imx6: backport ahci support

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 37936

4 files changed, 545 insertions, 0 deletions

diff --git a/target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch b/target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch
new file mode 100644
index 0000000..1adb41d
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch
@@ -0,0 +1,306 @@
+From 9e54eae23bc9cca0d8a955018c35b1250e09a73a Mon Sep 17 00:00:00 2001
+From: Richard Zhu <r65037@freescale.com>
+Date: Wed, 24 Jul 2013 14:15:29 +0800
+Subject: [PATCH] ahci_imx: add ahci sata support on imx platforms
+
+imx6q contains one Synopsys AHCI SATA controller, But it can't share
+ahci_platform driver with other controllers because there are some
+misalignments of the generic AHCI controller - the bits definitions of
+the HBA registers, the Vendor Specific registers, the AHCI PHY clock
+and the AHCI signals adjustment window(GPR13 register).
+
+ - CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0',
+   should be configured to be '1'
+
+ - bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL
+   should be set to be '1'.(default 0)
+
+ - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be
+   configured regarding to the frequency of AHB bus clock.
+
+ - Configurations of the AHCI PHY clock, and the signal parameters of
+   the GPR13
+
+Setup its own ahci sata driver, contained the imx6q specific
+initialized codes, re-use the generic ahci_platform driver, and keep
+the generic ahci_platform driver clean as much as possible.
+
+tj: patch description reformatted
+
+Signed-off-by: Richard Zhu <r65037@freescale.com>
+Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
+Signed-off-by: Tejun Heo <tj@kernel.org>
+---
+ drivers/ata/Kconfig    |   9 ++
+ drivers/ata/Makefile   |   1 +
+ drivers/ata/ahci_imx.c | 236 +++++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 246 insertions(+)
+ create mode 100644 drivers/ata/ahci_imx.c
+
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
+ 
+ 	  If unsure, say N.
+ 
++config AHCI_IMX
++	tristate "Freescale i.MX AHCI SATA support"
++	depends on SATA_AHCI_PLATFORM
++	help
++	  This option enables support for the Freescale i.MX SoC's
++	  onboard AHCI SATA.
++
++	  If unsure, say N.
++
+ config SATA_FSL
+ 	tristate "Freescale 3.0Gbps SATA support"
+ 	depends on FSL_SOC
+--- a/drivers/ata/Makefile
++++ b/drivers/ata/Makefile
+@@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X)	+= sata_inic
+ obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
+ obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
+ obj-$(CONFIG_SATA_HIGHBANK)	+= sata_highbank.o libahci.o
++obj-$(CONFIG_AHCI_IMX)		+= ahci_imx.o
+ 
+ # SFF w/ custom DMA
+ obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
+--- /dev/null
++++ b/drivers/ata/ahci_imx.c
+@@ -0,0 +1,236 @@
++/*
++ * Freescale IMX AHCI SATA platform driver
++ * Copyright 2013 Freescale Semiconductor, Inc.
++ *
++ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms and conditions of the GNU General Public License,
++ * version 2, as published by the Free Software Foundation.
++ *
++ * This program is distributed in the hope it will be useful, but WITHOUT
++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
++ * more details.
++ *
++ * You should have received a copy of the GNU General Public License along with
++ * this program. If not, see <http://www.gnu.org/licenses/>.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/regmap.h>
++#include <linux/ahci_platform.h>
++#include <linux/of_device.h>
++#include <linux/mfd/syscon.h>
++#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
++#include "ahci.h"
++
++enum {
++	HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
++};
++
++struct imx_ahci_priv {
++	struct platform_device *ahci_pdev;
++	struct clk *sata_ref_clk;
++	struct clk *ahb_clk;
++	struct regmap *gpr;
++};
++
++static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
++{
++	int ret = 0;
++	unsigned int reg_val;
++	struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
++
++	imxpriv->gpr =
++		syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
++	if (IS_ERR(imxpriv->gpr)) {
++		dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n");
++		return PTR_ERR(imxpriv->gpr);
++	}
++
++	ret = clk_prepare_enable(imxpriv->sata_ref_clk);
++	if (ret < 0) {
++		dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret);
++		return ret;
++	}
++
++	/*
++	 * set PHY Paremeters, two steps to configure the GPR13,
++	 * one write for rest of parameters, mask of first write
++	 * is 0x07fffffd, and the other one write for setting
++	 * the mpll_clk_en.
