kernel: bump 4.9 to 4.9.67

Refresh patches.
Remove upstreamed patches:
- generic/190-1-5-e1000e-Fix-error-path-in-link-detection.patch
- generic/190-3-5-e1000e-Fix-return-value-test.patch
- generic/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch
- generic/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch
- ramips/0102-MIPS-ralink-Fix-MT7628-pinmux.patch
- ramips/0103-MIPS-ralink-Fix-typo-in-mt7628-pinmux-function
Update patches that no longer apply:
- layerscape/815-spi-support-layerscape.patch
- ramips/0099-pci-mt7620.patch

Compile-tested on ar71xx, brcm2708/bcm2708, octeon and x86/64.
Runtime-tested on ar71xx, brcm2708/bcm2708, octeon and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 0 insertions, 52 deletions

diff --git a/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch b/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch
deleted file mode 100644
index 8ed91db..0000000
--- a/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From patchwork Fri Jul 21 18:36:23 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [1/5] e1000e: Fix error path in link detection
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 9857487
-Message-Id: <20170721183627.13373-1-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>,
- intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
- linux-kernel@vger.kernel.org
-Date: Fri, 21 Jul 2017 11:36:23 -0700
-
-In case of error from e1e_rphy(), the loop will exit early and "success"
-will be set to true erroneously.
-
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/phy.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
---- a/drivers/net/ethernet/intel/e1000e/phy.c
-+++ b/drivers/net/ethernet/intel/e1000e/phy.c
-@@ -1744,6 +1744,7 @@ s32 e1000e_phy_has_link_generic(struct e
- 	s32 ret_val = 0;
- 	u16 i, phy_status;
- 
-+	*success = false;
- 	for (i = 0; i < iterations; i++) {
- 		/* Some PHYs require the MII_BMSR register to be read
- 		 * twice due to the link bit being sticky.  No harm doing
-@@ -1763,16 +1764,16 @@ s32 e1000e_phy_has_link_generic(struct e
- 		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
- 		if (ret_val)
- 			break;
--		if (phy_status & BMSR_LSTATUS)
-+		if (phy_status & BMSR_LSTATUS) {
-+			*success = true;
- 			break;
-+		}
- 		if (usec_interval >= 1000)
- 			msleep(usec_interval / 1000);
- 		else
- 			udelay(usec_interval);
- 	}
- 
--	*success = (i < iterations);
--
- 	return ret_val;
- }
-