summaryrefslogtreecommitdiff
path: root/target/linux/imx6/patches-3.10
diff options
context:
space:
mode:
authorLuka Perkov <luka@openwrt.org>2014-08-08 13:38:31 +0000
committerLuka Perkov <luka@openwrt.org>2014-08-08 13:38:31 +0000
commitc84876702bd726ec9fd58ffa3a21c95173d2ea6b (patch)
treeae7b5252454a565bf1789b4c80c76fe81aad69a2 /target/linux/imx6/patches-3.10
parent4c2c390a239d005aadf5629e4b8b09717e1e5df5 (diff)
downloadmtk-20170518-c84876702bd726ec9fd58ffa3a21c95173d2ea6b.zip
mtk-20170518-c84876702bd726ec9fd58ffa3a21c95173d2ea6b.tar.gz
mtk-20170518-c84876702bd726ec9fd58ffa3a21c95173d2ea6b.tar.bz2
imx6: drop 3.10 support
Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42075
Diffstat (limited to 'target/linux/imx6/patches-3.10')
-rw-r--r--target/linux/imx6/patches-3.10/0001-usb-chipidea-improve-kconfig.patch80
-rw-r--r--target/linux/imx6/patches-3.10/0002-usb-chipidea-fix-the-build-error-with-randconfig.patch42
-rw-r--r--target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch51
-rw-r--r--target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch304
-rw-r--r--target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch143
-rw-r--r--target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch66
-rw-r--r--target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch24
-rw-r--r--target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch194
-rw-r--r--target/linux/imx6/patches-3.10/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch37
-rw-r--r--target/linux/imx6/patches-3.10/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch616
-rw-r--r--target/linux/imx6/patches-3.10/0012-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch70
-rw-r--r--target/linux/imx6/patches-3.10/0013-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch38
-rw-r--r--target/linux/imx6/patches-3.10/0014-ARM-dts-imx6qdl-add-pcie-device-node.patch38
-rw-r--r--target/linux/imx6/patches-3.10/0015-thermal-add-imx-thermal-driver-support.patch477
-rw-r--r--target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch667
-rw-r--r--target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch44
-rw-r--r--target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch35
-rw-r--r--target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch21
-rw-r--r--target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch32
-rw-r--r--target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch19
-rw-r--r--target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch22
-rw-r--r--target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch67
-rw-r--r--target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch56
-rw-r--r--target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch23
-rw-r--r--target/linux/imx6/patches-3.10/0029-regulator-pfuze100-allow-misprogrammed-ID.patch32
-rw-r--r--target/linux/imx6/patches-3.10/0030-pcie-designware-fix-io-transfers.patch58
-rw-r--r--target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch24
-rw-r--r--target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch36
-rw-r--r--target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch24
-rw-r--r--target/linux/imx6/patches-3.10/0034-PCI-imx6-add-support-for-legacy-irqs.patch43
-rw-r--r--target/linux/imx6/patches-3.10/0050-sky2-allow-mac-to-come-from-dt.patch69
-rw-r--r--target/linux/imx6/patches-3.10/0060-flexcan.patch92
-rw-r--r--target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch37
-rw-r--r--target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch45
-rw-r--r--target/linux/imx6/patches-3.10/100-bootargs.patch13
-rw-r--r--target/linux/imx6/patches-3.10/110-gateworks-ventana.patch263
-rw-r--r--target/linux/imx6/patches-3.10/120-ventana-init.ptach70
37 files changed, 0 insertions, 3972 deletions
diff --git a/target/linux/imx6/patches-3.10/0001-usb-chipidea-improve-kconfig.patch b/target/linux/imx6/patches-3.10/0001-usb-chipidea-improve-kconfig.patch
deleted file mode 100644
index f8229d0..0000000
--- a/target/linux/imx6/patches-3.10/0001-usb-chipidea-improve-kconfig.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From: Peter Chen <peter.chen@freescale.com>
-Subject: [PATCH] usb: chipidea: improve kconfig
-
-Randy Dunlap <rdunlap@infradead.org> reported this problem
-on i386:
-
-> drivers/built-in.o: In function `ci_hdrc_host_init':
-> (.text+0x2ce75c): undefined reference to `ehci_init_driver'
->
-> When USB_EHCI_HCD=m and USB_CHIPIDEA=y.
-
-In fact, this problem is existed on all platforms which are using
-chipidea driver. The root cause of this problem is the chipidea host
-uses symbol exported from ehci-hcd, but chipidea core
-does not depends on USB_EHCI_HCD. So, chipidea driver
-will not be compiled as module if USB_EHCI_HCD=m.
-
-It is very hard to give a perfect solution since chipidea core
-depends on USB || USB_GADGET, and chipdiea host depends on
-both USB_EHCI_HCD and USB_CHIPIDEA, the same problem exists for
-gadget.
-
-To fix this problem, we had to have below assumptions:
-
-- If USB_EHCI_HCD=y && USB_GADGET=y, USB_CHIPIDEA can be 'y'.
-
-- If USB_EHCI_HCD=m && USB_GADGET=y, USB_CHIPIDEA=m
-or USB_CHIPIDEA_HOST can't be seen if USB_CHIPIDEA=y.
-It will cause compile error due to no glue layer for ehci:
-
-> error: #error "missing bus glue for ehci-hcd"
-
-So, we had to compile USB_CHIPIDEA=m if USB_EHCI_HCD=m,
-current ehci hcd core guarantee it.
-
-- If USB_EHCI_HCD=y && USB_GADGET=m, USB_CHIPIDEA=m
-or USB_CHIPIDEA_UDC can't be seen if USB_CHIPIDEA=y.
-Of cos, the gadget will out of working at this situation,
-so the user had to compile USB_CHIPIDEA=m.
-
-- USB_EHCI_HCD=m && USB_GADGET=m, we can't see
-USB_CHIPIDEA_HOST and USB_CHIPIDEA_UDC unless
-USB_CHIPIDEA=m.
-
-The reason why it has above assumptions:
-- If both ehci core and gadget core build as module,
-the chipidea has to build as module.
-- If one of ehci core or gadget core is built in, another
-is built as module, we can only enable the function which
-is built in, or enable both roles as modules (USB_CHIPIDEA=m),
-since chipidea core driver takes care of both host and device roles.
-
-Signed-off-by: Peter Chen <peter.chen@freescale.com>
-Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/chipidea/Kconfig | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/chipidea/Kconfig
-+++ b/drivers/usb/chipidea/Kconfig
-@@ -12,15 +12,15 @@ if USB_CHIPIDEA
-
- config USB_CHIPIDEA_UDC
- bool "ChipIdea device controller"
-- depends on USB_GADGET=y || USB_GADGET=USB_CHIPIDEA
-+ depends on USB_GADGET=y || USB_CHIPIDEA=m
- help
- Say Y here to enable device controller functionality of the
- ChipIdea driver.
-
- config USB_CHIPIDEA_HOST
- bool "ChipIdea host controller"
-- depends on USB=y || USB=USB_CHIPIDEA
-- depends on USB_EHCI_HCD=y
-+ depends on USB=y
-+ depends on USB_EHCI_HCD=y || USB_CHIPIDEA=m
- select USB_EHCI_ROOT_HUB_TT
- help
- Say Y here to enable host controller functionality of the
diff --git a/target/linux/imx6/patches-3.10/0002-usb-chipidea-fix-the-build-error-with-randconfig.patch b/target/linux/imx6/patches-3.10/0002-usb-chipidea-fix-the-build-error-with-randconfig.patch
deleted file mode 100644
index e44682c..0000000
--- a/target/linux/imx6/patches-3.10/0002-usb-chipidea-fix-the-build-error-with-randconfig.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From: Peter Chen <peter.chen@freescale.com>
-Subject: [PATCH] usb: chipidea: fix the build error with randconfig
-
-Using below configs, the compile will have error:
-ERROR: "ehci_init_driver" undefined!
-
-.config:
-CONFIG_USB_CHIPIDEA=m
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_DEBUG=y
-
-The reason is chipidea host uses symbol from ehci, but ehci
-is not compiled. Let the chipidea host depend on
-ehci even it is built as module.
-
-Signed-off-by: Peter Chen <peter.chen@freescale.com>
-Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/chipidea/Kconfig | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/usb/chipidea/Kconfig
-+++ b/drivers/usb/chipidea/Kconfig
-@@ -12,7 +12,7 @@ if USB_CHIPIDEA
-
- config USB_CHIPIDEA_UDC
- bool "ChipIdea device controller"
-- depends on USB_GADGET=y || USB_CHIPIDEA=m
-+ depends on USB_GADGET=y || (USB_CHIPIDEA=m && USB_GADGET=m)
- help
- Say Y here to enable device controller functionality of the
- ChipIdea driver.
-@@ -20,7 +20,7 @@ config USB_CHIPIDEA_UDC
- config USB_CHIPIDEA_HOST
- bool "ChipIdea host controller"
- depends on USB=y
-- depends on USB_EHCI_HCD=y || USB_CHIPIDEA=m
-+ depends on USB_EHCI_HCD=y || (USB_CHIPIDEA=m && USB_EHCI_HCD=m)
- select USB_EHCI_ROOT_HUB_TT
- help
- Say Y here to enable host controller functionality of the
diff --git a/target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch b/target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch
deleted file mode 100644
index f90e736..0000000
--- a/target/linux/imx6/patches-3.10/0003-usb-chipidea-improve-kconfig-2.0.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From: Lothar Waßmann <LW@KARO-electronics.de>
-Subject: [PATCH] usb: chipidea: improve kconfig 2.0
-
-This patch provides a cleaner solution to the problem described in
-commit 20a677fd ("usb: chipidea: improve kconfig").
-
-The goal to be achieved is to force USB_CHIPIDEA=m if either
-USB_EHCI_HCD=m or USB_GADGET=m.
-If both are 'y' USB_CHIPIDEA may be selected to be 'm' or 'y'.
-
-The old patch had the drawback, that USB_CHIPIDEA could be chosen as
-'y' though USB_EHCI_HCD or USB_GADGET (or both) were 'm' leading to a
-situation where USB_CHIPIDEA_HOST or USB_CHIPIDEA_UDC vanished from
-the config options producing a compilable but dysfunctional driver.
-
-Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
-Reviewed-by: Peter Chen <peter.chen@freescale.com>
-Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/chipidea/Kconfig | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/chipidea/Kconfig
-+++ b/drivers/usb/chipidea/Kconfig
-@@ -1,6 +1,6 @@
- config USB_CHIPIDEA
- tristate "ChipIdea Highspeed Dual Role Controller"
-- depends on USB || USB_GADGET
-+ depends on (USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)
- help
- Say Y here if your system has a dual role high speed USB
- controller based on ChipIdea silicon IP. Currently, only the
-@@ -12,15 +12,14 @@ if USB_CHIPIDEA
-
- config USB_CHIPIDEA_UDC
- bool "ChipIdea device controller"
-- depends on USB_GADGET=y || (USB_CHIPIDEA=m && USB_GADGET=m)
-+ depends on USB_GADGET
- help
- Say Y here to enable device controller functionality of the
- ChipIdea driver.
-
- config USB_CHIPIDEA_HOST
- bool "ChipIdea host controller"
-- depends on USB=y
-- depends on USB_EHCI_HCD=y || (USB_CHIPIDEA=m && USB_EHCI_HCD=m)
-+ depends on USB_EHCI_HCD
- select USB_EHCI_ROOT_HUB_TT
- help
- Say Y here to enable host controller functionality of the
diff --git a/target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch b/target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch
deleted file mode 100644
index c735517..0000000
--- a/target/linux/imx6/patches-3.10/0005-ahci_imx-add-ahci-sata-support-on-imx-platforms.patch
+++ /dev/null
@@ -1,304 +0,0 @@
-From: Richard Zhu <r65037@freescale.com>
-Subject: [PATCH] ahci_imx: add ahci sata support on imx platforms
-
-imx6q contains one Synopsys AHCI SATA controller, But it can't share
-ahci_platform driver with other controllers because there are some
-misalignments of the generic AHCI controller - the bits definitions of
-the HBA registers, the Vendor Specific registers, the AHCI PHY clock
-and the AHCI signals adjustment window(GPR13 register).
-
- - CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0',
- should be configured to be '1'
-
- - bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL
- should be set to be '1'.(default 0)
-
- - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be
- configured regarding to the frequency of AHB bus clock.
-
- - Configurations of the AHCI PHY clock, and the signal parameters of
- the GPR13
-
-Setup its own ahci sata driver, contained the imx6q specific
-initialized codes, re-use the generic ahci_platform driver, and keep
-the generic ahci_platform driver clean as much as possible.
-
-tj: patch description reformatted
-
-Signed-off-by: Richard Zhu <r65037@freescale.com>
-Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Tejun Heo <tj@kernel.org>
----
- drivers/ata/Kconfig | 9 ++
- drivers/ata/Makefile | 1 +
- drivers/ata/ahci_imx.c | 236 +++++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 246 insertions(+)
- create mode 100644 drivers/ata/ahci_imx.c
-
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -97,6 +97,15 @@ config SATA_AHCI_PLATFORM
-
- If unsure, say N.
-
-+config AHCI_IMX
-+ tristate "Freescale i.MX AHCI SATA support"
-+ depends on SATA_AHCI_PLATFORM
-+ help
-+ This option enables support for the Freescale i.MX SoC's
-+ onboard AHCI SATA.
-+
-+ If unsure, say N.
-+
- config SATA_FSL
- tristate "Freescale 3.0Gbps SATA support"
- depends on FSL_SOC
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -10,6 +10,7 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic
- obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
- obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
- obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
-+obj-$(CONFIG_AHCI_IMX) += ahci_imx.o
-
- # SFF w/ custom DMA
- obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
---- /dev/null
-+++ b/drivers/ata/ahci_imx.c
-@@ -0,0 +1,236 @@
-+/*
-+ * Freescale IMX AHCI SATA platform driver
-+ * Copyright 2013 Freescale Semiconductor, Inc.
-+ *
-+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms and conditions of the GNU General Public License,
-+ * version 2, as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-+ * more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along with
-+ * this program. If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/ahci_platform.h>
-+#include <linux/of_device.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-+#include "ahci.h"
-+
-+enum {
-+ HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
-+};
-+
-+struct imx_ahci_priv {
-+ struct platform_device *ahci_pdev;
-+ struct clk *sata_ref_clk;
-+ struct clk *ahb_clk;
-+ struct regmap *gpr;
-+};
-+
-+static int imx6q_sata_init(struct device *dev, void __iomem *mmio)
-+{
-+ int ret = 0;
-+ unsigned int reg_val;
-+ struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
-+
-+ imxpriv->gpr =
-+ syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
-+ if (IS_ERR(imxpriv->gpr)) {
-+ dev_err(dev, "failed to find fsl,imx6q-iomux-gpr regmap\n");
-+ return PTR_ERR(imxpriv->gpr);
-+ }
-+
-+ ret = clk_prepare_enable(imxpriv->sata_ref_clk);
-+ if (ret < 0) {
-+ dev_err(dev, "prepare-enable sata_ref clock err:%d\n", ret);
-+ return ret;
-+ }
-+
-+ /*
-+ * set PHY Paremeters, two steps to configure the GPR13,
-+ * one write for rest of parameters, mask of first write
-+ * is 0x07fffffd, and the other one write for setting
-+ * the mpll_clk_en.
-+ */
-+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK
-+ | IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK
-+ | IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK
-+ | IMX6Q_GPR13_SATA_SPD_MODE_MASK
-+ | IMX6Q_GPR13_SATA_MPLL_SS_EN
-+ | IMX6Q_GPR13_SATA_TX_ATTEN_MASK
-+ | IMX6Q_GPR13_SATA_TX_BOOST_MASK
-+ | IMX6Q_GPR13_SATA_TX_LVL_MASK
-+ | IMX6Q_GPR13_SATA_TX_EDGE_RATE
-+ , IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB
-+ | IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M
-+ | IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F
-+ | IMX6Q_GPR13_SATA_SPD_MODE_3P0G
-+ | IMX6Q_GPR13_SATA_MPLL_SS_EN
-+ | IMX6Q_GPR13_SATA_TX_ATTEN_9_16
-+ | IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB
-+ | IMX6Q_GPR13_SATA_TX_LVL_1_025_V);
-+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
-+ IMX6Q_GPR13_SATA_MPLL_CLK_EN);
-+ usleep_range(100, 200);
-+
-+ /*
-+ * Configure the HWINIT bits of the HOST_CAP and HOST_PORTS_IMPL,
-+ * and IP vendor specific register HOST_TIMER1MS.
-+ * Configure CAP_SSS (support stagered spin up).
-+ * Implement the port0.
-+ * Get the ahb clock rate, and configure the TIMER1MS register.
