generic: ar8216: add support for the AR8327 chip

SVN-Revision: 31011

3 files changed, 536 insertions, 2 deletions

diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
index b5c13b0..93d3007 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -2,6 +2,7 @@
  * ar8216.c: AR8216 switch driver
  *
  * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -30,6 +31,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/lockdep.h>
+#include <linux/ar8216_platform.h>
 #include "ar8216.h"
 
 /* size of the vlan table */
@@ -70,6 +72,7 @@ struct ar8216_priv {
 	char buf[80];
 
 	bool init;
+	bool mii_lo_first;
 
 	/* all fields below are cleared on reset */
 	bool vlan;
@@ -137,8 +140,13 @@ ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
 
 	bus->write(bus, 0x18, 0, r3);
 	usleep_range(1000, 2000); /* wait for the page switch to propagate */
-	bus->write(bus, 0x10 | r2, r1 + 1, hi);
-	bus->write(bus, 0x10 | r2, r1, lo);
+	if (priv->mii_lo_first) {
+		bus->write(bus, 0x10 | r2, r1, lo);
+		bus->write(bus, 0x10 | r2, r1 + 1, hi);
+	} else {
+		bus->write(bus, 0x10 | r2, r1 + 1, hi);
+		bus->write(bus, 0x10 | r2, r1, lo);
+	}
 
 	mutex_unlock(&bus->mdio_lock);
 }
@@ -609,6 +617,309 @@ static const struct ar8xxx_chip ar8316_chip = {
 	.vtu_load_vlan = ar8216_vtu_load_vlan,
 };
 
+static u32
+ar8327_get_pad_cfg(struct ar8327_pad_cfg *cfg)
+{
+	u32 t;
+
+	if (!cfg)
+		return 0;
+
+	t = 0;
+	switch (cfg->mode) {
+	case AR8327_PAD_NC:
+		break;
+
+	case AR8327_PAD_MAC2MAC_MII:
+		t = AR8327_PAD_MAC_MII_EN;
+		if (cfg->rxclk_sel)
+			t |= AR8327_PAD_MAC_MII_RXCLK_SEL;
+		if (cfg->txclk_sel)
+			t |= AR8327_PAD_MAC_MII_TXCLK_SEL;
+		break;
+
+	case AR8327_PAD_MAC2MAC_GMII:
+		t = AR8327_PAD_MAC_GMII_EN;
+		if (cfg->rxclk_sel)
+			t |= AR8327_PAD_MAC_GMII_RXCLK_SEL;
+		if (cfg->txclk_sel)
+			t |= AR8327_PAD_MAC_GMII_TXCLK_SEL;
+		break;
+
+	case AR8327_PAD_MAC_SGMII:
+		t = AR8327_PAD_SGMII_EN;
+		break;
+
+	case AR8327_PAD_MAC2PHY_MII:
+		t = AR8327_PAD_PHY_MII_EN;
+		if (cfg->rxclk_sel)
+			t |= AR8327_PAD_PHY_MII_RXCLK_SEL;
+		if (cfg->txclk_sel)
+			t |= AR8327_PAD_PHY_MII_TXCLK_SEL;
+		break;
+
+	case AR8327_PAD_MAC2PHY_GMII:
+		t = AR8327_PAD_PHY_GMII_EN;
+		if (cfg->pipe_rxclk_sel)
+			t |= AR8327_PAD_PHY_GMII_PIPE_RXCLK_SEL;
+		if (cfg->rxclk_sel)
+			t |= AR8327_PAD_PHY_GMII_RXCLK_SEL;
+		if (cfg->txclk_sel)
+			t |= AR8327_PAD_PHY_GMII_TXCLK_SEL;
+		break;
+
+	case AR8327_PAD_MAC_RGMII:
+		t = AR8327_PAD_RGMII_EN;
