kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing

SVN-Revision: 31278

1 files changed, 353 insertions, 124 deletions

diff --git a/target/linux/generic/patches-2.6.30/941-ssb_update.patch b/target/linux/generic/patches-2.6.30/941-ssb_update.patch
index b27270a..b91f11d 100644
--- a/target/linux/generic/patches-2.6.30/941-ssb_update.patch
+++ b/target/linux/generic/patches-2.6.30/941-ssb_update.patch
@@ -225,7 +225,17 @@
   * Copyright 2007, Broadcom Corporation
   *
   * Licensed under the GNU/GPL. See COPYING for details.
-@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct 
+@@ -12,6 +12,9 @@
+ #include <linux/ssb/ssb_regs.h>
+ #include <linux/ssb/ssb_driver_chipcommon.h>
+ #include <linux/delay.h>
++#ifdef CONFIG_BCM47XX
++#include <asm/mach-bcm47xx/nvram.h>
++#endif
+ 
+ #include "ssb_private.h"
+ 
+@@ -28,6 +31,21 @@ static void ssb_chipco_pll_write(struct
  	chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
  }
  
@@ -247,8 +257,39 @@
  struct pmu0_plltab_entry {
  	u16 freq;	/* Crystal frequency in kHz.*/
  	u8 xf;		/* Crystal frequency value for PMU control */
-@@ -317,6 +332,12 @@ static void ssb_pmu_pll_init(struct ssb_
+@@ -76,10 +94,6 @@ static void ssb_pmu0_pllinit_r0(struct s
+ 	u32 pmuctl, tmp, pllctl;
+ 	unsigned int i;
+ 
+-	if ((bus->chip_id == 0x5354) && !crystalfreq) {
+-		/* The 5354 crystal freq is 25MHz */
+-		crystalfreq = 25000;
+-	}
+ 	if (crystalfreq)
+ 		e = pmu0_plltab_find_entry(crystalfreq);
+ 	if (!e)
+@@ -305,7 +319,11 @@ static void ssb_pmu_pll_init(struct ssb_
+ 	u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
+ 
+ 	if (bus->bustype == SSB_BUSTYPE_SSB) {
+-		/* TODO: The user may override the crystal frequency. */
++#ifdef CONFIG_BCM47XX
++		char buf[20];
++		if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
++			crystalfreq = simple_strtoul(buf, NULL, 0);
++#endif
+ 	}
+ 
+ 	switch (bus->chip_id) {
+@@ -314,9 +332,19 @@ static void ssb_pmu_pll_init(struct ssb_
+ 		ssb_pmu1_pllinit_r0(cc, crystalfreq);
+ 		break;
+ 	case 0x4328:
++		ssb_pmu0_pllinit_r0(cc, crystalfreq);
++		break;
  	case 0x5354:
++		if (crystalfreq == 0)
++			crystalfreq = 25000;
  		ssb_pmu0_pllinit_r0(cc, crystalfreq);
  		break;
 +	case 0x4322:
@@ -260,7 +301,7 @@
  	default:
  		ssb_printk(KERN_ERR PFX
  			   "ERROR: PLL init unknown for device %04X\n",
-@@ -396,12 +417,15 @@ static void ssb_pmu_resources_init(struc
+@@ -396,12 +424,15 @@ static void ssb_pmu_resources_init(struc
  	u32 min_msk = 0, max_msk = 0;
  	unsigned int i;
  	const struct pmu_res_updown_tab_entry *updown_tab = NULL;
@@ -278,7 +319,7 @@
  		/* We keep the default settings:
  		 * min_msk = 0xCBB
  		 * max_msk = 0x7FFFF
-@@ -480,9 +504,9 @@ static void ssb_pmu_resources_init(struc
+@@ -480,9 +511,9 @@ static void ssb_pmu_resources_init(struc
  		chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
  }
  
@@ -289,7 +330,7 @@
  	u32 pmucap;
  
  	if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon 
+@@ -494,15 +525,122 @@ void ssb_pmu_init(struct ssb_chipcommon
  	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
  		    cc->pmu.rev, pmucap);
  
