ipv4));
-+			skb_reset_network_header(skb);
-+			skb->pkt_type = PACKET_HOST;
-+			/*
-+			 * Let us waste some time for checking the encapsulation.
-+			 * Note, that only 7 char is checked so frames with a valid FCS
-+			 * are also accepted (but FCS is not checked of course).
-+			 */
-+		} else if ((skb->len >= sizeof(llc_oui_pid_pad)) &&
-+			   (memcmp(skb->data, llc_oui_pid_pad, 7) == 0)) {
-+			skb_pull(skb, sizeof(llc_oui_pid_pad));
-+			skb->protocol = eth_type_trans(skb, net_dev);
-+		} else {
- 			brdev->stats.rx_errors++;
- 			dev_kfree_skb(skb);
- 			return;
- 		}
- 
--		/* Strip FCS if present */
--		if (skb->len > 7 && skb->data[7] == 0x01)
--			__skb_trim(skb, skb->len - 4);
- 	} else {
--		plen = PADLEN + ETH_HLEN;	/* pad, dstmac,srcmac, ethtype */
- 		/* first 2 chars should be 0 */
- 		if (*((u16 *) (skb->data)) != 0) {
- 			brdev->stats.rx_errors++;
- 			dev_kfree_skb(skb);
- 			return;
- 		}
--	}
--	if (skb->len < plen) {
--		brdev->stats.rx_errors++;
--		dev_kfree_skb(skb);	/* dev_ not needed? */
--		return;
-+		skb_pull(skb, BR2684_PAD_LEN + ETH_HLEN);	/* pad, dstmac, srcmac, ethtype */
-+		skb->protocol = eth_type_trans(skb, net_dev);
- 	}
- 
--	skb_pull(skb, plen - ETH_HLEN);
--	skb->protocol = eth_type_trans(skb, net_dev);
- #ifdef CONFIG_ATM_BR2684_IPFILTER
- 	if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb))) {
- 		brdev->stats.rx_dropped++;
-@@ -372,11 +434,12 @@ static void br2684_push(struct atm_vcc *
- 	netif_rx(skb);
- }
- 
--static int br2684_regvcc(struct atm_vcc *atmvcc, void __user *arg)
-+/*
-+ * Assign a vcc to a dev
-+ * Note: we do not have explicit unassign, but look at _push()
-+ */
-+static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg)
- {
--/* assign a vcc to a dev
--Note: we do not have explicit unassign, but look at _push()
--*/
- 	int err;
- 	struct br2684_vcc *brvcc;
- 	struct sk_buff *skb;
-@@ -395,7 +458,7 @@ Note: we do not have explicit unassign, 
- 	net_dev = br2684_find_dev(&be.ifspec);
- 	if (net_dev == NULL) {
- 		printk(KERN_ERR
--		    "br2684: tried to attach to non-existant device\n");
-+		       "br2684: tried to attach to non-existant device\n");
- 		err = -ENXIO;
- 		goto error;
- 	}
-@@ -411,13 +474,15 @@ Note: we do not have explicit unassign, 
- 	}
- 	if (be.fcs_in != BR2684_FCSIN_NO || be.fcs_out != BR2684_FCSOUT_NO ||
- 	    be.fcs_auto || be.has_vpiid || be.send_padding || (be.encaps !=
--	    BR2684_ENCAPS_VC && be.encaps != BR2684_ENCAPS_LLC) ||
--	    be.min_size != 0) {
-+							       BR2684_ENCAPS_VC
-+							       && be.encaps !=
-+							       BR2684_ENCAPS_LLC)
-+	    || be.min_size != 0) {
- 		err = -EINVAL;
- 		goto error;
- 	}
--	pr_debug("br2684_regvcc vcc=%p, encaps=%d, brvcc=%p\n", atmvcc, be.encaps,
--		brvcc);
-+	pr_debug("br2684_regvcc vcc=%p, encaps=%d, brvcc=%p\n", atmvcc,
-+		 be.encaps, brvcc);
- 	if (list_empty(&brdev->brvccs) && !brdev->mac_was_set) {
- 		unsigned char *esi = atmvcc->dev->esi;
- 		if (esi[0] | esi[1] | esi[2] | esi[3] | esi[4] | esi[5])
-@@ -430,7 +495,7 @@ Note: we do not have explicit unassign, 
- 	brvcc->device = net_dev;
- 	brvcc->atmvcc = atmvcc;
- 	atmvcc->user_back = brvcc;
--	brvcc->encaps = (enum br2684_encaps) be.encaps;
-+	brvcc->encaps = (enum br2684_encaps)be.encaps;
- 	brvcc->old_push = atmvcc->push;
- 	barrier();
- 	atmvcc->push = br2684_push;
-@@ -461,7 +526,7 @@ Note: we do not have explicit unassign, 
- 	}
- 	__module_get(THIS_MODULE);
- 	return 0;
--    error:
-+      error:
- 	write_unlock_irq(&devs_lock);
- 	kfree(brvcc);
- 	return err;
-@@ -482,25 +547,52 @@ static void br2684_setup(struct net_devi
- 	INIT_LIST_HEAD(&brdev->brvccs);
- }
- 
--static int br2684_create(void __user *arg)
-+static void br2684_setup_routed(struct net_device *netdev)
-+{
-+	struct br2684_dev *brdev = BRPRIV(netdev);
-+	brdev->net_dev = netdev;
-+
-+	netdev->hard_header_len = 0;
-+	my_eth_mac_addr = netdev->set_mac_address;
-+	netdev->set_mac_address = br2684_mac_addr;
-+	netdev->hard_start_xmit = br2684_start_xmit;
-+	netdev->get_stats = br2684_get_stats;
-+	netdev->addr_len = 0;
-+	netdev->mtu = 1500;
-+	netdev->type = ARPHRD_PPP;
-+	netdev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
-+	netdev->tx_queue_len = 100;
-+	INIT_LIST_HEAD(&brdev->brvccs);
-+}
-+
-+static int br2684_create(void __user * arg)
- {
- 	int err;
- 	struct net_device *netdev;
- 	struct br2684_dev *brdev;
- 	struct atm_newif_br2684 ni;
-+	enum br2684_payload payload;
- 
- 	pr_debug("br2684_create\n");
- 
- 	if (copy_from_user(&ni, arg, sizeof ni)) {
- 		return -EFAULT;
- 	}
-+
-+	if (ni.media & BR2684_FLAG_ROUTED)
-+		payload = p_routed;
-+	else
-+		payload = p_bridged;
-+	ni.media &= 0xffff;	/* strip flags */
-+
- 	if (ni.media != BR2684_MEDIA_ETHERNET || ni.mtu != 1500) {
- 		return -EINVAL;
- 	}
- 
- 	netdev = alloc_netdev(sizeof(struct br2684_dev),
- 			      ni.ifname[0] ? ni.ifname : "nas%d",
--			      br2684_setup);
-+			      (payload == p_routed) ?
-+			      br2684_setup_routed : br2684_setup);
- 	if (!netdev)
- 		return -ENOMEM;
- 
-@@ -516,6 +608,7 @@ static int br2684_create(void __user *ar
- 	}
- 
- 	write_lock_irq(&devs_lock);
-+	brdev->payload = payload;
- 	brdev->number = list_empty(&br2684_devs) ? 1 :
- 	    BRPRIV(list_entry_brdev(br2684_devs.prev))->number + 1;
- 	list_add_tail(&brdev->br2684_devs, &br2684_devs);
-@@ -528,16 +621,16 @@ static int br2684_create(void __user *ar
-  * -ENOIOCTLCMD for any unrecognized ioctl
-  */
- static int br2684_ioctl(struct socket *sock, unsigned int cmd,
--	unsigned long arg)
-+			unsigned long arg)
- {
- 	struct atm_vcc *atmvcc = ATM_SD(sock);
- 	void __user *argp = (void __user *)arg;
-+	atm_backend_t b;
- 
- 	int err;
--	switch(cmd) {
-+	switch (cmd) {
- 	case ATM_SETBACKEND:
--	case ATM_NEWBACKENDIF: {
--		atm_backend_t b;
-+	case ATM_NEWBACKENDIF:
- 		err = get_user(b, (atm_backend_t __user *) argp);
- 		if (err)
- 			return -EFAULT;
-@@ -549,7 +642,6 @@ static int br2684_ioctl(struct socket *s
- 			return br2684_regvcc(atmvcc, argp);
- 		else
- 			return br2684_create(argp);
--		}
- #ifdef CONFIG_ATM_BR2684_IPFILTER
- 	case BR2684_SETFILT:
- 		if (atmvcc->push != br2684_push)
-@@ -557,6 +649,7 @@ static int br2684_ioctl(struct socket *s
- 		if (!capable(CAP_NET_ADMIN))
- 			return -EPERM;
- 		err = br2684_setfilt(atmvcc, argp);
-+
- 		return err;
- #endif /* CONFIG_ATM_BR2684_IPFILTER */
- 	}
-@@ -564,24 +657,25 @@ static int br2684_ioctl(struct socket *s
- }
- 
- static struct atm_ioctl br2684_ioctl_ops = {
--	.owner	= THIS_MODULE,
--	.ioctl	= br2684_ioctl,
-+	.owner = THIS_MODULE,
-+	.ioctl = br2684_ioctl,
- };
- 
--
- #ifdef CONFIG_PROC_FS
--static void *br2684_seq_start(struct seq_file *seq, loff_t *pos)
-+static void *br2684_seq_start(struct seq_file *seq, loff_t * pos)
-+	__acquires(devs_lock)
- {
- 	read_lock(&devs_lock);
- 	return seq_list_start(&br2684_devs, *pos);
- }
- 
--static void *br2684_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-+static void *br2684_seq_next(struct seq_file *seq, void *v, loff_t * pos)
