kernel: add a recent upstream commit (post-3.3) to the ssb update patch, required for the next mac80211 update

SVN-Revision: 30345

1 files changed, 114 insertions, 23 deletions

diff --git a/target/linux/generic/patches-2.6.31/941-ssb_update.patch b/target/linux/generic/patches-2.6.31/941-ssb_update.patch
index e86ec9b..82c0ff3 100644
--- a/target/linux/generic/patches-2.6.31/941-ssb_update.patch
+++ b/target/linux/generic/patches-2.6.31/941-ssb_update.patch
@@ -225,7 +225,7 @@
   * Copyright 2007, Broadcom Corporation
   *
   * Licensed under the GNU/GPL. See COPYING for details.
-@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct
+@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct 
  	chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
  }
  
@@ -289,7 +289,7 @@
  	u32 pmucap;
  
  	if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon
+@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon 
  	ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
  		    cc->pmu.rev, pmucap);
  
@@ -1577,7 +1577,7 @@
  
  static inline u8 ssb_crc8(u8 crc, u8 data)
  {
-@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus
+@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus 
  	int i;
  
  	for (i = 0; i < bus->sprom_size; i++)
@@ -1657,7 +1657,7 @@
  	}
  	SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
  	     SSB_SPROM4_ANTAVAIL_A_SHIFT);
-@@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb
+@@ -464,22 +515,32 @@ static void sprom_extract_r45(struct ssb
  	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
  	       sizeof(out->antenna_gain.ghz5));
  
@@ -1666,7 +1666,17 @@
  	/* TODO - get remaining rev 4 stuff needed */
  }
  
-@@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_
+ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
+ {
+ 	int i;
+-	u16 v;
++	u16 v, o;
++	u16 pwr_info_offset[] = {
++		SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1,
++		SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3
++	};
++	BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) !=
++			ARRAY_SIZE(out->core_pwr_info));
  
  	/* extract the MAC address */
  	for (i = 0; i < 3; i++) {
@@ -1682,7 +1692,7 @@
  	SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
  	     SSB_SPROM8_ANTAVAIL_A_SHIFT);
  	SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-@@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_
+@@ -490,12 +551,55 @@ static void sprom_extract_r8(struct ssb_
  	SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
  	SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
  	     SSB_SPROM8_ITSSI_A_SHIFT);
@@ -1738,10 +1748,42 @@
  
  	/* Extract the antenna gain values. */
  	SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
-@@ -509,6 +607,31 @@ static void sprom_extract_r8(struct ssb_
+@@ -509,6 +613,63 @@ static void sprom_extract_r8(struct ssb_
  	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
  	       sizeof(out->antenna_gain.ghz5));
  
++	/* Extract cores power info info */
++	for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
++		o = pwr_info_offset[i];
++		SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++			SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT);
++		SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI,
++			SSB_SPROM8_2G_MAXP, 0);
++
++		SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0);
++		SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0);
++		SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0);
++
++		SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++			SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT);
++		SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI,
++			SSB_SPROM8_5G_MAXP, 0);
++		SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP,
++			SSB_SPROM8_5GH_MAXP, 0);
++		SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP,
++			SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT);
++
++		SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0);
++		SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0);
++		SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0);
++		SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0);
++		SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0);
++		SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0);
++		SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0);
++		SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0);
++		SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0);
++	}
++
 +	/* Extract FEM info */
 +	SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G,
 +		SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT);
@@ -1770,7 +1812,7 @@
  	/* TODO - get remaining rev 8 stuff needed */
  }
  
-@@ -521,36 +644,34 @@ static int sprom_extract(struct ssb_bus
+@@ -521,36 +682,34 @@ static int sprom_extract(struct ssb_bus 
  	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
  	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
  	memset(out->et1mac, 0xFF, 6);
@@ -1828,7 +1870,7 @@
  	}
  
  	if (out->boardflags_lo == 0xFFFF)
-@@ -564,13 +685,34 @@ static int sprom_extract(struct ssb_bus
+@@ -564,13 +723,34 @@ static int sprom_extract(struct ssb_bus 
  static int ssb_pci_sprom_get(struct ssb_bus *bus,
  			     struct ssb_sprom *sprom)
  {
@@ -1866,7 +1908,7 @@
  	bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
  	sprom_do_read(bus, buf);
  	err = sprom_check_crc(buf, bus->sprom_size);
-@@ -580,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -580,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_
  		buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
  			      GFP_KERNEL);
  		if (!buf)
@@ -1896,7 +1938,7 @@
  				err = 0;
  				goto out_free;
  			}
-@@ -602,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_
+@@ -602,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_
  
