imx6: drop 3.14

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45371

1 files changed, 0 insertions, 86 deletions

diff --git a/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch b/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch
deleted file mode 100644
index bae5a1f..0000000
--- a/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-This fixes a boot hang observed when the bootloader
-already enabled the PCIe link for it's own use. The
-fundamental problem is that Freescale forgot to wire
-up the core reset, so software doesn't have a sane way
-to get the core into a defined state.
-
-According to the DW PCIe core reference manual configuration
-of the core may only happen when the LTSSM is disabled, so
-this is one of the first things we need to do. Apparently
-this isn't safe to do when the LTSSM is in any other state
-than "detect" as we observe an instant machine hang when
-trying to do so while the link is already up.
-
-As a workaround force LTSSM into detect state right before
-hitting the disable switch.
-
-Reported-by: Fabio Estevam <fabio.estevam <at> freescale.com>
-Signed-off-by: Lucas Stach <l.stach <at> pengutronix.de>
-Acked-by: Tim Harvey <tharvey <at> gateworks.com>
---- a/drivers/pci/host/pci-imx6.c
-+++ b/drivers/pci/host/pci-imx6.c
-@@ -52,6 +52,9 @@ struct imx6_pcie {
- 
- /* PCIe Port Logic registers (memory-mapped) */
- #define PL_OFFSET 0x700
-+#define PCIE_PL_PFLR (PL_OFFSET + 0x08)
-+#define PCIE_PL_PFLR_LINK_STATE_MASK		(0x3f << 16)
-+#define PCIE_PL_PFLR_FORCE_LINK			(1 << 15)
- #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28)
- #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c)
- #define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING	(1 << 29)
-@@ -217,6 +220,31 @@ static int imx6q_pcie_abort_handler(unsi
- static int imx6_pcie_assert_core_reset(struct pcie_port *pp)
- {
- 	struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp);
-+	u32 val, gpr1, gpr12;
-+
-+	/*
-+	 * If the bootloader already enabled the link we need some special
-+	 * handling to get the core back into a state where it is safe to
-+	 * touch it for configuration. As there is no dedicated reset signal
-+	 * wired up for MX6QDL, we need to manually force LTSSM into "detect"
-+	 * state before completely disabling LTSSM, which is a prerequisite
-+	 * for core configuration.
-+	 * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong
-+	 * indication that the bootloader activated the link.
-+	 */
-+	regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1);
-+	regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12);
-+
-+	if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) &&
-+	    (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) {
-+		val = readl(pp->dbi_base + PCIE_PL_PFLR);
-+		val &= ~PCIE_PL_PFLR_LINK_STATE_MASK;
-+		val |= PCIE_PL_PFLR_FORCE_LINK;
-+		writel(val, pp->dbi_base + PCIE_PL_PFLR);
-+
-+		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
-+				IMX6Q_GPR12_PCIE_CTL_2, 0 << 10);
-+	}
- 
- 	regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
- 			IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18);
-@@ -627,6 +655,14 @@ static int __init imx6_pcie_probe(struct
- 	return 0;
- }
- 
-+static void imx6_pcie_shutdown(struct platform_device *pdev)
-+{
-+	struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev);
-+
-+	/* bring down link, so bootloader gets clean state in case of reboot */
-+	imx6_pcie_assert_core_reset(&imx6_pcie->pp);
-+}
-+
- static const struct of_device_id imx6_pcie_of_match[] = {
- 	{ .compatible = "fsl,imx6q-pcie", },
- 	{},
-@@ -639,6 +675,7 @@ static struct platform_driver imx6_pcie_
- 		.owner	= THIS_MODULE,
- 		.of_match_table = imx6_pcie_of_match,
- 	},
-+	.shutdown = imx6_pcie_shutdown,
- };
- 
- /* Freescale PCIe driver does not allow module unload */