-+ */
-+ reg_val = readl(mmio + HOST_CAP);
-+ if (!(reg_val & HOST_CAP_SSS)) {
-+ reg_val |= HOST_CAP_SSS;
-+ writel(reg_val, mmio + HOST_CAP);
-+ }
-+ reg_val = readl(mmio + HOST_PORTS_IMPL);
-+ if (!(reg_val & 0x1)) {
-+ reg_val |= 0x1;
-+ writel(reg_val, mmio + HOST_PORTS_IMPL);
-+ }
-+
-+ reg_val = clk_get_rate(imxpriv->ahb_clk) / 1000;
-+ writel(reg_val, mmio + HOST_TIMER1MS);
-+
-+ return 0;
-+}
-+
-+static void imx6q_sata_exit(struct device *dev)
-+{
-+ struct imx_ahci_priv *imxpriv = dev_get_drvdata(dev->parent);
-+
-+ regmap_update_bits(imxpriv->gpr, 0x34, IMX6Q_GPR13_SATA_MPLL_CLK_EN,
-+ !IMX6Q_GPR13_SATA_MPLL_CLK_EN);
-+ clk_disable_unprepare(imxpriv->sata_ref_clk);
-+}
-+
-+static struct ahci_platform_data imx6q_sata_pdata = {
-+ .init = imx6q_sata_init,
-+ .exit = imx6q_sata_exit,
-+};
-+
-+static const struct of_device_id imx_ahci_of_match[] = {
-+ { .compatible = "fsl,imx6q-ahci", .data = &imx6q_sata_pdata},
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, imx_ahci_of_match);
-+
-+static int imx_ahci_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct resource *mem, *irq, res[2];
-+ const struct of_device_id *of_id;
-+ const struct ahci_platform_data *pdata = NULL;
-+ struct imx_ahci_priv *imxpriv;
-+ struct device *ahci_dev;
-+ struct platform_device *ahci_pdev;
-+ int ret;
-+
-+ imxpriv = devm_kzalloc(dev, sizeof(*imxpriv), GFP_KERNEL);
-+ if (!imxpriv) {
-+ dev_err(dev, "can't alloc ahci_host_priv\n");
-+ return -ENOMEM;
-+ }
-+
-+ ahci_pdev = platform_device_alloc("ahci", -1);
-+ if (!ahci_pdev)
-+ return -ENODEV;
-+
-+ ahci_dev = &ahci_pdev->dev;
-+ ahci_dev->parent = dev;
-+
-+ imxpriv->ahb_clk = devm_clk_get(dev, "ahb");
-+ if (IS_ERR(imxpriv->ahb_clk)) {
-+ dev_err(dev, "can't get ahb clock.\n");
-+ ret = PTR_ERR(imxpriv->ahb_clk);
-+ goto err_out;
-+ }
-+
-+ imxpriv->sata_ref_clk = devm_clk_get(dev, "sata_ref");
-+ if (IS_ERR(imxpriv->sata_ref_clk)) {
-+ dev_err(dev, "can't get sata_ref clock.\n");
-+ ret = PTR_ERR(imxpriv->sata_ref_clk);
-+ goto err_out;
-+ }
-+
-+ imxpriv->ahci_pdev = ahci_pdev;
-+ platform_set_drvdata(pdev, imxpriv);
-+
-+ of_id = of_match_device(imx_ahci_of_match, dev);
-+ if (of_id) {
-+ pdata = of_id->data;
-+ } else {
-+ ret = -EINVAL;
-+ goto err_out;
-+ }
-+
-+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-+ if (!mem || !irq) {
-+ dev_err(dev, "no mmio/irq resource\n");
-+ ret = -ENOMEM;
-+ goto err_out;
-+ }
-+
-+ res[0] = *mem;
-+ res[1] = *irq;
-+
-+ ahci_dev->coherent_dma_mask = DMA_BIT_MASK(32);
-+ ahci_dev->dma_mask = &ahci_dev->coherent_dma_mask;
-+ ahci_dev->of_node = dev->of_node;
-+
-+ ret = platform_device_add_resources(ahci_pdev, res, 2);
-+ if (ret)
-+ goto err_out;
-+
-+ ret = platform_device_add_data(ahci_pdev, pdata, sizeof(*pdata));
-+ if (ret)
-+ goto err_out;
-+
-+ ret = platform_device_add(ahci_pdev);
-+ if (ret) {
-+err_out:
-+ platform_device_put(ahci_pdev);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int imx_ahci_remove(struct platform_device *pdev)
-+{
-+ struct imx_ahci_priv *imxpriv = platform_get_drvdata(pdev);
-+ struct platform_device *ahci_pdev = imxpriv->ahci_pdev;
-+
-+ platform_device_unregister(ahci_pdev);
-+ return 0;
-+}
-+
-+static struct platform_driver imx_ahci_driver = {
-+ .probe = imx_ahci_probe,
-+ .remove = imx_ahci_remove,
-+ .driver = {
-+ .name = "ahci-imx",
-+ .owner = THIS_MODULE,
-+ .of_match_table = imx_ahci_of_match,
-+ },
-+};
-+module_platform_driver(imx_ahci_driver);
-+
-+MODULE_DESCRIPTION("Freescale i.MX AHCI SATA platform driver");
-+MODULE_AUTHOR("Richard Zhu <Hong-Xing.Zhu@freescale.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("ahci:imx");
diff --git a/target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch b/target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch
deleted file mode 100644
index 646273a..0000000
--- a/target/linux/imx6/patches-3.10/0006-ARM-imx6q-update-the-sata-bits-definitions-of-gpr13.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From: Richard Zhu <r65037@freescale.com>
-Subject: [PATCH] ARM: imx6q: update the sata bits definitions of gpr13
-
-Replace the SATA_PHY_# by the more readable definitons.
-
-tj: Being routed through libata branch to enable implementation of
- ahci_imx.
-
-Signed-off-by: Richard Zhu <r65037@freescale.com>
-Acked-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Tejun Heo <tj@kernel.org>
----
- include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 121 +++++++++++++++++++---------
- 1 file changed, 84 insertions(+), 37 deletions(-)
-
---- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
-+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
-@@ -279,41 +279,88 @@
- #define IMX6Q_GPR13_CAN2_STOP_REQ BIT(29)
- #define IMX6Q_GPR13_CAN1_STOP_REQ BIT(28)
- #define IMX6Q_GPR13_ENET_STOP_REQ BIT(27)
--#define IMX6Q_GPR13_SATA_PHY_8_MASK (0x7 << 24)
--#define IMX6Q_GPR13_SATA_PHY_8_0_5_DB (0x0 << 24)
--#define IMX6Q_GPR13_SATA_PHY_8_1_0_DB (0x1 << 24)
--#define IMX6Q_GPR13_SATA_PHY_8_1_5_DB (0x2 << 24)
--#define IMX6Q_GPR13_SATA_PHY_8_2_0_DB (0x3 << 24)
--#define IMX6Q_GPR13_SATA_PHY_8_2_5_DB (0x4 << 24)
--#define IMX6Q_GPR13_SATA_PHY_8_3_0_DB (0x5 << 24)
--#define IMX6Q_GPR13_SATA_PHY_8_3_5_DB (0x6 << 24)
--#define IMX6Q_GPR13_SATA_PHY_8_4_0_DB (0x7 << 24)
--#define IMX6Q_GPR13_SATA_PHY_7_MASK (0x1f << 19)
--#define IMX6Q_GPR13_SATA_PHY_7_SATA1I (0x10 << 19)
--#define IMX6Q_GPR13_SATA_PHY_7_SATA1M (0x10 << 19)
--#define IMX6Q_GPR13_SATA_PHY_7_SATA1X (0x1a << 19)
--#define IMX6Q_GPR13_SATA_PHY_7_SATA2I (0x12 << 19)
--#define IMX6Q_GPR13_SATA_PHY_7_SATA2M (0x12 << 19)
--#define IMX6Q_GPR13_SATA_PHY_7_SATA2X (0x1a << 19)
--#define IMX6Q_GPR13_SATA_PHY_6_MASK (0x7 << 16)
--#define IMX6Q_GPR13_SATA_SPEED_MASK BIT(15)
--#define IMX6Q_GPR13_SATA_SPEED_1P5G 0x0
--#define IMX6Q_GPR13_SATA_SPEED_3P0G BIT(15)
--#define IMX6Q_GPR13_SATA_PHY_5 BIT(14)
--#define IMX6Q_GPR13_SATA_PHY_4_MASK (0x7 << 11)
--#define IMX6Q_GPR13_SATA_PHY_4_16_16 (0x0 << 11)
--#define IMX6Q_GPR13_SATA_PHY_4_14_16 (0x1 << 11)
--#define IMX6Q_GPR13_SATA_PHY_4_12_16 (0x2 << 11)
--#define IMX6Q_GPR13_SATA_PHY_4_10_16 (0x3 << 11)
--#define IMX6Q_GPR13_SATA_PHY_4_9_16 (0x4 << 11)
--#define IMX6Q_GPR13_SATA_PHY_4_8_16 (0x5 << 11)
--#define IMX6Q_GPR13_SATA_PHY_3_MASK (0xf << 7)
--#define IMX6Q_GPR13_SATA_PHY_3_OFF 0x7
--#define IMX6Q_GPR13_SATA_PHY_2_MASK (0x1f << 2)
--#define IMX6Q_GPR13_SATA_PHY_2_OFF 0x2
--#define IMX6Q_GPR13_SATA_PHY_1_MASK (0x3 << 0)
--#define IMX6Q_GPR13_SATA_PHY_1_FAST (0x0 << 0)
--#define IMX6Q_GPR13_SATA_PHY_1_MED (0x1 << 0)
--#define IMX6Q_GPR13_SATA_PHY_1_SLOW (0x2 << 0)
--
-+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_MASK (0x7 << 24)
-+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_0_5_DB (0x0 << 24)
-+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_0_DB (0x1 << 24)
-+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_1_5_DB (0x2 << 24)
-+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_0_DB (0x3 << 24)
-+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_2_5_DB (0x4 << 24)
-+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_0_DB (0x5 << 24)
-+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_3_5_DB (0x6 << 24)
-+#define IMX6Q_GPR13_SATA_RX_EQ_VAL_4_0_DB (0x7 << 24)
-+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_MASK (0x1f << 19)
-+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1I (0x10 << 19)
-+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1M (0x10 << 19)
-+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA1X (0x1a << 19)
-+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2I (0x12 << 19)
-+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2M (0x12 << 19)
-+#define IMX6Q_GPR13_SATA_RX_LOS_LVL_SATA2X (0x1a << 19)
-+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_MASK (0x7 << 16)
-+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_1F (0x0 << 16)
-+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_2F (0x1 << 16)
-+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_1P_4F (0x2 << 16)
-+#define IMX6Q_GPR13_SATA_RX_DPLL_MODE_2P_4F (0x3 << 16)
-+#define IMX6Q_GPR13_SATA_SPD_MODE_MASK BIT(15)
-+#define IMX6Q_GPR13_SATA_SPD_MODE_1P5G 0x0
-+#define IMX6Q_GPR13_SATA_SPD_MODE_3P0G BIT(15)
-+#define IMX6Q_GPR13_SATA_MPLL_SS_EN BIT(14)
-+#define IMX6Q_GPR13_SATA_TX_ATTEN_MASK (0x7 << 11)
-+#define IMX6Q_GPR13_SATA_TX_ATTEN_16_16 (0x0 << 11)
-+#define IMX6Q_GPR13_SATA_TX_ATTEN_14_16 (0x1 << 11)
-+#define IMX6Q_GPR13_SATA_TX_ATTEN_12_16 (0x2 << 11)
-+#define IMX6Q_GPR13_SATA_TX_ATTEN_10_16 (0x3 << 11)
-+#define IMX6Q_GPR13_SATA_TX_ATTEN_9_16 (0x4 << 11)
-+#define IMX6Q_GPR13_SATA_TX_ATTEN_8_16 (0x5 << 11)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_MASK (0xf << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_0_00_DB (0x0 << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_0_37_DB (0x1 << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_0_74_DB (0x2 << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_1_11_DB (0x3 << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_1_48_DB (0x4 << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_1_85_DB (0x5 << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_2_22_DB (0x6 << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_2_59_DB (0x7 << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_2_96_DB (0x8 << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_3_33_DB (0x9 << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_3_70_DB (0xa << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_4_07_DB (0xb << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_4_44_DB (0xc << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_4_81_DB (0xd << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_5_28_DB (0xe << 7)
-+#define IMX6Q_GPR13_SATA_TX_BOOST_5_75_DB (0xf << 7)
-+#define IMX6Q_GPR13_SATA_TX_LVL_MASK (0x1f << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_0_937_V (0x00 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_0_947_V (0x01 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_0_957_V (0x02 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_0_966_V (0x03 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_0_976_V (0x04 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_0_986_V (0x05 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_0_996_V (0x06 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_005_V (0x07 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_015_V (0x08 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_025_V (0x09 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_035_V (0x0a << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_045_V (0x0b << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_054_V (0x0c << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_064_V (0x0d << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_074_V (0x0e << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_084_V (0x0f << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_094_V (0x10 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_104_V (0x11 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_113_V (0x12 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_123_V (0x13 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_133_V (0x14 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_143_V (0x15 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_152_V (0x16 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_162_V (0x17 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_172_V (0x18 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_182_V (0x19 << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_191_V (0x1a << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_201_V (0x1b << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_211_V (0x1c << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_221_V (0x1d << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_230_V (0x1e << 2)
-+#define IMX6Q_GPR13_SATA_TX_LVL_1_240_V (0x1f << 2)
-+#define IMX6Q_GPR13_SATA_MPLL_CLK_EN BIT(1)
-+#define IMX6Q_GPR13_SATA_TX_EDGE_RATE BIT(0)
- #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */
diff --git a/target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch b/target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch
deleted file mode 100644
index 5371524..0000000
--- a/target/linux/imx6/patches-3.10/0007-ARM-dtsi-enable-ahci-sata-on-imx6q-platforms.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From: Richard Zhu <r65037@freescale.com>
-Subject: [PATCH] ARM: dtsi: enable ahci sata on imx6q platforms
-
-Only imx6q has the ahci sata controller, enable
-it on imx6q platforms.
-
-Signed-off-by: Richard Zhu <r65037@freescale.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6q-sabreauto.dts | 4 ++++
- arch/arm/boot/dts/imx6q-sabrelite.dts | 4 ++++
- arch/arm/boot/dts/imx6q-sabresd.dts | 4 ++++
- arch/arm/boot/dts/imx6q.dtsi | 9 +++++++++
- 4 files changed, 21 insertions(+)
-
---- a/arch/arm/boot/dts/imx6q-sabreauto.dts
-+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
-@@ -33,3 +33,7 @@
- };
- };
- };
-+
-+&sata {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/imx6q-sabrelite.dts
-+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
-@@ -65,6 +65,10 @@
- };
- };
-
-+&sata {
-+ status = "okay";
-+};
-+
- &ecspi1 {
- fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio3 19 0>;
---- a/arch/arm/boot/dts/imx6q-sabresd.dts
-+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
-@@ -37,3 +37,7 @@
- };
- };
- };
-+
-+&sata {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/imx6q.dtsi
-+++ b/arch/arm/boot/dts/imx6q.dtsi
-@@ -332,6 +332,15 @@
- };
- };
-
-+ sata: sata@02200000 {
-+ compatible = "fsl,imx6q-ahci";
-+ reg = <0x02200000 0x4000>;
-+ interrupts = <0 39 0x04>;
-+ clocks = <&clks 154>, <&clks 187>, <&clks 105>;
-+ clock-names = "sata", "sata_ref", "ahb";
-+ status = "disabled";
-+ };
-+
- ipu2: ipu@02800000 {
- #crtc-cells = <1>;
- compatible = "fsl,imx6q-ipu";
diff --git a/target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch b/target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch
deleted file mode 100644
index 86e7d8f..0000000
--- a/target/linux/imx6/patches-3.10/0008-ahci_imx-depend-on-CONFIG_MFD_SYSCON.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From: Tejun Heo <tj@kernel.org>
-Subject: [PATCH] ahci_imx: depend on CONFIG_MFD_SYSCON
-
-ahci_imx makes use of regmap but the dependency wasn't specified in
-Kconfig leading build failures if CONFIG_AHCI_IMX is enabled but
-CONFIG_MFD_SYSCON is not. Add the Kconfig dependency.
-
-Signed-off-by: Tejun Heo <tj@kernel.org>
-Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
----
- drivers/ata/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -99,7 +99,7 @@ config SATA_AHCI_PLATFORM
-
- config AHCI_IMX
- tristate "Freescale i.MX AHCI SATA support"
-- depends on SATA_AHCI_PLATFORM
-+ depends on SATA_AHCI_PLATFORM && MFD_SYSCON
- help
- This option enables support for the Freescale i.MX SoC's
- onboard AHCI SATA.
diff --git a/target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch b/target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch
deleted file mode 100644
index 45e1dc2..0000000
--- a/target/linux/imx6/patches-3.10/0009-of-pci-Provide-support-for-parsing-PCI-DT-ranges-pro.patch
+++ /dev/null
@@ -1,194 +0,0 @@
-From: Andrew Murray <Andrew.Murray@arm.com>
-Subject: [PATCH] of/pci: Provide support for parsing PCI DT ranges property
-
-This patch factors out common implementation patterns to reduce overall kernel
-code and provide a means for host bridge drivers to directly obtain struct
-resources from the DT's ranges property without relying on architecture specific
-DT handling. This will make it easier to write archiecture independent host bridge
-drivers and mitigate against further duplication of DT parsing code.
-
-This patch can be used in the following way:
-
- struct of_pci_range_parser parser;
- struct of_pci_range range;
-
- if (of_pci_range_parser_init(&parser, np))
- ; //no ranges property
-
- for_each_of_pci_range(&parser, &range) {
-
- /*
- directly access properties of the address range, e.g.:
- range.pci_space, range.pci_addr, range.cpu_addr,
- range.size, range.flags
-
- alternatively obtain a struct resource, e.g.:
- struct resource res;
- of_pci_range_to_resource(&range, np, &res);
- */
- }
-
-Additionally the implementation takes care of adjacent ranges and merges them
-into a single range (as was the case with powerpc and microblaze).