+		t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
+		t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
+		if (cfg->rxclk_delay_en)
+			t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
+		if (cfg->txclk_delay_en)
+			t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;
+		break;
+
+	case AR8327_PAD_PHY_GMII:
+		t = AR8327_PAD_PHYX_GMII_EN;
+		break;
+
+	case AR8327_PAD_PHY_RGMII:
+		t = AR8327_PAD_PHYX_RGMII_EN;
+		break;
+
+	case AR8327_PAD_PHY_MII:
+		t = AR8327_PAD_PHYX_MII_EN;
+		break;
+	}
+
+	return t;
+}
+
+static int
+ar8327_hw_init(struct ar8216_priv *priv)
+{
+	struct ar8327_platform_data *pdata;
+	u32 t;
+	int i;
+
+	pdata = priv->phy->dev.platform_data;
+	if (!pdata)
+		return -EINVAL;
+
+	t = ar8327_get_pad_cfg(pdata->pad0_cfg);
+	priv->write(priv, AR8327_REG_PAD0_MODE, t);
+	t = ar8327_get_pad_cfg(pdata->pad5_cfg);
+	priv->write(priv, AR8327_REG_PAD5_MODE, t);
+	t = ar8327_get_pad_cfg(pdata->pad6_cfg);
+	priv->write(priv, AR8327_REG_PAD6_MODE, t);
+
+	priv->write(priv, AR8327_REG_POWER_ON_STRIP, 0x40000000);
+
+	/* fixup PHYs */
+	for (i = 0; i < AR8327_NUM_PHYS; i++) {
+		/* For 100M waveform */
+		ar8216_phy_dbg_write(priv, i, 0, 0x02ea);
+
+		/* Turn on Gigabit clock */
+		ar8216_phy_dbg_write(priv, i, 0x3d, 0x68a0);
+	}
+
+	return 0;
+}
+
+static void
+ar8327_init_globals(struct ar8216_priv *priv)
+{
+	u32 t;
+
+	/* enable CPU port and disable mirror port */
+	t = AR8327_FWD_CTRL0_CPU_PORT_EN |
+	    AR8327_FWD_CTRL0_MIRROR_PORT;
+	priv->write(priv, AR8327_REG_FWD_CTRL0, t);
+
+	/* forward multicast and broadcast frames to CPU */
+	t = (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_UC_FLOOD_S) |
+	    (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_BC_FLOOD_S);
+	priv->write(priv, AR8327_REG_FWD_CTRL1, t);
+
+	/* setup MTU */
+	ar8216_rmw(priv, AR8327_REG_MAX_FRAME_SIZE,
+		   AR8327_MAX_FRAME_SIZE_MTU, 1518 + 8 + 2);
+}
+
+static void
+ar8327_init_cpuport(struct ar8216_priv *priv)
+{
+	struct ar8327_platform_data *pdata;
+	struct ar8327_port_cfg *cfg;
+	u32 t;
+
+	pdata = priv->phy->dev.platform_data;
+	if (!pdata)
+		return;
+
+	cfg = &pdata->cpuport_cfg;
+	if (!cfg->force_link) {
+		priv->write(priv, AR8327_REG_PORT_STATUS(AR8216_PORT_CPU),
+			    AR8216_PORT_STATUS_LINK_AUTO);
+		return;
+	}
+
+	t = AR8216_PORT_STATUS_TXMAC | AR8216_PORT_STATUS_RXMAC;
+	t |= cfg->duplex ? AR8216_PORT_STATUS_DUPLEX : 0;
+	t |= cfg->rxpause ? AR8216_PORT_STATUS_RXFLOW : 0;
+	t |= cfg->txpause ? AR8216_PORT_STATUS_TXFLOW : 0;