@@ -390,6 +431,37 @@
 +
 +EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
 +EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);
++
++u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc)
++{
++	struct ssb_bus *bus = cc->dev->bus;
++
++	switch (bus->chip_id) {
++	case 0x5354:
++		/* 5354 chip uses a non programmable PLL of frequency 240MHz */
++		return 240000000;
++	default:
++		ssb_printk(KERN_ERR PFX
++			   "ERROR: PMU cpu clock unknown for device %04X\n",
++			   bus->chip_id);
++		return 0;
++	}
++}
++
++u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc)
++{
++	struct ssb_bus *bus = cc->dev->bus;
++
++	switch (bus->chip_id) {
++	case 0x5354:
++		return 120000000;
++	default:
++		ssb_printk(KERN_ERR PFX
++			   "ERROR: PMU controlclock unknown for device %04X\n",
++			   bus->chip_id);
++		return 0;
++	}
++}
 --- a/drivers/ssb/driver_gige.c
 +++ b/drivers/ssb/driver_gige.c
 @@ -3,7 +3,7 @@
@@ -574,7 +646,17 @@
  }
  
  static void ssb_mips_serial_init(struct ssb_mipscore *mcore)
-@@ -197,17 +253,23 @@ void ssb_mipscore_init(struct ssb_mipsco
+@@ -152,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m
+ 	struct ssb_bus *bus = mcore->dev->bus;
+ 	u32 pll_type, n, m, rate = 0;
+ 
++	if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
++		return ssb_pmu_get_cpu_clock(&bus->chipco);
++
+ 	if (bus->extif.dev) {
+ 		ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m);
+ 	} else if (bus->chipco.dev) {
+@@ -197,17 +256,23 @@ void ssb_mipscore_init(struct ssb_mipsco
  
  	/* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */
  	for (irq = 2, i = 0; i < bus->nr_devices; i++) {
@@ -601,7 +683,7 @@
  		case SSB_DEV_PCI:
  		case SSB_DEV_ETHERNET:
  		case SSB_DEV_ETHERNET_GBIT:
-@@ -218,8 +280,14 @@ void ssb_mipscore_init(struct ssb_mipsco
+@@ -218,8 +283,14 @@ void ssb_mipscore_init(struct ssb_mipsco
  				set_irq(dev, irq++);
  				break;
  			}
@@ -639,6 +721,15 @@
  
  static inline
  u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset)
+@@ -69,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_
+ 	u32 tmp;
+ 
+ 	/* We do only have one cardbus device behind the bridge. */
+-	if (pc->cardbusmode && (dev >= 1))
++	if (pc->cardbusmode && (dev > 1))
+ 		goto out;
+ 
+ 	if (bus == 0) {
 @@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore
  	.pci_ops	= &ssb_pcicore_pciops,
  	.io_resource	= &ssb_pcicore_io_resource,
@@ -1098,27 +1189,7 @@
  int ssb_for_each_bus_call(unsigned long data,
  			  int (*func)(struct ssb_bus *bus, unsigned long data))
  {
-@@ -120,6 +142,19 @@ static void ssb_device_put(struct ssb_de
- 		put_device(dev->dev);
- }
- 
-+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
-+{
-+	if (drv)
-+		get_driver(&drv->drv);
-+	return drv;
-+}
-+
-+static inline void ssb_driver_put(struct ssb_driver *drv)
-+{
-+	if (drv)
-+		put_driver(&drv->drv);
-+}
-+
- static int ssb_device_resume(struct device *dev)
- {
- 	struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
-@@ -190,90 +225,81 @@ int ssb_bus_suspend(struct ssb_bus *bus)
+@@ -190,90 +212,78 @@ int ssb_bus_suspend(struct ssb_bus *bus)
  EXPORT_SYMBOL(ssb_bus_suspend);
  
  #ifdef CONFIG_SSB_SPROM
@@ -1176,16 +1247,15 @@
 -			continue;
 -		drv = drv_to_ssb_drv(dev->dev->driver);
 -		if (!drv)
-+		sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
-+		if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
-+			ssb_device_put(sdev);
++		sdrv = drv_to_ssb_drv(sdev->dev->driver);
++		if (SSB_WARN_ON(!sdrv->remove))
  			continue;
 -		err = drv->suspend(dev, state);
 -		if (err) {
 -			ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n",
 -				   dev_name(dev->dev));
 -			goto err_unwind;
- 		}
+-		}
 +		sdrv->remove(sdev);
 +		ctx->device_frozen[i] = 1;
  	}
@@ -1252,7 +1322,6 @@
 +				   dev_name(sdev->dev));
 +			result = err;
  		}
-+		ssb_driver_put(sdrv);
 +		ssb_device_put(sdev);
  	}
  
@@ -1261,7 +1330,7 @@
  }
  #endif /* CONFIG_SSB_SPROM */
  
-@@ -360,6 +386,35 @@ static int ssb_device_uevent(struct devi
+@@ -360,6 +370,35 @@ static int ssb_device_uevent(struct devi
  			     ssb_dev->id.revision);
  }
  