-
-Signed-off-by: Andrew Murray <Andrew.Murray@arm.com>
-Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Reviewed-by: Rob Herring <rob.herring@calxeda.com>
-Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Tested-by: Linus Walleij <linus.walleij@linaro.org>
-Tested-by: Jingoo Han <jg1.han@samsung.com>
-Acked-by: Grant Likely <grant.likely@secretlab.ca>
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
----
- drivers/of/address.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++
- include/linux/of_address.h | 48 +++++++++++++++++++++++++++++++++
- 2 files changed, 115 insertions(+)
-
---- a/drivers/of/address.c
-+++ b/drivers/of/address.c
-@@ -224,6 +224,73 @@ int of_pci_address_to_resource(struct de
- return __of_address_to_resource(dev, addrp, size, flags, NULL, r);
- }
- EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
-+
-+int of_pci_range_parser_init(struct of_pci_range_parser *parser,
-+ struct device_node *node)
-+{
-+ const int na = 3, ns = 2;
-+ int rlen;
-+
-+ parser->node = node;
-+ parser->pna = of_n_addr_cells(node);
-+ parser->np = parser->pna + na + ns;
-+
-+ parser->range = of_get_property(node, "ranges", &rlen);
-+ if (parser->range == NULL)
-+ return -ENOENT;
-+
-+ parser->end = parser->range + rlen / sizeof(__be32);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(of_pci_range_parser_init);
-+
-+struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
-+ struct of_pci_range *range)
-+{
-+ const int na = 3, ns = 2;
-+
-+ if (!range)
-+ return NULL;
-+
-+ if (!parser->range || parser->range + parser->np > parser->end)
-+ return NULL;
-+
-+ range->pci_space = parser->range[0];
-+ range->flags = of_bus_pci_get_flags(parser->range);
-+ range->pci_addr = of_read_number(parser->range + 1, ns);
-+ range->cpu_addr = of_translate_address(parser->node,
-+ parser->range + na);
-+ range->size = of_read_number(parser->range + parser->pna + na, ns);
-+
-+ parser->range += parser->np;
-+
-+ /* Now consume following elements while they are contiguous */
-+ while (parser->range + parser->np <= parser->end) {
-+ u32 flags, pci_space;
-+ u64 pci_addr, cpu_addr, size;
-+
-+ pci_space = be32_to_cpup(parser->range);
-+ flags = of_bus_pci_get_flags(parser->range);
-+ pci_addr = of_read_number(parser->range + 1, ns);
-+ cpu_addr = of_translate_address(parser->node,
-+ parser->range + na);
-+ size = of_read_number(parser->range + parser->pna + na, ns);
-+
-+ if (flags != range->flags)
-+ break;
-+ if (pci_addr != range->pci_addr + range->size ||
-+ cpu_addr != range->cpu_addr + range->size)
-+ break;
-+
-+ range->size += size;
-+ parser->range += parser->np;
-+ }
-+
-+ return range;
-+}
-+EXPORT_SYMBOL_GPL(of_pci_range_parser_one);
-+
- #endif /* CONFIG_PCI */
-
- /*
---- a/include/linux/of_address.h
-+++ b/include/linux/of_address.h
-@@ -4,6 +4,36 @@
- #include <linux/errno.h>
- #include <linux/of.h>
-
-+struct of_pci_range_parser {
-+ struct device_node *node;
-+ const __be32 *range;
-+ const __be32 *end;
-+ int np;
-+ int pna;
-+};
-+
-+struct of_pci_range {
-+ u32 pci_space;
-+ u64 pci_addr;
-+ u64 cpu_addr;
-+ u64 size;
-+ u32 flags;
-+};
-+
-+#define for_each_of_pci_range(parser, range) \
-+ for (; of_pci_range_parser_one(parser, range);)
-+
-+static inline void of_pci_range_to_resource(struct of_pci_range *range,
-+ struct device_node *np,
-+ struct resource *res)
-+{
-+ res->flags = range->flags;
-+ res->start = range->cpu_addr;
-+ res->end = range->cpu_addr + range->size - 1;
-+ res->parent = res->child = res->sibling = NULL;
-+ res->name = np->full_name;
-+}
-+
- #ifdef CONFIG_OF_ADDRESS
- extern u64 of_translate_address(struct device_node *np, const __be32 *addr);
- extern bool of_can_translate_address(struct device_node *dev);
-@@ -27,6 +57,11 @@ static inline unsigned long pci_address_
- #define pci_address_to_pio pci_address_to_pio
- #endif
-
-+extern int of_pci_range_parser_init(struct of_pci_range_parser *parser,
-+ struct device_node *node);
-+extern struct of_pci_range *of_pci_range_parser_one(
-+ struct of_pci_range_parser *parser,
-+ struct of_pci_range *range);
- #else /* CONFIG_OF_ADDRESS */
- #ifndef of_address_to_resource
- static inline int of_address_to_resource(struct device_node *dev, int index,
-@@ -53,6 +88,19 @@ static inline const __be32 *of_get_addre
- {
- return NULL;
- }
-+
-+static inline int of_pci_range_parser_init(struct of_pci_range_parser *parser,
-+ struct device_node *node)
-+{
-+ return -1;
-+}
-+
-+static inline struct of_pci_range *of_pci_range_parser_one(
-+ struct of_pci_range_parser *parser,
-+ struct of_pci_range *range)
-+{
-+ return NULL;
-+}
- #endif /* CONFIG_OF_ADDRESS */
-
-
diff --git a/target/linux/imx6/patches-3.10/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch b/target/linux/imx6/patches-3.10/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch
deleted file mode 100644
index 19ca079..0000000
--- a/target/linux/imx6/patches-3.10/0010-ARM-imx6q-Add-PCIe-bits-to-GPR-syscon-definition.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From: Sean Cross <xobs@kosagi.com>
-Subject: [PATCH 1/2] ARM: imx6q: Add PCIe bits to GPR syscon definition
-
-PCIe requires additional bits be defined for GPR8 and GPR12.
-
-Signed-off-by: Sean Cross <xobs@kosagi.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
----
- include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
-+++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
-@@ -241,6 +241,12 @@
-
- #define IMX6Q_GPR5_L2_CLK_STOP BIT(8)
-
-+#define IMX6Q_GPR8_TX_SWING_LOW (0x7f << 25)
-+#define IMX6Q_GPR8_TX_SWING_FULL (0x7f << 18)
-+#define IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB (0x3f << 12)
-+#define IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB (0x3f << 6)
-+#define IMX6Q_GPR8_TX_DEEMPH_GEN1 (0x3f << 0)
-+
- #define IMX6Q_GPR9_TZASC2_BYP BIT(1)
- #define IMX6Q_GPR9_TZASC1_BYP BIT(0)
-
-@@ -273,7 +279,9 @@
- #define IMX6Q_GPR12_ARMP_AHB_CLK_EN BIT(26)
- #define IMX6Q_GPR12_ARMP_ATB_CLK_EN BIT(25)
- #define IMX6Q_GPR12_ARMP_APB_CLK_EN BIT(24)
-+#define IMX6Q_GPR12_DEVICE_TYPE (0xf << 12)
- #define IMX6Q_GPR12_PCIE_CTL_2 BIT(10)
-+#define IMX6Q_GPR12_LOS_LEVEL (0x1f << 4)
-
- #define IMX6Q_GPR13_SDMA_STOP_REQ BIT(30)
- #define IMX6Q_GPR13_CAN2_STOP_REQ BIT(29)
diff --git a/target/linux/imx6/patches-3.10/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch b/target/linux/imx6/patches-3.10/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch
deleted file mode 100644
index 599cd0e..0000000
--- a/target/linux/imx6/patches-3.10/0011-PCI-imx6-Add-support-for-i.MX6-PCIe-controller.patch
+++ /dev/null
@@ -1,616 +0,0 @@
-Subject: [PATCH 2/2] PCI: imx6: Add support for i.MX6 PCIe controller
-From: Sean Cross <xobs@kosagi.com>
-
-Add support for the PCIe port present on the i.MX6 family of controllers.
-These use the Synopsis Designware core tied to their own PHY.
-
-Signed-off-by: Sean Cross <xobs@kosagi.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
----
- drivers/pci/host/Kconfig | 6 +
- drivers/pci/host/Makefile | 1 +
- drivers/pci/host/pci-imx6.c | 575 +++++++++++++++++++++
- 4 files changed, 588 insertions(+), 1 deletion(-)
- create mode 100644 drivers/pci/host/pci-imx6.c
-
---- /dev/null
-+++ b/drivers/pci/host/Kconfig
-@@ -0,0 +1,13 @@
-+menu "PCI host controller drivers"
-+ depends on PCI
-+
-+config PCIE_DW
-+ bool
-+
-+config PCI_IMX6
-+ bool "Freescale i.MX6 PCIe controller"
-+ depends on SOC_IMX6Q
-+ select PCIEPORTBUS
-+ select PCIE_DW
-+
-+endmenu
---- /dev/null
-+++ b/drivers/pci/host/Makefile
-@@ -0,0 +1,2 @@
-+obj-$(CONFIG_PCIE_DW) += pcie-designware.o
-+obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
---- /dev/null
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -0,0 +1,575 @@
-+/*
-+ * PCIe host controller driver for Freescale i.MX6 SoCs
-+ *
-+ * Copyright (C) 2013 Kosagi
-+ * http://www.kosagi.com
-+ *
-+ * Author: Sean Cross <xobs@kosagi.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/kernel.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-+#include <linux/module.h>
-+#include <linux/of_gpio.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/resource.h>
-+#include <linux/signal.h>
-+#include <linux/types.h>
-+
-+#include "pcie-designware.h"
-+
-+#define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp)
-+
-+struct imx6_pcie {
-+ int reset_gpio;
-+ int power_on_gpio;
-+ int wake_up_gpio;
-+ int disable_gpio;
-+ struct clk *lvds_gate;
-+ struct clk *sata_ref_100m;
-+ struct clk *pcie_ref_125m;
-+ struct clk *pcie_axi;
-+ struct pcie_port pp;
-+ struct regmap *iomuxc_gpr;
-+ void __iomem *mem_base;
-+};
-+
-+/* PCIe Port Logic registers (memory-mapped) */
-+#define PL_OFFSET 0x700
-+#define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
-+#define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
-+
-+#define PCIE_PHY_CTRL (PL_OFFSET + 0x114)
-+#define PCIE_PHY_CTRL_DATA_LOC 0
-+#define PCIE_PHY_CTRL_CAP_ADR_LOC 16
-+#define PCIE_PHY_CTRL_CAP_DAT_LOC 17
-+#define PCIE_PHY_CTRL_WR_LOC 18
-+#define PCIE_PHY_CTRL_RD_LOC 19
-+
-+#define PCIE_PHY_STAT (PL_OFFSET + 0x110)
-+#define PCIE_PHY_STAT_ACK_LOC 16
-+
-+/* PHY registers (not memory-mapped) */
-+#define PCIE_PHY_RX_ASIC_OUT 0x100D
-+
-+#define PHY_RX_OVRD_IN_LO 0x1005
-+#define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
-+#define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
-+
-+static int pcie_phy_poll_ack(void __iomem *dbi_base, int exp_val)
-+{
-+ u32 val;
-+ u32 max_iterations = 10;
-+ u32 wait_counter = 0;
-+
-+ do {
-+ val = readl(dbi_base + PCIE_PHY_STAT);
-+ val = (val >> PCIE_PHY_STAT_ACK_LOC) & 0x1;
-+ wait_counter++;
-+
-+ if (val == exp_val)
-+ return 0;
-+
-+ udelay(1);
-+ } while (wait_counter < max_iterations);
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static int pcie_phy_wait_ack(void __iomem *dbi_base, int addr)
-+{
-+ u32 val;
-+ int ret;
-+
-+ val = addr << PCIE_PHY_CTRL_DATA_LOC;
-+ writel(val, dbi_base + PCIE_PHY_CTRL);
-+
-+ val |= (0x1 << PCIE_PHY_CTRL_CAP_ADR_LOC);
-+ writel(val, dbi_base + PCIE_PHY_CTRL);
-+
-+ ret = pcie_phy_poll_ack(dbi_base, 1);
-+ if (ret)
-+ return ret;
-+
-+ val = addr << PCIE_PHY_CTRL_DATA_LOC;
-+ writel(val, dbi_base + PCIE_PHY_CTRL);
-+
-+ ret = pcie_phy_poll_ack(dbi_base, 0);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+/* Read from the 16-bit PCIe PHY control registers (not memory-mapped) */
-+static int pcie_phy_read(void __iomem *dbi_base, int addr , int *data)
-+{
-+ u32 val, phy_ctl;
-+ int ret;
-+
-+ ret = pcie_phy_wait_ack(dbi_base, addr);
-+ if (ret)
-+ return ret;
-+
-+ /* assert Read signal */
-+ phy_ctl = 0x1 << PCIE_PHY_CTRL_RD_LOC;
-+ writel(phy_ctl, dbi_base + PCIE_PHY_CTRL);
-+
-+ ret = pcie_phy_poll_ack(dbi_base, 1);
-+ if (ret)
-+ return ret;
-+
-+ val = readl(dbi_base + PCIE_PHY_STAT);
-+ *data = val & 0xffff;
-+
-+ /* deassert Read signal */
-+ writel(0x00, dbi_base + PCIE_PHY_CTRL);
-+
-+ ret = pcie_phy_poll_ack(dbi_base, 0);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int pcie_phy_write(void __iomem *dbi_base, int addr, int data)
-+{
-+ u32 var;
-+ int ret;
-+
-+ /* write addr */
-+ /* cap addr */
-+ ret = pcie_phy_wait_ack(dbi_base, addr);
-+ if (ret)
-+ return ret;
-+
-+ var = data << PCIE_PHY_CTRL_DATA_LOC;
-+ writel(var, dbi_base + PCIE_PHY_CTRL);
-+
-+ /* capture data */
-+ var |= (0x1 << PCIE_PHY_CTRL_CAP_DAT_LOC);
-+ writel(var, dbi_base + PCIE_PHY_CTRL);
-+
-+ ret = pcie_phy_poll_ack(dbi_base, 1);
-+ if (ret)
-+ return ret;
-+
-+ /* deassert cap data */
-+ var = data << PCIE_PHY_CTRL_DATA_LOC;
-+ writel(var, dbi_base + PCIE_PHY_CTRL);
-+
-+ /* wait for ack de-assertion */
-+ ret = pcie_phy_poll_ack(dbi_base, 0);
-+ if (ret)
-+ return ret;
-+
-+ /* assert wr signal */
-+ var = 0x1 << PCIE_PHY_CTRL_WR_LOC;
-+ writel(var, dbi_base + PCIE_PHY_CTRL);
-+
-+ /* wait for ack */
-+ ret = pcie_phy_poll_ack(dbi_base, 1);
-+ if (ret)
-+ return ret;
-+
-+ /* deassert wr signal */
-+ var = data << PCIE_PHY_CTRL_DATA_LOC;
-+ writel(var, dbi_base + PCIE_PHY_CTRL);
-+
-+ /* wait for ack de-assertion */
-+ ret = pcie_phy_poll_ack(dbi_base, 0);
-+ if (ret)
-+ return ret;
-+
-+ writel(0x0, dbi_base + PCIE_PHY_CTRL);
-+
-+ return 0;
-+}
-+
-+/* Added for PCI abort handling */
-+static int imx6q_pcie_abort_handler(unsigned long addr,
-+ unsigned int fsr, struct pt_regs *regs)
-+{
-+ /*
-+ * If it was an imprecise abort, then we need to correct the
-+ * return address to be _after_ the instruction.
-+ */
-+ if (fsr & (1 << 10))
-+ regs->ARM_pc += 4;
-+ return 0;
-+}
-+
-+static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
-+{
-+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+ IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16);
-+
-+ gpio_set_value(imx6_pcie->reset_gpio, 0);
-+ msleep(100);
-+ gpio_set_value(imx6_pcie->reset_gpio, 1);
-+
-+ return 0;
-+}
-+
-+static int imx6_pcie_deassert_core_reset(struct pcie_port *pp)
-+{
-+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+ int ret;
-+
-+ if (gpio_is_valid(imx6_pcie->power_on_gpio))
-+ gpio_set_value(imx6_pcie->power_on_gpio, 1);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+ IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
-+ IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
-+
-+ ret = clk_prepare_enable(imx6_pcie->sata_ref_100m);
-+ if (ret) {
-+ dev_err(pp->dev, "unable to enable sata_ref_100m\n");
-+ goto err_sata_ref;
-+ }
-+
-+ ret = clk_prepare_enable(imx6_pcie->pcie_ref_125m);
-+ if (ret) {
-+ dev_err(pp->dev, "unable to enable pcie_ref_125m\n");
-+ goto err_pcie_ref;
-+ }
-+
-+ ret = clk_prepare_enable(imx6_pcie->lvds_gate);
-+ if (ret) {
-+ dev_err(pp->dev, "unable to enable lvds_gate\n");
-+ goto err_lvds_gate;
-+ }
-+
-+ ret = clk_prepare_enable(imx6_pcie->pcie_axi);
-+ if (ret) {
-+ dev_err(pp->dev, "unable to enable pcie_axi\n");
-+ goto err_pcie_axi;
-+ }
-+
-+ /* allow the clocks to stabilize */
-+ usleep_range(200, 500);
-+
-+ return 0;
-+
-+err_pcie_axi:
-+ clk_disable_unprepare(imx6_pcie->lvds_gate);
-+err_lvds_gate:
-+ clk_disable_unprepare(imx6_pcie->pcie_ref_125m);
-+err_pcie_ref:
-+ clk_disable_unprepare(imx6_pcie->sata_ref_100m);
-+err_sata_ref:
-+ return ret;
-+
-+}
-+
-+static void imx6_pcie_init_phy(struct pcie_port *pp)
-+{
-+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
-+
-+ /* configure constant input signal to the pcie ctrl and phy */
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_DEVICE_TYPE, PCI_EXP_TYPE_ROOT_PORT << 12);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_LOS_LEVEL, 9 << 4);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-+ IMX6Q_GPR8_TX_DEEMPH_GEN1, 0 << 0);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-+ IMX6Q_GPR8_TX_DEEMPH_GEN2_3P5DB, 0 << 6);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-+ IMX6Q_GPR8_TX_DEEMPH_GEN2_6DB, 20 << 12);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-+ IMX6Q_GPR8_TX_SWING_FULL, 127 << 18);
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR8,
-+ IMX6Q_GPR8_TX_SWING_LOW, 127 << 25);
-+}
-+
-+static void imx6_pcie_host_init(struct pcie_port *pp)
-+{
-+ int count = 0;
-+ struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+
-+ imx6_pcie_assert_core_reset(pp);
-+
-+ imx6_pcie_init_phy(pp);
-+
-+ imx6_pcie_deassert_core_reset(pp);
-+
-+ dw_pcie_setup_rc(pp);
-+
-+ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+ IMX6Q_GPR12_PCIE_CTL_2, 1 << 10);
-+
-+ while (!dw_pcie_link_up(pp)) {
-+ usleep_range(100, 1000);
-+ count++;
-+ if (count >= 10) {
-+ dev_err(pp->dev, "phy link never came up\n");
-+ dev_dbg(pp->dev,
-+ "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
-+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
-+ readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
-+ break;
-+ }
-+ }
-+
-+ return;
-+}
-+
-+static int imx6_pcie_link_up(struct pcie_port *pp)
-+{
-+ u32 rc, ltssm, rx_valid, temp;
-+
-+ /* link is debug bit 36, debug register 1 starts at bit 32 */
-+ rc = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << (36 - 32));
-+ if (rc)
-+ return -EAGAIN;
-+
-+ /*
-+ * From L0, initiate MAC entry to gen2 if EP/RC supports gen2.