+	switch (cfg->speed) {
+	case AR8327_PORT_SPEED_10:
+		t |= AR8216_PORT_SPEED_10M;
+		break;
+	case AR8327_PORT_SPEED_100:
+		t |= AR8216_PORT_SPEED_100M;
+		break;
+	case AR8327_PORT_SPEED_1000:
+		t |= AR8216_PORT_SPEED_1000M;
+		break;
+	}
+
+	priv->write(priv, AR8327_REG_PORT_STATUS(AR8216_PORT_CPU), t);
+}
+
+static void
+ar8327_init_port(struct ar8216_priv *priv, int port)
+{
+	u32 t;
+
+	if (port == AR8216_PORT_CPU) {
+		ar8327_init_cpuport(priv);
+	} else {
+		t = AR8216_PORT_STATUS_LINK_AUTO;
+		priv->write(priv, AR8327_REG_PORT_STATUS(port), t);
+	}
+
+	priv->write(priv, AR8327_REG_PORT_HEADER(port), 0);
+
+	priv->write(priv, AR8327_REG_PORT_VLAN0(port), 0);
+
+	t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S;
+	priv->write(priv, AR8327_REG_PORT_VLAN1(port), t);
+
+	t = AR8327_PORT_LOOKUP_LEARN;
+	t |= AR8216_PORT_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
+	priv->write(priv, AR8327_REG_PORT_LOOKUP(port), t);
+}
+
+static u32
+ar8327_read_port_status(struct ar8216_priv *priv, int port)
+{
+	return priv->read(priv, AR8327_REG_PORT_STATUS(port));
+}
+
+static int
+ar8327_atu_flush(struct ar8216_priv *priv)
+{
+	int ret;
+
+	ret = ar8216_wait_bit(priv, AR8327_REG_ATU_FUNC,
+			      AR8327_ATU_FUNC_BUSY, 0);
+	if (!ret)
+		priv->write(priv, AR8327_REG_ATU_FUNC,
+			    AR8327_ATU_FUNC_OP_FLUSH);
+
+	return ret;
+}
+
+static void
+ar8327_vtu_op(struct ar8216_priv *priv, u32 op, u32 val)
+{
+	if (ar8216_wait_bit(priv, AR8327_REG_VTU_FUNC1,
+			    AR8327_VTU_FUNC1_BUSY, 0))
+		return;
+
+	if ((op & AR8327_VTU_FUNC1_OP) == AR8327_VTU_FUNC1_OP_LOAD)
+		priv->write(priv, AR8327_REG_VTU_FUNC0, val);
+
+	op |= AR8327_VTU_FUNC1_BUSY;
+	priv->write(priv, AR8327_REG_VTU_FUNC1, op);
+}
+
+static void
+ar8327_vtu_flush(struct ar8216_priv *priv)
+{
+	ar8327_vtu_op(priv, AR8327_VTU_FUNC1_OP_FLUSH, 0);
+}
+
+static void
+ar8327_vtu_load_vlan(struct ar8216_priv *priv, u32 vid, u32 port_mask)
+{
+	u32 op;
+	u32 val;
+	int i;
+
+	op = AR8327_VTU_FUNC1_OP_LOAD | (vid << AR8327_VTU_FUNC1_VID_S);
+	val = AR8327_VTU_FUNC0_VALID | AR8327_VTU_FUNC0_IVL;
+	for (i = 0; i < AR8327_NUM_PORTS; i++) {
+		u32 mode;
+
+		if ((port_mask & BIT(i)) == 0)
+			mode = AR8327_VTU_FUNC0_EG_MODE_NOT;
+		else if (priv->vlan == 0)
+			mode = AR8327_VTU_FUNC0_EG_MODE_KEEP;
+		else if (priv->vlan_tagged & BIT(i))
+			mode = AR8327_VTU_FUNC0_EG_MODE_TAG;
+		else
+			mode = AR8327_VTU_FUNC0_EG_MODE_UNTAG;
+
+		val |= mode << AR8327_VTU_FUNC0_EG_MODE_S(i);