++	 */
++	regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
++			| IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK
++			| IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK
++			| IMX6Q_GPR13_SATA_SPD_MODE_MASK
++			| IMX6Q_GPR13_SATA_MPLL_SS_EN
++			| IMX6Q_GPR13_SATA_TX_ATTEN_MASK
++			| IMX6Q_GPR13_SATA_TX_BOOST_MASK
++			| IMX6Q_GPR13_SATA_TX_LVL_MASK
++			| IMX6Q_GPR13_SATA_TX_EDGE_RATE
++			, IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
++			| IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
++			| IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F
++			| IMX6Q_GPR13_SATA_SPD_MODE_3P0G
++			| IMX6Q_GPR13_SATA_MPLL_SS_EN
++			| IMX6Q_GPR13_SATA_TX_ATTEN_9_16
++			| IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB
++			| IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
++	regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
++			IMX6Q_GPR13_SATA_MPLL_CLK_EN);
++	usleep_range(100, 200);
++
++	/*
++	 * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
++	 * and IP vendor specific register HOST_TIMER1MS.
++	 * Configure CAP_SSS (support stagered spin up).
++	 * Implement the port0.
++	 * Get the ahb clock rate, and configure the TIMER1MS register.
++	 */
++	reg_val = readl(mmio + HOST_CAP);
++	if (!(reg_val & HOST_CAP_SSS)) {
++		reg_val |= HOST_CAP_SSS;
++		writel(reg_val, mmio + HOST_CAP);
++	}
++	reg_val = readl(mmio + HOST_PORTS_IMPL);
++	if (!(reg_val & 0x1)) {
++		reg_val |= 0x1;
++		writel(reg_val, mmio + HOST_PORTS_IMPL);
++	}
++
++	reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
++	writel(reg_val, mmio + HOST_TIMER1MS);
++
++	return 0;
++}
++
++static void imx6q_sata_exit(struct device *dev)
++{
++	struct imx_ahci_priv *imxpriv =  dev_get_drvdata(dev->parent);
++
++	regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
++			!IMX6Q_GPR13_SATA_MPLL_CLK_EN);
++	clk_disable_unprepare(imxpriv->sata_ref_clk);
++}
++
++static struct ahci_platform_data imx6q_sata_pdata = {
++	.init = imx6q_sata_init,
++	.exit = imx6q_sata_exit,
++};
++
++static const struct of_device_id imx_ahci_of_match[] = {
++	{ .compatible = "fsl,imx6q-ahci", .data = &imx6q_sata_pdata},
++	{},
++};
++MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
++
++static int imx_ahci_probe(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct resource *mem, *irq, res[2];
++	const struct of_device_id *of_id;
++	const struct ahci_platform_data *pdata = NULL;
++	struct imx_ahci_priv *imxpriv;
++	struct device *ahci_dev;
++	struct platform_device *ahci_pdev;
++	int ret;
++
++	imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
++	if (!imxpriv) {
++		dev_err(dev, "can't alloc ahci_host_priv\n");
++		return -ENOMEM;
++	}
++
++	ahci_pdev = platform_device_alloc("ahci", -1);
++	if (!ahci_pdev)
++		return -ENODEV;
++
++	ahci_dev = &ahci_pdev->dev;
++	ahci_dev->parent = dev;
++
++	imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
++	if (IS_ERR(imxpriv->ahb_clk)) {
++		dev_err(dev, "can't get ahb clock.\n");
++		ret = PTR_ERR(imxpriv->ahb_clk);
++		goto err_out;
++	}
++
++	imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
++	if (IS_ERR(imxpriv->sata_ref_clk)) {
++		dev_err(dev, "can't get sata_ref clock.\n");
++		ret = PTR_ERR(imxpriv->sata_ref_clk);
++		goto err_out;
++	}
++
++	imxpriv->ahci_pdev = ahci_pdev;
++	platform_set_drvdata(pdev, imxpriv);
++
++	of_id = of_match_device(imx_ahci_of_match, dev);
++	if (of_id) {
++		pdata = of_id->data;
++	} else {
++		ret = -EINVAL;
++		goto err_out;
++	}
++
++	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
++	if (!mem || !irq) {
++		dev_err(dev, "no mmio/irq resource\n");
++		ret = -ENOMEM;
++		goto err_out;
++	}
++
++	res[0] = *mem;
++	res[1] = *irq;
++
++	ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32);
++	ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask;
++	ahci_dev->of_node = dev->of_node;
++
++	ret = platform_device_add_resources(ahci_pdev, res, 2);
++	if (ret)
++		goto err_out;
++
++	ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata));
++	if (ret)
++		goto err_out;
++
++	ret = platform_device_add(ahci_pdev);
++	if (ret) {
++err_out:
++		platform_device_put(ahci_pdev);
++		return ret;
++	}
++
++	return 0;
++}
++
++static int imx_ahci_remove(struct platform_device *pdev)
++{
++	struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev);
++	struct platform_device *ahci_pdev = imxpriv->ahci_pdev;
++
++	platform_device_unregister(ahci_pdev);
++	return 0;
++}
++
++static struct platform_driver imx_ahci_driver = {
++	.probe = imx_ahci_probe,
++	.remove = imx_ahci_remove,
++	.driver = {
++		.name = "ahci-imx",
++		.owner = THIS_MODULE,
++		.of_match_table = imx_ahci_of_match,
++	},
++};
++module_platform_driver(imx_ahci_driver);
++
++MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver");
++MODULE_AUTHOR("Richard Zhu <Hong-Xing.Zhu@freescale.com>");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS("ahci:imx");
diff --git a/target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch b/target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch
new file mode 100644
index 0000000..11ce9cc
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch
@@ -0,0 +1,145 @@
+From 6a6c21ef487be47b300a0b24cd6afeb69d8b9a1a Mon Sep 17 00:00:00 2001
+From: Richard Zhu <r65037@freescale.com>
+Date: Wed, 24 Jul 2013 14:15:28 +0800
+Subject: [PATCH] ARM: imx6q: update the sata bits definitions of gpr13
+
+Replace the SATA_PHY_# by the more readable definitons.