@@ -1297,7 +1366,7 @@
  static struct bus_type ssb_bustype = {
  	.name		= "ssb",
  	.match		= ssb_bus_match,
-@@ -369,6 +424,7 @@ static struct bus_type ssb_bustype = {
+@@ -369,6 +408,7 @@ static struct bus_type ssb_bustype = {
  	.suspend	= ssb_device_suspend,
  	.resume		= ssb_device_resume,
  	.uevent		= ssb_device_uevent,
@@ -1305,7 +1374,7 @@
  };
  
  static void ssb_buses_lock(void)
-@@ -461,6 +517,7 @@ static int ssb_devices_register(struct s
+@@ -461,6 +501,7 @@ static int ssb_devices_register(struct s
  #ifdef CONFIG_SSB_PCIHOST
  			sdev->irq = bus->host_pci->irq;
  			dev->parent = &bus->host_pci->dev;
@@ -1313,7 +1382,7 @@
  #endif
  			break;
  		case SSB_BUSTYPE_PCMCIA:
-@@ -469,8 +526,14 @@ static int ssb_devices_register(struct s
+@@ -469,8 +510,14 @@ static int ssb_devices_register(struct s
  			dev->parent = &bus->host_pcmcia->dev;
  #endif
  			break;
@@ -1328,7 +1397,7 @@
  			break;
  		}
  
-@@ -497,7 +560,7 @@ error:
+@@ -497,7 +544,7 @@ error:
  }
  
  /* Needs ssb_buses_lock() */
@@ -1337,7 +1406,7 @@
  {
  	struct ssb_bus *bus, *n;
  	int err = 0;
-@@ -708,9 +771,9 @@ out:
+@@ -708,9 +755,9 @@ out:
  	return err;
  }
  
@@ -1350,7 +1419,7 @@
  {
  	int err;
  
-@@ -724,12 +787,18 @@ static int ssb_bus_register(struct ssb_b
+@@ -724,12 +771,18 @@ static int ssb_bus_register(struct ssb_b
  	err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1);
  	if (err)
  		goto out;
@@ -1370,7 +1439,7 @@
  
  	/* Init PCI-host device (if any) */
  	err = ssb_pci_init(bus);
-@@ -776,6 +845,8 @@ err_pci_exit:
+@@ -776,6 +829,8 @@ err_pci_exit:
  	ssb_pci_exit(bus);
  err_unmap:
  	ssb_iounmap(bus);
@@ -1379,7 +1448,7 @@
  err_disable_xtal:
  	ssb_buses_unlock();
  	ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0);
-@@ -783,8 +854,8 @@ err_disable_xtal:
+@@ -783,8 +838,8 @@ err_disable_xtal:
  }
  
  #ifdef CONFIG_SSB_PCIHOST
@@ -1390,7 +1459,7 @@
  {
  	int err;
  
-@@ -796,6 +867,9 @@ int ssb_bus_pcibus_register(struct ssb_b
+@@ -796,6 +851,9 @@ int ssb_bus_pcibus_register(struct ssb_b
  	if (!err) {
  		ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on "
  			   "PCI device %s\n", dev_name(&host_pci->dev));
@@ -1400,7 +1469,7 @@
  	}
  
  	return err;
-@@ -804,9 +878,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
+@@ -804,9 +862,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register);
  #endif /* CONFIG_SSB_PCIHOST */
  
  #ifdef CONFIG_SSB_PCMCIAHOST
@@ -1413,7 +1482,7 @@
  {
  	int err;
  
-@@ -825,9 +899,32 @@ int ssb_bus_pcmciabus_register(struct ss
+@@ -825,9 +883,32 @@ int ssb_bus_pcmciabus_register(struct ss
  EXPORT_SYMBOL(ssb_bus_pcmciabus_register);
  #endif /* CONFIG_SSB_PCMCIAHOST */
  
@@ -1449,7 +1518,7 @@
  {
  	int err;
  
-@@ -908,8 +1005,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
+@@ -908,8 +989,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32
  	switch (plltype) {
  	case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */
  		if (m & SSB_CHIPCO_CLK_T6_MMASK)
@@ -1460,7 +1529,17 @@
  	case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */
  	case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */
  	case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */
-@@ -1024,23 +1121,22 @@ static u32 ssb_tmslow_reject_bitmask(str
+@@ -999,6 +1080,9 @@ u32 ssb_clockspeed(struct ssb_bus *bus)
+ 	u32 plltype;
+ 	u32 clkctl_n, clkctl_m;
+ 
++	if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU)
++		return ssb_pmu_get_controlclock(&bus->chipco);
++
+ 	if (ssb_extif_available(&bus->extif))
+ 		ssb_extif_get_clockcontrol(&bus->extif, &plltype,
+ 					   &clkctl_n, &clkctl_m);
+@@ -1024,23 +1108,22 @@ static u32 ssb_tmslow_reject_bitmask(str
  {
  	u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV;
  
@@ -1491,7 +1570,7 @@
  }
  
  int ssb_device_is_enabled(struct ssb_device *dev)
-@@ -1099,10 +1195,10 @@ void ssb_device_enable(struct ssb_device
+@@ -1099,10 +1182,10 @@ void ssb_device_enable(struct ssb_device
  }
  EXPORT_SYMBOL(ssb_device_enable);
  