-+ * Wait 2ms (LTSSM timeout is 24ms, PHY lock is ~5us in gen2).
-+ * If (MAC/LTSSM.state == Recovery.RcvrLock)
-+ * && (PHY/rx_valid==0) then pulse PHY/rx_reset. Transition
-+ * to gen2 is stuck
-+ */
-+ pcie_phy_read(pp->dbi_base, PCIE_PHY_RX_ASIC_OUT, &rx_valid);
-+ ltssm = readl(pp->dbi_base + PCIE_PHY_DEBUG_R0) & 0x3F;
-+
-+ if (rx_valid & 0x01)
-+ return 0;
-+
-+ if (ltssm != 0x0d)
-+ return 0;
-+
-+ dev_err(pp->dev, "transition to gen2 is stuck, reset PHY!\n");
-+
-+ pcie_phy_read(pp->dbi_base,
-+ PHY_RX_OVRD_IN_LO, &temp);
-+ temp |= (PHY_RX_OVRD_IN_LO_RX_DATA_EN
-+ | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
-+ pcie_phy_write(pp->dbi_base,
-+ PHY_RX_OVRD_IN_LO, temp);
-+
-+ usleep_range(2000, 3000);
-+
-+ pcie_phy_read(pp->dbi_base,
-+ PHY_RX_OVRD_IN_LO, &temp);
-+ temp &= ~(PHY_RX_OVRD_IN_LO_RX_DATA_EN
-+ | PHY_RX_OVRD_IN_LO_RX_PLL_EN);
-+ pcie_phy_write(pp->dbi_base,
-+ PHY_RX_OVRD_IN_LO, temp);
-+
-+ return 0;
-+}
-+
-+static struct pcie_host_ops imx6_pcie_host_ops = {
-+ .link_up = imx6_pcie_link_up,
-+ .host_init = imx6_pcie_host_init,
-+};
-+
-+static int imx6_add_pcie_port(struct pcie_port *pp,
-+ struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ pp->irq = platform_get_irq(pdev, 0);
-+ if (!pp->irq) {
-+ dev_err(&pdev->dev, "failed to get irq\n");
-+ return -ENODEV;
-+ }
-+
-+ pp->root_bus_nr = -1;
-+ pp->ops = &imx6_pcie_host_ops;
-+
-+ spin_lock_init(&pp->conf_lock);
-+ ret = dw_pcie_host_init(pp);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to initialize host\n");
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int __init imx6_pcie_probe(struct platform_device *pdev)
-+{
-+ struct imx6_pcie *imx6_pcie;
-+ struct pcie_port *pp;
-+ struct device_node *np = pdev->dev.of_node;
-+ struct resource *dbi_base;
-+ int ret;
-+
-+ imx6_pcie = devm_kzalloc(&pdev->dev, sizeof(*imx6_pcie), GFP_KERNEL);
-+ if (!imx6_pcie)
-+ return -ENOMEM;
-+
-+ pp = &imx6_pcie->pp;
-+ pp->dev = &pdev->dev;
-+
-+ /* Added for PCI abort handling */
-+ hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0,
-+ "imprecise external abort");
-+
-+ dbi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!dbi_base) {
-+ dev_err(&pdev->dev, "dbi_base memory resource not found\n");
-+ return -ENODEV;
-+ }
-+
-+ pp->dbi_base = devm_ioremap_resource(&pdev->dev, dbi_base);
-+ if (IS_ERR(pp->dbi_base)) {
-+ dev_err(&pdev->dev, "unable to remap dbi_base\n");
-+ ret = PTR_ERR(pp->dbi_base);
-+ goto err;
-+ }
-+
-+ /* Fetch GPIOs */
-+ imx6_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
-+ if (!gpio_is_valid(imx6_pcie->reset_gpio)) {
-+ dev_err(&pdev->dev, "no reset-gpio defined\n");
-+ ret = -ENODEV;
-+ }
-+ ret = devm_gpio_request_one(&pdev->dev,
-+ imx6_pcie->reset_gpio,
-+ GPIOF_OUT_INIT_LOW,
-+ "PCIe reset");
-+ if (ret) {
-+ dev_err(&pdev->dev, "unable to get reset gpio\n");
-+ goto err;
-+ }
-+
-+ imx6_pcie->power_on_gpio = of_get_named_gpio(np, "power-on-gpio", 0);
-+ if (gpio_is_valid(imx6_pcie->power_on_gpio)) {
-+ ret = devm_gpio_request_one(&pdev->dev,
-+ imx6_pcie->power_on_gpio,
-+ GPIOF_OUT_INIT_LOW,
-+ "PCIe power enable");
-+ if (ret) {
-+ dev_err(&pdev->dev, "unable to get power-on gpio\n");
-+ goto err;
-+ }
-+ }
-+
-+ imx6_pcie->wake_up_gpio = of_get_named_gpio(np, "wake-up-gpio", 0);
-+ if (gpio_is_valid(imx6_pcie->wake_up_gpio)) {
-+ ret = devm_gpio_request_one(&pdev->dev,
-+ imx6_pcie->wake_up_gpio,
-+ GPIOF_IN,
-+ "PCIe wake up");
-+ if (ret) {
-+ dev_err(&pdev->dev, "unable to get wake-up gpio\n");
-+ goto err;
-+ }
-+ }
-+
-+ imx6_pcie->disable_gpio = of_get_named_gpio(np, "disable-gpio", 0);
-+ if (gpio_is_valid(imx6_pcie->disable_gpio)) {
-+ ret = devm_gpio_request_one(&pdev->dev,
-+ imx6_pcie->disable_gpio,
-+ GPIOF_OUT_INIT_HIGH,
-+ "PCIe disable endpoint");
-+ if (ret) {
-+ dev_err(&pdev->dev, "unable to get disable-ep gpio\n");
-+ goto err;
-+ }
-+ }
-+
-+ /* Fetch clocks */
-+ imx6_pcie->lvds_gate = devm_clk_get(&pdev->dev, "lvds_gate");
-+ if (IS_ERR(imx6_pcie->lvds_gate)) {
-+ dev_err(&pdev->dev,
-+ "lvds_gate clock select missing or invalid\n");
-+ ret = PTR_ERR(imx6_pcie->lvds_gate);
-+ goto err;
-+ }
-+
-+ imx6_pcie->sata_ref_100m = devm_clk_get(&pdev->dev, "sata_ref_100m");
-+ if (IS_ERR(imx6_pcie->sata_ref_100m)) {
-+ dev_err(&pdev->dev,
-+ "sata_ref_100m clock source missing or invalid\n");
-+ ret = PTR_ERR(imx6_pcie->sata_ref_100m);
-+ goto err;
-+ }
-+
-+ imx6_pcie->pcie_ref_125m = devm_clk_get(&pdev->dev, "pcie_ref_125m");
-+ if (IS_ERR(imx6_pcie->pcie_ref_125m)) {
-+ dev_err(&pdev->dev,
-+ "pcie_ref_125m clock source missing or invalid\n");
-+ ret = PTR_ERR(imx6_pcie->pcie_ref_125m);
-+ goto err;
-+ }
-+
-+ imx6_pcie->pcie_axi = devm_clk_get(&pdev->dev, "pcie_axi");
-+ if (IS_ERR(imx6_pcie->pcie_axi)) {
-+ dev_err(&pdev->dev,
-+ "pcie_axi clock source missing or invalid\n");
-+ ret = PTR_ERR(imx6_pcie->pcie_axi);
-+ goto err;
-+ }
-+
-+ /* Grab GPR config register range */
-+ imx6_pcie->iomuxc_gpr =
-+ syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
-+ if (IS_ERR(imx6_pcie->iomuxc_gpr)) {
-+ dev_err(&pdev->dev, "unable to find iomuxc registers\n");
-+ ret = PTR_ERR(imx6_pcie->iomuxc_gpr);
-+ goto err;
-+ }
-+
-+ ret = imx6_add_pcie_port(pp, pdev);
-+ if (ret < 0)
-+ goto err;
-+
-+ platform_set_drvdata(pdev, imx6_pcie);
-+ return 0;
-+
-+err:
-+ return ret;
-+}
-+
-+static const struct of_device_id imx6_pcie_of_match[] = {
-+ { .compatible = "fsl,imx6q-pcie", },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, imx6_pcie_of_match);
-+
-+static struct platform_driver imx6_pcie_driver = {
-+ .driver = {
-+ .name = "imx6q-pcie",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(imx6_pcie_of_match),
-+ },
-+};
-+
-+/* Freescale PCIe driver does not allow module unload */
-+
-+static int __init imx6_pcie_init(void)
-+{
-+ return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
-+}
-+module_init(imx6_pcie_init);
-+
-+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
-+MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/imx6/patches-3.10/0012-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch b/target/linux/imx6/patches-3.10/0012-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch
deleted file mode 100644
index 3f1b6eb..0000000
--- a/target/linux/imx6/patches-3.10/0012-ARM-imx-Add-LVDS-general-purpose-clocks-to-i.MX6Q.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: Sean Cross <xobs@kosagi.com>
-Subject: [PATCH 1/3] ARM: imx: Add LVDS general-purpose clocks to i.MX6Q
-
-The i.MX6 has two general-purpose LVDS clocks that can be driven
-from a variety of sources. This patch adds a mux and a gate for
-both of these clocks.
-
-Signed-off-by: Sean Cross <xobs@kosagi.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- .../devicetree/bindings/clock/imx6q-clock.txt | 4 ++++
- arch/arm/mach-imx/clk-imx6q.c | 20 +++++++++++++++++++-
- 2 files changed, 23 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
-+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
-@@ -208,6 +208,10 @@ clocks and IDs.
- pll4_post_div 193
- pll5_post_div 194
- pll5_video_div 195
-+ lvds1_sel 204
-+ lvds2_sel 205
-+ lvds1_gate 206
-+ lvds2_gate 207
-
- Examples:
-
---- a/arch/arm/mach-imx/clk-imx6q.c
-+++ b/arch/arm/mach-imx/clk-imx6q.c
-@@ -205,6 +205,11 @@ static const char *vpu_axi_sels[] = { "a
- static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
- "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
- "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_post_div", };
-+static const char *lvds_sels[] = {
-+ "dummy", "dummy", "dummy", "dummy", "dummy", "dummy",
-+ "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref",
-+ "pcie_ref", "sata_ref",
-+};
-
- enum mx6q_clks {
- dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
-@@ -238,7 +243,8 @@ enum mx6q_clks {
- pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
- sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
-- usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, clk_max
-+ usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div,
-+ lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max
- };
-
- static struct clk *clk[clk_max];
-@@ -340,6 +346,18 @@ int __init mx6q_clocks_init(void)
- base + 0xe0, 0, 2, 0, clk_enet_ref_table,
- &imx_ccm_lock);
-
-+ clk[lvds1_sel] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
-+ clk[lvds2_sel] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels));
-+
-+ /*
-+ * lvds1_gate and lvds2_gate are pseudo-gates. Both can be
-+ * independently configured as clock inputs or outputs. We treat
-+ * the "output_enable" bit as a gate, even though it's really just
-+ * enabling clock output.
-+ */
-+ clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10);
-+ clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11);
-+
- /* name parent_name reg idx */
- clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
- clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
diff --git a/target/linux/imx6/patches-3.10/0013-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch b/target/linux/imx6/patches-3.10/0013-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch
deleted file mode 100644
index 25f207a..0000000
--- a/target/linux/imx6/patches-3.10/0013-ARM-imx6q-clock-and-Kconfig-update-for-PCIe-support.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 4f6723e8ff497e35c8f2fb20886fccc533c58cdb Mon Sep 17 00:00:00 2001
-From: Sean Cross <xobs@kosagi.com>
-Date: Thu, 26 Sep 2013 10:45:35 +0800
-Subject: [PATCH] ARM: imx6q: clock and Kconfig update for PCIe support
-
-Update imx6q clock initialization and Kconfig for PCIe support.
-
-Signed-off-by: Sean Cross <xobs@kosagi.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/mach-imx/Kconfig | 2 ++
- arch/arm/mach-imx/clk-imx6q.c | 4 ++++
- 2 files changed, 6 insertions(+)
-
---- a/arch/arm/mach-imx/Kconfig
-+++ b/arch/arm/mach-imx/Kconfig
-@@ -806,6 +806,8 @@ config SOC_IMX6Q
- select HAVE_IMX_SRC
- select HAVE_SMP
- select MFD_SYSCON
-+ select MIGHT_HAVE_PCI
-+ select PCI_DOMAINS if PCI
- select PINCTRL
- select PINCTRL_IMX6Q
- select PL310_ERRATA_588369 if CACHE_PL310
---- a/arch/arm/mach-imx/clk-imx6q.c
-+++ b/arch/arm/mach-imx/clk-imx6q.c
-@@ -586,6 +586,10 @@ int __init mx6q_clocks_init(void)
- clk_prepare_enable(clk[usbphy2_gate]);
- }
-
-+ /* All existing boards with PCIe use LVDS1 */
-+ if (IS_ENABLED(CONFIG_PCI_IMX6))
-+ clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
-+
- /* Set initial power mode */
- imx6q_set_lpm(WAIT_CLOCKED);
-
diff --git a/target/linux/imx6/patches-3.10/0014-ARM-dts-imx6qdl-add-pcie-device-node.patch b/target/linux/imx6/patches-3.10/0014-ARM-dts-imx6qdl-add-pcie-device-node.patch
deleted file mode 100644
index e78d9ba..0000000
--- a/target/linux/imx6/patches-3.10/0014-ARM-dts-imx6qdl-add-pcie-device-node.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3a57291fa4ca7f7647d826f5b47082ef306d839f Mon Sep 17 00:00:00 2001
-From: Sean Cross <xobs@kosagi.com>
-Date: Thu, 26 Sep 2013 10:51:09 +0800
-Subject: [PATCH] ARM: dts: imx6qdl: add pcie device node
-
-Add pcie device node for imx6qdl.
-
-Signed-off-by: Sean Cross <xobs@kosagi.com>
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
----
- arch/arm/boot/dts/imx6qdl.dtsi | 16 ++++++++++++++++
- 1 file changed, 16 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -108,6 +108,22 @@
- cache-level = <2>;
- };
-
-+ pcie: pcie@0x01000000 {
-+ compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
-+ reg = <0x01ffc000 0x4000>; /* DBI */
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ ranges = <0x00000800 0 0x01f00000 0x01f00000 0 0x00080000 /* configuration space */
-+ 0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
-+ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
-+ num-lanes = <1>;
-+ interrupts = <0 123 0x04>;
-+ clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
-+ clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
-+ status = "disabled";
-+ };
-+
- pmu {
- compatible = "arm,cortex-a9-pmu";
- interrupts = <0 94 0x04>;
diff --git a/target/linux/imx6/patches-3.10/0015-thermal-add-imx-thermal-driver-support.patch b/target/linux/imx6/patches-3.10/0015-thermal-add-imx-thermal-driver-support.patch
deleted file mode 100644
index 0b7ac7d..0000000
--- a/target/linux/imx6/patches-3.10/0015-thermal-add-imx-thermal-driver-support.patch
+++ /dev/null
@@ -1,477 +0,0 @@
-From ca3de46b50809000b5ba708634e26ad979a4a63a Mon Sep 17 00:00:00 2001
-From: Shawn Guo <shawn.guo@linaro.org>
-Date: Mon, 24 Jun 2013 14:30:44 +0800
-Subject: [PATCH] thermal: add imx thermal driver support
-
-This is based on the initial imx thermal work done by
-Rob Lee <rob.lee@linaro.org> (Not sure if the email address is still
-valid). Since he is no longer interested in the work and I have
-rewritten a significant amount of the code, I just took the authorship
-over from him.
-
-It adds the imx thermal support using Temperature Monitor (TEMPMON)
-block found on some Freescale i.MX SoCs. The driver uses syscon regmap
-interface to access TEMPMON control registers and calibration data, and
-supports cpufreq as the cooling device.
-
-Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
----
- .../devicetree/bindings/thermal/imx-thermal.txt | 17 +
- drivers/thermal/Kconfig | 11 +
- drivers/thermal/Makefile | 1 +
- drivers/thermal/imx_thermal.c | 397 +++++++++++++++++++++
- 4 files changed, 426 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/thermal/imx-thermal.txt
- create mode 100644 drivers/thermal/imx_thermal.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
-@@ -0,0 +1,17 @@
-+* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
-+
-+Required properties:
-+- compatible : "fsl,imx6q-thermal"
-+- fsl,tempmon : phandle pointer to system controller that contains TEMPMON
-+ control registers, e.g. ANATOP on imx6q.
-+- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
-+ calibration data, e.g. OCOTP on imx6q. The details about calibration data
-+ can be found in SoC Reference Manual.
-+
-+Example:
-+
-+tempmon {
-+ compatible = "fsl,imx6q-tempmon";
-+ fsl,tempmon = <&anatop>;
-+ fsl,tempmon-data = <&ocotp>;
-+};
---- a/drivers/thermal/Kconfig
-+++ b/drivers/thermal/Kconfig
-@@ -91,6 +91,17 @@ config THERMAL_EMULATION
- because userland can easily disable the thermal policy by simply
- flooding this sysfs node with low temperature values.
-
-+config IMX_THERMAL
-+ tristate "Temperature sensor driver for Freescale i.MX SoCs"
-+ depends on CPU_THERMAL
-+ depends on MFD_SYSCON
-+ depends on OF
-+ help
-+ Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs.
-+ It supports one critical trip point and one passive trip point. The
-+ cpufreq is used as the cooling device to throttle CPUs when the
-+ passive trip is crossed.
