kernel: generic: Add kernel 4.14 support

This adds initial support for kernel 4.14 based on the patches for
kernel 4.9.

In the configuration I deactivated some of the new possible security
features like:
CONFIG_REFCOUNT_FULL
CONFIG_SLAB_FREELIST_HARDENED
CONFIG_SOFTLOCKUP_DETECTOR
CONFIG_WARN_ALL_UNSEEDED_RANDOM

And these overlay FS options are also deactivated:
CONFIG_OVERLAY_FS_INDEX
CONFIG_OVERLAY_FS_REDIRECT_DIR

I activated this:
CONFIG_FORTIFY_SOURCE
CONFIG_POSIX_TIMERS
CONFIG_SLAB_MERGE_DEFAULT
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED

I am not sure if I did the porting correct for the following patches:
target/linux/generic/backport-4.14/020-backport_netfilter_rtcache.patch
target/linux/generic/hack-4.14/220-gc_sections.patch
target/linux/generic/hack-4.14/321-powerpc_crtsavres_prereq.patch
target/linux/generic/pending-4.14/305-mips_module_reloc.patch
target/linux/generic/pending-4.14/611-netfilter_match_bypass_default_table.patch
target/linux/generic/pending-4.14/680-NET-skip-GRO-for-foreign-MAC-addresses.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

1 files changed, 52 insertions, 0 deletions

diff --git a/target/linux/generic/hack-4.14/835-misc-owl_loader.patch b/target/linux/generic/hack-4.14/835-misc-owl_loader.patch
new file mode 100644
index 0000000..bf7f7d5
--- /dev/null
+++ b/target/linux/generic/hack-4.14/835-misc-owl_loader.patch
@@ -0,0 +1,52 @@
+From dd36f935973d91644449bd9749f6062a2bed821b Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@googlemail.com>
+Date: Fri, 7 Jul 2017 17:26:46 +0200
+Subject: misc: owl-loader for delayed Atheros ath9k fixup
+
+Some devices (like the Cisco Meraki Z1 Cloud Managed Teleworker Gateway)
+need to be able to initialize the PCIe wifi device. Normally, this is done
+during the early stages of booting linux, because the necessary init code
+is read from the memory mapped SPI and passed to pci_enable_ath9k_fixup.
+However,this isn't possible for devices which have the init code for the
+Atheros chip stored on NAND in an UBI volume. Hence, this module can be
+used to initialze the chip when the user-space is ready to extract the
+init code.
+
+Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
+---
+ drivers/misc/Kconfig  | 12 ++++++++++++
+ drivers/misc/Makefile |  1 +
+ 2 files changed, 13 insertions(+)
+
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -151,6 +151,18 @@ config SGI_IOC4
+ 	  If you have an SGI Altix with an IOC4-based card say Y.
+ 	  Otherwise say N.
+ 
++config OWL_LOADER
++	tristate "Owl loader for initializing Atheros PCI(e) Wifi chips"
++	depends on PCI
++	---help---
++	This kernel module helps to initialize certain Qualcomm
++	Atheros' PCI(e) Wifi chips, which have the init data
++	(which contains the PCI device ID for example) stored
++	together with the calibration data in the file system.
++
++	This is necessary for devices like the Cisco Meraki Z1, say M.
++	Otherwise say N.
++
+ config TIFM_CORE
+ 	tristate "TI Flash Media interface support"
+ 	depends on PCI
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib
+ obj-$(CONFIG_DUMMY_IRQ)		+= dummy-irq.o
+ obj-$(CONFIG_ICS932S401)	+= ics932s401.o
+ obj-$(CONFIG_LKDTM)		+= lkdtm.o
++obj-$(CONFIG_OWL_LOADER)	+= owl-loader.o
+ obj-$(CONFIG_TIFM_CORE)       	+= tifm_core.o
+ obj-$(CONFIG_TIFM_7XX1)       	+= tifm_7xx1.o
+ obj-$(CONFIG_PHANTOM)		+= phantom.o