@@ -1505,7 +1584,7 @@
  {
  	int i;
  	u32 val;
-@@ -1110,7 +1206,7 @@ static int ssb_wait_bit(struct ssb_devic
+@@ -1110,7 +1193,7 @@ static int ssb_wait_bit(struct ssb_devic
  	for (i = 0; i < timeout; i++) {
  		val = ssb_read32(dev, reg);
  		if (set) {
@@ -1514,7 +1593,7 @@
  				return 0;
  		} else {
  			if (!(val & bitmask))
-@@ -1127,20 +1223,38 @@ static int ssb_wait_bit(struct ssb_devic
+@@ -1127,20 +1210,38 @@ static int ssb_wait_bit(struct ssb_devic
  
  void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags)
  {
@@ -1562,7 +1641,7 @@
  
  	ssb_write32(dev, SSB_TMSLOW,
  		    reject | SSB_TMSLOW_RESET |
-@@ -1149,13 +1263,34 @@ void ssb_device_disable(struct ssb_devic
+@@ -1149,13 +1250,34 @@ void ssb_device_disable(struct ssb_devic
  }
  EXPORT_SYMBOL(ssb_device_disable);
  
@@ -1598,7 +1677,7 @@
  	default:
  		__ssb_dma_not_implemented(dev);
  	}
-@@ -1272,20 +1407,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
+@@ -1272,20 +1394,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown);
  
  int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl)
  {
@@ -1623,7 +1702,7 @@
  	return 0;
  error:
  	ssb_printk(KERN_ERR PFX "Bus powerup failed\n");
-@@ -1293,6 +1428,37 @@ error:
+@@ -1293,6 +1415,37 @@ error:
  }
  EXPORT_SYMBOL(ssb_bus_powerup);
  
@@ -1661,7 +1740,7 @@
  u32 ssb_admatch_base(u32 adm)
  {
  	u32 base = 0;
-@@ -1358,8 +1524,10 @@ static int __init ssb_modinit(void)
+@@ -1358,8 +1511,10 @@ static int __init ssb_modinit(void)
  	ssb_buses_lock();
  	err = ssb_attach_queued_buses();
  	ssb_buses_unlock();
@@ -1673,7 +1752,7 @@
  
  	err = b43_pci_ssb_bridge_init();
  	if (err) {
-@@ -1375,7 +1543,7 @@ static int __init ssb_modinit(void)
+@@ -1375,7 +1530,7 @@ static int __init ssb_modinit(void)
  		/* don't fail SSB init because of this */
  		err = 0;
  	}
@@ -1720,7 +1799,7 @@
  
  static inline u8 ssb_crc8(u8 crc, u8 data)
  {
-@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus 
+@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
  	int i;
  
  	for (i = 0; i < bus->sprom_size; i++)
@@ -1738,10 +1817,40 @@
  		mmiowb();
  		msleep(20);
  	}
-@@ -399,6 +406,46 @@ static void sprom_extract_r123(struct ss
- 	out->antenna_gain.ghz5.a3 = gain;
- }
+@@ -324,7 +331,6 @@ static void sprom_extract_r123(struct ss
+ {
+ 	int i;
+ 	u16 v;
+-	s8 gain;
+ 	u16 loc[3];
+ 
+ 	if (out->revision == 3)			/* rev 3 moved MAC */
+@@ -383,20 +389,52 @@ static void sprom_extract_r123(struct ss
+ 		SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0);
  
+ 	/* Extract the antenna gain values. */
+-	gain = r123_extract_antgain(out->revision, in,
+-				    SSB_SPROM1_AGAIN_BG,
+-				    SSB_SPROM1_AGAIN_BG_SHIFT);
+-	out->antenna_gain.ghz24.a0 = gain;
+-	out->antenna_gain.ghz24.a1 = gain;
+-	out->antenna_gain.ghz24.a2 = gain;
+-	out->antenna_gain.ghz24.a3 = gain;
+-	gain = r123_extract_antgain(out->revision, in,
+-				    SSB_SPROM1_AGAIN_A,
+-				    SSB_SPROM1_AGAIN_A_SHIFT);
+-	out->antenna_gain.ghz5.a0 = gain;
+-	out->antenna_gain.ghz5.a1 = gain;
+-	out->antenna_gain.ghz5.a2 = gain;
+-	out->antenna_gain.ghz5.a3 = gain;
++	out->antenna_gain.a0 = r123_extract_antgain(out->revision, in,
++						    SSB_SPROM1_AGAIN_BG,
++						    SSB_SPROM1_AGAIN_BG_SHIFT);
++	out->antenna_gain.a1 = r123_extract_antgain(out->revision, in,
++						    SSB_SPROM1_AGAIN_A,
++						    SSB_SPROM1_AGAIN_A_SHIFT);
++}
++
 +/* Revs 4 5 and 8 have partially shared layout */
 +static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
 +{
@@ -1780,12 +1889,10 @@
 +	     SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
 +	SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
 +	     SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
-+}
-+
+ }
+ 
  static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
- {
- 	int i;
-@@ -421,10 +468,14 @@ static void sprom_extract_r45(struct ssb
+@@ -421,10 +459,14 @@ static void sprom_extract_r45(struct ssb
  		SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
  		SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
  		SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
@@ -1800,15 +1907,30 @@
  	}
  	SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
  	     SSB_SPROM4_ANTAVAIL_A_SHIFT);
-@@ -464,22 +515,32 @@ static void sprom_extract_r45(struct ssb
- 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- 	       sizeof(out->antenna_gain.ghz5));
+@@ -453,16 +495,16 @@ static void sprom_extract_r45(struct ssb
+ 	}
  