-+
- config SPEAR_THERMAL
- bool "SPEAr thermal sensor driver"
- depends on PLAT_SPEAR
---- a/drivers/thermal/Makefile
-+++ b/drivers/thermal/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_EXYNOS_THERMAL) += exynos_t
- obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
- obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
- obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
-+obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
- obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
- obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
-
---- /dev/null
-+++ b/drivers/thermal/imx_thermal.c
-@@ -0,0 +1,397 @@
-+/*
-+ * Copyright 2013 Freescale Semiconductor, Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/cpu_cooling.h>
-+#include <linux/cpufreq.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+#include <linux/thermal.h>
-+#include <linux/types.h>
-+
-+#define REG_SET 0x4
-+#define REG_CLR 0x8
-+#define REG_TOG 0xc
-+
-+#define MISC0 0x0150
-+#define MISC0_REFTOP_SELBIASOFF (1 << 3)
-+
-+#define TEMPSENSE0 0x0180
-+#define TEMPSENSE0_TEMP_CNT_SHIFT 8
-+#define TEMPSENSE0_TEMP_CNT_MASK (0xfff << TEMPSENSE0_TEMP_CNT_SHIFT)
-+#define TEMPSENSE0_FINISHED (1 << 2)
-+#define TEMPSENSE0_MEASURE_TEMP (1 << 1)
-+#define TEMPSENSE0_POWER_DOWN (1 << 0)
-+
-+#define TEMPSENSE1 0x0190
-+#define TEMPSENSE1_MEASURE_FREQ 0xffff
-+
-+#define OCOTP_ANA1 0x04e0
-+
-+/* The driver supports 1 passive trip point and 1 critical trip point */
-+enum imx_thermal_trip {
-+ IMX_TRIP_PASSIVE,
-+ IMX_TRIP_CRITICAL,
-+ IMX_TRIP_NUM,
-+};
-+
-+/*
-+ * It defines the temperature in millicelsius for passive trip point
-+ * that will trigger cooling action when crossed.
-+ */
-+#define IMX_TEMP_PASSIVE 85000
-+
-+/*
-+ * The maximum die temperature on imx parts is 105C, let's give some cushion
-+ * for noise and possible temperature rise between measurements.
-+ */
-+#define IMX_TEMP_CRITICAL 100000
-+
-+#define IMX_POLLING_DELAY 2000 /* millisecond */
-+#define IMX_PASSIVE_DELAY 1000
-+
-+struct imx_thermal_data {
-+ struct thermal_zone_device *tz;
-+ struct thermal_cooling_device *cdev;
-+ enum thermal_device_mode mode;
-+ struct regmap *tempmon;
-+ int c1, c2; /* See formula in imx_get_sensor_data() */
-+};
-+
-+static int imx_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
-+{
-+ struct imx_thermal_data *data = tz->devdata;
-+ struct regmap *map = data->tempmon;
-+ static unsigned long last_temp;
-+ unsigned int n_meas;
-+ u32 val;
-+
-+ /*
-+ * Every time we measure the temperature, we will power on the
-+ * temperature sensor, enable measurements, take a reading,
-+ * disable measurements, power off the temperature sensor.
-+ */
-+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
-+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
-+
-+ /*
-+ * According to the temp sensor designers, it may require up to ~17us
-+ * to complete a measurement.
-+ */
-+ usleep_range(20, 50);
-+
-+ regmap_read(map, TEMPSENSE0, &val);
-+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
-+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
-+
-+ if ((val & TEMPSENSE0_FINISHED) == 0) {
-+ dev_dbg(&tz->device, "temp measurement never finished\n");
-+ return -EAGAIN;
-+ }
-+
-+ n_meas = (val & TEMPSENSE0_TEMP_CNT_MASK) >> TEMPSENSE0_TEMP_CNT_SHIFT;
-+
-+ /* See imx_get_sensor_data() for formula derivation */
-+ *temp = data->c2 + data->c1 * n_meas;
-+
-+ if (*temp != last_temp) {
-+ dev_dbg(&tz->device, "millicelsius: %ld\n", *temp);
-+ last_temp = *temp;
-+ }
-+
-+ return 0;
-+}
-+
-+static int imx_get_mode(struct thermal_zone_device *tz,
-+ enum thermal_device_mode *mode)
-+{
-+ struct imx_thermal_data *data = tz->devdata;
-+
-+ *mode = data->mode;
-+
-+ return 0;
-+}
-+
-+static int imx_set_mode(struct thermal_zone_device *tz,
-+ enum thermal_device_mode mode)
-+{
-+ struct imx_thermal_data *data = tz->devdata;
-+
-+ if (mode == THERMAL_DEVICE_ENABLED) {
-+ tz->polling_delay = IMX_POLLING_DELAY;
-+ tz->passive_delay = IMX_PASSIVE_DELAY;
-+ } else {
-+ tz->polling_delay = 0;
-+ tz->passive_delay = 0;
-+ }
-+
-+ data->mode = mode;
-+ thermal_zone_device_update(tz);
-+
-+ return 0;
-+}
-+
-+static int imx_get_trip_type(struct thermal_zone_device *tz, int trip,
-+ enum thermal_trip_type *type)
-+{
-+ *type = (trip == IMX_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
-+ THERMAL_TRIP_CRITICAL;
-+ return 0;
-+}
-+
-+static int imx_get_crit_temp(struct thermal_zone_device *tz,
-+ unsigned long *temp)
-+{
-+ *temp = IMX_TEMP_CRITICAL;
-+ return 0;
-+}
-+
-+static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip,
-+ unsigned long *temp)
-+{
-+ *temp = (trip == IMX_TRIP_PASSIVE) ? IMX_TEMP_PASSIVE :
-+ IMX_TEMP_CRITICAL;
-+ return 0;
-+}
-+
-+static int imx_bind(struct thermal_zone_device *tz,
-+ struct thermal_cooling_device *cdev)
-+{
-+ int ret;
-+
-+ ret = thermal_zone_bind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev,
-+ THERMAL_NO_LIMIT,
-+ THERMAL_NO_LIMIT);
-+ if (ret) {
-+ dev_err(&tz->device,
-+ "binding zone %s with cdev %s failed:%d\n",
-+ tz->type, cdev->type, ret);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int imx_unbind(struct thermal_zone_device *tz,
-+ struct thermal_cooling_device *cdev)
-+{
-+ int ret;
-+
-+ ret = thermal_zone_unbind_cooling_device(tz, IMX_TRIP_PASSIVE, cdev);
-+ if (ret) {
-+ dev_err(&tz->device,
-+ "unbinding zone %s with cdev %s failed:%d\n",
-+ tz->type, cdev->type, ret);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct thermal_zone_device_ops imx_tz_ops = {
-+ .bind = imx_bind,
-+ .unbind = imx_unbind,
-+ .get_temp = imx_get_temp,
-+ .get_mode = imx_get_mode,
-+ .set_mode = imx_set_mode,
-+ .get_trip_type = imx_get_trip_type,
-+ .get_trip_temp = imx_get_trip_temp,
-+ .get_crit_temp = imx_get_crit_temp,
-+};
-+
-+static int imx_get_sensor_data(struct platform_device *pdev)
-+{
-+ struct imx_thermal_data *data = platform_get_drvdata(pdev);
-+ struct regmap *map;
-+ int t1, t2, n1, n2;
-+ int ret;
-+ u32 val;
-+
-+ map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+ "fsl,tempmon-data");
-+ if (IS_ERR(map)) {
-+ ret = PTR_ERR(map);
-+ dev_err(&pdev->dev, "failed to get sensor regmap: %d\n", ret);
-+ return ret;
-+ }
-+
-+ ret = regmap_read(map, OCOTP_ANA1, &val);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to read sensor data: %d\n", ret);
-+ return ret;
-+ }
-+
-+ if (val == 0 || val == ~0) {
-+ dev_err(&pdev->dev, "invalid sensor calibration data\n");
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * Sensor data layout:
-+ * [31:20] - sensor value @ 25C
-+ * [19:8] - sensor value of hot
-+ * [7:0] - hot temperature value
-+ */
-+ n1 = val >> 20;
-+ n2 = (val & 0xfff00) >> 8;
-+ t2 = val & 0xff;
-+ t1 = 25; /* t1 always 25C */
-+
-+ /*
-+ * Derived from linear interpolation,
-+ * Tmeas = T2 + (Nmeas - N2) * (T1 - T2) / (N1 - N2)
-+ * We want to reduce this down to the minimum computation necessary
-+ * for each temperature read. Also, we want Tmeas in millicelsius
-+ * and we don't want to lose precision from integer division. So...
-+ * milli_Tmeas = 1000 * T2 + 1000 * (Nmeas - N2) * (T1 - T2) / (N1 - N2)
-+ * Let constant c1 = 1000 * (T1 - T2) / (N1 - N2)
-+ * milli_Tmeas = (1000 * T2) + c1 * (Nmeas - N2)
-+ * milli_Tmeas = (1000 * T2) + (c1 * Nmeas) - (c1 * N2)
-+ * Let constant c2 = (1000 * T2) - (c1 * N2)
-+ * milli_Tmeas = c2 + (c1 * Nmeas)
-+ */
-+ data->c1 = 1000 * (t1 - t2) / (n1 - n2);
-+ data->c2 = 1000 * t2 - data->c1 * n2;
-+
-+ return 0;
-+}
-+
-+static int imx_thermal_probe(struct platform_device *pdev)
-+{
-+ struct imx_thermal_data *data;
-+ struct cpumask clip_cpus;
-+ struct regmap *map;
-+ int ret;
-+
-+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-+ if (!data)
-+ return -ENOMEM;
-+
-+ map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "fsl,tempmon");
-+ if (IS_ERR(map)) {
-+ ret = PTR_ERR(map);
-+ dev_err(&pdev->dev, "failed to get tempmon regmap: %d\n", ret);
-+ return ret;
-+ }
-+ data->tempmon = map;
-+
-+ platform_set_drvdata(pdev, data);
-+
-+ ret = imx_get_sensor_data(pdev);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to get sensor data\n");
-+ return ret;
-+ }
-+
-+ /* Make sure sensor is in known good state for measurements */
-+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
-+ regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_MEASURE_TEMP);
-+ regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
-+ regmap_write(map, MISC0 + REG_SET, MISC0_REFTOP_SELBIASOFF);
-+ regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
-+
-+ cpumask_set_cpu(0, &clip_cpus);
-+ data->cdev = cpufreq_cooling_register(&clip_cpus);
-+ if (IS_ERR(data->cdev)) {
-+ ret = PTR_ERR(data->cdev);
-+ dev_err(&pdev->dev,
-+ "failed to register cpufreq cooling device: %d\n", ret);
-+ return ret;
-+ }
-+
-+ data->tz = thermal_zone_device_register("imx_thermal_zone",
-+ IMX_TRIP_NUM, 0, data,
-+ &imx_tz_ops, NULL,
-+ IMX_PASSIVE_DELAY,
-+ IMX_POLLING_DELAY);
-+ if (IS_ERR(data->tz)) {
-+ ret = PTR_ERR(data->tz);
-+ dev_err(&pdev->dev,
-+ "failed to register thermal zone device %d\n", ret);
-+ cpufreq_cooling_unregister(data->cdev);
-+ return ret;
-+ }
-+
-+ data->mode = THERMAL_DEVICE_ENABLED;
-+
-+ return 0;
-+}
-+
-+static int imx_thermal_remove(struct platform_device *pdev)
-+{
-+ struct imx_thermal_data *data = platform_get_drvdata(pdev);
-+
-+ thermal_zone_device_unregister(data->tz);
-+ cpufreq_cooling_unregister(data->cdev);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM_SLEEP
-+static int imx_thermal_suspend(struct device *dev)
-+{
-+ struct imx_thermal_data *data = dev_get_drvdata(dev);
-+ struct regmap *map = data->tempmon;
-+ u32 val;
-+
-+ regmap_read(map, TEMPSENSE0, &val);
-+ if ((val & TEMPSENSE0_POWER_DOWN) == 0) {
-+ /*
-+ * If a measurement is taking place, wait for a long enough
-+ * time for it to finish, and then check again. If it still
-+ * does not finish, something must go wrong.
-+ */
-+ udelay(50);
-+ regmap_read(map, TEMPSENSE0, &val);
-+ if ((val & TEMPSENSE0_POWER_DOWN) == 0)
-+ return -ETIMEDOUT;
-+ }
-+
-+ return 0;
-+}
-+
-+static int imx_thermal_resume(struct device *dev)
-+{
-+ /* Nothing to do for now */
-+ return 0;
-+}
-+#endif
-+
-+static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops,
-+ imx_thermal_suspend, imx_thermal_resume);
-+
-+static const struct of_device_id of_imx_thermal_match[] = {
-+ { .compatible = "fsl,imx6q-tempmon", },
-+ { /* end */ }
-+};
-+
-+static struct platform_driver imx_thermal = {
-+ .driver = {
-+ .name = "imx_thermal",
-+ .owner = THIS_MODULE,
-+ .pm = &imx_thermal_pm_ops,
-+ .of_match_table = of_imx_thermal_match,
-+ },
-+ .probe = imx_thermal_probe,
-+ .remove = imx_thermal_remove,
-+};
-+module_platform_driver(imx_thermal);
-+
-+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
-+MODULE_DESCRIPTION("Thermal driver for Freescale i.MX SoCs");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:imx-thermal");
diff --git a/target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch b/target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch
deleted file mode 100644
index cbce5e7..0000000
--- a/target/linux/imx6/patches-3.10/0019-regulator-pfuze100-add-pfuze100-regulator-driver.patch
+++ /dev/null
@@ -1,667 +0,0 @@
-From 3784b6d64dc52ed3fbebad61a85ab9b7a687a167 Mon Sep 17 00:00:00 2001
-From: Robin Gong <b38343@freescale.com>
-Date: Thu, 25 Jul 2013 11:33:18 +0800
-Subject: [PATCH] regulator: pfuze100: add pfuze100 regulator driver
-
-Add pfuze100 regulator driver.
-
-Signed-off-by: Robin Gong <b38343@freescale.com>
-Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- .../devicetree/bindings/regulator/pfuze100.txt | 113 +++++
- drivers/regulator/Kconfig | 7 +
- drivers/regulator/Makefile | 1 +
- drivers/regulator/pfuze100-regulator.c | 454 +++++++++++++++++++++
- include/linux/regulator/pfuze100.h | 44 ++
- 5 files changed, 619 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/regulator/pfuze100.txt
- create mode 100644 drivers/regulator/pfuze100-regulator.c
- create mode 100644 include/linux/regulator/pfuze100.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
-@@ -0,0 +1,113 @@
-+PFUZE100 family of regulators
-+
-+Required properties:
-+- compatible: "fsl,pfuze100"
-+- reg: I2C slave address
-+- regulators: This is the list of child nodes that specify the regulator
-+ initialization data for defined regulators. Please refer to below doc
-+ Documentation/devicetree/bindings/regulator/regulator.txt.
-+
-+ The valid names for regulators are:
-+ sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6
-+
-+Each regulator is defined using the standard binding for regulators.
-+
-+Example:
-+
-+ pmic: pfuze100@08 {
-+ compatible = "fsl,pfuze100";
-+ reg = <0x08>;
-+
-+ regulators {
-+ sw1a_reg: sw1ab {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ regulator-ramp-delay = <6250>;
-+ };
-+
-+ sw1c_reg: sw1c {
-+ regulator-min-microvolt = <300000>;
-+ regulator-max-microvolt = <1875000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw2_reg: sw2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3a_reg: sw3a {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw3b_reg: sw3b {
-+ regulator-min-microvolt = <400000>;
-+ regulator-max-microvolt = <1975000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ sw4_reg: sw4 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ swbst_reg: swbst {
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5150000>;
-+ };
-+
-+ snvs_reg: vsnvs {
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vref_reg: vrefddr {
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ vgen1_reg: vgen1 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen2_reg: vgen2 {
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1550000>;
-+ };
-+
-+ vgen3_reg: vgen3 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ vgen4_reg: vgen4 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen5_reg: vgen5 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vgen6_reg: vgen6 {
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+ };
-+ };
---- a/drivers/regulator/Kconfig
-+++ b/drivers/regulator/Kconfig
-@@ -300,6 +300,13 @@ config REGULATOR_PCF50633
- Say Y here to support the voltage regulators and convertors
- on PCF50633
-
-+config REGULATOR_PFUZE100
-+ tristate "Support regulators on Freescale PFUZE100 PMIC"
-+ depends on I2C
-+ help
-+ Say y here to support the regulators found on the Freescale PFUZE100
-+ PMIC.
