rename target/linux/generic-2.6 to generic

SVN-Revision: 21952

2 files changed, 215 insertions, 0 deletions

diff --git a/target/linux/generic/files/crypto/ocf/ocfnull/Makefile b/target/linux/generic/files/crypto/ocf/ocfnull/Makefile
new file mode 100644
index 0000000..044bcac
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ocfnull/Makefile
@@ -0,0 +1,12 @@
+# for SGlinux builds
+-include $(ROOTDIR)/modules/.config
+
+obj-$(CONFIG_OCF_OCFNULL) += ocfnull.o
+
+obj ?= .
+EXTRA_CFLAGS += -I$(obj)/..
+
+ifdef TOPDIR
+-include $(TOPDIR)/Rules.make
+endif
+
diff --git a/target/linux/generic/files/crypto/ocf/ocfnull/ocfnull.c b/target/linux/generic/files/crypto/ocf/ocfnull/ocfnull.c
new file mode 100644
index 0000000..a6b76cd
--- /dev/null
+++ b/target/linux/generic/files/crypto/ocf/ocfnull/ocfnull.c
@@ -0,0 +1,203 @@
+/*
+ * An OCF module for determining the cost of crypto versus the cost of
+ * IPSec processing outside of OCF.  This modules gives us the effect of
+ * zero cost encryption,  of course you will need to run it at both ends
+ * since it does no crypto at all.
+ *
+ * Written by David McCullough <david_mccullough@mcafee.com>
+ * Copyright (C) 2006-2010 David McCullough 
+ *
+ * LICENSE TERMS
+ *
+ * The free distribution and use of this software in both source and binary
+ * form is allowed (with or without changes) provided that:
+ *
+ *   1. distributions of this source code include the above copyright
+ *      notice, this list of conditions and the following disclaimer;
+ *
+ *   2. distributions in binary form include the above copyright
+ *      notice, this list of conditions and the following disclaimer
+ *      in the documentation and/or other associated materials;
+ *
+ *   3. the copyright holder's name is not used to endorse products
+ *      built using this software without specific written permission.
+ *
+ * ALTERNATIVELY, provided that this notice is retained in full, this product
+ * may be distributed under the terms of the GNU General Public License (GPL),
+ * in which case the provisions of the GPL apply INSTEAD OF those given above.
+ *
+ * DISCLAIMER
+ *
+ * This software is provided 'as is' with no explicit or implied warranties
+ * in respect of its properties, including, but not limited to, correctness
+ * and/or fitness for purpose.
+ */
+
+#ifndef AUTOCONF_INCLUDED
+#include <linux/config.h>
+#endif
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/crypto.h>
+#include <linux/interrupt.h>
+
+#include <cryptodev.h>
+#include <uio.h>
+
+static int32_t			 null_id = -1;
+static u_int32_t		 null_sesnum = 0;
+
+static int null_process(device_t, struct cryptop *, int);
+static int null_newsession(device_t, u_int32_t *, struct cryptoini *);
+static int null_freesession(device_t, u_int64_t);
+
+#define debug ocfnull_debug
+int ocfnull_debug = 0;
+module_param(ocfnull_debug, int, 0644);
+MODULE_PARM_DESC(ocfnull_debug, "Enable debug");
+
+/*
+ * dummy device structure
+ */
+
+static struct {
+	softc_device_decl	sc_dev;
+} nulldev;
+
+static device_method_t null_methods = {
+	/* crypto device methods */
+	DEVMETHOD(cryptodev_newsession,	null_newsession),
+	DEVMETHOD(cryptodev_freesession,null_freesession),
+	DEVMETHOD(cryptodev_process,	null_process),
+};
+
+/*
+ * Generate a new software session.
+ */
+static int
+null_newsession(device_t arg, u_int32_t *sid, struct cryptoini *cri)
+{
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid == NULL || cri == NULL) {
+		dprintk("%s,%d - EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	if (null_sesnum == 0)
+		null_sesnum++;
+	*sid = null_sesnum++;
+	return 0;
+}
+
+
+/*
+ * Free a session.
+ */
+static int
+null_freesession(device_t arg, u_int64_t tid)
+{
+	u_int32_t sid = CRYPTO_SESID2LID(tid);
+
+	dprintk("%s()\n", __FUNCTION__);
+	if (sid > null_sesnum) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	/* Silently accept and return */
+	if (sid == 0)
+		return 0;
+	return 0;
+}
+
+
+/*
+ * Process a request.
+ */
+static int
+null_process(device_t arg, struct cryptop *crp, int hint)
+{
+	unsigned int lid;
+
+	dprintk("%s()\n", __FUNCTION__);
+
+	/* Sanity check */
+	if (crp == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		return EINVAL;
+	}
+
+	crp->crp_etype = 0;
+
+	if (crp->crp_desc == NULL || crp->crp_buf == NULL) {
+		dprintk("%s,%d: EINVAL\n", __FILE__, __LINE__);
+		crp->crp_etype = EINVAL;
+		goto done;
+	}
+
+	/*
+	 * find the session we are using
+	 */
+
+	lid = crp->crp_sid & 0xffffffff;
+	if (lid >= null_sesnum || lid == 0) {
+		crp->crp_etype = ENOENT;
+		dprintk("%s,%d: ENOENT\n", __FILE__, __LINE__);
+		goto done;
+	}
+
+done:
+	crypto_done(crp);
+	return 0;
+}
+
+
+/*
+ * our driver startup and shutdown routines
+ */
+
+static int
+null_init(void)
+{
+	dprintk("%s(%p)\n", __FUNCTION__, null_init);
+
+	memset(&nulldev, 0, sizeof(nulldev));
+	softc_device_init(&nulldev, "ocfnull", 0, null_methods);
+
+	null_id = crypto_get_driverid(softc_get_device(&nulldev),
+				CRYPTOCAP_F_HARDWARE);
+	if (null_id < 0)
+		panic("ocfnull: crypto device cannot initialize!");
+
+#define	REGISTER(alg) \
+	crypto_register(null_id,alg,0,0)
+	REGISTER(CRYPTO_DES_CBC);
+	REGISTER(CRYPTO_3DES_CBC);
+	REGISTER(CRYPTO_RIJNDAEL128_CBC);
+	REGISTER(CRYPTO_MD5);
+	REGISTER(CRYPTO_SHA1);
+	REGISTER(CRYPTO_MD5_HMAC);
+	REGISTER(CRYPTO_SHA1_HMAC);
+#undef REGISTER
+
+	return 0;
+}
+
+static void
+null_exit(void)
+{
+	dprintk("%s()\n", __FUNCTION__);
+	crypto_unregister_all(null_id);
+	null_id = -1;
+}
+
+module_init(null_init);
+module_exit(null_exit);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("David McCullough <david_mccullough@mcafee.com>");
+MODULE_DESCRIPTION("ocfnull - claims a lot but does nothing");