-+	sprom_extract_r458(out, in);
+ 	/* Extract the antenna gain values. */
+-	SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
++	SPEX(antenna_gain.a0, SSB_SPROM4_AGAIN01,
+ 	     SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
+-	SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01,
++	SPEX(antenna_gain.a1, SSB_SPROM4_AGAIN01,
+ 	     SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
+-	SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23,
++	SPEX(antenna_gain.a2, SSB_SPROM4_AGAIN23,
+ 	     SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
+-	SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23,
++	SPEX(antenna_gain.a3, SSB_SPROM4_AGAIN23,
+ 	     SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
+-	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+-	       sizeof(out->antenna_gain.ghz5));
 +
++	sprom_extract_r458(out, in);
+ 
  	/* TODO - get remaining rev 4 stuff needed */
  }
- 
+@@ -470,16 +512,24 @@ static void sprom_extract_r45(struct ssb
  static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
  {
  	int i;
@@ -1835,7 +1957,7 @@
  	SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
  	     SSB_SPROM8_ANTAVAIL_A_SHIFT);
  	SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-@@ -490,12 +551,55 @@ static void sprom_extract_r8(struct ssb_
+@@ -490,24 +540,122 @@ static void sprom_extract_r8(struct ssb_
  	SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
  	SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
  	     SSB_SPROM8_ITSSI_A_SHIFT);
@@ -1890,11 +2012,21 @@
 +	SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
  
  	/* Extract the antenna gain values. */
- 	SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
-@@ -509,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
- 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
- 	       sizeof(out->antenna_gain.ghz5));
- 
+-	SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
++	SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01,
+ 	     SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
+-	SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01,
++	SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01,
+ 	     SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
+-	SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23,
++	SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23,
+ 	     SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
+-	SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23,
++	SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23,
+ 	     SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
+-	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
+-	       sizeof(out->antenna_gain.ghz5));
++
 +	/* Extract cores power info info */
 +	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
 +		o = pwr_info_offset[i];
@@ -1951,11 +2083,10 @@
 +		SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT);
 +
 +	sprom_extract_r458(out, in);
-+
+ 
  	/* TODO - get remaining rev 8 stuff needed */
  }
- 
-@@ -521,36 +682,34 @@ static int sprom_extract(struct ssb_bus 
+@@ -521,36 +669,34 @@ static int sprom_extract(struct ssb_bus
  	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
  	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
  	memset(out->et1mac, 0xFF, 6);
@@ -2013,7 +2144,7 @@
  	}
  
  	if (out->boardflags_lo == 0xFFFF)
-@@ -564,13 +723,34 @@ static int sprom_extract(struct ssb_bus 
+@@ -564,13 +710,34 @@ static int sprom_extract(struct ssb_bus
  static int ssb_pci_sprom_get(struct ssb_bus *bus,
  			     struct ssb_sprom *sprom)
  {
@@ -2051,7 +2182,7 @@
  	bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
  	sprom_do_read(bus, buf);
  	err = sprom_check_crc(buf, bus->sprom_size);
-@@ -580,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -580,17 +747,24 @@ static int ssb_pci_sprom_get(struct ssb_
  		buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
  			      GFP_KERNEL);
  		if (!buf)
@@ -2081,7 +2212,7 @@
  				err = 0;
  				goto out_free;
  			}
-@@ -602,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -602,19 +776,15 @@ static int ssb_pci_sprom_get(struct ssb_
  
  out_free:
  	kfree(buf);
@@ -2188,7 +2319,7 @@
  			   "Could not disable SPROM write access.\n");
  		failed = 1;
  	}
-@@ -617,134 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co
+@@ -617,134 +617,136 @@ static int ssb_pcmcia_sprom_check_crc(co
  	}						\
    } while (0)
  
