kernel: split patches folder up into backport, pending and hack folders

* properly format/comment all patches
* merge debloat patches
* merge Kconfig patches
* merge swconfig patches
* merge hotplug patches
* drop 200-fix_localversion.patch - upstream
* drop 222-arm_zimage_none.patch - unused
* drop 252-mv_cesa_depends.patch - no longer required
* drop 410-mtd-move-forward-declaration-of-struct-mtd_info.patch - unused
* drop 661-fq_codel_keep_dropped_stats.patch - outdated
* drop 702-phy_add_aneg_done_function.patch - upstream
* drop 840-rtc7301.patch - unused
* drop 841-rtc_pt7c4338.patch - upstream
* drop 921-use_preinit_as_init.patch - unused
* drop spio-gpio-old and gpio-mmc - unused

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 250 insertions, 0 deletions

diff --git a/target/linux/generic/pending-3.18/840-rtc7301.patch b/target/linux/generic/pending-3.18/840-rtc7301.patch
new file mode 100644
index 0000000..2134d87
--- /dev/null
+++ b/target/linux/generic/pending-3.18/840-rtc7301.patch
@@ -0,0 +1,250 @@
+--- a/drivers/rtc/Kconfig
++++ b/drivers/rtc/Kconfig
+@@ -979,6 +979,15 @@ config RTC_DRV_NUC900
+ 	  If you say yes here you get support for the RTC subsystem of the
+ 	  NUC910/NUC920 used in embedded systems.
+ 
++config RTC_DRV_RTC7301
++	tristate "Epson RTC-7301 SF/DG"
++	help
++	  If you say Y here you will get support for the
++	  Epson RTC-7301 SF/DG RTC chips.
++
++	  This driver can also be built as a module. If so, the module
++	  will be called rtc-7301.
++
+ comment "on-CPU RTC drivers"
+ 
+ config RTC_DRV_DAVINCI
+--- a/drivers/rtc/Makefile
++++ b/drivers/rtc/Makefile
+@@ -115,6 +115,7 @@ obj-$(CONFIG_RTC_DRV_RP5C01)	+= rtc-rp5c
+ obj-$(CONFIG_RTC_DRV_RS5C313)	+= rtc-rs5c313.o
+ obj-$(CONFIG_RTC_DRV_RS5C348)	+= rtc-rs5c348.o
+ obj-$(CONFIG_RTC_DRV_RS5C372)	+= rtc-rs5c372.o
++obj-$(CONFIG_RTC_DRV_RTC7301)	+= rtc-rtc7301.o
+ obj-$(CONFIG_RTC_DRV_RV3029C2)	+= rtc-rv3029c2.o
+ obj-$(CONFIG_RTC_DRV_RX4581)	+= rtc-rx4581.o
+ obj-$(CONFIG_RTC_DRV_RX8025)	+= rtc-rx8025.o
+--- /dev/null
++++ b/drivers/rtc/rtc-rtc7301.c
+@@ -0,0 +1,219 @@
++/*
++ * Driver for Epson RTC-7301SF/DG
++ *
++ * Copyright (C) 2009 Jose Vasconcellos
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/rtc.h>
++#include <linux/platform_device.h>
++#include <linux/io.h>
++#include <linux/delay.h>
++#include <linux/bcd.h>
++
++#define RTC_NAME "rtc7301"
++#define RTC_VERSION "0.1"
++
++/* Epson RTC-7301 register addresses */
++#define RTC7301_SEC		0x00
++#define RTC7301_SEC10		0x01
++#define RTC7301_MIN		0x02
++#define RTC7301_MIN10		0x03
++#define RTC7301_HOUR		0x04
++#define RTC7301_HOUR10		0x05
++#define RTC7301_WEEKDAY		0x06
++#define RTC7301_DAY		0x07
++#define RTC7301_DAY10		0x08
++#define RTC7301_MON		0x09
++#define RTC7301_MON10		0x0A
++#define RTC7301_YEAR		0x0B
++#define RTC7301_YEAR10		0x0C
++#define RTC7301_YEAR100		0x0D
++#define RTC7301_YEAR1000	0x0E
++#define RTC7301_CTRLREG		0x0F
++
++static uint8_t __iomem *rtc7301_base;
++
++#define read_reg(offset) (readb(rtc7301_base + offset) & 0xf)
++#define write_reg(offset, data) writeb(data, rtc7301_base + (offset))
++
++#define rtc7301_isbusy() (read_reg(RTC7301_CTRLREG) & 1)
++
++static void rtc7301_init_settings(void)
++{
++	int i;
++
++	write_reg(RTC7301_CTRLREG, 2);
++	write_reg(RTC7301_YEAR1000, 2);
++	udelay(122);
++
++	/* bank 1 */
++	write_reg(RTC7301_CTRLREG, 6);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++
++	/* bank 2 */
++	write_reg(RTC7301_CTRLREG, 14);
++	for (i=0; i<15; i++)
++		write_reg(i, 0);
++	write_reg(RTC7301_CTRLREG, 0);
++}
++
++static int rtc7301_get_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int cnt;
++	uint8_t buf[16];
++
++	cnt = 0;
++	while (rtc7301_isbusy()) {