+
+tj: Being routed through libata branch to enable implementation of
+    ahci_imx.
+
+Signed-off-by: Richard Zhu <r65037@freescale.com>
+Acked-by: Shawn Guo <shawn.guo@linaro.org>
+Signed-off-by: Tejun Heo <tj@kernel.org>
+---
+ include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 121 +++++++++++++++++++---------
+ 1 file changed, 84 insertions(+), 37 deletions(-)
+
+--- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
++++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
+@@ -279,41 +279,88 @@
+ #define IMX6Q_GPR13_CAN2_STOP_REQ		BIT(29)
+ #define IMX6Q_GPR13_CAN1_STOP_REQ		BIT(28)
+ #define IMX6Q_GPR13_ENET_STOP_REQ		BIT(27)
+-#define IMX6Q_GPR13_SATA_PHY_8_MASK		(0x7 << 24)
+-#define IMX6Q_GPR13_SATA_PHY_8_0_5_DB		(0x0 << 24)
+-#define IMX6Q_GPR13_SATA_PHY_8_1_0_DB		(0x1 << 24)
+-#define IMX6Q_GPR13_SATA_PHY_8_1_5_DB		(0x2 << 24)
+-#define IMX6Q_GPR13_SATA_PHY_8_2_0_DB		(0x3 << 24)
+-#define IMX6Q_GPR13_SATA_PHY_8_2_5_DB		(0x4 << 24)
+-#define IMX6Q_GPR13_SATA_PHY_8_3_0_DB		(0x5 << 24)
+-#define IMX6Q_GPR13_SATA_PHY_8_3_5_DB		(0x6 << 24)
+-#define IMX6Q_GPR13_SATA_PHY_8_4_0_DB		(0x7 << 24)
+-#define IMX6Q_GPR13_SATA_PHY_7_MASK		(0x1f << 19)
+-#define IMX6Q_GPR13_SATA_PHY_7_SATA1I		(0x10 << 19)
+-#define IMX6Q_GPR13_SATA_PHY_7_SATA1M		(0x10 << 19)
+-#define IMX6Q_GPR13_SATA_PHY_7_SATA1X		(0x1a << 19)
+-#define IMX6Q_GPR13_SATA_PHY_7_SATA2I		(0x12 << 19)
+-#define IMX6Q_GPR13_SATA_PHY_7_SATA2M		(0x12 << 19)
+-#define IMX6Q_GPR13_SATA_PHY_7_SATA2X		(0x1a << 19)
+-#define IMX6Q_GPR13_SATA_PHY_6_MASK		(0x7 << 16)
+-#define IMX6Q_GPR13_SATA_SPEED_MASK		BIT(15)
+-#define IMX6Q_GPR13_SATA_SPEED_1P5G		0x0
+-#define IMX6Q_GPR13_SATA_SPEED_3P0G		BIT(15)
+-#define IMX6Q_GPR13_SATA_PHY_5			BIT(14)
+-#define IMX6Q_GPR13_SATA_PHY_4_MASK		(0x7 << 11)
+-#define IMX6Q_GPR13_SATA_PHY_4_16_16		(0x0 << 11)
+-#define IMX6Q_GPR13_SATA_PHY_4_14_16		(0x1 << 11)
+-#define IMX6Q_GPR13_SATA_PHY_4_12_16		(0x2 << 11)
+-#define IMX6Q_GPR13_SATA_PHY_4_10_16		(0x3 << 11)
+-#define IMX6Q_GPR13_SATA_PHY_4_9_16		(0x4 << 11)
+-#define IMX6Q_GPR13_SATA_PHY_4_8_16		(0x5 << 11)
+-#define IMX6Q_GPR13_SATA_PHY_3_MASK		(0xf << 7)
+-#define IMX6Q_GPR13_SATA_PHY_3_OFF		0x7
+-#define IMX6Q_GPR13_SATA_PHY_2_MASK		(0x1f << 2)
+-#define IMX6Q_GPR13_SATA_PHY_2_OFF		0x2
+-#define IMX6Q_GPR13_SATA_PHY_1_MASK		(0x3 << 0)
+-#define IMX6Q_GPR13_SATA_PHY_1_FAST		(0x0 << 0)
+-#define IMX6Q_GPR13_SATA_PHY_1_MED		(0x1 << 0)
+-#define IMX6Q_GPR13_SATA_PHY_1_SLOW		(0x2 << 0)
+-
++#define IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK		(0x7 << 24)
++#define IMX6Q_GPR13_SATA_RX_EQ_VAL_0_5_DB	(0x0 << 24)
++#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_0_DB	(0x1 << 24)
++#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_5_DB	(0x2 << 24)
++#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_0_DB	(0x3 << 24)
++#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_5_DB	(0x4 << 24)
++#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB	(0x5 << 24)
++#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_5_DB	(0x6 << 24)
++#define IMX6Q_GPR13_SATA_RX_EQ_VAL_4_0_DB	(0x7 << 24)
++#define IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK	(0x1f << 19)
++#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1I	(0x10 << 19)
++#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1M	(0x10 << 19)
++#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1X	(0x1a << 19)
++#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2I	(0x12 << 19)
++#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M	(0x12 << 19)
++#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2X	(0x1a << 19)
++#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK	(0x7 << 16)
++#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_1F	(0x0 << 16)
++#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_2F	(0x1 << 16)
++#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_4F	(0x2 << 16)
++#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F	(0x3 << 16)
++#define IMX6Q_GPR13_SATA_SPD_MODE_MASK		BIT(15)
++#define IMX6Q_GPR13_SATA_SPD_MODE_1P5G		0x0
++#define IMX6Q_GPR13_SATA_SPD_MODE_3P0G		BIT(15)
++#define IMX6Q_GPR13_SATA_MPLL_SS_EN		BIT(14)
++#define IMX6Q_GPR13_SATA_TX_ATTEN_MASK		(0x7 << 11)
++#define IMX6Q_GPR13_SATA_TX_ATTEN_16_16		(0x0 << 11)