@@ -2268,14 +2399,10 @@
 +	case SSB_PCMCIA_CIS_ANTGAIN:
 +		GOTO_ERROR_ON(tuple->TupleDataLen != 2,
 +			"antg tpl size");
-+		sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1];
-+		sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1];
++		sprom->antenna_gain.a0 = tuple->TupleData[1];
++		sprom->antenna_gain.a1 = tuple->TupleData[1];
++		sprom->antenna_gain.a2 = tuple->TupleData[1];
++		sprom->antenna_gain.a3 = tuple->TupleData[1];
 +		break;
 +	case SSB_PCMCIA_CIS_BFLAGS:
 +		GOTO_ERROR_ON((tuple->TupleDataLen != 3) &&
@@ -2493,7 +2620,7 @@
  	}
  	bus->mmio = NULL;
  	bus->mapped_device = NULL;
-@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct 
+@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
  		SSB_BUG_ON(1); /* Can't reach this code. */
  #endif
  		break;
@@ -2526,7 +2653,17 @@
  			bus->chip_package = 0;
  		} else {
  			bus->chip_id = 0x4710;
-@@ -339,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
+@@ -303,6 +320,9 @@ int ssb_bus_scan(struct ssb_bus *bus,
+ 			bus->chip_package = 0;
+ 		}
+ 	}
++	ssb_printk(KERN_INFO PFX "Found chip with id 0x%04X, rev 0x%02X and "
++		   "package 0x%02X\n", bus->chip_id, bus->chip_rev,
++		   bus->chip_package);
+ 	if (!bus->nr_devices)
+ 		bus->nr_devices = chipid_to_nrcores(bus->chip_id);
+ 	if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
+@@ -339,7 +359,7 @@ int ssb_bus_scan(struct ssb_bus *bus,
  		dev->bus = bus;
  		dev->ops = bus->ops;
  
@@ -2535,7 +2672,7 @@
  			    "Core %d found: %s "
  			    "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
  			    i, ssb_core_name(dev->id.coreid),
-@@ -407,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
+@@ -407,6 +427,16 @@ int ssb_bus_scan(struct ssb_bus *bus,
  			bus->pcicore.dev = dev;
  #endif /* CONFIG_SSB_DRIVER_PCICORE */
  			break;
@@ -2554,7 +2691,7 @@
  		}
 --- /dev/null
 +++ b/drivers/ssb/sdio.c
-@@ -0,0 +1,610 @@
+@@ -0,0 +1,606 @@
 +/*
 + * Sonics Silicon Backplane
 + * SDIO-Hostbus related functions
@@ -3108,14 +3245,10 @@
 +			case SSB_SDIO_CIS_ANTGAIN:
 +				GOTO_ERROR_ON(tuple->size != 2,
 +					      "antg tpl size");
-+				sprom->antenna_gain.ghz24.a0 = tuple->data[1];
-+				sprom->antenna_gain.ghz24.a1 = tuple->data[1];
-+				sprom->antenna_gain.ghz24.a2 = tuple->data[1];
-+				sprom->antenna_gain.ghz24.a3 = tuple->data[1];
-+				sprom->antenna_gain.ghz5.a0 = tuple->data[1];
-+				sprom->antenna_gain.ghz5.a1 = tuple->data[1];
-+				sprom->antenna_gain.ghz5.a2 = tuple->data[1];
-+				sprom->antenna_gain.ghz5.a3 = tuple->data[1];
++				sprom->antenna_gain.a0 = tuple->data[1];
++				sprom->antenna_gain.a1 = tuple->data[1];
++				sprom->antenna_gain.a2 = tuple->data[1];
++				sprom->antenna_gain.a3 = tuple->data[1];
 +				break;
 +			case SSB_SDIO_CIS_BFLAGS:
 +				GOTO_ERROR_ON((tuple->size != 3) &&
@@ -3413,12 +3546,16 @@
  static inline int b43_pci_ssb_bridge_init(void)
  {
  	return 0;
-@@ -156,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini
+@@ -156,6 +205,10 @@ static inline int b43_pci_ssb_bridge_ini
  static inline void b43_pci_ssb_bridge_exit(void)
  {
  }
 -#endif /* CONFIG_SSB_PCIHOST */
 +#endif /* CONFIG_SSB_B43_PCI_BRIDGE */
++
++/* driver_chipcommon_pmu.c */
++extern u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc);
++extern u32 ssb_pmu_get_controlclock(struct ssb_chipcommon *cc);
  