+	}
+	ar8327_vtu_op(priv, op, val);
+}
+
+static void
+ar8327_setup_port(struct ar8216_priv *priv, int port, u32 egress, u32 ingress,
+		  u32 members, u32 pvid)
+{
+	u32 t;
+	u32 mode;
+
+	t = pvid << AR8327_PORT_VLAN0_DEF_SVID_S;
+	t |= pvid << AR8327_PORT_VLAN0_DEF_CVID_S;
+	priv->write(priv, AR8327_REG_PORT_VLAN0(port), t);
+
+	mode = AR8327_PORT_VLAN1_OUT_MODE_UNMOD;
+	switch (egress) {
+	case AR8216_OUT_KEEP:
+		mode = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH;
+		break;
+	case AR8216_OUT_STRIP_VLAN:
+		mode = AR8327_PORT_VLAN1_OUT_MODE_UNTAG;
+		break;
+	case AR8216_OUT_ADD_VLAN:
+		mode = AR8327_PORT_VLAN1_OUT_MODE_TAG;
+		break;
+	}
+
+	t = AR8327_PORT_VLAN1_PORT_VLAN_PROP;
+	t |= mode << AR8327_PORT_VLAN1_OUT_MODE_S;
+	priv->write(priv, AR8327_REG_PORT_VLAN1(port), t);
+
+	t = members;
+	t |= AR8327_PORT_LOOKUP_LEARN;
+	t |= ingress << AR8327_PORT_LOOKUP_IN_MODE_S;
+	t |= AR8216_PORT_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
+	priv->write(priv, AR8327_REG_PORT_LOOKUP(port), t);
+}
+
+static const struct ar8xxx_chip ar8327_chip = {
+	.caps = AR8XXX_CAP_GIGE,
+	.hw_init = ar8327_hw_init,
+	.init_globals = ar8327_init_globals,
+	.init_port = ar8327_init_port,
+	.setup_port = ar8327_setup_port,
+	.read_port_status = ar8327_read_port_status,
+	.atu_flush = ar8327_atu_flush,
+	.vtu_flush = ar8327_vtu_flush,
+	.vtu_load_vlan = ar8327_vtu_load_vlan,
+};
+
 static int
 ar8216_sw_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
 		   struct switch_val *val)
@@ -910,6 +1221,11 @@ ar8216_id_chip(struct ar8216_priv *priv)
 		priv->chip_type = AR8316;
 		priv->chip = &ar8316_chip;
 		break;
+	case 0x1202:
+		priv->chip_type = AR8327;
+		priv->mii_lo_first = true;
+		priv->chip = &ar8327_chip;
+		break;
 	default:
 		printk(KERN_DEBUG
 			"ar8216: Unknown Atheros device [ver=%d, rev=%d, phy_id=%04x%04x]\n",
@@ -1012,6 +1328,10 @@ ar8216_config_init(struct phy_device *pdev)
 		swdev->name = "Atheros AR8236";
 		swdev->vlans = AR8216_NUM_VLANS;
 		swdev->ports = AR8216_NUM_PORTS;
+	} else if (priv->chip_type == AR8327) {
+		swdev->name = "Atheros AR8327";
+		swdev->vlans = AR8X16_MAX_VLANS;
+		swdev->ports = AR8327_NUM_PORTS;
 	} else {
 		swdev->name = "Atheros AR8216";
 		swdev->vlans = AR8216_NUM_VLANS;
diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.h b/target/linux/generic/files/drivers/net/phy/ar8216.h
index 886730c..49a6296 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8216.h