++#define IMX6Q_GPR13_SATA_TX_ATTEN_14_16		(0x1 << 11)
++#define IMX6Q_GPR13_SATA_TX_ATTEN_12_16		(0x2 << 11)
++#define IMX6Q_GPR13_SATA_TX_ATTEN_10_16		(0x3 << 11)
++#define IMX6Q_GPR13_SATA_TX_ATTEN_9_16		(0x4 << 11)
++#define IMX6Q_GPR13_SATA_TX_ATTEN_8_16		(0x5 << 11)
++#define IMX6Q_GPR13_SATA_TX_BOOST_MASK		(0xf << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_0_00_DB	(0x0 << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_0_37_DB	(0x1 << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_0_74_DB	(0x2 << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_1_11_DB	(0x3 << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_1_48_DB	(0x4 << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_1_85_DB	(0x5 << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_2_22_DB	(0x6 << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_2_59_DB	(0x7 << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_2_96_DB	(0x8 << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB	(0x9 << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_3_70_DB	(0xa << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_4_07_DB	(0xb << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_4_44_DB	(0xc << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_4_81_DB	(0xd << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_5_28_DB	(0xe << 7)
++#define IMX6Q_GPR13_SATA_TX_BOOST_5_75_DB	(0xf << 7)
++#define IMX6Q_GPR13_SATA_TX_LVL_MASK		(0x1f << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_0_937_V		(0x00 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_0_947_V		(0x01 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_0_957_V		(0x02 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_0_966_V		(0x03 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_0_976_V		(0x04 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_0_986_V		(0x05 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_0_996_V		(0x06 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_005_V		(0x07 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_015_V		(0x08 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_025_V		(0x09 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_035_V		(0x0a << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_045_V		(0x0b << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_054_V		(0x0c << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_064_V		(0x0d << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_074_V		(0x0e << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_084_V		(0x0f << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_094_V		(0x10 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_104_V		(0x11 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_113_V		(0x12 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_123_V		(0x13 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_133_V		(0x14 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_143_V		(0x15 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_152_V		(0x16 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_162_V		(0x17 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_172_V		(0x18 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_182_V		(0x19 << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_191_V		(0x1a << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_201_V		(0x1b << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_211_V		(0x1c << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_221_V		(0x1d << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_230_V		(0x1e << 2)
++#define IMX6Q_GPR13_SATA_TX_LVL_1_240_V		(0x1f << 2)
++#define IMX6Q_GPR13_SATA_MPLL_CLK_EN		BIT(1)
++#define IMX6Q_GPR13_SATA_TX_EDGE_RATE		BIT(0)
+ #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */
diff --git a/target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch b/target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch
new file mode 100644
index 0000000..72d41ee
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch
@@ -0,0 +1,68 @@
+From 0fb1f804269e549b556b475c8655bc862c220622 Mon Sep 17 00:00:00 2001
+From: Richard Zhu <r65037@freescale.com>
+Date: Tue, 16 Jul 2013 11:28:46 +0800
+Subject: [PATCH] ARM: dtsi: enable ahci sata on imx6q platforms
+
+Only imx6q has the ahci sata controller, enable
+it on imx6q platforms.