++		udelay(244);
++		if (cnt++ > 100) {
++			dev_err(dev, "%s: timeout error %x\n", __func__, rtc7301_base[RTC7301_CTRLREG]);
++			return -EIO;
++		}
++	}
++
++	for (cnt=0; cnt<16; cnt++)
++		buf[cnt] = read_reg(cnt);
++
++	if (buf[RTC7301_SEC10] & 8) {
++		dev_err(dev, "%s: RTC not set\n", __func__);
++		return -EINVAL;
++	}
++
++	memset(dt, 0, sizeof(*dt));
++
++	dt->tm_sec =  buf[RTC7301_SEC] + buf[RTC7301_SEC10]*10;
++	dt->tm_min =  buf[RTC7301_MIN] + buf[RTC7301_MIN10]*10;
++	dt->tm_hour = buf[RTC7301_HOUR] + buf[RTC7301_HOUR10]*10;
++
++	dt->tm_mday = buf[RTC7301_DAY] + buf[RTC7301_DAY10]*10;
++	dt->tm_mon =  buf[RTC7301_MON] + buf[RTC7301_MON10]*10 - 1;
++	dt->tm_year = buf[RTC7301_YEAR] + buf[RTC7301_YEAR10]*10 +
++		      buf[RTC7301_YEAR100]*100 +
++		      ((buf[RTC7301_YEAR1000] & 3)*1000) - 1900;
++
++	/* the rtc device may contain illegal values on power up
++	 * according to the data sheet. make sure they are valid.
++	 */
++
++	return rtc_valid_tm(dt);
++}
++
++static int rtc7301_set_datetime(struct device *dev, struct rtc_time *dt)
++{
++	int data;
++
++	data = dt->tm_year + 1900;
++	if (data >= 2100 || data < 1900)
++		return -EINVAL;
++
++	write_reg(RTC7301_CTRLREG, 2);
++       	udelay(122);
++
++	data = bin2bcd(dt->tm_sec);
++	write_reg(RTC7301_SEC, data);
++	write_reg(RTC7301_SEC10, (data >> 4));
++
++	data = bin2bcd(dt->tm_min);
++	write_reg(RTC7301_MIN, data );
++	write_reg(RTC7301_MIN10, (data >> 4));
++
++	data = bin2bcd(dt->tm_hour);
++	write_reg(RTC7301_HOUR, data);
++	write_reg(RTC7301_HOUR10, (data >> 4));
++
++	data = bin2bcd(dt->tm_mday);
++	write_reg(RTC7301_DAY, data);
++	write_reg(RTC7301_DAY10, (data>> 4));
++
++	data = bin2bcd(dt->tm_mon + 1);
++	write_reg(RTC7301_MON, data);
++	write_reg(RTC7301_MON10, (data >> 4));
++
++	data = bin2bcd(dt->tm_year % 100);
++	write_reg(RTC7301_YEAR, data);
++	write_reg(RTC7301_YEAR10, (data >> 4));
++	data = bin2bcd((1900 + dt->tm_year) / 100);
++	write_reg(RTC7301_YEAR100, data);
++
++	data = bin2bcd(dt->tm_wday);
++	write_reg(RTC7301_WEEKDAY, data);
++
++	write_reg(RTC7301_CTRLREG, 0);
++
++	return 0;
++}
++
++static const struct rtc_class_ops rtc7301_rtc_ops = {
++	.read_time	= rtc7301_get_datetime,
++	.set_time	= rtc7301_set_datetime,
++};
++
++static int rtc7301_probe(struct platform_device *pdev)
++{
++	struct rtc_device *rtc;
++	struct resource *res;
++
++	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	if (!res)
++		return -ENOENT;
++
++	rtc7301_base = ioremap_nocache(res->start, 0x1000 /*res->end - res->start + 1*/);
++	if (!rtc7301_base)
++		return -EINVAL;
++
++	rtc = rtc_device_register(RTC_NAME, &pdev->dev,
++				&rtc7301_rtc_ops, THIS_MODULE);
++	if (IS_ERR(rtc)) {
++		iounmap(rtc7301_base);
++		return PTR_ERR(rtc);
++	}
++
++	platform_set_drvdata(pdev, rtc);
++
++	rtc7301_init_settings();
++	return 0;
++}
++
++static int rtc7301_remove(struct platform_device *pdev)
++{
++	struct rtc_device *rtc = platform_get_drvdata(pdev);
++
++	if (rtc)
++		rtc_device_unregister(rtc);
++	if (rtc7301_base)
++		iounmap(rtc7301_base);
++	return 0;
++}
++
++static struct platform_driver rtc7301_driver = {
++	.driver = {
++		.name	= RTC_NAME,
++		.owner	= THIS_MODULE,
++	},
++	.probe	= rtc7301_probe,
++	.remove = rtc7301_remove,
++};
++
++static __init int rtc7301_init(void)
++{
++	return platform_driver_register(&rtc7301_driver);
++}
++module_init(rtc7301_init);
++
++static __exit void rtc7301_exit(void)
++{
++	platform_driver_unregister(&rtc7301_driver);
++}
++module_exit(rtc7301_exit);
++
++MODULE_DESCRIPTION("Epson 7301 RTC driver");
++MODULE_AUTHOR("Jose Vasconcellos <jvasco@verizon.net>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("platform:" RTC_NAME);
++MODULE_VERSION(RTC_VERSION);