  out_free:
  	kfree(buf);
@@ -2292,7 +2334,7 @@
  	}
  	bus->mmio = NULL;
  	bus->mapped_device = NULL;
-@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct
+@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct 
  		SSB_BUG_ON(1); /* Can't reach this code. */
  #endif
  		break;
@@ -3199,7 +3241,20 @@
  #define PCI_DEVICE_ID_TIGON3_5752M	0x1601
 --- a/include/linux/ssb/ssb.h
 +++ b/include/linux/ssb/ssb.h
-@@ -25,26 +25,62 @@ struct ssb_sprom {
+@@ -16,6 +16,12 @@ struct pcmcia_device;
+ struct ssb_bus;
+ struct ssb_driver;
+ 
++struct ssb_sprom_core_pwr_info {
++	u8 itssi_2g, itssi_5g;
++	u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh;
++	u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3];
++};
++
+ struct ssb_sprom {
+ 	u8 revision;
+ 	u8 il0mac[6];		/* MAC address for 802.11b/g */
+@@ -25,26 +31,64 @@ struct ssb_sprom {
  	u8 et1phyaddr;		/* MII address for enet1 */
  	u8 et0mdcport;		/* MDIO for enet0 */
  	u8 et1mdcport;		/* MDIO for enet1 */
@@ -3266,10 +3321,12 @@
 +	u16 boardflags2_lo;	/* Board flags (bits 32-47) */
 +	u16 boardflags2_hi;	/* Board flags (bits 48-63) */
 +	/* TODO store board flags in a single u64 */
++
++	struct ssb_sprom_core_pwr_info core_pwr_info[4];
  
  	/* Antenna gain values for up to 4 antennas
  	 * on each band. Values in dBm/4 (Q5.2). Negative gain means the
-@@ -58,14 +94,23 @@ struct ssb_sprom {
+@@ -58,14 +102,23 @@ struct ssb_sprom {
  		} ghz5;		/* 5GHz band */
  	} antenna_gain;
  
@@ -3295,7 +3352,7 @@
  };
  
  
-@@ -137,7 +182,7 @@ struct ssb_device {
+@@ -137,7 +190,7 @@ struct ssb_device {
  	 * is an optimization. */
  	const struct ssb_bus_ops *ops;
  
@@ -3304,7 +3361,7 @@
  
  	struct ssb_bus *bus;
  	struct ssb_device_id id;
-@@ -195,10 +240,9 @@ struct ssb_driver {
+@@ -195,10 +248,9 @@ struct ssb_driver {
  #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv)
  
  extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner);
@@ -3318,7 +3375,7 @@
  extern void ssb_driver_unregister(struct ssb_driver *drv);
  
  
-@@ -208,6 +252,7 @@ enum ssb_bustype {
+@@ -208,6 +260,7 @@ enum ssb_bustype {
  	SSB_BUSTYPE_SSB,	/* This SSB bus is the system bus */
  	SSB_BUSTYPE_PCI,	/* SSB is connected to PCI bus */
  	SSB_BUSTYPE_PCMCIA,	/* SSB is connected to PCMCIA bus */
@@ -3326,7 +3383,7 @@
  };
  
  /* board_vendor */
-@@ -238,20 +283,33 @@ struct ssb_bus {
+@@ -238,20 +291,33 @@ struct ssb_bus {
  
  	const struct ssb_bus_ops *ops;
  
@@ -3368,7 +3425,7 @@
  
  #ifdef CONFIG_SSB_SPROM
  	/* Mutex to protect the SPROM writing. */
-@@ -260,7 +318,8 @@ struct ssb_bus {
+@@ -260,7 +326,8 @@ struct ssb_bus {
  
  	/* ID information about the Chip. */
  	u16 chip_id;
@@ -3378,7 +3435,7 @@
  	u16 sprom_size;		/* number of words in sprom */
  	u8 chip_package;
  
-@@ -306,6 +365,11 @@ struct ssb_bus {
+@@ -306,6 +373,11 @@ struct ssb_bus {
  #endif /* DEBUG */
  };
  
@@ -3390,7 +3447,7 @@
  /* The initialization-invariants. */
  struct ssb_init_invariants {
  	/* Versioning information about the PCB. */
-@@ -336,12 +400,23 @@ extern int ssb_bus_pcmciabus_register(st
+@@ -336,12 +408,23 @@ extern int ssb_bus_pcmciabus_register(st
  				      struct pcmcia_device *pcmcia_dev,
  				      unsigned long baseaddr);
  #endif /* CONFIG_SSB_PCMCIAHOST */
@@ -3415,7 +3472,7 @@
  