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.h
@@ -161,6 +161,147 @@
 #define   AR8236_PORT_VLAN2_VLAN_MODE	BITS(30, 2)
 #define   AR8236_PORT_VLAN2_VLAN_MODE_S	30
 
+#define AR8327_NUM_PORTS	7
+#define AR8327_NUM_PHYS		5
+#define AR8327_PORTS_ALL	0x7f
+
+#define AR8327_REG_MASK				0x000
+
+#define AR8327_REG_PAD0_MODE			0x004
+#define AR8327_REG_PAD5_MODE			0x008
+#define AR8327_REG_PAD6_MODE			0x00c
+#define   AR8327_PAD_MAC_MII_RXCLK_SEL		BIT(0)
+#define   AR8327_PAD_MAC_MII_TXCLK_SEL		BIT(1)
+#define   AR8327_PAD_MAC_MII_EN			BIT(2)
+#define   AR8327_PAD_MAC_GMII_RXCLK_SEL		BIT(4)
+#define   AR8327_PAD_MAC_GMII_TXCLK_SEL		BIT(5)
+#define   AR8327_PAD_MAC_GMII_EN		BIT(6)
+#define   AR8327_PAD_SGMII_EN			BIT(7)
+#define   AR8327_PAD_PHY_MII_RXCLK_SEL		BIT(8)
+#define   AR8327_PAD_PHY_MII_TXCLK_SEL		BIT(9)
+#define   AR8327_PAD_PHY_MII_EN			BIT(10)
+#define   AR8327_PAD_PHY_GMII_PIPE_RXCLK_SEL	BIT(11)
+#define   AR8327_PAD_PHY_GMII_RXCLK_SEL		BIT(12)
+#define   AR8327_PAD_PHY_GMII_TXCLK_SEL		BIT(13)
+#define   AR8327_PAD_PHY_GMII_EN		BIT(14)
+#define   AR8327_PAD_PHYX_GMII_EN		BIT(16)
+#define   AR8327_PAD_PHYX_RGMII_EN		BIT(17)
+#define   AR8327_PAD_PHYX_MII_EN		BIT(18)
+#define   AR8327_PAD_RGMII_RXCLK_DELAY_SEL	BITS(20, 2)
+#define   AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S	20
+#define   AR8327_PAD_RGMII_TXCLK_DELAY_SEL	BITS(22, 2)
+#define   AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S	22
+#define   AR8327_PAD_RGMII_RXCLK_DELAY_EN	BIT(24)
+#define   AR8327_PAD_RGMII_TXCLK_DELAY_EN	BIT(25)
+#define   AR8327_PAD_RGMII_EN			BIT(26)
+
+#define AR8327_REG_POWER_ON_STRIP		0x010
+
+#define AR8327_REG_INT_STATUS0			0x020
+#define   AR8327_INT0_VT_DONE			BIT(20)
+
+#define AR8327_REG_INT_STATUS1			0x024
+#define AR8327_REG_INT_MASK0			0x028
+#define AR8327_REG_INT_MASK1			0x02c
+#define AR8327_REG_SERVICE_TAG			0x048
+#define AR8327_REG_LED_CTRL0			0x050
+#define AR8327_REG_LED_CTRL1			0x054
+#define AR8327_REG_LED_CTRL2			0x058
+#define AR8327_REG_LED_CTRL3			0x05c
+#define AR8327_REG_MAC_ADDR0			0x060
+#define AR8327_REG_MAC_ADDR1			0x064
+
+#define AR8327_REG_MAX_FRAME_SIZE		0x078
+#define   AR8327_MAX_FRAME_SIZE_MTU		BITS(0, 14)
+
+#define AR8327_REG_PORT_STATUS(_i)		(0x07c + (_i) * 4)
+
+#define AR8327_REG_HEADER_CTRL			0x098
+#define AR8327_REG_PORT_HEADER(_i)		(0x09c + (_i) * 4)
+
+#define AR8327_REG_PORT_VLAN0(_i)		(0x420 + (_i) * 0x8)
+#define   AR8327_PORT_VLAN0_DEF_SVID		BITS(0, 12)