  #endif /* LINUX_SSB_PRIVATE_H_ */
 --- a/include/linux/pci_ids.h
@@ -3440,23 +3577,26 @@
 +struct ssb_sprom_core_pwr_info {
 +	u8 itssi_2g, itssi_5g;
 +	u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
-+	u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++	u16 pa_2g[4], pa_5gl[4], pa_5g[4], pa_5gh[4];
 +};
 +
  struct ssb_sprom {
  	u8 revision;
  	u8 il0mac[6];		/* MAC address for 802.11b/g */
-@@ -25,26 +31,64 @@ struct ssb_sprom {
+@@ -25,47 +31,164 @@ struct ssb_sprom {
  	u8 et1phyaddr;		/* MII address for enet1 */
  	u8 et0mdcport;		/* MDIO for enet0 */
  	u8 et1mdcport;		/* MDIO for enet1 */
 -	u8 board_rev;		/* Board revision number from SPROM. */
 +	u16 board_rev;		/* Board revision number from SPROM. */
++	u16 board_num;		/* Board number from SPROM. */
++	u16 board_type;		/* Board type from SPROM. */
  	u8 country_code;	/* Country Code */
 -	u8 ant_available_a;	/* A-PHY antenna available bits (up to 4) */
 -	u8 ant_available_bg;	/* B/G-PHY antenna available bits (up to 4) */
-+	u16 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
-+	u16 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
++	char alpha2[2];		/* Country Code as two chars like EU or US */
++	u8 leddc_on_time;	/* LED Powersave Duty Cycle On Count */
++	u8 leddc_off_time;	/* LED Powersave Duty Cycle Off Count */
 +	u8 ant_available_a;	/* 2GHz antenna available bits (up to 4) */
 +	u8 ant_available_bg;	/* 5GHz antenna available bits (up to 4) */
  	u16 pa0b0;
@@ -3477,10 +3617,10 @@
  	u8 gpio3;		/* GPIO pin 3 */
 -	u16 maxpwr_a;		/* A-PHY Amplifier Max Power (in dBm Q5.2) */
 -	u16 maxpwr_bg;		/* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
-+	u16 maxpwr_bg;		/* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
-+	u16 maxpwr_al;		/* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
-+	u16 maxpwr_a;		/* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
-+	u16 maxpwr_ah;		/* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
++	u8 maxpwr_bg;		/* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
++	u8 maxpwr_al;		/* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
++	u8 maxpwr_a;		/* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
++	u8 maxpwr_ah;		/* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
  	u8 itssi_a;		/* Idle TSSI Target for A-PHY */
  	u8 itssi_bg;		/* Idle TSSI Target for B/G-PHY */
 -	u16 boardflags_lo;	/* Boardflags (low 16 bits) */
@@ -3493,8 +3633,8 @@
 +	u8 txpid5gl[4];		/* 4.9 - 5.1GHz TX power index */
 +	u8 txpid5g[4];		/* 5.1 - 5.5GHz TX power index */
 +	u8 txpid5gh[4];		/* 5.5 - ...GHz TX power index */
-+	u8 rxpo2g;		/* 2GHz RX power offset */
-+	u8 rxpo5g;		/* 5GHz RX power offset */
++	s8 rxpo2g;		/* 2GHz RX power offset */
++	s8 rxpo5g;		/* 5GHz RX power offset */
 +	u8 rssisav2g;		/* 2GHz RSSI params */
 +	u8 rssismc2g;
 +	u8 rssismf2g;
@@ -3518,8 +3658,15 @@
  
  	/* Antenna gain values for up to 4 antennas
  	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
-@@ -58,14 +102,23 @@ struct ssb_sprom {
- 		} ghz5;		/* 5GHz band */
+ 	 * loss in the connectors is bigger than the gain. */
+ 	struct {
+-		struct {
+-			s8 a0, a1, a2, a3;
+-		} ghz24;	/* 2.4GHz band */
+-		struct {
+-			s8 a0, a1, a2, a3;
+-		} ghz5;		/* 5GHz band */
++		s8 a0, a1, a2, a3;
  	} antenna_gain;
  