  /* Suspend a SSB bus.
   * Call this from the parent bus suspend routine. */
-@@ -612,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct
+@@ -612,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct 
   * Otherwise static always-on powercontrol will be used. */
  extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl);
  
@@ -3684,7 +3741,7 @@
  #define  SSB_SPROM3_CCKPO_1M		0x000F	/* 1M Rate PO */
  #define  SSB_SPROM3_CCKPO_2M		0x00F0	/* 2M Rate PO */
  #define  SSB_SPROM3_CCKPO_2M_SHIFT	4
-@@ -264,104 +267,257 @@
+@@ -264,104 +267,291 @@
  #define  SSB_SPROM3_OFDMGPO		0x107A	/* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
  
  /* SPROM Revision 4 */
@@ -3925,6 +3982,39 @@
 +#define SSB_SPROM8_TS_SLP_OPT_CORRX	0x00B6
 +#define SSB_SPROM8_FOC_HWIQ_IQSWP	0x00B8
 +#define SSB_SPROM8_PHYCAL_TEMPDELTA	0x00BA
++
++/* There are 4 blocks with power info sharing the same layout */
++#define SSB_SROM8_PWR_INFO_CORE0	0x00C0
++#define SSB_SROM8_PWR_INFO_CORE1	0x00E0
++#define SSB_SROM8_PWR_INFO_CORE2	0x0100
++#define SSB_SROM8_PWR_INFO_CORE3	0x0120
++
++#define SSB_SROM8_2G_MAXP_ITSSI		0x00
++#define  SSB_SPROM8_2G_MAXP		0x00FF
++#define  SSB_SPROM8_2G_ITSSI		0xFF00
++#define  SSB_SPROM8_2G_ITSSI_SHIFT	8
++#define SSB_SROM8_2G_PA_0		0x02	/* 2GHz power amp settings */
++#define SSB_SROM8_2G_PA_1		0x04
++#define SSB_SROM8_2G_PA_2		0x06
++#define SSB_SROM8_5G_MAXP_ITSSI		0x08	/* 5GHz ITSSI and 5.3GHz Max Power */
++#define  SSB_SPROM8_5G_MAXP		0x00FF
++#define  SSB_SPROM8_5G_ITSSI		0xFF00
++#define  SSB_SPROM8_5G_ITSSI_SHIFT	8
++#define SSB_SPROM8_5GHL_MAXP		0x0A	/* 5.2GHz and 5.8GHz Max Power */
++#define  SSB_SPROM8_5GH_MAXP		0x00FF
++#define  SSB_SPROM8_5GL_MAXP		0xFF00
++#define  SSB_SPROM8_5GL_MAXP_SHIFT	8
++#define SSB_SROM8_5G_PA_0		0x0C	/* 5.3GHz power amp settings */
++#define SSB_SROM8_5G_PA_1		0x0E
++#define SSB_SROM8_5G_PA_2		0x10
++#define SSB_SROM8_5GL_PA_0		0x12	/* 5.2GHz power amp settings */
++#define SSB_SROM8_5GL_PA_1		0x14
++#define SSB_SROM8_5GL_PA_2		0x16
++#define SSB_SROM8_5GH_PA_0		0x18	/* 5.8GHz power amp settings */
++#define SSB_SROM8_5GH_PA_1		0x1A
++#define SSB_SROM8_5GH_PA_2		0x1C
++
++/* TODO: Make it deprecated */
 +#define SSB_SPROM8_MAXP_BG		0x00C0  /* Max Power 2GHz in path 1 */
 +#define  SSB_SPROM8_MAXP_BG_MASK	0x00FF  /* Mask for Max Power 2GHz */
  #define  SSB_SPROM8_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
@@ -3951,6 +4041,7 @@
 +#define SSB_SPROM8_PA1HIB0		0x00D8	/* 5.8GHz power amp settings */
 +#define SSB_SPROM8_PA1HIB1		0x00DA
 +#define SSB_SPROM8_PA1HIB2		0x00DC
++
 +#define SSB_SPROM8_CCK2GPO		0x0140	/* CCK power offset */
 +#define SSB_SPROM8_OFDM2GPO		0x0142	/* 2.4GHz OFDM power offset */
 +#define SSB_SPROM8_OFDM5GPO		0x0146	/* 5.3GHz OFDM power offset */