kernel: remove openwrt micrel.c (replaced by upstream driver)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43762

1 files changed, 0 insertions, 83 deletions

diff --git a/target/linux/generic/files/drivers/net/phy/micrel.c b/target/linux/generic/files/drivers/net/phy/micrel.c
deleted file mode 100644
index 1499d4a..0000000
--- a/target/linux/generic/files/drivers/net/phy/micrel.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  Driver for Micrel/Kendin PHYs
- *
- *  Copyright (c) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/phy.h>
-
-#define KSZ_REG_INT_CTRL	0x1b
-
-#define KSZ_INT_LU_EN	(1 << 8)	/* enable Link Up interrupt */
-#define KSZ_INT_RF_EN	(1 << 9)	/* enable Remote Fault interrupt */
-#define KSZ_INT_LD_EN	(1 << 10)	/* enable Link Down interrupt */
-
-#define KSZ_INT_INIT	(KSZ_INT_LU_EN | KSZ_INT_LD_EN)
-
-static int ksz8041_ack_interrupt(struct phy_device *phydev)
-{
-	int err;
-
-	err = phy_read(phydev, KSZ_REG_INT_CTRL);
-
-	return (err < 0) ? err : 0;
-}
-
-static int ksz8041_config_intr(struct phy_device *phydev)
-{
-	int err;
-
-	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
-		err = phy_write(phydev, KSZ_REG_INT_CTRL,
-				KSZ_INT_INIT);
-	else
-		err = phy_write(phydev, KSZ_REG_INT_CTRL, 0);
-
-	return err;
-}
-
-static struct phy_driver ksz8041_phy_driver = {
-	.phy_id		= 0x00221512,
-	.name		= "Micrel KSZ8041",
-	.phy_id_mask	= 0x001fffff,
-	.features	= PHY_BASIC_FEATURES,
-	.flags		= PHY_HAS_INTERRUPT,
-	.config_aneg	= genphy_config_aneg,
-	.read_status	= genphy_read_status,
-	.ack_interrupt	= ksz8041_ack_interrupt,
-	.config_intr	= ksz8041_config_intr,
-	.driver	= {
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init micrel_phy_init(void)
-{
-	return phy_driver_register(&ksz8041_phy_driver);
-}
-
-static void __exit micrel_phy_exit(void)
-{
-	phy_driver_unregister(&ksz8041_phy_driver);
-}
-
-#ifdef MODULE
-module_init(micrel_phy_init);
-module_exit(micrel_phy_exit);
-#else
-subsys_initcall(micrel_phy_init);
-#endif
-
-MODULE_DESCRIPTION("Micrel/Kendin PHY driver");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
-MODULE_LICENSE("GPL v2");