kernel: bump 4.9 to 4.9.67

Refresh patches.
Remove upstreamed patches:
- generic/190-1-5-e1000e-Fix-error-path-in-link-detection.patch
- generic/190-3-5-e1000e-Fix-return-value-test.patch
- generic/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch
- generic/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch
- ramips/0102-MIPS-ralink-Fix-MT7628-pinmux.patch
- ramips/0103-MIPS-ralink-Fix-typo-in-mt7628-pinmux-function
Update patches that no longer apply:
- layerscape/815-spi-support-layerscape.patch
- ramips/0099-pci-mt7620.patch

Compile-tested on ar71xx, brcm2708/bcm2708, octeon and x86/64.
Runtime-tested on ar71xx, brcm2708/bcm2708, octeon and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

1 files changed, 0 insertions, 109 deletions

diff --git a/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch b/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch
deleted file mode 100644
index b42fed2..0000000
--- a/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch
+++ /dev/null
@@ -1,109 +0,0 @@
-From patchwork Fri Jul 21 18:36:27 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [5/5] e1000e: Avoid receiver overrun interrupt bursts
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 9857493
-Message-Id: <20170721183627.13373-5-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>,
- intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
- linux-kernel@vger.kernel.org
-Date: Fri, 21 Jul 2017 11:36:27 -0700
-
-When e1000e_poll() is not fast enough to keep up with incoming traffic, the
-adapter (when operating in msix mode) raises the Other interrupt to signal
-Receiver Overrun.
-
-This is a double problem because 1) at the moment e1000_msix_other()
-assumes that it is only called in case of Link Status Change and 2) if the
-condition persists, the interrupt is repeatedly raised again in quick
-succession.
-
-Ideally we would configure the Other interrupt to not be raised in case of
-receiver overrun but this doesn't seem possible on this adapter. Instead,
-we handle the first part of the problem by reverting to the practice of
-reading ICR in the other interrupt handler, like before commit 16ecba59bc33
-("e1000e: Do not read ICR in Other interrupt"). Thanks to commit
-0a8047ac68e5 ("e1000e: Fix msi-x interrupt automask") which cleared IAME
-from CTRL_EXT, reading ICR doesn't interfere with RxQ0, TxQ0 interrupts
-anymore. We handle the second part of the problem by not re-enabling the
-Other interrupt right away when there is overrun. Instead, we wait until
-traffic subsides, napi polling mode is exited and interrupts are
-re-enabled.
-
-Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Fixes: 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt")
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/defines.h |  1 +
- drivers/net/ethernet/intel/e1000e/netdev.c  | 33 +++++++++++++++++++++++------
- 2 files changed, 27 insertions(+), 7 deletions(-)
-
---- a/drivers/net/ethernet/intel/e1000e/defines.h
-+++ b/drivers/net/ethernet/intel/e1000e/defines.h
-@@ -398,6 +398,7 @@
- #define E1000_ICR_LSC           0x00000004 /* Link Status Change */
- #define E1000_ICR_RXSEQ         0x00000008 /* Rx sequence error */
- #define E1000_ICR_RXDMT0        0x00000010 /* Rx desc min. threshold (0) */
-+#define E1000_ICR_RXO           0x00000040 /* Receiver Overrun */
- #define E1000_ICR_RXT0          0x00000080 /* Rx timer intr (ring 0) */
- #define E1000_ICR_ECCER         0x00400000 /* Uncorrectable ECC Error */
- /* If this bit asserted, the driver should claim the interrupt */
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -1905,12 +1905,30 @@ static irqreturn_t e1000_msix_other(int
- 	struct net_device *netdev = data;
- 	struct e1000_adapter *adapter = netdev_priv(netdev);
- 	struct e1000_hw *hw = &adapter->hw;
-+	u32 icr;
-+	bool enable = true;
- 
--	hw->mac.get_link_status = true;
-+	icr = er32(ICR);
-+	if (icr & E1000_ICR_RXO) {
-+		ew32(ICR, E1000_ICR_RXO);
-+		enable = false;
-+		/* napi poll will re-enable Other, make sure it runs */
-+		if (napi_schedule_prep(&adapter->napi)) {
-+			adapter->total_rx_bytes = 0;
-+			adapter->total_rx_packets = 0;
-+			__napi_schedule(&adapter->napi);
-+		}
-+	}
-+	if (icr & E1000_ICR_LSC) {
-+		ew32(ICR, E1000_ICR_LSC);
-+		hw->mac.get_link_status = true;
-+		/* guard against interrupt when we're going down */
-+		if (!test_bit(__E1000_DOWN, &adapter->state)) {
-+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
-+		}
-+	}
- 
--	/* guard against interrupt when we're going down */
--	if (!test_bit(__E1000_DOWN, &adapter->state)) {
--		mod_timer(&adapter->watchdog_timer, jiffies + 1);
-+	if (enable && !test_bit(__E1000_DOWN, &adapter->state)) {
- 		ew32(IMS, E1000_IMS_OTHER);
- 	}
- 
-@@ -2683,7 +2701,8 @@ static int e1000e_poll(struct napi_struc
- 		napi_complete_done(napi, work_done);
- 		if (!test_bit(__E1000_DOWN, &adapter->state)) {
- 			if (adapter->msix_entries)
--				ew32(IMS, adapter->rx_ring->ims_val);
-+				ew32(IMS, adapter->rx_ring->ims_val |
-+				     E1000_IMS_OTHER);
- 			else
- 				e1000_irq_enable(adapter);
- 		}
-@@ -4178,7 +4197,7 @@ static void e1000e_trigger_lsc(struct e1
- 	struct e1000_hw *hw = &adapter->hw;
- 
- 	if (adapter->msix_entries)
--		ew32(ICS, E1000_ICS_OTHER);
-+		ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER);
- 	else
- 		ew32(ICS, E1000_ICS_LSC);
- }