-+
- config REGULATOR_RC5T583
- tristate "RICOH RC5T583 Power regulators"
- depends on MFD_RC5T583
---- a/drivers/regulator/Makefile
-+++ b/drivers/regulator/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc137
- obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
- obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
- obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
-+obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
- obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
- obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
- obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
---- /dev/null
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -0,0 +1,454 @@
-+/*
-+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/err.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/regulator/of_regulator.h>
-+#include <linux/platform_device.h>
-+#include <linux/regulator/driver.h>
-+#include <linux/regulator/machine.h>
-+#include <linux/regulator/pfuze100.h>
-+#include <linux/i2c.h>
-+#include <linux/slab.h>
-+#include <linux/regmap.h>
-+
-+#define PFUZE_NUMREGS 128
-+#define PFUZE100_VOL_OFFSET 0
-+#define PFUZE100_STANDBY_OFFSET 1
-+#define PFUZE100_MODE_OFFSET 3
-+#define PFUZE100_CONF_OFFSET 4
-+
-+#define PFUZE100_DEVICEID 0x0
-+#define PFUZE100_REVID 0x3
-+#define PFUZE100_FABID 0x3
-+
-+#define PFUZE100_SW1ABVOL 0x20
-+#define PFUZE100_SW1CVOL 0x2e
-+#define PFUZE100_SW2VOL 0x35
-+#define PFUZE100_SW3AVOL 0x3c
-+#define PFUZE100_SW3BVOL 0x43
-+#define PFUZE100_SW4VOL 0x4a
-+#define PFUZE100_SWBSTCON1 0x66
-+#define PFUZE100_VREFDDRCON 0x6a
-+#define PFUZE100_VSNVSVOL 0x6b
-+#define PFUZE100_VGEN1VOL 0x6c
-+#define PFUZE100_VGEN2VOL 0x6d
-+#define PFUZE100_VGEN3VOL 0x6e
-+#define PFUZE100_VGEN4VOL 0x6f
-+#define PFUZE100_VGEN5VOL 0x70
-+#define PFUZE100_VGEN6VOL 0x71
-+
-+struct pfuze_regulator {
-+ struct regulator_desc desc;
-+ unsigned char stby_reg;
-+ unsigned char stby_mask;
-+};
-+
-+struct pfuze_chip {
-+ struct regmap *regmap;
-+ struct device *dev;
-+ struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
-+ struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR];
-+};
-+
-+static const int pfuze100_swbst[] = {
-+ 5000000, 5050000, 5100000, 5150000,
-+};
-+
-+static const int pfuze100_vsnvs[] = {
-+ 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000,
-+};
-+
-+static const struct i2c_device_id pfuze_device_id[] = {
-+ {.name = "pfuze100"},
-+ {},
-+};
-+MODULE_DEVICE_TABLE(i2c, pfuze_device_id);
-+
-+static const struct of_device_id pfuze_dt_ids[] = {
-+ { .compatible = "fsl,pfuze100" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, pfuze_dt_ids);
-+
-+static int pfuze100_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
-+{
-+ struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
-+ int id = rdev->desc->id;
-+ unsigned int val, ramp_bits, reg;
-+ int ret;
-+
-+ if (id < PFUZE100_SWBST) {
-+ if (id == PFUZE100_SW1AB)
-+ reg = PFUZE100_SW1ABVOL;
-+ else
-+ reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
-+ regmap_read(pfuze100->regmap, reg, &val);
-+
-+ if (id <= PFUZE100_SW1C)
-+ ramp_delay = 25000 / (2 * ramp_delay);
-+ else if (val & 0x40)
-+ ramp_delay = 50000 / (4 * ramp_delay);
-+ else
-+ ramp_delay = 25000 / (2 * ramp_delay);
-+
-+ ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
-+ ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
-+ ramp_bits << 6);
-+ if (ret < 0)
-+ dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
-+ } else
-+ ret = -EACCES;
-+
-+ return ret;
-+}
-+
-+static struct regulator_ops pfuze100_ldo_regulator_ops = {
-+ .enable = regulator_enable_regmap,
-+ .disable = regulator_disable_regmap,
-+ .is_enabled = regulator_is_enabled_regmap,
-+ .list_voltage = regulator_list_voltage_linear,
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+};
-+
-+static struct regulator_ops pfuze100_fixed_regulator_ops = {
-+ .list_voltage = regulator_list_voltage_linear,
-+};
-+
-+static struct regulator_ops pfuze100_sw_regulator_ops = {
-+ .list_voltage = regulator_list_voltage_linear,
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
-+ .set_ramp_delay = pfuze100_set_ramp_delay,
-+};
-+
-+static struct regulator_ops pfuze100_swb_regulator_ops = {
-+ .list_voltage = regulator_list_voltage_table,
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+
-+};
-+
-+#define PFUZE100_FIXED_REG(_name, base, voltage) \
-+ [PFUZE100_ ## _name] = { \
-+ .desc = { \
-+ .name = #_name, \
-+ .n_voltages = 1, \
-+ .ops = &pfuze100_fixed_regulator_ops, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = PFUZE100_ ## _name, \
-+ .owner = THIS_MODULE, \
-+ .min_uV = (voltage), \
-+ .enable_reg = (base), \
-+ .enable_mask = 0x10, \
-+ }, \
-+ }
-+
-+#define PFUZE100_SW_REG(_name, base, min, max, step) \
-+ [PFUZE100_ ## _name] = { \
-+ .desc = { \
-+ .name = #_name,\
-+ .n_voltages = ((max) - (min)) / (step) + 1, \
-+ .ops = &pfuze100_sw_regulator_ops, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = PFUZE100_ ## _name, \
-+ .owner = THIS_MODULE, \
-+ .min_uV = (min), \
-+ .uV_step = (step), \
-+ .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \
-+ .vsel_mask = 0x3f, \
-+ }, \
-+ .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \
-+ .stby_mask = 0x3f, \
-+ }
-+
-+#define PFUZE100_SWB_REG(_name, base, mask, voltages) \
-+ [PFUZE100_ ## _name] = { \
-+ .desc = { \
-+ .name = #_name, \
-+ .n_voltages = ARRAY_SIZE(voltages), \
-+ .ops = &pfuze100_swb_regulator_ops, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = PFUZE100_ ## _name, \
-+ .owner = THIS_MODULE, \
-+ .volt_table = voltages, \
-+ .vsel_reg = (base), \
-+ .vsel_mask = (mask), \
-+ }, \
-+ }
-+
-+#define PFUZE100_VGEN_REG(_name, base, min, max, step) \
-+ [PFUZE100_ ## _name] = { \
-+ .desc = { \
-+ .name = #_name, \
-+ .n_voltages = ((max) - (min)) / (step) + 1, \
-+ .ops = &pfuze100_ldo_regulator_ops, \
-+ .type = REGULATOR_VOLTAGE, \
-+ .id = PFUZE100_ ## _name, \
-+ .owner = THIS_MODULE, \
-+ .min_uV = (min), \
-+ .uV_step = (step), \
-+ .vsel_reg = (base), \
-+ .vsel_mask = 0xf, \
-+ .enable_reg = (base), \
-+ .enable_mask = 0x10, \
-+ }, \
-+ .stby_reg = (base), \
-+ .stby_mask = 0x20, \
-+ }
-+
-+static struct pfuze_regulator pfuze100_regulators[] = {
-+ PFUZE100_SW_REG(SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000),
-+ PFUZE100_SW_REG(SW1C, PFUZE100_SW1CVOL, 300000, 1875000, 25000),
-+ PFUZE100_SW_REG(SW2, PFUZE100_SW2VOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(SW3A, PFUZE100_SW3AVOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(SW3B, PFUZE100_SW3BVOL, 400000, 1975000, 25000),
-+ PFUZE100_SW_REG(SW4, PFUZE100_SW4VOL, 400000, 1975000, 25000),
-+ PFUZE100_SWB_REG(SWBST, PFUZE100_SWBSTCON1, 0x3 , pfuze100_swbst),
-+ PFUZE100_SWB_REG(VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs),
-+ PFUZE100_FIXED_REG(VREFDDR, PFUZE100_VREFDDRCON, 750000),
-+ PFUZE100_VGEN_REG(VGEN1, PFUZE100_VGEN1VOL, 800000, 1550000, 50000),
-+ PFUZE100_VGEN_REG(VGEN2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000),
-+ PFUZE100_VGEN_REG(VGEN3, PFUZE100_VGEN3VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(VGEN4, PFUZE100_VGEN4VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(VGEN5, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000),
-+ PFUZE100_VGEN_REG(VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
-+};
-+
-+#ifdef CONFIG_OF
-+static struct of_regulator_match pfuze100_matches[] = {
-+ { .name = "sw1ab", },
-+ { .name = "sw1c", },
-+ { .name = "sw2", },
-+ { .name = "sw3a", },
-+ { .name = "sw3b", },
-+ { .name = "sw4", },
-+ { .name = "swbst", },
-+ { .name = "vsnvs", },
-+ { .name = "vrefddr", },
-+ { .name = "vgen1", },
-+ { .name = "vgen2", },
-+ { .name = "vgen3", },
-+ { .name = "vgen4", },
-+ { .name = "vgen5", },
-+ { .name = "vgen6", },
-+};
-+
-+static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
-+{
-+ struct device *dev = chip->dev;
-+ struct device_node *np, *parent;
-+ int ret;
-+
-+ np = of_node_get(dev->parent->of_node);
-+ if (!np)
-+ return 0;
-+
-+ parent = of_find_node_by_name(np, "regulators");
-+ if (!parent) {
-+ dev_err(dev, "regulators node not found\n");
-+ return -EINVAL;
-+ }
-+
-+ ret = of_regulator_match(dev, parent, pfuze100_matches,
-+ ARRAY_SIZE(pfuze100_matches));
-+
-+ of_node_put(parent);
-+ if (ret < 0) {
-+ dev_err(dev, "Error parsing regulator init data: %d\n",
-+ ret);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static inline struct regulator_init_data *match_init_data(int index)
-+{
-+ return pfuze100_matches[index].init_data;
-+}
-+
-+static inline struct device_node *match_of_node(int index)
-+{
-+ return pfuze100_matches[index].of_node;
-+}
-+#else
-+static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
-+{
-+ return NULL;
-+}
-+
-+static inline struct regulator_init_data *match_init_data(int index)
-+{
-+ return NULL;
-+}
-+
-+static inline struct device_node *match_of_node(int index)
-+{
-+ return NULL;
-+}
-+#endif
-+
-+static int pfuze_identify(struct pfuze_chip *pfuze_chip)
-+{
-+ unsigned int value;
-+ int ret;
-+
-+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_DEVICEID, &value);
-+ if (ret)
-+ return ret;
-+
-+ if (value & 0x0f) {
-+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
-+ return -ENODEV;
-+ }
-+
-+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
-+ if (ret)
-+ return ret;
-+ dev_info(pfuze_chip->dev,
-+ "Full lay: %x, Metal lay: %x\n",
-+ (value & 0xf0) >> 4, value & 0x0f);
-+
-+ ret = regmap_read(pfuze_chip->regmap, PFUZE100_FABID, &value);
-+ if (ret)
-+ return ret;
-+ dev_info(pfuze_chip->dev, "FAB: %x, FIN: %x\n",
-+ (value & 0xc) >> 2, value & 0x3);
-+
-+ return 0;
-+}
-+
-+static const struct regmap_config pfuze_regmap_config = {
-+ .reg_bits = 8,
-+ .val_bits = 8,
-+ .max_register = PFUZE_NUMREGS,
-+ .cache_type = REGCACHE_RBTREE,
-+};
-+
-+static int pfuze100_regulator_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct pfuze_chip *pfuze_chip;
-+ struct pfuze_regulator_platform_data *pdata =
-+ dev_get_platdata(&client->dev);
-+ struct regulator_config config = { };
-+ int i, ret;
-+
-+ pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip),
-+ GFP_KERNEL);
-+ if (!pfuze_chip)
-+ return -ENOMEM;
-+
-+ dev_set_drvdata(&client->dev, pfuze_chip);
-+
-+ memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
-+ sizeof(pfuze_chip->regulator_descs));
-+
-+ pfuze_chip->dev = &client->dev;
-+
-+ pfuze_chip->regmap = devm_regmap_init_i2c(client, &pfuze_regmap_config);
-+ if (IS_ERR(pfuze_chip->regmap)) {
-+ ret = PTR_ERR(pfuze_chip->regmap);
-+ dev_err(&client->dev,
-+ "regmap allocation failed with err %d\n", ret);
-+ return ret;
-+ }
-+
-+ ret = pfuze_identify(pfuze_chip);
-+ if (ret) {
-+ dev_err(&client->dev, "unrecognized pfuze chip ID!\n");
-+ return ret;
-+ }
-+
-+ ret = pfuze_parse_regulators_dt(pfuze_chip);
-+ if (ret)
-+ return ret;
-+
-+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
-+ struct regulator_init_data *init_data;
-+ int val;
-+
-+ if (pdata)
-+ init_data = pdata->init_data[i];
-+ else
-+ init_data = match_init_data(i);
-+
-+ /* SW2~SW4 high bit check and modify the voltage value table */
-+ if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
-+ regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL +
-+ (i - PFUZE100_SW2) * 7, &val);
-+ if (val & 0x40) {
-+ pfuze_chip->regulator_descs[i].desc.min_uV
-+ = 800000;
-+ pfuze_chip->regulator_descs[i].desc.uV_step
-+ = 50000;
-+ }
-+ }
-+
-+ config.dev = &client->dev;
-+ config.init_data = init_data;
-+ config.driver_data = pfuze_chip;
-+ config.of_node = match_of_node(i);
-+
-+ pfuze_chip->regulators[i] = regulator_register(&pfuze_chip
-+ ->regulator_descs[i].desc, &config);
-+ if (IS_ERR(pfuze_chip->regulators[i])) {
-+ dev_err(&client->dev, "register regulator%s failed\n",
-+ pfuze100_regulators[i].desc.name);
-+ ret = PTR_ERR(pfuze_chip->regulators[i]);
-+ while (--i >= 0)
-+ regulator_unregister(pfuze_chip->regulators[i]);
-+ return ret;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int pfuze100_regulator_remove(struct i2c_client *client)
-+{
-+ int i;
-+ struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev);
-+
-+ for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
-+ regulator_unregister(pfuze_chip->regulators[i]);
-+
-+ return 0;
-+}
-+
-+static struct i2c_driver pfuze_driver = {
-+ .id_table = pfuze_device_id,
-+ .driver = {
-+ .name = "pfuze100-regulator",
-+ .owner = THIS_MODULE,
-+ .of_match_table = pfuze_dt_ids,
-+ },
-+ .probe = pfuze100_regulator_probe,
-+ .remove = pfuze100_regulator_remove,
-+};
-+module_i2c_driver(pfuze_driver);
-+
-+MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
-+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
-+MODULE_ALIAS("pfuze100-regulator");
---- /dev/null
-+++ b/include/linux/regulator/pfuze100.h
-@@ -0,0 +1,44 @@
-+/*
-+ * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-+ */
-+#ifndef __LINUX_REG_PFUZE100_H
-+#define __LINUX_REG_PFUZE100_H
-+
-+#define PFUZE100_SW1AB 0
-+#define PFUZE100_SW1C 1
-+#define PFUZE100_SW2 2
-+#define PFUZE100_SW3A 3
-+#define PFUZE100_SW3B 4
-+#define PFUZE100_SW4 5
-+#define PFUZE100_SWBST 6
-+#define PFUZE100_VSNVS 7
-+#define PFUZE100_VREFDDR 8
-+#define PFUZE100_VGEN1 9
-+#define PFUZE100_VGEN2 10
-+#define PFUZE100_VGEN3 11
-+#define PFUZE100_VGEN4 12
-+#define PFUZE100_VGEN5 13
-+#define PFUZE100_VGEN6 14
-+#define PFUZE100_MAX_REGULATOR 15
-+
-+struct regulator_init_data;
-+
-+struct pfuze_regulator_platform_data {
-+ struct regulator_init_data *init_data[PFUZE100_MAX_REGULATOR];
-+};
-+
-+#endif /* __LINUX_REG_PFUZE100_H */
diff --git a/target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch b/target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch
deleted file mode 100644
index 2a9fdff..0000000
--- a/target/linux/imx6/patches-3.10/0020-regulator-pfuze100-REGULATOR_PFUZE100-needs-to-selec.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From: Axel Lin <axel.lin@ingics.com>
-Subject: [PATCH] regulator: pfuze100: REGULATOR_PFUZE100 needs to select
- REGMAP_I2C
-
-This fixes below build errors:
-
- CC [M] drivers/regulator/pfuze100-regulator.o
-drivers/regulator/pfuze100-regulator.c:342:21: error: variable 'pfuze_regmap_config' has initializer but incomplete type
-drivers/regulator/pfuze100-regulator.c:343:2: error: unknown field 'reg_bits' specified in initializer
-drivers/regulator/pfuze100-regulator.c:343:2: warning: excess elements in struct initializer [enabled by default]
-drivers/regulator/pfuze100-regulator.c:343:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
-drivers/regulator/pfuze100-regulator.c:344:2: error: unknown field 'val_bits' specified in initializer
-drivers/regulator/pfuze100-regulator.c:344:2: warning: excess elements in struct initializer [enabled by default]
-drivers/regulator/pfuze100-regulator.c:344:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
-drivers/regulator/pfuze100-regulator.c:345:2: error: unknown field 'max_register' specified in initializer
-drivers/regulator/pfuze100-regulator.c:345:2: warning: excess elements in struct initializer [enabled by default]
-drivers/regulator/pfuze100-regulator.c:345:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
-drivers/regulator/pfuze100-regulator.c:346:2: error: unknown field 'cache_type' specified in initializer
-drivers/regulator/pfuze100-regulator.c:346:2: warning: excess elements in struct initializer [enabled by default]
-drivers/regulator/pfuze100-regulator.c:346:2: warning: (near initialization for 'pfuze_regmap_config') [enabled by default]
-drivers/regulator/pfuze100-regulator.c: In function 'pfuze100_regulator_probe':
-drivers/regulator/pfuze100-regulator.c:370:2: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration]
-drivers/regulator/pfuze100-regulator.c:370:21: warning: assignment makes pointer from integer without a cast [enabled by default]
-cc1: some warnings being treated as errors
-make[2]: *** [drivers/regulator/pfuze100-regulator.o] Error 1
-make[1]: *** [drivers/regulator] Error 2
-make: *** [drivers] Error 2
-
-Signed-off-by: Axel Lin <axel.lin@ingics.com>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- drivers/regulator/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/regulator/Kconfig
-+++ b/drivers/regulator/Kconfig
-@@ -303,6 +303,7 @@ config REGULATOR_PCF50633
- config REGULATOR_PFUZE100
- tristate "Support regulators on Freescale PFUZE100 PMIC"
- depends on I2C
-+ select REGMAP_I2C
- help
- Say y here to support the regulators found on the Freescale PFUZE100
- PMIC.
diff --git a/target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch b/target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch
deleted file mode 100644
index 488edb6..0000000
--- a/target/linux/imx6/patches-3.10/0021-regulator-pfuze100-fix-build-warning-and-correct-the.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Robin Gong <b38343@freescale.com>
-Subject: [PATCH] regulator:pfuze100: fix build warning and correct the binding
- doc
-
-fix building warning and correct the binding doc
-
-Signed-off-by: Robin Gong <b38343@freescale.com>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- Documentation/devicetree/bindings/regulator/pfuze100.txt | 2 ++
- drivers/regulator/pfuze100-regulator.c | 2 +-
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
-+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
-@@ -3,6 +3,8 @@ PFUZE100 family of regulators
- Required properties:
- - compatible: "fsl,pfuze100"
- - reg: I2C slave address
-+
-+Required child node:
- - regulators: This is the list of child nodes that specify the regulator
- initialization data for defined regulators. Please refer to below doc
- Documentation/devicetree/bindings/regulator/regulator.txt.