+#define   AR8327_PORT_VLAN0_DEF_SVID_S		0
+#define   AR8327_PORT_VLAN0_DEF_CVID		BITS(16, 12)
+#define   AR8327_PORT_VLAN0_DEF_CVID_S		16
+
+#define AR8327_REG_PORT_VLAN1(_i)		(0x424 + (_i) * 0x8)
+#define   AR8327_PORT_VLAN1_PORT_VLAN_PROP	BIT(6)
+#define   AR8327_PORT_VLAN1_OUT_MODE		BITS(12, 2)
+#define   AR8327_PORT_VLAN1_OUT_MODE_S		12
+#define   AR8327_PORT_VLAN1_OUT_MODE_UNMOD	0
+#define   AR8327_PORT_VLAN1_OUT_MODE_UNTAG	1
+#define   AR8327_PORT_VLAN1_OUT_MODE_TAG	2
+#define   AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH	3
+
+#define AR8327_REG_ATU_DATA0			0x600
+#define AR8327_REG_ATU_DATA1			0x604
+#define AR8327_REG_ATU_DATA2			0x608
+
+#define AR8327_REG_ATU_FUNC			0x60c
+#define   AR8327_ATU_FUNC_OP			BITS(0, 4)
+#define   AR8327_ATU_FUNC_OP_NOOP		0x0
+#define   AR8327_ATU_FUNC_OP_FLUSH		0x1
+#define   AR8327_ATU_FUNC_OP_LOAD		0x2
+#define   AR8327_ATU_FUNC_OP_PURGE		0x3
+#define   AR8327_ATU_FUNC_OP_FLUSH_LOCKED	0x4
+#define   AR8327_ATU_FUNC_OP_FLUSH_UNICAST	0x5
+#define   AR8327_ATU_FUNC_OP_GET_NEXT		0x6
+#define   AR8327_ATU_FUNC_OP_SEARCH_MAC		0x7
+#define   AR8327_ATU_FUNC_OP_CHANGE_TRUNK	0x8
+#define   AR8327_ATU_FUNC_BUSY			BIT(31)
+
+#define AR8327_REG_VTU_FUNC0			0x0610
+#define   AR8327_VTU_FUNC0_EG_MODE		BITS(4, 14)
+#define   AR8327_VTU_FUNC0_EG_MODE_S(_i)	(4 + (_i) * 2)
+#define   AR8327_VTU_FUNC0_EG_MODE_KEEP		0
+#define   AR8327_VTU_FUNC0_EG_MODE_UNTAG	1
+#define   AR8327_VTU_FUNC0_EG_MODE_TAG		2
+#define   AR8327_VTU_FUNC0_EG_MODE_NOT		3
+#define   AR8327_VTU_FUNC0_IVL			BIT(19)
+#define   AR8327_VTU_FUNC0_VALID		BIT(20)
+
+#define AR8327_REG_VTU_FUNC1			0x0614
+#define   AR8327_VTU_FUNC1_OP			BITS(0, 3)
+#define   AR8327_VTU_FUNC1_OP_NOOP		0
+#define   AR8327_VTU_FUNC1_OP_FLUSH		1
+#define   AR8327_VTU_FUNC1_OP_LOAD		2
+#define   AR8327_VTU_FUNC1_OP_PURGE		3
+#define   AR8327_VTU_FUNC1_OP_REMOVE_PORT	4
+#define   AR8327_VTU_FUNC1_OP_GET_NEXT		5
+#define   AR8327_VTU_FUNC1_OP_GET_ONE		6
+#define   AR8327_VTU_FUNC1_FULL			BIT(4)
+#define   AR8327_VTU_FUNC1_PORT			BIT(8, 4)
+#define   AR8327_VTU_FUNC1_PORT_S		8
+#define   AR8327_VTU_FUNC1_VID			BIT(16, 12)
+#define   AR8327_VTU_FUNC1_VID_S		16
+#define   AR8327_VTU_FUNC1_BUSY			BIT(31)
+
+#define AR8327_REG_FWD_CTRL0			0x620
+#define   AR8327_FWD_CTRL0_CPU_PORT_EN		BIT(10)
+#define   AR8327_FWD_CTRL0_MIRROR_PORT		BITS(4, 4)
+#define   AR8327_FWD_CTRL0_MIRROR_PORT_S	4
+
+#define AR8327_REG_FWD_CTRL1			0x624
+#define   AR8327_FWD_CTRL1_UC_FLOOD		BITS(0, 7)