- {
- 	return seq_list_next(v, &br2684_devs, pos);
- }
- 
- static void br2684_seq_stop(struct seq_file *seq, void *v)
-+	__releases(devs_lock)
- {
- 	read_unlock(&devs_lock);
- }
-@@ -589,7 +683,7 @@ static void br2684_seq_stop(struct seq_f
- static int br2684_seq_show(struct seq_file *seq, void *v)
- {
- 	const struct br2684_dev *brdev = list_entry(v, struct br2684_dev,
--			br2684_devs);
-+						    br2684_devs);
- 	const struct net_device *net_dev = brdev->net_dev;
- 	const struct br2684_vcc *brvcc;
- 	DECLARE_MAC_BUF(mac);
-@@ -601,21 +695,19 @@ static int br2684_seq_show(struct seq_fi
- 		   brdev->mac_was_set ? "set" : "auto");
- 
- 	list_for_each_entry(brvcc, &brdev->brvccs, brvccs) {
--		seq_printf(seq, "  vcc %d.%d.%d: encaps=%s"
--				    ", failed copies %u/%u"
--				    "\n", brvcc->atmvcc->dev->number,
--				    brvcc->atmvcc->vpi, brvcc->atmvcc->vci,
--				    (brvcc->encaps == e_llc) ? "LLC" : "VC"
--				    , brvcc->copies_failed
--				    , brvcc->copies_needed
--				    );
-+		seq_printf(seq, "  vcc %d.%d.%d: encaps=%s payload=%s"
-+			   ", failed copies %u/%u"
-+			   "\n", brvcc->atmvcc->dev->number,
-+			   brvcc->atmvcc->vpi, brvcc->atmvcc->vci,
-+			   (brvcc->encaps == e_llc) ? "LLC" : "VC",
-+			   (brdev->payload == p_bridged) ? "bridged" : "routed",
-+			   brvcc->copies_failed, brvcc->copies_needed);
- #ifdef CONFIG_ATM_BR2684_IPFILTER
- #define b1(var, byte)	((u8 *) &brvcc->filter.var)[byte]
- #define bs(var)		b1(var, 0), b1(var, 1), b1(var, 2), b1(var, 3)
--			if (brvcc->filter.netmask != 0)
--				seq_printf(seq, "    filter=%d.%d.%d.%d/"
--						"%d.%d.%d.%d\n",
--						bs(prefix), bs(netmask));
-+		if (brvcc->filter.netmask != 0)
-+			seq_printf(seq, "    filter=%d.%d.%d.%d/"
-+				   "%d.%d.%d.%d\n", bs(prefix), bs(netmask));
- #undef bs
- #undef b1
- #endif /* CONFIG_ATM_BR2684_IPFILTER */
-@@ -625,9 +717,9 @@ static int br2684_seq_show(struct seq_fi
- 
- static const struct seq_operations br2684_seq_ops = {
- 	.start = br2684_seq_start,
--	.next  = br2684_seq_next,
--	.stop  = br2684_seq_stop,
--	.show  = br2684_seq_show,
-+	.next = br2684_seq_next,
-+	.stop = br2684_seq_stop,
-+	.show = br2684_seq_show,
- };
- 
- static int br2684_proc_open(struct inode *inode, struct file *file)
-@@ -636,26 +728,28 @@ static int br2684_proc_open(struct inode
- }
- 
- static const struct file_operations br2684_proc_ops = {
--	.owner   = THIS_MODULE,
--	.open    = br2684_proc_open,
--	.read    = seq_read,
--	.llseek  = seq_lseek,
-+	.owner = THIS_MODULE,
-+	.open = br2684_proc_open,
-+	.read = seq_read,
-+	.llseek = seq_lseek,
- 	.release = seq_release,
- };
- 
- extern struct proc_dir_entry *atm_proc_root;	/* from proc.c */
--#endif
-+#endif /* CONFIG_PROC_FS */
- 
- static int __init br2684_init(void)
- {
- #ifdef CONFIG_PROC_FS
- 	struct proc_dir_entry *p;
-+
- 	if ((p = create_proc_entry("br2684", 0, atm_proc_root)) == NULL)
--		return -ENOMEM;
--	p->proc_fops = &br2684_proc_ops;
-+        return -ENOMEM;
-+        p->proc_fops = &br2684_proc_ops;
- #endif
--	register_atm_ioctl(&br2684_ioctl_ops);
--	return 0;
-+        register_atm_ioctl(&br2684_ioctl_ops);
-+        return 0;
-+                                        
- }
- 
- static void __exit br2684_exit(void)
-@@ -689,3 +783,4 @@ module_exit(br2684_exit);
- MODULE_AUTHOR("Marcell GAL");
- MODULE_DESCRIPTION("RFC2684 bridged protocols over ATM/AAL5");
- MODULE_LICENSE("GPL");
-+