+
+Signed-off-by: Richard Zhu <r65037@freescale.com>
+Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
+---
+ arch/arm/boot/dts/imx6q-sabreauto.dts | 4 ++++
+ arch/arm/boot/dts/imx6q-sabrelite.dts | 4 ++++
+ arch/arm/boot/dts/imx6q-sabresd.dts   | 4 ++++
+ arch/arm/boot/dts/imx6q.dtsi          | 9 +++++++++
+ 4 files changed, 21 insertions(+)
+
+--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
++++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
+@@ -33,3 +33,7 @@
+ 		};
+ 	};
+ };
++
++&sata {
++	status = "okay";
++};
+--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
++++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
+@@ -65,6 +65,10 @@
+ 	};
+ };
+ 
++&sata {
++	status = "okay";
++};
++
+ &ecspi1 {
+ 	fsl,spi-num-chipselects = <1>;
+ 	cs-gpios = <&gpio3 19 0>;
+--- a/arch/arm/boot/dts/imx6q-sabresd.dts
++++ b/arch/arm/boot/dts/imx6q-sabresd.dts
+@@ -37,3 +37,7 @@
+ 		};
+ 	};
+ };
++
++&sata {
++	status = "okay";
++};
+--- a/arch/arm/boot/dts/imx6q.dtsi
++++ b/arch/arm/boot/dts/imx6q.dtsi
+@@ -332,6 +332,15 @@
+ 			};
+ 		};
+ 
++		sata: sata@02200000 {
++			compatible = "fsl,imx6q-ahci";
++			reg = <0x02200000 0x4000>;
++			interrupts = <0 39 0x04>;
++			clocks =  <&clks 154>, <&clks 187>, <&clks 105>;
++			clock-names = "sata", "sata_ref", "ahb";
++			status = "disabled";
++		};
++
+ 		ipu2: ipu@02800000 {
+ 			#crtc-cells = <1>;
+ 			compatible = "fsl,imx6q-ipu";
diff --git a/target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch b/target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch
new file mode 100644
index 0000000..7115a6c
--- /dev/null
+++ b/target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch
@@ -0,0 +1,26 @@
+From 867974fc09f93bdd7f98d46ac3733934486bbf4a Mon Sep 17 00:00:00 2001
+From: Tejun Heo <tj@kernel.org>
+Date: Fri, 26 Jul 2013 08:57:56 -0400
+Subject: [PATCH] ahci_imx: depend on CONFIG_MFD_SYSCON
+
+ahci_imx makes use of regmap but the dependency wasn't specified in
+Kconfig leading build failures if CONFIG_AHCI_IMX is enabled but
+CONFIG_MFD_SYSCON is not.  Add the Kconfig dependency.
+
+Signed-off-by: Tejun Heo <tj@kernel.org>
+Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
+---
+ drivers/ata/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/ata/Kconfig
++++ b/drivers/ata/Kconfig
+@@ -99,7 +99,7 @@ config SATA_AHCI_PLATFORM
+ 
+ config AHCI_IMX
+ 	tristate "Freescale i.MX AHCI SATA support"
+-	depends on SATA_AHCI_PLATFORM
++	depends on SATA_AHCI_PLATFORM && MFD_SYSCON
+ 	help
+ 	  This option enables support for the Freescale i.MX SoC's
+ 	  onboard AHCI SATA.