imx6: add GW553x support

The Gateworks Ventana GW553x is a single-board computer based on the NXP
IMX6 SoC with the following features:
 * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q)
 * small form factor (35x70mm)
 * 512MB DDR3 DRAM (2x32bit) (options up to 2GB)
 * 256MB NAND flash (4GB option)
 * Gateworks System Controller:
  - hardware watchdog
  - hardware monitor
  - pushbutton controller
  - EEPROM storage
  - power control
 * JTAG programmable
 * 1x miniPCI socket (with PCIe, USB, SIM)
 * 1x microSD socket
 * 1x SIM socket
 * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag)
 * analog CVBS video in
 * GPS (optional uBlox EVA-M8M)
 * Application headers:
  - 2x TTL UART (TX/RX)
  - 4x TTL GPIO (3x configurable as PWM)
  - 3x CVBS Analog video input (1x decoder with 3x selectable inputs)
 * Front panel connectors:
  * micro-HDMI audio/video out
  - 1x user programmable LED
  - 1x configurable user pushbutton
  - 1x USB OTG

See http://www.gateworks.com for more info

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

3 files changed, 585 insertions, 0 deletions

diff --git a/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6dl-gw553x.dts b/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6dl-gw553x.dts
new file mode 100644
index 0000000..54b7f9f
--- /dev/null
+++ b/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6dl-gw553x.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2015 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
+	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6q-gw553x.dts b/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6q-gw553x.dts
new file mode 100644
index 0000000..e4a3d1d
--- /dev/null
+++ b/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6q-gw553x.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2015 Gateworks Corporation
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
+	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
new file mode 100644
index 0000000..01f9afb
--- /dev/null
+++ b/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -0,0 +1,547 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: user2 {
+			label = "user2";
+			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <256>;
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p3v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3P0V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5p0v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "5P0V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		/* GSC watchdog */
+		watchdog {
+			compatible = "gw,gsc_wdt";
+			status = "okay";
+		};
+
+		/* Linux input events from GSC interrupt events */
+		input {
+			compatible = "gw,gsc_input";
+			interrupt-parent = <&gsc>;
+			interrupts = <0 1 2 5 7>;
+			interrupt-names = "button", "key-erased", "eeprom-wp", "tamper", "button-held";
+			status = "okay";
+		};
+	};
+
+	gsc_gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	gsc_hwmon: hwmon@29 {
+		compatible = "gw,gsc_hwmon";
+		reg = <0x29>;
+	};
+
+	gsc_rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* LSM9DS1 magnetic sensor */
+	lsm9ds1-m@0x1c {
+		compatible = "st,lsm9ds1-mag";
+		reg = <0x1C>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu_mag>;
+		gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* IRQ */
+		rot-matrix = /bits/ 16 <(1) (0) (0)
+			(0) (1) (0)
+			(0) (0) (1)>;
+		poll-interval = <100>;
+		min-interval = <13>;
+		fs-range = <0>;
+	};
+
+	/* LSM9DS1 accelerometer/gyroscope sensor */
+	lsm9ds1-ag@0x6a {
+		compatible = "st,lsm9ds1-acc-gyr";
+		reg = <0x6A>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu_acc>;
+		gpios = <&gpio7 13 GPIO_ACTIVE_LOW>, /* INT1 */
+		        <&gpio4 5  GPIO_ACTIVE_LOW>; /* INT2 */
+		rot-matrix = /bits/ 16 <(1) (0) (0)
+			(0) (1) (0)
+			(0) (0) (1)>;
+		g-poll-interval = <100>;
+		g-min-interval = <2>;
+		g-fs-range = <0>;
+		x-poll-interval = <100>;
+		x-min-interval = <1>;
+		x-fs-range = <0>;
+		aa-filter-bw = <0>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	imx6qdl-gw553x {
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_gsc: gscgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04 		0x0001b0b0
+			 >;
+		};
+
+		pinctrl_hdmi: hdmigrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_imu_mag: gpioimxmaggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0 /* IRQ */
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0 /* data ready */
+			>;
+		};
+
+		pinctrl_imu_acc: gpioimxaccgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b0b0 /* INT1 */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b0b0 /* INT2 */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x4001b0b0 /* Data enable */
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+			>;
+		};
+
+		pinctrl_pps: ppsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+			>;
+		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+			>;
+		};
+	};
+};