 -	/* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
@@ -3532,7 +3679,79 @@
 +		} ghz5;
 +	} fem;
 +
-+	/* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
++	u16 mcs2gpo[8];
++	u16 mcs5gpo[8];
++	u16 mcs5glpo[8];
++	u16 mcs5ghpo[8];
++	u8 opo;
++
++	u8 rxgainerr2ga[3];
++	u8 rxgainerr5gla[3];
++	u8 rxgainerr5gma[3];
++	u8 rxgainerr5gha[3];
++	u8 rxgainerr5gua[3];
++
++	u8 noiselvl2ga[3];
++	u8 noiselvl5gla[3];
++	u8 noiselvl5gma[3];
++	u8 noiselvl5gha[3];
++	u8 noiselvl5gua[3];
++
++	u8 regrev;
++	u8 txchain;
++	u8 rxchain;
++	u8 antswitch;
++	u16 cddpo;
++	u16 stbcpo;
++	u16 bw40po;
++	u16 bwduppo;
++
++	u8 tempthresh;
++	u8 tempoffset;
++	u16 rawtempsense;
++	u8 measpower;
++	u8 tempsense_slope;
++	u8 tempcorrx;
++	u8 tempsense_option;
++	u8 freqoffset_corr;
++	u8 iqcal_swp_dis;
++	u8 hw_iqcal_en;
++	u8 elna2g;
++	u8 elna5g;
++	u8 phycal_tempdelta;
++	u8 temps_period;
++	u8 temps_hysteresis;
++	u8 measpower1;
++	u8 measpower2;
++	u8 pcieingress_war;
++
++	/* power per rate from sromrev 9 */
++	u16 cckbw202gpo;
++	u16 cckbw20ul2gpo;
++	u32 legofdmbw202gpo;
++	u32 legofdmbw20ul2gpo;
++	u32 legofdmbw205glpo;
++	u32 legofdmbw20ul5glpo;
++	u32 legofdmbw205gmpo;
++	u32 legofdmbw20ul5gmpo;
++	u32 legofdmbw205ghpo;
++	u32 legofdmbw20ul5ghpo;
++	u32 mcsbw202gpo;
++	u32 mcsbw20ul2gpo;
++	u32 mcsbw402gpo;
++	u32 mcsbw205glpo;
++	u32 mcsbw20ul5glpo;
++	u32 mcsbw405glpo;
++	u32 mcsbw205gmpo;
++	u32 mcsbw20ul5gmpo;
++	u32 mcsbw405gmpo;
++	u32 mcsbw205ghpo;
++	u32 mcsbw20ul5ghpo;
++	u32 mcsbw405ghpo;
++	u16 mcs32po;
++	u16 legofdm40duppo;
++	u8 sar2g;
++	u8 sar5g;
  };
  
  /* Information about the PCB the circuitry is soldered on. */
@@ -3544,7 +3763,7 @@
  };
  
  
-@@ -137,7 +190,7 @@ struct ssb_device {
+@@ -137,7 +260,7 @@ struct ssb_device {
  	 * is an optimization. */
  	const struct ssb_bus_ops *ops;
  
@@ -3553,7 +3772,7 @@
  
  	struct ssb_bus *bus;
  	struct ssb_device_id id;
-@@ -195,10 +248,9 @@ struct ssb_driver {
+@@ -195,10 +318,9 @@ struct ssb_driver {
  #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
  
  extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -3567,7 +3786,7 @@
  extern void ssb_driver_unregister(struct ssb_driver *drv);
  
  
-@@ -208,6 +260,7 @@ enum ssb_bustype {
+@@ -208,6 +330,7 @@ enum ssb_bustype {
  	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
  	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
  	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
@@ -3575,7 +3794,7 @@
  };
  
  /* board_vendor */
-@@ -238,20 +291,33 @@ struct ssb_bus {
+@@ -238,20 +361,33 @@ struct ssb_bus {
  
  	const struct ssb_bus_ops *ops;
  
@@ -3617,7 +3836,7 @@
  
  #ifdef CONFIG_SSB_SPROM
  	/* Mutex to protect the SPROM writing. */
-@@ -260,7 +326,8 @@ struct ssb_bus {
+@@ -260,7 +396,8 @@ struct ssb_bus {
  
  	/* ID information about the Chip. */
  	u16 chip_id;
@@ -3627,7 +3846,7 @@
  	u16 sprom_size;		/* number of words in sprom */
  	u8 chip_package;
  
-@@ -306,6 +373,11 @@ struct ssb_bus {
+@@ -306,6 +443,11 @@ struct ssb_bus {
  #endif /* DEBUG */
  };
  
@@ -3639,7 +3858,7 @@
  /* The initialization-invariants. */
  struct ssb_init_invariants {
  	/* Versioning information about the PCB. */
-@@ -336,12 +408,23 @@ extern int ssb_bus_pcmciabus_register(st
+@@ -336,12 +478,23 @@ extern int ssb_bus_pcmciabus_register(st
  				      struct pcmcia_device *pcmcia_dev,
  				      unsigned long baseaddr);
  #endif /* CONFIG_SSB_PCMCIAHOST */
@@ -3664,7 +3883,7 @@
  
  /* Suspend a SSB bus.
   * Call this from the parent bus suspend routine. */
-@@ -612,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct 
+@@ -612,6 +765,7 @@ extern int ssb_bus_may_powerdown(struct
   * Otherwise static always-on powercontrol will be used. */
  extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
  
@@ -4304,3 +4523,13 @@
   *
   * Licensed under the GNU/GPL. See COPYING for details.
   */
+--- a/include/linux/ssb/ssb_driver_gige.h
++++ b/include/linux/ssb/ssb_driver_gige.h
+@@ -2,6 +2,7 @@
+ #define LINUX_SSB_DRIVER_GIGE_H_
+ 
+ #include <linux/ssb/ssb.h>
++#include <linux/bug.h>
+ #include <linux/pci.h>
+ #include <linux/spinlock.h>
+