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -295,7 +295,7 @@ static inline struct device_node *match_
- #else
- static int pfuze_parse_regulators_dt(struct pfuze_chip *chip)
- {
-- return NULL;
-+ return 0;
- }
-
- static inline struct regulator_init_data *match_init_data(int index)
diff --git a/target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch b/target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch
deleted file mode 100644
index dfdefe7..0000000
--- a/target/linux/imx6/patches-3.10/0022-regulator-pfuze100-add-MODULE_LICENSE-in-pfuze100-dr.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Robin Gong <b38343@freescale.com>
-Subject: [PATCH] regulator: pfuze100: add MODULE_LICENSE() in pfuze100 driver
-
-Fix building error on x86_64 and i386:
-WARNING: modpost: missing MODULE_LICENSE() in
-drivers/regulator/pfuze100-regulator.o
-
-Signed-off-by: Robin Gong <b38343@freescale.com>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- drivers/regulator/pfuze100-regulator.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -451,4 +451,5 @@ module_i2c_driver(pfuze_driver);
-
- MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
- MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
-+MODULE_LICENSE("GPL v2");
- MODULE_ALIAS("pfuze100-regulator");
diff --git a/target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch b/target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch
deleted file mode 100644
index 609ed05..0000000
--- a/target/linux/imx6/patches-3.10/0023-regulator-pfuze100-Use-i2c_-set-get-_clientdata.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Axel Lin <axel.lin@ingics.com>
-Subject: [PATCH] regulator: pfuze100: Use i2c_[set|get]_clientdata
-
-Since this is a i2c driver, use i2c_[set|get]_clientdata instead of
-dev_[set|get]_drvdata.
-
-Signed-off-by: Axel Lin <axel.lin@ingics.com>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- drivers/regulator/pfuze100-regulator.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -360,7 +360,7 @@ static int pfuze100_regulator_probe(stru
- if (!pfuze_chip)
- return -ENOMEM;
-
-- dev_set_drvdata(&client->dev, pfuze_chip);
-+ i2c_set_clientdata(client, pfuze_chip);
-
- memcpy(pfuze_chip->regulator_descs, pfuze100_regulators,
- sizeof(pfuze_chip->regulator_descs));
-@@ -429,7 +429,7 @@ static int pfuze100_regulator_probe(stru
- static int pfuze100_regulator_remove(struct i2c_client *client)
- {
- int i;
-- struct pfuze_chip *pfuze_chip = dev_get_drvdata(&client->dev);
-+ struct pfuze_chip *pfuze_chip = i2c_get_clientdata(client);
-
- for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
- regulator_unregister(pfuze_chip->regulators[i]);
diff --git a/target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch b/target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch
deleted file mode 100644
index 41ee1fe..0000000
--- a/target/linux/imx6/patches-3.10/0024-regulator-pfuze100-Fix-module-alias-prefix.patch
+++ /dev/null
@@ -1,19 +0,0 @@
-From: Axel Lin <axel.lin@ingics.com>
-Subject: [PATCH] regulator: pfuze100: Fix module alias prefix
-
-i2c drivers use "i2c:" prefix for module alias.
-
-Signed-off-by: Axel Lin <axel.lin@ingics.com>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- drivers/regulator/pfuze100-regulator.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -452,4 +452,4 @@ module_i2c_driver(pfuze_driver);
- MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
- MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100 PMIC");
- MODULE_LICENSE("GPL v2");
--MODULE_ALIAS("pfuze100-regulator");
-+MODULE_ALIAS("i2c:pfuze100-regulator");
diff --git a/target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch b/target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch
deleted file mode 100644
index 0821991..0000000
--- a/target/linux/imx6/patches-3.10/0025-regulator-pfuze100-Use-regulator_map_voltage_ascend.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Axel Lin <axel.lin@ingics.com>
-Subject: [PATCH] regulator: pfuze100: Use regulator_map_voltage_ascend
-
-All table based voltage list have ascendant order.
-Use regulator_map_voltage_ascend for them.
-
-Signed-off-by: Axel Lin <axel.lin@ingics.com>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- drivers/regulator/pfuze100-regulator.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -144,6 +144,7 @@ static struct regulator_ops pfuze100_sw_
-
- static struct regulator_ops pfuze100_swb_regulator_ops = {
- .list_voltage = regulator_list_voltage_table,
-+ .map_voltage = regulator_map_voltage_ascend,
- .set_voltage_sel = regulator_set_voltage_sel_regmap,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
-
diff --git a/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch b/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch
deleted file mode 100644
index 026ecce..0000000
--- a/target/linux/imx6/patches-3.10/0026-regulator-pfuze100-Fix-n_voltages-setting-for-SW2-SW.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From: Axel Lin <axel.lin@ingics.com>
-Subject: [PATCH] regulator: pfuze100: Fix n_voltages setting for SW2~SW4 with
- high bit set
-
-Current code adjust min_uV and uV_step but missed adjusting the n_voltages
-setting.
-
-When BIT6 is clear:
- n_voltages = (1975000 - 400000) / 25000 + 1 = 64
-When BIT6 is set:
- n_voltages = (3300000 - 800000) / 50000 + 1 = 51
-
-The n_voltages needs update because when BIT6 is set 0x73 ~ 0x7f are reserved.
-When using regulator_list_voltage_linear, the n_voltages does matter here
-because wrong n_voltages setting make the equation return wrong result.
-e.g. if selector is 63, regulator_list_voltage_linear returns
- 800000 + (50000 * 63) = 4000000
- It should return -EINVAL if the selector is in the range of 51 ~ 63.
-
-Signed-off-by: Axel Lin <axel.lin@ingics.com>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- drivers/regulator/pfuze100-regulator.c | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -388,8 +388,11 @@ static int pfuze100_regulator_probe(stru
-
- for (i = 0; i < PFUZE100_MAX_REGULATOR; i++) {
- struct regulator_init_data *init_data;
-+ struct regulator_desc *desc;
- int val;
-
-+ desc = &pfuze_chip->regulator_descs[i].desc;
-+
- if (pdata)
- init_data = pdata->init_data[i];
- else
-@@ -397,13 +400,11 @@ static int pfuze100_regulator_probe(stru
-
- /* SW2~SW4 high bit check and modify the voltage value table */
- if (i > PFUZE100_SW1C && i < PFUZE100_SWBST) {
-- regmap_read(pfuze_chip->regmap, PFUZE100_SW2VOL +
-- (i - PFUZE100_SW2) * 7, &val);
-+ regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val);
- if (val & 0x40) {
-- pfuze_chip->regulator_descs[i].desc.min_uV
-- = 800000;
-- pfuze_chip->regulator_descs[i].desc.uV_step
-- = 50000;
-+ desc->min_uV = 800000;
-+ desc->uV_step = 50000;
-+ desc->n_voltages = 51;
- }
- }
-
-@@ -412,8 +413,7 @@ static int pfuze100_regulator_probe(stru
- config.driver_data = pfuze_chip;
- config.of_node = match_of_node(i);
-
-- pfuze_chip->regulators[i] = regulator_register(&pfuze_chip
-- ->regulator_descs[i].desc, &config);
-+ pfuze_chip->regulators[i] = regulator_register(desc, &config);
- if (IS_ERR(pfuze_chip->regulators[i])) {
- dev_err(&client->dev, "register regulator%s failed\n",
- pfuze100_regulators[i].desc.name);
diff --git a/target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch b/target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch
deleted file mode 100644
index 1089dff..0000000
--- a/target/linux/imx6/patches-3.10/0027-regulator-pfuze100-Simplify-pfuze100_set_ramp_delay-.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: Axel Lin <axel.lin@ingics.com>
-Subject: [PATCH] regulator: pfuze100: Simplify pfuze100_set_ramp_delay
- implementation
-
-Simplify the equation to calculate ramp_delay.
-Below equations are equivalent:
- ramp_delay = 25000 / (2 * ramp_delay);
- ramp_delay = 50000 / (4 * ramp_delay);
- ramp_delay = 25000 / (2 * ramp_delay);
- ramp_delay = 12500 / ramp_delay;
-So we don't need to read BIT6 of rdev->desc->vsel_reg for applying different
-equations.
-
-Also use rdev->desc->vsel_reg instead of run-time calculate register address.
-
-Signed-off-by: Axel Lin <axel.lin@ingics.com>
-Reviewed-by: Robin Gong <b38343@freescale.com>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- drivers/regulator/pfuze100-regulator.c | 21 +++++----------------
- 1 file changed, 5 insertions(+), 16 deletions(-)
-
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -93,26 +93,15 @@ static int pfuze100_set_ramp_delay(struc
- {
- struct pfuze_chip *pfuze100 = rdev_get_drvdata(rdev);
- int id = rdev->desc->id;
-- unsigned int val, ramp_bits, reg;
-+ unsigned int ramp_bits;
- int ret;
-
- if (id < PFUZE100_SWBST) {
-- if (id == PFUZE100_SW1AB)
-- reg = PFUZE100_SW1ABVOL;
-- else
-- reg = PFUZE100_SW1CVOL + (id - PFUZE100_SW1C) * 7;
-- regmap_read(pfuze100->regmap, reg, &val);
--
-- if (id <= PFUZE100_SW1C)
-- ramp_delay = 25000 / (2 * ramp_delay);
-- else if (val & 0x40)
-- ramp_delay = 50000 / (4 * ramp_delay);
-- else
-- ramp_delay = 25000 / (2 * ramp_delay);
--
-+ ramp_delay = 12500 / ramp_delay;
- ramp_bits = (ramp_delay >> 1) - (ramp_delay >> 3);
-- ret = regmap_update_bits(pfuze100->regmap, reg + 4 , 0xc0,
-- ramp_bits << 6);
-+ ret = regmap_update_bits(pfuze100->regmap,
-+ rdev->desc->vsel_reg + 4,
-+ 0xc0, ramp_bits << 6);
- if (ret < 0)
- dev_err(pfuze100->dev, "ramp failed, err %d\n", ret);
- } else
diff --git a/target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch b/target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch
deleted file mode 100644
index 34ff796..0000000
--- a/target/linux/imx6/patches-3.10/0028-regulator-pfuze100-Fix-off-by-one-for-max_register-s.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: Axel Lin <axel.lin@ingics.com>
-Subject: [PATCH] regulator: pfuze100: Fix off-by-one for max_register setting
-
-max_register should be register count - 1.
-
-Signed-off-by: Axel Lin <axel.lin@ingics.com>
-Reviewed-by: Robin Gong <b38343@freescale.com>
-Signed-off-by: Mark Brown <broonie@linaro.org>
----
- drivers/regulator/pfuze100-regulator.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -332,7 +332,7 @@ static int pfuze_identify(struct pfuze_c
- static const struct regmap_config pfuze_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-- .max_register = PFUZE_NUMREGS,
-+ .max_register = PFUZE_NUMREGS - 1,
- .cache_type = REGCACHE_RBTREE,
- };
-
diff --git a/target/linux/imx6/patches-3.10/0029-regulator-pfuze100-allow-misprogrammed-ID.patch b/target/linux/imx6/patches-3.10/0029-regulator-pfuze100-allow-misprogrammed-ID.patch
deleted file mode 100644
index 8c0a92b..0000000
--- a/target/linux/imx6/patches-3.10/0029-regulator-pfuze100-allow-misprogrammed-ID.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: [PATCH] regulator: pfuze100: allow misprogrammed ID
-
-prior to week 08 of 2013 Freescale misprogrammed between 1 and 3% of
-PFUZE1000 parts with a ID=0x8 instead of the expected ID=0x0
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/regulator/pfuze100-regulator.c | 12 +++++++++---
- 1 file changed, 9 insertions(+), 3 deletions(-)
-
---- a/drivers/regulator/pfuze100-regulator.c
-+++ b/drivers/regulator/pfuze100-regulator.c
-@@ -308,9 +308,15 @@ static int pfuze_identify(struct pfuze_c
- if (ret)
- return ret;
-
-- if (value & 0x0f) {
-- dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
-- return -ENODEV;
-+ switch (value & 0x0f) {
-+ /* Freescale misprogrammed 1-3% of parts prior to week 8 of 2013 as ID=8 */
-+ case 0x8:
-+ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8");
-+ case 0x0:
-+ break;
-+ default:
-+ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value);
-+ return -ENODEV;
- }
-
- ret = regmap_read(pfuze_chip->regmap, PFUZE100_REVID, &value);
diff --git a/target/linux/imx6/patches-3.10/0030-pcie-designware-fix-io-transfers.patch b/target/linux/imx6/patches-3.10/0030-pcie-designware-fix-io-transfers.patch
deleted file mode 100644
index 1d3e839..0000000
--- a/target/linux/imx6/patches-3.10/0030-pcie-designware-fix-io-transfers.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From: Pratyush Anand <pratyush.anand@st.com>
-
-pp->io_base which is the input of the outbound IO address translation
-unit should be the cpu address, it was programmed wrongly to realio
-address.
-
-We should pass global_io_offset rather than sys->io_offset to
-pci_ioremap_io, so we map the new window into the first available spot
-in the Linux view of the I/O space.
-
-We must also pass cpu address instead of realio address to
-pci_ioremap_io.
-
-This patch fixes above issue. It has been tested with Lecroy PTC in AIC
-mode and Pericom PI7C9X2G303EL PCIe switch, which does not work
-otherwise.
-
-Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
-Tested-by: Mohit Kumar <mohit.kumar@st.com>
-Tested-by: Tim Harvey <tharvey@gateworks.com>
-Cc: Arnd Bergmann <arnd@arndb.de>
-Cc: Marek Vasut <marex@denx.de>
-Cc: Richard Zhu <Hong-Xing.Zhu@freescale.com>
-Cc: linux-pci@vger.kernel.org
-Cc: spear-devel@list.st.com
----
- drivers/pci/host/pcie-designware.c | 5 ++---
- 1 files changed, 2 insertions(+), 3 deletions(-)
-
-http://thread.gmane.org/gmane.linux.kernel.pci/27204
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -177,6 +177,7 @@ int __init dw_pcie_host_init(struct pcie
- + global_io_offset);
- pp->config.io_size = resource_size(&pp->io);
- pp->config.io_bus_addr = range.pci_addr;
-+ pp->io_base = range.cpu_addr;
- }
- if (restype == IORESOURCE_MEM) {
- of_pci_range_to_resource(&range, np, &pp->mem);
-@@ -202,7 +203,6 @@ int __init dw_pcie_host_init(struct pcie
-
- pp->cfg0_base = pp->cfg.start;
- pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
-- pp->io_base = pp->io.start;
- pp->mem_base = pp->mem.start;
-
- pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
-@@ -449,7 +449,7 @@ int dw_pcie_setup(int nr, struct pci_sys
-
- if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
- sys->io_offset = global_io_offset - pp->config.io_bus_addr;
-- pci_ioremap_io(sys->io_offset, pp->io.start);
-+ pci_ioremap_io(global_io_offset, pp->io_base);
- global_io_offset += SZ_64K;
- pci_add_resource_offset(&sys->resources, &pp->io,
- sys->io_offset);
diff --git a/target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch b/target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch
deleted file mode 100644
index 0546d9c..0000000
--- a/target/linux/imx6/patches-3.10/0031-PCI-imx6-init-must-be-early.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 8c8c877d8490c9d51210ee9e90d5f4d740f115c9 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 17 Oct 2013 15:55:47 -0700
-Subject: [PATCH 3/5] PCI: imx6: init must be early
-
-If driver init is not early the pcie port driver gets initalized
-first and interrupts are not configured for the imx6 pcie driver.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/pci/host/pci-imx6.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -568,7 +568,7 @@ static int __init imx6_pcie_init(void)
- {
- return platform_driver_probe(&imx6_pcie_driver, imx6_pcie_probe);
- }
--module_init(imx6_pcie_init);
-+fs_initcall(imx6_pcie_init);
-
- MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
- MODULE_DESCRIPTION("Freescale i.MX6 PCIe host controller driver");
diff --git a/target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch b/target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch
deleted file mode 100644
index 5cef411..0000000
--- a/target/linux/imx6/patches-3.10/0032-PCI-imx6-fix-imprecise-abort-handler.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 8590081d5328fe59d4f72aaadafb47fb91d8dc7c Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 17 Oct 2013 15:52:16 -0700
-Subject: [PATCH] PCI: imx6: fix imprecise abort handler
-
-An imprecise abort is triggered when a port behind a switch is accessed
-and no device is present. At enumeration, imprecise aborts are not enabled
-thus this ends up getting deferred until the kernel has completed init. At
-that point we must not adjust PC - the handler must do nothing, but a handler
-must exist.
-
-This fixes random crashes that occur right after freeing init.
-This is against linux-pci/host-imx6.
-
-Acked-by: Marek Vasut <marex@denx.de>
-Tested-by: Marek Vasut <marex@denx.de>
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/pci/host/pci-imx6.c | 6 ------
- 1 file changed, 6 deletions(-)
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -200,12 +200,6 @@ static int pcie_phy_write(void __iomem *
- static int imx6q_pcie_abort_handler(unsigned long addr,
- unsigned int fsr, struct pt_regs *regs)
- {
-- /*
-- * If it was an imprecise abort, then we need to correct the
-- * return address to be _after_ the instruction.
-- */
-- if (fsr & (1 << 10))
-- regs->ARM_pc += 4;
- return 0;
- }
-
diff --git a/target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch b/target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch
deleted file mode 100644
index a94a166..0000000
--- a/target/linux/imx6/patches-3.10/0033-PCI-imx6-increase-link-startup.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 11e8d0ed8cc3b415767961555efc2885791a9391 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Thu, 17 Oct 2013 15:57:28 -0700
-Subject: [PATCH 4/5] PCI: imx6: increase link startup
-
-An increase link startup delay is required when certain PCI switches are
-attached to the root complex.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/pci/host/pci-imx6.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -318,7 +318,7 @@ static void imx6_pcie_host_init(struct p
- while (!dw_pcie_link_up(pp)) {
- usleep_range(100, 1000);
- count++;
-- if (count >= 10) {
-+ if (count >= 200) {
- dev_err(pp->dev, "phy link never came up\n");
- dev_dbg(pp->dev,
- "DEBUG_R0: 0x%08x, DEBUG_R1: 0x%08x\n",
diff --git a/target/linux/imx6/patches-3.10/0034-PCI-imx6-add-support-for-legacy-irqs.patch b/target/linux/imx6/patches-3.10/0034-PCI-imx6-add-support-for-legacy-irqs.patch
deleted file mode 100644
index 03f29f4..0000000
--- a/target/linux/imx6/patches-3.10/0034-PCI-imx6-add-support-for-legacy-irqs.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: [PATCH] PCI: imx6: add support for legacy irqs
-
-The i.MX6 supports legacy IRQ's via 155,154,153,152. When devices
-are behind a PCIe-to-PCIe switch (at least for the TI XIO2001) the
-mapping is reversed from when they are behind a PCIe switch.