+#define   AR8327_FWD_CTRL1_UC_FLOOD_S		0
+#define   AR8327_FWD_CTRL1_MC_FLOOD		BITS(8, 7)
+#define   AR8327_FWD_CTRL1_MC_FLOOD_S		8
+#define   AR8327_FWD_CTRL1_BC_FLOOD		BITS(16, 7)
+#define   AR8327_FWD_CTRL1_BC_FLOOD_S		16
+#define   AR8327_FWD_CTRL1_IGMP			BITS(24, 7)
+#define   AR8327_FWD_CTRL1_IGMP_S		24
+
+#define AR8327_REG_PORT_LOOKUP(_i)		(0x660 + (_i) * 0xc)
+#define   AR8327_PORT_LOOKUP_MEMBER		BITS(0, 7)
+#define   AR8327_PORT_LOOKUP_IN_MODE		BITS(8, 2)
+#define   AR8327_PORT_LOOKUP_IN_MODE_S		8
+#define   AR8327_PORT_LOOKUP_STATE		BITS(16, 3)
+#define   AR8327_PORT_LOOKUP_STATE_S		16
+#define   AR8327_PORT_LOOKUP_LEARN		BIT(20)
+
+#define AR8327_REG_PORT_PRIO(_i)		(0x664 + (_i) * 0xc)
+
 /* port speed */
 enum {
         AR8216_PORT_SPEED_10M = 0,
@@ -199,6 +340,7 @@ enum {
   AR8216 = 8216,
   AR8236 = 8236,
   AR8316 = 8316,
+  AR8327 = 8327,
 };
 
 #endif
diff --git a/target/linux/generic/files/include/linux/ar8216_platform.h b/target/linux/generic/files/include/linux/ar8216_platform.h
new file mode 100644
index 0000000..1ecb6e5
--- /dev/null
+++ b/target/linux/generic/files/include/linux/ar8216_platform.h
@@ -0,0 +1,72 @@
+/*
+ * AR8216 switch driver platform data
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef AR8216_PLATFORM_H
+#define AR8216_PLATFORM_H
+
+enum ar8327_pad_mode {
+	AR8327_PAD_NC = 0,
+	AR8327_PAD_MAC2MAC_MII,
+	AR8327_PAD_MAC2MAC_GMII,
+	AR8327_PAD_MAC_SGMII,
+	AR8327_PAD_MAC2PHY_MII,
+	AR8327_PAD_MAC2PHY_GMII,
+	AR8327_PAD_MAC_RGMII,
+	AR8327_PAD_PHY_GMII,
+	AR8327_PAD_PHY_RGMII,
+	AR8327_PAD_PHY_MII,
+};
+
+enum ar8327_clk_delay_sel {
+	AR8327_CLK_DELAY_SEL0 = 0,
+	AR8327_CLK_DELAY_SEL1,
+	AR8327_CLK_DELAY_SEL2,
+	AR8327_CLK_DELAY_SEL3,
+};
+
+struct ar8327_pad_cfg {
+	enum ar8327_pad_mode mode;
+	bool rxclk_sel;
+	bool txclk_sel;
+	bool pipe_rxclk_sel;
+	bool txclk_delay_en;
+	bool rxclk_delay_en;
+	enum ar8327_clk_delay_sel txclk_delay_sel;
+	enum ar8327_clk_delay_sel rxclk_delay_sel;
+};
+
+enum ar8327_port_speed {
+	AR8327_PORT_SPEED_10 = 0,
+	AR8327_PORT_SPEED_100,
+	AR8327_PORT_SPEED_1000,
+};
+
+struct ar8327_port_cfg {
+	int force_link:1;
+	enum ar8327_port_speed speed;
+	int txpause:1;
+	int rxpause:1;
+	int duplex:1;
+};
+
+struct ar8327_platform_data {
+	struct ar8327_pad_cfg *pad0_cfg;
+	struct ar8327_pad_cfg *pad5_cfg;
+	struct ar8327_pad_cfg *pad6_cfg;
+	struct ar8327_port_cfg cpuport_cfg;
+};
+
+#endif /* AR8216_PLATFORM_H */
\ No newline at end of file