-
-This patch still needs some review and clarification before going
-upstream.
----
- drivers/pci/host/pcie-designware.c | 21 ++++++++++++++++++++-
- 1 file changed, 20 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/host/pcie-designware.c
-+++ b/drivers/pci/host/pcie-designware.c
-@@ -482,7 +482,26 @@ int dw_pcie_map_irq(const struct pci_dev
- {
- struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
-
-- return pp->irq;
-+ /* TI XIO2001 PCIe-to-PCI bridge IRQs are flipped it seems */
-+ if ( dev->bus && dev->bus->self
-+ && (dev->bus->self->vendor == 0x104c)
-+ && (dev->bus->self->device == 0x8240)) {
-+ switch (pin) {
-+ case 1: return pp->irq - 3;
-+ case 2: return pp->irq - 2;
-+ case 3: return pp->irq - 1;
-+ case 4: return pp->irq;
-+ default: return -1;
-+ }
-+ } else {
-+ switch (pin) {
-+ case 1: return pp->irq;
-+ case 2: return pp->irq - 1;
-+ case 3: return pp->irq - 2;
-+ case 4: return pp->irq - 3;
-+ default: return -1;
-+ }
-+ }
- }
-
- static struct hw_pci dw_pci = {
diff --git a/target/linux/imx6/patches-3.10/0050-sky2-allow-mac-to-come-from-dt.patch b/target/linux/imx6/patches-3.10/0050-sky2-allow-mac-to-come-from-dt.patch
deleted file mode 100644
index 54743a5..0000000
--- a/target/linux/imx6/patches-3.10/0050-sky2-allow-mac-to-come-from-dt.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: [PATCH] sky2: allow mac to come from dt
-
-The driver reads the mac address from the device registers which would
-need to have been programmed by the bootloader. This patch adds
-the ability to pull the mac from devicetree via the aliases/sky2 node.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/net/ethernet/marvell/sky2.c | 33 ++++++++++++++++++++++++++++++++-
- 1 file changed, 32 insertions(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/marvell/sky2.c
-+++ b/drivers/net/ethernet/marvell/sky2.c
-@@ -44,6 +44,8 @@
- #include <linux/prefetch.h>
- #include <linux/debugfs.h>
- #include <linux/mii.h>
-+#include <linux/of_device.h>
-+#include <linux/of_net.h>
-
- #include <asm/irq.h>
-
-@@ -4748,6 +4750,7 @@ static struct net_device *sky2_init_netd
- {
- struct sky2_port *sky2;
- struct net_device *dev = alloc_etherdev(sizeof(*sky2));
-+ unsigned char *iap, tmpaddr[ETH_ALEN];
-
- if (!dev)
- return NULL;
-@@ -4802,8 +4805,36 @@ static struct net_device *sky2_init_netd
-
- dev->features |= dev->hw_features;
-
-+ /*
-+ * try to get mac address in the following order:
-+ * 1) from device tree data
-+ * 2) from internal registers set by bootloader
-+ */
-+ iap = NULL;
-+ if (IS_ENABLED(CONFIG_OF)) {
-+ struct device_node *np;
-+ np = of_find_node_by_path("/aliases");
-+ if (np) {
-+ const char *path = of_get_property(np, "sky2", NULL);
-+ if (path)
-+ np = of_find_node_by_path(path);
-+ if (np)
-+ path = of_get_mac_address(np);
-+ if (path)
-+ iap = (unsigned char *) path;
-+ }
-+ }
-+
-+ /*
-+ * 2) mac registers set by bootloader
-+ */
-+ if (!iap || !is_valid_ether_addr(iap)) {
-+ memcpy_fromio(&tmpaddr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
-+ iap = &tmpaddr[0];
-+ }
-+
- /* read the mac address */
-- memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port * 8, ETH_ALEN);
-+ memcpy(dev->dev_addr, iap, ETH_ALEN);
-
- return dev;
- }
diff --git a/target/linux/imx6/patches-3.10/0060-flexcan.patch b/target/linux/imx6/patches-3.10/0060-flexcan.patch
deleted file mode 100644
index 11a66c5..0000000
--- a/target/linux/imx6/patches-3.10/0060-flexcan.patch
+++ /dev/null
@@ -1,92 +0,0 @@
---- a/arch/arm/boot/dts/imx6q.dtsi
-+++ b/arch/arm/boot/dts/imx6q.dtsi
-@@ -163,6 +163,31 @@
- };
- };
-
-+ flexcan1 {
-+ pinctrl_flexcan1_1: flexcan1grp-1 {
-+ fsl,pins = <
-+ MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
-+ MX6Q_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
-+ >;
-+ };
-+
-+ pinctrl_flexcan1_2: flexcan1grp-2 {
-+ fsl,pins = <
-+ MX6Q_PAD_GPIO_7__FLEXCAN1_TX 0x80000000
-+ MX6Q_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
-+ >;
-+ };
-+ };
-+
-+ flexcan2 {
-+ pinctrl_flexcan2_1: flexcan2grp-1 {
-+ fsl,pins = <
-+ MX6Q_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
-+ MX6Q_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
-+ >;
-+ };
-+ };
-+
- gpmi-nand {
- pinctrl_gpmi_nand_1: gpmi-nand-1 {
- fsl,pins = <
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -292,13 +292,21 @@
- };
-
- can1: flexcan@02090000 {
-+ compatible = "fsl,imx6q-flexcan";
- reg = <0x02090000 0x4000>;
- interrupts = <0 110 0x04>;
-+ clocks = <&clks 108>, <&clks 109>;
-+ clock-names = "ipg", "per";
-+ status = "disabled";
- };
-
- can2: flexcan@02094000 {
-+ compatible = "fsl,imx6q-flexcan";
- reg = <0x02094000 0x4000>;
- interrupts = <0 111 0x04>;
-+ clocks = <&clks 110>, <&clks 111>;
-+ clock-names = "ipg", "per";
-+ status = "disabled";
- };
-
- gpt: gpt@02098000 {
---- a/arch/arm/boot/dts/imx6dl.dtsi
-+++ b/arch/arm/boot/dts/imx6dl.dtsi
-@@ -80,6 +80,31 @@
- };
- };
-
-+ flexcan1 {
-+ pinctrl_flexcan1_1: flexcan1grp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
-+ MX6DL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
-+ >;
-+ };
-+
-+ pinctrl_flexcan1_2: flexcan1grp-2 {
-+ fsl,pins = <
-+ MX6DL_PAD_GPIO_7__FLEXCAN1_TX 0x80000000
-+ MX6DL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
-+ >;
-+ };
-+ };
-+
-+ flexcan2 {
-+ pinctrl_flexcan2_1: flexcan2grp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
-+ MX6DL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
-+ >;
-+ };
-+ };
-+
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
diff --git a/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch b/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch
deleted file mode 100644
index fd90130..0000000
--- a/target/linux/imx6/patches-3.10/0061-can-flexcan-use-correct-clock-as-base-for-bit-rate-c.patch
+++ /dev/null
@@ -1,37 +0,0 @@
-From 1a3e5173f5e72cbf7f0c8927b33082e361c16d72 Mon Sep 17 00:00:00 2001
-From: Marc Kleine-Budde <mkl@pengutronix.de>
-Date: Mon, 25 Nov 2013 22:15:20 +0100
-Subject: [PATCH] can: flexcan: use correct clock as base for bit rate
- calculation
-
-The flexcan IP core uses the peripheral clock ("per") as basic clock for the
-bit timing calculation. However the driver uses the the wrong clock ("ipg").
-This leads to wrong bit rates if the rates on both clock are different.
-
-This patch fixes the problem by using the correct clock for the bit rate
-calculation.
-
-Cc: linux-stable <stable@vger.kernel.org>
-Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
----
- drivers/net/can/flexcan.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/can/flexcan.c
-+++ b/drivers/net/can/flexcan.c
-@@ -1021,7 +1021,6 @@ static int flexcan_probe(struct platform
- err = PTR_ERR(clk_ipg);
- goto failed_clock;
- }
-- clock_freq = clk_get_rate(clk_ipg);
-
- clk_per = devm_clk_get(&pdev->dev, "per");
- if (IS_ERR(clk_per)) {
-@@ -1029,6 +1028,7 @@ static int flexcan_probe(struct platform
- err = PTR_ERR(clk_per);
- goto failed_clock;
- }
-+ clock_freq = clk_get_rate(clk_per);
- }
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch b/target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch
deleted file mode 100644
index cb26ec8..0000000
--- a/target/linux/imx6/patches-3.10/010-pcie-backport-fixes.patch
+++ /dev/null
@@ -1,45 +0,0 @@
---- a/arch/arm/boot/dts/imx6qdl.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl.dtsi
-@@ -119,7 +119,7 @@
- 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
- num-lanes = <1>;
- interrupts = <0 123 0x04>;
-- clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
-+ clocks = <&clks 189>, <&clks 187>, <&clks 198>, <&clks 144>;
- clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
- status = "disabled";
- };
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -125,3 +125,5 @@ config PCI_IOAPIC
- config PCI_LABEL
- def_bool y if (DMI || ACPI)
- select NLS
-+
-+source "drivers/pci/host/Kconfig"
---- a/drivers/pci/Makefile
-+++ b/drivers/pci/Makefile
-@@ -67,3 +67,6 @@ obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen
- obj-$(CONFIG_OF) += of.o
-
- ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
-+
-+# PCI host controller drivers
-+obj-y += host/
---- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
-+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
-@@ -208,10 +208,10 @@ clocks and IDs.
- pll4_post_div 193
- pll5_post_div 194
- pll5_video_div 195
-- lvds1_sel 204
-- lvds2_sel 205
-- lvds1_gate 206
-- lvds2_gate 207
-+ lvds1_sel 196
-+ lvds2_sel 197
-+ lvds1_gate 198
-+ lvds2_gate 199
-
- Examples:
-
diff --git a/target/linux/imx6/patches-3.10/100-bootargs.patch b/target/linux/imx6/patches-3.10/100-bootargs.patch
deleted file mode 100644
index c10f64b..0000000
--- a/target/linux/imx6/patches-3.10/100-bootargs.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/arm/boot/dts/imx6dl-wandboard.dts
-+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
-@@ -18,6 +18,10 @@
- memory {
- reg = <0x10000000 0x40000000>;
- };
-+
-+ chosen {
-+ bootargs = "console=ttymxc0,115200";
-+ };
- };
-
- &fec {
diff --git a/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch b/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch
deleted file mode 100644
index 1385661..0000000
--- a/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch
+++ /dev/null
@@ -1,263 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -117,6 +117,15 @@ dtb-$(CONFIG_ARCH_MXC) += \
- imx6dl-sabresd.dtb \
- imx6dl-wandboard.dtb \
- imx6q-arm2.dtb \
-+ imx6q-gw51xx.dtb \
-+ imx6q-gw52xx.dtb \
-+ imx6q-gw53xx.dtb \
-+ imx6q-gw54xx.dtb \
-+ imx6q-gw5400-a.dtb \
-+ imx6dl-gw51xx.dtb \
-+ imx6dl-gw52xx.dtb \
-+ imx6dl-gw53xx.dtb \
-+ imx6dl-gw54xx.dtb \
- imx6q-sabreauto.dtb \
- imx6q-sabrelite.dtb \
- imx6q-sabresd.dtb \
---- a/arch/arm/boot/dts/imx6q.dtsi
-+++ b/arch/arm/boot/dts/imx6q.dtsi
-@@ -212,6 +212,30 @@
- MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
-+
-+ /* No strobe */
-+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
-+ fsl,pins = <
-+ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
-+ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
-+ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
- };
-
- i2c1 {
-@@ -230,6 +254,12 @@
- MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
- >;
- };
-+ pinctrl_i2c2_2: i2c2grp-2 {
-+ fsl,pins = <
-+ MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
- };
-
- i2c3 {
-@@ -239,6 +269,12 @@
- MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
- >;
- };
-+ pinctrl_i2c3_2: i2c3grp-2 {
-+ fsl,pins = <
-+ MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
- };
-
- uart1 {
-@@ -248,6 +284,12 @@
- MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
-+ pinctrl_uart1_2: uart1grp-2 {
-+ fsl,pins = <
-+ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart2 {
-@@ -257,6 +299,21 @@
- MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
- >;
- };
-+ pinctrl_uart2_3: uart2grp-3 {
-+ fsl,pins = <
-+ MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-+
-+ uart3 {
-+ pinctrl_uart3_3: uart3grp-3 {
-+ fsl,pins = <
-+ MX6Q_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6Q_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart4 {
-@@ -267,6 +324,15 @@
- >;
- };
- };
-+
-+ uart5 {
-+ pinctrl_uart5_1: uart5grp-1 {
-+ fsl,pins = <
-+ MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-
- usbotg {
- pinctrl_usbotg_1: usbotggrp-1 {
---- a/arch/arm/boot/dts/imx6dl.dtsi
-+++ b/arch/arm/boot/dts/imx6dl.dtsi
-@@ -37,6 +37,18 @@
- compatible = "fsl,imx6dl-iomuxc";
- reg = <0x020e0000 0x4000>;
-
-+ /* shared pinctrl settings */
-+ audmux {
-+ pinctrl_audmux_1: audmux-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x80000000
-+ MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000
-+ MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x80000000
-+ MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x80000000
-+ >;
-+ };
-+ };
-+
- enet {
- pinctrl_enet_1: enetgrp-1 {
- fsl,pins = <
-@@ -105,6 +117,59 @@
- };
- };
-
-+ gpmi-nand {
-+ /* No strobe */
-+ pinctrl_gpmi_nand_2: gpmi-nand-2 {
-+ fsl,pins = <
-+ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
-+ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1
-+ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1
-+ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+ };
-+
-+ i2c1 {
-+ pinctrl_i2c1_1: i2c1grp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ >;
-+ };
-+ };
-+
-+ i2c2 {
-+ pinctrl_i2c2_2: i2c2grp-2 {
-+ fsl,pins = <
-+ MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+ };
-+
-+ i2c3 {
-+ pinctrl_i2c3_2: i2c3grp-2 {
-+ fsl,pins = <
-+ MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+ };
-+
- uart1 {
- pinctrl_uart1_1: uart1grp-1 {
- fsl,pins = <
-@@ -112,6 +177,30 @@
- MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
- >;
- };
-+ pinctrl_uart1_2: uart1grp-2 {
-+ fsl,pins = <
-+ MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-+
-+ uart2 {
-+ pinctrl_uart2_3: uart2grp-3 {
-+ fsl,pins = <
-+ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-+
-+ uart3 {
-+ pinctrl_uart3_3: uart3grp-3 {
-+ fsl,pins = <
-+ MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
- };
-
- uart4 {
-@@ -123,7 +212,22 @@
- };
- };
-
-+ uart5 {
-+ pinctrl_uart5_1: uart5grp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+ };
-+
- usbotg {
-+ pinctrl_usbotg_1: usbotggrp-1 {
-+ fsl,pins = <
-+ MX6DL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ >;
-+ };
-+
- pinctrl_usbotg_2: usbotggrp-2 {
- fsl,pins = <
- MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
diff --git a/target/linux/imx6/patches-3.10/120-ventana-init.ptach b/target/linux/imx6/patches-3.10/120-ventana-init.ptach
deleted file mode 100644
index 2dd91d2..0000000
--- a/target/linux/imx6/patches-3.10/120-ventana-init.ptach
+++ /dev/null
@@ -1,70 +0,0 @@
-Many of the Gateworks Ventana boards use a PLX PEX860X PCIe Switch
-and utilize its GPIO outputs as PERST# for downstream ports. This
-patch configures them appropriately during enumeration.
-
-Additionally many of the Ventana boards use CKO1 as the clock input for
-an analog audio codec which is setup here.
-
---- a/arch/arm/mach-imx/mach-imx6q.c
-+++ b/arch/arm/mach-imx/mach-imx6q.c
-@@ -25,6 +25,7 @@
- #include <linux/of_irq.h>
- #include <linux/of_platform.h>
- #include <linux/opp.h>
-+#include <linux/pci.h>
- #include <linux/phy.h>
- #include <linux/regmap.h>
- #include <linux/micrel_phy.h>
-@@ -145,6 +146,42 @@ static void __init imx6q_sabrelite_init(
- imx6q_sabrelite_cko1_setup();
- }
-
-+/*
-+ * fixup for PEX 8909 bridge to configure GPIO1-7 as output High
-+ * as they are used for slots1-7 PERST#
-+ */
-+static void mx6_ventana_pciesw_early_fixup(struct pci_dev *dev)
-+{
-+ u32 dw;
-+
-+ if (!of_machine_is_compatible("gw,ventana"))
-+ return;
-+
-+ if (dev->devfn != 0)
-+ return;
-+
-+ pci_read_config_dword(dev, 0x62c, &dw);
-+ dw |= 0xaaa8; // GPIO1-7 outputs
-+ pci_write_config_dword(dev, 0x62c, dw);
-+
-+ pci_read_config_dword(dev, 0x644, &dw);
-+ dw |= 0xfe; // GPIO1-7 output high
-+ pci_write_config_dword(dev, 0x644, dw);
-+
-+ mdelay(100);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8609,
-+ mx6_ventana_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8606,
-+ mx6_ventana_pciesw_early_fixup);
-+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8604,
-+ mx6_ventana_pciesw_early_fixup);
-+
-+static void __init imx6q_ventana_init(void)
-+{
-+ imx6q_sabrelite_cko1_setup();
-+}
-+
- static void __init imx6q_1588_init(void)
- {
- struct regmap *gpr;
-@@ -163,6 +200,9 @@ static void __init imx6q_usb_init(void)
-
- static void __init imx6q_init_machine(void)
- {
-+ if (of_machine_is_compatible("gw,ventana"))
-+ imx6q_ventana_init();
-+
- if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
- imx6q_sabrelite_init();
-